Search Results

Search found 24814 results on 993 pages for 'linux distro'.

Page 373/993 | < Previous Page | 369 370 371 372 373 374 375 376 377 378 379 380  | Next Page >

  • Problem about IP and computer name in Ubuntu

    - by bugbug
    I can't connect to mysql database becase it alway change 192.168.1.101 to ubuntu.local. $ mysql -uroot -padmin1234 -h192.168.1.101 ERROR 1045 (28000) : Access denined for user 'root'@'ubuntu.local' (using password: YES) How do I solve this problem. File: /etc/hosts in this machine 127.0.0.1 localhost 127.0.1.1 ubuntu.ubuntu-domain ubuntu # The following lines are desirable for IPv6 capable hosts ::1 localhost ip6-localhost ip6-loopback fe00::0 ip6-localnet ff00::0 ip6-mcastprefix ff02::1 ip6-allnodes ff02::2 ip6-allrouters ff02::3 ip6-allhosts I have no idea about "root'@'ubuntu.local", where is it come from.

    Read the article

  • Permissions nightmare - tried all I know

    - by Ben
    Working on a new client's dev site, which is a wordpress install on a Plesk box. I have SSH root access, and FTP access through a separate account. What I've done so far Initially I couldn't make any changes to any files at all. The permissions on all the template files looked a little screwy (644), so I figured change them to allow group, and add myself to the group: CHMOD Recursive on the theme folder to set everything to 664 Quickly realised I'd broken it, set the folders to 755, kept files as 664 Ownership on all files is a mixture of root:root and 500:500 (there is no user nor group with the ID of 500 on the server). Added myself to the group 'root' so I could modify the files too The Problem This worked OK, in terms of being able to edit the existing files, so I began working. However, I can't upload to the directory, even having run CHOWN -R root:root templatefolder/ and being in the root group. I feel like I must be missing something obvious, and it's doing my head in. Questions: Files in the install owned by 500 with group 500 - I've looked in /etc/group and /etc/passwd and there is no user nor group with this ID. Is that left over from another developer's setup or the previous server (they moved recently)? Is being in the 'root' group enough, or do I need to own the theme folder as 'myftpuser' in order to upload and create new files? Like I say, I have edit access, so I got myself this far. I'm now questioning what to do next!

    Read the article

  • Configure all hosts, then create a list of the config for all hosts?

    - by AME
    I deployed a huge number of hosts with Ansible - which did work very nice. Each host got its individual settings and configuration. Now I'd like to generate a config file for another system that uses these hosts. For it, I need for every host a part of the generated configuration (the one that configures the database). Here is an example of the situation with two hosts having different configuration and the other system that uses a part of the Ansible-generated configuration: host1 ansible configured dbA host2 ansible configured dbQ The other system: host1 = dbA host2 = dbQ The values are computed differently (dbQ instead of dbB for host2 for example) if it belongs in a different cluster and so on, making it unpractical to just read out host configuration from the host_vars. I believe I would need to iterate over the hosts and let Ansible figure out the computed values for the variables like it would when deploying, but I do not know how to put that result in one template. Please advise :)

    Read the article

  • How to stop syslog from listening to 514 on CentOS 5.8

    - by Jim
    I have a CentOS 5.8 machine (with regular syslog) that for some reason is listening to port 514, even though it is not started with "-r" (to receive remote syslog messages). # netstat -tulpn | grep 514 udp 0 0 0.0.0.0:514 0.0.0.0:* 2698/syslogd Syslog is started with only "-m 0": ps -ef | grep syslogd root 2698 1 0 15:55 ? 00:00:00 syslogd -m 0 I have tried starting it with "-m 0 -r", just to check if there was any difference, but there is not. This machine is a client and should only log to a central log server - it should not be listening itself. What am I missing?

