Search Results

Search found 35444 results on 1418 pages for 'lock down computer'.

Page 374/1418 | < Previous Page | 370 371 372 373 374 375 376 377 378 379 380 381  | Next Page >

• Searching for the Perfect Developer&rsquo;s Laptop.

  - by mbcrump

  I have been in the market for a new computer for several months. I set out with a budget of around $1200. I knew up front that the machine would be used for developing applications and maybe some light gaming. I kept switching between buying a laptop or a desktop but the laptop won because: With a Laptop, I can carry it everywhere and with a desktop I can’t. I searched for about 2 weeks and narrowed it down to a list of must-have’s : i7 Processor (I wasn’t going to settle for an i5 or AMD. I wanted a true Quad-core machine, not 2 dual-core fused together). 15.6” monitor SSD 128GB or Larger. – It’s almost 2011 and I don’t want an old standard HDD in this machine. 8GB of DDR3 Ram. – The more the better, right? 1GB Video Card (Prefer NVidia) – I might want to play games with this. HDMI Port – Almost a standard on new Machines. This would be used when I am on the road and want to stream Netflix to the HDTV in the Hotel room. Webcam Built-in – This would be to video chat with the wife and kids if I am on the road. 6-Cell Battery. – I’ve read that an i7 in a laptop really kills the battery. A 6-cell or 9-cell is even better. That is a pretty long list for a budget of around $1200. I searched around the internet and could not buy this machine prebuilt for under $1200. That was even with coupons and my company’s 10% Dell discount. The only way that I would get a machine like this was to buy a prebuilt and replace parts. I chose the  Lenovo Y560 on Newegg to start as my base. Below is a top-down picture of it.   Part 1: The Hardware The Specs for this machine: Color :  GrayOperating System : Windows 7 Home Premium 64-bitCPU Type : Intel Core i7-740QM(1.73GHz)Screen : 15.6" WXGAMemory Size : 4GB DDR3Hard Disk : 500GBOptical Drive : DVD±R/RWGraphics Card : ATI Mobility Radeon HD 5730Video Memory : 1GBCommunication : Gigabit LAN and WLANCard slot : 1 x Express Card/34Battery Life : Up to 3.5 hoursDimensions : 15.20" x 10.00" x 0.80" - 1.30"Weight : 5.95 lbs. This computer met most of the requirements above except that it didn’t come with an SSD or have 8GB of DDR3 Memory. So, I needed to start shopping except this time for an SSD. I asked around on twitter and other hardware forums and everyone pointed me to the Crucial C300 SSD. After checking prices of the drive, it was going to cost an extra $275 bucks and I was going from a spacious 500GB drive to 128GB. After watching some of the SSD videos on YouTube I started feeling better. Below is a pic of the Crucial C300 SSD. The second thing that I needed to upgrade was the RAM. It came with 4GB of DDR3 RAM, but it was slow. I decided to buy the Crucial 8GB (4GB x 2) Kit from Newegg. This RAM cost an extra $120 and had a CAS Latency of 7. In the end this machine delivered everything that I wanted and it cost around $1300. You are probably saying, well your budget was $1200. I have spare parts that I’m planning on selling on eBay or Anandtech.  =) If you are interested then shoot me an email and I will give you a great deal mbcrump[at]gmail[dot]com. 500GB Laptop 7200RPM HDD 4GB of DDR3 RAM (2GB x 2) faceVision HD 720p Camera – Unopened In the end my Windows Experience Rating of the SSD was 7.7 and the CPU 7.1. The max that you can get is a 7.9. Part 2: The Software I’m very lucky that I get a lot of software for free. When choosing a laptop, the OS really doesn’t matter because I would never keep the bloatware pre-installed or Windows 7 Home Premium on my main development machine. Matter of fact, as soon as I got the laptop, I immediately took out the old HDD without booting into it. After I got the SSD into the machine, I installed Windows 7 Ultimate 64-Bit. The BIOS was out of date, so I updated that to the latest version and started downloading drivers off of Lenovo’s site. I had to download the Wireless Networking Drivers to a USB-Key before I could get my machine on my wireless network. I also discovered that if the date on your computer is off then you cannot join the Windows 7 Homegroup until you fix it. I’m aware that most people like peeking into what programs other software developers use and I went ahead and listed my “essentials” of a fresh build. I am a big Silverlight guy, so naturally some of the software listed below is specific to Silverlight. You should also check out my master list of Tools and Utilities for the .NET Developer. See a killer app that I’m missing? Feel free to leave it in the comments below. My Software Essential List. CPU-Z Dropbox Everything Search Tool Expression Encoder Update Expression Studio 4 Ultimate Foxit Reader Google Chrome Infragistics NetAdvantage Ultimate Edition Keepass Microsoft Office Professional Plus 2010 Microsoft Security Essentials 2  Mindscape Silverlight Elements Notepad 2 (with shell extension) Precode Code Snippet Manager RealVNC Reflector ReSharper v5.1.1753.4 Silverlight 4 Toolkit Silverlight Spy Snagit 10 SyncFusion Reporting Controls for Silverlight Telerik Silverlight RadControls TweetDeck Virtual Clone Drive Visual Studio 2010 Feature Pack 2 Visual Studio 2010 Ultimate VS KB2403277 Update to get Feature Pack 2 to work. Windows 7 Ultimate 64-Bit Windows Live Essentials 2011 Windows Live Writer Backup. Windows Phone Development Tools That is pretty much it, I have a new laptop and am happy with the purchase. If you have any questions then feel free to leave a comment below.  Subscribe to my feed

  Read the article

• Surface and the Uphill Battle to Win Over iPad Users (Namely: Me)

  - by D'Arcy Lussier

  I went away this past weekend and decided to bring along the Windows 8 tablet from the Build conference last year – y’know, to give Windows 8 a try in a typical scenario. I also brought our iPad 2 along since I figured my wife would want to use that. I’d love to tell you how I found using my Windows 8 tablet but I can’t – I used the iPad exclusively the entire weekend. It was during this that I realized what Microsoft needs to do to win me over as an iPad user. As you’ll see, I’m left wondering what it is that Surface is meant to compete with: iPad and other tablets, or thin laptops like the MacBook Air or Ultrabooks. Device Size I really like the size of the iPad compared with the Build tablet. It’s not as long and the thinness/weight of the device makes it feel more like you’re holding a magazine than a computer. I’m pleased that Microsoft will be matching the thinness of the iPad with Surface, but I’m suspect as to what that actually means. The iPad’s edges slant inwards where the Surface has a thicker boxish look (similar to the iPhone 4S). So while they may have the same depth at the deepest part of both devices, I bet the iPad will come off feeling thinner. However, its not lost on me the number of external port options the Surface’s design provides over the iPad (Usb, etc.). With that said, I haven’t missed having a USB slot on my iPad. I’m not a fan of lengthening the Surface screen size to almost a full inch over the iPad, mainly because… Vertical Orientation Experience Did you notice at the announce event, in the images of the devices that have been released, and in any marketing for it, that the surface is always displayed in horizontal orientation. This is a huge beef I have with my Build tablet and why I prefer the iPad. Yes the iPad can do the wide-screenish mode, but the iPad is oriented to be vertical by nature. Don’t agree? Look at the button and camera placement – both on the shorter sides of the device. Compare that with the Surface, where the orientation for the button and camera is on the longer sides. To be fair, Blackberry and the horde of Android tablets out there haven’t gotten this either – since most monitors are widescreen nowadays tablets should be too right? Wrong. Widescreen is great for certain things, but tasks such as reading is not one of them – hence why monitor companies like Dell provide stands that allow you to flip your widescreen monitor to a vertical orientation. That Microsoft has chosen a horizontal orientation by default for Windows 8 is disappointing – hopefully hardware manufacturers will be given the option of a default vertical orientation. Fast Startup Time I like that I can turn off/turn on the iPad very quickly. Even from a true “off” mode and not just sleeping, the iPad boots up very quickly. Windows RT needs to have that same quick response. If I start finding that I’m waiting for the device to boot up for more than 30 seconds that could be a show stopper. No Heat I really hate that the Build tablet has fans that kick in to cool the procs, but its basically a slate computer and I get its part of that prototype build. For Surface, it needs to be the same type of experience as the iPad – no heat! I know Surface doesn’t have fans and uses some cool new vent system or something like that, but even then – I want to sit and read a book on my Surface without having to feel any heat coming from the device, which is the experience I have with the iPad now. What About Apps?! I am definitely not the target client when it comes to app stores. On my iPad I use: Safari Kindle Reader Twitter App Settlers of Catan TSN’s App And that’s it. So really, while its nice that some version of Office might be available, I’m not planning on utilizing a Surface for creating a PowerPoint or working on a Word document – that’s what my laptop is for. I want my tablet to be for information snacking or as an e-reader and occasionally an entertainment device. Surface vs iPad or Surface vs Air? The more that I read up on Surface, the more I wonder if it won’t be a touch-enabled MacBook Air competitor more than an iPad one. Also, I really question if Microsoft gets tablets – when one of your main selling features is a built-in physical keyboard it speaks more to a traditional laptop experience than a tablet one that’s entirely reliant on touch. Still, I really love the Windows Phone interface – way more than iOS – so I’m still very optimistic that the Metro experience on the tablet will be fantastic. I just worry that Microsoft has interpreted a tablet as a computer with a removable keyboard and a touch screen, and that’s not what tablet computing is about at all.

  Read the article

• SUPINFO International University in Mauritius

  Since a while I'm considering to pick up my activities as a student and I'd like to get a degree in Computer Science. Personal motivation I mean after all this years as a professional software (and database) developer I have the personal urge to complete this part of my education. Having various certifications by Microsoft and being awarded as an Microsoft Most Valuable Professional (MVP) twice looks pretty awesome on a resume but having a "proper" degree would just complete my package. During the last couple of years I already got in touch with C-SAC (local business school with degree courses), the University of Mauritius and BCS, the Chartered Institute for IT to check the options to enroll as an experienced software developer. Quite frankly, it was kind of alienating to receive that feedback: Start from scratch! No seriously? Spending x amount of years to sit for courses that might be outdated and form part of your daily routine? Probably being in an awkward situation in which your professional expertise might exceed the lecturers knowledge? I don't know... but if that's path to walk... Well, then I might have to go for it. SUPINFO International University Some weeks ago I was contacted by the General Manager, Education Recruitment and Development of Medine Education Village, Yamal Matabudul, to have a chat on how the local IT scene, namely the Mauritius Software Craftsmanship Community (MSCC), could assist in their plans to promote their upcoming campus. Medine went into partnership with the French-based SUPINFO International University and Mauritius will be the 36th location world-wide for SUPINFO. Actually, the concept of SUPINFO is very likely to the common understanding of an apprenticeship in Germany. Not only does a student enroll into the programme but will also be placed into various internships as part of the curriculum. It's a big advantage in my opinion as the person stays in touch with the daily procedures and workflows in the real world of IT. Statements like "We just received a 'crash course' of information and learned new technology which is equivalent to 1.5 months of lectures at the university" wouldn't form part of the experience of such an education. Open Day at the Medine Education Village Last Saturday, Medine organised their Open Day and it was the official inauguration of the SUPINFO campus in Mauritius. It's now listed on their website, too - but be warned, the site is mainly in French language although the courses are all done in English. Not only was it a big opportunity to "hang out" on the campus of Medine but it was great to see the first professional partners for their internship programme, too. Oh, just for the records, IOS Indian Ocean Software Ltd. will also be among the future employers for SUPINFO students. More about that in an upcoming blog entry. Open Day at Medine Education Village - SUPINFO International University in Mauritius Mr Alick Mouriesse, President of SUPINFO, arrived the previous day and he gave all attendees a great overview of the roots of SUPINFO, the general development of the educational syllabus and their high emphasis on their partnerships with local IT companies in order to assist their students to get future jobs but also feel the heartbeat of technology live. Something which is completely missing in classic institutions of tertiary education in Computer Science. And since I was on tour with my children, as usual during weekends, he also talked about the outlook of having a SUPINFO campus in Mauritius. Apart from the close connection to IT companies and providing internships to students, SUPINFO clearly works on an international level. Meaning students of SUPINFO can move around the globe and can continue their studies seamlessly. For example, you might enroll for your first year in France, then continue to do 2nd and 3rd year in Canada or any other country with a SUPINFO campus to earn your bachelor degree, and then live and study in Mauritius for the next 2 years to achieve a Master degree. Having a chat with Dale Smith, Expand Technologies, after his interesting session on Technological Entrepreneurship - TechPreneur More questions by other craftsmen of the Mauritius Software Craftsmanship Community And of course, this concept works in any direction, giving Mauritian students a huge (!) opportunity to live, study and work abroad. And thanks to this, Medine already announced that there will be new facilities near Cascavelle to provide dormitories and other facilities to international students coming to our island. Awesome! Okay, but why SUPINFO? Well, coming back to my original statement - I'd like to get a degree in Computer Science - SUPINFO has a process called Validation of Acquired Experience (VAE) which is tailor-made for employees in the field of IT, and allows you to enroll in their course programme. I already got in touch with their online support chat but was only redirected to some FAQs on their website, unfortunately. So, during the Open Day I seized the opportunity to have an one-on-one conversation with Alick Mouriesse, and he clearly encouraged me to gather my certifications and working experience. SUPINFO does an individual evaluation prior to their assignment regarding course level, and hopefully my chances of getting some modules ahead of studies are looking better than compared to the other institutes. Don't get me wrong, I don't want to go down the easy route but why should someone sit for "Database 101" or "Principles of OOP" when applying and preaching database normalisation and practicing Clean Code Developer are like flesh and blood? Anyway, I'll be off to get my transcripts of certificates together with my course assignments from the old days at the university. Yes, I studied Applied Chemistry for a couple of years before intersecting into IT and software development particularly... ;-)

