state - Page 37 - Developer IT

List of all states from COMPOSITE_INSTANCE, CUBE_INSTANCE, DLV_MESSAGE tables

- by Deepak Arora

In many of my engagements I get asked repeatedly about the states of the composites in 11g and how to decipher them, especially when we are troubleshooting issues around purging. I have compiled a list of all the states from the COMPOSITE_INSTANCE, CUBE_INSTANCE, DLV_MESSAGE and MEDIATOR_INSTANCE tables. These are the primary tables that are used when using BPEL composites and how they are used with the ECID. Composite State Values COMPOSITE_INSTANCE States State Description 0 Running 1 Completed 2 Running with faults 3 Completed with faults 4 Running with recovery required 5 Completed with recovery required 6 Running with faults and recovery required 7 Completed with faults and recovery required 8 Running with suspended 9 Completed with suspended 10 Running with faults and suspended 11 Completed with faults and suspended 12 Running with recovery required and suspended 13 Completed with recovery required and suspended 14 Running with faults, recovery required, and suspended 15 Completed with faults, recovery required, and suspended 16 Running with terminated 17 Completed with terminated 18 Running with faults and terminated 19 Completed with faults and terminated 20 Running with recovery required and terminated 21 Completed with recovery required and terminated 22 Running with faults, recovery required, and terminated 23 Completed with faults, recovery required, and terminated 24 Running with suspended and terminated 25 Completed with suspended and terminated 26 Running with faulted, suspended, and terminated 27 Completed with faulted, suspended, and terminated 28 Running with recovery required, suspended, and terminated 29 Completed with recovery required, suspended, and terminated 30 Running with faulted, recovery required, suspended, and terminated 31 Completed with faulted, recovery required, suspended, and terminated 32 Unknown 64 - Normal 0 false false false EN-CA X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Any value in the range of 32 to 63 indicates that the composite instance state has not been enabled, but the instance state is updated for faults, aborts, etc. CUBE_INSTANCE States State Description 0 STATE_INITIATED 1 STATE_OPEN_RUNNING 2 STATE_OPEN_SUSPENDED 3 STATE_OPEN_FAULTED 4 STATE_CLOSED_PENDING_CANCEL 5 STATE_CLOSED_COMPLETED 6 STATE_CLOSED_FAULTED 7 STATE_CLOSED_CANCELLED 8 STATE_CLOSED_ABORTED 9 STATE_CLOSED_STALE 10 STATE_CLOSED_ROLLED_BACK DLV_MESSAGE States State Description 0 STATE_UNRESOLVED 1 STATE_RESOLVED 2 STATE_HANDLED 3 STATE_CANCELLED 4 STATE_MAX_RECOVERED Since now in 11g the Invoke_Messages table is not there so to distinguish between a new message (Invoke) and callback (DLV) and there is DLV_TYPE column that defines the type of message: DLV_TYPE States State Description 1 Invoke Message 2 DLV Message MEDIATOR_INSTANCE STATE Description 0 No faults but there still might be running instances 1 At least one case is aborted by user 2 At least one case is faulted (non-recoverable) 3 At least one case is faulted and one case is aborted 4 At least one case is in recovery required state 5 At least one case is in recovery required state and at least one is aborted 6 At least one case is in recovery required state and at least one is faulted 7 At least one case is in recovery required state, one faulted and one aborted >=8 and < 16 Running >= 16 Stale In my next blog posting I will walk through the lifecycle of a BPEL process using the above states for the following use cases: - New BPEL process - initial Receive activity - Callback BPEL process - mid-level Receive activity As always comments and questions welcome! Deepak

Read the article

Ubuntu-one syncs single files, but not directories [closed]

- by Luiz Cláudio Duarte

I'm using Ubuntu 10.10, fully updated. I have tried to sync my ~/Documents and ~/Pictures folders; U1 replicates the directory structure, but no files are uploaded. Next I tried to sync a single file inside ~/Ubuntu One and it was synced. Then I tried to put a directory inside ~/Ubuntu One and, again, the directory structure was replicated, but no files were synced. All the files have the "syncing" icon, however. The latest syncdaemon.log is below: 2011-03-30 07:41:50,752 - ubuntuone.SyncDaemon.fsm - INFO - loading updated metadata 2011-03-30 07:41:55,081 - ubuntuone.SyncDaemon.fsm - INFO - initialized: idx_path: 266, idx_node_id: 266, shares: 1 2011-03-30 07:41:55,082 - ubuntuone.SyncDaemon.GeneralINotProc - INFO - Ignoring files: ['\\A#.*\\Z', '\\A.*~\\Z', '\\A.*\\.py[oc]\\Z', '\\A.*\\.sw[nopx]\\Z', '\\A.*\\.swpx\\Z', '\\A\\..*\\.tmp\\Z'] 2011-03-30 07:41:55,083 - ubuntuone.SyncDaemon.HQ - INFO - HashQueue: _hasher started 2011-03-30 07:41:55,902 - ubuntuone.SyncDaemon.DBus - INFO - DBusInterface initialized. 2011-03-30 07:41:55,903 - ubuntuone.SyncDaemon.Main - INFO - Using '/home/l_claudius/Ubuntu One' as root dir 2011-03-30 07:41:55,903 - ubuntuone.SyncDaemon.Main - INFO - Using '/home/l_claudius/.local/share/ubuntuone/syncdaemon' as data dir 2011-03-30 07:41:55,903 - ubuntuone.SyncDaemon.Main - INFO - Using '/home/l_claudius/.local/share/ubuntuone/shares' as shares root dir 2011-03-30 07:41:55,903 - ubuntuone.SyncDaemon.Main - NOTE - ---- MARK (state: <State: 'INIT' (queues IDLE connection 'Not User Not Network')>; queues: metadata: 0; content: 0; hash: 0, fsm-cache: hit=1 miss=266) ---- 2011-03-30 07:41:55,904 - ubuntuone.SyncDaemon.Main - NOTE - Local rescan starting... 2011-03-30 07:41:55,904 - ubuntuone.SyncDaemon.local_rescan - INFO - start scan all volumes 2011-03-30 07:41:55,906 - ubuntuone.SyncDaemon.local_rescan - INFO - processing trash 2011-03-30 07:41:56,044 - ubuntuone.SyncDaemon.local_rescan - INFO - processing move limbo 2011-03-30 07:41:56,491 - ubuntuone.SyncDaemon.Main - NOTE - Local rescan finished! 2011-03-30 07:41:56,492 - ubuntuone.SyncDaemon.Main - INFO - hash queue empty. We are ready! 2011-03-30 07:42:15,583 - ubuntuone.SyncDaemon.DBus - INFO - u'CredentialsFound': callbacking with credentials (token_name: None). 2011-03-30 07:42:15,584 - ubuntuone.SyncDaemon.DBus - INFO - connect: credential request was successful, pushing SYS_USER_CONNECT. 2011-03-30 07:42:15,617 - ubuntuone.SyncDaemon.ActionQueue - INFO - Connection started to host fs-1.one.ubuntu.com, port 443. 2011-03-30 07:42:15,977 - ubuntuone.SyncDaemon.ActionQueue - INFO - Connection made. 2011-03-30 07:42:15,978 - ubuntuone.SyncDaemon.StorageClient - INFO - Connection made. 2011-03-30 07:42:16,581 - ubuntuone.SyncDaemon.ActionQueue - INFO - The request 'protocol_version' finished OK. 2011-03-30 07:42:16,774 - ubuntuone.SyncDaemon.ActionQueue - INFO - The request 'caps_raising_if_not_accepted' finished OK. 2011-03-30 07:42:16,966 - ubuntuone.SyncDaemon.ActionQueue - INFO - The request 'caps_raising_if_not_accepted' finished OK. 2011-03-30 07:42:17,722 - ubuntuone.SyncDaemon.ActionQueue - INFO - The request 'oauth_authenticate' finished OK. 2011-03-30 07:42:17,723 - ubuntuone.SyncDaemon.ActionQueue - NOTE - Session ID: '563bc960-35fa-4f44-b9b6-125819656dc3' 2011-03-30 07:42:19,258 - ubuntuone.SyncDaemon.ActionQueue - INFO - The request 'list_volumes' finished OK. 2011-03-30 07:43:55,903 - ubuntuone.SyncDaemon.Main - NOTE - ---- MARK (state: <State: 'QUEUE_MANAGER' (queues IDLE connection 'With User With Network')>; queues: metadata: 0; content: 0; hash: 0, fsm-cache: hit=1059 miss=266) ---- 2011-03-30 07:45:55,903 - ubuntuone.SyncDaemon.Main - NOTE - ---- MARK (state: <State: 'QUEUE_MANAGER' (queues IDLE connection 'With User With Network')>; queues: metadata: 0; content: 0; hash: 0, fsm-cache: hit=1059 miss=266) ---- 2011-03-30 07:47:55,903 - ubuntuone.SyncDaemon.Main - NOTE - ---- MARK (state: <State: 'QUEUE_MANAGER' (queues IDLE connection 'With User With Network')>; queues: metadata: 0; content: 0; hash: 0, fsm-cache: hit=1059 miss=266) ---- 2011-03-30 07:49:55,903 - ubuntuone.SyncDaemon.Main - NOTE - ---- MARK (state: <State: 'QUEUE_MANAGER' (queues IDLE connection 'With User With Network')>; queues: metadata: 0; content: 0; hash: 0, fsm-cache: hit=1059 miss=266) ---- 2011-03-30 07:51:55,903 - ubuntuone.SyncDaemon.Main - NOTE - ---- MARK (state: <State: 'QUEUE_MANAGER' (queues IDLE connection 'With User With Network')>; queues: metadata: 0; content: 0; hash: 0, fsm-cache: hit=1059 miss=266) ----

Read the article

SQL SERVER – ERROR – FIX – Msg 3702, Level 16, State 3, Line 1 Cannot drop database “MyDBName” because it is currently in use

- by pinaldave

I often go to do various seminars and presentations at various organizations. During presentations I often create and drop various databases for demonstrations purpose. Recently in one of the presentations, I tried to remove my recently created database, I got following error. Msg 3702, Level 16, State 3, Line 1 Cannot drop database “MyDBName” because it is currently in use. The reason was very simple as my database was in use by another session or window. I had option that I should go and find open session and close it right away; later followed by dropping the database. As I was in rush I quickly wrote down following code and I was able to successfully drop the database. USE MASTER GO ALTER DATABASE MyDBName SET SINGLE_USER WITH ROLLBACK IMMEDIATE; DROP DATABASE MyDBName GO Please note that I am doing all this on my demonstrations, do not run above code on production without proper approvals and supervisions. Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: SQL, SQL Authority, SQL Error Messages, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology

Read the article

VMware9 fails to launch Virtual OS. Ubuntu 12.10 64bit (Unable to change virtual machine power state: Pipe connection has been broken.)

- by pst007x

Another issue I need help with. I use VMware for work on Ubuntu 12.04. However for some reasons my VMware Workstation software generates the following error: Unable to change virtual machine power state: Failed to power on '/home/pst007x/vmware/Windows 7 x64/Windows 7 x64.vmx'. Transport (VMDB) error -14: Pipe connection has been broken. Product: VMware® Workstation Version: 9.0.0 build-812388 Host OS Version: 3.5.0-18-generic Ubuntu 12.10 64bit Kernel Linux 3.5.0-18-generic I have seen patches, but nothing works, and the patches are not maintained, broken links. PLEASE NOTE: I know that this has been asked, but there was no answer given that resolves this issue. Unfortunately I have changed all my office and personal PC's to Ubuntu, and use Win7 in a vm, however since 12.10, vm now fails to launch. For me this is a catastrophe, and makes Ubuntu useless for me to use! I am in a desperate situation here, is there is anyone that can offer any help I would be truly appreciative. I have looked on the VMware forums and the only solution is offered for Fedora, but the people posting there are not clear about what the solution is! thanks PLEASE DO NOT CLOSE THIS QUESTION! I have tried everywhere to find a solution, but I have come up blank... Patches referenced to in other posts do not work in this version of VMware...

Read the article

Why am I seeing so many instantiable classes without state?

- by futlib

I'm seeing a lot of instantiable classes in the C++ and Java world that don't have any state. I really can't figure out why people do that, they could just use a namespace with free functions in C++, or a class with a private constructor and only static methods in Java. The only benefit I can think of is that you don't have to change most of your code if you later decide that you want a different implementation in certain situations. But isn't that a case of premature design? It could be turned into a class later, when/if it becomes appropriate. Am I getting this wrong? Is it not OOP if I don't put everything into objects (i.e. instantiated classes)? Then why are there so many utility namespaces and classes in the standard libraries of C++ and Java? Update: I've certainly seen a lot examples of this in my previous jobs, but I'm struggling to find open source examples, so maybe it's not that common after all. Still, I'm wondering why people do it, and how common it is.

