Search Results

Search found 5438 results on 218 pages for 'ide hdd'.

Page 37/218 | < Previous Page | 33 34 35 36 37 38 39 40 41 42 43 44  | Next Page >

• USB External HDD NOT spinning down on Windows Vista / Windows 7

  - by Deepak

  I have 3 external 2.5" USB HDDs - all from different manufacturers and with different capacities. I also have access to multiple Windows Vista / Windows 7 / Windows XP computers. My problem is that with the Windows Vista and Windows 7 computers, the external USB drives DO NOT spin down when I do "Safely remove hardware". Windows will tell me that I can safely remove the device, but I can see (and feel the rotations of the disk when I touch the casing) that the disks are still spinning and NEVER spin down. They also never go into their suspended state (which is generally signaled with a slow flashing of the activity LED). However, with Windows XP, when I do "Safely remove hardware", I can see that the drives do indeed spin down without any issues and go into their respective suspended states. I notice that this behaviour is consistent across all my 3 drives and on different hardware. Has anybody else noticed the same issues? Is there any way we can have the same behaviour as Windows XP on Windows Vista and 7, because I feel on the long run, disconnecting the drives while they are still spinning will have a negative effect on their life span. Thanks, Deepak.

  Read the article

• Prevent Ultrabay HDD from ejecting on sleep

  - by Bryce Evans

  I have a lenovo T430s thinkpad with a small SSD primary drive and 500gb ultrabay drive. When I put the computer to sleep and then return, I get the message titled "problem ejecting < drive name " "Windows can't stop your 'Generic volume' device because a program is still using it." This pop up is very annoying every time every time I use the computer. I don't want to disable write caching [D:Hardware[drive]policiesquick removal] because I want best performance and never remove the drive. Any ways to avoid this pop up?

  Read the article

• Will I be abled to access 2nd HDD from dual-boot

  - by Ruben

  I'm planning to have a dual-boot on my computer. I have 2 physical hard drives, one 500GB and one 2TB. What I want to do, is have a dual-boot setup (2 partitions, both 50 GB) for Windows 8 and Windows 7. But will I be able to access the 3rd partition on the disk, or the other disk from both OSs? In this case, it would be really useful to access files and install programs, because I could use them on both OSs, as long as I have the same registry keys.

  Read the article

• How reliable is HDD SMART data?

  - by andahlst

  Based on SMART data, you can judge the health of a disk, at least that is the idea. If I, for instance, run sudo smartctl -H /dev/sda on my ArchLinux laptop, it says that the hard drive passed the self tests and that it should be "healthy" based on this. My question is how reliable this information is, or more specifically: If according to the SMART data this disk is healthy, what are the odds of the disk suddenly failing despite this? This assumes the failure is not due to some catastrophic event that impossibly could have been predicted, such as the laptop falling down on the floor causing the drive heads to hit the disk. If the SMART data does not say the disk is in good shape, what are the odds of the disk failing within some amount of time? Is it possible that there will be false positives and how common are these? Of course, I keep backups no matter what. I am mostly curious.

  Read the article

• Safe BIOS upgrade run from external USB-HDD and not native OS

  - by ecoologic

  I have a Toshiba M200 laptop which came with Windows Vista. After buying it, I replaced the OS with XP and recently I swapped the internal hard disk with a bigger one where I only have Ubuntu. So now I can boot XP from the external USB hard disk. There's a BIOS update available (2.3 against my 1.8) which I'd like to install and there's also a version for XP. Is it "reasonably" safe to install this upgrade for Windows XP (despite the original OS was Vista, the laptop model is the right one) from my external USB hard disk with Win XP?

  Read the article

• Disadvantages of enabling AHCI after Win7 install

  - by Mario De Schaepmeester

  I've formatted my notebook that has a 5400RPM HDD with ~500GB capacity. After installing Windows 7 and about half the drivers (including chipset) I began to doubt whether to go for IDE or AHCI mode for my hard drive. There used to be a lot of discussion on the internet which is better and so far I understood it was particularly helpful on SSDs. Now the general consensus seems to be that AHCI mode is best for most hard drives. I have thus enabled AHCI in the middle of configuring my notebook (rest of the drivers, necessary software etc...) Two questions: considering my HDD's spec above, should I leave it on? Is there any disadvantage of enabling it after Windows 7 and chipset drivers installation? Windows 7 version is 64 bit Home Premium.

  Read the article

• using GNU Parted to display complete HDD data

  - by bhumika

  how do i use parted command to show free space in my hard disk? cfdisk shows free space while "parted -l" doesnt show any free and unallocated space.

