rpg maker xp - Page 374

Windows 7 intermittently drops wired internet/lan connection.

- by CraigTP

In a nutshell, my Windows 7 Ultimate PC intermittently drops it's internet connection. Why? Background: My PC is wired to my ADSL modem/router which is directly connected to the phone line. I also have wireless connectivity turned on within the router for a laptop to connect wirelessly. Every few hours or so, when using my PC, I find I cannot access the internet and pages will not load. Eventually, Windows7 will update the network icon in the task-tray to show the exclamation mark symbol on the network icon. Opening up the Network And Sharing Centre will show the red cross between the "Multiple Networks" and "The Internet". Here's a picture of the "Network And Sharing Centre" (grabbed when everything was working!) As you can see, I'm running Sun's VirtualBox on this machine and that creates a Network connection for itself. This doesn't seem to affect the intermittent dropping (i.e. the intermittent drops occur whether the VirtualBox connection is in use or not). When the connection does drop, I cannot access any internet pages, nor can I access the router's web admin page at http://192.168.1.1/, so I'm assuming I've lost all local LAN access too. It's definitely not the router (or the internet connection itself) as my laptop, using the wireless connection (and running Vista Home Premium) continues to be able to access the internet (and the router's web admin pages) just fine. Every time this happens, I can immediately restore all internet and LAN access by opening Network Adapter page, disabling the "Local Area Connection" and then re-enabling it. Give it a few seconds and everything is fine again. I assume this is because, beneath the GUI, it's effectively doing an "ipconfig /release" then "ipconfig /renew". Why does this happen in the first place, though? I've googled for this and seen quite a few other people (even on MSDN/Technet forums) experiencing the same or almost the same problem, but with no clear resolution. Suggestions of turning off IPv6 on the LAN adapter, and ensuring there's no power management "sleeping" the network adapter have been tried but do not cure the problem. There does not seem to be any particular sequence of events that cause it to happen either. I've had it go twice in 20 minutes when just randomly browsing the web with no other traffic, and I've also had it go once then not go again for 2-3 hours with the same sort of usage. Can anyone tell me why this is happening and how to make it stop? EDIT: Additional information based upon the answer provided so far: Firstly, I forgot the mention that this is Windows 7 64 bit if that makes any difference at all. I mentioned that I don't think the VirtualBox network adpater is causing this problem in any way, and I also have VirtualBox installed on two other machines, one running Vista Home Premium and the other running XP. Neither of these machine experience the same network connectivity issues as the Windows 7 machine. The IP assignment for the Windows 7 machine is the same both before and after the "drop". I have a DHCP server on the router issuing IP Addresses, however my Windows 7 machine uses a static address. Here's the output from "ipconfig": Ethernet adapter Local Area Connection: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Realtek PCIe GBE Family Controller DHCP Enabled. . . . . . . . . . . : No Autoconfiguration Enabled . . . . : Yes IPv4 Address. . . . . . . . . . . : 192.168.1.2(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : 192.168.1.1 DNS Servers . . . . . . . . . . . : 192.168.1.1 NetBIOS over Tcpip. . . . . . . . : Enabled Within the system's event logs, the only event that relates to the connection dropping is a "DNS Client Event" and this is generated after the connection has dropped and is an event detailing that DNS information can't be found for whatever website I may be trying to access, just as the connection drops: Log Name: System Source: Microsoft-Windows-DNS-Client Event ID: 1014 Task Category: None Level: Warning Keywords: User: NETWORK SERVICE Description: Name resolution for the name weather.service.msn.com timed out after none of the configured DNS servers responded. The network adapter chipset is Realtek PCIe GBE Family Controller and I have confirmed that this is the correct chipset for the motherboard (Asus M4A77TD PRO), and in fact, Windows Update installed an updated driver for this on 12/Jan/2009. The details of the update say that it's a Realtek software update from December 2009. Incidentally, I was still having the same intermittent problems prior to this update. It seems to have made no difference at all. EDIT 2 (1 Feb 2010): In my quest to solve this problem, I have discovered some more interesting information. On another forum, someone suggested that I should try running Windows in "Safe Mode With Networking" and see if the problem continues to occur. This was a fantastic suggestion and I don't know why I didn't think of it sooner myself. So, I proceeded to run in Safe Mode with Networking for a number of hours, and amazingly, the "drops" didn't occur once. It was a positive discovery, however, due to the intermittent nature of the original problem, I wasn't completely convinced that the problem was cured. One thing I did note is that the fan on my GFX card was running alot louder than normal. This is due to the fact that I have an ASUS ENGTS250 graphics card (http://www.asus.com/product.aspx?P_ID=B6imcoax3MRY42f3) which had a known problem with a noisy fan until a BIOS update fixed the issue. (See the "Manufacturer Response" here: http://www.newegg.com/Product/Product.aspx?Item=N82E16814121334 for details). Well, running in safe mode had the fan running (incorrectly) at full speed (as it did before the BIOS update), but with an (apparently) stable network connection. Obviously some driver was not loaded for the GFX card when in Safe Mode so this got me thinking about the GFX card (since the very noisy fan was quite obvious when running in Safe Mode). I rebooted into normal mode, and found that Nvidia had a very up-to-date new driver for my GFX card (only about 1 week old), so I downloaded the appropriate driver and installed it. After installation and a reboot, I was able to use my PC for an entire day with NO NETWORK DROPS!!! This was on Saturday. However, on the Sunday, I also had my PC for pretty much the entire day and experienced 2 network drops. No other changes have been made to my PC in this time. So, the story seems to be that updating my graphics card drivers seems to have improved (if not completely fixed) the issue, however, I'm still searching for a proper fix for this problem. Hopefully, this information may help anyone who may have additional ideas as to why this problem is occuring in the first place. (And why does new GFX card drivers have anything to do with the network?) I appreciate everyone's feedback so far. However, I'll have to ask once more if anyone has any further ideas of how to fix this particular problem? Thanks in advance.

Read the article

How to automatically remove Flash history/privacy trail? Or stop Flash from storing it?

- by Arjan van Bentem

Many people have heard about third-party cookies, and some browsers even block those by default. Some people may even be using Private Browsing modes. However, only few seem to realise that Adobe's Flash player also leaves a cross-browser trail on your local hard drive, and allows for sending cookie-like information back to the server, including third-party sites. And because it is a plugin, Flash does not take any of the browser's privacy settings into account. Sorry for the long post, but first some details about why using Flash raises a privacy concern, followed by the results of my tests: The Flash player keeps a cross-browser history of the domain names of the Flash-sites your computer has visited. Unlike your browser's history, this history is not limited to a certain number of days. History is also recorded while using so-called Private Browsing modes. It is stored on your hard drive (though, as described below, without going to Adobe's site you won't know what is stored). I am not sure if any date and time information is kept about each visit, but to see the domain names: right-click on some Flash content, open the settings dialog, and click the Help icon or click the Advanced button within the Privacy tab. This opens a browser to the help pages on Adobe.com, where one can click through to the Website Storage Settings panel. One can clear the existing list, but one cannot stop it from being recorded again. Flash allows for storing data on your local hard drive, using so-called Local Shared Objects (aka "Flash Cookies"). Just like HTTP cookies, this data can be sent back to the server, for tracking purposes. They are cross-browser, have no expiration date, and no user defined maximum lifetime can be set in the Flash preferences either. These not being HTTP cookies, they are (of course) not blocked by a browser's cookies preferences and are not removed when the normal HTTP cookies are deleted. Adobe has announced that version 10.1 will obey Private Browsing in most popular browsers, but unfortunately no word about also removing the data whenever normal cookies are deleted manually. And its implementation might be confusing: [..] if the browser is in normal browsing mode when the Flash Player instance is created, then that particular instance will forever be in normal browsing mode (private browsing is turned off). Accordingly, toggling private browsing on or off without refreshing the page or closing the private browsing window will not impact Flash Player. Local Shared Objects are not limited to the site you visit, and third-party storage is enabled by default. At the Global Storage Settings panel one can deselect the default Allow third-party Flash content to store data on your computer. Because of the cross-browser and expiration-less nature (and the fact that few people know about it), I feel that the cross-browser third-party Flash Cookies are more dangerous for visitor tracking than third-party normal HTTP cookies. They are even used to restore plain HTTP cookies that the user tried to delete: "All advertisers, websites and networks use cookies for targeted advertising, but cookies are under attack. According to current research they are being erased by 40% of users creating serious problems," says Mookie Tenembaum, founder of United Virtualities. "From simple frequency capping to the more sophisticated behavioral targeting, cookies are an essential part of any online ad campaign. PIE ["Persistent Identification Element"] will give publishers and third-party providers a persistent backup to cookies effectively rendering them unassailable", adds Tenembaum. [..] To justify this tracking mechanism, UV's Tenembaum said, "The user is not proficient enough in technology to know if the cookie is good or bad, or how it works." When selecting None (zero KB) for Specify the amount of disk space that website websites that you haven't yet visited can use to store information on your computer, and checking Never ask again then some sites do not work. However, the same site might work when setting it to None but without selecting Never ask again, and then choose Deny whenever prompted. Both options would result in zero KB of data being allowed, but the behaviour differs. The plugin also provides a Flash Player cache for Adobe-signed files. I guess these files are not an issue. So: how to automatically delete that information? On a Mac, one can find a settings.sol file and a folder for each visited Flash-website in: $HOME/Library/Preferences/Macromedia/Flash Player/macromedia.com/support/flashplayer/sys/ Deleting the settings.sol file and all the folders in sys, removes the trail from the settings panels. However, the actual Local Shared Ojects are elsewhere (see Wikipedia for locations on other operating systems), in a randomly named subfolder of: $HOME/Library/Preferences/Macromedia/Flash Player/#SharedObjects But then: how to remove this automatically? Simply removing the folders and the settings.sol file every now and then (like by using launchd or Windows' Task Scheduler) may interfere with active browsers. Or is it safe to assume that, given the cross-browser nature, the plugin would not care if things are removed while it is active? Only clearing during log-off may not work for those who hibernate all the time. Firefox users can install BetterPrivacy or Objection to delete the Local Shared Objects (for all others browsers as well). I don't know if that also deletes the trail of website domain names. Or: how to stop Flash from storing a history trail? Change of plans: I'm currently testing prohibiting Flash to write to its own sys and #SharedObjects folders. So far, Flash has not tried to restore permissions (though, when deleting the folders, Flash will of course recreate them). I've not encountered any problems but this may take some while to validate, using multiple browsers and sites. I've not yet found a log that reports errors. On a Mac: cd "$HOME/Library/Preferences/Macromedia/Flash Player/macromedia.com/support/flashplayer" rm -r sys/* chmod u-w sys cd "$HOME/Library/Preferences/Macromedia/Flash Player" # preserve the randomly named subfolders (only preserving the latest would suffice; see below) rm -r \#SharedObjects/*/* chmod -R u-w \#SharedObjects I guess the above chmods cannot be achieved on an old Windows system (I'm not sure about XP and Vista?). Though maybe on Windows one could replace the folders sys and #SharedObjects with dummy files with the same names? Anyone? Obviously, keeping Flash from storing those Local Shared Objects for all sites may cause problems. Some test results (Flash 10 on Mac OS X): When blocking the sys folder (even when leaving the #SharedObjects folder writable) then YouTube won't remember your volume settings while viewing multiple videos. Temporarily allowing write access to the blocked folders while visiting trusted sites (to only create folders for domains you like, maybe including references in settings.sol) solves that. This way, for YouTube, Flash could be allowed to write to sys/#s.ytimg.com and #SharedObjects/s.ytimg.com, while Flash could not create new folders for other domains. One may also need to make settings.sol read-only afterwards, or delete it again. When blocking both the sys and #SharedObjects folders, YouTube and Vimeo work fine (though they might not remember any settings). However, Bits on the Run refuses to even show the video player. This is solved by temporarily unblocking the #SharedObjects folder, to allow Flash to create a subfolder with some random name. Within this folder, it would create yet another folder for the current Flash website (content.bitsontherun.com). Removing that website-specific folder, and blocking both #SharedObjects and the randomly named subfolder, still seems to allow Bits on the Run to operate, even though it still cannot write anything to disk. So: the existence of the randomly named subfolder (even when write protected) is important for some sites. When I first found the #SharedObjects folder, it held many subfolders with random names, some created on the very same day. I wonder when Flash decides it wants a new folder, and how it determines (and remembers) that random name. For a moment I considered not blocking write access for sys and #SharedObjects, but explicitly creating read-only folders for well-known third-party tracking domains (like based on a list from, for example, AdBlock Plus). That way, any other domain could still create Local Shared Objects. But the list would be long, and the domains from AdBlock Plus are probably all third-party domains anyway, so disabling Allow third-party Flash content to store data on your computer might have the very same result. Any experience anyone? (Final notes: if the above links to the settings panels do not work in the future, then use the URL that is known to Flash player as a starting point: www.adobe.com/go/settingsmanager. See also "You Deleted Your Cookies? Think Again" at Wired.com -- which uses Flash cookies itself as well... For the very suspicious using Time Machine: you may want to exclude both folders, for each user, and remove the trace that is already on your backup.)

Read the article

Can't get simple Apache VHost up and running

- by TK Kocheran

Unfortunately, I can't seem to get a simple Apache VHost online. I used to simply have one VHost which bound to all: <VirtualHost *:80>, but this isn't appropriate for security anymore. I need to have one VHost for localhost requests (ie my dev server) and one for incoming requests via my domain name. Here's my new VHost: NameVirtualHost domain1.com <VirtualHost domain1.com:80> DocumentRoot /var/www ServerName domain1.com </VirtualHost> <VirtualHost domain2.com:80> DocumentRoot /var/www ServerName domain2.com </VirtualHost> After I restart my server, I see the following errors in my log: [Wed Feb 16 11:26:36 2011] [error] [client ####.###.###.###] File does not exist: /htdocs [Wed Feb 16 11:26:36 2011] [error] [client ####.###.###.###] File does not exist: /htdocs What am I doing wrong? EDIT As per the answer give below, I have modified my configuration. Here are my configuration files: /etc/apache2/ports.conf: Listen 80 <IfModule mod_ssl.c> # If you add NameVirtualHost *:443 here, you will also have to change # the VirtualHost statement in /etc/apache2/sites-available/default-ssl # to <VirtualHost *:443> # Server Name Indication for SSL named virtual hosts is currently not # supported by MSIE on Windows XP. Listen 443 </IfModule> <IfModule mod_gnutls.c> Listen 443 </IfModule> Here are my actual defined sites: /etc/apache2/sites-enabled/000-localhost: NameVirtualHost 127.0.0.1:80 <VirtualHost 127.0.0.1:80> ServerAdmin ######### DocumentRoot /var/www <Directory /> Options FollowSymLinks AllowOverride None </Directory> <Directory /var/www/> Options Indexes FollowSymLinks MultiViews AllowOverride None Order allow,deny allow from all </Directory> ScriptAlias /cgi-bin/ /usr/lib/cgi-bin/ <Directory "/usr/lib/cgi-bin"> AllowOverride None Options +ExecCGI -MultiViews +SymLinksIfOwnerMatch Order allow,deny Allow from all </Directory> ErrorLog /var/log/apache2/error.log # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. LogLevel warn CustomLog /var/log/apache2/access.log combined Alias /doc/ "/usr/share/doc/" <Directory "/usr/share/doc/"> Options Indexes MultiViews FollowSymLinks AllowOverride None Order deny,allow Deny from all Allow from 127.0.0.0/255.0.0.0 ::1/128 </Directory> RewriteEngine On RewriteLog "/var/log/apache2/mod_rewrite.log" RewriteLogLevel 9 <Location /> <Limit GET POST PUT> order allow,deny allow from all deny from 65.34.248.110 deny from 69.122.239.3 deny from 58.218.199.147 deny from 65.34.248.110 </Limit> </Location> </VirtualHost> /etc/apache2/sites-enabled/001-rfkrocktk.dyndns.org: NameVirtualHost rfkrocktk.dyndns.org:80 <VirtualHost rfkrocktk.dyndns.org:80> DocumentRoot /var/www ServerName rfkrocktk.dyndns.org </VirtualHost> And, just for kicks, my main file: /etc/apache2/apache2.conf: # # Based upon the NCSA server configuration files originally by Rob McCool. # # This is the main Apache server configuration file. It contains the # configuration directives that give the server its instructions. # See http://httpd.apache.org/docs/2.2/ for detailed information about # the directives. # # Do NOT simply read the instructions in here without understanding # what they do. They're here only as hints or reminders. If you are unsure # consult the online docs. You have been warned. # # The configuration directives are grouped into three basic sections: # 1. Directives that control the operation of the Apache server process as a # whole (the 'global environment'). # 2. Directives that define the parameters of the 'main' or 'default' server, # which responds to requests that aren't handled by a virtual host. # These directives also provide default values for the settings # of all virtual hosts. # 3. Settings for virtual hosts, which allow Web requests to be sent to # different IP addresses or hostnames and have them handled by the # same Apache server process. # # Configuration and logfile names: If the filenames you specify for many # of the server's control files begin with "/" (or "drive:/" for Win32), the # server will use that explicit path. If the filenames do *not* begin # with "/", the value of ServerRoot is prepended -- so "/var/log/apache2/foo.log" # with ServerRoot set to "" will be interpreted by the # server as "//var/log/apache2/foo.log". # ### Section 1: Global Environment # # The directives in this section affect the overall operation of Apache, # such as the number of concurrent requests it can handle or where it # can find its configuration files. # # # ServerRoot: The top of the directory tree under which the server's # configuration, error, and log files are kept. # # NOTE! If you intend to place this on an NFS (or otherwise network) # mounted filesystem then please read the LockFile documentation (available # at <URL:http://httpd.apache.org/docs-2.1/mod/mpm_common.html#lockfile>); # you will save yourself a lot of trouble. # # Do NOT add a slash at the end of the directory path. # ServerRoot "/etc/apache2" # # The accept serialization lock file MUST BE STORED ON A LOCAL DISK. # #<IfModule !mpm_winnt.c> #<IfModule !mpm_netware.c> LockFile /var/lock/apache2/accept.lock #</IfModule> #</IfModule> # # PidFile: The file in which the server should record its process # identification number when it starts. # This needs to be set in /etc/apache2/envvars # PidFile ${APACHE_PID_FILE} # # Timeout: The number of seconds before receives and sends time out. # Timeout 300 # # KeepAlive: Whether or not to allow persistent connections (more than # one request per connection). Set to "Off" to deactivate. # KeepAlive On # # MaxKeepAliveRequests: The maximum number of requests to allow # during a persistent connection. Set to 0 to allow an unlimited amount. # We recommend you leave this number high, for maximum performance. # MaxKeepAliveRequests 100 # # KeepAliveTimeout: Number of seconds to wait for the next request from the # same client on the same connection. # KeepAliveTimeout 15 ## ## Server-Pool Size Regulation (MPM specific) ## # prefork MPM # StartServers: number of server processes to start # MinSpareServers: minimum number of server processes which are kept spare # MaxSpareServers: maximum number of server processes which are kept spare # MaxClients: maximum number of server processes allowed to start # MaxRequestsPerChild: maximum number of requests a server process serves <IfModule mpm_prefork_module> StartServers 5 MinSpareServers 5 MaxSpareServers 10 MaxClients 150 MaxRequestsPerChild 0 </IfModule> # worker MPM # StartServers: initial number of server processes to start # MaxClients: maximum number of simultaneous client connections # MinSpareThreads: minimum number of worker threads which are kept spare # MaxSpareThreads: maximum number of worker threads which are kept spare # ThreadsPerChild: constant number of worker threads in each server process # MaxRequestsPerChild: maximum number of requests a server process serves <IfModule mpm_worker_module> StartServers 2 MinSpareThreads 25 MaxSpareThreads 75 ThreadLimit 64 ThreadsPerChild 25 MaxClients 150 MaxRequestsPerChild 0 </IfModule> # event MPM # StartServers: initial number of server processes to start # MaxClients: maximum number of simultaneous client connections # MinSpareThreads: minimum number of worker threads which are kept spare # MaxSpareThreads: maximum number of worker threads which are kept spare # ThreadsPerChild: constant number of worker threads in each server process # MaxRequestsPerChild: maximum number of requests a server process serves <IfModule mpm_event_module> StartServers 2 MaxClients 150 MinSpareThreads 25 MaxSpareThreads 75 ThreadLimit 64 ThreadsPerChild 25 MaxRequestsPerChild 0 </IfModule> # These need to be set in /etc/apache2/envvars User ${APACHE_RUN_USER} Group ${APACHE_RUN_GROUP} # # AccessFileName: The name of the file to look for in each directory # for additional configuration directives. See also the AllowOverride # directive. # AccessFileName .htaccess # # The following lines prevent .htaccess and .htpasswd files from being # viewed by Web clients. # <Files ~ "^\.ht"> Order allow,deny Deny from all Satisfy all </Files> # # DefaultType is the default MIME type the server will use for a document # if it cannot otherwise determine one, such as from filename extensions. # If your server contains mostly text or HTML documents, "text/plain" is # a good value. If most of your content is binary, such as applications # or images, you may want to use "application/octet-stream" instead to # keep browsers from trying to display binary files as though they are # text. # DefaultType text/plain # # HostnameLookups: Log the names of clients or just their IP addresses # e.g., www.apache.org (on) or 204.62.129.132 (off). # The default is off because it'd be overall better for the net if people # had to knowingly turn this feature on, since enabling it means that # each client request will result in AT LEAST one lookup request to the # nameserver. # HostnameLookups Off # ErrorLog: The location of the error log file. # If you do not specify an ErrorLog directive within a <VirtualHost> # container, error messages relating to that virtual host will be # logged here. If you *do* define an error logfile for a <VirtualHost> # container, that host's errors will be logged there and not here. # ErrorLog /var/log/apache2/error.log # # LogLevel: Control the number of messages logged to the error_log. # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. # LogLevel warn # Include module configuration: Include /etc/apache2/mods-enabled/*.load Include /etc/apache2/mods-enabled/*.conf # Include all the user configurations: Include /etc/apache2/httpd.conf # Include ports listing Include /etc/apache2/ports.conf # # The following directives define some format nicknames for use with # a CustomLog directive (see below). # If you are behind a reverse proxy, you might want to change %h into %{X-Forwarded-For}i # LogFormat "%v:%p %h %l %u %t \"%r\" %>s %O \"%{Referer}i\" \"%{User-Agent}i\"" vhost_combined LogFormat "%h %l %u %t \"%r\" %>s %O \"%{Referer}i\" \"%{User-Agent}i\"" combined LogFormat "%h %l %u %t \"%r\" %>s %O" common LogFormat "%{Referer}i -> %U" referer LogFormat "%{User-agent}i" agent # # Define an access log for VirtualHosts that don't define their own logfile CustomLog /var/log/apache2/other_vhosts_access.log vhost_combined # Include of directories ignores editors' and dpkg's backup files, # see README.Debian for details. # Include generic snippets of statements Include /etc/apache2/conf.d/ # Include the virtual host configurations: Include /etc/apache2/sites-enabled/ what else do I need to do to fix it? Should I be telling apache to listen on 127.0.0.1:80, or isn't it already listening there?

Read the article

OpenVPN Client timing out

- by Austin

I recently installed OpenVPN on my Ubuntu VPS. Whenenver I try to connect to it, I can establish a connection just fine. However, everything I try to connect to times out. If I try to ping something, it will resolve the IP, but will time out after resolving the IP. (So DNS Server seems to be working correctly) My server.conf has this relevant information (At least I think it's relevant. I'm not sure if you need more or not) # Which local IP address should OpenVPN # listen on? (optional) ;local a.b.c.d # Which TCP/UDP port should OpenVPN listen on? # If you want to run multiple OpenVPN instances # on the same machine, use a different port # number for each one. You will need to # open up this port on your firewall. port 1194 # TCP or UDP server? ;proto tcp proto udp # "dev tun" will create a routed IP tunnel, # "dev tap" will create an ethernet tunnel. # Use "dev tap0" if you are ethernet bridging # and have precreated a tap0 virtual interface # and bridged it with your ethernet interface. # If you want to control access policies # over the VPN, you must create firewall # rules for the the TUN/TAP interface. # On non-Windows systems, you can give # an explicit unit number, such as tun0. # On Windows, use "dev-node" for this. # On most systems, the VPN will not function # unless you partially or fully disable # the firewall for the TUN/TAP interface. ;dev tap dev tun # Windows needs the TAP-Win32 adapter name # from the Network Connections panel if you # have more than one. On XP SP2 or higher, # you may need to selectively disable the # Windows firewall for the TAP adapter. # Non-Windows systems usually don't need this. ;dev-node MyTap # SSL/TLS root certificate (ca), certificate # (cert), and private key (key). Each client # and the server must have their own cert and # key file. The server and all clients will # use the same ca file. # # See the "easy-rsa" directory for a series # of scripts for generating RSA certificates # and private keys. Remember to use # a unique Common Name for the server # and each of the client certificates. # # Any X509 key management system can be used. # OpenVPN can also use a PKCS #12 formatted key file # (see "pkcs12" directive in man page). ca ca.crt cert server.crt key server.key # This file should be kept secret # Diffie hellman parameters. # Generate your own with: # openssl dhparam -out dh1024.pem 1024 # Substitute 2048 for 1024 if you are using # 2048 bit keys. dh dh1024.pem # Configure server mode and supply a VPN subnet # for OpenVPN to draw client addresses from. # The server will take 10.8.0.1 for itself, # the rest will be made available to clients. # Each client will be able to reach the server # on 10.8.0.1. Comment this line out if you are # ethernet bridging. See the man page for more info. server 10.8.0.0 255.255.255.0 # Maintain a record of client <-> virtual IP address # associations in this file. If OpenVPN goes down or # is restarted, reconnecting clients can be assigned # the same virtual IP address from the pool that was # previously assigned. ifconfig-pool-persist ipp.txt # Configure server mode for ethernet bridging. # You must first use your OS's bridging capability # to bridge the TAP interface with the ethernet # NIC interface. Then you must manually set the # IP/netmask on the bridge interface, here we # assume 10.8.0.4/255.255.255.0. Finally we # must set aside an IP range in this subnet # (start=10.8.0.50 end=10.8.0.100) to allocate # to connecting clients. Leave this line commented # out unless you are ethernet bridging. ;server-bridge 10.8.0.4 255.255.255.0 10.8.0.50 10.8.0.100 # Configure server mode for ethernet bridging # using a DHCP-proxy, where clients talk # to the OpenVPN server-side DHCP server # to receive their IP address allocation # and DNS server addresses. You must first use # your OS's bridging capability to bridge the TAP # interface with the ethernet NIC interface. # Note: this mode only works on clients (such as # Windows), where the client-side TAP adapter is # bound to a DHCP client. ;server-bridge # Push routes to the client to allow it # to reach other private subnets behind # the server. Remember that these # private subnets will also need # to know to route the OpenVPN client # address pool (10.8.0.0/255.255.255.0) # back to the OpenVPN server. ;push "route 192.168.10.0 255.255.255.0" ;push "route 192.168.20.0 255.255.255.0" # To assign specific IP addresses to specific # clients or if a connecting client has a private # subnet behind it that should also have VPN access, # use the subdirectory "ccd" for client-specific # configuration files (see man page for more info). # EXAMPLE: Suppose the client # having the certificate common name "Thelonious" # also has a small subnet behind his connecting # machine, such as 192.168.40.128/255.255.255.248. # First, uncomment out these lines: ;client-config-dir ccd ;route 192.168.40.128 255.255.255.248 # Then create a file ccd/Thelonious with this line: # iroute 192.168.40.128 255.255.255.248 # This will allow Thelonious' private subnet to # access the VPN. This example will only work # if you are routing, not bridging, i.e. you are # using "dev tun" and "server" directives. # EXAMPLE: Suppose you want to give # Thelonious a fixed VPN IP address of 10.9.0.1. # First uncomment out these lines: ;client-config-dir ccd ;route 10.9.0.0 255.255.255.252 # Then add this line to ccd/Thelonious: # ifconfig-push 10.9.0.1 10.9.0.2 # Suppose that you want to enable different # firewall access policies for different groups # of clients. There are two methods: # (1) Run multiple OpenVPN daemons, one for each # group, and firewall the TUN/TAP interface # for each group/daemon appropriately. # (2) (Advanced) Create a script to dynamically # modify the firewall in response to access # from different clients. See man # page for more info on learn-address script. ;learn-address ./script # If enabled, this directive will configure # all clients to redirect their default # network gateway through the VPN, causing # all IP traffic such as web browsing and # and DNS lookups to go through the VPN # (The OpenVPN server machine may need to NAT # or bridge the TUN/TAP interface to the internet # in order for this to work properly). push "redirect-gateway def1 bypass-dhcp" push "dhcp-option DNS 8.8.8.8" # Certain Windows-specific network settings # can be pushed to clients, such as DNS # or WINS server addresses. CAVEAT: # http://openvpn.net/faq.html#dhcpcaveats # The addresses below refer to the public # DNS servers provided by opendns.com. ;push "dhcp-option DNS 8.8.8.8" push "dhcp-option DNS 8.8.4.4" # Uncomment this directive to allow different # clients to be able to "see" each other. # By default, clients will only see the server. # To force clients to only see the server, you # will also need to appropriately firewall the # server's TUN/TAP interface. ;client-to-client # Uncomment this directive if multiple clients # might connect with the same certificate/key # files or common names. This is recommended # only for testing purposes. For production use, # each client should have its own certificate/key # pair. # # IF YOU HAVE NOT GENERATED INDIVIDUAL # CERTIFICATE/KEY PAIRS FOR EACH CLIENT, # EACH HAVING ITS OWN UNIQUE "COMMON NAME", # UNCOMMENT THIS LINE OUT. ;duplicate-cn # The keepalive directive causes ping-like # messages to be sent back and forth over # the link so that each side knows when # the other side has gone down. # Ping every 10 seconds, assume that remote # peer is down if no ping received during # a 120 second time period. keepalive 10 120 # For extra security beyond that provided # by SSL/TLS, create an "HMAC firewall" # to help block DoS attacks and UDP port flooding. # # Generate with: # openvpn --genkey --secret ta.key # # The server and each client must have # a copy of this key. # The second parameter should be '0' # on the server and '1' on the clients. ;tls-auth ta.key 0 # This file is secret # Select a cryptographic cipher. # This config item must be copied to # the client config file as well. ;cipher BF-CBC # Blowfish (default) ;cipher AES-128-CBC # AES ;cipher DES-EDE3-CBC # Triple-DES # Enable compression on the VPN link. # If you enable it here, you must also # enable it in the client config file. comp-lzo # The maximum number of concurrently connected # clients we want to allow. ;max-clients 100 # It's a good idea to reduce the OpenVPN # daemon's privileges after initialization. # # You can uncomment this out on # non-Windows systems. ;user nobody ;group nogroup # The persist options will try to avoid # accessing certain resources on restart # that may no longer be accessible because # of the privilege downgrade. persist-key persist-tun # Output a short status file showing # current connections, truncated # and rewritten every minute. status openvpn-status.log # By default, log messages will go to the syslog (or # on Windows, if running as a service, they will go to # the "\Program Files\OpenVPN\log" directory). # Use log or log-append to override this default. # "log" will truncate the log file on OpenVPN startup, # while "log-append" will append to it. Use one # or the other (but not both). ;log openvpn.log ;log-append openvpn.log # Set the appropriate level of log # file verbosity. # # 0 is silent, except for fatal errors # 4 is reasonable for general usage # 5 and 6 can help to debug connection problems # 9 is extremely verbose verb 3 # Silence repeating messages. At most 20 # sequential messages of the same message # category will be output to the log. ;mute 20 I've tried on multiple computers by the way. The same result on all of them. What could be wrong? Thanks in advance, and if you need other information I'll gladly post it. Information for new comments root@vps:~# iptables -L -n -v Chain INPUT (policy ACCEPT 862K packets, 51M bytes) pkts bytes target prot opt in out source destination Chain FORWARD (policy ACCEPT 3 packets, 382 bytes) pkts bytes target prot opt in out source destination 0 0 ACCEPT all -- * * 0.0.0.0/0 0.0.0.0/0 state RELATED,ESTABLISHED 4641 298K ACCEPT all -- * * 10.8.0.0/24 0.0.0.0/0 0 0 REJECT all -- * * 0.0.0.0/0 0.0.0.0/0 reject-with icmp-port-unreachable Chain OUTPUT (policy ACCEPT 1671K packets, 2378M bytes) pkts bytes target prot opt in out source destination And root@vps:~# iptables -t nat -L -n -v Chain PREROUTING (policy ACCEPT 17937 packets, 2013K bytes) pkts bytes target prot opt in out source destination Chain POSTROUTING (policy ACCEPT 8975 packets, 562K bytes) pkts bytes target prot opt in out source destination 1579 103K SNAT all -- * * 10.8.0.0/24 0.0.0.0/0 to:SERVERIP Chain OUTPUT (policy ACCEPT 8972 packets, 562K bytes) pkts bytes target prot opt in out source destination

Read the article

connecting to a network using route command

- by ami

I have a computer with an external IP(192.168.223.220) and also an internal address (10.1.1.20) in order to connect to some servers that don't have external addresses only 10.1.1.xx . in order to connect to these servers from other machines I used the following command "route ADD 10.1.1.0 MASK 255.255.255.0 192.168.223.220" and than I was able to connect to the servers using there 10.1.1.xx address. The problem is that the hard disk of main server(192.168.223.220) died and was replaced and after the that I am not able to connect to the servers as before, the route command succeeds and I can ping 10.1.1.20 but not the other servers. Thanks I am using Windows XP and the print outs are D:\AurosHome\Scriptsipconfig /all Windows IP Configuration Host Name . . . . . . . . . . . . : N100-master Primary Dns Suffix . . . . . . . : Node Type . . . . . . . . . . . . : Unknown IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : No Ethernet adapter Local Area Connection 3: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Intel(R) PRO/1000 EB Network Connection with I/O Acceleration #2 Physical Address. . . . . . . . . : 00-30-48-34-BA-B9 Dhcp Enabled. . . . . . . . . . . : No IP Address. . . . . . . . . . . . : 192.168.225.180 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : 192.168.225.254 DNS Servers . . . . . . . . . . . : 192.168.225.2 Ethernet adapter Local Area Connection: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Intel(R) PRO/1000 EB Network Connection with I/O Acceleration Physical Address. . . . . . . . . : 00-30-48-34-BA-B8 Dhcp Enabled. . . . . . . . . . . : No IP Address. . . . . . . . . . . . : 10.1.1.20 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : Ethernet adapter Local Area Connection 2: Media State . . . . . . . . . . . : Media disconnected Description . . . . . . . . . . . : Mellanox IPoIB Adapter Physical Address. . . . . . . . . : 00-02-C9-25-34-0D D:\AurosHome\Scriptsroute print Interface List 0x1 ........................... MS TCP Loopback interface 0x2 ...00 30 48 34 ba b9 ...... Intel(R) PRO/1000 EB Network Connection with I/O Acceleration #2 - Packet Sche duler Miniport 0x3 ...00 30 48 34 ba b8 ...... Intel(R) PRO/1000 EB Network Connection with I/O Acceleration - Packet Schedul er Miniport 0x10005 ...00 02 c9 25 34 0d ...... Mellanox IPoIB Adapter - Packet Scheduler Miniport =========================================================================== Active Routes: Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 192.168.225.254 192.168.225.180 10 10.1.1.0 255.255.255.0 10.1.1.20 10.1.1.20 10 10.1.1.20 255.255.255.255 127.0.0.1 127.0.0.1 10 10.255.255.255 255.255.255.255 10.1.1.20 10.1.1.20 10 127.0.0.0 255.0.0.0 127.0.0.1 127.0.0.1 1 192.168.225.0 255.255.255.0 192.168.225.180 192.168.225.180 10 192.168.225.180 255.255.255.255 127.0.0.1 127.0.0.1 10 192.168.225.255 255.255.255.255 192.168.225.180 192.168.225.180 10 224.0.0.0 240.0.0.0 10.1.1.20 10.1.1.20 10 224.0.0.0 240.0.0.0 192.168.225.180 192.168.225.180 10 255.255.255.255 255.255.255.255 10.1.1.20 10.1.1.20 1 255.255.255.255 255.255.255.255 10.1.1.20 10005 1 255.255.255.255 255.255.255.255 192.168.225.180 192.168.225.180 1 Default Gateway: 192.168.225.254 Persistent Routes: None

Read the article

ConfigurationManager.AppSettings is empty?

