Search Results

Search found 9559 results on 383 pages for 'mail rule'.

Page 371/383 | < Previous Page | 367 368 369 370 371 372 373 374 375 376 377 378  | Next Page >

• What precautions should you take when a senior employee leaves?

  - by Mahin

  EDIT : I agree one should check the reasons, why a senior level employee is leaving. But I am interested in knowing the official/management/technical/legal steps one should take after its decided that he is leaving, so that the life after him is smooth. What are the steps management should take when a senior programmer/team lead leaves your company. Some of them which I have thought about are : 1) If He used to manage hosting and domains stuff, change passwords of domain control panels and hosting panels. 2) If your published web sites have maintenance account and he is aware of credentials of that account then change this details also. 3) Suspend mail account for some time and forward all eMails of that account to some ex-employee account. After some time close that account. What are the other things one should check. I am expecting the answer to be a general check list one should follow. It should include both technical scenarios and management scenarios. Notable Suggestions so far : Effectively transfer the responsibilities of that employee to another one without causing any potential delay in your work. Protect your source code. If possible Make them to sign something to say that they don't have copies of source code.. You can also consider NDA here. Use the Notice Period to train his replacement. Now any new code to the project will be done by replacement with the help of Guy who is leaving. Ask him to create a document of things he thinks you should know. Make sure he checks everything in now and then any checkout will only be done by the replacement. Emails, copy off his email account to a pst.file (this assumes Outlook), Make this file available to his replacement. the employee should probably be given a chance to scrub the email. if you are going to keep his account open for whatever reason, check that no rules are created that forward incoming emails to an alternate address. Copy the hard drive of his computer to a network location and have someone senior go through and see if there are any files (drafts of performance reviews or other sensitive issues ) on it that someone else might need. Clearance from Accounts,Finance,Security,Library etc departments.Obtain all company property, laptops, keys, etc. If there is no reason not to, you should reward a departing person for their many years of service. Write them letters of recommendation (even if they already have a new job lined up).Say goodbye, and keep the door open. Make sure any outside clients know that the departing employee is not their main contact anymore. Never neglect the exit interview/debriefing. Confirm the last day of employment so that there is no misunderstanding Inform H/R if the employee is on H1B status, there is paperwork required to notify the government when an H1B employee leaves. Depending on how senior / what position, you might spend some time convincing him not to take the rest of the engineering staff with him. Make sure he spends his last days on a good note, because if he is not leaving on a good note, he can easily pollute the mind of his colleagues. Best Regards, Mahin Gupta EDIT : Now offered a bounty on it to get more detailed responses and practical suggestions.

  Read the article

• MySQL 5.1.49 freezing every two days

  - by maximus

  Hi all, our mysql system is "freezing" every two days. By "freezing" i mean the following: it doesn't respond to ping we can't login with SSH we don't get any answer from MySQL there is no entry in the error logs! neither from linux neither from MySQL. we have already changed to a completely new hardware, we have the same problem, so it's definitely not a hardware problem. we do not have any other software installed except a firewall (iptables rule) we can restart the server from another server using rsyslog (www.rsyslog.com)(software reset) Could someone help me, by giving me some pointers what could i do to figure out the problem? I have included every detail about our settings. Thank you in advance for your help. Max. Our system parameters and settings: System-Memory: 12GB Processor: Intel 7-920 Quadcore Operating system: Debian 5 (lenny) 64bit MySQL 5.1.49 Databases: (a) a small phpbb forum (b) a 6GB database 3 tables with about 15 million rows my.cnf # # The MySQL database server configuration file. # # You can copy this to one of: # - "/etc/mysql/my.cnf" to set global options, # - "~/.my.cnf" to set user-specific options. # # One can use all long options that the program supports. # Run program with --help to get a list of available options and with # --print-defaults to see which it would actually understand and use. # # For explanations see # http://dev.mysql.com/doc/mysql/en/server-system-variables.html # This will be passed to all mysql clients # It has been reported that passwords should be enclosed with ticks/quotes # escpecially if they contain "#" chars... # Remember to edit /etc/mysql/debian.cnf when changing the socket location. [client] port = 3306 socket = /var/run/mysqld/mysqld.sock # Here is entries for some specific programs # The following values assume you have at least 32M ram # This was formally known as [safe_mysqld]. Both versions are currently parsed. [mysqld_safe] socket = /var/run/mysqld/mysqld.sock nice = 0 [mysqld] # # * Basic Settings # user = mysql pid-file = /var/run/mysqld/mysqld.pid socket = /var/run/mysqld/mysqld.sock port = 3306 basedir = /usr datadir = /var/lib/mysql tmpdir = /tmp language = /usr/share/mysql/english skip-external-locking # # Instead of skip-networking the default is now to listen only on # localhost which is more compatible and is not less secure. bind-address = our-ip-address # # * Fine Tuning # key_buffer = 16M max_allowed_packet = 16M thread_stack = 256K thread_cache_size = 32 max_connections = 300 table_cache = 2048 #thread_concurrency = 4 # Used for InnoDB tables recommended to 50%-80% available memory innodb_buffer_pool_size = 6G # 20MB sometimes larger innodb_additional_mem_pool_size = 20M # 8M-16M is good for most situations innodb_log_buffer_size = 8M # Disable XA support because we do not use it innodb-support-xa = 0 # 1 is default wich is 100% secure but 2 offers better performance innodb_flush_log_at_trx_commit = 1 innodb_flush_method = O_DIRECT #innodb_thread_concurency = 8 # Recommended 64M - 512M depending on server size innodb_log_file_size = 512M # One file per table innodb_file_per_table # # * Query Cache Configuration # query_cache_limit = 1M query_cache_size = 16M #query_cache_type = 1 #query_cache_min_res_unit= 2K #join_buffer_size = 1M # # * Logging and Replication # # Both location gets rotated by the cronjob. # Be aware that this log type is a performance killer. # As of 5.1 you can enable the log at runtime! #general_log_file = /var/log/mysql/mysql.log #general_log = 1 # # Error logging goes to syslog. This is a Debian improvement :) # # Here you can see queries with especially long duration log_slow_queries = /var/log/mysql/mysql-slow.log long_query_time = 2 log-queries-not-using-indexes # # The following can be used as easy to replay backup logs or for replication. #server-id = 1 log_bin = /var/log/mysql/mysql-bin.log # WARNING: Using expire_logs_days without bin_log crashes the server! See README.Debian! expire_logs_days = 10 max_binlog_size = 100M #binlog_do_db = include_database_name #binlog_ignore_db = include_database_name # # InnoDB is enabled by default with a 10MB datafile in /var/lib/mysql/. # Read the manual for more InnoDB related options. There are many! # * InnoDB plugin # As of MySQL 5.1.38, the InnoDB plugin from Oracle is included in the MySQL source code. # It has many improvements and better performances than the built-in InnoDB storage engine. # Please read http://www.innodb.com/products/innodb_plugin/ for more information. # Uncommenting the two following lines to use the InnoDB plugin. ignore_builtin_innodb plugin-load=innodb=ha_innodb_plugin.so # # * Security Features # # Read the manual, too, if you want chroot! # chroot = /var/lib/mysql/ # # For generating SSL certificates I recommend the OpenSSL GUI "tinyca". # # ssl-ca=/etc/mysql/cacert.pem # ssl-cert=/etc/mysql/server-cert.pem # ssl-key=/etc/mysql/server-key.pem [mysqldump] quick quote-names max_allowed_packet = 16M [mysql] #no-auto-rehash # faster start of mysql but no tab completition [isamchk] key_buffer = 16M # # * NDB Cluster # # See /usr/share/doc/mysql-server-*/README.Debian for more information. # # The following configuration is read by the NDB Data Nodes (ndbd processes) # not from the NDB Management Nodes (ndb_mgmd processes). # # [MYSQL_CLUSTER] # ndb-connectstring=127.0.0.1 # # * IMPORTANT: Additional settings that can override those from this file! # !includedir /etc/mysql/conf.d/ UPDATE After installing sysstat and configuring it to collect data after every minute i have the following datas. I used sar to generate the following output: The log-file is too big so coudn't enter it here but uploaded to box.net. The link is http://www.box.net/shared/xc6rh7qqob SECOND UPDATE We started a ping command in the background, and that solved the problem. Now the server does work since more then a week. We still don't know what's the problem.

  Read the article

• Centos 6.3 vsftp unable to upload file to apache webserver

  - by user148648

  I am new to Centos, I did work with Sun Solaris and upload files to Apache web server before. I create an end user account and manage to ftp using command prompt to the server, error message is '226 Transfer Done (but failed to open directory). Content of my vsftpd.conf as below # Example config file /etc/vsftpd/vsftpd.conf # # The default compiled in settings are fairly paranoid. This sample file # loosens things up a bit, to make the ftp daemon more usable. # Please see vsftpd.conf.5 for all compiled in defaults. # # READ THIS: This example file is NOT an exhaustive list of vsftpd options. # Please read the vsftpd.conf.5 manual page to get a full idea of vsftpd's # capabilities. # # Allow anonymous FTP? (Beware - allowed by default if you comment this out). anonymous_enable=YES # ** may need to comment it back # # Uncomment this to allow local users to log in. local_enable=YES # # Uncomment this to enable any form of FTP write command. write_enable=YES # # Default umask for local users is 077. You may wish to change this to 022, # if your users expect that (022 is used by most other ftpd's) #local_umask=022 local_umask=077 # # Uncomment this to allow the anonymous FTP user to upload files. This only # has an effect if the above global write enable is activated. Also, you will # obviously need to create a directory writable by the FTP user. anon_upload_enable=YES # *** maybe to comment it back!!! # # Uncomment this if you want the anonymous FTP user to be able to create # new directories. anon_mkdir_write_enable=YES # ** may need to comment it back!!! # # Activate directory messages - messages given to remote users when they # go into a certain directory. dirmessage_enable=YES # # The target log file can be vsftpd_log_file or xferlog_file. # This depends on setting xferlog_std_format parameter xferlog_enable=YES # # Make sure PORT transfer connections originate from port 20 (ftp-data). connect_from_port_20=YES # # If you want, you can arrange for uploaded anonymous files to be owned by # a different user. Note! Using "root" for uploaded files is not # recommended! #chown_uploads=YES #chown_username=whoever # # The name of log file when xferlog_enable=YES and xferlog_std_format=YES # WARNING - changing this filename affects /etc/logrotate.d/vsftpd.log xferlog_file=/var/log/xferlog # # Switches between logging into vsftpd_log_file and xferlog_file files. # NO writes to vsftpd_log_file, YES to xferlog_file xferlog_std_format=YES # # You may change the default value for timing out an idle session. #idle_session_timeout=600 # # You may change the default value for timing out a data connection. #data_connection_timeout=120 # # It is recommended that you define on your system a unique user which the # ftp server can use as a totally isolated and unprivileged user. #nopriv_user=ftpsecure # # Enable this and the server will recognise asynchronous ABOR requests. Not # recommended for security (the code is non-trivial). Not enabling it, # however, may confuse older FTP clients. #async_abor_enable=YES # # By default the server will pretend to allow ASCII mode but in fact ignore # the request. Turn on the below options to have the server actually do ASCII # mangling on files when in ASCII mode. # Beware that on some FTP servers, ASCII support allows a denial of service # attack (DoS) via the command "SIZE /big/file" in ASCII mode. vsftpd # predicted this attack and has always been safe, reporting the size of the # raw file. # ASCII mangling is a horrible feature of the protocol. ascii_upload_enable=YES ascii_download_enable=YES # # You may fully customise the login banner string: ftpd_banner=Warning, only for authorize login. # # You may specify a file of disallowed anonymous e-mail addresses. Apparently # useful for combatting certain DoS attacks. #deny_email_enable=YES # (default follows) #banned_email_file=/etc/vsftpd/banned_emails # # You may specify an explicit list of local users to chroot() to their home # directory. If chroot_local_user is YES, then this list becomes a list of # users to NOT chroot(). chroot_local_user=YES chroot_list_enable=YES # (default follows) #chroot_list_file=/etc/vsftpd/chroot_list local_root=/var/www # # You may activate the "-R" option to the builtin ls. This is disabled by # default to avoid remote users being able to cause excessive I/O on large # sites. However, some broken FTP clients such as "ncftp" and "mirror" assume # the presence of the "-R" option, so there is a strong case for enabling it. ls_recurse_enable=YES # # When "listen" directive is enabled, vsftpd runs in standalone mode and # listens on IPv4 sockets. This directive cannot be used in conjunction # with the listen_ipv6 directive. listen=YES # # This directive enables listening on IPv6 sockets. To listen on IPv4 and IPv6 # sockets, you must run two copies of vsftpd with two configuration files. # Make sure, that one of the listen options is commented !! #listen_ipv6=YES pam_service_name=vsftpd userlist_enable=YES tcp_wrappers=YES

  Read the article

• jQuery dialog box, php form.