  Read the article

• Which file system to choose from when formatting 1.5TB hard drive (hdd)

  - by MaxiWheat

  I plan to buy a 1.5TB hard drive soon. I would like to know which file system to choose from when I'm gonna format it. With FAT32, there is a limitation concerning the maximum file size (4GB) that bugs me since I might save large files such as DVD images which are over 4GB. On the other hand, NTFS allows me to save larger files, but seems less compatible with other OS than Windows and is also proprietary to Microsoft. Are there other alternatives ? Can you give me your advices ?

  Read the article

• RAID1: Migrate HDD to SSD?

  - by OMG Ponies

  My current workstation uses an Adaptec 5805, with Win2008 mirrored between two 72 GB (10K?) savvio drives. My question is if there's a way to migrate the mirror to use SSDs - I've been looking at 90GB Corsair Force (Sandy Bridge) to replace the existing setup. If it's possible, without installing the OS fresh. If I replaced the mirrored drive with an SSD, would the array sync the drives? Then I could promote the SSD mirror to be the primary, and use the second SSD as the mirror. That'd be too easy... Or should use Ghost to get an image of the existing setup, apply it to the SSD for a new mirror to be setup on?

  Read the article

• Dell PowerEdge 6850 Degraded HDD

  - by Matt

  Good Morning, We have a dell power edge 6850 with a degraded drive in the RAID array. I have never had to recover such an issue, so any help or advice would be welcome. Basically it hasn't affected the server at an operating system level, but has slowed down performance, I have a replacement drive in hand but as this is our main database server I want to proceed with extreme caution. My options as I see them are - Can I just hot swap the degraded drive with the new one and the data will automatically re-sync and we are all back to normal presumably this is dependant on the current raid configuration? reading various comments on-line I may need to re-configure the RAID array and re-build the broken drive? This screams disaster to me with the main worry being that I wipe any other data. Option 1 would of course make my day. Thanks in advance

  Read the article

• Western Digital HDD disappears and reappears in BIOS

  - by tbkn23

  I know many people asked about similar problems, but I have a very specific case where I can't understand what's going on... I have a 3TB Western Digital Caviar Green disk connected in my Desktop, that also has a seagate 1.5TB disk and 2 SSD drives (OCZ and Sandisk). After working fine for quite some time (probably more than a year), suddenly my Caviar Green drive disappeared from windows. I checked the BIOS, and it wasn't there either. I opened my PC, played with the connectors, power, etc, but nothing helped. Even tried switching connectors with those of the 1.5TB disk, and nothing changed, the 1.5TB seagate was there, but the 3TB WD was not. Ok, now for the strange part. I have another desktop at home, so I took out my 3TB drive, connected it there, and it worked fine! I copied the most important files out of it, and then made another attempt in the original desktop. Surprise! It now appeared in the BIOS and worked fine! I even ran the SMART test with the WD tools and it said everything was intact. It doesn't end here. After leaving it overnight in the original desktop, it disappeared again in the morning. I repeated the entire process, connecting it to the second desktop, and there it is again working fine. Now for my question... Whats going on? The disk seems to be appearing on/off in my original Desktop, while other drives there work fine. SMART test says the disk is fine. Any ideas? Is the disk defective and should be replaced? Or maybe there's a problem with the controller in the desktop? I'm using a Gigabyte GA-880GA-UD3H motherboard and tried connecting the drive to both bridges (SATA2 and SATA3 bridges). Thanks EDIT: Power options are set never to turn off hard drives:

  Read the article

• Booting ubuntu from usb hdd: GRUB menu not shown

  - by emanemos

  Hello, could anyone help me to boot ubuntu-9.04 from usb hard disk? This disk contains /boot primary partition. During ubuntu installation I used "Advanced" button and asked to install GRUB to the /boot partition. Later I checked whether GRUB files are really present in this partition. They are. However, I get stuck while trying to boot. The boot menu ("ubuntu generic version", "ubuntu recovery mode", etc...) is not shown. Instead I am thrown to GRUB minimal bash-like version. I feel at a loss and have no idea why I am pointed to this minimal version. Can anybody prompt me what to do?

  Read the article

• When HDD wakes up?

  - by NumberFour

  Im looking for some small script or application which could log the time when a non-system disk wakes up. I cannot identify which application or script wakes up my non-system drive (which has to be asleep until I work with it). I have already set the noatime flag, tried to use powertop and iotop to determine which application could prevent it from going to sleep - but with no result. So my plan is to set this drive asleep (hdparm -Y) and see at what time it gets regularly woken up. Thanks for any advice.

