Search Results

Search found 27144 results on 1086 pages for 'tail call optimization'.

Page 371/1086 | < Previous Page | 367 368 369 370 371 372 373 374 375 376 377 378  | Next Page >

  • Connect bluetooth headphones both to PC and phone at the same time

    - by Sergiy Byelozyorov
    I have recently bought Philips SHB6110. Extract from the 13th page of manual: Therefore you can connect your Bluetooth stereo headset. with a Bluetooth stereo enabled phone to both listen to music and lead calls, or with a Bluetooth phone that does not support Bluetooth stereo (A2DP) to lead calls and at the same time to a Bluetooth audio device (Bluetooth enabled MP3 player, Bluetooth audio adapter etc.) to listen to music. Make sure to pair the phone first with your Bluetooth headset, then turn both the phone and headset off to then pair the Bluetooth audio device. With the SwitchStream feature you can listen to music and monitor your calls at the same time. Even while listening to music, you will hear a ring tone when receiving a call and can switch to the call simply by tapping the button. The manual however doesn't specify how do I connect to both device at the same time. I use Toshiba Satellite Pro P300-1CG laptop with Belkin Mini Bluetooth Adapter and Nokia N95 phone. Operating system is Windows 7 64-bit and I have Skype installed. Both phone and compute can be used for listening to music and talking on the phone (on PC via Skype). Best solution would be if I could connect to PC and phone as the same time and monitor calls both mobile and Skype calls while listening music from Winamp. If that is not possible, then I would like at least to be able to listen music from PC, while monitoring calls from mobile. So, please tell me how do I connect both PC and phone to headphones?

    Read the article

  • SSH over HTTPS with proxytunnel and nginx

    - by Thermionix
    I'm trying to setup an ssh over https connection using nginx. I haven't found any working examples, so any help would be appreciated! ~$ cat .ssh/config Host example.net Hostname example.net ProtocolKeepAlives 30 DynamicForward 8118 ProxyCommand /usr/bin/proxytunnel -p ssh.example.net:443 -d localhost:22 -E -v -H "User-Agent: Mozilla/4.0 (compatible; MSIE 6.0; Win32)" ~$ ssh [email protected] Local proxy ssh.example.net resolves to 115.xxx.xxx.xxx Connected to ssh.example.net:443 (local proxy) Tunneling to localhost:22 (destination) Communication with local proxy: -> CONNECT localhost:22 HTTP/1.0 -> Proxy-Connection: Keep-Alive -> User-Agent: Mozilla/4.0 (compatible; MSIE 6.0; Win32) <- <html> <- <head><title>400 Bad Request</title></head> <- <body bgcolor="white"> <- <center><h1>400 Bad Request</h1></center> <- <hr><center>nginx/1.0.5</center> <- </body> <- </html> analyze_HTTP: readline failed: Connection closed by remote host ssh_exchange_identification: Connection closed by remote host Nginx config on the server; ~$ cat /etc/nginx/sites-enabled/ssh upstream tunnel { server localhost:22; } server { listen 443; server_name ssh.example.net; location / { proxy_pass http://tunnel; proxy_set_header Host $host; proxy_set_header X-Real-IP $remote_addr; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; proxy_redirect off; } ssl on; ssl_certificate /etc/ssl/certs/server.cer; ssl_certificate_key /etc/ssl/private/server.key; } ~$ tail /var/log/nginx/access.log 203.xxx.xxx.xxx - - [08/Feb/2012:15:17:39 +1100] "CONNECT localhost:22 HTTP/1.0" 400 173 "-" "-"

    Read the article

  • jboss 5.1 mysql connection pooling

    - by boyd4715
    I am using JBOSS 5.1.0.GA, MySQL 5.5 and Hibernate 3.3.1 GA (included with JBOSS) + Spring. My question is do I need to add c3p0 as a data source in my spring/hibernate configuration for connection pooling or are the setting in the JBOSS mysql-ds.xml setting enough. My mysql-ds.xml is the following: <datasources> <local-tx-datasource> <jndi-name>MySqlDS</jndi-name> <connection-url>jdbc:mysql://localhost:3306/ecotrak</connection-url> <driver-class>com.mysql.jdbc.Driver</driver-class> <user-name>ecotrak</user-name> <password>ecotrak</password> <min-pool-size>5</min-pool-size> <max-pool-size>20</max-pool-size> <idle-timeout-minutes>5</idle-timeout-minutes> <exception-sorter-class-name>org.jboss.resource.adapter.jdbc.vendor.MySQLExceptionSorter</exception-sorter-class-name> <!-- should only be used on drivers after 3.22.1 with "ping" support --> <valid-connection-checker-class-name>org.jboss.resource.adapter.jdbc.vendor.MySQLValidConnectionChecker</valid-connection-checker-class-name> <!-- sql to call when connection is created <new-connection-sql>some arbitrary sql</new-connection-sql> --> <!-- sql to call on an existing pooled connection when it is obtained from pool - MySQLValidConnectionChecker is preferred for newer drivers <check-valid-connection-sql>some arbitrary sql</check-valid-connection-sql> --> <!-- corresponding type-mapping in the standardjbosscmp-jdbc.xml (optional) --> <metadata> <type-mapping>mySQL</type-mapping> </metadata> </local-tx-datasource> </datasources>

