Search Results

Search found 18700 results on 748 pages for 'isolated network'.

Page 373/748 | < Previous Page | 369 370 371 372 373 374 375 376 377 378 379 380  | Next Page >

• Hints on diagnosing performance issue in OpenBSD firewall

  - by Tom

  My OpenBSD 4.6 pf firewall has started having really bad performance in the past few weeks. I've isolated the firewall (as opposed to the WAN connection, switch, cable, etc.) as the problem, but need a hint on how to further diagnose or fix the problem. The facts: Normal setup is: DSL Modem - FW Ext. NIC - FW Int. NIC - Switch - Laptop Normal setup described above gives only 25 Kbps! Plugging the laptop straight from the DSL modem gives a 1 MBps connection (full speed, as advertised). Therefore, the DSL connection seems to be OK. Plugging the laptop directly into the firewall's internal NIC (bypassing the switch) also gives only 25 Kbps. Therefore, the switch does not seem to be a problem. I've replaced the ethernet cables, but it didn't help. Here's the weird thing. Reloading the ruleset (/sbin/pfctl -Fa -f /etc/pf.conf) causes the laptop's connection to go up to 1 Mbps (i.e. full speed) for a few minutes before it gradually degrades back down to 25Kbps again. Any ideas on what's wrong or how I could further diagnose the problem?

  Read the article

• cannot connect to sql server express from sql server standard

  - by Jackson Sunuwar

  ... like my title says... I cannot connect to my instance on sql server express from sql server standard... I have tried disabling firing wall and checked sqlbrowser is started but for some reason I cannnot connect to my datbase... called server_name\sqlexpress.. I have a virtual machine and a full scale MS SQL Server 2008 R2 running on it... and I have several other vm running sqlexpress. they run fine and I can connect to them using sqlexpress... but when i try to access from sqlserver... I get this error. A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified) (Microsoft SQL Server, Error: -1) Digging deep into the error, I found this Error Number: -1 Severity: 20 State: 0 and finally this... Program Location: at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) at System.Data.SqlClient.TdsParser.Connect(ServerInfo serverInfo, SqlInternalConnectionTds connHandler, Boolean ignoreSniOpenTimeout, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecurity, SqlConnection owningObject) at System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, Boolean ignoreSniOpenTimeout, Int64 timerExpire, SqlConnection owningObject) at System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(String host, String newPassword, Boolean redirectedUserInstance, SqlConnection owningObject, SqlConnectionString connectionOptions, Int64 timerStart) at System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance) at System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance) at System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection) at System.Data.ProviderBase.DbConnectionFactory.CreateNonPooledConnection(DbConnection owningConnection, DbConnectionPoolGroup poolGroup) at System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection) at System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory) at System.Data.SqlClient.SqlConnection.Open() at Microsoft.SqlServer.Management.SqlStudio.Explorer.ObjectExplorerService.ValidateConnection(UIConnectionInfo ci, IServerType server) at Microsoft.SqlServer.Management.UI.ConnectionDlg.Connector.ConnectionThreadUser() Firewall is turned off on the VM that's running mssqlserver... I turned of firewall on one of the vm that's running the sqlexpress but I still get the error... can someone please help... thank you

  Read the article

• DHCP Server on local machine

  - by EralpB

  Hello I am trying to setup a dhcp3-server on Ubuntu. But my question is more generic, if dhcp server is in a blockbox and all clients are connected to it I think I get what is going on but when dhcp server is installed on one of the "clients" that confuses me. When I send a dhcp packet from that client to the dhcp server, will my ethernet card read and write at the same time? Or will it handle it internally without writing any data to ethernet cable. It's the first time I am encountering these network things so I am a little bit confused. Also I wonder If I am in a big network with lan IP let's say 192.168.0.100 and I install a dhcp server to my computer, can any other computers accidentally get IP from my dhcp server? Every computer has one ethernet card (if that matters?). And every computer is connected to one router. I guess the answer is no because the broadcast message won't reach to my computer since when router receives a dhcp search packet it will answer and it won't let other computers know about it because they don't need to. And without router sending that packet one by one, it cannot travel further. I'd be glad if someone enlightens me. Thank you very much.