  Read the article

• Can't connect to Wired Network after installing 12.04

  - by ezz9

  I have installed 12.04 into a used HP Compaq DC 7100 CMT. Plugged in LAN cable into the computer and it says network disconnected. from what I understand on the things I've read, it's not getting the address right, maybe it's just a guess (hardware address 00:16:35:78:47:bb). I know the LAN cable is working I can get on the net with the old computer. (Old computer is using device MAC address; Auto eth0 00:11:11:E6:4F:FE). I have put this address into the newer HP and it shows last used (minutes ago) but no Internet sever not found. I tried the hardware address it says never. I feel and think this should be easy to fix. But I just don't know. Here is the info everyone has asked for, but they never say what I should do. sudo lshw -C network; rfkill list; cat /etc/network/interfaces; cat /etc/lsb-release; lspci -nn; lsusb; uname -a; ifconfig; route -n *-network description: ethernet interface product; NetXtreme BCM5751 Gigabit Ethernet PCI Express vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:40:00.0 logical name: eth0 verson: 01 serial: 00:16:35:78:47:bb size: 100Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm vpd msi pciexpress bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000-fd configuration: autonegotiation=on broadcast=yes driver=tg3 driverversion= 3.121 duplex=full firmware=5751-v3.29a latency=0 link=yes multicast=yes port=twi sted pair speed=100Mbit/s resources: irq:17 memory:f0400000-f040ffff auto lo iface lo inet loopback DISTRIB_ID=Ubuntu DISTRIB_RELEASE=12.04 DISTRIB_CODENAME=precise DISTRIB_DESCRIPTION= "Ubuntu 12.04 LTS" 00:00.0 host bridge [0600]: Inter Corporation 82915G/P/GV/GL/PL/910GL Memory Con troller Hub [8086:2580] (rev 04) 00.02.0 VGA compatible controller [0300]: Intel Corporation 82915G/GV/910GL inte grated Graphics Controller [8086:2582] (rev 04) 00:1c.0 PCI bridge [0604]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 1 [8086:2660] (rev 03) 00:1c.1 PCI bridge [0604]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 2 [8086:2662] (rev 03) 00:1d.0 USB controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Fam ily) USB UHCI #1 [8086:2658] (rev 03) 00:1d.1 USB controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Fam ily) USB UHCI #2 [8086:2659] (rev 03) 00:1d.2 USB controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Fam ily) USB UHCI #3 [8086:265a] (rev 03) 00:1d.3 USB controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Fam ily) USB UHCI #4 [8086:265b] (rev 03) 00:1d.7 USB controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Fam ily) USB2 UHCI Controller [8086:265c] (rev 03) 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI bridge [8086:244e] (rev d 3) 00:1e.2 Multimedia audio controller [0401]: Intel Corporation 82801FB/FBM/FR/FW/ FRW (ICH6 Family) AC'97 Autio conrtroller [8086:266e] (rev 03) 00:1f.0 ISA bridge [0601]: Intel Corporation 82801FB/RF (ICH6/ICH6R) LPC Interfa ce Bridge [8086:2640] (rev 03) 00:1f.1 IDE interface [0101]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 fami ly) IDE Controller [8086:266f] (rev 03) 00:1f.2 IDE interface [0101]: Intel Corporation 82801FB/FW (ICH6/ICH6W) SATA Con troller [8086:2651] (rev 03) 40:00.0 Ethernet controller [0200]: Broadcom Corporation NetXreme BCM5751 Gigab it Ethernet PCI Express [14e4:1677} (rev 01) Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Linux bob-desktop 3.2.0-23-generic-pae #36-Ubuntu SMP Tpr 10 22:19:09 UTC 20 12 i686 i686 i386 GNU/Linux eth0 Link encap:Ethernet HWaddr 00:16:35:78:47:bb inet6 addr: fe80::216:35ff:47bb/64 Scope:link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:2517 errors:0 dropped:0 overruns:0 frame:0 TX packets:164 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:164508 (164.5 KB) TX bytes: 40884 (40.0 KB) Interrupt:17 lo Link encap:Local loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:3290 errors:0 dropped:0 overruns:0 frame:0 TX packets:3290 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen: 0 RX bytes:267212 (267.2 KB) TX bytes: 267212 (267.2 KB) Kernel Ip routing table Destination Gateway Genmask Flags Metric Ref Use Iface ran this sudo dhclient eth0 no reply ran this ip addr 1: lo <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eth0: <BROADCAST ,MULTICAST ,UP ,LOWER_UP> mtu 1500 qdisc mq state UP qlen 1000 link/enter 00:16:35:78:47:BB brd ff:ff:ff:ff:ff:ff inet 169.254.7.172/16 brd 169.254.255.255 scope link eth0:avahi inet6 fe80::216:35ff:fe78:47bb/64 scope link valid_lft forever preferred_lft forever Help please.

  Read the article

• Stand-Up Desk 2012 Update

  - by BuckWoody

  One of the more popular topics here on my technical blog doesn't have to do with technology, per-se - it's about the choice I made to go to a stand-up desk work environment. If you're interested in the history of those, check here: Stand-Up Desk Part One Stand-Up Desk Part Two I have made some changes and I was asked to post those here.Yes, I'm still standing - I think the experiment has worked well, so I'm continuing to work this way. I've become so used to it that I notice when I sit for a long time. If I'm flying, or driving a long way, or have long meetings, I take breaks to stand up and move around. That being said, I don't stand as much as I did. I started out by standing the entire day - which did not end well. As you can read in my second post, I found that sitting down for a few minutes each hour worked out much better. And over time I would say that I now stand about 70-80% of the day, depending on the day. Some days I don't even notice I'm standing, so I don't sit as often. Other days I find that I really tire quickly - so I sit more often. But in both cases, I stand more than I sit. In the first post you can read about how I used a simple coffee-table from Ikea to elevate my desktop to the right height. I then adjusted the height where I stand by using a small plastic square and some carpet. Over time I found this did not work as well as I'd like. The primary reason is that the front of these are at the same depth - so my knees would hit the desk or table when I sat down. Also, the desk was at a certain height, and I had to adjust, rather than the other way around.  Also, I like a lot of surface area on top of a desk - almost more of a table. Routing cables and wiring was a pain, and of course moving it was out of the question.   So I've changed what I use. I found a perfect solution for what I was looking for - industrial wire shelving: I bought one, built only half of it (for the right height I wanted) and arranged the shelves the way I wanted. I then got a 5'x4' piece of wood from Lowes, and mounted it to where the top was balanced, but had an over-hang  I could get my knees under easily.My wife sewed a piece of fake-leather for the top. This arrangement provides the following benefits: Very strong Rolls easily, wheels can lock to prevent rolling Long, wide shelves Wire-frame allows me to route any kind of wiring and other things all over the desk I plugged in my UPS and ran it's longer power-cable to the wall outlet. I then ran the router's LAN connection along that wire, and covered both with a large insulation sleeve. I then plugged in everything to the UPS, and routed all the wiring. I can now roll the desk almost anywhere in the room so that I can record, look out the window, get closer to or farther away from the door and more. I put a few boxes on the shelves as "drawers" and tidied that part up. Even my printer fits on a shelf. Laser-dog not included - some assembly required In the second post you can read about the bar-stool I purchased from Target for the desk. I cheaped-out on this one, and it proved to be a bad choice. Because I had to raise it so high, and was constantly sitting on it and then standing up, the gas-cylinder in it just gave out. So it became a very short stool that I ended up getting rid of. In the end, this one from Ikea proved to be a better choice: And so this arrangement is working out perfectly. I'm finding myself VERY productive this way. I hope these posts help you if you decide to try working at a stand-up desk. Although I was skeptical at first, I've found it to be a very healthy, easy way to code, design and especially present over a web-cam. It's natural to stand to speak when you're presenting, and it feels more energetic than sitting down to talk to others.

  Read the article

• Manage Your Amazon S3 Account with CloudBerry Explorer

  - by Mysticgeek

  If you have an Amazon S3 account you’re using to backup your data, you might want an easy way to manage it. CloudBerry Explorer is a free app that runs on your desktop an provides an easy way to manage your S3 account. Installation and Setup Just download and install the application with the defaults. When the application launches you’ll be prompted to enter in your username and email to get a registration key. Or you can continue on by clicking Register later. Now you will want to set up your Amazon S3 account. Click on File \ Amazon S3 Accounts. Double-click on the New Account icon.   Next enter in your Amazon account Access and Secret keys, select SSL if you want, then click the Test Connection button. Provided everything was entered correctly, you’ll see the Connection Success screen, just close out of it. Browse and Manage files Once you have your account setup through the Explorer, you can start viewing and managing your files on S3. The left pane shows your S3 buckets and stored files, while the right side shows your local computer. This allows you to manage your files in your Amazon S3 buckets directly from your desktop! It’s very easy to use, and you can drag and drop files from your computer to the S3 account or vice versa. There is also the ability to transfer files between Amazon S3 accounts from within the explorer. Go into Tools and Content Types and you can control the file types by adding, removing, or editing them. If you end up messing something up along the lines, you can always select Reset to defaults and everything will be back to normal. There is a multiple tabbed view so you can easily keep track of your different accounts and local machine. It allows the ability to create new storage buckets directly in the Explorer. Or you can delete buckets as well… Different actions can be accessed from the toolbars or by right-clicking and selecting from the context menu. Here we see a cool option that lets you move your data inside Amazon S3. It is faster and doesn’t cost money by moving the files to your computer first, then to another account. However, if you want data moved to your local machine first, you have that option as well.   Not all features are available in the free version, and if it’s not, you’ll be prompted to purchase a license for the Pro version. We will have a comprehensive review of the Pro version in the near future.    If you ever need help with CloudBerry Explorer, go to Tools \ Diagnostics. It will run a quick diagnostics check and you can send the information to the CloudBerry team for assistance. Delete Files from Amazon S3 To delete a file from you Amazon S3 account, simply highlight the files or folder you want to get rid of then click Delete on the toolbar. You can also right-click the file and select Delete from the Context Menu. Click Yes to the confirmation dialog box… Then you can watch the progress as your files are deleted in the bottom section of the explorer. Conclusion CloudBerry Explorer free version has several neat features that will allow you easy and basic control over you Amazon S3 account. The free version may be enough for basic users, but power users will want to upgrade to the pro version, as it includes a lot more features. Using the free version allows you to get a feel for what CloudBerry Explorer has to offer, and is a good starting point. Keep in mind that Amazon S3 is introducing Reduced Redundancy Storage which will lower the price of data stored. The price drops from $0.15 per GB to only $0.10 per GB. If you’re a Windows Home Server user, check out our review of CloudBerry Online Backup 1.5 for WHS. Download CloudBerry Explorer Free for Amazon S3 Similar Articles Productive Geek Tips CloudBerry Online Backup 1.5 for Windows Home ServerReopen Closed Tabs in Internet ExplorerPreview and Purchase Ebooks with Kindle for PCTroubleshoot and Manage Addons in Internet Explorer 8Beginner Geek: Delete User Accounts in Windows 7 TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips All My Movies 5.9 CloudBerry Online Backup 1.5 for Windows Home Server Snagit 10 VMware Workstation 7 Google TV The iPod Revolution Ultimate Boot CD can help when disaster strikes Windows Firewall with Advanced Security – How To Guides Sculptris 1.0, 3D Drawing app AceStock, a Tiny Desktop Quote Monitor