    Read the article

  • Ubuntu server PPTPD with OS X clients Problems

    - by Nakedsteve
    I'm trying to get a PPTP server running on a ubuntu server, but I've run into some issues with it. I followed this guide on how to set up pptpd on my server, and everything went smooth, but when I try to connect with my mac, it gives me this error: Here's my configuration: Does anyone have any idea as to what I'm doing wrong here? Update: Here's what the pptpd.log has to say about it: steve@debian:~$ sudo tail /var/log/pptpd.log sudo: unable to resolve host debian Sep 3 21:46:43 debian pptpd[2485]: MGR: Manager process started Sep 3 21:46:43 debian pptpd[2485]: MGR: Maximum of 11 connections available Sep 3 21:46:43 debian pptpd[2485]: MGR: Couldn't create host socket Sep 3 21:46:43 debian pptpd[2485]: createHostSocket: Address already in use Sep 3 21:46:56 debian pptpd[2486]: CTRL: Client 192.168.1.101 control connection started Sep 3 21:46:56 debian pptpd[2486]: CTRL: Starting call (launching pppd, opening GRE) Sep 3 21:46:56 debian pptpd[2486]: GRE: read(fd=6,buffer=204d0,len=8196) from PTY failed: status = -1 error = Input/output error, usually caused by unexpected termination of pppd, check option syntax and pppd logs Sep 3 21:46:56 debian pptpd[2486]: CTRL: PTY read or GRE write failed (pty,gre)=(6,7) Sep 3 21:46:56 debian pptpd[2486]: CTRL: Reaping child PPP[2487] Sep 3 21:46:56 debian pptpd[2486]: CTRL: Client 192.168.1.101 control connection finished My pptpd options are: asyncmap 0 noauth crtscts lock hide-password modem debug proxyarp lcp-echo-interval 30 lcp-echo-failure 4 nopix

    Read the article

  • Bash wonkyness on Ubuntu versus RHEL

    - by d34dh0r53
    Fellow faulters, I'm playing around with a one liner that I've developed on a RHEL 5.4 box and I have it working perfectly: TOTAL_RAM=`free | grep Mem: | awk '{ print $2 }'`; \ ps axo rss,comm,pid | awk -v total_ram=$TOTAL_RAM \ '{ proc_list[$2] += $1; } END { for (proc in proc_list) \ { proc_pct = (proc_list[proc]/total_ram)*100; printf("%d\t%s\t%0.2f%\n", proc_list[proc],proc,proc_pct); }}' \ | sort -n | tail -n 10 Which outputs something like the following on my RHEL box: 3736 logmon 0.01% 4156 EvMgrC 0.01% 4692 hald 0.01% 5020 ntpd 0.02% 6252 sshd 0.02% 7784 cvd 0.02% 9224 snmpd 0.03% 13068 dsm_sa_datamgr3 0.04% 23320 dsm_om_connsvc3 0.07% 4249864 mysqld 12.90% However on my Ubuntu 9.04 slice I get this: awk: run time error: not enough arguments passed to printf("%d %s %0.2f% ") FILENAME="-" FNR=104 NR=104 33248 console-kit-dae 3.17 I think it has to be bash that is borking something, but I'm really not doing anything that should be that bash specific. The RHEL box is running: # yum info bash | grep -e Version -e Release Version : 3.2 Release : 24.el5 And the Ubuntu box: # apt-cache show bash | grep -e Version Version: 3.2-5ubuntu1 I haven't dug into this super deeply, and thought I'd ping my fellow johnnys to see if you've ever run across this before. /bow

    Read the article

  • Better filesystem for ZODB and Plone.app.blob

    - by h2o
    I am interested to know which Linux file system is best for hosting Zope's Object Database (Data.fs) and Plone.app.blob (blobstorage). Various reviews from the Internet suggests that XFS is good for hosting both. XFS is fast and works well with large files. Anyone using XFS for Zope or Plone? What optimization flags, if any, do you use for XFS? Note that this is a repost. I originally asked this on StackOverflow and was given a suggestion to post on Severfault instead.

