Search Results

Search found 4345 results on 174 pages for 'partition'.

Page 37/174 | < Previous Page | 33 34 35 36 37 38 39 40 41 42 43 44  | Next Page >

  • Linux SW Raid: whole disk or per-partition?

    - by Steve Pomeroy
    I have inherited a machine which has 2 physical disks and uses Linux SW RAID(1). Both disks are partitioned and are are all individual arrays (/dev/md0, /dev/md6, etc.). Those arrays are then mounted (/boot, /home, etc. even /tmp). As RAID is designed to mitigate physical failures, is there any reason why one would use this technique over whole-disk arrays that are then partitioned (perhaps using LVM)? This seems prone to more potential issues, but may have some special properties that I haven't been able to glean. I'm planning on moving this setup to: disks?SWRAID(1)?LVM as I'll be making multiple VMs out of the one machine, but wanted to make sure I knew what I was doing when I got rid of the old setup.

    Read the article

  • Damaged XenServer Storage LVM partition table

    - by Fiolek
    I have a homeserver running under XenServer control with 3x1TB discs inside, one for XenServer and two mirrored(using Intel's fakeRAID and dmraid) for VMs and a user data(but now I think RAID didn't work). I tried to pass PCI card to VM using PCI-passthroug and I read somewhere that I need to recompile kernel with pciback module but something went wrong(I made mistake in /boot/extlinux.conf and server couldn't run) and I had to use LiveCD of GPartEd(I already had it on USB key) to correct this. But when I re-run the server all VDIs were gone. I have completly no idea what could go wrong. I tried to repair RAID using dmraid -R in the hope that everything will return to noramal but now I think this done more bad than good(and corrupted rest of LVM table...). Is there any possibility to recover this SR or only data from one(~100GB) of VDI? I also wants to apologise for my English, I'm not from English-speaking country and I'm only 16 years old, so I hadn't "time" to learn it(school isn't good place to do this) in sufficient way.

    Read the article

  • Prevent gnome from automatically mounting partition when clicked in nautilus

    - by bjarkef
    Hi, I have two partitions on a hard drive in my machine that are formatted as ntfs, but must under no circumstance be mounted by my Ubuntu installation (unless I do some preparation first). However nautilus happily displays the partitions, and a single click will mount them automatically. This is very dangerous behaviour, how can I hide the partitions from nautilus and prevent accidentally mounting them by a single stray mouse click? Thanks

    Read the article

  • How would I add a second physical hard drive to proxmox

    - by Cygnus X
    I installed proxmox on a single 250GB hard drive and I would like to add a second identical hard drive to put more VM's on. I already tried once, and didn't get very far. I added it and formatted it as an ext4, but when I went to use the disk, it said only 8GB was available. That's not quite right. So I did some searching and found that I had to make the device ID 8e for a linux lvm. After I did this, it said I had to restart, so I did... and it wouldn't boot!!! What did I do wrong? And how do I do it right? (I know I could throw in a RAID card and do a RAID 0, but I'd rather not).

    Read the article

  • fdisk -l shows a partition is not in /dev directory

    - by zitronic
    I am having troubles on mounting my ntfs hard drive on linux. I am running ophcrack live CD. fdisk shows me the hard drive I have installed on my computer fdisk -l Disk /dev/hdc: 30.0 GB, 30005821440 bytes 255 heads, 63 sectors/track, 3648 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/hdc1 * 1 3647 29294496 7 HPFS/NTFS but I dont have that device on my /dev directory so I can not mount it ls /dev/hd* /dev/hda /dev/hda4 /dev/hda8 /dev/hdb2 /dev/hdb6 /dev/hdc /dev/hda1 /dev/hda5 /dev/hda9 /dev/hdb3 /dev/hdb7 /dev/hdd /dev/hda2 /dev/hda6 /dev/hdb /dev/hdb4 /dev/hdb8 /dev/hda3 /dev/hda7 /dev/hdb1 /dev/hdb5 /dev/hdb9 What could be going on_

    Read the article

  • Partitions on Linux and their CHS dependance

    - by FractalizeR
    Hello. Recently I came into a problem with partitioning WD20EARS disk (with 4k sectors). I needed partitions to be aligned correctly so I just used parted in "unit s" mode and started all partitions at mod8 sector (drive itself reports, that sector is 512b) and ended all of them at mod8-1 sector. But then I thought, that may be I should take into account also the cylinder boundaries (I've seen some posts on the net where fdisk complains about partitions not to start/end on cylinder boundary). And then... I thought, that if drive lies about it's sector size, may be it's lying about the whole geometry? Should I care about partitions to be aligned against cylinder boundaries? If so, how do I find these boundaries? I guess each drive model can contain different sectors per track/cylinder... Or sector alignment is all I should take care of?