  Read the article

• Adding a Network Loopback Adapter to Windows 8

  - by Greg Low

  I have to say that I continue to be frustrated with finding out how to do things in Windows 8. Here's another one and it's recorded so it might help someone else. I've also documented what I tried so that if anyone from the product group ever reads this, they'll understand how I searched for it and might try to make it easier.I wanted to add a network loopback adapter, to have a fixed IP address to work with when using an "internal" network with Hyper-V. (The fact that I even need to do this is also painful. I don't know why Hyper-V can't make it easy to work with host system folders, etc. as easily as I can with VirtualPC, VirtualBox, etc. but that's a topic for another day).In the end, what I needed was a known IP address on the same network that my guest OS was using, via the internal network (which allows connectivity from the host OS to/from guest OS's).I started by looking in the network adapters areas but there is no "add" functionality there. Realising that this was likely to be another unexpected challenge, I resorted to searching for info on doing this. I found KB article 2777200 entitled "Installing the Microsoft Loopback Adapter in Windows 8 and Windows Server 2012". Aha, I thought that's what I'd need. It describes the symptom as "You are trying to install the Microsoft Loopback Adapter, but are unable to find it." and that certainly sounded like me. There's a certain irony in documenting that something's hard to find instead of making it easier to find. Anyway, you'd hope that in that article, they'd then provide a step by step example of how to do it, but what they supply is this: The Microsoft Loopback Adapter was renamed in Windows 8 and Windows Server 2012. The new name is "Microsoft KM-TEST Loopback Adapter". When using the Add Hardware Wizard to manually add a network adapter, choose Manufacturer "Microsoft" and choose network adapter "Microsoft KM-TEST Loopback Adapter".The trick with this of course is finding the "Add Hardware Wizard". In Control Panel -> Hardware and Sound, there are options to "Add a device" and for "Device Manager". I tried the "Add a device" wizard (seemed logical to me) but after that wizard tries it's best, it just tells you that there isn't any hardware that it thinks it needs to install. It offers a link for when you can't find what you're looking for, but that leads to a generic help page that tells you how to do things like turning on your printer.In Device Manager, I checked the options in the program menus, and nothing useful was present. I even tried right-clicking "Network adapters", hoping that would lead to an option to add one, also to no avail.So back to the search engine I went, to try to find out where the "Add Hardware Wizard" is. Turns out I was in the right place in Device Manager, but I needed to right-click the computer's name, and choose "Add Legacy Hardware". No doubt that hasn't changed location lately but it's a while since I needed to add one so I'd forgotten. Regardless, I'm left wondering why it couldn't be in the menu as well.Anyway, for a step by step list, you need to do the following:1. From Control Panel, select "Device Manager" under the "Devices and Printers" section of the "Hardware and Sound" tab.2. Right-click the name of the computer at the top of the tree, and choose "Add Legacy Hardware".3. In the "Welcome to the Add Hardware Wizard" window, click Next.4. In the "The wizard can help you install other hardware" window, choose "Install the hardware that I manually select from a list" option and click Next.5. In the "The wizard did not find any new hardware on your computer" window, click Next.6. In the "From the list below, select the type of hardware you are installing" window, select "Network Adapters" from the list, and click Next.7. In the "Select Network Adapter" window, from the Manufacturer list, choose Microsoft, then in the Network Adapter window, choose "Microsoft KM-TEST Loopback Adapter", then click Next.8. In the "The wizard is ready to install your hardware" window, click Next.9. In the "Completing the Add Hardware Wizard" window, click Finish.Then you need to continue to set the IP address, etc.10. Back in Control Panel, select the "Network and Internet" tab, click "View Network Status and Tasks".11. In the "View your basic network information and set up connections" window, click "Change adapter settings".12. Right-click the new adapter that has been added (find it in the list by checking the device name of "Microsoft KM-TEST Loopback Adapter"), and click Properties.   

  Read the article

• The JavaOne 2012 Sunday Technical Keynote

  - by Janice J. Heiss

  At the JavaOne 2012 Sunday Technical Keynote, held at the Masonic Auditorium, Mark Reinhold, Chief Architect, Java Platform Group, stated that they were going to do things a bit differently--"rather than 20 minutes of SE, and 20 minutes of FX, and 20 minutes of EE, we're going to mix it up a little," he said. "For much of it, we're going to be showing a single application, to show off some of the great work that's been done in the last year, and how Java can scale well--from the cloud all the way down to some very small embedded devices, and how JavaFX scales right along with it."Richard Bair and Jasper Potts from the JavaFX team demonstrated a JavaOne schedule builder application with impressive navigation, animation, pop-overs, and transitions. They noted that the application runs seamlessly on either Windows or Macs, running Java 7. They then ran the same application on an Ubuntu Linux machine--"it just works," said Blair.The JavaFX duo next put the recently released JavaFX Scene Builder through its paces -- dragging and dropping various image assets to build the application's UI, then fine tuning a CSS file for the finished look and feel. Among many other new features, in the past six months, JavaFX has released support for H.264 and HTTP live streaming, "so you can get all the real media playing inside your JavaFX application," said Bair. And in their developer preview builds of JavaFX 8, they've now split the rendering thread from the UI thread, to better take advantage of multi-core architectures.Next, Brian Goetz, Java Language Architect, explored language and library features planned for Java SE 8, including Lambda expressions and better parallel libraries. These feature changes both simplify code and free-up libraries to more effectively use parallelism. "It's currently still a lot of work to convert an application from serial to parallel," noted Goetz.Reinhold had previously boasted of Java scaling down to "small embedded devices," so Blair and Potts next ran their schedule builder application on a small embedded PandaBoard system with an OMAP4 chip set. Connected to a touch screen, the embedded board ran the same JavaFX application previously seen on the desktop systems, but now running on Java SE Embedded. (The systems can be seen and tried at four of the nearby JavaOne hotels.) Bob Vandette, Java Embedded Architect, then displayed a $25 Rasberry Pi ARM-based system running Java SE Embedded, noting the even greater need for the platform independence of Java in such highly varied embedded processor spaces. Reinhold and Vandetta discussed Project Jigsaw, the planned modularization of the Java SE platform, and its deferral from the Java 8 release to Java 9. Reinhold demonstrated the promise of Jigsaw by running a modularized demo version of the earlier schedule builder application on the resource constrained Rasberry Pi system--although the demo gods were not smiling down, and the application ultimately crashed.Reinhold urged developers to become involved in the Java 8 development process--getting the weekly builds, trying out their current code, and trying out the new features:http://openjdk.java.net/projects/jdk8http://openjdk.java.net/projects/jdk8/spechttp://jdk8.java.netFrom there, Arun Gupta explored Java EE. The primary themes of Java EE 7, Gupta stated, will be greater productivity, and HTML 5 functionality (WebSocket, JSON, and HTML 5 forms). Part of the planned productivity increase of the release will come from a reduction in writing boilerplate code--through the widespread use of dependency injection in the platform, along with default data sources and default connection factories. Gupta noted the inclusion of JAX-RS in the web profile, the changes and improvements found in JMS 2.0, as well as enhancements to Java EE 7 in terms of JPA 2.1 and EJB 3.2. GlassFish 4 is the reference implementation of Java EE 7, and currently includes WebSocket, JSON, JAX-RS 2.0, JMS 2.0, and more. The final release is targeted for Q2, 2013. Looking forward to Java EE 8, Gupta explored how the platform will provide multi-tenancy for applications, modularity based on Jigsaw, and cloud architecture. Meanwhile, Project Avatar is the group's incubator project for designing an end-to-end framework for building HTML 5 applications. Santiago Pericas-Geertsen joined Gupta to demonstrate their "Angry Bids" auction/live-bid/chat application using many of the enhancements of Java EE 7, along with an Avatar HTML 5 infrastructure, and running on the GlassFish reference implementation.Finally, Gupta covered Project Easel, an advanced tooling capability in NetBeans for HTML5. John Ceccarelli, NetBeans Engineering Director, joined Gupta to demonstrate creating an HTML 5 project from within NetBeans--formatting the project for both desktop and smartphone implementations. Ceccarelli noted that NetBeans 7.3 beta will be released later this week, and will include support for creating such HTML 5 project types. Gupta directed conference attendees to: http://glassfish.org/javaone2012 for everything about Java EE and GlassFish at JavaOne 2012.

  Read the article

• Collision Detection, player correction

  - by DoomStone

  I am having some problems with collision detection, I have 2 types of objects excluding the player. Tiles and what I call MapObjects. The tiles are all 16x16, where the MapObjects can be any size, but in my case they are all 16x16. When my player runs along the mapobjects or tiles, it get verry jaggy. The player is unable to move right, and will get warped forward when moving left. I have found the problem, and that is my collision detection will move the player left/right if colliding the object from the side, and up/down if collision from up/down. Now imagine that my player is sitting on 2 tiles, at (10,12) and (11,12), and the player is mostly standing on the (11,12) tile. The collision detection will first run on then (10,12) tile, it calculates the collision depth, and finds that is is a collision from the side, and therefore move the object to the right. After, it will do the collision detection with (11,12) and it will move the character up. So the player will not fall down, but are unable to move right. And when moving left, the same problem will make the player warp forward. This problem have been bugging me for a few days now, and I just can't find a solution! Here is my code that does the collision detection. public void ApplyObjectCollision(IPhysicsObject obj, List<IComponent> mapObjects, TileMap map) { PhysicsVariables physicsVars = GetPhysicsVariables(); Rectangle bounds = ((IComponent)obj).GetBound(); int leftTile = (int)Math.Floor((float)bounds.Left / map.GetTileSize()); int rightTile = (int)Math.Ceiling(((float)bounds.Right / map.GetTileSize())) - 1; int topTile = (int)Math.Floor((float)bounds.Top / map.GetTileSize()); int bottomTile = (int)Math.Ceiling(((float)bounds.Bottom / map.GetTileSize())) - 1; // Reset flag to search for ground collision. obj.IsOnGround = false; // For each potentially colliding tile, for (int y = topTile; y <= bottomTile; ++y) { for (int x = leftTile; x <= rightTile; ++x) { IComponent tile = map.Get(x, y); if (tile != null) { bounds = HandelCollision(obj, tile, bounds, physicsVars); } } } // Handel collision for all Moving objects foreach (IComponent mo in mapObjects) { if (mo == obj) continue; if (mo.GetBound().Intersects(((IComponent)obj).GetBound())) { bounds = HandelCollision(obj, mo, bounds, physicsVars); } } } private Rectangle HandelCollision(IPhysicsObject obj, IComponent objb, Rectangle bounds, PhysicsVaraibales physicsVars) { // If this tile is collidable, SpriteCollision collision = ((IComponent)objb).GetCollisionType(); if (collision != SpriteCollision.Passable) { // Determine collision depth (with direction) and magnitude. Rectangle tileBounds = ((IComponent)objb).GetBound(); Vector2 depth = bounds.GetIntersectionDepth(tileBounds); if (depth != Vector2.Zero) { float absDepthX = Math.Abs(depth.X); float absDepthY = Math.Abs(depth.Y); // Resolve the collision along the shallow axis. if (absDepthY <= absDepthX || collision == SpriteCollision.Platform) { // If we crossed the top of a tile, we are on the ground. if (obj.PreviousBound.Bottom <= tileBounds.Top) obj.IsOnGround = true; // Ignore platforms, unless we are on the ground. if (collision == SpriteCollision.Impassable || obj.IsOnGround) { // Resolve the collision along the Y axis. ((IComponent)obj).Position = new Vector2(((IComponent)obj).Position.X, ((IComponent)obj).Position.Y + depth.Y); // If we hit something about us, remove all velosity upwards if (depth.Y > 0 && obj.IsJumping) { obj.Velocity = new Vector2(obj.Velocity.X, 0); obj.JumpTime = physicsVars.MaxJumpTime; } // Perform further collisions with the new bounds. return ((IComponent)obj).GetBound(); } } else if (collision == SpriteCollision.Impassable) // Ignore platforms. { // Resolve the collision along the X axis. ((IComponent)obj).Position = new Vector2(((IComponent)obj).Position.X + depth.X, ((IComponent)obj).Position.Y); // Perform further collisions with the new bounds. return ((IComponent)obj).GetBound(); } } } return bounds; } Update: I have uploaded the source code, if you want to look that through. I think that my general approach might be wrong when i am working with small tiles, I have also be unable to find any good information on physics and collision detection in Platform games. http://dl.dropbox.com/u/3181816/Sogaard.Games.SuperMario.rar

  Read the article

• Odd company release cycle: Go Distributed Source Control?

  - by MrLane

  sorry about this long post, but I think it is worth it! I have just started with a small .NET shop that operates quite a bit differently to other places that I have worked. Unlike any of my previous positions, the software written here is targetted at multiple customers and not every customer gets the latest release of the software at the same time. As such, there is no "current production version." When a customer does get an update, they also get all of the features added to he software since their last update, which could be a long time ago. The software is highly configurable and features can be turned on and off: so called "feature toggles." Release cycles are very tight here, in fact they are not on a shedule: when a feature is complete the software is deployed to the relevant customer. The team only last year moved from Visual Source Safe to Team Foundation Server. The problem is they still use TFS as if it were VSS and enforce Checkout locks on a single code branch. Whenever a bug fix gets put out into the field (even for a single customer) they simply build whatever is in TFS, test the bug was fixed and deploy to the customer! (Myself coming from a pharma and medical devices software background this is unbeliveable!). The result is that half baked dev code gets put into production without being even tested. Bugs are always slipping into release builds, but often a customer who just got a build will not see these bugs if they don't use the feature the bug is in. The director knows this is a problem as the company is starting to grow all of a sudden with some big clients coming on board and more smaller ones. I have been asked to look at source control options in order to eliminate deploying of buggy or unfinished code but to not sacrifice the somewhat asyncronous nature of the teams releases. I have used VSS, TFS, SVN and Bazaar in my career, but TFS is where most of my experience has been. Previously most teams I have worked with use a two or three branch solution of Dev-Test-Prod, where for a month developers work directly in Dev and then changes are merged to Test then Prod, or promoted "when its done" rather than on a fixed cycle. Automated builds were used, using either Cruise Control or Team Build. In my previous job Bazaar was used sitting on top of SVN: devs worked in their own small feature branches then pushed their changes to SVN (which was tied into TeamCity). This was nice in that it was easy to isolate changes and share them with other peoples branches. With both of these models there was a central dev and prod (and sometimes test) branch through which code was pushed (and labels were used to mark builds in prod from which releases were made...and these were made into branches for bug fixes to releases and merged back to dev). This doesn't really suit the way of working here, however: there is no order to when various features will be released, they get pushed when they are complete. With this requirement the "continuous integration" approach as I see it breaks down. To get a new feature out with continuous integration it has to be pushed via dev-test-prod and that will capture any unfinished work in dev. I am thinking that to overcome this we should go down a heavily feature branched model with NO dev-test-prod branches, rather the source should exist as a series of feature branches which when development work is complete are locked, tested, fixed, locked, tested and then released. Other feature branches can grab changes from other branches when they need/want, so eventually all changes get absorbed into everyone elses. This fits very much down a pure Bazaar model from what I experienced at my last job. As flexible as this sounds it just seems odd to not have a dev trunk or prod branch somewhere, and I am worried about branches forking never to re-integrate, or small late changes made that never get pulled across to other branches and developers complaining about merge disasters... What are peoples thoughts on this? A second final question: I am somewhat confused about the exact definition of distributed source control: some people seem to suggest it is about just not having a central repository like TFS or SVN, some say it is about being disconnected (SVN is 90% disconnected and TFS has a perfectly functional offline mode) and others say it is about Feature Branching and ease of merging between branches with no parent-child relationship (TFS also has baseless merging!). Perhaps this is a second question!