    Read the article

  • Error installing pygraphviz on OSX

    - by Neil
    I'm trying to get the graph-models to work (from django-command extensions) on Snow Leopard. It requires pygraphviz, which I installed via macports. After successful install I am getting this error: >>> import pygrahphviz Traceback (most recent call last): File "<stdin>", line 1, in <module> ImportError: No module named pygrahphviz >>> import pygraphviz Traceback (most recent call last): File "<stdin>", line 1, in <module> File "/Library/Python/2.6/site-packages/pygraphviz-1.1-py2.6-macosx-10.6-universal.egg/pygraphviz/__init__.py", line 54, in <module> from agraph import AGraph, Node, Edge, Attribute, ItemAttribute File "/Library/Python/2.6/site-packages/pygraphviz-1.1-py2.6-macosx-10.6-universal.egg/pygraphviz/agraph.py", line 19, in <module> import graphviz as gv File "/Library/Python/2.6/site-packages/pygraphviz-1.1-py2.6-macosx-10.6-universal.egg/pygraphviz/graphviz.py", line 7, in <module> import _graphviz ImportError: dlopen(/Library/Python/2.6/site-packages/pygraphviz-1.1-py2.6-macosx-10.6-universal.egg/pygraphviz/_graphviz.so, 2): Symbol not found: _Agdirected Referenced from: /Library/Python/2.6/site-packages/pygraphviz-1.1-py2.6-macosx-10.6-universal.egg/pygraphviz/_graphviz.so Expected in: flat namespace in /Library/Python/2.6/site-packages/pygraphviz-1.1-py2.6-macosx-10.6-universal.egg/pygraphviz/_graphviz.so >>> Any suggestions?

    Read the article

  • Repairing inconsistent pages in database

    - by Raj
    We have a SQL 2000 DB. The server crashed due to Raid array failure. Now when we run DBCC CHECKDB, we get an error that there are 27 consistency errors in 9 pages. When we run DBCC PAGE on these pages, we get this: Msg 8939, Level 16, State 106, Line 1 Table error: Object ID 1397580017, index ID 2, page (1:8404521). Test (m_freeCnt == freeCnt) failed. Values are 2 and 19. Msg 8939, Level 16, State 108, Line 1 Table error: Object ID 1397580017, index ID 2, page (1:8404521). Test (emptySlotCnt == 0) failed. Values are 1 and 0. Since the indicated index is non-clustered and is created by a unique constarint that includes 2 columns, we tried dropping and recreating the index. This resulted in the following error: CREATE UNIQUE INDEX terminated because a duplicate key was found for index ID 2. Most significant primary key is '3280'. The statement has been terminated. However running Select var_id,result_on from tests group by var_id,result_on having count(*)>1 returns 0 rows. Here is what we are planning to do: Restore a pre-server crash copy of the DB and run DBCC CHECKDB If that returns clean, then restore again with no recovery Apply all subequent TLOG backups Stop production app, take a tail log backup and apply that too Drop prod DB and rename the freshly restored DB to make it prod Start prod app Could someone please punch holes in this approach? Maybe, suggest a different approach? What we need is minimum downtime. SQL 2000 DB Size 94 GB The table that has corrupt pages has 460 Million+ rows of data Thanks for the help. Raj

    Read the article

  • Samba between Ubuntu server 10.10 and Windows Vista, Windows 7

    - by chepukha
    Hi all, I have a linux box running Linux server ubuntu 10.10. I have installed Samba on this linux box and want to share files with my laptops which run Windows Vista home and Windows 7 home. I have been struggling with the setup for almost a month but couldn't get it right. If I try to access share folder from Windows Vista, I get message "Windows cannot access \\server_ip_address". Error code: 0x80070035. The network path was not found. If I access from Windows 7, then after entering password to login I can see the list of share folders on Linux box. But if I click on a share folder, I get the same error message as above. Tail /var/log/samba/log.windows7-pc I got the following message: [2011/03/16 00:17:41.427238, 0] smbd/service.c:988(make_connection_snum) canonicalize_connect_path failed for service sharemedia, path /root/sharemedia Here is my setting in smb.conf [global] share modes = yes netbios name = Samba workgroup = WORKGROUP wins support = yes encrypt passwords = true [sharemedia] comment = Tesing sharing using Samba path=/root/sharemedia/ public = yes valid users = samba_usr_name ; make sure all files are sensible permissions create mask = 0660 force create mask = 0660 directory mask = 2770 force directory mask = 2770 directory security mask = 0000 ; Normal share parameters read only = no browseable = yes writable = yes guest ok = no

    Read the article

  • Authenticating Active Directory Users to Mac OS X Mavericks Server L2TP VPN Service