  - by tony noriega

  i have a dialog box that opens on pageload for a site. script type="text/javascript"> $(function() { $('#dialog-message').dialog({ modal: 'true', width: '400' }); }); </script> this pulls up an include: <div id="dialog-message" title="Free Jiu Jitsu Session at Alliance"> <!--#include virtual="/includes/guest.php" --> guest.php has a very small form that is processed by the page itself: <?php $dbh=mysql_connect //login stuff here if (isset($_POST['submit'])) { if (!$_POST['name'] | !$_POST['email']) { echo"<div class='error'>Error<br />Please provide your Name and Email Address so we may properly contact you.</div>"; } else { $age = $_POST['age']; $name = $_POST['name']; $gender = $_POST['gender']; $email = $_POST['email']; $phone = $_POST['phone']; $comments = $_POST['comments']; $query = "INSERT INTO table here (age,name,gender,email,phone,comments) VALUES ('$age','$name','$gender','$email','$phone','$comments')"; mysql_query($query); mysql_close(); $yoursite = "my site here"; $youremail = $email; $subject = "Website Guest Contact Us Form"; $message = "message here"; $email2 = "send to email address"; mail($email2, $subject, $message, "From: $email"); echo"<div class='thankyou'>Thank you for contacting us,<br /> we will respond as soon as we can.</div>"; } } ?> <form id="contact_us" class="guest" method="post" action="/guest.php" > <fieldset> <legend>Personal Info</legend> <label for="name" class="guest">Name:</label> <input type="text" name="name" id="name" value="" /><br> <label for="phone" class="guest">Phone:</label> <input type="text" name="phone" id="phone" value="" /><br> <label for="email" class="guest">Email Address:</label> <input type="text" name="email" id="email" value="" /><br> <label for="age" class="guest">Age:</label> <input type="text" name="age" id="age" value="" size="2" /><br> <label for="gender" class="guest">Sex:</label> <input type="radio" name="gender" value="male" /> Male <input type="radio" name="gender" value="female" /> Female<br /> </fieldset> <fieldset> <legend>Comments</legend> <label for="comments" class="guest">Comments / Questions:</label> <textarea id="comments" name="comments" rows="4" cols="22"></textarea><br> <input type="submit" value="Submit" name="submit" /> <input type="Reset" value="Reset" /> </fieldset> </form> Problem is, that the path of the form action does not work, becasue this dialog box is on the index.html page of the site, and if i put the absolute path, it doesnt process... i have this functioning on another contact us page, so i know it works, but wit the dialog box, it seems to have stumped me... what should i do?

  Read the article

• How do I use connect to DB2 with DBI and mod_perl?

  - by Matthew

  I'm having issues with getting DBI's IBM DB2 driver to work with mod_perl. My test script is: #!/usr/bin/perl use strict; use CGI; use Data::Dumper; use DBI; { my $q; my $dsn; my $username; my $password; my $sth; my $dbc; my $row; $q = CGI->new; print $q->header; print $q->start_html(); $dsn = "DBI:DB2:SAMPLE"; $username = "username"; $password = "password"; print "<pre>".$q->escapeHTML(Dumper(\%ENV))."</pre>"; $dbc = DBI->connect($dsn, $username, $password); $sth = $dbc->prepare("SELECT * FROM SOME_TABLE WHERE FIELD='SOMETHING'"); $sth->execute(); $row = $sth->fetchrow_hashref(); print "<pre>".$q->escapeHTML(Dumper($row))."</pre>"; print $q->end_html; } This script works as CGI but not under mod_perl. I get this error in apache's error log: DBD::DB2::dr connect warning: [unixODBC][Driver Manager]Data source name not found, and no default driver specified at /usr/lib/perl5/site_perl/5.8.8/Apache/DBI.pm line 190. DBI connect('SAMPLE','username',...) failed: [unixODBC][Driver Manager]Data source name not found, and no default driver specified at /data/www/perl/test.pl line 15 First of all, why is it using ODBC? The native DB2 driver is installed (hence it works as CGI). Running Apache 2.2.3, mod_perl 2.0.4 under RHEL5. This guy had the same problem as me: http://www.mail-archive.com/[email protected]/msg22909.html But I have no idea how he fixed it. What does mod_php4 have to do with mod_perl? Any help would be greatly appreciated, I'm having no luck with google. Update: As james2vegas pointed out, the problem has something to do with PHP: I disable PHP all together I get the a different error: Total Environment allocation failure! Did you set up your DB2 client environment? I believe this error is to do with environment variables not being set up correctly, namely DB2INSTANCE. However, I'm not able to turn off PHP to resolve this problem (I need it for some legacy applications). So I now have 2 questions: How can I fix the original issue without disabling PHP all together? How can I fix the environment issue? I've set DB2INSTANCE, DB2_PATH and SQLLIB variables correctly using SetEnv and PerlSetEnv in httpd.conf, but with no luck. Note: I've edited the code to determine if the problem was to do with Global Variable Persistence.

  Read the article

• Cannot connect to MySQL with JDBC - Connection Timeout - Ubuntu 9.04

  - by gav

  I am running Ubuntu and am ultimately trying to connect Tomcat to my MySQL database using JDBC. It has worked previously but after a reboot the instance now fails to connect. Both Tomcat 6 and MySQL 5.0.75 are on the same machine Connection string: jdbc:mysql:///localhost:3306 I can connect to MySQL on the command line using the mysql command The my.cnf file is pretty standard (Available on request) has bind address: 127.0.0.1 I cannot Telnet to the MySQL port despite netstat saying MySQL is listening I have one IpTables rule to forward 80 - 8080 and no firewall I'm aware of. I'm pretty new to this and I'm not sure what else to test. I don't know whether I should be looking in etc/interfaces and if I did what to look for. It's weird because it used to work but after a reboot it's down so I must have changed something.... :). I realise a timeout indicates the server is not responding and I assume it's because the request isn't actually getting through. I installed MySQL via apt-get and Tomcat manually. MySqld processes root@88:/var/log/mysql# ps -ef | grep mysqld root 21753 1 0 May27 ? 00:00:00 /bin/sh /usr/bin/mysqld_safe mysql 21792 21753 0 May27 ? 00:00:00 /usr/sbin/mysqld --basedir=/usr --datadir=/var/lib/mysql --user=mysql --pid-file=/var/run/mysqld/mysqld.pid --skip-external-locking --port=3306 --socket=/var/run/mysqld/mysqld.sock root 21793 21753 0 May27 ? 00:00:00 logger -p daemon.err -t mysqld_safe -i -t mysqld root 21888 13676 0 11:23 pts/1 00:00:00 grep mysqld Netstat root@88:/var/log/mysql# netstat -lnp | grep mysql tcp 0 0 0.0.0.0:3306 0.0.0.0:* LISTEN 21792/mysqld unix 2 [ ACC ] STREAM LISTENING 1926205077 21792/mysqld /var/run/mysqld/mysqld.sock Toy Connection Class root@88:~# cat TestConnect/TestConnection.java import java.sql.Connection; import java.sql.DriverManager; import java.sql.SQLException; public class TestConnection { public static void main(String args[]) throws Exception { Connection con = null; try { Class.forName("com.mysql.jdbc.Driver").newInstance(); System.out.println("Got driver"); con = DriverManager.getConnection( "jdbc:mysql:///localhost:3306", "uname", "pass"); System.out.println("Got connection"); if(!con.isClosed()) System.out.println("Successfully connected to " + "MySQL server using TCP/IP..."); } finally { if(con != null) con.close(); } } } Toy Connection Class Output Note: This is the same error I get from Tomcat. root@88:~/TestConnect# java -cp mysql-connector-java-5.1.12-bin.jar:. TestConnection Got driver Exception in thread "main" com.mysql.jdbc.exceptions.jdbc4.CommunicationsException: Communications link failure The last packet sent successfully to the server was 1 milliseconds ago. The driver has not received any packets from the server. at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method) at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39) at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27) at java.lang.reflect.Constructor.newInstance(Constructor.java:513) at com.mysql.jdbc.Util.handleNewInstance(Util.java:409) at com.mysql.jdbc.SQLError.createCommunicationsException(SQLError.java:1122) at TestConnection.main(TestConnection.java:14) Caused by: com.mysql.jdbc.exceptions.jdbc4.CommunicationsException: Communications link failure The last packet sent successfully to the server was 0 milliseconds ago. The driver has not received any packets from the server. at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method) at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39) at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27) at java.lang.reflect.Constructor.newInstance(Constructor.java:513) at com.mysql.jdbc.Util.handleNewInstance(Util.java:409) at com.mysql.jdbc.SQLError.createCommunicationsException(SQLError.java:1122) at com.mysql.jdbc.MysqlIO.<init>(MysqlIO.java:344) at com.mysql.jdbc.ConnectionImpl.createNewIO(ConnectionImpl.java:2181) ... 12 more Caused by: java.net.ConnectException: Connection timed out at java.net.PlainSocketImpl.socketConnect(Native Method) ... 13 more Telnet Output root@88:~/TestConnect# telnet localhost 3306 Trying 127.0.0.1... telnet: Unable to connect to remote host: Connection timed out

  Read the article

• ubuntu ssh does not connect

  - by bocca

  SSH won't be able to establish a connection to our server Here's the output of ssh -vvv: ssh -v -v -v 11.11.11.11 OpenSSH_5.1p1 Debian-6ubuntu2, OpenSSL 0.9.8g 19 Oct 2007 debug1: Reading configuration data /etc/ssh/ssh_config debug1: Applying options for * debug2: ssh_connect: needpriv 0 debug1: Connecting to 11.11.11.11 [11.11.11.11] port 22. debug1: Connection established. debug1: permanently_set_uid: 0/0 debug1: identity file /root/.ssh/identity type -1 debug1: identity file /root/.ssh/id_rsa type -1 debug1: identity file /root/.ssh/id_dsa type -1 debug1: Remote protocol version 2.0, remote software version OpenSSH_5.1p1 Debian-5ubuntu1 debug1: match: OpenSSH_5.1p1 Debian-5ubuntu1 pat OpenSSH* debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_5.1p1 Debian-6ubuntu2 debug2: fd 3 setting O_NONBLOCK debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug2: kex_parse_kexinit: diffie-hellman-group-exchange-sha256,diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellman-group1-sha1 debug2: kex_parse_kexinit: ssh-rsa,ssh-dss debug2: kex_parse_kexinit: aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour128,arcfour256,arcfour,aes192-cbc,aes256-cbc,[email protected],aes128-ctr,aes192-ctr,aes256-ctr debug2: kex_parse_kexinit: aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour128,arcfour256,arcfour,aes192-cbc,aes256-cbc,[email protected],aes128-ctr,aes192-ctr,aes256-ctr debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: none,[email protected],zlib debug2: kex_parse_kexinit: none,[email protected],zlib debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: first_kex_follows 0 debug2: kex_parse_kexinit: reserved 0 debug2: kex_parse_kexinit: diffie-hellman-group-exchange-sha256,diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellman-group1-sha1 debug2: kex_parse_kexinit: ssh-rsa,ssh-dss debug2: kex_parse_kexinit: aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour128,arcfour256,arcfour,aes192-cbc,aes256-cbc,[email protected],aes128-ctr,aes192-ctr,aes256-ctr debug2: kex_parse_kexinit: aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour128,arcfour256,arcfour,aes192-cbc,aes256-cbc,[email protected],aes128-ctr,aes192-ctr,aes256-ctr debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: none,[email protected] debug2: kex_parse_kexinit: none,[email protected] debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: first_kex_follows 0 debug2: kex_parse_kexinit: reserved 0 debug2: mac_setup: found hmac-md5 debug1: kex: server->client aes128-cbc hmac-md5 none debug2: mac_setup: found hmac-md5 debug1: kex: client->server aes128-cbc hmac-md5 none debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP debug2: dh_gen_key: priv key bits set: 133/256 debug2: bits set: 486/1024 debug1: SSH2_MSG_KEX_DH_GEX_INIT sent debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY debug3: check_host_in_hostfile: filename /root/.ssh/known_hosts debug3: check_host_in_hostfile: match line 1 debug1: Host '11.11.11.11' is known and matches the RSA host key. debug1: Found key in /root/.ssh/known_hosts:1 debug2: bits set: 497/1024 debug1: ssh_rsa_verify: signature correct debug2: kex_derive_keys debug2: set_newkeys: mode 1 debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug2: set_newkeys: mode 0 debug1: SSH2_MSG_NEWKEYS received debug1: SSH2_MSG_SERVICE_REQUEST sent debug2: service_accept: ssh-userauth debug1: SSH2_MSG_SERVICE_ACCEPT received debug2: key: /root/.ssh/identity ((nil)) debug2: key: /root/.ssh/id_rsa ((nil)) debug2: key: /root/.ssh/id_dsa ((nil)) debug1: Authentications that can continue: publickey,password debug3: start over, passed a different list publickey,password debug3: preferred gssapi-keyex,gssapi-with-mic,gssapi,publickey,keyboard-interactive,password debug3: authmethod_lookup publickey debug3: remaining preferred: keyboard-interactive,password debug3: authmethod_is_enabled publickey debug1: Next authentication method: publickey debug1: Trying private key: /root/.ssh/identity debug3: no such identity: /root/.ssh/identity debug1: Trying private key: /root/.ssh/id_rsa debug3: no such identity: /root/.ssh/id_rsa debug1: Trying private key: /root/.ssh/id_dsa debug3: no such identity: /root/.ssh/id_dsa debug2: we did not send a packet, disable method debug3: authmethod_lookup password debug3: remaining preferred: ,password debug3: authmethod_is_enabled password debug1: Next authentication method: password [email protected]'s password: debug3: packet_send2: adding 64 (len 57 padlen 7 extra_pad 64) debug2: we sent a password packet, wait for reply debug1: Authentication succeeded (password). debug1: channel 0: new [client-session] debug3: ssh_session2_open: channel_new: 0 debug2: channel 0: send open debug1: Requesting [email protected] debug1: Entering interactive session. debug2: callback start debug2: client_session2_setup: id 0 debug2: channel 0: request pty-req confirm 1 debug3: tty_make_modes: ospeed 38400 debug3: tty_make_modes: ispeed 38400 debug1: Sending environment. debug3: Ignored env ORBIT_SOCKETDIR debug3: Ignored env SSH_AGENT_PID debug3: Ignored env SHELL debug3: Ignored env TERM debug3: Ignored env XDG_SESSION_COOKIE debug3: Ignored env GTK_RC_FILES debug3: Ignored env WINDOWID debug3: Ignored env USER debug3: Ignored env LS_COLORS debug3: Ignored env GNOME_KEYRING_SOCKET debug3: Ignored env SSH_AUTH_SOCK debug3: Ignored env USERNAME debug3: Ignored env SESSION_MANAGER debug3: Ignored env MAIL debug3: Ignored env PATH debug3: Ignored env DESKTOP_SESSION debug3: Ignored env PWD debug3: Ignored env GDM_KEYBOARD_LAYOUT debug3: Ignored env GNOME_KEYRING_PID debug1: Sending env LANG = en_CA.UTF-8 debug2: channel 0: request env confirm 0 debug3: Ignored env GDM_LANG debug3: Ignored env GDMSESSION debug3: Ignored env HISTCONTROL debug3: Ignored env SPEECHD_PORT debug3: Ignored env HOME debug3: Ignored env SHLVL debug3: Ignored env GNOME_DESKTOP_SESSION_ID debug3: Ignored env LOGNAME debug3: Ignored env XDG_DATA_DIRS debug3: Ignored env DBUS_SESSION_BUS_ADDRESS debug3: Ignored env LESSOPEN debug3: Ignored env DISPLAY debug3: Ignored env LESSCLOSE debug3: Ignored env XAUTHORITY debug3: Ignored env COLORTERM debug3: Ignored env _ debug2: channel 0: request shell confirm 1 debug2: fd 3 setting TCP_NODELAY debug2: callback done debug2: channel 0: open confirm rwindow 0 rmax 32768 debug2: channel_input_confirm: type 99 id 0 debug2: PTY allocation request accepted on channel 0 debug2: channel 0: rcvd adjust 2097152 debug2: channel_input_confirm: type 99 id 0 debug2: shell request accepted on channel 0