- by Mattousai

Hello All, I have a VS2008 ASP.NET Web Service Application running on the local IIS of my XP machine. A separate project in the same solution uses test methods to invoke the WS calls, and run their processes. When I added a web reference to the WS App, VS2008 created a Settings.settings file in the Properties folder to store the address of the web reference. This process also created a new section in the Web.config file called applicationSettings to store the values from Settings.settings When my application attempts to retrieve configuration values from the appSettings section of the Web.config file, via ConfigurationManager.AppSettings[key], all values are null and AppSettings.AllKeys.Length is always zero. I even reverted the Web.config file to before the web reference was added, and made sure it was exactly the same as a system-generated web.config file for a new project that works fine. After comparing the reverted Web.config and a new Web.config, I addded one simple value in the appSettings section, and still no luck with ConfigurationManager.AppSettings[key]. Here is the reverted Web.config that cannot be read from <?xml version="1.0"?> <configuration> <configSections> <sectionGroup name="system.web.extensions" type="System.Web.Configuration.SystemWebExtensionsSectionGroup, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"> <sectionGroup name="scripting" type="System.Web.Configuration.ScriptingSectionGroup, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"> <section name="scriptResourceHandler" type="System.Web.Configuration.ScriptingScriptResourceHandlerSection, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" requirePermission="false" allowDefinition="MachineToApplication"/> <sectionGroup name="webServices" type="System.Web.Configuration.ScriptingWebServicesSectionGroup, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"> <section name="jsonSerialization" type="System.Web.Configuration.ScriptingJsonSerializationSection, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" requirePermission="false" allowDefinition="Everywhere" /> <section name="profileService" type="System.Web.Configuration.ScriptingProfileServiceSection, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" requirePermission="false" allowDefinition="MachineToApplication" /> <section name="authenticationService" type="System.Web.Configuration.ScriptingAuthenticationServiceSection, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" requirePermission="false" allowDefinition="MachineToApplication" /> <section name="roleService" type="System.Web.Configuration.ScriptingRoleServiceSection, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" requirePermission="false" allowDefinition="MachineToApplication" /> </sectionGroup> </sectionGroup> </sectionGroup> </configSections> <appSettings> <add key="testkey" value="testvalue"/> </appSettings> <connectionStrings/> <system.web>  <compilation debug="false"> <assemblies> <add assembly="System.Core, Version=3.5.0.0, Culture=neutral, PublicKeyToken=B77A5C561934E089"/> <add assembly="System.Data.DataSetExtensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=B77A5C561934E089"/> <add assembly="System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/> <add assembly="System.Xml.Linq, Version=3.5.0.0, Culture=neutral, PublicKeyToken=B77A5C561934E089"/> </assemblies> </compilation>  <authentication mode="Windows" />  <pages> <controls> <add tagPrefix="asp" namespace="System.Web.UI" assembly="System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/> <add tagPrefix="asp" namespace="System.Web.UI.WebControls" assembly="System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/> </controls> </pages> <httpHandlers> <remove verb="*" path="*.asmx"/> <add verb="*" path="*.asmx" validate="false" type="System.Web.Script.Services.ScriptHandlerFactory, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/> <add verb="*" path="*_AppService.axd" validate="false" type="System.Web.Script.Services.ScriptHandlerFactory, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/> <add verb="GET,HEAD" path="ScriptResource.axd" type="System.Web.Handlers.ScriptResourceHandler, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" validate="false"/> </httpHandlers> <httpModules> <add name="ScriptModule" type="System.Web.Handlers.ScriptModule, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/> </httpModules> </system.web> <system.codedom> <compilers> <compiler language="c#;cs;csharp" extension=".cs" warningLevel="4" type="Microsoft.CSharp.CSharpCodeProvider, System, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089"> <providerOption name="CompilerVersion" value="v3.5"/> <providerOption name="WarnAsError" value="false"/> </compiler> </compilers> </system.codedom>  <system.webServer> <validation validateIntegratedModeConfiguration="false"/> <modules> <remove name="ScriptModule" /> <add name="ScriptModule" preCondition="managedHandler" type="System.Web.Handlers.ScriptModule, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/> </modules> <handlers> <remove name="WebServiceHandlerFactory-Integrated"/> <remove name="ScriptHandlerFactory" /> <remove name="ScriptHandlerFactoryAppServices" /> <remove name="ScriptResource" /> <add name="ScriptHandlerFactory" verb="*" path="*.asmx" preCondition="integratedMode" type="System.Web.Script.Services.ScriptHandlerFactory, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/> <add name="ScriptHandlerFactoryAppServices" verb="*" path="*_AppService.axd" preCondition="integratedMode" type="System.Web.Script.Services.ScriptHandlerFactory, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/> <add name="ScriptResource" preCondition="integratedMode" verb="GET,HEAD" path="ScriptResource.axd" type="System.Web.Handlers.ScriptResourceHandler, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" /> </handlers> </system.webServer> <runtime> <assemblyBinding xmlns="urn:schemas-microsoft-com:asm.v1"> <dependentAssembly> <assemblyIdentity name="System.Web.Extensions" publicKeyToken="31bf3856ad364e35"/> <bindingRedirect oldVersion="1.0.0.0-1.1.0.0" newVersion="3.5.0.0"/> </dependentAssembly> <dependentAssembly> <assemblyIdentity name="System.Web.Extensions.Design" publicKeyToken="31bf3856ad364e35"/> <bindingRedirect oldVersion="1.0.0.0-1.1.0.0" newVersion="3.5.0.0"/> </dependentAssembly> </assemblyBinding> </runtime> </configuration> Has anyone experienced this, or know how to solve the problem? TIA -Matt

Read the article

XSLT big integer (int64) handling msxml

- by Farid Z

When trying to do math on an big integer (int64) large number in xslt template I get the wrong result since there is no native 64-bit integer support in xslt (xslt number is 64-bit double). I am using msxml 6.0 on Windows XP SP3. Are there any work around for this on Windows? <tables> <table> <table_schem>REPADMIN</table_schem> <table_name>TEST_DESCEND_IDENTITY_BIGINT</table_name> <column> <col_name>COL1</col_name> <identity> <col_min_val>9223372036854775805</col_min_val> <col_max_val>9223372036854775805</col_max_val> <autoincrementvalue>9223372036854775807</autoincrementvalue> <autoincrementstart>9223372036854775807</autoincrementstart> <autoincrementinc>-1</autoincrementinc> </identity> </column> </table> </tables> This test returns true due to overflow (I am assuming) but actually is false if I could tell the xslt processor somehow to use int64 rather than the default 64-bit double for the data since big integer is the actual data type for the numbers in the xml input. <xsl:when test="autoincrementvalue = (col_min_val + autoincrementinc)"> <xsl:value-of select="''"/> </xsl:when> here is the complete template <xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform" >  <xsl:output omit-xml-declaration='yes' method='text' /> <xsl:param name="stmtsep">;</xsl:param> <xsl:param name="schemprefix"></xsl:param> <xsl:template match="tables"> <xsl:variable name="identitycount" select="count(table/column/identity)"></xsl:variable> <xsl:for-each select="table/column/identity"> <xsl:variable name="table_schem" select="../../table_schem"></xsl:variable> <xsl:variable name="table_name" select="../../table_name"></xsl:variable> <xsl:variable name="tablespec"> <xsl:if test="$schemprefix"> <xsl:value-of select="$table_schem"/>.</xsl:if><xsl:value-of select="$table_name"/></xsl:variable> <xsl:variable name="col_name" select="../col_name"></xsl:variable> <xsl:variable name="newstart"> <xsl:choose> <xsl:when test="autoincrementinc > 0"> <xsl:choose> <xsl:when test="col_max_val = '' and autoincrementvalue = autoincrementstart"> <xsl:value-of select="''"/> </xsl:when> <xsl:when test="col_max_val = ''"> <xsl:value-of select="autoincrementstart"/> </xsl:when> <xsl:when test="autoincrementvalue = (col_max_val + autoincrementinc)"> <xsl:value-of select="''"/> </xsl:when> <xsl:when test="(col_max_val + autoincrementinc) < autoincrementstart"> <xsl:value-of select="autoincrementstart"/> </xsl:when> <xsl:otherwise> <xsl:value-of select="col_max_val + autoincrementinc"/> </xsl:otherwise> </xsl:choose> </xsl:when> <xsl:when test="autoincrementinc < 0"> <xsl:choose> <xsl:when test="col_min_val = '' and autoincrementvalue = autoincrementstart"> <xsl:value-of select="''"/> </xsl:when> <xsl:when test="col_min_val = ''"> <xsl:value-of select="autoincrementstart"/> </xsl:when> <xsl:when test="autoincrementvalue = (col_min_val + autoincrementinc)"> <xsl:value-of select="''"/> </xsl:when> <xsl:when test="(col_min_val + autoincrementinc) > autoincrementstart"> <xsl:value-of select="autoincrementstart"/> </xsl:when> <xsl:otherwise> <xsl:value-of select="col_min_val + autoincrementinc"/> </xsl:otherwise> </xsl:choose> </xsl:when> </xsl:choose> </xsl:variable> <xsl:if test="not(position()=1)"><xsl:text> </xsl:text></xsl:if> <xsl:choose>  <xsl:when test="$newstart != '' and $newstart != autoincrementvalue">alter table <xsl:value-of select="$tablespec"/> alter column <xsl:value-of select="$col_name"/> restart with <xsl:value-of select="$newstart"/><xsl:if test="$identitycount>1">;</xsl:if></xsl:when> <xsl:otherwise>-- reseed <xsl:value-of select="$tablespec"/> is not necessary</xsl:otherwise> </xsl:choose> </xsl:for-each> </xsl:template> </xsl:stylesheet>

Read the article

JBoss AS 5: starts but can't connect (Windows, remote)

- by Nuwan

Hello I installed Jboss 5.0GA and Its works fine in localhost.But I want It to access through remote Machine.Then I bind my IP address to my server and started it.This is the command I used run.bat -b 10.17.62.63 Then the server Starts fine This is the console log when starting the server > =============================================================================== > > JBoss Bootstrap Environment > > JBOSS_HOME: C:\jboss-5.0.0.GA > > JAVA: C:\Program Files\Java\jdk1.6.0_34\bin\java > > JAVA_OPTS: -Dprogram.name=run.bat -server -Xms128m -Xmx512m > -XX:MaxPermSize=25 6m -Dorg.jboss.resolver.warning=true -Dsun.rmi.dgc.client.gcInterval=3600000 -Ds un.rmi.dgc.server.gcInterval=3600000 > > CLASSPATH: C:\jboss-5.0.0.GA\bin\run.jar > > =============================================================================== > > run.bat: unused non-option argument: ûb run.bat: unused non-option > argument: 0.0.0.0 13:43:38,179 INFO [ServerImpl] Starting JBoss > (Microcontainer)... 13:43:38,179 INFO [ServerImpl] Release ID: JBoss > [Morpheus] 5.0.0.GA (build: SV NTag=JBoss_5_0_0_GA date=200812041714) > 13:43:38,179 INFO [ServerImpl] Bootstrap URL: null 13:43:38,179 INFO > [ServerImpl] Home Dir: C:\jboss-5.0.0.GA 13:43:38,179 INFO > [ServerImpl] Home URL: file:/C:/jboss-5.0.0.GA/ 13:43:38,195 INFO > [ServerImpl] Library URL: file:/C:/jboss-5.0.0.GA/lib/ 13:43:38,195 > INFO [ServerImpl] Patch URL: null 13:43:38,195 INFO [ServerImpl] > Common Base URL: file:/C:/jboss-5.0.0.GA/common/ > > 13:43:38,195 INFO [ServerImpl] Common Library URL: > file:/C:/jboss-5.0.0.GA/comm on/lib/ 13:43:38,195 INFO [ServerImpl] > Server Name: default 13:43:38,195 INFO [ServerImpl] Server Base Dir: > C:\jboss-5.0.0.GA\server 13:43:38,195 INFO [ServerImpl] Server Base > URL: file:/C:/jboss-5.0.0.GA/server/ > > 13:43:38,210 INFO [ServerImpl] Server Config URL: > file:/C:/jboss-5.0.0.GA/serve r/default/conf/ 13:43:38,210 INFO > [ServerImpl] Server Home Dir: C:\jboss-5.0.0.GA\server\defaul t > 13:43:38,210 INFO [ServerImpl] Server Home URL: > file:/C:/jboss-5.0.0.GA/server/ default/ 13:43:38,210 INFO > [ServerImpl] Server Data Dir: C:\jboss-5.0.0.GA\server\defaul t\data > 13:43:38,210 INFO [ServerImpl] Server Library URL: > file:/C:/jboss-5.0.0.GA/serv er/default/lib/ 13:43:38,210 INFO > [ServerImpl] Server Log Dir: C:\jboss-5.0.0.GA\server\default \log > 13:43:38,210 INFO [ServerImpl] Server Native Dir: > C:\jboss-5.0.0.GA\server\defa ult\tmp\native 13:43:38,210 INFO > [ServerImpl] Server Temp Dir: C:\jboss-5.0.0.GA\server\defaul t\tmp > 13:43:38,210 INFO [ServerImpl] Server Temp Deploy Dir: > C:\jboss-5.0.0.GA\server \default\tmp\deploy 13:43:39,710 INFO > [ServerImpl] Starting Microcontainer, bootstrapURL=file:/C:/j > boss-5.0.0.GA/server/default/conf/bootstrap.xml 13:43:40,851 INFO > [VFSCacheFactory] Initializing VFSCache [org.jboss.virtual.pl > ugins.cache.IterableTimedVFSCache] 13:43:40,866 INFO > [VFSCacheFactory] Using VFSCache [IterableTimedVFSCache{lifet > ime=1800, resolution=60}] 13:43:41,616 INFO [CopyMechanism] VFS temp > dir: C:\jboss-5.0.0.GA\server\defaul t\tmp 13:43:41,648 INFO > [ZipEntryContext] VFS force nested jars copy-mode is enabled. > > 13:43:44,288 INFO [ServerInfo] Java version: 1.6.0_34,Sun > Microsystems Inc. 13:43:44,288 INFO [ServerInfo] Java VM: Java > HotSpot(TM) Server VM 20.9-b04,Sun Microsystems Inc. 13:43:44,288 > INFO [ServerInfo] OS-System: Windows XP 5.1,x86 13:43:44,569 INFO > [JMXKernel] Legacy JMX core initialized 13:43:50,148 INFO > [ProfileServiceImpl] Loading profile: default from: org.jboss > .system.server.profileservice.repository.SerializableDeploymentRepository@e72f0c > (root=C:\jboss-5.0.0.GA\server, > key=org.jboss.profileservice.spi.ProfileKey@143b > 82c3[domain=default,server=default,name=default]) 13:43:50,148 INFO > [ProfileImpl] Using repository:org.jboss.system.server.profil > eservice.repository.SerializableDeploymentRepository@e72f0c(root=C:\jboss-5.0.0. > GA\server, > key=org.jboss.profileservice.spi.ProfileKey@143b82c3[domain=default,s > erver=default,name=default]) 13:43:50,148 INFO [ProfileServiceImpl] > Loaded profile: ProfileImpl@8b3bb3{key=o > rg.jboss.profileservice.spi.ProfileKey@143b82c3[domain=default,server=default,na > me=default]} 13:43:54,804 INFO [WebService] Using RMI server > codebase: http://127.0.0.1:8083 / 13:44:12,147 INFO [CXFServerConfig] > JBoss Web Services - Stack CXF Runtime Serv er 13:44:12,147 INFO > [CXFServerConfig] 3.1.2.GA 13:44:29,788 INFO > [Ejb3DependenciesDeployer] Encountered deployment AbstractVFS > DeploymentContext@29776073{vfszip:/C:/jboss-5.0.0.GA/server/default/deploy/myE-e > jb.jar} 13:44:29,819 INFO [Ejb3DependenciesDeployer] Encountered > deployment AbstractVFS > DeploymentContext@29776073{vfszip:/C:/jboss-5.0.0.GA/server/default/deploy/myE-e > jb.jar} 13:44:29,819 INFO [Ejb3DependenciesDeployer] Encountered > deployment AbstractVFS > DeploymentContext@29776073{vfszip:/C:/jboss-5.0.0.GA/server/default/deploy/myE-e > jb.jar} 13:44:29,819 INFO [Ejb3DependenciesDeployer] Encountered > deployment AbstractVFS > DeploymentContext@29776073{vfszip:/C:/jboss-5.0.0.GA/server/default/deploy/myE-e > jb.jar} 13:44:37,116 INFO [JMXConnectorServerService] JMX Connector > server: service:jmx > :rmi://127.0.0.1/jndi/rmi://127.0.0.1:1090/jmxconnector 13:44:38,022 > INFO [MailService] Mail Service bound to java:/Mail 13:44:43,162 WARN > [JBossASSecurityMetadataStore] WARNING! POTENTIAL SECURITY RI SK. It > has been detected that the MessageSucker component which sucks > messages f rom one node to another has not had its password changed > from the installation d efault. Please see the JBoss Messaging user > guide for instructions on how to do this. 13:44:43,209 WARN > [AnnotationCreator] No ClassLoader provided, using TCCL: org. > jboss.managed.api.annotation.ManagementComponent 13:44:43,600 INFO > [TransactionManagerService] JBossTS Transaction Service (JTA version) > - JBoss Inc. 13:44:43,600 INFO [TransactionManagerService] Setting up property manager MBean and JMX layer 13:44:44,366 INFO > [TransactionManagerService] Initializing recovery manager 13:44:44,678 > INFO [TransactionManagerService] Recovery manager configured > 13:44:44,678 INFO [TransactionManagerService] Binding > TransactionManager JNDI R eference 13:44:44,787 INFO > [TransactionManagerService] Starting transaction recovery man ager > 13:44:46,428 INFO [Http11Protocol] Initializing Coyote HTTP/1.1 on > http-127.0.0 .1-8080 13:44:46,459 INFO [AjpProtocol] Initializing > Coyote AJP/1.3 on ajp-127.0.0.1-80 09 13:44:46,459 INFO > [StandardService] Starting service jboss.web 13:44:46,475 INFO > [StandardEngine] Starting Servlet Engine: JBoss Web/2.1.1.GA > 13:44:46,616 INFO [Catalina] Server startup in 350 ms 13:44:46,709 > INFO [TomcatDeployment] deploy, ctxPath=/web-console, vfsUrl=manag > ement/console-mgr.sar/web-console.war 13:44:48,553 INFO > [TomcatDeployment] deploy, ctxPath=/juddi, vfsUrl=juddi-servi > ce.sar/juddi.war 13:44:48,678 INFO [RegistryServlet] Loading jUDDI > configuration. 13:44:48,694 INFO [RegistryServlet] Resources loaded > from: /WEB-INF/juddi.prope rties 13:44:48,709 INFO [RegistryServlet] > Initializing jUDDI components. 13:44:48,991 INFO [TomcatDeployment] > deploy, ctxPath=/invoker, vfsUrl=http-invo ker.sar/invoker.war > 13:44:49,162 INFO [TomcatDeployment] deploy, ctxPath=/jbossws, > vfsUrl=jbossws.s ar/jbossws-management.war 13:44:49,475 INFO > [RARDeployment] Required license terms exist, view vfszip:/C: > /jboss-5.0.0.GA/server/default/deploy/jboss-local-jdbc.rar/META-INF/ra.xml > 13:44:49,569 INFO [RARDeployment] Required license terms exist, view > vfszip:/C: > /jboss-5.0.0.GA/server/default/deploy/jboss-xa-jdbc.rar/META-INF/ra.xml > 13:44:49,741 INFO [RARDeployment] Required license terms exist, view > vfszip:/C: > /jboss-5.0.0.GA/server/default/deploy/jms-ra.rar/META-INF/ra.xml > 13:44:49,819 INFO [RARDeployment] Required license terms exist, view > vfszip:/C: > /jboss-5.0.0.GA/server/default/deploy/mail-ra.rar/META-INF/ra.xml > 13:44:49,912 INFO [RARDeployment] Required license terms exist, view > vfszip:/C: > /jboss-5.0.0.GA/server/default/deploy/quartz-ra.rar/META-INF/ra.xml > 13:44:50,069 INFO [SimpleThreadPool] Job execution threads will use > class loade r of thread: main 13:44:50,115 INFO [QuartzScheduler] > Quartz Scheduler v.1.5.2 created. 13:44:50,131 INFO [RAMJobStore] > RAMJobStore initialized. 13:44:50,131 INFO [StdSchedulerFactory] > Quartz scheduler 'DefaultQuartzSchedule r' initialized from default > resource file in Quartz package: 'quartz.properties' > > 13:44:50,131 INFO [StdSchedulerFactory] Quartz scheduler version: > 1.5.2 13:44:50,131 INFO [QuartzScheduler] Scheduler DefaultQuartzScheduler_$_NON_CLUS TERED started. 13:44:51,194 INFO > [ConnectionFactoryBindingService] Bound ConnectionManager 'jb > oss.jca:service=DataSourceBinding,name=DefaultDS' to JNDI name > 'java:DefaultDS' 13:44:51,819 WARN [QuartzTimerServiceFactory] sql > failed: CREATE TABLE QRTZ_JOB > _DETAILS(JOB_NAME VARCHAR(80) NOT NULL, JOB_GROUP VARCHAR(80) NOT NULL, DESCRIPT ION VARCHAR(120) NULL, JOB_CLASS_NAME VARCHAR(128) NOT > NULL, IS_DURABLE VARCHAR( 1) NOT NULL, IS_VOLATILE VARCHAR(1) NOT > NULL, IS_STATEFUL VARCHAR(1) NOT NULL, R EQUESTS_RECOVERY VARCHAR(1) > NOT NULL, JOB_DATA BINARY NULL, PRIMARY KEY (JOB_NAM E,JOB_GROUP)) > 13:44:51,912 INFO [SimpleThreadPool] Job execution threads will use > class loade r of thread: main 13:44:51,928 INFO [QuartzScheduler] > Quartz Scheduler v.1.5.2 created. 13:44:51,928 INFO [JobStoreCMT] > Using db table-based data access locking (synch ronization). > 13:44:51,944 INFO [JobStoreCMT] Removed 0 Volatile Trigger(s). > 13:44:51,944 INFO [JobStoreCMT] Removed 0 Volatile Job(s). > 13:44:51,944 INFO [JobStoreCMT] JobStoreCMT initialized. 13:44:51,944 > INFO [StdSchedulerFactory] Quartz scheduler 'JBossEJB3QuartzSchedu > ler' initialized from an externally provided properties instance. > 13:44:51,959 INFO [StdSchedulerFactory] Quartz scheduler version: > 1.5.2 13:44:51,959 INFO [JobStoreCMT] Freed 0 triggers from 'acquired' / 'blocked' st ate. 13:44:51,975 INFO [JobStoreCMT] > Recovering 0 jobs that were in-progress at the time of the last > shut-down. 13:44:51,975 INFO [JobStoreCMT] Recovery complete. > 13:44:51,975 INFO [JobStoreCMT] Removed 0 'complete' triggers. > 13:44:51,975 INFO [JobStoreCMT] Removed 0 stale fired job entries. > 13:44:51,990 INFO [QuartzScheduler] Scheduler > JBossEJB3QuartzScheduler_$_NON_CL USTERED started. 13:44:52,381 INFO > [ServerPeer] JBoss Messaging 1.4.1.GA server [0] started 13:44:52,569 > INFO [QueueService] Queue[/queue/DLQ] started, fullSize=200000, pa > geSize=2000, downCacheSize=2000 13:44:52,584 INFO [QueueService] > Queue[/queue/ExpiryQueue] started, fullSize=20 0000, pageSize=2000, > downCacheSize=2000 13:44:52,709 INFO [ConnectionFactory] Connector > bisocket://127.0.0.1:4457 has l easing enabled, lease period 10000 > milliseconds 13:44:52,709 INFO [ConnectionFactory] > org.jboss.jms.server.connectionfactory.Co nnectionFactory@1a8ac5e > started 13:44:52,725 WARN [ConnectionFactoryJNDIMapper] > supportsFailover attribute is t rue on connection factory: > jboss.messaging.connectionfactory:service=ClusteredCo nnectionFactory > but post office is non clustered. So connection factory will *no t* > support failover 13:44:52,725 WARN [ConnectionFactoryJNDIMapper] > supportsLoadBalancing attribute is true on connection factory: > jboss.messaging.connectionfactory:service=Cluste redConnectionFactory > but post office is non clustered. So connection factory wil l *not* > support load balancing 13:44:52,740 INFO [ConnectionFactory] > Connector bisocket://127.0.0.1:4457 has l easing enabled, lease period > 10000 milliseconds 13:44:52,740 INFO [ConnectionFactory] > org.jboss.jms.server.connectionfactory.Co nnectionFactory@1d43178 > started 13:44:52,740 INFO [ConnectionFactory] Connector > bisocket://127.0.0.1:4457 has l easing enabled, lease period 10000 > milliseconds 13:44:52,756 INFO [ConnectionFactory] > org.jboss.jms.server.connectionfactory.Co nnectionFactory@52728a > started 13:44:53,084 INFO [ConnectionFactoryBindingService] Bound > ConnectionManager 'jb > oss.jca:service=ConnectionFactoryBinding,name=JmsXA' to JNDI name > 'java:JmsXA' 13:44:53,225 INFO [TomcatDeployment] deploy, ctxPath=/, > vfsUrl=ROOT.war 13:44:53,553 INFO [TomcatDeployment] deploy, > ctxPath=/jmx-console, vfsUrl=jmx-c onsole.war 13:44:53,975 INFO > [TomcatDeployment] deploy, ctxPath=/TestService, vfsUrl=TestS > erviceEAR.ear/TestService.war 13:44:55,662 INFO [JBossASKernel] > Created KernelDeployment for: myE-ejb.jar 13:44:55,709 INFO > [JBossASKernel] installing bean: jboss.j2ee:jar=myE-ejb.jar,n > ame=RPSService,service=EJB3 13:44:55,725 INFO [JBossASKernel] with > dependencies: 13:44:55,725 INFO [JBossASKernel] and demands: > 13:44:55,725 INFO [JBossASKernel] > jboss.ejb:service=EJBTimerService 13:44:55,725 INFO [JBossASKernel] > and supplies: 13:44:55,725 INFO [JBossASKernel] > jndi:RPSService/remote 13:44:55,725 INFO [JBossASKernel] Added > bean(jboss.j2ee:jar=myE-ejb.jar,name=RP SService,service=EJB3) to > KernelDeployment of: myE-ejb.jar 13:44:56,772 INFO > [SessionSpecContainer] Starting jboss.j2ee:jar=myE-ejb.jar,na > me=RPSService,service=EJB3 13:44:56,803 INFO [EJBContainer] STARTED > EJB: com.monz.rpz.RPSService ejbName: RPSService 13:44:56,819 INFO > [JndiSessionRegistrarBase] Binding the following Entries in G lobal > JNDI: > > > 13:44:57,381 INFO [DefaultEndpointRegistry] register: > jboss.ws:context=myE-ejb, endpoint=RPSService 13:44:57,428 INFO > [DescriptorDeploymentAspect] Add Service id=RPSService > address=http://127.0.0.1:8080/myE-ejb/RPSService > implementor=com.monz.rpz.RPSService > invoker=org.jboss.wsf.stack.cxf.InvokerEJB3 mtomEnabled=false > 13:44:57,459 INFO [DescriptorDeploymentAspect] JBossWS-CXF > configuration genera ted: > file:/C:/jboss-5.0.0.GA/server/default/tmp/jbossws/jbossws-cxf1864137209199 > 110130.xml 13:44:57,569 INFO [TomcatDeployment] deploy, ctxPath=/myE-ejb, vfsUrl=myE-ejb.j ar 13:44:57,709 WARN [config] > Unable to process deployment descriptor for context '/myE-ejb' > 13:44:59,334 INFO [Http11Protocol] Starting Coyote HTTP/1.1 on > http-127.0.0.1-8 080 13:44:59,397 INFO [AjpProtocol] Starting Coyote > AJP/1.3 on ajp-127.0.0.1-8009 13:44:59,459 INFO [ServerImpl] JBoss > (Microcontainer) [5.0.0.GA (build: SVNTag= JBoss_5_0_0_GA > date=200812041714)] Started in 1m:21s:233ms But Still I cant connect to It when I Type my IP address in my browser thanks

Read the article

Why is my router not routing?