  Read the article

• Is "DSLAM congestion" a legitimate reason for slow DSL?

  - by Jay Bazuzi

  My DSL has been extremely slow in the evenings recently. To test it, I telnet to my DSL Modem, and ping the gateway. This way I eliminate internet congestion and local network issues. In the mornings I get 30ms - 50ms pings. In the evenings, it bounces around a lot, but 10000ms pings are common. I complained to Qwest support, and they said it was a known issue on their end, their engineers were working on it, and wouldn't say anything else. A couple days later I complained again, and they sent out a technician. He tested my house wiring and found that one of them had a short. It was an unused line, so we disconnected it, and he said things looked better and left. My daytime speeds improved at this point, but evening is still bad. I complained to Qwest support again, and they said it was a problem with DSLAM congestion at their end, and that they were working on it, but no ETA. My neighbor has Qwest DSL and doesn't seem to have these problems. That seems strange. I go use her network when I absolutely must get online and mine is behaving badly. I can't tell if they're yanking my chain or not. Regardless, these speeds are crap. I'm paying for 7Mpbs but am lucky if I get 1/10th that in the evenings. My kids like to watch Netflix streaming movies, and it's just impossible after 5pm or so. Should I wait it out? Will complaining again produce any results? Should I change my subscription to a lower speed until they fix their end? Or switch to cable?

  Read the article

• I can't connect new Windows 7 PC to Mac iBook with OS 10.3.9

  - by Jeff Humm

  Help ! I have an old iBook wired to a router and a new PC linking wirelessly to same router. On the Mac I have 'seen' the PC but not been able to connect to it. On the PC, the Network and Sharing Centre lists 'IBOOK'. When I click on this, 'Windows Security' asks me to 'Enter Network Password', asking for User name and password. I have tried: 1) The user name and password of my admin account on the iBook. This returns a 'logon failure' message but lists the user name as [NAME_OF_PC\User Name], suggesting it was looking for the user name of the PC, not the Mac. 2) The user name and password of my account on the PC. This also returns a 'logon failure' message. 3) The user name of my account on the PC and the 'homegroup password' given to me by Windows when setting up the PC. This also returns a 'logon failure' message. Today I've tried connecting the two machines via a patch cable - still no joy. Can anyone help? It is 20 years since I wrestled with any OS other than Mac, and 10 years since I've done mich wrangling with the Macs, so please assume no knowledge! Thanks in advance,

  Read the article

• Windows 7 - Windows XP - sharing - why isn't working?

  - by durumdara

  Hi! This is seems to be "hardware" and not "software" / "programming" question, but I need to use this share in my programs, so it is "close to programming". We had an XP based wireless network. The server is XP Professional, the clients are XP Home (Notebooks). This was working well with folder sharing (with user rights, not simple share). Then we replaced the one of the notebook with Win7/X64 notebook. First time this can reach the server, and the another client too. Later I went to another sites, and connect to another servers, another networks. And then, when I return to this network, I saw that I cannot connect to this server. Nothing of resources I see, and when try to dbl click on this computer, I got login window, where I can write anything, never I can login... The interesting part, that: Another XP home can see the server, can login as quest, or with other user. The server can see the XP home notebook. The Win7 can see the notebook's shared folders, and XP home can see the Win7 shared folders. The server can see the Win7 folders, BUT: the Win7 cannot see the server folders. Cannot see the resources too... The Win7 is in "work networking group", the group name is not mshome. I tried everything on the server, I tried to remove MS client, restore it with simple sharing, set guest password, etc., but I lost the possibilities to access this server from Win7. Does anyone have any idea what I need to see, what I need to set to access these resource - to use them in my programs? Thanks for every info, link: dd

  Read the article

• How do I diagnose a bottleneck in an Intel Atom based Ubuntu server?

