Search Results

Search found 3180 results on 128 pages for 'david belanger'.

Page 37/128 | < Previous Page | 33 34 35 36 37 38 39 40 41 42 43 44  | Next Page >

  • Windows Service with a Logon user set

    - by David.Chu.ca
    I have a service running in a box with Windows XP and a box of Server (2008). The service is configured as autmactic mode with a logon user/pwd set. The log on user is a local user. The service requires this user setting in order to run. The issue I have right now is that the box intermittently reboot itself. I am going to investigate what is causing the reboot (hardware or application). Regardless the reason, what I need is that the service should be able to recover itself into running state after the reboot. I think the configuration should be able achieve this goal since the user/pwd having been set and its mode being automatic. Do I need to log in as that user to bring the service back? (sometimes the reboot happens in the midnight) I am not sure if there is any difference between Windows XP and Windows Server (2008). The only thing I realize is that when there is a unexpected reboot, the Windows Server will prompt a dialog to explain the previous reboot. Will this prevent any automatic service running or the service will run only the reason has been set?

    Read the article

  • Logitech keboard wrong keys under MAC OSX

    - by David Casillas
    I have a Logitech MK250 keyboard I use with my Macbook. One day the "minor/mayor than" and the "back slash" keys flip their functionality, so I have to hit "backslash" to get a "minor than" symbol and press the "alt + minor than" key to get the "backslash". Is there any way to reverse this annoying behavior? I often switch to Windows, where the keys work the expected way, and I'm always missing the right key.

    Read the article

  • Your home backup strategy

    - by David Pokluda
    What is your recommended backup strategy for home computers? I have two computers - desktop and notebook. All the important data is store on the desktop computer. I am currently using Mozy to backup my data from desktop computer to Mozy servers. What do you use?