  Read the article

• LDAP over SSL with an EFI Fiery printer

  - by austinian

  I've got a printer with a Fiery running 8e Release 2. I can authenticate users against AD using the LDAP configuration, but I can only get it to work if I don't use SSL/TLS, and only if I use SIMPLE authentication. Right now, it's authenticating using a fairly low-impact user, but it's also the only system on our network that's not using LDAPS. I can get AD info fine over LDAPS using ldp.exe from my machine, our firewall, our mail filter, our linux boxes, etc. The only problem child is the Fiery. I've added the LDAP server certificate as a trusted cert to the Fiery, but after I check the box for Secure Communication and change the port to 636, pressing Validate results in a dialog box coming up saying: LDAP Validation Failed Server Name invalid or server is unavailable. I've tried changing the server name to use just the name, the FQDN, and the IP address, and changed it to another server, just to see if it was just this AD server that was fussy with the Fiery. EDIT: removed LDP output, added packet capture analysis from wireshark: The conversation seems pretty normal to me, up to the point where the Fiery terminates the connection after the server sends back a handshake response. Maybe they messed up their TLS implementation? I'm trying support, but it's been fairly useless so far. The cert is a SHA-2 (sha256RSA) 2048-bit certificate. Also, it looks like the Fiery is specifying TLS 1.0. Looking at http://msdn.microsoft.com/en-us/library/windows/desktop/aa374757(v=vs.85).aspx, I'm not seeing SHA256 and TLS 1.0 combination being supported by SChannel. headdesk perhaps that's why, after the DC changes the cipher spec, the connection is terminated by the Fiery? TLS 1.1 and 1.2 are enabled on the DC. Wireshark conversation: DC: 172.17.2.22, Fiery: 172.17.2.42 No. Time Source Source Port Destination Destination Port Protocol Length Info 1 0.000000000 172.17.2.42 48633 172.17.2.22 ldaps TCP 74 48633 > ldaps [SYN] Seq=0 Win=5840 Len=0 MSS=1460 SACK_PERM=1 TSval=3101761 TSecr=0 WS=4 2 0.000182000 Dell_5e:94:e3 Broadcast ARP 60 Who has 172.17.2.42? Tell 172.17.2.22 3 0.000369000 TyanComp_c9:0f:90 Dell_5e:94:e3 ARP 60 172.17.2.42 is at 00:e0:81:c9:0f:90 4 0.000370000 172.17.2.22 ldaps 172.17.2.42 48633 TCP 74 ldaps > 48633 [SYN, ACK] Seq=0 Ack=1 Win=8192 Len=0 MSS=1460 WS=256 SACK_PERM=1 TSval=67970573 TSecr=3101761 5 0.000548000 172.17.2.42 48633 172.17.2.22 ldaps TCP 66 48633 > ldaps [ACK] Seq=1 Ack=1 Win=5840 Len=0 TSval=3101761 TSecr=67970573 6 0.001000000 172.17.2.42 48633 172.17.2.22 ldaps TLSv1 147 Client Hello 7 0.001326000 172.17.2.22 ldaps 172.17.2.42 48633 TCP 1514 [TCP segment of a reassembled PDU] 8 0.001513000 172.17.2.22 ldaps 172.17.2.42 48633 TCP 1514 [TCP segment of a reassembled PDU] 9 0.001515000 172.17.2.42 48633 172.17.2.22 ldaps TCP 66 48633 > ldaps [ACK] Seq=82 Ack=1449 Win=8736 Len=0 TSval=3101761 TSecr=67970573 10 0.001516000 172.17.2.42 48633 172.17.2.22 ldaps TCP 66 48633 > ldaps [ACK] Seq=82 Ack=2897 Win=11632 Len=0 TSval=3101761 TSecr=67970573 11 0.001732000 172.17.2.22 ldaps 172.17.2.42 48633 TCP 1514 [TCP segment of a reassembled PDU] 12 0.001737000 172.17.2.22 ldaps 172.17.2.42 48633 TLSv1 1243 Server Hello, Certificate, Certificate Request, Server Hello Done 13 0.001738000 172.17.2.42 48633 172.17.2.22 ldaps TCP 66 48633 > ldaps [ACK] Seq=82 Ack=4345 Win=14528 Len=0 TSval=3101761 TSecr=67970573 14 0.001739000 172.17.2.42 48633 172.17.2.22 ldaps TCP 66 48633 > ldaps [ACK] Seq=82 Ack=5522 Win=17424 Len=0 TSval=3101761 TSecr=67970573 15 0.002906000 172.17.2.42 48633 172.17.2.22 ldaps TLSv1 78 Certificate 16 0.004155000 172.17.2.42 48633 172.17.2.22 ldaps TLSv1 333 Client Key Exchange 17 0.004338000 172.17.2.22 ldaps 172.17.2.42 48633 TCP 66 ldaps > 48633 [ACK] Seq=5522 Ack=361 Win=66304 Len=0 TSval=67970573 TSecr=3101762 18 0.004338000 172.17.2.42 48633 172.17.2.22 ldaps TLSv1 72 Change Cipher Spec 19 0.005481000 172.17.2.42 48633 172.17.2.22 ldaps TLSv1 327 Encrypted Handshake Message 20 0.005645000 172.17.2.22 ldaps 172.17.2.42 48633 TCP 66 ldaps > 48633 [ACK] Seq=5522 Ack=628 Win=66048 Len=0 TSval=67970574 TSecr=3101762 21 0.010247000 172.17.2.22 ldaps 172.17.2.42 48633 TLSv1 125 Change Cipher Spec, Encrypted Handshake Message 22 0.016451000 172.17.2.42 48633 172.17.2.22 ldaps TCP 66 48633 > ldaps [FIN, ACK] Seq=628 Ack=5581 Win=17424 Len=0 TSval=3101765 TSecr=67970574 23 0.016630000 172.17.2.22 ldaps 172.17.2.42 48633 TCP 66 ldaps > 48633 [ACK] Seq=5581 Ack=629 Win=66048 Len=0 TSval=67970575 TSecr=3101765 24 0.016811000 172.17.2.22 ldaps 172.17.2.42 48633 TCP 60 ldaps > 48633 [RST, ACK] Seq=5581 Ack=629 Win=0 Len=0

  Read the article

• How can I get Firefox to update background-color on a:hover *before* a javascript routine is run?

  - by Rob

  I'm having a Firefox-specific issue with a script I wrote to create 3d layouts. The correct behavior is that the script pulls the background-color from an element and then uses that color to draw on the canvas. When a user mouses over a link and the background-color changes to the :hover rule, the color being drawn changes on the canvas changes as well. When the user mouses out, the color should revert back to non-hover color. This works as expected in Webkit browsers and Opera, but it seems like Firefox doesn't update the background-color in CSS immediately after a mouseout event occurs, so the current background-color doesn't get drawn if a mouseout occurs and it isn't followed up by another event that calls the draw() routine. It works just fine in Opera, Chrome, and Safari. How can I get Firefox to cooperate? I'm including the code that I believe is most relevant to my problem. Any advice on how I fix this problem and get a consistent effect would be very helpful. function drawFace(coord, mid, popColor,gs,x1,x2,side) { /*Gradients in our case run either up/down or left right. We have two algorithms depending on whether or not it's a sideways facing piece. Rather than parse the "rgb(r,g,b)" string(popColor) retrieved from elsewhere, it is simply offset with the gs variable to give the illusion that it starts at a darker color.*/ var canvas = document.getElementById('depth'); //This is for excanvas.js var G_vmlCanvasManager; if (G_vmlCanvasManager != undefined) { // ie IE G_vmlCanvasManager.initElement(canvas); } //Init canvas if (canvas.getContext) { var ctx = canvas.getContext('2d'); if (side) var lineargradient=ctx.createLinearGradient(coord[x1][0]+gs,mid[1],mid[0],mid[1]); else var lineargradient=ctx.createLinearGradient(coord[0][0],coord[2][1]+gs,coord[0][0],mid[1]); lineargradient.addColorStop(0,popColor); lineargradient.addColorStop(1,'black'); ctx.fillStyle=lineargradient; ctx.beginPath(); //Draw from one corner to the midpoint, then to the other corner, //and apply a stroke and a fill. ctx.moveTo(coord[x1][0],coord[x1][1]); ctx.lineTo(mid[0],mid[1]); ctx.lineTo(coord[x2][0],coord[x2][1]); ctx.stroke(); ctx.fill(); } } function draw(e) { var arr = new Array() var i = 0; var mid = new Array(2); $(".pop").each(function() { mid[0]=Math.round($(document).width()/2); mid[1]=Math.round($(document).height()/2); arr[arr.length++]=new getElemProperties(this,mid); i++; }); arr.sort(sortByDistance); clearCanvas(); for (a=0;a<i;a++) { /*In the following conditional statements, we're testing to see which direction faces should be drawn, based on a 1-point perspective drawn from the midpoint. In the first statement, we're testing to see if the lower-left hand corner coord[3] is higher on the screen than the midpoint. If so, we set it's gradient starting position to start at a point in space 60pixels higher(-60) than the actual side, and we also declare which corners make up our face, in this case the lower two corners, coord[3], and coord[2].*/ if (arr[a].bottomFace) drawFace(arr[a].coord,mid,arr[a].popColor,-60,3,2); if (arr[a].topFace) drawFace(arr[a].coord,mid,arr[a].popColor,60,0,1); if (arr[a].leftFace) drawFace(arr[a].coord,mid,arr[a].popColor,60,0,3,true); if (arr[a].rightFace) drawFace(arr[a].coord,mid,arr[a].popColor,-60,1,2,true); } } $("a.pop").bind("mouseenter mouseleave focusin focusout",draw); If you need to see the effect in action, or if you want the full javascript code, you can check it out here: http://www.robnixondesigns.com/strangematter/