Read the article

What is the Pythonic way to implement a simple FSM?

- by Vicky

Yesterday I had to parse a very simple binary data file - the rule is, look for two bytes in a row that are both 0xAA, then the next byte will be a length byte, then skip 9 bytes and output the given amount of data from there. Repeat to the end of the file. My solution did work, and was very quick to put together (even though I am a C programmer at heart, I still think it was quicker for me to write this in Python than it would have been in C) - BUT, it is clearly not at all Pythonic and it reads like a C program (and not a very good one at that!) What would be a better / more Pythonic approach to this? Is a simple FSM like this even still the right choice in Python? My solution: #! /usr/bin/python import sys f = open(sys.argv[1], "rb") state = 0 if f: for byte in f.read(): a = ord(byte) if state == 0: if a == 0xAA: state = 1 elif state == 1: if a == 0xAA: state = 2 else: state = 0 elif state == 2: count = a; skip = 9 state = 3 elif state == 3: skip = skip -1 if skip == 0: state = 4 elif state == 4: print "%02x" %a count = count -1 if count == 0: state = 0 print "\r\n"

Read the article

Why does Google Chrome ignore "last_known_google_url" property in "Local State" file?

- by Peter Sivák

I want to force my Google Chrome web browser (version 21.0.1180.89, 64-bit) to use non-localized search (thus google in english) through address bar, using the default Google search engine. To achieve that, I have to change value of the property last_known_google_url to https://www.google.com/?hl=en& in Local State file (for instance on Linux, the full path to the file is ~/.config/google-chrome/Local State). In that file, there should be the property: "browser": { "last_known_google_url": but it is not. Even if I add there the property, it has no impact on search - Google Chrome does not use the property and still searches in localized version. Another option is to put the property to Preferences file (for instance on Linux, the full path to the file is ~/.config/google-chrome/Default/Preferences) - which works perfectly when I start Google Chrome and do some search - but just after that, the property (actually the whole Preferences file) is overriden, so "the most important" trailing part ?hl=en& of the property value is removed - and without it, the non-localized search does not work anymore. Why does Google Chrome ignore last_known_google_url property in Local State file?

Read the article

On configuring GC 10.2.0.5 to monitor LISTENER SCAN using UDMs ...

- by [email protected]

Hi,Looks like Grid Control 10.2.0.5 is not fully prepared for monitoringthe Grid Infrastructure (11gR2).Even I'm pretty sure the upcoming version of GC (11g) will of course support all the new features of 11gR2, some customersare asking for some "hand-made" procedures for monitoring all the new stuff.I think one of the most critical components that cant be monitored are the LISTENER SCAN, so I have developed a little script for doing sousing the GC User Defined Metrics ( at host level )I am more than happy to share with you:#!/bin/ksh ### NAME### monitor_scan.sh###### DESCRIPTION### SCAN Listener monitoring###### RETURNS###### NOTES###### MODIFIED (DD/MM/YY)### Oracle 25/03/10 - Creation###export ORACLE_HOME=/opt/oracle/soft/11.2/gridRSC_KEY=$1AWK=/sbin/awk LISTENER_DOWN_COUNT=$(${ORACLE_HOME}/bin/crsctl status resource -w 'TYPE = ora.scan_listener.type' | grep OFFLINE | wc -l)if [ ${LISTENER_DOWN_COUNT} != 0 ]; then SCAN_DOWN_LIST=$(${ORACLE_HOME}/bin/crsctl status resource -w 'TYPE = ora.scan_listener.type' | $AWK \ 'BEGIN { FS="="; state = 0; } $1~/NAME/ && $2~/'$RSC_KEY'/ {appname = $2; state=1}; state == 0 {next;} $1~/TARGET/ && state == 1 {apptarget = $2; state=2;} $1~/STATE/ && state == 2 {appstate = $2; state=3;} state == 3 {printf "%-45s %-10s %-18s\n", appname, apptarget, appstate; state=0;}' | grep OFFLINE | awk '{ print $1 }') echo em_result=ALERT echo em_message=There are LISTENER SCAN with down status: [${SCAN_DOWN_LIST}]else echo em_result=NORMAL echo em_message=All SCAN Listener are UPfiHope it helpsL

Read the article

List of all states from COMPOSITE_INSTANCE, CUBE_INSTANCE, DLV_MESSAGE tables

- by Deepak Arora

In many of my engagements I get asked repeatedly about the states of the composites in 11g and how to decipher them, especially when we are troubleshooting issues around purging. I have compiled a list of all the states from the COMPOSITE_INSTANCE, CUBE_INSTANCE, and DLV_MESSAGE tables. These are the primary tables that are used when using BPEL composites and how they are used with the ECID. Composite State Values COMPOSITE_INSTANCE States State Description 0 Running 1 Completed 2 Running with faults 3 Completed with faults 4 Running with recovery required 5 Completed with recovery required 6 Running with faults and recovery required 7 Completed with faults and recovery required 8 Running with suspended 9 Completed with suspended 10 Running with faults and suspended 11 Completed with faults and suspended 12 Running with recovery required and suspended 13 Completed with recovery required and suspended 14 Running with faults, recovery required, and suspended 15 Completed with faults, recovery required, and suspended 16 Running with terminated 17 Completed with terminated 18 Running with faults and terminated 19 Completed with faults and terminated 20 Running with recovery required and terminated 21 Completed with recovery required and terminated 22 Running with faults, recovery required, and terminated 23 Completed with faults, recovery required, and terminated 24 Running with suspended and terminated 25 Completed with suspended and terminated 26 Running with faulted, suspended, and terminated 27 Completed with faulted, suspended, and terminated 28 Running with recovery required, suspended, and terminated 29 Completed with recovery required, suspended, and terminated 30 Running with faulted, recovery required, suspended, and terminated 31 Completed with faulted, recovery required, suspended, and terminated 32 Unknown 64 - CUBE_INSTANCE States State Description 0 STATE_INITIATED 1 STATE_OPEN_RUNNING 2 STATE_OPEN_SUSPENDED 3 STATE_OPEN_FAULTED 4 STATE_CLOSED_PENDING_CANCEL 5 STATE_CLOSED_COMPLETED 6 STATE_CLOSED_FAULTED 7 STATE_CLOSED_CANCELLED 8 STATE_CLOSED_ABORTED 9 STATE_CLOSED_STALE 10 STATE_CLOSED_ROLLED_BACK DLV_MESSAGE States State Description 0 STATE_UNRESOLVED 1 STATE_RESOLVED 2 STATE_HANDLED 3 STATE_CANCELLED 4 STATE_MAX_RECOVERED Since now in 11g the Invoke_Messages table is not there so to distinguish between a new message (Invoke) and callback (DLV) and there is DLV_TYPE column that defines the type of message: DLV_TYPE States State Description 1 Invoke Message 2 DLV Message MEDIATOR_INSTANCE STATE Description 0 No faults but there still might be running instances 1 At least one case is aborted by user 2 At least one case is faulted (non-recoverable) 3 At least one case is faulted and one case is aborted 4 At least one case is in recovery required state 5 At least one case is in recovery required state and at least one is aborted 6 At least one case is in recovery required state and at least one is faulted 7 At least one case is in recovery required state, one faulted and one aborted >=8 and < 16 Running >= 16 Stale In my next blog posting I will walk through the lifecycle of a BPEL process using the above states for the following use cases: - New BPEL process - initial Receive activity - Callback BPEL process - mid-level Receive activity As always comments and questions welcome! Deepak