    Read the article

  • Upgrading Redmine, activerecord-mysql2-adapter not recognized

    - by David Kaczynski
    For upgrading Redmine from 1.0.1 to 2.1.2, I need to execute the command: rake db:migrate RAILS_ENV=production However, doing so produces the following error: rake aborted! Please install the mysql2 adapter: gem install activerecord-mysql2-adapter (mysql2 is not part of the bundle. Add it to Gemfile.) I have ran gem install activerecord-mysql2-adapter, but I still get the same error when I try to run the rake ... command. How do I get my RoR app to recognize that I have the mysql2 adapter installed already? or Is there something wrong with my activerecord-mysql2-adapter installation? Results of sudo bundle install: Using rake (10.0.0) Using i18n (0.6.1) Using multi_json (1.3.7) Using activesupport (3.2.8) Using builder (3.0.0) Using activemodel (3.2.8) Using erubis (2.7.0) Using journey (1.0.4) Using rack (1.4.1) Using rack-cache (1.2) Using rack-test (0.6.2) Using hike (1.2.1) Using tilt (1.3.3) Using sprockets (2.1.3) Using actionpack (3.2.8) Using mime-types (1.19) Using polyglot (0.3.3) Using treetop (1.4.12) Using mail (2.4.4) Using actionmailer (3.2.8) Using arel (3.0.2) Using tzinfo (0.3.35) Using activerecord (3.2.8) Using activeresource (3.2.8) Using coderay (1.0.8) Using fastercsv (1.5.5) Using rack-ssl (1.3.2) Using json (1.7.5) Using rdoc (3.12) Using thor (0.16.0) Using railties (3.2.8) Using jquery-rails (2.0.3) Using metaclass (0.0.1) Using mocha (0.12.3) Using mysql (2.8.1) Using net-ldap (0.3.1) Using pg (0.14.1) Using ruby-openid (2.1.8) Using rack-openid (1.3.1) Using bundler (1.2.1) Using rails (3.2.8) Using rmagick (2.13.1) Using shoulda (2.11.3) Using sqlite3 (1.3.6) Using yard (0.8.3) [32mYour bundle is complete! Use `bundle show [gemname]` to see where a bundled gem is installed.[0m Results of sudo find / -name "*mysql2*": /var/lib/gems/1.8/doc/mysql2-0.3.11 /var/lib/gems/1.8/doc/activerecord-3.2.9/ri/ActiveRecord/Base/mysql2_connection-c.ri /var/lib/gems/1.8/doc/activerecord-mysql2-adapter-0.0.3 /var/lib/gems/1.8/doc/activerecord-mysql2-adapter-0.0.3/ri/ActiveRecord/Base/em_mysql2_connection-c.ri /var/lib/gems/1.8/doc/activerecord-mysql2-adapter-0.0.3/ri/ActiveRecord/Base/mysql2_connection-c.ri /var/lib/gems/1.8/gems/mysql2-0.3.11 /var/lib/gems/1.8/gems/mysql2-0.3.11/spec/mysql2 /var/lib/gems/1.8/gems/mysql2-0.3.11/mysql2.gemspec /var/lib/gems/1.8/gems/mysql2-0.3.11/lib/mysql2.rb /var/lib/gems/1.8/gems/mysql2-0.3.11/lib/mysql2 /var/lib/gems/1.8/gems/mysql2-0.3.11/lib/mysql2/mysql2.so /var/lib/gems/1.8/gems/mysql2-0.3.11/ext/mysql2 /var/lib/gems/1.8/gems/mysql2-0.3.11/ext/mysql2/mysql2.so /var/lib/gems/1.8/gems/mysql2-0.3.11/ext/mysql2/mysql2_ext.c /var/lib/gems/1.8/gems/mysql2-0.3.11/ext/mysql2/mysql2_ext.h /var/lib/gems/1.8/gems/mysql2-0.3.11/ext/mysql2/mysql2_ext.o /var/lib/gems/1.8/gems/activerecord-3.2.9/lib/active_record/connection_adapters/mysql2_adapter.rb /var/lib/gems/1.8/gems/activerecord-mysql2-adapter-0.0.3 /var/lib/gems/1.8/gems/activerecord-mysql2-adapter-0.0.3/activerecord-mysql2-adapter.gemspec /var/lib/gems/1.8/gems/activerecord-mysql2-adapter-0.0.3/lib/arel/engines/sql/compilers/mysql2_compiler.rb /var/lib/gems/1.8/gems/activerecord-mysql2-adapter-0.0.3/lib/activerecord-mysql2-adapter.rb /var/lib/gems/1.8/gems/activerecord-mysql2-adapter-0.0.3/lib/activerecord-mysql2-adapter /var/lib/gems/1.8/gems/activerecord-mysql2-adapter-0.0.3/lib/active_record/connection_adapters/em_mysql2_adapter.rb /var/lib/gems/1.8/gems/activerecord-mysql2-adapter-0.0.3/lib/active_record/connection_adapters/mysql2_adapter.rb /var/lib/gems/1.8/gems/activerecord-3.2.8/lib/active_record/connection_adapters/mysql2_adapter.rb /var/lib/gems/1.8/cache/mysql2-0.3.11.gem /var/lib/gems/1.8/cache/activerecord-mysql2-adapter-0.0.3.gem /var/lib/gems/1.8/specifications/activerecord-mysql2-adapter-0.0.3.gemspec /var/lib/gems/1.8/specifications/mysql2-0.3.11.gemspec Contents of /usr/share/redmine/Gemfile: source 'http://rubygems.org' gem 'rails', '3.2.8' gem "jquery-rails", "~> 2.0.2" gem "i18n", "~> 0.6.0" gem "coderay", "~> 1.0.6" gem "fastercsv", "~> 1.5.0", :platforms => [:mri_18, :mingw_18, :jruby] gem "builder", "3.0.0" # Optional gem for LDAP authentication group :ldap do gem "net-ldap", "~> 0.3.1" end # Optional gem for OpenID authentication group :openid do gem "ruby-openid", "~> 2.1.4", :require => "openid" gem "rack-openid" end # Optional gem for exporting the gantt to a PNG file, not supported with jruby platforms :mri, :mingw do group :rmagick do # RMagick 2 supports ruby 1.9 # RMagick 1 would be fine for ruby 1.8 but Bundler does not support # different requirements for the same gem on different platforms gem "rmagick", ">= 2.0.0" end end # Database gems platforms :mri, :mingw do group :postgresql do gem "pg", ">= 0.11.0" end group :sqlite do gem "sqlite3" end end platforms :mri_18, :mingw_18 do group :mysql do gem "mysql" end end platforms :mri_19, :mingw_19 do group :mysql do gem "mysql2", "~> 0.3.11" end end platforms :jruby do gem "jruby-openssl" group :mysql do gem "activerecord-jdbcmysql-adapter" end group :postgresql do gem "activerecord-jdbcpostgresql-adapter" end group :sqlite do gem "activerecord-jdbcsqlite3-adapter" end end group :development do gem "rdoc", ">= 2.4.2" gem "yard" end group :test do gem "shoulda", "~> 2.11" # Shoulda does not work nice on Ruby 1.9.3 and seems to need test-unit explicitely. gem "test-unit", :platforms => [:mri_19] gem "mocha", "0.12.3" end local_gemfile = File.join(File.dirname(__FILE__), "Gemfile.local") if File.exists?(local_gemfile) puts "Loading Gemfile.local ..." if $DEBUG # `ruby -d` or `bundle -v` instance_eval File.read(local_gemfile) end # Load plugins' Gemfiles Dir.glob File.expand_path("../plugins/*/Gemfile", __FILE__) do |file| puts "Loading #{file} ..." if $DEBUG # `ruby -d` or `bundle -v` instance_eval File.read(file) end Contents of /usr/share/redmine/Gemfile.lock: GEM remote: http://rubygems.org/ specs: actionmailer (3.2.8) actionpack (= 3.2.8) mail (~> 2.4.4) actionpack (3.2.8) activemodel (= 3.2.8) activesupport (= 3.2.8) builder (~> 3.0.0) erubis (~> 2.7.0) journey (~> 1.0.4) rack (~> 1.4.0) rack-cache (~> 1.2) rack-test (~> 0.6.1) sprockets (~> 2.1.3) activemodel (3.2.8) activesupport (= 3.2.8) builder (~> 3.0.0) activerecord (3.2.8) activemodel (= 3.2.8) activesupport (= 3.2.8) arel (~> 3.0.2) tzinfo (~> 0.3.29) activeresource (3.2.8) activemodel (= 3.2.8) activesupport (= 3.2.8) activesupport (3.2.8) i18n (~> 0.6) multi_json (~> 1.0) arel (3.0.2) builder (3.0.0) coderay (1.0.8) erubis (2.7.0) fastercsv (1.5.5) hike (1.2.1) i18n (0.6.1) journey (1.0.4) jquery-rails (2.0.3) railties (>= 3.1.0, < 5.0) thor (~> 0.14) json (1.7.5) mail (2.4.4) i18n (>= 0.4.0) mime-types (~> 1.16) treetop (~> 1.4.8) metaclass (0.0.1) mime-types (1.19) mocha (0.12.3) metaclass (~> 0.0.1) multi_json (1.3.7) mysql (2.8.1) mysql2 (0.3.11) net-ldap (0.3.1) pg (0.14.1) polyglot (0.3.3) rack (1.4.1) rack-cache (1.2) rack (>= 0.4) rack-openid (1.3.1) rack (>= 1.1.0) ruby-openid (>= 2.1.8) rack-ssl (1.3.2) rack rack-test (0.6.2) rack (>= 1.0) rails (3.2.8) actionmailer (= 3.2.8) actionpack (= 3.2.8) activerecord (= 3.2.8) activeresource (= 3.2.8) activesupport (= 3.2.8) bundler (~> 1.0) railties (= 3.2.8) railties (3.2.8) actionpack (= 3.2.8) activesupport (= 3.2.8) rack-ssl (~> 1.3.2) rake (>= 0.8.7) rdoc (~> 3.4) thor (>= 0.14.6, < 2.0) rake (10.0.0) rdoc (3.12) json (~> 1.4) rmagick (2.13.1) ruby-openid (2.1.8) shoulda (2.11.3) sprockets (2.1.3) hike (~> 1.2) rack (~> 1.0) tilt (~> 1.1, != 1.3.0) sqlite3 (1.3.6) test-unit (2.5.2) thor (0.16.0) tilt (1.3.3) treetop (1.4.12) polyglot polyglot (>= 0.3.1) tzinfo (0.3.35) yard (0.8.3) PLATFORMS ruby DEPENDENCIES activerecord-jdbcmysql-adapter activerecord-jdbcpostgresql-adapter activerecord-jdbcsqlite3-adapter builder (= 3.0.0) coderay (~> 1.0.6) fastercsv (~> 1.5.0) i18n (~> 0.6.0) jquery-rails (~> 2.0.2) jruby-openssl mocha (= 0.12.3) mysql mysql2 (~> 0.3.11) net-ldap (~> 0.3.1) pg (>= 0.11.0) rack-openid rails (= 3.2.8) rdoc (>= 2.4.2) rmagick (>= 2.0.0) ruby-openid (~> 2.1.4) shoulda (~> 2.11) sqlite3 test-unit yard Results of gem list: actionmailer (3.2.9, 3.2.8) actionpack (3.2.9, 3.2.8) activemodel (3.2.9, 3.2.8) activerecord (3.2.9, 3.2.8) activerecord-mysql2-adapter (0.0.3) activeresource (3.2.9, 3.2.8) activesupport (3.2.9, 3.2.8) arel (3.0.2) builder (3.0.0) bundler (1.2.1) coderay (1.0.8) erubis (2.7.0) fastercsv (1.5.5) hike (1.2.1) i18n (0.6.1) journey (1.0.4) jquery-rails (2.0.3) json (1.7.5) mail (2.4.4) metaclass (0.0.1) mime-types (1.19) mocha (0.12.3) multi_json (1.3.7) mysql (2.8.1) mysql2 (0.3.11) net-ldap (0.3.1) pg (0.14.1) polyglot (0.3.3) rack (1.4.1) rack-cache (1.2) rack-openid (1.3.1) rack-ssl (1.3.2) rack-test (0.6.2) rails (3.2.9, 3.2.8) railties (3.2.9, 3.2.8) rake (10.0.0) rdoc (3.12) rmagick (2.13.1) ruby-openid (2.1.8) shoulda (2.11.3) sprockets (2.2.1, 2.1.3) sqlite3 (1.3.6) thor (0.16.0) tilt (1.3.3) treetop (1.4.12) tzinfo (0.3.35) yard (0.8.3) Results of 'bundle show`: Gems included by the bundle: * actionmailer (3.2.8) * actionpack (3.2.8) * activemodel (3.2.8) * activerecord (3.2.8) * activeresource (3.2.8) * activesupport (3.2.8) * arel (3.0.2) * builder (3.0.0) * bundler (1.2.1) * coderay (1.0.8) * erubis (2.7.0) * fastercsv (1.5.5) * hike (1.2.1) * i18n (0.6.1) * journey (1.0.4) * jquery-rails (2.0.3) * json (1.7.5) * mail (2.4.4) * metaclass (0.0.1) * mime-types (1.19) * mocha (0.12.3) * multi_json (1.3.7) * mysql (2.8.1) * net-ldap (0.3.1) * pg (0.14.1) * polyglot (0.3.3) * rack (1.4.1) * rack-cache (1.2) * rack-openid (1.3.1) * rack-ssl (1.3.2) * rack-test (0.6.2) * rails (3.2.8) * railties (3.2.8) * rake (10.0.0) * rdoc (3.12) * rmagick (2.13.1) * ruby-openid (2.1.8) * shoulda (2.11.3) * sprockets (2.1.3) * sqlite3 (1.3.6) * thor (0.16.0) * tilt (1.3.3) * treetop (1.4.12) * tzinfo (0.3.35) * yard (0.8.3)