  Read the article

• jQuery programmatically removing validation highlighting

  - by Sam Carleton

  The form has two check boxes (cbDeclined & cbIsOOfFac), two text fields and a drop down (txtHeight, txtWeight, ddlDevice). If either check box is checked, then the other controls are disabled and the rules for the other do no apply. Here are the current rules: $('form').validate({ highlight: function (element, errorClass) { $(element).addClass("invalidElem"); }, unhighlight: function (element, errorClass) { $(element).removeClass("invalidElem"); }, errorPlacement: function (error, element) { var parent = element.parent(); parent.append(error); }, errorElement: "div", errorClass: "errorMsg" }); function HeightWeightCtrlsEnabled() { return !cbDeclined.is(':checked') && !cbIsOOfFac.is(':checked'); } txtHeight.rules("add", { required: function (element) { return HeightWeightCtrlsEnabled(); }, maxlength: 3, min: 1, digits: true }); txtWeight.rules("add", { required: function (element) { return HeightWeightCtrlsEnabled(); }, maxlength: 4, min: 1, digits: true }); ddlDevice.rules("add", { required: function (element) { return HeightWeightCtrlsEnabled(); } }); function UpdateTextBoxes() { var disableCtrls = !HeightWeightCtrlsEnabled(); txtHeight.prop('disabled', disableCtrls); txtWeight.prop('disabled', disableCtrls); ddlDevice.prop('disabled', disableCtrls); if (disableCtrls) { txtHeight.val(''); txtWeight.val(''); ddlDevice.val(''); } } cbDeclined.click(function () { if (cbDeclined.is(':checked')) cbIsOOfFac.attr('checked', false); UpdateTextBoxes(); }); cbIsOOfFac.click(function () { if (cbIsOOfFac.is(':checked')) cbDeclined.attr('checked', false); UpdateTextBoxes(); }); The problem comes in when: The user enters something into txtWeight, clicks the submit to get both ddlDevice & txtHeight to highlight because they are required, then... The user clicks on either cbDeclined & cbIsOOfFac. The highlight is NOT going away. I am trying to figure out how to get the highlighting around the height and drop down to go away. I tried to create a fully working jsFiddler, but I cannot get anything to work, though everything looks correct. here is the link (I cannot post links, so I expanded it a bit) jsfiddle dot net/scarleton/9hDZQ/12/ If you remove the last /12/, you will see my first version that is a cut/paste from the real thing. Per a suggestion I tried adding $('form').valid(); a number of places. When I added it to the end of the UpdateTextBoxes() function, they started out highlighted, not what I want. When I added it after the click() event of either of the radio button, the text would go away, but the actual controls stayed highlighted. It looks like the function on the required property of the rule is not fully working, maybe. What is really interesting is this: When I enter a height, click , then weight and device are highlighted and have the error message under them. When I click on one of the radio buttons, the text goes away, but the highlight does not. But... The height is NOT highlighted, it stays normal.

  Read the article

• Unusually high memory usage on a CentOS VPS with 512 guaranteed RAM

  - by Andrei Bârsan

  I'm working on a medium-sized web application written in PHP that's running on a VPS with 512mb ram. The webapp hasn't been officially launched yet, so there isn't too much traffic going on, just me and a few other people working on it. There is another slightly smaller webapp also hosted on this machine, among 4-5 other small static sites. We are running Centos 5 32-bit & cPanel/WHM. This is the result of running ps aux and, as you can see, it's not using 100% of the RAM. However, on the hypanel overview, it's always shown as using aroun 500MB ram, just for running apache, mysql, and the lowest-memory-footprint versions of the mail server, ftp server etc. -bash-3.2# ps aux USER PID %CPU %MEM VSZ RSS TTY STAT START TIME COMMAND root 1 0.0 0.0 2156 664 ? Ss 12:08 0:00 init [3] root 1123 0.0 0.0 2260 548 ? S<s 12:08 0:00 /sbin/udevd -d root 1462 0.0 0.0 1812 568 ? Ss 12:08 0:00 syslogd -m 0 named 1496 0.0 0.0 3808 820 ? Ss 12:08 0:00 nsd named 1497 0.0 0.0 10672 756 ? S 12:08 0:00 nsd named 1499 0.0 0.0 3880 584 ? S 12:08 0:00 nsd root 1514 0.0 0.1 7240 1064 ? Ss 12:08 0:00 /usr/sbin/sshd root 1522 0.0 0.0 2832 832 ? Ss 12:08 0:00 xinetd -stayalive -pidfile /var/run/xinetd.pid root 1534 0.0 0.1 3712 1328 ? S 12:08 0:00 /bin/sh /usr/bin/mysqld_safe --datadir=/var/lib/mysql - mysql 1667 0.0 2.9 225680 30884 ? Sl 12:08 0:00 /usr/sbin/mysqld --basedir=/ --datadir=/var/lib/mysql - mailnull 1766 0.0 0.1 9352 1100 ? Ss 12:08 0:00 /usr/sbin/exim -bd -q60m root 1797 0.0 0.0 2156 708 ? Ss 12:08 0:00 /usr/sbin/dovecot root 1798 0.0 0.0 2632 1012 ? S 12:08 0:00 dovecot-auth root 1816 0.0 3.0 38580 32456 ? Ss 12:08 0:01 /usr/local/bin/spamd -d --allowed-ips=127.0.0.1 --pidfi root 1839 0.0 1.6 63200 17496 ? Ss 12:08 0:00 /usr/local/apache/bin/httpd -k start -DSSL root 1846 0.0 0.1 5416 1468 ? Ss 12:08 0:00 pure-ftpd (SERVER) root 1848 0.0 0.1 6212 1244 ? S 12:08 0:00 /usr/sbin/pure-authd -s /var/run/ftpd.sock -r /usr/sbin root 1856 0.0 0.1 4492 1112 ? Ss 12:08 0:00 crond root 1864 0.0 0.0 2356 428 ? Ss 12:08 0:00 /usr/sbin/atd dovecot 1927 0.0 0.1 5196 1952 ? S 12:08 0:00 pop3-login dovecot 1928 0.0 0.1 5196 1948 ? S 12:08 0:00 pop3-login dovecot 1929 0.0 0.1 5316 2012 ? S 12:08 0:00 imap-login dovecot 1930 0.0 0.2 5416 2228 ? S 12:08 0:00 imap-login root 1939 0.0 0.1 3936 1964 ? S 12:08 0:00 cPhulkd - processor root 1963 0.0 0.8 15876 8564 ? S 12:08 0:00 cpsrvd (SSL) - waiting for connections root 1966 0.0 0.7 15172 7748 ? S 12:08 0:00 cpdavd - accepting connections on 2077 and 2078 root 1990 0.0 0.2 5008 3136 ? S 12:08 0:00 queueprocd - wait to process a task root 2017 0.0 2.9 38580 31020 ? S 12:08 0:00 spamd child root 2018 0.0 0.5 8904 5636 ? S 12:08 0:00 /usr/bin/perl /usr/local/cpanel/bin/leechprotect nobody 2021 0.0 3.2 66512 33724 ? S 12:08 0:00 /usr/local/apache/bin/httpd -k start -DSSL nobody 2022 0.0 3.1 67812 33024 ? S 12:08 0:00 /usr/local/apache/bin/httpd -k start -DSSL nobody 2024 0.0 1.9 64364 20680 ? S 12:08 0:00 /usr/local/apache/bin/httpd -k start -DSSL root 2027 0.0 0.4 9000 4540 ? S 12:08 0:00 tailwatchd root 2032 0.0 0.1 4176 1836 ? SN 12:08 0:00 cpanellogd - sleeping for logs nobody 3096 0.0 1.9 64572 20264 ? S 12:09 0:00 /usr/local/apache/bin/httpd -k start -DSSL nobody 3097 0.0 2.8 66008 30136 ? S 12:09 0:00 /usr/local/apache/bin/httpd -k start -DSSL nobody 3098 0.0 2.8 65704 29752 ? S 12:09 0:00 /usr/local/apache/bin/httpd -k start -DSSL nobody 3099 0.0 3.1 67260 32816 ? S 12:09 0:00 /usr/local/apache/bin/httpd -k start -DSSL andrei 3448 0.0 0.1 3204 1632 ? S 12:50 0:00 imap nobody 3537 0.0 1.9 64308 20108 ? S 13:01 0:00 /usr/local/apache/bin/httpd -k start -DSSL nobody 3614 0.0 1.9 64576 20628 ? S 13:10 0:00 /usr/local/apache/bin/httpd -k start -DSSL nobody 3615 0.0 1.3 63200 14672 ? S 13:10 0:00 /usr/local/apache/bin/httpd -k start -DSSL root 3626 0.0 0.2 10232 2964 ? Rs 13:14 0:00 sshd: root@pts/0 root 3648 0.0 0.1 3844 1600 pts/0 Ss 13:14 0:00 -bash root 3826 0.0 0.0 2532 908 pts/0 R+ 13:21 0:00 ps aux Lately, without any significant changes to the configuration, the memory usage started peaking and going over 512, causing the virtual server to kill apache, basically murdering our site in the process. Do you have any idea if this is normal and more resources should be acquired? I don't think... since there isn't too much data or traffic online yet.

  Read the article

• vsftpd not allowing uploads. 550 response.

  - by Josh

  I've set vsftpd up on a centos box. I keep trying to upload files but I keep getting "550 Failed to change directory" and "550 Could not get file size." Here's my vsftpd.conf # The default compiled in settings are fairly paranoid. This sample file # loosens things up a bit, to make the ftp daemon more usable. # Please see vsftpd.conf.5 for all compiled in defaults. # # READ THIS: This example file is NOT an exhaustive list of vsftpd options. # Please read the vsftpd.conf.5 manual page to get a full idea of vsftpd's # capabilities. # # Allow anonymous FTP? (Beware - allowed by default if you comment this out). anonymous_enable=YES # # Uncomment this to allow local users to log in. local_enable=YES # # Uncomment this to enable any form of FTP write command. write_enable=YES # # Default umask for local users is 077. You may wish to change this to 022, # if your users expect that (022 is used by most other ftpd's) local_umask=022 # # Uncomment this to allow the anonymous FTP user to upload files. This only # has an effect if the above global write enable is activated. Also, you will # obviously need to create a directory writable by the FTP user. anon_upload_enable=YES # # Uncomment this if you want the anonymous FTP user to be able to create # new directories. anon_mkdir_write_enable=YES anon_other_write_enable=YES # # Activate directory messages - messages given to remote users when they # go into a certain directory. dirmessage_enable=YES # # The target log file can be vsftpd_log_file or xferlog_file. # This depends on setting xferlog_std_format parameter xferlog_enable=YES # # Make sure PORT transfer connections originate from port 20 (ftp-data). connect_from_port_20=YES # # If you want, you can arrange for uploaded anonymous files to be owned by # a different user. Note! Using "root" for uploaded files is not # recommended! #chown_uploads=YES #chown_username=whoever # # The name of log file when xferlog_enable=YES and xferlog_std_format=YES # WARNING - changing this filename affects /etc/logrotate.d/vsftpd.log #xferlog_file=/var/log/xferlog # # Switches between logging into vsftpd_log_file and xferlog_file files. # NO writes to vsftpd_log_file, YES to xferlog_file xferlog_std_format=NO # # You may change the default value for timing out an idle session. #idle_session_timeout=600 # # You may change the default value for timing out a data connection. #data_connection_timeout=120 # # It is recommended that you define on your system a unique user which the # ftp server can use as a totally isolated and unprivileged user. #nopriv_user=ftpsecure # # Enable this and the server will recognise asynchronous ABOR requests. Not # recommended for security (the code is non-trivial). Not enabling it, # however, may confuse older FTP clients. #async_abor_enable=YES # # By default the server will pretend to allow ASCII mode but in fact ignore # the request. Turn on the below options to have the server actually do ASCII # mangling on files when in ASCII mode. # Beware that on some FTP servers, ASCII support allows a denial of service # attack (DoS) via the command "SIZE /big/file" in ASCII mode. vsftpd # predicted this attack and has always been safe, reporting the size of the # raw file. # ASCII mangling is a horrible feature of the protocol. #ascii_upload_enable=YES #ascii_download_enable=YES # # You may fully customise the login banner string: #ftpd_banner=Welcome to blah FTP service. # # You may specify a file of disallowed anonymous e-mail addresses. Apparently # useful for combatting certain DoS attacks. #deny_email_enable=YES # (default follows) #banned_email_file=/etc/vsftpd/banned_emails # # You may specify an explicit list of local users to chroot() to their home # directory. If chroot_local_user is YES, then this list becomes a list of # users to NOT chroot(). #chroot_list_enable=YES # (default follows) #chroot_list_file=/etc/vsftpd/chroot_list # # You may activate the "-R" option to the builtin ls. This is disabled by # default to avoid remote users being able to cause excessive I/O on large # sites. However, some broken FTP clients such as "ncftp" and "mirror" assume # the presence of the "-R" option, so there is a strong case for enabling it. #ls_recurse_enable=YES # # When "listen" directive is enabled, vsftpd runs in standalone mode and # listens on IPv4 sockets. This directive cannot be used in conjunction # with the listen_ipv6 directive. listen=YES # This directive enables listening on IPv6 sockets. To listen on IPv4 and IPv6 # sockets, you must run two copies of vsftpd whith two configuration files. # Make sure, that one of the listen options is commented !! #listen_ipv6=YES pam_service_name=vsftpd userlist_enable=YES tcp_wrappers=YES log_ftp_protocol=YES banner_file=/etc/vsftpd/issue local_root=/var/www guest_enable=YES guest_username=ftpusr ftp_username=nobody

