Search Results

Search found 13401 results on 537 pages for 'external monitor'.

Page 37/537 | < Previous Page | 33 34 35 36 37 38 39 40 41 42 43 44  | Next Page >

• Using an Internal HDD as an External HDD also or an External HDD for installing SAP ?

  - by Asterix

  Is it possible and advisable to use an Internal Hard Drive as an External Hard drive also. I wanted to install SAP ECC 6 on my system which has only 250 GB but atleast 300 GB is required.I wanted to buy an External Drive first, then I heard loading SAP on an External would make it extremely slow. I'll be using it only as a beginer so even if it is a little slow i don't mind. Is it feasible to run such a big application from an External Hard disk ? So can i purchase a 500 or 1 TB Internal Hard disk and use it as an External too by fitting it with the necessary USB 3.0 Hard drive cases and cables ? or should i purchase a External and load SAP onto it ? Thank you.

  Read the article

• Dell L501X Display Port Screen issue

  - by jdflorezPA

  I got a Dell XPS L501X with a mini display port to VGA connector for my External Screen. On Displays it shows me: Acer Technologies 24" (which is the monitor) but only lets me up to 1024x768 resolution (The native resolution of this monitor is 1920x1200). I tried adding a new mode with xrandr, but when I applied it, it reverted back to 1024x768. As far as I know, the display port is controlled by the Intel card, right? Any ideas or suggestions would be appreciated. Thanks Using Ubuntu 11.10 32bit

  Read the article

• Third monitor with AMD cards WITHOUT Eyefinity

  - by Resorath

  I have two AMD Radeon HD 6870 video cards in CrossFireX configuration and I would like to add a third monitor. I understand to use "Eyefinity" you need to use an active mini displayport to DVI adapter. I am not interested in the benefits of "Eyefinity", I just want a third monitor with Windows extended desktop. Is it possible to use either the HDMI head on the first card or the DVI heads from the second card to get a third monitor running without "Eyefinity" and an active adapter?

  Read the article

• How to monitor Windows Server events with Centreon Nagios

  - by Miss M

  I want to monitor events on a Windows Exchange Server (Windows 2008 R2) and have installed NSclient ++ so I can use Centreon Nagios to monitor it. I did a bit of research and came across this question that I found somewhat helpful: How to monitor Windows host with Nagios? Nick Kavadias gave a good answer but it did not provide an explanation on how to configure the Nagios config file in such a way that it would monitor a specific service on the server. So, how do I set up a service in Nagios in such a way that it will detect when a windows event occurs on a server?

  Read the article

• Automatically change resolution when not in dock

  - by jwir3

  I have Ubuntu 11.04 (yep, I know it's old news) on my Lenovo W520. At home, I have a dock with dual monitors. I have a pretty decent setup - things work almost perfectly (hence the reason I'm reluctant to upgrade... that and I'm not 100% sold on Unity). Anyway, the only annoyance I have is that when I'm on travel, I use the laptop screen. When I un-dock the laptop, I need to manually go into nvidia x-server settings and change the resolution from 'Auto' to 1920x1200, or it will think I have two screens, and my mouse pointer will be able to go way off the left side of the screen. This isn't a big deal, but I need to do it every time I restart the x-server (so if I reboot, or have to kill it, etc...) What would be really nice is if there was a way for it to automatically detect whether or not there is external monitors (which it seems to do already), and switch into the mode I select, depending on which monitors are connected. Is there any way to accomplish this? I've posted my xorg.conf file for reference. # nvidia-settings: X configuration file generated by nvidia-settings # nvidia-settings: version 270.29 (buildd@allspice) Fri Feb 25 14:42:07 UTC 2011 # nvidia-xconfig: X configuration file generated by nvidia-xconfig # nvidia-xconfig: version 275.19 ([email protected]) Tue Jul 12 18:35:38 PDT 2011 #Section "Monitor" # Identifier "Monitor1" # VendorName "Lenovo" # ModelName "ThinkpadLCD" # #HorizSync 28.0 - 33.0 # #VertRefresh 43.0 - 72.0 # #Option "DPMS" #EndSection Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" 0 0 InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" Option "Xinerama" "0" EndSection Section "InputDevice" Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" # generated from default Identifier "Keyboard0" Driver "kbd" EndSection Section "Monitor" Identifier "Monitor0" VendorName "Unknown" ModelName "DELL U2410" HorizSync 30.0 - 81.0 VertRefresh 56.0 - 76.0 Option "DPMS" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "Quadro 1000M" Option "RegistryDwords" "EnableBrightnessControl=1" EndSection Section "Screen" # Removed Option "metamodes" "DFP-0: nvidia-auto-select +0+120, DFP-6: nvidia-auto-select +1920+0" # Removed Option "metamodes" "DFP-0: nvidia-auto-select +0+120, DFP-5: nvidia-auto-select +1920+0" # Removed Option "metamodes" "DFP-0: nvidia-auto-select +1920+419, DFP-5: nvidia-auto-select +3840+0, DFP-6: nvidia-auto-select +0+0" # Removed Option "metamodes" "DFP-5: nvidia-auto-select +0+0, DFP-6: 1920x1200 +1920+0" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "NoLogo" "True" Option "TwinViewXineramaInfoOrder" "DFP-0" Option "TwinView" "1" Option "metamodes" "DFP-5: nvidia-auto-select +1920+0, DFP-6: 1920x1200 +0+0" SubSection "Display" Depth 24 EndSubSection EndSection