Read the article

Frequent Disconnects ubuntu desktop 12.10 x64 intel 82579V e1000e

- by user112055

I'm having frequent disconnects with my new install of Ubuntu 12.10. I tried updating the kernel driver to the latest intel release to no avail. My expertise is spent. It happens anywhere between 1 min and 10 min. Any ideas? syslog: Dec 1 13:51:39 andromeda kernel: [ 972.188809] audit_printk_skb: 6 callbacks suppressed Dec 1 13:51:39 andromeda kernel: [ 972.188813] type=1701 audit(1354398699.418:199): auid=4294967295 uid=1000 gid=1000 ses=4294967295 pid=6039 comm="chrome" reason="seccomp" sig=0 syscall=4 compat=0 ip=0x7f26777d9205 code=0x50000 Dec 1 13:51:39 andromeda kernel: [ 972.188817] type=1701 audit(1354398699.418:200): auid=4294967295 uid=1000 gid=1000 ses=4294967295 pid=6039 comm="chrome" reason="seccomp" sig=0 syscall=4 compat=0 ip=0x7f26777d9205 code=0x50000 Dec 1 13:51:39 andromeda kernel: [ 972.188820] type=1701 audit(1354398699.418:201): auid=4294967295 uid=1000 gid=1000 ses=4294967295 pid=6039 comm="chrome" reason="seccomp" sig=0 syscall=4 compat=0 ip=0x7f26777d9205 code=0x50000 Dec 1 13:51:39 andromeda kernel: [ 972.188823] type=1701 audit(1354398699.418:202): auid=4294967295 uid=1000 gid=1000 ses=4294967295 pid=6039 comm="chrome" reason="seccomp" sig=0 syscall=4 compat=0 ip=0x7f26777d9205 code=0x50000 Dec 1 13:51:39 andromeda kernel: [ 972.188825] type=1701 audit(1354398699.418:203): auid=4294967295 uid=1000 gid=1000 ses=4294967295 pid=6039 comm="chrome" reason="seccomp" sig=0 syscall=4 compat=0 ip=0x7f26777d9205 code=0x50000 Dec 1 13:51:39 andromeda kernel: [ 972.331419] type=1701 audit(1354398699.558:204): auid=4294967295 uid=1000 gid=1000 ses=4294967295 pid=6039 comm="chrome" reason="seccomp" sig=0 syscall=2 compat=0 ip=0x7f26777d96b0 code=0x50000 Dec 1 13:53:12 andromeda NetworkManager[1115]: <info> (eth0): carrier now OFF (device state 100, deferring action for 4 seconds) Dec 1 13:53:12 andromeda kernel: [ 1064.894387] e1000e: e1000e: eth0 NIC Link is Down Dec 1 13:53:16 andromeda NetworkManager[1115]: <info> (eth0): device state change: activated -> unavailable (reason 'carrier-changed') [100 20 40] Dec 1 13:53:16 andromeda NetworkManager[1115]: <info> (eth0): deactivating device (reason 'carrier-changed') [40] Dec 1 13:53:16 andromeda NetworkManager[1115]: <info> (eth0): canceled DHCP transaction, DHCP client pid 5946 Dec 1 13:53:16 andromeda avahi-daemon[890]: Withdrawing address record for fe80::ea40:f2ff:fee2:4d86 on eth0. Dec 1 13:53:16 andromeda avahi-daemon[890]: Leaving mDNS multicast group on interface eth0.IPv6 with address fe80::ea40:f2ff:fee2:4d86. Dec 1 13:53:16 andromeda avahi-daemon[890]: Interface eth0.IPv6 no longer relevant for mDNS. Dec 1 13:53:16 andromeda kernel: [ 1069.025288] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready Dec 1 13:53:16 andromeda avahi-daemon[890]: Withdrawing address record for 192.168.11.17 on eth0. Dec 1 13:53:16 andromeda avahi-daemon[890]: Leaving mDNS multicast group on interface eth0.IPv4 with address 192.168.11.17. Dec 1 13:53:16 andromeda avahi-daemon[890]: Interface eth0.IPv4 no longer relevant for mDNS. Dec 1 13:53:16 andromeda NetworkManager[1115]: <warn> DNS: plugin dnsmasq update failed Dec 1 13:53:16 andromeda NetworkManager[1115]: <info> ((null)): removing resolv.conf from /sbin/resolvconf Dec 1 13:53:16 andromeda dnsmasq[1907]: setting upstream servers from DBus Dec 1 13:53:16 andromeda dbus[800]: [system] Activating service name='org.freedesktop.nm_dispatcher' (using servicehelper) Dec 1 13:53:16 andromeda dbus[800]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher' Dec 1 13:53:32 andromeda NetworkManager[1115]: <info> (eth0): carrier now ON (device state 20) Dec 1 13:53:32 andromeda NetworkManager[1115]: <info> (eth0): device state change: unavailable -> disconnected (reason 'carrier-changed') [20 30 40] Dec 1 13:53:32 andromeda NetworkManager[1115]: <info> Auto-activating connection '82579V'. Dec 1 13:53:32 andromeda NetworkManager[1115]: <info> Activation (eth0) starting connection '82579V' Dec 1 13:53:32 andromeda NetworkManager[1115]: <info> (eth0): device state change: disconnected -> prepare (reason 'none') [30 40 0] Dec 1 13:53:32 andromeda NetworkManager[1115]: <info> Activation (eth0) Stage 1 of 5 (Device Prepare) scheduled... Dec 1 13:53:32 andromeda NetworkManager[1115]: <info> Activation (eth0) Stage 1 of 5 (Device Prepare) started... Dec 1 13:53:32 andromeda NetworkManager[1115]: <info> Activation (eth0) Stage 2 of 5 (Device Configure) scheduled... Dec 1 13:53:32 andromeda NetworkManager[1115]: <info> Activation (eth0) Stage 1 of 5 (Device Prepare) complete. Dec 1 13:53:32 andromeda NetworkManager[1115]: <info> Activation (eth0) Stage 2 of 5 (Device Configure) starting... Dec 1 13:53:32 andromeda NetworkManager[1115]: <info> (eth0): device state change: prepare -> config (reason 'none') [40 50 0] Dec 1 13:53:32 andromeda NetworkManager[1115]: <info> Activation (eth0) Stage 2 of 5 (Device Configure) successful. Dec 1 13:53:32 andromeda NetworkManager[1115]: <info> Activation (eth0) Stage 3 of 5 (IP Configure Start) scheduled. Dec 1 13:53:32 andromeda NetworkManager[1115]: <info> Activation (eth0) Stage 2 of 5 (Device Configure) complete. Dec 1 13:53:32 andromeda NetworkManager[1115]: <info> Activation (eth0) Stage 3 of 5 (IP Configure Start) started... Dec 1 13:53:32 andromeda NetworkManager[1115]: <info> (eth0): device state change: config -> ip-config (reason 'none') [50 70 0] Dec 1 13:53:32 andromeda NetworkManager[1115]: <info> Activation (eth0) Beginning DHCPv4 transaction (timeout in 45 seconds) Dec 1 13:53:32 andromeda kernel: [ 1084.938042] e1000e: e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx Dec 1 13:53:32 andromeda kernel: [ 1084.938049] e1000e 0000:00:19.0: eth0: 10/100 speed: disabling TSO Dec 1 13:53:32 andromeda kernel: [ 1084.938815] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready Dec 1 13:53:32 andromeda NetworkManager[1115]: <info> dhclient started with pid 6080 Dec 1 13:53:32 andromeda NetworkManager[1115]: <info> Activation (eth0) Stage 3 of 5 (IP Configure Start) complete. Dec 1 13:53:32 andromeda dhclient: Internet Systems Consortium DHCP Client 4.2.4 Dec 1 13:53:32 andromeda dhclient: Copyright 2004-2012 Internet Systems Consortium. Dec 1 13:53:32 andromeda dhclient: All rights reserved. Dec 1 13:53:32 andromeda dhclient: For info, please visit https://www.isc.org/software/dhcp/ Dec 1 13:53:32 andromeda dhclient: Dec 1 13:53:32 andromeda NetworkManager[1115]: <info> (eth0): DHCPv4 state changed nbi -> preinit Dec 1 13:53:32 andromeda dhclient: Listening on LPF/eth0/e8:40:f2:e2:4d:86 Dec 1 13:53:32 andromeda dhclient: Sending on LPF/eth0/e8:40:f2:e2:4d:86 Dec 1 13:53:32 andromeda dhclient: Sending on Socket/fallback Dec 1 13:53:32 andromeda dhclient: DHCPREQUEST of 192.168.11.17 on eth0 to 255.255.255.255 port 67 Dec 1 13:53:32 andromeda dhclient: DHCPACK of 192.168.11.17 from 192.168.11.1 Dec 1 13:53:32 andromeda dhclient: bound to 192.168.11.17 -- renewal in 33576 seconds. Dec 1 13:53:32 andromeda NetworkManager[1115]: <info> (eth0): DHCPv4 state changed preinit -> reboot Dec 1 13:53:32 andromeda NetworkManager[1115]: <info> address 192.168.11.17 Dec 1 13:53:32 andromeda NetworkManager[1115]: <info> prefix 24 (255.255.255.0) Dec 1 13:53:32 andromeda NetworkManager[1115]: <info> gateway 192.168.11.1 Dec 1 13:53:32 andromeda NetworkManager[1115]: <info> hostname 'andromeda' Dec 1 13:53:32 andromeda NetworkManager[1115]: <info> nameserver '192.168.11.1' Dec 1 13:53:32 andromeda NetworkManager[1115]: <info> domain name 'hsd1.ca.comcast.net' Dec 1 13:53:32 andromeda NetworkManager[1115]: <info> Activation (eth0) Stage 5 of 5 (IPv4 Configure Commit) scheduled... Dec 1 13:53:32 andromeda NetworkManager[1115]: <info> Activation (eth0) Stage 5 of 5 (IPv4 Commit) started... Dec 1 13:53:32 andromeda avahi-daemon[890]: Joining mDNS multicast group on interface eth0.IPv4 with address 192.168.11.17. Dec 1 13:53:32 andromeda avahi-daemon[890]: New relevant interface eth0.IPv4 for mDNS. Dec 1 13:53:32 andromeda avahi-daemon[890]: Registering new address record for 192.168.11.17 on eth0.IPv4. Dec 1 13:53:33 andromeda NetworkManager[1115]: <info> (eth0): device state change: ip-config -> activated (reason 'none') [70 100 0] Dec 1 13:53:33 andromeda NetworkManager[1115]: <info> ((null)): writing resolv.conf to /sbin/resolvconf Dec 1 13:53:33 andromeda dnsmasq[1907]: setting upstream servers from DBus Dec 1 13:53:33 andromeda dnsmasq[1907]: using nameserver 192.168.11.1#53 Dec 1 13:53:33 andromeda NetworkManager[1115]: <info> Policy set '82579V' (eth0) as default for IPv4 routing and DNS. Dec 1 13:53:33 andromeda NetworkManager[1115]: <info> Activation (eth0) successful, device activated. Dec 1 13:53:33 andromeda NetworkManager[1115]: <info> Activation (eth0) Stage 5 of 5 (IPv4 Commit) complete. Dec 1 13:53:33 andromeda dbus[800]: [system] Activating service name='org.freedesktop.nm_dispatcher' (using servicehelper) Dec 1 13:53:33 andromeda dbus[800]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher' Dec 1 13:53:33 andromeda avahi-daemon[890]: Joining mDNS multicast group on interface eth0.IPv6 with address fe80::ea40:f2ff:fee2:4d86. Dec 1 13:53:33 andromeda avahi-daemon[890]: New relevant interface eth0.IPv6 for mDNS. Dec 1 13:53:33 andromeda avahi-daemon[890]: Registering new address record for fe80::ea40:f2ff:fee2:4d86 on eth0.*. Dec 1 13:53:41 andromeda ntpdate[6154]: adjust time server 91.189.94.4 offset 0.000928 sec Dec 1 13:53:50 andromeda NetworkManager[1115]: <info> (eth0): carrier now OFF (device state 100, deferring action for 4 seconds) Dec 1 13:53:50 andromeda kernel: [ 1102.980003] e1000e: e1000e: eth0 NIC Link is Down Dec 1 13:53:54 andromeda NetworkManager[1115]: <info> (eth0): device state change: activated -> unavailable (reason 'carrier-changed') [100 20 40] Dec 1 13:53:54 andromeda NetworkManager[1115]: <info> (eth0): deactivating device (reason 'carrier-changed') [40] Dec 1 13:53:54 andromeda NetworkManager[1115]: <info> (eth0): canceled DHCP transaction, DHCP client pid 6080 Dec 1 13:53:54 andromeda avahi-daemon[890]: Withdrawing address record for fe80::ea40:f2ff:fee2:4d86 on eth0. Dec 1 13:53:54 andromeda avahi-daemon[890]: Leaving mDNS multicast group on interface eth0.IPv6 with address fe80::ea40:f2ff:fee2:4d86. Dec 1 13:53:54 andromeda avahi-daemon[890]: Interface eth0.IPv6 no longer relevant for mDNS. Dec 1 13:53:54 andromeda avahi-daemon[890]: Withdrawing address record for 192.168.11.17 on eth0. Dec 1 13:53:54 andromeda avahi-daemon[890]: Leaving mDNS multicast group on interface eth0.IPv4 with address 192.168.11.17. Dec 1 13:53:54 andromeda kernel: [ 1107.025959] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready Dec 1 13:53:54 andromeda NetworkManager[1115]: <warn> DNS: plugin dnsmasq update failed Dec 1 13:53:54 andromeda NetworkManager[1115]: <info> ((null)): removing resolv.conf from /sbin/resolvconf Dec 1 13:53:54 andromeda avahi-daemon[890]: Interface eth0.IPv4 no longer relevant for mDNS. Dec 1 13:53:54 andromeda dnsmasq[1907]: setting upstream servers from DBus Dec 1 13:53:54 andromeda dbus[800]: [system] Activating service name='org.freedesktop.nm_dispatcher' (using servicehelper) Dec 1 13:53:54 andromeda dbus[800]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher' Dec 1 13:54:10 andromeda NetworkManager[1115]: <info> (eth0): carrier now ON (device state 20) Dec 1 13:54:10 andromeda NetworkManager[1115]: <info> (eth0): device state change: unavailable -> disconnected (reason 'carrier-changed') [20 30 40] Dec 1 13:54:10 andromeda NetworkManager[1115]: <info> Auto-activating connection '82579V'. Dec 1 13:54:10 andromeda NetworkManager[1115]: <info> Activation (eth0) starting connection '82579V' Dec 1 13:54:10 andromeda NetworkManager[1115]: <info> (eth0): device state change: disconnected -> prepare (reason 'none') [30 40 0] Dec 1 13:54:10 andromeda NetworkManager[1115]: <info> Activation (eth0) Stage 1 of 5 (Device Prepare) scheduled... Dec 1 13:54:10 andromeda NetworkManager[1115]: <info> Activation (eth0) Stage 1 of 5 (Device Prepare) started... Dec 1 13:54:10 andromeda NetworkManager[1115]: <info> Activation (eth0) Stage 2 of 5 (Device Configure) scheduled... Dec 1 13:54:10 andromeda NetworkManager[1115]: <info> Activation (eth0) Stage 1 of 5 (Device Prepare) complete. Dec 1 13:54:10 andromeda NetworkManager[1115]: <info> Activation (eth0) Stage 2 of 5 (Device Configure) starting... Dec 1 13:54:10 andromeda NetworkManager[1115]: <info> (eth0): device state change: prepare -> config (reason 'none') [40 50 0] Dec 1 13:54:10 andromeda NetworkManager[1115]: <info> Activation (eth0) Stage 2 of 5 (Device Configure) successful. Dec 1 13:54:10 andromeda kernel: [ 1123.167668] e1000e: e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx Dec 1 13:54:10 andromeda kernel: [ 1123.167675] e1000e 0000:00:19.0: eth0: 10/100 speed: disabling TSO Dec 1 13:54:10 andromeda kernel: [ 1123.168430] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready Dec 1 13:54:10 andromeda NetworkManager[1115]: <info> Activation (eth0) Stage 3 of 5 (IP Configure Start) scheduled. Dec 1 13:54:10 andromeda NetworkManager[1115]: <info> Activation (eth0) Stage 2 of 5 (Device Configure) complete. Dec 1 13:54:10 andromeda NetworkManager[1115]: <info> Activation (eth0) Stage 3 of 5 (IP Configure Start) started... Dec 1 13:54:10 andromeda NetworkManager[1115]: <info> (eth0): device state change: config -> ip-config (reason 'none') [50 70 0] Dec 1 13:54:10 andromeda NetworkManager[1115]: <info> Activation (eth0) Beginning DHCPv4 transaction (timeout in 45 seconds) Dec 1 13:54:10 andromeda NetworkManager[1115]: <info> dhclient started with pid 6212 Dec 1 13:54:10 andromeda NetworkManager[1115]: <info> Activation (eth0) Stage 3 of 5 (IP Configure Start) complete. Dec 1 13:54:10 andromeda dhclient: Internet Systems Consortium DHCP Client 4.2.4 Dec 1 13:54:10 andromeda dhclient: Copyright 2004-2012 Internet Systems Consortium. Dec 1 13:54:10 andromeda dhclient: All rights reserved. Dec 1 13:54:10 andromeda dhclient: For info, please visit https://www.isc.org/software/dhcp/ Dec 1 13:54:10 andromeda dhclient: Dec 1 13:54:10 andromeda NetworkManager[1115]: <info> (eth0): DHCPv4 state changed nbi -> preinit Dec 1 13:54:10 andromeda dhclient: Listening on LPF/eth0/e8:40:f2:e2:4d:86 Dec 1 13:54:10 andromeda dhclient: Sending on LPF/eth0/e8:40:f2:e2:4d:86 Dec 1 13:54:10 andromeda dhclient: Sending on Socket/fallback Dec 1 13:54:10 andromeda dhclient: DHCPREQUEST of 192.168.11.17 on eth0 to 255.255.255.255 port 67 Dec 1 13:54:10 andromeda dhclient: DHCPACK of 192.168.11.17 from 192.168.11.1 Dec 1 13:54:10 andromeda NetworkManager[1115]: <info> (eth0): DHCPv4 state changed preinit -> reboot Dec 1 13:54:10 andromeda NetworkManager[1115]: <info> address 192.168.11.17 Dec 1 13:54:10 andromeda NetworkManager[1115]: <info> prefix 24 (255.255.255.0) Dec 1 13:54:10 andromeda NetworkManager[1115]: <info> gateway 192.168.11.1 Dec 1 13:54:10 andromeda NetworkManager[1115]: <info> hostname 'andromeda' Dec 1 13:54:10 andromeda NetworkManager[1115]: <info> nameserver '192.168.11.1' Dec 1 13:54:10 andromeda NetworkManager[1115]: <info> domain name 'hsd1.ca.comcast.net' Dec 1 13:54:10 andromeda NetworkManager[1115]: <info> Activation (eth0) Stage 5 of 5 (IPv4 Configure Commit) scheduled... Dec 1 13:54:10 andromeda NetworkManager[1115]: <info> Activation (eth0) Stage 5 of 5 (IPv4 Commit) started... Dec 1 13:54:10 andromeda avahi-daemon[890]: Joining mDNS multicast group on interface eth0.IPv4 with address 192.168.11.17. Dec 1 13:54:10 andromeda dhclient: bound to 192.168.11.17 -- renewal in 35416 seconds. Dec 1 13:54:10 andromeda avahi-daemon[890]: New relevant interface eth0.IPv4 for mDNS. Dec 1 13:54:10 andromeda avahi-daemon[890]: Registering new address record for 192.168.11.17 on eth0.IPv4. Dec 1 13:54:11 andromeda NetworkManager[1115]: <info> (eth0): device state change: ip-config -> activated (reason 'none') [70 100 0] Dec 1 13:54:11 andromeda NetworkManager[1115]: <info> ((null)): writing resolv.conf to /sbin/resolvconf Dec 1 13:54:11 andromeda dnsmasq[1907]: setting upstream servers from DBus Dec 1 13:54:11 andromeda dnsmasq[1907]: using nameserver 192.168.11.1#53 Dec 1 13:54:11 andromeda NetworkManager[1115]: <info> Policy set '82579V' (eth0) as default for IPv4 routing and DNS. Dec 1 13:54:11 andromeda NetworkManager[1115]: <info> Activation (eth0) successful, device activated. Dec 1 13:54:11 andromeda NetworkManager[1115]: <info> Activation (eth0) Stage 5 of 5 (IPv4 Commit) complete. Dec 1 13:54:11 andromeda dbus[800]: [system] Activating service name='org.freedesktop.nm_dispatcher' (using servicehelper) Dec 1 13:54:11 andromeda dbus[800]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher' Dec 1 13:54:12 andromeda avahi-daemon[890]: Joining mDNS multicast group on interface eth0.IPv6 with address fe80::ea40:f2ff:fee2:4d86. Dec 1 13:54:12 andromeda avahi-daemon[890]: New relevant interface eth0.IPv6 for mDNS. Dec 1 13:54:12 andromeda avahi-daemon[890]: Registering new address record for fe80::ea40:f2ff:fee2:4d86 on eth0.*. Dec 1 13:54:19 andromeda ntpdate[6286]: adjust time server 91.189.94.4 offset 0.001142 sec $ lspci -v 00:19.0 Ethernet controller: Intel Corporation 82579V Gigabit Network Connection (rev 04) Subsystem: Intel Corporation Device 2031 Flags: bus master, fast devsel, latency 0, IRQ 45 Memory at f7f00000 (32-bit, non-prefetchable) [size=128K] Memory at f7f39000 (32-bit, non-prefetchable) [size=4K] I/O ports at f040 [size=32] Capabilities: [c8] Power Management version 2 Capabilities: [d0] MSI: Enable+ Count=1/1 Maskable- 64bit+ Capabilities: [e0] PCI Advanced Features Kernel driver in use: e1000e Kernel modules: e1000e $ modinfo e1000e filename: /lib/modules/3.5.0-19-generic/kernel/drivers/net/e1000e/e1000e.ko version: 2.1.4-NAPI license: GPL description: Intel(R) PRO/1000 Network Driver author: Intel Corporation, <[email protected]> srcversion: 0809529BE0BBC44883956AF alias: pci:v00008086d0000153Bsv*sd*bc*sc*i* alias: pci:v00008086d0000153Asv*sd*bc*sc*i* alias: pci:v00008086d00001503sv*sd*bc*sc*i* alias: pci:v00008086d00001502sv*sd*bc*sc*i* alias: pci:v00008086d000010F0sv*sd*bc*sc*i* alias: pci:v00008086d000010EFsv*sd*bc*sc*i* alias: pci:v00008086d000010EBsv*sd*bc*sc*i* alias: pci:v00008086d000010EAsv*sd*bc*sc*i* alias: pci:v00008086d00001525sv*sd*bc*sc*i* alias: pci:v00008086d000010DFsv*sd*bc*sc*i* alias: pci:v00008086d000010DEsv*sd*bc*sc*i* alias: pci:v00008086d000010CEsv*sd*bc*sc*i* alias: pci:v00008086d000010CDsv*sd*bc*sc*i* alias: pci:v00008086d000010CCsv*sd*bc*sc*i* alias: pci:v00008086d000010CBsv*sd*bc*sc*i* alias: pci:v00008086d000010F5sv*sd*bc*sc*i* alias: pci:v00008086d000010BFsv*sd*bc*sc*i* alias: pci:v00008086d000010E5sv*sd*bc*sc*i* alias: pci:v00008086d0000294Csv*sd*bc*sc*i* alias: pci:v00008086d000010BDsv*sd*bc*sc*i* alias: pci:v00008086d000010C3sv*sd*bc*sc*i* alias: pci:v00008086d000010C2sv*sd*bc*sc*i* alias: pci:v00008086d000010C0sv*sd*bc*sc*i* alias: pci:v00008086d00001501sv*sd*bc*sc*i* alias: pci:v00008086d00001049sv*sd*bc*sc*i* alias: pci:v00008086d0000104Dsv*sd*bc*sc*i* alias: pci:v00008086d0000104Bsv*sd*bc*sc*i* alias: pci:v00008086d0000104Asv*sd*bc*sc*i* alias: pci:v00008086d000010C4sv*sd*bc*sc*i* alias: pci:v00008086d000010C5sv*sd*bc*sc*i* alias: pci:v00008086d0000104Csv*sd*bc*sc*i* alias: pci:v00008086d000010BBsv*sd*bc*sc*i* alias: pci:v00008086d00001098sv*sd*bc*sc*i* alias: pci:v00008086d000010BAsv*sd*bc*sc*i* alias: pci:v00008086d00001096sv*sd*bc*sc*i* alias: pci:v00008086d0000150Csv*sd*bc*sc*i* alias: pci:v00008086d000010F6sv*sd*bc*sc*i* alias: pci:v00008086d000010D3sv*sd*bc*sc*i* alias: pci:v00008086d0000109Asv*sd*bc*sc*i* alias: pci:v00008086d0000108Csv*sd*bc*sc*i* alias: pci:v00008086d0000108Bsv*sd*bc*sc*i* alias: pci:v00008086d0000107Fsv*sd*bc*sc*i* alias: pci:v00008086d0000107Esv*sd*bc*sc*i* alias: pci:v00008086d0000107Dsv*sd*bc*sc*i* alias: pci:v00008086d000010B9sv*sd*bc*sc*i* alias: pci:v00008086d000010D5sv*sd*bc*sc*i* alias: pci:v00008086d000010DAsv*sd*bc*sc*i* alias: pci:v00008086d000010D9sv*sd*bc*sc*i* alias: pci:v00008086d00001060sv*sd*bc*sc*i* alias: pci:v00008086d000010A5sv*sd*bc*sc*i* alias: pci:v00008086d000010BCsv*sd*bc*sc*i* alias: pci:v00008086d000010A4sv*sd*bc*sc*i* alias: pci:v00008086d0000105Fsv*sd*bc*sc*i* alias: pci:v00008086d0000105Esv*sd*bc*sc*i* depends: vermagic: 3.5.0-19-generic SMP mod_unload modversions parm: copybreak:Maximum size of packet that is copied to a new buffer on receive (uint) parm: TxIntDelay:Transmit Interrupt Delay (array of int) parm: TxAbsIntDelay:Transmit Absolute Interrupt Delay (array of int) parm: RxIntDelay:Receive Interrupt Delay (array of int) parm: RxAbsIntDelay:Receive Absolute Interrupt Delay (array of int) parm: InterruptThrottleRate:Interrupt Throttling Rate (array of int) parm: IntMode:Interrupt Mode (array of int) parm: SmartPowerDownEnable:Enable PHY smart power down (array of int) parm: KumeranLockLoss:Enable Kumeran lock loss workaround (array of int) parm: CrcStripping:Enable CRC Stripping, disable if your BMC needs the CRC (array of int) parm: EEE:Enable/disable on parts that support the feature (array of int) parm: Node:[ROUTING] Node to allocate memory on, default -1 (array of int) parm: debug:Debug level (0=none,...,16=all) (int)