  Read the article

• Unable to keep the connecting using a wireless bridge

  - by dan

  I am running Ubuntu 12.04 on a dell inspiron desktop (core 2 duo) and am using wicd to manage my network/wifi. I've found that the WiFi card in the machine has trouble staying connected to my router (I believe this is a function of distance between the two), so I've taken an old Belkin F5d7231 wireless router and installed dd-wrt on it to use as a wireless bridge hoping that it will have better reception. I think everything up through the wireless bridge is working OK since I have no problems accessing the internet through it with my MacBook. The problem arises when I try to hook the ubuntu machine up to the wireless bridge. It will connect for a few minutes, but it will quickly disconnect without clear triggering event; it may be more likely to disconnect if there is a heavy traffic load going over it (could be something as simple as "cat big_text_file" in an ssh session). I've tried switching from dhclient to dhcpcd without much improvement. Here is the output from the syslog when it connects: Jun 30 17:10:08 Chicabuntu dhcpcd[28278]: wlan1: dhcpcd not running Jun 30 17:10:08 Chicabuntu dhcpcd[28278]: wlan1: exiting Jun 30 17:10:08 Chicabuntu dhcpcd[28312]: eth0: dhcpcd not running Jun 30 17:10:08 Chicabuntu dhcpcd[28312]: eth0: exiting Jun 30 17:10:08 Chicabuntu avahi-daemon[1041]: Interface eth0.IPv6 no longer relevant for mDNS. Jun 30 17:10:08 Chicabuntu avahi-daemon[1041]: Leaving mDNS multicast group on interface eth0.IPv6 with address fe80::21c:c4ff:fe31:1a83. Jun 30 17:10:08 Chicabuntu avahi-daemon[1041]: Withdrawing address record for fe80::21c:c4ff:fe31:1a83 on eth0. Jun 30 17:10:08 Chicabuntu kernel: [15184.976127] tg3 0000:3f:00.0: irq 44 for MSI/MSI-X Jun 30 17:10:08 Chicabuntu kernel: [15185.010805] ADDRCONF(NETDEV_UP): eth0: link is not ready Jun 30 17:10:08 Chicabuntu dhcpcd[28347]: eth0: dhcpcd not running Jun 30 17:10:08 Chicabuntu dhcpcd[28347]: eth0: exiting Jun 30 17:10:08 Chicabuntu kernel: [15185.180156] tg3 0000:3f:00.0: irq 44 for MSI/MSI-X Jun 30 17:10:08 Chicabuntu kernel: [15185.212785] ADDRCONF(NETDEV_UP): eth0: link is not ready Jun 30 17:10:10 Chicabuntu kernel: [15187.027445] tg3 0000:3f:00.0: eth0: Link is up at 100 Mbps, full duplex Jun 30 17:10:10 Chicabuntu kernel: [15187.027452] tg3 0000:3f:00.0: eth0: Flow control is on for TX and on for RX Jun 30 17:10:10 Chicabuntu kernel: [15187.028300] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready Jun 30 17:10:10 Chicabuntu dhcpcd[28353]: eth0: dhcpcd 3.2.3 starting Jun 30 17:10:10 Chicabuntu dhcpcd[28353]: eth0: hardware address = 00:1c:c4:31:1a:83 Jun 30 17:10:10 Chicabuntu dhcpcd[28353]: eth0: DUID = 00:01:00:01:17:81:85:79:00:1c:c4:31:1a:83 Jun 30 17:10:10 Chicabuntu dhcpcd[28353]: eth0: broadcasting for a lease Jun 30 17:10:11 Chicabuntu avahi-daemon[1041]: Joining mDNS multicast group on interface eth0.IPv6 with address fe80::21c:c4ff:fe31:1a83. Jun 30 17:10:11 Chicabuntu avahi-daemon[1041]: New relevant interface eth0.IPv6 for mDNS. Jun 30 17:10:11 Chicabuntu avahi-daemon[1041]: Registering new address record for fe80::21c:c4ff:fe31:1a83 on eth0.*. Jun 30 17:10:20 Chicabuntu kernel: [15197.568016] eth0: no IPv6 routers present Jun 30 17:10:29 Chicabuntu dhcpcd[28353]: eth0: offered 192.168.1.111 from 192.168.1.254 Jun 30 17:10:29 Chicabuntu dhcpcd[28353]: eth0: checking 192.168.1.111 is available on attached networks Jun 30 17:10:30 Chicabuntu dhcpcd[28353]: eth0: leased 192.168.1.111 for 86400 seconds Jun 30 17:10:30 Chicabuntu dhcpcd[28353]: eth0: adding IP address 192.168.1.111/24 Jun 30 17:10:30 Chicabuntu avahi-daemon[1041]: Joining mDNS multicast group on interface eth0.IPv4 with address 192.168.1.111. Jun 30 17:10:30 Chicabuntu dhcpcd[28353]: eth0: adding default route via 192.168.1.254 metric 0 Jun 30 17:10:30 Chicabuntu dhcpcd[28353]: eth0: exiting Jun 30 17:10:30 Chicabuntu avahi-daemon[1041]: New relevant interface eth0.IPv4 for mDNS. Jun 30 17:10:30 Chicabuntu avahi-daemon[1041]: Registering new address record for 192.168.1.111 on eth0.IPv4. Jun 30 17:10:30 Chicabuntu dhcpcd.sh: interface eth0 has been configured with new IP=192.168.1.111 Jun 30 17:10:39 Chicabuntu ntpdate[28439]: adjust time server 91.189.94.4 offset 0.001915 sec And here is the syslog from when it shuts down the connection without reason: Jun 30 17:12:15 Chicabuntu kernel: [15312.575455] tg3 0000:3f:00.0: eth0: Link is down Jun 30 17:12:16 Chicabuntu dhcpcd[28603]: eth0: sending signal 1 to pid 28361 Jun 30 17:12:16 Chicabuntu dhcpcd[28361]: eth0: received SIGHUP, releasing lease Jun 30 17:12:16 Chicabuntu dhcpcd[28603]: eth0: exiting Jun 30 17:12:16 Chicabuntu avahi-daemon[1041]: Withdrawing address record for 192.168.1.111 on eth0. Jun 30 17:12:16 Chicabuntu avahi-daemon[1041]: Leaving mDNS multicast group on interface eth0.IPv4 with address 192.168.1.111. Jun 30 17:12:16 Chicabuntu avahi-daemon[1041]: Interface eth0.IPv4 no longer relevant for mDNS. Jun 30 17:12:16 Chicabuntu dhcpcd[28361]: eth0: removing default route via 192.168.1.254 metric 0 Jun 30 17:12:16 Chicabuntu avahi-daemon[1041]: Interface eth0.IPv6 no longer relevant for mDNS. Jun 30 17:12:16 Chicabuntu avahi-daemon[1041]: Leaving mDNS multicast group on interface eth0.IPv6 with address fe80::21c:c4ff:fe31:1a83. Jun 30 17:12:16 Chicabuntu avahi-daemon[1041]: Withdrawing address record for fe80::21c:c4ff:fe31:1a83 on eth0. Jun 30 17:12:16 Chicabuntu dhcpcd[28361]: eth0: netlink: No such process Jun 30 17:12:16 Chicabuntu dhcpcd[28361]: eth0: removing IP address 192.168.1.111/24 Jun 30 17:12:16 Chicabuntu dhcpcd[28361]: eth0: netlink: Cannot assign requested address Jun 30 17:12:16 Chicabuntu dhcpcd[28361]: eth0: exiting Jun 30 17:12:16 Chicabuntu dhcpcd.sh: interface eth0 has been brought down Jun 30 17:12:17 Chicabuntu kernel: [15313.612141] tg3 0000:3f:00.0: irq 44 for MSI/MSI-X Jun 30 17:12:17 Chicabuntu kernel: [15313.644703] ADDRCONF(NETDEV_UP): eth0: link is not ready Jun 30 17:12:17 Chicabuntu dhcpcd[28674]: wlan1: dhcpcd not running Jun 30 17:12:17 Chicabuntu dhcpcd[28674]: wlan1: exiting Jun 30 17:12:17 Chicabuntu dhcpcd[28708]: eth0: dhcpcd not running Jun 30 17:12:17 Chicabuntu dhcpcd[28708]: eth0: exiting Jun 30 17:12:17 Chicabuntu kernel: [15313.912147] tg3 0000:3f:00.0: irq 44 for MSI/MSI-X Jun 30 17:12:17 Chicabuntu kernel: [15313.944746] ADDRCONF(NETDEV_UP): eth0: link is not ready Jun 30 17:12:18 Chicabuntu kernel: [15315.592569] tg3 0000:3f:00.0: eth0: Link is up at 100 Mbps, full duplex Jun 30 17:12:18 Chicabuntu kernel: [15315.592576] tg3 0000:3f:00.0: eth0: Flow control is on for TX and on for RX Jun 30 17:12:18 Chicabuntu kernel: [15315.593399] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready Jun 30 17:12:20 Chicabuntu avahi-daemon[1041]: Joining mDNS multicast group on interface eth0.IPv6 with address fe80::21c:c4ff:fe31:1a83. Jun 30 17:12:20 Chicabuntu avahi-daemon[1041]: New relevant interface eth0.IPv6 for mDNS. Jun 30 17:12:20 Chicabuntu avahi-daemon[1041]: Registering new address record for fe80::21c:c4ff:fe31:1a83 on eth0.*. Jun 30 17:12:29 Chicabuntu kernel: [15325.680019] eth0: no IPv6 routers present If this isn't useful, I can also post the wicd log, but that is kind of long. If anyone could help me I would be eternally grateful.

