Search Results

Search found 1899 results on 76 pages for 'paul sorensen'.

Page 37/76 | < Previous Page | 33 34 35 36 37 38 39 40 41 42 43 44  | Next Page >

  • Python imaging alternatives

    - by Paul McMillan
    I have python code that needs to do just a couple simple things to photographs: crop, resize, and overlay a watermark. I've used PIL, and the resample/resize results are TERRIBLE. I've used imagemagick, and the interface and commands were designed by packaging a cat in a box, and then repeatedly throwing it down a set of stairs at a keyboard. I'm looking for something which is not PIL or Imagemagick that I can use with python to do simple, high-quality image transformations. For that matter, it doesn't even have to have python bindings if the command line interface is good. Oh, and it needs to be relatively platform agnostic, our production servers are linux, but some of our devs develop on windows. It can't require the installation of a bunch of silly gui code to use as a library, either.

    Read the article

  • appassembler and long classpath

    - by Paul McKenzie
    I am using maven appassembler to create my assembly. My classpath is too long and I get "The input line is too long." The suggestion here is to use booter windows platform, but I'm constrained to use Java Service Wrapper. Any way I can use java6 wildcarded classpath and java service wrapper?

    Read the article

  • How do DP and CC change in Piet?

    - by Paul Butcher
    According to the specification, Black colour blocks and the edges of the program restrict program flow. If the Piet interpreter attempts to move into a black block or off an edge, it is stopped and the CC is toggled. The interpreter then attempts to move from its current block again. If it fails a second time, the DP is moved clockwise one step. These attempts are repeated, with the CC and DP being changed between alternate attempts. If after eight attempts the interpreter cannot leave its current colour block, there is no way out and the program terminates. Unless I'm reading it incorrectly, this is at odds with the behaviour of the Fibonacci sequence example here: http://www.dangermouse.net/esoteric/piet/fibbig1.gif (from: http://www.dangermouse.net/esoteric/piet/samples.html) Specifically, why does the DP turn left at (0,3) ((0,0) being (top, left)) when it hits the left edge? At this point, both DP and CC are LEFT, so, by my reading, the sequence should then be: Attempt (and fail) to leave the block by going off the edge at (0,4), Toggle CC to RIGHT, Attempt (and fail) to leave the block by going off the edge at (0,2). Rotate DP to UP, Attempt (and succeed) to leave the block at (1,2) by entering the white block at (1,1) The behaviour indicated by the trace seems to be that DP gets rotated all the way, leaving CC at LEFT. What have I misunderstood?

    Read the article

  • Project in Eclipse that builds a jar used by another project in Eclipse

    - by Paul Tomblin
    I have several projects open in Eclipse. One of them is the main app, and others build jars used by that main app. How do I make it so that when I hit F3 on a method call in the main app that it takes me to the source in the other project instead of taking me to the class file in the Libraries list? I got it so that it shows me the source, but I can't actually edit it like it could if I go to the other project, and similarly when I step through in the debugger it doesn't go into the editable code. I don't know if it's relevant, but we're using Maven to handle the dependencies. I know this should be simple, but I haven't found the option.

    Read the article

  • Pretty Printer for T-SQL?

    - by Paul
    I'm looking for a good T-SQL Pretty Printer so that all the code looks consistant between developers in our project. Preferably a free/open source one, but paid for isn't out of the realms of possibility as long as it's reasonably priced. Are there any particular industry leaders? I'm not that fussed about what particular standard it uses, but the more configurable the better. That way we can have little style wars among the developers and have a bit of fun to boot. ;-) I suppose I should add that Visual Studio and Management Studio integration would be considered favourably.

    Read the article

  • Can Rational Team Concert and IntelliJ coexist?

    - by Paul McKenzie
    I am a long time intellij user. The company where I work is likely to introduce Rational Team Concert to our department shortly. I went to the RTC demo and it looks like a reasonable product, built around Eclipse, but I would rather not give up using IntelliJ. Does anyone have experience of using non-eclipse IDEs with RTC?

    Read the article

  • Silverlight P2P App (In Browser) - Will we get RTMFP?

    - by Paul
    Ok so from all my research I'm fairly positive P2P is not possible in Silverlight 4 (in browser). Flash can do P2P using Stratus/RTMFP which I believe uses UDP hole punching and a Stratus server to help initialize the connection. Is there any plans for Microsoft to add some kind of p2p rendezvous service in the future? Can we get a definitive yes/no on whether or not p2p is possible in SL4.

    Read the article

  • UILabel over a UIToolBar

    - by paul simmons
    Hi, I have put a UILabel over a UIToolbar. It works fine (changing colors & text) but when I click something on the toolbar, from that moment on, UILabel's text color is like 'faded'. I have tried bringing UILabel to front but that did not work. Any suggestions?.