  Read the article

• Ports do not open after rules appended in iptables

  - by user2699451

  I have a server that I am trying to setup for OpenVPN. I have followed all the steps, but I see that when I try to connect to it in Windows, it doesn't allow me, it just hangs on connecting, so I did a nmap scan and I see that port 1194 is not open so naturally I append the rule to open 1194 with: iptables -A INPUT -i eth0 -p tcp --dport 1194 -j ACCEPT followed by service iptables save and service iptables restart which all executed successfully. Then I try again, but it doesn't work and another nmap scan says that port 1194 is closed. Here is the iptables configuration: # Generated by iptables-save v1.4.7 on Thu Oct 31 09:47:38 2013 *nat :PREROUTING ACCEPT [27410:3091993] :POSTROUTING ACCEPT [0:0] :OUTPUT ACCEPT [5042:376160] -A POSTROUTING -s 10.8.0.0/24 -o eth0 -j MASQUERADE -A POSTROUTING -s 10.8.0.0/24 -o eth0 -j MASQUERADE -A POSTROUTING -o eth0 -j MASQUERADE -A POSTROUTING -s 10.8.0.0/24 -o eth0 -j MASQUERADE -A POSTROUTING -s 10.8.0.0/24 -o eth0 -j MASQUERADE -A POSTROUTING -j SNAT --to-source 41.185.26.238 -A POSTROUTING -s 10.8.0.0/24 -o eth0 -j MASQUERADE -A POSTROUTING -s 10.8.0.0/24 -o eth0 -j MASQUERADE -A POSTROUTING -s 10.8.0.0/24 -o eth0 -j MASQUERADE COMMIT # Completed on Thu Oct 31 09:47:38 2013 # Generated by iptables-save v1.4.7 on Thu Oct 31 09:47:38 2013 *filter :INPUT ACCEPT [23571:2869068] :FORWARD ACCEPT [0:0] :OUTPUT ACCEPT [27558:3656524] :vl - [0:0] -A INPUT -p tcp -m tcp --dport 5252 -m comment --comment "SSH Secure" -j ACCEPT -A INPUT -p icmp -m icmp --icmp-type 8 -m state --state NEW,RELATED,ESTABLISHED -$ -A INPUT -i lo -j ACCEPT -A INPUT -m state --state RELATED,ESTABLISHED -j ACCEPT -A INPUT -p tcp -m tcp --dport 22 -m comment --comment "SSH" -j ACCEPT -A INPUT -p tcp -m tcp --dport 80 -m comment --comment "HTTP" -j ACCEPT -A INPUT -p tcp -m tcp --dport 8080 -m comment --comment "HTTPS" -j ACCEPT -A INPUT -p tcp -m tcp --dport 443 -m comment --comment "HTTP Encrypted" -j ACCEP$ -A INPUT -i eth0 -p tcp -m tcp --dport 1723 -j ACCEPT -A INPUT -i eth0 -p gre -j ACCEPT -A INPUT -p udp -m udp --dport 1194 -j ACCEPT -A FORWARD -i ppp+ -o eth0 -j ACCEPT -A FORWARD -i eth0 -o ppp+ -j ACCEPT -A FORWARD -m state --state RELATED,ESTABLISHED -j ACCEPT -A FORWARD -s 10.8.0.0/24 -j ACCEPT -A FORWARD -j REJECT --reject-with icmp-port-unreachable -A OUTPUT -p icmp -m icmp --icmp-type 0 -m state --state RELATED,ESTABLISHED -j A$ COMMIT # Completed on Thu Oct 31 09:47:38 2013 and my nmap scan from: localhost: nmap localhost Starting Nmap 5.51 ( http://nmap.org ) at 2013-10-31 09:53 SAST Nmap scan report for localhost (127.0.0.1) Host is up (0.000011s latency). Other addresses for localhost (not scanned): 127.0.0.1 Not shown: 996 closed ports PORT STATE SERVICE 22/tcp open ssh 25/tcp open smtp 443/tcp open https 1723/tcp open pptp Nmap done: 1 IP address (1 host up) scanned in 0.06 seconds remote pc: nmap [server ip] Starting Nmap 6.00 ( http://nmap.org ) at 2013-10-31 09:53 SAST Nmap scan report for rla04-nix1.wadns.net (41.185.26.238) Host is up (0.025s latency). Not shown: 858 filtered ports, 139 closed ports PORT STATE SERVICE 22/tcp open ssh 443/tcp open https 8008/tcp open http Nmap done: 1 IP address (1 host up) scanned in 15.70 seconds So, I do not know what is causing this, any assistance will be appreciated! UPDATE AFTER FIRST ANSWER::: [root@RLA04-NIX1 ~]# iptables -A FORWARD -m state --state RELATED,ESTABLISHED -j ACCEPT [root@RLA04-NIX1 ~]# iptables -A FORWARD -s 10.8.0.0/24 -j ACCEPT [root@RLA04-NIX1 ~]# iptables -A FORWARD -j REJECT [root@RLA04-NIX1 ~]# iptables -t nat -A POSTROUTING -s 10.8.0.0/24 -o eth0 -j MASQUERADE [root@RLA04-NIX1 ~]# service iptables save iptables: Saving firewall rules to /etc/sysconfig/iptables:[ OK ] [root@RLA04-NIX1 ~]# service iptables restart iptables: Flushing firewall rules: [ OK ] iptables: Setting chains to policy ACCEPT: filter nat [ OK ] iptables: Unloading modules: [ OK ] iptables: Applying firewall rules: [ OK ] [root@RLA04-NIX1 ~]# lsof -i :1194 -bash: lsof: command not found iptables -L -n Chain INPUT (policy ACCEPT) target prot opt source destination ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:5252 /* SSH Secure */ ACCEPT icmp -- 0.0.0.0/0 0.0.0.0/0 icmp type 8 state NEW,RELATED,ESTABLISHED ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 state RELATED,ESTABLISHED ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:22 /* SSH */ ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:80 /* HTTP */ ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:8080 /* HTTPS */ ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:443 /* HTTP Encrypted */ ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:1723 ACCEPT 47 -- 0.0.0.0/0 0.0.0.0/0 ACCEPT udp -- 0.0.0.0/0 0.0.0.0/0 udp dpt:1194 Chain FORWARD (policy ACCEPT) target prot opt source destination ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 state RELATED,ESTABLISHED ACCEPT all -- 10.8.0.0/24 0.0.0.0/0 REJECT all -- 0.0.0.0/0 0.0.0.0/0 reject-with icmp-port-unreachable ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 state RELATED,ESTABLISHED ACCEPT all -- 10.8.0.0/24 0.0.0.0/0 REJECT all -- 0.0.0.0/0 0.0.0.0/0 reject-with icmp-port-unreachable Chain OUTPUT (policy ACCEPT) target prot opt source destination ACCEPT icmp -- 0.0.0.0/0 0.0.0.0/0 icmp type 0 state RELATED,ESTABLISHED Chain vl (0 references) target prot opt source destination [root@RLA04-NIX1 ~]# nmap localhostt Starting Nmap 5.51 ( http://nmap.org ) at 2013-10-31 11:13 SAST remote pc nmap [server ip] Starting Nmap 6.00 ( http://nmap.org ) at 2013-10-31 11:11 SAST Nmap scan report for rla04-nix1.wadns.net (41.185.26.238) Host is up (0.020s latency). Not shown: 858 filtered ports, 139 closed ports PORT STATE SERVICE 22/tcp open ssh 443/tcp open https 8008/tcp open http Nmap done: 1 IP address (1 host up) scanned in 4.18 seconds localhost nmap localhost Starting Nmap 5.51 ( http://nmap.org ) at 2013-10-31 11:13 SAST Nmap scan report for localhost (127.0.0.1) Host is up (0.000011s latency). Other addresses for localhost (not scanned): 127.0.0.1 Not shown: 996 closed ports PORT STATE SERVICE 22/tcp open ssh 25/tcp open smtp 443/tcp open https 1723/tcp open pptp Nmap done: 1 IP address (1 host up) scanned in 0.06 seconds UPDATE AFTER SCANNING UDP PORTS Sorry, I am noob, I am still learning, but here is the output for: nmap -sU [server ip] Starting Nmap 6.00 ( http://nmap.org ) at 2013-10-31 11:33 SAST Nmap scan report for [server address] ([server ip]) Host is up (0.021s latency). Not shown: 997 open|filtered ports PORT STATE SERVICE 53/udp closed domain 123/udp closed ntp 33459/udp closed unknown Nmap done: 1 IP address (1 host up) scanned in 8.57 seconds btw, no changes have been made since post started (except for iptables changes)

  Read the article

• How to set up port forwarding and firewall settings for torrents using Transmsission on Mac OSX 10.5

  - by Liz

  I have picked up bits of advice here and there on the internet and got someway through this tortuous exercise (after it took 18 hours to download the first torrent I tried yesterday - magnet-link for a film). Where I have got stuck is with configuring the firewall on the Netgear Router but I am not sure if I have caused the problem myself by something else I have done configuring the Mac System Preferences for Security or Networking. I have been following the sections of these instructions that seem to apply, although they are written for a different OSX version (don't know which one, but the screen shots do not match what I see) and I am not wanting to set up my Mac as a server and attending to the parts that apply to port forwarding for Netgear rather than LinkSys: http://homepage.mac.com/car1son/static_port_fwd_intro.html I have been trying to follow these instructions: Instructions for DG834, DG834G, DG824M, FR114W, FM114P, FR114P, FR328S, FVL328, FVS328, FVS338, FVX538, FWAG114, FWG114P, or FVS318v3 These routers do port forwarding by assigning port numbers to a "service" associated with the application you want to run. "Rules" are set for particular services. Rules block or allow access, based on various conditions such as the time of day and the name of the service. To Create a New Inbound or Outbound Rule 1. Submit the router's address in an Internet browser. (The default is 192.168.0.1). 2. Enter the router's username and password. 3. From the main menu, click Security > Rules. 4. Click Add for inbound or outbound traffic, as appropriate to the application you are planning to run. 5. Select the Service. The services the router knows about are listed in the drop down. If the service you want is not listed, add it as described in the next section. 6. Select the Action, for example ALLOW always. 7. For Send to LAN Server, enter the IP address of the local server. Note that this is also the IP address the computers on your LAN will access. 8. For WAN User choose Any, or limit access to particular IP addresses. 9. For Log selection it is reasonable to turn logs on, especially at the beginning when you are unsure of the result of the changes you are making. Later, you may want to set logs to "Never" for performance reasons. 10. Click Apply. As noted in user manual for some models: * Consider using the Dynamic DNS feature on the Advanced menu, so that external users can find your network when the DHCP lease is renewed by your ISP. * If your own LAN server uses DHCP, and your IPs change on rebooting, consider using the Reserved IP Address feature in the LAN IP menu. To Add a Service for These Routers 1. Click Security > Services > Add Custom Service. 2. Enter any name you choose for the service. 3. Select whether the service is to use TCP or UDP. If you are unsure, select both. 4. Enter the lowest port number used by the service. 5. Enter the highest port number used. If the service uses only one port number, enter the same number. 6. Click Apply. There is no "Security - Rules" submenu in the Netgear page, so I have been trying to access "Security - Firewall Rules". I can access everthing else in the Netgear settings as Admin but I cannot get the "Firewall Rules" section to open up. (I am not 100% sure I will know exactly what to do if and when I do get it opened up!) I haven't managed to find though searching the internet any instructions that would seem to apply specifically to what I am trying to achieve, so would be very grateful if someone could either point me in the right direction or give me some advice directly. Best wishes, Liz

  Read the article

• Writing a code example

  - by Stefano Borini

  I would like to have your feedback regarding code examples. One of the most frustrating experiences I sometimes have when learning a new technology is finding useless examples. I think an example as the most precious thing that comes with a new library, language, or technology. It must be a starting point, a wise and unadulterated explanation on how to achieve a given result. A perfect example must have the following characteristics: Self contained: it should be small enough to be compiled or executed as a single program, without dependencies or complex makefiles. An example is also a strong functional test if you correctly installed the new technology. The more issues could arise, the more likely is that something goes wrong, and the more difficult is to debug and solve the situation. Pertinent: it should demonstrate one, and only one, specific feature of your software/library, involving the minimal additional behavior from external libraries. Helpful: the code should bring you forward, step by step, using comments or self-documenting code. Extensible: the example code should be a small “framework” or blueprint for additional tinkering. A learner can start by adding features to this blueprint. Recyclable: it should be possible to extract parts of the example to use in your own code Easy: An example code is not the place to show your code-fu skillz. Keep it easy. helpful acronym: SPHERE. Prototypical examples of violations of those rules are the following: Violation of self-containedness: an example spanning multiple files without any real need for it. If your example is a python program, keep everything into a single module file. Don’t sub-modularize it. In Java, try to keep everything into a single class, unless you really must partition some entity into a meaningful object you need to pass around (and java mandates one class per file, if I remember correctly). Violation of Pertinency: When showing how many different shapes you can draw, adding radio buttons and complex controls with all the possible choices for point shapes is a bad idea. You de-focalize your example code, introducing code for event handling, controls initialization etc., and this is not part the feature you want to demonstrate, they are unnecessary noise in the understanding of the crucial mechanisms providing the feature. Violation of Helpfulness: code containing dubious naming, wrong comments, hacks, and functions longer than one page of code. Violation of Extensibility: badly factored code that have everything into a single function, with potentially swappable entities embedded within the code. Example: if an example reads data from a file and displays it, create a method getData() returning a useful entity, instead of opening the file raw and plotting the stuff. This way, if the user of the library needs to read data from a HTTP server instead, he just has to modify the getData() module and use the example almost as-is. Another violation of Extensibility comes if the example code is not under a fully liberal (e.g. MIT or BSD) license. Violation of Recyclability: when the code layout is so intermingled that is difficult to easily copy and paste parts of it and recycle them into another program. Again, licensing is also a factor. Violation of Easiness: Yes, you are a functional-programming nerd and want to show how cool you are by doing everything on a single line of map, filter and so on, but that could not be helpful to someone else, who is already under pressure to understand your library, and now has to understand your code as well. And in general, the final rule: if it takes more than 10 minutes to do the following: compile the code, run it, read the source, and understand it fully, it means that the example is not a good one. Please let me know your opinion, either positive or negative, or experience on this regard.