    Read the article

  • Ubuntu won't boot from USB memory stick

    - by mackenir
    I used the instructions on this webpage to create a bootable USB drive for running Ubuntu 9.10. Unfortunately it doesn't work on my EeePC. Even with 'Removable Dev.' selected in the BIOS as the first boot device, the PC just boots into Windows 7. How do I troubleshoot this problem? The drive is readable and looks like this: Directory of E:\ 28/10/2009 21:14 <DIR> .disk 28/10/2009 21:14 222 README.diskdefines 28/10/2009 21:14 143 autorun.inf 28/10/2009 21:14 <DIR> casper 28/10/2009 21:14 <DIR> dists 28/10/2009 21:14 <DIR> install 28/10/2009 21:14 <DIR> syslinux 28/10/2009 21:14 4,098 md5sum.txt 28/10/2009 21:14 <DIR> pics 28/10/2009 21:14 <DIR> pool 28/10/2009 21:14 <DIR> preseed 28/10/2009 21:14 0 ubuntu 26/10/2009 16:16 1,468,640 wubi.exe 25/02/2010 00:28 2,147,483,648 casper-rw 8 Dir(s) 5,290,307,584 bytes free

    Read the article

  • ACL and moving files in Nautilus

    - by MyOnlyEye
    When I move files from a private home directory (e.g. /home/jack) to a shared directory (e.g. /home/shared-school) Nautilus copies the file permissions from the original file into the shared directory - and ignores the ACL that I've put in the /home/shared-school directory (e.g. setfacl -R -m d:g:school:rwx /home/shared-school). Is it possible to force Nautilus to change ACL on a file that is moved or copied - or not to ignore the ACL on the directory where the files are moved or copied?

    Read the article

  • My mail going on spam from SMTP server

    - by user1767434
    I am trying to send a registration confirmation mail from my site to user who are registering from my site. my code is:- $drg_name = addslashes(trim($_POST['drg_name'])); $drg_surname = addslashes(trim($_POST['drg_surname'])); $drg_email = addslashes(trim($_POST['drg_email'])); $drg_username = addslashes(trim($_POST['drg_username'])); $drg_pass = addslashes(base64_encode($_POST['drg_pass'])); $drg_addr1 = addslashes(trim($_POST['drg_addr1'])); $drg_addr2 = addslashes(trim($_POST['drg_addr2'])); $drg_addr3 = addslashes(trim($_POST['drg_addr3'])); $drg_town = addslashes(trim($_POST['drg_town'])); $drg_county = addslashes(trim($_POST['drg_county'])); $drg_zip = addslashes(trim($_POST['drg_zip'])); $drg_country = addslashes(trim($_POST['drg_country'])); $drg_phone = addslashes(trim($_POST['drg_phone'])); $drg_gender = addslashes(trim($_POST['drg_gender'])); $drg_pstatus = addslashes(trim($_POST['drg_pstatus'])); $drg_dod = addslashes(trim($_POST['drg_dod'])); $drg_dom = addslashes(trim($_POST['drg_dom'])); $drg_doy = addslashes(trim($_POST['drg_doy'])); $drg_dob=$drg_dod.'/'.$drg_dom.'/'.$drg_doy; $drg_question = addslashes(trim($_POST['drg_question'])); $drg_answer = addslashes(trim($_POST['drg_answer'])); //send confirmation email to user to activate his/her acc $encoded_usr_id=base64_encode($usr_id); $en_id=base64_encode($insert_id); $subject = "Confirmation From dragonsnet.biz" ; $message = "Thank you to register with dragonsnet.biz<br>\n In order to >activate your account please click here: http://My SITE URL/registration_success.php?envar=".$encoded_usr_id."&euid=".$en_id."' Activate\n Thank you for taking the time to register to the dragonsnet.biz Website. "; $this->_globalObj->send_email('support@ MY-Site', $drg_email, $subject, $message, 'Site Name'); $cnf=base64_encode("confirmation"); die($this->_globalObj->redirect("registration_confirmation.php?eml=$cnf")); } my mail is going in user mail ID but in Spam not in inbox. Please help Thanks In Advance.

    Read the article

  • How to determine the Kerberos realm from an LDAP directory?