- by dwj

Starting a week and half ago my router stopped working with my cable modem. I went to sleep with it working and woke up with it not. I swapped in another router and am still having issues; I was gone for 10 days so now I'm back to trying to figure it out. While I was gone I left everything (cable modem, router, and computer) powered off. My setup: Comcast Ambit cable modem (from Comcast) Netgear WGR614 v4 router -- replaced with Linksys WRT54GS v1.1 Windows XP SP3 other computers, all currently unplugged The modem is using the firmware (ver 2.105.2001) provided by Comcast; hardware version 1.3 The Linksys router is using FW ver 4.71.4 (latest for this release of HW), factory defaults I am only using the wired connections; no wireless. I have swapped out all of the cat5 cable. If I plug my computer directly into the cable modem, I can ping by name or number. Everything works perfectly. If I plug my computer into the router and the router into the modem, I cannot access anything outside of my local network. This is the exact setup I've used for the past 5 years; there were no changes in the past year. Now here's the interesting part: I can log into the Linksys router and get status information from it; everything appears good. Using the Diagnostics, I can run ping and traceroute to any site on the internet. These work perfectly. From my computer, I can ping the router and the modem. However, I cannot ping anything on the internet by with name or number. If I plug in another computer, I can ping it successfully. I've included two transcripts below that show these two attempts. Addresses, DNS, gateways, etc. look good. I cannot access the internet through either router. I am at a loss here. Suggestions? Help! Computer to Router to Cable Modem C:\ipconfig /renew Windows IP Configuration No operation can be performed on Bluetooth Network while it has its media disconnected. Ethernet adapter Local Area Connection: Connection-specific DNS Suffix . : hsd1.ca.comcast.net. IP Address. . . . . . . . . . . . : 192.168.1.100 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : 192.168.1.1 Ethernet adapter Bluetooth Network: Media State . . . . . . . . . . . : Media disconnected C:\ipconfig /all Windows IP Configuration Host Name . . . . . . . . . . . . : wynton Primary Dns Suffix . . . . . . . : Node Type . . . . . . . . . . . . : Unknown IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : No DNS Suffix Search List. . . . . . : hsd1.ca.comcast.net. Ethernet adapter Local Area Connection: Connection-specific DNS Suffix . : hsd1.ca.comcast.net. Description . . . . . . . . . . . : Intel(R) 82562V-2 10/100 Network Connection Physical Address. . . . . . . . . : 00-1D-09-9B-45-EB Dhcp Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes IP Address. . . . . . . . . . . . : 192.168.1.100 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : 192.168.1.1 DHCP Server . . . . . . . . . . . : 192.168.1.1 DNS Servers . . . . . . . . . . . : 68.87.76.178 68.87.78.130 Lease Obtained. . . . . . . . . . : Monday, March 22, 2010 10:21:55 PM Lease Expires . . . . . . . . . . : Tuesday, March 23, 2010 10:21:55 PM Ethernet adapter Bluetooth Network: Media State . . . . . . . . . . . : Media disconnected Description . . . . . . . . . . . : Bluetooth LAN Access Server Driver Physical Address. . . . . . . . . : 00-0A-3A-6F-68-41 C:\ping google.com Ping request could not find host google.com. Please check the name and try again . C:\ping 74.125.19.104 Pinging 74.125.19.104 with 32 bytes of data: Request timed out. Request timed out. Request timed out. Request timed out. Ping statistics for 74.125.19.104: Packets: Sent = 4, Received = 0, Lost = 4 (100% loss), C:\ Computer to Cable Modem Directly C:\ipconfig /renew Windows IP Configuration No operation can be performed on Bluetooth Network while it has its media disconnected. Ethernet adapter Local Area Connection: Connection-specific DNS Suffix . : hsd1.ca.comcast.net. IP Address. . . . . . . . . . . . : 71.204.149.195 Subnet Mask . . . . . . . . . . . : 255.255.252.0 Default Gateway . . . . . . . . . : 71.204.148.1 Ethernet adapter Bluetooth Network: Media State . . . . . . . . . . . : Media disconnected C:\ipconfig /all Windows IP Configuration Host Name . . . . . . . . . . . . : wynton Primary Dns Suffix . . . . . . . : Node Type . . . . . . . . . . . . : Unknown IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : No DNS Suffix Search List. . . . . . : hsd1.ca.comcast.net. Ethernet adapter Local Area Connection: Connection-specific DNS Suffix . : hsd1.ca.comcast.net. Description . . . . . . . . . . . : Intel(R) 82562V-2 10/100 Network Connection Physical Address. . . . . . . . . : 00-1D-09-9B-45-EB Dhcp Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes IP Address. . . . . . . . . . . . : 71.204.149.195 Subnet Mask . . . . . . . . . . . : 255.255.252.0 Default Gateway . . . . . . . . . : 71.204.148.1 DHCP Server . . . . . . . . . . . : 68.87.76.10 DNS Servers . . . . . . . . . . . : 68.87.76.178 68.87.78.130 Lease Obtained. . . . . . . . . . : Monday, March 22, 2010 10:18:50 PM Lease Expires . . . . . . . . . . : Monday, March 22, 2010 11:12:31 PM Ethernet adapter Bluetooth Network: Media State . . . . . . . . . . . : Media disconnected Description . . . . . . . . . . . : Bluetooth LAN Access Server Driver Physical Address. . . . . . . . . : 00-0A-3A-6F-68-41 C:\ping google.com Pinging google.com [74.125.19.99] with 32 bytes of data: Reply from 74.125.19.99: bytes=32 time=20ms TTL=55 Reply from 74.125.19.99: bytes=32 time=17ms TTL=55 Reply from 74.125.19.99: bytes=32 time=28ms TTL=55 Reply from 74.125.19.99: bytes=32 time=18ms TTL=55 Ping statistics for 74.125.19.99: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 17ms, Maximum = 28ms, Average = 20ms C:\ping 74.125.19.104 Pinging 74.125.19.104 with 32 bytes of data: Reply from 74.125.19.104: bytes=32 time=18ms TTL=55 Reply from 74.125.19.104: bytes=32 time=18ms TTL=55 Reply from 74.125.19.104: bytes=32 time=17ms TTL=55 Reply from 74.125.19.104: bytes=32 time=16ms TTL=55 Ping statistics for 74.125.19.104: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 16ms, Maximum = 18ms, Average = 17ms C:\

Read the article

Ping "replies" from same computer with 'Destination host unreachable' (no route to other computer)

- by Srekel

I've got two computers in a LAN behind a wireless router. One has XP with ip 192.168.1.2 This one has W7 with ip 192.168.1.7 If I try to ping the other one from this computer, I get this: C:\Users\Srekel>ping 192.168.1.2 Pinging 192.168.1.2 with 32 bytes of data: Reply from 192.168.1.7: Destination host unreachable. Reply from 192.168.1.7: Destination host unreachable. Reply from 192.168.1.7: Destination host unreachable. Reply from 192.168.1.7: Destination host unreachable. Ping statistics for 192.168.1.2: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Tracert gives the same result: C:\Users\Srekel>tracert 192.168.1.2 Tracing route to 192.168.1.2 over a maximum of 30 hops 1 Kakburken4 [192.168.1.7] reports: Destination host unreachable. Trace complete. Although I can ping and tracert the router without any problems. I have disabled the firewalls on both computers. The router is set to use DHCP (if that matters). Here is the output from "route". C:\Users\Srekel>route print =========================================================================== Interface List 13...00 25 86 df c6 89 ......TP-LINK Wireless N Adapter 12...e0 cb 4e 26 b9 84 ......Realtek PCIe GBE Family Controller #2 11...e0 cb 4e 26 be 94 ......Realtek PCIe GBE Family Controller 1...........................Software Loopback Interface 1 16...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter #2 14...00 00 00 00 00 00 00 e0 Teredo Tunneling Pseudo-Interface =========================================================================== IPv4 Route Table =========================================================================== Active Routes: Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 192.168.1.1 192.168.1.7 20 127.0.0.0 255.0.0.0 On-link 127.0.0.1 306 127.0.0.1 255.255.255.255 On-link 127.0.0.1 306 127.255.255.255 255.255.255.255 On-link 127.0.0.1 306 192.168.1.0 255.255.255.0 On-link 192.168.1.7 276 192.168.1.7 255.255.255.255 On-link 192.168.1.7 276 192.168.1.255 255.255.255.255 On-link 192.168.1.7 276 224.0.0.0 240.0.0.0 On-link 127.0.0.1 306 224.0.0.0 240.0.0.0 On-link 192.168.1.7 276 255.255.255.255 255.255.255.255 On-link 127.0.0.1 306 255.255.255.255 255.255.255.255 On-link 192.168.1.7 276 =========================================================================== Persistent Routes: None IPv6 Route Table =========================================================================== Active Routes: If Metric Network Destination Gateway 14 58 ::/0 On-link 1 306 ::1/128 On-link 14 58 2001::/32 On-link 14 306 2001:0:5ef5:73ba:881:20c1:3f57:fef8/128 On-link 14 306 fe80::/64 On-link 14 306 fe80::881:20c1:3f57:fef8/128 On-link 1 306 ff00::/8 On-link 14 306 ff00::/8 On-link =========================================================================== Persistent Routes: None I've set up and debugged a few networks in my life but I'm not really an advanced network user, so I'm not sure what might be wrong. Any ideas? Oh, and pinging this computer from the other computer doesn't work either. EDIT: Adding arp output: C:\Users\Srekel>arp -a Interface: 192.168.1.7 --- 0xd Internet Address Physical Address Type 192.168.1.1 00-1f-33-ef-28-01 dynamic 192.168.1.255 ff-ff-ff-ff-ff-ff static 224.0.0.22 01-00-5e-00-00-16 static 224.0.0.252 01-00-5e-00-00-fc static 239.255.255.250 01-00-5e-7f-ff-fa static 255.255.255.255 ff-ff-ff-ff-ff-ff static Adding ipconfig... C:\Users\Srekel>ipconfig /all Windows IP Configuration Host Name . . . . . . . . . . . . : Kakburken4 Primary Dns Suffix . . . . . . . : Node Type . . . . . . . . . . . . : Hybrid IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : No Wireless LAN adapter Wireless Network Connection: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : TP-LINK Wireless N Adapter Physical Address. . . . . . . . . : 00-25-86-DF-C6-89 DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes IPv4 Address. . . . . . . . . . . : 192.168.1.7(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 Lease Obtained. . . . . . . . . . : 09 April 2010 23:09:45 Lease Expires . . . . . . . . . . : 10 April 2010 23:09:45 Default Gateway . . . . . . . . . : 192.168.1.1 DHCP Server . . . . . . . . . . . : 192.168.1.1 DNS Servers . . . . . . . . . . . : 192.168.1.1 NetBIOS over Tcpip. . . . . . . . : Enabled Ethernet adapter Local Area Connection 2: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Realtek PCIe GBE Family Controller #2 Physical Address. . . . . . . . . : E0-CB-4E-26-B9-84 DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes Ethernet adapter Local Area Connection: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Realtek PCIe GBE Family Controller Physical Address. . . . . . . . . : E0-CB-4E-26-BE-94 DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes Tunnel adapter isatap.{74D5C406-894E-4000-8DE7-6AAEBF7C8382}: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Microsoft ISATAP Adapter #2 Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0 DHCP Enabled. . . . . . . . . . . : No Autoconfiguration Enabled . . . . : Yes Tunnel adapter Teredo Tunneling Pseudo-Interface: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0 DHCP Enabled. . . . . . . . . . . : No Autoconfiguration Enabled . . . . : Yes IPv6 Address. . . . . . . . . . . : 2001:0:5ef5:73ba:881:20c1:3f57:fef8(Preferred) Link-local IPv6 Address . . . . . : fe80::881:20c1:3f57:fef8%14(Preferred) Default Gateway . . . . . . . . . : :: NetBIOS over Tcpip. . . . . . . . : Disabled

Read the article

Joining Windows 7 Professional to a Windows Server 2003 R2 x64 domain fails.

- by Vinko Vrsalovic

I have a windows 7 professional (spanish) laptop trying to join a Windows Server 2003 (english) domain. It detect correctly the SRV record, finding the proper domain controller, but then the join fails with the error message (snippet, because the error is in spanish) An Active Directory Domain Controller for This Domain Could Not be Contacted The DNS is correctly set, and client can ping by name and IP the server, the server can ping the client by IP. I've tested with the FW down to no avail. A host of other XP Pro clients are connected to the domain. I've restarted Net Logon and checked that Windows Time is up. Also the times are in sync between the server and the client. I'll put below diagnostics output. I'm wondering if there's anything special to be done on either the server or the client to have a Win 7 Pro join a 2k3 R2 domain. The following diagnostic information follows: netdiag /q for the DC dcdiag on the DC ipconfig /all on the Win 7 client netdiag /q on the DC: .................................. Computer Name: HI-X2 DNS Host Name: hi-x2.hi.local System info : Microsoft Windows Server 2003 R2 (Build 3790) Processor : EM64T Family 6 Model 23 Stepping 10, GenuineIntel List of installed hotfixes : KB923561 KB924667-v2 KB925398_WMP64 KB925902 KB926122 KB927891 KB929123 KB930178 KB932168 KB936357 KB938127 KB941569 KB942830 KB942831 KB943055 KB943460 KB944338-v2 KB944653 KB945553 KB946026 KB948496 KB950760 KB950762 KB950974 KB951066 KB951748 KB952004 KB952069 KB952954 KB954155 KB954550-v7 KB955069 KB955759 KB956572 KB956802 KB956803 KB956844 KB958469 KB958644 KB958869 KB959426 KB960225 KB960803 KB960859 KB961063 KB961118 KB961501 KB967715 KB967723 KB968389 KB968816 KB969059 KB969947 KB970238 KB970430 KB970483 KB971032 KB971468 KB971657 KB971737 KB971961 KB971961-IE8 KB972270 KB973037 KB973354 KB973507 KB973540 KB973687 KB973815 KB973825 KB973869 KB973904 KB973917-v2 KB974112 KB974318 KB974392 KB974571 KB975025 KB975467 KB975560 KB975713 KB976662-IE8 KB977290 KB977816 KB977914 KB978037 KB978262 KB978338 KB978542 KB978601 KB978706 KB979306 KB979309 KB979683 KB980182 KB980182-IE8 KB980232 KB980302-IE8 KB981332-IE8 KB981350 Q147222 Per interface results: Adapter : Local Area Connection Host Name. . . . . . . . . : hi-x2.hi.local IP Address . . . . . . . . : 10.0.1.199 Subnet Mask. . . . . . . . : 255.0.0.0 Default Gateway. . . . . . : 10.0.1.1 Dns Servers. . . . . . . . : 10.0.1.199 WINS service test. . . . . : Skipped Global results: [WARNING] You don't have a single interface with the 'WorkStation Service', 'Messenger Service', 'WINS' names defined. DNS test . . . . . . . . . . . . . : Passed PASS - All the DNS entries for DC are registered on DNS server '10.0.1.199'. IP Security test . . . . . . . . . : Skipped The command completed successfully dcdiag on the DC: Domain Controller Diagnosis Performing initial setup: Done gathering initial info. Doing initial required tests Testing server: Default-First-Site-Name\HI-X2 Starting test: Connectivity ......................... HI-X2 passed test Connectivity Doing primary tests Testing server: Default-First-Site-Name\HI-X2 Starting test: Replications ......................... HI-X2 passed test Replications Starting test: NCSecDesc ......................... HI-X2 passed test NCSecDesc Starting test: NetLogons ......................... HI-X2 passed test NetLogons Starting test: Advertising ......................... HI-X2 passed test Advertising Starting test: KnowsOfRoleHolders ......................... HI-X2 passed test KnowsOfRoleHolders Starting test: RidManager ......................... HI-X2 passed test RidManager Starting test: MachineAccount ......................... HI-X2 passed test MachineAccount Starting test: Services ......................... HI-X2 passed test Services Starting test: ObjectsReplicated ......................... HI-X2 passed test ObjectsReplicated Starting test: frssysvol ......................... HI-X2 passed test frssysvol Starting test: frsevent ......................... HI-X2 passed test frsevent Starting test: kccevent ......................... HI-X2 passed test kccevent Starting test: systemlog ......................... HI-X2 passed test systemlog Starting test: VerifyReferences ......................... HI-X2 passed test VerifyReferences Running partition tests on : ForestDnsZones Starting test: CrossRefValidation ......................... ForestDnsZones passed test CrossRefValidation Starting test: CheckSDRefDom ......................... ForestDnsZones passed test CheckSDRefDom Running partition tests on : DomainDnsZones Starting test: CrossRefValidation ......................... DomainDnsZones passed test CrossRefValidation Starting test: CheckSDRefDom ......................... DomainDnsZones passed test CheckSDRefDom Running partition tests on : Schema Starting test: CrossRefValidation ......................... Schema passed test CrossRefValidation Starting test: CheckSDRefDom ......................... Schema passed test CheckSDRefDom Running partition tests on : Configuration Starting test: CrossRefValidation ......................... Configuration passed test CrossRefValidation Starting test: CheckSDRefDom ......................... Configuration passed test CheckSDRefDom Running partition tests on : hi Starting test: CrossRefValidation ......................... hi passed test CrossRefValidation Starting test: CheckSDRefDom ......................... hi passed test CheckSDRefDom Running enterprise tests on : hi.local Starting test: Intersite ......................... hi.local passed test Intersite Starting test: FsmoCheck ......................... hi.local passed test FsmoCheck ipconfig /all on the Windows 7 client: Configuraci¢n IP de Windows Nombre de host. . . . . . . . . : hi-p6 Sufijo DNS principal . . . . . : Tipo de nodo. . . . . . . . . . : h¡brido Enrutamiento IP habilitado. . . : no Proxy WINS habilitado . . . . . : no Adaptador de LAN inal mbrica Conexi¢n de red inal mbrica: Sufijo DNS espec¡fico para la conexi¢n. . : Descripci¢n . . . . . . . . . . . . . . . : Intel(R) WiFi Link 5100 AGN Direcci¢n f¡sica. . . . . . . . . . . . . : 00-22-FB-63-47-A0 DHCP habilitado . . . . . . . . . . . . . : no Configuraci¢n autom tica habilitada . . . : s¡ Direcci¢n IPv4. . . . . . . . . . . . . . : 10.0.1.42(Preferido) M scara de subred . . . . . . . . . . . . : 255.255.255.0 Puerta de enlace predeterminada . . . . . : 10.0.1.1 Servidores DNS. . . . . . . . . . . . . . : 10.0.1.199 NetBIOS sobre TCP/IP. . . . . . . . . . . : habilitado Adaptador de Ethernet Conexi¢n de rea local: Estado de los medios. . . . . . . . . . . : medios desconectados Sufijo DNS espec¡fico para la conexi¢n. . : Descripci¢n . . . . . . . . . . . . . . . : Realtek PCIe GBE Family Controller Direcci¢n f¡sica. . . . . . . . . . . . . : 00-1E-33-1F-35-B1 DHCP habilitado . . . . . . . . . . . . . : s¡ Configuraci¢n autom tica habilitada . . . : s¡ Adaptador de t£nel isatap.{8926581E-09AC-4123-906B-DA6386AD2D60}: Estado de los medios. . . . . . . . . . . : medios desconectados Sufijo DNS espec¡fico para la conexi¢n. . : Descripci¢n . . . . . . . . . . . . . . . : Adaptador ISATAP de Microsoft Direcci¢n f¡sica. . . . . . . . . . . . . : 00-00-00-00-00-00-00-E0 DHCP habilitado . . . . . . . . . . . . . : no Configuraci¢n autom tica habilitada . . . : s¡ Adaptador de t£nel Teredo Tunneling Pseudo-Interface: Sufijo DNS espec¡fico para la conexi¢n. . : Descripci¢n . . . . . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface Direcci¢n f¡sica. . . . . . . . . . . . . : 00-00-00-00-00-00-00-E0 DHCP habilitado . . . . . . . . . . . . . : no Configuraci¢n autom tica habilitada . . . : s¡ Direcci¢n IPv6 . . . . . . . . . . : 2001:0:5ef5:73ba:1cec:3883:f5ff:fed5(Preferido) V¡nculo: direcci¢n IPv6 local. . . : fe80::1cec:3883:f5ff:fed5%13(Preferido) Puerta de enlace predeterminada . . . . . : :: NetBIOS sobre TCP/IP. . . . . . . . . . . : deshabilitado

Read the article

Problem interfacing GSM USB modem to Java application

- by varun

I am working on an open-source application called FrontlineSMS which can be interfaced with GSM modems to send and receive SMS. The windows installer that is available through their website works fine. Since i wanted to modify it, I got the source code and built the jar and tried to launch it. When I plug in the GSM modem and launch the application, it sometimes detects the GSM device and i am even able to send and receive SMS. Or else 1.) I get the following error- Launching FrontlineSMS for Windows... Stable Library ========================================= Native lib Version = RXTX-2.1-7 Java lib Version = RXTX-2.1-7 Error 0x5 at /home/bob/foo/rxtx-devel/build/../src/termios.c(860): Access is de ied. Error 0x57 at /home/bob/foo/rxtx-devel/build/../src/termios.c(2352): The parame er is incorrect. Error 0x57 at /home/bob/foo/rxtx-devel/build/../src/termios.c(2352): The parame er is incorrect. Error 0x57 at /home/bob/foo/rxtx-devel/build/../src/termios.c(2352): The parame er is incorrect. Error 0x57 at /home/bob/foo/rxtx-devel/build/../src/termios.c(2352): The parame er is incorrect. Error 0x57 at /home/bob/foo/rxtx-devel/build/../src/termios.c(2352): The parame er is incorrect. Error 0x57 at /home/bob/foo/rxtx-devel/build/../src/termios.c(2352): The parame er is incorrect. Error 0x57 at /home/bob/foo/rxtx-devel/build/../src/termios.c(2352): The parame er is incorrect. Error 0x57 at /home/bob/foo/rxtx-devel/build/../src/termios.c(2352): The parame er is incorrect. Error 0x57 at /home/bob/foo/rxtx-devel/build/../src/termios.c(2352): The parame er is incorrect. Error 0x57 at /home/bob/foo/rxtx-devel/build/../src/termios.c(2352): The parame er is incorrect. Error 0x5 at /home/bob/foo/rxtx-devel/build/../src/termios.c(860): Access is de ied. Error 0x57 at /home/bob/foo/rxtx-devel/build/../src/termios.c(2352): The parame er is incorrect. Error 0x57 at /home/bob/foo/rxtx-devel/build/../src/termios.c(2352): The parame er is incorrect. Error 0x57 at /home/bob/foo/rxtx-devel/build/../src/termios.c(2352): The parame er is incorrect. Error 0x57 at /home/bob/foo/rxtx-devel/build/../src/termios.c(2352): The parame er is incorrect. Error 0x57 at /home/bob/foo/rxtx-devel/build/../src/termios.c(2352): The parame er is incorrect. Error 0x57 at /home/bob/foo/rxtx-devel/build/../src/termios.c(2352): The parame er is incorrect. Error 0x57 at /home/bob/foo/rxtx-devel/build/../src/termios.c(2352): The parame er is incorrect. Error 0x1 at /home/bob/foo/rxtx-devel/build/../src/termios.c(2497): Incorrect f nction. Error 0x1 at /home/bob/foo/rxtx-devel/build/../src/termios.c(2497): Incorrect f nction. Error 0x1 at /home/bob/foo/rxtx-devel/build/../src/termios.c(2497): Incorrect f nction. Error 0x1 at /home/bob/foo/rxtx-devel/build/../src/termios.c(2497): Incorrect f nction. Error 0x1 at /home/bob/foo/rxtx-devel/build/../src/termios.c(2497): Incorrect f nction. Error 0x1 at /home/bob/foo/rxtx-devel/build/../src/termios.c(2497): Incorrect f nction. Error 0x1 at /home/bob/foo/rxtx-devel/build/../src/termios.c(2497): Incorrect f nction. 2.) OR the application sometimes crashes by creating a log file which contains: # # A fatal error has been detected by the Java Runtime Environment: # # EXCEPTION_ACCESS_VIOLATION (0xc0000005) at pc=0x10009ccb, pid=4452, tid=3464 # # JRE version: 6.0_20-b02 # Java VM: Java HotSpot(TM) Client VM (16.3-b01 mixed mode, sharing windows-x86 ) # Problematic frame: # C [rxtxSerial.dll+0x9ccb] # # If you would like to submit a bug report, please visit: # http://java.sun.com/webapps/bugreport/crash.jsp # The crash happened outside the Java Virtual Machine in native code. # See problematic frame for where to report the bug. # --------------- T H R E A D --------------- Current thread (0x03433000): JavaThread "SmsModem :: COM18" daemon [_thread_in_native, id=3464, stack(0x070a0000,0x070f0000)] siginfo: ExceptionCode=0xc0000005, writing address 0x038cfa10 Registers: EAX=0x038cfa08, EBX=0x00000003, ECX=0x7c802413, EDX=0x00000001 ESP=0x070ef800, EBP=0x070ef9e8, ESI=0x3360b898, EDI=0x03433000 EIP=0x10009ccb, EFLAGS=0x00010202 Top of Stack: (sp=0x070ef800) 0x070ef800: 3360b8a0 6d9fbc40 6da2ed98 ffffffff 0x070ef810: 070ef848 6d8f0a2c 6d8f0340 070ef95c 0x070ef820: 070ef864 00000dfb 03433000 038cfa08 0x070ef830: 00000007 00000001 00000001 0000000a 0x070ef840: 03433bf4 fffffffe 070ef8f4 6d8f0b7a 0x070ef850: 070ef95c 03433bf8 6da6f210 6da6f538 0x070ef860: 070ef868 03433bf4 27f18708 27f18708 0x070ef870: 22eb9810 03433bc4 00000001 070ef898 Instructions: (pc=0x10009ccb) 0x10009cbb: 45 1c 7c 19 8b 85 44 fe ff ff 8b 95 4c fe ff ff 0x10009ccb: 89 50 08 8b 55 f4 89 d0 e9 f8 01 00 00 c7 85 50 Stack: [0x070a0000,0x070f0000], sp=0x070ef800, free space=13e070ef334k Native frames: (J=compiled Java code, j=interpreted, Vv=VM code, C=native code) C [rxtxSerial.dll+0x9ccb] C [rxtxSerial.dll+0xa05e] j gnu.io.RXTXPort.readByte()I+0 j gnu.io.RXTXPort$SerialInputStream.read()I+61 j org.smslib.CSerialDriver.getResponse()Ljava/lang/String;+36 j net.frontlinesms.smsdevice.SmsModem._doDetection()Z+172 j net.frontlinesms.smsdevice.SmsModem.run()V+18 v ~StubRoutines::call_stub V [jvm.dll+0xf049c] V [jvm.dll+0x17fcf1] V [jvm.dll+0xf0667] V [jvm.dll+0xf06dd] V [jvm.dll+0x11a2a0] V [jvm.dll+0x1ddb14] V [jvm.dll+0x17f96c] C [msvcr71.dll+0x9565] C [kernel32.dll+0xb729] Java frames: (J=compiled Java code, j=interpreted, Vv=VM code) j gnu.io.RXTXPort.readByte()I+0 j gnu.io.RXTXPort$SerialInputStream.read()I+61 j org.smslib.CSerialDriver.getResponse()Ljava/lang/String;+36 j net.frontlinesms.smsdevice.SmsModem._doDetection()Z+172 j net.frontlinesms.smsdevice.SmsModem.run()V+18 v ~StubRoutines::call_stub --------------- P R O C E S S --------------- Java Threads: ( => current thread ) =>0x03433000 JavaThread "SmsModem :: COM18" daemon [_thread_in_native, id=3464, stack(0x070a0000,0x070f0000)] 0x0344b800 JavaThread "D3D Screen Updater" daemon [_thread_blocked, id=4404, stack(0x03dd0000,0x03e20000)] 0x002b7800 JavaThread "DestroyJavaVM" [_thread_blocked, id=3236, stack(0x008c0000,0x00910000)] 0x03f6f400 JavaThread "AWT-EventQueue-0" [_thread_blocked, id=1888, stack(0x038e0000,0x03930000)] 0x03ec2400 JavaThread "AWT-Shutdown" [_thread_blocked, id=4300, stack(0x03740000,0x03790000)] 0x032d8c00 JavaThread "EmailServerHandler" [_thread_blocked, id=5708, stack(0x03830000,0x03880000)] 0x032f7000 JavaThread "Incoming message processor" [_thread_blocked, id=4184, stack(0x03650000,0x036a0000)] 0x03004c00 JavaThread "AWT-Windows" daemon [_thread_in_native, id=4828, stack(0x035a0000,0x035f0000)] 0x0303f400 JavaThread "Java2D Disposer" daemon [_thread_blocked, id=3768, stack(0x03500000,0x03550000)] 0x02b1e800 JavaThread "Low Memory Detector" daemon [_thread_blocked, id=4164, stack(0x02dd0000,0x02e20000)] 0x02b18c00 JavaThread "CompilerThread0" daemon [_thread_blocked, id=2936, stack(0x02d80000,0x02dd0000)] 0x02b17400 JavaThread "Attach Listener" daemon [_thread_blocked, id=5444, stack(0x02d30000,0x02d80000)] 0x02b15c00 JavaThread "Signal Dispatcher" daemon [_thread_blocked, id=4976, stack(0x02ce0000,0x02d30000)] 0x02b0d800 JavaThread "Finalizer" daemon [_thread_blocked, id=5876, stack(0x02c90000,0x02ce0000)] 0x02b0c400 JavaThread "Reference Handler" daemon [_thread_blocked, id=5984, stack(0x02c40000,0x02c90000)] Other Threads: 0x02b0ac00 VMThread [stack: 0x02bf0000,0x02c40000] [id=4508] 0x02b29800 WatcherThread [stack: 0x02e20000,0x02e70000] [id=6080] VM state:not at safepoint (normal execution) VM Mutex/Monitor currently owned by a thread: None Heap def new generation total 7808K, used 4003K [0x22990000, 0x23200000, 0x27ee0000) eden space 6976K, 45% used [0x22990000, 0x22ca8e90, 0x23060000) from space 832K, 100% used [0x23060000, 0x23130000, 0x23130000) to space 832K, 0% used [0x23130000, 0x23130000, 0x23200000) tenured generation total 17208K, used 15192K [0x27ee0000, 0x28fae000, 0x32990000) the space 17208K, 88% used [0x27ee0000, 0x28db6100, 0x28db6200, 0x28fae000) compacting perm gen total 13824K, used 13655K [0x32990000, 0x33710000, 0x36990000) the space 13824K, 98% used [0x32990000, 0x336e5f98, 0x336e6000, 0x33710000) ro space 10240K, 51% used [0x36990000, 0x36ebae00, 0x36ebae00, 0x37390000) rw space 12288K, 54% used [0x37390000, 0x37a272d8, 0x37a27400, 0x37f90000) Dynamic libraries: 0x00400000 - 0x00424000 C:\WINDOWS\system32\java.exe 0x7c900000 - 0x7c9b2000 C:\WINDOWS\system32\ntdll.dll 0x7c800000 - 0x7c8f6000 C:\WINDOWS\system32\kernel32.dll 0x77dd0000 - 0x77e6b000 C:\WINDOWS\system32\ADVAPI32.dll 0x77e70000 - 0x77f02000 C:\WINDOWS\system32\RPCRT4.dll 0x77fe0000 - 0x77ff1000 C:\WINDOWS\system32\Secur32.dll 0x7c340000 - 0x7c396000 C:\Program Files\Java\jre6\bin\msvcr71.dll 0x6d800000 - 0x6da97000 C:\Program Files\Java\jre6\bin\client\jvm.dll 0x7e410000 - 0x7e4a1000 C:\WINDOWS\system32\USER32.dll 0x77f10000 - 0x77f59000 C:\WINDOWS\system32\GDI32.dll 0x76b40000 - 0x76b6d000 C:\WINDOWS\system32\WINMM.dll 0x76390000 - 0x763ad000 C:\WINDOWS\system32\IMM32.DLL 0x6d7b0000 - 0x6d7bc000 C:\Program Files\Java\jre6\bin\verify.dll 0x6d330000 - 0x6d34f000 C:\Program Files\Java\jre6\bin\java.dll 0x6d290000 - 0x6d298000 C:\Program Files\Java\jre6\bin\hpi.dll 0x76bf0000 - 0x76bfb000 C:\WINDOWS\system32\PSAPI.DLL 0x6d7f0000 - 0x6d7ff000 C:\Program Files\Java\jre6\bin\zip.dll 0x6d000000 - 0x6d14a000 C:\Program Files\Java\jre6\bin\awt.dll 0x73000000 - 0x73026000 C:\WINDOWS\system32\WINSPOOL.DRV 0x77c10000 - 0x77c68000 C:\WINDOWS\system32\msvcrt.dll 0x774e0000 - 0x7761d000 C:\WINDOWS\system32\ole32.dll 0x773d0000 - 0x774d3000 C:\WINDOWS\WinSxS\x86_Microsoft.Windows.Common-Controls_6595b64144ccf1df_6.0.2600.5512_x-ww_35d4ce83\COMCTL32.dll 0x77f60000 - 0x77fd6000 C:\WINDOWS\system32\SHLWAPI.dll 0x5ad70000 - 0x5ada8000 C:\WINDOWS\system32\uxtheme.dll 0x74720000 - 0x7476c000 C:\WINDOWS\system32\MSCTF.dll 0x755c0000 - 0x755ee000 C:\WINDOWS\system32\msctfime.ime 0x7c9c0000 - 0x7d1d7000 C:\WINDOWS\system32\shell32.dll 0x6d230000 - 0x6d284000 C:\Program Files\Java\jre6\bin\fontmanager.dll 0x68000000 - 0x68036000 C:\WINDOWS\system32\rsaenh.dll 0x769c0000 - 0x76a74000 C:\WINDOWS\system32\USERENV.dll 0x5b860000 - 0x5b8b5000 C:\WINDOWS\system32\netapi32.dll 0x6d610000 - 0x6d623000 C:\Program Files\Java\jre6\bin\net.dll 0x71ab0000 - 0x71ac7000 C:\WINDOWS\system32\WS2_32.dll 0x71aa0000 - 0x71aa8000 C:\WINDOWS\system32\WS2HELP.dll 0x71a50000 - 0x71a8f000 C:\WINDOWS\System32\mswsock.dll 0x76f20000 - 0x76f47000 C:\WINDOWS\system32\DNSAPI.dll 0x76fb0000 - 0x76fb8000 C:\WINDOWS\System32\winrnr.dll 0x76f60000 - 0x76f8c000 C:\WINDOWS\system32\WLDAP32.dll 0x16080000 - 0x160a5000 C:\Program Files\Bonjour\mdnsNSP.dll 0x76d60000 - 0x76d79000 C:\WINDOWS\system32\Iphlpapi.dll 0x63560000 - 0x63568000 C:\Program Files\National Instruments\Shared\mDNS Responder\nimdnsNSP.dll 0x63550000 - 0x63559000 C:\WINDOWS\system32\nimdnsResponder.dll 0x78130000 - 0x781cb000 C:\WINDOWS\WinSxS\x86_Microsoft.VC80.CRT_1fc8b3b9a1e18e3b_8.0.50727.4053_x-ww_e6967989\MSVCR80.dll 0x76fc0000 - 0x76fc6000 C:\WINDOWS\system32\rasadhlp.dll 0x10000000 - 0x10012000 C:\Documents and Settings\bjz677\Desktop\client run\rxtxSerial.dll 0x73d90000 - 0x73db7000 C:\WINDOWS\system32\crtdll.dll 0x4fdd0000 - 0x4ff76000 C:\WINDOWS\system32\d3d9.dll 0x038d0000 - 0x038d6000 C:\WINDOWS\system32\d3d8thk.dll 0x77c00000 - 0x77c08000 C:\WINDOWS\system32\VERSION.dll 0x6d630000 - 0x6d639000 C:\Program Files\Java\jre6\bin\nio.dll 0x03930000 - 0x03977000 C:\Program Files\Iomega\DriveIcons\IMGHOOK.DLL 0x605d0000 - 0x605d9000 C:\WINDOWS\system32\mslbui.dll 0x77120000 - 0x771ab000 C:\WINDOWS\system32\OLEAUT32.DLL VM Arguments: java_command: net.frontlinesms.DesktopLauncher Launcher Type: SUN_STANDARD Environment Variables: JAVA_HOME=C:\Program Files\Java\jdk1.6.0_20\bin CLASSPATH=.;C:\Program Files\Java\jre6\lib\ext\QTJava.zip; PATH=C:\Program Files\Intel\MKL\10.0.2.019\ia32\bin;C:\Program Files\Intel\VTune\CGGlbCache;C:\Program Files\Intel\VTune\Analyzer\Bin;C:\Program Files\Intel\VTune\Shared\Bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;s:\datamart\bin;C:\Program Files\ATI Technologies\ATI.ACE\;C:\Program Files\IVI\bin;c:\Program Files\Microsoft SQL Server\90\Tools\binn\;C:\Program Files\MATLAB\R2007b\bin;C:\Program Files\MATLAB\R2007b\bin\win32;C:\VXIPNP\WinNT\Bin;C:\Program Files\Intel\Compiler\Fortran\10.1.021\\IA32\Lib;C:\Program Files\Intel\Compiler\Fortran\10.1.021\\EM64T\Lib;C:\VXIPNP\WinNT\Bin\;C:\WINDOWS\system32\WindowsPowerShell\v1.0;C:\WINDOWS\system32\WindowsPowerShell\v1.0;C:\Program Files\QuickTime\QTSystem\;C:\Program Files\Java\jdk1.6.0_20\bin USERNAME=xxx OS=Windows_NT PROCESSOR_IDENTIFIER=x86 Family 6 Model 15 Stepping 2, GenuineIntel --------------- S Y S T E M --------------- OS: Windows XP Build 2600 Service Pack 3 CPU:total 2 (2 cores per cpu, 1 threads per core) family 6 model 15 stepping 2, cmov, cx8, fxsr, mmx, sse, sse2, sse3, ssse3 Memory: 4k page, physical 2094960k(1063364k free), swap 4032536k(3038408k free) vm_info: Java HotSpot(TM) Client VM (16.3-b01) for windows-x86 JRE (1.6.0_20-b02), built on Apr 12 2010 13:52:23 by "java_re" with MS VC++ 7.1 (VS2003) time: Wed Jun 16 11:53:40 2010 elapsed time: 45 seconds Anyone knows what caused this? Please answer keeping in mind I am new to Java. Thanks, Varun

