Search Results

Search found 1228 results on 50 pages for 'asus'.

Page 37/50 | < Previous Page | 33 34 35 36 37 38 39 40 41 42 43 44  | Next Page >

• Linux will not activate wireless after device has been re-enabled

  - by XHR

  Using a Eee 900A netbook by Asus. By pressing Fn + F2, I can disable or enable the wireless chip on the netbook, a blue LED indicates the status. I've been able to connect to wireless networks just fine with this netbook. However, if the wireless chip ever becomes disabled, I have to reboot to get my network connection back. This generally happens when suspending. For some reason the LED will be off and I have to hit Fn + F2 for it to light up again. However, after doing so, Linux will not reconnect to the network. It simply changes the wireless status from "wireless is disabled" to "device not ready". Even worse, I've recently had issues with the chip being enabled at boot, thus making it nearly impossible to get connected. I've searched around on-line but haven't found much of anything useful on this. This happens on all kinds of different distros including Ubuntu 9.10 Netbook, EeeBuntu 4 beta, Jolicloud and Ubuntu 10.04 Netbook.

  Read the article

• Linux cannot alter partition table of main hard disk of my laptop

  - by djechelon

  I run openSUSE 12.2 on my ASUS N76VZ laptop. My problem is that I cannot alter the partition table of first hard disk /dev/sda1. YaST partitioner says it's unreadable, but actually it can read it but not alter it. It doesn't tell me anything else, except that I can wipe the partition table (having to reinstall Windows for the third time). Since I want to create new partitions on that disk, how do I fix the partition table layout? I could create new partition from Windows Computer Management and format them in Linux. I could do this, but it doesn't explain the problem

  Read the article

• Can a consumer wireless router act as both a wireless client and access point?

  - by glibdud

  I'm going to be moving in the future, and integrating my home network into that of my landlord. I wish to maintain an isolated network while using his internet connection, so I'm planning on cascading my router off of his (WAN-to-LAN type configuration). Unfortunately, it looks like it might not be feasible to run a wire between the two. Therefore, I'd like to send my WAN connection over WiFi to his router. At my disposal, I have a WRT54GL (running Shibby's Tomato mod), and I just bought an Asus RT-N66U (I can be flexible with the firmware). My first thought was to set up the WRT as a wireless bridge, then run a wire between that and the N66U's WAN port. I'm reasonably sure I could make that work, but can I eliminate the WRT from the equation altogether? Can the N66U connect to the landlord's WiFi as a client, effectively using that as the WAN port, while simultaneously providing wireless access to my devices on an altogether different WLAN?

  Read the article

• Error 5A - Internal CPU Error

  - by Mitch

  So I built myself a pc for the first time. The machine has been running properly, and without issue, since March of this year. Today after an hour or so of gaming the machine shutdown without warning. Any attempts to reboot have been unsuccessful. I have managed to get it to post, twice, but it doesn't get as far as the OS before it shuts off again. I pulled the second video card so I could see the error code LED and it appears to be showing 5A which matches to "Internal CPU Error". Am I looking at a failed CPU or is this a symptom of another issue? Any feedback you can provide is most appreciated. Here's my parts list: CPU: Intel Core i7-4930K 3.4GHz 6-Core CPU Cooler: Corsair H105 73.0 CFM Liquid Motherboard: Asus X79 Deluxe ATX LGA2011 Ram: G.Skill Ripjaws X Series 32GB (4 x 8GB) DDR3-1600 Video card (x2): EVGA GeForce GTX 770 2GB Power supply: Corsair 1000W ATX12V / EPS12V

  Read the article

• Improving sound quality with remote ESD server

  - by cuu508

  Hi, I'm investigating low-budget ways to get audio from my PC (Ubuntu) to HiFi without wires. I'm currently testing a setup where Asus WL-500gP wireless router runs ESD daemon and has attached USB soundcard which is then plugged into HiFi. I'm testing playback on PC with mpg123-esd and Spotify under Wine. The sound is there, latency is unexpectedly low, but I also hear occassional clicks and some distortion from time to time. I suppose that's because of the low latency and wireless streaming of uncompressed audio--any packet drops, CPU temporarily being busy etc. will cause clicks in sound output. Is there a way around this problem, increasing latency / buffer size somehow perhaps? Streaming using shoutcast protocol seems to be a way out but I have feeling that would be a complex and brittle setup.

  Read the article

• Where can I connect this USB 3.0 cord?

  - by tomsawyer95

  My motherboard has 2 USB 3.o slots in the back, where the usual slots go, but the tower also supports 1 or 2 USB 3.0 ports in the front, above the DVD drive. So, there is a cord coming out of those ports that has an end exactly like the one in the attached picture. I am not able to find a matching port on the mobo, so I presume it doesn't have one, and I would need an adapter or else just leave it inoperable. I have an ASUS P8Z68-V LX and an Antec 900 tower.