    Read the article

  • Flexible virtualization infrastructure Design with libvirt

    - by Lessfoe
    I'm going to install a CentOS6 Server with Virtualization ( libvirtd ) capabilities on a DELL Server with Hardware RAID5 of around 6T of disk space ( It has 4x2T disks in a PERC700 RAID Controller ). I'm going then to install some guests which requires few resources except one that needs 500GB of disk space, 8/16GB of RAM and good performances. I was thinking about file images for guests storage but I'm not sure about the 500GB VM what needs good performances so that an LVM device could be better. So my question is what would be the best layout concerning: RAID setup ( RAID5, RAID1 + 1 disk for OS only. ) disk partitioning ( using the entire disk/ leave free space for future use and extending it with LVM ) guests storage management ( LVM devices or file images ( considering the 500GB VM that is performance demanding ) or mixed ) Where to put guests storage? /var/lib/libvirt/images or maybe in a custom dir separated from system /home/VMs Thanks in advance for any hint.

    Read the article

  • Norton Ghost usage, Linux? ISO? Server? MBR?

    - by overtherainbow
    Before evaluating Symantec/Norton Ghost to image partitions, I have a couple of questions about using this tool: In the product page, it only mentions Windows: Can Norton image Linux partitions as well? Can I burn an ISO to create/recover images? The ISO's I found seem only able to restore an image but not create one. Does it mean that images can only be created from within a running Windows? For Windows partitions: Does it support both regular and Server versions? Acronis doesn't image Server partitions in the regular version When restoring an image, does Norton give the option of including/excluding the MBR? Thank you.

    Read the article

  • cannot mount remote partition using fstab/fuse

    - by HorusKol
    Using a combination of http://ubuntu-tutorials.com/2007/01/02/mount-remote-directories-securely-with-ssh-ubuntu-6061-610/ and http://www.tuxfiles.org/linuxhelp/fstab.html I figured I could mount the root of another computer to somewhere on my new laptop to make it easier to transfer files and stuff. Now, I can connect through SSH and browser the files through an ad-hoc mount - but I would like to be able to do this automatically, and so had a look at fstab. my new entry in fstab is: remote_comp:/ /var/remote_comp fuse defaults 0 0 but testing with mount -a results in the following error: /bin/sh: remote_comp:/: not found I thought the problem was because I was trying to mount the root of the other computer, but even trying sub-directories result in the same error message.

    Read the article

  • CentOS Insufficient space in download directory /var/cache/yum/base/packages

    - by Joao Heleno
    Hello! I was trying to yum install libpcap when I got Error Downloading Packages: 14:libpcap-0.9.4-15.el5.i386: Insufficient space in download directory /var/cache/yum/base/packages * free 0 * needed 108 k Here's output from df -h: Filesystem Size Used Avail Use% Mounted on /dev/sda1 20G 19G 0 100% / /dev/sda3 202G 38G 154G 20% /home tmpfs 1.5G 0 1.5G 0% /dev/shm And fdisk -l: Disk /dev/sda: 250.0 GB, 250000000000 bytes 255 heads, 63 sectors/track, 30394 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/sda1 * 1 2611 20972826 83 Linux /dev/sda2 2612 3251 5140800 82 Linux swap / Solaris /dev/sda3 3252 30394 218026147+ 83 Linux I have launched yum clean all with no success clearing up space. Please advise. Thanks.

    Read the article

  • Possible to use LVM partitions inside a vmbuilder created KVM virtual machine?

    - by Tauren
    I have an Ubuntu 9.10 host system with LVM partitions running KVM. I've been creating VMs using vmbuilder using LVM partitions for each VM instead of files for the VMs. When I configure a VM using vmbuilder --part, the partitions in the file I'm using are created as regular partitions (sda1, sda2, etc.). What I'd like to do is use LVM inside of the VM in case I need to resize the partitions at some point. But I don't see any options for doing that using the vmbuilder tool. It seems like this might be a common request to avoid using kpartx, etc. Is there something I'm missing, or is this just not possible with vmbuilder?

