Search Results

Search found 27143 results on 1086 pages for 'include path'.

Page 373/1086 | < Previous Page | 369 370 371 372 373 374 375 376 377 378 379 380  | Next Page >

• How do I install mod_dav_svn module on an Apache / MAMP server?

  - by fettereddingoskidney

  How do I install additional modules into my server configuration? Currently all of the other modules are installed in /Applications/MAMP/Library/modules...and I see that they are mod_*.so source files, but I cannot seem to get mine to end up here... :? I am trying to set up an SVN repository and use my Apache (MAMP) server to serve the repository. I am using the subversion installation that came (pre-installed?) on Mac OS X 10.5. The repository is working, but I cannot access it remotely through my MAMP server using a client program (Dreamweaver CS5). When I try, I get an error from Dreamweaver, saying: Cannot connect to host xxx: Connection refused. This, I believe, is because I have not properly configured my Apache server to serve the svn repository. So, I added the following lines to my httpd.conf file: <Location /subversion> DAV svn SVNPath /Applications/MAMP/htdocs/svn/ AuthType Basic AuthName "Subversion repository" AuthUserFile /applications/mamp/htdocs/.htpasswd Require ServerAdmin </Location> Restarted the server with the command $ /Applications/MAMP/Library/bin/apachectl -k restart I used this path because otherwise the default apachectl path is set to /usr/sbin/apachectl, which is the location of the pre-installed command on Mac OS X, since the OS comes packaged with a built-in Apache server. And I get the error: Syntax error on line 1153 of /Applications/MAMP/conf/apache/httpd.conf: Unknown DAV provider: svn I checked the upper portion of httpd.conf and see that dav_module (mod_dav.so) is loaded and is in fact in my the modules directory of my server. However, mod_dav_svn is not installed in that directory nor is it in the LoadModule portion of httpd.conf. So I need to install it, right? I have tried installing modules into my MAMP server before but was never successful...because I don't know how to do it. Can someone please walk me through how to install that module? Thanks for your time!

  Read the article

• WS2008 subst in Logon script does not "stick"

  - by Frans

  I have a terminal server environment exclusively with Windows Server 2008. My problem is that I need to "map" a drive letter to each users Temp folder. This is due to a legacy app that requries a separate Temp folder for each user but which does not understand %temp%. So, just add "subst t: %temp%" to the logon script, right? The problem is that, even though the command runs, the subst doesn't "stick" and the user doesn't get a T: drive. Here is what I have tried; The simplest version: 'Mapping a temp drive Set WinShell = WScript.CreateObject("WScript.Shell") WinShell.Run "subst T: %temp%", 2, True That didn't work, so tried this for more debug information: 'Mapping a temp drive Set WinShell = WScript.CreateObject("WScript.Shell") Set procEnv = WinShell.Environment("Process") wscript.echo(procEnv("TEMP")) tempDir = procEnv("TEMP") WinShell.Run "subst T: " & tempDir, 3, True This shows me the correct temp path when the user logs in - but still no T: Drive. Decided to resort to brute force and put this in my login script: 'Mapping a temp drive Set WinShell = WScript.CreateObject("WScript.Shell") WinShell.Run "\\domain\sysvol\esl.hosted\scripts\tempdir.cmd", 3, True where \domain\sysvol\esl.hosted\scripts\tempdir.cmd has this content: echo on subst t: %temp% pause When I log in with the above then the command window opens up and I can see the subst command being executed correctly, with the correct path. But still no T: drive. I have tried running all of the above scripts outside of a login script and they always work perfectly - this problem only occurs when doing it from inside a login script. I found a passing reference on an MSFN forum about a similar problem when the user is already logged on to another machine - but I have this problem even without being logged on to another machine. Any suggestion on how to overcome this will be much appreciated.

  Read the article

• Cannot write samba shares

  - by Batsu

  Running samba 3.5 on Red Hat Enterprise 6.1 I'm having issues sharing two folders. Here is the output of testparm: [global] workgroup = DOMAINNAME server string = Samba Server Version %v interfaces = lo, eth1 bind interfaces only = Yes map to guest = Bad User log file = /var/log/samba/log.%m max log size = 50 idmap uid = 16777216-33554431 idmap gid = 16777216-33554431 hosts allow = 10.50.183.48, 10.50.184.41, 10.50.184.199, 10.50.183.160, 127.0.0.1 hosts deny = 0.0.0.0/0 cups options = raw [test] comment = test folder path = /usr/local/samba valid users = claudio write list = claudio force user = claudio read only = No create mask = 0775 directory mask = 0775 [test2] comment = another test path = /home/claudio/tst valid users = claudio write list = claudio force user = claudio read only = No create mask = 0775 From the Windows XP machine I'm connecting from I'm able to read test but not write, while for test2 I can't even access the folder (though I can see it listed). ls -l /usr/local ... drwxrwxrwx. 2 claudio claudio 4096 Dec 3 10:39 samba ... ls -l /user/local/samba total 32 -rwxrwxrwx. 1 claudio claudio 9 Nov 29 16:26 asd.txt -rwxrwxrwx. 1 claudio claudio 728 Dec 3 10:16 out.txt ... ls -l /home/claudio/ ... drwxrwxr-x. 2 claudio claudio 4096 Dec 3 09:57 tst ... ls -l /home/claudio/tst total 4 -rw-rw-r--. 1 claudio claudio 4 Dec 3 09:57 asd.txt Any suggestion?