    Read the article

  • Cannot remove wireless network profile even though admin account is used

    - by David Karlsson
    On my windows computer which is connected to a company domain. I have problems with the wireless networking. First of all the computer fails to connect. Second of all I cannot remove the network from the list of wireless profiles. The properties window simply claims that "This network is administered by the Administartor Account". I am currently logged in as the local administrator. I have also tried creating a new admin account and still get the same problem when trying to remove the network. My computer has only the microsoft security essentials antivirus and some VMWare+virtual box connections that I can figure might interfere, but disabling realtime protection has not helped me on this. I also cannot delete the virtual network adapters from the control panel / network adapters...

    Read the article

  • http proxy caching headers

    - by David Hagan
    I have a service for which I'm about to upgrade the authentication. However, I'm trying to ensure that I make the right decision about where the encryption algorithms occur. I currently have two options: option 1) the authentication module is deployed to the client as a javascript library over https and executes client-side, so that the client can POST back an encrypted string. option 2) the authentication module is kept server-side so that the client need only POST back an unencrypted string. I know that many http proxies cache/log the query-string (and therefore any query parameters), but does anyone know of any http proxies that cache the headers as well? If the headers are being cached, then I'll clearly want to encrypt the password inside the SSL encryption, because to my understanding the headers of an HTTPS request may not always be encrypted (depending on the capabilities of the browser etcetera). Can anyone shed any light on the caching of headers by http proxies? Do you have one that does, or know of one that does?

    Read the article

  • How to recover data files from xampp-windows to xampp-linux after crash?

    - by David Buehler
    My Windows box died after I developed a database in xampp on it; fortunately I have a backup of the entire F:/TestWeb/Xampp partition. Unfortunately, I did not do an Export (nor dump) of the "Lws2" database before the crash. I have replaced the defunct machine with one running Mint7 (based on Ubuntu 9.04 "Jaunty Jackalope") and installed xampp-linux into the /opt partition, so the new xampp now runs fine in /opt/lampp, and says all the elements are secured by passwords (which I just assigned during this installation.) I assumed that Xamp-Windows installed in November would migrate easily to xampp-linux installed iin February -- a bad assumption. It apparently would have been simple if I had known enough to do an Export or a Dump before the crash, but.... The backup was done to a Network Attached Storage drive, which is formatted as "vfat" so the backup does not carry with it any valid ownership permissions from MySql on NTFS. I now see from my backup that the old data resided in \TestWeb\Xampp\Mysql\Data\Lws2\ and consists of 7 ".frm" files which define my tables. The actual data -- I suppose a ".sql" file or files -- has disappeared, and I am resigning myself to two days of retyping it. But I do not wish to do the table layouts all over again. So I copied Data tree to /opt/lampp/Data -- PhpMyAdmin does not see it. So I copied Lws2 tree to /opt/lampp/Lws2 -- PhpMyAdmin does not see it. So I copied Data tree to /opt/lampp/var/mysql/Data -- PhpMyAdmin does not see it. So I copied Lws2 tree to /opt/lampp/var/mysql/Lws2 -- PhpMyAdmin does not see it. So I adjusted all the permissions to stop saying owner "nobody" to owner "root" and gave full permissions to all groups and to all others, with permissions percolating down, in all 4 trees. You guessed it -- PhpMyAdmin does not see any database named Lws2, only its 4 default ones. I double-checked the permissions and rebooted Linux and repeated the tests. At some point in that process I did see PhpMyAdmin showing "lws2(7)" but when I clicked on it I saw a "no table found" message. I have not been able to recreate that experience. Apparently there are some setup files for MySql and for PhpMyAdmin which need to be set up by running a wizard or two or by editing the files directly. I grepped the TestWeb tree and found an old "ldir = "C:TestWeb\Xampp\MySql\" and a "DataDir = C:TestWeb\Xampp\MySql\" in a .php file and in a .bat file, but I cannot find the corresponding config file names on the /opt partition/ -- so it looks as if these wizards have not been run to create them. What config files files does Linux use to setup MySql config files for PhpMyAdmin? What wizards do I need to run to point the MySql engine and the PhpMyAdmin at the folder /opt/lampp/data/ with its lws2 folder inside it? Or which files do I need to edit, with a sample of what it normally says under Linux? Incidentally, I remember I converted from MyISAM with its .MYD and .MYI files to InnoDB after entering only a small amount of the data -- and I do not know what file types to look for -- perhaps my data is still there but under another guise or in another place? Is it something as simple as linux needing to see "/data/" instead of /Data? I will check that out while waiting for a response. If anyone can point me to documentation that discusses this level of detail -- I will read it avidly! In any case, thanks for any clarification you can give on this thorny problem. wizdum

    Read the article

  • Windows 7 and XP Networking

    - by David-Zazeski
    I'm trying to setup a home network between a windows 7 and windows xp machine. I have a small hub. My XP computer has a manually assigned IP address (192.168.0.10) and I set my Windows 7 machine to have a manually assigned IP address (192.168.0.15). The XP computer works, but the Windows 7 machine does not see the network. It says that there is no connectivity. Ping does not work from either machine. Does anyone have any suggestions?