  Read the article

• Memory works fine separately, but not together

  - by patersonjs

  I've been given four 1GB Corsair DDR2 memory modules, and am trying to fit them into my computer but am getting BSOD on Windows XP and errors in Memtest86+. I've tried to identify if one particular module is faulty by trying them in pairs. They work fine in pairs, but when all four are inserted, Memtest86+ reports errors. The motherboard is an Asus P5N-E with dual channel support and the modules are all the same model (same speed, capacity and timings) but one pair is a different hardware revision. One is v2.1 and the other is v2.2... the voltages are the same too. Would this minor difference be a possible cause of the problem? I've got the BIOS memory timing settings all at AUTO - should I manually set the timings?

  Read the article

• Home router for higher network loads

  - by Zizzencs

  I'm trying to find a replacement for my ASUS WL500GP router. Some constraints: my ISP now provides 120 Mbit bandwidth - the router must be able to handle it I have 3 computers and a laptop at home - the router must have at least 4 LAN ports and the WAN port I need to be able to do the following in parallel: use bittorrent with ~1000 connections transfer files from one home computer to another at high speed access one home computer from my workplace I don't really need wireless I don't really want two boxes to serve all these purposes. So I was searching for a router with 1 Gbit ports, jumbo frame support and good reviews, but haven't really found a promising candidate so far. Any suggestions?

  Read the article

• Why can't I open programs after watching youtube videos for a while?

  - by manjivsanotsu

  I have recently built a new PC, and it worked fine for a while (1-2 months of no problems whatsoever). However in the recent weeks I noticed that after I watched some youtube videos and closed everything, I can no longer do anything except move the mouse and expand the Startup Menu. If I click on any of the programs on the Start Menu or type a program on the Run text box, it won't open anything. I can't open taskmgr, or windows explorer, or even shut down the PC. I don't have anything else running when I'm watching videos except ZoneAlarm and Avast. The only workaround I can do when this happens is a forced shutdown (holding the power button of my PC), and restart if I wanted to do anything more. But this happens a lot - about 4-5 times a week so I'm worried it would fry up my hardware if I keep on doing this. OS: Windows 7 Other Installed Software: Open Office, Tropico 4 game, Adobe Photoshop Browser used: Google Chrome Hardware: CPU: i7 2600K RAM: 16 GB Motherboard: Asus P8Z68-V GEN3 Hard Drive: 120GB Corsair Force GT SSD Graphics: 2047MB GeForce GTX 560 Ti

  Read the article

• Missing kernel on debian-testing-amd64-DVD-1

  - by Kyrol

  I want to install the Debian testing linux version. But at a certain point of the installation, an error occurs: Impossible to install kernel. a compatible kernel version is missing... … or something like that. I see that the image ISO of the DVD is less than 4GB, but is impossible that there is no compatible kernel version for the system. I have an Asus X53Sc with Intel core I7-2630QM, Geforce GT 520MX.

  Read the article

• Why is my PC boot time slow when USB HDD attached?

  - by John

  I have a USB Hard disk that I am using as a secondary drive just for extra storage. When this is attached and I start my PC the second screen says searching for mass storage dives for about 5 minutes before continuing on. The same happens when I have a USB pen disk attached upon boot. If I attach the device after the PC has loaded then it is very quick however plugging and unplugging is not ideal. Is there away to disable this in the BIOS as I cannot instantly see an option. On boot it informs me I have an American Trends AMIBIOS in the BIOS setup it states the version as v02.58 2006. This is running on a ASUS MV2 Motherboard.

  Read the article

• what are the rules for SLI ( GTX 550 Ti )

  - by equivalent8

  I got ASUS GTX 550 Ti and I want to SLI it with another graphic card. I heard that not all graphic cards are good idea to SLI, (or not all combinations) because sometimes the final performance could be even worse that with one graphic card. Is that true? What are the rules ? ( maybe chip-set needs to be same or something ? ) I was wondering if you can recommend me what Graphic card should I use as with mine. Should I use same one (GTX 550 Ti) ?

  Read the article

• PC reboots instead of shutting down, no software problem. What could be the cause?

  - by DaVinci

  Hi, first of all: I'm not sure if superuser is the right site for my question and google didn't help. I have a pc here that prefers rebooting to shuting down. Everytime I try to shut the pc down it reboots, however it is possible to turn the pc off by pressing the power button. The problem is not windows-specific, the Ubuntu LiveCD does exactly the same that's why I said that it is no software problem. I checked wake on LAN, it is disabled and I also resetted the BIOS settings to factory default. That might not mean that it can't be a BIOS problem but I don't know what else to try here. I did not check any hardware yet but nothing exploded so far. I don't know what could have caused this behaviour as it is not my PC. The Mainboard is a ASUS P5Q-E P45.