  Read the article

• How to map a virtual desktop to a monitor in a multiple monitor setup?

  - by t3

  OS: Microsoft Windows Vista SP2, Microsoft Windows 7 My laptop is plugged to a docking station that supports dual monitors, which I use extensively. I have windows placed where I want them. All is well and predictable with this setup until I un-dock. The moment I un-dock all windows that I placed in the secondary monitor piles up in the primary monitor and it is an unholy mess. So, I am looking for a solution where if I use virtual desktops, one of them can be mapped to a monitor and when un-docked what was there in the secondary monitor stays in a virtual desktop. Do you folks know of a tool or workaround that can address my quandary?

  Read the article

• Mac and different Spaces: conserving the windows arragement when changing the external monitor

  - by user10826

  Hi, I use Mac OS X Leopard with 4 different Spaces and an external monitor at workplace, which is located above the laptop. On each Space I work on a different project, with different terminal windows and Xcode and Finder windows. The problem happens when I am at home, then I use an external monitor but now located at left position. When the MacBook wakes up, everything gets messed up and even some windows switch from one space to another. Could I somehow fix it so always the windows belonging to one Space remain there and also the association to main/external monitor even if I change to another external monitor? Thanks

  Read the article

• Hide a 2nd Monitor from a Programs Print Screen

  - by jasondavis

  I run 2 monitors on a PC that also runs a program for the Freelancing site Elance.com. The program they provide, takes screenshots and uploads them to my account for a client to see at different intervals. My goal is to make the screenshot that the program takes and uploads, to somehow only take a shot of my "Main" or "Defualt" monitor and ignore my 2nd monitor. The main reason is my 2nd monitor generally has private data that I do not displayed to the world on a website. Does anyone know if there is any kind of program or trick I can use that will make it appear that I have 1 monitor when a Screenshot is taken? I am not sure how the program does it and how that works as I am a web developer and not a C++ or any kind of low level programmer. If the Elance program simply runs the same function that is called when a PrintScreen key is pressed on a keyboard, then I am thinking it might be possible to maybe trick that into only the default desktop? Any ideas or help would be appreciated, thank you

  Read the article

• Manually change the screen resolution

  - by Dz WarSoldier

  My system: Ubuntu 12.04 LTS. My graphic card: nVidia GeForce gt430. My monitor is Samsung LE26R51B. And my connection is digital (HDMI). The current screen resolution is not good at all, I can't see the top bar and the left one. Here are the available resolutions in settings: 1920*1080 1280*720 960*600 and lower resolutions But with no one of these I can see the top bar in it. They are bigger than the monitor. In Windows 7 I use 1202*670 resolution. How can I change the resolution to what I want exactly?