    Read the article

  • Windows Server cannot execute a py2exe-generated app

    - by Paul Oyster
    A simple python script needs to run on a windows server with no python installed. I used py2exe, which generated a healthy dist subdirectory, with script.exe that runs fine on the local machine. However, when I run it on the server (Windows Server 2003 R2), it produces this: The system cannot execute the specified program. and ERRORLEVEL is 9020. Any ideas?

    Read the article

  • javascript framework IE6 compatibility

    - by Paul
    I want to determine the best javascript framework to use in order to maintain IE 6 compatibility. Specifically I want to know which is better for IE6 - Dojo or JQuery. Are there any benchmarks for the various javascript frameworks that quantify the work you would have to do to maintain IE6 compatibility?

    Read the article

  • JQuery datepicker defaultdate from another datepicker

    - by Paul
    Hi, I have several jquery datepickers on my asp page and I want to set the defaultdate of date picker to be the same as the previous datepicker. I am currently using defaultDate: document.getElementById('<%=txtFirstDate.ClientID%>').value This works okay, but obviously errors if firstDate is null. Should I be using OnSelect function instead? Appreciate any help

    Read the article

  • Alternatives to Java for Android development?

    - by paul.meier
    Hey all, I've started developing Android apps a couple of months ago, and have a few under my belt. While I can tolerate Java enough to keep developing, I was wondering what success the community has had getting other languages to run. I've done some investigation as to how other JVM languages work, and it appears Dalvik messes them up pretty hard. Clojure seems unable to run, Scala seems to be one of the most successful. JRuby has also had some luck, but they caution against anything major. I've also checked out Scheme via Moby and Kawa, both of which seem to have some promise. What luck have any of you had? Languages I'm missing, misrepresenting? Any non-"Hello World" apps you've written in non-Java? Any snags in trying to get another language to run (e.g. "as long as you don't use continuations, you're fine in X Scheme"). Any particular snags in developing apps non-Java, once you get them to run? Thanks, hope you well ^_^

    Read the article

  • Binary Tree in C Insertion Error

    - by Paul
    I'm quite new to C and I'm trying to implement a Binary Tree in C which will store a number and a string and then print them off e.g. 1 : Bread 2 : WashingUpLiquid etc. The code I have so far is: #include <stdio.h> #include <stdlib.h> #define LENGTH 300 struct node { int data; char * definition; struct node *left; struct node *right; }; struct node *node_insert(struct node *p, int value, char * word); void print_preorder(struct node *p); int main(void) { int i = 0; int d = 0; char def[LENGTH]; struct node *root = NULL; for(i = 0; i < 2; i++) { printf("Please enter a number: \n"); scanf("%d", &d); printf("Please enter a definition for this word:\n"); scanf("%s", def); root = node_insert(root, d, def); printf("%s\n", def); } printf("preorder : "); print_preorder(root); printf("\n"); return 0; } struct node *node_insert(struct node *p, int value, char * word) { struct node *tmp_one = NULL; struct node *tmp_two = NULL; if(p == NULL) { p = (struct node *)malloc(sizeof(struct node)); p->data = value; p->definition = word; p->left = p->right = NULL; } else { tmp_one = p; while(tmp_one != NULL) { tmp_two = tmp_one; if(tmp_one->data > value) tmp_one = tmp_one->left; else tmp_one = tmp_one->right; } if(tmp_two->data > value) { tmp_two->left = (struct node *)malloc(sizeof(struct node)); tmp_two = tmp_two->left; tmp_two->data = value; tmp_two->definition = word; tmp_two->left = tmp_two->right = NULL; } else { tmp_two->right = (struct node *)malloc(sizeof(struct node)); tmp_two = tmp_two->right; tmp_two->data = value; tmp_two->definition = word; tmp_two->left = tmp_two->right = NULL; } } return(p); } void print_preorder(struct node *p) { if(p != NULL) { printf("%d : %s\n", p->data, p->definition); print_preorder(p->left); print_preorder(p->right); } } At the moment it seems to work for the ints but the description part only prints out for the last one entered. I assume it has something to do with pointers on the char array but I had no luck getting it to work. Any ideas or advice? Thanks

    Read the article

  • Getting "Object is read only" error when setting ClientCredentials in WCF

    - by Paul Mrozowski
    I have a proxy object generated by Visual Studio (client side) named ServerClient. I am attempting to set ClientCredentials.UserName.UserName/Password before opening up a new connection using this code: InstanceContext context = new InstanceContext(this); m_client = new ServerClient(context); m_client.ClientCredentials.UserName.UserName = "Sample"; As soon as the code hits the UserName line it fails with an "Object is read-only" error. I know this can happen if the connection is already open or faulted, but at this point I haven't called context.Open() yet. I have configured the Bindings (which uses netTcpBinding) to use Message as it's security mode, and MessageClientCredentialType is set to UserName. Any ideas?

