knowledge module - Page 371

ATI Radeon HD 4650 AGP Video card not recognized properly

- by PastorLarry

I have an ASUS ATI Radeon HD 4650 AGP in this system (yeah, I know how old it is). I've been on Ubuntu since 10.04, and the system has never properly recognized the card. I have always had the VESA drivers installed. Now that I have the time to address the problem, 12.04 was listing the card as "Unknown" under the System Settings. Meanwhile, Sysinfo recognizes the card as: Advanced Micro Devices [AMD] nee ATI RV730 Pro AGP [Radeon HD 4600 Series] (prog-if 00 [VGA controller]) Subsystem: ASUSTeK Computer Inc. Device 0028 So I know that this card should be using the radeon driver (or even the radeonhd driver). However, when I installed the mesa-utils package, the card is suddenly reported as: Gallium 0.4 on llvmpipe (LLVM 0x300) So now, I'm completely at a loss. It seems that the llvmpipe stuff has to do with OpenGL, but it still appears that I don't have the proper video driver installed. That being said, anyone know what I can do to force the system to recognize the card and use the radeon driver? [EDIT 05.28] I did look at some other information, including glxinfo and a couple of other commands (it was REALLY late, so I don't remember the other commands) and I got these: glxinfo | grep vendor: server glx vendor string: SGI client glx vendor string: Mesa Project and SGI OpenGL vendor string: X.org glxinfo | grep renderer: OpenGL renderer string: Gallium 0.4 on AMD RV730 One of the other commands gave a whole lot of info and near the end stated that the activation string for the radeon driver was "modprobe radeon". I've tried that from sudo and as root, but it doesn't seem to change anything. I'm at a complete loss. I've even added the xorg-edgers ppa to my Software Sources and updated and rebooted the system, but nothing has changed. Most of all, I can't seem to find any documentation on this issue, as it seems that it's assumed that the radeon driver will install automatically, no questions asked. I feel like such a newbie. Does anyone have any ideas on this? [edit 05.28] results of lsmod | grep radeon (in a more readable format than the comment below): radeon 733693 3 ttm 65344 1 radeon drm_kms_helper 45466 1 radeon drm 197692 5 radeon,ttm,drm_kms_helper i2c_algo_bit 13199 1 radeon [edit 05.29] This is my /etc/X11/xorg.conf: Section "ServerLayout" Identifier "aticonfig Layout" Screen 0 "aticonfig-Screen[0]-0" 0 0 EndSection Section "Module" EndSection Section "Monitor" Identifier "aticonfig-Monitor[0]-0" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" EndSection Section "Device" Identifier "aticonfig-Device[0]-0" Driver "fglrx" BusID "PCI:1:0:0" EndSection Section "Screen" Identifier "aticonfig-Screen[0]-0" So here is my question. Can I simply change the name of the driver in the device section to "radeon" instead of "fglrx" and have the radeon driver work? Or is ther a way to use this as a tmeplate and change the appropriate lines and activate the radeon driver through this file?

Read the article

Speaker at the German Visual FoxPro Developer Conference 2003

The following is an excerpt from the UniversalThread conference coverage of the German Visual FoxPro Developer Conference 2003 written by Hans-Otto Lochmann and Armin Neudert. Track: Visual FoxPro and Linux This track consists of 4 sessions presented on one day in one sequence. Originally the Linux portion of this track was to be presented by Whil Hentzen, the well-known publisher, book author and confer-ence speaker. Unfortunately some illness prevented him from joining this DevCon. Rainer got the bad news only on early Friday morning. It was definitely to late to find a replacement among the already invited speaker on such a short notice. So Rainer decided to take over these "three sessions in a row" by himself with "a little help from his friends". He hired a coach for him for the weekend and prepared slides and sessions by himself - the originally planed slides and session material were still in USA. Rainer survived barely an endless disaster of C0000005's due to various wrong configuration settings... At the presentation Jochen Kirstätter helped massively with technical details regarding Linux whereas Rainer did the slides and the presentation. Gerold Lübben then presented the MySQL part - as originally planned. This track concentrated on the how to run Visual FoxPro applications on Linux machines with the help of a Windows emulator like Wine. As more and more people use Linux machines in production (and not just for running servers), more and more invitations to bid for a development job includes the requirement to run the application in a Linux environment. If you would like to participate in such submissions, then you should get familiar with the open source operating system Linux and the open source Data Base system MySQL. [...] These sessions provided a broad, complete overview of where Linux fits into the current computing landscape from the perspective of a VFP developer, where VFP can be used with Linux, and a conceptual plan for how to approach the incorporation of Linux into your day-to-day work. In order for you to be able to work with a Linux back end, you're going to need to know something about how Linux works. The best way involves a two-step process: First, plunk down a Linux workstation on your desk next to your Windows machine and develop some experience with the new OS.Second, once you have a basic level of comfort with Linux, gained through your experience on a workstation, leverage that knowledge and learn to connect to a Linux server from your Windows machine. This track showed both of these processes: What you can expect when you set up your Linux work-station, how to set it up, how to connect to your Windows network, how to fit VFP into the mix, and even how you could use it to replace your Windows workstation in some cases. Also this track demonstrated how to connect to an existing Linux server, running MySQL or an another back end, and how to get your VFP apps talking to that back end data. This track also showed both of the positions you can take. Rainer disliked it wholeheartedly (the bad guy position in these talks) and Jochen loved it (the good guy and "typical Linux techie"-position we all love). These opposite position lasted for three sessions and both sides where shown with their Pros and Cons in live and lively discussions of the speakers (club banging was forbidden). Gerold Luebben showed how Visual Foxpro and MySQL can work together. MySQL is as one the most well known open SOURCE databases for nearly all platforms available. Particularly in eBusiness MySQL is well positioned and well known for its performance and its stability. Still we like Visual FoxPro more - for sure . [...]

Read the article

My Take on Hadoop World 2011

- by Jean-Pierre Dijcks

I’m sure some of you have read pieces about Hadoop World and I did see some headlines which were somewhat, shall we say, interesting? I thought the keynote by Larry Feinsmith of JP Morgan Chase & Co was one of the highlights of the conference for me. The reason was very simple, he addressed some real use cases outside of internet and ad platforms. The following are my notes, since the keynote was recorded I presume you can go and look at Hadoopworld.com at some point… On the use cases that were mentioned: ETL – how can I do complex data transformation at scale Doing Basel III liquidity analysis Private banking – transaction filtering to feed [relational] data marts Common Data Platform – a place to keep data that is (or will be) valuable some day, to someone, somewhere 360 Degree view of customers – become pro-active and look at events across lines of business. For example make sure the mortgage folks know about direct deposits being stopped into an account and ensure the bank is pro-active to service the customer Treasury and Security – Global Payment Hub [I think this is really consolidation of data to cross reference activity across business and geographies] Data Mining Bypass data engineering [I interpret this as running a lot of a large data set rather than on samples] Fraud prevention – work on event triggers, say a number of failed log-ins to the website. When they occur grab web logs, firewall logs and rules and start to figure out who is trying to log in. Is this me, who forget his password, or is it someone in some other country trying to guess passwords Trade quality analysis – do a batch analysis or all trades done and run them through an analysis or comparison pipeline One of the key requests – if you can say it like that – was for vendors and entrepreneurs to make sure that new tools work with existing tools. JPMC has a large footprint of BI Tools and Big Data reporting and tools should work with those tools, rather than be separate. Security and Entitlement – how to protect data within a large cluster from unwanted snooping was another topic that came up. I thought his Elephant ears graph was interesting (couldn’t actually read the points on it, but the concept certainly made some sense) and it was interesting – when asked to show hands – how the audience did not (!) think that RDBMS and Hadoop technology would overlap completely within a few years. Another interesting session was the session from Disney discussing how Disney is building a DaaS (Data as a Service) platform and how Hadoop processing capabilities are mixed with Database technologies. I thought this one of the best sessions I have seen in a long time. It discussed real use case, where problems existed, how they were solved and how Disney planned some of it. The planning focused on three things/phases: Determine the Strategy – Design a platform and evangelize this within the organization Focus on the people – Hire key people, grow and train the staff (and do not overload what you have with new things on top of their day-to-day job), leverage a partner with experience Work on Execution of the strategy – Implement the platform Hadoop next to the other technologies and work toward the DaaS platform This kind of fitted with some of the Linked-In comments, best summarized in “Think Platform – Think Hadoop”. In other words [my interpretation], step back and engineer a platform (like DaaS in the Disney example), then layer the rest of the solutions on top of this platform. One general observation, I got the impression that we have knowledge gaps left and right. On the one hand are people looking for more information and details on the Hadoop tools and languages. On the other I got the impression that the capabilities of today’s relational databases are underestimated. Mostly in terms of data volumes and parallel processing capabilities or things like commodity hardware scale-out models. All in all I liked this conference, it was great to chat with a wide range of people on Oracle big data, on big data, on use cases and all sorts of other stuff. Just hope they get a set of bigger rooms next time… and yes, I hope I’m going to be back next year!