  Read the article

• How to recognize external hard drive from all local drives in .NET Framework?

  - by biajee

  I've already tried System.IO.DriveType. But it only provides to me with the information of whether it's a removable drive such as floppy disc or a USB flash drive. And a USB external hard drive will be recognized as a local non-removable drive in this case. Furthermore, since there are more than one kinds of external hard drive, for example, USB and IEEE 1394. It's really hard to figure it out from ports. Any information will be appreciated.

  Read the article

• Ubuntu/Nvidia lists DVI dual cable as single

  - by Joseph Mastey

  I have an NVidia Quadro FX 880M graphics card, from which I am trying to drive 2 monitors: my internal laptop montior (15.6", 1920x1080, Nvidia driver says it's running via DisplayPort) and an external 27" monitor (Dell U2711, 2560x1440 native resolution, via DVI). I've hooked the dual DVI cable to the dual DVI port on my dock (Dell PR03X) and installed the proprietary NVidia driver, but I cannot seem to get the full 2560x1440 out of the larger 27" external monitor. Looking at the NVidia driver settings, the monitor's connection is reported as a single DVI cable, rather than a dual one, which would explain the reduced resolution. Does anyone have any experience with an issue like this? What can I do to make full use of my new monitor? (Possibly) Relevant Information: There is no DVI port on the laptop itself, but one is provided via the dock. The laptop and dock both provide a DisplayPort jack, but I have been unable to get this working on either w/ the monitor. I did have the nouveau driver installed when I installed the nvidia proprietary driver, but have since removed it (no change in the monitor situation when I removed it). The 27" reports a max resolution of 1680x1050. Thanks, Joe

  Read the article

• Samsung S23A750D 23" 120Hz get no signal

  - by John Carter

  I have a few days ago received this monitor. Samsung S23A750D 23" 120Hz I am using it with a Gainward Nvidia GTX570 Phantom GPU via DisplayPort cabling. The trouble I am having is that the monitor has great trouble picking up a signal from the GPU when the computer has gone into sleep mode or been switched off (at this point I can get a signal to the monitor). It's only when I turn the computer back on and then the monitor that I get no signal. To get a signal I have to remove the power cable and put back in or sometimes remove the DP cable and put back in. I have tried not turning the monitor off (the monitor goes into a sleep mode when the computer goes into sleep mode) but on putting the computer on it does not pick up a signal. It is only by removing the power cable and/or DisplayPort cable will I get a signal. And this is intermittent. I have tried upgrading the firmware from Samsung but this hasn't helped. Any ideas?

  Read the article

• Prevent Windows from resizing all the apps on the desktop when switching monitors

  - by Greg Hewgill

  Short version: When moving my laptop and sleeping between using different monitors, all my open windows are crammed into the upper left corner as if they tried to fit on the laptop internal screen resolution. I plug in and switch to the external monitor before unlocking my session. Is there a way to prevent this automatic resizing? Longer version: I have a laptop that I move between two locations. I have one docking station, and the same kind of monitor configured for 1600x1200, in both locations. The internal laptop screen is awful so I don't use it. Location A: Docking station, monitor connected via DVI. Location B: No docking station, external monitor connected via VGA cable. In this location I have the laptop lid open for keyboard access but I don't use the laptop screen. When moving from Location A to Location B, the laptop wakes up from sleep, displaying the screen on the internal monitor. I switch to the external monitor display (using Fn+F8 on this laptop), and only after that do I unlock my session with my password. However, Windows has crammed all my nicely arranged windows into the upper left corner as if it were trying to fit them all on the laptop internal screen resolution. When moving from Location B to Location A, I have the laptop lid closed when using the docking station so Windows apparently concludes the screen resolution is 1600x1200 and doesn't resize any windows. The laptop is a Dell Latitude running Windows 7 Professional.

  Read the article

• We are moving to two servers from one server due to performance issues. How do we monitor the value of this change?