  Read the article

• Require and Includes not Functioning Nginx Fpm/FastCGI

  - by Vince Kronlein

  I've split up my FPM pools so that php will run under each individual user and set the routing correctly in my vhost.conf files to pass the proper port number. But I must have something incorrect in my environment because on this new domain I set up, require, require_once, include, include_once do not function, or rather, they may not be getting passed up to the interpreter to be rendered as php. Since I already have a Wordpress install on this server that runs perfectly, I'm pretty sure the error is in my server block for nginx. server { server_name www.domain.com; rewrite ^(.*) http://domain.com$1 permanent; } server { listen 80; server_name domain.com; client_max_body_size 500M; index index.php index.html index.htm; root /home/username/public_html; location / { try_files $uri $uri/ index.php; } location ~ \.php$ { if (!-e $request_filename) { rewrite ^(.*)$ /index.php?name=$1 break; } fastcgi_pass 127.0.0.1:9002; fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; include fastcgi_params; } location ~ /\.ht { deny all; } } The problem I'm finding I think is that there are dynamic calls to the doc root index file, while all calls to anything within a sub-folder should be routed as normal ie: NOT passed to index.php. I can't seem to find the right mix here. It should run like so: domain.com/cindy (file doesn't exist) --> index.php?name=$1 domain.com/admin/anyfile.php (files DO exist) --> admin/anyfile.php?$args

  Read the article

• Windows XP / Outlook 2003 error messages

  - by AboutDev

  Can anyone help with this issue? I am trying to help someone and could use some expertise. Error Message #1: Microsoft Office Small Business Edition 2003 With CD icon "The feature you are trying to use is on a CD-ROM or other removable disk that is not available. Insert the 'Microsoft Office Small Business Edition 2003' disk and click OK. Use source: Microsoft Office Small Business Edition 2003" 1st got this message after CD was inserted to recover partial file STDP11N. Recovered STDP11N, however, still receiving pop up window with error message each time outlook opens. Had accidentally cleaned up old programs and suddenly this was missing. Reinstalled Microsoft Office Small Business Edition 2003 using install CD. Outlook worked buit keep getting error message pop up each time I open Outlook. Hit ok. Error Message #2: The path 'Microsoft Office Small Business Edition 2003' cannot be found. Verify that you have access to this location and try again, or try to find the installation package 'STDP11N.MSI' in a folder from which you can install the product Microsoft Office Small Business Edition 2003." Hit ok. Back to error message #1 Hit close window Error message #3: Error 1706. Setup cannot find the required files. Check your connection to the network, or CD-ROM drive. For other potential solutions to this problem, see C:\Program Files\Microsoft Office\ OFFICE11\1033\SETUP.CHM Error message #4 I'd created a file under D: drive on an external drive. "The path specified for the file D:...etc.. .pst is not valid. Hit ok. Brings up window to look in My Documents.

  Read the article

• How to deploy website in IIS with a host name?

  - by Jayakumar

  I try to host my application in IIS. Below are the steps that I follow: Publish the code and place it in a path. Open IIS, right click on "sites" and select "Add Website". In that dialog I gave the site name and selected the app pool created for the application. I selected the physical path of the published code. I left the IP and port in the binding section without changes. and, finally, gave the host name as fus.km.com. When I try to browse the application the page is not Loading "Internet Explorer cannot display the Page" The machine domain is km.com UPDATE I tried to add the host name to the host file and flushed the DNS. The application asked for user credentials (I use windows Authentication in the application). But it did not login. On repeated tries it throws the error: HTTP Error 401.1 - Unauthorized You do not have permission to view this directory or page using the credentials that you supplied. I tried with different user to login but I get the same result.

  Read the article

• setting up git on cygwin - openssl

  - by Pete Field

  I'm trying to get git running in cygwin on a windows 7 machine I have git unpacked and the directory git-1.7.1.1 when i run make install from within that directory, I get CC fast-import.o In file included from builtin.h:4, from fast-import.c:147: git-compat-util.h:136:19: iconv.h: No such file or directory git-compat-util.h:140:25: openssl/ssl.h: No such file or directory git-compat-util.h:141:25: openssl/err.h: No such file or directory In file included from builtin.h:6, from fast-import.c:147: cache.h:9:21: openssl/sha.h: No such file or directory In file included from fast-import.c:156: csum-file.h:10: error: parse error before "SHA_CTX" csum-file.h:10: warning: no semicolon at end of struct or union csum-file.h:15: error: 'crc32' redeclared as different kind of symbol /usr/include/zlib.h:1285: error: previous declaration of 'crc32' was here csum-file.h:15: error: 'crc32' redeclared as different kind of symbol /usr/include/zlib.h:1285: error: previous declaration of 'crc32' was here csum-file.h:17: error: parse error before '}' token fast-import.c: In function `store_object': fast-import.c:995: error: `SHA_CTX' undeclared (first use in this function) fast-import.c:995: error: (Each undeclared identifier is reported only once fast-import.c:995: error: for each function it appears in.) fast-import.c:995: error: parse error before "c" fast-import.c:1000: warning: implicit declaration of function `SHA1_Init' fast-import.c:1000: error: `c' undeclared (first use in this function) fast-import.c:1001: warning: implicit declaration of function `SHA1_Update' fast-import.c:1003: warning: implicit declaration of function `SHA1_Final' fast-import.c: At top level: fast-import.c:1118: error: parse error before "SHA_CTX" fast-import.c: In function `truncate_pack': fast-import.c:1120: error: `to' undeclared (first use in this function) fast-import.c:1126: error: dereferencing pointer to incomplete type fast-import.c:1127: error: dereferencing pointer to incomplete type fast-import.c:1128: error: dereferencing pointer to incomplete type fast-import.c:1128: error: `ctx' undeclared (first use in this function) fast-import.c: In function `stream_blob': fast-import.c:1140: error: `SHA_CTX' undeclared (first use in this function) fast-import.c:1140: error: parse error before "c" fast-import.c:1154: error: `pack_file_ctx' undeclared (first use in this functio n) fast-import.c:1154: error: dereferencing pointer to incomplete type fast-import.c:1160: error: `c' undeclared (first use in this function) make: *** [fast-import.o] Error 1 I'm guessing that most of these errors are due to the iconv.h and openssl files which apparently are missing, but I can't figure out how I'm supposed to install those (if I am), or if there is some other way to get around this.