    Read the article

  • Cross-platform, human-readable, du on root partition that truly ignores other filesystems

    - by nice_line
    I hate this so much: Linux builtsowell 2.6.18-274.7.1.el5 #1 SMP Mon Oct 17 11:57:14 EDT 2011 x86_64 x86_64 x86_64 GNU/Linux df -kh Filesystem Size Used Avail Use% Mounted on /dev/mapper/mpath0p2 8.8G 8.7G 90M 99% / /dev/mapper/mpath0p6 2.0G 37M 1.9G 2% /tmp /dev/mapper/mpath0p3 5.9G 670M 4.9G 12% /var /dev/mapper/mpath0p1 494M 86M 384M 19% /boot /dev/mapper/mpath0p7 7.3G 187M 6.7G 3% /home tmpfs 48G 6.2G 42G 14% /dev/shm /dev/mapper/o10g.bin 25G 7.4G 17G 32% /app/SIP/logs /dev/mapper/o11g.bin 25G 11G 14G 43% /o11g tmpfs 4.0K 0 4.0K 0% /dev/vx lunmonster1q:/vol/oradb_backup/epmxs1q1 686G 507G 180G 74% /rpmqa/backup lunmonster1q:/vol/oradb_redo/bisxs1q1 4.0G 1.6G 2.5G 38% /bisxs1q/rdoctl1 lunmonster1q:/vol/oradb_backup/bisxs1q1 686G 507G 180G 74% /bisxs1q/backup lunmonster1q:/vol/oradb_exp/bisxs1q1 2.0T 1.1T 984G 52% /bisxs1q/exp lunmonster2q:/vol/oradb_home/bisxs1q1 10G 174M 9.9G 2% /bisxs1q/home lunmonster2q:/vol/oradb_data/bisxs1q1 52G 5.2G 47G 10% /bisxs1q/oradata lunmonster1q:/vol/oradb_redo/bisxs1q2 4.0G 1.6G 2.5G 38% /bisxs1q/rdoctl2 ip-address1:/vol/oradb_home/cspxs1q1 10G 184M 9.9G 2% /cspxs1q/home ip-address2:/vol/oradb_backup/cspxs1q1 674G 314G 360G 47% /cspxs1q/backup ip-address2:/vol/oradb_redo/cspxs1q1 4.0G 1.5G 2.6G 37% /cspxs1q/rdoctl1 ip-address2:/vol/oradb_exp/cspxs1q1 4.1T 1.5T 2.6T 37% /cspxs1q/exp ip-address2:/vol/oradb_redo/cspxs1q2 4.0G 1.5G 2.6G 37% /cspxs1q/rdoctl2 ip-address1:/vol/oradb_data/cspxs1q1 160G 23G 138G 15% /cspxs1q/oradata lunmonster1q:/vol/oradb_exp/epmxs1q1 2.0T 1.1T 984G 52% /epmxs1q/exp lunmonster2q:/vol/oradb_home/epmxs1q1 10G 80M 10G 1% /epmxs1q/home lunmonster2q:/vol/oradb_data/epmxs1q1 330G 249G 82G 76% /epmxs1q/oradata lunmonster1q:/vol/oradb_redo/epmxs1q2 5.0G 609M 4.5G 12% /epmxs1q/rdoctl2 lunmonster1q:/vol/oradb_redo/epmxs1q1 5.0G 609M 4.5G 12% /epmxs1q/rdoctl1 /dev/vx/dsk/slaxs1q/slaxs1q-vol1 183G 17G 157G 10% /slaxs1q/backup /dev/vx/dsk/slaxs1q/slaxs1q-vol4 173G 58G 106G 36% /slaxs1q/oradata /dev/vx/dsk/slaxs1q/slaxs1q-vol5 75G 952M 71G 2% /slaxs1q/exp /dev/vx/dsk/slaxs1q/slaxs1q-vol2 9.8G 381M 8.9G 5% /slaxs1q/home /dev/vx/dsk/slaxs1q/slaxs1q-vol6 4.0G 1.6G 2.2G 42% /slaxs1q/rdoctl1 /dev/vx/dsk/slaxs1q/slaxs1q-vol3 4.0G 1.6G 2.2G 42% /slaxs1q/rdoctl2 /dev/mapper/appoem 30G 1.3G 27G 5% /app/em Yet, I equally, if not quite a bit more, also hate this: SunOS solarious 5.10 Generic_147440-19 sun4u sparc SUNW,SPARC-Enterprise Filesystem size used avail capacity Mounted on kiddie001Q_rpool/ROOT/s10s_u8wos_08a 8G 7.7G 1.3G 96% / /devices 0K 0K 0K 0% /devices ctfs 0K 0K 0K 0% /system/contract proc 0K 0K 0K 0% /proc mnttab 0K 0K 0K 0% /etc/mnttab swap 15G 1.8M 15G 1% /etc/svc/volatile objfs 0K 0K 0K 0% /system/object sharefs 0K 0K 0K 0% /etc/dfs/sharetab fd 0K 0K 0K 0% /dev/fd kiddie001Q_rpool/ROOT/s10s_u8wos_08a/var 31G 8.3G 6.6G 56% /var swap 512M 4.6M 507M 1% /tmp swap 15G 88K 15G 1% /var/run swap 15G 0K 15G 0% /dev/vx/dmp swap 15G 0K 15G 0% /dev/vx/rdmp /dev/dsk/c3t4d4s0 3 20G 279G 41G 88% /fs_storage /dev/vx/dsk/oracle/ora10g-vol1 292G 214G 73G 75% /o10g /dev/vx/dsk/oec/oec-vol1 64G 33G 31G 52% /oec/runway /dev/vx/dsk/oracle/ora9i-vol1 64G 33G 31G 59% /o9i /dev/vx/dsk/home 23G 18G 4.7G 80% /export/home /dev/vx/dsk/dbwork/dbwork-vol1 292G 214G 