Read the article

RuntimeError: maximum recursion depth exceeded while calling a Python object

- by Bilal Basharat

this error arises when i try to run the following test case which is written in models.py of my django app named 'administration' : from django.test import Client, TestCase from django.core import mail class ClientTest( TestCase ): fixtures = [ 'testdata.json' ] def test_get_register( self ): response = self.client.get( '/accounts/register/', {} ) self.assertEqual( response.status_code, 200 ) the error arises at this line specifically: response = self.client.get( '/accounts/register/', {} ) my django version is 1.2.1 and python 2.6 and satchmo version is 0.9.2-pre hg-unknown. I code in windows platform(xp sp2). The command to run test case is: python manage.py test administration the complete error log is as follow: site = by_host(host = 'www.%s' % host, id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 121, in by_host site = by_host(host=host[4:], id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 124, in by_host site = by_host(host = 'www.%s' % host, id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 121, in by_host site = by_host(host=host[4:], id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 124, in by_host site = by_host(host = 'www.%s' % host, id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 121, in by_host site = by_host(host=host[4:], id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 124, in by_host site = by_host(host = 'www.%s' % host, id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 121, in by_host site = by_host(host=host[4:], id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 124, in by_host site = by_host(host = 'www.%s' % host, id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 121, in by_host site = by_host(host=host[4:], id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 124, in by_host site = by_host(host = 'www.%s' % host, id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 121, in by_host site = by_host(host=host[4:], id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 124, in by_host site = by_host(host = 'www.%s' % host, id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 121, in by_host site = by_host(host=host[4:], id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 124, in by_host site = by_host(host = 'www.%s' % host, id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 121, in by_host site = by_host(host=host[4:], id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 124, in by_host site = by_host(host = 'www.%s' % host, id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 121, in by_host site = by_host(host=host[4:], id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 124, in by_host site = by_host(host = 'www.%s' % host, id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 121, in by_host site = by_host(host=host[4:], id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 124, in by_host site = by_host(host = 'www.%s' % host, id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 121, in by_host site = by_host(host=host[4:], id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 124, in by_host site = by_host(host = 'www.%s' % host, id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 121, in by_host site = by_host(host=host[4:], id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 124, in by_host site = by_host(host = 'www.%s' % host, id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 121, in by_host site = by_host(host=host[4:], id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 124, in by_host site = by_host(host = 'www.%s' % host, id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 121, in by_host site = by_host(host=host[4:], id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 124, in by_host site = by_host(host = 'www.%s' % host, id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 121, in by_host site = by_host(host=host[4:], id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 124, in by_host site = by_host(host = 'www.%s' % host, id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 121, in by_host site = by_host(host=host[4:], id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 124, in by_host site = by_host(host = 'www.%s' % host, id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 121, in by_host site = by_host(host=host[4:], id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 124, in by_host site = by_host(host = 'www.%s' % host, id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 121, in by_host site = by_host(host=host[4:], id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 124, in by_host site = by_host(host = 'www.%s' % host, id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 121, in by_host site = by_host(host=host[4:], id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 124, in by_host site = by_host(host = 'www.%s' % host, id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 121, in by_host site = by_host(host=host[4:], id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 124, in by_host site = by_host(host = 'www.%s' % host, id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 121, in by_host site = by_host(host=host[4:], id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 124, in by_host site = by_host(host = 'www.%s' % host, id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 121, in by_host site = by_host(host=host[4:], id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 124, in by_host site = by_host(host = 'www.%s' % host, id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 121, in by_host site = by_host(host=host[4:], id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 124, in by_host site = by_host(host = 'www.%s' % host, id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 121, in by_host site = by_host(host=host[4:], id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 124, in by_host site = by_host(host = 'www.%s' % host, id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 121, in by_host site = by_host(host=host[4:], id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 124, in by_host site = by_host(host = 'www.%s' % host, id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 121, in by_host site = by_host(host=host[4:], id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 124, in by_host site = by_host(host = 'www.%s' % host, id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 121, in by_host site = by_host(host=host[4:], id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 124, in by_host site = by_host(host = 'www.%s' % host, id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 121, in by_host site = by_host(host=host[4:], id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 124, in by_host site = by_host(host = 'www.%s' % host, id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 121, in by_host site = by_host(host=host[4:], id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 124, in by_host site = by_host(host = 'www.%s' % host, id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 121, in by_host site = by_host(host=host[4:], id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 124, in by_host site = by_host(host = 'www.%s' % host, id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 121, in by_host site = by_host(host=host[4:], id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 124, in by_host site = by_host(host = 'www.%s' % host, id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 121, in by_host site = by_host(host=host[4:], id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 124, in by_host site = by_host(host = 'www.%s' % host, id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 121, in by_host site = by_host(host=host[4:], id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 124, in by_host site = by_host(host = 'www.%s' % host, id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 121, in by_host site = by_host(host=host[4:], id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 124, in by_host site = by_host(host = 'www.%s' % host, id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 121, in by_host site = by_host(host=host[4:], id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 124, in by_host site = by_host(host = 'www.%s' % host, id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 121, in by_host site = by_host(host=host[4:], id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 124, in by_host site = by_host(host = 'www.%s' % host, id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 121, in by_host site = by_host(host=host[4:], id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 124, in by_host site = by_host(host = 'www.%s' % host, id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 121, in by_host site = by_host(host=host[4:], id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 124, in by_host site = by_host(host = 'www.%s' % host, id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 121, in by_host site = by_host(host=host[4:], id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 124, in by_host site = by_host(host = 'www.%s' % host, id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 121, in by_host site = by_host(host=host[4:], id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 124, in by_host site = by_host(host = 'www.%s' % host, id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 121, in by_host site = by_host(host=host[4:], id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 124, in by_host site = by_host(host = 'www.%s' % host, id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 121, in by_host site = by_host(host=host[4:], id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 124, in by_host site = by_host(host = 'www.%s' % host, id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 101, in by_host site = Site.objects.get(domain=host) File "C:\django\django\db\models\manager.py", line 132, in get return self.get_query_set().get(*args, **kwargs) File "C:\django\django\db\models\query.py", line 336, in get num = len(clone) File "C:\django\django\db\models\query.py", line 81, in __len__ self._result_cache = list(self.iterator()) File "C:\django\django\db\models\query.py", line 269, in iterator for row in compiler.results_iter(): File "C:\django\django\db\models\sql\compiler.py", line 672, in results_iter for rows in self.execute_sql(MULTI): File "C:\django\django\db\models\sql\compiler.py", line 717, in execute_sql sql, params = self.as_sql() File "C:\django\django\db\models\sql\compiler.py", line 65, in as_sql where, w_params = self.query.where.as_sql(qn=qn, connection=self.connection) File "C:\django\django\db\models\sql\where.py", line 91, in as_sql sql, params = child.as_sql(qn=qn, connection=connection) File "C:\django\django\db\models\sql\where.py", line 94, in as_sql sql, params = self.make_atom(child, qn, connection) File "C:\django\django\db\models\sql\where.py", line 141, in make_atom lvalue, params = lvalue.process(lookup_type, params_or_value, connection) File "C:\django\django\db\models\sql\where.py", line 312, in process connection=connection, prepared=True) File "C:\django\django\db\models\fields\subclassing.py", line 53, in inner return func(*args, **kwargs) File "C:\django\django\db\models\fields\subclassing.py", line 53, in inner return func(*args, **kwargs) File "C:\django\django\db\models\fields\__init__.py", line 323, in get_db_prep _lookup return [self.get_db_prep_value(value, connection=connection, prepared=prepar ed)] File "C:\django\django\db\models\fields\subclassing.py", line 53, in inner return func(*args, **kwargs) File "C:\django\django\db\models\fields\subclassing.py", line 53, in inner return func(*args, **kwargs) RuntimeError: maximum recursion depth exceeded while calling a Python object ---------------------------------------------------------------------- Ran 7 tests in 48.453s FAILED (errors=1) Destroying test database 'default'...

Read the article

Configuring ELMAH: Unrecognized config section error

- by Zian Choy

Setup: Windows XP .NET Framework 3.5 SP1 ASP .NET MVC Version 1 I've been trying to set up ELMAH by following the instructions at http://code.google.com/p/elmah/wiki/MVC but I just get the following error when press F5: Description: An error occurred during the processing of a configuration file required to service this request. Please review the specific error details below and modify your configuration file appropriately. Parser Error Message: Unrecognized configuration section elmah/errorlog. Source Error: Line 30: Line 31: <elmah> Line 32: <errorlog type="Elmah.XmlFilerErrorLog, Elmah" logPath="~/App_Data" /> Line 33: </elmah> Line 34: And, here's the configuration file: <?xml version="1.0"?>  <configuration> <configSections> <sectionGroup name="elmah"> <section name="security" type="Elmah.SecuritySectionHandler, Elmah"/> <section name="errorLog" type="Elmah.ErrorLogSectionHandler, Elmah"/> <section name="errorMail" type="Elmah.ErrorMailSectionHandler, Elmah"/> <section name="errorFilter" type="Elmah.ErrorFilterSectionHandler, Elmah"/> </sectionGroup> <sectionGroup name="system.web.extensions" type="System.Web.Configuration.SystemWebExtensionsSectionGroup, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"> <sectionGroup name="scripting" type="System.Web.Configuration.ScriptingSectionGroup, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"> <section name="scriptResourceHandler" type="System.Web.Configuration.ScriptingScriptResourceHandlerSection, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" requirePermission="false" allowDefinition="MachineToApplication"/> <sectionGroup name="webServices" type="System.Web.Configuration.ScriptingWebServicesSectionGroup, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"> <section name="jsonSerialization" type="System.Web.Configuration.ScriptingJsonSerializationSection, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" requirePermission="false" allowDefinition="Everywhere"/> <section name="profileService" type="System.Web.Configuration.ScriptingProfileServiceSection, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" requirePermission="false" allowDefinition="MachineToApplication"/> <section name="authenticationService" type="System.Web.Configuration.ScriptingAuthenticationServiceSection, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" requirePermission="false" allowDefinition="MachineToApplication"/> <section name="roleService" type="System.Web.Configuration.ScriptingRoleServiceSection, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" requirePermission="false" allowDefinition="MachineToApplication"/> </sectionGroup> </sectionGroup> </sectionGroup> </configSections> <elmah> <errorlog type="Elmah.XmlFilerErrorLog, Elmah" logPath="~/App_Data" /> </elmah> <appSettings/> <connectionStrings> <add name="ApplicationServices" connectionString="data source=.\SQLEXPRESS;Integrated Security=SSPI;AttachDBFilename=|DataDirectory|aspnetdb.mdf;User Instance=true" providerName="System.Data.SqlClient"/> </connectionStrings> <system.web>  <compilation debug="true"> <assemblies> <add assembly="System.Core, Version=3.5.0.0, Culture=neutral, PublicKeyToken=B77A5C561934E089"/> <add assembly="System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/> <add assembly="System.Web.Abstractions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/> <add assembly="System.Web.Routing, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/> <add assembly="System.Web.Mvc, Version=1.0.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/> <add assembly="System.Data.DataSetExtensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=B77A5C561934E089"/> <add assembly="System.Xml.Linq, Version=3.5.0.0, Culture=neutral, PublicKeyToken=B77A5C561934E089"/> <add assembly="System.Data.Linq, Version=3.5.0.0, Culture=neutral, PublicKeyToken=B77A5C561934E089"/> </assemblies> </compilation>  <authentication mode="Forms"> <forms loginUrl="~/Account/LogOn" timeout="2880"/> </authentication> <membership> <providers> <clear/> <add name="AspNetSqlMembershipProvider" type="System.Web.Security.SqlMembershipProvider, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" connectionStringName="ApplicationServices" enablePasswordRetrieval="false" enablePasswordReset="true" requiresQuestionAndAnswer="false" requiresUniqueEmail="false" passwordFormat="Hashed" maxInvalidPasswordAttempts="5" minRequiredPasswordLength="6" minRequiredNonalphanumericCharacters="0" passwordAttemptWindow="10" passwordStrengthRegularExpression="" applicationName="/"/> </providers> </membership> <profile> <providers> <clear/> <add name="AspNetSqlProfileProvider" type="System.Web.Profile.SqlProfileProvider, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" connectionStringName="ApplicationServices" applicationName="/"/> </providers> </profile> <roleManager enabled="false"> <providers> <clear/> <add connectionStringName="ApplicationServices" applicationName="/" name="AspNetSqlRoleProvider" type="System.Web.Security.SqlRoleProvider, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a"/> <add applicationName="/" name="AspNetWindowsTokenRoleProvider" type="System.Web.Security.WindowsTokenRoleProvider, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a"/> </providers> </roleManager>  <pages> <controls> <add tagPrefix="asp" namespace="System.Web.UI" assembly="System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/> <add tagPrefix="asp" namespace="System.Web.UI.WebControls" assembly="System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/> </controls> <namespaces> <add namespace="System.Web.Mvc"/> <add namespace="System.Web.Mvc.Ajax"/> <add namespace="System.Web.Mvc.Html"/> <add namespace="System.Web.Routing"/> <add namespace="System.Linq"/> <add namespace="System.Collections.Generic"/> </namespaces> </pages> <httpHandlers> <remove verb="*" path="*.asmx"/> <add verb="POST,GET,HEAD" path="elmah.axd" type="Elmah.ErrorLogPageFactory, Elmah"/> <add verb="*" path="*.asmx" validate="false" type="System.Web.Script.Services.ScriptHandlerFactory, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/> <add verb="*" path="*_AppService.axd" validate="false" type="System.Web.Script.Services.ScriptHandlerFactory, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/> <add verb="GET,HEAD" path="ScriptResource.axd" type="System.Web.Handlers.ScriptResourceHandler, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" validate="false"/> <add verb="*" path="*.mvc" validate="false" type="System.Web.Mvc.MvcHttpHandler, System.Web.Mvc, Version=1.0.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/> </httpHandlers> <httpModules> <add name="ErrorLog" type="Elmah.ErrorLogModule, Elmah"/> <add name="ScriptModule" type="System.Web.Handlers.ScriptModule, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/> <add name="UrlRoutingModule" type="System.Web.Routing.UrlRoutingModule, System.Web.Routing, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/> </httpModules> </system.web> <system.codedom> <compilers> <compiler language="c#;cs;csharp" extension=".cs" warningLevel="4" type="Microsoft.CSharp.CSharpCodeProvider, System, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089"> <providerOption name="CompilerVersion" value="v3.5"/> <providerOption name="WarnAsError" value="false"/> </compiler> <compiler language="vb;vbs;visualbasic;vbscript" extension=".vb" warningLevel="4" type="Microsoft.VisualBasic.VBCodeProvider, System, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089"> <providerOption name="CompilerVersion" value="v3.5"/> <providerOption name="OptionInfer" value="true"/> <providerOption name="WarnAsError" value="false"/> </compiler> </compilers> </system.codedom> <system.web.extensions/> <system.webServer> <validation validateIntegratedModeConfiguration="false"/> <modules runAllManagedModulesForAllRequests="true"> <remove name="ScriptModule"/> <remove name="UrlRoutingModule"/> <add name="ScriptModule" preCondition="managedHandler" type="System.Web.Handlers.ScriptModule, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/> <add name="UrlRoutingModule" type="System.Web.Routing.UrlRoutingModule, System.Web.Routing, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/> </modules> <handlers> <remove name="WebServiceHandlerFactory-Integrated"/> <remove name="ScriptHandlerFactory"/> <remove name="ScriptHandlerFactoryAppServices"/> <remove name="ScriptResource"/> <remove name="MvcHttpHandler"/> <remove name="UrlRoutingHandler"/> <add name="ScriptHandlerFactory" verb="*" path="*.asmx" preCondition="integratedMode" type="System.Web.Script.Services.ScriptHandlerFactory, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/> <add name="ScriptHandlerFactoryAppServices" verb="*" path="*_AppService.axd" preCondition="integratedMode" type="System.Web.Script.Services.ScriptHandlerFactory, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/> <add name="ScriptResource" preCondition="integratedMode" verb="GET,HEAD" path="ScriptResource.axd" type="System.Web.Handlers.ScriptResourceHandler, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/> <add name="MvcHttpHandler" preCondition="integratedMode" verb="*" path="*.mvc" type="System.Web.Mvc.MvcHttpHandler, System.Web.Mvc, Version=1.0.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/> <add name="UrlRoutingHandler" preCondition="integratedMode" verb="*" path="UrlRouting.axd" type="System.Web.HttpForbiddenHandler, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a"/> </handlers> </system.webServer> </configuration> Edit Solved The following block should have gone after </system.webServer> and before </configuration> <elmah> <errorlog type="Elmah.XmlFilerErrorLog, Elmah" logPath="~/App_Data" /> </elmah>

Read the article

Configuration Error ASP.NET password format specified is invalid

- by salvationishere

I am getting the above error in IIS 6.0 now when I browse my C# / SQL web application. This was built in VS 2008 and SS 2008 on a 32-bit XP OS. The application was working before I added Login controls to it. However, this is my first time configuring Login/password controls so I am probably missing something really basic. This error doesn't happen until I try to login. Here are the details of my error from IIS; I get the same error in VS: Parser Error Message: Password format specified is invalid. Source Error: Line 31: <add Line 32: name="SqlProvider" Line 33: type="System.Web.Security.SqlMembershipProvider" Line 34: connectionStringName="AdventureWorksConnectionString2" Line 35: applicationName="AddFileToSQL2" Source File: C:\Inetpub\AddFileToSQL2\web.config Line: 33 And the relevant contents of my web.config are: <connectionStrings> <add name="Master" connectionString="server=MSSQLSERVER;database=Master; Integrated Security=SSPI" providerName="System.Data.SqlClient" /> <add name="AdventureWorksConnectionString" connectionString="Data Source=SIDEKICK;Initial Catalog=AdventureWorks;Integrated Security=True" providerName="System.Data.SqlClient" /> <add name="AdventureWorksConnectionString2" connectionString="Data Source=SIDEKICK;Initial Catalog=AdventureWorks;Integrated Security=True; " providerName="System.Data.SqlClient" /> </connectionStrings> <system.web> <membership defaultProvider="SqlProvider" userIsOnlineTimeWindow="15"> <providers> <clear /> <add name="SqlProvider" type="System.Web.Security.SqlMembershipProvider" connectionStringName="AdventureWorksConnectionString2" applicationName="AddFileToSQL2" enablePasswordRetrieval="false" enablePasswordReset="true" requiresQuestionAndAnswer="true" requiresUniqueEmail="false" passwordFormat="encrypted" /> </providers> </membership>  <roleManager enabled="true" /> <compilation debug="true"> <assemblies> <add assembly="System.Core, Version=3.5.0.0, Culture=neutral, PublicKeyToken=B77A5C561934E089"/> <add assembly="System.Data.DataSetExtensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=B77A5C561934E089"/> <add assembly="System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/> <add assembly="System.Xml.Linq, Version=3.5.0.0, Culture=neutral, PublicKeyToken=B77A5C561934E089"/> </assemblies> </compilation>  <authentication mode="Forms"> <forms loginUrl="Password.aspx" protection="All" timeout="30" name="SqlAuthCookie" path="/FormsAuth" requireSSL="false" slidingExpiration="true" defaultUrl="default.aspx" cookieless="UseCookies" enableCrossAppRedirects="false" /> </authentication>  <authorization> <deny users="?" /> <allow users="*" /> </authorization>  <pages> <controls> <add tagPrefix="asp" namespace="System.Web.UI" assembly="System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/> <add tagPrefix="asp" namespace="System.Web.UI.WebControls" assembly="System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/> </controls> </pages> <httpHandlers> <remove verb="*" path="*.asmx"/> <add verb="*" path="*.asmx" validate="false" type="System.Web.Script.Services.ScriptHandlerFactory, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/> <add verb="*" path="*_AppService.axd" validate="false" type="System.Web.Script.Services.ScriptHandlerFactory, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/> <add verb="GET,HEAD" path="ScriptResource.axd" type="System.Web.Handlers.ScriptResourceHandler, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" validate="false"/> </httpHandlers> <httpModules> <add name="ScriptModule" type="System.Web.Handlers.ScriptModule, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/> </httpModules> </system.web> <system.codedom> <compilers> <compiler language="c#;cs;csharp" extension=".cs" warningLevel="4" type="Microsoft.CSharp.CSharpCodeProvider, System, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089"> <providerOption name="CompilerVersion" value="v3.5"/> <providerOption name="WarnAsError" value="false"/> </compiler> </compilers> </system.codedom>  <system.webServer> <validation validateIntegratedModeConfiguration="false"/> <modules> <remove name="ScriptModule"/> <add name="ScriptModule" preCondition="managedHandler" type="System.Web.Handlers.ScriptModule, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/> </modules> <handlers> <remove name="WebServiceHandlerFactory-Integrated"/> <remove name="ScriptHandlerFactory"/> <remove name="ScriptHandlerFactoryAppServices"/> <remove name="ScriptResource"/> <add name="ScriptHandlerFactory" verb="*" path="*.asmx" preCondition="integratedMode" type="System.Web.Script.Services.ScriptHandlerFactory, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/> <add name="ScriptHandlerFactoryAppServices" verb="*" path="*_AppService.axd" preCondition="integratedMode" type="System.Web.Script.Services.ScriptHandlerFactory, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/> <add name="ScriptResource" preCondition="integratedMode" verb="GET,HEAD" path="ScriptResource.axd" type="System.Web.Handlers.ScriptResourceHandler, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/> </handlers> </system.webServer> <runtime> <assemblyBinding xmlns="urn:schemas-microsoft-com:asm.v1"> <dependentAssembly> <assemblyIdentity name="System.Web.Extensions" publicKeyToken="31bf3856ad364e35"/> <bindingRedirect oldVersion="1.0.0.0-1.1.0.0" newVersion="3.5.0.0"/> </dependentAssembly> <dependentAssembly> <assemblyIdentity name="System.Web.Extensions.Design" publicKeyToken="31bf3856ad364e35"/> <bindingRedirect oldVersion="1.0.0.0-1.1.0.0" newVersion="3.5.0.0"/> </dependentAssembly> </assemblyBinding> </runtime> <system.net> <mailSettings> <smtp from="[email protected]"> <network host="SIDEKICK" password="" userName="" /> </smtp> </mailSettings> </system.net> </configuration> I checked and I do have an aspnetdb database in my SSMS. The Network Service account has SELECT, EXECUTE, INSERT, UPDATE access to this database. But one problem I see is that all of the tables in this database are empty except for aspnet_SchemaVersions, which just has 2 records (common and membership). Is this right? I added users and roles via ASP.NET Configuration wizard, and I believe I set this up correctly since I followed the Microsoft tutorial at http://msdn.microsoft.com/en-us/library/ms998347.aspx. One other problem I see from VS is after adding content to my Page_Load on my initial login Password.aspx.cs file, I'm getting an invalid cast problem below. I googled this problem also but the solutions I saw confused me even more. The Page_Load section I added is: protected void Page_Load(object sender, EventArgs e) { Response.Write("Hello, " + Server.HtmlEncode(User.Identity.Name)); FormsIdentity id = (FormsIdentity)User.Identity; FormsAuthenticationTicket ticket = id.Ticket; Response.Write("<p/>TicketName: " + ticket.Name); Response.Write("<br/>Cookie Path: " + ticket.CookiePath); Response.Write("<br/>Ticket Expiration: " + ticket.Expiration.ToString()); Response.Write("<br/>Expired: " + ticket.Expired.ToString()); Response.Write("<br/>Persistent: " + ticket.IsPersistent.ToString()); Response.Write("<br/>IssueDate: " + ticket.IssueDate.ToString()); Response.Write("<br/>UserData: " + ticket.UserData); Response.Write("<br/>Version: " + ticket.Version.ToString()); } And the VS exception I'm getting: System.InvalidCastException was unhandled by user code Message="Unable to cast object of type 'System.Security.Principal.GenericIdentity' to type 'System.Web.Security.FormsIdentity'." Source="AddFileToSQL" StackTrace: at AddFileToSQL.Password.Page_Load(Object sender, EventArgs e) in C:\Documents and Settings\Admin\My Documents\Visual Studio 2008\Projects\AddFileToSQL2\AddFileToSQL\Password.aspx.cs:line 22 at System.Web.Util.CalliHelper.EventArgFunctionCaller(IntPtr fp, Object o, Object t, EventArgs e) at System.Web.Util.CalliEventHandlerDelegateProxy.Callback(Object sender, EventArgs e) at System.Web.UI.Control.OnLoad(EventArgs e) at System.Web.UI.Control.LoadRecursive() at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) InnerException:

Read the article

getaddrinfo appears to return different results between Windows and Ubuntu?

- by MrDuk

I have the following two sets of code: Windows #undef UNICODE #include <winsock2.h> #include <ws2tcpip.h> #include <stdio.h> // link with Ws2_32.lib #pragma comment (lib, "Ws2_32.lib") int __cdecl main(int argc, char **argv) { //----------------------------------------- // Declare and initialize variables WSADATA wsaData; int iResult; INT iRetval; DWORD dwRetval; argv[1] = "www.google.com"; argv[2] = "80"; int i = 1; struct addrinfo *result = NULL; struct addrinfo *ptr = NULL; struct addrinfo hints; struct sockaddr_in *sockaddr_ipv4; // struct sockaddr_in6 *sockaddr_ipv6; LPSOCKADDR sockaddr_ip; char ipstringbuffer[46]; DWORD ipbufferlength = 46; /* // Validate the parameters if (argc != 3) { printf("usage: %s <hostname> <servicename>\n", argv[0]); printf("getaddrinfo provides protocol-independent translation\n"); printf(" from an ANSI host name to an IP address\n"); printf("%s example usage\n", argv[0]); printf(" %s www.contoso.com 0\n", argv[0]); return 1; } */ // Initialize Winsock iResult = WSAStartup(MAKEWORD(2, 2), &wsaData); if (iResult != 0) { printf("WSAStartup failed: %d\n", iResult); return 1; } //-------------------------------- // Setup the hints address info structure // which is passed to the getaddrinfo() function ZeroMemory( &hints, sizeof(hints) ); hints.ai_family = AF_UNSPEC; hints.ai_socktype = SOCK_STREAM; // hints.ai_protocol = IPPROTO_TCP; printf("Calling getaddrinfo with following parameters:\n"); printf("\tnodename = %s\n", argv[1]); printf("\tservname (or port) = %s\n\n", argv[2]); //-------------------------------- // Call getaddrinfo(). If the call succeeds, // the result variable will hold a linked list // of addrinfo structures containing response // information dwRetval = getaddrinfo(argv[1], argv[2], &hints, &result); if ( dwRetval != 0 ) { printf("getaddrinfo failed with error: %d\n", dwRetval); WSACleanup(); return 1; } printf("getaddrinfo returned success\n"); // Retrieve each address and print out the hex bytes for(ptr=result; ptr != NULL ;ptr=ptr->ai_next) { printf("getaddrinfo response %d\n", i++); printf("\tFlags: 0x%x\n", ptr->ai_flags); printf("\tFamily: "); switch (ptr->ai_family) { case AF_UNSPEC: printf("Unspecified\n"); break; case AF_INET: printf("AF_INET (IPv4)\n"); sockaddr_ipv4 = (struct sockaddr_in *) ptr->ai_addr; printf("\tIPv4 address %s\n", inet_ntoa(sockaddr_ipv4->sin_addr) ); break; case AF_INET6: printf("AF_INET6 (IPv6)\n"); // the InetNtop function is available on Windows Vista and later // sockaddr_ipv6 = (struct sockaddr_in6 *) ptr->ai_addr; // printf("\tIPv6 address %s\n", // InetNtop(AF_INET6, &sockaddr_ipv6->sin6_addr, ipstringbuffer, 46) ); // We use WSAAddressToString since it is supported on Windows XP and later sockaddr_ip = (LPSOCKADDR) ptr->ai_addr; // The buffer length is changed by each call to WSAAddresstoString // So we need to set it for each iteration through the loop for safety ipbufferlength = 46; iRetval = WSAAddressToString(sockaddr_ip, (DWORD) ptr->ai_addrlen, NULL, ipstringbuffer, &ipbufferlength ); if (iRetval) printf("WSAAddressToString failed with %u\n", WSAGetLastError() ); else printf("\tIPv6 address %s\n", ipstringbuffer); break; case AF_NETBIOS: printf("AF_NETBIOS (NetBIOS)\n"); break; default: printf("Other %ld\n", ptr->ai_family); break; } printf("\tSocket type: "); switch (ptr->ai_socktype) { case 0: printf("Unspecified\n"); break; case SOCK_STREAM: printf("SOCK_STREAM (stream)\n"); break; case SOCK_DGRAM: printf("SOCK_DGRAM (datagram) \n"); break; case SOCK_RAW: printf("SOCK_RAW (raw) \n"); break; case SOCK_RDM: printf("SOCK_RDM (reliable message datagram)\n"); break; case SOCK_SEQPACKET: printf("SOCK_SEQPACKET (pseudo-stream packet)\n"); break; default: printf("Other %ld\n", ptr->ai_socktype); break; } printf("\tProtocol: "); switch (ptr->ai_protocol) { case 0: printf("Unspecified\n"); break; case IPPROTO_TCP: printf("IPPROTO_TCP (TCP)\n"); break; case IPPROTO_UDP: printf("IPPROTO_UDP (UDP) \n"); break; default: printf("Other %ld\n", ptr->ai_protocol); break; } printf("\tLength of this sockaddr: %d\n", ptr->ai_addrlen); printf("\tCanonical name: %s\n", ptr->ai_canonname); } freeaddrinfo(result); WSACleanup(); return 0; } Ubuntu /* ** listener.c -- a datagram sockets "server" demo */ #include <stdio.h> #include <stdlib.h> #include <unistd.h> #include <errno.h> #include <string.h> #include <sys/types.h> #include <sys/socket.h> #include <netinet/in.h> #include <arpa/inet.h> #include <netdb.h> #define MYPORT "4950" // the port users will be connecting to #define MAXBUFLEN 100 // get sockaddr, IPv4 or IPv6: void *get_in_addr(struct sockaddr *sa) { if (sa->sa_family == AF_INET) { return &(((struct sockaddr_in*)sa)->sin_addr); } return &(((struct sockaddr_in6*)sa)->sin6_addr); } int main(void) { int sockfd; struct addrinfo hints, *servinfo, *p; int rv; int numbytes; struct sockaddr_storage their_addr; char buf[MAXBUFLEN]; socklen_t addr_len; char s[INET6_ADDRSTRLEN]; memset(&hints, 0, sizeof hints); hints.ai_family = AF_UNSPEC; // set to AF_INET to force IPv4 hints.ai_socktype = SOCK_DGRAM; hints.ai_flags = AI_PASSIVE; // use my IP if ((rv = getaddrinfo(NULL, MYPORT, &hints, &servinfo)) != 0) { fprintf(stderr, "getaddrinfo: %s\n", gai_strerror(rv)); return 1; } // loop through all the results and bind to the first we can for(p = servinfo; p != NULL; p = p->ai_next) { if ((sockfd = socket(p->ai_family, p->ai_socktype, p->ai_protocol)) == -1) { perror("listener: socket"); continue; } if (bind(sockfd, p->ai_addr, p->ai_addrlen) == -1) { close(sockfd); perror("listener: bind"); continue; } break; } if (p == NULL) { fprintf(stderr, "listener: failed to bind socket\n"); return 2; } freeaddrinfo(servinfo); printf("listener: waiting to recvfrom...\n"); addr_len = sizeof their_addr; if ((numbytes = recvfrom(sockfd, buf, MAXBUFLEN-1 , 0, (struct sockaddr *)&their_addr, &addr_len)) == -1) { perror("recvfrom"); exit(1); } printf("listener: got packet from %s\n", inet_ntop(their_addr.ss_family, get_in_addr((struct sockaddr *)&their_addr), s, sizeof s)); printf("listener: packet is %d bytes long\n", numbytes); buf[numbytes] = '\0'; printf("listener: packet contains \"%s\"\n", buf); close(sockfd); return 0; } When I attempt www.google.com, I don't get the ipv6 socket returned on Windows - why is this? Outputs: (ubuntu) caleb@ub1:~/Documents/dev/cs438/mp0/MP0$ ./a.out www.google.com IP addresses for www.google.com: IPv4: 74.125.228.115 IPv4: 74.125.228.116 IPv4: 74.125.228.112 IPv4: 74.125.228.113 IPv4: 74.125.228.114 IPv6: 2607:f8b0:4004:803::1010 Outputs: (win) Calling getaddrinfo with following parameters: nodename = www.google.com servname (or port) = 80 getaddrinfo returned success getaddrinfo response 1 Flags: 0x0 Family: AF_INET (IPv4) IPv4 address 74.125.228.114 Socket type: SOCK_STREAM (stream) Protocol: Unspecified Length of this sockaddr: 16 Canonical name: (null) getaddrinfo response 2 Flags: 0x0 Family: AF_INET (IPv4) IPv4 address 74.125.228.115 Socket type: SOCK_STREAM (stream) Protocol: Unspecified Length of this sockaddr: 16 Canonical name: (null) getaddrinfo response 3 Flags: 0x0 Family: AF_INET (IPv4) IPv4 address 74.125.228.116 Socket type: SOCK_STREAM (stream) Protocol: Unspecified Length of this sockaddr: 16 Canonical name: (null) getaddrinfo response 4 Flags: 0x0 Family: AF_INET (IPv4) IPv4 address 74.125.228.112 Socket type: SOCK_STREAM (stream) Protocol: Unspecified Length of this sockaddr: 16 Canonical name: (null) getaddrinfo response 5 Flags: 0x0 Family: AF_INET (IPv4) IPv4 address 74.125.228.113 Socket type: SOCK_STREAM (stream) Protocol: Unspecified Length of this sockaddr: 16 Canonical name: (null)

