Search Results

Search found 10527 results on 422 pages for 'ccnet config'.

Page 375/422 | < Previous Page | 371 372 373 374 375 376 377 378 379 380 381 382  | Next Page >

  • My facebook blocking ACL has stopped working

    - by Josh
    This probably very simple. This was setup before I arrived, and has been working to block facebook. I recently eliminated some static port forwarding on this 2691 (as in, I don't think anything else has changed), and now facebook is once again accessible. Why is this list not doing what it seems like it should be doing (and was doing)? Would an extended outbound ACL be more appropriate (I think that would have been my thought if I had been tasked with creating this in the first place)? Something different? I've included below what I believe are the relevant parts of the config. interface FastEthernet0/0 ip address my.pub.ip.add my.ip.add.msk ip access-group 1 in ip nat outside ip virtual-reassembly duplex auto speed auto access-list 1 deny 69.171.224.0 0.0.31.255 access-list 1 deny 74.119.76.0 0.0.3.255 access-list 1 deny 204.15.20.0 0.0.3.255 access-list 1 deny 66.220.144.0 0.0.15.255 access-list 1 deny 69.63.176.0 0.0.15.255 access-list 1 permit any ip nat inside source list 105 interface FastEthernet0/0 overload access-list 105 deny ip 192.168.0.0 0.0.0.255 192.168.8.0 0.0.0.255 access-list 105 permit ip 192.168.0.0 0.0.0.255 any access-list 105 permit ip 192.168.1.0 0.0.0.255 any EDIT ACL is once again blocking Facebook. Here is the new definition for those interested... access-list 1 deny 66.220.144.0 0.0.7.255 access-list 1 deny 66.220.152.0 0.0.7.255 access-list 1 deny 69.63.176.0 0.0.7.255 access-list 1 deny 69.63.176.0 0.0.0.255 access-list 1 deny 69.63.184.0 0.0.7.255 access-list 1 deny 69.171.224.0 0.0.15.255 access-list 1 deny 69.171.239.0 0.0.0.255 access-list 1 deny 69.171.240.0 0.0.15.255 access-list 1 deny 69.171.255.0 0.0.0.255 access-list 1 deny 74.119.76.0 0.0.3.255 access-list 1 deny 173.252.64.0 0.0.31.255 access-list 1 deny 173.252.70.0 0.0.0.255 access-list 1 deny 173.252.96.0 0.0.31.255 access-list 1 deny 204.15.20.0 0.0.3.255 access-list 1 permit any

    Read the article

  • RHEL 6.x on Rackspace Cloud and Dedicated hardware experiencing Redis Timeouts

    - by zhallett
    I just recently set up a mixture of RHEL 6.1 Rackspace cloud hosts and RHEL 6.2 dedicated hosts using Rackconnect. I am experiencing intermittent Redis timeouts from within our Rails 3.2.8 app with Redis 2.4.16 running on the RHEL 6.2 dedicated hosts. There is no network latency or packet loss. Also there are no errors on any interfaces on our cloud or dedicated servers or on the managed firewall from Rackspace. When Redis timesout, there is nothing logged within redis even though it is set up to do debug logging. The only error we receive is from Airbrake saying there was a Redis timeout. Network topology: RHEL 6.1 cloud hosts <--> Alert logic IDS <--> Cisco ASA 5510 <--> RHEL 6.2 dedicated hosts (web nodes) (two way NAT) (db hosts running redis) Ping from db host to web host: 64 bytes from 10.181.230.180: icmp_seq=998 ttl=64 time=0.520 ms 64 bytes from 10.181.230.180: icmp_seq=999 ttl=64 time=0.579 ms 64 bytes from 10.181.230.180: icmp_seq=1000 ttl=64 time=0.482 ms --- web1.xxxxxx.com ping statistics --- 1000 packets transmitted, 1000 received, 0% packet loss, time 999007ms rtt min/avg/max/mdev = 0.359/0.535/5.684/0.200 ms Ping from web host to db host: 64 bytes from 192.168.100.26: icmp_seq=998 ttl=64 time=0.544 ms 64 bytes from 192.168.100.26: icmp_seq=999 ttl=64 time=0.452 ms 64 bytes from 192.168.100.26: icmp_seq=1000 ttl=64 time=0.529 ms --- data1.xxxxxx.com ping statistics --- 1000 packets transmitted, 1000 received, 0% packet loss, time 999017ms rtt min/avg/max/mdev = 0.358/0.499/6.120/0.201 ms Redis config: daemonize yes pidfile /var/run/redis/6379/redis_6379.pid port 6379 timeout 0 loglevel debug logfile /var/lib/redis/log syslog-enabled yes syslog-ident redis-6379 syslog-facility local0 databases 16 save 900 1 save 300 10 save 60 10000 rdbcompression yes dbfilename dump-6379.rdb dir /var/lib/redis maxclients 10000 maxmemory-policy volatile-lru maxmemory-samples 3 appendfilename appendonly-6379.aof appendfsync everysec no-appendfsync-on-rewrite no auto-aof-rewrite-percentage 100 auto-aof-rewrite-min-size 64mb slowlog-log-slower-than 10000 slowlog-max-len 1024 vm-enabled no vm-swap-file /tmp/redis.swap vm-max-memory 0 vm-page-size 32 vm-pages 134217728 vm-max-threads 4 hash-max-zipmap-entries 512 hash-max-zipmap-value 64 list-max-ziplist-entries 512 list-max-ziplist-value 64 set-max-intset-entries 512 zset-max-ziplist-entries 128 zset-max-ziplist-value 64 activerehashing yes Redis-cli info: redis-cli info redis_version:2.4.16 redis_git_sha1:00000000 redis_git_dirty:0 arch_bits:64 multiplexing_api:epoll gcc_version:4.4.6 process_id:4174 uptime_in_seconds:79346 uptime_in_days:0 lru_clock:1064644 used_cpu_sys:13.08 used_cpu_user:19.81 used_cpu_sys_children:1.56 used_cpu_user_children:7.69 connected_clients:167 connected_slaves:0 client_longest_output_list:0 client_biggest_input_buf:0 blocked_clients:6 used_memory:15060312 used_memory_human:14.36M used_memory_rss:22061056 used_memory_peak:15265928 used_memory_peak_human:14.56M mem_fragmentation_ratio:1.46 mem_allocator:jemalloc-3.0.0 loading:0 aof_enabled:0 changes_since_last_save:166 bgsave_in_progress:0 last_save_time:1352823542 bgrewriteaof_in_progress:0 total_connections_received:286 total_commands_processed:507254 expired_keys:0 evicted_keys:0 keyspace_hits:1509 keyspace_misses:65167 pubsub_channels:0 pubsub_patterns:0 latest_fork_usec:690 vm_enabled:0 role:master db0:keys=6,expires=0 edit 1: add redis-cli info output

    Read the article

  • Installing OpenLDAP: ldap_bind: Invalid credentials (49)

    - by Arcturus
    Hello. I've been trying to set up the OpenLDAP installed by default on Fedora 12, very unsuccessfully. My ultimate goal is to use LDAP authentication for user login and Apache, using the OpenLDAP server running on the same machine. The server is running, but the error I always get when I try to use ldapsearch or ldapadd is: ldap_bind: Invalid credentials (49) I've been following these tutorials, but none of them helped me: http://www.howtoforge.com/openldap_fedora7 http://www.redhat.com/docs/manuals/linux/RHL-9-Manual/ref-guide/s1-ldap-quickstart.html http://www.howtoforge.com/linux_ldap_authentication http://docs.fedoraproject.org/deployment-guide/f12/en-US/html/s1-ldap-pam.html http://www.openldap.org/doc/admin24/quickstart.html First, some components were already installed, and I installed these with yum: yum install openldap-servers openldap-devel Then, I created a basic slapd.conf file in /etc/openldap: database bdb suffix "dc=sniejana-sandbox,dc=com" rootdn "cn=root,dc=sniejana-sandbox,dc=com" rootpw {SSHA}cxdz55ygPu4T3ykg7dgu+L0VRvsFSeom directory /var/lib/ldap/sniejana-sandbox.com I obtained the rootpw with this command: slappasswd -s changeme I also created the /var/lib/ldap/sniejana-sandbox.com directory and made sure the entire contents of /var/lib/ldap were owned by the ldap user. I found two ldap.conf files, one in /etc and one in /etc/openldap. I don't know which is the right one. If I understood correctly, this file is to configure the client. I put this in both: HOST localhost BASE dc=sniejana-sandbox,dc=com I then ran the server with: service slapd start It said OK. Most of the tutorials above say to use the command ldapsearch -D "cn=Manager,dc=my-domain,dc=com" -W to ensure that everything's working. When I execute this command, a password prompt appears, and after entering the password, I get the error. ldapsearch -D "cn=root,dc=sniejana-sandbox,dc=com" -W Enter LDAP password: ldap_bind: Invalid credentials (49) The same thing happens when trying to use ldapadd. I tried with an encrypted and unencrypted password in slapd.conf, it doesn't change anything. Adding a -x for simple authentication doesn't change anything either. netstat -ap confirms the server is listening: tcp 0 0 *:ldap *:* LISTEN 4148/slapd tcp 0 0 *:ldap *:* LISTEN 4148/slapd ps -ef|grep slapd confirms the process is running: ldap 4148 1 0 15:22 ? 00:00:00 /usr/sbin/slapd -h ldap:/// -u ldap Running slaptest procudes config file testing succeeded. I read somewhere that the command ldapsearch -x -b '' -s base '(objectclass=*)' namingContext can confirm the server is running. It appears to work: # extended LDIF # # LDAPv3 # base <> with scope baseObject # filter: (objectclass=*) # requesting: namingContext # # dn: # search result search: 2 result: 0 Success # numResponses: 2 # numEntries: 1 I'm running out of ideas. Am I missing something obvious?

