Search Results

Search found 6955 results on 279 pages for 'sara mara 32'.

Page 37/279 | < Previous Page | 33 34 35 36 37 38 39 40 41 42 43 44  | Next Page >

• Why is my router not routing?

  - by dwj

  Starting a week and half ago my router stopped working with my cable modem. I went to sleep with it working and woke up with it not. I swapped in another router and am still having issues; I was gone for 10 days so now I'm back to trying to figure it out. While I was gone I left everything (cable modem, router, and computer) powered off. My setup: Comcast Ambit cable modem (from Comcast) Netgear WGR614 v4 router -- replaced with Linksys WRT54GS v1.1 Windows XP SP3 other computers, all currently unplugged The modem is using the firmware (ver 2.105.2001) provided by Comcast; hardware version 1.3 The Linksys router is using FW ver 4.71.4 (latest for this release of HW), factory defaults I am only using the wired connections; no wireless. I have swapped out all of the cat5 cable. If I plug my computer directly into the cable modem, I can ping by name or number. Everything works perfectly. If I plug my computer into the router and the router into the modem, I cannot access anything outside of my local network. This is the exact setup I've used for the past 5 years; there were no changes in the past year. Now here's the interesting part: I can log into the Linksys router and get status information from it; everything appears good. Using the Diagnostics, I can run ping and traceroute to any site on the internet. These work perfectly. From my computer, I can ping the router and the modem. However, I cannot ping anything on the internet by with name or number. If I plug in another computer, I can ping it successfully. I've included two transcripts below that show these two attempts. Addresses, DNS, gateways, etc. look good. I cannot access the internet through either router. I am at a loss here. Suggestions? Help! Computer to Router to Cable Modem C:\ipconfig /renew Windows IP Configuration No operation can be performed on Bluetooth Network while it has its media disconnected. Ethernet adapter Local Area Connection: Connection-specific DNS Suffix . : hsd1.ca.comcast.net. IP Address. . . . . . . . . . . . : 192.168.1.100 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : 192.168.1.1 Ethernet adapter Bluetooth Network: Media State . . . . . . . . . . . : Media disconnected C:\ipconfig /all Windows IP Configuration Host Name . . . . . . . . . . . . : wynton Primary Dns Suffix . . . . . . . : Node Type . . . . . . . . . . . . : Unknown IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : No DNS Suffix Search List. . . . . . : hsd1.ca.comcast.net. Ethernet adapter Local Area Connection: Connection-specific DNS Suffix . : hsd1.ca.comcast.net. Description . . . . . . . . . . . : Intel(R) 82562V-2 10/100 Network Connection Physical Address. . . . . . . . . : 00-1D-09-9B-45-EB Dhcp Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes IP Address. . . . . . . . . . . . : 192.168.1.100 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : 192.168.1.1 DHCP Server . . . . . . . . . . . : 192.168.1.1 DNS Servers . . . . . . . . . . . : 68.87.76.178 68.87.78.130 Lease Obtained. . . . . . . . . . : Monday, March 22, 2010 10:21:55 PM Lease Expires . . . . . . . . . . : Tuesday, March 23, 2010 10:21:55 PM Ethernet adapter Bluetooth Network: Media State . . . . . . . . . . . : Media disconnected Description . . . . . . . . . . . : Bluetooth LAN Access Server Driver Physical Address. . . . . . . . . : 00-0A-3A-6F-68-41 C:\ping google.com Ping request could not find host google.com. Please check the name and try again . C:\ping 74.125.19.104 Pinging 74.125.19.104 with 32 bytes of data: Request timed out. Request timed out. Request timed out. Request timed out. Ping statistics for 74.125.19.104: Packets: Sent = 4, Received = 0, Lost = 4 (100% loss), C:\ Computer to Cable Modem Directly C:\ipconfig /renew Windows IP Configuration No operation can be performed on Bluetooth Network while it has its media disconnected. Ethernet adapter Local Area Connection: Connection-specific DNS Suffix . : hsd1.ca.comcast.net. IP Address. . . . . . . . . . . . : 71.204.149.195 Subnet Mask . . . . . . . . . . . : 255.255.252.0 Default Gateway . . . . . . . . . : 71.204.148.1 Ethernet adapter Bluetooth Network: Media State . . . . . . . . . . . : Media disconnected C:\ipconfig /all Windows IP Configuration Host Name . . . . . . . . . . . . : wynton Primary Dns Suffix . . . . . . . : Node Type . . . . . . . . . . . . : Unknown IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : No DNS Suffix Search List. . . . . . : hsd1.ca.comcast.net. Ethernet adapter Local Area Connection: Connection-specific DNS Suffix . : hsd1.ca.comcast.net. Description . . . . . . . . . . . : Intel(R) 82562V-2 10/100 Network Connection Physical Address. . . . . . . . . : 00-1D-09-9B-45-EB Dhcp Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes IP Address. . . . . . . . . . . . : 71.204.149.195 Subnet Mask . . . . . . . . . . . : 255.255.252.0 Default Gateway . . . . . . . . . : 71.204.148.1 DHCP Server . . . . . . . . . . . : 68.87.76.10 DNS Servers . . . . . . . . . . . : 68.87.76.178 68.87.78.130 Lease Obtained. . . . . . . . . . : Monday, March 22, 2010 10:18:50 PM Lease Expires . . . . . . . . . . : Monday, March 22, 2010 11:12:31 PM Ethernet adapter Bluetooth Network: Media State . . . . . . . . . . . : Media disconnected Description . . . . . . . . . . . : Bluetooth LAN Access Server Driver Physical Address. . . . . . . . . : 00-0A-3A-6F-68-41 C:\ping google.com Pinging google.com [74.125.19.99] with 32 bytes of data: Reply from 74.125.19.99: bytes=32 time=20ms TTL=55 Reply from 74.125.19.99: bytes=32 time=17ms TTL=55 Reply from 74.125.19.99: bytes=32 time=28ms TTL=55 Reply from 74.125.19.99: bytes=32 time=18ms TTL=55 Ping statistics for 74.125.19.99: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 17ms, Maximum = 28ms, Average = 20ms C:\ping 74.125.19.104 Pinging 74.125.19.104 with 32 bytes of data: Reply from 74.125.19.104: bytes=32 time=18ms TTL=55 Reply from 74.125.19.104: bytes=32 time=18ms TTL=55 Reply from 74.125.19.104: bytes=32 time=17ms TTL=55 Reply from 74.125.19.104: bytes=32 time=16ms TTL=55 Ping statistics for 74.125.19.104: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 16ms, Maximum = 18ms, Average = 17ms C:\