Read the article

News you can use, PeopleTools gems at OpenWorld 2012

- by PeopleTools Strategy

Here are some of the sessions which may not have caught your eyes during your scheduling of events you would like to attend at this year's Open World! CON9183 PeopleSoft Technology Roadmap Jeff Robbins Mon, Oct 1 4:45 PM Moscone West, Room 3002/4 Jeff's session is always very well attended. Come to hear, and see, what's going to be delivered in the new release and get some thoughts on where PeopleTools and the industry is heading. CON9186 Delivering a Ground-Breaking User Interface with PeopleTools Matt Haavisto Steve Elcock Wed, Oct 3 3:30 PM Moscone West, Room 3009 This session will be wonderfully engaging for participants. As part of our demonstration, audience members will be able to interact live and real-time with our demo using their smart phones and tablets as if you are users of the system. CON9188 A Great User Experience via PeopleSoft Applications Portal Matt Haavisto Jim Marion Pramod Agrawal Mon, Oct 1 12:15 PM Moscone West, Room 3009 This session covers not only the PeopleSoft Portal, but new features like Workcenters and Dashboards, and how they all work together to form the PeopleSoft ecosystem. CON9192 Implementing a PeopleSoft Maintenance Strategy with My Update Manager Mike Thompson Mike Krajicek Tue, Oct 2 1:15 PM Moscone West, Room 3009 The LCM development team will show Oracle's My Update Manager for PeopleSoft and how it drastically simplifies deciding what updates are required for your specific environment. CON9193 Understanding PeopleSoft Maintenance Tools & How They Fit Together Mike Krajicek Wed, Oct 3 10:15 AM Moscone West, Room 3002/4 Learn about the portfolio of maintenance tools including some of the latest enhancements such as Oracle's My Update Manager for PeopleSoft, Application Data Sets, and the PeopleSoft Test Framework, and see what they can do for you. CON9200 PeopleTools Product Team Panel Discussion Jeff Robbins Willie Suh Virad Gupta Ravi Shankar Mike Krajicek Wed, Oct 3 5:00 PM Moscone West, Room 3009 Attend this session to engage in an open discussion with key members of Oracle's PeopleTools senior management team. You will be able to ask questions, hear their thoughts, and gain their insight into the PeopleTools product direction. CON9205 Securing Your PeopleSoft Integration Infrastructure Greg Kelly Keith Collins Tue, Oct 2 10:15 AM Moscone West, Room 3011 This session, with the senior integration developer, will outline Oracle's best practices for securing your integration infrastructure so that you know your web services and REST services are as secure as the rest of your PeopleSoft environment. CON9210 Performance Tuning for the PeopleSoft Administrator Tim Bower David Kurtz Mon, Oct 1 10:45 AM Moscone West, Room 3009 Meet long time technical consultants with deep knowledge of system tuning, Tim Bower of the Center of Excellence and David Kurtz, author of "PeopleSoft for the Oracle DBA". System administrators new to tuning a PeopleSoft environment as well as seasoned experts will come away with new techniques that will help them improve the performance of their PeopleSoft system. CON9055 Advanced Management of Oracle PeopleSoft with Oracle Enterprise Manager Greg Kelly Milten Garia Greg Bouras Thurs Oct 4 12:45 PM Moscone West, Room 3009 This promises to be a really interesting session as Milten Garia from CSU discusses lessons learned during the implementation of Oracle's Enterprise Manager with the PeopleSoft plug-in across a multi campus environment. There are some surprising things about Solaris 10 and the Bourne shell. Some creative work by the Unix administrators so the well tried scripts and system replication processes were largely unaffected. CON8932 New Functional PeopleTools Capabilities for the Line of Business User Jeff Robbins Tues, Oct 2 5:00 PM Moscone West, Room 3007 Using PeopleTools 8.5x capabilities like: related content, embedded help, pivot grids, hover-over, and more, Jeff will discuss how these can deliver business value and innovation which will positively impact your business without the high costs associated with upgrading your PeopleSoft applications. Check out a more detailed list here. We look forward to meeting you all there!

Read the article

What's the difference between View Criteria and Where clause?

- by frank.nimphius

Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times New Roman","serif";} A View Criteria is a filter that you apply programmatically or by definition to a View Object instance. It augments the WHERE clause in a View Object query. Named View Criteria are defined in the Query panel of the View Object and are used · In combination with the af:query component to build search forms. To do this, you drag and drop the View Criteria from the Named View Criteria node of the View Object in the Data Controls Panel. In the context menu, you then select the Query component - optionally with a result table · To restrict a View Object instance in the Application Module model. For this, select a View object instance in the right hand list of the ADF Business Component Data Model panel. Use the Edit button to add a View Criteria to the View Object instance. This ensures that the View Object instance also runs with a query filter applied. View Criteria use bind variables for query conditions that you want to pass in dynamically at runtime. Beside of the ability to apply View Criteria declaratively, you can apply them programmatically in Java. A WHERE clause, if added to a View Object query by design restricts all instances of this View Object, which usually is not what developers want. Because of the benefits - and the configuration options not explained above but in the product documentation referenced below - the recommendation is to use View Criteria. The product documentation explains View Criteria in chapter 5 of the Developer Guide: http://download.oracle.com/docs/cd/E15523_01/web.1111/b31974/bcquerying.htm#BCGIFHHF

Read the article

Tablet design guide, Endeca patterns now available

- by JuergenKress

UX Direct, an Oracle program that offers consultants, partners, and customers the same scientifically proven and reusable user experience best practices that Oracle uses to build Oracle Applications, recently added links to a new design guide for creating tablet-based solutions for enterprise applications, and to the recently published Endeca User Interface Design Pattern Library. The tablet design guide is available from the UX Direct Home page. Tap the button under “Latest patterns & tools” for “Oracle Applications UX Tablet Guide.” It provides basic help for designers, developers, and project managers trying to approach tablet design and testing from an enterprise point of view. To hear what developers are saying about it, follow the links from this post on the User Experience Assistance blog. The newly released Endeca User Interface Design Pattern Library is also available from the UX Direct Home page and from a post on the User Experience Assistance blog. It describes principled ways to solve common user interface (UI) design problems related to search, faceted navigation, and discovery. The link between Simplified UI and Oracle UX strategy, plus content you can share on the cloud, ADf, tailoring, and more Simplified User Interface in Oracle Fusion Applications Fronts Oracle Cloud Offerings This new article on Simplified UI has just been posted on Usable Apps. Learn about the three themes - simplicity, mobility, and extensibility – that Simplified UI embodies. These same principles are guiding the development of the next generation of the Oracle user experience. Oracle's Applications User Experience Strategy: One Cloud User Experience, with Optimized UIs Where and How You Want This podcast from Misha Vaughan, Director, User Experience, is now available on the Oracle University Knowledge Center. It is available for partners and Oracle employees at this iLearning Link. Oracle Partner Builds User Experience That Hits Right Note for New Employees This new article on the Usable Apps website explores the experience of consultants at IntraSee as they implement a PeopleSoft onboarding process for Invesco, a global asset management company. The Feng Shui of Fusion This article in Oracle Scene is from Grant Ronald, Director of Product Management, on the Tools of Fusion: Oracle JDeveloper and Oracle ADF. Hands-On Workshop with Fusion Applications and ADF UX Desktop Design Patterns This post on the Voice of User Experience, or VoX, blog from Misha Vaughan describes a new kind of workshop for partners and a handful of internal Oracle sales folks on extending Oracle Fusion Applications and building custom applications with Application Development Framework (ADF) while maintaining the Oracle user experience. To learn more about the content that was delivered during this three-day workshop, visit the Usable Apps blog. Recent posts from a new blog series take a look at several of the topics discussed during the workshop. Applications User Experience Fundamentals Visual Design for any Enterprise User Interface / Art School in a Box Wireframing / Blueprinting Usable Applications Concepts. Tailoring videos This blog post from Richard Bingham, Applications Architect, on the Fusion Applications Developer Relations blog provides links to several videos that show many customization and development tasks using the Oracle Fusion Applications platform. SOA & BPM Partner Community For regular information on Oracle SOA Suite become a member in the SOA & BPM Partner Community for registration please visit www.oracle.com/goto/emea/soa (OPN account required) If you need support with your account please contact the Oracle Partner Business Center. Blog Twitter LinkedIn Facebook Wiki Mix Forum Technorati Tags: UX,Architecture,SOA Community,Oracle SOA,Oracle BPM,Community,OPN,Jürgen Kress

Read the article

How to switch between views in android?