  Read the article

• Last step in HDD Recovery (fixing windows)

  - by Atom Computing

  My dad’s hard drive corrupted which was a result of many bad sectors. Anyway, I made a clone of the drive and have now repaired it totally (recreating the MBR and MFT) and doing a series of ChkDsk's on it. I can now see all the files and folder on it and it is all intact. I currently have it as a slave in my computer (where I was doing all the repairs). When putting it back into the computer, it comes up with "A disk read error occurred: Press Ctrl + Alt + Del to Restart". I don’t know why this is happening but think it might have something to do with file permissions. I have tried a start-up recovery on the Vista boot CD and it found no problems. When trying to apply file permissions (and creating file perms for the SYSTEM group (as it didn’t have any for SYSTEM group)) it couldn't apply them for some of the System32 folder files. I have tried applying them as admin and with as powerful privileges I can get. All to no avail. When it is in my PC I can boot it up (I added it into my bootloader) and it boots up fine except when it logs in it comes up with the error - "Rundll32.exe - Windows cannot access the specified device, path or file. You may not have the appropriate permissions to access the item" This message keeps coming back and nothing loads at all. Any help would be greatly received as I have got so far with the data recovery and want to avoid a reformat at all costs due to the vast number of programs installed and I don’t have much time on my hands! Thanks

  Read the article

• Occasional HDD Related Hangs

  - by diolemo

  I have an issue that seems to be disk related. Occasionally my system will block for 30 or so seconds and is mostly unresponsive. Those things already in memory requiring no disk access continue to function but those things requiring disk access (even small) hang. 30 seconds later everything is back to normal. I have 2 Samsung drives in RAID 0. I have 1 WD drive (has pagefile) I have an SSD used for caching (Intel Smart Response). This is a new install of Windows and the drives were fine in my old PC (~1 month ago). Has anyone experienced anything similar? Any suggestions to solve this one? Thanks in advance.

  Read the article

• Mounting Windows HDD from an OpenSolaris LiveCD

  - by yulkes

  Hey, I´m running openSolaris LiveCD on a computer that runs Windows XP. How can I mount the 2 partitions I have in Windows, and be able to access them from the Solaris? Thanks

  Read the article

• HDD dead forever???

  - by Roberto

  Yesterday I turned on my computer and it couldn't boot. I found out the hd (320GB SATA Seagate Momentus 7200.3 for notebook) was broken, it couldn't be recognized by the BIOS. I have another of the same hd, so I exchanged the boards. I found out that there is a problem on its board since my good hd didn't work. But the broken hd doesn't work with the good board as well: it can be recognized but when I insert a Windows Instalation DVD it says the hd is 0GB. I put it in a case and use it in another computer via USB, and but it doesn't show up in the "My Computer". I used a software to recover files called "GetDataBack for NTFS", it recognized the hd but with the wrong size (2TB). I try to make it read the hd but it get an I/O error reading sector. It tries to read, the hd spins... So, since I'm using a good board on it, the problem seems to be internal. Is there anything someone could do recover the files from it?

  Read the article

• Copying large file from SD to HDD via USB failing on Ubuntu

  - by Kent Boogaart

  Hi, I'm attempting to copy some large files from my camera (Canon EOS 500D) to my laptop, which is running 64 bit Ubuntu 9.04. I am using USB to connect the two devices. For most files, it is simply a matter of control-C and control-V. I have done this successfully many times with both photos and small movies (eg. 180MB). However, when I attempt to do this with very large files (eg. 3GB), the copy seems to start with a lot of activity both on the camera and laptop, but after 10 minutes or so the camera is automatically unmounted and the copy fails to complete. I have read that this might be due to the device not mounting as a mass storage device, but I cannot see any obvious way for me to change this behavior. Can anyone offer any direction here? I'll get a USB card reader if necessary, but I'd prefer to be able to just plug my camera in. Thanks

  Read the article

• Windows 7 spins up HDD when files should be on SSD

  - by ZorroDeLaArena

  I run 64-bit Windows 7 Ultimate off a Corsair 12GB SSD (cmfssd-128gbg2d) and I've got two older HDDs I use for storing media. However even though the operating system and all the programs are installed on the SSD, frequently when I'm starting programs, I can hear the computer spin up one of the HDDs before the app starts and I'm not sure why (and I don't know which drive it is). For programs that should open very quickly - Programmer's Notepad, Calculator (the basic one that comes with Windows), etc. - having to wait several seconds sometimes can be pretty obnoxious. Avoiding wait times like that are why I got the SSD in the first place. Is there any way to tell why that's happening? I'm happy to provide more information but I'm not sure what's important. Any help would be really appreciated!