  - by Jon Cage

  I have a small media server at home which has software raid and a gigabit link to the rest of my network. For some reason though, I only get ~10MB/s transfers when copying to/from the server. I use software RAID5 (mdadm) over 4 1TB disks. On top of that I then use LVM to give me a huge pool of disk space which is then split up into multiple partitions which can be resized as and when they need it. I'm guessing this it most likely the cause, but I'd like to know for sure where the root cause is. So, how can I benchmark network throughput (Windows 7 desktop <- Ubuntu server) and hard disk performance to try and identify where my bottleneck might be? [Edit] If anyone's interested, the motherboard is an Intel Desktop Board D945GCLF2. So that's a 300 series Atom processor with the Intel® 945GC Express Chipset [Edit2] I feel like such a fool! I just checked my desktop and I had the slower of the two onboard NICs plugged in so the server is probably not at fault here. Transferring a copy of ubuntu off the server I get ~35-40MB/s according to Windows 7. I'll do those HD tests when I get a chance though (just for completeness).

  Read the article

• How do I apply multiple subnets to a server with one NIC?

  - by Cosban

  I am trying to route multiple IPs through one physical NIC on my dedicated server for use with Proxmox KVM VMs. I have a dedicated server which is currently running Debian 4.4.5-8 with 3 available ip addresses for use, which will be displayed as 176.xxx.xxx.196 (main), 176.xxx.xxx.198 (on same subnet as main) and 5.xxx.xxx.166 (different subnet). I am currently trying to route the third IP address with the dedi for use with a vps that I have set up using proxmox v2.x but am having a really, really hard time doing so. Virtual interfaces binding the additional IP addresses work as expected, ruling out external routing problems. The provider has given the following information for the IP addresses on the main subnet: gateway: 176.xxx.xxx.193 netmask: 255.255.255.224 broadcast: 176.xxx.xxx.223 As well as the following information for the IP address on the second subnet: gateway: 5.xxx.xxx.161 netmask: 255.255.255.248 broadcast: 5.xxx.xxx.167 Everything I've tried with /etc/network/interfaces has either not worked, or has rendered the network completely useless. This is the current state of the file, which has the secondary IP address working on the same subnet as well as IPv6 working, but not the second subnet. # Nativen IPv6 Schnittstelle iface eth0 inet6 manual # Bridge IPv4 Schnittstelle (176.xxx.xxx.193/27) auto vmbr0 iface vmbr0 inet static address 176.xxx.xxx.196 netmask 255.255.255.224 gateway 176.xxx.xxx.193 broadcast 176.xxx.xxx.223 bridge_ports eth0 bridge_stp off bridge_fd 0 bridge_maxwait 0 post-up ip addr add 176.xxx.xxx.198/27 dev vmbr0 auto vmbr1 iface vmbr1 inet static address 5.xxx.xxx.166 netmask 255.255.255.248 gateway 5.xxx.xxx.161 broadcast 5.xxx.xxx.167 bridge_ports eth0 bridge_stp off bridge_fd 0 bridge_maxwait 0 post-up ip addr add 5.xxx.xxx.166/27 dev vmbr1 # Bridge IPv6 Schnittstelle (Reichweite: xxxx:xxxx:xxxx:xxxx:xxxx:xxxx::/64) iface vmbr0 inet6 static address xxxx:xxxx:xxxx:xxxx:xxxx:xxxx netmask 64 up ip -6 route add xxxx:xxxx:xxxx:xxxx:xxxx:xxxx dev vmbr0 down ip -6 route del xxxx:xxxx:xxxx:xxxx:xxxx:xxxx dev vmbr0 up ip -6 route add default via xxxx:xxxx:xxxx:xxxx:xxxx:xxxx dev vmbr0 down ip -6 route del default via xxxx:xxxx:xxxx:xxxx:xxxx:xxxx dev vmbr0

  Read the article

• Connecting to server from remote machine

  - by Jannat Arora

  I wish to connect my machine to a server in some other city. For doing the same I am using the following command: mstsc -v ip_address_of_server remote desktop can't connect to remote computer for one of these reasons: 1) Remote access to server is not enabled. 2) Remote computer is turned off 3) Remote computer is not available on network. Make sure remote computer is turned on and connected to the network, and that remote access is enabled. As per previous posts I need to turn off my client computers firewall..which I have...but still it gives me the same message. Can someone please please help me out...so as to how i may resolve this?? I am really new to networking, etc. Also when i am pinging: ping ip_address_of server I am getting the following response: Reply from ip_address_of_server: destination host unreachable Also I did try on ubuntu with rdesktop...still its not been able to connect with it. Also i know there are other people who are able to connect their machines with the server remotely. So i guess its not working for me only. Also when I accessed the same machine through LAN I was able to do so.