    Read the article

  • What other protocols must not be fire-walled for FTP to work?

    - by Chris
    my Netgear router randomly reset itself the other day loosing all of my config settings: DSL details, Firewall rules, the lot! So I set about restoring all of the details manually, but when it came to configuring the firewall I wanted improve the security by explicitly setting 'deny' rules for everything that I figured is 'non-essential', and (although not necessary) whilst I was at it I set explicit 'allow' for the 'essential' protocols. I'll admit now I didn't really know what I was doing and everything was just 'my best guess', but I enabled only DNS, HTTP, HTTPS, FTP, SFTP, TFTP with everything else blocked. This did not work for me as I could not access 99% of web sites (although strangely Google worked!), so I played around a bit more and found that (oddly) if I disabled just the explicit 'allow' rules then everything worked fine, for browsing anyway. Today I came to work on some web-sites via FTP and just could not get a consistent connection, it kept dropping out after a few files or being blocked by the server or simply not connecting. It would authenticate okay but then stop when retrieving the initial directory listing! e.g.: Status: Delaying connection for 1 second due to previously failed connection attempt... Status: Resolving address of ftp.domain.co.uk Status: Resolving address of ftp.domain.co.uk Status: Connecting to 123.123.123.123:21... Status: Connecting to 123.123.123.123:21... Status: Connection established, waiting for welcome message... Status: Connection established, waiting for welcome message... Response: 421 Too many connections (8) from this IP Error: Could not connect to server Status: Delaying connection for 5 seconds due to previously failed connection attempt... Response: 421 Too many connections (8) from this IP Error: Could not connect to server Status: Delaying connection for 5 seconds due to previously failed connection attempt... I've checked and re-checked the FTP settings (they worked before anyway), I have Googled the I.T. out of the various protocols that I have blocked in the fire-wall but none seem essential to FTP (other than FTP/SFTP etc. which I have passively enabled). I'm (clearly) no server engineer, or protocols / fire-wall expert so I was hoping that some one could maybe shed some light on why my FTP is failing. I've been wondering if I ought to be allowing BGP, BOOTP and/or IDENT (or any others)? What other protocols are required for FTP? Thanks in advance!

    Read the article

  • Checking the configuration of two systems to determine changes

    - by None
    We are standing up a replicant data center at work and need to ensure that the new data center is configured (nearly) identically to the original. The new data center will be differently addressed and named than the original and will have differing user accounts, but all the COTS, patches, and configurations should be the same. We would normally ghost the original servers and install those images onto the new machines, however, we have a few problematic pieces of COTS that require we install them outside of an image due to how they capture the setup of the network during their installation and maintain it within their configuration information (in some cases storing it in various databases). We have tried multiple times and this piece of COTS cannot be captured within a ghost image unless the destination machine will have an identical network setup (all the same IPs, hostnames, user accounts, etc across the entire network) as the original. In truth, it is the setup of these special COTS that I want to audit the most because they are difficult to install and configure in the first place. In light of the fact that we can’t simply ghost, I’m trying to find a reasonable manner to audit the new data center and check to see if it is setup like the original (some sort of system wide configuration audit or integrity check). I’m considering using something like Tripwire for Servers to capture the configuration on the source machines and then run an audit on the destination machines. I understand that it will still show some differences due to the minor config changes, but I’m hoping that it will eliminate the majority of the work. Here are some of the constraints I’m working under: Data center is comprised of multiple Windows and Linux machines of differing versions (about 20 total) I absolutely cannot ghost or snap any other type of image of these machines … at least not in their final configuration I want to audit the final configuration to ensure all of the COTS, patches, configurations, etc are installed and setup properly (as compared to the original data center) I would rather not install any additional tools on these machines … I’d much rather run it from a standalone machine or off a DVD Price of tools is important but not an impossible burden, however, getting a solution soon is important (I can’t take the time to roll my own tools to do this) For the COTS that stores the network information, I don’t know all of the places it stores the network information … so it would be unlikely I could find a way in the near future to adjust its setup after the installation has occurred Anyone have any thoughts or alternate approaches? Can anyone recommend tools that would be usable for system wide configuration audits?

    Read the article

  • chrooting user causes "connection closed" message when using sftp

    - by George Reith
    First off I am a linux newbie so please don't assume much knowledge. I am using CentOS 5.8 (final) and using OpenSSH version 5.8p1. I have made a user playwithbits and I am attempting to chroot them to the directory home/nginx/domains/playwithbits/public I am using the following match statement in my sshd_config file: Match group web-root-locked ChrootDirectory /home/nginx/domains/%u/public X11Forwarding no AllowTcpForwarding no ForceCommand /usr/libexec/openssh/sftp-server # id playwithbits returns: uid=504(playwithbits) gid=504(playwithbits) groups=504(playwithbits),507(web-root-locked) I have changed the user's home directory to: home/nginx/domains/playwithbits/public Now when I attempt to sftp in with this user I instantly get the message: connection closed Does anyone know what I am doing wrong? Edit: Following advice from @Dennis Williamson I have connected in debug mode (I think... correct me if I'm wrong). I have made a bit of progress by using chmod to set permissions recursively of all files in the directly to 700. Now I get the following messages when I attempt to log on (still connection refused): Connection from [My ip address] port 38737 debug1: Client protocol version 2.0; client software version OpenSSH_5.6 debug1: match: OpenSSH_5.6 pat OpenSSH* debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_5.8 debug1: permanently_set_uid: 74/74 debug1: list_hostkey_types: ssh-rsa,ssh-dss debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug1: kex: client->server aes128-ctr hmac-md5 none debug1: kex: server->client aes128-ctr hmac-md5 none debug1: SSH2_MSG_KEX_DH_GEX_REQUEST received debug1: SSH2_MSG_KEX_DH_GEX_GROUP sent debug1: expecting SSH2_MSG_KEX_DH_GEX_INIT debug1: SSH2_MSG_KEX_DH_GEX_REPLY sent debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug1: SSH2_MSG_NEWKEYS received debug1: KEX done debug1: userauth-request for user playwithbits service ssh-connection method none debug1: attempt 0 failures 0 debug1: user playwithbits matched group list web-root-locked at line 91 debug1: PAM: initializing for "playwithbits" debug1: PAM: setting PAM_RHOST to [My host info] debug1: PAM: setting PAM_TTY to "ssh" debug1: userauth-request for user playwithbits service ssh-connection method password debug1: attempt 1 failures 0 debug1: PAM: password authentication accepted for playwithbits debug1: do_pam_account: called Accepted password for playwithbits from [My ip address] port 38737 ssh2 debug1: monitor_child_preauth: playwithbits has been authenticated by privileged process debug1: SELinux support disabled debug1: PAM: establishing credentials User child is on pid 3942 debug1: PAM: establishing credentials Changed root directory to "/home/nginx/domains/playwithbits/public" debug1: permanently_set_uid: 504/504 debug1: Entering interactive session for SSH2. debug1: server_init_dispatch_20 debug1: server_input_channel_open: ctype session rchan 0 win 2097152 max 32768 debug1: input_session_request debug1: channel 0: new [server-session] debug1: session_new: session 0 debug1: session_open: channel 0 debug1: session_open: session 0: link with channel 0 debug1: server_input_channel_open: confirm session debug1: server_input_global_request: rtype [email protected] want_reply 0 debug1: server_input_channel_req: channel 0 request env reply 0 debug1: session_by_channel: session 0 channel 0 debug1: session_input_channel_req: session 0 req env debug1: server_input_channel_req: channel 0 request subsystem reply 1 debug1: session_by_channel: session 0 channel 0 debug1: session_input_channel_req: session 0 req subsystem subsystem request for sftp by user playwithbits debug1: subsystem: cannot stat /usr/libexec/openssh/sftp-server: Permission denied debug1: subsystem: exec() /usr/libexec/openssh/sftp-server debug1: Forced command (config) '/usr/libexec/openssh/sftp-server' debug1: session_new: session 0 debug1: Received SIGCHLD. debug1: session_by_pid: pid 3943 debug1: session_exit_message: session 0 channel 0 pid 3943 debug1: session_exit_message: release channel 0 debug1: session_by_channel: session 0 channel 0 debug1: session_close_by_channel: channel 0 child 0 debug1: session_close: session 0 pid 0 debug1: channel 0: free: server-session, nchannels 1 Received disconnect from [My ip address]: 11: disconnected by user debug1: do_cleanup debug1: do_cleanup debug1: PAM: cleanup debug1: PAM: closing session debug1: PAM: deleting credentials

    Read the article

  • How do I combine static and dynamic DHCP leases on a Cisco router?