  Read the article

• Routing a PPTP client and VMware Server instance running on the same box

  - by servermanfail

  I have a Windows 2003 SBS box. It has 2 physical NIC's: WAN and LAN. The WAN is a public IP. The LAN is a simple 192.168.2.x subnet with Microsoft DHCP Server. Microsoft Routing and Remote Access Service is used to provide NAT to LAN. The box also runs VMware Server with a virtual machine running Windows XP. I want people to be able to VPN into the box, and connect to these virtual machines on the MSRDP port. I can VPN (PPTP) into the 2003 SBS box fine, as well as ping other machines on the LAN. I can ping the VM from a physical workstation on the LAN and vice-versa. I can ping the VPN client from the a physical workstation on the LAN and vice-versa. I can ping the VPN client from the Server console and vice-versa. I can ping the VM client from the Server console and vice-versa. But I cannot ping the VPN client from the VM and vice-versa. I was hoping to set up 2 or 3 Windows XP virtual machines on our only server, so that a couple of people can remote in to work without having to leave a physical machine on in the office. You could this attempted set up a "poor mans terminal server". On the 2003 SBS Server:- C:\Documents and Settings\Administrator>route print IPv4 Route Table =========================================================================== Interface List 0x1 ........................... MS TCP Loopback interface 0x2 ...00 50 56 c0 00 08 ...... VMware Virtual Ethernet Adapter for VMnet8 0x3 ...00 50 56 c0 00 01 ...... VMware Virtual Ethernet Adapter for VMnet1 0x10004 ...00 53 45 00 00 00 ...... WAN (PPP/SLIP) Interface 0x10005 ...00 11 43 d4 69 13 ...... Broadcom NetXtreme Gigabit Ethernet 0x10006 ...00 11 43 d4 69 14 ...... Broadcom NetXtreme Gigabit Ethernet #2 =========================================================================== =========================================================================== Active Routes: Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 81.123.144.22 81.123.144.21 1 81.123.144.20 255.255.255.252 81.123.144.21 81.123.144.21 1 81.123.144.21 255.255.255.255 127.0.0.1 127.0.0.1 1 81.255.255.255 255.255.255.255 81.123.144.21 81.123.144.21 1 86.135.78.235 255.255.255.255 81.123.144.22 81.123.144.21 1 109.152.62.236 255.255.255.255 81.123.144.22 81.123.144.21 1 127.0.0.0 255.0.0.0 127.0.0.1 127.0.0.1 1 192.168.2.0 255.255.255.0 192.168.2.3 192.168.2.3 1 192.168.2.3 255.255.255.255 127.0.0.1 127.0.0.1 1 192.168.2.26 255.255.255.255 192.168.2.32 192.168.2.32 1 192.168.2.28 255.255.255.255 192.168.2.32 192.168.2.32 1 192.168.2.32 255.255.255.255 127.0.0.1 127.0.0.1 50 192.168.2.50 255.255.255.255 127.0.0.1 127.0.0.1 1 192.168.2.255 255.255.255.255 192.168.2.3 192.168.2.3 1 192.168.10.0 255.255.255.0 192.168.10.1 192.168.10.1 20 192.168.10.1 255.255.255.255 127.0.0.1 127.0.0.1 20 192.168.10.255 255.255.255.255 192.168.10.1 192.168.10.1 20 192.168.96.0 255.255.255.0 192.168.96.1 192.168.96.1 20 192.168.96.1 255.255.255.255 127.0.0.1 127.0.0.1 20 192.168.96.255 255.255.255.255 192.168.96.1 192.168.96.1 20 224.0.0.0 240.0.0.0 81.123.144.21 81.123.144.21 1 224.0.0.0 240.0.0.0 192.168.2.3 192.168.2.3 1 224.0.0.0 240.0.0.0 192.168.10.1 192.168.10.1 20 224.0.0.0 240.0.0.0 192.168.96.1 192.168.96.1 20 255.255.255.255 255.255.255.255 81.123.144.21 81.123.144.21 1 255.255.255.255 255.255.255.255 192.168.2.3 192.168.2.3 1 255.255.255.255 255.255.255.255 192.168.10.1 192.168.10.1 1 255.255.255.255 255.255.255.255 192.168.96.1 192.168.96.1 1 Default Gateway: 81.123.144.22 =========================================================================== Persistent Routes: None C:\Documents and Settings\Administrator>ipconfig /all Windows IP Configuration Host Name . . . . . . . . . . . . : 2003server Primary Dns Suffix . . . . . . . : mycompany.local Node Type . . . . . . . . . . . . : Unknown IP Routing Enabled. . . . . . . . : Yes WINS Proxy Enabled. . . . . . . . : Yes DNS Suffix Search List. . . . . . : mycompany.local gateway.2wire.net Ethernet adapter VMware Network Adapter VMnet8: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : VMware Virtual Ethernet Adapter for VMnet 8 Physical Address. . . . . . . . . : 00-50-56-C0-00-08 DHCP Enabled. . . . . . . . . . . : No IP Address. . . . . . . . . . . . : 192.168.10.1 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : Ethernet adapter VMware Network Adapter VMnet1: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : VMware Virtual Ethernet Adapter for VMnet 1 Physical Address. . . . . . . . . : 00-50-56-C0-00-01 DHCP Enabled. . . . . . . . . . . : No IP Address. . . . . . . . . . . . : 192.168.96.1 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : PPP adapter RAS Server (Dial In) Interface: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : WAN (PPP/SLIP) Interface Physical Address. . . . . . . . . : 00-53-45-00-00-00 DHCP Enabled. . . . . . . . . . . : No IP Address. . . . . . . . . . . . : 192.168.2.32 Subnet Mask . . . . . . . . . . . : 255.255.255.255 Default Gateway . . . . . . . . . : NetBIOS over Tcpip. . . . . . . . : Disabled Ethernet adapter LAN: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Broadcom NetXtreme Gigabit Ethernet Physical Address. . . . . . . . . : 00-11-43-D4-69-13 DHCP Enabled. . . . . . . . . . . : No IP Address. . . . . . . . . . . . : 192.168.2.50 Subnet Mask . . . . . . . . . . . : 255.255.255.0 IP Address. . . . . . . . . . . . : 192.168.2.3 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : DNS Servers . . . . . . . . . . . : 192.168.2.3 Primary WINS Server . . . . . . . : 192.168.2.3 Ethernet adapter WAN: Connection-specific DNS Suffix . : gateway.2wire.net Description . . . . . . . . . . . : Broadcom NetXtreme Gigabit Ethernet #2 Physical Address. . . . . . . . . : 00-11-43-D4-69-14 DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes IP Address. . . . . . . . . . . . : 81.123.144.21 Subnet Mask . . . . . . . . . . . : 255.255.255.252 Default Gateway . . . . . . . . . : 81.123.144.22 DHCP Server . . . . . . . . . . . : 10.0.0.1 DNS Servers . . . . . . . . . . . : 10.0.0.1 Primary WINS Server . . . . . . . : 192.168.2.3 NetBIOS over Tcpip. . . . . . . . : Disabled Lease Obtained. . . . . . . . . . : 25 February 2011 22:56:59 Lease Expires . . . . . . . . . . : 25 February 2011 23:06:59 C:\Documents and Settings\Administrator>ping 192.168.2.11 Pinging 192.168.2.11 with 32 bytes of data: Reply from 192.168.2.11: bytes=32 time<1ms TTL=128 Reply from 192.168.2.11: bytes=32 time<1ms TTL=128 Reply from 192.168.2.11: bytes=32 time<1ms TTL=128 Reply from 192.168.2.11: bytes=32 time<1ms TTL=128