  Read the article

• How to move your Windows User Profile to another drive in Windows 8

  - by Mark

  I like to have my user folder on a different drive (D:) than my OS is (C:). Reading the following post I decided to give it a try. All went quite well, untill I found out that my Windows 8 Apps won't execute anymore (other than that I didn't noticed any problems). My apps do work, while using an account that isn't moved. In the eventviewer I've found error messages like these: App <Microsoft.MicrosoftSkyDrive> crashed with an unhandled Javascript exception. App details are as follows: Display Name:<SkyDrive>, AppUserModelId: <microsoft.microsoftskydrive_8wekyb3d8bbwe!Microsoft.MicrosoftSkyDrive> Package Identity:<microsoft.microsoftskydrive_16.4.4204.712_x64__8wekyb3d8bbwe> PID:<4452>. The details of the JavaScript exception are as follows Exception Name:<WinRT error>, Description:<Loading the state store failed. > , HTML Document Path:</modernskydrive/product/skydrive/App.html>, Source File Name:<ms-appx://microsoft.microsoftskydrive/jx/jx.js>, Source Line Number:<1>, Source Column Number:<27246>, and Stack Trace: ms-appx://microsoft.microsoftskydrive/jx/jx.js:1:27246 localSettings() ms-appx://microsoft.microsoftskydrive/jx/jx.js:1:51544 _initSettings() ms-appx://microsoft.microsoftskydrive/jx/jx.js:1:54710 getApplicationStatus(boolean) ms-appx://microsoft.microsoftskydrive/jx/jx.js:1:48180 init(object) ms-appx://microsoft.microsoftskydrive/jx/jx.js:1:45583 Application(number, boolean) ms-appx://microsoft.microsoftskydrive/modernskydrive/product/skydrive/App.html:216:13 Anonymous function(object) Using ProcMon, I see a lot of access denied messages, like these: Date & Time: 12-9-2012 9:32:20 Event Class: File System Operation: CreateFile Result: ACCESS DENIED Path: D:\Users\John\AppData\Local\Packages\microsoft.microsoftskydrive_8wekyb3d8bbwe\Settings\settings.dat TID: 2520 Duration: 0.0000149 Desired Access: Read Data/List Directory, Write Data/Add File, Read Control Disposition: OpenIf Options: Sequential Access, Synchronous IO Non-Alert, No Compression Attributes: N ShareMode: None AllocationSize: 0 Any idea how to solve this? I noticed that the app folders e.g.: D:\Users\john\AppData\Local\Packages\microsoft.microsoftskydrive_8wekyb3d8bbwe had a different owner than the old profile folder had. Old profile folder had john as owner where my new profile folder had the Administrators group as owner. Changing this didn't help unfortunately.

  Read the article

• Puppet - Is it possible to use a global var to pull in a template with the same name?

  - by Mike Purcell

  I'm new to puppet. As such I am trying to work my way around the best way to setup my manifests that make sense. Following the DRY (don't repeat yourself) principle, I am trying to load common directives in one template, then load in environment specific directives from a file matching the environment. Basically like this: # nodes.pp node base_dev { $service_env = 'dev' } node 'service1.ownij.lan' inherits base_dev { include global_env_specific } class global_env_specific { include shell::bash } # modules/shell/bash.pp class shell::bash inherits shell { notify{"Service env: ${service_env}": } file { '/etc/profile.d/custom_test.sh': content => template('_global/prefix.erb', 'shell/bash/global.erb', 'shell/bash/$service_env.erb'), mode => 644 } } But every time I run puppet agent --test puppet complains that it can't find the shell/bash/$service_env.erb file, but I double checked that it exists. I know the var is accessible due to the notify statement outputting the expected value, so I suspect I am doing which is not allowed. I know I could have a single template.erb and pass variables to the template, which would work in this case because the custom.sh file is small and not many changes across environments, but for more complex configs (httpd, solr, etc) I'd prefer to access environment specific files. I am also aware that I can specify environment specific module paths, but I'd prefer to just handle this behavior at the template level, instead of having several, closely named directories. Thanks.

  Read the article

• Where to put the SPF TXT record?