- by aurezza

I've tried several methods to switch between two views in my program. I've tried creating a new thread then have the view run for 5 seconds before creating intent to start my main activity. This is the code snippet from the said view class: mHelpThread = new Thread(){ @Override public void run(){ try { synchronized(this){ // Wait given period of time or exit on touch wait(5000); } } catch(InterruptedException ex){ } finish(); // Run next activity Intent intent = new Intent(Intent.ACTION_MAIN, null); intent.addCategory(Intent.CATEGORY_HOME); startActivity(intent); //stop(); } }; mHelpThread.start(); I can access the said view without error but it doesn't disappear after 5 seconds nor did it switched to main view when I even utilized an onTouchEvent() to detect touch on the screen of which it should have automatically closed. I've also tried adding a button on the said view to manually switch to main view: @Override public void onCreate(Bundle savedInstanceState) { super.onCreate(savedInstanceState); setContentView(R.layout.help); final HelpView helpView = this; final Button btnback = (Button) findViewById(R.id.back); btnback.setOnClickListener(new View.OnClickListener(){ public void onClick(View v) { Intent intent = new Intent(helpView, MainActivity.class); startActivity(intent); } }); } These codes worked, though, for creating a launcher for my program. So I thought that it would work the same if I added an option for help/rules(for the game) that would switch to another view. I've only since started using eclipse for android so pardon my lack of knowledge. Here is also the snippet from my manifest: <uses-sdk android:minSdkVersion="11" android:targetSdkVersion="15" /> <application android:icon="@drawable/ic_launcher" android:label="@string/app_name" android:theme="@style/AppTheme" > <activity android:name="MainActivity" android:label="@string/title_activity_main"> <intent-filter> <action android:name="android.intent.action.MAIN" /> <category android:name="android.intent.category.DEFAULT"/> </intent-filter> <intent-filter></intent-filter> </activity> <activity android:name="SplashScreen" android:theme="@style/Theme.Transparent"> <intent-filter> <action android:name="android.intent.action.MAIN"/> <category android:name="android.intent.category.LAUNCHER"/> </intent-filter> </activity> <activity android:name="HelpView" android:theme="@style/Theme.Transparent"> <intent-filter> <action android:name="android.intent.action.MAIN"/> <category android:name="android.intent.category.DEFAULT"/> </intent-filter> <intent-filter></intent-filter> </activity> </application>

Read the article

Customer Spotlight - CSX: Charles Pack

- by cwarticki

A couple of weeks ago, I had the distinct privilege of facilitating a training session with CSX. CSX is a wonderful customer. They've been a dedicated Oracle customer for many years. They have quite an extensive Oracle footprint including Server Technologies, Fusion Middleware and E-Business Suite products. They also utilize Oracle's Solution Support Center offering from Advanced Customer Services, for their Database products. I'm always on the lookout for Oracle gems and I discovered one at CSX. Before my session began, I met with Charles Pack. In my view, he's an Oracle guru. Don't take my word for it, just read any of the books he's authored or co-authored and the one soon to be released. Just looking at his bookshelf, I saw titles going back to Oracle 7 & 8, as well as a Solaris 2.x book. Remember those? Anyway, Charles is a technologist and a manager (and wears numerous other hats too). I had a wonderful time talking with Charles and getting to know him. What do you consider keys to your personal success? Inability to quit. When I decide that I will accomplish something, I will, regardless of the nature of the challenge. Never quitting means a perpetual drive for change and progress and setting examples for others to follow. The reason I write OCP books is because I can provide a path for people to improve their knowledge of the product, gain a certification, and reach their professional goals. What do you consider the most important part of your job? Negotiations. We all have competing goals, incentives and finite resources, but we should all have the same common goal – progress. So finding the way for all parties to progress is the most important thing we do. What is the most important part of your relationship with Oracle? Oracle provides solutions – not just products - that are critical to our business success. So continuous communication regarding education, services, product roadmaps and shared goals is the most important part of our ongoing relationship. Charles is an Oracle loyalist. His career has been based on using our products and he's passionate about the products he works with. You can tell, just by talking with him. I appreciate Charles and other customers like him. He's an expert in his field and an Oracle evangelist. He is an asset to CSX and to their success. He's an advocate for Oracle and an asset to our customers. You can also friend and follow Charles on Twitter @charlesapack It was a pleasure meeting you Charles! -Chris Warticki Global Customer Management

Read the article

Should I be looking for an alternative to Zen Cart as my business grows?

- by MarkS

I created a business website for a family business which is growing. It's my family, and I'm a software developer, but I don't want to rebuild the wheels or be a shopping cart programmer. For this business, I need the web store to "just work", but... it gets complicated... There are two parts of this business website. One of them is driven by Wordpress and I use the awesome Thesis theme. This is modern, flexible, and saves me a lot of time from doing custom coding and styling. I couldn't be more pleased with this arrangement. The other part of the site is a Zen Cart store. It's administration and it's flexibility is frustrating and archaic Web 1.0. For the past few years, I keep hearing that the developers are working on a 2.0 version of Zen Cart, but they haven't communicated anything significant in the past few years other than to say, "When it's ready, we'll let you know." What I'm looking for in a cart, I would need to install 6-10 additional mods, and would need to do a lot of custom coding. I'm now willing to pay for a top-notch e-commerce solution for a small business that we can grow up into a larger business over time. Requirements: Extremely flexible shipping that let's us set up rules per product/category, tables of rates, calculated rates, max package weighs, etc. (flexibility like that available with CEON Advance Shipping Module for Zen Cart Coupons and gift certificates Manual order entry for phone orders Multi-channel support (We also sell on Amazon, eBay, use Google Base and we want to maintain one set of inventory and have it kept current) Decent SEO features Reviews and star-ratings on products Easy social networking features for sharing, following, liking, etc) Easy integration with AdWords and analytics tracking Modern and very usable product and store administration (Like I was saying, I'm spoiled by Wordpress and Thesis) At the end of the day, I don't care if it's a hosted solution or if I have to host it myself. I just want something that is going to stay up-to-date, regularly be maintained and improved, and if I have to update it, things like the one-click update present in Wordpress is something it has to have. Professional Webmasters, if you had to run a store / website, but you had to spend your time focusing on your sales and marketing efforts rather than diffing php files and copying and tweaking them to change even the slightest details of your site, what would you choose?

Read the article

Documentation in Oracle Retail Merchandising System (RMS) and Oracle Retail Fiscal Management System (ORFM), Release 13.2.4

- by Oracle Retail Documentation Team

The Patch Release 13.2.4 of the Oracle Retail Merchandising System (RMS) and its module, Oracle Retail Fiscal Management (ORFM) is now available from My Oracle Support. End User Documentation Enhancements The following summarize the highlights of changes made to the documentation in conjunction with the new Brazil-related functionality: Foundation chapter in the Oracle Retail Merchandising System (RMS)/Sales Audit (ReSA) Brazil Localization User GuideThis chapter was updated with a non-base Localization Flexible Attribution Solution (LFAS) section that addresses the addition of several new custom attributes to Items and Suppliers through non-base LFAS for Brazil; it also addresses the extension of the Retail Tax Integration Layer (RTIL) through the Oracle Retail Merchandising System (RMS), and Oracle Retail Fiscal Management System (ORFM). ORFM User GuideThe Purchase Order chapter was updated to include schedule related updates for a Nota Fiscal. The Fiscal Documents chapter was updated to include information on creating a new NF and searching for details using Vendor Product Number. Oracle Retail Fiscal Management/RMS Brazil Localization Implementation GuideThe Implementation Checklist chapter was updated with a note on multi-currency functionality. The Batch Processes chapter was updated with information on the NF EDI batch. The following summarize the highlights of changes made to the documentation in conjunction with the new technical certifications (see the RMS 13.2.4 Release Notes for more information): Installation Guides for RMS and for ORFM/RMS BrazilThese installation guides were updated extensively to account for the multiple technical certification enhancements in 13.2.4. White Paper: How to Upgrade from WebLogic11g 10.3.3 to WebLogic11g 10.3.4 (Doc ID: 1432575.1)See the previous blog entry regarding this new White Paper. New Documents on My Oracle Support for Brazil Localization Overview and Interfaces Tax Vendor Integration (Doc ID: 1424048.1)Oracle chooses to integrate with a third party tax expert to delivery the Brazilian solution. Oracle has built the Retail Tax Integration layer (RTIL) as the key integration component to support the integration of Oracle suite of products with external tax vendors. This paper addresses the RTIL integration interfaces with TaxWeb, providing guidance on the typical integration interfaces and operations that must be supported by other tax solutions in the Brazilian market. Oracle Retail Fiscal Management/RMS Brazil Localization: Localization Flexible Attribute Solution (LFAS) (Doc ID: 1418509.1)The white paper covers the definition of custom attributes in Localization Flexible Attribute Solution (LFAS) and enables retailers to perform data conversion changes. Retailers can add several new custom attributes to Items and Suppliers through non-base LFAS for Brazil and extend Retail Tax Integration Layer (RTIL) through the Oracle Retail Merchandising System (RMS), and Oracle Retail Fiscal Management System (RFM). Documents Published in RMS and ORFM Release 13.2.4 Oracle Retail Merchandising System Release Notes Oracle Retail Merchandising System Installation Guide Oracle Retail Merchandising System User Guide and Online Help Oracle Retail Sales Audit (ReSA) User Guide and Online Help Oracle Retail Merchandising System Operations Guide Oracle Retail Merchandising System Data Model Oracle Retail Merchandising Batch Schedule Oracle Retail Merchandising Implementation Guide Oracle Retail POS Suite 13.4.1 / Merchandising Operations Management13.2.4 Implementation Guide Oracle Retail Fiscal Management Data Model Oracle Retail Fiscal Management/RMS Brazil Localization Installation Guide Oracle Retail Fiscal Management/RMS Brazil Localization Implementation Guide Oracle Retail Fiscal Management User Guide and Online Help