  Read the article

• Elevating UAC via .bat file?

  - by jslaker

  Pretty straightforward one that I'm having trouble finding an answer to. serverfault previously helped me with finding a way to automate Windows updates without using WSUS. It's working fantastically, but to run it over the network, you have to first mount a shared drive. That's pretty simple XP since you just mount the drive and run the updater. On Vista and W7, though, this all has to be done with elevated privileges to work correctly. The UAC account can't see network drives mounted by the regular user, so in order to get everything working, I have to mount the share via net use from an escalated shell. I'd like to automate mounting this share and launching the updater via a simple .bat file. I could probably just instruct everybody to right click "Run as Administrator" on the .bat file, but I'd like to keep things as simple as possible and have the .bat automatically prompt the user to escalate their privileges. Since these computers don't belong to us, I can't count on anything like Powershell being installed, so that rules any solution along those lines out and pretty much have to rely on things that would be included in an RTM Vista install. I'm hoping I'm mostly missing something obvious here. :)

  Read the article

• Rapidly changing public IP addresses on certain networks?

  - by zenblender

  I run/develop an online game where many of our users are in southeast asia. I recently went to southeast asia and made an alarming discovery. Anywhere I got internet access, whether it was via 3G, a LAN in a hotel, or wifi in a cafe, both in Singapore and the Philippines, I noticed that my IP address was changing CONSTANTLY. I mean the public IP address, not the private one. I could load a page like whatismyip.com and just hit reload and see a new IP address show up every 5-10 seconds! This has lots of consequences for my online game, as many things "break" if the IP address changes for a given user. Basically, I would like to know more about this. Is there a name for the kind of network or router or paradigm that causes this, so I can read up on it? I don't understand WHY a network would function this way. Does it do this on purpose? Is it for security reasons? Is it to anonymize and protect the identity of the users? Or is it just an "old" method that is mostly obsolete in the rest of the world? Thanks for any info that will help me to understand.

  Read the article

• Adding 2008 Server to 2008 Domain

  - by Phillip

  Hello, I'm trying to create a lab for testing before I deploy solutions, I'm no experienced IT Administrator, and therefore I come here for help. I'm running 2 Virtual Servers on the same machine on a local connection between those two. They'are able to ping each other. Their names is TSDATA1 and TSDATA2 where TSDATA1 is the Domain Controller. I am able to ping between those two, on both "ping TSDATA1" and "ping 10.0.0.1" which is the IP address of TSDATA1. The IP address of TSDATA2 is 10.0.0.2. I'm trying to join the domain with TSDATA2 both I'm getting this error when trying: Note: This information is intended for a network administrator. If you are not your network's administrator, notify the administrator that you received this information, which has been recorded in the file C:\Windows\debug\dcdiag.txt. The following error occurred when DNS was queried for the service location (SRV) resource record used to locate an Active Directory Domain Controller for domain tsdata.local: The error was: "DNS name does not exist." (error code 0x0000232B RCODE_NAME_ERROR) The query was for the SRV record for _ldap._tcp.dc._msdcs.tsdata.local Common causes of this error include the following: The DNS SRV records required to locate a AD DC for the domain are not registered in DNS. These records are registered with a DNS server automatically when a AD DC is added to a domain. They are updated by the AD DC at set intervals. This computer is configured to use DNS servers with the following IP addresses: 10.0.0.1 One or more of the following zones do not include delegation to its child zone: tsdata.local local . (the root zone) For information about correcting this problem, click Help. I've figured out it has something to do with DNS lookup, but I have no clue what to do. Can anyone help?