  - by YellowSquirrel

  I've set up Google apps for my domain: I've registered the domain with Google by adding the CNAME Google asked and I've apparently succesfully setup the MX Google mail servers. So far I haven't yet a dedicated server: I'm just having a domain at a registrar. Now I want to activate SPF and I'm confused. In the following short webpage: http://www.google.com/support/a/bin/answer.py?answer=178723 it is written that I must add a TXT record containing: v=spf1 include:_spf.google.com ~all Where should I enter this? Should this go in the zone (?) file, like I did for the CNAME and the MX records? So far I have something like this: @ 10800 IN A 217.42.42.42 @ 10800 IN MX 5 ASPMX3.GOOGLEMAIL.COM. @ 10800 IN MX 5 ASPMX2.GOOGLEMAIL.COM. @ 10800 IN MX 3 ALT2.ASPMX.L.GOOGLE.COM. @ 10800 IN MX 3 ALT1.ASPMX.L.GOOGLE.COM. @ 10800 IN MX 1 ASPMX.L.GOOGLE.COM. google8a70835987f31e34 10800 IN CNAME google.com. Does adding the SPF TXT record mean I should literally have something like that: @ 10800 IN A 217.42.42.42 @ 10800 IN MX 5 ASPMX3.GOOGLEMAIL.COM. @ 10800 IN MX 5 ASPMX2.GOOGLEMAIL.COM. @ 3600 IN TXT "v=spf1 include:_spf.google.com ~all" @ 10800 IN MX 3 ALT2.ASPMX.L.GOOGLE.COM. @ 10800 IN MX 3 ALT1.ASPMX.L.GOOGLE.COM. @ 10800 IN MX 1 ASPMX.L.GOOGLE.COM. google8a70835987f31e34 10800 IN CNAME google.com. I made that one up and included right in the middle to show how confused I am. What I'd like to know is the exact syntax and where/how I should put this TXT record.

  Read the article

• Default /server-status location not inheriting in Apache

  - by rmalayter

  I'm having a problem getting /server-status to work Apache 2.2.14 on Ubuntu Server 10.04.1. The default symlinks for status.load and status.conf are present in /etc/apache2/mods-enabled. The status.conf does include the location /server-status and appropriate allow/deny directives. However, the only vhost I have in sites-enabled looks like this. The idea is to proxy anything with a Tomcat URL to a cluster of tomcats, and anything else to an IIS box. However, this seems to result in requests to /server-status being sent to IIS. Copying the /server-status in explicitly to the Vhost configuration doesn't seem to help, no matter what order I use. Is it possible to include /server-status do this within a vhost configuration that has a "default" proxy rule?: <VirtualHost *:80> ServerAdmin webmaster@localhost DocumentRoot /var/www Header add Set-Cookie "ROUTEID=.%{BALANCER_WORKER_ROUTE}e; path=/" env=BALANCER_ROUTE_CHANGED <Proxy balancer://tomcatCluster> BalancerMember ajp://qa-app1:8009 route=1 BalancerMember ajp://qa-app2:8009 route=2 ProxySet stickysession=ROUTEID </Proxy> <ProxyMatch "^/(mytomcatappA|mytomcatappB)/(.*)" > ProxyPassMatch balancer://tomcatCluster/$1/$2 </ProxyMatch> #proxy anything that's not a tomcat URL to IIS on port 80 <Proxy /> ProxyPass http://qa-web1/ </Proxy>

  Read the article

• Mutual piping on linux

  - by user21919

  I would like the output of A to be input for B and at the same time the output of B to be the input for A, is that possible? I tried the naïve thing: creating named pipes for A (pipeA) and B (pipeB) and then: pipeB | A | pipeA & pipeA | B | pipeB & But that does not work (pipeB is empty and switching the order would not help either). Any help would be appreciated. Example: Command A could be compiled form of this C program: #include <stdio.h> int main() { printf("0\n"); int x = 0; while (scanf("%d", &x) != EOF) { printf("%d\n", x + 1); } return 0; } Command B could be compiled form of this C program: #include <stdio.h> int main() { int x = 0; while (scanf("%d", &x) != EOF) { printf("%d\n", x + x); } return 0; }

  Read the article

• Celery daemon as a Ubuntu service does not consume tasks while running from terminal does

  - by Guy

  On Ubuntu 11.10, I have to issue python tasks from django using celery. I'm currently testing on the same machine but eventually the celery worker should run on a remote machine. django uses the following settings: BROKER_HOST = "127.0.0.1" BROKER_PORT = 5672 BROKER_VHOST = "/my_vhost" BROKER_USER = "celery" BROKER_PASSWORD = "celery" I can also see my task queued in http://localhost:55672/#/queues the celery daemon uses the following configuration (celeryconfig.py): BROKER_HOST = "127.0.0.1" BROKER_PORT = 5672 BROKER_USER = "celery" BROKER_PASSWORD = "celery" BROKER_VHOST = "/my_vhost" CELERY_RESULT_BACKEND = "amqp" import os import sys sys.path.append(os.getcwd()) CELERY_IMPORTS = ("tasks", ) running celeryd -l info works well and now I want to run it as a service. I've followed the instructions from http://ask.github.com/celery/cookbook/daemonizing.html and now I'm trying to run it using: sudo /etc/init.d/celeryd start But the message is not being consumed, no error in the celery log either. /etc/default/celeryd CELERYD_NODES="w1" CELERYD_CHDIR="/path/to/django/project" CELERYD_OPTS="--time-limit=300 --concurrency=1" CELERY_CONFIG_MODULE="celeryconfig" # %n will be replaced with the nodename. CELERYD_LOG_FILE="/var/log/celery/%n.log" CELERYD_PID_FILE="/var/run/celery/%n.pid" # Workers should run as an unprivileged user. CELERYD_USER="celery" CELERYD_GROUP="celery" I've also created user celery in Ubuntu not sure if its necessary. Any help will be appreciated, Thanks, Guy