    Read the article

  • log4net versus TraceSource

    - by Paul Stovell
    In this thread many people have indicated that they use log4net. I am a fan of TraceSources and would like to know why log4net is used. Here is why I like trace sources: Pluggable listeners - XML, TextFile, Console, EventLog, roll your own Customisable trace switches (error, warning, info, verbose, start, end, custom) Customisable configuration The Logging Application Block is just a big set of TraceListeners Correlation of activities/scopes (e.g., associate all logs within an ASP.NET request with a given customer The Service Trace Viewer allows you to visualize events against these activities individually All of it is configurable in app.config/web.config. Since the .NET framework internally uses TraceSources, it also gives me a consistent way of configuring tracing - with log4net, I have to configure log4net as well as TraceSources. What does log4net give me that TraceSources don't (or that couldn't be done by writing a couple of custom TraceListeners)?

    Read the article

  • Using com.sun.net.httpserver.HttpServer for comet/cometd

    - by Paul
    Hi Wayne :) I want to use HttpServer, which you mentioned, and I think is cool to do comet/cometd. I am wondering how tough it is to do it so that I can take the waiting connections off the thread and into some waiting queue. Also, am I correct in that it looks like it is using nio? Also, is there any better examples? I always get caught up in the terminology that the javadoc uses... Thanks :)

    Read the article

  • PHP: Convert curl_exec output to UTF8

    - by Paul Tarjan
    I would like to only work with UTF8. The problem is I don't know the charset of every webpage. How can I detect it and convert to UTF8? <?php $url = "http://vkontakte.ru"; $ch = curl_init($url); $options = array( CURLOPT_RETURNTRANSFER => true, ); curl_setopt_array($ch, $options); $data = curl_exec($ch); // $data = magic($data); print $data; See this at: http://paulisageek.com/tmp/curl-utf8 What is magic()?

    Read the article

  • Django 1.4.1 error loading MySQLdb module when attempting 'python manage.py shell'

    - by Paul
    I am trying to set up MySQL, and can't seem to be able to enter the Django manage.py shell interpreter. Getting the output below: rrdhcp-10-32-44-126:django pavelfage$ python manage.py shell Traceback (most recent call last): File "manage.py", line 10, in <module> execute_from_command_line(sys.argv) File "/Library/Frameworks/Python.framework/Versions/2.7/lib/python2.7/site-packages/django/core/management/__init__.py", line 443, in execute_from_command_line utility.execute() File "/Library/Frameworks/Python.framework/Versions/2.7/lib/python2.7/site-packages/django/core/management/__init__.py", line 382, in execute self.fetch_command(subcommand).run_from_argv(self.argv) File "/Library/Frameworks/Python.framework/Versions/2.7/lib/python2.7/site-packages/django/core/management/base.py", line 196, in run_from_argv self.execute(*args, **options.__dict__) File "/Library/Frameworks/Python.framework/Versions/2.7/lib/python2.7/site-packages/django/core/management/base.py", line 232, in execute output = self.handle(*args, **options) File "/Library/Frameworks/Python.framework/Versions/2.7/lib/python2.7/site-packages/django/core/management/base.py", line 371, in handle return self.handle_noargs(**options) File "/Library/Frameworks/Python.framework/Versions/2.7/lib/python2.7/site-packages/django/core/management/commands/shell.py", line 45, in handle_noargs from django.db.models.loading import get_models File "/Library/Frameworks/Python.framework/Versions/2.7/lib/python2.7/site-packages/django/db/__init__.py", line 40, in <module> backend = load_backend(connection.settings_dict['ENGINE']) File "/Library/Frameworks/Python.framework/Versions/2.7/lib/python2.7/site-packages/django/db/__init__.py", line 34, in __getattr__ return getattr(connections[DEFAULT_DB_ALIAS], item) File "/Library/Frameworks/Python.framework/Versions/2.7/lib/python2.7/site-packages/django/db/utils.py", line 92, in __getitem__ backend = load_backend(db['ENGINE']) File "/Library/Frameworks/Python.framework/Versions/2.7/lib/python2.7/site-packages/django/db/utils.py", line 24, in load_backend return import_module('.base', backend_name) File "/Library/Frameworks/Python.framework/Versions/2.7/lib/python2.7/site-packages/django/utils/importlib.py", line 35, in import_module __import__(name) File "/Library/Frameworks/Python.framework/Versions/2.7/lib/python2.7/site-packages/django/db/backends/mysql/base.py", line 16, in <module> raise ImproperlyConfigured("Error loading MySQLdb module: %s" % e) django.core.exceptions.ImproperlyConfigured: Error loading MySQLdb module: No module named _mysql Any suggestions really appreciated.