    - by Brad
    Basically, what I need is super similar to the unanswered cisco forum question below: https://supportforums.cisco.com/message/3139749#3139749 I have a Cisco 850 Series router. I have configured a DHCP pool for the 10.0.0.0/24 network. I have excluded 10.0.0.1 - 10.0.0.99 from the DHCP pool. I want to add a static DHCP pool for stuff and I want DHCP to statically assign them the addresses of my choice below 100. Actually, I don't care what addresses I statically assign. They can be anything in the pool for all I care, I just want it to work. Why are you doing this? Just statically assign the IPs on the devices! I don't want to do this because I have some laptop users. They could obviously only use that static IP here. This isn't a problem if they could be bothered to change any location setting or something. They can't. So it HAS to be DHCP. It also has to be static IPs because I need to forward ports to them. I know, I know, this is weird but it's an apartment LAN/WLAN so this isn't exactly a typical use case. Relevant sections of config below: ip dhcp excluded-address 10.0.0.1 10.0.0.99 ! ip dhcp pool Internal-net import all network 10.0.0.0 255.255.255.0 default-router 10.0.0.1 domain-name 1770.local lease 7 ! ip dhcp pool static-pool import all origin file flash://staticmap default-router 10.0.0.1 domain-name 1770.local Contents of staticmap: *time* Aug 5 2010 09:00 AM *version* 2 !IP address Type Hardware address Lease expiration 10.0.0.100/24 1 001f.5b3e.d50a Infinite *end* You can see here I was trying addresses outside the excluded-address range to see if that would make any difference. My testing machine's MAC: mainframe:~ brad$ ifconfig en1 en1: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500 ether 00:1f:5b:3e:d5:0a What shows up in the DHCP binding table: basestar#show ip dhcp binding Bindings from all pools not associated with VRF: IP address Client-ID/ Lease expiration Type Hardware address/ User name 10.0.0.112 0100.1f5b.3ed5.0a Aug 12 2010 10:06 AM Automatic What's up with the funny looking MAC in the DHCP binding table?? Is what I'm trying to accomplish basically impossible? Am I going about this the wrong way? All I want to to be able to port forward some ports to specific devices. The way I would do this with a consumer router is to do what I'm trying to do here; assign static DHCP to those devices then configure PAT for ports on those addresses.

    Read the article

  • Video memory buswidth vs video memory Bandwidth

    - by Mixxiphoid
    My current video card (9600GT) is dying and I'm searching for a new video card. Between acquiring my current one and now, I got a lot more knowledge about hardware and I want to use that to pick my new card. So I decided to not just buy some popular card blindly, but to search for a card able to handle my hardware requirements. I searched the specs at the NVidia site for the GT640 and was confused by the memory section and some questions raised. My current card's memory bus width is 256bit and has 1GB of memory. I checked Google about the importance of bus width. And all the links basically said the same 'The higher the number the more potential simultaneously traffic can be transferred'. This was already clear to me, yet there are currently a lot of new cards which are considered better than my current one with a lower bus width. To go in more detail about my question I copied the memory info from the NVidia site: GT 640 GT640 GDDR5 Memory Specs: Memory Clock 1.8 Gbps 5.0 Gbps Standard Memory Config 2048 MB 1024 MB Memory Interface DDR3 GDDR5 Memory Interface Width 128-bit 64-bit Memory Bandwidth (GB/sec) 28.5 40.0 What puzzled me is that the Memory Bandwidth seems to me the most important part, yet the lower bus width has the higher 'performance'. Is this due to the fact the memory interface is GDDR5 and is therefore able to have a higher memory clock speed (5Gbps)? If I am to buy a new video card, should I check the bus width? Memory clock? Bandwith? Amount of memory? My current card ahs 1GB memory, so I was searching for a 2GB memory card, but now I'm not so sure any more whether that is really 'better'. My main question: To me it seems that memory performance is made up by the combination of bus width and frequency. Is this true? If yes, why are there so many sites telling me I need to get a card with a high bus width? If no, then what IS important when it goes about memory performance on a video card. NOTE: The memory bandwidth is (almost) never displayed on vendor sites. How can I determine which card is better without knowing the bandwith?

    Read the article

  • nginx probably deliering wrong filetype for .css file with php tags

    - by Katai
    And again - NGINX is giving me many Questions today :) Like always, I already tried around for a while, but cant seem to fix this issue: I just configured NGINX to handle my .css files equal to my .php files (to parse PHP tags inside the CSS file). This works perfectly, and the file is found and delivered. I could debug it with FIrebug, and everything is OK (it displays the contents of the .css inside the opened <link> tag). So, everything working, right? Wrong. It has the CSS, but it does not interpret it! What I mean by this: apparently, the file-type of the CSS (or aplication-type, whatever) is wrong. The Page can access the CSS, but doesnt bother at all to actually use it. What I checked / tried: There are no PHP errors inside of the .css, so that one is out The .css is accessible. I can call the URI manually, or check if the included URL finds it: both works The .css has no syntax errors (i switched to a css that just has body {background-color: #000; } It works whitout NGINX I deleted the browser cache / restarted NGINX after config rewrites Here the configuration: server { listen 80; server_name localhost; access_log /var/log/nginx/board.access_log; error_log /var/log/nginx/board.error_log warn; root /var/www/board/public; index index.php; fastcgi_index index.php; location / { try_files $uri $uri /index.php; } location ~ (\.php|\.css)$ { try_files $uri =404; include /etc/nginx/fastcgi_params; #keepalive_timeout 0; fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; fastcgi_pass 127.0.0.1:7777; } } Firebug 'Network' Response Header: Connection keep-alive Content-Encoding gzip Content-Type text/html Date Sat, 16 Jun 2012 10:08:40 GMT Server nginx/1.0.5 Transfer-Encoding chunked X-Powered-By PHP/5.3.6-13ubuntu3.7 I think I just answered my own question. Is the Content-Type text/html the problem? How can I remove that? My personal guess is that I have to use this in some way include /etc/nginx/mime.types; default_type application/octet-stream; But I'm not sure... anyone an idea how to solve this? TLDR; CSS file is delivered correctly, but it doesnt seem to be 'used' as CSS from the browser. (Tested, works on apache)

    Read the article

  • Rails 3 shows 404 error instead of index.html (nginx + unicorn)

    - by Miko
    I have an index.html in public/ that should be loading by default but instead I get a 404 error when I try to access http://example.com/ The page you were looking for doesn't exist. You may have mistyped the address or the page may have moved. This has something to do with nginx and unicorn which I am using to power Rails 3 When take unicorn out of the nginx configuration file, the problem goes away and index.html loads just fine. Here is my nginx configuration file: upstream unicorn { server unix:/tmp/.sock fail_timeout=0; } server { server_name example.com; root /www/example.com/current/public; index index.html; keepalive_timeout 5; location / { try_files $uri @unicorn; } location @unicorn { proxy_pass http://unicorn; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; proxy_set_header Host $host; proxy_redirect off; } } My config/routes.rb is pretty much empty: Advertise::Application.routes.draw do |map| resources :users end The index.html file is located in public/index.html and it loads fine if I request it directly: http://example.com/index.html To reiterate, when I remove all references to unicorn from the nginx conf, index.html loads without any problems, I have a hard time understanding why this occurs because nginx should be trying to load that file on its own by default. -- Here is the error stack from production.log: Started GET "/" for 68.107.80.21 at 2010-08-08 12:06:29 -0700 Processing by HomeController#index as HTML Completed in 1ms ActionView::MissingTemplate (Missing template home/index with {:handlers=>[:erb, :rjs, :builder, :rhtml, :rxml, :haml], :formats=>[:html], :locale=>[:en, :en]} in view paths "/www/example.com/releases/20100808170224/app/views", "/www/example.com/releases/20100808170224/vendor/plugins/paperclip/app/views", "/www/example.com/releases/20100808170224/vendor/plugins/haml/app/views"): /usr/local/rvm/gems/ruby-1.9.2-rc2/gems/actionpack-3.0.0.beta4/lib/action_view/paths.rb:14:in `find' /usr/local/rvm/gems/ruby-1.9.2-rc2/gems/actionpack-3.0.0.beta4/lib/action_view/lookup_context.rb:79:in `find' /usr/local/rvm/gems/ruby-1.9.2-rc2/gems/actionpack-3.0.0.beta4/lib/action_view/base.rb:186:in `find_template' /usr/local/rvm/gems/ruby-1.9.2-rc2/gems/actionpack-3.0.0.beta4/lib/action_view/render/rendering.rb:45:in `_determine_template' /usr/local/rvm/gems/ruby-1.9.2-rc2/gems/actionpack-3.0.0.beta4/lib/action_view/render/rendering.rb:23:in `render' /usr/local/rvm/gems/ruby-1.9.2-rc2/gems/haml-3.0.15/lib/haml/helpers/action_view_mods.rb:13:in `render_with_haml' etc... -- nginx error log for this virtualhost comes up empty: 2010/08/08 12:40:22 [info] 3118#0: *1 client 68.107.80.21 closed keepalive connection My guess is unicorn is intercepting the request to index.html before nginx gets to process it.