  Read the article

• High latency due to non-presence of a transit provider in my country

  - by nixnotwin

  My ISP, a state owned incumbent, buys bandwidth from different transit providers. Whenever it buys transits it announces only a specific prefix (in most cases a hitherto unused) through the new transit AS. For e.g. if it runs out of bandwidth, it buys bandwidth from a new transit and announces a new prefix through it, while the same prefix is not announced (or announced with lowest metrics, so that the routes are very rarely used) via the old transits which continue to provide bandwidth to it. I am a business customer, so I have a fiber based link to the ISP and a tiny subnet is given to me. The subnet which is provide to me is part of a prefix which is announced by the AS of a transit who, it seems, do not have a presence in my country. So when I do a trace the packets, when they leave my ISP's AS, they take about 275ms to reach the transit providers core router, which is located in USA (half the world away). Also for upstream traffic my ISP uses a transit provider (tier 1) who has a presence in my country. But the return path is always through the transit which is in USA. So, average latency is 400ms. All the users of other ISPs in my country discover my subnet via USA. Even the traffic from neighboring countries, from Europe (which is much nearer) follows the path via USA. Sites using CDNs also resolve to ips in USA. I have informed the ISP NOC about the issue and I have asked them to provide an ip subnet belonging to a prefix announced by a local transit (preferably a tier 1 transit provider) and I am waiting for a reply. My question: Is it a serious issue that I must follow up to get it resolved? When I compared the latency on other providers in my country, it is, in most cases, less than half of my ISPs latency. Why my ISP doesn't announce all its prefixes to all of its transit providers, so that the packets can take efficient and nearest routes to reach prefixes that originate within its network?

  Read the article

• nginx & php-fpm and custom header

  - by nixer

  I would like to pass some custom header (ACCESS_TOKEN) from client RESTful application (JS) to application server (php-fpm). I had read that nginx should pass all http headers to php, but somehow it does not come to my php :( I can see it in firebug http://o7.no/N6DM7q but can't see it in $_SERVER variable. it just does not exist in $_SERVER array. I'm thinking that i need to pass it manually. Now my config looks like that: location @php-fpm { include /etc/nginx/fastcgi_params; fastcgi_pass unix:/tmp/php5-fpm.sock; fastcgi_param REQUEST_URI /index.php$request_uri; fastcgi_param SCRIPT_FILENAME /htdocs/index.php; fastcgi_param PATH_INFO $fastcgi_script_name; fastcgi_param DOCUMENT_ROOT /htdocs; } } and when I add new line in location definition: location @php-fpm { include /etc/nginx/fastcgi_params; ... fastcgi_param ACCESS_TOKEN $http_access_token; } } or even if i will add it into fastcgi_params file it does not help :( if I put into location part next line: fastcgi_param ACCESS_TOKEN $http_access_token; then in php it has empty value :( how I can pass custom header from client to backend (php) via nginx ?

  Read the article

• Is there a limit setting a php_admin_value in php-fpm?

  - by PeeHaa

  I am trying to set a large value in the configuration of a pool in php-fpm, but at some point it just doesn't start anymore. php_admin_value[disable_functions] = dl,exec,passthru,shell_exec,system,proc_open,popen,curl_exec,curl_multi_exec,parse_ini_file,show_source,pcntl_exec,include,include_once,require,require_once,posix_mkfifo,posix_getlogin,posix_ttyname,getenv,get_current_use,proc_get_status,get_cfg_va,disk_free_space,disk_total_space,diskfreespace,getcwd,getlastmo,getmygid,getmyinode,getmypid,getmyuid,ini_set,mail,proc_nice,proc_terminate,proc_close,pfsockopen,fsockopen,apache_child_terminate,posix_kill,posix_mkfifo,posix_setpgid,posix_setsid,posix_setuid,fopen,tmpfile,bzopen,gzopen,chgrp,chmod,chown,copy,file_put_contents,lchgrp,lchown,link,mkdi,move_uploaded_file,rename,rmdi,symlink,tempnam,touch,unlink,iptcembed,ftp_get,ftp_nb_get,file_exists,file_get_contents,file,fileatime,filectime,filegroup,fileinode,filemtime,fileowne,fileperms,filesize,filetype,glob,is_di,is_executable,is_file,is_link,is_readable,is_uploaded_file,is_writable,is_writeable,linkinfo,lstat,parse_ini_file,pathinfo,readfile,readlink,realpath,stat,gzfile,create_function When trying to restart php-fpm it fails with the following message: Stopping php-fpm: [ OK ] Starting php-fpm: [20-Oct-2013 22:31:52] ERROR: [/etc/php-fpm.d/codepad.conf:235] value is NULL for a ZEND_INI_PARSER_ENTRY [20-Oct-2013 22:31:52] ERROR: Unable to include /etc/php-fpm.d/codepad.conf from /etc/php-fpm.conf at line 235 [20-Oct-2013 22:31:52] ERROR: failed to load configuration file '/etc/php-fpm.conf' [20-Oct-2013 22:31:52] ERROR: FPM initialization failed [FAILED] When I remove the last disabled function (create_function) it start again. I also tried with other functions, but this gives the same error so it's not related to the create_function function. The string currently is just over 1KB in size so it looks like I have hit a limit here? Is my assumption correct? Is there a way to overcome this limit? I also tried to add another php_admin_value[disable_functions] underneath it (hoping it would be appended), but that didn't work (it just used the first one).