Read the article

Unable to install Xdebug

- by burnt1ce

I've registered xdebug in php.ini (as per http://xdebug.org/docs/install) but it's not showing up when i run "php -m" or when i get a test page to run "phpinfo()". I've just installed the latest version of XAMPP. Can anyone provide any suggestions in getting xdebug to show up? This is what i get when i run phpinfo(). **PHP Version 5.3.1** System Windows NT ANDREW_LAPTOP 5.1 build 2600 (Windows XP Professional Service Pack 3) i586 Build Date Nov 20 2009 17:20:57 Compiler MSVC6 (Visual C++ 6.0) Architecture x86 Configure Command cscript /nologo configure.js "--enable-snapshot-build" Server API Apache 2.0 Handler Virtual Directory Support enabled Configuration File (php.ini) Path no value Loaded Configuration File C:\xampp\php\php.ini Scan this dir for additional .ini files (none) Additional .ini files parsed (none) PHP API 20090626 PHP Extension 20090626 Zend Extension 220090626 Zend Extension Build API220090626,TS,VC6 PHP Extension Build API20090626,TS,VC6 Debug Build no Thread Safety enabled Zend Memory Manager enabled Zend Multibyte Support disabled IPv6 Support enabled Registered PHP Streams https, ftps, php, file, glob, data, http, ftp, compress.zlib, compress.bzip2, phar, zip Registered Stream Socket Transports tcp, udp, ssl, sslv3, sslv2, tls Registered Stream Filters convert.iconv.*, string.rot13, string.toupper, string.tolower, string.strip_tags, convert.*, consumed, dechunk, zlib.*, bzip2.* This program makes use of the Zend Scripting Language Engine: Zend Engine v2.3.0, Copyright (c) 1998-2009 Zend Technologies PHP Credits Configuration apache2handler Apache Version Apache/2.2.14 (Win32) DAV/2 mod_ssl/2.2.14 OpenSSL/0.9.8l mod_autoindex_color PHP/5.3.1 mod_apreq2-20090110/2.7.1 mod_perl/2.0.4 Perl/v5.10.1 Apache API Version 20051115 Server Administrator postmaster@localhost Hostname:Port localhost:80 Max Requests Per Child: 0 - Keep Alive: on - Max Per Connection: 100 Timeouts Connection: 300 - Keep-Alive: 5 Virtual Server No Server Root C:/xampp/apache Loaded Modules core mod_win32 mpm_winnt http_core mod_so mod_actions mod_alias mod_asis mod_auth_basic mod_auth_digest mod_authn_default mod_authn_file mod_authz_default mod_authz_groupfile mod_authz_host mod_authz_user mod_cgi mod_dav mod_dav_fs mod_dav_lock mod_dir mod_env mod_headers mod_include mod_info mod_isapi mod_log_config mod_mime mod_negotiation mod_rewrite mod_setenvif mod_ssl mod_status mod_autoindex_color mod_php5 mod_perl mod_apreq2 Directive Local Value Master Value engine 1 1 last_modified 0 0 xbithack 0 0 Apache Environment Variable Value MIBDIRS C:/xampp/php/extras/mibs MYSQL_HOME C:\xampp\mysql\bin OPENSSL_CONF C:/xampp/apache/bin/openssl.cnf PHP_PEAR_SYSCONF_DIR C:\xampp\php PHPRC C:\xampp\php TMP C:\xampp\tmp HTTP_HOST localhost HTTP_CONNECTION keep-alive HTTP_USER_AGENT Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US) AppleWebKit/533.2 (KHTML, like Gecko) Chrome/5.0.342.8 Safari/533.2 HTTP_CACHE_CONTROL max-age=0 HTTP_ACCEPT application/xml,application/xhtml+xml,text/html;q=0.9,text/plain;q=0.8,image/png,*/*;q=0.5 HTTP_ACCEPT_ENCODING gzip,deflate,sdch HTTP_ACCEPT_LANGUAGE en-US,en;q=0.8 HTTP_ACCEPT_CHARSET ISO-8859-1,utf-8;q=0.7,*;q=0.3 PATH C:\Documents and Settings\Andrew\Local Settings\Application Data\Google\Chrome\Application;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;c:\Program Files\Microsoft SQL Server\100\Tools\Binn\;c:\Program Files\Microsoft SQL Server\100\DTS\Binn\;C:\Program Files\QuickTime\QTSystem\;C:\Program Files\Common Files\DivX Shared\;C:\Program Files\WiTopia.Net\bin SystemRoot C:\WINDOWS COMSPEC C:\WINDOWS\system32\cmd.exe PATHEXT .COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH WINDIR C:\WINDOWS SERVER_SIGNATURE <address>Apache/2.2.14 (Win32) DAV/2 mod_ssl/2.2.14 OpenSSL/0.9.8l mod_autoindex_color PHP/5.3.1 mod_apreq2-20090110/2.7.1 mod_perl/2.0.4 Perl/v5.10.1 Server at localhost Port 80</address> SERVER_SOFTWARE Apache/2.2.14 (Win32) DAV/2 mod_ssl/2.2.14 OpenSSL/0.9.8l mod_autoindex_color PHP/5.3.1 mod_apreq2-20090110/2.7.1 mod_perl/2.0.4 Perl/v5.10.1 SERVER_NAME localhost SERVER_ADDR 127.0.0.1 SERVER_PORT 80 REMOTE_ADDR 127.0.0.1 DOCUMENT_ROOT C:/xampp/htdocs SERVER_ADMIN postmaster@localhost SCRIPT_FILENAME C:/xampp/htdocs/test.php REMOTE_PORT 3275 GATEWAY_INTERFACE CGI/1.1 SERVER_PROTOCOL HTTP/1.1 REQUEST_METHOD GET QUERY_STRING no value REQUEST_URI /test.php SCRIPT_NAME /test.php HTTP Headers Information HTTP Request Headers HTTP Request GET /test.php HTTP/1.1 Host localhost Connection keep-alive User-Agent Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US) AppleWebKit/533.2 (KHTML, like Gecko) Chrome/5.0.342.8 Safari/533.2 Cache-Control max-age=0 Accept application/xml,application/xhtml+xml,text/html;q=0.9,text/plain;q=0.8,image/png,*/*;q=0.5 Accept-Encoding gzip,deflate,sdch Accept-Language en-US,en;q=0.8 Accept-Charset ISO-8859-1,utf-8;q=0.7,*;q=0.3 HTTP Response Headers X-Powered-By PHP/5.3.1 Keep-Alive timeout=5, max=80 Connection Keep-Alive Transfer-Encoding chunked Content-Type text/html bcmath BCMath support enabled Directive Local Value Master Value bcmath.scale 0 0 bz2 BZip2 Support Enabled Stream Wrapper support compress.bz2:// Stream Filter support bzip2.decompress, bzip2.compress BZip2 Version 1.0.5, 10-Dec-2007 calendar Calendar support enabled com_dotnet COM support enabled DCOM support disabled .Net support enabled Directive Local Value Master Value com.allow_dcom 0 0 com.autoregister_casesensitive 1 1 com.autoregister_typelib 0 0 com.autoregister_verbose 0 0 com.code_page no value no value com.typelib_file no value no value Core PHP Version 5.3.1 Directive Local Value Master Value allow_call_time_pass_reference On On allow_url_fopen On On allow_url_include Off Off always_populate_raw_post_data Off Off arg_separator.input & & arg_separator.output & & asp_tags Off Off auto_append_file no value no value auto_globals_jit On On auto_prepend_file no value no value browscap C:\xampp\php\extras\browscap.ini C:\xampp\php\extras\browscap.ini default_charset no value no value default_mimetype text/html text/html define_syslog_variables Off Off disable_classes no value no value disable_functions no value no value display_errors On On display_startup_errors On On doc_root no value no value docref_ext no value no value docref_root no value no value enable_dl On On error_append_string no value no value error_log no value no value error_prepend_string no value no value error_reporting 22519 22519 exit_on_timeout Off Off expose_php On On extension_dir C:\xampp\php\ext C:\xampp\php\ext file_uploads On On highlight.bg #FFFFFF #FFFFFF highlight.comment #FF8000 #FF8000 highlight.default #0000BB #0000BB highlight.html #000000 #000000 highlight.keyword #007700 #007700 highlight.string #DD0000 #DD0000 html_errors On On ignore_repeated_errors Off Off ignore_repeated_source Off Off ignore_user_abort Off Off implicit_flush Off Off include_path .;C:\xampp\php\PEAR .;C:\xampp\php\PEAR log_errors Off Off log_errors_max_len 1024 1024 magic_quotes_gpc Off Off magic_quotes_runtime Off Off magic_quotes_sybase Off Off mail.add_x_header Off Off mail.force_extra_parameters no value no value mail.log no value no value max_execution_time 60 60 max_file_uploads 20 20 max_input_nesting_level 64 64 max_input_time 60 60 memory_limit 128M 128M open_basedir no value no value output_buffering no value no value output_handler no value no value post_max_size 128M 128M precision 14 14 realpath_cache_size 16K 16K realpath_cache_ttl 120 120 register_argc_argv On On register_globals Off Off register_long_arrays Off Off report_memleaks On On report_zend_debug On On request_order no value no value safe_mode Off Off safe_mode_exec_dir no value no value safe_mode_gid Off Off safe_mode_include_dir no value no value sendmail_from no value no value sendmail_path no value no value serialize_precision 100 100 short_open_tag Off Off SMTP localhost localhost smtp_port 25 25 sql.safe_mode Off Off track_errors Off Off unserialize_callback_func no value no value upload_max_filesize 128M 128M upload_tmp_dir C:\xampp\tmp C:\xampp\tmp user_dir no value no value user_ini.cache_ttl 300 300 user_ini.filename .user.ini .user.ini variables_order GPCS GPCS xmlrpc_error_number 0 0 xmlrpc_errors Off Off y2k_compliance On On zend.enable_gc On On ctype ctype functions enabled date date/time support enabled "Olson" Timezone Database Version 2009.18 Timezone Database internal Default timezone America/New_York Directive Local Value Master Value date.default_latitude 31.7667 31.7667 date.default_longitude 35.2333 35.2333 date.sunrise_zenith 90.583333 90.583333 date.sunset_zenith 90.583333 90.583333 date.timezone America/New_York America/New_York dom DOM/XML enabled DOM/XML API Version 20031129 libxml Version 2.7.6 HTML Support enabled XPath Support enabled XPointer Support enabled Schema Support enabled RelaxNG Support enabled ereg Regex Library System library enabled exif EXIF Support enabled EXIF Version 1.4 $Id: exif.c 287372 2009-08-16 14:32:32Z iliaa $ Supported EXIF Version 0220 Supported filetypes JPEG,TIFF Directive Local Value Master Value exif.decode_jis_intel JIS JIS exif.decode_jis_motorola JIS JIS exif.decode_unicode_intel UCS-2LE UCS-2LE exif.decode_unicode_motorola UCS-2BE UCS-2BE exif.encode_jis no value no value exif.encode_unicode ISO-8859-15 ISO-8859-15 fileinfo fileinfo support enabled version 1.0.5-dev filter Input Validation and Filtering enabled Revision $Revision: 289434 $ Directive Local Value Master Value filter.default unsafe_raw unsafe_raw filter.default_flags no value no value ftp FTP support enabled gd GD Support enabled GD Version bundled (2.0.34 compatible) FreeType Support enabled FreeType Linkage with freetype FreeType Version 2.3.11 T1Lib Support enabled GIF Read Support enabled GIF Create Support enabled JPEG Support enabled libJPEG Version 7 PNG Support enabled libPNG Version 1.2.40 WBMP Support enabled XBM Support enabled JIS-mapped Japanese Font Support enabled Directive Local Value Master Value gd.jpeg_ignore_warning 0 0 gettext GetText Support enabled hash hash support enabled Hashing Engines md2 md4 md5 sha1 sha224 sha256 sha384 sha512 ripemd128 ripemd160 ripemd256 ripemd320 whirlpool tiger128,3 tiger160,3 tiger192,3 tiger128,4 tiger160,4 tiger192,4 snefru snefru256 gost adler32 crc32 crc32b salsa10 salsa20 haval128,3 haval160,3 haval192,3 haval224,3 haval256,3 haval128,4 haval160,4 haval192,4 haval224,4 haval256,4 haval128,5 haval160,5 haval192,5 haval224,5 haval256,5 iconv iconv support enabled iconv implementation "libiconv" iconv library version 1.13 Directive Local Value Master Value iconv.input_encoding ISO-8859-1 ISO-8859-1 iconv.internal_encoding ISO-8859-1 ISO-8859-1 iconv.output_encoding ISO-8859-1 ISO-8859-1 imap IMAP c-Client Version 2007e SSL Support enabled json json support enabled json version 1.2.1 libxml libXML support active libXML Compiled Version 2.7.6 libXML Loaded Version 20706 libXML streams enabled mbstring Multibyte Support enabled Multibyte string engine libmbfl HTTP input encoding translation disabled mbstring extension makes use of "streamable kanji code filter and converter", which is distributed under the GNU Lesser General Public License version 2.1. Multibyte (japanese) regex support enabled Multibyte regex (oniguruma) version 4.7.1 Directive Local Value Master Value mbstring.detect_order no value no value mbstring.encoding_translation Off Off mbstring.func_overload 0 0 mbstring.http_input pass pass mbstring.http_output pass pass mbstring.http_output_conv_mimetypes ^(text/|application/xhtml\+xml) ^(text/|application/xhtml\+xml) mbstring.internal_encoding no value no value mbstring.language neutral neutral mbstring.strict_detection Off Off mbstring.substitute_character no value no value mcrypt mcrypt support enabled Version 2.5.8 Api No 20021217 Supported ciphers cast-128 gost rijndael-128 twofish arcfour cast-256 loki97 rijndael-192 saferplus wake blowfish-compat des rijndael-256 serpent xtea blowfish enigma rc2 tripledes Supported modes cbc cfb ctr ecb ncfb nofb ofb stream Directive Local Value Master Value mcrypt.algorithms_dir no value no value mcrypt.modes_dir no value no value mhash MHASH support Enabled MHASH API Version Emulated Support ming Ming SWF output library enabled Version 0.4.3 mysql MySQL Support enabled Active Persistent Links 0 Active Links 0 Client API version 5.1.41 Directive Local Value Master Value mysql.allow_local_infile On On mysql.allow_persistent On On mysql.connect_timeout 60 60 mysql.default_host no value no value mysql.default_password no value no value mysql.default_port 3306 3306 mysql.default_socket MySQL MySQL mysql.default_user no value no value mysql.max_links Unlimited Unlimited mysql.max_persistent Unlimited Unlimited mysql.trace_mode Off Off mysqli MysqlI Support enabled Client API library version 5.1.41 Active Persistent Links 0 Inactive Persistent Links 0 Active Links 0 Client API header version 5.1.41 MYSQLI_SOCKET MySQL Directive Local Value Master Value mysqli.allow_local_infile On On mysqli.allow_persistent On On mysqli.default_host no value no value mysqli.default_port 3306 3306 mysqli.default_pw no value no value mysqli.default_socket MySQL MySQL mysqli.default_user no value no value mysqli.max_links Unlimited Unlimited mysqli.max_persistent Unlimited Unlimited mysqli.reconnect Off Off mysqlnd mysqlnd enabled Version mysqlnd 5.0.5-dev - 081106 - $Revision: 289630 $ Command buffer size 4096 Read buffer size 32768 Read timeout 31536000 Collecting statistics Yes Collecting memory statistics No Client statistics bytes_sent 0 bytes_received 0 packets_sent 0 packets_received 0 protocol_overhead_in 0 protocol_overhead_out 0 bytes_received_ok_packet 0 bytes_received_eof_packet 0 bytes_received_rset_header_packet 0 bytes_received_rset_field_meta_packet 0 bytes_received_rset_row_packet 0 bytes_received_prepare_response_packet 0 bytes_received_change_user_packet 0 packets_sent_command 0 packets_received_ok 0 packets_received_eof 0 packets_received_rset_header 0 packets_received_rset_field_meta 0 packets_received_rset_row 0 packets_received_prepare_response 0 packets_received_change_user 0 result_set_queries 0 non_result_set_queries 0 no_index_used 0 bad_index_used 0 slow_queries 0 buffered_sets 0 unbuffered_sets 0 ps_buffered_sets 0 ps_unbuffered_sets 0 flushed_normal_sets 0 flushed_ps_sets 0 ps_prepared_never_executed 0 ps_prepared_once_executed 0 rows_fetched_from_server_normal 0 rows_fetched_from_server_ps 0 rows_buffered_from_client_normal 0 rows_buffered_from_client_ps 0 rows_fetched_from_client_normal_buffered 0 rows_fetched_from_client_normal_unbuffered 0 rows_fetched_from_client_ps_buffered 0 rows_fetched_from_client_ps_unbuffered 0 rows_fetched_from_client_ps_cursor 0 rows_skipped_normal 0 rows_skipped_ps 0 copy_on_write_saved 0 copy_on_write_performed 0 command_buffer_too_small 0 connect_success 0 connect_failure 0 connection_reused 0 reconnect 0 pconnect_success 0 active_connections 0 active_persistent_connections 0 explicit_close 0 implicit_close 0 disconnect_close 0 in_middle_of_command_close 0 explicit_free_result 0 implicit_free_result 0 explicit_stmt_close 0 implicit_stmt_close 0 mem_emalloc_count 0 mem_emalloc_ammount 0 mem_ecalloc_count 0 mem_ecalloc_ammount 0 mem_erealloc_count 0 mem_erealloc_ammount 0 mem_efree_count 0 mem_malloc_count 0 mem_malloc_ammount 0 mem_calloc_count 0 mem_calloc_ammount 0 mem_realloc_count 0 mem_realloc_ammount 0 mem_free_count 0 proto_text_fetched_null 0 proto_text_fetched_bit 0 proto_text_fetched_tinyint 0 proto_text_fetched_short 0 proto_text_fetched_int24 0 proto_text_fetched_int 0 proto_text_fetched_bigint 0 proto_text_fetched_decimal 0 proto_text_fetched_float 0 proto_text_fetched_double 0 proto_text_fetched_date 0 proto_text_fetched_year 0 proto_text_fetched_time 0 proto_text_fetched_datetime 0 proto_text_fetched_timestamp 0 proto_text_fetched_string 0 proto_text_fetched_blob 0 proto_text_fetched_enum 0 proto_text_fetched_set 0 proto_text_fetched_geometry 0 proto_text_fetched_other 0 proto_binary_fetched_null 0 proto_binary_fetched_bit 0 proto_binary_fetched_tinyint 0 proto_binary_fetched_short 0 proto_binary_fetched_int24 0 proto_binary_fetched_int 0 proto_binary_fetched_bigint 0 proto_binary_fetched_decimal 0 proto_binary_fetched_float 0 proto_binary_fetched_double 0 proto_binary_fetched_date 0 proto_binary_fetched_year 0 proto_binary_fetched_time 0 proto_binary_fetched_datetime 0 proto_binary_fetched_timestamp 0 proto_binary_fetched_string 0 proto_binary_fetched_blob 0 proto_binary_fetched_enum 0 proto_binary_fetched_set 0 proto_binary_fetched_geometry 0 proto_binary_fetched_other 0 init_command_executed_count 0 init_command_failed_count 0 odbc ODBC Support enabled Active Persistent Links 0 Active Links 0 ODBC library Win32 Directive Local Value Master Value odbc.allow_persistent On On odbc.check_persistent On On odbc.default_cursortype Static cursor Static cursor odbc.default_db no value no value odbc.default_pw no value no value odbc.default_user no value no value odbc.defaultbinmode return as is return as is odbc.defaultlrl return up to 4096 bytes return up to 4096 bytes odbc.max_links Unlimited Unlimited odbc.max_persistent Unlimited Unlimited openssl OpenSSL support enabled OpenSSL Library Version OpenSSL 0.9.8l 5 Nov 2009 OpenSSL Header Version OpenSSL 0.9.8l 5 Nov 2009 pcre PCRE (Perl Compatible Regular Expressions) Support enabled PCRE Library Version 8.00 2009-10-19 Directive Local Value Master Value pcre.backtrack_limit 100000 100000 pcre.recursion_limit 100000 100000 pdf PDF Support enabled PDFlib GmbH Version 7.0.4p4 PECL Version 2.1.6 Revision $Revision: 277110 $ PDO PDO support enabled PDO drivers mysql, odbc, sqlite, sqlite2 pdo_mysql PDO Driver for MySQL enabled Client API version 5.1.41 PDO_ODBC PDO Driver for ODBC (Win32) enabled ODBC Connection Pooling Enabled, strict matching pdo_sqlite PDO Driver for SQLite 3.x enabled SQLite Library 3.6.20 Phar Phar: PHP Archive support enabled Phar EXT version 2.0.1 Phar API version 1.1.1 CVS revision $Revision: 286338 $ Phar-based phar archives enabled Tar-based phar archives enabled ZIP-based phar archives enabled gzip compression enabled bzip2 compression enabled Native OpenSSL support enabled Phar based on pear/PHP_Archive, original concept by Davey Shafik. Phar fully realized by Gregory Beaver and Marcus Boerger. Portions of tar implementation Copyright (c) 2003-2009 Tim Kientzle. Directive Local Value Master Value phar.cache_list no value no value phar.readonly On On phar.require_hash On On Reflection Reflection enabled Version $Revision: 287991 $ session Session Support enabled Registered save handlers files user sqlite Registered serializer handlers php php_binary wddx Directive Local Value Master Value session.auto_start Off Off session.bug_compat_42 On On session.bug_compat_warn On On session.cache_expire 180 180 session.cache_limiter nocache nocache session.cookie_domain no value no value session.cookie_httponly Off Off session.cookie_lifetime 0 0 session.cookie_path / / session.cookie_secure Off Off session.entropy_file no value no value session.entropy_length 0 0 session.gc_divisor 100 100 session.gc_maxlifetime 1440 1440 session.gc_probability 1 1 session.hash_bits_per_character 5 5 session.hash_function 0 0 session.name PHPSESSID PHPSESSID session.referer_check no value no value session.save_handler files files session.save_path C:\xampp\tmp C:\xampp\tmp session.serialize_handler php php session.use_cookies On On session.use_only_cookies Off Off session.use_trans_sid 0 0 SimpleXML Simplexml support enabled Revision $Revision: 281953 $ Schema support enabled soap Soap Client enabled Soap Server enabled Directive Local Value Master Value soap.wsdl_cache 1 1 soap.wsdl_cache_dir /tmp /tmp soap.wsdl_cache_enabled 1 1 soap.wsdl_cache_limit 5 5 soap.wsdl_cache_ttl 86400 86400 sockets Sockets Support enabled SPL SPL support enabled Interfaces Countable, OuterIterator, RecursiveIterator, SeekableIterator, SplObserver, SplSubject Classes AppendIterator, ArrayIterator, ArrayObject, BadFunctionCallException, BadMethodCallException, CachingIterator, DirectoryIterator, DomainException, EmptyIterator, FilesystemIterator, FilterIterator, GlobIterator, InfiniteIterator, InvalidArgumentException, IteratorIterator, LengthException, LimitIterator, LogicException, MultipleIterator, NoRewindIterator, OutOfBoundsException, OutOfRangeException, OverflowException, ParentIterator, RangeException, RecursiveArrayIterator, RecursiveCachingIterator, RecursiveDirectoryIterator, RecursiveFilterIterator, RecursiveIteratorIterator, RecursiveRegexIterator, RecursiveTreeIterator, RegexIterator, RuntimeException, SplDoublyLinkedList, SplFileInfo, SplFileObject, SplFixedArray, SplHeap, SplMinHeap, SplMaxHeap, SplObjectStorage, SplPriorityQueue, SplQueue, SplStack, SplTempFileObject, UnderflowException, UnexpectedValueException SQLite SQLite support enabled PECL Module version 2.0-dev $Id: sqlite.c 289598 2009-10-12 22:37:52Z pajoye $ SQLite Library 2.8.17 SQLite Encoding iso8859 Directive Local Value Master Value sqlite.assoc_case 0 0 sqlite3 SQLite3 support enabled SQLite3 module version 0.7-dev SQLite Library 3.6.20 Directive Local Value Master Value sqlite3.extension_dir no value no value standard Dynamic Library Support enabled Internal Sendmail Support for Windows enabled Directive Local Value Master Value assert.active 1 1 assert.bail 0 0 assert.callback no value no value assert.quiet_eval 0 0 assert.warning 1 1 auto_detect_line_endings 0 0 default_socket_timeout 60 60 safe_mode_allowed_env_vars PHP_ PHP_ safe_mode_protected_env_vars LD_LIBRARY_PATH LD_LIBRARY_PATH url_rewriter.tags a=href,area=href,frame=src,input=src,form=,fieldset= a=href,area=href,frame=src,input=src,form=,fieldset= user_agent no value no value tokenizer Tokenizer Support enabled wddx WDDX Support enabled WDDX Session Serializer enabled xml XML Support active XML Namespace Support active libxml2 Version 2.7.6 xmlreader XMLReader enabled xmlrpc core library version xmlrpc-epi v. 0.54 php extension version 0.51 author Dan Libby homepage http://xmlrpc-epi.sourceforge.net open sourced by Epinions.com xmlwriter XMLWriter enabled xsl XSL enabled libxslt Version 1.1.26 libxslt compiled against libxml Version 2.7.6 EXSLT enabled libexslt Version 1.1.26 zip Zip enabled Extension Version $Id: php_zip.c 276389 2009-02-24 23:55:14Z iliaa $ Zip version 1.9.1 Libzip version 0.9.0 zlib ZLib Support enabled Stream Wrapper support compress.zlib:// Stream Filter support zlib.inflate, zlib.deflate Compiled Version 1.2.3 Linked Version 1.2.3 Directive Local Value Master Value zlib.output_compression Off Off zlib.output_compression_level -1 -1 zlib.output_handler no value no value Additional Modules Module Name Environment Variable Value no value ::=::\ no value C:=C:\xampp ALLUSERSPROFILE C:\Documents and Settings\All Users APPDATA C:\Documents and Settings\Andrew\Application Data CHROME_RESTART Google Chrome|Whoa! Google Chrome has crashed. Restart now?|LEFT_TO_RIGHT CHROME_VERSION 5.0.342.8 CLASSPATH .;C:\Program Files\QuickTime\QTSystem\QTJava.zip CommonProgramFiles C:\Program Files\Common Files COMPUTERNAME ANDREW_LAPTOP ComSpec C:\WINDOWS\system32\cmd.exe FP_NO_HOST_CHECK NO HOMEDRIVE C: HOMEPATH \Documents and Settings\Andrew LOGONSERVER \\ANDREW_LAPTOP NUMBER_OF_PROCESSORS 2 OS Windows_NT PATH C:\Documents and Settings\Andrew\Local Settings\Application Data\Google\Chrome\Application;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;c:\Program Files\Microsoft SQL Server\100\Tools\Binn\;c:\Program Files\Microsoft SQL Server\100\DTS\Binn\;C:\Program Files\QuickTime\QTSystem\;C:\Program Files\Common Files\DivX Shared\;C:\Program Files\WiTopia.Net\bin PATHEXT .COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH PROCESSOR_ARCHITECTURE x86 PROCESSOR_IDENTIFIER x86 Family 6 Model 15 Stepping 10, GenuineIntel PROCESSOR_LEVEL 6 PROCESSOR_REVISION 0f0a ProgramFiles C:\Program Files PROMPT $P$G QTJAVA C:\Program Files\QuickTime\QTSystem\QTJava.zip SESSIONNAME Console sfxcmd "C:\Documents and Settings\Andrew\My Documents\Downloads\xampp-win32-1.7.3.exe" sfxname C:\Documents and Settings\Andrew\My Documents\Downloads\xampp-win32-1.7.3.exe SystemDrive C: SystemRoot C:\WINDOWS TEMP C:\DOCUME~1\Andrew\LOCALS~1\Temp TMP C:\DOCUME~1\Andrew\LOCALS~1\Temp USERDOMAIN ANDREW_LAPTOP USERNAME Andrew USERPROFILE C:\Documents and Settings\Andrew VS100COMNTOOLS C:\Program Files\Microsoft Visual Studio 10.0\Common7\Tools\ windir C:\WINDOWS AP_PARENT_PID 2216 PHP Variables Variable Value _SERVER["MIBDIRS"] C:/xampp/php/extras/mibs _SERVER["MYSQL_HOME"] C:\xampp\mysql\bin _SERVER["OPENSSL_CONF"] C:/xampp/apache/bin/openssl.cnf _SERVER["PHP_PEAR_SYSCONF_DIR"] C:\xampp\php _SERVER["PHPRC"] C:\xampp\php _SERVER["TMP"] C:\xampp\tmp _SERVER["HTTP_HOST"] localhost _SERVER["HTTP_CONNECTION"] keep-alive _SERVER["HTTP_USER_AGENT"] Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US) AppleWebKit/533.2 (KHTML, like Gecko) Chrome/5.0.342.8 Safari/533.2 _SERVER["HTTP_CACHE_CONTROL"] max-age=0 _SERVER["HTTP_ACCEPT"] application/xml,application/xhtml+xml,text/html;q=0.9,text/plain;q=0.8,image/png,*/*;q=0.5 _SERVER["HTTP_ACCEPT_ENCODING"] gzip,deflate,sdch _SERVER["HTTP_ACCEPT_LANGUAGE"] en-US,en;q=0.8 _SERVER["HTTP_ACCEPT_CHARSET"] ISO-8859-1,utf-8;q=0.7,*;q=0.3 _SERVER["PATH"] C:\Documents and Settings\Andrew\Local Settings\Application Data\Google\Chrome\Application;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;c:\Program Files\Microsoft SQL Server\100\Tools\Binn\;c:\Program Files\Microsoft SQL Server\100\DTS\Binn\;C:\Program Files\QuickTime\QTSystem\;C:\Program Files\Common Files\DivX Shared\;C:\Program Files\WiTopia.Net\bin _SERVER["SystemRoot"] C:\WINDOWS _SERVER["COMSPEC"] C:\WINDOWS\system32\cmd.exe _SERVER["PATHEXT"] .COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH _SERVER["WINDIR"] C:\WINDOWS _SERVER["SERVER_SIGNATURE"] <address>Apache/2.2.14 (Win32) DAV/2 mod_ssl/2.2.14 OpenSSL/0.9.8l mod_autoindex_color PHP/5.3.1 mod_apreq2-20090110/2.7.1 mod_perl/2.0.4 Perl/v5.10.1 Server at localhost Port 80</address> _SERVER["SERVER_SOFTWARE"] Apache/2.2.14 (Win32) DAV/2 mod_ssl/2.2.14 OpenSSL/0.9.8l mod_autoindex_color PHP/5.3.1 mod_apreq2-20090110/2.7.1 mod_perl/2.0.4 Perl/v5.10.1 _SERVER["SERVER_NAME"] localhost _SERVER["SERVER_ADDR"] 127.0.0.1 _SERVER["SERVER_PORT"] 80 _SERVER["REMOTE_ADDR"] 127.0.0.1 _SERVER["DOCUMENT_ROOT"] C:/xampp/htdocs _SERVER["SERVER_ADMIN"] postmaster@localhost _SERVER["SCRIPT_FILENAME"] C:/xampp/htdocs/test.php _SERVER["REMOTE_PORT"] 3275 _SERVER["GATEWAY_INTERFACE"] CGI/1.1 _SERVER["SERVER_PROTOCOL"] HTTP/1.1 _SERVER["REQUEST_METHOD"] GET _SERVER["QUERY_STRING"] no value _SERVER["REQUEST_URI"] /test.php _SERVER["SCRIPT_NAME"] /test.php _SERVER["PHP_SELF"] /test.php _SERVER["REQUEST_TIME"] 1270600868 _SERVER["argv"] Array ( ) _SERVER["argc"] 0 PHP License This program is free software; you can redistribute it and/or modify it under the terms of the PHP License as published by the PHP Group and included in the distribution in the file: LICENSE This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. If you did not receive a copy of the PHP license, or have any questions about PHP licensing, please contact [email protected].