  Read the article

• Hacked website, code is encrypted in hex, unable to identify

  - by dhakad

  my web site hacked and i am getting code in index page, but i am unable to find that where is the code in my web site... %3c%68%74%6d%6c%3e%3c%68%65%61%64%3e%0d%0a%3c%6d%65%74%61%20%63%6f%6e%74%65%6e%74%3d%22%74%65%78%74%2f%68%74%6d%6c%3b%20%63%68%61%72%73%65%74%3d%75%74%66%2d%38%22%3e%0d%0a%3c%74%69%74%6c%65%3e%2e%2f%20%72%45%64%20%58%20%7c%20%33%78%70%31%72%33%20%43%79%62%65%72%20%41%72%6d%79%3c%2f%74%69%74%6c%65%3e%0d%0a%3c%6d%65%74%61%20%6e%61%6d%65%3d%22%61%75%74%68%6f%72%22%20%63%6f%6e%74%65%6e%74%3d%22%72%45%64%20%58%22%20%2f%3e%0d%0a%3c%6d%65%74%61%20%6e%61%6d%65%3d%22%6b%65%79%77%6f%72%64%73%22%20%63%6f%6e%74%65%6e%74%3d%22%72%45%64%20%58%2c%33%78%70%31%72%33%20%43%79%62%65%72%20%41%72%6d%79%2c%5a%6f%6e%65%2d%48%2c%42%61%6e%67%6c%61%64%65%73%68%69%20%48%61%63%6b%65%72%22%20%2f%3e%0d%0a%3c%6d%65%74%61%20%6e%61%6d%65%3d%22%64%65%73%63%72%69%70%74%69%6f%6e%22%20%63%6f%6e%74%65%6e%74%3d%22%5b%20%72%45%64%20%58%20%2e%2e%20%54%68%65%20%52%65%61%6c%20%4f%75%74%72%61%67%65%6f%75%73%20%5d%22%20%2f%3e%0d%0a%3c%6c%69%6e%6b%20%72%65%6c%3d%22%53%48%4f%52%54%43%55%54%20%49%43%4f%4e%22%20%68%72%65%66%3d%22%68%74%74%70%3a%2f%2f%75%73%2e%79%69%6d%67%2e%63%6f%6d%2f%69%2f%6d%65%73%67%2f%65%6d%6f%74%69%63%6f%6e%73%37%2f%36%31%2e%67%69%66%22%3e%0d%0a%3c%73%74%79%6c%65%20%74%79%70%65%3d%22%74%65%78%74%2f%63%73%73%22%3e%0d%0a%62%6f%64%79%20%7b%62%61%63%6b%67%72%6f%75%6e%64%2d%69%6d%61%67%65%3a%20%75%72%6c%28%68%74%74%70%3a%2f%2f%6d%65%64%69%61%2e%73%6f%6d%65%77%68%65%72%65%69%6e%62%6c%6f%67%2e%6e%65%74%2f%69%6d%61%67%65%73%2f%6f%6e%64%68%6f%6b%61%72%65%72%5f%72%61%6a%70%75%74%72%61%5f%31%33%33%38%32%35%30%34%33%31%5f%31%2d%62%67%2e%67%69%66%29%3b%0d%0a%62%61%63%6b%67%72%6f%75%6e%64%2d%63%6f%6c%6f%72%3a%20%62%6c%61%63%6b%3b%63%6f%6c%6f%72%3a%20%23%46%46%41%35%30%30%3b%66%6f%6e%74%2d%77%65%69%67%68%74%3a%20%62%6f%6c%64%3b%74%65%78%74%2d%61%6c%69%67%6e%3a%20%63%65%6e%74%65%72%3b%7d%0d%0a%69%6d%67%7b%6f%70%61%63%69%74%79%3a%30%2e%37%35%3b%20%66%69%6c%74%65%72%3a%61%6c%70%68%61%28%6f%70%61%63%69%74%79%3d%37%35%29%3b%7d%0d%0a%2e%72%65%64%78%20%7b%74%65%78%74%2d%73%68%61%64%6f%77%3a%20%30%20%30%20%36%70%78%20%72%65%64%2c%20%30%20%30%20%35%70%78%20%72%65%64%2c%20%30%20%30%20%35%70%78%20%72%65%64%3b%63%6f%6c%6f%72%3a%20%23%46%46%46%7d%0d%0a%3c%2f%73%74%79%6c%65%3e%0d%0a%3c%2f%68%65%61%64%3e%0d%0a%3c%62%6f%64%79%20%6f%6e%63%6f%6e%74%65%78%74%6d%65%6e%75%3d%22%72%65%74%75%72%6e%20%66%61%6c%73%65%22%20%6f%6e%6b%65%79%64%6f%77%6e%3d%22%72%65%74%75%72%6e%20%66%61%6c%73%65%22%20%6f%6e%6d%6f%75%73%65%64%6f%77%6e%3d%22%72%65%74%75%72%6e%20%66%61%6c%73%65%22%3e%0d%0a%3c%64%69%76%20%73%74%79%6c%65%3d%22%66%6f%6e%74%2d%66%61%6d%69%6c%79%3a%20%50%61%6c%61%74%69%6e%6f%20%4c%69%6e%6f%74%79%70%65%3b%66%6f%6e%74%2d%73%69%7a%65%3a%20%34%36%70%78%3b%22%20%63%6c%61%73%73%3d%22%72%65%64%78%22%3e%2e%3a%3a%20%72%45%64%20%58%20%57%61%73%20%48%65%72%65%20%3a%3a%2e%3c%2f%64%69%76%3e%3c%62%72%2f%3e%0d%0a%3c%69%6d%67%20%73%72%63%3d%22%68%74%74%70%3a%2f%2f%6d%65%64%69%61%2e%73%6f%6d%65%77%68%65%72%65%69%6e%62%6c%6f%67%2e%6e%65%74%2f%69%6d%61%67%65%73%2f%6f%6e%64%68%6f%6b%61%72%65%72%5f%72%61%6a%70%75%74%72%61%5f%31%33%35%33%35%35%32%36%35%31%5f%31%2d%72%65%64%2d%78%2e%6a%70%67%22%3e%3c%62%72%2f%3e%0d%0a%3c%64%69%76%20%73%74%79%6c%65%3d%22%66%6f%6e%74%2d%66%61%6d%69%6c%79%3a%20%42%6f%6f%6b%6d%61%6e%20%4f%6c%64%20%53%74%79%6c%65%3b%63%6f%6c%6f%72%3a%20%23%30%30%30%3b%66%6f%6e%74%2d%73%69%7a%65%3a%20%32%30%70%78%3b%6d%61%72%67%69%6e%3a%30%3b%74%65%78%74%2d%73%68%61%64%6f%77%3a%20%30%20%31%70%78%20%33%70%78%20%23%30%30%46%46%30%30%2c%20%2d%31%70%78%20%30%20%33%70%78%20%23%30%30%46%46%30%30%2c%20%30%20%2d%31%70%78%20%33%70%78%20%23%30%30%46%46%30%30%2c%20%31%70%78%20%30%20%33%70%78%20%23%30%30%46%46%30%30%3b%22%3e%50%72%6f%75%64%20%54%6f%20%62%65%20%61%20%42%61%6e%67%6c%61%64%65%73%68%69%20%48%61%63%6b%65%72%3c%2f%64%69%76%3e%3c%62%72%2f%3e%0d%0a%3c%64%69%76%20%73%74%79%6c%65%3d%22%66%6f%6e%74%2d%66%61%6d%69%6c%79%3a%20%42%65%72%6c%69%6e%20%53%61%6e%73%20%46%42%3b%63%6f%6c%6f%72%3a%20%23%31%35%31%42%35%34%3b%66%6f%6e%74%2d%73%69%7a%65%3a%20%32%30%70%78%3b%74%65%78%74%2d%73%68%61%64%6f%77%3a%20%30%20%30%20%33%70%78%20%23%30%30%46%46%30%30%2c%20%30%20%30%20%33%70%78%20%23%30%30%46%46%30%30%2c%20%30%20%30%20%33%70%78%20%23%66%66%66%2c%20%30%20%30%20%35%70%78%20%23%46%30%30%2c%20%30%20%30%20%35%70%78%20%23%66%66%32%64%39%35%3b%22%3e%44%65%61%72%20%41%44%4d%49%4e%3c%62%72%2f%3e%21%20%53%65%63%75%72%65%20%79%6f%75%72%20%53%49%54%45%20%21%3c%2f%64%69%76%3e%3c%62%72%2f%3e%0d%0a%3c%64%69%76%20%73%74%79%6c%65%3d%22%66%6f%6e%74%2d%73%69%7a%65%3a%20%31%38%70%78%3b%66%6f%6e%74%2d%66%61%6d%69%6c%79%3a%20%43%65%6e%74%75%72%79%20%47%6f%74%68%69%63%3b%63%6f%6c%6f%72%3a%20%23%30%30%30%3b%74%65%78%74%2d%73%68%61%64%6f%77%3a%20%30%20%30%20%33%70%78%20%6c%69%6d%65%2c%20%30%20%30%20%33%70%78%20%6c%69%6d%65%2c%20%30%20%30%20%35%70%78%20%23%66%66%32%64%39%35%2c%20%30%20%30%20%35%70%78%20%23%66%66%32%64%39%35%3b%22%3e%72%65%64%2d%78%40%68%61%63%6b%65%72%6d%61%69%6c%2e%63%6f%6d%3c%2f%64%69%76%3e%0d%0a%3c%62%72%2f%3e%3c%64%69%76%20%73%74%79%6c%65%3d%22%66%6f%6e%74%2d%73%69%7a%65%3a%20%32%30%70%78%3b%22%3e%2e%2e%3a%3a%7c%20%47%72%65%65%74%7a%20%7c%3a%3a%2e%2e%3c%2f%64%69%76%3e%0d%0a%3c%64%69%76%20%73%74%79%6c%65%3d%22%66%6f%6e%74%2d%66%61%6d%69%6c%79%3a%20%42%6f%6f%6b%20%41%6e%74%69%71%75%61%3b%63%6f%6c%6f%72%3a%20%67%72%65%79%3b%66%6f%6e%74%2d%73%69%7a%65%3a%20%32%30%70%78%3b%74%65%78%74%2d%73%68%61%64%6f%77%3a%20%72%65%64%20%31%70%78%20%2d%30%70%78%20%36%70%78%22%3e%2e%3a%3a%20%78%33%6f%2d%31%33%33%37%20%7c%20%47%61%62%62%79%20%7c%20%24%70%21%72%21%74%7e%24%33%33%6b%33%72%20%7c%20%46%72%45%61%4b%79%20%3a%3a%2e%3c%62%72%2f%3e%41%6c%6c%20%4d%65%6d%62%65%72%73%20%6f%66%20%33%78%70%31%72%33%20%43%79%62%65%72%20%41%72%6d%79%3c%2f%64%69%76%3e%3c%62%72%2f%3e%0d%0a%3c%65%6d%62%65%64%20%73%72%63%3d%22%68%74%74%70%3a%2f%2f%79%6f%75%74%75%62%65%2e%67%6f%6f%67%6c%65%61%70%69%73%2e%63%6f%6d%2f%76%2f%70%74%5a%31%77%6f%33%4a%73%50%63%26%61%75%74%6f%70%6c%61%79%3d%31%26%6c%6f%6f%70%3d%31%22%20%74%79%70%65%3d%22%61%70%70%6c%69%63%61%74%69%6f%6e%2f%78%2d%73%68%6f%63%6b%77%61%76%65%2d%66%6c%61%73%68%22%20%77%6d%6f%64%65%3d%22%74%72%61%6e%73%70%61%72%65%6e%74%22%20%77%69%64%74%68%3d%22%31%22%20%68%65%69%67%68%74%3d%22%31%22%3e%3c%2f%62%6f%64%79%3e%3c%2f%68%74%6d%6c%3e'

  Read the article

• How did my email end up in spam? Spam only filters this specific email, other email contents work

  - by mugetsu

  My website has users buy our products and when the purchase completes, it sends the user an email. However, this email always ends up in spam! When the user first registers, the site also sends an email, this email however is not filtered and goes into the normal inbox. I'm not quite sure why this is so, gmail vaguely tells me that " It's similar to messages that were detected by our spam filters." So I'm thinking that I need to reword the following email better. Can I get some tips? Or could something else be causing this? thanks! here's the unformatted email: Delivered-To: [email protected] Received: by 10.112.32.98 with SMTP id h2csp61953lbi; Tue, 20 Mar 2012 21:09:13 -0700 (PDT) Received: by 10.180.79.72 with SMTP id h8mr22836827wix.1.1332302953175; Tue, 20 Mar 2012 21:09:13 -0700 (PDT) Return-Path: <[email protected]> Received: from mail26.elasticemail.org (mail26.elasticemail.org. [178.32.180.26]) by mx.google.com with SMTP id 6si518487wiz.41.2012.03.20.21.09.12; Tue, 20 Mar 2012 21:09:12 -0700 (PDT) Received-SPF: pass (google.com: domain of [email protected] designates 178.32.180.26 as permitted sender) client-ip=178.32.180.26; Authentication-Results: mx.google.com; spf=pass (google.com: domain of [email protected] designates 178.32.180.26 as permitted sender) [email protected]; dkim=pass [email protected] DKIM-Signature: v=1; a=rsa-sha1; bh=qjc8jxQuGy9pLN1YV9TR2PHQYKg=; c=relaxed/relaxed; d=website.com; s=api; h=DomainKey-Signature:MIME-Version:From:To:List-Unsubscribe:Subject:Date:Reply-To:Message-ID:Content-Type; b=Odt+nYhjntXPl7JPVHeJWjkStemt6so+FPVYY6oMKziMFzmW8YiLhN8WwSLY0faMcn/rirKsO2dOm/kvcHlqUJC7ldhaydE6bPekkBDa9kBovlGwPNm6xy9QWPP9I1fXDLDCwqqeAXv8kN0daXbh3pVyqWNUOk5cgQ35OgpQpKI= DomainKey-Signature: q=dns; a=rsa-sha1; c=simple; d=website.com; s=api; h=MIME-Version:X-Mailer:From:To:X-Priority:List-Unsubscribe:Subject:Date:Reply-To:Message-ID:Content-Type; b=F7NNZIEyEV+64uYD8pVpe91WLP19Tw2Whk4OKpkLeAfkmrNIA7AjP0XYU1JWTlEyibHQJjjbhR62I3MvVJBSGp75eWfOuwb2AqYWZ/jAlMWznnfQLVv7OlYJsErGxYP6GUNNcuJaqlTPFDanJwtaEvR+tqXZRB7xrUisMd8lq2I= MIME-Version: 1.0 X-Mailer: email.website.com From: "Website Contact" <[email protected]> To: [email protected] X-Priority: 3 (Normal) List-Unsubscribe: <http://email.website.com/tracking/unsubscribe?msgid=su6g-8kfd0s0g>, <mailto:[email protected]?subject=unsubscribe> Subject: Website Tickets: event Date: Wed, 21 Mar 2012 04:09:17 +0000 Reply-To: "Website Contact" <[email protected]> Message-ID: <[email protected]> Content-Type: multipart/alternative; boundary="----=_NextPart_000_3F77_7A0DF805.A8C886C0" ------=_NextPart_000_3F77_7A0DF805.A8C886C0 Content-Type: text/plain; charset="utf-8" Content-Transfer-Encoding: base64 SGVsbG8hIAoKIEhlcmUgYXJlIHlvdXIgdGlja2V0KHMpIGZvciBDVEFTIGVDc1RBU3kgMjAxMjog CgpodHRwczovL2NhbXB1c2FtcC5jb20vP3RpY2tldHMvNy95aGloZ3Znd3Z3cWR3cXhtdnQKClNp bXBseSBicmluZyBpdCB3aXRoIHlvdSBvbiB5b3VyIHNtYXJ0cGhvbmUsIG9yIHByaW50IHRoZSB0 aWNrZXQgb3V0IHRvIGJlIHNjYW5uZWQgYXQgdGhlIGV2ZW50LiBFbmpveSwgYW5kIHdlIGFwcHJl Y2lhdGUgeW91ciBwdXJjaGFzZS4KClNpbmNlcmVseSwKVGhlIENhbXB1c0FtcCBUZWFt ------=_NextPart_000_3F77_7A0DF805.A8C886C0 Content-Type: text/html; charset="utf-8" Content-Transfer-Encoding: base64 SGVsbG8hIDxici8+PGJyLz4gSGVyZSBhcmUgeW91ciB0aWNrZXQocykgZm9yIENUQVMgZUNzVEFT eSAyMDEyOjxici8+PGEgaHJlZj0iaHR0cDovL2VtYWlsLmNhbXB1c2FtcC5jb20vdHJhY2tpbmcv Y2xpY2s/bXNnaWQ9c3U2Zy04a2ZkMHMwZyZ0YXJnZXQ9aHR0cHMlM2ElMmYlMmZjYW1wdXNhbXAu Y29tJTJmJTNmdGlja2V0cyUyZjclMmZ5aGloZ3Znd3Z3cWR3cXhtdnQiPiBodHRwczovL2NhbXB1 c2FtcC5jb20vP3RpY2tldHMvNy95aGloZ3Znd3Z3cWR3cXhtdnQgIDwvYT4gPGJyLz48YnIvPlNp bXBseSBicmluZyBpdCB3aXRoIHlvdSBvbiB5b3VyIHNtYXJ0cGhvbmUsIG9yIHByaW50IHRoZSB0 aWNrZXQgb3V0IHRvIGJlIHNjYW5uZWQgYXQgdGhlIGV2ZW50LiBFbmpveSwgYW5kIHdlIGFwcHJl Y2lhdGUgeW91ciBwdXJjaGFzZS48YnIvPjxici8+U2luY2VyZWx5LDxici8+VGhlIENhbXB1c0Ft cCBUZWFtPGltZyBzcmM9Imh0dHA6Ly9lbWFpbC5jYW1wdXNhbXAuY29tL3RyYWNraW5nL29wZW4/ bXNnaWQ9c3U2Zy04a2ZkMHMwZyIgc3R5bGU9IndpZHRoOjFweDtoZWlnaHQ6MXB4IiBhbHQ9IiIg Lz4= ------=_NextPart_000_3F77_7A0DF805.A8C886C0--