Read the article

Oracle Unified Method (OUM) 6.1

- by user714714

ORACLE® UNIFIED METHOD RELEASE 6.1 Oracle’s Full Lifecycle Methodfor Deploying Oracle-Based Business Solutions About | Release | Access | Previous Announcements About Oracle is evolving the Oracle® Unified Method (OUM) to achieve the vision of supporting the entire Enterprise IT Lifecycle, including support for the successful implementation of every Oracle product. OUM replaces Legacy Methods, such as AIM Advantage, AIM for Business Flows, EMM Advantage, PeopleSoft's Compass, and Siebel's Results Roadmap. OUM provides an implementation approach that is rapid, broadly adaptive, and business-focused. OUM includes a comprehensive project and program management framework and materials to support Oracle's growing focus on enterprise-level IT strategy, architecture, and governance. Release OUM release 6.1 provides support for Application Implementation, Cloud Application Services Implementation, and Software Upgrade projects as well as the complete range of technology projects including Business Intelligence (BI), Enterprise Security, WebCenter, Service-Oriented Architecture (SOA), Application Integration Architecture (AIA), Business Process Management (BPM), Enterprise Integration, and Custom Software. Detailed techniques and tool guidance are provided, including a supplemental guide related to Oracle Tutor and UPK. This release features: Project Manager and Consultant views provide quick access to material relevant to each role OUM Cloud Application Services Implementation Approach Solution Delivery Guide 3.0 and Project Workplan Template OUM Microsoft Project Workplan Template and User's Guide updated to facilitate review and removal of out-of-scope Activities and Tasks MC.050 Application Setup Template available in Microsoft Excel format in addition to Microsoft Word format BT.070 Abbreviated Project Management Framework Presentation Template Envision Examples for Enterprise Organization Structures (BA.020), Enterprise Business Context Diagram (BA.045), and High-Level Use Cases (BA.060) Implement Examples for System Context Diagram (RD.005), Business Use Case Model (RA.015), Use Case Model (RA.023), MoSCoW List (RD.045), and Analysis Specification (AN.100) Home Page drop-down menu allows access to the method by Role, Supplemental Guidance, Method Repository, or View For a comprehensive list of features and enhancements, refer to the "What's New" page of the Method Pack. Upcoming releases will provide expanded support for Oracle's Enterprise Application suites including product-suite specific materials and guidance for tailoring OUM to support various engagement types. Access Oracle Customers Oracle customers may obtain copies of the method for their internal use – including guidelines, templates, and tailored work breakdown structure – by contracting with Oracle for a consulting engagement of two weeks or longer and meeting some additional minimum criteria. Customers, who have a signed consulting contract with Oracle and meet the engagement qualification criteria, are permitted to download the current release of OUM for their perpetual use. They may also obtain subsequent releases published during a renewable, three-year access period. Training courses are also available to these customers. Contact your local Oracle Sales Representative about enrolling in the OUM Customer Program. Oracle PartnerNetwork (OPN) Diamond, Platinum, and Gold Partners OPN Diamond, Platinum, and Gold Partners are able to access the OUM method pack, training courses, and collateral from the OPN Portal at no additional cost: Go to the OPN Portal at partner.oracle.com. Select "Sign In / Register for Account". Sign In. From the Product Resources section, select "Applications". From the Applications page, locate and select the "Oracle Unified Method" link. From the Oracle Unified Method Knowledge Zone, locate the "I want to:" section. From the I want to: section, locate and select "Implement Solutions". From the Implement Solution page, locate the "Best Practices" section. Locate and select the "Download Oracle Unified Method (OUM)" link. Previous Announcements Oracle Unified Method (OUM) Release 6.1 Oracle Unified Method (OUM) Release 6.0 Oracle Unified Method (OUM) Release 5.6 Oracle Unified Method (OUM) Release 5.5 Oracle Unified Method (OUM) Release 5.4 Oracle EMM Advantage Retired Retirement of Oracle EMM Advantage Planned for December 01, 2011

Read the article

Silverlight Cream for December 07, 2010 -- #1004

- by Dave Campbell

In this Issue: András Velvárt, Kunal Chowdhury(-2-), AvraShow, Gill Cleeren, Ian T. Lackey, Richard Waddell, Joe McBride, Michael Crump, Xpert360, keyboardP, and Pete Vickers(-2-). Above the Fold: Silverlight: "Grouping Records in Silverlight DataGrid using PagedCollectionView" Kunal Chowdhury WP7: "Phone 7 Back Button and the ListPicker control" Ian T. Lackey Shoutouts: Colin Eberhardt has some Silverlight 5 Adoption Predictions you may want to check out. Michael Crump has a post up showing lots of the goodness of Silverlight 5 from the Firestarter... screenshots, code snippets, etc: Silverlight 5 – What’s New? (Including Screenshots & Code Snippets) Kunal Chowdhury has a pretty complete Silverlight 5 feature set from the Firestarter and an embedded copy of Scott Guthrie's kenote running on the page: New Features Announced for Silverlight 5 Beta From SilverlightCream.com: Just how productive is WP7 development compared to iOS, Android and mobile Web? András Velvárt blogged about a contest he took part in to build a WP7 app in 1-1/2 hours without any prior knowledge of it's funtion. He and his team-mate were pitted against other teams on Android, IOS, and mobile Web... guess who got (almost) their entire app running? ... just too cool Andras! ... Grouping Records in Silverlight DataGrid using PagedCollectionView Kunal Chowdhury has a couple good posts up, this first one is on using the PagedCollectionView to group the records in a DataGrid... code included. Filtering Records in Silverlight DataGrid using PagedCollectionView Kunal Chowdhury then continues with another post on the PagedCollectionView only this time is showing how to do some filtering. DeepZoom Tips and Techniques AvraShow has a post up discussing using DeepZoom to explore, in his case, a Printed Circuit Board, with information about how he proceeded in doing that, and some tips and techniques along the way. The validation story in Silverlight (Part 2) Gill Cleeren has Part 2 of his Silverlight Validation series up at SilverlightShow. This post gets into IDataErrorInfo and INotifyDataErrorInfo. Lots of code and the example is available for download. Phone 7 Back Button and the ListPicker control Ian T. Lackey has a post up about the WP7 backbutton and what can get a failure from the Marketplace in that area, and how that applies to the ListPicker as well. Very Simple Example of ICommand CanExecute Method and CanExecuteChanged Event Richard Waddell has a nice detailed tutorial on ICommand and dealing with CanExecute... lots of Blend love in this post. Providing an Alternating Background Color for an ItemsControl Joe McBride has a post up discussing putting an alternating background color on an ItemsControl... you know, how you do on a grid... interesting idea, and all the code... Pimp my Silverlight Firestarter Michael Crump has a great Firestarter post up ... where and how to get the videos, the labs... a good Firestarter resource for sure. Adventures with PivotViewer Part 7: Slider control Xpert360 has part 7 of the PivotViewer series they're doing up. This time they're demonstrating taking programmatic control of the Zoom slider. Creating Transparent Lockscreen Wallpapers for WP7 I don't know keyboardP's name, but he's got a cool post up about getting an image up for the WP7 lock screen that has transparent regions on it... pretty cool actually. Windows Phone 7 Linq to XML 'strangeness' Pete Vickers has a post up describing a problem he found with Linq to XML on WP7. He even has a demo app that has the problem, and the fix... and it's all downloadable. Windows Phone 7 multi-line radio buttons Pete Vickers has another quick post up on radio buttons with so much text that it needs wrapping ... this is for WP7, but applies to Silverlight in general. Stay in the 'Light! Twitter SilverlightNews | Twitter WynApse | WynApse.com | Tagged Posts | SilverlightCream Join me @ SilverlightCream | Phoenix Silverlight User Group Technorati Tags: Silverlight Silverlight 3 Silverlight 4 Windows Phone MIX10

