Search Results

Search found 10572 results on 423 pages for 'learning plan'.

Page 373/423 | < Previous Page | 369 370 371 372 373 374 375 376 377 378 379 380  | Next Page >

• Convert a image to a monochrome byte array

  - by Scott Chamberlain

  I am writing a library to interface C# with the EPL2 printer language. One feature I would like to try to implement is printing images, the specification doc says p1 = Width of graphic Width of graphic in bytes. Eight (8) dots = one (1) byte of data. p2 = Length of graphic Length of graphic in dots (or print lines) Data = Raw binary data without graphic file formatting. Data must be in bytes. Multiply the width in bytes (p1) by the number of print lines (p2) for the total amount of graphic data. The printer automatically calculates the exact size of the data block based upon this formula. I plan on my source image being a 1 bit per pixel bmp file, already scaled to size. I just don't know how to get it from that format in to a byte[] for me to send off to the printer. I tried ImageConverter.ConvertTo(Object, Type) it succeeds but the array it outputs is not the correct size and the documentation is very lacking on how the output is formatted. My current test code. Bitmap i = (Bitmap)Bitmap.FromFile("test.bmp"); ImageConverter ic = new ImageConverter(); byte[] b = (byte[])ic.ConvertTo(i, typeof(byte[])); Any help is greatly appreciated even if it is in a totally different direction.

  Read the article

• How might a C# programmer approach writing a solution in javascript?

  - by Ben McCormack

  UPDATE: Perhaps this wasn't clear from my original post, but I'm mainly interested in knowing a best practice for how to structure javascript code while building a solution, not simply learning how to use APIs (though that is certainly important). I need to add functionality to a web site and our team has decided to approach the solution using a web service that receives a call from a JSON-formatted AJAX request from within the web site. The web service has been created and works great. Now I have been tasked with writing the javascript/html side of the solution. If I were solving this problem in C#, I would create separate classes for formatting the request, handling the AJAX request/response, parsing the response, and finally inserting the response somehow into the DOM. I would build properties and methods appropriately into each class, doing my best to separate functionality and structure where appropriate. However, I have to solve this problem in javascript. Firstly, how could I approach my solution in javascript in the way I would approach it from C# as described above? Or more importantly, what's a better way to approach structuring code in javascript? Any advice or links to helpful material on the web would be greatly appreciated. NOTE: Though perhaps not immediately relevant to this question, it may be worth noting that we will be using jQuery in our solution.

  Read the article

• Large scale Merge Replication strategy - what can go wrong?

  - by niidto

  Hi, I'm developing a piece of software that uses Merge Replication and SQL Compact on Windows Mobile 6. At the moment it is running on 5 devices reasonably well. The issues I've come up against are as follows: The schema has had to change a lot, and will continue to have to change as the application evolves. There have been various errors replicating these schema changes down to the device, uploads failing due to schema inconsistencies. Subscriptions expiring (after 14 days) and unable to reinitialize with upload - AKA, potential data los of unsynced data up to that point. Basically, the worst case scenario is data loss, and when merge replication fails, there seems to be no way back to get the data off. My method until now has been to drop and create the subscription on the device. I don't hear many people doing this, though it seems to solve everything. The long term plan is to role this out to 500+ devices. Any advice on people who have undertaken similar projects, and how to minimise data loss and make it so that there's appropriate error handling code to recover from sync failures would be much appreciated. James

  Read the article

• Should frontend and backend be handled by different controllers?

  - by DR

  In my previous learning projects I always used a single controller, but now I wonder if that is good practice or even always possible. In all RESTful Rails tutorials the controllers have a show, an edit and an index view. If an authorized user is logged on, the edit view becomes available and the index view shows additional data manipulation controls, like a delete button or a link to the edit view. Now I have a Rails application which falls exactly into this pattern, but the index view is not reusable: The normal user sees a flashy index page with lots of pictures, complex layout, no Javascript requirement, ... The Admin user index has a completly different minimalistic design, jQuery table and lots of additional data, ... Now I'm not sure how to handle this case. I can think of the following: Single controller, single view: The view is split into two large blocks/partials using an if statement. Single controller, two views: index and index_admin. Two different controllers: BookController and BookAdminController None of these solutions seems perfect, but for now I'm inclined to use the 3rd option. What's the preferred way to do this?

