Search Results

Search found 45843 results on 1834 pages for 'network access'.

Page 374/1834 | < Previous Page | 370 371 372 373 374 375 376 377 378 379 380 381  | Next Page >

  • How can I access my mini-pc (RaspberryPi / MK802 / Mele A1000 / VIA APC) via ethernet/wifi without having Monitor?

    - by sky770
    Soon I will be getting my own mini-PC (RaspberryPi / MK802 / Mele A1000 / VIA APC). But I was wondering whether is there any possibility that I can just power up and access my mini-pc's OS by connecting it to wifi/ethernet link and remotely access it over the LAN without actually needing a monitor (throughout the process?) ? I currently own a laptop and need a download box and later will be getting a HDTV for converting to a HTPC :D So, I don't really own a spare monitor now but I do have an extra keyboard and mouse. Is there exists any linux distro for the same? which I can use to directly fireup my mini-pc and hook it up across my LAN to remotely access through my laptop? Any suggestions appreciated :) Regards, sky770

    Read the article

  • Can't access internet with 32-bit browser(Chrome, FF, IE)! The 64-bit version of IE on Win 7 works f

    - by Sarveshwar
    I had installed Kaspersky AV 2010 two days ago. Everything was fine until I was not able to access the internet a few minutes back with the 32 bit browsers I have installed - Chrome, Firefox and the 32 bit IE. Then I see that utorrent is working fine!! So again I checked with the 64 bit IE and I could access the internet. I am currently using IE 64 bit to access superuser. Please help! I have uninstalled the KAV 2010. I thought that was the problem. Is this any virus or something? Also, whenever any browser (except IE 64), the screen freezes. Nothing except the browser works! And after the browser is closed, everything comes back to normal. Thanks!

    Read the article

  • Why can't a PC with 2 network cards be accessed by hostname?

    - by lewis
    I set up PC with 2 network cards, connected to the same LAN. I can connect to this PC (e.g. by remote desktop) only via ip-addresses. Accessing by hostname does not work. Why is this the case? UPDATE: Full environment 1. PC with 2 hardware network adapters. 2. On this PC installed VMWare Workstation. Created 3 VM's, networked by "bridged" network setting in VMWare. 3. In LAN all ip-addresses given from DHCP. 4. Win2k8 on all hosts (both physical and vitrual). As result: 1. PC has 2 ip-address (e.g. 192.168.1.71 and 192.168.1.72). PC available in LAN by ip-addreses, but not avail by hostname. 2. VM's has own ip-addr on each (e.g. 192.168.1.73, *74, *75 etc). They are available from LAN by their ip's, BUT not by their hostnames. How can I access to PC and to VM's by hostname?

    Read the article

  • URL is generating a /#!/splash-page

    - by user32642
    My site for some reason is generating a shebang - /#!/splash-page on the URL. For example when I type www.modernvintage1005.com, the browser returns www.modernvintage1005.com/#!/splash-page and every subsequent page is /#!/about, /#!/contact, and so forth. There's absolutely nothing on the Google about this. There is a lot of rewrite help to eliminate .index.php from the home page, but that's it. How do I rewrite it to just say domain.com and domain.com/about.html, etc.? Here is my .htaccess file if you need to see it. # Rewrite Rule <IfModule mod_rewrite.c> RewriteEngine On RewriteBase / RewriteRule ^index\.php$ - [L] RewriteCond %{REQUEST_FILENAME} !-f RewriteCond %{REQUEST_FILENAME} !-d RewriteRule . /index.php [L] </IfModule> # compress text, html, javascript, css, xml: <IfModule mod_deflate.c> AddOutputFilterByType DEFLATE text/plain AddOutputFilterByType DEFLATE text/html AddOutputFilterByType DEFLATE text/xml AddOutputFilterByType DEFLATE text/css AddOutputFilterByType DEFLATE application/xml AddOutputFilterByType DEFLATE application/xhtml+xml AddOutputFilterByType DEFLATE application/rss+xml AddOutputFilterByType DEFLATE application/javascript AddOutputFilterByType DEFLATE application/x-javascript AddType x-font/otf .otf AddType x-font/ttf .ttf AddType x-font/eot .eot AddType x-font/woff .woff AddType image/x-icon .ico AddType image/png .png </IfModule> ## EXPIRES CACHING ## <IfModule mod_expires.c> ExpiresActive On ExpiresByType image/jpg "access 1 year" ExpiresByType image/jpeg "access 1 year" ExpiresByType image/gif "access 1 year" ExpiresByType image/png "access 1 year" ExpiresByType text/css "access 1 month" ExpiresByType application/pdf "access 1 month" ExpiresByType text/x-javascript "access 1 month" ExpiresByType application/x-shockwave-flash "access 1 month" ExpiresByType image/x-icon "access 1 year" ExpiresDefault "access 2 days" </IfModule> ## EXPIRES CACHING ##