    - by tstm
    I have two Kerberos realms I can authenticate against. One of them I can control, and the other one is external from my point of view. I also have an internal user database in LDAP. Let's say the realms are INTERNAL.COM and EXTERNAL.COM. In ldap I have user entries like this: 1054 uid=testuser,ou=People,dc=tml,dc=hut,dc=fi shadowFlag: 0 shadowMin: -1 loginShell: /bin/bash shadowInactive: -1 displayName: User Test objectClass: top objectClass: account objectClass: posixAccount objectClass: shadowAccount objectClass: person objectClass: organizationalPerson objectClass: inetOrgPerson uidNumber: 1059 shadowWarning: 14 uid: testuser shadowMax: 99999 gidNumber: 1024 gecos: User Test sn: Test homeDirectory: /home/testuser mail: [email protected] givenName: User shadowLastChange: 15504 shadowExpire: 15522 cn: User.Test userPassword: {SASL}[email protected] What I would like to do, somehow, is to specify per-user basis to which authentication server / realm the user is authenticated against. Configuring kerberos to handle multiple realms is easy. But how to I configure other instances, like PAM, to handle the fact that some users are from INTERNAL.COM and some from EXTERNAL.COM? There needs to be an LDAP lookup of some kind where the realm and the authentication name is fetched from, and then the actual authentication itself. Is there a standardized way to add this information to LDAP, or look it up? Are there some other workarounds for a multi-realm user base? I might be ok with a single realm solution, too, as long as I can specify the user name - realm -combination for the user separately.

    Read the article

  • Hybrid gmail MX + postfix for local accounts

    - by krunk
    Here's the setup: We have a domain, mydomain.com. Everything is on our own server, except general email accounts which are through gmail. Currently gmail is set as the MX record. The server also has various email aliases it needs to support for bug trackers and such. e.g. [email protected] |/path/to/issuetracker.script I'm struggling with a setup that allows the following, both locally and from user's email clients. guser1 - has a gmail account and a local account guser2 - only has a gmail account bugs - has a pipe alias in /etc/aliases for issue tracker Scenarios mail to [email protected] from local host (crons and such) needs to go to gmail account mail to [email protected] from local host mail to [email protected] needs to be piped to the local issue tracker script So, the first stab was creating a transport map. In this scenario, the our server would be set as teh MX and guser* destined emails are sent to gmail. Put the gmail users in a map like so: [email protected] smtp:gmailsmtp:25 [email protected] smtp:gmailsmtp:25 Problems: Ignores extensions such as [email protected] Only works if append_at_myorigin = no (if set to yes, gmail refuses to connect with: E4C7E3E09BA3: to=, relay=none, delay=0.05, delays=0.02/0.01/0.02/0, dsn=4.4.1, status=deferred (connect to gmail-smtp-in.l.google.com[209.85.222.57]:25: Connection refused)) since append_at_myorigin is set to no, all received emails have (unknown sender) The second stab was to set explicit localhost aliases in /etc/aliases and do a domain wide forward on mydomain. This too requires setting the local server as the MX: root: root@localhost # transport mydomain.com smtp:gmailsmtp:25 Problems: * If I create a transport map for a domain that matches "$myhostname", the aliases file is never parsed. So when a local user (or daemon) sends an email like: mail -s "testing" root < text.txt Postfix ignores the /etc/alias entry and maps to [email protected] and attempts to send it to the gmail transport mapping. Third stab: Create a subdomain for the bugs, something like bugs.mydomain.com. Set the MX for this domain to local server and leave the MX for mydomain.com to the Gmail server. Problems: * Does not solve the issue with local accounts. So when the bug tracker responds to an email from [email protected], it uses a local transport and the user never receives the email. % postconf -n alias_database = hash:/etc/aliases alias_maps = hash:/etc/aliases append_at_myorigin = no append_dot_mydomain = no biff = no config_directory = /etc/postfix inet_interfaces = all mailbox_command = procmail -a "$EXTENSION" mailbox_size_limit = 0 mydestination = $myhostname, localhost.$myhostname, localhost myhostname = mydomain.com mynetworks = 127.0.0.0/8 [::ffff:127.0.0.0]/104 [::1]/128 myorigin = /etc/mailname readme_directory = no recipient_delimiter = + relayhost = smtp_tls_cert_file = /etc/ssl/certs/kspace.pem smtp_tls_enforce_peername = no smtp_tls_key_file = /etc/ssl/certs/kspace.pem smtp_tls_note_starttls_offer = yes smtp_tls_scert_verifydepth = 5 smtp_tls_session_cache_database = btree:${data_directory}/smtp_scache smtp_use_tls = yes smtpd_banner = $myhostname ESMTP $mail_name (Debian/GNU) smtpd_recipient_restrictions = permit_mynetworks, reject_invalid_hostname, reject_non_fqdn_sender, reject_non_fqdn_recipient, reject_unknown_sender_domain, reject_unknown_recipient_domain, reject_unauth_destination smtpd_tls_ask_ccert = yes smtpd_tls_req_ccert = no smtpd_tls_session_cache_database = btree:${data_directory}/smtpd_scache tls_random_source = dev:/dev/urandom transport_maps = hash:/etc/postfix/transport