Read the article

StackOverFlowError while creating Mac object on AS400/Java

- by Prasanna K Rao

Hello all, I am a newbie to AS400-Java programming. I am trying to create my first program to test the implementation of Message Authentication Code (MAC). I am trying to use the HMACSHA1 hash function. My (Java 1.4) program runs fine on a dev box (V5R4).But fails terribly on the QA box (V5R3). My program is as below: ===================================================== import java.security.InvalidKeyException; import java.security.NoSuchAlgorithmException; import java.security.Security; import java.security.Provider; import javax.crypto.Mac; import javax.crypto.spec.SecretKeySpec; import javax.crypto.SecretKey; public class Test01 { private static final String HMAC_SHA1_ALGORITHM = "HmacSHA1"; public static void main (String [] arguments) { byte[] key = { 1,2,3,4,5,6,7,8}; SecretKeySpec SHA1key = new SecretKeySpec(key, "HmacSHA1"); Mac hmac; String strFinalRslt = ""; try { hmac = Mac.getInstance("HmacSHA1"); hmac.init(SHA1key); byte[] result = hmac.doFinal(); strFinalRslt = toHexString(result); }catch (NoSuchAlgorithmException e) { // TODO Auto-generated catch block e.printStackTrace(); }catch (InvalidKeyException e) { // TODO Auto-generated catch block e.printStackTrace(); }catch(StackOverflowError e){ e.printStackTrace(); } System.out.println(strFinalRslt); System.out.println("All done!!!"); } public static byte[] fromHexString ( String s ) { int stringLength = s.length(); if ( (stringLength & 0x1) != 0 ) { throw new IllegalArgumentException ( "fromHexString requires an even number of hex characters" ); } byte[] b = new byte[stringLength / 2]; for ( int i=0,j=0; i 4] ); //look up low nibble char sb.append( hexChar [b[i] & 0x0f] ); } return sb.toString(); } static char[] hexChar = { '0' , '1' , '2' , '3' , '4' , '5' , '6' , '7' , '8' , '9' , 'a' , 'b' , 'c' , 'd' , 'e' , 'f'}; } This program compiles fine and gets the correct response on my win-xp client and also my dev box. But, fails with the following error on the QA box: java.lang.StackOverflowError at java.lang.Throwable.(Throwable.java:180) at java.lang.Error.(Error.java:37) at java.lang.StackOverflowError.(StackOverflowError.java:24) at java.io.Os400FileSystem.list(Native method) at java.io.File.list(File.java:922) at javax.crypto.b.e(Unknown source) at javax.crypto.b.a(Unknown source) at javax.crypto.b.c(Unknown source) at javax.crypto.b£0.run(Unknown source) at javax.crypto.b.(Unknown source) at javax.crypto.Mac.getInstance(Unknown source) I have verified the java.security file and entry corresponding to the jce files are all ok. The DMPJVM command gives me the following response: Thu Jun 03 12:25:34 E Java Virtual Machine Information 016822/QPGMR/11111 ........................................................................ . Classpath . ........................................................................ java.version=1.4 sun.boot.class.path=/QIBM/ProdData/OS400/Java400/jdk/lib/jdkptf14.zip:/QIBM /ProdData/OS400/Java400/ext/ibmjssefw.jar:/QIBM/ProdData/CAP/ibmjsseprovide r.jar:/QIBM/ProdData/OS400/Java400/ext/ibmjsseprovider2.jar:/QIBM/ProdData/ OS400/Java400/ext/ibmpkcs11impl.jar:/QIBM/ProdData/CAP/ibmjssefips.jar:/QIB M/ProdData/OS400/Java400/jdk/lib/IBMiSeriesJSSE.jar:/QIBM/ProdData/OS400/Ja va400/jdk/lib/jce.jar:/QIBM/ProdData/OS400/Java400/jdk/lib/jaas.jar:/QIBM/P rodData/OS400/Java400/jdk/lib/ibmcertpathfw.jar:/QIBM/ProdData/OS400/Java40 0/jdk/lib/ibmcertpathprovider.jar:/QIBM/ProdData/OS400/Java400/ext/ibmpkcs. jar:/QIBM/ProdData/OS400/Java400/jdk/lib/ibmjgssfw.jar:/QIBM/ProdData/OS400 /Java400/jdk/lib/ibmjgssprovider.jar:/QIBM/ProdData/OS400/Java400/jdk/lib/s ecurity.jar:/QIBM/ProdData/OS400/Java400/jdk/lib/charsets.jar:/QIBM/ProdDat a/OS400/Java400/jdk/lib/resources.jar:/QIBM/ProdData/OS400/Java400/jdk/lib/ rt.jar:/QIBM/ProdData/OS400/Java400/jdk/lib/sunrsasign.jar:/QIBM/ProdData/O S400/Java400/ext/IBMmisc.jar:/QIBM/ProdData/Java400/ java.class.path=/myhome/lib/commons-codec-1.3.jar:/myhome/lib/commons-httpc lient-3.1.jar:/myhome/lib/commons-logging-1.1.jar:/myhome/lib/log4j-1.2.15.jar:/myhome/lib/log4j-core.jar ; java.ext.dirs=/QIBM/ProdData/OS400/Java400/jdk/lib/ext:/QIBM/UserData/Java4 00/ext:/QIBM/ProdData/Java400/jdk14/lib/ext java.library.path=/QSYS.LIB/ROBOTLIB.LIB:/QSYS.LIB/QTEMP.LIB:/QSYS.LIB/ODIP GM.LIB:/QSYS.LIB/QGPL.LIB ........................................................................ . Garbage Collection . ........................................................................ Garbage collector parameters Initial size: 16384 K Max size: 240000000 K Current values Heap size: 437952 K Garbage collections: 58 Additional values JIT heap size: 53824 K JVM heap size: 55752 K Last GC cycle time: 1333 ms ........................................................................ . Thread information . ........................................................................ Information for 4 thread(s) of 4 thread(s) processed Thread: 00000004 Thread-0 TDE: B00380000BAA0000 Thread priority: 5 Thread status: Running Thread group: main Runnable: java/lang/Thread Stack: java/io/Os400FileSystem.list(Ljava/io/File;)[Ljava/lang/String;+0 (Os400FileSystem.java:0) java/io/File.list()[Ljava/lang/String;+19 (File.java:922) javax/crypto/b.e()[B+127 (:0) javax/crypto/b.a(Ljava/security/cert/X509Certificate;)V+7 (:0) javax/crypto/b.access$500(Ljava/security/cert/X509Certificate;)V+1 (:0) javax/crypto/b$0.run()Ljava/lang/Object;+98 (:0) javax/crypto/b.()V+507 (:0) javax/crypto/Mac.getInstance(Ljava/lang/String;)Ljavax/crypto/Mac;+10 (:0) Locks: None Thread: 00000007 jitcompilethread TDE: B00380000BD58000 Thread priority: 5 Thread status: Java wait Thread group: system Runnable: java/lang/Thread Stack: None Locks: None Thread: 00000005 Reference Handler TDE: B00380000BAAC000 Thread priority: 10 Thread status: Waiting Wait object: java/lang/ref/Reference$Lock Thread group: system Runnable: java/lang/ref/Reference$ReferenceHandler Stack: java/lang/Object.wait()V+1 (Object.java:452) java/lang/ref/Reference$ReferenceHandler.run()V+47 (Reference.java:169) Locks: None Thread: 00000006 Finalizer TDE: B00380000BAB3000 Thread priority: 8 Thread status: Waiting Wait object: java/lang/ref/ReferenceQueue$Lock Thread group: system Runnable: java/lang/ref/Finalizer$FinalizerThread Stack: java/lang/ref/ReferenceQueue.remove(J)Ljava/lang/ref/Reference;+43 (ReferenceQueue.java:111) java/lang/ref/ReferenceQueue.remove()Ljava/lang/ref/Reference;+1 (ReferenceQueue.java:127) java/lang/ref/Finalizer$FinalizerThread.run()V+3 (Finalizer.java:171) Locks: None ........................................................................ . Class loader information . ........................................................................ 0 Default class loader 1 sun/reflect/DelegatingClassLoader 2 sun/misc/Launcher$ExtClassLoader ........................................................................ . GC heap information . ........................................................................ Loader Objects Class name ------ ------- ---------- 0 1493 [C 0 2122181 java/lang/String 0 47 [Ljava/util/Hashtable$Entry; 0 68 [Ljava/lang/Object; 0 1016 java/lang/Class 0 31 java/util/HashMap 0 37 java/util/Hashtable 0 2 java/lang/ThreadGroup 0 2 java/lang/RuntimePermission 0 2 java/lang/ref/ReferenceQueue$Null 0 5 java/lang/ref/ReferenceQueue 0 50 java/util/Vector 0 4 java/util/Stack 0 3 sun/misc/SoftCache 0 1 [Ljava/lang/ThreadGroup; 0 5 [Ljava/io/ObjectStreamField; 0 1 sun/reflect/ReflectionFactory 0 7 java/lang/ref/ReferenceQueue$Lock 0 10 java/lang/Object 0 1 java/lang/String$CaseInsensitiveComparator 0 1 java/util/Hashtable$EmptyEnumerator 0 1 java/util/Hashtable$EmptyIterator 0 33 [Ljava/util/HashMap$Entry; 0 19210 [J 0 1 sun/nio/cs/StandardCharsets 0 5 java/util/TreeMap 0 1075 java/util/TreeMap$Entry 0 469 [Ljava/lang/String; 0 1 java/lang/StringBuffer 0 2 java/io/FileInputStream 0 2 java/io/FileOutputStream 0 2 java/io/BufferedOutputStream 0 1 java/lang/reflect/ReflectPermission 0 1 [[Ljava/lang/ref/SoftReference; 0 2 [Ljava/lang/ref/SoftReference; 0 2 sun/nio/cs/Surrogate$Parser 0 3 sun/misc/Signal 0 1 [Ljava/io/File; 0 6 java/io/File 0 1 java/util/BitSet 0 17 sun/reflect/NativeConstructorAccessorImpl 0 2 java/net/URLClassLoader$ClassFinder 0 12 java/util/ArrayList 0 32 java/io/RandomAccessFile 0 16 java/lang/Thread 0 1 java/lang/ref/Reference$ReferenceHandler 0 1 java/lang/ref/Finalizer$FinalizerThread 0 266 [B 0 2 java/util/Properties 0 71 java/lang/ref/Finalizer 0 2 com/ibm/nio/cs/DirectEncoder 0 38 java/lang/reflect/Constructor 0 33 java/util/jar/JarFile 0 19200 java/lang/StackOverflowError 0 5 java/security/AccessControlContext 0 2 [Ljava/lang/Thread; 0 4 java/lang/OutOfMemoryError 0 1065 java/util/Hashtable$Entry 0 1 java/io/BufferedInputStream 0 2 java/io/PrintStream 0 2 java/io/OutputStreamWriter 0 428 [I 0 3 java/lang/ClassLoader$NativeLibrary 0 25 java/util/Locale 0 3 sun/misc/URLClassPath 0 30 java/util/zip/Inflater 0 612 java/util/HashMap$Entry 0 2 java/io/FilePermission 0 10 java/io/ObjectStreamField 0 1 java/security/BasicPermissionCollection 0 2 java/security/ProtectionDomain 0 1 java/lang/Integer$1 0 1 java/lang/ref/Reference$Lock 0 1 java/lang/Shutdown$Lock 0 1 java/lang/Runtime 0 36 java/io/FileDescriptor 0 1 java/lang/Long$1 0 202 java/lang/Long 0 3 java/lang/ThreadLocal 0 3 java/nio/charset/CodingErrorAction 0 2 java/nio/charset/CoderResult 0 1 java/nio/charset/CoderResult$1 0 1 java/nio/charset/CoderResult$2 0 1 sun/misc/Unsafe 0 2 java/nio/ByteOrder 0 1 java/io/Os400FileSystem 0 3 java/lang/Boolean 0 1 java/lang/Terminator$1 0 23 java/lang/Integer 0 2 sun/misc/NativeSignalHandler 0 1 sun/misc/Launcher$Factory 0 1 sun/misc/Launcher 0 53 [Ljava/lang/Class; 0 1 java/lang/reflect/ReflectAccess 0 18 sun/reflect/DelegatingConstructorAccessorImpl 0 1 sun/net/www/protocol/file/Handler 0 3 java/util/HashSet 0 3 sun/net/www/protocol/jar/Handler 0 1 java/util/jar/JavaUtilJarAccessImpl 0 1 java/net/UnknownContentHandler 0 2 [Ljava/security/Principal; 0 10 [Ljava/security/cert/Certificate; 0 2 sun/misc/AtomicLongCSImpl 0 3 sun/reflect/DelegatingMethodAccessorImpl 0 1 sun/security/util/ByteArrayLexOrder 0 1 sun/security/util/ByteArrayTagOrder 0 7 sun/security/x509/CertificateVersion 0 7 sun/security/x509/CertificateSerialNumber 0 7 sun/security/x509/SerialNumber 0 7 sun/security/x509/CertificateAlgorithmId 0 7 sun/security/x509/CertificateIssuerName 0 60 sun/security/x509/RDN 0 60 [Lsun/security/x509/AVA; 0 67 sun/security/util/DerInputStream 0 3 [Ljava/math/BigInteger; 0 2 com/ibm/nio/cs/Converter 0 2 sun/nio/cs/StreamEncoder$CharsetSE 0 35 java/lang/ref/SoftReference 0 2 java/nio/HeapByteBuffer 0 2 java/io/BufferedWriter 0 33 sun/misc/URLClassPath$JarLoader 0 4 java/lang/ThreadLocal$ThreadLocalMap$Entry 0 76 java/net/URL 0 1 sun/misc/Launcher$ExtClassLoader 0 1 sun/misc/Launcher$AppClassLoader 0 4 java/lang/Throwable 0 7 java/lang/reflect/Method 0 2 sun/misc/URLClassPath$FileLoader 0 2 java/security/CodeSource 0 2 java/security/Permissions 0 2 java/io/FilePermissionCollection 0 1 java/lang/ThreadLocal$ThreadLocalMap 0 1 javax/crypto/spec/SecretKeySpec 0 17 java/util/jar/Attributes$Name 0 1 [Ljava/lang/ThreadLocal$ThreadLocalMap$Entry; 0 1 java/security/SecureRandom 0 2 sun/security/provider/Sun 0 1 java/util/jar/JarFile$JarFileEntry 0 1 java/util/jar/JarVerifier 0 3 sun/reflect/NativeMethodAccessorImpl 0 116 sun/security/util/ObjectIdentifier 0 1 java/lang/Package 0 2 [S 0 104 java/math/BigInteger 0 20 sun/security/x509/AlgorithmId 0 14 sun/security/x509/X500Name 0 14 [Lsun/security/x509/RDN; 0 60 sun/security/x509/AVA 0 67 sun/security/util/DerValue 0 67 sun/security/util/DerInputBuffer 0 21 sun/security/x509/AVAKeyword 0 6 sun/security/x509/X509CertImpl 0 7 sun/security/x509/X509CertInfo 0 1 [Lsun/security/util/ObjectIdentifier; 0 1 [[Ljava/lang/Byte; 0 3 [[B 0 7 sun/security/provider/DSAPublicKey 0 7 sun/security/x509/AuthorityKeyIdentifierExtension 0 12 [Ljava/lang/Byte; 0 14 java/lang/Byte 0 7 sun/security/x509/CertificateSubjectName 0 7 sun/security/x509/CertificateX509Key 0 14 sun/security/x509/KeyIdentifier 0 4 [Z 0 5 sun/text/Normalizer$Mode 0 7 sun/security/x509/CertificateValidity 0 14 java/util/Date 0 7 sun/security/provider/DSAParameters 0 7 sun/security/util/BitArray 0 7 sun/security/x509/CertificateExtensions 0 7 java/security/AlgorithmParameters 0 7 sun/security/x509/SubjectKeyIdentifierExtension 0 5 sun/security/x509/BasicConstraintsExtension 0 2 sun/security/x509/KeyUsageExtension 0 1 sun/text/CompactCharArray 0 1 sun/text/CompactByteArray 0 1 sun/net/www/protocol/jar/JarFileFactory 0 1 java/util/Collections$EmptySet 0 1 java/util/Collections$EmptyList 0 1 java/util/Collections$ReverseComparator 0 1 com/ibm/security/jgss/i18n/PropertyResource 0 1 javax/crypto/b$0 0 1 sun/security/provider/X509Factory 0 1 sun/reflect/BootstrapConstructorAccessorImpl 1 1 sun/reflect/GeneratedConstructorAccessor3202134454 2 1 com/ibm/crypto/provider/IBMJCE 0 6 java/util/ResourceBundle$LoaderReference 0 1 [Lsun/security/x509/NetscapeCertTypeExtension$MapEntry; 0 1 com/sun/rsajca/Provider 0 1 com/ibm/security/cert/IBMCertPath 0 1 com/ibm/as400/ibmonly/net/ssl/Provider 0 1 com/ibm/jsse/IBMJSSEProvider 0 1 com/ibm/security/jgss/IBMJGSSProvider 0 5 org/ietf/jgss/Oid 0 1 java/util/PropertyResourceBundle 0 7 java/util/ResourceBundle$ResourceCacheKey 0 2 sun/net/www/protocol/jar/URLJarFile 0 6 sun/misc/SoftCache$ValueCell 0 1 java/util/Random 0 1 java/util/Collections$EmptyMap 0 112 com/ibm/security/util/ObjectIdentifier 0 5 java/security/Security$ProviderProperty 0 1 java/security/cert/CertificateFactory 0 1 sun/security/provider/SecureRandom 0 2 java/security/MessageDigest$Delegate 0 2 sun/security/provider/SHA 0 1 sun/util/calendar/ZoneInfo 0 4 com/ibm/security/x509/X500Name 0 2 [Ljava/security/cert/X509Certificate; 0 1 sun/reflect/DelegatingClassLoader 0 1 sun/security/x509/NetscapeCertTypeExtension 0 7 sun/security/x509/NetscapeCertTypeExtension$MapEntry 0 3 [[Ljava/lang/String; 0 3 java/util/Arrays$ArrayList 0 7 com/ibm/security/x509/NetscapeCertTypeExtension$MapEntry 0 1 com/ibm/security/validator/EndEntityChecker 0 1 java/util/AbstractList$Itr 0 1 com/ibm/security/util/ByteArrayLexOrder 0 1 com/ibm/security/util/ByteArrayTagOrder 0 18 [Lcom/ibm/security/x509/AVA; 0 18 com/ibm/security/util/DerInputStream 0 5 com/ibm/security/util/text/Normalizer$Mode 0 1 com/ibm/security/validator/SimpleValidator 0 1 [Lcom/ibm/security/x509/NetscapeCertTypeExtension$MapEntry; 0 4 [Lcom/ibm/security/x509/RDN; 0 1 java/util/Hashtable$Enumerator 0 4 java/util/LinkedHashMap$Entry 0 1 sun/text/resources/LocaleElements 0 1 sun/text/resources/LocaleElements_en 0 22 com/ibm/security/x509/AVAKeyword 0 4 javax/security/auth/x500/X500Principal 0 18 com/ibm/security/x509/RDN 0 18 com/ibm/security/x509/AVA 0 18 com/ibm/security/util/DerInputBuffer 0 18 com/ibm/security/util/DerValue 0 1 com/ibm/security/util/text/CompactCharArray 0 1 com/ibm/security/util/text/CompactByteArray 0 2 java/util/LinkedHashMap 0 1 java/net/InetAddress$1 0 2 [Ljava/net/InetAddress; 0 2 java/net/InetAddress$Cache 0 1 java/net/Inet4AddressImpl 0 3 java/net/Inet4Address 0 2 java/net/InetAddress$CacheEntry ........................................................................ . Global registry information . ........................................................................ Loader Objects Class name ------ ------- ---------- 0 23 [C 0 1017 java/lang/Class 0 1 java/lang/ref/Reference$ReferenceHandler 0 1 java/lang/ref/Finalizer$FinalizerThread 0 1 sun/misc/Launcher$AppClassLoader 0 32 java/io/RandomAccessFile 0 32 [B Can someone please advise me? Thanks a lot, Prasanna

Read the article

SQLite, python, unicode, and non-utf data

- by Nathan Spears

I started by trying to store strings in sqlite using python, and got the message: sqlite3.ProgrammingError: You must not use 8-bit bytestrings unless you use a text_factory that can interpret 8-bit bytestrings (like text_factory = str). It is highly recommended that you instead just switch your application to Unicode strings. Ok, I switched to Unicode strings. Then I started getting the message: sqlite3.OperationalError: Could not decode to UTF-8 column 'tag_artist' with text 'Sigur Rós' when trying to retrieve data from the db. More research and I started encoding it in utf8, but then 'Sigur Rós' starts looking like 'Sigur RÃ³s' note: My console was set to display in 'latin_1' as @John Machin pointed out. What gives? After reading this, describing exactly the same situation I'm in, it seems as if the advice is to ignore the other advice and use 8-bit bytestrings after all. I didn't know much about unicode and utf before I started this process. I've learned quite a bit in the last couple hours, but I'm still ignorant of whether there is a way to correctly convert 'ó' from latin-1 to utf-8 and not mangle it. If there isn't, why would sqlite 'highly recommend' I switch my application to unicode strings? I'm going to update this question with a summary and some example code of everything I've learned in the last 24 hours so that someone in my shoes can have an easy(er) guide. If the information I post is wrong or misleading in any way please tell me and I'll update, or one of you senior guys can update. Summary of answers Let me first state the goal as I understand it. The goal in processing various encodings, if you are trying to convert between them, is to understand what your source encoding is, then convert it to unicode using that source encoding, then convert it to your desired encoding. Unicode is a base and encodings are mappings of subsets of that base. utf_8 has room for every character in unicode, but because they aren't in the same place as, for instance, latin_1, a string encoded in utf_8 and sent to a latin_1 console will not look the way you expect. In python the process of getting to unicode and into another encoding looks like: str.decode('source_encoding').encode('desired_encoding') or if the str is already in unicode str.encode('desired_encoding') For sqlite I didn't actually want to encode it again, I wanted to decode it and leave it in unicode format. Here are four things you might need to be aware of as you try to work with unicode and encodings in python. The encoding of the string you want to work with, and the encoding you want to get it to. The system encoding. The console encoding. The encoding of the source file Elaboration: (1) When you read a string from a source, it must have some encoding, like latin_1 or utf_8. In my case, I'm getting strings from filenames, so unfortunately, I could be getting any kind of encoding. Windows XP uses UCS-2 (a Unicode system) as its native string type, which seems like cheating to me. Fortunately for me, the characters in most filenames are not going to be made up of more than one source encoding type, and I think all of mine were either completely latin_1, completely utf_8, or just plain ascii (which is a subset of both of those). So I just read them and decoded them as if they were still in latin_1 or utf_8. It's possible, though, that you could have latin_1 and utf_8 and whatever other characters mixed together in a filename on Windows. Sometimes those characters can show up as boxes, other times they just look mangled, and other times they look correct (accented characters and whatnot). Moving on. (2) Python has a default system encoding that gets set when python starts and can't be changed during runtime. See here for details. Dirty summary ... well here's the file I added: \# sitecustomize.py \# this file can be anywhere in your Python path, \# but it usually goes in ${pythondir}/lib/site-packages/ import sys sys.setdefaultencoding('utf_8') This system encoding is the one that gets used when you use the unicode("str") function without any other encoding parameters. To say that another way, python tries to decode "str" to unicode based on the default system encoding. (3) If you're using IDLE or the command-line python, I think that your console will display according to the default system encoding. I am using pydev with eclipse for some reason, so I had to go into my project settings, edit the launch configuration properties of my test script, go to the Common tab, and change the console from latin-1 to utf-8 so that I could visually confirm what I was doing was working. (4) If you want to have some test strings, eg test_str = "ó" in your source code, then you will have to tell python what kind of encoding you are using in that file. (FYI: when I mistyped an encoding I had to ctrl-Z because my file became unreadable.) This is easily accomplished by putting a line like so at the top of your source code file: # -*- coding: utf_8 -*- If you don't have this information, python attempts to parse your code as ascii by default, and so: SyntaxError: Non-ASCII character '\xf3' in file _redacted_ on line 81, but no encoding declared; see http://www.python.org/peps/pep-0263.html for details Once your program is working correctly, or, if you aren't using python's console or any other console to look at output, then you will probably really only care about #1 on the list. System default and console encoding are not that important unless you need to look at output and/or you are using the builtin unicode() function (without any encoding parameters) instead of the string.decode() function. I wrote a demo function I will paste into the bottom of this gigantic mess that I hope correctly demonstrates the items in my list. Here is some of the output when I run the character 'ó' through the demo function, showing how various methods react to the character as input. My system encoding and console output are both set to utf_8 for this run: '?' = original char <type 'str'> repr(char)='\xf3' '?' = unicode(char) ERROR: 'utf8' codec can't decode byte 0xf3 in position 0: unexpected end of data 'ó' = char.decode('latin_1') <type 'unicode'> repr(char.decode('latin_1'))=u'\xf3' '?' = char.decode('utf_8') ERROR: 'utf8' codec can't decode byte 0xf3 in position 0: unexpected end of data Now I will change the system and console encoding to latin_1, and I get this output for the same input: 'ó' = original char <type 'str'> repr(char)='\xf3' 'ó' = unicode(char) <type 'unicode'> repr(unicode(char))=u'\xf3' 'ó' = char.decode('latin_1') <type 'unicode'> repr(char.decode('latin_1'))=u'\xf3' '?' = char.decode('utf_8') ERROR: 'utf8' codec can't decode byte 0xf3 in position 0: unexpected end of data Notice that the 'original' character displays correctly and the builtin unicode() function works now. Now I change my console output back to utf_8. '?' = original char <type 'str'> repr(char)='\xf3' '?' = unicode(char) <type 'unicode'> repr(unicode(char))=u'\xf3' '?' = char.decode('latin_1') <type 'unicode'> repr(char.decode('latin_1'))=u'\xf3' '?' = char.decode('utf_8') ERROR: 'utf8' codec can't decode byte 0xf3 in position 0: unexpected end of data Here everything still works the same as last time but the console can't display the output correctly. Etc. The function below also displays more information that this and hopefully would help someone figure out where the gap in their understanding is. I know all this information is in other places and more thoroughly dealt with there, but I hope that this would be a good kickoff point for someone trying to get coding with python and/or sqlite. Ideas are great but sometimes source code can save you a day or two of trying to figure out what functions do what. Disclaimers: I'm no encoding expert, I put this together to help my own understanding. I kept building on it when I should have probably started passing functions as arguments to avoid so much redundant code, so if I can I'll make it more concise. Also, utf_8 and latin_1 are by no means the only encoding schemes, they are just the two I was playing around with because I think they handle everything I need. Add your own encoding schemes to the demo function and test your own input. One more thing: there are apparently crazy application developers making life difficult in Windows. #!/usr/bin/env python # -*- coding: utf_8 -*- import os import sys def encodingDemo(str): validStrings = () try: print "str =",str,"{0} repr(str) = {1}".format(type(str), repr(str)) validStrings += ((str,""),) except UnicodeEncodeError as ude: print "Couldn't print the str itself because the console is set to an encoding that doesn't understand some character in the string. See error:\n\t", print ude try: x = unicode(str) print "unicode(str) = ",x validStrings+= ((x, " decoded into unicode by the default system encoding"),) except UnicodeDecodeError as ude: print "ERROR. unicode(str) couldn't decode the string because the system encoding is set to an encoding that doesn't understand some character in the string." print "\tThe system encoding is set to {0}. See error:\n\t".format(sys.getdefaultencoding()), print ude except UnicodeEncodeError as uee: print "ERROR. Couldn't print the unicode(str) because the console is set to an encoding that doesn't understand some character in the string. See error:\n\t", print uee try: x = str.decode('latin_1') print "str.decode('latin_1') =",x validStrings+= ((x, " decoded with latin_1 into unicode"),) try: print "str.decode('latin_1').encode('utf_8') =",str.decode('latin_1').encode('utf_8') validStrings+= ((x, " decoded with latin_1 into unicode and encoded into utf_8"),) except UnicodeDecodeError as ude: print "The string was decoded into unicode using the latin_1 encoding, but couldn't be encoded into utf_8. See error:\n\t", print ude except UnicodeDecodeError as ude: print "Something didn't work, probably because the string wasn't latin_1 encoded. See error:\n\t", print ude except UnicodeEncodeError as uee: print "ERROR. Couldn't print the str.decode('latin_1') because the console is set to an encoding that doesn't understand some character in the string. See error:\n\t", print uee try: x = str.decode('utf_8') print "str.decode('utf_8') =",x validStrings+= ((x, " decoded with utf_8 into unicode"),) try: print "str.decode('utf_8').encode('latin_1') =",str.decode('utf_8').encode('latin_1') except UnicodeDecodeError as ude: print "str.decode('utf_8').encode('latin_1') didn't work. The string was decoded into unicode using the utf_8 encoding, but couldn't be encoded into latin_1. See error:\n\t", validStrings+= ((x, " decoded with utf_8 into unicode and encoded into latin_1"),) print ude except UnicodeDecodeError as ude: print "str.decode('utf_8') didn't work, probably because the string wasn't utf_8 encoded. See error:\n\t", print ude except UnicodeEncodeError as uee: print "ERROR. Couldn't print the str.decode('utf_8') because the console is set to an encoding that doesn't understand some character in the string. See error:\n\t",uee print print "Printing information about each character in the original string." for char in str: try: print "\t'" + char + "' = original char {0} repr(char)={1}".format(type(char), repr(char)) except UnicodeDecodeError as ude: print "\t'?' = original char {0} repr(char)={1} ERROR PRINTING: {2}".format(type(char), repr(char), ude) except UnicodeEncodeError as uee: print "\t'?' = original char {0} repr(char)={1} ERROR PRINTING: {2}".format(type(char), repr(char), uee) print uee try: x = unicode(char) print "\t'" + x + "' = unicode(char) {1} repr(unicode(char))={2}".format(x, type(x), repr(x)) except UnicodeDecodeError as ude: print "\t'?' = unicode(char) ERROR: {0}".format(ude) except UnicodeEncodeError as uee: print "\t'?' = unicode(char) {0} repr(char)={1} ERROR PRINTING: {2}".format(type(x), repr(x), uee) try: x = char.decode('latin_1') print "\t'" + x + "' = char.decode('latin_1') {1} repr(char.decode('latin_1'))={2}".format(x, type(x), repr(x)) except UnicodeDecodeError as ude: print "\t'?' = char.decode('latin_1') ERROR: {0}".format(ude) except UnicodeEncodeError as uee: print "\t'?' = char.decode('latin_1') {0} repr(char)={1} ERROR PRINTING: {2}".format(type(x), repr(x), uee) try: x = char.decode('utf_8') print "\t'" + x + "' = char.decode('utf_8') {1} repr(char.decode('utf_8'))={2}".format(x, type(x), repr(x)) except UnicodeDecodeError as ude: print "\t'?' = char.decode('utf_8') ERROR: {0}".format(ude) except UnicodeEncodeError as uee: print "\t'?' = char.decode('utf_8') {0} repr(char)={1} ERROR PRINTING: {2}".format(type(x), repr(x), uee) print x = 'ó' encodingDemo(x) Much thanks for the answers below and especially to @John Machin for answering so thoroughly.