    Read the article

  • An access violation occurs, and the corresponding application pool is recycled when an ASP.NET 1.1 W

    976400 ... An access violation occurs, and the corresponding application pool is recycled when an ASP.NET 1.1 Web site is under a heavy loadThis RSS feed provided by kbAlerz.com.Visit kbAlertz.com to subscribe. It's 100% free and you'll be able to recieve e-mail or RSS updates for the technologies you pick from the Microsoft Knowledge Base....Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

    Read the article

  • How to grant standard users access to disk partitions and flash storage?

    - by JK04
    I have a partition that I need standard users (not administrators)to have read/write access to. However, this partition does not even appear to them as it does to me as an administrator. How can I make it so that standard users can read/write to this partition? It would be nice if they could have the ability to mount it if needed. I have the same problem with removable media - if I have a flash card in the computer, the standard users cannot see this storage media.

    Read the article

  • How do I enable Ubuntu Gnome system tools

    - by RussellW
    I am running Ubuntu 10 with Gnome 2.30.2. This is a VMWare workstation image provided by another company that I do not have support in this regard. I am trying to access the graphical tools for configuring the network, users, and services but the System-Administration menu does not have these options listed. The main issue I am trying to solve is to correct the problems with the gnome menu options and network settings I have the gnome-system-tools package installed, and I am unable to run command-line versions of the tools, such as nm-applet (I get no GUI if I run that command, the process is running in the background). I realize that I can perform many tasks command-line, but I would like to use the GUI for administrative functions as I am not overly proficient for all command for restarting services and setting a static IP with a specific gateway. Further, I can run gnome-nettool, but I cannot change the IP, I can only see my network card. nm-connection-editor does not show any network cards that I can configure to change the IP. Currently, I am getting a DHCP through my NAT in VMWare, I want to set it to a specific IP address though. Preferences Menu (note some missing options) ![Preferences Menu][1] Admin Menu (note some missing options) ![Admin Menu][2] Network Tools (I can view but not change IP address) ![Network Tools][3] Network Settings (Unable to change IP address) ![Network Settings][4] Network Connections (no connections listed, not even my existing ethernet NAT connection through VMWare) ![Network Connections][5] See images here that I have referenced: 1- http://i.imgur.com/kl8pP.png 2- http://i.imgur.com/K3Cjz.png 3- Iq7Xb.png 4- 7wheV.png 5- J2ad8.png

    Read the article

  • Several classes need to access the same data, where should the data be declared?

    - by Juicy
    I have a basic 2D tower defense game in C++. Each map is a separate class which inherits from GameState. The map delegates the logic and drawing code to each object in the game and sets data such as the map path. In pseudo-code the logic section might look something like this: update(): for each creep in creeps: creep.update() for each tower in towers: tower.update() for each missile in missiles: missile.update() The objects (creeps, towers and missiles) are stored in vector-of-pointers. The towers must have access to the vector-of-creeps and the vector-of-missiles to create new missiles and identify targets. The question is: where do I declare the vectors? Should they be members of the Map class, and passed as arguments to the tower.update() function? Or declared globally? Or are there other solutions I'm missing entirely?