    Read the article

  • What parameters to mdadm, to re-create md device with payload starting at 0x22000 position on backing storage?

    - by Adam Ryczkowski
    I try to recover from mdadm raid disaster, which happened when moving from ubuntu server 10.04 to 12.04. I know the correct order of devices from dmesg log, but given this information, I still cannot access the data. The superblocks look messy; the mdadm --examine for each disk is on this question on askubuntu By inspecting the raw contents of backing storage, I found the beginning of my data (the LUKS container in my case) at position 0x22000 relative to the beginning of the first partition in the raid. Question: What is the combination of options issued to "mdadm --create" to re-create mdadm that starts with the given offset? Bitmap size? PS. The relevant information from syslog when the system was healthy are pasted here.

    Read the article

  • How to get an inactive RAID device working again?

    - by Jonik
    After booting, my RAID1 device (/dev/md_d0 *) sometimes goes in some funny state and I cannot mount it. * Originally I created /dev/md0 but it has somehow changed itself into /dev/md_d0. # mount /opt mount: wrong fs type, bad option, bad superblock on /dev/md_d0, missing codepage or helper program, or other error (could this be the IDE device where you in fact use ide-scsi so that sr0 or sda or so is needed?) In some cases useful info is found in syslog - try dmesg | tail or so The RAID device appears to be inactive somehow: # cat /proc/mdstat Personalities : [linear] [multipath] [raid0] [raid1] [raid6] [raid5] [raid4] [raid10] md_d0 : inactive sda4[0](S) 241095104 blocks # mdadm --detail /dev/md_d0 mdadm: md device /dev/md_d0 does not appear to be active. Question is, how to make active the device again (using mdmadm, I presume)? (Other times it's alright (active) after boot, and I can mount it manually without problems. But it still won't mount automatically even though I have it in /etc/fstab: /dev/md_d0 /opt ext4 defaults 0 0 So a bonus question: what should I do to make the RAID device automatically mount at /opt at boot time?) This is an Ubuntu 9.10 workstation. Background info about my RAID setup in this question.

    Read the article

  • Unattended Kickstart Install

    - by Eric
    I've looked around quite a bit and have seen similar setup and questions, but none seem to work for me. I'm using the following command to create a custom ISO: /usr/bin/livecd-creator --config=/usr/share/livecd-tools/test.ks --fslabel=TestAppliance --cache=/var/cache/live This works great and it creates the ISO with all of the packages and configs I want on it. My issue is that I want the install to be unattended. However, every time I start the CD, it asks for all of the info such as keyboard, time zone, root password, etc. These are my basic settings I have in my kickstart script prior to the packages section. cdrom install autopart autostep xconfig --startxonboot rootpw testpassword lang en_US.UTF-8 keyboard us timezone --utc America/New_York auth --useshadow --enablemd5 selinux --disabled services --enabled=iptables,rsyslog,sshd,ntpd,NetworkManager,network --disabled=sendmail,cups,firstboot,ip6tables clearpart --all So after looking around, I was told that I need to modify my isolinux.cfg file to either do "ks=http://X.X.X.X/location/to/test.ks" or "ks=cdrom:/test.ks". I've tried both methods and it still forces me to go through the install process. When I tail the apache logs on the server, I see that the ISO never even tries to get the file. Below are the exact syntax I'm trying on my isolinux.cfg file. label http menu label HTTP kernel vmlinuz0 append initrd=initrd0.img ks=http://192.168.56.101/files/test.ks ksdevice=eth0 label localks menu label LocalKS kernel vmlinuz0 append initrd=initrd0.img ks=cdrom:/test.ks label install0 menu label Install kernel vmlinuz0 append initrd=initrd0.img root=live:CDLABEL=PerimeterAppliance rootfstype=auto ro liveimg liveinst noswap rd_NO_LUKS rd_NO_MD rd_NO_DM menu default EOF_boot_menu The first 2 give me a "dracut: fatal: no or empty root=" error until I give it a root= option and then it just skips the kickstart completely. The last one is my default option that works fine, but just requires a lot of user input. Any help would be greatly appreciated.