Read the article

Network is not working anymore - Ubuntu 12.04

- by Jonathan

Network is not working anymore - Ubuntu 12.04 Hello, I have a problem with my network connection. I have been using the same laptop with Ubuntu and the same connection for more than a year, and suddenly yesterday the connection stopped working (both wireless and wired). I've tested with another computer and the connection is fine (both wireless and wired). I've been reading similar posts but I haven't found a solution yet. I tried a few commands that I'm posting here (my system is in spanish, so I have traslated it to english, maybe the terms are not accurate): grep -i eth /var/log/syslog | tail Jun 3 18:45:40 vanesa-pc NetworkManager[3584]: (eth0): now managed Jun 3 18:45:40 vanesa-pc NetworkManager[3584]: (eth0): device state change: unmanaged - unavailable (reason 'managed') [10 20 2] Jun 3 18:45:40 vanesa-pc NetworkManager[3584]: (eth0): bringing up device. Jun 3 18:45:40 vanesa-pc NetworkManager[3584]: (eth0): preparing device. Jun 3 18:45:40 vanesa-pc kernel: [ 7351.845743] forcedeth 0000:00:0a.0: irq 41 for MSI/MSI-X Jun 3 18:45:40 vanesa-pc kernel: [ 7351.845984] forcedeth 0000:00:0a.0: eth0: no link during initialization Jun 3 18:45:40 vanesa-pc kernel: [ 7351.847103] ADDRCONF(NETDEV_UP): eth0: link is not ready Jun 3 18:45:40 vanesa-pc NetworkManager[3584]: (eth0): deactivating device (reason 'managed') [2] Jun 3 18:45:40 vanesa-pc NetworkManager[3584]: Added default wired connection 'Wired connection 1' for /sys/devices/pci0000:00/0000:00:0a.0/net/eth0 Jun 3 18:45:40 vanesa-pc kernel: [ 7351.848817] ADDRCONF(NETDEV_UP): eth0: link is not ready ifconfig -a eth0 Link encap:Ethernet addressHW 00:1b:24:fc:a8:d1 ACTIVE BROADCAST MULTICAST MTU:1500 Metric:1 Packages RX:0 errors:16 lost:0 overruns:0 frame:16 Packages TX:123 errors:0 lost:0 overruns:0 carrier:0 colissions:0 length.tailTX:1000 Bytes RX:0 (0.0 B) TX bytes:26335 (26.3 KB) Interruption:41 Base address: 0x2000 lo Link encap:Local loop Inet address:127.0.0.1 Mask:255.0.0.0 Inet6 address: ::1/128 Scope:Host ACTIVE LOOP WORKING MTU:16436 Metrics:1 Packages RX:1550 errors:0 lost:0 overruns:0 frame:0 Packages TX:1550 errors:0 lost:0 overruns:0 carrier:0 colissions:0 long.tailTX:0 Bytes RX:125312 (125.3 KB) TX bytes:125312 (125.3 KB) iwconfig lo no wireless extensions. eth0 no wireless extensions. sudo lshw -C network *-network description: Ethernet interface product: MCP67 Ethernet manufacturer: NVIDIA Corporation Physical id: a bus information: pci@0000:00:0a.0 logical name: eth0 version: a2 series: 00:1b:24:fc:a8:d1 capacity: 100Mbit/s width: 32 bits clock: 66MHz capacities: pm msi ht bus_master cap_list ethernet physical mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=forcedeth driverversion=0.64 latency=0 link=no maxlatency=20 mingnt=1 multicast=yes port=MII resources: irq:41 memoria:f6288000-f6288fff ioport:30f8(size=8) memoria:f6289c00-f6289cff memoria:f6289800-f628980f lsmod Module Size Used by usbhid 41906 0 hid 77367 1 usbhid rfcomm 38139 0 parport_pc 32114 0 ppdev 12849 0 bnep 17830 2 bluetooth 158438 10 rfcomm,bnep binfmt_misc 17292 1 joydev 17393 0 hp_wmi 13652 0 sparse_keymap 13658 1 hp_wmi nouveau 708198 3 ttm 65344 1 nouveau drm_kms_helper 45466 1 nouveau drm 197692 5 nouveau,ttm,drm_kms_helper i2c_algo_bit 13199 1 nouveau psmouse 87213 0 mxm_wmi 12859 1 nouveau serio_raw 13027 0 k8temp 12905 0 i2c_nforce2 12906 0 wmi 18744 2 hp_wmi,mxm_wmi video 19068 1 nouveau mac_hid 13077 0 lp 17455 0 parport 40930 3 parport_pc,ppdev,lp forcedeth 58096 0 Let me know if I can give you more information. Thank you very much in advance, Jonathan

Read the article

Get Across The Table & Share Your Story By Megha Kapil !!!

- by Nadiya

Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 I am sure many of you are presently sitting across the table facing an industry expert to prove your mettle. Generally when you think of an interview; first image is of someone firing you with questions & you trying to hit all the shots right. We make an interview look like a court room where you are a victim & being prosecuted to apply for job: Why have you applied for this job, why do you think you are fit for this role, tell me your strengths, tell me your weaknesses, How, When Where, What..? Interview is a process of knowing a candidate & his/her fitment in the system for interviewer; where as for interviewee its understanding the organization & his/her role. We have made this process of interview synonym to Q&A session. However, as a matter of fact the best scenario is when an interviewee initiates a conversation; which seldom happens. Why don’t we look at our Interview as a meeting to discover a prospect of lifetime, a process to showcase best of our skills, an opportunity to learn while exchanging meaningful dialogue with experts from industry? We all get inspired when we get to know somebody’s achievements. We like to listen to interesting life stories of people which are positive & motivating. Do you have a story? Everyone does… It’s only about realizing & putting it together. If you want to win the game then the only trick is to “Drive the Conversation”. Tell the interviewer your story; mind you “An Interesting Story”. It’s a non frictional story where you are the “Hero/ Heroine” & you display your strengths to the best. Your story has to be fabricated with hard facts, incidences, experiences & exposures that fits the role you are interested to be in. Story of your success, that describes your knowledge & awareness about the latest trends in industry; solutions which reflect your logical approach towards problem solving. A story which exhibits clarity of your thoughts & ambition; demonstrates your enthusiasm, willingness to learn & passion. Preparation gives you confidence & genuine preparation never goes unnoticed. Organizations look for distinctive individuals; so don’t try to be someone else. Know yourself; be what you are, articulate your characteristics & craft your Unique Story Right Now!! /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-family:"Calibri","sans-serif"; mso-ascii- mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi- mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;}

Read the article

Should I be put off a junior role that uses an online development test?

- by Ninefingers

I've applied for a junior development role, or rather been found by a recruiter looking for a developer. In order to get to a telephone interview stage I've been asked to sit one of those online coding assessments. This wasn't quite what I expected. I consider myself a fairly good developer for my age and experience, but I've no illusions about being Don Knuth or anything. The test was a series of incredibly obtuse questions asking about the results of various obscure evaluations. About 30 minutes in I was thinking to myself I hadn't intended to enter an obfuscated code contest/code golf exercise. After my last telephone interview I was asked to build something. I did. That seemed fair. Go away and work this out is more my in office experience of programming than "please evaluate this combination of lambdas, filters, maps, lists, tuples etc". So I'm a little put off, to be honest. I never claimed to know the language inside out or all the little corner cases. My questions, then: Should I be put off? Why? Why not? Are these kinds of tests what I should be expecting for junior roles? Should I learn stuff exam style? That seems to be the objective of these tests, for which you are timed and not supposed to use references or books? Normally, in the course of development I have a fairly good idea of basic types, rules, flow control and whatever. Occasionally I'll come up on something I need to use a regex for and have to go and remind myself of the exact piece of syntax I need if trying what I think should work doesn't. Or I'll come up against a module I've not used before and go and look it up. For example, if I wanted to write a server using sockets in C right now, I'd probably check the last piece of code I wrote doing that (and or the various books I have) and work from there. Chances are I probably couldn't do it exactly from scratch and from memory, although I can tell you you'd need a socket(), bind(), listen() and accept() call and you might also want select() depending on whether you intend to pthread_create or not. So I know what the calls are, but not their specific parameter list. What are your experiences if you are a recruiting manager? Are you after programmers who can quote you the API or do you not mind if your programmers have a few books on their desk and google function calls every so often?

Read the article

General website publishing questions involving domain forwarding issue

- by Gorgeousyousuf

Even though I have been having a certain level of knowledge and experience about web development I have never interested in obtaining a domain and publishing a website from my own server. Since today I have been struggling with getting my own domain and configuring it utilizing web sources. I started with learning the outline of web publishing process including web server installation, deploying a website for testing purpose,router port forwarding, getting a domain and forwarding domain to my router which will also forward http requests to my web server I am confused about some parts and so far could not get the web site accessed from outside of the network. All I try to do is just for learning purpose so I do not pay much attention to security issues for now. I have Server 2008 and IIS 7.5 installed. I use a laptop and have access to the modem over wireless and my modem is Zoom x6 5590. Well I will continue explaining what I have done so far and what I think will be after each action I did, I have successfully had access to my website on any local computer entering the internal ip address and port pair of the host machine in a browser. Next, I forwarded port 80 of my host machine creating a virtual server like 10.0.0.x(internal ip(static) of the host) - tcp - start port : 80 - end port : 80 in router options. Now I suppose every request that will come to the public Ip on port 80 will be forwarded to my host machine(10.0.0.x) over port 80. So If everyhing went as desired, the website listening on port 80 will accept the request and process the issue and finally respond bla bla bla... I suppose to access my website from outside of the network by entering http://MyPublicIp:80 in a browser but I couldn't accomplish this task by now despite using godady's domain forwarding tool,I see a small view of my website when I click the "preview" button that checks whether the address(http://publicip/Index.aspx) I entered where my domain will be forwarded is available or not. I am sure that configuring domain does not play a role in solving such a problem since using public ip and port matching does not help. So here is the first question, What is the fact that I face this problem? After that, I have couple of question regarding domain forwarding using godaddy tool. Can I forward my domain to a any port for example port 8080 other than default http port 80? Additionally, can I use a sub-domain to forward to a different port of the host? What I want to design is if the client enters www.mydomain.com, website1 will respond over a specified port and after when a client enters info.mydomain.com, another website which listens on different port will respond. I tried to add a sub-domain and forward it to a address like http://www.mydomain.com:8080/Index.aspx with no success. Can I really do that? Finally, what if I have a ftp site listening on the default port 21 and I create a domain like ftp.mydomain.com that will forward to that ftp site address. Is it possible to use sub-domains for ftp site access? I know I am more than confused but no matter whatever and however you reply to me, you will help me have a more clear view on this subject. Thank you very much from now.

