Search Results

Search found 52213 results on 2089 pages for 'ipad application'.

Page 372/2089 | < Previous Page | 368 369 370 371 372 373 374 375 376 377 378 379  | Next Page >

  • Such thing as a free lunch

    - by red@work
    There is a lot of hard work goes on in Red Gate, no doubt. And then there are things we're asked to get involved with, that aren't hard and don't feel much like work. What? Give up our free lunch at Red Gate for. a free lunch in a pub? Within an hour, myself and a colleague are at the Railway Vue pub in nearby Impington. This is all part of Red Gate's aim to hire more Software Engineers and Test Engineers, to help Red Gate grow into one of the greatest software companies in the world (it's already the best small software development company in the UK). Phase one then - buy lunch for Cambridge. Seriously, not just the targeted engineers, but for anyone who could print the voucher and make it to the nearest of the venues, two of which happen to be pubs. We're here to watch people happily eat a free pub lunch at Red Gate's expense. We also get involved and I swear I didn't order a beer with the food but the landlord says I clearly did and I'm not one to argue. Red Gate are offering a free iPad to anyone that comes to interview for a Software Engineer or Test Engineer role. We speak to a few engineers who are genuinely interested. We speak to a couple of DBA's too, and encourage them to make speculative applications - no free iPad on offer for them, but that's not really the point. The point is, everyone should apply to work here! It's that good. We overhear someone ask if 'these vouchers really work?' They do. There's no catch. The free IPad? Again, no catch. If that's what it takes to get talented engineers through our doors for an interview, then that's all good. Once they see where we work and how we work, we think they'll want to come and work with us. The following day, Red Gate decides to repeat the offer, and that means more hard work, this time at The Castle pub. Another landlord that mishears 'mineral water' and serves me a beer. There are many more people clutching the printed vouchers and they all seem very happy to be getting a free lunch from Red Gate. "Come and work for us" we suggest, "lunch is always free!" So if you're a talented engineer, like free lunches and want a free iPad, you know what to do.

    Read the article

  • New Whitepaper: Oracle WebLogic Clustering

    - by ACShorten
    A new whitepaper is available that outlines the concepts and steps on implementing web application server clustering using the Oracle Utilities Application Framework and Oracle WebLogic Server. The whitepaper include the following: A short discussion on the concepts of clustering How to setup a cluster using Oracle WebLogic's utilities How to configure the Oracle Utilities Application Framework to take advantage of clustering How to deploy the Oracle Utilities Application based products in a clustered environment Common cluster operations The whitepaper is available from My Oracle Support at Doc Id: 1334558.1.

    Read the article

  • Developing Mobile Applications: Web, Native, or Hybrid?

    - by Michelle Kimihira
    Authors: Joe Huang, Senior Principal Product Manager, Oracle Mobile Application Development Framework  and Carlos Chang, Senior Principal Product Director The proliferation of mobile devices and platforms represents a game-changing technology shift on a number of levels. Companies must decide not only the best strategic use of mobile platforms, but also how to most efficiently implement them. Inevitably, this conversation devolves to the developers, who face the task of developing and supporting mobile applications—not a simple task in light of the number of devices and platforms. Essentially, developers can choose from the following three different application approaches, each with its own set of pros and cons. Native Applications: This refers to apps built for and installed on a specific platform, such as iOS or Android, using a platform-specific software development kit (SDK).  For example, apps for Apple’s iPhone and iPad are designed to run specifically on iOS and are written in Xcode/Objective-C. Android has its own variation of Java, Windows uses C#, and so on.  Native apps written for one platform cannot be deployed on another. Native apps offer fast performance and access to native-device services but require additional resources to develop and maintain each platform, which can be expensive and time consuming. Mobile Web Applications: Unlike native apps, mobile web apps are not installed on the device; rather, they are accessed via a Web browser.  These are server-side applications that render HTML, typically adjusting the design depending on the type of device making the request.  There are no program coding constraints for writing server-side apps—they can be written in Java, C, PHP, etc., it doesn’t matter.  Instead, the server detects what type of mobile browser is pinging the server and adjusts accordingly. For example, it can deliver fully JavaScript and CSS-enabled content to smartphone browsers, while downgrading gracefully to basic HTML for feature phone browsers. Mobile apps work across platforms, but are limited to what you can do through a browser and require Internet connectivity. For certain types of applications, these constraints may not be an issue. Oracle supports mobile web applications via ADF Faces (for tablets) and ADF Mobile browser (Trinidad) for smartphone and feature phones. Hybrid Applications: As the name implies, hybrid apps combine technologies from native and mobile Web apps to gain the benefits each. For example, these apps are installed on a device, like their pure native app counterparts, while the user interface (UI) is based on HTML5.  This UI runs locally within the native container, which usually leverages the device’s browser engine.  The advantage of using HTML5 is a consistent, cross-platform UI that works well on most devices.  Combining this with the native container, which is installed on-device, provides mobile users with access to local device services, such as camera, GPS, and local device storage.  Native apps may offer greater flexibility in integrating with device native services.  However, since hybrid applications already provide device integrations that typical enterprise applications need, this is typically less of an issue.  The new Oracle ADF Mobile release is an HTML5 and Java hybrid framework that targets mobile app development to iOS and Android from one code base. So, Which is the Best Approach? The short answer is – the best choice depends on the type of application you are developing.  For instance, animation-intensive apps such as games would favor native apps, while hybrid applications may be better suited for enterprise mobile apps because they provide multi-platform support. Just for starters, the following issues must be considered when choosing a development path. Application Complexity: How complex is the application? A quick app that accesses a database or Web service for some data to display?  You can keep it simple, and a mobile Web app may suffice. However, for a mobile/field worker type of applications that supports mission critical functionality, hybrid or native applications are typically needed. Richness of User Interactivity: What type of user experience is required for the application?  Mobile browser-based app that’s optimized for mobile UI may suffice for quick lookup or productivity type of applications.  However, hybrid/native application would typically be required to deliver highly interactive user experiences needed for field-worker type of applications.  For example, interactive BI charts/graphs, maps, voice/email integration, etc.  In the most extreme case like gaming applications, native applications may be necessary to deliver the highly animated and graphically intensive user experience. Performance: What type of performance is required by the application functionality?  For instance, for real-time look up of data over the network, mobile app performance depends on network latency and server infrastructure capabilities.  If consistent performance is required, data would typically need to be cached, which is supported on hybrid or native applications only. Connectivity and Availability: What sort of connectivity will your application require? Does the app require Web access all the time in order to always retrieve the latest data from the server? Or do the requirements dictate offline support? While native and hybrid apps can be built to operate offline, Web mobile apps require Web connectivity. Multi-platform Requirements: The terms “consumerization of IT” and BYOD (bring your own device) effectively mean that the line between the consumer and the enterprise devices have become blurred. Employees are bringing their personal mobile devices to work and are often expecting that they work in the corporate network and access back-office applications.  Even if companies restrict access to the big dogs: (iPad, iPhone, Android phones and tablets, possibly Windows Phone and tablets), trying to support each platform natively will require increasing resources and domain expertise with each new language/platform. And let’s not forget the maintenance costs, involved in upgrading new versions of each platform.   Where multi-platform support is needed, Web mobile or hybrid apps probably have the advantage. Going native, and trying to support multiple operating systems may be cost prohibitive with existing resources and developer skills. Device-Services Access:  If your app needs to access local device services, such as the camera, contacts app, accelerometer, etc., then your choices are limited to native or hybrid applications.   Fragmentation: Apple controls Apple iOS and the only concern is what version iOS is running on any given device.   Not so Android, which is open source. There are many, many versions and variants of Android running on different devices, which can be a nightmare for app developers trying to support different devices running different flavors of Android.  (Is it an Amazon Kindle Fire? a Samsung Galaxy?  A Barnes & Noble Nook?) This is a nightmare scenario for native apps—on the other hand, a mobile Web or hybrid app, when properly designed, can shield you from these complexities because they are based on common frameworks.  Resources: How many developers can you dedicate to building and supporting mobile application development?  What are their existing skills sets?  If you’re considering native application development due to the complexity of the application under development, factor the costs of becoming proficient on a each platform’s OS and programming language. Add another platform, and that’s another language, another SDK. On the other side of the equation, Web mobile or hybrid applications are simpler to make, and readily support more platforms, but there may be performance trade-offs. Conclusion This only scratches the surface. However, I hope to have suggested some food for thought in choosing your mobile development strategy.  Do your due diligence, search the Web, read up on mobile, talk to peers, attend events. The development team at Oracle is working hard on mobile technologies to help customers extend enterprise applications to mobile faster and effectively.  To learn more on what Oracle has to offer, check out the Oracle ADF Mobile (hybrid) and ADF Faces/ADF Mobile browser (Web Mobile) solutions from Oracle.   Additional Information Blog: ADF Blog Product Information on OTN: ADF Mobile Product Information on Oracle.com: Oracle Fusion Middleware Follow us on Twitter and Facebook Subscribe to our regular Fusion Middleware Newsletter