    Read the article

  • Looking for easiest, most simple solution to run a customised DNS Server for my local network on Windows 7.

    - by Jamie G
    I need to forward some websites, such as http://testing.server/ to an fixed IP address on my local network. I can do this easily on one computer using the hosts file. However, I need this to work for all machines on my network. I think the best way to do this will be to setup my own DNS Servers and add the custom DNS settings there. However, I'm looking for the simplest way possible to do this - I really don't want to spend hours setting up Unix Servers and running tricky terminal based scripts just to do this! My server is a standard Windows 7 machine. My dream would be a nice simple windows program with a GUI where I could input my ISP's DNS server and it would use those records, unless I had specifically set up my own DNS for a domain to use instead. If it had a web based admin system that was accessible from another computer on the network that would be even better. Does anyone know of anything that can do this? Many thanks indeed.

    Read the article

  • is it possible in this case to get two IPv6 networks to communicate over the IPv4 Internet?

    - by user239167
    I have a setup of a laptop connected to a cellular IPv4 network (3G usb dongle) and PC connected to another IPv4/IPv6 network. Both have been configured to run as IPv6 routers and each has its IPv6 network. The laptop connects to the Internet via the 3G network with IPv4 address (private one and it is mostly changing) on one interface and has the other interface on AP mode providing its own private IPv6 network (2001:db8:444::/64). The PC connects to the Internet via the organization network with both public IPv4 and IPv6 addresses on one interface and has the other interface on AP mode providing its own private IPv6 network (2001:db8:222::/64). Both running Linux Ubuntu. Is it possible to get the two IPv6 network (2001:db8:222::/64 and 2001:db8:444::/64) to communicate over the IPv4 Internet? Is openvpn of any good in this case to get IPv6 traffic over IPv4-IPv4 tunnel? Thanks for helping in advance

    Read the article

  • why does our network printer not show up on some of our macs, but does show up on others? [on hold]

    - by peter
    We lost power in our building and now cannot get our HP laser jet 5200 to be recognized by half of our computers. We are all Macs, some running OS 10.7.5 can see the printer, others running 10.7.5 cannot, and those running 10.8.5 and 10.9 cannot. We've re-booted the router, turned off and on printer and macs—no go. The printer displays an IP address (dynamically assigned) but we can't access it. Tried to see it using CUPS—same story, can see it on some systems, not on others. Any thoughts?

    Read the article

  • Can't access internet with 32-bit browser(Chrome, FF, IE)! The 64-bit version of IE on Win 7 works fine

    - by Sarveshwar
    I had installed Kaspersky AV 2010 two days ago. Everything was fine until I was not able to access the internet a few minutes back with the 32 bit browsers I have installed - Chrome, Firefox and the 32 bit IE. Then I see that utorrent is working fine!! So again I checked with the 64 bit IE and I could access the internet. I am currently using IE 64 bit to access superuser. Please help! I have uninstalled the KAV 2010. I thought that was the problem. Is this any virus or something? Also, whenever any browser (except IE 64), the screen freezes. Nothing except the browser works! And after the browser is closed, everything comes back to normal. Thanks!

    Read the article

  • 2 Computers, same network, different outgoing speeds when uploading to internet?