    - by dean
    We have a Windows Server 2012 Active Directory Infrastructure that consists of two domain controllers. Bound to the Active Directory Domain is a Mac OS X Mavericks Server 10.9.3. The server runs Profile Manager and VPN Services. My Active Directory users are able to authenticate to the Profile Manager, but not the VPN. I have found several threads on other forums of other users reporting similar issues, here is just one of many references: https://discussions.apple.com/thread/5174619 It appears as though the issue is related to a CHAP authentication failure. Can anyone suggest what next troubleshooting steps I might take? Is there a way to liberalize the authentication mechanism to include MSCHAP? Here is an excerpt of the transaction from the logs. Please note the domain has been changed to example.com. Jun 6 15:25:03 profile-manager.example.com vpnd[10317]: Incoming call... Address given to client = 192.168.55.217 Jun 6 15:25:03 profile-manager.example.com pppd[10677]: publish_entry SCDSet() failed: Success! Jun 6 15:25:03 --- last message repeated 2 times --- Jun 6 15:25:03 profile-manager.example.com pppd[10677]: pppd 2.4.2 (Apple version 727.90.1) started by root, uid 0 Jun 6 15:25:03 profile-manager.example.com pppd[10677]: L2TP incoming call in progress from '108.46.112.181'... Jun 6 15:25:03 profile-manager.example.com racoon[257]: pfkey DELETE received: ESP 192.168.55.12[4500]->108.46.112.181[4500] spi=25137226(0x17f904a) Jun 6 15:25:04 profile-manager.example.com pppd[10677]: L2TP connection established. Jun 6 15:25:04 profile-manager kernel[0]: ppp0: is now delegating en0 (type 0x6, family 2, sub-family 0) Jun 6 15:25:04 profile-manager.example.com pppd[10677]: Connect: ppp0 <--> socket[34:18] Jun 6 15:25:04 profile-manager.example.com pppd[10677]: CHAP peer authentication failed for alex Jun 6 15:25:04 profile-manager.example.com pppd[10677]: Connection terminated. Jun 6 15:25:04 profile-manager.example.com pppd[10677]: L2TP disconnecting... Jun 6 15:25:04 profile-manager.example.com pppd[10677]: L2TP disconnected Jun 6 15:25:04 profile-manager.example.com vpnd[10317]: --> Client with address = 192.168.55.217 has hung up

    Read the article

  • Request Tracker 4: Ticket Escalation

    - by Randy
    I am running Request Tracker 4 on a Debian Squeeze Server. I have to implement a priority escalation. Actually escalation is not the right term for this since the the ticket priority should be set linear via rt-crontool (or any other tool that can be run via a cronjob) dependent on the time that has been passed between the „Started“ and „Due“ to a number between 0 (starting priority) and the „Final Priority“ (eg. 100) while the value of the „Final Priority“ should be reached exactly the moment the „Due“-Date is passed. This already implies that the search condition should be all tickets of a certain queue that have „Started“ AND „Due“ AND „Final Priority“. The cronjob should be called very frequently for excample any 5 or 10 minutes so that the call should be indempotent and not depentent on the frequency of the rt-crontool invocations. One Example: A Ticket is Started at 2012-12-23 0am and Due is 2012-12-23 11.59pm while the Final Priority is 100. When the call is made at noon the priority should be set to 50. Could anybody help me with this? Thank you for reading this to the bottom!

    Read the article

  • Web SMTP Server(foo.com) will not send mail to exchange server which is also(foo.com)

    - by Atom
    I think I understand this problem fully, but I do not know how to approach it or where to go in terms of troubleshooting. I've got my one domain http://foo.com that runs a Zen Cart installation that needs to be able to send emails to users(order confirmation, password reset). This works fine to send to any other domain BUT foo.com. I'm running a locally hosted exchange server that is foo.com, and we can send and receive email just fine. If I run tail -f /usr/local/psa/var/log/maillog I recieve this error: Apr 1 10:08:51 foo qmail-local-handlers[25824]: Handlers Filter before-local for qmail started ... Apr 1 10:08:51 foo qmail-local-handlers[25824]: from= Apr 1 10:08:51 foo qmail-local-handlers[25824]: [email protected] Apr 1 10:08:51 foo qmail-local-handlers[25824]: cannot reinject message to '[email protected]' Apr 1 10:08:51 foo qmail: 1270141731.583139 delivery 32410: failure: This_address_no_longer_accepts_mail./ Apr 1 10:08:51 foo qmail: 1270141731.584098 status: local 0/10 remote 0/20 I understand that the foo.com SMTP service doesn't have any account but the one that is used to authenticate mail being sent, so of course, I understand why it's saying 'this address no longer accepts mail'. My question is, how can I get the foo.com(web) SMTP service to handle emails meant for my exchange server([email protected]) or how do I handle the mail that needs to be sent to our exchange server? Is this something to do with MX records? Thanks in advance A

    Read the article

  • Is it possible to mount a disk image, created with dd, to a directory on a mounted external usb hdd?

    - by Keeper Hood
    I have an image of my home (/dev/sda3) partition, which I've created using the "dd" command. dd if=/dev/sda3 of=/path/to/disk.img I've deleted the home partition via gparted in order to enlarge my /dev/root partition. Then I've recreated the /dev/sda3 partition which is smaller in size then the one I've backed up to the image. I was wondering since I have a 2TB external HDD, could it be possible to mount my backed up image on the external HDD and then copy the files into the /home directory. Since the external HDD would be already in a "mounted state", I'm unsure whether this is a good idea, mounting on a mounted device. I'm running Slackware 13.37 (64bit). used ext4 on all the partitions. resized the root partition with gparted live cd. I've tried mount -t ext4 /path/to/disk.img /mng/image -o loop It gave me an fs error (wrong fs type, bad option, bad superblock on dev/loop/0) Then i did dmesg | tail which outputs: EXT4-fs (loop0) : bad geometry: block count 29009610 exceeds size of defice (1679229 blocks) I have no idea what to do, I want to restore my /home data from the image I've backed up.