  Read the article

• site to listen on port 88

  - by JohnMerlino

  I want to get one of my sites to listen on port 88. In ports.conf in /etc/apache2 on ubuntu server, I add so web app can listen on port 88: NameVirtualHost *:80 Listen 80 NameVirtualHost *:88 Listen 88 I have this in my etc/apache2/apache2.conf, I have this: # Include the virtual host configurations: Include sites-enabled/ Under sites enabled, I have a file looks like this: Listen *:88 NameVirtualHost *:88 <VirtualHost *:88> ServerName dogtracking.com DocumentRoot /home/doggps/public_html/eaglegps.com/current/public <Directory /home/doggps/public_html/eaglegps.com/current/public> AllowOverride all Options -MultiViews </Directory> <LocationMatch "^/assets/.*$"> Header unset ETag FileETag None # RFC says only cache for 1 year ExpiresActive On ExpiresDefault "access plus 1 year" </LocationMatch> </VirtualHost> Then I try to restart apache: /etc/init.d/apache2 restart And I get: * Restarting web server apache2 /usr/sbin/apache2ctl: line 87: ulimit: open files: cannot modify limit: Operation not permitted Warning: DocumentRoot [/home/xtreme/Sites/DogGPS-CMS] does not exist apache2: Could not reliably determine the server's fully qualified domain name, using 127.0.0.1 for ServerName [Thu Oct 18 18:04:21 2012] [warn] NameVirtualHost *:88 has no VirtualHosts /usr/sbin/apache2ctl: line 87: ulimit: open files: cannot modify limit: Operation not permitted Warning: DocumentRoot [/home/xtreme/Sites/DogGPS-CMS] does not exist apache2: Could not reliably determine the server's fully qualified domain name, using 127.0.0.1 for ServerName [Thu Oct 18 18:04:22 2012] [warn] NameVirtualHost *:88 has no VirtualHosts (13)Permission denied: make_sock: could not bind to address 0.0.0.0:80 no listening sockets available, shutting down Unable to open logs Action 'start' failed.

  Read the article

• Django apache + mod_wsgi with virtualenv

  - by ArgsKwargs

  I have some questions running multiple Django sites on a VPS I have a server that uses openPanel to automatically create VirtualHosts within apache2. My ideal situation is that I would have multiple virtualenvs with different dependencies installed so the python dist-packages directory isn't contaminated for different Django sites. For example: /home/user/virtualenv1 /home/user/virtualenv2 My django applications reside at /var/www, so For example: /var/www/djangosite1 /var/www/djangosite2 Now I've read upon openPanel docs and figured out the best thing todo is create a django.conf file inside the mydomain.com.inc folder, which looks something like: /etc/apache2/openpanel.d/mydomain.com.inc/django.conf DocumentRoot /var/www/djangosite1/project WSGIScriptAlias / /var/www/djangosite1/project/wsgi.py WSGIDaemonProcess mydomain python-path=/home/user/virtualenv1/lib/python2.6/site-packages <Directory /var/www/djangosite1/project> Order allow,deny Allow from all </Directory> Alias /static /var/www/djangosite1/project/static-root Now my problem is that this setup seems unable to find the virtualenv site-packages thus not recognizing any dependencies available in the given virtualenv Also, commenting out this line doesn't seem to break or change a thing: WSGIDaemonProcess mydomain python-path=/home/user/virtualenv1/lib/python2.6/site-packages For example: > service apache2 start ImportError: No module named South When I install South outside the virtualenv everything works

  Read the article

• Having munin server monitoring problem: Graphs not being generated.

  - by geerlingguy

  When I run munin-cron (munin-cron --debug), I get the following error: 2010/05/10 13:39:01 [WARNING] Call to accept timed out. Remaining workers: archstl.org;archstl.archstl.org 2010/05/10 13:39:01 [DEBUG] Active workers: 1/8 These errors simply keep repeating themselves until I quit munin-cron. I've followed the directions for debugging munin on the 'Debugging Munin plugins' wiki page, but I get the following results when going through their directions: After telnetting to localhost 4949, I can see a list of plugins, see a node at archstl.archstl.org, but can't fetch anything. The output is as follows: >fetch cpu . However, on the same machine (which is both the node and the master munin server), I can run munin-run cpu, and it prints the results correctly to the command line, like so: user.value 100829130 nice.value 3479880 system.value 13969362 idle.value 664312639 iowait.value 12180168 irq.value 14242 softirq.value 199526 steal.value 0 Looking at the wiki page mentioned above, it looks like it might be a plugin environment problem, but I can't figure out how to fix/change this... If the plugin does run with munin-run but not through telnet, you probably have a PATH problem. Tip: Set env.PATH for the plugin in the plugin's environment file.