    Read the article

  • How do I paste into the "crosh" terminal in a Chromebook?

    - by David Faux
    I pressed Ctrl + Alt + t while having Chrome open to open a terminal in my Chromebook. How do I paste content into this terminal copied from another tab in Chrome? I have tried Ctrl + v to no avail. I have also tried highlighting text and pasting it via the middle button on my mouse, which failed too. I have also read this article (http://www.servercobra.com/nothing-but-chromebook-for-a-week/) and tried triple clicking my touch pad, but it isn't working for me.

    Read the article

  • How to install ac-R mode in emacs?

    - by David
    I have recently added the file ac-R.el to /usr/local/share/emacs/site-lisp, along with (require 'ac-R) to ~/.emacs Now, when I open emacs with --debug-init, I get the error Debugger entered--Lisp error: (void-variable ac-modes) add-to-list(ac-modes ess-mode) eval-buffer(#<buffer *load*<2>> nil "/usr/local/share/emacs/site-lisp/ac-R.el" nil t) ; Reading at buffer position 7191 load-with-code-conversion("/usr/local/share/emacs/site-lisp/ac-R.el" "/usr/local/share/emacs/site-lisp/ac-R.el" nil t) require(ac-R) eval-buffer(#<buffer *load*> nil "/home/dlebauer/.emacs" nil t) ; Reading at buffer position 3548 load-with-code-conversion("/home/dlebauer/.emacs" "/home/dlebauer/.emacs" t t) load("~/.emacs" t t) #[nil "\205\264 and when clicking on load-with-code-conversion, it says Can't find library /usr/share/emacs/23.1.50/lisp/international/mule.el even though I have installed mule via synaptic (I am using Ubuntu 10.04) How can I get the mule library in the right place?

    Read the article

  • I/O ports vs case holes

    - by David Oneill
    I'm in the midst of building a new desktop (first time building my own). I bought MSI NF750-G55 AM3 NVIDIA nForce 750a SLI HDMI ATX motherboard, and HEC 6C28BS Black / Silver Steel ATX Mid Tower case. When they both arrived, I realized that the I/O panel on the case doesn't have the same holes that the motherboard needs. So my two questions are: 1) What should I have done? Both claim to be ATX. Do I just need to look more carefully at the pictures? 2) What should I do now? Can I just remove the whole panel (leaving empty spaces between and around the different ports? Specifically, will it cause problems to do this? (I'm looking for advice about question 1, but will accept based on question 2)

    Read the article

  • Disable caching on a specific Classic ASP page

    - by David Brunelle
    Hi, Not sure if I really am on the right forum, but if not, just tell me. I have a page that is coded in Classic ASP which is used to send email. We are currently having a problem in which the page seem to be sent twice sometime. Upon checking, we found out that those who have this problem are coming from big organisation, so it was suggested that their server might cache the file for some reason. I would like to know, is there a way in HTML (or Classic ASP) to prevent that from happening? Or is it in IIS that we must set this up? Thanks,

    Read the article

  • How do you manage private queue permissions on a windows server 2008 cluster?

    - by David
    On windows server 2003 there was an option to allow a resource to interact with the desktop, this allowed you to run computer management mmc snap-in on the virtual name of the cluster, allowing you to manage permissions of the private message queues on the cluster. Windows Server 2008 failover clustering has removed that checkbox, so applications can no longer interact with the desktop. My question is then how does one go about managing private queue permissions on the clustered (the virtual name) server?

    Read the article

  • How do I re-enable fast user switching

    - by David Waters
    I am running Windows7 RC1, I have recently installed CheckPoint VPN SecureClient (http://www.checkpoint.com/products/vpn-1_clients/) to connect to my work network. On installation this appears to have disabled Fast User Switching. You will notice "Switch user" is now greyed out. I tried some googleing first and the most popular solution is to remove a registry entry at HKEY_LOCAL_MACHINE \ SOFTWARE \ Microsoft \ Windows NT \ CurrentVersion \ Winlogon \ GinaDLL I have no entry there. Any ideas? Thanks.