Read the article

Welcome to the Oracle Retail International Blog

- by sarah.taylor(at)oracle.com

Welcome to the first post of the new Oracle Retail International Blog. Retail is an international business and today's successful retailers view themselves in the context of a global market. A niche fashion business in Tokyo will learn marketing strategies from the luxury brands of Milan, an independent grocer in Oslo will source the same global brands as a supermarket in Oklahoma, and every retailer in the world will measure their multi-channel operation against the international e-commerce giant Amazon. Why? Because today's customer is a global customer with unparalleled expectations on choice, price and service. Today's consumers have access to more information on retail than ever before. Technology allows people to shop from their home, their office or from the phone in their pocket, wherever they are and at whatever time suits them. Customers are using the web to search for products and promotions. They are also using the web to develop their voice in commenting on products and services that have delighted or disappointed. In an information rich industry, this customer element creates a new world of data. The best retailers are developing eagle eyes for reading customer activity and turning it into profitable decisions. Ultimately, whether you choose to compete or shop on price, service, product innovation, excellent operations or all of the above - the international world of retail has become an inspiration for all - retailer and consumer alike. Retail as an industry is growing and diversifying at a faster rate than ever before. Yet it is still the customer who picks the winners and the losers on the retail field. Economic circumstances transform the rules, but it is still the customer who dictates the game, the pace, the price, and the perception of the brand. Wise retailers never rest on their laurels. They are always shopping for ideas on how to improve and differentiate the offer at every touch point to meet the customer's needs better than anyone else and to gain each customer's loyalty at a time when loyalty can be cheap. With this blog, I hope that we might provide a hub for discussion around what unifies retail and how technology supports both the retailer and customer experience. Despite the competitive nature of this market, we hope that this will provide an opportunity to share experiences and lessons learnt with a view that knowledge can only help this industry to grow and develop. At Oracle we've been supporting retailers for many years. Many of us have worked within retail organisations all over the world, myself included. With this in mind, I don't feel it is too bold a statement to say that Oracle understands retail. We wouldn't be so heavily integrated in some of the biggest and most well-known names in retail if we didn't. With this blog, we intend to create a community of international retailers that can exchange ideas and experiences, debate collective challenges and drive a better understanding of this continually evolving industry. Events such as the World Retail Congress and NRF's Big Show bring enormous value to the retail industry providing platforms for discussion and learning but they happen once a year. We wanted to create a platform for discussion on a different level and that like retail, is always on. We hope not only to bring commitment to being not only the infrastructure that brings all of their systems together within a retail business, but an infrastructure that supports the industry internationally to grow and flourish through creating a platform for networking, discussion, creativity, vision and strategy. Please feel free to ask questions or comment using the comments functionality. You might also want to visit our other Oracle Retail social media sites: Facebook - http://www.facebook.com/oracleretail YouTube - http://www.youtube.com/user/oracleretail Twitter - http://twitter.com/#!/oracleretailInsight-Driven Retailing Blog - http://blogs.oracle.com/retail/

Read the article

What Counts For a DBA: Ego

- by Louis Davidson

Leaving aside, for a second, Freud’s psychoanalytical definitions, the term “ego” generally refers to a person’s sense of self, and their self-esteem. In casual usage, however, it usually appears in the adjectival form, “egotistical” (most often followed by “jerk”). You don’t need to be a jerk to be a DBA; humility is important. However, ego is important too. A good DBA needs a certain degree of self-esteem…a belief and pride in what he or she can do better than anyone else can. The ideal DBA needs to be humble enough to admit when they are wrong but egotistical enough to know when they are right, and to stand up for that knowledge and make their voice heard. In most organizations, the DBA team is seriously outnumbered by headstrong developers and clock driven managers, and “great” DBAs will often be outnumbered by…well…the not so great. In order to be heard in this environment, a DBA will not only need to be very skilled, but will also need a healthy dose of ego. As Freud might have put it, the unconscious desire of the DBA (the id) is for iron-fist control over their databases, and code that runs in them. However, the ego moderates this desire, seeking to “satisfy the id in realistic ways that, in the long term, bring benefit rather than grief“. In other words, the ego understands the need to exert a measure of control and self-belief, but also to tolerate and play nicely with developers and other DBAs. The trick, naturally, is learning how to be heard when it is important, but also to make everyone around you welcome that input, even when you have to be bold to make the “I know what I am talking about, and you…well…not so much” decisions. Consider a baseball team, bottom of the ninth inning of the championship game, man on first and down one run. Almost anyone on that team will have the ability to hit a home run, but only one or two will have the iron belief that they can pull it off in this critical, end-game situation. The player you need in this situation is the one who has passionately gone the extra mile preparing for just this moment, is bursting at the seams with self-confidence, and can look the coach in the eye and state, boldly, “Put me in, I am your best bet“. Likewise, on those occasions when high customer demand coincides with copious system errors, and panic is bubbling just beneath the surface, you don’t need the minimally qualified support person, armed with the “reboot and hope” technique (though that sometimes works!). You need the DBA who steps up and says, “Put me in” and has the skill and tenacity to back up those words and to fix the pinpoint and fix the problem, whatever it takes, while keeping customers and managers happy. Of course, the egotistical DBA will happily spend hours telling you how great they are at their job, and how brilliantly they put out a previous fire, and this is no guarantee that they can deliver. However, if an otherwise-humble DBA looks you in the eye and says, “I can do it”, then hear them out. Sometimes, this burst of ego will be exactly what’s required.

Read the article

Silverlight Cream for February 21, 2011 -- #1049

- by Dave Campbell

In this Issue: Rob Eisenberg(-2-), Gill Cleeren, Colin Eberhardt, Alex van Beek, Ishai Hachlili, Ollie Riches, Kevin Dockx, WindowsPhoneGeek(-2-), Jesse Liberty(-2-), and John Papa. Above the Fold: Silverlight: "Silverlight 4: Creating useful base classes for your views and viewmodels with PRISM 4" Alex van Beek WP7: "Google Sky on Windows Phone 7" Colin Eberhardt Shoutouts: My friends at SilverlightShow have their top 5 for last week posted: SilverlightShow for Feb 14 - 20, 2011 From SilverlightCream.com: Rob Eisenberg MVVMs Us with Caliburn.Micro! Rob Eisenberg chats with Carl and Richard on .NET Rocks episode 638 about Caliburn.Micro which takes Convention-over-Configuration further, utilizing naming conventions to handle a large number of data binding, validation and other action-based characteristics in your app. Two Caliburn Releases in One Day! Rob Eisenberg also announced that release candidates for both Caliburn 2.0 and Caliburn.Micro 1.0 are now available. Check out the docs and get the bits. Getting ready for Microsoft Silverlight Exam 70-506 (Part 6) Gill Cleeren has Part 6 of his series on getting ready for the Silverlight Exam up at SilverlightShow.... this time out, Gill is discussing app startup, localization, and using resource dictionaries, just to name a few things. Google Sky on Windows Phone 7 Colin Eberhardt has a very cool WP7 app described where he's using Google Sky as the tile source for Bing Maps, and then has a list of 110 Messier Objects.. interesting astronomical objects that you can look at... all with source! Silverlight 4: Creating useful base classes for your views and viewmodels with PRISM 4 Alex van Beek has some Prism4/Unity MVVM goodness up with this discussion of a login module using View and ViewModel base classes. Windows Phone 7 and WCF REST – Authentication Solutions Ishai Hachlili sent me this link to his post about WCF REST web service and authentication for WP7, and he offers up 2 solutions... from the looks of this, I'm also putting his blog on my watch list WP7Contrib: Isolated Storage Cache Provider Ollie Riches has a complete explanation and code example of using the IsolatedStorageCacheProvider in their WP7Contrib library. Using a ChannelFactory in Silverlight, part two: binary cows & new-born calves Kevin Dockx follows-up his post on Channel Factories with this part 2, expanding the knowledge-base into usin parameters and custom binding with binary encoding, both from reader suggestions. All about UriMapping in WP7 WindowsPhoneGeek has a post up about URI mappings in WP7 ... what it is, how to enable it in code behind or XAML, then using it either with a hyperlink button or via the NavigationService class... all with code. Passing WP7 Memory Consumption requirements with the Coding4Fun MemoryCounter tool WindowsPhoneGeek's latest is a tutorial on the use of the Memory Counter control from the Coding4Fun toolkit and WP7 Memory consumption. Getting Started With Linq Jesse Liberty gets into LINQ in his Episode 33 of his WP7 'From Scratch' series... looks like a good LINQ starting point, and he's going to be doing a series on it. Linq with Objects In his second post on LINQ, Jesse Liberty is looking at creating a Linq query against a collection of objects... always good stuff, Jesse! Silverlight TV Silverlight TV 62: The Silverlight 5 Triad Unplugged John Papa is joined by Sam George, Larry Olson, and Vijay Devetha (the Silverlight Triad) on this Silverlight TV episode 62 to discuss how the team works together, and hey... they're hiring! Stay in the 'Light! Twitter SilverlightNews | Twitter WynApse | WynApse.com | Tagged Posts | SilverlightCream Join me @ SilverlightCream | Phoenix Silverlight User Group Technorati Tags: Silverlight Silverlight 3 Silverlight 4 Windows Phone MIX10