  Read the article

• Is my laptop good enough to support my development needs? [closed]

  - by KodeSeeker

  I have an ASUS Pentium-R Dual Core CPU running at 2.20Ghz. It has 4 gb of built in ram, currently running a 64 bit Windows 7 . I just started graduate school and Im wondering whether I should go in for a new laptop or just repair the nagging battery on my current one. My requirements include - -Ability to support IDE's - I may end up running Eclipse, Visual Studio's and the like to help with my work. - Ability to run multiple VM's (not concurrently). Im currently running a Ubuntu 12 and 9 as VM's (not sure if this is overloading the system) - I'm a non gamer so I really dont care about a minor glitch caused by running a uber heavy game. -In addition I will have heavy use of Office Application Software and will be using my computer to watch movies and stream media. Looking forward to your replies and suggestions!

  Read the article

• Seemingly random disconnections on Windows Server 2008 R2

  - by bobblez

  So I have a box running a Windows Server 2008 R2 in my LAN, which is running, among other things, a voip server used by other people. I myself am in the same subnet with the server, while the other users are not. Now, maybe on average twice a day, all the other users get disconnected from the server (and if I take a remote desktop connection to it, I'm not able to open any web pages either). These disconnections usually last only about 5 seconds, but sometimes they may last up to a minute. What could possibly cause this? I have all the updates installed from windows update and the motherboard of the server is asus p5b deluxe (if that is of any interest). edit: Forgot to mention that my own internet connectivity stays intact while the server's does not, and both computers are behind the same router.

  Read the article

• Computer loads BIOS, but won't load OS

  - by LEGEND383

  I have just purchased a brand new motherboard bundle, installed into the old case with the old PSU and the old HDD. I can get into the BIOS, but whenever I try to boot from the HDD, it just sits with the fans going, but nothing is displayed. The moniter works (tested with another machine), and I'd hope there are no problems with the motherboard, CPU or RAM because as I said I only brought them today. The only things I can think of are: The PSU's motherboard connector is a 20-pin, and the motherboard has a 24-pin connector (not a problem with the previous board) The OS is not supported (doesn't seem likly to me, but possible I guess) Here is my system configuration: Motherboard: ASUS F1A55-M le CPU: AMD APU A6 3500 HDD: 1Tb SATA RAM: 4Gb DDR3 OS: Ubuntu Satanic v666.9 PSU: Winpower ATX-400 (this thing is REALLY old) If anyone is able to offer a reason as to why this is not working, or a possible solution, it would be greatly appriciated.

  Read the article

• Netbook won't boot after using EasyBCD

  - by TNC

  I have an Asus T91MT netbook on which I used to have Windows 7 Home Premium and Ubuntu 10.10 installed (dual boot). After trying to upgrade to Ubuntu 11.04, Ubuntu is no longer able to boot, so I tried to uninstall Ubuntu completely and then reinstall it. Following these directions, I tried using EasyBCD to bypass the GRUB2 bootloader so that after uninstalling, it would automatically boot into Windows 7. However, after doing the "install BCD" step and restarting, I got the following message: Windows failed to start... File: \Boot\BCD; Status: 0xc0000098; Info: The Windows Boot Configuration Data file does not contain a valid OS entry. I'm currently trying to create a USB stick of the Windows Installation disc but in the mean time, I can only boot from a Ubuntu USB stick. Is there anything I can do from within Ubuntu to fix this? Or does anyone have any other suggestions/solutions?

  Read the article

• Possible? OpenVPN server requiring both certificate- AND password-based login (via Tomato router firmware)

  - by Eric

  I've been using Shibby's build of Tomato (64k NVRAM version) on my Asus N66U router in order to run an OpenVPN server. I'm curious whether it's possible to setup this OpenVPN server to require both a certificate AND a username/password before a user is allowed access. I noticed there's a "challenge password" entry when filling out the certificate details, but everyone says to leave it blank "or else"; I have no idea why, and I can't find an explanation. In addition, I've Google'd this issue a bunch and have noticed people talking about a PAM module for OpenVPN in order to authenticate via username/password, but that appeared to be an either/or option; in other words, I can force authentication via username/password OR certificate. I want to require both. Is this possible? If so, how?

  Read the article

• A GFX card with two DVI and one HDMI with audio?

  - by TomaszRykala

  I haven't upgraded my PC for a while nor kept up to date with pc hardware since 2007, but have recently come up with a requirement and I am wondering if I can solve it! Are there any graphics cards out there that have two DVIs and one HDMI output, with the HDMI supporting sound over it? Basically, I've got a two PC monitor setup, and both monitors are connected to the two DVI's of my GTX9800+. I want to upgrade my card to say, GTX 460, but can't find if there is such with two DVIs (for my monitors) and one HDMI with audio (for my TV). So I am wondering, if such solution possible at all? I noticed that there are some cards out there with two DVI's and one mini-HDMI, but they all say 'HDMI Output Yes x 1 (via DVI to HDMI adaptor x 1 )', which probably means that because of the DVI element, the audio won't work. Is this true? Such card is an exmaple: http://uk.asus.com/Graphics_Cards/NVIDIA_Series/ENGTX460_DirectCU2DI1GD5/#specifications Many thanks for your help!