    Read the article

  • In Jetty, can NCSARequestLog be configured to auto-detect the time zone?

    - by David Moles
    It looks as though in 2003 or so NCSARequestLog would pick up the system time zone using TimeZone.getDefault().getID(), but in more recent versions it seems as though it's hard-coded to GMT, unless you override it in jetty.xml or programmatically. If true, this kind of annoying, since it means if you don't want GMT logging you have to edit jetty.xml for every installation (not to mention twice a year for daylight saving time). Is there a workaround that will let Jetty pick the time zone up from the system? (X-posted to Stack Overflow.)

    Read the article

  • Where did the text of my .html file go in TextEdit on Mac OS X?

    - by David
    I recently created a .html file in TextEdit on my Mac (Mac OS X 10.5.8). I then opened that .html file in my browser and it showed the page I created just fine. I closed the .html file and TextEdit and refreshed the page. It still worked fine. Then I opened up the .html file in TextEdit again and all the text was gone (the page in the browser still works fine though). Where did all the text go?

    Read the article

  • Programmer configuring a new network

    - by David Lively
    I'm in the process of expanding my home network from a couple of laptops on a wireless Verizon FiOS router to include: Linksys 24-port switch Cisco Pix 515 Cisco 3640 router One new development desktop and three new machines to act as a db server, web server and a backup system. My company is moving offices and we've decommissioned some older hardware, which I was able to pick up for the cost of the labor to move it home from the office. The benefits to working with dedicated web and db servers are very valuable to me. I know very little about network topology, other than that everything plugs into the switch, which then plugs into the cheap Verizon router. (Verizon provides a coax connection that the router must translate into Ethernet before I can use it with any of this equipment). Questions: What is the recommended topology for this equipment? Verizon router - Pix - 3600 - switch? Is the 3600 even necessary or desirable? The Verizon router has one WAN port and 4 client ports, all 10/100. Is there any performance benefit at all to wiring multiple connections from the verizon router to the switch, assuming I don't use the Pix? Should I use the Pix? Software firewalls are a pain, and seem silly if I have a device like this lying around. Anything else I should know? Am I wasting my time with this? I also obtained a 7 foot rack, shelves, patch panels, UPS, patch panels, etc, which are going into a conveniently air conditioned closet. All constructive advice appreciated.

    Read the article

  • Java 6.0 Virtual Machine re-caches application on every load

    - by David Neale
    I have a Java application which is loaded and cached by the JRE and for most users it only needs to cache once unless the application software has changed. However, I have one computer that caches the entire application every time they load it. It is not the version of the JRE, I have that running on other machines. It also works on this machine if logged in as a local admin, just not as a standard user. Does anybody have any ideas on what might be causing this?

    Read the article

  • How seriously should I take ECC correctable error warnings?

    - by David Mackintosh
    I have a pile of Sun X2200-M2 servers. These servers have ECC memory. In some of these servers, I am getting warnings in the eLOM about "correctable ECC errors detected", eg: # ssh regress11 ipmitool sel elist 1 | 05/20/2010 | 14:20:27 | Memory CPU0 DIMM2 | Correctable ECC | Asserted 2 | 05/20/2010 | 14:33:47 | Memory CPU0 DIMM2 | Correctable ECC | Asserted ...some more frequently than others. The kernel on this particular system is throwing EDAC errors as well, although with far more frequency than the eLOM is recording ECC events: EDAC k8 MC0: general bus error: participating processor(local node response), time-out(no timeout) memory transaction type(generic read), mem or i/o(mem access), cache level(generic) MC0: CE page 0x42a194, offset 0x60, grain 8, syndrome 0xf654, row 4, channel 1, label "": k8_edac MC0: CE - no information available: k8_edac Error Overflow set EDAC k8 MC0: extended error code: ECC chipkill x4 error EDAC k8 MC0: general bus error: participating processor(local node response), time-out(no timeout) memory transaction type(generic read), mem or i/o(mem access), cache level(generic) MC0: CE page 0x48cb94, offset 0x10, grain 8, syndrome 0xf654, row 5, channel 1, label "": k8_edac MC0: CE - no information available: k8_edac Error Overflow set EDAC k8 MC0: extended error code: ECC chipkill x4 error Now if the server is detecting Uncorrectable ECC, the system resets, so clearly that's bad and removing/replacing the identified stick or pair corrects the issue. But I am thinking that if the error is Correctable, then there's no immediate issue -- I can treat this as a warning and be prepared to pull the stick/pair if an uncorrectable error starts occurring?