    - by user117339
    I have 2 work machines in my office, a PowerMac G5 and a MacBook Air. Both behind an IPCop firewall. The PowerMac is connected through a gigabit switch, the MacBook Air is connected through a Netgear 802.11g access point that is then plugged into the gigabit switch. There is also a FreeNAS box, both machines are able to read and write files to it at close to their pipe speeds. The main problem is when I am trying to upload files to the internet at large. The G5 is only hitting 0.1 - 0.25 Mbps. The Macbook is able to hit 2-3 Mbps. The setup (G5 / IPCop / Network) has been the same for 5 years. The issues with the internet speed started about 3 months ago. I hadn't tested on the Macbook at this point. I had complained to the ISP, they said their modem needed a firmware update, did that nothing changed. Reset IPCop, turned off squid, etc. No changes. The ISP switched the office over to a better plan with a theoretical 6 Mbps up, still no change. At this point I tried testing the Macbook, and lo and behold there's the speed. But why? I have tried changing out everything, cables, switches, using another ethernet port on the G5, wiping the system, using DHCP, using manual IPs, changing DNS servers, etc. Nothing works. I figured that if there was something horribly wrong with the network, then internally I would find a similar issue, but that is perfect. iperf, ping, etc show no dropped packets and near saturation of the internal network. I'm at a loss as to what the heck is going on. Any ideas would be appreciated! Below are some screenshots of speedtest.net: G5: Macbook Air:

    Read the article

  • Squid3 not working. Access denied.

    - by Nitish
    I installed SQUID3 on a Linux machine with two ethernet interfaces (eth0 and eth1). I used the default settings in the squid.conf file and uncommented the two lines acl localnet src 192.168.0.0/16 and http_access allow localnet. eth0 is connected to a router, which provides Internet access. It is assigned an IP 192.168.1.2 by the router. I manually configured eth1 to have an IP address 192.168.5.1. It is connected to a switch. Systems having IP addresses 192.168.5.x are connected to this switch. I ran these two commands for NAT: iptables -t nat -A PREROUTING -i eth1 -p tcp -m tcp --dport 80 -j DNAT --to-destination 192.168.5.1:3128 iptables -t nat -A PREROUTING -i eth0 -p tcp -m tcp --dport 80 -j REDIRECT --to-ports 3128 But when I try to access internet from a system having IP 192.168.5.2 through the proxy I get an error that says "Access denied". What is wrong with my configuration?

    Read the article

  • How do I install OSQA with limited access to the server?

    - by Noir
    I would very much like to install OSQA on my host (provided/owned by my friend), but I can not make heads or tails of how I would go about doing it; a lot of the dependancies and such can't be installed with the current level of access (or most probably just knowledge) that I have. I can provide any further information required, and attempt to contact (friend) to see if he can do any of it for me, but I'm unsure as to how often I will be able to contact him. exec and shell_exec are not disabled on the server. If there are any other alternatives that I could use, please let me know! I tried Qwench but that was pretty buggy. I can usually deal with these kind of things, but this is my first foray into Python stuff!

    Read the article

  • How to divide work to a network of computers?

    - by Morpork
    Imagine a scenario as follows: Lets say you have a central computer which generates a lot of data. This data must go through some processing, which unfortunately takes longer than to generate. In order for the processing to catch up with real time, we plug in more slave computers. Further, we must take into account the possibility of slaves dropping out of the network mid-job as well as additional slaves being added. The central computer should ensure that all jobs are finished to its satisfaction, and that jobs dropped by a slave are retasked to another. The main question is: What approach should I use to achieve this? But perhaps the following would help me arrive at an answer: Is there a name or design pattern to what I am trying to do? What domain of knowledge do I need to achieve the goal of getting these computers to talk to each other? (eg. will a database, which I have some knowledge of, be enough or will this involve sockets, which I have yet to have knowledge of?) Are there any examples of such a system? The main question is a bit general so it would be good to have a starting point/reference point. Note I am assuming constraints of c++ and windows so solutions pointing in that direction would be appreciated.

    Read the article

  • Giving SSH access to a user, and security issues.

    - by Kris Sauquillo
    Okay, so I have a VPS and I made an account for a friend so he can host his own domains (using the reseller features in DirectAdmin). He's asking for SSH access, and I know that this is probably a bad idea. Does he have access to my whole server, such as executing commands, accessing my domains that I host on my server? I logged into my SSH using his account details and it let me navigate around all of the root folders/files, and his account is under /home/AccountName/. Is there anyway to restrict his access to his folder only? And the commands he can use?