  Read the article

• Why would an image (the Mandelbrot) be skewed and wrap around?

  - by Sean D

  So I just wrote a little snippet to generate the Mandelbrot fractal and imagine my surprise when it came out all ugly and skewed (as you can see at the bottom). I'd appreciate a point in the direction of why this would even happen. It's a learning experience and I'm not looking for anyone to do it for me, but I'm kinda at a dead end debugging it. The offending generation code is: module Mandelbrot where import Complex import Image main = writeFile "mb.ppm" $ imageMB 1000 mandelbrotPixel x y = mb (x:+y) (0:+0) 0 mb c x iter | magnitude x > 2 = iter | iter >= 255 = 255 | otherwise = mb c (c+q^2) (iter+1) where q = x --Mandelbrot --q = (abs.realPart $ x) :+ (abs.imagPart $ x) --Burning Ship argandPlane x0 x1 y0 y1 width height = [(x,y)| y<-[y1,(y1-dy)..y0], --traverse from x<-[x0,(x0+dx)..x1]] --top-left to bottom-right where dx = (x1 - x0)/width dy = (y1 - y0)/height drawPicture :: (a->b->c)->(c->Colour)->[(a,b)]->Image drawPicture function colourFunction plane = map (colourFunction.uncurry function) plane imageMB s = createPPM s s $ drawPicture mandelbrotPixel (\x->[x,x,x]) $ argandPlane (-1.8) (-1.7) (0.02) 0.055 s' s' where s' = fromIntegral s And the image code (which I'm fairly confident in) is: module Image where type Colour = [Int] type Image = [Colour] createPPM :: Int -> Int -> Image -> String createPPM w h i = concat ["P3 ", show w, " ", show h, " 255\n", unlines.map (unwords.map show) $ i]

  Read the article

• JSF h:outputStylesheet doesn't work everywhere

  - by s3rius

  I'm currently learning Icefaces, now I'm trying to integrate a css file via h:OutputStylesheet into my code. I have a main page and a second page. Using outputStylesheet in my main page works well (and then I can also access the css in the second page, which I guess is intended). But when I try to integrate it in my second page it doesn't work at all. The code for both pages is basically identical. main page: <h:head></h:head> <h:body> <!-- this line works --> <h:outputStylesheet library="css" name="style.css" /> <!-- this line is only shown in red if the outputStylesheet from above is there --> <div class="red">This is red color in main page</div> </h:body> second page: <h:head></h:head> <h:body> <!-- this line doesn't work --> <h:outputStylesheet library="css" name="style.css" /> <!-- this line is only shown in red if the outputStylesheet in main page is there --> <div class="red">This is red color in second page</div> </h:body> I've made sure that I have h:body and h:head tags in both files. There's nothing more in the html pages except the standard doctype and xml version declarations. I've tried packing everything into h:forms, but that doesn't change anything. Can anyone explain to me what's going on?

  Read the article

• HashMap Memory Leak because of Dynamic Array

  - by Jake M

  I am attempting to create my own HashMap to understand how they work. I am using an array of Linked Lists to store the values(strings) in my hashmap. I am creating the array like this: Node** list; Instead of this: Node* list[nSize]; This is so the array can be any size at runtime. But I think I am getting a memory leak because of how I am doing this. I dont know where the error is but when I run the following simple code the .exe crashes. Why is my application crashing and how can I fix it? Note: I am aware that using a vector would be much better than an array but this is just for learning and I want to challenge myself to create the hashmap using a 'Dynamic' Array. PS: is that the correct term(Dynamic Array) for the kind of array I am using? struct Node { // to implement }; class HashMap { public: HashMap(int dynSize) { *list = new Node[dynSize]; size = dynSize; for (int i=0; i<size; i++) list[i] = NULL; cout << "END\n"; } ~HashMap() { for (int i=0; i<size; i++) delete list[i]; } private: Node** list; // I could use a vector here but I am experimenting with a pointer to an array(pointer), also its more elegant int size; }; int main() { // When I run this application it crashes. Where is my memory leak? HashMap h(5); system("PAUSE"); return 0; }

  Read the article

• What are salesforce.com and Apex like as an application development platform?