Read the article

Oracle Unified Method (OUM) Release 5.6

- by user714714

ORACLE® UNIFIED METHOD RELEASE 5.6 Oracle’s Full Lifecycle Methodfor Deploying Oracle-Based Business Solutions About | Release | Access | Previous Announcements About Oracle is evolving the Oracle® Unified Method (OUM) to achieve the vision of supporting the entire Enterprise IT Lifecycle, including support for the successful implementation of every Oracle product. OUM replaces Legacy Methods, such as AIM Advantage, AIM for Business Flows, EMM Advantage, PeopleSoft's Compass, and Siebel's Results Roadmap. OUM provides an implementation approach that is rapid, broadly adaptive, and business-focused. OUM includes a comprehensive project and program management framework and materials to support Oracle's growing focus on enterprise-level IT strategy, architecture, and governance. Release OUM release 5.6 provides support for Application Implementation, Cloud Application Implementation, and Software Upgrade projects as well as the complete range of technology projects including Business Intelligence (BI) and Enterprise Performance Management (EPM), Enterprise Security, WebCenter, Service-Oriented Architecture (SOA), Application Integration Architecture (AIA), Business Process Management (BPM), Enterprise Integration, and Custom Software. Detailed techniques and tool guidance are provided, including a supplemental guide related to Oracle Tutor and UPK. This release features: Business Process Management (BPM) Project Engineering Supplemental Guide Cloud Roadmap View and Supplemental Guide Enterprise Security View and Supplemental Guide Service-Oriented Architecture (SOA) Governance Implementation Supplemental Guide "Tailoring OUM for Your Project" White Paper OUM Microsoft Project Workplan Template and User's Guide Mappings: OUM to J.D. Edwards OneMethodology, OUM Roles to Task Techniques: Determining Number of Iterations, Managing an OUM Project using Scrum Templates: Scrum Workplan (WM.010), Siebel CRM Enhanced / Updated: Manage Focus Area reorganized by Activities for all Views Oracle Architecture Development Process (OADP) View updated for OADP v3.0 Oracle Support Services Supplemental Guide expanded to include guidance related to IT Change Management Oracle User Productivity Kit Professional (UPK Pro) and Tutor Supplemental Guide expanded guidance for UPK Pro Service-Oriented Architecture (SOA) Application Integration Architecture (AIA) Supplemental Guide updated for SOA Tactical Project Delivery View Service-Oriented Architecture (SOA) Tactical Project Delivery View expanded to include additional tasks Siebel CRM Supplemental Guide expanded task guidance and added select Siebel-specific OUM templates WebCenter View and Supplemental Guide updated for WebCenter Portal and Content Management For a comprehensive list of features and enhancements, refer to the "What's New" page of the Method Pack. Upcoming releases will provide expanded support for Oracle's Enterprise Application suites including product-suite specific materials and guidance for tailoring OUM to support various engagement types. Access Oracle Customers Oracle customers may obtain copies of the method for their internal use – including guidelines, templates, and tailored work breakdown structure – by contracting with Oracle for a consulting engagement of two weeks or longer and meeting some additional minimum criteria. Customers, who have a signed consulting contract with Oracle and meet the engagement qualification criteria, are permitted to download the current release of OUM for their perpetual use. They may also obtain subsequent releases published during a renewable, three-year access period. Training courses are also available to these customers. Contact your local Oracle Sales Representative about enrolling in the OUM Customer Program. Oracle PartnerNetwork (OPN) Diamond, Platinum, and Gold Partners OPN Diamond, Platinum, and Gold Partners are able to access the OUM method pack, training courses, and collateral from the OPN Portal at no additional cost: Go to the OPN Portal at partner.oracle.com. Select the "Partners (Login Required)" tab. Login. Select the "Engage with Oracle" tab. From the Engage with Oracle page, locate the "Applications" heading. From the Applications heading, locate and select the "Oracle Unified Method" link. From the Oracle Unified Method Knowledge Zone, select the "Implement" tab. From the Implement tab, select the "Tools and Resources" link. Locate and select the "Oracle Unified Method (OUM)" link. Previous Announcements Oracle Unified Method (OUM) Release 5.6 Oracle Unified Method (OUM) Release 5.5 Oracle Unified Method (OUM) Release 5.4 Oracle EMM Advantage Retired Retirement of Oracle EMM Advantage Planned for December 01, 2011

Read the article

The Oracle Cash Management Secret Very Few Customers Know About

- by Theresa Hickman

Did you know that Oracle Cash Management has a robust positioning feature? I had no idea. I was under the mistaken impression that Oracle Cash Management only did bank statement reconciliations. It seems I am not alone. In fact, many Oracle Financials customers are also not aware of this even though it is delivered for free with the Oracle Financials license. Even better, last week, Oracle released an enhancement to Oracle Cash Management for Release 12 that will greatly help customers with their cash positioning needs. As we all know, credit is tight these days. Companies need better visibility of their cash and other liquidity positions to make better use of their cash resources. Today, many customers are managing their cash positions manually using spreadsheets. We also hear how many of them are maintaining larger than normal balances in numerous bank accounts because they just do not have the visibility, and therefore the comfort they need. Although spreadsheets may work in the short-term, they are not the best way to manage your cash positions for the long-term especially if you have dozens, or even hundreds of bank and brokerage accounts. Also, spreadsheets are a lot more risky because they can be overwritten, deleted, difficult to audit, etc. With the newly enhanced positioning feature in Oracle Cash Management, customers can manage their daily cash positions using an excel-like interface that is very flexible and user-configurable. You can link the worksheet to an unlimited number of bank accounts to automatically retrieve your opening balances, the current/intra-day cash inflows and outflows, as well as your expected cash flows from your Fx, Investment and Debt positions if you have Oracle's Treasury module . Oracle Cash Management also has direct integration with Oracle Receivables, Oracle Payables, and Payroll, which adds to the comprehensive picture of what's happening with your organizations' cash in real-time. Here's a screen shot of what the cash positioning page looks like: View image As you can see, your Treasurers can obtain a holistic view of all cash positions across any number of bank accounts as well as other sources of cash flow movements. Depending on how they manage their accounts, they can also use this feature to initiate or monitor bank account sweeps or transfers between their zero balance accounts (ZBA) or cash pools. The cash position worksheet provide drill down for more detail and the ability to manually enter items directly into the worksheet for even greater flexibility and control. The enhancements to this feature were released last week. The following list the patches for Release 12.0.6 and 12.1.1: For more information, visit the following website. http://launch.oracle.com. PIN: yes2try

Read the article

Oracle celebrates a successful Oracle CloudWorld in Bogotá

- by yaldahhakim

Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 written by: Diana Tamayo Tovar Oracle CloudWorld Bogotá began with scattered showers, rain and strong winds, inviting Colombians to spend a whole day in the social, mobile and complete world of Oracle Cloud. The event took place on November 6th with 807 attendees, 15 media representatives and 65 partners, who gathered to share the business value of Cloud along with Oracle executives and Colombian market leaders. Line-of-business leaders in sales and marketing, customer service and support, HR and talent management, and finance and operations, shared their ideas with Colombian customers, giving them a chance to learn, discover and engage with the tools, trends and concepts of Cloud. The highlights of the event included the presence of keynote speakers such as Bob Evans, Chief Communications Officer, and a customer testimonial session with top business leaders from insurance, finances, retail, communications and health Colombian industries, who shared their innovation experiences and success stories on workforce empowerment, talent management, cloud security, social engagement and productivity, providing best case scenarios on how Oracle has helped them transform their business with technologies like cloud, social collaboration and mobile applications. The keynote session was preceded by a customer success story from one of the largest virtual network operator in the country, providing an interesting case study of mobile banking innovation and a great customer testimonial of the importance of cross industry strategies and cloud technology. The event provided five different tracks on the main trends of how companies communicate and engage with different audiences, providing a different perspective on the importance of empowering brands through their customers, trusting and investing in technology for growth, while Oracle University shared their knowledge with “Oracle Cloud Fundamentals” a training lesson regarding Java Cloud, Database Cloud and other Oracle Cloud product technologies and solutions. The rainy day scenario included sideshows of aerial acrobatics and speed painting performances to recreate the environment of modern and flexible Cloud Solutions in a colorful and creative way. Oracle CloudWorld Bogotá was a great opportunity to expose invalid cloud Myths and the main concerns of the Colombian customers towards cloud, considering IDC Latin America studies stating that 93% of Colombian business leaders are interested in cloud but only 47% understand its business value. Spending a day in the cloud with 6 demogrounds stations, conference sessions, interesting case studies and customer testimonials will surely widen the endless market opportunities for Colombian customers, leaving them amazed with how Oracle Cloud works towards integration with other environments, non oracle applications, social media and mobile devices with bulletproof security infrastructure. /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;}