Read the article

Workflow 4.5 is Awesome, cant wait for 5.0!

- by JoshReuben

About 2 years ago I wrote a blog post describing what I would like to see in Workflow vnext: http://geekswithblogs.net/JoshReuben/archive/2010/08/25/workflow-4.0---not-there-yet.aspx At the time WF 4.0 was a little rough around the edges – the State Machine was on codeplex and people were simulating state machines with Flowcharts. Last year I built a near- realtime machine management system using WF 4.0.1 – its managing the internal operations of this device: http://landanano.com/products/commercial Well WF 4.5 has come a long way – many of my gripes have been addressed: C# expressions - no more VB 'AndAlso' clauses state machine awesomeness - can query current state many designer improvements - Document Outline is so much more succinct than Designer! Separate WCF Service Contract interfaces and ability to generate activities from contract operations ability to rehydrate to updated flow definitions via DynamicUpdateMap and WorkflowIdentity you can read about the new features here: http://msdn.microsoft.com/en-us/library/hh305677(VS.110).aspx 2013 could be the year of Workflow evangelism for .NET, as it comes together as the DSL language. Eg on Azure it could be used to graphically orchestrate between WebRoles, WorkerRoles and AppFabric Queues and the ServiceBus – that would be grand. Here’s a list of things I’d like to see in Workflow 5.0: Stronger Parallelism support for true multithreaded workflows . A Workflow executes on a single thread – wouldn’t it be great if we had the ability to model TPL DataFlow? Parallel is not really parallel, just allows AsyncCodeActivity. support for recursion an ExpressionTree activity with an editor design surface a math activity pack return of application level protocol (3.51 WF services) – automatically expose a state machine as a WCF service with bookmark Receive activities generated from OperationContract automatically placed in state transition triggers. A new HTML5 ActivityDesigner control – support with different CSS3 skinnable hooks, remote connectivity (had to roll my own) A data flow view – crucial to understanding the big picture Ability to refactor a Sequence to custom activity in a separate .xaml file – like Expression Blend does for UserControl state machine global error handling - if all states goto an error state, you quickly get visual spagetti. Now you could nest a state machine, but what if you want an application level protocol whereby each state exposes certain WCF ops. DSL RAD editing - Make the Document Outline into a DSL editor for adding activities – For WF to really succeed as a higher level of abstraction, It needs to be more productive than raw coding - drag & drop on the designer is currently too slow compared to just typing code. Extensible Wizard API - for pluggable WF editor experience other execution models beyond Sequence, Flowchart & StateMachine: SSIS, Behavior Trees, Wolfram Model tool – surprise us! improvements to Designer debugging API - SourceLocation is tied to XAML file line number and char position, and ModelService access seems convoluted - why not leverage WPF LogicalTreeHelper / VisualTreeHelper ? Workflow Team , keep on rocking!

Read the article

A sample Memento pattern: Is it correct?