  Read the article

• OSX Server 3, Mac clients binding to OD and Profile Manager failing

  - by dbf

  I've made a setup containing a Mac Mini with OSX Server 3 (Mavericks 10.9.2) using Open Directory and Profile Manager (Mail, etc all set up and working). Now the thing is, internally on the local network, everything works great. Clients can bind to the OD and the users are able to login. I can install trust and settings profiles (either custom or group profiles) and all services in the profiles mentioned are being configured correctly. I can log in and out, hump around and do it a 100 times on different macs with different users, it works. My goal is to make this service publicly. The domain is with a FQDN which I own, for simplicity let's say server.domain.com. Now the only way for me to bind the clients to the OD is using LDAP mapping RCF2307 (without SSL) and a DN suffix of dc=server,dc=domain,dc=com using the Directory Utility. The options from server, or open directory will throw several errors like Connection failed to node '/LDAPv3/server.domain.com (2100). First of all I don't really understand the problem why clients can't bind to the OD like it does locally, with and without SSL (all ports are open, literally all ports are open, not just 389,636 and 1640, wasn't sure if I was missing any). When the clients are using LDAP mapping RFC2307 to bind (without SSL only), clients are able to authenticate, login and even load the Trust profile. But every Settings profile will fail with a Debug Message: Unable to find GUID in user record OD or fail to install saying missing user identification. Is there any way to get this to work without RFC2307? Because there is quite some stuff missing when using RFC2307 and not pull the mapping from the server or use open directory. Is this setup even possible? Or should I use VPN to authenticate with the OD? The network setup is a Modem/Router (DHCP off) with WAN NATted to an Airport Extreme (Using DHCP+NAT). The AE does notify with a double NAT message but I haven't had any problems with it on any other service. So WAN - 192.168.2.220 (static), AE - 10.0.1.* (dhcp) Output of DIG from the outside using dig server.domain.com ;; flags: qr rd ra; QUERY: 1, ANSWER: 1, AUTHORITY: 0, ADDITIONAL: 0 ;; QUESTION SECTION: ;server.domain.com. IN A ;; ANSWER SECTION: server.domain.com. 77 IN A 91.50.*.* (valid WAN IP) ;; SERVER 172.*.*.1#53(172.*.*.1) (iPhone) DIG locally from a client and server (same output) ;; flags: qr aa rd ra; QUERY: 1, ANSWER: 1, AUTHORITY: 2, ADDITIONAL: 0 ;; QUESTION SECTION: ;server.domain.com. IN A ;; ANSWER SECTION: server.domain.com. 10800 IN A 10.0.1.11 ;; AUTHORITY SECTION: server.domain.com. 10800 IN NS domain.com. (used for email send in relay) server.domain.com. 10800 IN NS server.domain.com. ;; SERVER 10.0.1.11#53(10.0.1.11) Are there any things I should check? Only have OSX. -- double NAT issue, plugged in the server directly on the Modem/Router with a static IP and issue remains. Guess that rules out the double NAT thing. -- changeip -checkhostname comes with There is nothing to change, e.g. success. Primary address = 10.0.1.11 Current HostName = server.domain.com DNS HostName = server.domain.com For now, I've made a workaround by using an admin account that forces a permanent VPN connection on boot. That means before it comes to the login, a connection is already made or underway. I will continue this post when I have more time, also locating all the necessary .log files of each application involved. I have some suspicions but have to debug a bit more when I have more time on my hands .. Unless, of course, I get sidetracked with having a life. Which is arguably not very likely. krypted.com

  Read the article

• Ruby Gem LoadError mysql2/mysql2 required

  - by Kalli Dalli

  Im trying to setup my rails server on OSX 10.8 but I can't get my rails server to run. - Currently Im using a Zend Server with mysql 5.1. - I also have istalled brew and brew mysql. - And I used: gem install mysql2 -- --srcdir=/usr/local/mysql/include --with-opt-include=/usr/local/mysql/include the server worked already but now, I always get this loadError below. This is what my Gemfile says: ralphs-macbook-pro:admin-mockup zero$ bundle install Using rake (10.0.2) Using i18n (0.6.1) Using multi_json (1.3.7) Using activesupport (3.2.7) Using builder (3.0.4) Using activemodel (3.2.7) Using erubis (2.7.0) Using journey (1.0.4) Using rack (1.4.1) Using rack-cache (1.2) Using rack-test (0.6.2) Using hike (1.2.1) Using tilt (1.3.3) Using sprockets (2.1.3) Using actionpack (3.2.7) Using mime-types (1.19) Using polyglot (0.3.3) Using treetop (1.4.12) Using mail (2.4.4) Using actionmailer (3.2.7) Using arel (3.0.2) Using tzinfo (0.3.35) Using activerecord (3.2.7) Using activeresource (3.2.7) Using annotate (2.5.0) Using coffee-script-source (1.4.0) Using execjs (1.4.0) Using coffee-script (2.2.0) Using rack-ssl (1.3.2) Using json (1.7.5) Using rdoc (3.12) Using thor (0.16.0) Using railties (3.2.7) Using coffee-rails (3.2.2) Using columnize (0.3.6) Using debugger-ruby_core_source (1.1.5) Using debugger-linecache (1.1.2) Using debugger (1.2.2) Using formtastic (2.2.1) Using haml (3.1.7) Using haml-rails (0.3.5) Using hirb (0.7.0) Using hpricot (0.8.6) Using jquery-rails (2.1.4) Using kgio (2.7.4) Using mysql2 (0.3.11) Using php_serialize (1.2) Using polyamorous (0.5.0) Using rabl (0.7.8) Using railroady (1.1.0) Using bundler (1.2.3) Using rails (3.2.7) Using raindrops (0.10.0) Using randumb (0.3.0) Using sass (3.2.3) Using sass-rails (3.2.5) Using squeel (1.0.13) Using uglifier (1.3.0) Using unicorn (4.4.0) Your bundle is complete! Use `bundle show [gemname]` to see where a bundled gem is installed. And after starting rails s /Users/zero/.rvm/gems/ruby-1.9.3-p327/gems/mysql2-0.3.11/lib/mysql2.rb:9:in `require': cannot load such file -- mysql2/mysql2 (LoadError) from /Users/zero/.rvm/gems/ruby-1.9.3-p327/gems/mysql2-0.3.11/lib/mysql2.rb:9:in `<top (required)>' from /Users/zero/.rvm/gems/ruby-1.9.3-p327/gems/bundler-1.2.3/lib/bundler/runtime.rb:68:in `require' from /Users/zero/.rvm/gems/ruby-1.9.3-p327/gems/bundler-1.2.3/lib/bundler/runtime.rb:68:in `block (2 levels) in require' from /Users/zero/.rvm/gems/ruby-1.9.3-p327/gems/bundler-1.2.3/lib/bundler/runtime.rb:66:in `each' from /Users/zero/.rvm/gems/ruby-1.9.3-p327/gems/bundler-1.2.3/lib/bundler/runtime.rb:66:in `block in require' from /Users/zero/.rvm/gems/ruby-1.9.3-p327/gems/bundler-1.2.3/lib/bundler/runtime.rb:55:in `each' from /Users/zero/.rvm/gems/ruby-1.9.3-p327/gems/bundler-1.2.3/lib/bundler/runtime.rb:55:in `require' from /Users/zero/.rvm/gems/ruby-1.9.3-p327/gems/bundler-1.2.3/lib/bundler.rb:128:in `require' from /Users/zero/GitHub/admin-mockup/config/application.rb:7:in `<top (required)>' from /Users/zero/.rvm/gems/ruby-1.9.3-p327/gems/railties-3.2.7/lib/rails/commands.rb:53:in `require' from /Users/zero/.rvm/gems/ruby-1.9.3-p327/gems/railties-3.2.7/lib/rails/commands.rb:53:in `block in <top (required)>' from /Users/zero/.rvm/gems/ruby-1.9.3-p327/gems/railties-3.2.7/lib/rails/commands.rb:50:in `tap' from /Users/zero/.rvm/gems/ruby-1.9.3-p327/gems/railties-3.2.7/lib/rails/commands.rb:50:in `<top (required)>' from script/rails:6:in `require' from script/rails:6:in `<main>' Thx for any help!

  Read the article

• Screen Scraping HTML with C#

  - by WildBill

  I have been given the task at work of screen scraping one of our legacy web apps to extract certain data from the code. The data is formatted and "should" be displayed exactly the same every time. I am just not sure how to go about doing this. It's a full html file with header and footer navigations but in the middle of all this is the data I need. I need to extract the Company Name value, Contact Name, Telephone, email address, etc. Here is an example of what the code looks like: ...html above here <br /><br /> <table cellpadding="0" cellspacing="12" border="0"> <tr> <td valign="top" align="center"> <!-- Company Info --> <table cellpadding="0" cellspacing="0" border="0"> <tr> <td class="black"> <table cellspacing="1" cellpadding="0" border="0" width="370"> <tr> <th>ABC INDUSTRIES</th> </tr> <tr> <td class="search"> <table cellpadding="5" cellspacing="0" border="0" width="100%"> <tr> <td> <table cellpadding="1" cellspacing="0" border="0" width="100%"> <tr> <td align="center" colspan="2"><hr></td> </tr> <tr> <td align="right" nowrap><b><font color="FF0000">Contact Person&nbsp;<img src="/images/icon_contact.gif" align="absmiddle">&nbsp;:</font></b></td> <td align="left" width="100%">&nbsp;Joe Smith</td> </tr> <tr> <td align="right" nowrap><b><font color="FF0000">Phone Number&nbsp;<img src="/images/icon_phone.gif" align="absmiddle">&nbsp;:</font></b></td> <td align="left" width="100%">&nbsp;555-555-5555</td> </tr> <tr> <td align="right" nowrap><b><font color="FF0000">E-mail Address&nbsp;<img src="/images/icon_email.gif" align="absmiddle">&nbsp;:</font></b></td> <td align="left" width="100%">&nbsp;<a HREF="mailto:[email protected]">[email protected]</a></td> </tr> more... There is more code on the screen in a different table structure that I also need to pull.

  Read the article

• Can a conforming C implementation #define NULL to be something wacky

  - by janks

  I'm asking because of the discussion that's been provoked in this thread: http://stackoverflow.com/questions/2597142/when-was-the-null-macro-not-0/2597232 Trying to have a serious back-and-forth discussion using comments under other people's replies is not easy or fun. So I'd like to hear what our C experts think without being restricted to 500 characters at a time. The C standard has precious few words to say about NULL and null pointer constants. There's only two relevant sections that I can find. First: 3.2.2.3 Pointers An integral constant expression with the value 0, or such an expression cast to type void * , is called a null pointer constant. If a null pointer constant is assigned to or compared for equality to a pointer, the constant is converted to a pointer of that type. Such a pointer, called a null pointer, is guaranteed to compare unequal to a pointer to any object or function. and second: 4.1.5 Common definitions <stddef.h> The macros are NULL which expands to an implementation-defined null pointer constant; The question is, can NULL expand to an implementation-defined null pointer constant that is different from the ones enumerated in 3.2.2.3? In particular, could it be defined as: #define NULL __builtin_magic_null_pointer Or even: #define NULL ((void*)-1) My reading of 3.2.2.3 is that it specifies that an integral constant expression of 0, and an integral constant expression of 0 cast to type void* must be among the forms of null pointer constant that the implementation recognizes, but that it isn't meant to be an exhaustive list. I believe that the implementation is free to recognize other source constructs as null pointer constants, so long as no other rules are broken. So for example, it is provable that #define NULL (-1) is not a legal definition, because in if (NULL) do_stuff(); do_stuff() must not be called, whereas with if (-1) do_stuff(); do_stuff() must be called; since they are equivalent, this cannot be a legal definition of NULL. But the standard says that integer-to-pointer conversions (and vice-versa) are implementation-defined, therefore it could define the conversion of -1 to a pointer as a conversion that produces a null pointer. In which case if ((void*)-1) would evaluate to false, and all would be well. So what do other people think? I'd ask for everybody to especially keep in mind the "as-if" rule described in 2.1.2.3 Program execution. It's huge and somewhat roundabout, so I won't paste it here, but it essentially says that an implementation merely has to produce the same observable side-effects as are required of the abstract machine described by the standard. It says that any optimizations, transformations, or whatever else the compiler wants to do to your program are perfectly legal so long as the observable side-effects of the program aren't changed by them. So if you are looking to prove that a particular definition of NULL cannot be legal, you'll need to come up with a program that can prove it. Either one like mine that blatantly breaks other clauses in the standard, or one that can legally detect whatever magic the compiler has to do to make the strange NULL definition work. Steve Jessop found an example of way for a program to detect that NULL isn't defined to be one of the two forms of null pointer constants in 3.2.2.3, which is to stringize the constant: #define stringize_helper(x) #x #define stringize(x) stringize_helper(x) Using this macro, one could puts(stringize(NULL)); and "detect" that NULL does not expand to one of the forms in 3.2.2.3. Is that enough to render other definitions illegal? I just don't know. Thanks!

