Search Results

Search found 18598 results on 744 pages for 'result'.

Page 373/744 | < Previous Page | 369 370 371 372 373 374 375 376 377 378 379 380  | Next Page >

• How can I change my mysql user that has all privileges on a database to only have select privileges on one specific table?

  - by Glenn

  I gave my mysql user the "GRANT ALL PRIVILEGES ON database_name.* to my_user@localhost" treatment. Now I would like to be more granular, starting with lowering privileges on a specific table. I am hoping mysql has or can be set to follow a "least amount of privileges" policy, so I can keep the current setup and lower it for the one table. But I have not seen anything like this in the docs or online. Other than removing the DB level grant and re-granting on a table level, is there a way to get the same result by adding another rule?

  Read the article

• What is the advantage of iSCSI over SMB?

  - by sofakng

  At my house I'm running a Hyper-V server with a Windows Server 2008 R2 VM acting as a file server. Files are shared across my network using SMB. (Also, the machine is using a PERC 6/i RAID card but I don't think that's important) I'm thinking about setting up a dedicated SAN (iSCSI) machine and then switching my Hyper-V server to ESXi. What are the advantages of using iSCSI versus SMB? I think I would still need a file server OS (eg. Win 2k8) sharing files via SMB so I'm not sure the end result would be any different than my current setup...

  Read the article

• Server 2008 Task Scheduler and a CMD file

  - by Mark Smith

  Task Scheduler - I have a .cmd file I'm trying to execute on a regular basis through Task Scheduler. I've set the task so that it points to the cmd file. I want the task to execute even when no one is logged in. I've set the credentials associated with the task to the local service account. When I execute the task, nothing happens. The Last Run Result shows 0x1, this means it didn't execute properly. When I run the file from a command prompt it executes just fine. Any help out there would be appreciated. I would post the code but it has sensitive information in it and I'm not allowed to let the code outside. Thanks

  Read the article

• iTunes home sharing problem

  - by Trev

  I have two iMacs running Snow Leopard. I have iTunes home sharing setup on the two of them using the same iTunes account credentials. Up until last night all worked fine... I could download an app on one iMac, then go to the other iMac and drag that app from the home sharing into that iMac's applications. Then all of a sudden it stopped working. I can see and browse the home sharing, however, when I go to drag an app or song from the share to the local library it gives me an error stating that I am unable to do so... when I click OK to this message I lose visibility to the home share. I have checked and this iMac is authorized with my iTunes account and I have even deauthorized and reauthorized but still the same result. Does anyone have any suggestions?

  Read the article

• Small business VPN solution

  - by Crash893

  I've been looking for a while but I'd like to to implement a vpn solution for anywhere from 1-5 employees at a time (possibly 10 in a year or so) edit: Basically I would like outside users to fire up a client or open a web page and be able to access things inside the company network (share drives / printers/ webapps /etc) I've looked at Astaro Gateway but im not sure if that's the right tool for the job. I know "best" is a subjective term so i would like to break it into to different suggestions 1) what is the cheapest solution given the criteria above 2) what solution will result in the least amount of headaches from the point of view of maintenance and learning curve.

  Read the article

• Japanese Multiplication simulation - is a program actually capable of improving calculation speed?

  - by jt0dd

  On SuperUser, I asked a (possibly silly) question about processors using mathematical shortcuts and would like to have a look at the possibility at the software application of that concept. I'd like to write a simulation of Japanese Multiplication to get benchmarks on large calculations utilizing the shortcut vs traditional CPU multiplication. I'm curious as to whether it makes sense to try this. My Question: I'd like to know whether or not a software math shortcut, as described above is actually a shortcut at all. This is a question of programming concept. By utilizing the simulation of Japanese Multiplication, is a program actually capable of improving calculation speed? Or am I doomed from the start? The answer to this question isn't required to determine whether or not the experiment will succeed, but rather whether or not it's logically possible for such a thing to occur in any program, using this concept as an example. My theory is that since addition is computed faster than multiplication, a simulation of Japanese multiplication may actually allow a program to multiply (large) numbers faster than the CPU arithmetic unit can. I think this would be a very interesting finding, if it proves to be true. If, in the multiplication of numbers of any immense size, the shortcut were to calculate the result via less instructions (or faster) than traditional ALU multiplication, I would consider the experiment a success.