  Read the article

• Oracle TimesTen In-Memory Database Performance on SPARC T4-2

  - by Brian

  The Oracle TimesTen In-Memory Database is optimized to run on Oracle's SPARC T4 processor platforms running Oracle Solaris 11 providing unsurpassed scalability, performance, upgradability, protection of investment and return on investment. The following demonstrate the value of combining Oracle TimesTen In-Memory Database with SPARC T4 servers and Oracle Solaris 11: On a Mobile Call Processing test, the 2-socket SPARC T4-2 server outperforms: Oracle's SPARC Enterprise M4000 server (4 x 2.66 GHz SPARC64 VII+) by 34%. Oracle's SPARC T3-4 (4 x 1.65 GHz SPARC T3) by 2.7x, or 5.4x per processor. Utilizing the TimesTen Performance Throughput Benchmark (TPTBM), the SPARC T4-2 server protects investments with: 2.1x the overall performance of a 4-socket SPARC Enterprise M4000 server in read-only mode and 1.5x the performance in update-only testing. This is 4.2x more performance per processor than the SPARC64 VII+ 2.66 GHz based system. 10x more performance per processor than the SPARC T2+ 1.4 GHz server. 1.6x better performance per processor than the SPARC T3 1.65 GHz based server. In replication testing, the two socket SPARC T4-2 server is over 3x faster than the performance of a four socket SPARC Enterprise T5440 server in both asynchronous replication environment and the highly available 2-Safe replication. This testing emphasizes parallel replication between systems. Performance Landscape Mobile Call Processing Test Performance System Processor Sockets/Cores/Threads Tps SPARC T4-2 SPARC T4, 2.85 GHz 2 16 128 218,400 M4000 SPARC64 VII+, 2.66 GHz 4 16 32 162,900 SPARC T3-4 SPARC T3, 1.65 GHz 4 64 512 80,400 TimesTen Performance Throughput Benchmark (TPTBM) Read-Only System Processor Sockets/Cores/Threads Tps SPARC T3-4 SPARC T3, 1.65 GHz 4 64 512 7.9M SPARC T4-2 SPARC T4, 2.85 GHz 2 16 128 6.5M M4000 SPARC64 VII+, 2.66 GHz 4 16 32 3.1M T5440 SPARC T2+, 1.4 GHz 4 32 256 3.1M TimesTen Performance Throughput Benchmark (TPTBM) Update-Only System Processor Sockets/Cores/Threads Tps SPARC T4-2 SPARC T4, 2.85 GHz 2 16 128 547,800 M4000 SPARC64 VII+, 2.66 GHz 4 16 32 363,800 SPARC T3-4 SPARC T3, 1.65 GHz 4 64 512 240,500 TimesTen Replication Tests System Processor Sockets/Cores/Threads Asynchronous 2-Safe SPARC T4-2 SPARC T4, 2.85 GHz 2 16 128 38,024 13,701 SPARC T5440 SPARC T2+, 1.4 GHz 4 32 256 11,621 4,615 Configuration Summary Hardware Configurations: SPARC T4-2 server 2 x SPARC T4 processors, 2.85 GHz 256 GB memory 1 x 8 Gbs FC Qlogic HBA 1 x 6 Gbs SAS HBA 4 x 300 GB internal disks Sun Storage F5100 Flash Array (40 x 24 GB flash modules) 1 x Sun Fire X4275 server configured as COMSTAR head SPARC T3-4 server 4 x SPARC T3 processors, 1.6 GHz 512 GB memory 1 x 8 Gbs FC Qlogic HBA 8 x 146 GB internal disks 1 x Sun Fire X4275 server configured as COMSTAR head SPARC Enterprise M4000 server 4 x SPARC64 VII+ processors, 2.66 GHz 128 GB memory 1 x 8 Gbs FC Qlogic HBA 1 x 6 Gbs SAS HBA 2 x 146 GB internal disks Sun Storage F5100 Flash Array (40 x 24 GB flash modules) 1 x Sun Fire X4275 server configured as COMSTAR head Software Configuration: Oracle Solaris 11 11/11 Oracle TimesTen 11.2.2.4 Benchmark Descriptions TimesTen Performance Throughput BenchMark (TPTBM) is shipped with TimesTen and measures the total throughput of the system. The workload can test read-only, update-only, delete and insert operations as required. Mobile Call Processing is a customer-based workload for processing calls made by mobile phone subscribers. The workload has a mixture of read-only, update, and insert-only transactions. The peak throughput performance is measured from multiple concurrent processes executing the transactions until a peak performance is reached via saturation of the available resources. Parallel Replication tests using both asynchronous and 2-Safe replication methods. For asynchronous replication, transactions are processed in batches to maximize the throughput capabilities of the replication server and network. In 2-Safe replication, also known as no data-loss or high availability, transactions are replicated between servers immediately emphasizing low latency. For both environments, performance is measured in the number of parallel replication servers and the maximum transactions-per-second for all concurrent processes. See Also SPARC T4-2 Server oracle.com OTN Oracle TimesTen In-Memory Database oracle.com OTN Oracle Solaris oracle.com OTN Oracle Database 11g Release 2 Enterprise Edition oracle.com OTN Disclosure Statement Copyright 2012, Oracle and/or its affiliates. All rights reserved. Oracle and Java are registered trademarks of Oracle and/or its affiliates. Other names may be trademarks of their respective owners. Results as of 1 October 2012.

  Read the article

• Drawing transparent glyphs on the HTML canvas

  - by Bertrand Le Roy

  The HTML canvas has a set of methods, createImageData and putImageData, that look like they will enable you to draw transparent shapes pixel by pixel. The data structures that you manipulate with these methods are pseudo-arrays of pixels, with four bytes per pixel. One byte for red, one for green, one for blue and one for alpha. This alpha byte makes one believe that you are going to be able to manage transparency, but that’s a lie. Here is a little script that attempts to overlay a simple generated pattern on top of a uniform background: var wrong = document.getElementById("wrong").getContext("2d"); wrong.fillStyle = "#ffd42a"; wrong.fillRect(0, 0, 64, 64); var overlay = wrong.createImageData(32, 32), data = overlay.data; fill(data); wrong.putImageData(overlay, 16, 16); .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } where the fill method is setting the pixels in the lower-left half of the overlay to opaque red, and the rest to transparent black. And here’s how it renders: As you can see, the transparency byte was completely ignored. Or was it? in fact, what happens is more subtle. What happens is that the pixels from the image data, including their alpha byte, replaced the existing pixels of the canvas. So the alpha byte is not lost, it’s just that it wasn’t used by putImageData to combine the new pixels with the existing ones. This is in fact a clue to how to write a putImageData that works: we can first dump that image data into an intermediary canvas, and then compose that temporary canvas onto our main canvas. The method that we can use for this composition is drawImage, which works not only with image objects, but also with canvas objects. var right = document.getElementById("right").getContext("2d"); right.fillStyle = "#ffd42a"; right.fillRect(0, 0, 64, 64); var overlay = wrong.createImageData(32, 32), data = overlay.data; fill(data); var overlayCanvas = document.createElement("canvas"); overlayCanvas.width = overlayCanvas.height = 32; overlayCanvas.getContext("2d").putImageData(overlay, 0, 0); right.drawImage(overlayCanvas, 16, 16); And there is is, a version of putImageData that works like it should always have:

  Read the article

• No Wireless Networks, BCM4313 [duplicate]

  - by TalonPlz

  This question already has an answer here: How to Install Broadcom Wireless Drivers (BCM43xx) 38 answers Just bought this little Asus 10 inch laptop that came with Ubuntu 12.04. Everything at my home was fine: Wireless identified and connected. As soon as I went to my girlfriend's house the trouble started. I couldn't connect to wireless (authentication... times out and asks for authentication) I started doing internet searching, tried a few solutions posted on line using terminal commands. No solutions. I decided to upgraded to 12.10-13.04 and that left me with a worse problem: I can no longer see ANY networks what so ever. Wireless card is ON, with out a doubt. Wired connection works. I have been fumbling with driver versions to no .avail, and have no idea which driver I am currently running I have a vague idea of what terminal lines to run: lshw: resources: irq:17 memory:f7d00000-f7dfffff *-network description: Wireless interface product: BCM4313 802.11b/g/n Wireless LAN Controller vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:02:00.0 logical name: eth2 version: 01 serial: dc:85:de:56:c4:ea width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=wl0 driverversion=6.20.155.1 (r326264) latency=0 multicast=yes wireless=IEEE 802.11abg resources: irq:17 memory:f7d00000-f7d03fff iwconfig: eth1 no wireless extensions. eth2 IEEE 802.11abg ESSID:off/any Mode:Managed Access Point: Not-Associated Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off lo no wireless extensions. I am new and excited to start my Ubuntu and Linux life and this is only the first of my few hic cups i am sure! :) Thanks all UPDATE: Report from 2nd answer talon@Black1015E:~$ sudo apt-get remove --purge bcmwl-kernel-source [sudo] password for talon: Reading package lists... Done Building dependency tree Reading state information... Done Package 'bcmwl-kernel-source' is not installed, so not removed 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. talon@Black1015E:~$ wget http://us.archive.ubuntu.com/ubuntu/pool/restricted/b/bcmwl/bcmwl-kernel-source_5.100.82.112+bdcom-0ubuntu3_amd64.deb --2013-10-22 18:50:32-- http://us.archive.ubuntu.com/ubuntu/pool/restricted/b/bcmwl/bcmwl-kernel-source_5.100.82.112+bdcom-0ubuntu3_amd64.deb Resolving us.archive.ubuntu.com (us.archive.ubuntu.com)... 2001:67c:1562::15, 2001:67c:1562::13, 2001:67c:1562::14, ... Connecting to us.archive.ubuntu.com (us.archive.ubuntu.com)|2001:67c:1562::15|:80... connected. HTTP request sent, awaiting response... 200 OK Length: 1181334 (1.1M) [application/x-debian-package] Saving to: ‘bcmwl-kernel-source_5.100.82.112+bdcom-0ubuntu3_amd64.deb’ 100%[======================================>] 1,181,334 3.37MB/s in 0.3s 2013-10-22 18:50:33 (3.37 MB/s) - ‘bcmwl-kernel-source_5.100.82.112+bdcom-0ubuntu3_amd64.deb’ saved [1181334/1181334] talon@Black1015E:~$ arvh No command 'arvh' found, did you mean: Command 'arch' from package 'coreutils' (main) arvh: command not found talon@Black1015E:~$ arch x86_64 talon@Black1015E:~$ sudo dpkg -i bcmwl*.deb Selecting previously unselected package bcmwl-kernel-source. (Reading database ... 171895 files and directories currently installed.) Unpacking bcmwl-kernel-source (from bcmwl-kernel-source_5.100.82.112+bdcom-0ubuntu3_amd64.deb) ... Setting up bcmwl-kernel-source (5.100.82.112+bdcom-0ubuntu3) ... Loading new bcmwl-5.100.82.112+bdcom DKMS files... First Installation: checking all kernels... Building only for 3.8.0-32-generic Building for architecture x86_64 Building initial module for 3.8.0-32-generic Done. wl: Running module version sanity check. - Original module - No original module exists within this kernel - Installation - Installing to /lib/modules/3.8.0-32-generic/updates/dkms/ depmod........ DKMS: install completed. Error: Module b43 is not currently loaded Error: Module b43legacy is not currently loaded Error: Module ssb is not currently loaded Error: Module bcm43xx is not currently loaded Error: Module brcm80211 is not currently loaded Error: Module brcmfmac is not currently loaded update-initramfs: deferring update (trigger activated) Processing triggers for initramfs-tools ... update-initramfs: Generating /boot/initrd.img-3.8.0-32-generic rebooting now

  Read the article

• Python Memory leak - Solved, but still puzzled

  - by disappearedng

  Dear everyone, I have successfully debugged my own memory leak problems. However, I have noticed some very strange occurence. for fid, fv in freqDic.iteritems(): outf.write(fid+"\t") #ID for i, term in enumerate(domain): #Vector tfidf = self.tf(term, fv) * self.idf( term, docFreqDic) if i == len(domain) - 1: outf.write("%f\n" % tfidf) else: outf.write("%f\t" % tfidf) outf.flush() print "Memory increased by", int(self.memory_mon.usage()) - startMemory outf.close() def tf(self, term, freqVector): total = freqVector[TOTAL] if total == 0: return 0 if term not in freqVector: ## When you don't have these lines memory leaks occurs return 0 ## return float(freqVector[term]) / freqVector[TOTAL] def idf(self, term, docFrequencyPerTerm): if term not in docFrequencyPerTerm: return 0 return math.log( float(docFrequencyPerTerm[TOTAL])/docFrequencyPerTerm[term]) Basically let me describe my problem: 1) I am doing tfidf calculations 2) I traced that the source of memory leaks is coming from defaultdict. 3) I am using the memory_mon from http://stackoverflow.com/questions/276052/how-to-get-current-cpu-and-ram-usage-in-python 4) The reason for my memory leaks is as follows: a) in self.tf, if the lines: if term not in freqVector: return 0 are not added that will cause the memory leak. (I verified this myself using memory_mon and noticed a sharp increase in memory that kept on increasing) The solution to my problem was 1) since fv is a defaultdict, any reference to it that are not found in fv will create an entry. Over a very large domain, this will cause memory leaks. I decided to use dict instead of default dict and the memory problem did go away. My only puzzle is: since fv is created in "for fid, fv in freqDic.iteritems():" shouldn't fv be destroyed at the end of every for loop? I tried putting gc.collect() at the end of the for loop but gc was not able to collect everything (returns 0). Yes, the hypothesis is right, but the memory should stay fairly consistent with ever for loop if for loops do destroy all temp variables. This is what it looks like with that two line in self.tf: Memory increased by 12 Memory increased by 948 Memory increased by 28 Memory increased by 36 Memory increased by 36 Memory increased by 32 Memory increased by 28 Memory increased by 32 Memory increased by 32 Memory increased by 32 Memory increased by 40 Memory increased by 32 Memory increased by 32 Memory increased by 28 and without the the two line: Memory increased by 1652 Memory increased by 3576 Memory increased by 4220 Memory increased by 5760 Memory increased by 7296 Memory increased by 8840 Memory increased by 10456 Memory increased by 12824 Memory increased by 13460 Memory increased by 15000 Memory increased by 17448 Memory increased by 18084 Memory increased by 19628 Memory increased by 22080 Memory increased by 22708 Memory increased by 24248 Memory increased by 26704 Memory increased by 27332 Memory increased by 28864 Memory increased by 30404 Memory increased by 32856 Memory increased by 33552 Memory increased by 35024 Memory increased by 36564 Memory increased by 39016 Memory increased by 39924 Memory increased by 42104 Memory increased by 42724 Memory increased by 44268 Memory increased by 46720 Memory increased by 47352 Memory increased by 48952 Memory increased by 50428 Memory increased by 51964 Memory increased by 53508 Memory increased by 55960 Memory increased by 56584 Memory increased by 58404 Memory increased by 59668 Memory increased by 61208 Memory increased by 62744 Memory increased by 64400 I look forward to your answer

  Read the article

• How do I read 64-bit Registry values from VBScript running as a an msi post-installation task?

  - by Joergen Bech

  I need to read the location of the Temporary ASP.NET Files folder from VBScript as part of a post-installation task in an installer created using a Visual Studio 2008 deployment project. I thought I would do something like this: Set oShell = CreateObject("Wscript.Shell") strPath = oShell.RegRead("HKLM\SOFTWARE\Microsoft\ASP.NET\2.0.50727.0\Path") and then concatenate strPath with "\Temporary ASP.NET Files" and be done with it. On an x64 system, however, I am getting the value from the WOW6432Node (HKLM\SOFTWARE\Wow6432Node\Microsoft\ASP.NET\2.0.50727.0), which gives me the 32-bit framework path (C:\Windows\Microsoft.NET\Framework\v2.0.50727), but on an x64 system, I actually want the 64-bit path, i.e. C:\Windows\Microsoft.NET\Framework64\v2.0.50727. I understand that this happens because the .vbs file is run using the 32-bit script host due to the parent process (the installer) being 32-bit itself. How can I run the script using the 64-bit script host - or - how can I read the 64-bit values even if the script is run using the 32-bit script host?

  Read the article

• Easiest way to open chm files programmatically?

  - by Adrian Grigore

  Hi, I have a legacy 32-bit application written in Borland's C++ Builder. I need to show specific pages from within a HtmlHelp file programmatically. Until now I've been doing this via HtmlHelp.ocx, but this does not work on x64 versions of Windows Vista / Windows7 as described in this thread. I can't compile the application as 64-bit executable. Therefore the only workaround I have found so far is to create a 32-bit component implementing a COM object which loads and calls into the 32-bit DLL, and exposes the 32-bit DLL interface as a COM interface. That sounds far too complicated just to display a chml file with a specific topic. There must be something else. But what is it?