    Read the article

  • Oracle Partner Deutschland @ Facebook: Gewinner des iPad2

    - by A&C Redaktion
    Auf dem OPN Day Satellite in Frankfurt haben wir unter allen Fans des Facebook-Profils von Oracle Alliances & Channel Deutschland ein iPad 2 verlost: Wer bis zum 8. November 2011, 16 Uhr den "Gefällt mir"-Button angeklickt hatte, nahm an unserer Verlsung teil. Und..... der glückliche Gewinner ist: Markus Meyer vom Oracle Partner Tonbeller AG!Wir gratulieren ganz herzlich und wünschen viel Freude mit dem neuen iPad!!!!

    Read the article

  • Generic log analyzer that produces reports

    - by Eugene
    About 600 customers use our application. We have very detailed logs for everything that happens in the application, from changes in the data model, memory and CPU/GPU usage to clicks on the UI elements. We want to be able to parse the logs coming from these customers and analyze them to understand how users use our application and what happens internally in the application. Is there a log analyzer that can produce such reports automatically?

    Read the article

  • Consolidating Oracle E-Business Suite R12 on Oracle's SPARC SuperCluster

    - by Giri Mandalika
    An Optimized Solution for Oracle E-Business Suite (EBS) R12 12.1.3 is now available on oracle.com.     The Oracle Optimized Solution for Oracle E-Business Suite This solution was centered around the engineered system, SPARC SuperCluster T4-4. Check the business and technical white papers along with a bunch of relevant useful resources online at the above optimized solution page for EBS. What is an Optimized Solution? Oracle's Optimized Solutions are designed, tested and fully documented architectures that are tuned for optimal performance and availability. Optimized solutions are NOT pre-packaged, fully tuned, ready-to-install software bundles that can be downloaded and installed. An optimized solution is usually a well documented architecture that was thoroughly tested on a target platform. The technical white paper details the deployed application architecture along with various observations from installing the application on target platform to its behavior and performance in highly available and scalable configurations. Oracle E-Business Suite R12 Use Case Multiple E-Business Suite R12 12.1.3 application modules were tested in this optimized solution -- Financials (online - oracle forms & web requests), Order Management (online - oracle forms & web req uests) and HRMS (online - web requests & payroll batch). The solution will be updated with additional application modules, when they are available. Oracle Solaris Cluster is responsible for the high availability portion of the solution. Performance Data For the sake of completeness, test results were also documented in the optimized solution white paper. Those test results are mainly for educational purposes only. They give good sense of application behavior under the circumstances the application was tested. Since the major focus of the optimized solution is around highly available and scalable configurations, the application was configured to me et those criteria. Hence the documented test results are not directly comparable to any other E-Business Suite performance test results published by any vendor including Oracle. Such an attempt may lead to skewed, incorrect conclusions. Questions & Requests Feel free to direct your questions to the author of the white papers. If you are a potential customer who would like to test a specific E-Business Suite application module on any non-engineered syste m such as SPARC T4-X or engineered system such as SPARC SuperCluster, contact Oracle Solution Center.