  Read the article

• Can I install new version of Ubuntu in spair RAIDed partition with unetbootin

  - by artfulrobot

  I have Ubuntu 11.04 running on my home desktop which has 2 hard drives mirrored by RAID. The drives are partitioned with a big data partition, a swap partition and a couple of 20Gb partitions for OSes, one is 11.04 which is in use, and the other is kept spare for installing a later version. Which is what I'd like to do now. The idea of a 2nd partition for new OS is that I can try it, and if it's problematic, I can boot back into the original one - the machine is shared with others, so I need it to stay available! I have had horrible problems with software RAID after using a Live USB stick - basically it messes up the internal numbering of the RAID drives or something, anyway, the result is you can't boot after using it :-( and have to spend ages re-assembling the arrays, trying to remember grub commands etc etc. Quite a shocker when you consider booting from a Live USB is supposed not to affect the existing system. As I'm installing in a RAIDed disc, I would typically use the Alternative install (sad to hear that this is going to be dropped in future). However, I think I might be able to use unetbootin to trick the system into working on top of the existing system that understands RAID, with the normal ISO? If unetbootin loads from drives that are already understood to be RAIDED, then presumably it will only see md0... instead of sda, sdb... and as long as I don't need to repartition (I don't) it should be fine, right? Or is that just plain foolishness? Please tell me before I end up with a dead system (again!)

  Read the article

• On dual-boot iMac, after fixing "EFI Boot" issue, will booting Windows cause the same issue again?

  - by Shane

  On my dual-boot iMac, after fixing the well-known "EFI Boot" issue, will booting Windows cause the same issue again? I'm hesitant to try booting Windows until I hear from others. Details: It all started when I had been working in Windows and then re-booted into Mac OSX Snow Leopard. Any attempt to boot into OSX would result in two giveaway symptoms: 1) The MAC HD was re-named "EFI Boot", and 2) a gray progress bar stopped at 10% and the spinning wheel kept spinning - no joy. Many articles on Mac Forums describe the same thing, including the fix, which is to erasing the damaged partition and either: a) re-install the OS from DVD, or b) perform a Time Machine RESTORE (which I did). Is there anything I can do to keep enjoying the benefits of a dual-boot iMac without fear of a repeat problem and associated 2-hour restore from Time Machine?

  Read the article

• Developing momentum on open source projects

  - by sashang

  Hi I've been struggling to develop momentum contributing to open source projects. I have in the past tried with gcc and contributed a fix to libstdc++ but it was a once off and even though I spent months in my spare time on the dev mailing list and reading through things I just never seemed to develop any momentum with the code. Eventually I unsubscribed and got my free time back and uncluttered my mailbox. Like a lot of people I have some little open source defunct projects lying around on the net, but they're not large and I'm the only contributor. At the moment I'm more interested in contributing to a large open source project and want to know how people got started because I find it difficult while working full time to develop any momentum with the code base. Other more regular contributors, who are on the project full-time, are able to make changes at will and as result enter that positive feedback cycle where they understand the code and also know where it's heading. It makes the barrier to entry higher for those that come along later. My questions are to people who actively contribute to large opensource projects, like the Linux kernel, or gcc or clang/llvm or anything else with say a developer head count of more than 10. How did you get started? Was there a large chunk of time in your life that you just could dedicate to working on the project? I know in Linus's case he had a chunk of time (6 months) to get it started. What barriers to entry did you encounter? Can you describe the initial stages of the time spent with the project, from when you had little understanding of the code to when you understood enough to commit regularly. Thanks

  Read the article

• Firefox completes the address bar with content absent from my history

  - by Antoine

  I have set Firefox to complete the address bar with elements from the history only ( other options are: nothing, bookmarks, and a history+bookmarks). However, Firefox still continues to complete the address bar with elements that are no longer in my history. A search in the history returns 0 result for the incriminated string. How can I solve this without loosing my entire history? I have already tried shift+delete on the elements I would like to delete, without success. How can I find the source of a certain completion ? (like an SQL request in the sqlite3 files used to store history) I'm using Firefox 16.0.2 on OS X 10.8.2.