73G 92% /db03/wk01 /dev/vx/dsk/oradg/ebusredovol 2.0G 475M 1.5G 24% /u21 /dev/vx/dsk/oradg/ebusbckupvol 200G 32G 166G 17% /u31 /dev/vx/dsk/oradg/ebuscrtlvol 2.0G 475M 1.5G 24% /u20 kiddie001Q_rpool 31G 97K 6.6G 1% /kiddie001Q_rpool monsterfiler002q:/vol/ebiz_patches_nfs/NSA0304 203G 173G 29G 86% /oracle/patches /dev/odm 0K 0K 0K 0% /dev/odm The people with the authority don't rotate logs or delete packages after install in my environment. Standards, remediation, cohesion...all fancy foreign words to me. ============== How am I supposed to deal with / filesystem full issues across multiple platforms that have a devastating number of mounts? On Red Hat el5, du -x apparently avoids traversal into other filesystems. While this may be so, it does not appear to do anything if run from the / directory. On Solaris 10, the equivalent flag is du -d, which apparently packs no surprises, allowing Sun to uphold its legacy of inconvenience effortlessly. (I'm hoping I've just been doing it wrong.) I offer up for sacrifice my Frankenstein's monster. Tell me how ugly it is. Tell me I should download forbidden 3rd party software. Tell me I should perform unauthorized coreutils updates, piecemeal, across 2000 systems, with no single sign-on, no authorized keys, and no network update capability. Then, please help me make this bastard better: pwd / du * | egrep -v "$(echo $(df | awk '{print $1 "\n" $5 "\n" $6}' | \ cut -d\/ -f2-5 | egrep -v "[0-9]|^$|Filesystem|Use|Available|Mounted|blocks|vol|swap")| \ sed 's/ /\|/g')" | egrep -v "proc|sys|media|selinux|dev|platform|system|tmp|tmpfs|mnt|kernel" | \ cut -d\/ -f1-2 | sort -k2 -k1,1nr | uniq -f1 | sort -k1,1n | cut -f2 | xargs du -shx | \ egrep "G|[5-9][0-9]M|[1-9][0-9][0-9]M" My biggest failure and regret is that it still requires a single character edit for Solaris: pwd / du * | egrep -v "$(echo $(df | awk '{print $1 "\n" $5 "\n" $6}' | \ cut -d\/ -f2-5 | egrep -v "[0-9]|^$|Filesystem|Use|Available|Mounted|blocks|vol|swap")| \ sed 's/ /\|/g')" | egrep -v "proc|sys|media|selinux|dev|platform|system|tmp|tmpfs|mnt|kernel" | \ cut -d\/ -f1-2 | sort -k2 -k1,1nr | uniq -f1 | sort -k1,1n | cut -f2 | xargs du -shd | \ egrep "G|[5-9][0-9]M|[1-9][0-9][0-9]M" This will exclude all non / filesystems in a du search from the / directory by basically munging an egrepped df from a second pipe-delimited egrep regex subshell exclusion that is naturally further excluded upon by a third egrep in what I would like to refer to as "the whale." The munge-fest frantically escalates into some xargs du recycling where -x/-d is actually useful, and a final, gratuitous egrep spits out a list of directories that almost feels like an accomplishment: Linux: 54M etc/gconf 61M opt/quest 77M opt 118M usr/ ##===\ 149M etc 154M root 303M lib/modules 313M usr/java ##====\ 331M lib 357M usr/lib64 ##=====\ 433M usr/lib ##========\ 1.1G usr/share ##=======\ 3.2G usr/local ##========\ 5.4G usr ##<=============Ascending order to parent 94M app/SIP ##<==\ 94M app ##<=======Were reported as 7gb and then corrected by second du with -x. Solaris: 63M etc 490M bb 570M root/cores.ric.20100415 1.7G oec/archive 1.1G root/packages 2.2G root 1.7G oec Guess what? It's really slow. Edit: Are there any bash one-liner heroes out there than can turn my bloated abomination into divine intervention, or at least something resembling gingerly copypasta?