    Read the article

  • JavaOne Session Report: “50 Tips in 50 Minutes for GlassFish Fans”

    - by Janice J. Heiss
    At JavaOne 2012 on Monday, Oracle’s Engineer Chris Kasso, and Technology Evangelist Arun Gupta, presented a head-spinning session (CON4701) in which they offered 50 tips for GlassFish fans. Kasso and Gupta alternated back and forth with each presenting 10 tips at a time. An audience of about (appropriately) 50 attentive and appreciative developers was on hand in what has to be one of the most information-packed sessions ever at JavaOne!Aside: I experienced one of the quiet joys of JavaOne when, just before the session began, I spotted Java Champion and JavaOne Rock Star Adam Bien sitting nearby – Adam is someone I have been fortunate to know for many years.GlassFish is a freely available, commercially supported Java EE reference implementation. The session prioritized quantity of tips over depth of information and offered tips that are intended for both seasoned and new users, that are meant to increase the range of functional options available to GlassFish users. The focus was on lesser-known dimensions of GlassFish. Attendees were encouraged to pursue tips that contained new information for them. All 50 tips can be accessed here.Below are several examples of more elaborate tips and a final practical tip on how to get in touch with these folks. Tip #1: Using the login Command * To execute a remote command with asadmin you must provide the admin's user name and password.* The login command allows you to store the login credentials to be reused in subsequent commands.* Can be logged into multiple servers (distinguish by host and port). Example:     % asadmin --host ouch login     Enter admin user name [default: admin]>     Enter admin password>     Login information relevant to admin user name [admin]     for host [ouch] and admin port [4848] stored at     [/Users/ckasso/.asadminpass] successfully.     Make sure that this file remains protected.     Information stored in this file will be used by     asadmin commands to manage the associated domain.     Command login executed successfully.     % asadmin --host ouch list-clusters     c1 not running     Command list-clusters executed successfully.Tip #4: Using the AS_DEBUG Env Variable* Environment variable to control client side debug output* Exposes: command processing info URL used to access the command:                           http://localhost:4848/__asadmin/uptime Raw response from the server Example:   % export AS_DEBUG=true  % asadmin uptime  CLASSPATH= ./../glassfish/modules/admin-cli.jar  Commands: [uptime]  asadmin extension directory: /work/gf-3.1.2/glassfish3/glassfish/lib/asadm      ------- RAW RESPONSE  ---------   Signature-Version: 1.0   message: Up 7 mins 10 secs   milliseconds_value: 430194   keys: milliseconds   milliseconds_name: milliseconds   use-main-children-attribute: false   exit-code: SUCCESS  ------- RAW RESPONSE  ---------Tip #11: Using Password Aliases * Some resources require a password to access (e.g. DB, JMS, etc.).* The resource connector is defined in the domain.xml.Example:Suppose the DB resource you wish to access requires an entry like this in the domain.xml:     <property name="password" value="secretp@ssword"/>But company policies do not allow you to store the password in the clear.* Use password aliases to avoid storing the password in the domain.xml* Create a password alias:     % asadmin create-password-alias DB_pw_alias     Enter the alias password>     Enter the alias password again>     Command create-password-alias executed successfully.* The password is stored in domain's encrypted keystore.* Now update the password value in the domain.xml:     <property name="password" value="${ALIAS=DB_pw_alias}"/>Tip #21: How to Start GlassFish as a Service * Configuring a server to automatically start at boot can be tedious.* Each platform does it differently.* The create-service command makes this easy.   Windows: creates a Windows service Linux: /etc/init.d script Solaris: Service Management Facility (SMF) service * Must execute create-service with admin privileges.* Can be used for the DAS or instances* Try it first with the --dry-run option.* There is a (unsupported) _delete-serverExample:     # asadmin create-service domain1     The Service was created successfully. Here are the details:     Name of the service:application/GlassFish/domain1     Type of the service:Domain     Configuration location of the service:/work/gf-3.1.2.2/glassfish3/glassfish/domains     Manifest file location on the system:/var/svc/manifest/application/GlassFish/domain1_work_gf-3.1.2.2_glassfish3_glassfish_domains/Domain-service-smf.xml.     You have created the service but you need to start it yourself. Here are the most typical Solaris commands of interest:     * /usr/bin/svcs  -a | grep domain1  // status     * /usr/sbin/svcadm enable domain1 // start     * /usr/sbin/svcadm disable domain1 // stop     * /usr/sbin/svccfg delete domain1 // uninstallTip #34: Posting a Command via REST* Use wget/curl to execute commands on the DAS.Example:  Deploying an application   % curl -s -S \       -H 'Accept: application/json' -X POST \       -H 'X-Requested-By: anyvalue' \       -F id=@/path/to/application.war \       -F force=true http://localhost:4848/management/domain/applications/application* Use @ before a file name to tell curl to send the file's contents.* The force option tells GlassFish to force the deployment in case the application is already deployed.* Use wget/curl to execute commands on the DAS.Example:  Deploying an application   % curl -s -S \       -H 'Accept: application/json' -X POST \       -H 'X-Requested-By: anyvalue' \       -F id=@/path/to/application.war \       -F force=true http://localhost:4848/management/domain/applications/application* Use @ before a file name to tell curl to send the file's contents.* The force option tells GlassFish to force the deployment in case the application is already deployed.Tip #46: Upgrading to a Newer Version * Upgrade applications and configuration from an earlier version* Upgrade Tool: Side-by-side upgrade– GUI: asupgrade– CLI: asupgrade --c– What happens ?* Copies older source domain -> target domain directory* asadmin start-domain --upgrade* Update Tool and pkg: In-place upgrade– GUI: updatetool, install all Available Updates– CLI: pkg image-update– Upgrade the domain* asadmin start-domain --upgradeTip #50: How to reach us?* GlassFish Forum: http://www.java.net/forums/glassfish/glassfish* [email protected]* @glassfish* facebook.com/glassfish* youtube.com/GlassFishVideos* blogs.oracle.com/theaquariumArun Gupta acknowledged that their method of presentation was experimental and actively solicited feedback about the session. The best way to reach them is on the GlassFish user forum.In addition, check out Gupta’s new book Java EE 6 Pocket Guide.