  Read the article

• The Linux powered LAN Gaming House

  - by sachinghalot

  LAN parties offer the enjoyment of head to head gaming in a real-life social environment. In general, they are experiencing decline thanks to the convenience of Internet gaming, but Kenton Varda is a man who takes his LAN gaming very seriously. His LAN gaming house is a fascinating project, and best of all, Linux plays a part in making it all work.Varda has done his own write ups (short, long), so I'm only going to give an overview here. The setup is a large house with 12 gaming stations and a single server computer.The client computers themselves are rack mounted in a server room, and they are linked to the gaming stations on the floor above via extension cables (HDMI for video and audio and USB for mouse and keyboard). Each client computer, built into a 3U rack mount case, is a well specced gaming rig in its own right, sporting an Intel Core i5 processor, 4GB of RAM and an Nvidia GeForce 560 along with a 60GB SSD drive.Originally, the client computers ran Ubuntu Linux rather than Windows and the games executed under WINE, but Varda had to abandon this scheme. As he explains on his site:"Amazingly, a majority of games worked fine, although many had minor bugs (e.g. flickering mouse cursor, minor rendering artifacts, etc.). Some games, however, did not work, or had bad bugs that made them annoying to play."Subsequently, the gaming computers have been moved onto a more conventional gaming choice, Windows 7. It's a shame that WINE couldn't be made to work, but I can sympathize as it's rare to find modern games that work perfectly and at full native speed. Another problem with WINE is that it tends to suffer from regressions, which is hardly surprising when considering the difficulty of constantly improving the emulation of the Windows API. Varda points out that he preferred working with Linux clients as they were easier to modify and came with less licensing baggage.Linux still runs the server and all of the tools used are open source software. The hardware here is a Intel Xeon E3-1230 with 4GB of RAM. The storage hanging off this machine is a bit more complex than the clients. In addition to the 60GB SSD, it also has 2x1TB drives and a 240GB SDD.When the clients were running Linux, they booted over PXE using a toolchain that will be familiar to anyone who has setup Linux network booting. DHCP pointed the clients to the server which then supplied PXELINUX using TFTP. When booted, file access was accomplished through network block device (NBD). This is a very easy to use system that allows you to serve the contents of a file as a block device over the network. The client computer runs a user mode device driver and the device can be mounted within the file system using the mount command.One snag with offering file access via NBD is that it's difficult to impose any security restrictions on different areas of the file system as the server only sees a single file. The advantage is perfomance as the client operating system simply sees a block device, and besides, these security issues aren't relevant in this setup.Unfortunately, Windows 7 can't use NBD, so, Varda had to switch to iSCSI (which works in both server and client mode under Linux). His network cards are not compliant with this standard when doing a netboot, but fortunately, gPXE came to the rescue, and he boostraps it over PXE. gPXE is also available as an ISO image and is worth knowing about if you encounter an awkward machine that can't manage a network boot. It can also optionally boot from a HTTP server rather than the more traditional TFTP server.According to Varda, booting all 12 machines over the Gigabit Ethernet network is surprisingly fast, and once booted, the machines don't seem noticeably slower than if they were using local storage. Once loaded, most games attempt to load in as much data as possible, filling the RAM, and the the disk and network bandwidth required is small. It's worth noting that these are aspects of this project that might differ from some other thin client scenarios.At time of writing, it doesn't seem as though the local storage of the client machines is being utilized. Instead, the clients boot into Windows from an image on the server that contains the operating system and the games themselves. It uses the copy on write feature of LVM so that any writes from a client are added to a differencing image allocated to that client. As the administrator, Varda can log into the Linux server and authorize changes to the master image for updates etc.SummaryOverall, Varda estimates the total cost of the project at about $40,000, and of course, he needed a property that offered a large physical space in order to house the computers and the gaming workstations. Obviously, this project has stark differences to most thin client projects. The balance between storage, network usage, GPU power and security would not be typical of an office installation, for example. The only letdown is that WINE proved to be insufficiently compatible to run a wide variety of modern games, but that is, perhaps, asking too much of it, and hats off to Varda for trying to make it work.

  Read the article

• Actionscript 3.0 - Enemies do not move right in my platformer game

  - by Christian Basar

  I am making a side-scrolling platformer game in Flash (Actionscript 3.0). I have made lots of progress lately, but I have come across a new problem. I will give some background first. My game level's terrain (or 'floor') is referenced by a MovieClip variable called 'floor.' My desire is to have the Player and enemy characters walk along the terrain. I have gotten the Player character to move on the terrain just fine; he walks up/down hills and falls whenever there is no ground beneath him. Here is the code I created to allow the Player to follow the terrain correctly. Much more code is used to control the Player, but only this code deals with the Player character's following of the terrain and gravity. // If the Player's not on the ground (not touching the 'floor' MovieClip)... if (!onGround) { // Disable ducking downKeyPressed = false; // Increase the Player's 'y' position by his 'y' velocity player.y += playerYVel; } // Increase the 'playerYVel' variable so that the Player will fall // progressively faster down the screen. This code technically // runs "all the time" but in reality it only affects the player // when he's off the ground. playerYVel += gravity; // Give the Player a terminal velocity of 15 px/frame if (playerYVel > 15) { playerYVel = 15; } // If the Player has not hit the 'floor,' increase his falling //speed if (! floor.hitTestPoint(player.x, player.y, true)) { player.y += playerYVel; // The Player is not on the ground when he's not touching it onGround = false; } Since getting this code to work for the Player, I have created a 'SkullDemon' class, which is one of the planned enemies for my game. I want the 'SkullDemon' objects to move along the terrain like the Player does. With lots of great help, I have already coded the EventListeners, etc. necessary for the 'SkullDemons' to move. Unfortunately, I am having trouble getting them to move along the terrain. In fact, they do not touch the terrain at all; they move along the top of the boundary of the 'floor' MovieClip! I had a simple text diagram showing what I mean, but unfortunately Stackoverflow does not format it correctly. I hope my problem is clear from my description. Strangely enough, my code for the Player's movement and the 'SkullDemon's' movement is almost exactly the same, yet the 'SkullDemons' do not move like the Player does. Here is my code for the SkullDemon movement: // Move all of the Skull Demons using this method protected function moveSkullDemons():void { // Go through the whole 'skullDemonContainer' for (var skullDi:int = 0; skullDi < skullDemonContainer.numChildren; skullDi++) { // Set the SkullDemon 'instance' variable to equal the current SkullDemon skullDIns = SkullDemon(skullDemonContainer.getChildAt(skullDi)); // For now, just move the Skull Demons left at 5 units per second skullDIns.x -= 5; // If the Skull Demon has not hit the 'floor,' increase his falling //speed if (! floor.hitTestPoint(skullDIns.x, skullDIns.y, true)) { // Increase the Skull Demon's 'y' position by his 'y' velocity skullDIns.y += skullDIns.sdYVel; // The Skull Demon is not on the ground when he's not touching it skullDIns.sdOnGround = false; } // Increase the 'sdYVel' variable so that the Skull Demon will fall // progressively faster down the screen. This code technically // runs "all the time" but in reality it only affects the Skull Demon // when he's off the ground. if (! skullDIns.sdOnGround) { skullDIns.sdYVel += skullDIns.sdGravity; // Give the Skull Demon a terminal velocity of 15 px/frame if (skullDIns.sdYVel > 15) { skullDIns.sdYVel = 15; } } // What happens when the Skull Demon lands on the ground after a fall? // The Skull Demon is only on the ground ('onGround == true') when // the ground is touching the Skull Demon MovieClip's origin point, // which is at the Skull Demon's bottom centre for (var i:int = 0; i < 10; i++) { // The Skull Demon is only on the ground ('onGround == true') when // the ground is touching the Skull Demon MovieClip's origin point, // which is at the Skull Demon's bottom centre if (floor.hitTestPoint(skullDIns.x, skullDIns.y, true)) { skullDIns.y = skullDIns.y; // Set the Skull Demon's y-axis speed to 0 skullDIns.sdYVel = 0; // The Skull Demon is on the ground again skullDIns.sdOnGround = true; } } } } // End of 'moveSkullDemons()' function It is almost like the 'SkullDemons' are interacting with the 'floor' MovieClip using the hitTestObject() function, and not the hitTestPoint() function which is what I want, and which works for the Player character. I am confused about this problem and would appreciate any help you could give me. Thanks!

  Read the article

• SPARC T4-4 Delivers World Record Performance on Oracle OLAP Perf Version 2 Benchmark

  - by Brian

  Oracle's SPARC T4-4 server delivered world record performance with subsecond response time on the Oracle OLAP Perf Version 2 benchmark using Oracle Database 11g Release 2 running on Oracle Solaris 11. The SPARC T4-4 server achieved throughput of 430,000 cube-queries/hour with an average response time of 0.85 seconds and the median response time of 0.43 seconds. This was achieved by using only 60% of the available CPU resources leaving plenty of headroom for future growth. The SPARC T4-4 server operated on an Oracle OLAP cube with a 4 billion row fact table of sales data containing 4 dimensions. This represents as many as 90 quintillion aggregate rows (90 followed by 18 zeros). Performance Landscape Oracle OLAP Perf Version 2 Benchmark 4 Billion Fact Table Rows System Queries/hour Users* Response Time (sec) Average Median SPARC T4-4 430,000 7,300 0.85 0.43 * Users - the supported number of users with a given think time of 60 seconds Configuration Summary and Results Hardware Configuration: SPARC T4-4 server with 4 x SPARC T4 processors, 3.0 GHz 1 TB memory Data Storage 1 x Sun Fire X4275 (using COMSTAR) 2 x Sun Storage F5100 Flash Array (each with 80 FMODs) Redo Storage 1 x Sun Fire X4275 (using COMSTAR with 8 HDD) Software Configuration: Oracle Solaris 11 11/11 Oracle Database 11g Release 2 (11.2.0.3) with Oracle OLAP option Benchmark Description The Oracle OLAP Perf Version 2 benchmark is a workload designed to demonstrate and stress the Oracle OLAP product's core features of fast query, fast update, and rich calculations on a multi-dimensional model to support enhanced Data Warehousing. The bulk of the benchmark entails running a number of concurrent users, each issuing typical multidimensional queries against an Oracle OLAP cube consisting of a number of years of sales data with fully pre-computed aggregations. The cube has four dimensions: time, product, customer, and channel. Each query user issues approximately 150 different queries. One query chain may ask for total sales in a particular region (e.g South America) for a particular time period (e.g. Q4 of 2010) followed by additional queries which drill down into sales for individual countries (e.g. Chile, Peru, etc.) with further queries drilling down into individual stores, etc. Another query chain may ask for yearly comparisons of total sales for some product category (e.g. major household appliances) and then issue further queries drilling down into particular products (e.g. refrigerators, stoves. etc.), particular regions, particular customers, etc. Results from version 2 of the benchmark are not comparable with version 1. The primary difference is the type of queries along with the query mix. Key Points and Best Practices Since typical BI users are often likely to issue similar queries, with different constants in the where clauses, setting the init.ora prameter "cursor_sharing" to "force" will provide for additional query throughput and a larger number of potential users. Except for this setting, together with making full use of available memory, out of the box performance for the OLAP Perf workload should provide results similar to what is reported here. For a given number of query users with zero think time, the main measured metrics are the average query response time, the median query response time, and the query throughput. A derived metric is the maximum number of users the system can support achieving the measured response time assuming some non-zero think time. The calculation of the maximum number of users follows from the well-known response-time law N = (rt + tt) * tp where rt is the average response time, tt is the think time and tp is the measured throughput. Setting tt to 60 seconds, rt to 0.85 seconds and tp to 119.44 queries/sec (430,000 queries/hour), the above formula shows that the T4-4 server will support 7,300 concurrent users with a think time of 60 seconds and an average response time of 0.85 seconds. For more information see chapter 3 from the book "Quantitative System Performance" cited below. -- See Also Quantitative System Performance Computer System Analysis Using Queueing Network Models Edward D. Lazowska, John Zahorjan, G. Scott Graham, Kenneth C. Sevcik external local Oracle Database 11g – Oracle OLAP oracle.com OTN SPARC T4-4 Server oracle.com OTN Oracle Solaris oracle.com OTN Oracle Database 11g Release 2 oracle.com OTN Disclosure Statement Copyright 2012, Oracle and/or its affiliates. All rights reserved. Oracle and Java are registered trademarks of Oracle and/or its affiliates. Other names may be trademarks of their respective owners. Results as of 11/2/2012.

  Read the article

• Yes, I did it - Skydiving in Mauritius

  Finally, I did it or better said we did it. Already back in November last year I saw the big billboard advertisement of Skydive Austral Mauritius near Caudan Waterfront in Port Louis and decided for myself that this is going to be the perfect birthday gift for my wife. Simply out of curiosity I would join her tandem jump with a second instructor. Due to her pregnancy of our son I had to be patient... But then finally, her birthday had arrived and on our midnight celebration session I showed her her netbook with the website preloaded. Actually, it was the "perfect" timing... Recovery from her cesarean is fine, local weather conditions are gorgious and the children were under surveillance of my mum - spending her annual holidays on the island. So, after late wake-up in the morning, we packed our stuff and off we went. According to Google Maps direction indication we had to drive for roughly 50km (only) but traffic here in Mauritius is always challenging. The dropzone is at the Zone Industrielle Mon Loisir Sugar Estate near Riviere du Rempart at the northern east coast. Anyways, we were not in a hurry and arrived there shortly after noon. The access road to the airfield are just small down-driven paths through sugar cane fields and according to our daughter "it's bumpy!". True true true... The facilities at Skydive Austral Mauritius are complete except for food. Enough space for parking, easy handling at the reception and a lot to see for the kids. There's even a big terrace with several sets of tables and chairs, small bar for soft drinks, strictly non-alcoholic. The team over there is all welcoming and warm-hearthy! Having the kids with us was no issue at all. Quite the opposite, our daugther was allowed to discover a lot of things than we adults did. Even visiting the small air plane was on the menu for her. Really great stuff! While waiting for our turn we enjoyed watching other people getting ready in the jump gear, taking off with the Cessna, and finally coming back down on the tandem parachute. Actually, the different expressions on their faces was one of the best parts while waiting. Great mental preparation as my wife was getting more anxious about her first jump... {loadposition content_adsense} First, we got some information about the procedures on the plane about how to get seated, tight up with our instructors and how to get ready for the jump off the plane as soon as we arrive the height of 10.000 ft. All well explained and easy to understand after all.Next, we met with our jumpers Chris and Lee aka "Rasta" to get dressed and ready for take-off. Those guys are really cool and relaxed for their job. From that point on, the DVD session / recording for my wife's birthday started and we really had a lot of fun... The difference between that small Cessna and a commercial flight with an Airbus or a Boeing is astronomic! The climb up to 10.000 ft took us roughly 25 minutes and we enjoyed the magnificent view over the turquoise lagunes near Poste de Flacq, Lafayette and Isle d'Ambre on the north-east coast. After flying through the clouds we sun-bathed and looked over "iced-sugar covered" Mauritius. You might have a look at the picture gallery of Skydive Mauritius for better imagination. The moment of truth, or better said, point of no return came after approximately 25 minutes. The door opens, moving into position on the side on top of the wheel and... out! Back flip and free fall! Slight turns and Wooooohooooo! through the clouds... It so amazing and breath-taking! So undescribable! You have to experience this yourself! Some seconds later the parachute opened and we glided smoothly with some turns and spins back down to the dropzone. The rest of the family could hear and see us soon and the landing was easy going. We never had any doubts or fear about our instructors. They did a great job and we are looking forward to book our next job. I might even consider to follow educational classes on skydiving and earn a license. By the way, feel free to get in touch with Skydive Austral Mauritius. Either via contact details on their website or tweeting a little bit with them. Follow the tweets of Chris and fellows on SkydiveAustral.