  Read the article

• How can Nagios handle non-threshold based plugins?

  - by FliesLikeABrick

  I am writing a Nagios plugin to monitor trends of a certain storage resource utilization (e.g. gradual increases are fine, but an instantaneous/sudden increase or decrease in resource usage may indicate a problem). For what it's worth, it is reviewing the last N entries in an RRD file generated by a custom cacti data source/templates. What is the "right" way to handle Nagios notification config/implementation for this? The problem is that it the plugin would exit as warning/critical for one polling period, but in the next it would be fine (or 3 polling periods later, if I look at 3 polling periods worth of data). I guess the question is: should I just write it in such a way that it will alert for X polling periods, or should I find a way to write it such that manual intervention is required for it to clear (such as logging into the monitoring server or hitting a URL to run a script that submits a passive result)? Your input is appreciated, and if you have any tips for how to implement the latter I'm open to them (I can think of a few ways to possibly implement it)

  Read the article

• Determine All SQL Server Table Sizes

  Im doing some work to migrate and optimize a large-ish (40GB) SQL Server database at the moment.  Moving such a database between data centers over the Internet is not without its challenges.  In my case, virtually all of the size of the database is the result of one table, which has over 200M rows of data.  To determine the size of this table on disk, you can run the sp_TableSize stored procedure, like so: EXEC sp_spaceused lq_ActivityLog This results in the following: Of course this is only showing one table if you have a lot of tables and need to know which ones are taking up the most space, it would be nice if you could run a query to list all of the tables, perhaps ordered by the space theyre taking up.  Thanks to Mitchel Sellers (and Gregg Starks CURSOR template) and a tiny bit of my own edits, now you can!  Create the stored procedure below and call it to see a listing of all user tables in your database, ordered by their reserved space. -- Lists Space Used for all user tablesCREATE PROCEDURE GetAllTableSizesASDECLARE @TableName VARCHAR(100)DECLARE tableCursor CURSOR FORWARD_ONLYFOR select [name]from dbo.sysobjects where OBJECTPROPERTY(id, N'IsUserTable') = 1FOR READ ONLYCREATE TABLE #TempTable( tableName varchar(100), numberofRows varchar(100), reservedSize varchar(50), dataSize varchar(50), indexSize varchar(50), unusedSize varchar(50))OPEN tableCursorWHILE (1=1)BEGIN FETCH NEXT FROM tableCursor INTO @TableName IF(@@FETCH_STATUS<>0) BREAK; INSERT #TempTable EXEC sp_spaceused @TableNameENDCLOSE tableCursorDEALLOCATE tableCursorUPDATE #TempTableSET reservedSize = REPLACE(reservedSize, ' KB', '')SELECT tableName 'Table Name',numberofRows 'Total Rows',reservedSize 'Reserved KB',dataSize 'Data Size',indexSize 'Index Size',unusedSize 'Unused Size'FROM #TempTableORDER BY CONVERT(bigint,reservedSize) DESCDROP TABLE #TempTableGO Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