    Read the article

  • Clouds Everywhere But not a Drop of Rain – Part 3

    - by sxkumar
    I was sharing with you how a broad-based transformation such as cloud will increase agility and efficiency of an organization if process re-engineering is part of the plan.  I have also stressed on the key enterprise requirements such as “broad and deep solutions, “running your mission critical applications” and “automated and integrated set of capabilities”. Let me walk you through some key cloud attributes such as “elasticity” and “self-service” and what they mean for an enterprise class cloud. I will also talk about how we at Oracle have taken a very enterprise centric view to developing cloud solutions and how our products have been specifically engineered to address enterprise cloud needs. Cloud Elasticity and Enterprise Applications Requirements Easy and quick scalability for a short-period of time is the signature of cloud based solutions. It is this elasticity that allows you to dynamically redistribute your resources according to business priorities, helps increase your overall resource utilization, and reduces operational costs by allowing you to get the most out of your existing investment. Most public clouds are offering a instant provisioning mechanism of compute power (CPU, RAM, Disk), customer pay for the instance-hours(and bandwidth) they use, adding computing resources at peak times and removing them when they are no longer needed. This type of “just-in-time” serving of compute resources is well known for mid-tiers “state less” servers such as web application servers and web servers that just need another machine to start and run on it but what does it really mean for an enterprise application and its underlying data? Most enterprise applications are not as quite as “state less” and justifiably so. As such, how do you take advantage of cloud elasticity and make it relevant for your enterprise apps? This is where Cloud meets Grid Computing. At Oracle, we have invested enormous amount of time, energy and resources in creating enterprise grid solutions. All our technology products offer built-in elasticity via clustering and dynamic scaling. With products like Real Application Clusters (RAC), Automatic Storage Management, WebLogic Clustering, and Coherence In-Memory Grid, we allow all your enterprise applications to benefit from Cloud elasticity –both vertically and horizontally - without requiring any application changes. A number of technology vendors take a rather simplistic route of starting up additional or removing unneeded VM as the "Cloud Scale-Out" solution. While this may work for stateless mid-tier servers where load balancers can handle the addition and remove of instances transparently but following a similar approach for the database tier - often called as "database sharding" - requires significant application modification and typically does not work with off the shelf packaged applications. Technologies like Oracle Database Real Application Clusters, Automatic Storage Management, etc. on the other hand bring the benefits of incremental scalability and on-demand elasticity to ANY application by providing a simplified abstraction layers where the application does not need deal with data spread over multiple database instances. Rather they just talk to a single database and the database software takes care of aggregating resources across multiple hardware components. It is the technologies like these that truly make a cloud solution relevant for enterprises.  For customers who are looking for a next generation hardware consolidation platform, our engineered systems (e.g. Exadata, Exalogic) not only provide incredible amount of performance and capacity, they also reduce the data center complexity and simplify operations. Assemble, Deploy and Manage Enterprise Applications for Cloud Products like Oracle Virtual assembly builder (OVAB) resolve the complex problem of bringing the cloud speed to complex multi-tier applications. With assemblies, you can not only provision all components of a multi-tier application and wire them together by push of a button, other aspects of application lifecycle, such as real-time application testing, scale-up/scale-down, performance and availability monitoring, etc., are also automated using Oracle Enterprise Manager.  An essential criteria for an enterprise cloud to succeed is the ability to ensure business service levels especially when business users have either full visibility on the usage cost with a “show back” or a “charge back”. With Oracle Enterprise Manager 12c, we have created the most comprehensive cloud management solution in the industry that is capable of managing business service levels “applications-to-disk” in a enterprise private cloud – all from a single console. It is the only cloud management platform in the industry that allows you to deliver infrastructure, platform and application cloud services out of the box. Moreover, it offers integrated and complete lifecycle management of the cloud - including planning and set up, service delivery, operations management, metering and chargeback, etc .  Sounds unbelievable? Well, just watch this space for more details on how Oracle Enterprise Manager 12c is the nerve center of Oracle Cloud! Our cloud solution portfolio is also the broadest and most deep in the industry  - covering public, private, hybrid, Infrastructure, platform and applications clouds. It is no coincidence therefore that the Oracle Cloud today offers the most comprehensive set of public cloud services in the industry.  And to a large part, this has been made possible thanks to our years on investment in creating cloud enabling technologies.  Summary  But the intent of this blog post isn't to dwell on how great our solutions are (these are just some examples to illustrate how we at Oracle have approached this problem space). Rather it is to help you ask the right questions before you embark on your cloud journey.  So to summarize, here are the key takeaways.       It is critical that you are clear on why you are building the cloud. Successful organizations keep business benefits as the first and foremost cloud objective. On the other hand, those who approach this purely as a technology project are more likely to fail. Think about where you want to be in 3-5 years before you get started. Your long terms objectives should determine what your first step ought to be. As obvious as it may seem, more people than not make the first move without knowing where they are headed.  Don’t make the mistake of equating cloud to virtualization and Infrastructure-as-a-Service (IaaS). Spinning a VM on-demand will give some short term relief to your IT staff but is unlikely to solve your larger business problems. As such, even if IaaS is your first step towards a more comprehensive cloud, plan the roadmap around those higher level services before you begin. And ask your vendors on how they are going to be your partners in this journey. Capabilities like self-service access and chargeback/showback are absolutely critical if you really expect your cloud to be transformational. Your business won't see the full benefits of the cloud until it empowers them with same kind of control and transparency that they are used to while using a public cloud service.  Evaluate the benefits of integration, as opposed to blindly following the best-of-breed strategy. Integration is a huge challenge and more so in a cloud environment. There are enormous costs associated with stitching a solution out of disparate components and even more in maintaining it. Hope you found these ideas helpful. Looking forward to hearing your thoughts and experiences.