    Read the article

  • Unable to connect to shared (iscsitarget) dvd-rw drive on ubuntu karmic box

    - by develop7
    Preface: I have desktop with DVD-RW drive that runs primarily on Linux (namely Ubuntu 9.10). My wife has netbook that rins Windows XP with no cd/dvd drive. There's also LAN through our ADSL modem/router. I've "ported" (actually, I've just grabbed sources and ran dpkg-buildpackage) iscsitarget package from Ubuntu Lucid to Karmic (here are packages), installed it (sudo aptitude install iscsitarget; sudo m-a a-i iscsitarget) and configured it in the following way (/etc/ietd.conf): Target iqn.2020-01.local.develop7-desktop:storage.disc.dvdrw Lun 0 Path=/dev/sr0,Type=blockio #I've skipped commented lines Also, I've opened port 3260 with ufw: $ sudo ufw status | grep 3260 3260 ALLOW 192.168.1.0/24 But (here's the trouble) I still can't connect to this target from Windows box. Microsoft Software iSCSI Initiator tells "Logon failure" upon connect attempt. After unsuccessful connection attempt I've noticed this line in dmesg | tail's output: iscsi_trgt: ioctl(299) invalid ioctl cmd c078690d So the question is — what's wrong with my config/iSCSI target/whatever else? Or, in short — what I'm doing wrong? Thanks in advance.

    Read the article

  • Unable to connect to shared (iscsitarget) dvd-rw drive on ubuntu karmic box

    - by Develop7
    Intro I have desktop with DVD-RW drive that runs primarily on Linux (namely Ubuntu 9.10). My wife has netbook that rins Windows XP with no cd/dvd drive. There's also LAN through our ADSL modem/router. I've "ported" (actually, I've just grabbed sources and ran dpkg-buildpackage) iscsitarget package from Ubuntu Lucid to Karmic (here are packages), installed it (sudo aptitude install iscsitarget; sudo m-a a-i iscsitarget) and configured it in the following way (/etc/ietd.conf): Target iqn.2020-01.local.develop7-desktop:storage.disc.dvdrw Lun 0 Path=/dev/sr0,Type=blockio #I've skipped commented lines Also, I've opened port 3260 with ufw: $ sudo ufw status | grep 3260 3260 ALLOW 192.168.1.0/24 Problem But (here's the trouble) I still can't connect to this target from Windows box. Microsoft Software iSCSI Initiator screams "Logon failure" upon connect attempt, and, respectively, fails to connect. After unsuccessful connection attempt I've noticed this line in dmesg | tail's output: iscsi_trgt: ioctl(299) invalid ioctl cmd c078690d Question So the question is — what's wrong with my config/iSCSI target/whatever else? Or, in short — what I'm doing wrong? Thanks in advance.

    Read the article

  • Apache Logs - Not Showing Requested URL or User IP

    - by iarfhlaith
    Hey all, I'm having a problem with a server that keeps falling over. Looking through the Apache error logs it appears to come from a rogue PHP script. I'm trying to track this down using Apache's error_log and access_log but the server log format isn't giving me the detail I need. I suspect the log format isn't sufficient, but I've reviewed the Apache documentation and I've included the switches that I think I need to see. Here's my LogFormat configuration in the httpd.conf file: `LogFormat "%h %l %u %t \"%r\" %s %b %U %q %T \"%{Referer}i\" \"%{User-Agent}i\"" extended CustomLog logs/access_log extended` Using the %U %q %T switches I expected to see the requested URL, query string, and the time it took to serve the request, but I'm not seeing any of this information when I tail the log. Here's an example: 127.0.0.1 - - [01/Jun/2010:14:12:04 +0100] "OPTIONS * HTTP/1.0" 200 - * 0 "-" "Apache/2.2.15 (Unix) mod_ssl/2.2.15 OpenSSL/0.9.8e-fips-rhel5 mod_bwlimited/1.4 (internal dummy connection)" 127.0.0.1 - - [01/Jun/2010:14:12:05 +0100] "OPTIONS * HTTP/1.0" 200 - * 0 "-" "Apache/2.2.15 (Unix) mod_ssl/2.2.15 OpenSSL/0.9.8e-fips-rhel5 mod_bwlimited/1.4 (internal dummy connection)" 127.0.0.1 - - [01/Jun/2010:14:12:06 +0100] "OPTIONS * HTTP/1.0" 200 - * 0 "-" "Apache/2.2.15 (Unix) mod_ssl/2.2.15 OpenSSL/0.9.8e-fips-rhel5 mod_bwlimited/1.4 (internal dummy connection)" 127.0.0.1 - - [01/Jun/2010:14:12:07 +0100] "OPTIONS * HTTP/1.0" 200 - * 0 "-" "Apache/2.2.15 (Unix) mod_ssl/2.2.15 OpenSSL/0.9.8e-fips-rhel5 mod_bwlimited/1.4 (internal dummy connection)" 127.0.0.1 - - [01/Jun/2010:14:12:08 +0100] "OPTIONS * HTTP/1.0" 200 - * 0 "-" "Apache/2.2.15 (Unix) mod_ssl/2.2.15 OpenSSL/0.9.8e-fips-rhel5 mod_bwlimited/1.4 (internal dummy connection)" 127.0.0.1 - - [01/Jun/2010:14:12:09 +0100] "OPTIONS * HTTP/1.0" 200 - * 0 "-" "Apache/2.2.15 (Unix) mod_ssl/2.2.15 OpenSSL/0.9.8e-fips-rhel5 mod_bwlimited/1.4 (internal dummy connection)" Have a made a mistake in configuring the LogFormat or is it something else? Also, each request appears to come from the localhost. How come it's not giving me the remote user's IP address? Thanks, Iarfhlaith