    Read the article

  • Cannot access website from inside network

    - by musclez
    I have a website running from my internal network available at the example IP 192.168.1.5. When I type this in to the browser, it redirects to my domain name ie, "example.com", and gives me Error code: ERR_CONNECTION_REFUSED. Any other machine that is inside of the network can access the website. The website is also accessible outside of the network. Other services from the server, like file sharing or ftp, are available to all machines in the network including the one i'm having issues http issues with. The issue may be linked to a proxy service, but from my understanding the service has been completely disabled and any executable have been uninstalled from the machine. I am wondering if there is some residual proxy information remaining on the machine that limits the connection. I'm fairly positive that "example.com" is what is being blocked by the local machine, and not an IP address being blocked or a faulty connection. When I examine the hosts file, there are no redirects to the local machine for "example.com". There was a rule, as on my other machines within the network: 192.168.1.5 example.com But i have since removed that for troubleshooting purposes. What intrigued me is that when I use the actual IP, the IP address will redirect to the domain in the browser and THEN say ERR_CONNECTION_REFUSED. Server-Side Results The server logs are reporting this: example.com ::1 - - [Date & time] "OPTIONS * HTTP/1.0" 200 126 "-" "Apache/2. 2.22 (Unix) (internal dummy connection)" However, this seems to be irrelevant as it is not triggered when I try to connect to the server with the specified machine. Fiddler results: Host: *example.com* Proxy-Connection: keep-alive Chrome-Side [Fiddler] The connection to 'example.com' failed. Error: ConnectionRefused (0x274d). System.Net.Sockets. SocketException No connection could be made because the target machine actively refused it 01.23.45.67:80 01.23.45.67:80 would be the external IP, which the server and the machine in question both share. I am doing so reading into 0x274d and its coming back with .NET web.config information. I am still at a loss to what to do with this information. I have WireShark running as well. Theres is a lot of sensitive information in the readout and I'm not sure what to extract from it. Either way, if it helps, I can access that information if anyone would like me to. Thanks for the help!

    Read the article

  • Aliased network interfaces and isc dhcp server

    - by Jonatan
    I have been banging my head on this for a long time now. There are many discussions on the net about this and similar problems, but none of the solutions seems to work for me. I have a Debian server with two ethernet network interfaces. One of them is connected to internet, while the other is connected to my LAN. The LAN network is 10.11.100.0 (netmask 255.255.255.0). We have some custom hardware that use network 10.4.1.0 (netmask 255.255.255.0) and we can't change that. But we need all hosts on 10.11.100.0 to be able to connect to devices on 10.4.1.0. So I added an alias for the LAN network interface so that the Debian server acts as a gateway between 10.11.100.0 and 10.4.1.0. But then the dhcp server stopped working. The log says: No subnet declaration for eth1:0 (no IPv4 addresses). ** Ignoring requests on eth1:0. If this is not what you want, please write a subnet declaration in your dhcpd.conf file for the network segment to which interface eth1:1 is attached. ** No subnet declaration for eth1:1 (no IPv4 addresses). ** Ignoring requests on eth1:1. If this is not what you want, please write a subnet declaration in your dhcpd.conf file for the network segment to which interface eth1:1 is attached. ** I had another server before, also running Debian but with the older dhcp3 server, and it worked without any problems. I've tried everything I can think of in dhcpd.conf etc, and I've also compared with the working configuration in the old server. The dhcp server need only handle devices on 10.11.100.0. Any hints? Here's all relevant config files: /etc/default/isc-dhcp-server INTERFACES="eth1" /etc/network/interfaces (I've left out eth0, that connects to the Internet, since there is no problem with that.) auto eth1:0 iface eth1:0 inet static address 10.11.100.202 netmask 255.255.255.0 auto eth1:1 iface eth1:1 inet static address 10.4.1.248 netmask 255.255.255.0 /etc/dhcp/dhcpd.conf ddns-update-style none; option domain-name "???.com"; option domain-name-servers ?.?.?.?; default-lease-time 86400; max-lease-time 604800; authorative; subnet 10.11.100.0 netmask 255.255.255.0 { option subnet-mask 255.255.255.0; pool { range 10.11.100.50 10.11.100.99; } option routers 10.11.100.102; } I have tried to add shared-network etc, but didn't manage to get that to work. I get the same error message no matter what...

    Read the article

  • Postfix: Relay access denied

    - by Joseph Silvashy
    When I telnet to my server thats running postfix and try to send an email: MAIL FROM:<[email protected]> #=> 250 2.1.0 Ok RCPT TO:<[email protected]> #=> 554 5.7.1 <[email protected]>: Relay access denied I couldn't really find the answer on the site or by looking at other users question/answers, I'm not sure where to start. Ideas? Update So basically looking at the docs: http://www.postfix.org/SMTPD_ACCESS_README.html (section: Getting selective with SMTP access restriction lists), I don't seem to have any of those directives in etc/postfix/main.cf like smtpd_client_restrictions = permit_mynetworks, reject or any of the other ones, so I'm quite confused. But really I'm going to have a rails app connect to the server and send the emails, so I'm not sure how to handle it. Here is what my config file looks like: # See /usr/share/postfix/main.cf.dist for a commented, more complete version # Debian specific: Specifying a file name will cause the first # line of that file to be used as the name. The Debian default # is /etc/mailname. #myorigin = /etc/mailname smtpd_banner = $myhostname ESMTP $mail_name (Ubuntu) biff = no # appending .domain is the MUA's job. append_dot_mydomain = no # Uncomment the next line to generate "delayed mail" warnings #delay_warning_time = 4h readme_directory = no # TLS parameters smtpd_tls_cert_file=/etc/ssl/certs/ssl-cert-snakeoil.pem smtpd_tls_key_file=/etc/ssl/private/ssl-cert-snakeoil.key smtpd_use_tls=yes smtpd_tls_session_cache_database = btree:${data_directory}/smtpd_scache smtp_tls_session_cache_database = btree:${data_directory}/smtp_scache # See /usr/share/doc/postfix/TLS_README.gz in the postfix-doc package for # information on enabling SSL in the smtp client. myhostname = rerecipe-utils alias_maps = hash:/etc/aliases alias_database = hash:/etc/aliases myorigin = /etc/mailname mydestination = $myhostname, localhost.$mydomain, localhost, mail.rerecipe.com, rerecipe.com relayhost = mailbox_size_limit = 0 recipient_delimiter = + inet_interfaces = all inet_protocols = all mynetworks = 127.0.0.0/8 204.232.207.0/24 10.177.64.0/19 [::1]/128 [fe80::%eth0]/64 [fe80::%eth1]/64 Something to note is that relayhost is blank, this is the default configuration file that was created when I installed Postfix, when testing to connect with openssl I get this: ~% openssl s_client -connect mail.myhostname.com:25 -starttls smtp CONNECTED(00000003) depth=0 /CN=myhostname verify error:num=18:self signed certificate verify return:1 depth=0 /CN=myhostname verify return:1 --- Certificate chain 0 s:/CN=myhostname i:/CN=myhostname --- Server certificate -----BEGIN CERTIFICATE----- MIIBqTCCARICCQDDxVr+420qvjANBgkqhkiG9w0BAQUFADAZMRcwFQYDVQQDEw5y ZXJlY2lwZS11dGlsczAeFw0xMDEwMTMwNjU1MTVaFw0yMDEwMTAwNjU1MTVaMBkx FzAVBgNVBAMTDnJlcmVjaXBlLXV0aWxzMIGfMA0GCSqGSIb3DQEBAQUAA4GNADCB iQKBgQDODh2w4A1k0qiPNPhkrPj8sfkxpKPTk28AuZhgOEBYBLeHacTKNH0jXxPv P3TyhINijvvdDPzyuPJoTTliR2EHR/nL4DLhr5FzhV+PB4PsIFUER7arx+1sMjz6 5l/Ubu1ppMzW9U0IFNbaPm2AiiGBQRCQN8L0bLUjzVzwoSRMOQIDAQABMA0GCSqG SIb3DQEBBQUAA4GBALi2vvk9TGKJubXYJbU0PKmVmsfzFK35yLqr0keiDBhK2Leg 274sWxEH3ds8mUaRftuFlXb7RYAGNlVyTuMTY3CEcnqIsH7F2McCUTpjMzu/o1mZ O/B21CelKetBd1u79Gkrv2vWyN7Csft6uTx5NIGG2+pGi3r0gX2r0Hbu2K94 -----END CERTIFICATE----- subject=/CN=myhostname issuer=/CN=myhostname --- No client certificate CA names sent --- SSL handshake has read 1203 bytes and written 360 bytes --- New, TLSv1/SSLv3, Cipher is DHE-RSA-AES256-SHA Server public key is 1024 bit Compression: NONE Expansion: NONE SSL-Session: Protocol : TLSv1 Cipher : DHE-RSA-AES256-SHA Session-ID: 1AA4B8BFAAA85DA9ED4755194C50311670E57C35B8C51F9C2749936DA11918E4 Session-ID-ctx: Master-Key: 9B432F1DE9F3580DCC6208C76F96631DC5A4BC517BDBADD5F514414DCF34AC526C30687B96C5C4742E9583555A118232 Key-Arg : None Start Time: 1292985376 Timeout : 300 (sec) Verify return code: 18 (self signed certificate) --- 250 DSN Oddly enough when I try to send an email from the machine itself it does work: echo test | mail -s "test subject" [email protected]

    Read the article

  • Why is my new Phenom II 965 BE not significantly faster than my old Athlon 64 X2 4600+?