  Read the article

• mix audio with h264 mp4 video with ffmpeg

  - by user2362912

  I have 2 files : Input #0, wav, from '105426_1.wav': Duration: 00:00:09.98, bitrate: 1312 kb/s Stream #0:0: Audio: pcm_s16le ([1][0][0][0] / 0x0001), 41000 Hz, stereo, s16, 1312 kb/s and: Duration: 00:00:41.29, start: 0.000000, bitrate: 1313 kb/s Stream #0:0(und): Video: h264 (Constrained Baseline) (avc1 / 0x31637661), yuv420p, 640x360 [SAR 1:1 DAR 16:9], 1211 kb/s, 24.42 fps, 25 tbr, 90k tbn, 48 tbc Metadata: handler_name : VideoHandler Stream #0:1(eng): Audio: aac (mp4a / 0x6134706D), 44100 Hz, stereo, fltp, 99 kb/s Metadata: handler_name : SoundHandler I want to insert first audio file into video in special place (for example in 10 secunde of video) and mix it with audio stream of video file. I try to /usr/local/bin/ffmpeg -i 105426_1.wav -i 105426.mp4 -map 0:0 -map 1:1 -map 1:0 video_finale.mp4 but result is : Duration: 00:00:41.31, start: 0.046440, bitrate: 755 kb/s Stream #0:0(und): Audio: aac (mp4a / 0x6134706D), 44100 Hz, stereo, fltp, 128 kb/s Metadata: handler_name : SoundHandler Stream #0:1(eng): Audio: aac (mp4a / 0x6134706D), 44100 Hz, stereo, fltp, 128 kb/s Metadata: handler_name : SoundHandler Stream #0:2(und): Video: h264 (High) (avc1 / 0x31637661), yuv420p, 640x360 [SAR 1:1 DAR 16:9], 588 kb/s, 25 fps, 25 tbr, 12800 tbn, 50 tbc Metadata: handler_name : VideoHandler I need only one audio stream and first stream play not from beginig but from 10 sec

  Read the article

• Working with Reporting Services Filters–Part 5: OR Logic

  - by smisner

  When you combine multiple filters, Reporting Services uses AND logic. Once upon a time, there was actually a drop-down list for selecting AND or OR between filters which was very confusing to people because often it was grayed out. Now that selection is gone, but no matter. It wouldn’t help us solve the problem that I want to describe today. As with many problems, Reporting Services gives us more than one way to apply OR logic in a filter. If I want a filter to include this value OR that value for the same field, one approach is to set up the filter is to use the IN operator as I explained in Part 1 of this series. But what if I want to base the filter on two different fields? I  need a different solution. Using the AdventureWorksDW2008R2 database, I have a report that lists product sales: Let’s say that I want to filter this report to show only products that are Bikes (a category) OR products for which sales were greater than $1,000 in a year. If I set up the filter like this: Expression Data Type Operator Value [Category] Text = Bikes [SalesAmount]   > 1000 Then AND logic is used which means that both conditions must be true. That’s not the result I want. Instead, I need to set up the filter like this: Expression Data Type Operator Value =Fields!EnglishProductCategoryName.Value = "Bikes" OR Fields!SalesAmount.Value > 1000 Boolean = =True The OR logic needs to be part of the expression so that it can return a Boolean value that we test against the Value. Notice that I have used =True rather than True for the value. The filtered report appears below. Any non-bike product appears only if the total sales exceed $1,000, whereas Bikes appear regardless of sales. (You can’t see it in this screenshot, but Mountain-400-W Silver, 38 has sales of $923 in 2007 but gets included because it is in the Bikes category.)

  Read the article

• Is realtime validation of username good or bad?

  - by iamserious

  I have a simple form for the user to sign up to my site; with email, username and password fields. We are now trying to implement an ajax validation so the user doesn't have to post the form to find out if the username is already taken. I can do this either on keyup event or on text blur event. My question is, which of these is really the best way to do? Keyup From the user POV, it would be good if the validation is done as and when they are typing, (on key up event) - of course, I am waiting for half a second to see if the user stops typing before firing off the request, and user can make any adjustments immediately. But this means I am sending way more requests than if I validated the username on Blur event. Blur The number of requests will be much lower when the validation is done on blur event, But this means the user has to actually go away from the textbox, look at the validation result, and if necessary go back to it to make any changes and repeat the whole process until he gets it right. I had a quick look at google, tumblr, twitter and no one actually does username validations on keyup events, (heck, tubmlr waits for the form to be posted) but I can swear I have seen keyup validations in a lot of places too. So, coming back to the question, will keyup validations be too many for server, is it an unnecessary overhead? or is it worth taking these hits to give user a better experience? ps: all my regex validations etc are already done on javascript and only when it passes all these other criteria does it send a request to server to check if a username already exists. (And the server is doing a select count(1) from user where username = '' - nothing substantial, but still enough to occupy some resource) pps: I'm on asp.net, MS SQL stack., if that matters.