    Read the article

  • OpenVPN server throws an "access denied" error

    - by HackToHell
    OpenVPN refuses to start up and exists with this error ever since i upgraded Ubuntu from 1.04 to 11.10 Dec 14 19:12:38 oogle ovpn-server[32150]: OpenVPN 2.2.0 i686-linux-gnu [SSL] [LZO2] [EPOLL] [PKCS11] [eurephia] [MH] [PF_INET6] [IPv6 payload 20110424-2 (2.2RC2)] built on Jul 4 2011 Dec 14 19:12:38 oogle ovpn-server[32150]: NOTE: the current --script-security setting may allow this configuration to call user-defined scripts Dec 14 19:12:38 oogle ovpn-server[32150]: Note: cannot open openvpn-status.log for WRITE Dec 14 19:12:38 oogle ovpn-server[32150]: Note: cannot open ipp.txt for READ/WRITE Dec 14 19:12:38 oogle ovpn-server[32150]: Diffie-Hellman initialized with 1024 bit key Dec 14 19:12:38 oogle ovpn-server[32150]: Cannot load private key file server.key: error:0200100D:system library:fopen:Permission denied: error:20074002:BIO routines:FILE_CTRL:system lib: error:140B0002:SSL routines:SSL_CTX_use_PrivateKey_file:system lib Dec 14 19:12:38 oogle ovpn-server[32150]: Error: private key password verification failed Dec 14 19:12:38 oogle ovpn-server[32150]: Exiting Dec 14 19:12:46 oogle ovpn-server[32201]: OpenVPN 2.2.0 i686-linux-gnu [SSL] [LZO2] [EPOLL] [PKCS11] [eurephia] [MH] [PF_INET6] [IPv6 payload 20110424-2 (2.2RC2)] built on Jul 4 2011 Dec 14 19:12:46 oogle ovpn-server[32201]: NOTE: the current --script-security setting may allow this configuration to call user-defined scripts Dec 14 19:12:46 oogle ovpn-server[32201]: Note: cannot open openvpn-status.log for WRITE Dec 14 19:12:46 oogle ovpn-server[32201]: Note: cannot open ipp.txt for READ/WRITE Dec 14 19:12:46 oogle ovpn-server[32201]: Diffie-Hellman initialized with 1024 bit key Dec 14 19:12:46 oogle ovpn-server[32201]: Cannot load private key file server.key: error:0200100D:system library:fopen:Permission denied: error:20074002:BIO routines:FILE_CTRL:system lib: error:140B0002:SSL routines:SSL_CTX_use_PrivateKey_file:system lib Dec 14 19:12:46 oogle ovpn-server[32201]: Error: private key password verification failed Dec 14 19:12:46 oogle ovpn-server[32201]: Exiting

    Read the article

  • How can I deskew and crop PDFs made from scanned pages *automatically*? [closed]

    - by Pietro M.
    I have several PDFs made up of book pages' scans. The scans are made from two pages at a time and some of these scans are skewed, making text appear slightly tilted. I'm looking for a tool that could allow me to do an automatic optimization by deskewing the scans without losing readability. I've found the GPL software briss to crop the scans in order to have a 1:1 page ratio instead of 2:1, but I don't have any tool to deskew the pages. I stumbled upon unpaper, another open source tool that seems perfect for what I want to do, but that tool is Linux only and it doesn't work on PDF files directly. Any hint is appreciated.

    Read the article

  • RemoteApp .rdp embed creds?

    - by Chris_K
    Windows 2008 R2 server running Remote Desktop Services (what we used to call Terminal Services back in the olden days). This server is the entry point into a hosted application -- you could call it Software as a Service I suppose. We have 3rd party clients connecting to use it. Using RemoteApp Manager to build RemoteApp .rdp shortcuts to distribute to client workstations. These workstations are not in the same domain as the RDS server. There is no trust relationship between domains (nor will there be). There is a tightly controlled site to site VPN between workstations and the RDS server, we're quite confident we have access to the server locked down. The remoteApp being run is an ERP application with its own authentication scheme. The issue? I'm trying to avoid the need to create AD logins for every end user when connecting to the RemoteApp server. In fact, since we're doing a remoteApp and they have to authenticate to that app, I'd rather just not prompt them at all for AD creds. I certainly don't want them caught up in managing AD passwords (and periodic expirations) for accounts they only use to get to their ERP login. However, I can't figure out how to embed AD creds in a RemoteApp .rdp file. I don't really want to turn off all authentication on the RDS server at that level. Any good options? My goal is to make this as seamless as possible for the end-users. Clarifying questions are welcome.