  Read the article

• Round-twice error in .NET's Double.ToString method

  - by Jeppe Stig Nielsen

  Mathematically, consider for this question the rational number 8725724278030350 / 2**48 where ** in the denominator denotes exponentiation, i.e. the denominator is 2 to the 48th power. (The fraction is not in lowest terms, reducible by 2.) This number is exactly representable as a System.Double. Its decimal expansion is 31.0000000000000'49'73799150320701301097869873046875 (exact) where the apostrophes do not represent missing digits but merely mark the boudaries where rounding to 15 resp. 17 digits is to be performed. Note the following: If this number is rounded to 15 digits, the result will be 31 (followed by thirteen 0s) because the next digits (49...) begin with a 4 (meaning round down). But if the number is first rounded to 17 digits and then rounded to 15 digits, the result could be 31.0000000000001. This is because the first rounding rounds up by increasing the 49... digits to 50 (terminates) (next digits were 73...), and the second rounding might then round up again (when the midpoint-rounding rule says "round away from zero"). (There are many more numbers with the above characteristics, of course.) Now, it turns out that .NET's standard string representation of this number is "31.0000000000001". The question: Isn't this a bug? By standard string representation we mean the String produced by the parameterles Double.ToString() instance method which is of course identical to what is produced by ToString("G"). An interesting thing to note is that if you cast the above number to System.Decimal then you get a decimal that is 31 exactly! See this Stack Overflow question for a discussion of the surprising fact that casting a Double to Decimal involves first rounding to 15 digits. This means that casting to Decimal makes a correct round to 15 digits, whereas calling ToSting() makes an incorrect one. To sum up, we have a floating-point number that, when output to the user, is 31.0000000000001, but when converted to Decimal (where 29 digits are available), becomes 31 exactly. This is unfortunate. Here's some C# code for you to verify the problem: static void Main() { const double evil = 31.0000000000000497; string exactString = DoubleConverter.ToExactString(evil); // Jon Skeet, http://csharpindepth.com/Articles/General/FloatingPoint.aspx Console.WriteLine("Exact value (Jon Skeet): {0}", exactString); // writes 31.00000000000004973799150320701301097869873046875 Console.WriteLine("General format (G): {0}", evil); // writes 31.0000000000001 Console.WriteLine("Round-trip format (R): {0:R}", evil); // writes 31.00000000000005 Console.WriteLine(); Console.WriteLine("Binary repr.: {0}", String.Join(", ", BitConverter.GetBytes(evil).Select(b => "0x" + b.ToString("X2")))); Console.WriteLine(); decimal converted = (decimal)evil; Console.WriteLine("Decimal version: {0}", converted); // writes 31 decimal preciseDecimal = decimal.Parse(exactString, CultureInfo.InvariantCulture); Console.WriteLine("Better decimal: {0}", preciseDecimal); // writes 31.000000000000049737991503207 } The above code uses Skeet's ToExactString method. If you don't want to use his stuff (can be found through the URL), just delete the code lines above dependent on exactString. You can still see how the Double in question (evil) is rounded and cast.

  Read the article

• VBA nested Loop flow control

  - by PCGIZMO

  I will be brief and stick to what I know. This code for the most part works as it should. The only issue is in the iteration of the x and z loop. these to loops should set the range and yLABEL for the Y loop. I can get through a set and come up with the correct range after that things go bonkers. I know some of it has to do with not breaking out of x to set z and then back to x update the range. It should work z is found then x. the range between them is set for y. then next x but y stays then rang between y and x is set for y.. so on and so forth kinda like a slinky down the stairs. or a slide rule depending on how I set the loops either way I end up all over the place after a couple iterations. I have done a few things but each time I break out of x to set z , X restarts at the top of the range. At least that's what I think I am seeing. In the example sheet i have since changed the way the way the offset works with the loop but the idea is still the same. I have goto statements at this time i was going to try figuring out conditional switches after the loops were working. Any help direction or advice is appreciated. Option Explicit Sub parse() Application.DisplayAlerts = False 'Application.EnableCancelKey = xlDisabled Dim strPath As String, strPathused As String strPath = "C:\clerk plan2" Dim objfso As FileSystemObject, objFolder As Folder, objfile As Object Set objfso = CreateObject("Scripting.FileSystemObject") Set objFolder = objfso.GetFolder(strPath) 'Loop through objWorkBooks For Each objfile In objFolder.Files If objfso.GetExtensionName(objfile.Path) = "xlsx" Then Dim objWorkbook As Workbook Set objWorkbook = Workbooks.Open(objfile.Path) ' Set path for move to at end of script strPathused = "C:\prodplan\used\" & objWorkbook.Name objWorkbook.Worksheets("inbound transfer sheet").Activate objWorkbook.Worksheets("inbound transfer sheet").Cells.UnMerge 'Range management WB Dim SRCwb As Worksheet, SRCrange1 As Range, SRCrange2 As Range, lastrow As Range Set SRCwb = objWorkbook.Worksheets("inbound transfer sheet") Set SRCrange1 = SRCwb.Range("g3:g150") Set SRCrange2 = SRCwb.Range("a1:a150") Dim DSTws As Worksheet Set DSTws = Workbooks("clerkplan2.xlsm").Worksheets("transfer") Dim STR1 As String, STR2 As String, xVAL As String, zVAL As String, xSTR As String, zSTR As String STR1 = "INBOUND TRANS" STR2 = "INBOUND CA TRANS" Dim x As Variant, z As Variant, y As Variant, zxRANGE As Range For Each z In SRCrange2 zSTR = Mid(z, 1, 16) If zSTR <> STR2 Then GoTo zNEXT If zSTR = STR2 Then zVAL = z End If For Each x In SRCrange2 xSTR = Mid(x, 1, 13) If xSTR <> STR1 Then GoTo xNEXT If xSTR = STR1 Then xVAL = x End If Dim yLABEL As String If xVAL = x And zVAL = z Then If x.Row > z.Row Then Set zxRANGE = SRCwb.Range(x.Offset(1, 0).Address & " : " & z.Offset(-1, 0).Address) yLABEL = z.Value Else Set zxRANGE = SRCwb.Range(z.Offset(-1, 0).Address & " : " & x.Offset(1, 0).Address) yLABEL = x.Value End If End If MsgBox zxRANGE.Address ' DEBUG For Each y In zxRANGE If y.Offset(0, 6) = "Temp" Or y.Offset(0, 14) = "Begin Time" Or y.Offset(0, 15) = "End Time" Or _ Len(y.Offset(0, 6)) = 0 Or Len(y.Offset(0, 14)) = 0 Or Len(y.Offset(0, 15)) = "0" Then yNEXT Set lastrow = Workbooks("clerkplan2.xlsm").Worksheets("transfer").Range("c" & DSTws.Rows.Count).End(xlUp).Offset(1, 0) y.Offset(0, 6).Copy lastrow.PasteSpecial Paste:=xlPasteValues, operation:=xlNone, skipblanks:=True, Transpose:=False DSTws.Activate ActiveCell.Offset(0, -1) = objWorkbook.Name ActiveCell.Offset(0, -2) = yLABEL objWorkbook.Activate y.Offset(0, 14).Copy Set lastrow = Workbooks("clerkplan2.xlsm").Worksheets("transfer").Range("d" & DSTws.Rows.Count).End(xlUp).Offset(1, 0) lastrow.PasteSpecial Paste:=xlPasteValues, operation:=xlNone, skipblanks:=True, Transpose:=False objWorkbook.Activate y.Offset(0, 15).Copy Set lastrow = Workbooks("clerkplan2.xlsm").Worksheets("transfer").Range("e" & DSTws.Rows.Count).End(xlUp).Offset(1, 0) lastrow.PasteSpecial Paste:=xlPasteValues, operation:=xlNone, skipblanks:=True, Transpose:=False yNEXT: Next y xNEXT: Next x zNEXT: Next z strPathused = "C:\clerk plan2\used\" & objWorkbook.Name objWorkbook.Close False 'Move proccesed file to new Dir Dim OldFilePath As String Dim NewFilePath As String OldFilePath = objfile 'original file location NewFilePath = strPathused ' new file location Name OldFilePath As NewFilePath ' move the file End If Next End Sub

  Read the article

• How to restart RoR services after server has been rebooted

  - by Alan DeLonga

  Update I have been searching around to see what services would possibly need to be restarted in my project after reboot. One of them was thinking sphinx, which I finally got to the point where it logs: [Fri Nov 16 19:34:29.820 2012] [29623] accepting connections But I still cant run searchd or searchd --stop because there was no generated sphinx.conf file in the etc/sphinxsearch for more info refer to this open thread on thinking_sphinx after reboot I then turned to looking into restarting unicorn or thin based on some insight I got. The issue is when I check my gems I see one for thin AND unicorn. But when I try to start either one of them they have no file residing in etc/init.d/ where the nginx and sphinxsearch files reside... Would rebooting totally erase the files for an app server like thin or unicorn? We are hosted on Rackspace running ruby 1.9.2p290 rails (3.2.8, 3.2.7, 3.2.0) nginx/1.1.19 notice that there are gems for unicorn and thin but there is no unicorn.rb or thin.rb in my config folder for my app... I am still super lost if any one can give me some insight on some steps to take to figure this out I would really appreciate it. Anything would help, thanks for reading. thin 1.4.1 unicorn 4.3.1 When I run unicorn I get the same issue as referenced here : > /usr/local/bin/unicorn start /usr/local/lib/ruby/gems/1.9.1/gems/unicorn-4.3.1/lib/unicorn/configurator.rb:610:in `parse_rackup_file': rackup file (start) not readable (ArgumentError) from /usr/local/lib/ruby/gems/1.9.1/gems/unicorn-4.3.1/lib/unicorn/configurator.rb:76:in `reload' from /usr/local/lib/ruby/gems/1.9.1/gems/unicorn-4.3.1/lib/unicorn/configurator.rb:67:in `initialize' from /usr/local/lib/ruby/gems/1.9.1/gems/unicorn-4.3.1/lib/unicorn/http_server.rb:104:in `new' from /usr/local/lib/ruby/gems/1.9.1/gems/unicorn-4.3.1/lib/unicorn/http_server.rb:104:in `initialize' from /usr/local/lib/ruby/gems/1.9.1/gems/unicorn-4.3.1/bin/unicorn:121:in `new' from /usr/local/lib/ruby/gems/1.9.1/gems/unicorn-4.3.1/bin/unicorn:121:in `<top (required)>' from /usr/local/bin/unicorn:19:in `load' from /usr/local/bin/unicorn:19:in `<main>' When I run thin it just opens a command line prompt... /usr/local/bin/thin start >> Using rack adapter Other gems: * LOCAL GEMS * actionmailer (3.2.8, 3.2.7, 3.2.0) actionpack (3.2.8, 3.2.7, 3.2.0) activemodel (3.2.8, 3.2.7, 3.2.0) activerecord (3.2.8, 3.2.7, 3.2.0) activeresource (3.2.8, 3.2.7, 3.2.0) activesupport (3.2.8, 3.2.7, 3.2.0) arel (3.0.2) builder (3.0.0) bundler (1.1.5) carmen (1.0.0.beta2) carmen-rails (1.0.0.beta3) cocaine (0.2.1) coffee-rails (3.2.2) coffee-script (2.2.0) coffee-script-source (1.3.3) daemons (1.1.9) erubis (2.7.0) eventmachine (0.12.10) execjs (1.4.0) faraday (0.8.4) faraday_middleware (0.8.8) foursquare2 (1.8.2) geokit (1.6.5) hashie (1.2.0) hike (1.2.1) httparty (0.8.3) httpauth (0.1) i18n (0.6.0) journey (1.0.4) jquery-rails (2.0.2) json (1.7.4, 1.7.3) jwt (0.1.5) kgio (2.7.4) lastfm (1.8.0) libv8 (3.3.10.4 x86_64-linux) mail (2.4.4) mime-types (1.19, 1.18) minitest (1.6.0) multi_json (1.3.6) multi_xml (0.5.1) multipart-post (1.1.5) mysql2 (0.3.11) oauth2 (0.8.0) paperclip (3.1.1) polyglot (0.3.3) rack (1.4.1) rack-cache (1.2) rack-ssl (1.3.2) rack-test (0.6.1) rails (3.2.8, 3.2.7, 3.2.0) railties (3.2.8, 3.2.7, 3.2.0) raindrops (0.10.0, 0.9.0) rake (0.9.2.2, 0.8.7) rdoc (3.12, 2.5.8) riddle (1.5.3) sass (3.2.0, 3.1.19) sass-rails (3.2.5) sprockets (2.1.3) sqlite3 (1.3.6) sqlite3-ruby (1.3.3) therubyracer (0.10.2, 0.10.1) thin (1.4.1) thinking-sphinx (2.0.10) thor (0.16.0, 0.15.4, 0.14.6) tilt (1.3.3) treetop (1.4.10) tzinfo (0.3.33) uglifier (1.2.7, 1.2.4) unicorn (4.3.1) xml-simple (1.1.1) I am working on a project that was built by another group. I made some modifications to a constants file in the config folder (changing some values for arrays that populated some drop down fields), but the app had to be rebooted before those changes would be recognized. The hosting is through Rackspace, we rebooted through the option on their site. I contacted them and checked the status of our server, the port is open and operational. The problem is the app is not running when you go to the address for the site. Then when I put in the ip address of the server it just says "Welcome to Nginx". But in a log files I see: [Thu Nov 15 02:34:37.945 2012] [15916] caught SIGTERM, shutting down [Thu Nov 15 02:34:37.996 2012] [15916] shutdown complete I am not very versed in server side set up. I have also never worked on a Rails project that had to have specific services started before the application will start. Any insight as to how to figure out what services need to be restarted and how to go about restarting them would be greatly appreciated. I feel kind of dead in the water at this point... Thanks, Alan