  Read the article

• getting a 404/403 error for payment gateway

  - by Obay Ouano

  We are setting up an online payment facility using a payment gateway. After the payment gateway finishes processing the credit card details for a payment, the user is redirected to a "403 Forbidden" page. The logs show: [MY_IP_ADDRESS_HERE] - - [SOME_DATE_HERE] "GET /POSTBACK_URL.php?txnid=1338434567&result=failure&reason=The+remote+server+returned+an+error%3a+(404)+Not+Found.&digest=7a115270c56df5945c43ad86e56b2e930a3cfd50 HTTP/1.1" 404 - "PAYMENT_GATEWAY_URL_HERE" "BROWSER_DETAILS_HERE" It means that when the PAYMENT_GATEWAY_URL attempts to open our POSTBACK_URL, it gets a 404 error, is that correct? But why does the page say "403 Forbidden"? Anyway, we tried to copy-paste that same URL into the browser window, and the page is opened successfully, with our programmed error notification message. So, why couldn't it be opened when the payment gateway tried to redirect to it, but we could? Is this some sort of permissions issue? If so, the postback URL's file permissions are already 755. What am I missing?

  Read the article

• Old Lock Retrofitted for Wireless and Key-free Entry

  - by Jason Fitzpatrick

  What do you do if the old key your landlord gave you is poor fit for your apartment’s lock? If you’re the geeky sort, you build a wireless unlocking module to do the work for you. Instructables user Rybitski writes: The key to my apartment never worked quite right because it is a copy of a copy of a copy. I am fairly certain that the dead bolt is original to the building and the property manager seems to have lost the original key years ago. As a result unlocking the door was always a pain. Changing the lock wasn’t an option, but eliminating the need to use a key was. To that end, he built the device seen in the video above. An Arduino Uno drives a servo which in turn opens the deadbolt. The whole thing is controlled by a simple wireless key fob. Hit up the link below for the full build guide including code. Key Fob Deadbolt [via Hack A Day] How To Delete, Move, or Rename Locked Files in Windows HTG Explains: Why Screen Savers Are No Longer Necessary 6 Ways Windows 8 Is More Secure Than Windows 7

  Read the article

• The overlooked OUTPUT clause

  - by steveh99999

  I often find myself applying ad-hoc data updates to production systems – usually running scripts written by other people. One of my favourite features of SQL syntax is the OUTPUT clause – I find this is rarely used, and I often wonder if this is due to a lack of awareness of this feature.. The OUTPUT clause was added to SQL Server in the SQL 2005 release – so has been around for quite a while now, yet I often see scripts like this… SELECT somevalue FROM sometable WHERE keyval = XXX UPDATE sometable SET somevalue = newvalue WHERE keyval = XXX -- now check the update has worked… SELECT somevalue FROM sometable WHERE keyval = XXX This can be rewritten to achieve the same end-result using the OUTPUT clause. UPDATE sometable SET somevalue = newvalue OUTPUT deleted.somevalue AS ‘old value’,              inserted.somevalue AS ‘new value’ WHERE keyval = XXX The Update statement with output clause also requires less IO - ie I've replaced three SQL Statements with one, using only a third of the IO.  If you are not aware of the power of the output clause – I recommend you look at the output clause in books online And finally here’s an example of the output produced using the Northwind database…  