    - by Software Monkey
    I recently rebuilt my 5 year old computer. I upgraded all core components, in particular from an Athlon 64 X2 4600+ at 2.4 GHz with DDR2 800 to a Phenom II 965 BE (quad core) at 3.6 GHz with DDR3 1333 (actually 1600, but testing consistently detected memory errors at 1600). The motherboard is also much newer and better. The HDD's (x3), DVD writer and card reader are the same. The BIOS memory config is auto-everything except the base timing which I overrode to 1T instead of 2T. The BIOS CPU multiplier is slightly over-clocked to 3.6 GHz from the stock 3.4 GHz. I noticed compiling Java is slower than I expected. As it happens I have some (single-threaded) Java pattern-matching code which is CPU and memory bound and for which I have performance numbers recorded on a number of hardware platforms, including my old system. So I did a test run on the new equipment and was stunned to find that the numbers are only slightly better than my old system, about 25%. The data set it is operating on is a 148,975 character array, which should easily fit in caches, but in any event the new CPU has larger caches all around. The system was, of course, otherwise idle for the test and the test run is a timed 10 seconds to eliminate scheduling anomalies. A long while ago, when I upgraded only memory from DD2 667 to DDR2 800 there was no change in performance of this test, which subjectively supports that the test cycle does not need to (significantly) access main memory, but yes it is creating and garbage collecting a large number of objects in the process of this test (low millions of matches are found for the pattern set). I am about 99.999% certain the code hasn't changed since I last ran it on 2009-03-17 - but I can't easily retest the old hardware, because it is currently in pieces on my work-bench waiting to be built into a new computer for my kids. Note that Windows (XP) reports a CPU speed of 795 MHz unless I have some thing running. With stuff running it seems to jump all over the place each time I use ALT-Pause to display the system properties, everywhere from 795 MHz to 3.4 Ghz. So why might my shiny new hardware under-performing so badly? EDIT: The old memory was Mushkin DDR2 800 with timings set for auto which should have been 5-5-5-12. The new memory is Corsair DDR3 1600, running at 1333 with timings also auto which are 9-9-9-21. In both cases they are a paired set of dual channel DIMMs. I was waiting to ensure my system was stable before tweaking with memory timings.

    Read the article

  • Snow Leopard can see Windows shares in Finder but can't connect

    - by Randy Miller
    I have an iMac with the latest version of Snow Leopard on it. I have a NAS drive and a Windows machine that both show up in the Finder's 'Shared' section. However, if I click on them, Finder says "Connection Failed". Clicking on 'Connect As...' gives an error dialog that says "The server 'blah' may not exist or it is unavailable at this time." Points of interest: All machines are receiving their IP/DNS info from the router using DHCP. I have a Mac Mini on the same network that connects to the NAS drive and windows machine perfectly with no config (i.e. worked out of the box). Both Macs are on the same version of Snow Leopard. There is no password required to access the NAS share. I've never setup a WINS server on any machines and all machines are using 'workgroup' by default. I've tried putting "workgroup" in the Mac's workgroup entry and have tried leaving it blank, neither solves the problem. Here are some things I have tried: Finder-Connect To Server: smb:///share. This works, but by name does not. Terminal-mount_smbfs //@/share share. This also works by ip, but not be name, resulting in "mount_smbfs: server connection failed: No route to host". If I put the IP address of the NAS in the WINS server entry in the Mac's network setup, I can connect by name. It obviously seems to be a name resolution error, but I can't figure out why. The only thing that has changed since it used to work is that I got a new router that now gives out DHCP (all machines are dhcp clients) addresses of 192.168.x.x, but used to be 10.0.x.x. I've grep'd through everything that might have saved that old address, but can't find anything. It's also worth noting that the second Mac (the one that connects successfully) was added to the network after the router change. Please let me know if there are additional points of information needed to troubleshoot this further. Thanks, Randy

    Read the article

  • HAProxy causing delay

    - by user1221444
    I am trying to configure HAProxy to do load balancing for a custom webserver I created. Right now I am noticing an increasing delay with HAProxy as the size of the return message increases. For example, I ran four different tests, here are the results: Response 15kb through HAProxy: Avg. response time: .34 secs Transacation rate: 763 trans/sec Throughput: 11.08 MB/sec Response 2kb through HAProxy: Avg. response time: .08 secs Transaction rate: 1171 trans / sec Throughput: 2.51 MB/sec Response 15kb directly to server: Avg. response time: .11 sec Transaction rate: 1046 trans/sec throughput: 15.20 MB/sec Response 2kb directly to server: Avg. Response time: .05 secs Transaction rate: 1158 trans/sec Throughput: 2.48 MB/sec All transactions are HTTP requests. As you can see, there seems to be a much bigger difference between response times for when the response is bigger, than when it is smaller. I understand there will be a slight delay when using HAProxy. Not sure if it matters, but the test itself was run using siege. And during the test there was only one server behind the HAProxy(the same that was used in the direct to server tests). Here is my haproxy.config file: global log 127.0.0.1 local0 log 127.0.0.1 local1 notice maxconn 10000 user haproxy group haproxy daemon #debug defaults log global mode http option httplog option dontlognull retries 3 option redispatch option httpclose maxconn 10000 contimeout 10000 clitimeout 50000 srvtimeout 50000 balance roundrobin stats enable stats uri /stats listen lb1 10.1.10.26:80 maxconn 10000 server app1 10.1.10.200:8080 maxconn 5000 I couldn't find much in terms of options in this file that would help my problem. I have heard suggestions that I may have to adjust a few of my sysctl settings. I could not find a lot of information on this however, most documentation is for Linux 2.4 and 2.6 on the sysctl stuff, I am running 3.2(Ubuntu server 12.04), which seems to auto tuning, so I have no clue what I should or shouldn't be changing. Most settings changes I tried had no effect or a negative effect on performance. Just a notice, this is a very preliminary test, and my hope is that at deployment time, my HAProxy will be able to balance 10k-20k requests/sec to many servers, so if anyone could provide information to help me reach that goal, it would be much appreciated. Thank you very much for any information you can provide. And if you need anymore information from me please let me know, I will get you anything I can.

    Read the article

  • NX Client for Windows 7 Opens Remote Desktop in Multiple Windows

    - by Corey Kennedy
    What I'm trying to do: access my Ubuntu desktop remotely via NX Client on my Windows 7 laptop. My environment: server: Ubuntu 10.10 on AMD 1Ghz/512MB RAM PC client: Windows 7 on ThinkPad sl510 Software: server is running NXServer 3.4.0. Using xfce4 window manager. Laptop is using NXClient for Windows In my NX Client "Desktop" settings I've selected "Unix" and "Custom" for OS and environment. I've also specified "startxfce4" as the application to launch when NX connects. I am able to authenticate an NX session on my laptop. By this I mean, I can start the client on my laptop, enter credentials for my Linux user, and NX establishes a connection to the server and attempts to open a remote desktop window. The problem, though, is that this remote desktop is "fragmented" into many Windows. One window will display the bulk of my desktop (complete with desktop icons for "Home," "File System," and "Trash") while another window will contain the taskbar, and another window will contain the application strip. I can select each of these Windows individually, but I cannot click on any objects within them. I've searched Super User, Ubuntu Forums, NX help, Server Fault, and tried many Google searches - none have turned up another case of this particular problem. I'm stumped. Does anyone have any suggestions for what I might try? I'm guessing the problem has to do with my xfce config files, but I've only just setup this server - it's been a long time since I've used Linux and there's a lot I just don't know. What I am NOT trying to do: use Desktop sharing from Ubuntu, whereby I VNC into a desktop that I've already established on the server. I am trying to configure this Linux box as a headless server that I can stash someplace out-of-the-way in my house, then interact with through my laptop. I don't want to have a monitor or keyboard connected to the Linux box. Thanks for your help! edit: 1/19/2011 Well, this is truly bizarre. To my knowledge I've made no changes to either system - the laptop or the server. But today after starting up the server for the first time in a few days, and making sure that nxserver was running, I was able to connect with the nxclient from my laptop with no problems. I have a full desktop in a single window and I am able to interact with it normally. This is really weird, but the problem seems to be resolved.