  - by MikeN

  We are moving to two servers from one server due to performance issues. We are moving our MySQL DB to its own dedicated server and will keep the original machine as the front end machine running nginx/apache (Django backend.) How do we monitor the value of this change? It is possible our whole site could actually get slower since the MySQL queries will be going out over a secure remote connection instead of locally?

  Read the article

• Does Monitor.Wait ensure that fields are re-read?

  - by Marc Gravell

  It is generally accepted (I believe!) that a lock will force any values from fields to be reloaded (essentially acting as a memory-barrier or fence - my terminology in this area gets a bit loose, I'm afraid), with the consequence that fields that are only ever accessed inside a lock do not themselves need to be volatile. (If I'm wrong already, just say!) A good comment was raised here, questioning whether the same is true if code does a Wait() - i.e. once it has been Pulse()d, will it reload fields from memory, or could they be in a register (etc). Or more simply: does the field need to be volatile to ensure that the current value is obtained when resuming after a Wait()? Looking at reflector, Wait calls down into ObjWait, which is managed internalcall (the same as Enter). The scenario in question was: bool closing; public bool TryDequeue(out T value) { lock (queue) { // arbitrary lock-object (a private readonly ref-type) while (queue.Count == 0) { if (closing) { // <==== (2) access field here value = default(T); return false; } Monitor.Wait(queue); // <==== (1) waits here } ...blah do something with the head of the queue } } Obviously I could just make it volatile, or I could move this out so that I exit and re-enter the Monitor every time it gets pulsed, but I'm intrigued to know if either is necessary.

  Read the article

• No signal to monitor after driver install

  - by Hossam Riyad

  After installing 10.10 I used Hardware Drivers (Jockey) to install the graphics driver v11.2 for my ATI HD 5770. After restarting to activate the driver all went well and the boot screen showed up but not like the normal one the text was rough on the edges and after the boot finished the screen turned black and no signal. I have found some forum discussions about that issue but no fix worked for me. I use a DVI to VGA adapter and I have a View Sonic E70F CRT monitor. PC specs CPU: Intel Q8300 2.5/4 GPU: ATI Powercolor HD5770 1GB MB: Gigabyte EP43-UD3L RAM: 4GB 1066 Kingston

  Read the article

• Service and/or tool to monitor performance?

  - by chris

  I am seeing wildly different performance from a clients web site, and would like to set up some sort of monitoring. What I'm looking for is a service that will issue requests to a couple of URLs, and report on the time it took to process the page - TTFB and time to download the entire page - that means I need something that will process javascript & css. Are there services like this? I've seen a few that monitor uptime, but they don't seem to report on the overall page performance.

  Read the article

• Dual Monitor results in 'greyed' windows

  - by paula

  This occurs in Maverick and Natty. Single screen is fine, mirror of single screen is fine. If the mirror box is unchecked and the second monitor is turned on to extend the desktop then all windows are greyed out (like they do when a process has timed out and is unresponsive) and pop up menus are greyed out but icons, panels and background are fine and the windows do operate (just can't see them well enough to use) I have a D620 with intel graphics. This machine did work with dual monitors at some time in the past, however I have been using another machine, a D630 with nvidia and it works fine. Yes, there have been any number of updates. I also upgraded from Maverick to Natty to see if it would go away. No joy. Also, the D620 has a dual boot windows system and the windows xp system works fine with daul monitors There is a forum thread that goes into more detail and there are a number of users experiencing this problem. Thread: greyed out windows Thanks for reading paula_ke

  Read the article

• Xubuntu dual monitor broke display

  - by Arman yaraee

  After I used Settings Display to enable my second monitor, my first display is not working anymore either. So I enabled both, then clicked save configuration since it was working and boom it crashed. Now when I start up, I can see the screen which I type my password but it goes black after that! When I boot into recovery mode it works fine but in Settings Display I don't see HDMI at all to disable it. Is there anyway to restore all display setting to default? (I can Ctrl+ALT+F1 and type commands but xrandr returns no results over there) EDIT I should clarify that system bios is set to laptop display

  Read the article

• Check/Monitor Amount of SQL Queries per Hour

  - by deathlock

  My website is hosted on a shared hosting and I'd like to know how much SQL queries it is using per hour. I tried to navigate through cPanel and I find nothing to check or monitor the amount of SQL queries per hour. I tried to ask my host and they said it is not possible to do manually. However I found this http://forum.powweb.com/archive/index.php/t-49937.html and another one on Stackoverflow: http://stackoverflow.com/questions/9842094/sql-how-can-i-get-the-number-of-executed-queries-per-database-or-hour-or And since this exists, I assume that it is actually possible. Problem is I can't execute that in my phpmyAdmin. Can someone here guide me through the process?