  Read the article

• Windows 7 Multi-NIC woes

  - by Eric

  I have Comcast business Internet here. It gives me 5 static IPs. Most of the machines in my house connect to a router like every other household. It has a 192.168.117.x subnet, DHCP Server, etc. and all is well. However, I have a second machine on MY desk that has a life Internet IP. Up until yesterday, this machine was running XP Pro. The primary NIC was manually set to 192.168.117.241 with no gateway, and the secondary NIC was manually set to 173.x.x.171 with a gateway of 173.x.x.174. This worked just fine for years. Yesterday I replaced that XP machine with a brand new Windows 7 x64 box. Again, I configured it the same way. The onboard NIC was given a static 192.168.117.x address with no gateway, and the secondary NIC was given a live Internet IP address with the proper router, etc. 2 Problems. First is that the internal network (192.168.117.x) is listed as a public network because there's no gateway, so that means no homegroup, no file sharing, none of that. And I can't change it from what I'm reading... The second is that the machine reports the "router" ip address as it's address, and not the address that it's supposed to. I'm ready to tear my hair out over this. Any ideas?

  Read the article

• How can find the USB wireless adapter into the dmesg log file?

  - by AndreaNobili

  I am pretty new in Linux (RaspBian for RaspBerry Pi but I think that there are not difference) and I have to install an USB wireless network adapter (the product is the TP-Link TL-WN725N, this one: http://www.tp-link.it/products/details/?model=TL-WN725N ) Now, I think that this is not automatically recognized by my system because if I execute ifconfig command I obtain the following output: pi@raspberrypi ~ $ ifconfig eth0 Link encap:Ethernet HWaddr b8:27:eb:2a:9f:b0 inet addr:192.168.1.8 Bcast:192.168.1.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:475 errors:0 dropped:0 overruns:0 frame:0 TX packets:424 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:34195 (33.3 KiB) TX bytes:89578 (87.4 KiB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 UP LOOPBACK RUNNING MTU:65536 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) So now it see only my ethernet network interface and not the wireless. So I was thinkig to try to see into the dmesg, but I don't know what have I to see and how to select it into the dmesg output. For example by the following command I can see the line of the dmesg log file relate to my ethernet port: pi@raspberrypi ~ $ cat /var/log/dmesg |grep -i eth [ 3.177620] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-bcm2708_usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:2a:9f:b0 [ 18.030389] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup [ 19.642167] smsc95xx 1-1.1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 But what can I try to search for the USB wireless adapter? Tnx

  Read the article

• Cisco Catalyst 3750 connected to Cisco ASA 5505 and dropping packets

  - by Bo102010

  (Cross posted from Super User per suggestion there) At the office, I have inherited a network that I am still trying to fully comprehend. I have a problem today with a new connection between: A port on a Cisco Catalyst 3750 [WS-C3750G-48TS-S running C3750-IPSERVICESK9-M version 12.2(53)SE1] A port on a Cisco ASA 5505 [ASA Software version 8.3(2)] The 3750 is home to a Vlan that has a few ports assigned to it. interface Vlan3 description Internal network (172.18.160.0/24) ip address 172.18.160.1 255.255.255.0 I have a host (outside of my control) that needs to be in this VLAN (i.e it must have an address 172.18.160.something/24) that also needs to access the Internet. To accomplish this, I ran a link from the Catalyst (Gi1/0/13) to the ASA (Ethernet 0/5). I configured the Catalyst port like so: interface GigabitEthernet1/0/13 description To ASA, 172.18.160.69 switchport access vlan 3 switchport mode access speed 100 duplex full I configured the ASA like so: interface Vlan1 nameif inside security-level 100 ip address 172.18.160.69 255.255.255.0 interface Ethernet0/5 speed 100 duplex full Then I plugged the host into Ethernet 0/4 on the ASA and instructed its owner to make its default gateway 172.18.160.69. I made a NAT rule in the ASA and set up some rules, and it's able to access the Internet without issue. However, I noticed that the Catalyst reports a ton of packets being dropped toward the ASA. Catalyst3750#show interfaces GigabitEthernet 1/0/13 | include counters|drops Last clearing of "show interface" counters 00:28:13 Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 136909347 This is a huge number of drops, since there's not much traffic on this VLAN at all. I tried these things: Make sure speed and duplex agree on both sides (100 Mbps / Full) Set no cdp enable on the Catalyst Gi10/13 Set no keepalive on the Catalyst Gi10/13 Checked for excessive CPU usage on both Checked for excessive traffic on both Am I missing something? Any help would be appreciated.