- by TheSilverBullet

Following this query on memento pattern, I have tried to put my understanding to test. Memento pattern stands for three things: Saving state of the "memento" object for its successful retrieval Saving carefully each valid "state" of the memento Encapsulating the saved states from the change inducer so that each state remains unaltered Have I achieved these three with my design? Problem This is a zero player game where the program is initialized with a particular set up of chess pawns - the knight and queen. Then program then needs to keep adding set of pawns or knights and queens so that each pawn is "safe" for the next one move of every other pawn. The condition is that either both pawns should be placed, or none of them should be placed. The chessboard with the most number of non conflicting knights and queens should be returned. Implementation I have 4 classes for this: protected ChessBoard (the Memento) private int [][] ChessBoard; public void ChessBoard(); protected void SetChessBoard(); protected void GetChessBoard(int); public Pawn This is not related to memento. It holds info about the pawns public enum PawnType: int { Empty = 0, Queen = 1, Knight = 2, } //This returns a value that shown if the pawn can be placed safely public bool IsSafeToAddPawn(PawnType); public CareTaker This corresponds to caretaker of memento This is a double dimentional integer array that keeps a track of all states. The reason for having 2D array is to keep track of how many states are stored and which state is currently active. An example: 0 -2 1 -1 2 0 - This is current state. With second index 0/ 3 1 - This state has been saved, but has been undone private int [][]State; private ChessBoard [] MChessBoard; //This gets the chessboard at the position requested and assigns it to originator public ChessBoard GetChessBoard(int); //This overwrites the chessboard at given position public void SetChessBoard(ChessBoard, int); private int [][]State; public PlayGame (This is the originator) private bool status; private ChessBoard oChessBoard; //This sets the state of chessboard at position specified public SetChessBoard(ChessBoard, int); //This gets the state of chessboard at position specified public ChessBoard GetChessBoard(int); //This function tries to place both the pawns and returns the status of this attempt public bool PlacePawns(Pawn);

Read the article

What does Ubuntu do when I signal undocking to a laptop?

- by Seppo Erviälä

It seems that Ubuntu runs some script or command when I signal that I want to undock my laptop by pressing the undock button on the dock. Most visible thing that happens is that resolution on external display is changed. After prepearing for undock my laptop is still connected to power, VGA-output and audio jacks through dock but not to any usb devices or optical drive. I'm running 11.04 on a ThinkPad X61s with X6 UltraBase. What happens when I signal undocking? This is what dmesg says after pressing undock button: [81459.990682] ata1.00: disabled [81459.990727] ata1.00: detaching (SCSI 0:0:0:0) [81459.991722] ACPI: \_SB_.GDCK - undocking [81460.009462] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0 [81460.020252] ehci_hcd 0000:00:1a.7: BAR 0: set to [mem 0xfe226c00-0xfe226fff] (PCI address [0xfe226c00-0xfe226fff]) [81460.020265] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0 [81460.020281] ehci_hcd 0000:00:1a.7: restoring config space at offset 0xf (was 0x300, writing 0x30b) [81460.020309] ehci_hcd 0000:00:1a.7: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900102) [81460.020338] ehci_hcd 0000:00:1a.7: PME# disabled [81460.020346] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0 [81460.020352] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0 [81460.020363] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 22 (level, low) -> IRQ 22 [81460.020372] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [81460.020432] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0 [81460.040071] ehci_hcd 0000:00:1d.7: BAR 0: set to [mem 0xfe227000-0xfe2273ff] (PCI address [0xfe227000-0xfe2273ff]) [81460.040085] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0 [81460.040104] ehci_hcd 0000:00:1d.7: restoring config space at offset 0xf (was 0x400, writing 0x40b) [81460.040133] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900102) [81460.040170] ehci_hcd 0000:00:1d.7: PME# disabled [81460.040178] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0 [81460.040184] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0 [81460.040195] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [81460.040204] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [81460.040503] ehci_hcd 0000:00:1d.7: PCI INT D disabled [81460.040552] ehci_hcd 0000:00:1d.7: PME# enabled [81460.061657] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D3 [81460.200414] usb 1-4: USB disconnect, address 14 [81462.220088] ehci_hcd 0000:00:1a.7: PCI INT C disabled [81462.220169] ehci_hcd 0000:00:1a.7: PME# enabled [81462.240115] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D3

Read the article

JavaOne 2013: (Key) Notes of a conference – State of the Java platform and all the roadmaps by Amis

- by JuergenKress

Last week’s JavaOne conference provided insights in the roadmap of the Java platform as well as in the current state of things in the Java community. The close relationship between Oracle and IBM concerning Java, the (continuing) lack of such a relationship with Google, the support from Microsoft for Java applications on its Azure cloud and the vibrant developer community – with over 200 different Java User Groups in many countries of the world. There were no major surprises or stunning announcements. Java EE 7 (release in June) was celebrated, the progress of Java 8 SE explained as well as the progress on Java Embedded and ME. The availability of NetBeans 7.4 RC1 and JDK 8 Early Adopters release as well as the open sourcing of project Avatar probably were the only real news stories. The convergence of JavaFX and Java SE is almost complete; the upcoming alignment of Java SE Embedded and Java ME is the next big consolidation step that will lead to a unified platform where developers can use the same skills, development tools and APIs on EE, SE, SE Embedded and ME development. This means that anything that runs on ME will run on SE (Embedded) and EE – not necessarily the reverse because not all SE APIs are part of the compact profile or the ME environment. However, the trimming down of the SE libraries and the increased capabilities of devices mean that a pretty rich JVM runs on many devices – such as JavaFX 8 on the Raspberry PI. The major theme of the conference was Internet of Things. A world of things that are smart and connected, devices like sensors, cameras and equipment from cars, fridges and television sets to printers, security gates and kiosks that all run Java and are all capable of sending data over local network connections or directly over the internet. The number of devices that has these capabilities is rapidly growing. This means that the number of places where Java programs can help program the behavior of devices is growing too. It also means that the volume of data generated is expanding and that we have to find ways to harvest that data, possibly do a local pre-processing (filter, aggregate) and channel the data to back end systems. Terms typically used are edge devices (small, simple, publishing data), gateways (receiving data from many devices, collecting and consolidating, pre-processing, sending onwards to back end – typically using real time event processing) and enterprise services – receiving the data-turned-information from the gateways to further consolidate, distribute and act upon. A cheap device like the Raspberry PI is a perfect way to get started as a Java developer with what embedded (device) programming means and how interaction with physical input and output takes place. Roadmaps The over all progress on Java is visualized in this overview: Read the full article here. WebLogic Partner Community For regular information become a member in the WebLogic Partner Community please visit: http://www.oracle.com/partners/goto/wls-emea ( OPN account required). If you need support with your account please contact the Oracle Partner Business Center. Blog Twitter LinkedIn Mix Forum Wiki Technorati Tags: Amis,OOW,Oracle OpenWorld,JavaOne,WebLogic,WebLogic Community,Oracle,OPN,Jürgen Kress

Read the article

State of the (Commerce) Union: What the healthcare.gov hiccups teach us about the commerce customer experience

- by Katrina Gosek

Guest Post by Brenna Johnson, Oracle Commerce Product A lot has been said about the healthcare.gov debacle in the last week. Regardless of your feelings about the Affordable Care Act, there’s a hidden issue in this story that most of the American people don’t understand: delivering a great commerce customer experience (CX) is hard. It shouldn’t be, but it is. The reality of the government’s issues getting the healthcare site up and running smooth is something we in the online commerce community know too well. If there’s one thing the botched launch of the site has taught us, it’s that regardless of the size of your budget or the power of an executive with a high-profile project, some of the biggest initiatives with the most attention (and the most at stake) don’t go as planned. It may even give you a moment of solace – we have the same issues! But why? Organizations engage too many separate vendors with different technologies, running sections or pieces of a site to get live. When things go wrong, it takes time to identify the problem – and who or what is at the center of it. Unfortunately, this is a brittle way of setting up a site, making it susceptible to breaks, bugs, and scaling issues. But, it’s the reality of running a site with legacy technology constraints in today’s demanding, customer-centric market. This approach also means there’s also a lot of cooks in lots of different kitchens. You’ve got development and IT, the business and the marketing team, an external Systems Integrator to bring it all together, a digital agency or consultant, QA, product experts, 3rd party suppliers, and the list goes on. To complicate things, different business units are held responsible for different pieces of the site and managing different technologies. And again – due to legacy organizational structure and processes, this is all accepted as the normal State of the Union. Digital commerce has been commonplace for 15 years. Yet, getting a site live, maintained and performing requires orchestrating a cast of thousands (or at least, dozens), big dollars, and some finger-crossing. But it shouldn’t. The great thing about the advent of mobile commerce and the continued maturity of online commerce is that it’s forced organizations to think from the outside, in. Consumers – whether they’re shopping for shoes or a new healthcare plan – don’t care about what technology issues or processes you have behind the scenes. They just want it to work. They want their experience to be easy, fast, and tailored to them and their needs – whatever they are. This doesn’t sound like a tall order to the American consumer – especially since they interact with sites that do work smoothly. But the reality is that it takes scores of people, teams, check-ins, late nights, testing, and some good luck to get sites to run, and even more so at Black Friday (or October 1st) traffic levels. The last thing on a customer’s mind is making excuses for why they can’t buy a product – just get it to work. So what is the government doing? My guess is working day and night to get the site performing - and having to throw big money at the problem. In the meantime they’re sending frustrated online users to the call center, or even a location where a trained “navigator” can help them in-person to complete their selection. Sounds a lot like multichannel commerce (where broken communication between siloed touchpoints will only frustrate the consumer more). One thing we’ve learned is that consumers spend their time and money with brands they know and trust. When sites are easy to use and adapt to their needs, they tend to spend more, come back, and even become long-time loyalists. Achieving this may require moving internal mountains, but there’s too much at stake to ignore the sea change in how organizations are thinking about their customer. If the thought of re-thinking your internal teams, technologies, and processes sounds like a headache, think about the pain associated with losing valuable customers – and dollars. Regardless if you’re in B2B or B2C, it’s guaranteed that your competitors are making CX a priority. Those early to the game who have made CX a priority have already begun to outpace their competition. So as you’re planning for 2014, look to the news this week. Make sure the customer experience is a focus at your organization. Expectations are at record highs. Map your customer’s journey, and think from the outside, in. How easy is it for your customers to do business with you? If they interact with many touchpoints across your organization, are the call center, website, mobile environment, or brick and mortar location in sync? Do you have the technology in place to achieve this? It’s time to give the people what they want!

Read the article

Is there a good way to QuickCheck Happstack.State methods?

- by Paul Kuliniewicz

I have a set of Happstack.State MACID methods that I want to test using QuickCheck, but I'm having trouble figuring out the most elegant way to accomplish that. The problems I'm running into are: The only way to evaluate an Ev monad computation is in the IO monad via query or update. There's no way to create a purely in-memory MACID store; this is by design. Therefore, running things in the IO monad means there are temporary files to clean up after each test. There's no way to initialize a new MACID store except with the initialValue for the state; it can't be generated via Arbitrary unless I expose an access method that replaces the state wholesale. Working around all of the above means writing methods that only use features of MonadReader or MonadState (and running the test inside Reader or State instead of Ev. This means forgoing the use of getRandom or getEventClockTime and the like inside the method definitions. The only options I can see are: Run the methods in a throw-away on-disk MACID store, cleaning up after each test and settling for starting from initialValue each time. Write the methods to have most of the code run in a MonadReader or MonadState (which is more easily testable), and rely on a small amount of non-QuickCheck-able glue around it that calls getRandom or getEventClockTime as necessary. Is there a better solution that I'm overlooking?

Read the article

MYSQL - Multiple set values in one update statement [migrated]

- by Maurzank

MYSQL - MULTIPLE SET VALUES IN ONE UPDATE STATEMENT USING 2 TABLES AS REFERENCE AND STORING VALUES IN ONE OF THOSE TABLES WITH A SPECIFIC LOGIC. Hello people, A problem came up by making an UPDATE. The example issue is as follows: CURRENUSRTABLE +------------+-------+ | ID | STATE | +------------+-------+ | 123 | 3 | | 456 | 3 | | 789 | 3 | +------------+-------+ HISTORYTABLE +------------+------------+-----+ | ID | TRDATE | ACT | +------------+------------+-----+ | 123 | 2013-11-01 | 5 | | 456 | 2013-11-01 | 5 | | 789 | 2013-11-01 | 5 | | 123 | 2013-11-02 | 4 | | 456 | 2013-11-02 | 4 | | 789 | 2013-11-02 | 4 | | 123 | 2013-11-03 | 3 | | 456 | 2013-11-03 | 3 | | 789 | 2013-11-03 | 3 | +------------+------------+-----+ I'm using these variables: @BA=3, @DE=5, @BL=4, What I'm trying to do is an update on CURRENUSRTABLE.STATE using HISTORYTABLE.ACT with the following logic: STATE value will be updated as ACT value, except when STATE value is 4 and ACT is 3, then STATE will be 5 I made this statement: UPDATE CURRENUSRTABLE RIGHT OUTER JOIN HISTORYTABLE ON HISTORYTABLE.ID=CURRENUSRTABLE.ID SET CURRENUSRTABLE.STATE= ( SELECT CASE HISTORYTABLE.ACT WHEN @DE THEN @DE WHEN @BL THEN @BL WHEN @BA THEN CASE CURRENUSRTABLE.STATE WHEN @BL THEN @DE ELSE @BA END END ORDER BY HISTORYTABLE.TRDATE,FIELD(HISTORYTABLE.ACT,@DE,@BL,@BA) ) WHERE HISTORYTABLE.TRDATE BETWEEN '2013-11-01' AND '2013-11-01' I'm intentionally using "RIGHT OUTER JOIN" and "HISTORYTABLE.TRDATE BETWEEN" because I'd like to change the values in CURRENUSRTABLE using a timeframe of more than one day. If I execute this statement many times using only one day (i.e. "BETWEEN '2013-11-01' AND '2013-11-01'" and then "BETWEEN '2013-11-02' AND '2013-11-02'"... etc ) it works perfectly, but if it is executed using the dates "BETWEEN '2013-11-01' AND '2013-11-03'" the results on CURRENUSRTABLE.STATE are 3, which is wrong, it should be 5. I think the problem relies on "CASE CURRENUSRTABLE.STATE" when uses "HISTORYTABLE.TRDATE BETWEEN '2013-11-01' AND '2013-11-03'", because it reads the STATE 9 times which has not been commited yet until the statement ends. Query OK, 9 rows affected (0.00 sec) Rows matched: 9 Changed: 9 Warnings: 0 Maybe the solution is very simple, but unfortunately I've not much practice on MySQL since I've worked with it less than 2 months :) Is there any suggestions to solve this issue? PD: MySQL version is 4.1.22, I know is very old an EOL, unfortunately I have to make these statements on this version. Thanks!