  Read the article

• Cloned Windows 7 to new HDD and want to change the drive letter to C

  - by Hoppe

  I used Clonezilla to clone my existing hard drive to a new one I bought. I then changed the BIOS to set the new drive as the first in the boot sequence. I'm pretty sure that I'm still running Windows 7 on the old drive. My old drive is marked as C. Now that I don't have a disk drive any more, how I do I swap the drive letter from J: to C:? I tried to change it in the disk management section of "Manage", but it reports: "the parameter is incorrect".

  Read the article

• Move 2TB Win7x64 to 640GB HDD

  - by reedacus25

  Basically I just got a new (refurbished) HP H8-1260t to use for Windows Media Center. The shipping drive is a 2TB Hitachi drive, but I have an older and barely used 640GB WD Caviar Blue 7200RPM drive I would like to move my Windows install to. I have about 750GB of data with over 1TB free left on the drive. Having googled my heart and fingers out, I would think that I can shrink my partition down to the size it is full at now with over 1TB free for a second partition where I can move my media files to further shrink my boot partition so that I can fit a system image smaller than 640GB on that WD drive. I want to have a separate drive for Media and TV Recordings from my boot disk. Does this sound like the easiest method for me? Or am I doing this all wrong. Help appreciated.

  Read the article

• Lenovo Thinkpad T430 not booting from HDD if there is a USB modem connected

  - by user93353

  I have a T430 Levono Thinkpad running Win7. I use a ZTE USB modem (something like this) for my internet connection. I usually keep the modem plugged into the USB drive even when the laptop is shutdown or hibernating. This worked fine on my earlier laptops. But with the Lenovo, my laptop doesn't boot if the modem is in the USB drive. It shows the initial character based screen where it gives the Thinkpad message & BIOS details and then waits. If I pull out the modem, it goes ahead. I have disabled USB as a boot option in my BIOS settings, but even then this happens sometimes (but not all the times). Likewise while resuming from hibernation. The USB modem also has drivers & ISP connection client which getting installed the first time you use it on any machine. I have used multiple laptops (HP, DELL, Acer, Gateway) but never faced this problem before. I have friends who use other Thinkpad models but haven't faced this issue. Any resolutions, workarounds for this?

  Read the article

• Access HDD on Toshiba Portege 3440CT

  - by PeterMmm

  Someone knows or has the user's manual to tell how to access the harddrive on a Toshiba Portege 3440CT to change the drive ?

  Read the article

• Raspberry Pi how to format HDD

  - by Speed

  Hi I am very new to Raspberry Pi environment, so looking for a bit of help to format a usb hard disk drive. I ran lsblk and got sda 8:0 0 37.3G 0 disk sda1 8:1 0 37.3G 0 part looking on web, if tried the following "sudo mkfs.ext4 /dev/sda1 -L USB40gb" it did something but when I tried to mount the drive again, it still showed the files that were there before and I can not create new file/folder "Error creating directory: Permission denied" I am writing this from my windows 8.1 pc so can not cut and paste from the pi. trying to format its output is a bit hard. Oh, there is Nothing written after the word "part" above. There use to be /media/USB40gb so I have done something because this has disappeared. I am using PCManFM 0.9.10 It does not have a format option, which would make life a lot easier, but then its not windows. I think I am running the basic linux os for the pi. It boots to a graphic environment, but I do not know how to advise what it is. I think its OpenBox 2.0.4 Thanks in advance Speed PS: I reran the format string above but this time I changed the label to read USB37gb. I did this to confirm that I was in fact formatting the right drive. Low and behold, it actually formatted the drive, wiping everything from it. Great ... testing it by creating a new folder on the drive and get error msg Permission Denied! So I have fixed the formatting issue by trial and error but still can't use the drive... Suggestions anyone?

  Read the article

• Can a USB/IDE/SATA adapter be flaky?

  - by Ward

  I use USB/IDE/SATA converters a lot and on the two that I have now, I sometimes get errors copying files to drives. It only happens when I'm copying big files to the drive (big can mean as little as 100MB, I think it happens more often with bigger files - 300MB or more), and basically the copy will fail and I'll get one or more error messages about "Delayed write failed." But if I disconnect the drive and re-connect it, I'll usually be able to continue. (The file that was being copied will be corrupt, but otherwise the drive is fine.) I just noticed a new type of flakiness: the data transfer rate can vary widely. I copied one set of files (5x300MB files) and it took 10+minutes, then I copied another set (approx. the same sizes) and it took less than a minute. I haven't done systematic testing, the other things I'm doing on my laptop at the same time might have some impact, and I haven't cross-checked the two adapters I have and the 3 hard drives I'm working with to see if there's a pattern. I'm more wondering if anyone else has seen anything like this.

  Read the article

< Previous Page | 33 34 35 36 37 38 39 40 41 42 43 44  | Next Page >