  Read the article

• Replacing local home server with VPS: Suggestions?

  - by CamronBute

  So right now, I'm running an old box with a 2TB HDD in it. I use this as a file server for the home network, as well as a box for downloading large files which are synced via Dropbox. Lots of other tinkering things, too. Basically, I'm sick of paying extra for the power and having to worry about drive failures and whatnot. I'd rather get a remote server, let someone else manage it and provide access from the Internet. So, I've been looking for a Windows VPS that would give me access to install things and tinker, and I'm having a problem finding a host that offers more than 100GB of hard drive space. If they do offer a package with 100GB of storage, everything else is waaayyyy more than what I actually need. The idea is to create a permanent VPN connection from the cloud server to my home network to provide a transparent solution so I'm not having to go to lengths to transfer files or whatnot. I think a VPS solution will allow me to do this. I would like 1TB of storage space, minimum 100Mbps Internet connection, minimum 250GB bandwidth, admin access. Anyone have anything? Or am I being unreasonable? If I am, why?

  Read the article

• How can I use two Internet connections in Ubuntu?

  - by Martin

  My goal is to be able to do something like this: curl google.com --interface ppp0 curl google.com --interface p2p2 ppp0 is a DSL connection, and p2p2 is a separate direct Internet connection. Currently I can only get one of these to work at a time. When I enable one, the other one stops working. /etc/network/interfaces: # The loopback network interface auto lo iface lo inet loopback # DSL auto p2p1 iface p2p1 inet manual auto dsl-provider iface dsl-provider inet ppp pre-up /sbin/ifconfig p2p1 up # line maintained by pppoeconf provider dsl-provider # DIRECT auto p2p2 iface p2p2 inet dhcp ifconfig: lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:65536 Metric:1 p2p1 Link encap:Ethernet inet6 addr: fe80::20a:ebff:fe21:99c6/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 p2p2 Link encap:Ethernet inet addr:192.168.1.101 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::20a:ebff:fe17:1249/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 ppp0 Link encap:Point-to-Point Protocol inet addr:53.193.231.167 P-t-P:53.193.224.1 Mask:255.255.255.255 UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1492 Metric:1 route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 0.0.0.0 0.0.0.0 0.0.0.0 U 0 0 0 ppp0 10.0.10.0 0.0.0.0 255.255.255.0 U 0 0 0 eth2 53.193.224.1 0.0.0.0 255.255.255.255 UH 0 0 0 ppp0 192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 p2p2 By default, only ppp0 works. If I run "route add default gw 192.168.1.1 p2p2" then I can use p2p2 but ppp0 stops working. If I then run "route add default gw 53.193.224.1 ppp0" then I can use ppp0 again but p2p2 stops working. What can I do to be able to use both interfaces selectively?

  Read the article

• New AD-DC in a new Site is refusing cross-site IPv4 connections

  - by sysadmin1138

  We just added a new Server 2008 (sp2) Domain Controller in a new Site, our first such config. It's over a VPN gateway WAN (10Mbit). Unfortunately it is displaying a strange network symptom. Connections to the SMB ports (TCP/139 and TCP/445) are being actively refused... if the connection is coming in on pure IPv4. If the incoming connection is coming by way of the 6to4 tunnel those connections establish and work just fine. It isn't the Firewall, since this behavior can be replicated with the firewall turned off. Also, it's actually issuing RST packets to connection attempts; something that only happens with a Windows Firewall if there is a service behind a port and the service itself denies access. I doubt it's some firewall device on the wire, since the server this one replaced was running Samba and access to it from our main network functioned just fine. I'm thinking it might have something to do with the Subnet lists in AD Sites & Services, but I'm not sure. We haven't put any IPv6 addresses in there, just v4, and it's the v4 connections that are being denied. Unfortunately, I can't figure this out. We need to be able to talk to this DC from the main campus. Is there some kind of site-based SMB-level filtering going on? I can talk to the DC's on campus just fine, but that's over that v6 tunnel. I don't have access to a regular machine on that remote subnet, which limits my ability to test.