  Read the article

• JPA entities -- org.hibernate.TypeMismatchException

  - by shane lee

  Environment: JDK 1.6, JEE5 Hibernate Core 3.3.1.GA, Hibernate Annotations 3.4.0.GA DB:Informix Used reverse engineering to create my persistence entities from db schema [NB:This is a schema in work i cannot change] Getting exception when selecting list of basic_auth_accounts org.hibernate.TypeMismatchException: Provided id of the wrong type for class ebusiness.weblogic.model.UserAccounts. Expected: class ebusiness.weblogic.model.UserAccountsId, got class ebusiness.weblogic.model.BasicAuthAccountsId Both basic_auth_accounts and user_accounts have composite primary keys and one-to-one relationships. Any clues what to do here? This is pretty important that i get this to work. Cannot find any substantial solution on the net, some say to create an ID class which hibernate has done, and some say not to have a one-to-one relationship. Please help me!! /** * BasicAuthAccounts generated by hbm2java */ @Entity @Table(name = "basic_auth_accounts", schema = "ebusdevt", catalog = "ebusiness_dev", uniqueConstraints = @UniqueConstraint(columnNames = { "realm_type_id", "realm_qualifier", "account_name" })) public class BasicAuthAccounts implements java.io.Serializable { private BasicAuthAccountsId id; private UserAccounts userAccounts; private String accountName; private String hashedPassword; private boolean passwdChangeReqd; private String hashMethodId; private int failedAttemptNo; private Date failedAttemptDate; private Date lastAccess; public BasicAuthAccounts() { } public BasicAuthAccounts(UserAccounts userAccounts, String accountName, String hashedPassword, boolean passwdChangeReqd, String hashMethodId, int failedAttemptNo) { this.userAccounts = userAccounts; this.accountName = accountName; this.hashedPassword = hashedPassword; this.passwdChangeReqd = passwdChangeReqd; this.hashMethodId = hashMethodId; this.failedAttemptNo = failedAttemptNo; } public BasicAuthAccounts(UserAccounts userAccounts, String accountName, String hashedPassword, boolean passwdChangeReqd, String hashMethodId, int failedAttemptNo, Date failedAttemptDate, Date lastAccess) { this.userAccounts = userAccounts; this.accountName = accountName; this.hashedPassword = hashedPassword; this.passwdChangeReqd = passwdChangeReqd; this.hashMethodId = hashMethodId; this.failedAttemptNo = failedAttemptNo; this.failedAttemptDate = failedAttemptDate; this.lastAccess = lastAccess; } @EmbeddedId @AttributeOverrides( { @AttributeOverride(name = "realmTypeId", column = @Column(name = "realm_type_id", nullable = false, length = 32)), @AttributeOverride(name = "realmQualifier", column = @Column(name = "realm_qualifier", nullable = false, length = 32)), @AttributeOverride(name = "accountId", column = @Column(name = "account_id", nullable = false)) }) public BasicAuthAccountsId getId() { return this.id; } public void setId(BasicAuthAccountsId id) { this.id = id; } @OneToOne(fetch = FetchType.LAZY) @PrimaryKeyJoinColumn @NotNull public UserAccounts getUserAccounts() { return this.userAccounts; } public void setUserAccounts(UserAccounts userAccounts) { this.userAccounts = userAccounts; } /** * BasicAuthAccountsId generated by hbm2java */ @Embeddable public class BasicAuthAccountsId implements java.io.Serializable { private String realmTypeId; private String realmQualifier; private long accountId; public BasicAuthAccountsId() { } public BasicAuthAccountsId(String realmTypeId, String realmQualifier, long accountId) { this.realmTypeId = realmTypeId; this.realmQualifier = realmQualifier; this.accountId = accountId; } /** * UserAccounts generated by hbm2java */ @Entity @Table(name = "user_accounts", schema = "ebusdevt", catalog = "ebusiness_dev") public class UserAccounts implements java.io.Serializable { private UserAccountsId id; private Realms realms; private UserDetails userDetails; private Integer accessLevel; private String status; private boolean isEdge; private String role; private boolean chargesAccess; private Date createdTimestamp; private Date lastStatusChangeTimestamp; private BasicAuthAccounts basicAuthAccounts; private Set<Sessions> sessionses = new HashSet<Sessions>(0); private Set<AccountGroups> accountGroupses = new HashSet<AccountGroups>(0); private Set<UserPrivileges> userPrivilegeses = new HashSet<UserPrivileges>(0); public UserAccounts() { } public UserAccounts(UserAccountsId id, Realms realms, UserDetails userDetails, String status, boolean isEdge, boolean chargesAccess) { this.id = id; this.realms = realms; this.userDetails = userDetails; this.status = status; this.isEdge = isEdge; this.chargesAccess = chargesAccess; } @EmbeddedId @AttributeOverrides( { @AttributeOverride(name = "realmTypeId", column = @Column(name = "realm_type_id", nullable = false, length = 32)), @AttributeOverride(name = "realmQualifier", column = @Column(name = "realm_qualifier", nullable = false, length = 32)), @AttributeOverride(name = "accountId", column = @Column(name = "account_id", nullable = false)) }) @NotNull public UserAccountsId getId() { return this.id; } public void setId(UserAccountsId id) { this.id = id; } @OneToOne(fetch = FetchType.LAZY, mappedBy = "userAccounts") public BasicAuthAccounts getBasicAuthAccounts() { return this.basicAuthAccounts; } public void setBasicAuthAccounts(BasicAuthAccounts basicAuthAccounts) { this.basicAuthAccounts = basicAuthAccounts; } /** * UserAccountsId generated by hbm2java */ @Embeddable public class UserAccountsId implements java.io.Serializable { private String realmTypeId; private String realmQualifier; private long accountId; public UserAccountsId() { } public UserAccountsId(String realmTypeId, String realmQualifier, long accountId) { this.realmTypeId = realmTypeId; this.realmQualifier = realmQualifier; this.accountId = accountId; } @Column(name = "realm_type_id", nullable = false, length = 32) @NotNull @Length(max = 32) public String getRealmTypeId() { return this.realmTypeId; } public void setRealmTypeId(String realmTypeId) { this.realmTypeId = realmTypeId; } @Column(name = "realm_qualifier", nullable = false, length = 32) @NotNull @Length(max = 32) public String getRealmQualifier() { return this.realmQualifier; } public void setRealmQualifier(String realmQualifier) { this.realmQualifier = realmQualifier; } @Column(name = "account_id", nullable = false) public long getAccountId() { return this.accountId; } public void setAccountId(long accountId) { this.accountId = accountId; } Main Code for classes are:

  Read the article

• Convert NSData to primitive variable with ieee-754 or twos-complement ?

  - by William GILLARD

  Hi every one. I am new programmer in Obj-C and cocoa. Im a trying to write a framework which will be used to read a binary files (Flexible Image Transport System or FITS binary files, usually used by astronomers). The binary data, that I am interested to extract, can have various formats and I get its properties by reading the header of the FITS file. Up to now, I manage to create a class to store the content of the FITS file and to isolate the header into a NSString object and the binary data into a NSData object. I also manage to write method which allow me to extract the key values from the header that are very valuable to interpret the binary data. I am now trying to convert the NSData object into a primitive array (array of double, int, short ...). But, here, I get stuck and would appreciate any help. According to the documentation I have about the FITS file, I have 5 possibilities to interpret the binary data depending on the value of the BITPIX key: BITPIX value | Data represented 8 | Char or unsigned binary int 16 | 16-bit two's complement binary integer 32 | 32-bit two's complement binary integer 64 | 64-bit two's complement binary integer -32 | IEEE single precision floating-point -64 | IEEE double precision floating-point I already write the peace of code, shown bellow, to try to convert the NSData into a primitive array. // self reefer to my FITS class which contain a NSString object // with the content of the header and a NSData object with the binary data. -(void*) GetArray { switch (BITPIX) { case 8: return [self GetArrayOfUInt]; break; case 16: return [self GetArrayOfInt]; break; case 32: return [self GetArrayOfLongInt]; break; case 64: return [self GetArrayOfLongLong]; break; case -32: return [self GetArrayOfFloat]; break; case -64: return [self GetArrayOfDouble]; break; default: return NULL; } } // then I show you the method to convert the NSData into a primitive array. // I restrict my example to the case of 'double'. Code is similar for other methods // just change double by 'unsigned int' (BITPIX 8), 'short' (BITPIX 16) // 'int' (BITPIX 32) 'long lon' (BITPIX 64), 'float' (BITPIX -32). -(double*) GetArrayOfDouble { int Nelements=[self NPIXEL]; // Metod to extract, from the header // the number of element into the array NSLog(@"TOTAL NUMBER OF ELEMENTS [%i]\n",Nelements); //CREATE THE ARRAY double (*array)[Nelements]; // Get the total number of bits in the binary data int Nbit = abs(BITPIX)*GCOUNT*(PCOUNT + Nelements); // GCOUNT and PCOUNT are defined // into the header NSLog(@"TOTAL NUMBER OF BIT [%i]\n",Nbit); int i=0; //FILL THE ARRAY double Value; for(int bit=0; bit < Nbit; bit+=sizeof(double)) { [Img getBytes:&Value range:NSMakeRange(bit,sizeof(double))]; NSLog(@"[%i]:(%u)%.8G\n",i,bit,Value); (*array)[i]=Value; i++; } return (*array); } However, the value I print in the loop are very different from the expected values (compared using official FITS software). Therefore, I think that the Obj-C double does not use the IEEE-754 convention as well as the Obj-C int are not twos-complement. I am really not familiar with this two convention (IEEE and twos-complement) and would like to know how I can do this conversion with Obj-C. In advance many thanks for any help or information.