    Read the article

  • How to run KDM or GDM over ssh

    - by Xolve
    I have a computer on LAN running ssh. I can normally tunnel the GUI application using ssh computer-name -X program-name But I wam my full desktop to be running on a remote computer using ssh so that I can just use that computer remotely like a local desktop. For this I think I will need to run KDM (or GDM ) remotely, what configuration do I need to do to make this happen?

    Read the article

  • /etc/init.d/libvirtd start fails but service libvirtd start works. Why?

    - by Gregg
    CentOS 6.3, running as root (Shush). Can you please tell me why I would get initialisation failures from the init scripts but the service command works a treat? There was nothing in /var/log/messages or /var/log/libvirt/* all I have it the Terminal output: /etc/init.d/libvirtd start Starting libvirtd daemon: libvirtd: initialization failed [FAILED] I changed the libvirtd logging level to 1, the highest, but saw nothing in messages after another failure.

    Read the article

  • Can enabling a RAID controller's writeback cache harm overall performance?

    - by Nathan O'Sullivan
    I have an 8 drive RAID 10 setup connected to an Adaptec 5805Z, running Centos 5.5 and deadline scheduler. A basic dd read test shows 400mb/sec, and a basic dd write test shows about the same. When I run the two simultaneously, I see the read speed drop to ~5mb/sec while the write speed stays at more or less the same 400mb/sec. The output of iostat -x as you would expect, shows that very few read transactions are being executed while the disk is bombarded with writes. If i turn the controller's writeback cache off, I dont see a 50:50 split but I do see a marked improvement, somewhere around 100mb/s reads and 300mb/s writes. I've also found if I lower the nr_requests setting on the drive's queue (somewhere around 8 seems optimal) I can end up with 150mb/sec reads and 150mb/sec writes; ie. a reduction in total throughput but certainly more suitable for my workload. Is this a real phenomenon? Or is my synthetic test too simplistic? The reason this could happen seems clear enough, when the scheduler switches from reads to writes, it can run heaps of write requests because they all just land in the controllers cache but must be carried out at some point. I would guess the actual disk writes are occuring when the scheduler starts trying to perform reads again, resulting in very few read requests being executed. This seems a reasonable explanation, but it also seems like a massive drawback to using writeback cache on an system with non-trivial write loads. I've been searching for discussions around this all afternoon and found nothing. What am I missing?

    Read the article

  • Basic OpenVPN setup not working

    - by WalterJ89
    I am attempting to connect 2 win7 (x64+ x32) computers (there will be 4 in total) using OpenVPN. Right now they are on the same network but the intention is to be able to access the client remotely regardless of its location. The Problem I am having is I am unable to ping or tracert between the two computers. They seem to be on different subnets even though I have the mask set to 255.255.255.0. The server ends up as 10.8.0.1 255.255.255.252 and the client 10.8.0.6 255.255.255.252. And a third ends up as 10.8.0.10. I don't know if this a Windows 7 problem or something I have wrong in my config. Its a very simple set up, I'm not connecting two LANs. this is the server config (removed all the extra lines because it was too ugly) port 1194 proto udp dev tun ca keys/ca.crt cert keys/server.crt key keys/server.key # This file should be kept secret dh keys/dh1024.pem server 10.8.0.0 255.255.255.0 ifconfig-pool-persist ipp.txt client-to-client duplicate-cn keepalive 10 120 comp-lzo persist-key persist-tun status openvpn-status.log verb 6 this is the client config client dev tun proto udp remote thisdomainis.random.com 1194 resolv-retry infinite nobind persist-key persist-tun ca keys/ca.crt cert keys/client.crt key keys/client.key ns-cert-type server comp-lzo verb 6 Is there anything I missed in this? keys are all correct and the vpn's connect fine, its just the subnet or route issue. Thank You EDIT it seems on the server the openvpn-status.log has the routes for the client SERVER OpenVPN CLIENT LIST Updated,Wed May 19 18:26:32 2010 Common Name,Real Address,Bytes Received,Bytes Sent,Connected Since client,192.168.10.102:50517,19157,20208,Wed May 19 17:38:25 2010 ROUTING TABLE Virtual Address,Common Name,Real Address,Last Ref 10.8.0.6,client,192.168.10.102:50517,Wed May 19 17:38:56 2010 GLOBAL STATS Max bcast/mcast queue length,0 END Also this is from the client.log file: Which seems to be correct C:\WINDOWS\system32\route.exe ADD 10.8.0.0 MASK 255.255.255.0 10.8.0.5 Another EDIT 'route print' on the server shows the route: Destination Mask Gateway Interface 10.8.0.0 255.255.255.0 10.8.0.2 10.8.0.1 the same on the client shows 10.8.0.0 255.255.255.0 10.8.0.5 10.8.0.6 So the routes are there.. what can the problem be? Is there anything wrong with my configs? Why would OpenVPN be having problems communicating?