Read the article

SQLite, python, unicode, and non-utf data

- by Nathan Spears

I started by trying to store strings in sqlite using python, and got the message: sqlite3.ProgrammingError: You must not use 8-bit bytestrings unless you use a text_factory that can interpret 8-bit bytestrings (like text_factory = str). It is highly recommended that you instead just switch your application to Unicode strings. Ok, I switched to Unicode strings. Then I started getting the message: sqlite3.OperationalError: Could not decode to UTF-8 column 'tag_artist' with text 'Sigur Rós' when trying to retrieve data from the db. More research and I started encoding it in utf8, but then 'Sigur Rós' starts looking like 'Sigur RÃ³s' note: My console was set to display in 'latin_1' as @John Machin pointed out. What gives? After reading this, describing exactly the same situation I'm in, it seems as if the advice is to ignore the other advice and use 8-bit bytestrings after all. I didn't know much about unicode and utf before I started this process. I've learned quite a bit in the last couple hours, but I'm still ignorant of whether there is a way to correctly convert 'ó' from latin-1 to utf-8 and not mangle it. If there isn't, why would sqlite 'highly recommend' I switch my application to unicode strings? I'm going to update this question with a summary and some example code of everything I've learned in the last 24 hours so that someone in my shoes can have an easy(er) guide. If the information I post is wrong or misleading in any way please tell me and I'll update, or one of you senior guys can update. Summary of answers Let me first state the goal as I understand it. The goal in processing various encodings, if you are trying to convert between them, is to understand what your source encoding is, then convert it to unicode using that source encoding, then convert it to your desired encoding. Unicode is a base and encodings are mappings of subsets of that base. utf_8 has room for every character in unicode, but because they aren't in the same place as, for instance, latin_1, a string encoded in utf_8 and sent to a latin_1 console will not look the way you expect. In python the process of getting to unicode and into another encoding looks like: str.decode('source_encoding').encode('desired_encoding') or if the str is already in unicode str.encode('desired_encoding') For sqlite I didn't actually want to encode it again, I wanted to decode it and leave it in unicode format. Here are four things you might need to be aware of as you try to work with unicode and encodings in python. The encoding of the string you want to work with, and the encoding you want to get it to. The system encoding. The console encoding. The encoding of the source file Elaboration: (1) When you read a string from a source, it must have some encoding, like latin_1 or utf_8. In my case, I'm getting strings from filenames, so unfortunately, I could be getting any kind of encoding. Windows XP uses UCS-2 (a Unicode system) as its native string type, which seems like cheating to me. Fortunately for me, the characters in most filenames are not going to be made up of more than one source encoding type, and I think all of mine were either completely latin_1, completely utf_8, or just plain ascii (which is a subset of both of those). So I just read them and decoded them as if they were still in latin_1 or utf_8. It's possible, though, that you could have latin_1 and utf_8 and whatever other characters mixed together in a filename on Windows. Sometimes those characters can show up as boxes, other times they just look mangled, and other times they look correct (accented characters and whatnot). Moving on. (2) Python has a default system encoding that gets set when python starts and can't be changed during runtime. See here for details. Dirty summary ... well here's the file I added: \# sitecustomize.py \# this file can be anywhere in your Python path, \# but it usually goes in ${pythondir}/lib/site-packages/ import sys sys.setdefaultencoding('utf_8') This system encoding is the one that gets used when you use the unicode("str") function without any other encoding parameters. To say that another way, python tries to decode "str" to unicode based on the default system encoding. (3) If you're using IDLE or the command-line python, I think that your console will display according to the default system encoding. I am using pydev with eclipse for some reason, so I had to go into my project settings, edit the launch configuration properties of my test script, go to the Common tab, and change the console from latin-1 to utf-8 so that I could visually confirm what I was doing was working. (4) If you want to have some test strings, eg test_str = "ó" in your source code, then you will have to tell python what kind of encoding you are using in that file. (FYI: when I mistyped an encoding I had to ctrl-Z because my file became unreadable.) This is easily accomplished by putting a line like so at the top of your source code file: # -*- coding: utf_8 -*- If you don't have this information, python attempts to parse your code as ascii by default, and so: SyntaxError: Non-ASCII character '\xf3' in file _redacted_ on line 81, but no encoding declared; see http://www.python.org/peps/pep-0263.html for details Once your program is working correctly, or, if you aren't using python's console or any other console to look at output, then you will probably really only care about #1 on the list. System default and console encoding are not that important unless you need to look at output and/or you are using the builtin unicode() function (without any encoding parameters) instead of the string.decode() function. I wrote a demo function I will paste into the bottom of this gigantic mess that I hope correctly demonstrates the items in my list. Here is some of the output when I run the character 'ó' through the demo function, showing how various methods react to the character as input. My system encoding and console output are both set to utf_8 for this run: '?' = original char <type 'str'> repr(char)='\xf3' '?' = unicode(char) ERROR: 'utf8' codec can't decode byte 0xf3 in position 0: unexpected end of data 'ó' = char.decode('latin_1') <type 'unicode'> repr(char.decode('latin_1'))=u'\xf3' '?' = char.decode('utf_8') ERROR: 'utf8' codec can't decode byte 0xf3 in position 0: unexpected end of data Now I will change the system and console encoding to latin_1, and I get this output for the same input: 'ó' = original char <type 'str'> repr(char)='\xf3' 'ó' = unicode(char) <type 'unicode'> repr(unicode(char))=u'\xf3' 'ó' = char.decode('latin_1') <type 'unicode'> repr(char.decode('latin_1'))=u'\xf3' '?' = char.decode('utf_8') ERROR: 'utf8' codec can't decode byte 0xf3 in position 0: unexpected end of data Notice that the 'original' character displays correctly and the builtin unicode() function works now. Now I change my console output back to utf_8. '?' = original char <type 'str'> repr(char)='\xf3' '?' = unicode(char) <type 'unicode'> repr(unicode(char))=u'\xf3' '?' = char.decode('latin_1') <type 'unicode'> repr(char.decode('latin_1'))=u'\xf3' '?' = char.decode('utf_8') ERROR: 'utf8' codec can't decode byte 0xf3 in position 0: unexpected end of data Here everything still works the same as last time but the console can't display the output correctly. Etc. The function below also displays more information that this and hopefully would help someone figure out where the gap in their understanding is. I know all this information is in other places and more thoroughly dealt with there, but I hope that this would be a good kickoff point for someone trying to get coding with python and/or sqlite. Ideas are great but sometimes source code can save you a day or two of trying to figure out what functions do what. Disclaimers: I'm no encoding expert, I put this together to help my own understanding. I kept building on it when I should have probably started passing functions as arguments to avoid so much redundant code, so if I can I'll make it more concise. Also, utf_8 and latin_1 are by no means the only encoding schemes, they are just the two I was playing around with because I think they handle everything I need. Add your own encoding schemes to the demo function and test your own input. One more thing: there are apparently crazy application developers making life difficult in Windows. #!/usr/bin/env python # -*- coding: utf_8 -*- import os import sys def encodingDemo(str): validStrings = () try: print "str =",str,"{0} repr(str) = {1}".format(type(str), repr(str)) validStrings += ((str,""),) except UnicodeEncodeError as ude: print "Couldn't print the str itself because the console is set to an encoding that doesn't understand some character in the string. See error:\n\t", print ude try: x = unicode(str) print "unicode(str) = ",x validStrings+= ((x, " decoded into unicode by the default system encoding"),) except UnicodeDecodeError as ude: print "ERROR. unicode(str) couldn't decode the string because the system encoding is set to an encoding that doesn't understand some character in the string." print "\tThe system encoding is set to {0}. See error:\n\t".format(sys.getdefaultencoding()), print ude except UnicodeEncodeError as uee: print "ERROR. Couldn't print the unicode(str) because the console is set to an encoding that doesn't understand some character in the string. See error:\n\t", print uee try: x = str.decode('latin_1') print "str.decode('latin_1') =",x validStrings+= ((x, " decoded with latin_1 into unicode"),) try: print "str.decode('latin_1').encode('utf_8') =",str.decode('latin_1').encode('utf_8') validStrings+= ((x, " decoded with latin_1 into unicode and encoded into utf_8"),) except UnicodeDecodeError as ude: print "The string was decoded into unicode using the latin_1 encoding, but couldn't be encoded into utf_8. See error:\n\t", print ude except UnicodeDecodeError as ude: print "Something didn't work, probably because the string wasn't latin_1 encoded. See error:\n\t", print ude except UnicodeEncodeError as uee: print "ERROR. Couldn't print the str.decode('latin_1') because the console is set to an encoding that doesn't understand some character in the string. See error:\n\t", print uee try: x = str.decode('utf_8') print "str.decode('utf_8') =",x validStrings+= ((x, " decoded with utf_8 into unicode"),) try: print "str.decode('utf_8').encode('latin_1') =",str.decode('utf_8').encode('latin_1') except UnicodeDecodeError as ude: print "str.decode('utf_8').encode('latin_1') didn't work. The string was decoded into unicode using the utf_8 encoding, but couldn't be encoded into latin_1. See error:\n\t", validStrings+= ((x, " decoded with utf_8 into unicode and encoded into latin_1"),) print ude except UnicodeDecodeError as ude: print "str.decode('utf_8') didn't work, probably because the string wasn't utf_8 encoded. See error:\n\t", print ude except UnicodeEncodeError as uee: print "ERROR. Couldn't print the str.decode('utf_8') because the console is set to an encoding that doesn't understand some character in the string. See error:\n\t",uee print print "Printing information about each character in the original string." for char in str: try: print "\t'" + char + "' = original char {0} repr(char)={1}".format(type(char), repr(char)) except UnicodeDecodeError as ude: print "\t'?' = original char {0} repr(char)={1} ERROR PRINTING: {2}".format(type(char), repr(char), ude) except UnicodeEncodeError as uee: print "\t'?' = original char {0} repr(char)={1} ERROR PRINTING: {2}".format(type(char), repr(char), uee) print uee try: x = unicode(char) print "\t'" + x + "' = unicode(char) {1} repr(unicode(char))={2}".format(x, type(x), repr(x)) except UnicodeDecodeError as ude: print "\t'?' = unicode(char) ERROR: {0}".format(ude) except UnicodeEncodeError as uee: print "\t'?' = unicode(char) {0} repr(char)={1} ERROR PRINTING: {2}".format(type(x), repr(x), uee) try: x = char.decode('latin_1') print "\t'" + x + "' = char.decode('latin_1') {1} repr(char.decode('latin_1'))={2}".format(x, type(x), repr(x)) except UnicodeDecodeError as ude: print "\t'?' = char.decode('latin_1') ERROR: {0}".format(ude) except UnicodeEncodeError as uee: print "\t'?' = char.decode('latin_1') {0} repr(char)={1} ERROR PRINTING: {2}".format(type(x), repr(x), uee) try: x = char.decode('utf_8') print "\t'" + x + "' = char.decode('utf_8') {1} repr(char.decode('utf_8'))={2}".format(x, type(x), repr(x)) except UnicodeDecodeError as ude: print "\t'?' = char.decode('utf_8') ERROR: {0}".format(ude) except UnicodeEncodeError as uee: print "\t'?' = char.decode('utf_8') {0} repr(char)={1} ERROR PRINTING: {2}".format(type(x), repr(x), uee) print x = 'ó' encodingDemo(x) Much thanks for the answers below and especially to @John Machin for answering so thoroughly.

Read the article

Can't connect to SSL web service with WS-Security using PHP SOAP extension - certificate, complex WSDL

- by BillF

Using the PHP5 SOAP extension I have been unable to connect to a web service having an https endpoint, with client certificate and using WS-Security, although I can connect using soapUI with the exact same wsdl and client certificate, and obtain the normal response to the request. There is no HTTP authentication and no proxy is involved. The message I get is 'Could not connect to host'. Have been able to verify that I am NOT hitting the host server. (Earlier I wrongly said that I was hitting the server.) The self-signed client SSL certificate is a .pem file converted by openssl from a .p12 keystore which in turn was converted by keytool from a .jks keystore having a single entry consisting of private key and client certificate. In soapUI I did not need to supply a server private certificate, the only two files I gave it were the wdsl and pem. I did have to supply the pem and its passphrase to be able to connect. I am speculating that despite the error message my problem might actually be in the formation of the XML request rather than the SSL connection itself. The wsdl I have been given has nested complex types. The php server is on my Windows XP laptop with IIS. The code, data values and WSDL extracts are shown below. (The WSSoapClient class simply extends SoapClient, adding a WS-Security Username Token header with mustUnderstand = true and including a nonce, both of which the soapUI call had required.) Would so much appreciate any help. I'm a newbie thrown in at the deep end, and how! Have done vast amounts of Googling on this over many days, following many suggestions and have read Pro PHP by Kevin McArthur. An attempt to use classmaps in place of nested arrays also fell flat. The Code class STEeService { public function invokeWebService(array $connection, $operation, array $request) { try { $localCertificateFilespec = $connection['localCertificateFilespec']; $localCertificatePassphrase = $connection['localCertificatePassphrase']; $sslOptions = array( 'ssl' => array( 'local_cert' => $localCertificateFilespec, 'passphrase' => $localCertificatePassphrase, 'allow_self-signed' => true, 'verify_peer' => false ) ); $sslContext = stream_context_create($sslOptions); $clientArguments = array( 'stream_context' => $sslContext, 'local_cert' => $localCertificateFilespec, 'passphrase' => $localCertificatePassphrase, 'trace' => true, 'exceptions' => true, 'encoding' => 'UTF-8', 'soap_version' => SOAP_1_1 ); $oClient = new WSSoapClient($connection['wsdlFilespec'], $clientArguments); $oClient->__setUsernameToken($connection['username'], $connection['password']); return $oClient->__soapCall($operation, $request); } catch (exception $e) { throw new Exception("Exception in eServices " . $operation . " ," . $e->getMessage(), "\n"); } } } $connection is as follows: array(5) { ["username"]=> string(8) "DFU00050" ["password"]=> string(10) "Fabricate1" ["wsdlFilespec"]=> string (63) "c:/inetpub/wwwroot/DMZExternalService_Concrete_WSDL_Staging.xml" ["localCertificateFilespec"]=> string(37) "c:/inetpub/wwwroot/ClientKeystore.pem" ["localCertificatePassphrase"]=> string(14) "password123456" } $clientArguments is as follows: array(7) { ["stream_context"]=> resource(8) of type (stream-context) ["local_cert"]=> string(37) "c:/inetpub/wwwroot/ClientKeystore.pem" ["passphrase"]=> string(14) "password123456" ["trace"]=> bool(true) ["exceptions"]=> bool(true) ["encoding"]=> string(5) "UTF-8" ["soap_version"]=> int(1) } $operation is as follows: 'getConsignmentDetails' $request is as follows: array(1) { [0]=> array(2) { ["header"]=> array(2) { ["source"]=> string(9) "customerA" ["accountNo"]=> string(8) "10072906" } ["consignmentId"]=> string(11) "GKQ00000085" } } Note how there is an extra level of nesting, an array wrapping the request which is itself an array. This was suggested in a post although I don't see the reason, but it seems to help avoid other exceptions. The exception thrown by ___soapCall is as follows: object(SoapFault)#6 (9) { ["message":protected]=> string(25) "Could not connect to host" ["string":"Exception":private]=> string(0) "" ["code":protected]=> int(0) ["file":protected]=> string(43) "C:\Inetpub\wwwroot\eServices\WSSecurity.php" ["line":protected]=> int(85) ["trace":"Exception":private]=> array(5) { [0]=> array(6) { ["file"]=> string(43) "C:\Inetpub\wwwroot\eServices\WSSecurity.php" ["line"]=> int(85) ["function"]=> string(11) "__doRequest" ["class"]=> string(10) "SoapClient" ["type"]=> string(2) "->" ["args"]=> array(4) { [0]=> string(1240) " DFU00050 Fabricate1 E0ByMUA= 2010-10-28T13:13:52Z customerA10072906GKQ00000085 " [1]=> string(127) "https://services.startrackexpress.com.au:7560/DMZExternalService/InterfaceServices/ExternalOps.serviceagent/OperationsEndpoint1" [2]=> string(104) "/DMZExternalService/InterfaceServices/ExternalOps.serviceagent/OperationsEndpoint1/getConsignmentDetails" [3]=> int(1) } } [1]=> array(4) { ["function"]=> string(11) "__doRequest" ["class"]=> string(39) "startrackexpress\eservices\WSSoapClient" ["type"]=> string(2) "->" ["args"]=> array(5) { [0]=> string(1240) " DFU00050 Fabricate1 E0ByMUA= 2010-10-28T13:13:52Z customerA10072906GKQ00000085 " [1]=> string(127) "https://services.startrackexpress.com.au:7560/DMZExternalService/InterfaceServices/ExternalOps.serviceagent/OperationsEndpoint1" [2]=> string(104) "/DMZExternalService/InterfaceServices/ExternalOps.serviceagent/OperationsEndpoint1/getConsignmentDetails" [3]=> int(1) [4]=> int(0) } } [2]=> array(6) { ["file"]=> string(43) "C:\Inetpub\wwwroot\eServices\WSSecurity.php" ["line"]=> int(70) ["function"]=> string(10) "__soapCall" ["class"]=> string(10) "SoapClient" ["type"]=> string(2) "->" ["args"]=> array(4) { [0]=> string(21) "getConsignmentDetails" [1]=> array(1) { [0]=> array(2) { ["header"]=> array(2) { ["source"]=> string(9) "customerA" ["accountNo"]=> string(8) "10072906" } ["consignmentId"]=> string(11) "GKQ00000085" } } [2]=> NULL [3]=> object(SoapHeader)#5 (4) { ["namespace"]=> string(81) "http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd" ["name"]=> string(8) "Security" ["data"]=> object(SoapVar)#4 (2) { ["enc_type"]=> int(147) ["enc_value"]=> string(594) " DFU00050 Fabricate1 E0ByMUA= 2010-10-28T13:13:52Z " } ["mustUnderstand"]=> bool(true) } } } [3]=> array(6) { ["file"]=> string(42) "C:\Inetpub\wwwroot\eServices\eServices.php" ["line"]=> int(87) ["function"]=> string(10) "__soapCall" ["class"]=> string(39) "startrackexpress\eservices\WSSoapClient" ["type"]=> string(2) "->" ["args"]=> array(2) { [0]=> string(21) "getConsignmentDetails" [1]=> array(1) { [0]=> array(2) { ["header"]=> array(2) { ["source"]=> string(9) "customerA" ["accountNo"]=> string(8) "10072906" } ["consignmentId"]=> string(11) "GKQ00000085" } } } } [4]=> array(6) { ["file"]=> string(58) "C:\Inetpub\wwwroot\eServices\EnquireConsignmentDetails.php" ["line"]=> int(44) ["function"]=> string(16) "invokeWebService" ["class"]=> string(38) "startrackexpress\eservices\STEeService" ["type"]=> string(2) "->" ["args"]=> array(3) { [0]=> array(5) { ["username"]=> string(10) "DFU00050 " ["password"]=> string(12) "Fabricate1 " ["wsdlFilespec"]=> string(63) "c:/inetpub/wwwroot/DMZExternalService_Concrete_WSDL_Staging.xml" ["localCertificateFilespec"]=> string(37) "c:/inetpub/wwwroot/ClientKeystore.pem" ["localCertificatePassphrase"]=> string(14) "password123456" } [1]=> string(21) "getConsignmentDetails" [2]=> array(1) { [0]=> array(2) { ["header"]=> array(2) { ["source"]=> string(9) "customerA" ["accountNo"]=> string(8) "10072906" } ["consignmentId"]=> string(11) "GKQ00000085" } } } } } ["previous":"Exception":private]=> NULL ["faultstring"]=> string(25) "Could not connect to host" ["faultcode"]=> string(4) "HTTP" } Here are some WSDL extracts (TIBCO BusinessWorks): <xsd:complexType name="TransactionHeaderType"> <xsd:sequence> <xsd:element name="source" type="xsd:string"/> <xsd:element name="accountNo" type="xsd:integer"/> <xsd:element name="userId" type="xsd:string" minOccurs="0"/> <xsd:element name="transactionId" type="xsd:string" minOccurs="0"/> <xsd:element name="transactionDatetime" type="xsd:dateTime" minOccurs="0"/> </xsd:sequence> </xsd:complexType> <xsd:element name="getConsignmentDetailRequest"> <xsd:complexType> <xsd:sequence> <xsd:element name="header" type="prim:TransactionHeaderType"/> <xsd:element name="consignmentId" type="prim:ID" maxOccurs="unbounded"/> </xsd:sequence> </xsd:complexType> </xsd:element> <xsd:element name="getConsignmentDetailResponse"> <xsd:complexType> <xsd:sequence> <xsd:element name="consignment" type="freight:consignmentType" minOccurs="0" maxOccurs="unbounded"/> </xsd:sequence> </xsd:complexType> </xsd:element> <xsd:element name="getConsignmentDetailRequest"> <xsd:complexType> <xsd:sequence> <xsd:element name="header" type="prim:TransactionHeaderType"/> <xsd:element name="consignmentId" type="prim:ID" maxOccurs="unbounded"/> </xsd:sequence> </xsd:complexType> </xsd:element> <xsd:element name="getConsignmentDetailResponse"> <xsd:complexType> <xsd:sequence> <xsd:element name="consignment" type="freight:consignmentType" minOccurs="0" maxOccurs="unbounded"/> </xsd:sequence> </xsd:complexType> </xsd:element> <wsdl:operation name="getConsignmentDetails"> <wsdl:input message="tns:getConsignmentDetailsRequest"/> <wsdl:output message="tns:getConsignmentDetailsResponse"/> <wsdl:fault name="fault1" message="tns:fault"/> </wsdl:operation> <wsdl:service name="ExternalOps"> <wsdl:port name="OperationsEndpoint1" binding="tns:OperationsEndpoint1Binding"> <soap:address location="https://services.startrackexpress.com.au:7560/DMZExternalService/InterfaceServices/ExternalOps.serviceagent/OperationsEndpoint1"/> </wsdl:port> </wsdl:service> And here in case it's relevant is the WSSoapClient class: <?PHP namespace startrackexpress\eservices; use SoapClient, SoapVar, SoapHeader; class WSSoapClient extends SoapClient { private $username; private $password; /*Generates a WS-Security header*/ private function wssecurity_header() { $timestamp = gmdate('Y-m-d\TH:i:s\Z'); $nonce = mt_rand(); $passdigest = base64_encode(pack('H*', sha1(pack('H*', $nonce).pack('a*', $timestamp).pack('a*', $this->password)))); $auth = ' <wsse:Security SOAP-ENV:mustUnderstand="1" xmlns:wsse="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd"> <wsse:UsernameToken> <wsse:Username>' . $this->username . '</wsse:Username> <wsse:Password Type="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-username-token-profile-1.0#PasswordText">' . $this->password . '</wsse:Password> <wsse:Nonce>' . base64_encode(pack('H*', $nonce)).'</wsse:Nonce> <wsu:Created xmlns:wsu="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd">' . $timestamp . '</wsu:Created> </wsse:UsernameToken> </wsse:Security> '; $authvalues = new SoapVar($auth, XSD_ANYXML); $header = new SoapHeader("http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd", "Security",$authvalues, true); return $header; } // Sets a username and passphrase public function __setUsernameToken($username,$password) { $this->username=$username; $this->password=$password; } // Overwrites the original method, adding the security header public function __soapCall($function_name, $arguments, $options=null, $input_headers=null, $output_headers=null) { try { $result = parent::__soapCall($function_name, $arguments, $options, $this->wssecurity_header()); return $result; } catch (exception $e) { throw new Exception("Exception in __soapCall, " . $e->getMessage(), "\n"); } } } ?> Update: The request XML would have been as follows: <?xml version="1.0" encoding="UTF-8"?> <SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" xmlns:ns1="http://startrackexpress/Common/Primitives/v1" xmlns:ns2="http://startrackexpress/Common/actions/externals/Consignment/v1" xmlns:ns3="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd"> <SOAP-ENV:Header> <wsse:Security SOAP-ENV:mustUnderstand="1" xmlns:wsse="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd"> <wsse:UsernameToken> <wsse:Username>DFU00050</wsse:Username> <wsse:Password Type="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-username-token-profile-1.0#PasswordText">Fabricate1</wsse:Password> <wsse:Nonce>M4FIeGA=</wsse:Nonce> <wsu:Created xmlns:wsu="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd">2010-10-29T14:05:27Z</wsu:Created> </wsse:UsernameToken> </wsse:Security> </SOAP-ENV:Header> <SOAP-ENV:Body><ns2:getConsignmentDetailRequest> <ns2:header><ns1:source>customerA</ns1:source><ns1:accountNo>10072906</ns1:accountNo></ns2:header> <ns2:consignmentId>GKQ00000085</ns2:consignmentId> </ns2:getConsignmentDetailRequest></SOAP-ENV:Body> </SOAP-ENV:Envelope> This was obtained with the following code in WSSoapClient: public function __doRequest($request, $location, $action, $version) { echo "<p> " . htmlspecialchars($request) . " </p>" ; return parent::__doRequest($request, $location, $action, $version); }

Read the article

Can ping device from one computer and not the other

- by Sean Duggan

I've recently been assigned to work on a diagnostic program done in C++ which communicates with a piece of electronic equipment. Our normal scenario involves communicating via an RS232 interface, but I've been asked to make our program work over ethernet, source code having been done in Visual Basic. After much thrashing about trying to get the code to work and continuing to get 10049 Winsock errors when I tried to connect, I tried pinging the switch. From the computer the VB program is running on, I can see the switch via ping, nslookup, tracert, and pathping (I was going down the list of programs) and I can do this via URI or IP address. From my laptop, sending the same commands fails every time. They're both using the same network cable and the same USB-to-Ethernet device (I've been swapping them between tests) but one can see the switch and the other cannot. I'm working on the programming end, but the ping results makes me think that there might be a network issue stymieing me. wry grin I'm not much of a network guy, so I'm appealing to expert assistance. Both computers are running Windows XP if that helps. The connection is to an "IP-RS8" device which then connects to our VCU-C units. Each unit is accessible via URI or IP address on the desktop computer we usually have connected to the units (it's running the older VB program that I was asked to lift the networking code from). The connection is made via a USB-to-Ethernet adapter so as to leave the regular Ethernet port available for connecting to the company network. Hmm... come to think of it, I've probably been confusing the issue, talking about pinging "the switch" rather than indicating that it's the devices. My apologies. Communication is generally done with a DLL that uses Winsock functions to make queries for data from the VCU and then to receive. I'm failing when connecting. I haven't found anything on the firewall which should block these commands, but I'll keep poking. I don't know if it's potentially relevant, but on the desktop, the adapter maps to Local Area Connection 3 while on the laptop, it consistently maps to Local Area Connection 2. Currently reading up on DHCP. IPConfig /all results: Desktop Host Name . . . . . . . . . . . . : AMERDAEXXXXXX Primary Dns Suffix . . . . . . . : amer.example.com Node Type . . . . . . . . . . . . : Hybrid IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : No DNS Suffix Search List. . . . . . : COMPANY.com amer.example.com atle.example.com cone.example.com apac.example.com scan.example.com bYX.example.com Ethernet adapter Local Area Connection X: Connection-specific DNS Suffix . : amer.example.com Description . . . . . . . . . . . : Broadcom NetXtreme XYxx Gigabit Controller Physical Address. . . . . . . . . : YY-XX-YB-XX-XX-XX Dhcp Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes IP Address. . . . . . . . . . . . : XYY.XXX.XY.XXX Subnet Mask . . . . . . . . . . . : XXX.XXX.XXY.Y Default Gateway . . . . . . . . . : XYY.XXX.XY.X DHCP Server . . . . . . . . . . . : XY.XXX.XXY.XX DNS Servers . . . . . . . . . . . : XY.XXX.XXY.XX XY.XXY.XXY.XX Primary WINS Server . . . . . . . : XY.XXX.XXY.X Secondary WINS Server . . . . . . : XY.XXY.XXY.X Lease Obtained. . . . . . . . . . : Thursday, July XX, XYXX XY:XX:XX AM Lease Expires . . . . . . . . . . : Sunday, July XX, XYXX XY:XX:XX AM Ethernet adapter Local Area Connection X: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : ASIX axYYYYX USBX.Y to Fast Ethernet Adapter Physical Address. . . . . . . . . : YY-XY-BY-YX-XY-AY Dhcp Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes IP Address. . . . . . . . . . . . : XY.Y.Y.X Subnet Mask . . . . . . . . . . . : XXX.XXX.XXY.Y Default Gateway . . . . . . . . . : XY.Y.Y.X DHCP Server . . . . . . . . . . . : XY.Y.Y.XY DNS Servers . . . . . . . . . . . : XY.Y.Y.X Lease Obtained. . . . . . . . . . : Thursday, July XX, XYXX XY:XX:XY AM Lease Expires . . . . . . . . . . : Tuesday, August YX, XYXX XX:XY:XY AM Laptop Windows IP Configuration Host Name . . . . . . . . . . . . : AMERLAFYYXXYX Primary Dns Suffix . . . . . . . : amer.example.com Node Type . . . . . . . . . . . . : Hybrid IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : No DNS Suffix Search List. . . . . . : COMPANY.com amer.example.com atle.example.com cone.example.com apac.example.com scan.example.com bYX.example.com Ethernet adapter Local Area Connection: Connection-specific DNS Suffix . : amer.example.com Description . . . . . . . . . . . : Intel(R) 82567LM Gigabit Network Connection Physical Address. . . . . . . . . : YY-XY-BY-DY-XB-YX Dhcp Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes IP Address. . . . . . . . . . . . : XYY.XXX.XY.XY Subnet Mask . . . . . . . . . . . : XXX.XXX.XXY.Y Default Gateway . . . . . . . . . : XYY.XXX.XY.X DHCP Server . . . . . . . . . . . : XY.XXX.XXY.XX DNS Servers . . . . . . . . . . . : XY.XXX.XXY.XX XY.XXY.XXY.XX Primary WINS Server . . . . . . . : XY.XXX.XXY.X Secondary WINS Server . . . . . . : XY.XXY.XXY.X Lease Obtained. . . . . . . . . . : Thursday, July XX, XYXX XX:XX:XX AM Lease Expires . . . . . . . . . . : Sunday, July XX, XYXX XX:XX:XX AM Ethernet adapter {XYXAAYXX-YEDY-XXYX-YYEX-BYXYXXYEEYEX}: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Nortel IPSECSHM Adapter - Packet Scheduler iniport Physical Address. . . . . . . . . : XX-XX-XX-XX-XX-YY Dhcp Enabled. . . . . . . . . . . : No IP Address. . . . . . . . . . . . : Y.Y.Y.Y Subnet Mask . . . . . . . . . . . : Y.Y.Y.Y Default Gateway . . . . . . . . . : Ethernet adapter Leaf Networks Adapter: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Leaf Networks Adapter Physical Address. . . . . . . . . : YY-FF-FA-BC-YF-AY Dhcp Enabled. . . . . . . . . . . : No IP Address. . . . . . . . . . . . : X.XYY.XY.XX Subnet Mask . . . . . . . . . . . : XXX.Y.Y.Y Default Gateway . . . . . . . . . : Ethernet adapter Local Area Connection 3: Media State . . . . . . . . . . . : Media disconnected Description . . . . . . . . . . . : Bluetooth LAN Access Server Driver Physical Address. . . . . . . . . : YY-FX-AX-YA-BY-CA Ethernet adapter Wireless Network Connection 2: Media State . . . . . . . . . . . : Media disconnected Description . . . . . . . . . . . : Intel(R) WiFi Link 5300 AGN Physical Address. . . . . . . . . : YY-XX-YA-CX-FC-YE Ethernet adapter Local Area Connection 2: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : ASIX ax88772 USB2.0 to Fast Ethernet Adapter Physical Address. . . . . . . . . : YY-XY-BY-YX-XY-AY Dhcp Enabled. . . . . . . . . . . : No IP Address. . . . . . . . . . . . : XYX.XYY.X.X Subnet Mask . . . . . . . . . . . : XXX.XXX.XXX.Y Default Gateway . . . . . . . . . :