  Read the article

• Is Data Science “Science”?

  - by BuckWoody

  I hold the term “science” in very high esteem. I grew up on the Space Coast in Florida, and eventually worked at the Kennedy Space Center, surrounded by very intelligent people who worked in various scientific fields. Recently a new term has entered the computing dialog – “Data Scientist”. Since it’s not a standard term, it has a lot of definitions, and in fact has been disputed as a correct term. After all, the reasoning goes, if there’s no such thing as “Data Science” then how can there be a Data Scientist? This argument has been made before, albeit with a different term – “Computer Science”. In Peter Denning’s excellent article “Is Computer Science Science” (April  2005/Vol. 48, No. 4 COMMUNICATIONS OF THE ACM) there are many points that separate “science” from “engineering” and even “art”.  I won’t repeat the content of that article here (I recommend you read it on your own) but will leverage the points he makes there. Definition of Science To ask the question “is data science ‘science’” then we need to start with a definition of terms. Various references put the definition into the same basic areas: Study of the physical world Systematic and/or disciplined study of a subject area ...and then they include the things studied, the bodies of knowledge and so on. The word itself comes from Latin, and means merely “to know” or “to study to know”. Greek divides knowledge further into “truth” (episteme), and practical use or effects (tekhne). Normally computing falls into the second realm. Definition of Data Science And now a more controversial definition: Data Science. This term is so new and perhaps so niche that the major dictionaries haven’t yet picked it up (my OED reference is older – can’t afford to pop for the online registration at present). Researching the term's general use I created an amalgam of the definitions this way: “Studying and applying mathematical and other techniques to derive information from complex data sets.” Using this definition, data science certainly seems to be science - it's learning about and studying some object or area using systematic methods. But implicit within the definition is the word “application”, which makes the process more akin to engineering or even technology than science. In fact, I find that using these techniques – and data itself – part of science, not science itself. I leave out the concept of studying data patterns or algorithms as part of this discipline. That is actually a domain I see within research, mathematics or computer science. That of course is a type of science, but does not seek for practical applications. As part of the argument against calling it “Data Science”, some point to the scientific method of creating a hypothesis, testing with controls, testing results against the hypothesis, and documenting for repeatability.  These are not steps that we often take in working with data. We normally start with a question, and fit patterns and algorithms to predict outcomes and find correlations. In this way Data Science is more akin to statistics (and in fact makes heavy use of them) in the process rather than starting with an assumption and following on with it. So, is Data Science “Science”? I’m uncertain – and I’m uncertain it matters. Even if we are facing rampant “title inflation” these days (does anyone introduce themselves as a secretary or supervisor anymore?) I can tolerate the term at least from the intent that we use data to study problems across a wide spectrum, rather than restricting it to a single domain. And I also understand those who have worked hard to achieve the very honorable title of “scientist” who have issues with those who borrow the term without asking. What do you think? Science, or not? Does it matter?

  Read the article

• Accelerating 2d object collision with other objects [on hold]

  - by Silent Cave

  Making my very first attempt at game programming with SDL/OpenGL. So I made an object Actor witch can move in all four sides with acceleration. And there are bunch of other rectangles to collide to. the image Movement and collision detection alghorythms work just fine by itself, but when combined to prevent the green rectangle from crossing black rectangles, it gives me a kind of funny resault. Let me show you the code first: from Actor.h class Actor{ public: SDL_Rect * dim; alphaColor * col; float speed; float xlGrav, xrGrav, yuGrav, ydGrav; float acceleration; bool left,right,up,down; Actor(SDL_Rect * dim,alphaColor * col, float speed, float acceleration); bool colides(const SDL_Rect & rect); bool check_for_collisions(const std::vector<SDL_Rect*> & gameObjects ); }; from actor.cpp bool Actor::colides(const SDL_Rect & rect){ if (dim->x + dim->w < rect.x) return false; if (dim->x > rect.x + rect.w) return false; if (dim->y + dim->h < rect.y) return false; if (dim->y > rect.y + rect.h) return false; return true; } movement logic from main.cpp if (actor->left){ if(actor->xlGrav < actor->speed){ actor->xlGrav += actor->speed*actor->acceleration; }else actor->xlGrav = actor->speed; actor->dim->x -= actor->xlGrav; if(actor->check_for_collisions(gameObjects)){ actor->dim->x += actor->xlGrav; actor->xlGrav = 0; } } if (!actor->left){ if(actor->xlGrav - actor->speed*actor->acceleration > 0){ actor->xlGrav -= actor->speed*actor->acceleration; }else actor->xlGrav = 0; actor->dim->x -= actor->xlGrav; if(actor->check_for_collisions(gameObjects)){ actor->dim->x += actor->xlGrav; actor->xlGrav = 0; } } if (actor->right){ if(actor->xrGrav < actor->speed){ actor->xrGrav += actor->speed*actor->acceleration; }else actor->xrGrav = actor->speed; actor->dim->x += actor->xrGrav; if(actor->check_for_collisions(gameObjects)){ actor->dim->x -= actor->xrGrav; actor->xrGrav = 0; } } if (!actor->right){ if(actor->xrGrav - actor->speed*actor->acceleration > 0){ actor->xrGrav -= actor->speed*actor->acceleration; }else actor->xrGrav = 0; actor->dim->x += actor->xrGrav; if(actor->check_for_collisions(gameObjects)){ actor->dim->x -= actor->xrGrav; actor->xrGrav = 0; } } if (actor->up){ if(actor->yuGrav < actor->speed){ actor->yuGrav += actor->speed*actor->acceleration; }else actor->yuGrav = actor->speed; actor->dim->y -= actor->yuGrav; if(actor->check_for_collisions(gameObjects)){ actor->dim->y += actor->yuGrav; actor->yuGrav = 0; } } if (!actor->up){ if(actor->yuGrav - actor->speed*actor->acceleration > 0){ actor->yuGrav -= actor->speed*actor->acceleration; }else actor->yuGrav = 0; actor->dim->y -= actor->yuGrav; if(actor->check_for_collisions(gameObjects)){ actor->dim->y += actor->yuGrav; actor->yuGrav = 0; } } if (actor->down){ if(actor->ydGrav < actor->speed){ actor->ydGrav += actor->speed*actor->acceleration; }else actor->ydGrav = actor->speed; actor->dim->y += actor->ydGrav; if(actor->check_for_collisions(gameObjects)){ actor->dim->y -= actor->ydGrav; actor->ydGrav = 0; } } if (!actor->down){ if(actor->ydGrav - actor->speed*actor->acceleration > 0){ actor->ydGrav -= actor->speed*actor->acceleration; }else actor->ydGrav = 0; actor->dim->y += actor->ydGrav; if(actor->check_for_collisions(gameObjects)){ actor->dim->y -= actor->ydGrav; actor->ydGrav = 0; } } So, if the green box approaches an obstacle from up or left, everything goes as planned - object stops, and it's acceleration drops to zero. But if it comes from bottom or right, it enters into obstacles inner space and starts strangely dance, I'd rather say move in inverted controls. What do I fail to see?

  Read the article

• Seizing the Moment with Mobility

  - by Divya Malik

  Empowering people to work where they want to work is becoming more critical now with the consumerisation of technology. Employees are bringing their own devices to the workplace and expecting to be productive wherever they are. Sales people welcome the ability to run their critical business applications where they can be most effective which is typically on the road and when they are still with the customer. Oracle has invested many years of research in understanding customer's Mobile requirements. “The keys to building the best user experience were building in a lot of flexibility in ways to support sales, and being useful,” said Arin Bhowmick, Director, CRM, for the Applications UX team. “We did that by talking to and analyzing the needs of a lot of people in different roles.” The team studied real-life sales teams. “We wanted to study salespeople in context with their work,” Bhowmick said. “We studied all user types in the CRM world because we wanted to build a user interface and user experience that would cater to sales representatives, marketing managers, sales managers, and more. Not only did we do studies in our labs, but also we did studies in the field and in mobile environments because salespeople are always on the go.” Here is a recent post from Hernan Capdevila, Vice President, Oracle Fusion Apps which was featured on the Oracle Applications Blog.  Mobile devices are forcing a paradigm shift in the workplace – they’re changing the way businesses can do business and the type of cultures they can nurture. As our customers talk about their mobile needs, we hear them saying they want instant-on access to enterprise data so workers can be more effective at their jobs anywhere, anytime. They also are interested in being more cost effective from an IT point of view. The mobile revolution – with the idea of BYOD (bring your own device) – has added an interesting dynamic because previously IT was driving the employee device strategy and ecosystem. That's been turned on its head with the consumerization of IT. Now employees are figuring out how to use their personal devices for work purposes and IT has to figure out how to adapt. Blurring the Lines between Work and Personal Life My vision of where businesses will be five years from now is that our work lives and personal lives will be more interwoven together. In turn, enterprises will have to determine how to make employees’ work lives fit more into the fabric of their personal lives. And personal devices like smartphones are going to drive significant business value because they let us accomplish things very incrementally. I can be sitting on a train or in a taxi and be productive. At the end of any meeting, I can capture ideas and tasks or follow up with people in real time. Mobile devices enable this notion of seizing the moment – capitalizing on opportunities that might otherwise have slipped away because we're not connected. For the industry shapers out there, this is game changing. The lean and agile workforce is definitely the future. This notion of the board sitting down with the executive team to lay out strategic objectives for a three- to five-year plan, bringing in HR to determine how they're going to staff the strategic activities, kicking off the execution, and then revisiting the plan in three to five years to create another three- to five-year plan is yesterday's model. Businesses that continue to approach innovating in that way are in the dinosaur age. Today it's about incremental planning and incremental execution, which requires a lot of cohesion and synthesis within the workforce. There needs to be this interweaving notion within the workforce about how ideas cascade down, how people engage, how they stay connected, and how insights are shared. How to Survive and Thrive in Today’s Marketplace The notion of Facebook isn’t new. We lived it pre-Internet days with America Online and Prodigy – Facebook is just the renaissance of these services in a more viral and pervasive way. And given the trajectory of the consumerization of IT with people bringing their personal tooling to work, the enterprise has no option but to adapt. The sooner that businesses realize this from a top-down point of view the sooner that they will be able to really drive significant innovation and adapt to the marketplace. There are a small number of companies right now (I think it's closer to 20% rather than 80%, but the number is expanding) that are able to really innovate in this incremental marketplace. So from a competitive point of view, there's no choice but to be social and stay connected. By far the majority of users on Facebook and LinkedIn are mobile users – people on iPhones, smartphones, Android phones, and tablets. It's not the couch people, right? It's the on-the-go people – those people at the coffee shops. Usually when you're sitting at your desk on a big desktop computer, typically you have better things to do than to be on Facebook. This is a topic I'm extremely passionate about because I think mobile devices are game changing. Mobility delivers significant value to businesses – it also brings dramatic simplification from a functional point of view and transforms our work life experience. Hernan Capdevila Vice President, Oracle Applications Development

  Read the article

• How can I set my screen resolution to match my TV?