  Read the article

• Essbase - FormatString

  - by THE

  A look at the documentation for "Typed Measures" shows:"Using format strings, you can format the values (cell contents) of Essbase database members in numeric type measures so that they appear, for query purposes, as text, dates, or other types of predefined values. The resultant display value is the cell’s formatted value (FORMATTED_VALUE property in MDX). The underlying real value is numeric, and this value is unaffected by the associated formatted value."To actually switch ON the use of typed measures in general, you need to navigate to the outline properties: open outline select properties change "Typed Measures enable" to TRUE (click to enlarge) As an example, I created two additional members in the ASOSamp outline. - A member "delta Price" in the Measures (Accounts) Dimension with the Formula: ([Original Price],[Curr_year])-([Original Price],[Prev_year])This is equivalent to the Variance Formula used in the "Years" Dimension. - A member "Var_Quickview" in the "Years" Dimension with the same formula as the "Variance" Member.This will be used to simply display a second cell with the same underlying value as Variance - but formatted using Format String hence enabling BOTH in the same report. (click to enlarge) In the outline you now select the member you want the Format String associated with and change the "associated Format String" in the Member Properties.As you can see in this example an IIF statement reading:MdxFormat(IIF(CellValue()< 0,"Negative","Positive" ) ) has been chosen for both new members.After applying the Format String changes and running a report via SmartView, the result is: (click to enlarge) reference: Essbase Database Admin Guide ,Chapter 12 "Working with Typed Measures "

  Read the article

• API Class with intensive network requests

  - by Marco Acierno

  I'm working an API which works as "intermediary" between a REST API and the developer. In this way, when the programmer do something like this: User user = client.getUser(nickname); it will execute a network request to download from the service the data about the user and then the programmer can use the data by doing things like user.getLocation(); user.getDisplayName(); and so on. Now there are some methods like getFollowers() which execute another network request and i could do it in two ways: Download all the data in the getUser method (and not only the most important) but in this way the request time could be very long since it should execute the request to various urls Download the data when the user calls the method, it looks like the best way and to improve it i could cache the result so the next call to getFollowers returns immediately with the data already download instead of execute again the request. What is the best way? And i should let methods like getUser and getFollowers stop the code execution until the data is ready or i should implement a callback so when the data is ready the callback gets fired? (this looks like Javascript)

  Read the article

• Adding tolerance to a point in polygon test

  - by David Gouveia

  I've been using this method which was taken from Game Coding Complete to detect whether a point is inside of a polygon. It works in almost every case, but is failing on a few edge cases, and I can't figure out the reason. For example, given a polygon with vertices at (0,0) (0,100) and (100,100), the algorithm is returning: True for any point strictly inside the polygon False for any of the vertices False for (0, 50) which lies on one of the edges of the polygon True (?) for (50,50) which is also on one of the edges of the polygon I'd actually like to relax the algorithm so that it returns true in all of these cases. In other words, it should return true for points that are strictly inside, for the vertices themselves, and for points on the edges of the polygon. If possible I'd also like to give it enough tolerance so that it always tend towards "true" in face of floating point fluctuations. For example, I have another method, that given a line segment and a point, returns the closest location on the line segment to the given point. Currently, given any point outside the polygon and one of its edges, there are cases where the result is categorized as being inside by the method above, while other points are considered outside. I'd like to give it enough tolerance so that it always returns true in this situation. The way I've currently solved the problem is an hack, which consists of using an external library to inflate the polygon by a few pixels, and performing the tests on the inflated polygon, but I'd really like to replace this with a proper solution.

  Read the article

• How can I open a console application with a given window size?

  - by Oliver Salzburg

  The application I want to start is MongoDB. If I would start it normally, it looks like this: I don't like the amount of line breaks and I have a lot of screen space, so I would like to utilize said space to get rid of the line breaks. I can change the size of the console window with MODE, so I wrote a batch file like this: @ECHO OFF MODE con:cols=140 lines=70 %~dp0mongodb\bin\mongod --dbpath %~dp0data --rest So far, so good. When I start this batch file, I get a larger window, as desired. But when I now press Ctrl+C to exit MongoDB, I get the annoying prompt: Terminate batch job (Y/N)? Which is useless, because the command I just exited out of was the last command in the batch job anyway and no matter what I answer, the result is the same. So, how can I get a larger console window for the application without having that prompt when I hit Ctrl+C?

  Read the article

• How do you communicate improvements in tools and process to the development team?