  Read the article

• root folder php scripts not running in nginx

  - by Thermionix

  nginx with php-fpm on ubuntu 12.04 server. attempting to access /var/www/test.php (via https://example.net/test.php) downloads the script instead of executing it. if I place the test.php in a subdirectory, i.e. /var/www/test/test.php it executes. root.conf; root /var/www; include php-fpm.conf; location ~ /\. { access_log off; log_not_found off; deny all; } php-fpm.conf; location ~ \.php$ { try_files $uri =404; fastcgi_pass unix:/var/run/php5-fpm.socket; include fastcgi_params; } fastcgi_params; fastcgi_param QUERY_STRING $query_string; fastcgi_param REQUEST_METHOD $request_method; fastcgi_param CONTENT_TYPE $content_type; fastcgi_param CONTENT_LENGTH $content_length; fastcgi_index index.php; fastcgi_param HTTPS on; fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; #fastcgi_param SCRIPT_FILENAME $request_filename; fastcgi_param SCRIPT_NAME $fastcgi_script_name; fastcgi_param REQUEST_URI $request_uri; fastcgi_param DOCUMENT_URI $document_uri; fastcgi_param DOCUMENT_ROOT $document_root; fastcgi_param SERVER_PROTOCOL $server_protocol; fastcgi_param GATEWAY_INTERFACE CGI/1.1; fastcgi_param SERVER_SOFTWARE nginx/$nginx_version; fastcgi_param REMOTE_ADDR $remote_addr; fastcgi_param REMOTE_PORT $remote_port; fastcgi_param SERVER_ADDR $server_addr; fastcgi_param SERVER_PORT $server_port; fastcgi_param SERVER_NAME $server_name; # PHP only, required if PHP was built with --enable-force-cgi-redirect fastcgi_param REDIRECT_STATUS 200;

  Read the article

• Nginx + PHP-FPM Too Many Resources

  - by user3393046

  My Server has the following Specs CPU: 6 Cores Intel(R) Xeon(R) CPU E5-2650 v2 @ 2.60GHz RAM: 32 GB I have a problem with nginx+php-fpm. They are taking too many resources for an unknown reason. Even if i restart the nginx + php-fpm the start up processes will use many resources. My nginx Config is the following: user nginx; worker_processes auto; error_log /var/log/nginx/error.log warn; pid /var/run/nginx.pid; worker_rlimit_nofile 300000; events { worker_connections 6000; use epoll; } http { include /etc/nginx/mime.types; default_type application/octet-stream; log_format main '$remote_addr - $remote_user [$time_local] "$request" ' '$status $body_bytes_sent "$http_referer" ' '"$http_user_agent" "$http_x_forwarded_for"'; access_log /var/log/nginx/access.log main; sendfile on; #tcp_nopush on; keepalive_timeout 65; #gzip on; include /etc/nginx/conf.d/*.conf; } My php-fpm pool config is the following [www] user = nginx group = nginx listen = /var/run/php5-fpm.sock listen.owner = nginx listen.group = nginx listen.allowed_clients = 127.0.0.1 pm = ondemand pm.max_children = 1500; pm.process_idle_timeout = 5; chdir = / security.limit_extensions = .php I'm using on pm.ondemand since my website has to support many concurrent connections at the same time and i was unable to to it with dynamic/static. I guess this isnt the problem because as i said earlier when i restart nginx+php-fpm at the same time, they are taking too much resources without any request. Here is the screenshot with the CPU Usage http://s28.postimg.org/v54q25zod/Untitled.png

  Read the article

• Find slow network nodes between two data centers

  - by 2called-chaos

  I've got a problem with syncing big amount of data between two data centers. Both machines have got a gigabit connection and are not fully occupied but the fastest that I am able to get is something between 6 and 10 Mbit = not acceptable! Yesterday I made some traceroute which indicates huge load on a LEVEL3 router but the problem exists for weeks now and the high response time is gone (20ms instead of 300ms). How can I trace this to find the actual slow node? Thought about a traceroute with bigger packages but will this work? In addition this problem might not be related to one of our servers as there are much higher transmission rates to other servers or clients. Actually office = server is faster than server <= server! Any idea is appreciated ;) Update We actually use rsync over ssh to copy the files. As encryption tends to have more bottlenecks I tried a HTTP request but unfortunately it is just as slow. We have a SLA with one of the data centers. They said they already tried to change the routing because they say this is related to a cheap network where the traffic gets routed through. It is true that it will route through a "cheapnet" but only the other way around. Our direction goes through LEVEL3 and the other way goes through lambdanet (which they said is not a good network). If I got it right (I'm a network intermediate) they simulated a longer path to force routing through LEVEL3 and they announce LEVEL3 in the AS path. I basically want to know if they're right or they're just trying to abdicate their responsibility. The thing is that the problem exists in both directions (while different routes), so I think it is in the responsibility of our hoster. And honestly, I don't believe that there is a DC2DC connection which only can handle 600kb/s - 1,5 MB/s for weeks! The question is how to detect WHERE this bottleneck is