    Read the article

  • Does anyone know of a inexpensive NAT router that has the ability to limit access to the Internet to

    - by Corey
    Does anyone know of a inexpensive NAT router that has the ability to limit access to the Internet to a specific MAC address? I know the Linksys routers have a MAC filtering feature, but it is the opposite of what I need. It allows you to block access to a specific MAC address. I need something that will block all, but allow an exception. I'm dealing with some VOIP issues in my company's network, and I think the answer is to have a separate router on the network for my PBX to use. I want to make sure that other nodes are not allowed to access the Internet via this second router.

    Read the article

  • Why does my computer not always automatically request a new DHCP lease when switching networks?

    - by KingJ
    I've noticed an interesting problem recently where my laptop will not automatically refresh my DHCP lease when changing between wireless networks. Instead, it will attempt to use the existing lease for the new network. Of course, since each network has different settings any connections will fail when using the old lease. While Windows will eventually request a new DHCP lease, it's often much faster for me to release the old lease and request a new, correct, lease. It puzzles me as to why this is not automatically done when associating to the network? One possible cause is that the laptop is put to sleep while connected to one network, then woken when in range of the other network. Nevertheless, I would expect that the lease would be renewed when the laptop associates to the other network rather than attempting to use the old lease. It should be noted that the two networks are completely different, both in terms of size, number of APs, network settings, SSIDs etc. One network is my home network and the other one is the campus-wide network at my University.

    Read the article

  • putty 0.61 : why do I see "Access Denied" message after I enter my login id?

    - by anjanbacchu
    I use putty to login to my RHEL 5.3 server. I'm prompted to enter my login as "login as " and I enter my login Id. as soon as I press ENTER, I see a "Access Denied" message following which I'm prompted with password. I successfully enter password and I'm through -- no problems. I tried the same with putty 0.60(as opposed to above putty 0.61) but in this version, I don't get any "access denied" error. What should I make of this ? Is putty 0.61 version buggy ? P.S : If I login using ssh.exe(from cygwin), then I'm fine -- I don't get any "access denied" errors. Thank you,

    Read the article

  • Server 2012 file server security - File access through software only?

    - by user1607914
    I have just setup a server 2012 essentials R2 box as a test bed for my small business. Its running Essentials R2 as a VM on a Essentials R2 host. I have set it up to be the DC and DHCP server and joined a client. My next task is to use it as a file server but I am not quite sure how to set it up. All the client interactions with the file server will be through client side software. I therefore do not want any access to the files apart from through the software. I have looked at the ntfs permissions and there is a permission called "List Folder/Read Data" however I am unsure this will do what I want. Is it possible to give access to the files but not allow access through the windows explorer / command line?

    Read the article

  • How to protect folder privacy against unethical network administrators? [closed]

    - by Trevor Trovalds
    I just need a technical solution for the sake of my group's shared passwords, projects, works, etc. safety. Our network has Active Directory with public/groups/users and NTFS permissions, under a Windows Server 2003 which will soon migrate to Windows Server 2008 R2. Our IT crowd is small, consisting of 2 DBAs, 4 designers, 6 developers (including me), 2 netadmins and (a lot of) tech supporters, everyone has local admin rights. Those 2 network admins weren't the ones who set the network up, they just took the lift recently when the previous ones quit. We usually find them laughing at private contents from users stored in the groups AD, sabotaging documents that don't match their personal tastes and, finally, this week we found out they stole a project we (developers and DBAs) were finishing and, long before, they presented it to the CEO as theirs without us knowing. I'm a systems analyst, and initially my group decided to store critical content, like shared passwords, inside encrypted .zip files. Unfortunately we couldn't do the same to the other hundreds of folders and files, which included the stolen project, because the zipping process would take too long for every update. We also tried an encrypted Subversion repository under SSL, but there are many dummies (~38 atm) involved in the projects that have trouble using TortoiseSVN when contributing, and very oftenly we had to fix messed up updates. Well, I think these two give the idea of what we've been trying to reach. So, is there a practical "individual" protection for our extensive data or my hope can already be euthanized? P.S.: Seriously, at the place where I live/work, political corruption gone the wildest, so denounce related options are likely impracticable. Yet both netadmins have strong "political bond" with the CEO and the President, hence their lousy behavior and our failed delation attempts.