    Read the article

  • VoIP setup for one external PSTN line

    - by Jcl
    I'm completely new to VoIP and the likes, and I'm trying to find information about what could be the best setup for this. I need 4 (maybe more in the future, but maximum 5 or 6) wireless extensions, connected to 1 PSTN line, and maybe 2 in the future. I've been trying to gather information about the gear needed but everything I find seems too much over-the-top (and extremely expensive). The main problem is that the physical place we are on doesn't have possibilities of having a decent internet connection, so using a external VoIP "virtual PBX" is not an option. Thing is, even if small, phone is critical to this organization. I currently have an analog DECT/GAP PBX which does what I need, however the PBX is very bad and the call quality is horrible, and that's why I want to change it. The requirements would be: 4 wireless terminals (routing cable is not an option), all of them ringing on incoming PSTN calls. Ability to do internal calls (4 separate offices) and ability to pass calls between terminals. The 4 terminals should be able to access the external PSTN line without dialing any special codes. Very important: terminals should be able to issue commands on the PSTN line to the external operator in the form *nn*nnnnnnnn# . Don't know wether this could face to be a problem, but I've had problems with analog PBX which would take any * as a PBX command and wouldn't allow terminals to send it to the external lines. Not so important, but would be nice to have: call waiting music Could anyone recommend such a setup? I need to be able to do this on a EXTREMELY LIMITED budget (that is: I don't have a limit, but all should get as much to zero as possible). I have enough spare powerful computers and a 300mbps wireless network which works just fine, so that's not to include in the budget. Don't really know if this is the best place to ask, but it's the most StackExchange-related site I've found to this subject.

    Read the article

  • copying folder and file permissions from one user to another after switching domains [closed]

    - by emptyspaces
    Please excuse the title, this was the best way I could think to describe this scenario without an entire paragraph. I am using C#. Currently I have a file server running windows server 2003 setup on a domain, we will call this oldDomain, and I have about 500 user accounts with various permissions on this server. Because of restrictions out of my control we are abandoning this domain and using another one that is more dominant within the organization, we will call this newDomain. All of the users that have accounts on oldDomain also have accounts on newDomain, but the usernames are completely different and there is no link between the two. What I am hoping to do is generate a list of all user accounts and this appropriate sid's from AD on the oldDomain, I already have this part done using dsquery and dsget. Then I will have someone go through and match all of the accounts from oldDomain to the correct username on newDomain. Ultimately leaving me with a list of sids from oldDomain and the appropriate username from newDomain. Now I am hoping to copy the file and folder permissions from the old user from oldDomain to the new user on newDomain once I join the server to newDomain. Can anyone tell me what the best way to copy permissions from the sid to the user on newDomain? There are a bunch of articles out there about copying permissions from user a to user b but I wanted to check and see what the recommended practice is here since there are a ton of directories.

    Read the article

  • Is there any limit to AIX 5.3 pipe size ?

    - by snowflake
    Hello, I'm in trouble while performing cat/tail/head operation on large files on Aix 5.3. When asking for a cat of several 1Go file redirected to another one: cat file1 file2 file3 > outputfile The outputfile is limited to 2Go (cat: output error and result file is 2147483647 bytes) Filesystem is jfs2. I successfully uploaded through ftp 10Go files on the filesystem without problem. I found nothing relevant in etc/security/limits: default: fsize = -1 core = 2097151 cpu = -1 data = 262144 rss = 65536 stack = 65536 nofiles = 20000 ulimit -a core file size (blocks) unlimited data seg size (kbytes) 245759 file size (blocks) unlimited max memory size (kbytes) unlimited open files 2000 pipe size (512 bytes) 64 stack size (kbytes) 32768 cpu time (seconds) unlimited max user processes 2048 virtual memory (kbytes) 278527 The problem does not occur on another AIX 5.3 server, I'm just looking for a different configuration that might be the source of the problem. /etc/security/limits on the server without the problem: default: fsize = -1 core = 2097151 cpu = -1 data = 262144 rss = 65536 stack = 65536 nofiles = 20000 ulimit -a on the server without the problem: core file size (blocks, -c) 1048575 data seg size (kbytes, -d) 131072 file size (blocks, -f) unlimited max memory size (kbytes, -m) 32768 open files (-n) 20000 pipe size (512 bytes, -p) 64 stack size (kbytes, -s) 32768 cpu time (seconds, -t) unlimited max user processes (-u) 262144 virtual memory (kbytes, -v) unlimited

    Read the article

  • Why is this file hidden when you run ls?