    Read the article

  • Repartition Ubuntu by command line?

    - by DisgruntledGoat
    On my server the filesystem includes these partitions: Filesystem Size Used Avail Use% Mounted on /dev/sda6 4.6G 929M 3.5G 21% / /dev/sda5 76M 20M 53M 27% /boot /dev/sda8 449G 199M 426G 1% /home /dev/sda7 4.6G 4.4G 0 100% /var (Output from df -ah) I'm storing the web sites and databases under /var and as you can see it's got full. The /home folder just has basic user directories and nothing else so I'd like to repartition the server so that /dev/sda8 is about 5GB, with the rest going to dev/sda7. What's the easiest way to do this via command line (i.e. SSH)?

    Read the article

  • problem in exporting a partition on a usb stick as nfs volume

    - by Bond
    I have a USB disk which has 2 partitions.I exported one of them (on NFS) and now I am trying to mount it at client machine. Each time it gets error mount -t nfs 192.168.1.19:/media/vol2 /mnt/nfs/ mount.nfs: access denied by server while mounting 192.168.1.19:/media/vol2 Here is the /etc/exports file entry showmount -e on nfs server gives Export list for bond: /media/vol2 */24 On the client machine nfs-client package is installed. What more I need to check? Is it logged some where?

    Read the article

  • How to execute programs on mounted partition

    - by DevNoob
    This is the aplication I want to run. -rwxr-xr-x 1 manuel manuel 582841 Nov 22 09:51 PromServerMain This is the fstab entry /dev/sda8 /media/data0 ext4 defaults,user 0 2 This is the mountpoint lrwxrwxrwx 1 manuel manuel 5 Nov 16 14:23 data -> data0 drwxrwxr-x 9 manuel manuel 4096 Nov 22 09:26 data0 This is what I get manuel@P5KC /media/data/Projekte/PromServer/src $ ./PromServerMain bash: ./PromServerMain: Keine Berechtigung manuel@P5KC /media/data/Projekte/PromServer/src $ sudo ./PromServerMain sudo: unable to execute ./PromServerMain: Permission denied Even as root. I have no clue whats wrong. Any suggestions? System is Debian Wheezy Xfce.

    Read the article

  • Windows 7 Not Booting After Moving Partition

    - by Guillermo Phillips
    I have a Sony Vaio laptop. After using GParted to move the primary Windows partion, the laptop no longer boots, saying 'Operating system not found'. I don't have a recovery disc and the only other machine I have access to is a Mac Mini. I have tried creating a bootable USB using the recovery ISO from Microsoft. I can see all the files on the USB stick from my Mac. I followed the instructions here: http://borgstrom.ca/2010/10/14/os-x-bootable-usb.html I have set the laptop BIOS boot order to be 'External' first, but the laptop refuses to boot from the USB stick. I have previously been able to boot from a linux installation on the USB stick. Any help or ideas would be appreciated.