    Read the article

  • PacketFence Installation?

    - by Charles Miton
    So I've stumbled across PacketFence during my search for a decent Network Access Control system. After doing a little research about it's capabilities I've come to realize it's meets all the requirements that I was looking for. Unfortunately, being primarily a MS Administrator, I'm having many issues trying to successfully getting it up and running. Is there anyone or any place that has a step-by-step tutorial on how to do this? I love the prospect of using Open Source software, but need some help jumping this particular hurdle. I'm trying to use CentOS for the OS but I'm open to alternatives if thats what it takes to get this system up and running.

    Read the article

  • Simple NNTP client for Ubuntu

    - by Alexander Gladysh
    I need to download a particular NNTP group. I do not need to setup any crons, put group contents in /opt and other stuff. Just run <fetch-nntp> <server> <group-name> <output-dir> and be done with it without putting a lot of garbage in the system. If that <fetch-nntp> would not fetch the same messages on the second run — fine. But I can live without it. All NNTP clients that I've looked at are trying to be a NNTP server as well. Is there something simpler that is suitable for my needs?

    Read the article

  • IPv6 Routing / Subnetting

    - by nappo
    Recently I have installed Citrix Xen Server 6.2 on a machine. My Provider (Hetzner) gave me the IPv6 Subnet 2a01:4f8:200:xxxx::/64. Followed an article in the providers wiki (1) i got it working and can assign IPs to my guests (CentOS). However i can't assign a second IP to a single guest - it will result in a timeout. I'm not very familiar with IPv6 routing / subnetting - any help or tips for further troubleshooting is welcome! My Setup: XenServer 6.2 IPv6: 2a01:4f8:200:xxxx::2/112 ip -6 route: 2a01:4f8:200:xxxx::/112 dev xenbr0 proto kernel metric 256 mtu 1500 advmss 1440 hoplimit 0 fe80::1 dev xenbr0 metric 1024 mtu 1500 advmss 1440 hoplimit 0 default via fe80::1 dev xenbr0 metric 1024 mtu 1500 advmss 1440 hoplimit 0 Guest 1 IPv6: 2a01:4f8:200:xxxx::3/64 IPv6: 2a01:4f8:200:xxxx::4/64 ip -6 route: 2a01:4f8:200:xxxx::/64 dev eth0 proto kernel metric 256 mtu 1500 advmss 1440 hoplimit 4294967295 fe80::/64 dev eth0 proto kernel metric 256 mtu 1500 advmss 1440 hoplimit 4294967295 default via fe80::1 dev eth0 metric 1 mtu 1500 advmss 1440 hoplimit 4294967295 Guest 2 IPv6: 2a01:4f8:200:xxxx::5/64 Guest 1 IPv6 is working fine, Guest 2 too. As suggested by the wiki article (1) i split my /64 network into a /112. Is it right to set the host /112 and the guests /64? Why is that?

    Read the article

< Previous Page | 369 370 371 372 373 374 375 376 377 378 379 380  | Next Page >