    - by luckytaxi
    For a few weeks now I couldn't figure out why I wasn't able to delete this one particular file. As root I can, but my shell script runs as a different user. So I go run ls -la and it's not there. However, if I call it as a parameter, it shows up! Sure enough, the owner is root, hence I'm not able to delete. Notice, 6535 is missing ... [root@server]# ls -la 653* -rw-rw-r-- 1 svn svn 24002 Mar 26 01:00 653 -rw-rw-r-- 1 svn svn 7114 Mar 26 01:01 6530 -rw-rw-r-- 1 svn svn 8653 Mar 26 01:01 6531 -rw-rw-r-- 1 svn svn 6836 Mar 26 01:01 6532 -rw-rw-r-- 1 svn svn 3308 Mar 26 01:01 6533 -rw-rw-r-- 1 svn svn 3918 Mar 26 01:01 6534 -rw-rw-r-- 1 svn svn 3237 Mar 26 01:01 6536 -rw-rw-r-- 1 svn svn 3195 Mar 26 01:01 6537 -rw-rw-r-- 1 svn svn 27725 Mar 26 01:01 6538 -rw-rw-r-- 1 svn svn 263473 Mar 26 01:01 6539 Now it shows up if you call it directly. [root@server]# ls -la 6535 -rw-rw-r-- 1 root root 3486 Mar 26 01:01 6535

    Read the article

  • Have an Input/output error when connecting to a server via ssh

    - by Shehzad009
    Hello I seem to be having a problem while connecting to a Ubuntu Server while connecting via ssh. When I login, I get this error. Could not chdir to home directory /home/username: Input/output error It seems like my home folder is corrupt or something. I cannot ls in the home folder directory, and in my usename directory, I can't cd into this. As root I cannot ls in the home directory as well or in any directory in Home. I notice as well when I save in vim or quit, it get this error at the bottom of the page E138: Cannot write viminfo file /home/root/.viminfo! Any ideas? EDIT: this is what happens if I type in these commands mount proc on /proc type proc (rw,noexec,nosuid,nodev) none on /sys type sysfs (rw,noexec,nosuid,nodev) fusectl on /sys/fs/fuse/connections type fusectl (rw) none on /sys/kernel/debug type debugfs (rw) none on /sys/kernel/security type securityfs (rw) none on /dev type devtmpfs (rw,mode=0755) none on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620) none on /dev/shm type tmpfs (rw,nosuid,nodev) none on /var/run type tmpfs (rw,nosuid,mode=0755) none on /var/lock type tmpfs (rw,noexec,nosuid,nodev) /dev/mapper/RAID1-lvvar on /var type xfs (rw) /dev/mapper/RAID5-lvsrv on /srv type xfs (rw) /dev/mapper/RAID5-lvhome on /home type xfs (rw) /dev/mapper/RAID1-lvtmp on /tmp type reiserfs (rw) dmesg | tail [1213273.364040] Filesystem "dm-3": xfs_log_force: error 5 returned. [1213274.084081] Filesystem "dm-4": xfs_log_force: error 5 returned. [1213309.364038] Filesystem "dm-3": xfs_log_force: error 5 returned. [1213310.084041] Filesystem "dm-4": xfs_log_force: error 5 returned. [1213345.364039] Filesystem "dm-3": xfs_log_force: error 5 returned. [1213346.084042] Filesystem "dm-4": xfs_log_force: error 5 returned. [1213381.365036] Filesystem "dm-3": xfs_log_force: error 5 returned. [1213382.084047] Filesystem "dm-4": xfs_log_force: error 5 returned. [1213417.364039] Filesystem "dm-3": xfs_log_force: error 5 returned. [1213418.084063] Filesystem "dm-4": xfs_log_force: error 5 returned. fdisk -l /dev/sda Cannot open /dev/sda

    Read the article

  • Extract archive here, autodetect subfolder

    - by lorancou
    I use 7-Zip under Windows 7 to extract all kind of archives. The ever-running problem is that there is not a single way to handle subfolders. Some people create their archives like this (let's call it type A): . +-- subfolder ¦   +-- file 1 ¦   +-- file 2 ¦   +-- ... "Extract Here" will extract everything to subfolder/, which is fine; "Extract to <Folder>" will create an extra subfolder level, which is annoying. And other people create them like that (let's call it type B): . +-- file1 +-- file 2 +-- ... "Extract Here" will populate the current folder, which can bring a lot of mess if this folder already contains tons of other files, and which is very annoying; "Extract to <Folder>" will create a subfolder and conveniently stuff it with the archive content, which is fine. So this leaves two options: always choose to "Extract to <Folder>" and live with the extra subfolder for type A archives. Or open the archive before extracting it to check if this is a type A or B, and then appropriately select "Extract Here" or "Extract to <Folder>". I usually do the latter, but I just discovered that KDE is offering a very handy Extract Archive Here, Autodetect Subfolder feature that automates that. It'll "Extract Here" if there's only one subfolder in the archive, otherwise it'll "Extract to <Folder>". I love this idea. Is there a Windows 7 tool offering this option? Preferably integrated in the explorer context menu? Maybe it's hidden somewhere in 7-Zip and I just didn't find it?

    Read the article

< Previous Page | 367 368 369 370 371 372 373 374 375 376 377 378  | Next Page >