  Read the article

• Bypass cache for mobile user agents, VARNISH+NGINX+W3CACHE

  - by Mike McGhee

  Right now I'm running Wordpress w/ W3 Cache on nginx with varnish front end. I'm trying to use the WP Touch Pro plugin for wordpress to display mobile sites, but it is not working. Shows the desktop theme still. I've put the mobile user agents in the rejected user agents box in w3 cache. Here is the nginx config w3 cache spit out: BEGIN W3TC Page Cache cache location ~ /wp-content/w3tc/pgcache.*html$ { expires modified 3600s; add_header X-Powered-By "W3 Total Cache/0.9.2.4"; add_header Vary "Accept-Encoding, Cookie"; } location ~ /wp-content/w3tc/pgcache.*gzip$ { gzip off; types {} default_type text/html; expires modified 3600s; add_header X-Powered-By "W3 Total Cache/0.9.2.4"; add_header Vary "Accept-Encoding, Cookie"; add_header Content-Encoding gzip; } # END W3TC Page Cache cache # BEGIN W3TC Browser Cache gzip on; gzip_types text/css application/x-javascript text/x-component text/richtext image/svg+xml text/plain text/xsd text/xsl text/xml image/x-icon; location ~ \.(css|js|htc)$ { expires 31536000s; add_header X-Powered-By "W3 Total Cache/0.9.2.4"; } location ~ \.(html|htm|rtf|rtx|svg|svgz|txt|xsd|xsl|xml)$ { expires 3600s; add_header X-Powered-By "W3 Total Cache/0.9.2.4"; } location ~ \.(asf|asx|wax|wmv|wmx|avi|bmp|class|divx|doc|docx|eot|exe|gif|gz|gzip|ico|jpg|jpeg|jpe|mdb|mid|midi|mov|qt|mp3|m4a|mp4|m4v|mpeg|mpg|mpe|mpp|otf|odb|odc|odf|odg|odp|ods|odt|ogg|pdf|png|pot|pps|ppt|pptx|ra|ram|svg|svgz|swf|tar|tif|tiff|ttf|ttc|wav|wma|wri|xla|xls|xlsx|xlt|xlw|zip)$ { expires 31536000s; add_header X-Powered-By "W3 Total Cache/0.9.2.4"; } # END W3TC Browser Cache # BEGIN W3TC Minify core rewrite ^/wp-content/w3tc/min/w3tc_rewrite_test$ /wp-content/w3tc/min/index.php?w3tc_rewrite_test=1 last; rewrite ^/wp-content/w3tc/min/(.+\.(css|js))$ /wp-content/w3tc/min/index.php?file=$1 last; # END W3TC Minify core # BEGIN W3TC Page Cache core rewrite ^(.*\/)?w3tc_rewrite_test$ $1?w3tc_rewrite_test=1 last; set $w3tc_rewrite 1; if ($request_method = POST) { set $w3tc_rewrite 0; } if ($query_string != "") { set $w3tc_rewrite 0; } if ($http_host != "mysite.com") { set $w3tc_rewrite 0; } set $w3tc_rewrite2 1; if ($request_uri !~ \/$) { set $w3tc_rewrite2 0; } if ($request_uri ~* "(sitemap(_index)?\.xml(\.gz)?|[a-z0-9_\-]+-sitemap([0-9]+)?\.xml(\.gz)?)") { set $w3tc_rewrite2 1; } if ($w3tc_rewrite2 != 1) { set $w3tc_rewrite 0; } set $w3tc_rewrite3 1; if ($request_uri ~* "(\/wp-admin\/|\/xmlrpc.php|\/wp-(app|cron|login|register|mail)\.php|\/feed\/|wp-.*\.php|index\.php)") { set $w3tc_rewrite3 0; } if ($request_uri ~* "(wp\-comments\-popup\.php|wp\-links\-opml\.php|wp\-locations\.php)") { set $w3tc_rewrite3 1; } if ($w3tc_rewrite3 != 1) { set $w3tc_rewrite 0; } if ($http_cookie ~* "(comment_author|wp\-postpass|wordpress_\[a\-f0\-9\]\+|wordpress_logged_in)") { set $w3tc_rewrite 0; } if ($http_user_agent ~* "(W3\ Total\ Cache/0\.9\.2\.4|iphone|ipod|ipad|aspen|incognito|webmate|android|dream|cupcake|froyo|blackberry9500|blackberry9520|blackberry9530|blackberry9550|blackberry\ 9800|blackberry\ 9780|webos|s8000|bada)") { set $w3tc_rewrite 0; } set $w3tc_ua ""; if ($http_user_agent ~* "(acer\ s100|android|archos5|blackberry9500|blackberry9530|blackberry9550|blackberry\ 9800|cupcake|docomo\ ht\-03a|dream|htc\ hero|htc\ magic|htc_dream|htc_magic|incognito|ipad|iphone|ipod|kindle|lg\-gw620|liquid\ build|maemo|mot\-mb200|mot\-mb300|nexus\ one|opera\ mini|samsung\-s8000|series60.*webkit|series60/5\.0|sonyericssone10|sonyericssonu20|sonyericssonx10|t\-mobile\ mytouch\ 3g|t\-mobile\ opal|tattoo|webmate|webos)") { set $w3tc_ua _high; } set $w3tc_ref ""; set $w3tc_ssl ""; set $w3tc_enc ""; if ($http_accept_encoding ~ gzip) { set $w3tc_enc _gzip; } set $w3tc_ext ""; if (-f "$document_root/wp-content/w3tc/pgcache/$request_uri/_index$w3tc_ua$w3tc_ref$w3tc_ssl.html$w3tc_enc") { set $w3tc_ext .html; } if ($w3tc_ext = "") { set $w3tc_rewrite 0; } if ($w3tc_rewrite = 1) { rewrite .* "/wp- content/w3tc/pgcache/$request_uri/_index$w3tc_ua$w3tc_ref$w3tc_ssl$w3tc_ext$w3tc_enc" last; } # END W3TC Page Cache core And here is what I have in my varnish vcl.. sub vcl_recv { # Add a unique header containing the client address remove req.http.X-Forwarded-For; set req.http.X-Forwarded-For = client.ip; # Device detection set req.http.X-Device = "desktop"; if ( req.http.User-Agent ~ "iP(hone|od|ad)" || req.http.User-Agent ~ "Android" ) { set req.http.X-Device = "smart"; } elseif ( req.http.User-Agent ~ "(SymbianOS|BlackBerry|SonyEricsson|Nokia|SAMSUNG|^LG)" ) { set req.http.X-Device = "cell"; } Any help is greatly appreciated, I've been banging my head against this for 2 days..

  Read the article

• MIME "Content-Type" folding and parameter question regarding RFCs?

  - by BastiBense

  Hello, I'm trying to implement a basic MIME parser for the multipart/related in C++/Qt. So far I've been writing some basic parser code for headers, and I'm reading the RFCs to get an idea how to do everything as close to the specification as possible. Unfortunately there is a part in the RFC that confuses me a bit: From RFC882 Section 3.1.1: Each header field can be viewed as a single, logical line of ASCII characters, comprising a field-name and a field-body. For convenience, the field-body portion of this conceptual entity can be split into a multiple-line representation; this is called "folding". The general rule is that wherever there may be linear-white-space (NOT simply LWSP-chars), a CRLF immediately followed by AT LEAST one LWSP-char may instead be inserted. Thus, the single line Alright, so I simply parse a header field and if a CRLF follows with linear whitespace, I simply concat those in a useful manner to result in a single header line. Let's proceed... From RFC2045 Section 5.1: In the Augmented BNF notation of RFC 822, a Content-Type header field value is defined as follows: content := "Content-Type" ":" type "/" subtype *(";" parameter) ; Matching of media type and subtype ; is ALWAYS case-insensitive. [...] parameter := attribute "=" value attribute := token ; Matching of attributes ; is ALWAYS case-insensitive. value := token / quoted-string token := 1*<any (US-ASCII) CHAR except SPACE, CTLs, or tspecials> Okay. So it seems if you want to specify a Content-Type header with parameters, simple do it like this: Content-Type: multipart/related; foo=bar; something=else ... and a folded version of the same header would look like this: Content-Type: multipart/related; foo=bar; something=else Correct? Good. As I kept reading the RFCs, I came across the following in RFC2387 Section 5.1 (Examples): Content-Type: Multipart/Related; boundary=example-1 start="<[email protected]>"; type="Application/X-FixedRecord" start-info="-o ps" --example-1 Content-Type: Application/X-FixedRecord Content-ID: <[email protected]> [data] --example-1 Content-Type: Application/octet-stream Content-Description: The fixed length records Content-Transfer-Encoding: base64 Content-ID: <[email protected]> [data] --example-1-- Hmm, this is odd. Do you see the Content-Type header? It has a number of parameters, but not all have a ";" as parameter delimiter. Maybe I just didn't read the RFCs correctly, but if my parser works strictly like the specification defines, the type and start-info parameters would result in a single string or worse, a parser error. Guys, what's your thought on this? Just a typo in the RFCs? Or did I miss something? Thanks!

  Read the article

• ActiveRecord Logic Challenge - Smart Ways to Use AR Timestamp

  - by keruilin

  My question is somewhat specific to my app's issue, but the answer should be instructive in terms of use cases for association logic and the record timestamp. I have an NBA pick 'em game where I want to award badges for picking x number of games in a row correctly -- 10, 20, 30. Here are the models, attributes, and associations in-play: User id Pick id result # (values can be 'W', 'L', 'T', or nil. nil means hasn't resolved yet.) resolved # (values can be true, false, or nil.) game_time created_at *Note: There are cases where a pick's result field and resolved field will always be nil. Perhaps the game was cancelled. Badge id Award id user_id badge_id created_at User has many awards. User has many picks. Pick belongs to user. Badge has many awards. Award belongs to user. Award belongs to badge. One of the important rules here to capture in the code is that while a user can be awarded multiple streak badges (e.g., a user can win multiple 10-streak badges), the user CAN'T be awarded another badge for consecutive winning picks that were previously granted an award badge. One way to think of this is that all the dates of the winning picks must come after the date that the streak badge was awarded. For example, let's pretend that a user made 13 winning picks from May 5 to May 8, with the 10th winning pick occurring on May 7, and the last 3 on May 8. The user would be awarded a 10-streak badge on May 7. Now if the user makes another winning pick on May 9, the code must recognize that the user only has a streak of 4 winning picks, not 14, because the user already received an award for the first 10. Now let's assume that the user makes 6 more winning picks. In this case, the code must recognize that all winning picks since May 5 are eligible for a 20-streak badge award, and make the award. Another important rule is that when looking at a winning streak, we don't care about the game time, but rather when the pick was made (created_at). For example, let's say that Team A plays Team B on Sat. And Team C plays Team D on Sun. If the user picks Team C to beat Team D on Thurs, and Team A to beat Team C on Fri, and Team A wins on Sat, but Team C loses on Sun, then the user has a losing streak of 1. So when must the streak-check kick-in? As soon as a pick is a win. If it's a loss or tie, no point in checking. One more note: if the pick is not resolved (false) and the result is nil, that means the game was postponed and must be factored out. With all that said, what is the most efficient, effective and lean way to determine whether a user has a 10-, 20- or 30-win streak?

  Read the article

< Previous Page | 367 368 369 370 371 372 373 374 375 376 377 378  | Next Page >