  - by mhollers

  I have recently discovered that salesforce.com is much more than an online CRM after coming across a Morrison's Case Study in which they develop a works management application. I've been trying it out with a view to recreating our own Works Management system on the platform. My background is in Microsoft and .Net, and the obvious 1st choice would be asp.net. However, there's only really myself with .net experience and my manager with a more legacy Synergy programming background, and I am self taught and am looking at evaluating other RAD options (eg Ironspeed). the nature of the business is in the main 2-5 concurrent construction type contracts that run for 3-5 yrs each, each requiring 15-50 system users. Traditionally we have used our character based Works Mangement system for everything and tweaked it for each contract. The Salesforce licensing model on the face of it suits this sort of flexibilty, but I'm worried about the development flexibilty/learning curve and all the issues that surround lock-in. There doesn't seem to be much neutral sober analysis of the platform on the web that isn't salesforce's own material/blogs Has anyone any experience of developing an application on salesforce as compared to the more 'traditional' .Net route?

  Read the article

• How can several different datatypes be saved in one table

  - by poseidon

  This is my situation: I am constructing an ad-like application in Django and Mysql. I am using a flexible-ad approach where we have: a table with ad categories (several categories such as home, furniture, cars, etc.) id_category name a table with details for the ad categories (home: area, squared meters. car: seats, color.) id_detail id_category (the categ the detail describes) name type (boolean, char, int, long, etc.) the ad table (i am selling a house. i am selling a car.) id_ad id_category text date a table where i plan to consolidate the details of the ads (home: A-area, 500 sq-meters. car: 5 seats, red.) id_detail_ad id_ad id_detail value Is this possible? Can I have a table of details for all the ads, even if details include numbers, texts, booleans, etc? Or would I have to save them all as text and then interpret them via code accordingly? Please express your opinions. Thank you.

  Read the article

• Is there a way to detect Layout or Display changes in WPF?

  Hello! I am trying to check how fast the Frame control can display a FixedPage object when it is assigned to Frame.Content property. I plan to check the tick count before and after the assignment to the Content property. Example: int starttime = Environment.TickCount; frame1.Content = fixedpage; int endtime = Environment.TickCount; The problem is that the assignment to the Content property might be asynchronous and returns immediately therefore i get a zero amount of time. The rendering of the FixedPage however visually has a lag time from assignment of the Content property up to the point where the FixedPage appears on screen. The Frame.ContentChanged() event is no good either because it gets triggered even before the FixedPage appears on screen so it's not accurate. I'm thinking of detecting the change on the window or control's display instead in order to get the time when the FixedPage is actually displayed on screen. Is there a way to do this in WPF? Thanks!

  Read the article

• objective-c having issues with an NSDictioary object

  - by Mark

  I have a simple iPhone app that Im learning and I want to have an instance variable called urlLists which is an NSDictionary I have declared it like so: @interface MyViewController : UIViewController <UIPickerViewDataSource, UIPickerViewDelegate>{ IBOutlet UIPickerView *pickerView; NSMutableArray *categories; NSDictionary *urlLists; } @property(retain) NSDictionary *urlLists; @end and in the implementation: @implementation MyViewController @synthesize urlLists; ... - (void)viewDidLoad { [super viewDidLoad]; categories = [[NSMutableArray alloc] init]; [categories addObject:@"Sport"]; [categories addObject:@"Entertainment"]; [categories addObject:@"Technology"]; [categories addObject:@"Political"]; NSArray *objects = [NSArray arrayWithObjects:@"value1", @"value2", @"value3", @"value4", nil]; urlLists = [NSDictionary dictionaryWithObjects:objects forKeys:categories]; for (id key in urlLists) { NSLog(@"key: %@, value: %@", key, [urlLists objectForKey:key]); } } ... @end And, this all works up to here. I have added a UIPicker to my app, and when I select one of the items, I want to Log the one picked and its related entry in my dictionary. -(void) pickerView:(UIPickerView *)thePickerView didSelectRow:(NSInteger)row inComponent:(NSInteger) component { for (id key in self.urlLists) { NSLog(@"key: %@, value: %@", key, [urlLists objectForKey:key]); } } but I get the old EXC_BAD_ACCESS error... I know Im missing something small, but what? Thanks

  Read the article

• How do I capture keystrokes on the web?