  Read the article

• Handling mach exceptions in 64bit OS X application

  - by Brad S

  I have been able to register my own mach port to capture mach exceptions in my applications and it works beautifully when I target 32 bit. However when I target 64 bit, my exception handler catch_exception_raise() gets called but the array of exception codes that is passed to the handler are 32 bits wide. This is expected in a 32 bit build but not in 64 bit. In the case where I catch EXC_BAD_ACCESS the first code is the error number and the second code should be the address of the fault. Since the second code is 32 bits wide the high 32 bits of the 64 bit fault address is truncated. I found a flag in <mach/exception_types.h> I can pass in task_set_exception_ports() called MACH_EXCEPTION_CODES which from looking at the Darwin sources appears to control the size of the codes passed to the handler. It looks like it is meant to be ored with the behavior passed in to task_set_exception_ports(). However when I do this and trigger an exception, my mach port gets notified, I call exc_server() but my handler never gets called, and when the reply message is sent back to the kernel I get the default exception behavior. I am targeting the 10.6 SDK. I really wish apple would document this stuff better. Any one have any ideas?

  Read the article

• overriding enumeration base type using pragma or code change

  - by vprajan

  Problem: I am using a big C/C++ code base which works on gcc & visual studio compilers where enum base type is by default 32-bit(integer type). This code also has lots of inline + embedded assembly which treats enum as integer type and enum data is used as 32-bit flags in many cases. When compiled this code with realview ARM RVCT 2.2 compiler, we started getting many issues since realview compiler decides enum base type automatically based on the value an enum is set to. http://www.keil.com/support/man/docs/armccref/armccref_Babjddhe.htm For example, Consider the below enum, enum Scale { TimesOne, //0 TimesTwo, //1 TimesFour, //2 TimesEight, //3 }; This enum is used as a 32-bit flag. but compiler optimizes it to unsigned char type for this enum. Using --enum_is_int compiler option is not a good solution for our case, since it converts all the enum's to 32-bit which will break interaction with any external code compiled without --enum_is_int. This is warning i found in RVCT compilers & Library guide, The --enum_is_int option is not recommended for general use and is not required for ISO-compatible source. Code compiled with this option is not compliant with the ABI for the ARM Architecture (base standard) [BSABI], and incorrect use might result in a failure at runtime. This option is not supported by the C++ libraries. Question How to convert all enum's base type (by hand-coded changes) to use 32-bit without affecting value ordering? enum Scale { TimesOne=0x00000000, TimesTwo, // 0x00000001 TimesFour, // 0x00000002 TimesEight, //0x00000003 }; I tried the above change. But compiler optimizes this also for our bad luck. :( There is some syntax in .NET like enum Scale: int Is this a ISO C++ standard and ARM compiler lacks it? There is no #pragma to control this enum in ARM RVCT 2.2 compiler. Is there any hidden pragma available ?

  Read the article

• Refernce platform specific System.Data.SQLite

  - by Dmitriy Nagirnyak

  Hi, I am using SQLite for the unit testing and might use it as a database for local development/staging. The System.Data.SQLite has basically 2 versions: x86 and x64. Correct one should be used for the specific platform. I have 64 bit Win7, other guys in the team might use 32-bit OSs. The server's platform is not known at this stage. If I use 32-bit version of the assembly on 64-bit platform I get BadImageFormatException: Could not load file or assembly 'System.Data.SQLite'. I believe similar will happen trying to use 64-bit assembly on 32-bit platform. So my question is what is the best way to reference the SQLite assembly so that it does not depend on the platform and people can just use it? It is ok to use 32-bit version of assembly on a 64-bit platform (Maybe there is a switch for that somewhere?). Thanks, Dmitriy.

  Read the article

• How to response to full screen button in websites that has videos

  - by Pinhassi

  I use webview to play videos from varios sites, some of them have a full screen button I would like the webview to respond to the full screen button. If I set webSettings.setUseWideViewPort(false); then video get stuck when clicking the full screen button and I can see the following error on the logcat: 10-09 08:32:27.970: D/gralloc(31814): unmmap pid(1876), vaddr(0x589dc000) 10-09 08:32:27.970: E/gralloc(31814): [GR_MD] unmapping from 0x5786c000, size=33427456 10-09 08:32:27.970: D/gralloc(31814): unmmap pid(1876), vaddr(0x5a9fb000) 10-09 08:32:27.970: E/gralloc(31814): [GR_MD] unmapping from 0x5984d000, size=33427456 10-09 08:32:27.975: D/gralloc(31814): unmmap pid(1876), vaddr(0x5e616000) 10-09 08:32:27.975: E/gralloc(31814): [GR_MD] unmapping from 0x5d42a000, size=33427456 I'm using Android 4.0.1, here is my code: setWebViewSettings(mVideoWebView); String data_html = "<!DOCTYPE HTML> <html xmlns=\"http://www.w3.org/1999/xhtml\" xmlns:og=\"http://opengraphprotocol.org/schema/\" xmlns:fb=\"http://www.facebook.com/2008/fbml\"> <head></head> <body style=\"margin:0 0 0 0; padding:0 0 0 0;\"> <iframe src=\"http://www.dailymotion.com/embed/video/xu4vre\" width=\"300\" height=\"162"\" frameborder=\"0\"></iframe> </body> </html> "; mVideoWebView.loadData(data_html, "text/html", null); public static void setWebViewSettings(WebView webview) { WebSettings webSettings = webview.getSettings(); webSettings.setPluginState(PluginState.ON); webSettings.setJavaScriptEnabled(true); webSettings.setAllowFileAccess(true); webSettings.setLoadWithOverviewMode(false); // zoom y/n webSettings.setUseWideViewPort(true); // true = like desktop webSettings.setPluginsEnabled(true); //webSettings.setAllowContentAccess(true); webSettings.setAllowFileAccess(true); //webSettings.setAllowFileAccessFromFileURLs(true); //webSettings.setAllowUniversalAccessFromFileURLs(true); webSettings.setDatabaseEnabled(true); webSettings.setGeolocationEnabled(true); webSettings.setJavaScriptCanOpenWindowsAutomatically(true); webSettings.setDomStorageEnabled(true); }

  Read the article

• adv. styling list with css

  - by Ayrton

  Hi I need to style a regular html list like the following picture: as you see each each list item has a padding on the sides and a top&bottom border. When hovered the border has a width of 100% of the <ul> item. Now the problem actually is: when you give each <li> element a top & bottom border I have a border of 2 px between each element (bottom border from the first element and the top border from the second element), I don't want that however I do not know any solution for this. my html: <div id="tab_top" class="tab"> <div class="bottom"> <div class="cont"> <ul> <li><a href="#">Here’s a Sample Post <span class="ct">32</span></a></li> <li><a href="#">Here’s a Sample Post <span class="ct">32</span></a></li> <li><a href="#">Here’s a Sample Post <span class="ct">32</span></a></li> <li><a href="#">Here’s a Sample Post <span class="ct">32</span></a></li> <li><a href="#">Here’s a Sample Post <span class="ct">32</span></a></li> <li><a href="#">Here’s a Sample Post <span class="ct">32</span></a></li> <li><a href="#">Here’s a Sample Post <span class="ct">32</span></a></li> </ul> </div> </div> </div> my css: #tabs .tab div.cont ul li a{line-height:30px; height:30px; color:#3ca097; display:block; padding-left:11px; padding-right:13px; width:259px;} #tabs .tab div.cont ul li a span.ct{float:right;background:url(images/count_comments.gif) no-repeat left top; height:13px; padding-left:16px; margin-top:10px; line-height:12px;} #tabs .tab div.cont ul li a:hover{color:#fff; background-color:#6fd2c8; border-top:1px solid #7db9b2; border-bottom:1px solid #7db9b2; height:28px; line-height:28px;} #tabs .tab div.cont ul li a:hover span.ct{background-position:left bottom; color:#23665f; margin-top:9px;} I would be pleased if you can help me Yours truthfully

  Read the article

• GRUB-2 Bootloader fails to load for lack of floppy drive. Ubuntu 10.4 & Windows XP