Read the article

Mail server hammering

- by Rodrigo

I've noticed a quick increase on smtp connections coming to my server, investigating it further i figured out that there's a botnet hammering my smtp server. I've tried to stop it by adding a rule at iptables: -N SMTP-BLOCK -A SMTP-BLOCK -m limit --limit 1/m --limit-burst 3 -j LOG --log-level notice --log-prefix "iptables SMTP-BLOCK " -A SMTP-BLOCK -m recent --name SMTPBLOCK --set -j DROP -A INPUT -p tcp --dport 25 -m state --state NEW -m recent --name SMTPBLOCK --rcheck --seconds 360 -j SMTP-BLOCK -A INPUT -p tcp --dport 25 -m state --state NEW -m recent --name SMTP --set -A INPUT -p tcp --dport 25 -m state --state NEW -m recent --name SMTP --rcheck --seconds 60 --hitcount 3 -j SMTP-BLOCK -A INPUT -p tcp --dport 25 -m state --state NEW -j ACCEPT That would avoid them from hammering "too fast", however the problem still, there's like 5 tries per second, it's going insane, i had to incrase the maximum number of childs of sendmail/dovecot. There's too many ips to filter out manually and simply changing the smtp to another port is not practical since i got many other clients on that server. I'm using sendmail with dovecot, any ideas to have this filtered out more efficiently?

Read the article

Bitbucket SSH and iptables

- by Astaz3l

I'm a newbie in iptables to be honest. I have some basic rules. Everything is blocked by default. iptables -t filter -F iptables -t filter -X iptables -t filter -P INPUT DROP iptables -t filter -P FORWARD DROP iptables -t filter -P OUTPUT DROP iptables -A INPUT -m state --state RELATED,ESTABLISHED -j ACCEPT iptables -A OUTPUT -m state --state RELATED,ESTABLISHED -j ACCEPT ...some rules for http, ftp etc... iptables -t filter -A OUTPUT -p tcp --dport 22 -m state --state NEW,ESTABLISHED -j ACCEPT iptables -t filter -A INPUT -p tcp --sport 22 -m state --state ESTABLISHED -j ACCEPT With the last two lines i'm trying to open the access for ssh so i can connect to bitbucket. When i try to connect to bitbucket: ssh -Tv [email protected] I got the error - connection timed out. But when I disable iptables i can connect without any problems. What am i missing? Should I add any additional rules?

Read the article

Centos does not open port/s after the rule/s are appended

- by Charlie Dyason

So after some battling and struggling with the firewall, i see that I may be doing something or the firewall isnt responding correctly there is has a port filter that is blocking certain ports. by the way, I have combed the internet, posted on forums, done almost everything and now hence the website name "serverfault", is my last resort, I need help What I hoped to achieve is create a pptp server to connect to with windows/linux clients UPDATED @ bottom Okay, here is what I did: I made some changes to my iptables file, giving me endless issues and so I restored the iptables.old file contents of iptables.old: # Firewall configuration written by system-config-firewall # Manual customization of this file is not recommended. *filter :INPUT ACCEPT [0:0] :FORWARD ACCEPT [0:0] :OUTPUT ACCEPT [0:0] -A INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT -A INPUT -p icmp -j ACCEPT -A INPUT -i lo -j ACCEPT -A INPUT -m state --state NEW -m tcp -p tcp --dport 22 -j ACCEPT -A INPUT -j REJECT --reject-with icmp-host-prohibited -A FORWARD -j REJECT --reject-with icmp-host-prohibited COMMIT after iptables.old restore(back to stock), nmap scan shows: nmap [server ip] Starting Nmap 6.00 ( nmap.org ) at 2013-11-01 13:54 SAST Nmap scan report for server.address.net ([server ip]) Host is up (0.014s latency). Not shown: 997 filtered ports PORT STATE SERVICE 22/tcp open ssh 113/tcp closed ident 8008/tcp open http Nmap done: 1 IP address (1 host up) scanned in 4.95 seconds if I append rule: (to accept all tcp ports incoming to server on interface eth0) iptables -A INPUT -i eth0 -m tcp -j ACCEPT nmap output: nmap [server ip] Starting Nmap 6.00 ( nmap.org ) at 2013-11-01 13:58 SAST Nmap scan report for server.address.net ([server ip]) Host is up (0.017s latency). Not shown: 858 filtered ports, 139 closed ports PORT STATE SERVICE 22/tcp open ssh 443/tcp open https 8008/tcp open http Nmap done: 1 IP address (1 host up) scanned in 3.77 seconds *notice it allows and opens port 443 but no other ports, and it removes port 113...? removing previous rule and if I append rule: (allow and open port 80 incoming to server on interface eth0) iptables -A INPUT -i eth0 -m tcp -p tcp --dport 80 -j ACCEPT nmap output: nmap [server ip] Starting Nmap 6.00 ( nmap.org ) at 2013-11-01 14:01 SAST Nmap scan report for server.address.net ([server ip]) Host is up (0.014s latency). Not shown: 996 filtered ports PORT STATE SERVICE 22/tcp open ssh 80/tcp closed http 113/tcp closed ident 8008/tcp open http Nmap done: 1 IP address (1 host up) scanned in 5.12 seconds *notice it removes port 443 and allows 80 but is closed without removing previous rule and if I append rule: (allow and open port 1723 incoming to server on interface eth0) iptables -A INPUT -i eth0 -m tcp -p tcp --dport 1723 -j ACCEPT nmap output: nmap [server ip] Starting Nmap 6.00 ( nmap.org ) at 2013-11-01 14:05 SAST Nmap scan report for server.address.net ([server ip]) Host is up (0.015s latency). Not shown: 996 filtered ports PORT STATE SERVICE 22/tcp open ssh 80/tcp closed http 113/tcp closed ident 8008/tcp open http Nmap done: 1 IP address (1 host up) scanned in 5.16 seconds *notice no change in ports opened or closed??? after removing rules: iptables -A INPUT -i eth0 -m tcp -p tcp --dport 80 -j ACCEPT iptables -A INPUT -i eth0 -m tcp -p tcp --dport 1723 -j ACCEPT nmap output: nmap [server ip] Starting Nmap 6.00 ( nmap.org ) at 2013-11-01 14:07 SAST Nmap scan report for server.address.net ([server ip]) Host is up (0.015s latency). Not shown: 998 filtered ports PORT STATE SERVICE 22/tcp open ssh 113/tcp closed ident Nmap done: 1 IP address (1 host up) scanned in 5.15 seconds and returning rule: (to accept all tcp ports incoming to server on interface eth0) iptables -A INPUT -i eth0 -m tcp -j ACCEPT nmap output: nmap [server ip] Starting Nmap 6.00 ( nmap.org ) at 2013-11-01 14:07 SAST Nmap scan report for server.address.net ([server ip]) Host is up (0.017s latency). Not shown: 858 filtered ports, 139 closed ports PORT STATE SERVICE 22/tcp open ssh 443/tcp open https 8008/tcp open http Nmap done: 1 IP address (1 host up) scanned in 3.87 seconds notice the eth0 changes the 999 filtered ports to 858 filtered ports, 139 closed ports QUESTION: why cant I allow and/or open a specific port, eg. I want to allow and open port 443, it doesnt allow it, or even 1723 for pptp, why am I not able to??? sorry for the layout, the editor was give issues (aswell... sigh) UPDATE @Madhatter comment #1 thank you madhatter in my iptables file: # Firewall configuration written by system-config-firewall # Manual customization of this file is not recommended. *filter :INPUT ACCEPT [0:0] :FORWARD ACCEPT [0:0] :OUTPUT ACCEPT [0:0] -A INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT -A INPUT -p icmp -j ACCEPT -A INPUT -i eth0 -j ACCEPT -A INPUT -i lo -j ACCEPT -A INPUT -m state --state NEW -m tcp -p tcp --dport 22 -j ACCEPT # ----------all rules mentioned in post where added here ONLY!!!---------- -A INPUT -j REJECT --reject-with icmp-host-prohibited -A FORWARD -j REJECT --reject-with icmp-host-prohibited COMMIT if I want to allow and open port 1723 (or edit iptables to allow a pptp connection from remote pc), what changes would I make? (please bear with me, my first time working with servers, etc.) Update MadHatter comment #2 iptables -L -n -v --line-numbers Chain INPUT (policy ACCEPT 0 packets, 0 bytes) num pkts bytes target prot opt in out source destination 1 9 660 ACCEPT all -- * * 0.0.0.0/0 0.0.0.0/0 state RELATED,ESTABLISHED 2 0 0 ACCEPT icmp -- * * 0.0.0.0/0 0.0.0.0/0 3 0 0 ACCEPT all -- eth0 * 0.0.0.0/0 0.0.0.0/0 4 0 0 ACCEPT all -- lo * 0.0.0.0/0 0.0.0.0/0 5 0 0 ACCEPT tcp -- * * 0.0.0.0/0 0.0.0.0/0 state NEW tcp dpt:22 6 0 0 REJECT all -- * * 0.0.0.0/0 0.0.0.0/0 reject-with icmp-host-prohibited Chain FORWARD (policy ACCEPT 0 packets, 0 bytes) num pkts bytes target prot opt in out source destination 1 0 0 REJECT all -- * * 0.0.0.0/0 0.0.0.0/0 reject-with icmp-host-prohibited Chain OUTPUT (policy ACCEPT 6 packets, 840 bytes) num pkts bytes target prot opt in out source destination just on a personal note, madhatter, thank you for the support , I really appreciate it! UPDATE MadHatter comment #3 here are the interfaces ifconfig eth0 Link encap:Ethernet HWaddr 00:1D:D8:B7:1F:DC inet addr:[server ip] Bcast:[server ip x.x.x].255 Mask:255.255.255.0 inet6 addr: fe80::21d:d8ff:feb7:1fdc/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:36692 errors:0 dropped:0 overruns:0 frame:0 TX packets:4247 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:2830372 (2.6 MiB) TX bytes:427976 (417.9 KiB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 b) TX bytes:0 (0.0 b) tun0 Link encap:UNSPEC HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 inet addr:10.8.0.1 P-t-P:10.8.0.2 Mask:255.255.255.255 UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:100 RX bytes:0 (0.0 b) TX bytes:0 (0.0 b) remote nmap nmap -p 1723 [server ip] Starting Nmap 6.00 ( http://nmap.org ) at 2013-11-01 16:17 SAST Nmap scan report for server.address.net ([server ip]) Host is up (0.017s latency). PORT STATE SERVICE 1723/tcp filtered pptp Nmap done: 1 IP address (1 host up) scanned in 0.51 seconds local nmap nmap -p 1723 localhost Starting Nmap 5.51 ( http://nmap.org ) at 2013-11-01 16:19 SAST Nmap scan report for localhost (127.0.0.1) Host is up (0.000058s latency). Other addresses for localhost (not scanned): 127.0.0.1 PORT STATE SERVICE 1723/tcp open pptp Nmap done: 1 IP address (1 host up) scanned in 0.11 seconds UPDATE MadHatter COMMENT POST #4 I apologize, if there might have been any confusion, i did have the rule appended: (only after 3rd post) iptables -A INPUT -p tcp --dport 1723 -j ACCEPT netstat -apn|grep -w 1723 tcp 0 0 0.0.0.0:1723 0.0.0.0:* LISTEN 1142/pptpd There are not VPN's and firewalls between the server and "me" UPDATE MadHatter comment #5 So here is an intersting turn of events: I booted into windows 7, created a vpn connection, went through the verfication username & pword - checking the sstp then checking pptp (went through that very quickly which meeans there is no problem), but on teh verfication of username and pword (before registering pc on network), it got stuck, gave this error Connection failed with error 2147943625 The remote computer refused the network connection netstat -apn | grep -w 1723 before connecting: netstat -apn |grep -w 1723 tcp 0 0 0.0.0.0:1723 0.0.0.0:* LISTEN 1137/pptpd after the error came tried again: netstat -apn |grep -w 1723 tcp 0 0 0.0.0.0:1723 0.0.0.0:* LISTEN 1137/pptpd tcp 0 0 41.185.26.238:1723 41.13.212.47:49607 TIME_WAIT - I do not know what it means but seems like there is progress..., any thoughts???