  - by Scott Severance

  I have a computer in my classroom that's connected to an LG smart TV (that's actually not so smart. I wouldn't recommend buying one.). For the touch interface, the TV wants a resolution of 1920x1080 at 60Hz. However, I can't seem to set the computer to that resolution. The display settings only offer 1024x768 and 640x480. The computer dual boots with Windows XP, where widescreen options are available in approximately the required size, but the exact resolution -- or even aspect ratio-- isn't available in XP either. I tried the following command: xrandr -s 1920x1080 -r 60 The response was: Size 1920x1080 not found in available modes Back in the old days, the solution would be to edit xorg.conf. However, since that file no longer exists, and I haven't found up-to-date info, I don't know what else to do. If it helps, this machine will never be connected to a different display, so resolution flexibility isn't important. Here's the output of lshw: *-display:0 description: VGA compatible controller product: 4 Series Chipset Integrated Graphics Controller vendor: Intel Corporation physical id: 2 bus info: pci@0000:00:02.0 version: 03 width: 64 bits clock: 33MHz capabilities: vga_controller bus_master cap_list rom configuration: driver=i915 latency=0 resources: irq:42 memory:fe800000-febfffff memory:d0000000-dfffffff ioport:ecd8(size=8) *-display:1 UNCLAIMED description: Display controller product: 4 Series Chipset Integrated Graphics Controller vendor: Intel Corporation physical id: 2.1 bus info: pci@0000:00:02.1 version: 03 width: 64 bits clock: 33MHz According to the system settings, my graphics driver is unknown and my "experience" is standard. This is 64-bit Ubuntu 12.04 (Precise) Note: There are a number of similar questions to this one, but they didn't include any answers that helped me. Update After posting this question, I noticed one in the sidebar that I hadn't found through search but which appeared to contain the answer. Based on that question, I created the /etc/X11/xorg.conf file below: Section "ServerLayout" Identifier "X.org Configured" Screen 0 "Screen0" 0 0 InputDevice "Mouse0" "CorePointer" InputDevice "Keyboard0" "CoreKeyboard" EndSection Section "Files" ModulePath "/usr/lib/xorg/modules" FontPath "/usr/share/fonts/X11/misc" FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" FontPath "built-ins" EndSection Section "Module" Load "glx" Load "dri2" Load "dbe" Load "dri" Load "record" Load "extmod" EndSection Section "InputDevice" Identifier "Keyboard0" Driver "kbd" EndSection Section "InputDevice" Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/input/mice" Option "ZAxisMapping" "4 5 6 7" EndSection Section "Monitor" Identifier "Monitor0" VendorName "LG" ModelName "Smart TV" EndSection Section "Device" ### Available Driver options are:- ### Values: <i>: integer, <f>: float, <bool>: "True"/"False", ### <string>: "String", <freq>: "<f> Hz/kHz/MHz", ### <percent>: "<f>%" ### [arg]: arg optional #Option "DRI" # [<bool>] #Option "ColorKey" # <i> #Option "VideoKey" # <i> #Option "FallbackDebug" # [<bool>] #Option "Tiling" # [<bool>] #Option "LinearFramebuffer" # [<bool>] #Option "Shadow" # [<bool>] #Option "SwapbuffersWait" # [<bool>] #Option "TripleBuffer" # [<bool>] #Option "XvMC" # [<bool>] #Option "XvPreferOverlay" # [<bool>] #Option "DebugFlushBatches" # [<bool>] #Option "DebugFlushCaches" # [<bool>] #Option "DebugWait" # [<bool>] #Option "HotPlug" # [<bool>] #Option "RelaxedFencing" # [<bool>] Identifier "Card0" Driver "intel" BusID "PCI:0:2:0" EndSection Section "Screen" Identifier "Screen0" Device "Card0" Monitor "Monitor0" DefaultDepth 24 #SubSection "Display" # Viewport 0 0 # Depth 1 #EndSubSection #SubSection "Display" # Viewport 0 0 # Depth 4 #EndSubSection #SubSection "Display" # Viewport 0 0 # Depth 8 #EndSubSection #SubSection "Display" # Viewport 0 0 # Depth 15 #EndSubSection #SubSection "Display" # Viewport 0 0 # Depth 16 #EndSubSection SubSection "Display" Viewport 0 0 Depth 24 Modes "1024x768" "1920x1080" EndSubSection EndSection According to /var/log/Xorg.0.log, my settings aren't being applied. In fact, I wonder if the config file is even being read. [ 1209.083] (**) intel(0): Depth 24, (--) framebuffer bpp 32 [ 1209.084] (==) intel(0): RGB weight 888 [ 1209.084] (==) intel(0): Default visual is TrueColor [ 1209.084] (II) intel(0): Integrated Graphics Chipset: Intel(R) G41 [ 1209.084] (--) intel(0): Chipset: "G41" [ 1209.084] (**) intel(0): Relaxed fencing enabled [ 1209.084] (**) intel(0): Wait on SwapBuffers? enabled [ 1209.084] (**) intel(0): Triple buffering? enabled [ 1209.084] (**) intel(0): Framebuffer tiled [ 1209.084] (**) intel(0): Pixmaps tiled [ 1209.084] (**) intel(0): 3D buffers tiled [ 1209.084] (**) intel(0): SwapBuffers wait enabled [ 1209.084] (==) intel(0): video overlay key set to 0x101fe [ 1209.172] (II) intel(0): Output VGA1 using monitor section Monitor0 [ 1209.260] (II) intel(0): EDID for output VGA1 [ 1209.260] (II) intel(0): Printing probed modes for output VGA1 [ 1209.260] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz) [ 1209.260] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz) [ 1209.260] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz) [ 1209.260] (II) intel(0): Modeline "848x480"x60.0 33.75 848 864 976 1088 480 486 494 517 +hsync +vsync (31.0 kHz) [ 1209.260] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 489 492 525 -hsync -vsync (31.5 kHz) [ 1209.260] (II) intel(0): Output VGA1 connected [ 1209.260] (II) intel(0): Using user preference for initial modes [ 1209.260] (II) intel(0): Output VGA1 using initial mode 1024x768 [ 1209.260] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated. [ 1209.260] (II) intel(0): Kernel page flipping support detected, enabling [ 1209.260] (==) intel(0): DPI set to (96, 96)

  Read the article

• Private Cloud: Putting some method behind the madness

  - by Sudip Datta

  Finally, I decided to join the blogging community. And what could be a better time to start than the week after OpenWorld 2012. 50K+ attendees, demonstrations, speaker sessions and a whole lot of buzz on Oracle Cloud..It was raining clouds in this year's Openworld. I am not here to write about Oracle's cloud strategy in general, but on Enterprise Manager's cloud management capabilities. This year's Openworld was the first after we announced the 12c Cloud Control and we were happy to share the stage with quite a few early adopters. Stay tuned for videos from our customers and partners, I will post them as they get published. I met a number of platform administrators in Oracle-DBAs, Middleware Admins, SOA Admins...The cloud has affected them all, at least to the point where it beckoned more than just curiosity..Most IT infrastructure are already heavily virtualized (on VMWare and on others including Oracle VM), and some would claim they are already on “cloud” (at least their Sysadmins told them so). But none of them were confident of the benefits because their pain points continued to grow.. Isn't cloud supposed to ease those? Instead, they were chasing hundreds of databases running on hundreds of VMs, often with as much certainty propounded by Heisenberg. What happened to the age-old IT discipline around administration, compliance, configuration management? VMs are great for what they are. I personally think they have opened the doors to new approaches in which an application stack gets provisioned and updated. In fact, Enterprise Manager 12c is possibly the only tool out there that can provision full-fledged application as VM Assemblies. In this year's Openworld, customers talked on how they provisioned RAC and Siebel assemblies, which as the techies out there know, are not trivial (hearing provisioning time for Siebel down from weeks to hours was gratifying indeed). However, I do have an issue with a "one-size fits all" approach to cloud. In a week's span, I met several personas: Project owners requiring an EC2 like VM instance for their projects Admins needing the same for Sparc-Solaris. DBAs requiring dedicated databases for new projects APEX Developers needing just a ready-to-consume schema as a service Java Developers looking for a runtime platform QA engineers needing a fast clone of their production environment If you drill down further, you will end up peeling more layers of the details. For example, the requirements for Load testing and Functional testing are very different. For Load testing the test environment should ideally be the same as the production. You shouldn't run production on Exadata and load test on a VM; they will just not be good representations of one another. For Functional testing it does not possibly matter. DBAs seem to be at the worst affected of the lot. It seems they have been asked to choose between agile provisioning and  faster runtime performance. And in some cases, it is really a Hobson's choice, because their infrastructure provider made no distinction between the OLTP application and the Virtual desktop! Sad indeed. When one looks at the portfolio of services that we already offer (vanilla IaaS, VM Assembly based PaaS, DBaaS) or have announced (Java PaaS, Instant Cloning, Schema-aaS), one can possibly think that we are trying to be the "renaissance man" ! Well I would have possibly digested that had it not been for the various personas that I described above. Getting the use cases right is very important for an application such as cloud management. We iterate and iterate over these over and over again and re-validate them in CABs (Customer Advisory Boards). We consider over the major aspects of tenancy: service placement, resource isolation (can a tenant execute an expensive SQL and run away with all the resources), quota and security. We, in Engineering, keep reminding ourselves that we are dealing with enterprise clouds. We owe it to our customer base ! In the coming posts, I will drill down more into each of the services. In the meanwhile, here are some collateral and  demos for starters with EM 12c. http://www.oracle.com/technetwork/oem/cloud-mgmt/index.html Sudip Datta The views expressed here are my own and do not necessarily reflect the views of Oracle. Stay Connected: Twitter | Facebook | YouTube | Linkedin | Newsletter --

  Read the article

• VS2010 crashes when opening a vsp generated using VS 2012

  - by Tarun Arora

  I recently profiled some web applications using Visual Studio 2012, a vsp (Visual Studio Profile) file was generated as a result of the profiling session. I could successfully open the vsp file in Visual Studio 2012 as expected but when I tried to open the vsp file in Visual Studio 2010 the VS2010 IDE crashed. As a responsible citizen I raised bug # 762202 on Microsoft Connect site using the Microsoft Visual Studio 2012 Feedback Client. Note – In case you didn’t already know, VSP generated in Visual Studio 2012 is not backward compatible. Please refer below for the steps to reproduce the issue and the resolution of the connect bug. 1. Behaviour and Steps to Reproduce the Issue Description I have generated a vsp file by using the Visual Studio 2012 Standalone profiler. When I try and open the vsp file in Visual Studio 2010 the IDE crashes. I understand that a vsp generated by using VS 2012 cannot be opened in VS 2010, but the IDE crashing is not the behaviour I would expect to see. Steps to Reproduce the Issue 1. Pick up the Stand lone profiler from the VS 2012 installation media. The folder has both x 64 and x86 installer, since the machine I am using is x64 bit. I have installed the x64 version of the standalone profiler. 2. I have configured the system path by setting the 'environment variable' path to where the profiler is installed. In my case this is, C:\Program Files (x86)\Microsoft Visual Studio 11.0\Team Tools\Performance Tools 3. Created a new environment variable _NT_SYMBOL_PATH and set its value to CACHE*C:\SYMBOLSCACHE;SRV*C:\SYMBOLSCACHE*HTTP://MSDL.MICROSOFT.COM/DOWNLOAD/SYMBOLS;\\FOO\BUILD1234 4. Open up CMD as an administrator and run 'VSPerfASPNETCmd /tip http://localhost:56180/ /o:C:\Temp\SampleEISK.vsp' 5. This generates the following message on the cmd       Microsoft (R) VSPerf ASP.NET Command, Version 11.0.0.0     Copyright (C) Microsoft Corporation. All rights reserved.     Configuring and attaching to ASP.NET process. Please wait.     Setting up profiling environment.     Starting monitor.     Launching ASP.NET service.     Attaching Monitor to process.     Launching Internet Explorer.     The profiler is attached to ASP.net. Please run your application scenario now.     Press Enter to stop data collection...   6. I perform certain actions and then I come back to the cmd and hit enter to shut down the profiling. Once I do this, the following message is written to the cmd, Press Enter to stop data collection... Profiling now shut down. Report file "C:\Temp\SampleEISK.vsp" was generated. Running VsPerfReport, packing symbols into the .VSP. Shutting down profiling and restarting ASP.NET. Please wait. Restarting w3wp.exe.   7. I look in the C:\Temp folder and I can see the SampleEISK.vsp file generated. I can successfully open this file in Visual Studio 2012. 8. When I am trying to open the vsp file in VS 2010 the VS 2010 IDE crashes. Kaboooom! What I would expect to happen I expect to receive a message "VS 2010 does not support the vsp file generated by VS 2012". What actually happened The VS 2010 IDE crashed 2. Resolution This is a valid bug! However, there isn’t much value in releasing a hotfix for this issue. Refer below to the resolution provided by the Visual Studio Profiler Team.  Thank you for taking the time to report this issue. We completely agree that Visual Studio 2010 should not crash. However in this particular case this is not a bug we are going to retroactively release a fix to 2010 for at this point. Given that a fix would not unblock the scenario of opening a 2012 created file on Visual Studio 2010, and there is not an active update channel for Visual Studio 2010 other than manually locating and installing hot fixes, we will not be fixing this particular issue. Best Regards, Visual Studio Profiler Team   Though it would be great to improve the behaviour however, this is not a defect that would stop you from progressing in any way. It’s important to note however that VSP files generated by Visual Studio 2012 are not backward compatible so you should refrain from opening these files in Visual Studio 2010.