    Read the article

  • Part 3 of 4 : Tips/Tricks for Silverlight Developers.

    - by mbcrump
    Part 1 | Part 2 | Part 3 | Part 4 I wanted to create a series of blog post that gets right to the point and is aimed specifically at Silverlight Developers. The most important things I want this series to answer is : What is it?  Why do I care? How do I do it? I hope that you enjoy this series. Let’s get started: Tip/Trick #11) What is it? Underline Text in a TextBlock. Why do I care? I’ve seen people do some crazy things to get underlined text in a Silverlight Application. In case you didn’t know there is a property for that. How do I do it: On a TextBlock you have a property called TextDecorations. You can easily set this property in XAML or CodeBehind with the following snippet: <UserControl x:Class="SilverlightApplication19.MainPage" xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml" xmlns:d="http://schemas.microsoft.com/expression/blend/2008" xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006" mc:Ignorable="d" d:DesignHeight="300" d:DesignWidth="400"> <Grid x:Name="LayoutRoot" Background="White"> <TextBlock Name="txtTB" Text="MichaelCrump.NET" TextDecorations="Underline" /> </Grid> </UserControl> or you can do it in CodeBehind… txtTB.TextDecorations = TextDecorations.Underline;   Tip/Trick #12) What is it? Get the browser information from a Silverlight Application. Why do I care? This will allow you to program around certain browser conditions that otherwise may not be aware of. How do I do it: It is very easy to extract Browser Information out a Silverlight Application by using the BrowserInformation class. You can copy/paste this code snippet to have access to all of them. string strBrowserName = HtmlPage.BrowserInformation.Name; string strBrowserMinorVersion = HtmlPage.BrowserInformation.BrowserVersion.Minor.ToString(); string strIsCookiesEnabled = HtmlPage.BrowserInformation.CookiesEnabled.ToString(); string strPlatform = HtmlPage.BrowserInformation.Platform; string strProductName = HtmlPage.BrowserInformation.ProductName; string strProductVersion = HtmlPage.BrowserInformation.ProductVersion; string strUserAgent = HtmlPage.BrowserInformation.UserAgent; string strBrowserVersion = HtmlPage.BrowserInformation.BrowserVersion.ToString(); string strBrowserMajorVersion = HtmlPage.BrowserInformation.BrowserVersion.Major.ToString(); Tip/Trick #13) What is it? Always check the minRuntimeVersion after creating a new Silverlight Application. Why do I care? Whenever you create a new Silverlight Application and host it inside of an ASP.net website you will notice Visual Studio generates some code for you as shown below. The minRuntimeVersion value is set by the SDK installed on your system. Be careful, if you are playing with beta’s like “Lightswitch” because you will have a higher version of the SDK installed. So when you create a new Silverlight 4 project and deploy it your customers they will get a prompt telling them they need to upgrade Silverlight. They also will not be able to upgrade to your version because its not released to the public yet. How do I do it: Open up the .aspx or .html file Visual Studio generated and look for the line below. Make sure it matches whatever version you are actually targeting. Tip/Trick #14) What is it? The VisualTreeHelper class provides useful methods for involving nodes in a visual tree. Why do I care? It’s nice to have the ability to “walk” a visual tree or to get the rendered elements of a ListBox. I have it very useful for debugging my Silverlight application. How do I do it: Many examples exist on the web, but say that you have a huge Silverlight application and want to find the parent object of a control.  In the code snippet below, we would get 3 MessageBoxes with (StackPanel first, Grid second and UserControl Third). This is a tiny application, but imagine how helpful this would be on a large project. <UserControl x:Class="SilverlightApplication18.MainPage" xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation" xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml" xmlns:d="http://schemas.microsoft.com/expression/blend/2008" xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006" mc:Ignorable="d" d:DesignHeight="300" d:DesignWidth="400"> <Grid x:Name="LayoutRoot" Background="White"> <StackPanel> <Button Content="Button" Height="23" Name="button1" VerticalAlignment="Top" Width="75" Click="button1_Click" /> </StackPanel> </Grid> </UserControl> private void button1_Click(object sender, RoutedEventArgs e) { DependencyObject obj = button1; while ((obj = VisualTreeHelper.GetParent(obj)) != null) { MessageBox.Show(obj.GetType().ToString()); } } Tip/Trick #15) What is it? Add ChildWindows to your Silverlight Application. Why do I care? ChildWindows are a great way to direct a user attention to a particular part of your application. This could be used when saving or entering data. How do I do it: Right click your Silverlight Application and click Add then New Item. Select Silverlight Child Window as shown below. Add an event and call the ChildWindow with the following snippet below: private void button1_Click(object sender, RoutedEventArgs e) { ChildWindow1 cw = new ChildWindow1(); cw.Show(); } Your main application can still process information but this screen forces the user to select an action before proceeding. The code behind of the ChildWindow will look like the following: namespace SilverlightApplication18 { public partial class ChildWindow1 : ChildWindow { public ChildWindow1() { InitializeComponent(); } private void OKButton_Click(object sender, RoutedEventArgs e) { this.DialogResult = true; //TODO: Add logic to save what the user entered. } private void CancelButton_Click(object sender, RoutedEventArgs e) { this.DialogResult = false; } } } Thanks for reading and please come back for Part 4.  Subscribe to my feed CodeProject

    Read the article

  • Marché des tablettes : Apple perd des parts tandis que Samsung gagne du terrain

    Marché des tablettes : Apple perd des parts tandis que Samsung gagne du terrain La croissance a encore ralenti au troisième trimestre sur un marché mondial des tablettes où les parts de l'iPad d'Apple n'ont jamais été aussi basses à en croire les estimations du cabinet de recherche IDC. Le marché enregistre une forte croissance annuelle (+ 36,7%) correspondant à 47,6 millions d'unités livrées.Avec seulement 14,1 millions d'unités vendues, la part de marché de l'iPad tombe à 29,6% contre 32,4%...