    Read the article

  • Ubuntu Wireless not working on Lenovo t400

    - by VmaxBoss
    This problem started after upgrading to 12.04, an my system is 'up2date' Have tried most of the solution-proposals found on the net. lspci -nnk | grep -iA2 net 00:19.0 Ethernet controller [0200]: Intel Corporation 82567LF Gigabit Network Connection [8086:10bf] (rev 03) Subsystem: Lenovo Device [17aa:20ee] Kernel driver in use: e1000e 03:00.0 Network controller [0280]: Intel Corporation PRO/Wireless 5100 AGN [Shiloh] Network Connection [8086:4237] Subsystem: Intel Corporation WiFi Link 5100 AGN [8086:1211] Kernel driver in use: iwlagn iwconfig lo no wireless extensions. eth0 no wireless extensions. wlan0 IEEE 802.11abgn ESSID:off/any Mode:Managed Access Point: Not-Associated Tx-Power=15 dBm Retry long limit:7 RTS thr:off Fragment thr:off Encryption key:off Power Management:off sudo lshw -C network *-network description: Ethernet interface product: 82567LF Gigabit Network Connection vendor: Intel Corporation physical id: 19 bus info: pci@0000:00:19.0 logical name: eth0 version: 03 serial: 00:22:68:1a:c4:75 size: 100Mbit/s capacity: 1Gbit/s width: 32 bits clock: 33MHz capabilities: pm msi bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=e1000e driverversion=1.0.2-k2 duplex=full firmware=1.8-3 ip=192.168.2.154 latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s resources: irq:29 memory:fc000000-fc01ffff memory:fc024000-fc024fff ioport:1820(size=32) *-network DISABLED description: Wireless interface product: PRO/Wireless 5100 AGN [Shiloh] Network Connection vendor: Intel Corporation physical id: 0 bus info: pci@0000:03:00.0 logical name: wlan0 version: 00 serial: 00:26:c6:6c:2d:24 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=iwlagn latency=0 multicast=yes wireless=IEEE 802.11abgn resources: irq:30 memory:f4300000-f4301fff Please help Br/VB

    Read the article

  • How can I ensure an ex-administrator of Exchange doesn't still have email access somewhere?

    - by Tony T
    I work for a company in which an ex-employee had administrative access to Microsoft Exchange 2007, and I understand that at some points this person had email which was sent to other employees also forwarded on to him. Upon taking over the administration of the server, of course all of his known accounts were closed, and any of those forwarding rules were removed. However, I would like to ensure that we didn't miss anything. What would be the best way to ensure that: (1) There isn't still some sort-of email being forwarded on to him somewhere? (2) That he doesn't have some sort-of other access to an inbox or another employee's email? I am less concerned about access to the box itself as I am that there is an existing email rule somewhere that is still getting run, or that there is a distribution list that we missed, etc.

    Read the article

  • WSS 3.0 fails to hide quick launch items for which the current user does not have access

    - by Nils
    I'm running a Small Business Server 2008 with Windows Sharepoint Services 3.0 (WSS 3.0). I thought WSS was supposed to hide menu items for which the current logged in user don't have access? Apparently, all users can see all links, regardless of whether they have access. This applies to both links to newly created sub-sites as well as document libraries/lists. Is this expected behaviour, or is there a misconfiguration somewhere that causes the links to stay visible even for users without access? Thanks!

    Read the article

< Previous Page | 370 371 372 373 374 375 376 377 378 379 380 381  | Next Page >