    Read the article

  • Gparted: Copy Greyed Out

    - by David
    I booted my system to a gparted linux live CD and I have two partitions: /dev/sda1 /dev/sda2 I want to move both of them to my new physical hard drive (called /dev/sdb). When I right click on /dev/sda1, I can choose copy and then paste it onto /dev/sdb. When I right click on /dev/sda2, copy is greyed out and there is a yellow exclamation point to the left of the disk. I know that the disk works since I can boot my computer from it. Why won't gparted let me copy /dev/sda2 to my new hard disk? Since the option is greyed out, I don't even get an error message. Thanks!

    Read the article

  • Adding unallocated partition to Ubuntu in VMware

    - by AMS949
    I've installed Ubuntu 9.10 on a Windows XP using vmware. As most do, I initially setup the size of the virtual drive to 8GB and soon realized I need more. I used the VMware utility to expand the virtual drive and added another 4GB, which I can see using GParted. Now my dilemma is how can I "merge" the newly created space to my original? I need to add the unallocated space. I tried before and after formatting the new space but still whenever I try to resize/move /dev/sda1 it looks like it is using its maximum capacity. Also, GParted is being used from the GParted live CD not from the Linux live CD.

    Read the article

  • mount fstab partition with public access

    - by Mikhail
    How do I specify that an fstab mount-point should be public? I want /mnt/windows to be accessible to normal users. I believe I am using ntfs-3g. If I set the /mnt/windows to 777 will it be publicly accessible without changing the permissions on the NTFS disk? /dev/sdb4 /mnt/windows ntfs noatime 0 1 /dev/sdb5 / ext4 noatime 0 1 UUID=5AA4-168D /boot/efi vfat defaults 0 1 and localhost my_computer # stat /mnt/windows/ File: '/mnt/windows/' Size: 12288 Blocks: 24 IO Block: 512 directory Device: 814h/2068d Inode: 5 Links: 1 Access: (0700/drwx------) Uid: ( 0/ root) Gid: ( 0/ root) Access: 2014-08-21 18:29:13.597722200 -0500 Modify: 2014-08-21 18:29:13.597722200 -0500 Change: 2014-08-21 18:29:13.597722200 -0500 Birth: -

    Read the article

  • Resize ntfs system partitions with GParted?

    - by ane
    Trying to resize 2 ntfs system and boot partitions (windows 2003 server) using GParted. Goal: Resize D: (/dev/sda1) to ~850G - this is the boot drive with D:\ntldr, boot.ini, etc. Resize C: (/dev/sda5) to 100G - this is the system drive with C:\windows Tried resizing /dev/sda5 first and got the chkdsk error shown in screenshot #2. (You must run chkdsk /f). Have already run chkdsk /f on C: multiple times with no bad sectors or errors found. Have also run multiple chkdsk /f's on the underlying hard disk multiple times and rebooted way more than a couple times with the same error. How do you force gparted to ignore this error and resize? I found there is --force option to ntfsresize but don't know how to get the GParted ISO live CD to use it. How do you move the unallocated space so an extra ~750G is to the right of /dev/sda1 (D:), and an extra 10G to the right of /dev/sda5 (C:)

    Read the article

  • Mounting /var /tmp /var/log to separate partition

    - by William MacDonald
    Per DISA hardening requirements for RHEL, I'm supposed to make sure a number of locations on the filesystem are mounted on separate partitions. A few of the locations they specify include /var /tpm /var/log etc. Is it possible to go about doing this on a live machine (without booting a separate OS)? And how would I go about doing that. I've backed up the OS so if I do screw something up I can recover. Thanks!

    Read the article

  • how to install software in a different location?

    - by studiohack
    When I am installing software, I usually like to choose where it installs to, other than C:/Program Files...However, from time to time, I come across software that does not let you choose the install location...how can I get around this and choose the install location? This is handy in situations such as multiple partitions or separate system and data partitions, etc... Any ideas? Thanks! (using Windows 7)

    Read the article

< Previous Page | 33 34 35 36 37 38 39 40 41 42 43 44  | Next Page >