  - by Sean

  Using PHP, JS, or HTML (or something similar) how would I capture keystokes? Such as if the user presses ctrl+f or maybe even just f, a certain function will happen. ++++++++++++++++++++++++EDIT+++++++++++++++++++ Ok, so is this correct, because I can't get it to work. And I apologize for my n00bness is this is an easy question, new to jQuery and still learning more and more about JS. <script> var element = document.getElementById('capture'); element.onkeypress = function(e) { var ev = e || event; if(ev.keyCode == 70) { alert("hello"); } } </script> <div id="capture"> Hello, Testing 123 </div> ++++++++++++++++EDIT++++++++++++++++++ Here is everything, but I can't get it to work: <link rel="icon" href="favicon.ico" type="image/x-icon"> <style> * { margin: 0px } div { height: 250px; width: 630px; overflow: hidden; vertical-align: top; position: relative; background-color: #999; } iframe { position: absolute; left: -50px; top: -130px; } </style> <script> document.getElementsByTagName('body')[0].onkeyup = function(e) { var ev = e || event; if(ev.keyCode == 70 && ev.ctrlKey) { //control+f alert("hello"); } } </script> <div id="capture"> Hello, Testing 123<!--<iframe src="http://www.pandora.com/" scrolling="no" width="1000" height="515"frameborder="0"></iframe>--> </div>

  Read the article

• Thread mutex behaviour

  - by Alberteddu

  Hi there, I'm learning C. I'm writing an application with multiple threads; I know that when a variable is shared between two or more threads, it is better to lock/unlock using a mutex to avoid deadlock and inconsistency of variables. This is very clear when I want to change or view one variable. int i = 0; /** Global */ static pthread_mutex_t mutex = PTHREAD_MUTEX_INITIALIZER; /** Thread 1. */ pthread_mutex_lock(&mutex); i++; pthread_mutex_unlock(&mutex); /** Thread 2. */ pthread_mutex_lock(&mutex); i++; pthread_mutex_unlock(&mutex); This is correct, I think. The variable i, at the end of the executions, contains the integer 2. Anyway, there are some situations in which I don't know exactly where to put the two function calls. For example, suppose you have a function obtain(), which returns a global variable. I need to call that function from within the two threads. I have also two other threads that call the function set(), defined with a few arguments; this function will set the same global variable. The two functions are necessary when you need to do something before getting/setting the var. /** (0) */ /** Thread 1, or 2, or 3... */ if(obtain() == something) { if(obtain() == somethingElse) { // Do this, sometimes obtain() and sometimes set(random number) (1) } else { // Do that, just obtain(). (2) } } else { // Do this and do that (3) // If # of thread * 3 > 10, then set(3*10) For example. (4) } /** (5) */ Where I have to lock, and where I have to unlock? The situation can be, I think, even more complex. I will appreciate an exhaustive answer. Thank you in advance. —Alberto

  Read the article

• How to use a TFileStream to read 2D matrices into dynamic array?

  - by Robert Frank

  I need to read a large (2000x2000) matrix of binary data from a file into a dynamic array with Delphi 2010. I don't know the dimensions until run-time. I've never read raw data like this, and don't know IEEE so I'm posting this to see if I'm on track. I plan to use a TFileStream to read one row at a time. I need to be able to read as many of these formats as possible: 16-bit two's complement binary integer 32-bit two's complement binary integer 64-bit two's complement binary integer IEEE single precision floating-point For 32-bit two's complement, I'm thinking something like the code below. Changing to Int64 and Int16 should be straight forward. How can I read the IEEE? Am I on the right track? Any suggestions on this code, or how to elegantly extend it for all 4 data types above? Since my post-processing will be the same after reading this data, I guess I'll have to copy the matrix into a common format when done. I have no problem just having four procedures (one for each data type) like the one below, but perhaps there's an elegant way to use RTTI or buffers and then move()'s so that the same code works for all 4 datatypes? Thanks! type TRowData = array of Int32; procedure ReadMatrix; var Matrix: array of TRowData; NumberOfRows: Cardinal; NumberOfCols: Cardinal; CurRow: Integer; begin NumberOfRows := 20; // not known until run time NumberOfCols := 100; // not known until run time SetLength(Matrix, NumberOfRows); for CurRow := 0 to NumberOfRows do begin SetLength(Matrix[CurRow], NumberOfCols); FileStream.ReadBuffer(Matrix[CurRow], NumberOfCols * SizeOf(Int32)) ); end; end;