Read the article

Apache2/mod_fcgid/PHP Process Limits Not Respected

- by Daniel

I've recently moved to Apache2 / mod_fcgid / PHP from nginx / php_fpm. This is the second server on which I've made this migration, but it's used much less frequently than the first, which is working like a charm. The problem is in the PHP processes that it's spawning. In looking at the mod_fcgid documentation, it appears that the default for killing idle processes is 300 seconds; I've changed that to 20. At this point, I'd be fine if 300 would work - but it's not happening. It's been running for nearly a day now, and server-status shows 12 active processes: Process name: php5 Pid Active Idle Accesses State 19243 84879 14420 11 Ready Process name: php5 Pid Active Idle Accesses State 20954 82143 149 22 Ready 20947 82149 149 22 Ready 20953 82143 149 13 Ready Process name: php5 Pid Active Idle Accesses State 20589 82765 23644 72 Ready Process name: php5 Pid Active Idle Accesses State 17663 86103 2034 117 Ready Process name: php5 Pid Active Idle Accesses State 19862 83961 1976 91 Ready Process name: php5 Pid Active Idle Accesses State 18495 85825 5164 18 Ready Process name: php5 Pid Active Idle Accesses State 25463 75109 23948 24 Ready Process name: php5 Pid Active Idle Accesses State 2466 60019 60016 2 Ready Process name: php5 Pid Active Idle Accesses State 20729 82541 12592 23 Ready Process name: php5 Pid Active Idle Accesses State 22135 80616 46361 6 Ready PHP applications are not being served at this point - Apache is returning a 503. However, it is still serving the server-status module, and mod_mono/Mono 2.10 applications are still being served. The problem is with the PHP. /etc/apache2/mods-available/fcgid.conf... <IfModule mod_fcgid.c> AddHandler fcgid-script .fcgi FcgidConnectTimeout 10 FcgidMaxRequestsPerProcess 500 FcgidIdleTimeout 20 FcgidFixPathinfo 1 FcgidMaxProcesses 10 </IfModule> (heh - Max Processes isn't being respected either...) Of course, fcgid.conf is smylinked in mods-enabled.

Read the article

bash/sed/awk/etc remove every other newline

- by carillonator

a bash commands outputs this: Runtime Name: vmhba2:C0:T3:L14 Group State: active Runtime Name: vmhba3:C0:T0:L14 Group State: active unoptimized Runtime Name: vmhba2:C0:T1:L14 Group State: active unoptimized Runtime Name: vmhba3:C0:T3:L14 Group State: active Runtime Name: vmhba2:C0:T2:L14 Group State: active I'd like to pipe it to something to make it look like this: Runtime Name: vmhba2:C0:T1:L14 Group State: active Runtime Name: vmhba3:C0:T3:L14 Group State: active unoptimized Runtime Name: vmhba2:C0:T2:L14 Group State: active [...] i.e. remove every other newline I tried ... |tr "\nGroup" " " but it removed all newlines and ate up some other letters as well. thanks

Read the article

Simulated NAT Traversal on Virtual Box

- by Sumit Arora

I have installed virtual box ( with Two virtual Adapters(NAT-type)) - Host (Ubuntu -10.10) - Guest-Opensuse-11.4 . Objective : Trying to simulate all four types of NAT as defined here : https://wiki.asterisk.org/wiki/display/TOP/NAT+Traversal+Testing Simulating the various kinds of NATs can be done using Linux iptables. In these examples, eth0 is the private network and eth1 is the public network. Full-cone iptables -t nat -A POSTROUTING -o eth0 -j SNAT --to-source iptables -t nat -A PREROUTING -i eth0 -j DNAT --to-destination Restricted cone iptables -t nat POSTROUTING -o eth1 -p tcp -j SNAT --to-source iptables -t nat POSTROUTING -o eth1 -p udp -j SNAT --to-source iptables -t nat PREROUTING -i eth1 -p tcp -j DNAT --to-destination iptables -t nat PREROUTING -i eth1 -p udp -j DNAT --to-destination iptables -A INPUT -i eth1 -p tcp -m state --state ESTABLISHED,RELATED -j ACCEPT iptables -A INPUT -i eth1 -p udp -m state --state ESTABLISHED,RELATED -j ACCEPT iptables -A INPUT -i eth1 -p tcp -m state --state NEW -j DROP iptables -A INPUT -i eth1 -p udp -m state --state NEW -j DROP Port-restricted cone iptables -t nat -A POSTROUTING -o eth0 -j SNAT --to-source Symmentric echo "1" /proc/sys/net/ipv4/ip_forward iptables --flush iptables -t nat -A POSTROUTING -o eth1 -j MASQUERADE --random iptables -A FORWARD -i eth1 -o eth0 -m state --state RELATED,ESTABLISHED -j ACCEPT iptables -A FORWARD -i eth0 -o eth1 -j ACCEPT What I did : OpenSuse guest with Two Virtual adapters - eth0 and eth1 -- eth1 with address 10.0.3.15 /eth1:1 as 10.0.3.16 -- eth0 with address 10.0.2.15 now running stund(http://sourceforge.net/projects/stun/) client/server : Server eKimchi@linux-6j9k:~/sw/stun/stund ./server -v -h 10.0.3.15 -a 10.0.3.16 Client eKimchi@linux-6j9k:~/sw/stun/stund ./client -v 10.0.3.15 -i 10.0.2.15 On all Four Cases It is giving same results : test I = 1 test II = 1 test III = 1 test I(2) = 1 is nat = 0 mapped IP same = 1 hairpin = 1 preserver port = 1 Primary: Open Return value is 0x000001 Q-1 :Please let me know If any has ever done, It should behave like NAT as per description but nowhere it working as a NAT. Q-2: How NAT Implemented in Home routers (Usually Port Restricted), but those also pre-configured iptables rules and tuned Linux

Read the article

Cannot create zpool, how to get rid of intel raid volume?

- by nagylzs

This is a FreeBSD 9.1 amd64 computer. It has 5 disks installed. The ada0 and ada1 disks are used with a hw raid to provide the root filesystem: root@gw:/home/gandalf # ls /dev | grep ada ada0 ada1 ada2 ada3 ada4 root@gw:/home/gandalf # zpool status pool: zroot state: ONLINE scan: none requested config: NAME STATE READ WRITE CKSUM zroot ONLINE 0 0 0 raid/r0s1a ONLINE 0 0 0 errors: No known data errors I want to create a raidz pool for the remaining disks: root@gw:/home/gandalf # zpool create -f data raidz1 ada2 ada3 ada4 cannot create 'data': one or more devices is currently unavailable root@gw:/home/gandalf # dmesg | grep ada2 ada2 at ata4 bus 0 scbus6 target 0 lun 0 ada2: <WDC WD20EARS-00MVWB0 51.0AB51> ATA-8 SATA 2.x device ada2: 300.000MB/s transfers (SATA 2.x, UDMA5, PIO 8192bytes) ada2: 1907729MB (3907029168 512 byte sectors: 16H 63S/T 16383C) ada2: Previously was known as ad16 root@gw:/home/gandalf # dmesg | grep ada3 ada3 at ata5 bus 0 scbus7 target 0 lun 0 ada3: <SAMSUNG HD103UJ 1AA01118> ATA-7 SATA 2.x device ada3: 300.000MB/s transfers (SATA 2.x, UDMA5, PIO 8192bytes) ada3: 953868MB (1953523055 512 byte sectors: 16H 63S/T 16383C) ada3: Previously was known as ad18 GEOM_RAID: Intel-fb8732fa: Disk ada3 state changed from NONE to ACTIVE. GEOM_RAID: Intel-fb8732fa: Subdisk Volume0:0-ada3 state changed from NONE to ACTIVE. root@gw:/home/gandalf # dmesg | grep ada4 ada4 at ata6 bus 0 scbus8 target 0 lun 0 ada4: <TOSHIBA DT01ACA100 MS2OA750> ATA-8 SATA 3.x device ada4: 300.000MB/s transfers (SATA 2.x, UDMA5, PIO 8192bytes) ada4: 953869MB (1953525168 512 byte sectors: 16H 63S/T 16383C) ada4: Previously was known as ad20 root@gw:/home/gandalf # dmesg | grep GEOM_RAID Aha, so ada3 is already part of another raid volume? Let's see: root@gw:/home/gandalf # dmesg | grep GEOM_RAID GEOM_RAID: SiI-130628113902: Array SiI-130628113902 created. GEOM_RAID: SiI-130628113902: Disk ada0 state changed from NONE to ACTIVE. GEOM_RAID: SiI-130628113902: Subdisk SiI Raid1 Set:1-ada0 state changed from NONE to STALE. GEOM_RAID: SiI-130628113902: Disk ada1 state changed from NONE to ACTIVE. GEOM_RAID: SiI-130628113902: Subdisk SiI Raid1 Set:0-ada1 state changed from NONE to STALE. GEOM_RAID: SiI-130628113902: Array started. GEOM_RAID: SiI-130628113902: Subdisk SiI Raid1 Set:0-ada1 state changed from STALE to ACTIVE. GEOM_RAID: SiI-130628113902: Subdisk SiI Raid1 Set:1-ada0 state changed from STALE to RESYNC. GEOM_RAID: SiI-130628113902: Subdisk SiI Raid1 Set:1-ada0 rebuild start at 0. GEOM_RAID: SiI-130628113902: Volume SiI Raid1 Set state changed from STARTING to SUBOPTIMAL. GEOM_RAID: SiI-130628113902: Provider raid/r0 for volume SiI Raid1 Set created. GEOM_RAID: Intel-fb8732fa: Array Intel-fb8732fa created. GEOM_RAID: Intel-fb8732fa: Force array start due to timeout. GEOM_RAID: Intel-fb8732fa: Disk ada3 state changed from NONE to ACTIVE. GEOM_RAID: Intel-fb8732fa: Subdisk Volume0:0-ada3 state changed from NONE to ACTIVE. GEOM_RAID: Intel-fb8732fa: Array started. GEOM_RAID: Intel-fb8732fa: Volume Volume0 state changed from STARTING to DEGRADED. GEOM_RAID: Intel-fb8732fa: Provider raid/r1 for volume Volume0 created. root@gw:/home/gandalf # Yes, indeed. I want to get rid of raid/r1 completely. However, the controller was already set to "IDE" mode in the BIOS. So why it is creating a raid volume??? I have also tried overwritting the first 16k data of ada3 and reboot the computer, but it did not help. How can I delete /dev/raid/r1 ? root@gw:/home/gandalf # graid status Name Status Components raid/r0 SUBOPTIMAL ada0 (ACTIVE (RESYNC 4%)) ada1 (ACTIVE (ACTIVE)) raid/r1 DEGRADED ada3 (ACTIVE (ACTIVE)) root@gw:/home/gandalf # graid delete raid/r1 graid: Array 'raid/r1' not found. root@gw:/home/gandalf # graid delete /dev/raid/r1 graid: Array '/dev/raid/r1' not found. root@gw:/home/gandalf # Thanks

Read the article

After connecting wlan0 to bridge interface (and then removing it), can't connect to AP