  Read the article

• How to prevent getting infected by rogue security applications

  - by Ieyasu Sawada

  My computer never got infected with a virus before, because I'm using Web of Trust browser plugin, sandboxie and Avast Free antivirus. But today, it got infected with a rogue security application called antivirus.net. I have already removed it using MBAM, SAS, and Kaspersky Virus Removal Tool. And by the way, I was using MSE when my laptop got infected. Seems like the rogue application just killed off the MSE process. And I never even got a warning. I was using the wi-fi from our school, which I think is the cause since most of the computers in our laboratory has rogue applications on it. My question is, how do I prevent this from happening again? It took me about 6 hours to disinfect my computer and I don't want it to happen again. Please enlighten me if these rogue applications really just pop out of nowhere. Note I'm not dumb enough to agree with installing rogue security applications. It just came out of nowhere. I'm happy with MSE, well not after it let antivirus.net penetrate my computer. I've done a little bit of research and it says that it needs the permission of the user to actually install it in the computer: http://www.net-security.org/malware_news.php?id=1245 http://en.wikipedia.org/wiki/Rogue_security_software Is it possible that other computers in our school network have agreed to install those? Or maybe the network admin?

  Read the article

• eee box "drobpox" server 24/7

  - by microspino

  I'd like to create a mini dropbox and print server on a small soho network of 5 users (all of them use windows XP desktops). The device need to run 24/7 or at least 12/7 (I can accept just workday hours too but the other two options would be better). Dropbox mini server: I mean I will have a 90gb dropbox on every computer on my network LAN syncing with It and the one onto It syncing to the web. Print Server: I have a Samsung A4 small laser printer, a HP500 Designjet Plotter, a Samsung Multifunction Machine (fax/print/scan/copy), a modern HP color A3 Deskjet printer and a HP laserjet A4 color printer. All of them need to be connected to this mini server. Fax/Scan server: since I have the above mentioned fax/print/scan/copy machine I would like to make people use It from/to their computers through the mini server. I thought to a recent EEEBOX machine because I heard good things about ATOM cpus and because It seems that a recent BIOS version could switch It off and on autonomously. I'd like to listen some advice from You. Best of all would be: - If You have something similar running for a long time - If You disagree with this hardware choice and If You would suggest some other device. - If You see any issues with my printing setup - Anything else ;) My budget is from Zero (using right sw to build something on top on a old PC) to 500€ max.

  Read the article

• How do I prevent or override a group policy on Windows 7?

  - by Kevin

  A few months ago my company was purchased by a large corporation. We recently switched our network over to the large corporate network which has more restrictions requirements. One of these is the requirement to use a proxy server for Internet traffic. However, some of our internal servers are not recognized by the corporate DNS, so we need to provide the fully qualified domain name. For W7, we make changes to the Internet Properties for IE8 and Chrome to include our domain name as an exception to the proxy server (e.g., *.foobar.com). The problem is that a group policy that does not include our domain name is continually pushed out to my systems throughout the day. This requires me to make the appropriate changes to the Internet Properties several times a day in order to access our internal servers. Is there a way that I can prevent the group policy from being pushed to my systems or detect when the group policy is pushed and override it? I am an administrator on all of my systems. I do have Firefox installed which is not subject to the same group policy push, but I need to have IE8 and Chrome working.