    Read the article

  • PHP app breaks on Nginx, but works on Apache

    - by rizon1990
    I want to migrate a PHP application from Apache to Nginx. The problem is that the App breaks, because the routing doesn't work anymore and I'm not exactly sure how to fix it. The PHP application includes some .htaccess files and I tried to convert those to Nginx. The first one is in the document root: <IfModule mod_rewrite.c> RewriteEngine on RewriteRule ^$ public/ [L] RewriteRule (.*) public/$1 [L] </IfModule> The second one is in /public/ <IfModule mod_rewrite.c RewriteEngine On RewriteCond %{REQUEST_FILENAME} !-f RewriteCond %{REQUEST_FILENAME} !-d # Rewrite all other URLs to index.php/URL RewriteRule ^(.*)$ index.php?url=$1 [PT,L] </IfModule> <IfModule !mod_rewrite.c> ErrorDocument 404 index.php </IfModule> The third and last one is: deny from all My nginx version of it looks like the following: #user nobody; worker_processes 1; #pid logs/nginx.pid; events { worker_connections 1024; } http { include mime.types; default_type application/octet-stream; sendfile on; #tcp_nopush on; keepalive_timeout 65; gzip on; server { listen 8080; server_name localhost; root /Library/WebServer/Documents/admin; location / { index index.php; rewrite ^/$ /public/ break; rewrite ^(.*)$ /public/$1 break; } location /public { if (!-e $request_filename){ rewrite ^(.*)$ /index.php?url=$1 break; } } location /library { deny all; } #error_page 404 /404.html; # redirect server error pages to the static page /50x.html # error_page 500 502 503 504 /50x.html; location = /50x.html { root html; } location ~ \.php$ { root /Library/WebServer/Documents/admin; fastcgi_pass 127.0.0.1:9000; fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; include fastcgi_params; } } } The problem I face is that something that the routing is broken and just returns a 404 page instead. Hopefully someone has an idea and know how to fix it ;) Thanks EDIT I got it working with this config location /library { deny all; } location ~* ^.+.(jpg|jpeg|gif|png|ico|css|zip|tgz|gz|rar|bz2|doc|xls|exe|pdf|ppt|txt|tar|mid|midi|wav|bmp|rtf|js)$ { access_log off; rewrite ^(.*)$ /public/$1 break; } location / { rewrite ^/(.+)$ /index.php?url=$1 last; } I'm sure there are better solutions and I'm open for suggestions.

    Read the article

  • LXC container can only access host via bridge

    - by vitaut
    I have an LXC container with i686 Ubuntu 12.04 running on a x86_64 Ubuntu 12.04 host. I've set up a bridge using instructions here. However the ping from the container only goes through to the host and not to other machines on the local network. Similarly only the host and not the other machines see the container OS. The host's /etc/network/interfaces file looks as follows: auto lo iface lo inet loopback iface eth0 inet manual auto br0 iface br0 inet dhcp bridge_ports eth0 bridge_fd 0 bridge_maxwait 0 The container's /etc/network/interfaces file looks as follows: auto lo iface lo inet loopback auto eth0 iface eth0 inet dhcp And here's the relevant part of the container's config: lxc.network.type=veth lxc.network.link=br0 lxc.network.flags=up Any ideas what I'm doing wrong? Additional info: The output of iptables-save on host: $ sudo iptables-save # Generated by iptables-save v1.4.12 on Sat Oct 26 06:06:48 2013 *filter :INPUT ACCEPT [6854:721708] :FORWARD ACCEPT [4067:538895] :OUTPUT ACCEPT [4967:522405] COMMIT # Completed on Sat Oct 26 06:06:48 2013 # Generated by iptables-save v1.4.12 on Sat Oct 26 06:06:48 2013 *nat :PREROUTING ACCEPT [82235:21547307] :INPUT ACCEPT [16:1070] :OUTPUT ACCEPT [9386:583359] :POSTROUTING ACCEPT [14693:1291952] -A POSTROUTING -s 10.0.3.0/24 ! -d 10.0.3.0/24 -j MASQUERADE COMMIT # Completed on Sat Oct 26 06:06:48 2013 The output of brctl show on host: $ brctl show bridge name bridge id STP enabled interfaces br0 8000.080027409684 no eth0 vethBkwWyV The output of ifconfig br0 on host: $ ifconfig br0 br0 Link encap:Ethernet HWaddr 08:00:27:40:96:84 inet addr:192.168.1.11 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::a00:27ff:fe40:9684/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:232863 errors:0 dropped:0 overruns:0 frame:0 TX packets:59518 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:34437354 (34.4 MB) TX bytes:198492871 (198.4 MB) The output of ifconfig eth0 on host: $ ifconfig eth0 eth0 Link encap:Ethernet HWaddr 08:00:27:40:96:84 inet6 addr: fe80::a00:27ff:fe40:9684/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:299419 errors:0 dropped:0 overruns:0 frame:0 TX packets:203569 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:59077446 (59.0 MB) TX bytes:372056540 (372.0 MB) The output of ifconfig eth0 on container: $ ifconfig eth0 eth0 Link encap:Ethernet HWaddr 00:16:3e:74:08:2b inet addr:192.168.1.12 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::216:3eff:fe74:82b/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:81 errors:0 dropped:0 overruns:0 frame:0 TX packets:113 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:8506 (8.5 KB) TX bytes:9021 (9.0 KB)

    Read the article

  • Connecting multiple ColdFusion 10 instances to a single Apache 2.2 server

    - by Adam Cameron
    This is on Windows 7 Home Premium edition. I have got two ColdFusion 10 (updater 2) instances: "cfusion" (the default one), and "scratch". I have got a single instance of Apache 2.2 running. Within Apache, I have set up two virtual hosts, each of which needs to be served by a different ColdFusion instance. Each of the CF instances serves files fine via Tomcat's internal web server. Apache serves vanilla HTML files fine too. So both CF instances, and both virtual hosts separately work OK. I can get wsconfig.exe to connect either one of the CF instances to the Apache server, and serve CF files via Apache & that instance. However I cannot find a way of connecting the second CF instance to Apache as well, so that both CF instances are conected, each serving one of the virtual hosts. WSConfig doesn't seem to understand the notion of "multiple CF instances", and the changes it makes to the httpd.conf (via mod_jk.conf) does not seem to be implemented in such a way as to accommodate multiple CF instances talking to a single Apache instance, or multiple virtual hosts. I freely admit to not being confident enough with how mod_jk (or even really httpd.conf) works to be able to guess if I can change stuff to make it work. If I try to add the second CF instance using WSConfig, I just get a message "the web server is already configured for ColdFusion". Be that as it may... not the instance of ColdFusion I want to connect it to! If I remove the existing connector to whichever instance is already connected, I can then connect the other one no problems. Not that this helps, but it demonstrates that the CF instance can connect to Apache. This all used to be fairly straight fwd under older versions of CF and JRun :-( The only docs I have found are on the "Connect multiple Apache virtual hosts on a web server to a single ColdFusion server" page, but that specifically only deals with a single CF instance. There is no equivalent page for multiple CF instances. I'm kinda hoping I can move some of the mod_jk config into my virtual host entries in httpd-vhosts.conf (this is how it used to work for JRun), but I've no idea what to put where. I think I've covered all the necessary info here? If not, sing out and I'll add more. Thanks. PS: tried to specifically tag this as "ColdFusion-10" as the answer will be different from previous CF versions, but it won't let me cos my rep on this site is too low (odd how it doesn't consider my rep from other S/O sites...). If someone with sufficient rep can add it, that'd be cool: it's probably a valid tag to have. Ta.

    Read the article

  • Apache ProxyPass Missing Images

    - by EpicOfChaos
    I have a apache server that sits in front of my glassfish server. mydomain.com goes directly to my static files on apache, than if you hit the subdomain forum.mydomain.com it goes to the glassfish webapp forum/ at 127.0.0.1:8080/forum/. This proxy seems to work it takes me to the web app but all of the images are missing! Here is how I go my virtual host setup. NameVirtualHost *:80 <VirtualHost *:80> ServerName www.mydomain.com ServerAlias subdomain.mydomain.com mydomain.com DocumentRoot "/usr/local/apache/htdocs" </VirtualHost> <VirtualHost *:80> ServerName forum.mydomain.com # any logging config, etc, that you need ProxyPass / http://127.0.0.1:8080/forum/ ProxyPassReverse / http://127.0.0.1:8080/forum/ </VirtualHost> And in the access log this is what I am seeing. [15/Jan/2012:03:28:02 +0000] "GET /forums/list.page HTTP/1.1" 200 12861 [15/Jan/2012:03:28:02 +0000] "GET /forum/templates/default/images/logo.jpg HTTP/1.1" 404 1075 [15/Jan/2012:03:28:02 +0000] "GET /forum/templates/default/styles/style.css?1326582403934 HTTP/1.1" 404 1075 [15/Jan/2012:03:28:02 +0000] "GET /forum/templates/default/images/icon_mini_recentTopics.gif HTTP/1.1" 404 1075 [15/Jan/2012:03:28:02 +0000] "GET /forum/templates/default/images/icon_mini_search.gif HTTP/1.1" 404 1075 [15/Jan/2012:03:28:02 +0000] "GET /forum/templates/default/images/icon_mini_members.gif HTTP/1.1" 404 1075 [15/Jan/2012:03:28:02 +0000] "GET /forum/templates/default/styles/en_US.css?1326582403934 HTTP/1.1" 404 1075 [15/Jan/2012:03:28:02 +0000] "GET /forum/templates/default/images/icon_mini_groups.gif HTTP/1.1" 404 1075 [15/Jan/2012:03:28:02 +0000] "GET /forum/templates/default/images/folder_big.gif HTTP/1.1" 404 1075 [15/Jan/2012:03:28:02 +0000] "GET /forum/templates/default/images/icon_mini_login.gif HTTP/1.1" 404 1075 [15/Jan/2012:03:28:02 +0000] "GET /forum/templates/default/images/whosonline.gif HTTP/1.1" 404 1075 [15/Jan/2012:03:28:02 +0000] "GET /forum/templates/default/images/icon_mini_register.gif HTTP/1.1" 404 1075 [15/Jan/2012:03:28:02 +0000] "GET /forum/ping_session.jsp HTTP/1.1" 404 1075 [15/Jan/2012:03:28:02 +0000] "GET /forum/templates/default/images/folder_lock.gif HTTP/1.1" 404 1075 [15/Jan/2012:03:28:02 +0000] "GET /forum/templates/default/images/folder.gif HTTP/1.1" 404 1075 [15/Jan/2012:03:28:02 +0000] "GET /forum/templates/default/images/folder_new.gif HTTP/1.1" 404 1075 Any Ideas why the images are not working?