    Read the article

  • Dell SC1435 always requires F1 at boot

    - by David Mackintosh
    I have a Dell PowerEdge SC1435 that has come back after doing duty at a partner site. I am trying to configure it for local use. The only problem I have with it is that every time it boots it always requres a manual F1 press after the POST sequence. The last thing it does is give me the opportunity to configure the BMC, and then it says: Press F1 to continue or press F2 for Setup It will wait there forever (well, at least an hour). Pressing F1 starts the OS booting. I can't see the setting in the BIOS which controls this and I can't find it in the documentation. What am I missing?

    Read the article

  • OS X, Chrome, and Spaces annoyance

    - by David Hollman
    Here's my problem: I use Google Chrome as my web browser on MacOS X Snow Leopard. I am a keyboard shortcut addict, and I use QuickSilver to create keyboard shortcuts for anything I can. One of the most common things that I do is to open a new web browser window. But I use Spaces frequently to partition my tasks that I am currently working on, and when I open a web browser or web page with a QuickSilver trigger, spaces switches to the last space that I used Chrome on and opens a new tab, which often distracts me for hours because it brings me to a different space and thus a different task. I can fix this by right-clicking on the Google Chrome icon and clicking the "New Window" option, which opens a new window on the current space. I have tried to compose an AppleScript to do something like this, with no success. It has become a serious problem. Back when I used Firefox, I solved the problem by changing a preference item that says "Always open pop-up links in a new window" or something like that, which was kind of a sledge hammer approach, but it worked. I can always go back to Firefox, but I thought I'd ask my question here first. Anyone with any ideas?

    Read the article

  • Batch OCR for many PDF files (not already OCRed) ?

    - by David
    Hello, I use Google Desktop Search (I am on Vista) and not all my PDF files are recognized in my archive folder. It is normal as "PDF files that contain scanned images" are not indexed (http://desktop.google.com/support/bin/answer.py?hl=en&answer=90651) So I would like to OCR many of my PDF files that are not already OCRed. My goal : I give the program a folder and it search alone in the subfolders the PDF files that need to be converted into PDF-OCRed files. Note: In the past, if a PDF file was password protected, I removed the password with another batch (paying) tool: verypdf.com "pwdremover" Any (not too much expensive) idea ? I already tried : Finereader 6 pro on xp at the time, but there was no batch processor included... Paperfile paperfile.net which uses Tesseract code.google.com/p/tesseract-ocr/. But the OCR is only PDF to text, not PDF to PDF! There is also another project code.google.com/p/ocropus Thanks in advance ;)

    Read the article

  • Yum lock file problem

    - by David Reynolds
    When there are more than 1 copies of yum running, I get this error: Another app is currently holding the yum lock; waiting for it to exit Is there a way to make yum just exit the first time it can't get the lock rather than stay open waiting for it?

    Read the article

  • Setting my NIC to full duplex

    - by David
    I am trying to optimize the network speed of my Solaris X86 server, and have discovered that the Cisco 3548 that it is connected to has issues with the NIC in my server. The NIC appears to have not been configured fully, and is coming up 100 half-duplex. The 3548 ports are all set to 100 full. Ideally I'd like to have the server set for 100 full, and have been attempting to configure it using ndd commands. However I have had no results. The following command: -bash-3.00# dladm show-dev rtls0 link: unknown speed: 100 Mbps duplex: unknown The NIC shows up as: pci bus 0x0001 cardnum 0x06 function 0x00: vendor 0x10ec device 0x8139 Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ which should be configurable. I have modified the configuration file from auto config (5) to 100 fdx (4) to no avail. If there is no other choice, I could alter the Cisco 3548 to be 100 half-duplex. However, this solution causes huge performance loss. Currently throughput is about 500Kbps, when it should be around 40Mbps.

    Read the article

< Previous Page | 33 34 35 36 37 38 39 40 41 42 43 44  | Next Page >