  Read the article

• How can I monitor a website for malicious changes to the files

  - by rossmcm

  I had an occasion recently where our website was compromised - a link farm was added to a couple of the pages on one occasion, and on another occasion, a large and nasty aspx file was put on the server. I won't mention the host's name (Hostway), but I was pretty annoyed that someone was able to do this. No, it wasn't a leaky password - around 10 sites hosted by HW with consecutive IP addresses got trashed. Anyway. What I need is a utility or service (preferably free) that takes a snapshot of my websites contents, and then regularly monitors the files (size and datestamp) for unauthorized changes or additions, and alerts me. I've used web services that monitor one file for changes, but I'm looking for something a bit more aggressive.

  Read the article

• monitor multiple work repositories in ODI11g EM

  - by tina.wang

  when you create a domain, by default it will let you specify master/work repository information. This work repository is automatically configured and be directly monitored in EM But your master repository may contain multiple work repositories, how to let EM monitor all them. 1)these work repositories must have been registered in your master repository 2)in weblogic console, generate generic data source for every work repository, eg: jdbc/mySecondWork 3)in odiconsole, create new repository connection for the every work repository, master jndi information is jdbc/odiMasterRepository by default OK, now you can see the work repository status is configured. Btw, there is a bug when the work repository is execution type.

  Read the article

• Force full-screen game to one monitor?

  - by Joachim Pileborg

  I have two monitors, one 1920x1200 and the other 1920x1080, and in 10.10 they were "separate". As in when I opened the display preferences they were shown as separate screens. Since installing (from scratch) 11.04 I instead have one giant 3840x1200 screen spread over the two monitors. Not a problem per se, except when I want to play full-screen games! When playing games I want them to be on the primary (1920x1200) monitor, but since the game only detects one screen I cant do that, even if I lower the resolution in-game. I have a nVidia GTS 250 card, using nvidia-current driver (version 270.41.06), even though "Additional Drivers" reports the driver is "activated but not currently in use". Is there a way to force the game to use only one of the monitors? Or make the game detect both monitors?

  Read the article

• How can I monitor a website for malicious changes to the files

  - by user41421

  I had an occasion recently where our website was compromised - a link farm was added to a couple of the pages on one occasion, and on another occasion, a large and nasty aspx file was put on the server. I won't mention the host's name (Hostway), but I was pretty annoyed that someone was able to do this. No, it wasn't a leaky password - around 10 sites hosted by HW with consecutive IP addresses got trashed. Anyway. What I need is a utility or service (preferably free) that takes a snapshot of my websites contents, and then regularly monitors the files (size and datestamp) for unauthorized changes or additions, and alerts me. I've used web services that monitor one file for changes, but I'm looking for something a bit more aggressive.

  Read the article

• Catalyst forgets monitor settings after reboot or log out in 12.10

  - by Mate Weisz

  I have a Samsung monitor connected to my ATI Radeon graphic card via HDMI. By default the screen has a black border around, but I can disable it in the Catalyst menu to get full screen. (There is a scalebar that I have to set to the highest value.) My problem is that every time I turn off and on my computer it changes back and I have to set it up again. It is really annoying. Is there any way to make this setting permanent? Notes: 1. I open Catalyst with admin rights. 2. When I open the Catalyst settings menu, it looks like that it keeps my settings, because the scalebar stays at the highest point, but still it doesn't scale up my screen until I move back and forth the scale bar to the same point

  Read the article

< Previous Page | 33 34 35 36 37 38 39 40 41 42 43 44  | Next Page >