    Read the article

  • How to check areas to load in ASP.NET MVC?

    - by user1741807
    I have a ASP.NET MVC application which uses areas for the different features of the application. It should display different features dependent on which version of the application the customer have. I need to check which areas to display. But how do I check which areas to display? Is it just to wrap the menu in an if statement to check if the customer have a version of the application that is allowed to see the area?

    Read the article

  • Benefits and Future of Web Applications

    A web application is an application that is contacted in excess of a network such as the Internet or an intranet. The term should also mean a computer software application that is hosted in a browser-controlled environment or coded in a browser-supported language and dependent on a frequent web browser to provide the application executable.

    Read the article

  • ???????!11g R2 RAC ????

    - by M.Morozumi
    ??(2012?4?12?)OPN ?????????(OPN Certified Specialist)??????Oracle Database 11g???????????????? ???:Oracle Certified Expert, Oracle Real Application Clusters 11g and Grid Infrastructure Administrator ???:Oracle Real Application Clusters 11g Release 2 and Grid Infrastructure Administration (1Z0-058) ?????????Oracle Certified Expert, Oracle Real Application Clusters 11g and Grid Infrastructure Administrator ???????????????????? ?Oracle Certified Expert, Oracle Real Application Clusters 11g and Grid Infrastructure Administrator?????????????5? ????Oracle University? Web???????????????????????? ????????????????????! ?????????????????

    Read the article

  • Why do my Application Compatibility Toolkit Data Collectors fail to write to my ACT Log Share?

    - by Jay Michaud
    I am trying to get the Microsoft Application Compatibility Toolkit 5.6 (version 5.6.7320.0) to work, but I cannot get the Data Collectors to write to the ACT Log Share. The configuration is as follows. Machine: ACT-Server Domain: mydomain.example.com OS: Windows 7 Enterprise 64-bit Edition Windows Firewall configuration: File and Printer Sharing (SMB-In) is enabled for Public, Domain, and Private networks ACT Log Share: ACT Share permissions*: Group/user names Allow permissions --------------------------------------- Everyone Full Control Administrator Full Control Domain Admins Full Control Administrators Full Control ANONYMOUS LOGON Full Control Folder permissions*: Group/user name Allow permissions Apply to ------------------------------------------------- ANONYMOUS LOGON Read, write & execute This folder, subfolders, and files Domain Admins Full control This folder, subfolders, and files Everyone Read, write & execute This folder, subfolders, and files Administrators Full control This folder, subfolders, and files CREATOR OWNER Full control Subfolders and files SYSTEM Full control This folder, subfolders, and files INTERACTIVE Traverse folder / This folder, subfolders, and files execute file, List folder / read data, Read attributes, Read extended attributes, Create files / write data, Create folders / append data, Write attributes, Write extended attributes, Delete subfolders and files, Delete, Read permissions SERVICE (same as INTERACTIVE) BATCH (same as INTERACTIVE) *I am fully aware that these permissions are excessive, but that is beside the point of this question. Some of the clients running the Data Collector are domain members, but some are not. I am working under the assumption that this is a Windows file sharing permission issue or a network access policy issue, but of course, I could be wrong. It is my understanding that the Data Collector runs in the security context of the SYSTEM account, which for domain members appears on the network as MYDOMAIN\machineaccount. It is also my understanding from reading numerous pieces of documentation that setting the ANONYMOUS LOGON permissions as I have above should allow these computer accounts and non-domain-joined computers to access the share. To test connectivity, I set up the Windows XP Mode virtual machine (VM) on ACT-Server. In the VM, I opened a command prompt running as SYSTEM (using the old "at" command trick). I used this command prompt to run explorer.exe. In this Windows Explorer instance, I typed \ACT-Server\ACT into the address bar, and then I was prompted for logon credentials. The goal, though, was not to be prompted. I also used the "net use /delete" command in the command prompt window to delete connections to the ACT-Server\IPC$ share each time my connection attempt failed. I have made sure that the appropriate exceptions are Since ACT-Server is a domain member, the "Network access: Sharing and security model for local accounts" security policy is set to "Classic - local users authenticate as themselves". In spite of this, I still tried enabling the Guest account and adding permissions for it on the share to no effect. What am I missing here? How do I allow anonymous logons to a shared folder as a step toward getting my ACT Data Collectors to deposit their data correctly? Am I even on the right track, or is the issue elsewhere?

    Read the article

  • How to check database has not been unmounted/ marked for overwrite

    - by RPS
    Hi When restoring Exchange with use of VSS API try to catch errors in cases: 1) when restoring database has not been unmounted Exchange 2010 generate error on PreRestore call and write error to Windows Application log -all ok , but for Exchange2007 PreRestore succeded and write error toWindows Application log only 2)when restored database has been unmounted but has not been marked for overwrite Exchange 2007/2010 generate error to Windows Application log but PreRestore call succeded How can I know from application (via VSS API - not from Windows Application log) that error has happend (database has not been unmounted and has not been marked for overwrite. ) Thanks

    Read the article

  • How to extract file paths out of drag and drop event?

    - by trismarck
    I have this application that lists files in a WindowsForms listbox (NET framework). The application does not support the copy operation if multiple files are selected in the listbox, but at the same time, the application supports 'drag and drop' event for multiple files (allows dragging the files 'out of the application'). How can I extract the paths of the files 'dragged out of the application'? (i.e. I drop the files on some program / script that shows me the paths / saves the paths to a txt file).