  Read the article

• Issues with new graphics card and drivers

  - by Ortund

  With my onboard graphics card (Intel HD 4000) I was able to use 1680x1050 screen resolution. Using the same screen and an Asus ENGTS250 graphics card with 296.10 drivers installed, I'm not able to use that resolution anymore. Also, I've been having other trouble with driver installations. Using 340.52 or 337.88, I can't boot into Windows 7. I see the Windows Welcome screen and then the screen goes black, loses signal and the computer locks up. I think the drivers issues and the resolution problems go hand-in-hand. I have a feeling I could use a newer driver than 296.10 which would give me access to use the 1680x1050 resolution I want to use, but I'm terrified that if I update or install another driver, that the computer will lock up again. Can anyone recommend a [better] driver for me to use?

  Read the article

• Pressing zero key brings up lock/switch user screen in W7

  - by qinghua

  This issue started after my cat walked all over the keyboard... Whenever I press the "zero" key, the screen goes black and I'm taken to the lock/switch user screen. The other functions of the key work fine - it can produce ) and / like usual. Numlock is off, and as far as I know, my computer doesn't have Function Lock. If I log out of my user account and sign in as a guest, the "zero" works again, but if I create a new user profile, it doesn't work. I get the same issue when I hit "zero" using the on-screen keyboard. My keyboard layout is set to US English. I've uninstalled and reinstalled the ATK package, and updated my keyboard drivers. I have an ASUS U43JC-X1 laptop running Windows 7, and I haven't installed any new programs lately.

  Read the article

• Tuning Nvidia driver in Nvidia X Server Settings in Ubuntu to avoid tearing?

  - by c00kiemonster

  I'm running Ubuntu 10.10 on an Asus at3ion motherboard. I have installed the proprietary nvidia drivers and everything is working fine, but it's a but ragged when I move windows etc. I think the issue is called tearing. There is flickering and the window isn't refreshed smoothly. The ion acceleration works fine (I am running xbmc at 1080p completely without any issues). Please note I am not interested in any fancy effects etc, I just want the graphics to be smooth and nice. How can I tune the nvidia driver for this, i.e., what do I need to change in the Nvidia X Server Settings?

  Read the article

• Why does using 2 memory sticks cause my computer to crash?

  - by hi

  My computer randomly crashes when playing games, but if I remove one memory stick (it does not matter which one I remove), it does not crash anymore. Memory tests do not find errors, I just put in a new power supply (650W), I only have 1 graphics card, so why is this happening? BTW, they are the same memory, same vendor same specs, everything I bought it together (2x2GB) My motherboard is a Asus P5Q Pro, so it supports both dual channel and more than 4gb. Switching slots does nothing, as long as I don't use more than 1 I'm fine.

  Read the article

• Western Digital Caviar SE16 not recognized

  - by NStorm

  Before I start, I have been looking at quite a few websites and I still have not found an answer to my problem. I have been building my own computer recently and I have just received the hard drive (WD Caviar SE16 WD5000AAKS) I was planning to put in my computer. After connecting the SATA power cable (99.99999% sure it is connected correctly) and the SATA cable to my motherboard (ASUS M5A78L-M/USB3) I booted my computer into a Linux Mint 13 XFCE 64-bit live USB expecting to see a hard drive when I came to install. Sadly when I checked the only hard drive that was showing was /dev/sda which was my USB with the Linux files on it. I also checked gparted and no hard drive other than my USB was showing up there either. Lastly I checked my BIOS and no matter what SATA port I connected the HDD to it wouldn't show up there either. Does anyone have any advice? Some images of my set-up which could help are bellow: Thanks in advance, Nick

  Read the article

• One motherboard crashed. Changed and wants to crash again

  - by CoachNono

  My computer started to freeze randomly. I was pretty sure it was the hard drive that was starting to fail. Before I could change it, the motherboard was completely dead. I bought the same one and reinstall it. Everything went working well until my computer started to freeze again and doing the same problem has before. I don't want my motherboard to burn again and I'm really wondering what can be the problem... Could it be the power supply or the video cards that burned the motherboard ? I tested the voltages of the power supply and they seemed fine... The computer worked as is for four years... Here are the specs: ASUS P5N-D Motherboard LGA 775 NVIDIA 750i SLI Intel Q6600 2X EN9600GT 512mb 650w Corsair

  Read the article

< Previous Page | 33 34 35 36 37 38 39 40 41 42 43 44  | Next Page >