  - by birryree

  Hi everyone, My team does a lot of internal tooling and infrastructure work - you can think of us as a small scale version of the teams Facebook, Etsy, Netflix, etc. who build all the infrastructure for scaling their services up to thousands/tens of thousands of servers and supporting millions of users. Lately, we've been running full steam ahead improving much of the tools we use internally, like tools for automatically creating new servers, setting up new application instances, etc. An end result of this has been decreased developer frustration, but increased 'ignorance' by most of the developer team about how to use our tools correctly and effectively. More often than not, my team will be asked by other teams to help them use the tools. Solutions we've thought up or things already in place: All our code is relatively simple and self-explanatory, with good comments where necessary, so developers could read the scripts. Counterargument: You can guess this isn't a particularly good idea, having people read our tools' code to figure out how to use it. All our code is committed to Subversion with very detailed commit messages about changes, developers could read the commit emails. Counterargument: Expect the developers to read all our commits? Ludicrous. Wiki - we have an internal company wiki, that we try to maintain with up to date information, but as we are moving so fast, the wiki has to keep pace as well. Counterargument: As mentioned, we move fast in my team, as more improvements on our tools are added daily. Again still relies on people to read something that might change constantly. Email the team? We could email the team when we have a glut of improvements to communicate. So as you can all see, we are trying to find new ideas, and explore options we haven't thought of yet. Anyone else ever been in a similar situation and have some guidance?

  Read the article

• Recursive Batch File

  - by MCZ

  I have a file that looks this: head1,head2,head3,head4,head5,head6 a11,a12,keyA,a14,a15,a16 a21,a22,keyB,a24,a25 a31,a32,keyC,a34 a41,a42,keyB,a44,a44 a51,a52,keyA,a54,a55,a56 a61,a62,keyA,a64,a65,a66 a71,a72,keyC,a74 some message Objective: Write list of unique keys to a text file. For example, the result for the file described above should be: keyA, keyB, keyC Here's the pseudocode I would like to implement in batch file recur.bat Read second line of inputfile If no key exist on second line, return else continue Append keyX to list FINDSTR /v keyX inputfile Pipe results to recur.bat I don't know if this is the most efficient way to do this without using actual programming language. Any suggestions for actual batch file code?

  Read the article

• Thoughts on type aliases/synonyms?

  - by Rei Miyasaka

  I'm going to try my best to frame this question in a way that doesn't result in a language war or list, because I think there could be a good, technical answer to this question. Different languages support type aliases to varying degrees. C# allows type aliases to be declared at the beginning of each code file, and they're valid only throughout that file. Languages like ML/Haskell use type aliases probably as much as they use type definitions. C/C++ are sort of a Wild West, with typedef and #define often being used seemingly interchangeably to alias types. The upsides of type aliasing don't invoke too much dispute: It makes it convenient to define composite types that are described naturally by the language, e.g. type Coordinate = float * float or type String = [Char]. Long names can be shortened: using DSBA = System.Diagnostics.DebuggerStepBoundaryAttribute. In languages like ML or Haskell, where function parameters often don't have names, type aliases provide a semblance of self-documentation. The downside is a bit more iffy: aliases can proliferate, making it difficult to read and understand code or to learn a platform. The Win32 API is a good example, with its DWORD = int and its HINSTANCE = HANDLE = void* and its LPHANDLE = HANDLE FAR* and such. In all of these cases it hardly makes any sense to distinguish between a HANDLE and a void pointer or a DWORD and an integer etc.. Setting aside the philosophical debate of whether a king should give complete freedom to their subjects and let them be responsible for themselves or whether they should have all of their questionable actions intervened, could there be a happy medium that would allow the benefits of type aliasing while mitigating the risk of its abuse? As an example, the issue of long names can be solved by good autocomplete features. Visual Studio 2010 for instance will alllow you to type DSBA in order to refer Intellisense to System.Diagnostics.DebuggerStepBoundaryAttribute. Could there be other features that would provide the other benefits of type aliasing more safely?

  Read the article

< Previous Page | 369 370 371 372 373 374 375 376 377 378 379 380  | Next Page >