Read the article

Apache Tomcat Ant undeploy task error using

- by Devil Jin

I am using ant 1.7 to deploy and undeploy applications in tomcat //Snippet from my build.xml <target name="deploy" depends="war" description="Install application to the servlet containor"> <deploy url="${tomcat.manager.url}" username="${manager.user}" password="${manager.passwd}" path="/${tomcat.ctxpath}" war="${war.local}" /> </target> <target name="undeploy" description="Removes Web Application from path"> <undeploy url="${tomcat.manager.url}" username="${manager.user}" password="${manager.passwd}" path="/${tomcat.ctxpath}" /> </target> The deploy task works perfectly fine but the undeploy task gives an html output for the undeploy task prefixed with [undeploy] although the application is undeployed successfully The html message also contains the success message 'OK - Undeployed application at context path /MyApplication' OUTPUT: [undeploy] <html> [undeploy] <head> [undeploy] <style> [undeploy] H1 {font-family:Tahoma,Arial,sans-serif;color:white;background-color:#525D76;font-size:22px;} H2 {font-family:Tah oma,Arial,sans-serif;color:white;background-color:#525D76;font-size:16px;} H3 {font-family:Tahoma,Arial,sans-serif;color:whit e;background-color:#525D76;font-size:14px;} BODY {font-family:Tahoma,Arial,sans-serif;color:black;background-color:white;} B {font-family:Tahoma,Arial,sans-serif;color:white;background-color:#525D76;} P {font-family:Tahoma,Arial,sans-serif;background :white;color:black;font-size:12px;}A {color : black;}A.name {color : black;}HR {color : #525D76;} table { [undeploy] width: 100%; [undeploy] } [undeploy] td.page-title { [undeploy] text-align: center; [undeploy] vertical-align: top; [undeploy] font-family:sans-serif,Tahoma,Arial; [undeploy] font-weight: bold; [undeploy] background: white; [undeploy] color: black; [undeploy] } [undeploy] td.title { [undeploy] text-align: left; [undeploy] vertical-align: top; [undeploy] font-family:sans-serif,Tahoma,Arial; [undeploy] font-style:italic; [undeploy] font-weight: bold; [undeploy] background: #D2A41C; [undeploy] } [undeploy] td.header-left { [undeploy] text-align: left; [undeploy] vertical-align: top; [undeploy] font-family:sans-serif,Tahoma,Arial; [undeploy] font-weight: bold; [undeploy] background: #FFDC75; [undeploy] } [undeploy] td.header-center { [undeploy] text-align: center; [undeploy] vertical-align: top; [undeploy] font-family:sans-serif,Tahoma,Arial; [undeploy] font-weight: bold; [undeploy] background: #FFDC75; [undeploy] } [undeploy] td.row-left { [undeploy] text-align: left; [undeploy] vertical-align: middle; [undeploy] font-family:sans-serif,Tahoma,Arial; [undeploy] color: black; [undeploy] } [undeploy] td.row-center { [undeploy] text-align: center; [undeploy] vertical-align: middle; [undeploy] font-family:sans-serif,Tahoma,Arial; [undeploy] color: black; [undeploy] } [undeploy] td.row-right { [undeploy] text-align: right; [undeploy] vertical-align: middle; [undeploy] font-family:sans-serif,Tahoma,Arial; [undeploy] color: black; [undeploy] } [undeploy] TH { [undeploy] text-align: center; [undeploy] vertical-align: top; [undeploy] font-family:sans-serif,Tahoma,Arial; [undeploy] font-weight: bold; [undeploy] background: #FFDC75; [undeploy] } [undeploy] TD { [undeploy] text-align: center; [undeploy] vertical-align: middle; [undeploy] font-family:sans-serif,Tahoma,Arial; [undeploy] color: black; [undeploy] } [undeploy] </style> [undeploy] <title>/manager</title> [undeploy] </head> [undeploy] <body bgcolor="#FFFFFF"> [undeploy] <table cellspacing="4" width="100%" border="0"> [undeploy] <tr> [undeploy] <td colspan="2"> [undeploy] <a href="http://www.apache.org/"> [undeploy] <img border="0" alt="The Apache Software Foundation" align="left" [undeploy] src="/manager/images/asf-logo.gif"> [undeploy] </a> [undeploy] <a href="http://tomcat.apache.org/"> [undeploy] <img border="0" alt="The Tomcat Servlet/JSP Container" [undeploy] align="right" src="/manager/images/tomcat.gif"> [undeploy] </a> [undeploy] </td> [undeploy] </tr> [undeploy] </table> [undeploy] <hr size="1" noshade="noshade"> [undeploy] <table cellspacing="4" width="100%" border="0"> [undeploy] <tr> [undeploy] <td class="page-title" bordercolor="#000000" align="left" nowrap> [undeploy] <font size="+2">Tomcat Web Application Manager</font> [undeploy] </td> [undeploy] </tr> [undeploy] </table> [undeploy] <br> [undeploy] <table border="1" cellspacing="0" cellpadding="3"> [undeploy] <tr> [undeploy] <td class="row-left" width="10%"><small><strong>Message:</strong></small> </td> [undeploy] <td class="row-left"><pre>OK - Undeployed application at context path /MyApplication [undeploy] </pre></td> [undeploy] </tr> [undeploy] </table> [undeploy] <br> [undeploy] <table border="1" cellspacing="0" cellpadding="3"> [undeploy] <tr> [undeploy] <td colspan="4" class="title">Manager</td> [undeploy] </tr> [undeploy] <tr> [undeploy] <td class="row-left"><a href="/manager/html/list">List Applications</a></td> [undeploy] <td class="row-center"><a href="/manager/../docs/html-manager-howto.html">HTML Manager Help</a></td> [undeploy] <td class="row-center"><a href="/manager/../docs/manager-howto.html">Manager Help</a></td> [undeploy] <td class="row-right"><a href="/manager/status">Server Status</a></td> [undeploy] </tr> [undeploy] </table> [undeploy] <br> [undeploy] <table border="1" cellspacing="0" cellpadding="3"> [undeploy] <tr> [undeploy] <td colspan="5" class="title">Applications</td> [undeploy] </tr> [undeploy] <tr> [undeploy] <td class="header-left"><small>Path</small></td> [undeploy] <td class="header-left"><small>Display Name</small></td> [undeploy] <td class="header-center"><small>Running</small></td> [undeploy] <td class="header-center"><small>Sessions</small></td> [undeploy] <td class="header-left"><small>Commands</small></td> [undeploy] </tr> [undeploy] <tr> [undeploy] <td class="row-left" bgcolor="#FFFFFF" rowspan="2"><small><a href="/">/</a></small></td> [undeploy] <td class="row-left" bgcolor="#FFFFFF" rowspan="2"><small>Welcome to Tomcat</small></td> [undeploy] <td class="row-center" bgcolor="#FFFFFF" rowspan="2"><small>true</small></td> [undeploy] <td class="row-center" bgcolor="#FFFFFF" rowspan="2"><small><a href="/manager/html/sessions?path=/" target="_bla nk">0</a></small></td> [undeploy] <td class="row-left" bgcolor="#FFFFFF"> [undeploy] <small> [undeploy]  Start  [undeploy]  <a href="/manager/html/stop?path=/" onclick="return(confirm('Are you sure?'))">Stop</a>  [undeploy]  <a href="/manager/html/reload?path=/" onclick="return(confirm('Are you sure?'))">Reload</a>  [undeploy]  <a href="/manager/html/undeploy?path=/" onclick="return(confirm('Are you sure?'))">Undeploy</a>  [undeploy] </small> [undeploy] </td> [undeploy] </tr><tr> [undeploy] <td class="row-left" bgcolor="#FFFFFF"> [undeploy] <form method="POST" action="/manager/html/expire?path=/"> [undeploy] <small> [undeploy]  <input type="submit" value="Expire sessions"> with idle ≥ <input type="text" name="idle" siz e="5" value="30"> minutes  [undeploy] </small> [undeploy] </form> [undeploy] </td> [undeploy] </tr> [undeploy] <tr> [undeploy] <td class="row-left" bgcolor="#C3F3C3" rowspan="2"><small><a href="/docs">/docs</a></small></td> [undeploy] <td class="row-left" bgcolor="#C3F3C3" rowspan="2"><small>Tomcat Documentation</small></td> [undeploy] <td class="row-center" bgcolor="#C3F3C3" rowspan="2"><small>true</small></td> [undeploy] <td class="row-center" bgcolor="#C3F3C3" rowspan="2"><small><a href="/manager/html/sessions?path=/docs" target=" _blank">0</a></small></td> [undeploy] <td class="row-left" bgcolor="#C3F3C3"> [undeploy] <small> [undeploy]  Start  [undeploy]  <a href="/manager/html/stop?path=/docs" onclick="return(confirm('Are you sure?'))">Stop</a>  [undeploy]  <a href="/manager/html/reload?path=/docs" onclick="return(confirm('Are you sure?'))">Reload</a>  [undeploy]  <a href="/manager/html/undeploy?path=/docs" onclick="return(confirm('Are you sure?'))">Undeploy</a>  [undeploy] </small> [undeploy] </td> [undeploy] </tr><tr> [undeploy] <td class="row-left" bgcolor="#C3F3C3"> [undeploy] <form method="POST" action="/manager/html/expire?path=/docs"> [undeploy] <small> [undeploy]  <input type="submit" value="Expire sessions"> with idle ≥ <input type="text" name="idle" siz e="5" value="30"> minutes  [undeploy] </small> [undeploy] </form> [undeploy] </td> [undeploy] </tr> [undeploy] <tr> [undeploy] <td class="row-left" bgcolor="#FFFFFF" rowspan="2"><small><a href="/examples">/examples</a></small></td> [undeploy] <td class="row-left" bgcolor="#FFFFFF" rowspan="2"><small>Servlet and JSP Examples</small></td> [undeploy] <td class="row-center" bgcolor="#FFFFFF" rowspan="2"><small>true</small></td> [undeploy] <td class="row-center" bgcolor="#FFFFFF" rowspan="2"><small><a href="/manager/html/sessions?path=/examples" targ et="_blank">0</a></small></td> [undeploy] <td class="row-left" bgcolor="#FFFFFF"> [undeploy] <small> [undeploy]  Start  [undeploy]  <a href="/manager/html/stop?path=/examples" onclick="return(confirm('Are you sure?'))">Stop</a>  [undeploy]  <a href="/manager/html/reload?path=/examples" onclick="return(confirm('Are you sure?'))">Reload</a>  [undeploy]  <a href="/manager/html/undeploy?path=/examples" onclick="return(confirm('Are you sure?'))">Undeploy</a>&n bsp; [undeploy] </small> [undeploy] </td> [undeploy] </tr><tr> [undeploy] <td class="row-left" bgcolor="#FFFFFF"> [undeploy] <form method="POST" action="/manager/html/expire?path=/examples"> [undeploy] <small> [undeploy]  <input type="submit" value="Expire sessions"> with idle ≥ <input type="text" name="idle" siz e="5" value="30"> minutes  [undeploy] </small> [undeploy] </form> [undeploy] </td> [undeploy] </tr> [undeploy] <tr> [undeploy] <td class="row-left" bgcolor="#C3F3C3" rowspan="2"><small><a href="/host%2Dmanager">/host-manager</a></small></t d> [undeploy] <td class="row-left" bgcolor="#C3F3C3" rowspan="2"><small>Tomcat Manager Application</small></td> [undeploy] <td class="row-center" bgcolor="#C3F3C3" rowspan="2"><small>true</small></td> [undeploy] <td class="row-center" bgcolor="#C3F3C3" rowspan="2"><small><a href="/manager/html/sessions?path=/host%2Dmanager " target="_blank">0</a></small></td> [undeploy] <td class="row-left" bgcolor="#C3F3C3"> [undeploy] <small> [undeploy]  Start  [undeploy]  <a href="/manager/html/stop?path=/host%2Dmanager" onclick="return(confirm('Are you sure?'))">Stop</a>&nbs p; [undeploy]  <a href="/manager/html/reload?path=/host%2Dmanager" onclick="return(confirm('Are you sure?'))">Reload</a>   [undeploy]  <a href="/manager/html/undeploy?path=/host%2Dmanager" onclick="return(confirm('Are you sure?'))">Undeploy </a>  [undeploy] </small> [undeploy] </td> [undeploy] </tr><tr> [undeploy] <td class="row-left" bgcolor="#C3F3C3"> [undeploy] <form method="POST" action="/manager/html/expire?path=/host%2Dmanager"> [undeploy] <small> [undeploy]  <input type="submit" value="Expire sessions"> with idle ≥ <input type="text" name="idle" siz e="5" value="30"> minutes  [undeploy] </small> [undeploy] </form> [undeploy] </td> [undeploy] </tr> [undeploy] <tr> [undeploy] <td class="row-left" bgcolor="#FFFFFF" rowspan="2"><small><a href="/manager">/manager</a></small></td> [undeploy] <td class="row-left" bgcolor="#FFFFFF" rowspan="2"><small>Tomcat Manager Application</small></td> [undeploy] <td class="row-center" bgcolor="#FFFFFF" rowspan="2"><small>true</small></td> [undeploy] <td class="row-center" bgcolor="#FFFFFF" rowspan="2"><small><a href="/manager/html/sessions?path=/manager" targe t="_blank">3</a></small></td> [undeploy] <td class="row-left" bgcolor="#FFFFFF"> [undeploy] <small> [undeploy]  Start  [undeploy]  Stop  [undeploy]  Reload  [undeploy]  Undeploy  [undeploy] </small> [undeploy] </td> [undeploy] </tr><tr> [undeploy] <td class="row-left" bgcolor="#FFFFFF"> [undeploy] <form method="POST" action="/manager/html/expire?path=/manager"> [undeploy] <small> [undeploy]  <input type="submit" value="Expire sessions"> with idle ≥ <input type="text" name="idle" siz e="5" value="30"> minutes  [undeploy] </small> [undeploy] </form> [undeploy] </td> [undeploy] </tr> [undeploy] </table> [undeploy] <br> [undeploy] <table border="1" cellspacing="0" cellpadding="3"> [undeploy] <tr> [undeploy] <td colspan="2" class="title">Deploy</td> [undeploy] </tr> [undeploy] <tr> [undeploy] <td colspan="2" class="header-left"><small>Deploy directory or WAR file located on server</small></td> [undeploy] </tr> [undeploy] <tr> [undeploy] <td colspan="2"> [undeploy] <form method="get" action="/manager/html/deploy"> [undeploy] <table cellspacing="0" cellpadding="3"> [undeploy] <tr> [undeploy] <td class="row-right"> [undeploy] <small>Context Path (required):</small> [undeploy] </td> [undeploy] <td class="row-left"> [undeploy] <input type="text" name="deployPath" size="20"> [undeploy] </td> [undeploy] </tr> [undeploy] <tr> [undeploy] <td class="row-right"> [undeploy] <small>XML Configuration file URL:</small> [undeploy] </td> [undeploy] <td class="row-left"> [undeploy] <input type="text" name="deployConfig" size="20"> [undeploy] </td> [undeploy] </tr> [undeploy] <tr> [undeploy] <td class="row-right"> [undeploy] <small>WAR or Directory URL:</small> [undeploy] </td> [undeploy] <td class="row-left"> [undeploy] <input type="text" name="deployWar" size="40"> [undeploy] </td> [undeploy] </tr> [undeploy] <tr> [undeploy] <td class="row-right"> [undeploy]   [undeploy] </td> [undeploy] <td class="row-left"> [undeploy] <input type="submit" value="Deploy"> [undeploy] </td> [undeploy] </tr> [undeploy] </table> [undeploy] </form> [undeploy] </td> [undeploy] </tr> [undeploy] <tr> [undeploy] <td colspan="2" class="header-left"><small>WAR file to deploy</small></td> [undeploy] </tr> [undeploy] <tr> [undeploy] <td colspan="2"> [undeploy] <form action="/manager/html/upload" method="post" enctype="multipart/form-data"> [undeploy] <table cellspacing="0" cellpadding="3"> [undeploy] <tr> [undeploy] <td class="row-right"> [undeploy] <small>Select WAR file to upload</small> [undeploy] </td> [undeploy] <td class="row-left"> [undeploy] <input type="file" name="deployWar" size="40"> [undeploy] </td> [undeploy] </tr> [undeploy] <tr> [undeploy] <td class="row-right"> [undeploy]   [undeploy] </td> [undeploy] <td class="row-left"> [undeploy] <input type="submit" value="Deploy"> [undeploy] </td> [undeploy] </tr> [undeploy] </table> [undeploy] </form> [undeploy] </table> [undeploy] <br> [undeploy] <table border="1" cellspacing="0" cellpadding="3"> [undeploy] <tr> [undeploy] <td colspan="2" class="title">Diagnostics</td> [undeploy] </tr> [undeploy] <tr> [undeploy] <td colspan="2" class="header-left"><small>Check to see if a web application has caused a memory leak on stop, r eload or undeploy</small></td> [undeploy] </tr> [undeploy] <tr> [undeploy] <td colspan="2"> [undeploy] <form method="post" action="/manager/html/findleaks"> [undeploy] <table cellspacing="0" cellpadding="3"> [undeploy] <tr> [undeploy] <td class="row-left"> [undeploy] <input type="submit" value="Find leaks"> [undeploy] </td> [undeploy] <td class="row-left"> [undeploy] <small>This diagnostic check will trigger a full garbage collection. Use it with extreme caution on production systems.</small> [undeploy] </td> [undeploy] </tr> [undeploy] </table> [undeploy] </form> [undeploy] </td> [undeploy] </tr> [undeploy] </table> [undeploy] <br><table border="1" cellspacing="0" cellpadding="3"> [undeploy] <tr> [undeploy] <td colspan="6" class="title">Server Information</td> [undeploy] </tr> [undeploy] <tr> [undeploy] <td class="header-center"><small>Tomcat Version</small></td> [undeploy] <td class="header-center"><small>JVM Version</small></td> [undeploy] <td class="header-center"><small>JVM Vendor</small></td> [undeploy] <td class="header-center"><small>OS Name</small></td> [undeploy] <td class="header-center"><small>OS Version</small></td> [undeploy] <td class="header-center"><small>OS Architecture</small></td> [undeploy] </tr> [undeploy] <tr> [undeploy] <td class="row-center"><small>Apache Tomcat/6.0.26</small></td> [undeploy] <td class="row-center"><small>1.5.0_09-b01</small></td> [undeploy] <td class="row-center"><small>Sun Microsystems Inc.</small></td> [undeploy] <td class="row-center"><small>Windows XP</small></td> [undeploy] <td class="row-center"><small>5.1</small></td> [undeploy] <td class="row-center"><small>x86</small></td> [undeploy] </tr> [undeploy] </table> [undeploy] <br> [undeploy] <hr size="1" noshade="noshade"> [undeploy] <center><font size="-1" color="#525D76"> [undeploy] <em>Copyright © 1999-2010, Apache Software Foundation</em></font></center> [undeploy] </body> [undeploy] </html>

Read the article

ant undeploy task error

- by Devil Jin

I am using ant 1.7 to deploy and undeploy applications in tomcat //Snippet from my build.xml <target name="deploy" depends="war" description="Install application to the servlet containor"> <deploy url="${tomcat.manager.url}" username="${manager.user}" password="${manager.passwd}" path="/${tomcat.ctxpath}" war="${war.local}" /> </target> <target name="undeploy" description="Removes Web Application from path"> <undeploy url="${tomcat.manager.url}" username="${manager.user}" password="${manager.passwd}" path="/${tomcat.ctxpath}" /> </target> The deploy task works perfectly fine but the undeploy task gives an html output for the undeploy task prefixed with [undeploy] although the application is undeployed successfully The html message also contains the success message 'OK - Undeployed application at context path /MyApplication' OUTPUT: [undeploy] <html> [undeploy] <head> [undeploy] <style> [undeploy] H1 {font-family:Tahoma,Arial,sans-serif;color:white;background-color:#525D76;font-size:22px;} H2 {font-family:Tah oma,Arial,sans-serif;color:white;background-color:#525D76;font-size:16px;} H3 {font-family:Tahoma,Arial,sans-serif;color:whit e;background-color:#525D76;font-size:14px;} BODY {font-family:Tahoma,Arial,sans-serif;color:black;background-color:white;} B {font-family:Tahoma,Arial,sans-serif;color:white;background-color:#525D76;} P {font-family:Tahoma,Arial,sans-serif;background :white;color:black;font-size:12px;}A {color : black;}A.name {color : black;}HR {color : #525D76;} table { [undeploy] width: 100%; [undeploy] } [undeploy] td.page-title { [undeploy] text-align: center; [undeploy] vertical-align: top; [undeploy] font-family:sans-serif,Tahoma,Arial; [undeploy] font-weight: bold; [undeploy] background: white; [undeploy] color: black; [undeploy] } [undeploy] td.title { [undeploy] text-align: left; [undeploy] vertical-align: top; [undeploy] font-family:sans-serif,Tahoma,Arial; [undeploy] font-style:italic; [undeploy] font-weight: bold; [undeploy] background: #D2A41C; [undeploy] } [undeploy] td.header-left { [undeploy] text-align: left; [undeploy] vertical-align: top; [undeploy] font-family:sans-serif,Tahoma,Arial; [undeploy] font-weight: bold; [undeploy] background: #FFDC75; [undeploy] } [undeploy] td.header-center { [undeploy] text-align: center; [undeploy] vertical-align: top; [undeploy] font-family:sans-serif,Tahoma,Arial; [undeploy] font-weight: bold; [undeploy] background: #FFDC75; [undeploy] } [undeploy] td.row-left { [undeploy] text-align: left; [undeploy] vertical-align: middle; [undeploy] font-family:sans-serif,Tahoma,Arial; [undeploy] color: black; [undeploy] } [undeploy] td.row-center { [undeploy] text-align: center; [undeploy] vertical-align: middle; [undeploy] font-family:sans-serif,Tahoma,Arial; [undeploy] color: black; [undeploy] } [undeploy] td.row-right { [undeploy] text-align: right; [undeploy] vertical-align: middle; [undeploy] font-family:sans-serif,Tahoma,Arial; [undeploy] color: black; [undeploy] } [undeploy] TH { [undeploy] text-align: center; [undeploy] vertical-align: top; [undeploy] font-family:sans-serif,Tahoma,Arial; [undeploy] font-weight: bold; [undeploy] background: #FFDC75; [undeploy] } [undeploy] TD { [undeploy] text-align: center; [undeploy] vertical-align: middle; [undeploy] font-family:sans-serif,Tahoma,Arial; [undeploy] color: black; [undeploy] } [undeploy] </style> [undeploy] <title>/manager</title> [undeploy] </head> [undeploy] <body bgcolor="#FFFFFF"> [undeploy] <table cellspacing="4" width="100%" border="0"> [undeploy] <tr> [undeploy] <td colspan="2"> [undeploy] <a href="http://www.apache.org/"> [undeploy] <img border="0" alt="The Apache Software Foundation" align="left" [undeploy] src="/manager/images/asf-logo.gif"> [undeploy] </a> [undeploy] <a href="http://tomcat.apache.org/"> [undeploy] <img border="0" alt="The Tomcat Servlet/JSP Container" [undeploy] align="right" src="/manager/images/tomcat.gif"> [undeploy] </a> [undeploy] </td> [undeploy] </tr> [undeploy] </table> [undeploy] <hr size="1" noshade="noshade"> [undeploy] <table cellspacing="4" width="100%" border="0"> [undeploy] <tr> [undeploy] <td class="page-title" bordercolor="#000000" align="left" nowrap> [undeploy] <font size="+2">Tomcat Web Application Manager</font> [undeploy] </td> [undeploy] </tr> [undeploy] </table> [undeploy] <br> [undeploy] <table border="1" cellspacing="0" cellpadding="3"> [undeploy] <tr> [undeploy] <td class="row-left" width="10%"><small><strong>Message:</strong></small> </td> [undeploy] <td class="row-left"><pre>OK - Undeployed application at context path /MyApplication [undeploy] </pre></td> [undeploy] </tr> [undeploy] </table> [undeploy] <br> [undeploy] <table border="1" cellspacing="0" cellpadding="3"> [undeploy] <tr> [undeploy] <td colspan="4" class="title">Manager</td> [undeploy] </tr> [undeploy] <tr> [undeploy] <td class="row-left"><a href="/manager/html/list">List Applications</a></td> [undeploy] <td class="row-center"><a href="/manager/../docs/html-manager-howto.html">HTML Manager Help</a></td> [undeploy] <td class="row-center"><a href="/manager/../docs/manager-howto.html">Manager Help</a></td> [undeploy] <td class="row-right"><a href="/manager/status">Server Status</a></td> [undeploy] </tr> [undeploy] </table> [undeploy] <br> [undeploy] <table border="1" cellspacing="0" cellpadding="3"> [undeploy] <tr> [undeploy] <td colspan="5" class="title">Applications</td> [undeploy] </tr> [undeploy] <tr> [undeploy] <td class="header-left"><small>Path</small></td> [undeploy] <td class="header-left"><small>Display Name</small></td> [undeploy] <td class="header-center"><small>Running</small></td> [undeploy] <td class="header-center"><small>Sessions</small></td> [undeploy] <td class="header-left"><small>Commands</small></td> [undeploy] </tr> [undeploy] <tr> [undeploy] <td class="row-left" bgcolor="#FFFFFF" rowspan="2"><small><a href="/">/</a></small></td> [undeploy] <td class="row-left" bgcolor="#FFFFFF" rowspan="2"><small>Welcome to Tomcat</small></td> [undeploy] <td class="row-center" bgcolor="#FFFFFF" rowspan="2"><small>true</small></td> [undeploy] <td class="row-center" bgcolor="#FFFFFF" rowspan="2"><small><a href="/manager/html/sessions?path=/" target="_bla nk">0</a></small></td> [undeploy] <td class="row-left" bgcolor="#FFFFFF"> [undeploy] <small> [undeploy]  Start  [undeploy]  <a href="/manager/html/stop?path=/" onclick="return(confirm('Are you sure?'))">Stop</a>  [undeploy]  <a href="/manager/html/reload?path=/" onclick="return(confirm('Are you sure?'))">Reload</a>  [undeploy]  <a href="/manager/html/undeploy?path=/" onclick="return(confirm('Are you sure?'))">Undeploy</a>  [undeploy] </small> [undeploy] </td> [undeploy] </tr><tr> [undeploy] <td class="row-left" bgcolor="#FFFFFF"> [undeploy] <form method="POST" action="/manager/html/expire?path=/"> [undeploy] <small> [undeploy]  <input type="submit" value="Expire sessions"> with idle ≥ <input type="text" name="idle" siz e="5" value="30"> minutes  [undeploy] </small> [undeploy] </form> [undeploy] </td> [undeploy] </tr> [undeploy] <tr> [undeploy] <td class="row-left" bgcolor="#C3F3C3" rowspan="2"><small><a href="/docs">/docs</a></small></td> [undeploy] <td class="row-left" bgcolor="#C3F3C3" rowspan="2"><small>Tomcat Documentation</small></td> [undeploy] <td class="row-center" bgcolor="#C3F3C3" rowspan="2"><small>true</small></td> [undeploy] <td class="row-center" bgcolor="#C3F3C3" rowspan="2"><small><a href="/manager/html/sessions?path=/docs" target=" _blank">0</a></small></td> [undeploy] <td class="row-left" bgcolor="#C3F3C3"> [undeploy] <small> [undeploy]  Start  [undeploy]  <a href="/manager/html/stop?path=/docs" onclick="return(confirm('Are you sure?'))">Stop</a>  [undeploy]  <a href="/manager/html/reload?path=/docs" onclick="return(confirm('Are you sure?'))">Reload</a>  [undeploy]  <a href="/manager/html/undeploy?path=/docs" onclick="return(confirm('Are you sure?'))">Undeploy</a>  [undeploy] </small> [undeploy] </td> [undeploy] </tr><tr> [undeploy] <td class="row-left" bgcolor="#C3F3C3"> [undeploy] <form method="POST" action="/manager/html/expire?path=/docs"> [undeploy] <small> [undeploy]  <input type="submit" value="Expire sessions"> with idle ≥ <input type="text" name="idle" siz e="5" value="30"> minutes  [undeploy] </small> [undeploy] </form> [undeploy] </td> [undeploy] </tr> [undeploy] <tr> [undeploy] <td class="row-left" bgcolor="#FFFFFF" rowspan="2"><small><a href="/examples">/examples</a></small></td> [undeploy] <td class="row-left" bgcolor="#FFFFFF" rowspan="2"><small>Servlet and JSP Examples</small></td> [undeploy] <td class="row-center" bgcolor="#FFFFFF" rowspan="2"><small>true</small></td> [undeploy] <td class="row-center" bgcolor="#FFFFFF" rowspan="2"><small><a href="/manager/html/sessions?path=/examples" targ et="_blank">0</a></small></td> [undeploy] <td class="row-left" bgcolor="#FFFFFF"> [undeploy] <small> [undeploy]  Start  [undeploy]  <a href="/manager/html/stop?path=/examples" onclick="return(confirm('Are you sure?'))">Stop</a>  [undeploy]  <a href="/manager/html/reload?path=/examples" onclick="return(confirm('Are you sure?'))">Reload</a>  [undeploy]  <a href="/manager/html/undeploy?path=/examples" onclick="return(confirm('Are you sure?'))">Undeploy</a>&n bsp; [undeploy] </small> [undeploy] </td> [undeploy] </tr><tr> [undeploy] <td class="row-left" bgcolor="#FFFFFF"> [undeploy] <form method="POST" action="/manager/html/expire?path=/examples"> [undeploy] <small> [undeploy]  <input type="submit" value="Expire sessions"> with idle ≥ <input type="text" name="idle" siz e="5" value="30"> minutes  [undeploy] </small> [undeploy] </form> [undeploy] </td> [undeploy] </tr> [undeploy] <tr> [undeploy] <td class="row-left" bgcolor="#C3F3C3" rowspan="2"><small><a href="/host%2Dmanager">/host-manager</a></small></t d> [undeploy] <td class="row-left" bgcolor="#C3F3C3" rowspan="2"><small>Tomcat Manager Application</small></td> [undeploy] <td class="row-center" bgcolor="#C3F3C3" rowspan="2"><small>true</small></td> [undeploy] <td class="row-center" bgcolor="#C3F3C3" rowspan="2"><small><a href="/manager/html/sessions?path=/host%2Dmanager " target="_blank">0</a></small></td> [undeploy] <td class="row-left" bgcolor="#C3F3C3"> [undeploy] <small> [undeploy]  Start  [undeploy]  <a href="/manager/html/stop?path=/host%2Dmanager" onclick="return(confirm('Are you sure?'))">Stop</a>&nbs p; [undeploy]  <a href="/manager/html/reload?path=/host%2Dmanager" onclick="return(confirm('Are you sure?'))">Reload</a>   [undeploy]  <a href="/manager/html/undeploy?path=/host%2Dmanager" onclick="return(confirm('Are you sure?'))">Undeploy </a>  [undeploy] </small> [undeploy] </td> [undeploy] </tr><tr> [undeploy] <td class="row-left" bgcolor="#C3F3C3"> [undeploy] <form method="POST" action="/manager/html/expire?path=/host%2Dmanager"> [undeploy] <small> [undeploy]  <input type="submit" value="Expire sessions"> with idle ≥ <input type="text" name="idle" siz e="5" value="30"> minutes  [undeploy] </small> [undeploy] </form> [undeploy] </td> [undeploy] </tr> [undeploy] <tr> [undeploy] <td class="row-left" bgcolor="#FFFFFF" rowspan="2"><small><a href="/manager">/manager</a></small></td> [undeploy] <td class="row-left" bgcolor="#FFFFFF" rowspan="2"><small>Tomcat Manager Application</small></td> [undeploy] <td class="row-center" bgcolor="#FFFFFF" rowspan="2"><small>true</small></td> [undeploy] <td class="row-center" bgcolor="#FFFFFF" rowspan="2"><small><a href="/manager/html/sessions?path=/manager" targe t="_blank">3</a></small></td> [undeploy] <td class="row-left" bgcolor="#FFFFFF"> [undeploy] <small> [undeploy]  Start  [undeploy]  Stop  [undeploy]  Reload  [undeploy]  Undeploy  [undeploy] </small> [undeploy] </td> [undeploy] </tr><tr> [undeploy] <td class="row-left" bgcolor="#FFFFFF"> [undeploy] <form method="POST" action="/manager/html/expire?path=/manager"> [undeploy] <small> [undeploy]  <input type="submit" value="Expire sessions"> with idle ≥ <input type="text" name="idle" siz e="5" value="30"> minutes  [undeploy] </small> [undeploy] </form> [undeploy] </td> [undeploy] </tr> [undeploy] </table> [undeploy] <br> [undeploy] <table border="1" cellspacing="0" cellpadding="3"> [undeploy] <tr> [undeploy] <td colspan="2" class="title">Deploy</td> [undeploy] </tr> [undeploy] <tr> [undeploy] <td colspan="2" class="header-left"><small>Deploy directory or WAR file located on server</small></td> [undeploy] </tr> [undeploy] <tr> [undeploy] <td colspan="2"> [undeploy] <form method="get" action="/manager/html/deploy"> [undeploy] <table cellspacing="0" cellpadding="3"> [undeploy] <tr> [undeploy] <td class="row-right"> [undeploy] <small>Context Path (required):</small> [undeploy] </td> [undeploy] <td class="row-left"> [undeploy] <input type="text" name="deployPath" size="20"> [undeploy] </td> [undeploy] </tr> [undeploy] <tr> [undeploy] <td class="row-right"> [undeploy] <small>XML Configuration file URL:</small> [undeploy] </td> [undeploy] <td class="row-left"> [undeploy] <input type="text" name="deployConfig" size="20"> [undeploy] </td> [undeploy] </tr> [undeploy] <tr> [undeploy] <td class="row-right"> [undeploy] <small>WAR or Directory URL:</small> [undeploy] </td> [undeploy] <td class="row-left"> [undeploy] <input type="text" name="deployWar" size="40"> [undeploy] </td> [undeploy] </tr> [undeploy] <tr> [undeploy] <td class="row-right"> [undeploy]   [undeploy] </td> [undeploy] <td class="row-left"> [undeploy] <input type="submit" value="Deploy"> [undeploy] </td> [undeploy] </tr> [undeploy] </table> [undeploy] </form> [undeploy] </td> [undeploy] </tr> [undeploy] <tr> [undeploy] <td colspan="2" class="header-left"><small>WAR file to deploy</small></td> [undeploy] </tr> [undeploy] <tr> [undeploy] <td colspan="2"> [undeploy] <form action="/manager/html/upload" method="post" enctype="multipart/form-data"> [undeploy] <table cellspacing="0" cellpadding="3"> [undeploy] <tr> [undeploy] <td class="row-right"> [undeploy] <small>Select WAR file to upload</small> [undeploy] </td> [undeploy] <td class="row-left"> [undeploy] <input type="file" name="deployWar" size="40"> [undeploy] </td> [undeploy] </tr> [undeploy] <tr> [undeploy] <td class="row-right"> [undeploy]   [undeploy] </td> [undeploy] <td class="row-left"> [undeploy] <input type="submit" value="Deploy"> [undeploy] </td> [undeploy] </tr> [undeploy] </table> [undeploy] </form> [undeploy] </table> [undeploy] <br> [undeploy] <table border="1" cellspacing="0" cellpadding="3"> [undeploy] <tr> [undeploy] <td colspan="2" class="title">Diagnostics</td> [undeploy] </tr> [undeploy] <tr> [undeploy] <td colspan="2" class="header-left"><small>Check to see if a web application has caused a memory leak on stop, r eload or undeploy</small></td> [undeploy] </tr> [undeploy] <tr> [undeploy] <td colspan="2"> [undeploy] <form method="post" action="/manager/html/findleaks"> [undeploy] <table cellspacing="0" cellpadding="3"> [undeploy] <tr> [undeploy] <td class="row-left"> [undeploy] <input type="submit" value="Find leaks"> [undeploy] </td> [undeploy] <td class="row-left"> [undeploy] <small>This diagnostic check will trigger a full garbage collection. Use it with extreme caution on production systems.</small> [undeploy] </td> [undeploy] </tr> [undeploy] </table> [undeploy] </form> [undeploy] </td> [undeploy] </tr> [undeploy] </table> [undeploy] <br><table border="1" cellspacing="0" cellpadding="3"> [undeploy] <tr> [undeploy] <td colspan="6" class="title">Server Information</td> [undeploy] </tr> [undeploy] <tr> [undeploy] <td class="header-center"><small>Tomcat Version</small></td> [undeploy] <td class="header-center"><small>JVM Version</small></td> [undeploy] <td class="header-center"><small>JVM Vendor</small></td> [undeploy] <td class="header-center"><small>OS Name</small></td> [undeploy] <td class="header-center"><small>OS Version</small></td> [undeploy] <td class="header-center"><small>OS Architecture</small></td> [undeploy] </tr> [undeploy] <tr> [undeploy] <td class="row-center"><small>Apache Tomcat/6.0.26</small></td> [undeploy] <td class="row-center"><small>1.5.0_09-b01</small></td> [undeploy] <td class="row-center"><small>Sun Microsystems Inc.</small></td> [undeploy] <td class="row-center"><small>Windows XP</small></td> [undeploy] <td class="row-center"><small>5.1</small></td> [undeploy] <td class="row-center"><small>x86</small></td> [undeploy] </tr> [undeploy] </table> [undeploy] <br> [undeploy] <hr size="1" noshade="noshade"> [undeploy] <center><font size="-1" color="#525D76"> [undeploy] <em>Copyright © 1999-2010, Apache Software Foundation</em></font></center> [undeploy] </body> [undeploy] </html>

Search Results

Search found 9349 results on 374 pages for 'rpg maker xp'.

Page 374/374 | < Previous Page | 370 371 372 373 374

- by CraigTP

- by Arjan van Bentem

- by TK Kocheran

- by Austin

- by ami

- by Mattousai

- by Farid Z

- by Nuwan

- by dwj

- by Srekel

- by Vinko Vrsalovic

- by varun

- by Bilal Basharat

- by Zian Choy

- by salvationishere

- by MrDuk

- by burnt1ce

- by Prasanna K Rao

- by Nathan Spears

- by Nathan Spears

- by BillF

- by Sean Duggan

- by Devil Jin

- by Devil Jin

< Previous Page | 370 371 372 373 374