  Read the article

• How to Prevent PostBack Event Handler from Firing

  - by user331744

  I have a custom class (ServerSideValidator.vb) that validates user input on server side (it doesn't use any of the .NET built in validators, therefore Page.Validate() is not an option for me). I am calling the Validate() method on page.IsPostback event and the class performs without any problem My issue is, when validation fails (returns false), I want to stop the postback event handler from firing, but load the page along with all the controls and user-input values in them. If I do, Response.End(), the page comes up blank. I can programmatically instruct the page to go to the previous page (original form before postback), but it loses all user-inputs. I thought of creating a global boolean variable in the page code behind file and check the value before performing any postback method, but this approach takes away from my plan to provide all functionalities inside the class itself. The page object is being referenced to ServerSideValidator. Seems like all the postback related properties/variables I come across inside Page class are 'Readonly' and I can't assign value(s) to control/prevent postback event from firing. Any idiea on how I can accomplish this? Please let me know if you need further details

  Read the article

• A F# tail-recursive question

  - by ksharp

  Recently, I'm learning F#. I try to solve problem in different ways. Like this: (* [0;1;2;3;4;5;6;7;8] -> [(0,1,2);(3,4,5);(6,7,8)] *) //head-recursive let rec toTriplet_v1 list= match list with | a::b::c::t -> (a,b,c)::(toTriplet_v1 t) | _ -> [] //tail-recursive let toTriplet_v2 list= let rec loop lst acc= match lst with | a::b::c::t -> loop t ((a,b,c)::acc) | _ -> acc loop list [] //tail-recursive(???) let toTriplet_v3 list= let rec loop lst accfun= match lst with | a::b::c::t -> loop t (fun ls -> accfun ((a,b,c)::ls)) | _ -> accfun [] loop list (fun x -> x) let funs = [toTriplet_v1; toTriplet_v2; toTriplet_v3]; funs |> List.map (fun x -> x [0..8]) |> List.iteri (fun i x -> printfn "V%d : %A" (i+1) x) I thought the results of V2 and V3 should be the same. But, I get the result below: V1 : [(0, 1, 2); (3, 4, 5); (6, 7, 8)] V2 : [(6, 7, 8); (3, 4, 5); (0, 1, 2)] V3 : [(0, 1, 2); (3, 4, 5); (6, 7, 8)] Why the results of V2 and V3 are different?

  Read the article

• Looking for Simplified Overview of EJB3

  - by sdoca

  Hi I'm looking for a simplified overview of EJB3 components. I seem to understand most of the pieces of the puzzle, but can't quite get them to fit together in my brain as a full picture. I've developed numerous web applications (wars) that have been deployed on Tomcat before, but not a full-fledged EE application (ear). I would like the overview to be as generic as possible. I'm not looking for a tutorial on how to set up EJB3 on Glassfish built in NetBeans or some other vendor specific tutorial that's more about the IDE than the technology. I keep reading about Java, ejb-jar, web and ear modules but am not clear on what these different modules contain and how to use them to put together my app. In my case, I want to write a simple database CRUD web application. The first step is simple; create entity classes that model the database tables my app will be using. I plan on using annotations. Should I create a jar that contains just these enity classes? Is this the ejb-jar module (sometimes referred to as the Java module)? Next, I'll need some business logic classes that make use of the entity classes. These are the session beans (stateless or stateful) correct? Should these be packaged in the same jar as the entity classes or a separate jar? Finally, I'll need some sort of web interface (I'll be creating a JSF portlet) application that makes use of the both the session and entity beans. Together with the above jar(s), this will be my war? Assuming the above to be correct, what is involved in creating an ear? Forgive me if this post is vague, but I'm having a hard time defining what it is I don't understand. Thanks for any help!

  Read the article

• basic file input using C

  - by user1781966

  So im working on learning how to do file I/O, but the book I'm using is terrible at teaching how to receive input from a file. Below is is their example of how to receive input from a file, but it doesn't work. I have copied it word for word, and it should loop through a list of names until it reaches the end of the file( or so they say in the book), but it doesn't. In fact if I leave the while loop in there, it doesn't print anything. #include <stdio.h> #include <conio.h> int main() { char name[10]; FILE*pRead; pRead=fopen("test.txt", "r"); if (pRead==NULL) { printf("file cannot be opened"); }else printf("contents of test.txt"); fscanf(pRead,"%s",name); while(!feof(pRead)) { printf("%s\n",name); fscanf(pRead, "%s", name); } getch(); } Even online, every beginners tutorial I see does some variation of this, but I can't seem to get it to work even a little bit.