  Read the article

• Right-Time Retail Part 2

  - by David Dorf

  This is part two of the three-part series. Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Right-Time Integration Of course these real-time enabling technologies are only as good as the systems that utilize them, and it only takes one bottleneck to slow everyone else down. What good is an immediate stock-out notification if the supply chain can’t react until tomorrow? Since being formed in 2006, Oracle Retail has been not only adding more integrations between systems, but also modernizing integrations for appropriate speed. Notice I tossed in the word “appropriate.” Not everything needs to be real-time – again, we’re talking about Right-Time Retail. The speed of data capture, analysis, and execution must be synchronized or you’re wasting effort. Unfortunately, there isn’t an enterprise-wide dial that you can crank-up for your estate. You’ll need to improve things piecemeal, with people and processes as limiting factors while choosing the appropriate types of integrations. There are three integration styles we see in the retail industry. First is batch. I know, the word “batch” just sounds slow, but this pattern is less about velocity and more about volume. When there are large amounts of data to be moved, you’ll want to use batch processes. Our technology of choice here is Oracle Data Integrator (ODI), which provides a fast version of Extract-Transform-Load (ETL). Instead of the three-step process, the load and transform steps are combined to save time. ODI is a key technology for moving data into Retail Analytics where we can apply science. Performing analytics on each sale as it occurs doesn’t make any sense, so we batch up a statistically significant amount and submit all at once. The second style is fire-and-forget. For some types of data, we want the data to arrive ASAP but immediacy is not necessary. Speed is less important than guaranteed delivery, so we use message-oriented middleware available in both Weblogic and the Oracle database. For example, Point-of-Service transactions are queued for delivery to Central Office at corporate. If the network is offline, those transactions remain in the queue and will be delivered when the network returns. Transactions cannot be lost and they must be delivered in order. (Ever tried processing a return before the sale?) To enhance the standard queues, we offer the Retail Integration Bus (RIB) to help the management and monitoring of fire-and-forget messaging in the enterprise. The third style is request-response and is most commonly implemented as Web services. This is a synchronous message where the sender waits for a response. In this situation, the volume of data is small, guaranteed delivery is not necessary, but speed is very important. Examples include the website checking inventory, a price lookup, or processing a credit card authorization. The Oracle Service Bus (OSB) typically handles the routing of such messages, and we’ve enhanced its abilities with the Retail Service Backbone (RSB). To better understand these integration patterns and where they apply within the retail enterprise, we’re providing the Retail Reference Library (RRL) at no charge to Oracle Retail customers. The library is composed of a large number of industry business processes, including those necessary to support Commerce Anywhere, as well as detailed architectural diagrams. These diagrams allow implementers to understand the systems involved in integrations and the specific data payloads. Furthermore, with our upcoming release we’ll be providing a new tool called the Retail Integration Console (RIC) that allows IT to monitor and manage integrations from a single point. Using RIC, retailers can quickly discern where integration activity is occurring, volume statistics, average response times, and errors. The dashboards provide the ability to dive down into the architecture documentation to gather information all the way down to the specific payload. Retailers that want real-time integrations will also need real-time monitoring of those integrations to ensure service-level agreements are maintained. Part 3 looks at marketing.

  Read the article

• How to break out of if statement

  - by TheBroodian

  I'm not sure if the title is exactly an accurate representation of what I'm actually trying to ask, but that was the best I could think of. I am experiencing an issue with my character class. I have developed a system so that he can perform chain attacks, and something that was important to me was that 1)button presses during the process of an attack wouldn't interrupt the character, and 2) at the same time, button presses should be stored so that the player can smoothly queue up chain attacks in the middle of one so that gameplay doesn't feel rigid or unresponsive. This all begins when the player presses the punch button. Upon pressing the punch button, the game checks the state of the dpad at the moment of the button press, and then translates the resulting combined buttons into an int which I use as an enumerator relating to a punch method for the character. The enumerator is placed into a List so that the next time the character's Update() method is called, it will execute the next punch in the list. It only executes the next punch if my character is flagged with acceptInput as true. All attacks flag acceptInput as false, to prevent the interruption of attacks, and then at the end of an attack, acceptInput is set back to true. While accepting input, all other actions are polled for, i.e. jumping, running, etc. In runtime, if I attack, and then queue up another attack behind it (by pressing forward+punch) I can see the second attack visibly execute, which should flag acceptInput as false, yet it gets interrupted and my character will stop punching and start running if I am still holding down the dpad. Included is some code for context. This is the input region for my character. //Placed this outside the if (acceptInput) tree because I want it //to be taken into account whether we are accepting input or not. //This will queue up attacks, which will only be executed if we are accepting input. //This creates a desired effect that helps control the character in a // smoother fashion for the player. if (Input.justPressed(buttonManager.Punch)) { int dpadPressed = Input.DpadState(0); if (attackBuffer.Count() < 1) { attackBuffer.Add(CheckPunch(dpadPressed)); } else { attackBuffer.Clear(); attackBuffer.Add(CheckPunch(dpadPressed)); } } if (acceptInput) { if (attackBuffer.Count() > 0) { ExecutePunch(attackBuffer[0]); attackBuffer.RemoveAt(0); } //If D-Pad left is being held down. if (Input.DpadDirectionHeld(0, buttonManager.Left)) { flipped = false; if (onGround) { newAnimation = "run"; } velocity = new Vector2(velocity.X - acceleration, velocity.Y); if (walking == true && velocity.X <= -walkSpeed) { velocity.X = -walkSpeed; } else if (walking == false && velocity.X <= -maxSpeed) { velocity.X = -maxSpeed; } } //If D-Pad right is being held down. if (Input.DpadDirectionHeld(0, buttonManager.Right)) { flipped = true; if (onGround) { newAnimation = "run"; } velocity = new Vector2(velocity.X + acceleration, velocity.Y); if (walking == true && velocity.X >= walkSpeed) { velocity.X = walkSpeed; } else if (walking == false && velocity.X >= maxSpeed) { velocity.X = maxSpeed; } } //If jump/accept button is pressed. if (Input.justPressed(buttonManager.JumpAccept)) { if (onGround) { Jump(); } } //If toggle element next button is pressed. if (Input.justPressed(buttonManager.ToggleElementNext)) { if (elements.Count != 0) { elementInUse++; if (elementInUse >= elements.Count) { elementInUse = 0; } } } //If toggle element last button is pressed. if (Input.justPressed(buttonManager.ToggleElementLast)) { if (elements.Count != 0) { elementInUse--; if (elementInUse < 0) { elementInUse = Convert.ToSByte(elements.Count() - 1); } } } //If character is in the process of jumping. if (jumping == true) { if (Input.heldDown(buttonManager.JumpAccept)) { velocity.Y -= fallSpeed.Y; maxJumpTime -= elapsed; } if (Input.justReleased(buttonManager.JumpAccept) || maxJumpTime <= 0) { jumping = false; maxJumpTime = 0; } } //Won't execute abilities if input isn't being accepted. foreach (PlayerAbility ability in playerAbilities) { if (buffer.Matches(ability)) { if (onGround) { ability.Activate(); } if (!onGround && ability.UsableInAir) { ability.Activate(); } else if (!onGround && !ability.UsableInAir) { buffer.Clear(); } } } } When the attackBuffer calls ExecutePunch(int) method, ExecutePunch() will call one of the following methods: private void NeutralPunch1() //0 { acceptInput = false; busy = true; newAnimation = "punch1"; numberOfAttacks++; timeSinceLastAttack = 0; } private void ForwardPunch2(bool toLeft) //true == 7, false == 4 { forwardPunch2Timer = 0f; acceptInput = false; busy = true; newAnimation = "punch2begin"; numberOfAttacks++; timeSinceLastAttack = 0; if (toLeft) { velocity.X -= 800; } if (!toLeft) { velocity.X += 800; } } I assume the attack is being interrupted due to the fact that ExecutePunch() is in the same if statement as running, but I haven't been able to find a suitable way to stop this happening. Thank you ahead of time for reading this, I apologize for it having become so long winded.

  Read the article

• What Counts for A DBA - Logic

  - by drsql

  "There are 10 kinds of people in the world. Those who will always wonder why there are only two items in my list and those who will figured it out the first time they saw this very old joke."  Those readers who will give up immediately and get frustrated with me for not explaining it to them are not likely going to be great technical professionals of any sort, much less a programmer or administrator who will be constantly dealing with the common failures that make up a DBA's day.  Many of these people will stare at this like a dog staring at a traffic signal and still have no more idea of how to decipher the riddle. Without explanation they will give up, call the joke "stupid" and, feeling quite superior, walk away indignantly to their job likely flipping patties of meat-by-product. As a data professional or any programmer who has strayed  to this very data-oriented blog, you would, if you are worth your weight in air, either have recognized immediately what was going on, or felt a bit ignorant.  Your friends are chuckling over the joke, but why is it funny? Unfortunately you left your smartphone at home on the dresser because you were up late last night programming and were running late to work (again), so you will either have to fake a laugh or figure it out.  Digging through the joke, you figure out that the word "two" is the most important part, since initially the joke mentioned 10. Hmm, why did they spell out two, but not ten? Maybe 10 could be interpreted a different way?  As a DBA, this sort of logic comes into play every day, and sometimes it doesn't involve nerdy riddles or Star Wars folklore.  When you turn on your computer and get the dreaded blue screen of death, you don't immediately cry to the help desk and sit on your thumbs and whine about not being able to work. Do that and your co-workers will question your nerd-hood; I know I certainly would. You figure out the problem, and when you have it narrowed down, you call the help desk and tell them what the problem is, usually having to explain that yes, you did in fact try to reboot before calling.  Of course, sometimes humility does come in to play when you reach the end of your abilities, but the ‘end of abilities’ is not something any of us recognize readily. It is handy to have the ability to use logic to solve uncommon problems: It becomes especially useful when you are trying to solve a data-related problem such as a query performance issue, and the way that you approach things will tell your coworkers a great deal about your abilities.  The novice is likely to immediately take the approach of  trying to add more indexes or blaming the hardware. As you become more and more experienced, it becomes increasingly obvious that performance issues are a very complex topic. A query may be slow for a myriad of reasons, from concurrency issues, a poor query plan because of a parameter value (like parameter sniffing,) poor coding standards, or just because it is a complex query that is going to be slow sometimes. Some queries that you will deal with may have twenty joins and hundreds of search criteria, and it can take a lot of thought to determine what is going on.  You can usually figure out the problem to almost any query by using basic knowledge of how joins and queries work, together with the help of such things as the query plan, profiler or monitoring tools.  It is not unlikely that it can take a full day’s work to understand some queries, breaking them down into smaller queries to find a very tiny problem. Not every time will you actually find the problem, and it is part of the process to occasionally admit that the problem is random, and everything works fine now.  Sometimes, it is necessary to realize that a problem is outside of your current knowledge, and admit temporary defeat: You can, at least, narrow down the source of the problem by looking logically at all of the possible solutions. By doing this, you can satisfy your curiosity and learn more about what the actual problem was. For example, in the joke, had you never been exposed to the concept of binary numbers, there is no way you could have known that binary - 10 = decimal - 2, but you could have logically come to the conclusion that 10 must not mean ten in the context of the joke, and at that point you are that much closer to getting the joke and at least won't feel so ignorant.

  Read the article

• "Mega Menus" for SEO [duplicate]

  - by Thought Space Designs

  This question already has an answer here: How do I handle having to many links on a webpage because of my menu 4 answers I'm using the term "Mega Menus" loosely here. I'm redesigning my WordPress site (it's going to be responsive), and as part of the redesign, I was debating incorporating some sort of descriptive menu setup. For example, normal navigation drop down menus come in the form of unordered lists of links like so: <nav> <ul> <li> <a href="#">Link1</a> </li> <li> <a href="#">Link2</a> </li> <li> <a href="#">Link3</a> <ul> <li> <a href="#">Sub Link1</a> </li> <li> <a href="#">Sub Link2</a> </li> <li> <a href="#">Sub Link3</a> </li> </ul> </li> <li> <a href="#">Link4</a> </li> </ul> </nav> What I'm looking to do is build my drop down menus with more information than your standard menu. For example, I have a top level link named "Team", and under that link, I want to make a large drop down that contains head shots, headers (in the form of styled p tags) and brief (<100 words) descriptions of each team member (only 2 currently). I want to accompany this with a "Read More" link that takes you to their actual team page. This is just one example, of course, and the other top level links would also have descriptive drop downs in the same fashion. On mobile, I was planning on hiding the "mega menu", and delivering a standard unordered list of links. Here's what I was thinking for overall structure and syntax: <nav> <ul> <li> <a href="#">Home</a> </li> <li> <a href="#">About</a> </li> <li> <a href="#">Team</a> <ul> <!-- DESKTOP --> <li class="mega-menu row"> <a class="col-sm-6" href="#"> <div class="row"> <div class="col-sm-4"> <img src="#" alt="Team Member 1" /> </div> <div class="col-sm-8"> <p class="header">Team Member 1</p> <p>Short description goes here.</p> </div> </div> </a> <a class="col-sm-6" href="#"> <!-- OTHER TEAM MEMBER INFO --> </a> </li> <!-- END DESKTOP --> <!-- MOBILE --> <li> <a href="#">Team Member 1</a> </li> <li> <a href="#">Team Member 2</a> </li> <!-- END MOBILE --> </ul> </li> <li> <a href="#">Contact</a> </li> </ul> </nav> Can anybody think of any potential SEO ramifications of doing this? I'm not going to be loading these menus full of links, so it shouldn't hurt page rank, but what are the effects of having a good bit of text and maybe even forms within nav elements? Is there such a thing as overloading nav with HTML? EDIT: Here's an example of what the menu would look like rendered on desktop. I'm currently hovering the "Team" menu, but you can't see because my mouse went away when I took the screenshot. EDIT 2: This question is not a duplicate. I'm not going to have "too many" links in my menus. I'm wondering how having images and text inside of header navigation will affect my menus. Also, I don't just want "yes, this is bad" answers. Please cite your sources and be specific with reasoning.

  Read the article

< Previous Page | 370 371 372 373 374 375 376 377 378 379 380 381  | Next Page >