Read the article

Countdown of Top 10 Reasons to Never Ever Use a Pie Chart

- by Tony Wolfram

Pie charts are evil. They represent much of what is wrong with the poor design of many websites and software applications. They're also innefective, misleading, and innacurate. Using a pie chart as your graph of choice to visually display important statistics and information demonstrates either a lack of knowledge, laziness, or poor design skills. Figure 1: A floating, tilted, 3D pie chart with shadow trying (poorly)to show usage statistics within a graphics application. Of course, pie charts in and of themselves are not evil. This blog is really about designers making poor decisions for all the wrong reasons. In order for a pie chart to appear on a web page, somebody chose it over the other alternatives, and probably thought they were doing the right thing. They weren't. Using a pie chart is almost always a bad design decision. Figure 2: Pie Chart from an Oracle Reports User Guide A pie chart does not do the job of effectively displaying information in an elegant visual form. Being circular, they use up too much space while not allowing their labels to line up. Bar charts, line charts, and tables do a much better job. Expert designers, statisticians, and business analysts have documented their many failings, and strongly urge software and report designers not to use them. It's obvious to them that the pie chart has too many inherent defects to ever be used effectively. Figure 3: Demonstration of how comparing data between multiple pie charts is difficult. Yet pie charts are still used frequently in today's software applications, financial reports, and websites, often on the opening page as a symbol of how the data inside is represented. In an attempt to get a flashy colorful graphic to break up boring text, designers will often settle for a pie chart that looks like pac man, a colored spinning wheel, or a 3D floating alien space ship. Figure 4: Best use of a pie chart I've found yet. Why is the pie chart so popular? Through its constant use and iconic representation as the classic chart, the idea persists that it must be a good choice, since everyone else is still using it. Like a virus or an urban legend, no amount of vaccine or debunking will slow down the use of pie charts, which seem to be resistant to logic and common sense. Even the new iPad from Apple showcases the pie chart as one of its options. Figure 5: Screen shot of new iPad showcasing pie charts. Regardless of the futility in trying to rid the planet of this often used poor design choice, I now present to you my top 10 reasons why you should never, ever user a pie chart again. Number 10 - Pie Charts Just Don't Work When Comparing Data Number 9 - You Have A Better Option: The Sorted Horizontal Bar Chart Number 8 - The Pie Chart is Always Round Number 7 - Some Genius Will Make It 3D Number 6 - Legends and Labels are Hard to Align and Read Number 5 - Nobody Has Ever Made a Critical Decision Using a Pie Chart Number 4 - It Doesn't Scale Well to More Than 2 Items Number 3 - A Pie Chart Causes Distortions and Errors Number 2 - Everyone Else Uses Them: Debunking the "Urban Legend" of Pie Charts Number 1 - Pie Charts Make You Look Stupid and Lazy

Read the article

Desktop login fails, terminal works

- by Tobias

I have a freshly setup 12.04 LTS pc system (120 GB SSD, 1 TB HDD, 16 GiB RAM); since a few days, I can't login to the graphical desktop anymore: there is very short flashing shell window which disappears very quickly, and I'm confronted with the login screen again. I believe there is something about modprobe and vbox, but I can't read it fast enough ... I can login to a terminal (Ctrl+Alt+F1). It did not help to chown all contents of my home directory to me:my-group, like suggested here. This is what I could find in /var/log, grepping for the date and time (I inserted linebreaks after <my-hostname>; real time values preserved): auth.log: <date> 22:43:01 <my-hostname> lightdm: pam_succeed_if(lightdm:auth): requirement "user ingroup nopasswdlogin" not met by user "tobias" <date> 22:43:08 <my-hostname> lightdm: pam_unix(lightdm:session): session closed for user lightdm <date> 22:43:08 <my-hostname> lightdm: pam_unix(lightdm:session): session opened for user tobias by (uid=0) <date> 22:43:08 <my-hostname> lightdm: pam_ck_connector(lightdm:session): nox11 mode, ignoring PAM_TTY :0 <date> 22:43:08 <my-hostname> lightdm: pam_unix(lightdm:session): session closed for user tobias <date> 22:43:09 <my-hostname> lightdm: pam_unix(lightdm:session): session opened for user lightdm by (uid=0) <date> 22:43:09 <my-hostname> lightdm: pam_ck_connector(lightdm:session): nox11 mode, ignoring PAM_TTY :0 <date> 22:43:10 <my-hostname> lightdm: pam_succeed_if(lightdm:auth): requirement "user ingroup nopasswdlogin" not met by user "tobias" <date> 22:43:10 <my-hostname> dbus[756]: [system] Rejected send message, 2 matched rules; type="method_call", sender="1:43" (uid=104 pid=1639 comm="/usr/lib/indicator-datetime/indicator-datetime-ser") interface="org.freedesktop.DBus.Properties" member="GetAll" error name="(unset)" requested_reply="0" destination=":1.15" (uid=0 pid=1005 comm="/usr/sbin/console-kit-daemon --no-daemon ") kern.log: <date> 22:43:00 <my-hostname> kernel: [ 16.084525] eth0: no IPv6 routers present syslog: <date> 22:43:00 <my-hostname> kernel: [ 16.084525] eth0: no IPv6 routers present <date> 22:43:01 <my-hostname> ntpdate[1492]: adjust time server 91.189.94.4 offset -0.162831 sec <date> 22:43:08 <my-hostname> acpid: client 969[0:0] has disconnected <date> 22:43:08 <my-hostname> acpid: client connected from 1553[0:0] <date> 22:43:08 <my-hostname> acpid: 1 client rule loaded I have Virtualbox and Truecrypt installed, but I can't think of a reason why they might prevent a graphical login. I'm confused: What is this about requirement "user ingroup nopasswdlogin" not met? I do login using a password, and the password works ok when logging in to a terminal! Can I somehow read the error output, e.g. by delaying it, redirecting it to a file, or having the system prompt me for pressing a key? Has possibly any recent update caused my problem? Should I install the pending updates? How, btw, without access to the graphical UI? I have some working knowledge about the Linux shell, but I'm new to Ubuntu. Any help would be appreciated.

Read the article

ArchBeat Link-o-Rama Top 10 for October 28 - November 3, 2012

- by Bob Rhubart

The Top 10 most popular items shared on the OTN ArchBeat Facebook Page for the week of Oct 28 - Nov 3, 2012. Eventually, 90% of tech budgets will be outside IT departments | ZDNet Another interesting post from ZDNet blogger Joe McKendrick about changing roles in IT. ADF Mobile - Login Functionality | Andrejus Baranovskis "The new ADF Mobile approach with native deployment is cool when you want to access phone functionality (camera, email, sms and etc.), also when you want to build mobile applications with advanced UI," reports Oracle ACE Director Andrejus Baranovskis. Mobile Development Platform Strategy Chart: ADF Mobile, WebCenter Sites, Portal, Content and Social "Unlike desktop web focused efforts, the world of mobile has undergone change at a feverish pace," says social enterprise expert John Brunswick. His extensive post charts various resources that will help you keep up. ADF Essentials - The Bare Necessities | Floyd Teter The experiment is over… And now Oracle ACE Director Floyd Teter shares his impressions after spending some time with Oracle ADF Essentials, the free version of Oracle ADF. A review of Oracle SOA Suite 11g Administrator’s Handbook | RedStack "More so than any other single piece of content that I have seen on the topic, it provides the information that a SOA administrator needs to know in order to successfully configure, manage, monitor, troubleshoot and backup an Oracle SOA environment." So says Oracle Fusion Middleware A-Team solution architect Mark Nelson of Oracle SOA Suite 11g Administrator’s Handbook, by Ahmed Aboulnaga and Arun Pareek. Expanding the Oracle Enterprise Repository with functional documentation Capgemini middleware specialist Marc Kuijpers shares information on how Oracle Enterprise Repository can be configured "to contain functional assets, i.e. functional designs, use cases and a logical data model" to aid in SOA governance efforts. Podcast: Are You Future Proof? - Part 2 In Part 2, practicing architects and Oracle ACE Directors Ron Batra (AT&T), Basheer Khan (Innowave Technology), and Ronald van Luttikhuizen discuss re-tooling one’s skill set to reflect changes in enterprise IT, including the knowledge to steer stakeholders around the hype to what’s truly valuable. Easy way to access JPA with REST (JSON / XML) | Edwin Biemond Oracle ACE Edwin Biemond shows you "what is possible with JPA-RS, how easy it is and howto setup your own EclipseLink REST service." Clustering ODI11g for High-Availability Part 1: Introduction and Architecture | Richard Yeardley "JEE agents can be deployed alongside, or instead of, standalone agents," says Rittman Meade's Richard Yeardley. "But there is one key advantage in using JEE agents and WebLogic: when you deploy JEE agents as part of a WebLogic cluster they can be configured together to form a high availability cluster." Learn more in Yeardley's extensive post. 2012 IOUG Virtualization SIG – Online Symposium on Nov 7 and Nov 8 | Kai Yu Oracle ACE Director Kai Yu shares information on this week's IOUG Virtualization SIG online event. Does that make it a virtual virtualization event? Thought for the Day "If McDonalds were run like a software company, one out of every hundred Big Macs would give you food poisoning — and the response would be, 'We’re sorry, here’s a coupon for two more.'" — Mark Minasi Source: SoftwareQuotes.com

Search Results

Search found 11935 results on 478 pages for 'knowledge module'.

Page 371/478 | < Previous Page | 367 368 369 370 371 372 373 374 375 376 377 378 | Next Page >

- by PastorLarry

- by Jean-Pierre Dijcks

- by PeopleTools Strategy

- by frank.nimphius

- by JuergenKress

- by aurezza

- by cwarticki

- by MarkS

- by Oracle Retail Documentation Team

- by user714714

- by Dave Campbell

- by Jonathan

- by Nadiya

- by Ninefingers

- by Gorgeousyousuf

- by sarah.taylor(at)oracle.com

- by Louis Davidson

- by Dave Campbell

- by user714714

- by Theresa Hickman

- by yaldahhakim

- by Tony Wolfram

- by Tobias

- by Bob Rhubart

< Previous Page | 367 368 369 370 371 372 373 374 375 376 377 378 | Next Page >