    Read the article

  • General question about DirectShow.NET, DirectShow and Windows Media Format

    - by Paul Andrews
    I searched and googled for an answer but couldn't find one. Basically I'm developing a webcam/audio streaming application which should capture audio and video from a pc (usb webcam/microphone) and send them to a receiving server. What the server will do with that it's another story and phase two (which I'm skipping for now) I wrote some code using DirectShow and Windows Media Format and it worked great for capture audio/video and sending them to another client, but there's a major problem: latency. Everywhere in the internet everyone gave me the same answer: "sorry dude but media format isn't for video conferencing, their codecs have too high latency". I thought I could skip the .wmv problems but seems like it's not possible to do... this road ends here then. So I saw a few examples with DirectShow.NET which were faster for both audio and video.. my question is: how come that DirectShow.NET is faster and better for video/audio conferencing? Shouldn't it be just a .NET porting of C++'s DirectShow? Am I missing something? I'm a bit confused at this point

    Read the article

  • Importing a dmp with partitioned tables into Oracle XE

    - by Paul
    I've got a schema containing partitioned tables. I can use exp to create a .dmp, but when I import that into Oracle XE, I get errors because Oracle XE doesn't support partitioned tables. How do I get the .dmp imported into Oracle XE? I think pre-creating the tables might do it, but how do I extract the DDL in some automated way to do this? Or can I create the exp somehow without partitions?

    Read the article

  • Keystrokes in Winforms app causing window to close unexpectedly

    - by Paul Sasik
    I have a strange issue that has arisen recently: Whenever I enter text, even a single character, into a textbox in any Form in my application it causes the form and its parent to close. I've checked for the following so far: Errant/mis-assigned event handlers that may be interpreting a keystroke as a Form cancel I am using keypreview in several windows but debugging shows this to not be a cause Happens in any form of the application Happens even with brand new text boxes dropped on the form Tried removing the WithEvents declaration from text box declarations (VB.NET) The result is DialogResult.Cancel when I break the code after Show or ShowDialog The forms do not use AcceptButton or CancelButton properties (set to none) Note: I am modifying a large codebase with a lot of code that I have yet to touch What else could be causing this strange behavior?

    Read the article

  • asp mvc unit test HttpContext.Current.Cache?

    - by Paul Creasey
    Here is the first part of my controller code: public class ControlMController : Controller { IControlMService _controlMservice; public IList<User> Users { get { if (System.Web.HttpContext.Current.Cache["users"] == null) { System.Web.HttpContext.Current.Cache["users"] = _controlMservice.GetUsers(); } return (IList<User>)System.Web.HttpContext.Current.Cache["users"]; } } public ControlMController(IControlMService controlMservice) { this._controlMservice = controlMservice; var users = Users; ViewData["Users"] = users; ViewData["jqSelectUsers"] = string.Join(";", users.Select(x => x.UserID + ":" + x.Name).ToArray()); } I'm trying to test it, and because i'm caching using the HttpContext, i'm struggling with null reference exceptions. I've tried using MvcContrib.TestHelper; here is my sample test... [TestMethod] public void EventDetails_Returns_view_with_correct_event() { var builder = new TestControllerBuilder(); var controller = builder.CreateController<ControlMController>( new ControlMService( new MockControlMRepository() )); var view = (controller.EventDetails(1) as ViewResult); Assert.AreEqual(1, (view.ViewData.Model as Event).EventId); } (I haven't quite got round to using DI for my tests! I'm still getting the same null reference exception when the code hits the httpcontext: Error 1 TestCase 'SupportTool.Tests.Services.ControlM.ControlMControllerTests.EventDetails_Returns_view_with_correct_event' failed: System.NullReferenceException: Object reference not set to an instance of an object. at SupportTool.web.Controllers.ControlMController.get_Users() Any ideas?

    Read the article

  • Using jQuery.getJSON in Chrome Extension

    - by Paul Tarjan
    I need to do a cross-domain request in a chrome extension. I know I can it via message passing but I'd rather stick to just jQuery idioms (so my javascript can also work as a <script src="">). I do the normal: $.getJSON("http://api.flickr.com/services/feeds/photos_public.gne?tags=cat&tagmode=any&format=json&jsoncallback=?", callback(function(data) { alert(data); }); but in the error console I see: Uncaught ReferenceError: jsonp1271044791817 is not defined Is jQuery not inserting the callback function correctly into the document? What can I do to make this work?

    Read the article

  • javascript regular expression search a pattern A(xyz).

    - by Paul
    I need to find all substrings from a string that starting with a given string following with a left bracket and then any legal literal and then the right bracket. For example, a string is abcd(xyz)efcd(opq), I want to a function that returns "cd(xyz)" and "cd(opq)". I wrote a regular expression, but it returns only cd( and cd(...

    Read the article

< Previous Page | 33 34 35 36 37 38 39 40 41 42 43 44  | Next Page >