    Read the article

  • How to make an extremely old app run on 64bit Windows?

    - by Jerry Dodge
    I have a very old application designed for Windows 3.1. I have been able to use this application on Windows 7, however, that was Windows 7 32bit. Now I have since re-installed Windows to 64bit, and this application does not work, saying it's incompatible. I have tried running the application (and its other side-applications) in Windows '95 mode, but still the same message. How can I run this old app on 64bit Windows? For the record, the application is a game called "Sim Tower"

    Read the article

  • Delphi 2009: How do I prevent network application from leaking critical section?

    - by eed3si9n
    As part of Vista certification, Microsoft wants to make sure that an application exits without holding on to a lock (critical section): TEST CASE 31. Verify application does not break into a debugger with the specified AppVerifier checks (Req:3.2) As it turns out, network applications built using Delphi 2009 does break into the debugger, which displays unhelpful message as follows: (1214.1f10): Break instruction exception - code 80000003 (first chance) eax=00000001 ebx=07b64ff8 ecx=a6450000 edx=0007e578 esi=0017f7e0 edi=80000003 eip=77280004 esp=0017f780 ebp=0017f7ac iopl=0 nv up ei pl zr na pe nc cs=0023 ss=002b ds=002b es=002b fs=0053 gs=002b efl=00000246 *** ERROR: Symbol file could not be found. Defaulted to export symbols for C:\Windows\SysWOW64\ntdll.dll - ntdll!DbgBreakPoint: 77280004 cc int 3 After hitting Go button several times, you come across the actual error: ======================================= VERIFIER STOP 00000212: pid 0x18A4: Freeing virtual memory containing an active critical section. 076CC5DC : Critical section address. 01D0191C : Critical section initialization stack trace. 075D0000 : Memory block address. 00140000 : Memory block size. ======================================= This verifier stop is continuable. After debugging it use `go' to continue. ======================================= Given that my code does not leak TCriticalSection, how do I prevent Delphi from doing so.

    Read the article

  • Coherent access to mainframe files from Win32 application and IBM RDZ/Eclipse?

    - by Ira Baxter
    I have a suite of tools for processing IBM COBOL source code; these tools are built as Win32 applications and talk to Windows (including network) files using traditional Windows file system calls (open, close, read, write) and work just fine, thank you. I'd like to integrate these with Eclipse; we understand how to get Eclipse to do UI for us we think. The problem is that Eclipse/RDZ users access mainframe files through some IBM magic. In How does RDZ access mainframe files I tried to understand how Eclipse accessed files on a mainframe. Apparantly Eclipse/RDZ has a secret filesystem access backdoor not available to normal mortals. At issue is how our tools, reading some Windows-accessible file (local disk file, NFS to mainframe, ...) can associate such files with the files that Eclipse can access or is using? Ideally we'd like UI-integrated versions of our tools take an Eclipse file-name string for a mainframe file, pass it to our Windows application to process, have the Windows application open/read/process the file, and return results associated with that file to the Eclipse UI. Is there a canonical file name path that would be used with mainframe NFS that would be equivalent to the name or access object the Eclipse RDZ used to access the same file? Are all operations doable internally by Eclipse, doable by the mainframe NFS [for instance, can NFS read/update an element in a partitioned data set? Can Eclipse RDZ? Does it matter?] Is the mainframe file access available to custom Java code running under Eclipse RDZ (e.g., equivalents of open/close/read/write based on filename/path/something?) If so, can somebody steer me towards documentation describing the access methods? Anybody else already solve this problem or have a good suggestion?

    Read the article

  • How do I manage application configuration in ASP.NET?

    - by GlennS
    I am having difficulty with managing configuration of an ASP.Net application to deploy for different clients. The sheer volume of different settings which need twiddling takes up large amounts of time, and the current configuration methods are too complicated to enable us to push this responsibility out to support partners. Any suggestions for better methods to handle this or good sources of information to research? How we do things at present: Various xml configuration files which are referenced in Web.Config, for example an AppSettings.xml. Configurations for specific sites are kept in duplicate configuration files. Text files containing lists of data specific to the site In some cases, manual one-off changes to the database C# configuration for Windsor IOC. The specific issues we are having: Different sites with different features enabled, different external services we have to talk to and different business rules. Different deployment types (live, test, training) Configuration keys change across versions (get added, remove), meaning we have to update all the duplicate files We still need to be able to alter keys while the application is running Our current thoughts on how we might approach this are: Move the configuration into dynamically compiled code (possibly Boo, Binsor or JavaScript) Have some form of diffing/merging configuration: combine a default config with a live/test/training config and a site-specific config

    Read the article

  • How do I log from inside my web application in Tomcat 6.

    - by Carlos
    How do I log from within my web application deployed on Tomcat 6? Where should I expect the logging output to go (internal tomcat log files, or will another logfile be generated)? I see a ton of documentation but am having a hard time finding a direct answer to the above questions. Where should I expect the logging to show up (currently it is log4j is not generating a log file and it is not showing up in my console). I am trying to follow http://www.laliluna.de/articles/log4j-tutorial.html . ### direct log messages to stdout ### log4j.appender.stdout=org.apache.log4j.ConsoleAppender log4j.appender.stdout.Target=System.out log4j.appender.stdout.layout=org.apache.log4j.PatternLayout log4j.appender.stdout.layout.ConversionPattern=%d{ABSOLUTE} %5p %c{1}:%L - %m%n ### file appender log4j.appender.file=org.apache.log4j.RollingFileAppender log4j.appender.file.maxFileSize=100KB log4j.appender.file.maxBackupIndex=5 log4j.appender.file.File=test.log log4j.appender.file.threshold=info log4j.appender.file.layout=org.apache.log4j.PatternLayout log4j.appender.file.layout.ConversionPattern=%d{ABSOLUTE} %5p %c{1}:%L - %m%n log4j.rootLogger=debug, stdout In my application I define a log object: private static org.apache.log4j.Logger log = Logger.getLogger(MyClass.class); log.error("LOGGING!"); Thanks for the help.