  - by kammer

  2010.07.21 while trying to install Ubuntu 10.4 Hello all, I've been trying to install Ubuntu 10.04 on my Dell workstation and am unable to get the Grub-2 bootloader to load properly. It seems to be failing for lack of a floppy drive on the system resulting in an error message that reads : error: fd0 cannot get C/H/S values. I've gone through the Grub-2 page at https://help.ubuntu.com/community/Grub2 to no avail and other sources having similar problems have likewise turned up no solutions. I would certainly appreciate any insight, here's the background: A while back I was trying to install a different version of Linux and had the same problems, then had to set the project aside for a bit. I don't think this has anything to do with Linux or Ubuntu per se, but rather Grub. The system is an old (4-5 years) Dell workstation that has one drive (128 GB) set up for Windows XP and a second new drive (500GB) which I installed for Linux. There is a DVD/CD drive and the system contains no floppy drive at all. In one attempt to get this working I tried modifying the BIOS to indicate there was a floppy drive - this created a failure earlier in the chain with the BIOS failing to load properly, not unexpected, just a shot in the dark at that point. At the moment I am considering just running out to buy and install a cheap floppy drive to see if that helps. I'll never use the thing though so I'd rather find a solution that doesn't require me to spend money on useless hardware. In any case, here's the /boot/grub/grub.cfg contents: # # DO NOT EDIT THIS FILE # # It is automatically generated by /usr/sbin/grub-mkconfig using templates # from /etc/grub.d and settings from /etc/default/grub # ### BEGIN /etc/grub.d/00_header ### if [ -s $prefix/grubenv ]; then load_env fi set default="0" if [ ${prev_saved_entry} ]; then set saved_entry=${prev_saved_entry} save_env saved_entry set prev_saved_entry= save_env prev_saved_entry set boot_once=true fi function savedefault { if [ -z ${boot_once} ]; then saved_entry=${chosen} save_env saved_entry fi } function recordfail { set recordfail=1 if [ -n ${have_grubenv} ]; then if [ -z ${boot_once} ]; then save_env recordfail; fi; fi } insmod ext2 set root='(hd1,1)' search --no-floppy --fs-uuid --set fbebde47-f488-41b0-9480-337802ecb988 if loadfont /usr/share/grub/unicode.pf2 ; then set gfxmode=640x480 insmod gfxterm insmod vbe if terminal_output gfxterm ; then true ; else # For backward compatibility with versions of terminal.mod that don't # understand terminal_output terminal gfxterm fi fi insmod ext2 set root='(hd1,1)' search --no-floppy --fs-uuid --set fbebde47-f488-41b0-9480-337802ecb988 set locale_dir=($root)/boot/grub/locale set lang=en insmod gettext if [ ${recordfail} = 1 ]; then set timeout=-1 else set timeout=10 fi insmod play play 480 440 1 ### END /etc/grub.d/00_header ### ### BEGIN /etc/grub.d/05_debian_theme ### set menu_color_normal=white/black set menu_color_highlight=black/light-gray ### END /etc/grub.d/05_debian_theme ### ### BEGIN /etc/grub.d/10_linux ### menuentry 'Ubuntu, with Linux 2.6.32-21-generic' --class ubuntu --class gnu-linux --class gnu --class os { recordfail insmod ext2 set root='(hd1,1)' search --no-floppy --fs-uuid --set fbebde47-f488-41b0-9480-337802ecb988 linux /boot/vmlinuz-2.6.32-21-generic root=UUID=fbebde47-f488-41b0-9480-337802ecb988 ro quiet splash initrd /boot/initrd.img-2.6.32-21-generic } menuentry 'Ubuntu, with Linux 2.6.32-21-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os { recordfail insmod ext2 set root='(hd1,1)' search --no-floppy --fs-uuid --set fbebde47-f488-41b0-9480-337802ecb988 echo 'Loading Linux 2.6.32-21-generic ...' linux /boot/vmlinuz-2.6.32-21-generic root=UUID=fbebde47-f488-41b0-9480-337802ecb988 ro single echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-2.6.32-21-generic } ### END /etc/grub.d/10_linux ### ### BEGIN /etc/grub.d/20_memtest86+ ### menuentry "Memory test (memtest86+)" { insmod ext2 set root='(hd1,1)' search --no-floppy --fs-uuid --set fbebde47-f488-41b0-9480-337802ecb988 linux16 /boot/memtest86+.bin } menuentry "Memory test (memtest86+, serial console 115200)" { insmod ext2 set root='(hd1,1)' search --no-floppy --fs-uuid --set fbebde47-f488-41b0-9480-337802ecb988 linux16 /boot/memtest86+.bin console=ttyS0,115200n8 } ### END /etc/grub.d/20_memtest86+ ### ### BEGIN /etc/grub.d/30_os-prober ### menuentry "Microsoft Windows XP Home Edition (on /dev/sda1)" { insmod ntfs set root='(hd0,1)' search --no-floppy --fs-uuid --set 6ef0d4b4f0d4842d drivemap -s (hd0) ${root} chainloader +1 } ### END /etc/grub.d/30_os-prober ### ### BEGIN /etc/grub.d/40_custom ### # This file provides an easy way to add custom menu entries. Simply type the # menu entries you want to add after this comment. Be careful not to change # the 'exec tail' line above. ### END /etc/grub.d/40_custom ### Thoughts anyone? Thanks in advance.

  Read the article

• Change Pixel Format

  - by Bill Miller

  Can anyone advise how to change a bitmap from 32-bit BGR to 32-bit BGRA using TWICImage?

  Read the article

• How to make a memory dump in .net?

  - by SDReyes

  How do you obtain a memory dump from a given memory address in the format: Address | Hexadecimal representation | ASCII representation --------------------------------------------------------------------------------------- 0x637132687 | 00 00 00 00 00 00 00 00 45 21 65 78 32 F5 12 6C | ....... ahsnfdas 0x637132703 | 00 00 00 00 00 00 00 00 45 21 65 78 32 F5 12 6C | ....... ahsnfdas 0x637132719 | 00 00 00 00 00 00 00 00 45 21 65 78 32 F5 12 6C | ....... ahsnfdas 0x637132735 | 00 00 00 00 00 00 00 00 45 21 65 78 32 F5 12 6C | ....... ahsnfdas Do you know any API/framework/tool for the work?

  Read the article

• How to understand the output of gcc -S *.cpp?

  - by user198729

  A sample one as follows: .file "hw.cpp" .section .rdata,"dr" LC0: .ascii "Oh shit really bad~!\15\12\0" .text .align 2 .globl __Z3badv .def __Z3badv; .scl 2; .type 32; .endef __Z3badv: pushl %ebp movl %esp, %ebp subl $8, %esp movl $LC0, (%esp) call _printf leave ret .section .rdata,"dr" LC1: .ascii "WOW\0" .text .align 2 .globl __Z3foov .def __Z3foov; .scl 2; .type 32; .endef __Z3foov: pushl %ebp movl %esp, %ebp subl $4, %esp movl LC1, %eax movl %eax, -4(%ebp) movl $__Z3badv, 4(%ebp) leave ret .def ___main; .scl 2; .type 32; .endef .align 2 .globl _main .def _main; .scl 2; .type 32; .endef _main: pushl %ebp movl %esp, %ebp subl $8, %esp andl $-16, %esp movl $0, %eax addl $15, %eax addl $15, %eax shrl $4, %eax sall $4, %eax movl %eax, -4(%ebp) movl -4(%ebp), %eax call __alloca call ___main call __Z3foov movl $0, %eax leave ret .def _printf; .scl 2; .type 32; .endef Has anyone tried to understand it?

  Read the article

• ODBC Proxy for remotely accessing legacy resources?

  - by Winston Fassett

  Our project uses AcuCorp's AcuODBC driver to access a legacy Vision database. The problem is that we only have a 32-bit driver and the installer simply won't run on our 64-bit servers. I need a way to use SSIS to pull data from that system. As far as I can tell, there are 3 options: Set up a whole new SQL Server instance with SSIS and the AcuODBC drivers on a 32-bit VM (costly) Try to hack the 32-bit driver onto our 64-bit server manually (failure prone and unsupported) Set up a 32-bit VM with some sort of "proxy" service that our 64-bit SSIS can use to pull the data. The first option is the least desirable. If you have any suggestions for options 2 or 3, or anything else I haven't thought of, I'd love to hear them.

  Read the article

• Is this way of storing typed objects in memory good?

  - by Pindatjuh

  This is an "is this okay, or can it be done better" question. Topic: Storing typed objects in memory. Background information: I'm building a compiler for the x86-32 platform for my language. My goal includes typed objects. Idea: Every primitive is a semi-class (it can be used as if it was a normal class, but it's stored more compact). Every class is represented by primitives and some meta-data (containing class-properties, inheritance stuff, etc.). The meta-data is complex: it doesn't use fields but instead context-switches. For primitives, the meta-data is very small, compared to a "real" class, which is alot bigger. This enables another idea that "primitives are objects", in my language, which I found nessecairy. Example: If I have an array of 32 booleans, then the pure content of this array is exactly 4 byte (32 bits of booleans). The meta-data will contain flags that the type is an array of booleans, which contains 32 entries. The meta-data is very compacted, on bit-level: using a sort of "packing" mechanism, which is read by a FSM at runtime, when doing inspection of the type (like when passing the object to methods for checking, etc.) For instance (read from left to right, top to bottom, remember vertical possition when going to the right, and check nearest column header for meaning of switch): Primitive? Array? Type-Meta 1 Byte? || Size (1 byte) 1 1 [...] 1 [...] done 0 2 Bytes? || Size (2 bytes) 1 [...] done || Size (4 bytes) 0 [...] done Integer? 1 Byte? 2 Bytes? 0 1 0 1 done 1 done 0 done Boolean? Byte? 0 1 0 done 1 done More-Primitives 0 .... Class-Stuff (Huge) 0 ... (After reaching done the data is inserted. || = byte alignement. [...] is variable sized. ... is not described here, for simplicity. And let's call them cost-based-data-structures.) For an array of 32 booleans containing all true values, the memory for this type would be (read top-down): 1 Primitive 1 Array 1 ArrayType: Primitive 0 Not-Array 0 Not-Integer 1 Boolean 0 Not-Byte (thus bit) 1 Integer Size: 1 Byte 00100000 Array size 11111111 11111111 11111111 11111111 Data Thus, 8 bytes represent 32 booleans in an array: 11100101 00100000 11111111 11111111 11111111 11111111 Is this okay, or can it be done better?

  Read the article

• A question in java.lang.Integer internal code

  - by Daziplqa

  Hi folks, While looking in the code of the method: Integer.toHexString I found the following code : public static String toHexString(int i) { return toUnsignedString(i, 4); } private static String toUnsignedString(int i, int shift) { char[] buf = new char[32]; int charPos = 32; int radix = 1 << shift; int mask = radix - 1; do { buf[--charPos] = digits[i & mask]; i >>>= shift; } while (i != 0); return new String(buf, charPos, (32 - charPos)); } The question is, in toUnsignedString, why we create a char arr of 32 chars?

  Read the article

• "Nearly divisible"

  - by bobobobo

  I want to check if a floating point value is "nearly" a multiple of 32. E.g. 64.1 is "nearly" divisible by 32, and so is 63.9. Right now I'm doing this: #define NEARLY_DIVISIBLE 0.1f float offset = fmodf( val, 32.0f ) ; if( offset < NEARLY_DIVISIBLE ) { // its near from above } // if it was 63.9, then the remainder would be large, so add some then and check again else if( fmodf( val + 2*NEARLY_DIVISIBLE, 32.0f ) < NEARLY_DIVISIBLE ) { // its near from below } Got a better way to do this?

  Read the article

< Previous Page | 33 34 35 36 37 38 39 40 41 42 43 44  | Next Page >