    Read the article

  • Compiling PHP with GD crashes with EXC_BREAKPOINT (SIGTRAP) on PPC Mac

    - by Ömer
    First of all, I should say that I have searched the whole Internet for this problem but I couldn't find any solution yet. I have a Mac mini PowerPC (PPC) and I run Apache webserver (httpd-2.2.22) with PHP (5.4.0) and I do all the configure & compilation jobs by myself. If configure with: './configure' '--prefix=/usr/local/php5' '--mandir=/usr/share/man' '--infodir=/usr/share/info' '--sysconfdir=/etc' '--with-config-file-path=/etc' '--with-zlib' '--with-zlib-dir=/usr' '--with-openssl=/usr' '--without-iconv' '--enable-exif' '--enable-ftp' '--enable-mbstring' '--enable-mbregex' '--enable-sockets' '--with-mysql=/usr/local/mysql' '--with-pdo-mysql=/usr/local/mysql' '--with-mysqli=/usr/local/mysql/bin/mysql_config' '--with-apxs2=/usr/local/apache2/bin/apxs' '--with-mcrypt' then the PHP works flawlessly. But if I add the GD module by adding these to the script above: '--with-gd' '--with-jpeg-dir=/usr/local/lib' '--with-freetype-dir=/usr/X11R6' '--with-png-dir=/usr/X11R6' '--with-xpm-dir=/usr/X11R6' the PHP gets configured and compiled without any errors but it causes EXC_BREAKPOINT (SIGTRAP) (see the Crash Reporter log below) when I request a page which calls PHP module. It's obvious that something related to the GD module is causing this, probably FreeType module because it's present in the log but it may not be definite of course. When the PHP crashes (or more accurately, httpd) the CPU goes 100% for 10 to 15 seconds until it recovers. I need to use the GD module and keep the Mac mini PowerPC. So, what should I do to solve this problem? Process: httpd [79852] Path: /usr/local/apache2/bin/httpd Identifier: httpd Version: ??? (???) Code Type: PPC (Native) Parent Process: httpd [79846] Date/Time: 2013-11-04 15:44:28.444 +0200 OS Version: Mac OS X 10.5.8 (9L31a) Report Version: 6 Anonymous UUID: 0178B7F8-2241-43F7-A651-9E7234D41A37 Exception Type: EXC_BREAKPOINT (SIGTRAP) Exception Codes: 0x0000000000000001, 0x0000000093c11e0c Crashed Thread: 0 Application Specific Information: *** single-threaded process forked *** Thread 0 Crashed: 0 com.apple.CoreFoundation 0x93c11e0c __CFRunLoopFindMode + 328 1 com.apple.CoreFoundation 0x93c13d88 CFRunLoopAddSource + 276 2 com.apple.DiskArbitration 0x901a6e8c DAApprovalSessionScheduleWithRunLoop + 52 3 ...ple.CoreServices.CarbonCore 0x9512e67c _FSGetDiskArbSession(__DASession**, __DAApprovalSession**) + 540 4 ...ple.CoreServices.CarbonCore 0x9512e420 CreateDiskArbDiskForMountPath(char const*) + 84 5 ...ple.CoreServices.CarbonCore 0x9512d2c8 FSCacheableClient_GetVolumeCachedInfo(char const*, statfs const*, CachedVolumeInfo*, __DADisk*, __DADisk**) + 280 6 ...ple.CoreServices.CarbonCore 0x9512cca4 MountVolume(char const*, statfs*, unsigned char, unsigned char, __DADisk*, short*) + 352 7 ...ple.CoreServices.CarbonCore 0x9512ca48 MountInitialVolumes() + 172 8 ...ple.CoreServices.CarbonCore 0x9512c4d4 INIT_FileManager() + 164 9 ...ple.CoreServices.CarbonCore 0x9512c390 GetRetainedVolFSVCBByVolumeID(unsigned long) + 48 10 ...ple.CoreServices.CarbonCore 0x9512adf4 PathGetObjectInfo(char const*, unsigned long, unsigned long, VolumeInfo**, unsigned long*, unsigned long*, char*, unsigned long*, unsigned char*) + 184 11 ...ple.CoreServices.CarbonCore 0x9512acc4 FSPathMakeRefInternal(unsigned char const*, unsigned long, unsigned long, FSRef*, unsigned char*) + 64 12 libfreetype.6.dylib 0x0070a0fc FT_New_Face_From_Resource + 56 13 libfreetype.6.dylib 0x0070a3b0 FT_New_Face + 48 14 libphp5.so 0x0118d1a8 fontFetch + 824 15 libphp5.so 0x0118edac php_gd_gdCacheGet + 220 16 libphp5.so 0x0118d6d8 php_gd_gdImageStringFTEx + 360 17 libphp5.so 0x011763c0 php_imagettftext_common + 1504 18 libphp5.so 0x01176494 zif_imagefttext + 20 19 libphp5.so 0x014b9c68 zend_do_fcall_common_helper_SPEC + 1048 20 libphp5.so 0x01452898 _ZEND_DO_FCALL_SPEC_CONST_HANDLER + 440 21 libphp5.so 0x014ba878 execute + 776 22 libphp5.so 0x013f190c zend_execute_scripts + 316 23 libphp5.so 0x013779f4 php_execute_script + 596 24 libphp5.so 0x014bbe64 php_handler + 1972 25 httpd 0x000020c0 ap_run_handler + 96 26 httpd 0x00006ae0 ap_invoke_handler + 224 27 httpd 0x000305c4 ap_process_request + 116 28 httpd 0x0002c768 ap_process_http_connection + 104 29 httpd 0x00012d30 ap_run_process_connection + 96 30 httpd 0x00012ecc ap_process_connection + 92 31 httpd 0x000373e4 child_main + 1220 32 httpd 0x000376a8 make_child + 296 33 httpd 0x000377e4 startup_children + 100 34 httpd 0x000387d4 ap_mpm_run + 3988 35 httpd 0x0000a320 main + 3280 36 httpd 0x000019c0 start + 64