  Read the article

• MYSQL/PHP: Inserting data via HTML form, same "input name"

  - by Camen

  I'm new to MySQL and as a learning project I'd like to make a recipe database. I'd like to the user to be able to enter ingredients through a simple HTML form but I'm stuck in how to label the form so that I can enter several ingredients into the database at once. I'd like to do something like this: <form method="post" action="insert.php"> Ingredient 1: <input type="text" name="ingredient"><br /> Ingredient 2: <input type="text" name="ingredient"><br /> Ingredient 3: <input type="text" name="ingredient"><br /> <input type="submit" value="Submit"> </form> When I do this, I add rows to the table but they're all empty. I know it's got something to do with me using "ingredient" (the table value where I want to add the ingredient name) several times in the form, but I just don't know how to solve it. I would absolutely love some input on how to make it work.

  Read the article

• What's the most trivial function that would benfit from being computed on a GPU?

  - by hanDerPeder

  Hi. I'm just starting out learning OpenCL. I'm trying to get a feel for what performance gains to expect when moving functions/algorithms to the GPU. The most basic kernel given in most tutorials is a kernel that takes two arrays of numbers and sums the value at the corresponding indexes and adds them to a third array, like so: __kernel void add(__global float *a, __global float *b, __global float *answer) { int gid = get_global_id(0); answer[gid] = a[gid] + b[gid]; } __kernel void sub(__global float* n, __global float* answer) { int gid = get_global_id(0); answer[gid] = n[gid] - 2; } __kernel void ranksort(__global const float *a, __global float *answer) { int gid = get_global_id(0); int gSize = get_global_size(0); int x = 0; for(int i = 0; i < gSize; i++){ if(a[gid] > a[i]) x++; } answer[x] = a[gid]; } I am assuming that you could never justify computing this on the GPU, the memory transfer would out weight the time it would take computing this on the CPU by magnitudes (I might be wrong about this, hence this question). What I am wondering is what would be the most trivial example where you would expect significant speedup when using a OpenCL kernel instead of the CPU?

  Read the article

• When is Googling it wrong?

  - by Drahcir

  I've been going through Stack Overflow for quite a bit now and noticed certain people (usually experienced programmers) frown upon Googling (researching) certain problems. Since I myself tend to use Google quite a bit to solve certain programming related issues I found certain comments rather demoralising. Now some of you may have come here trigger happy to delete this post but I needed some clarification. I usually Google things that usually syntax related that I would have never figured out on my own. For example I once wondered how to access the properties of a class that I didn't have a direct relationship to. So after a bit of research I discovered reflection and got what I wanted. Now in another scenario is learning a new language, in my case Silverlight were it differs in certain aspects of .NET compared to say ASP.NET. A few weeks ago I had no idea how to load another Silverlight page (usercontrol) and had to Google my way to the solution which I found wasn't as simple as I had imagined. In scenario three is were I myself frown up, that is just stealing a huge chunk of code to avoid doing the work yourself, for example paging a HTML table using JavaScript, where one just copies and pastes the JavasSript code without as much as trying to understand how it works. I do admit I have done this once or twice before for trivial tasks that had very little time limit and weren't all that important but most of the time still have to throw away what I found because it took too much time to adapt it and get what I wanted out of it. In the last scenario, I sometimes have a piece of code that I would be really unhappy about, as in I find it sloppy or too overcomplicated and try to look on the Internet to see other ways to tackle the same problem, let's say filtering through a table. With the knowledge I acquire I learned new coding practices that help me work more efficiently like "Do not repeat yourself" and such. Now in your opinion when do you find it wrong to use Google (or any other researching tool) to find a solution to your problem?

  Read the article

• Zend Framework Application: module dependencies

  - by takeshin

  How do you handle dependencies between modules in Zend Framework to create reusable, drop-in modules? E.g. I have Newsletter module, which allows users to subscribe, providing e-mail address. Next, I plan to add Blog module, which allows to subscribe to posts by e-mail (it obviously duplicates some functionality of the newsletter, but the e-mails addresses are stored in User model). Next one is the Forum module, with the same subscribe to post functionality. But I want to have ability to use these modules independent to each one, i.e. application with newsletter alone, newsletter with blog, comibnation two or three modules at once. This is pretty common, e.g. the same story with search feature. I want to have search module, with options to search in all data, blog data or forum data if available. Is there any design pattern for this? Do I have to add some moduleExists($moduleMame), or provide some interface or abstract classes, some base controller pattern, similar for each module?