  Read the article

• configuring lighttpd for large downloads

  - by ahmedre

  i run a web site that hosts pages that are just general scripts (php, etc) and mp3 downloads (some of which are fairly large - up to 200mb). i am running lighttpd on the servers on linux (ubuntu 64). everything is fine, but under high load, the server is not accessible (or very slow - even sshing in takes a while), and i am guessing this is due to a huge number of mp3 downloads at that time. consequently, dns sees the server as down and redirects all the traffic to the other servers, and after a while, it comes back up and things work again. so what's the best way to fix this? ideally, i want the server to continue running (and the web pages - php etc - to always work, but downloads don't always have to work). should i just have 2 web servers running (one for the downloads and one for the php pages), or is it perhaps something i can fix in my lighttpd configuration? here are the snippets from my configuration: server.max-worker = 4 server.max-fds = 2048 server.max-keep-alive-requests = 4 server.max-keep-alive-idle = 4 server.stat-cache-engine = "fam" fastcgi.server = ( ".php" => (( "bin-path" => "/usr/bin/php-cgi", "socket" => "/tmp/php.socket", "max-procs" => 1, "idle-timeout" => 20, "bin-environment" => ( "PHP_FCGI_CHILDREN" => "64", "PHP_FCGI_MAX_REQUESTS" => "1000" ), "bin-copy-environment" => ( "PATH", "SHELL", "USER" ), "broken-scriptfilename" => "enable" )) ) # normal php site $HTTP["host"] =~ "bar.com" { server.document-root = "/usr/local/www/sites/bar.com/" accesslog.filename = "|/usr/sbin/cronolog /var/log/lighttpd/%m/%d/%H/bar.log" } # download site $HTTP["host"] =~ "(download|stream).foo.com" { server.document-root = "/home/audio/" dir-listing.activate = "enable" dir-listing.hide-dotfiles = "enable" evasive.max-conns-per-ip = 1 evasive.silent = "enable" # connection.kbytes-per-second = 256 accesslog.filename = "|/usr/sbin/cronolog /var/log/lighttpd/%m/%d/%H/download.log" }

  Read the article

• grep --color=auto with -i option disables the matching text color, why?

  - by emptyset

  I was messing around with grep and put this in my .zshenv: export GREP_OPTIONS="--color=auto" export GREP_COLORS='mt=1;34' I was bonking my head on the keyboard and changing GREP_COLORS around for a minute trying to figure out why the folder colors were working, but the matching text wasn't. I was doing this: $ grep -R -n -i -e "functionFoo\(" --include=*.cs --exclude-dir=Logs * The line number and file names were set with the default colors, but the matching text wasn't. After spending way too much time, I thought to do this: $ grep -R -n -e "functionFoo\(" --include=*.cs --exclude-dir=Logs * (I removed the -i option.) That's all it took to get the matching text to correctly show up in bold blue. This is a Cygwin on Vista setup, with rxvt running zsh. Any idea why grep colors would break on specifying a case-insensitive match? Update: Under cygwin 1.7, it's a little bit better - case insensitive search works correctly, but it only highlights the word that matches the expression exactly. In other words, "FunctionFoo" highlights "FunctionFoo" but not "functionFoo" and vice versa. Probably a grep issue so I'll be submitting it to that list.

  Read the article

• Trouble with nginx and serving from multiple directories under the same domain

  - by Phase

  I have nginx setup to serve from /usr/share/nginx/html, and it does this fine. I also want to add it to serve from /home/user/public_html/map on the same domain. So: my.domain.com would get you the files in /usr/share/nginx/html my.domain.com/map would get you the files in /home/user/public_html/map With the below configuration (/etc/nginx/nginx.conf) it appears to be going to my.domain.com/map/map as noticed by this: 2011/03/12 09:50:26 [error] 2626#0: *254 "/home/user/public_html/map/map/index.html" is forbidden (13: Permission denied), client: <edited ip address>, server: _, request: "GET /map/ HTTP/1.1", host: "<edited>" I've tried a few things but I'm still not able to get it to cooperate, so any help would be greatly appreciated. ####################################################################### # # This is the main Nginx configuration file. # ####################################################################### #---------------------------------------------------------------------- # Main Module - directives that cover basic functionality #---------------------------------------------------------------------- user nginx; worker_processes 1; error_log /var/log/nginx/error.log; pid /var/run/nginx.pid; #---------------------------------------------------------------------- # Events Module #---------------------------------------------------------------------- events { worker_connections 1024; } #---------------------------------------------------------------------- # HTTP Core Module #---------------------------------------------------------------------- http { include /etc/nginx/mime.types; default_type application/octet-stream; log_format main '$remote_addr - $remote_user [$time_local] "$request" ' '$status $body_bytes_sent "$http_referer" ' '"$http_user_agent" "$http_x_forwarded_for"'; access_log /var/log/nginx/access.log main; sendfile on; keepalive_timeout 65; server { listen 80; server_name _; #access_log logs/host.access.log main; location / { root /usr/share/nginx/html; index index.html index.htm; } location /map { root /home/user/public_html/map; index index.html index.htm; } error_page 404 /404.html; location = /404.html { root /usr/share/nginx/html; } error_page 500 502 503 504 /50x.html; location = /50x.html { root /usr/share/nginx/html; } } include /etc/nginx/conf.d/*.conf; }

  Read the article

< Previous Page | 369 370 371 372 373 374 375 376 377 378 379 380  | Next Page >