    Read the article

  • 500 Internal Server Error when setting up Apache on Ubuntu+Django

    - by ApacheQ
    I tried with Apache on ubuntu 9.04 and get the same error: Internal Server Error The server encountered an internal error or misconfiguration and was unable to complete your request. Please contact the server administrator, webmaster@localhost and inform them of the time the error occurred, and anything you might have done that may have caused the error. More information about this error may be available in the server error log. And my apache/error.log is: [Sat Oct 06 09:32:04 2012] [error] [client 10.0.64.10] ServerName: 'sapint2' [Sat Oct 06 09:32:04 2012] [error] [client 10.0.64.10] DocumentRoot: '/etc/apache2/htdocs' [Sat Oct 06 09:32:04 2012] [error] [client 10.0.64.10] URI: '/' [Sat Oct 06 09:32:04 2012] [error] [client 10.0.64.10] Location: '/' [Sat Oct 06 09:32:04 2012] [error] [client 10.0.64.10] Directory: None [Sat Oct 06 09:32:04 2012] [error] [client 10.0.64.10] Filename: '/etc/apache2/htdocs' [Sat Oct 06 09:32:04 2012] [error] [client 10.0.64.10] PathInfo: '/' [Sat Oct 06 09:32:04 2012] [error] [client 10.0.64.10] Traceback (most recent call last): [Sat Oct 06 09:32:04 2012] [error] [client 10.0.64.10] File "/usr/lib/python2.7/dist-packages/mod_python/importer.py", line 1537, in HandlerDispatch\n default=default_handler, arg=req, silent=hlist.silent) [Sat Oct 06 09:32:04 2012] [error] [client 10.0.64.10] File "/usr/lib/python2.7/dist-packages/mod_python/importer.py", line 1229, in _process_target\n result = _execute_target(config, req, object, arg) [Sat Oct 06 09:32:04 2012] [error] [client 10.0.64.10] File "/usr/lib/python2.7/dist-packages/mod_python/importer.py", line 1128, in _execute_target\n result = object(arg) [Sat Oct 06 09:32:04 2012] [error] [client 10.0.64.10] File "/usr/local/lib/python2.7/dist-packages/django/core/handlers/modpython.py", line 180, in handler\n return ModPythonHandler()(req) [Sat Oct 06 09:32:04 2012] [error] [client 10.0.64.10] File "/usr/local/lib/python2.7/dist-packages/django/core/handlers/modpython.py", line 142, in call\n self.load_middleware() [Sat Oct 06 09:32:04 2012] [error] [client 10.0.64.10] File "/usr/local/lib/python2.7/dist-packages/django/core/handlers/base.py", line 45, in load_middleware\n mod = import_module(mw_module) [Sat Oct 06 09:32:04 2012] [error] [client 10.0.64.10] File "/usr/local/lib/python2.7/dist-packages/django/utils/importlib.py", line 35, in import_module\n import(name) [Sat Oct 06 09:32:04 2012] [error] [client 10.0.64.10] File "/usr/local/lib/python2.7/dist-packages/django/contrib/sessions/middleware.py", line 4, in \n from django.utils.cache import patch_vary_headers [Sat Oct 06 09:32:04 2012] [error] [client 10.0.64.10] File "/usr/local/lib/python2.7/dist-packages/django/utils/cache.py", line 25, in \n from django.core.cache import get_cache [Sat Oct 06 09:32:04 2012] [error] [client 10.0.64.10] File "/usr/local/lib/python2.7/dist-packages/django/core/cache/init.py", line 187, in \n cache = get_cache(DEFAULT_CACHE_ALIAS) [Sat Oct 06 09:32:04 2012] [error] [client 10.0.64.10] File "/usr/local/lib/python2.7/dist-packages/django/core/cache/init.py", line 179, in get_cache\n cache = backend_cls(location, params) [Sat Oct 06 09:32:04 2012] [error] [client 10.0.64.10] File "/usr/local/lib/python2.7/dist-packages/django/core/cache/backends/memcached.py", line 139, in init\n "Memcached cache backend requires either the 'memcache' or 'cmemcache' library" [Sat Oct 06 09:32:04 2012] [error] [client 10.0.64.10] InvalidCacheBackendError: Memcached cache backend requires either the 'memcache' or 'cmemcache' library [Sat Oct 06 09:51:30 2012] [notice] caught SIGTERM, shutting down [Sat Oct 06 09:51:31 2012] [notice] mod_python: Creating 8 session mutexes based on 150 max processes and 0 max threads. [Sat Oct 06 09:51:31 2012] [notice] mod_python: using mutex_directory /tmp [Sat Oct 06 09:51:31 2012] [notice] Apache/2.2.17 (Ubuntu) PHP/5.3.5-1ubuntu7.11 with Suhosin-Patch mod_python/3.3.1 Python/2.7.1+ mod_wsgi/3.3 configured -- resuming normal operations I need some help Thanks

    Read the article

  • Powershell: Cannot connect via SSL

    - by JSWork
    Am following "secrets to powershell remoting" to setup an SLL account and seem to be missing a step. I ran Winrm create winrm/config/Listener?Address=*+Transport=HTTPS @{Hostname="redacted";CertificateThumbprint="redacted"} and got PS WSMan:\localhost&gt; dir wsman:\localhost\listener\Listener_1184937132 WSManConfig: Microsoft.WSMan.Management\WSMan::localhost\Listener\Listener_1184937132 Name Value Type ---- ----- ---- Address * System.String Transport HTTP System.String Port 5985 System.String Hostname System.String Enabled true System.String URLPrefix wsman System.String CertificateThumbprint System.String ListeningOn_756355952 10.0.0.54 System.String ListeningOn_1201550598 127.0.0.1 System.String PS WSMan:\localhost&gt; dir wsman:\localhost\listener\Listener_1187163138 WSManConfig: Microsoft.WSMan.Management\WSMan::localhost\Listener\Listener_1187163138 Name Value Type ---- ----- ---- Address * System.String Transport HTTP System.String Port 80 System.String Hostname System.String Enabled true System.String URLPrefix wsman System.String CertificateThumbprint System.String ListeningOn_756355952 10.0.0.54 System.String ListeningOn_1201550598 127.0.0.1 System.String PS WSMan:\localhost&gt; dir wsman:\localhost\listener\Listener_220862350 WSManConfig: Microsoft.WSMan.Management\WSMan::localhost\Listener\Listener_220862350 Name Value Type ---- ----- ---- Address * System.String Transport HTTPS System.String Port 5986 System.String Hostname redacted System.String Enabled true System.String URLPrefix wsman System.String CertificateThumbprint redacted System.String ListeningOn_756355952 10.0.0.54 System.String ListeningOn_1201550598 127.0.0.1 System.String Trouble is when i do this PS C:\Users\redacted> enter-pssession -Computername redacted -Credential redacted\redacted -UseSSL I get this Enter-PSSession : Connecting to remote server failed with the following error message : The client cannot connect to th e destination specified in the request. Verify that the service on the destination is running and is accepting requests . Consult the logs and documentation for the WS-Management service running on the destination, most commonly IIS or Win RM. If the destination is the WinRM service, run the following command on the destination to analyze and configure the WinRM service: "winrm quickconfig". For more information, see the about_Remote_Troubleshooting Help topic. At line:1 char:16 + enter-pssession <<<< -Computername redacted -Credential redacted\redacted -UseSSL + CategoryInfo : InvalidArgument: (redacted:String) [Enter-PSSession], PSRemotingTransportException + FullyQualifiedErrorId : CreateRemoteRunspaceFailed This happens even when the firewall is off completely and when the machine tires to connect to itself locally. On top of that, despite the listners eing lsited on wsman, when I run PS WSMan:\localhost&gt; Get-PSSessionConfiguration I get Name PSVersion StartupScript Permission ---- --------- ------------- ---------- Microsoft.PowerShell 2.0 PS WSMan:\localhost&gt; Any ideas what I'm missing/doing wrong? edit: Windows 2003. Powershell v2.0

    Read the article

  • Explanation of the init.d/scripts Fedora

    - by Shahmir Javaid
    Below is a copy of vsftpd, i need some explanations of some of the scripts mentioned below in this script: #!/bin/bash # ### BEGIN INIT INFO # Provides: vsftpd # Required-Start: $local_fs $network $named $remote_fs $syslog # Required-Stop: $local_fs $network $named $remote_fs $syslog # Short-Description: Very Secure Ftp Daemon # Description: vsftpd is a Very Secure FTP daemon. It was written completely from # scratch ### END INIT INFO # vsftpd This shell script takes care of starting and stopping # standalone vsftpd. # # chkconfig: - 60 50 # description: Vsftpd is a ftp daemon, which is the program \ # that answers incoming ftp service requests. # processname: vsftpd # config: /etc/vsftpd/vsftpd.conf # Source function library. . /etc/rc.d/init.d/functions # Source networking configuration. . /etc/sysconfig/network RETVAL=0 prog="vsftpd" start() { # Start daemons. # Check that networking is up. [ ${NETWORKING} = "no" ] && exit 1 [ -x /usr/sbin/vsftpd ] || exit 1 if [ -d /etc/vsftpd ] ; then CONFS=`ls /etc/vsftpd/*.conf 2>/dev/null` [ -z "$CONFS" ] && exit 6 for i in $CONFS; do site=`basename $i .conf` echo -n $"Starting $prog for $site: " daemon /usr/sbin/vsftpd $i RETVAL=$? echo if [ $RETVAL -eq 0 ]; then touch /var/lock/subsys/$prog break else if [ -f /var/lock/subsys/$prog ]; then RETVAL=0 break fi fi done else RETVAL=1 fi return $RETVAL } stop() { # Stop daemons. echo -n $"Shutting down $prog: " killproc $prog RETVAL=$? echo [ $RETVAL -eq 0 ] && rm -f /var/lock/subsys/$prog return $RETVAL } # See how we were called. case "$1" in start) start ;; stop) stop ;; restart|reload) stop start RETVAL=$? ;; condrestart|try-restart|force-reload) if [ -f /var/lock/subsys/$prog ]; then stop start RETVAL=$? fi ;; status) status $prog RETVAL=$? ;; *) echo $"Usage: $0 {start|stop|restart|try-restart|force-reload|status}" exit 1 esac exit $RETVAL Question I What the hell is the difference between the && and || signs in the below commands, and is it just an easy way to do a simple if check or is it completely different to a if[..something..]; then ..something.. fi: # Check that networking is up. [ ${NETWORKING} = "no" ] && exit 1 [ -x /usr/sbin/vsftpd ] || exit 1 Question II i get what -eq and -gt is (equal to, greater than) but is there a simple website that explains what -x, -d and -f are? Any help would be apreciated Running Fedora 12 on my OS. Script copied from /etc/init.d/vsftpd Question III It says required starts are $local_fs $network $named $remote_fs $syslog but i cant see any where it checks for those.

    Read the article

< Previous Page | 371 372 373 374 375 376 377 378 379 380 381 382  | Next Page >