  Read the article

• insert multiple rows into database from arrays

  - by Mark

  Hi, i need some help with inserting multiple rows from different arrays into my database. I am making the database for a seating plan, for each seating block there is 5 rows (A-E) with each row having 15 seats. my DB rows are seat_id, seat_block, seat_row, seat_number, therefore i need to add 15 seat_numbers for each seat_row and 5 seat_rows for each seat_block. I mocked it up with some foreach loops but need some help turning it into an (hopefully single) SQL statement. $blocks = array("A","B","C","D"); $seat_rows = array("A","B","C","D","E"); $seat_nums = array("1","2","3","4","5","6","7","8","9","10","11","12","13","14","15"); foreach($blocks as $block){ echo "<br><br>"; echo "Block: " . $block . " - "; foreach($seat_rows as $rows){ echo "Row: " . $rows . ", "; foreach($seat_nums as $seats){ echo "seat:" . $seats . " "; } } } Maybe there's a better way of doing it instead of using arrays? i just want to avoid writing an SQL statement that is over 100 lines long ;) (im using codeigniter too if anyone knows of a CI specific way of doing it but im not too bothered about that)

  Read the article

• Node.js/Express Partials problem: Can't be nested too deep?

  - by heorling

  I'm learning Node.js, Express, haml.js and liking it. I've run into a prety annoying problem though. I'm pretty new to this but have been getting nice results so far. I'm writing a jquery heavy web app that relies on a table containing divs. The divs slide around, switch back and fourth and are resized etc to my hearts content. What I'm looking for a way to switch (template?) the divs. Since I've been building in express and mimicking the chat example it would make sense to use partials. The rub is that I've been using inexplicit divs in haml, held within a td. The divs are cunstructed as follows: %tr %td .class1.class2.class3.classetc Which has worked fine cross browser. Parsing the classes works great for the js code to pass arguments around, fetch values etc. What I'd like to be able to do is something like: %tr %td .class1.class2.class3.classetc %ul#messages != this.partial('message.html.haml', { collection: messages }) Any combination I've tried with this has failed however. And I might have tried them all. If I could put a partial into that div I'd probably be set. And you can nest them as long as you use #ids instead of .classes. But if you use more than one class it breaks! I think that's the most accurate way of summing it up. How do you do this? I've checked out various templating solutions like mu.js and micro template like by John Resig. I earlier checked out this thread on templating engines. It's very possible I'm making some fundamental mistake here, I'm new to this. What's a good way to do this?

  Read the article

• Is there a better way to change user password in cakephp using Auth?

  - by sipiatti

  Hi, I am learning cakephp by myself. I tried to create a user controller with a changepassword function. It works, but I am not sure if this is the best way, and I could not googled up useful tutorials on this. Here is my code: class UsersController extends AppController { var $name = 'Users'; function login() { } function logout() { $this->redirect($this->Auth->logout()); } function changepassword() { $session=$this->Session->read(); $id=$session['Auth']['User']['id']; $user=$this->User->find('first',array('conditions' => array('id' => $id))); $this->set('user',$user); if (!empty($this->data)) { if ($this->Auth->password($this->data['User']['password'])==$user['User']['password']) { if ($this->data['User']['passwordn']==$this->data['User']['password2']) { // Passwords match, continue processing $data=$this->data; $this->data=$user; $this->data['User']['password']=$this->Auth->password($data['User']['passwordn']); $this->User->id=$id; $this->User->save($this->data); $this->Session->setFlash('Password changed.'); $this->redirect(array('controller'=>'Toners','action' => 'index')); } else { $this->Session->setFlash('New passwords differ.'); } } else { $this->Session->setFlash('Typed passwords did not match.'); } } } } password is the old password, passwordn is the new one, password2 is the new one retyped. Is there any other, more coomon way to do it in cake?

  Read the article

< Previous Page | 369 370 371 372 373 374 375 376 377 378 379 380  | Next Page >