- by gmonk

I'm on a laptop running Debian Jessie with kernel 3.13-1-amd64; lspci shows that my wireless NIC + driver is 04:00.0 Network controller: Intel Corporation Wireless 3160 (rev 83) Subsystem: Intel Corporation Dual Band Wireless-AC 3160 Kernel driver in use: iwlwifi This has been working without any problems, until I tried creating a bridge for lxc containers to use. I did the same thing as this person here: How-to set up a network bridge on a laptop for LXC use? -- and ended up having the same problem as this poster did, so I decided to "undo" my actions. This hasn't been successful. Actions taken so far: To configure the bridge: #> ip link add type veth #> iw dev wlan0 set 4addr on #> ifconfig veth0 up #> brctl addbr br0 #> brctl addif br0 wlan0 #> brctl addif br0 veth0 #> ifconfig br0 192.168.0.4/24 #> ifconfig wlan0 0.0.0.0 To "deconfigure": #> brctl delif br0 wlan0 #> brctl delif br0 veth0 #> iw dev wlan0 set 4addr off #> ifconfig veth0 down #> ifconfig wlan0 down #> ifconfig br0 down #> brctl delbr br0 Now, dmesg and /var/log/syslog show repeated attempts at connecting to the AP that was working before, which fail after authentication: May 27 09:16:01 myhostname kernel: [11350.757172] wlan0: authenticate with 00:18:f8:54:a3:d6 May 27 09:16:01 myhostname kernel: [11350.759036] wlan0: send auth to 00:18:f8:54:a3:d6 (try 1/3) May 27 09:16:01 myhostname NetworkManager[13992]: <info> (wlan0): supplicant interface state: scanning -> authenticating May 27 09:16:01 myhostname wpa_supplicant[8946]: wlan0: Trying to associate with 00:18:f8:54:a3:d6 (SSID='myaccesspoint' freq=2437 MHz) May 27 09:16:01 myhostname kernel: [11350.762615] wlan0: authenticated May 27 09:16:01 myhostname kernel: [11350.762753] iwlwifi 0000:04:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP May 27 09:16:01 myhostname kernel: [11350.762755] iwlwifi 0000:04:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP May 27 09:16:01 myhostname kernel: [11350.765080] wlan0: associate with 00:18:f8:54:a3:d6 (try 1/3) May 27 09:16:01 myhostname NetworkManager[13992]: <info> (wlan0): supplicant interface state: authenticating -> associating May 27 09:16:01 myhostname kernel: [11350.767474] wlan0: RX AssocResp from 00:18:f8:54:a3:d6 (capab=0x411 status=12 aid=0) May 27 09:16:01 myhostname kernel: [11350.767476] wlan0: 00:18:f8:54:a3:d6 denied association (code=12) May 27 09:16:01 myhostname wpa_supplicant[8946]: wlan0: CTRL-EVENT-ASSOC-REJECT bssid=00:18:f8:54:a3:d6 status_code=12 May 27 09:16:01 myhostname kernel: [11350.788475] wlan0: deauthenticating from 00:18:f8:54:a3:d6 by local choice (reason=3) May 27 09:16:01 myhostname NetworkManager[13992]: <info> (wlan0): supplicant interface state: associating -> disconnected May 27 09:16:01 myhostname NetworkManager[13992]: <info> (wlan0): supplicant interface state: disconnected -> scanning May 27 09:16:02 myhostname dhclient: DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 14 May 27 09:16:04 myhostname wpa_supplicant[8946]: wlan0: SME: Trying to authenticate with 00:18:f8:54:a3:d6 (SSID='myaccesspoint' freq=2437 MHz) May 27 09:16:04 myhostname kernel: [11354.559579] wlan0: authenticate with 00:18:f8:54:a3:d6 May 27 09:16:04 myhostname kernel: [11354.561458] wlan0: send auth to 00:18:f8:54:a3:d6 (try 1/3) May 27 09:16:04 myhostname wpa_supplicant[8946]: wlan0: Trying to associate with 00:18:f8:54:a3:d6 (SSID='myaccesspoint' freq=2437 MHz) May 27 09:16:04 myhostname NetworkManager[13992]: <info> (wlan0): supplicant interface state: scanning -> associating May 27 09:16:04 myhostname kernel: [11354.563445] wlan0: authenticated May 27 09:16:04 myhostname kernel: [11354.563631] iwlwifi 0000:04:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP May 27 09:16:04 myhostname kernel: [11354.563633] iwlwifi 0000:04:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP May 27 09:16:04 myhostname kernel: [11354.565727] wlan0: associate with 00:18:f8:54:a3:d6 (try 1/3) May 27 09:16:04 myhostname wpa_supplicant[8946]: wlan0: Associated with 00:18:f8:54:a3:d6 May 27 09:16:04 myhostname kernel: [11354.568091] wlan0: RX AssocResp from 00:18:f8:54:a3:d6 (capab=0x411 status=0 aid=9) May 27 09:16:04 myhostname kernel: [11354.569030] wlan0: associated May 27 09:16:04 myhostname NetworkManager[13992]: <info> (wlan0): supplicant interface state: associating -> associated May 27 09:16:05 myhostname kernel: [11354.978204] wlan0: deauthenticated from 00:18:f8:54:a3:d6 (Reason: 15) May 27 09:16:05 myhostname wpa_supplicant[8946]: wlan0: CTRL-EVENT-DISCONNECTED bssid=00:18:f8:54:a3:d6 reason=15 May 27 09:16:05 myhostname kernel: [11354.992729] cfg80211: Calling CRDA to update world regulatory domain May 27 09:16:05 myhostname kernel: [11354.995004] cfg80211: World regulatory domain updated: May 27 09:16:05 myhostname kernel: [11354.995005] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) May 27 09:16:05 myhostname kernel: [11354.995006] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm) May 27 09:16:05 myhostname kernel: [11354.995007] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) May 27 09:16:05 myhostname kernel: [11354.995007] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm) May 27 09:16:05 myhostname kernel: [11354.995008] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm) May 27 09:16:05 myhostname kernel: [11354.995009] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm) May 27 09:16:05 myhostname kernel: [11354.995010] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm) May 27 09:16:05 myhostname NetworkManager[13992]: <info> (wlan0): supplicant interface state: associated -> disconnected May 27 09:16:05 myhostname NetworkManager[13992]: <info> (wlan0): supplicant interface state: disconnected -> scanning May 27 09:16:09 myhostname wpa_supplicant[8946]: wlan0: SME: Trying to authenticate with 00:18:f8:54:a3:d6 (SSID='myaccesspoint' freq=2437 MHz) May 27 09:16:09 myhostname kernel: [11358.763968] wlan0: authenticate with 00:18:f8:54:a3:d6 May 27 09:16:09 myhostname kernel: [11358.765796] wlan0: send auth to 00:18:f8:54:a3:d6 (try 1/3) May 27 09:16:09 myhostname NetworkManager[13992]: <info> (wlan0): supplicant interface state: scanning -> authenticating May 27 09:16:09 myhostname wpa_supplicant[8946]: wlan0: Trying to associate with 00:18:f8:54:a3:d6 (SSID='myaccesspoint' freq=2437 MHz) May 27 09:16:09 myhostname kernel: [11358.769957] wlan0: authenticated May 27 09:16:09 myhostname kernel: [11358.770102] iwlwifi 0000:04:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP May 27 09:16:09 myhostname kernel: [11358.770104] iwlwifi 0000:04:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP May 27 09:16:09 myhostname kernel: [11358.770846] wlan0: associate with 00:18:f8:54:a3:d6 (try 1/3) May 27 09:16:09 myhostname kernel: [11358.773358] wlan0: RX AssocResp from 00:18:f8:54:a3:d6 (capab=0x411 status=12 aid=0) May 27 09:16:09 myhostname kernel: [11358.773361] wlan0: 00:18:f8:54:a3:d6 denied association (code=12) May 27 09:16:09 myhostname NetworkManager[13992]: <info> (wlan0): supplicant interface state: authenticating -> associating May 27 09:16:09 myhostname wpa_supplicant[8946]: wlan0: CTRL-EVENT-ASSOC-REJECT bssid=00:18:f8:54:a3:d6 status_code=12 May 27 09:16:09 myhostname kernel: [11358.802187] wlan0: deauthenticating from 00:18:f8:54:a3:d6 by local choice (reason=3) May 27 09:16:09 myhostname NetworkManager[13992]: <info> (wlan0): supplicant interface state: associating -> disconnected May 27 09:16:09 myhostname NetworkManager[13992]: <info> (wlan0): supplicant interface state: disconnected -> scanning May 27 09:16:12 myhostname wpa_supplicant[8946]: wlan0: SME: Trying to authenticate with 00:18:f8:54:a3:d6 (SSID='myaccesspoint' freq=2437 MHz) May 27 09:16:12 myhostname kernel: [11362.573442] wlan0: authenticate with 00:18:f8:54:a3:d6 May 27 09:16:12 myhostname kernel: [11362.575270] wlan0: send auth to 00:18:f8:54:a3:d6 (try 1/3) May 27 09:16:12 myhostname NetworkManager[13992]: <info> (wlan0): supplicant interface state: scanning -> authenticating May 27 09:16:12 myhostname wpa_supplicant[8946]: wlan0: Trying to associate with 00:18:f8:54:a3:d6 (SSID='myaccesspoint' freq=2437 MHz) May 27 09:16:12 myhostname kernel: [11362.580334] wlan0: authenticated May 27 09:16:12 myhostname kernel: [11362.580503] iwlwifi 0000:04:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP May 27 09:16:12 myhostname kernel: [11362.580516] iwlwifi 0000:04:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP May 27 09:16:12 myhostname kernel: [11362.583508] wlan0: associate with 00:18:f8:54:a3:d6 (try 1/3) May 27 09:16:12 myhostname NetworkManager[13992]: <info> (wlan0): supplicant interface state: authenticating -> associating May 27 09:16:12 myhostname wpa_supplicant[8946]: wlan0: Associated with 00:18:f8:54:a3:d6 May 27 09:16:12 myhostname kernel: [11362.585908] wlan0: RX AssocResp from 00:18:f8:54:a3:d6 (capab=0x411 status=0 aid=9) May 27 09:16:12 myhostname kernel: [11362.586781] wlan0: associated May 27 09:16:12 myhostname NetworkManager[13992]: <info> (wlan0): supplicant interface state: associating -> associated May 27 09:16:13 myhostname kernel: [11362.947693] wlan0: deauthenticated from 00:18:f8:54:a3:d6 (Reason: 15) May 27 09:16:13 myhostname wpa_supplicant[8946]: wlan0: CTRL-EVENT-DISCONNECTED bssid=00:18:f8:54:a3:d6 reason=15 May 27 09:16:13 myhostname kernel: [11362.973461] cfg80211: Calling CRDA to update world regulatory domain May 27 09:16:13 myhostname kernel: [11362.975673] cfg80211: World regulatory domain updated: May 27 09:16:13 myhostname kernel: [11362.975675] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) May 27 09:16:13 myhostname kernel: [11362.975676] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm) May 27 09:16:13 myhostname kernel: [11362.975677] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) May 27 09:16:13 myhostname kernel: [11362.975678] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm) May 27 09:16:13 myhostname kernel: [11362.975678] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm) May 27 09:16:13 myhostname kernel: [11362.975679] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm) May 27 09:16:13 myhostname kernel: [11362.975679] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm) May 27 09:16:13 myhostname NetworkManager[13992]: <info> (wlan0): supplicant interface state: associated -> disconnected May 27 09:16:13 myhostname NetworkManager[13992]: <info> (wlan0): supplicant interface state: disconnected -> scanning May 27 09:16:14 myhostname NetworkManager[13992]: <warn> Activation (wlan0/wireless): association took too long. May 27 09:16:14 myhostname NetworkManager[13992]: <info> (wlan0): device state change: config -> failed (reason 'no-secrets') [50 120 7] May 27 09:16:14 myhostname NetworkManager[13992]: <info> Marking connection 'Auto myaccesspoint' invalid. May 27 09:16:14 myhostname NetworkManager[13992]: <warn> Activation (wlan0) failed for connection 'Auto myaccesspoint' May 27 09:16:14 myhostname NetworkManager[13992]: <info> (wlan0): device state change: failed -> disconnected (reason 'none') [120 30 0] May 27 09:16:14 myhostname NetworkManager[13992]: <info> (wlan0): deactivating device (reason 'none') [0] May 27 09:16:14 myhostname NetworkManager[13992]: <info> (wlan0): supplicant interface state: scanning -> disconnected The things that jump out at me are "deauthenticating ... by local choice( reason=3)" and the lines that contain "(reason=15)". I've tried various fixes: iwconfig wlan0 power off killing wpa_supplicant connecting with iwconfig + dhclient instead of gnome's network -manager explicitly configuring wlan0 in /etc/network/interfaces creating a /etc/wpa_supplicant.conf file ...but nothing seems to work. I'm not sure what I did wrong, or what step I've skipped in trying to get wlan0 back as a non-bridged device -- I removed it from the bridge and then deleted the bridge itself. Any ideas?

Search Results

Search found 9923 results on 397 pages for 'state'.

Page 37/397 | < Previous Page | 33 34 35 36 37 38 39 40 41 42 43 44 | Next Page >

- by Deepak Arora

- by Luiz Cláudio Duarte

- by pinaldave

- by pst007x

- by futlib

- by Vicky

- by Peter Sivák

- by [email protected]

- by Deepak Arora

- by user112055

- by JoshReuben

- by TheSilverBullet

- by Seppo Erviälä

- by JuergenKress

- by Katrina Gosek

- by Paul Kuliniewicz

- by Maurzank

- by Rodrigo

- by Astaz3l

- by Charlie Dyason

- by Daniel

- by carillonator

- by Sumit Arora

- by nagylzs

- by gmonk

< Previous Page | 33 34 35 36 37 38 39 40 41 42 43 44 | Next Page >