  Read the article

• Resource Monitor (resmon) in Windows Server 2008 R2

  - by Clever Human

  In Windows Server 2008 R2's Resource Monitor, is there a way to set the scale of the various graphs to be constant values instead of variable based on data? It seems to me that the utility of a graph is to get a quick overview glance at the values those graphs are showing. So if I look at the CPU graph and the line is up near the top, I can know immediately that something is using all my CPU and go investigate what. I don't really care if the CPU is jumping between .01% and 2%. Or if the network usage monitor is up near the top, I will know that all my bandwidth is being used up, and go figure out what. But the way things are now, the graphs are meaningless because the scales constantly shift. If you look at the network usage graph in one second it might have a scale out of 100kbps, and the next second have a scale based on 1mbps! So... is there a registry key or something that will peg the scale of these graphs to logical maximums? (the graph on the right hand side of the screenshot below):

  Read the article

• Inter-VLAN Malicious Code Scanning

  - by Jackthedog

  I am trying to find an inbuilt solution on a Cisco Catayst 3750X Switch to scan all traffic routed from one VLAN to another for malicious code. The situation is that we currently have a development environment which is currently being redesigned to upgrade the network infrastructure to use the 3750X switches to manage server and workstation connectivity as well as inter-VLAN routing. We also have another system that is responsible for taking the builds created on the development environment and imaging various HDDs. Because these are two separate systems, we have a requirement in the workplace to anti-virus scan any data transferred between these systems. This is done by copying the data from the originating system to external USB HDD, scanning in a standalone workstation and then copying the data on to the receiving system. As you can imagine this is extremely tedious and impractical most of the time... (I don't make the rules). Anyway, with this redesign going on, we would like to join the imaging system to the network infrastructure of the development system, keeping separation by the use of VLANs and restricting traffic by using ACLs. As we still have the requirement to scan all traffic I would like to configure some sort of malicious code scanning when ever traffic is routed between these VLANs. I am aware I could install a separate in-line IPS/IDS device, however both systems will be using multiple ports on the switch (obviously), and we won't be able to put a device on each port. I would would prefer not to add additional hardware if the 3750x switch is capable of doing the job. Is anyone aware of any Cisco solution that I could use here, that ideally can be incorporated into the 3750x switch? Thanks in advance.

  Read the article

• Cisco Multi-DMZ firewall

  - by BParker

  I need to find a firewall that will give me 1 LAN port, and 5-7 DMZ ports. I have a requirement to replace some FreeBSD systems that are used to run some testing equipment. It is essential that the DMZ ports cannot communicate with each other, but the LAN port can communicate with everyone. That way a user on the LAN can connect to the test systems, but the test systems are isolated entirely and cannot interfere with each other. One of the DMZ's will be connected to a VMWare ESXi server, one to a standard server, and the rest to various types of equipment. The lan port will be connected to the corporate LAN switch. Sorry if i am a little vague, I am just trying to work all this out myself! Currently we have a FreeBSD configured, but the quad port NIC's are pretty expensive, and the PC itself is old, so i would prefer to replace it with a dedicate piece of kit which can do the same job, but more reliably! These test rigs are used all over the place, and get moved quite often, so i am aiming for Cisco kit for ease of configuration and reliability of the hardware itself. Thanks

  Read the article

• Split Tunnel VPN using incorrect Tunnel

  - by Brian Schmeltz

  Our company has a handful of field offices that have recently been setup with a regular internet connection after we removed the T1 and router that connected them directly to our network. Now, when the users are in the office, they log in to the VPN to be able to connect to the network. For the sake of them being able to print and scan from the local multi-function we have setup a split tunnel VPN. We currently have about 15-20 users using this setup around the country without any problems. Recently one of our users started having problems accessing internal programs/sites when connecting from both home and the office. There are three other users in the same office and they do not have this problem. I assumed that it was something with the computer and went ahead and replaced it with another of the same model. The computer worked fine in our home office; however, when the user received it, she had the exact same problem both at home and in the field office. Thinking it may be a NIC driver issue I sent her another computer, this time a different model, same problem occurred. If I update the host file to point to the correct paths, things will work, and if I connect via a normal VPN connection everything works, but the user cannot scan or print - which is a problem. Have tried to find ways to create another tunnel on a normal VPN and have tried to find ways to force the correct tunnel on the split tunnel VPN. It appears that there is something related to the ISP because if I connect to Comcast or Verizon it is fine but once she connects to Insite then she has problems. I have been unable to get any support from Insite as they don't feel the issue is with them. We use a Nortel VPN client. Any thoughts or ideas would be appreciated.

  Read the article

< Previous Page | 369 370 371 372 373 374 375 376 377 378 379 380  | Next Page >