    Read the article

  • how to create Java Application and query about OWL using SPARQL/Jena and how to do it on local/remot

    - by user323889
    I want to create simple application using Java Jena and SPARQL ,that insert, delete , update and query the OWL/RDF data I worked on protege to create the ontology and noticed SPARQL in it but I want to use SPARQL using java and jena ... 1) I saw this thread and I knew how to use SPARQL with jena (after http)stackoverflow.com/questions/2267333/using-jena-to-create-a-sparql-query-on-dbpedia it did work with me .. but I want my own ontology to work .. I mean to upload it to server or to work on localhost or whatever ... 2) SPARQL doesn't support operations like update or insert .. but querying is there any other languages/methods that support these operations ? or I should created it manually in java in each application ... 3) how can I upload my ontology and I prefer something related to protege ? because I tried this which got bug : (after http )semweb.krasu.ru/protege2joseki/ and this (which gave me lot of issues) (after http and wwwdot)joseki.org/ nothing work .. 4) RDF-store ... is for just RDF ? because I am working on OWL files .. I mean for example using MySQL as RDF-store .. would it work for OWL concept ?

    Read the article

  • Are Large iPhone Ping Times Indicative of Application Latency?

    - by yar
    I am contemplating creating a realtime app where an iPod Touch/iPhone/iPad talks to a server-side component (which produces MIDI, and sends it onward within the host). When I ping my iPod Touch on Wifi I get huge latency (and a enormous variance, too): 64 bytes from 192.168.1.3: icmp_seq=9 ttl=64 time=38.616 ms 64 bytes from 192.168.1.3: icmp_seq=10 ttl=64 time=61.795 ms 64 bytes from 192.168.1.3: icmp_seq=11 ttl=64 time=85.162 ms 64 bytes from 192.168.1.3: icmp_seq=12 ttl=64 time=109.956 ms 64 bytes from 192.168.1.3: icmp_seq=13 ttl=64 time=31.452 ms 64 bytes from 192.168.1.3: icmp_seq=14 ttl=64 time=55.187 ms 64 bytes from 192.168.1.3: icmp_seq=15 ttl=64 time=78.531 ms 64 bytes from 192.168.1.3: icmp_seq=16 ttl=64 time=102.342 ms 64 bytes from 192.168.1.3: icmp_seq=17 ttl=64 time=25.249 ms Even if this is double what the iPhone-Host or Host-iPhone time would be, 15ms+ is too long for the app I'm considering. Is there any faster way around this (e.g., USB cable)? If not, would building the app on Android offer any other options? Traceroute reports more workable times: traceroute to 192.168.1.3 (192.168.1.3), 64 hops max, 52 byte packets 1 192.168.1.3 (192.168.1.3) 4.662 ms 3.182 ms 3.034 ms can anyone decipher this difference between ping and traceroute for me, and what they might mean for an application that needs to talk to (and from) a host?

    Read the article

  • how to implement login and service features as in skype or msn chat in a wpf application

    - by black sensei
    Hello Good people! I'm building an WPF application that connect to web services for its operations.Things that i needed to be working are so far fine.Now i'll like to improve use experience by adding features like username editable combobox, sign me in when skype start and start when computer start. I have a fair idea about each feature but very small knowledge about their implementation. Question 1 username combobox : i use a combobox with isEditable set to true but i think it doesnt have the previous username, would that mean that i have to store every successful login username in a sqlite for example? Question 2 sign me in when skype start : i think about using sqlite after all to store the credentials and store the value (as in true or false) if autologin has to be performed. Question 3 start when computer start : i know it's about having is as service.but the process of using it as a service and removing its service when checkbox is checked or unckecked is a bit confusing to me. Question 4 Please wait(signing in) of skype if i want to do things like please wait at login(login is over webservice) in a WPF application should i use a animated gif in a grid that i can show when hiding the login combobox and passwordbox grid or i should use an animated object(for which i have no knowledge about for now) ? This post in mainly for you experts to either point me to the right resource and tell me what is done as best practice. things like dos and dons.Thanks for reading this and please let me have a clair idea about how to start implementing those features. thanks again

    Read the article

  • How to avoid chaotic ASP.NET web application deployment?

    - by emzero
    Ok, so here's the thing. I'm developing an existing (it started being an ASP classic app, so you can imagine :P) web application under ASP.NET 4.0 and SQLServer 2005. We are 4 developers using local instances of SQL Server 2005 Express, having the source-code and the Visual Studio database project This webapp has several "universes" (that's how we call it). Every universe has its own database (currently on the same server) but they all share the same schema (tables, sprocs, etc) and the same source/site code. So manually deploying is really annoying, because I have to deploy the source code and then run the sql scripts manually on each database. I know that manual deploying can cause problems, so I'm looking for a way of automating it. We've recently created a Visual Studio Database Project to manage the schema and generate the diff-schema scripts with different targets. I don't have idea how to put the pieces together I would like to: Have a way to make a "sync" deploy to a target server (thanksfully I have full RDC access to the servers so I can install things if required). With "sync" deploy I mean that I don't want to fully deploy the whole application, because it has lots of files and I just want to deploy those new or changed. Generate diff-sql update scripts for every database target and combine it to just 1 script. For this I should have some list of the databases names somewhere. Copy the site files and executing the generated sql script in an easy and automated way. I've read about MSBuild, MS WebDeploy, NAnt, etc. But I don't really know where to start and I really want to get rid of this manual deploy. If there is a better and easier way of doing it than what I enumerated, I'll be pleased to read your option. I know this is not a very specific question but I've googled a lot about it and it seems I cannot figure out how to do it. I've never used any automation tool to deploy. Any help will be really appreciated, Thank you all, Regards

    Read the article

< Previous Page | 368 369 370 371 372 373 374 375 376 377 378 379  | Next Page >