Search Results

Search found 59804 results on 2393 pages for 'windows xp professional'.

Page 376/2393 | < Previous Page | 372 373 374 375 376 377 378 379 380 381 382 383  | Next Page >

• Home Network Stopped Working

  - by James

  I have a home network where a machine running Windows 7 Ultimate N acts as a central hub for other devices to access media. This has been running for around 2 years now and there has been no recent configuration changes. The machine has a static IP address (192.168.0.3), which also has not been changed. A few laptops, Sonos music system and mobiles are using the machine for music/video mostly. Additionally, post 3389 was also open for RDP. I used a no-ip agent to map a hostname so I could RDP to the machine from the internet. As of yesterday when I try to ping the machine, I get PING:Transmit Failed, General Error I noticed however, the IP it is pinging is 0.0.2.233. All shares etc are no longer functioning including RDP. On the machine itself, an IP config shows like nothing has changed. It still shows the expected IP. If I ping itself from its hostname, I get the same error as above. machine has been rebooted, the router has been also. Any ideas where to even start on this?

  Read the article

• Local user vs. domain user? What is the right way here?

  - by ebeeb

  I'm a software developer in a company with 6 employees. Everyone has a machine for him-/herself, so none of the machines is shared. I'm currently setting up my machine with Windows 8 and was experimenting a bit with domain and local user accounts. Correct me please if I'm wrong, but I think the idea behind is, that domain users generally should not be able to modify the configuration of a machine (like installing software), since they are able to login on every single machine in the domain. The local user (usually just one local administrator per machine) is the one who cares about the configuration of the machine. But in my case the login into the domain is just for being able to access directories/servers in the domain (I do not really know the details, all I know is, that loggin into the domain user account is necessary). So overall I've got a local admin account and a domain account used on my machine. While working I'm logged in to my domain user account. But it annoys me, that I always need to enter the credentials of my local user account when I'm about to update/install something, which happens quite often as a software developer. I fixed this with adding the domain account into the user accounts in my control panel and putting it into the Administrators group. The only thing I wanted to know about this: is there something REALLY bad about doing this? Or is there maybe a more common way to be able to act like a local admin, while logged in as a domain user? PS: I'm sorry about the tags, but I don't know the proper ones. I'd be glad if some of the superuser experts could fix this :-)

  Read the article

• Cloning to a smaller hard drive with DDRescue

  - by krebshack

  I am currently working with a 700 GB Seagate hard drive that's beginning to fail. I'll call this "SDB" from now on. I'd like to clone it while I'm still able to. However, the only hard drive that I have available is a 500 GB WD hard drive. I'll call this "SDC" from now on. The partition scheme on SDB is as follows: 9.77 GB is allocated to a recovery partition and the remaining 688.87 GB is allocated to a Windows partition. Both are formatted using NTFS. There is no partition scheme on SDC. I know how to clone one hard drive to another using DDRescue but I've only done it using hard drives that are the same size. For your reference, I'll normally use the command "ddrescue -v -r 3 /dev/sdb /dev/sdc example.log". I'd like to know if it's possible to do this with DDRescue. I've read the manual from GNU (http://www.gnu.org/software/ddrescue/manual/ddrescue_manual.html) and I haven't seen anything indicating that it is possible. I'm just looking for some confirmation that this is a correct impression. If it's not possible, then it would be helpful if any of y'all would be able to make some work around suggestions. But please don't feel obligated to do that. I don't want to have my one thread bogged down with two many questions.

  Read the article

• Logging Remote Server Access via Remote Desktop

  - by Nate Bross

  The objective here is to start a simple .NET application I've written which captures some environment variables (time, username, computername, etc) upon login. This .NET application subscribes to the Windows "User logout" event. Upon launch, the application captures the above variables, and creates a record in my database, upon logout (which I'm capturing) I update another field in the same record, with the logout time. The above is working exactly as I would like, when I launch the binary, it makes its initial log entry, then waits for the logout event and updates the same record. Restrictions, the .NET binary should be able to live on a share point (\server\share\myapp\v1) so I can update the application to (\server\share\myapp\v2) and simply update the GPO/Logon script. My initial thought was to use the \domaincontroller\sysvol\ directory to store the binary and then update all user accounts to include a call to my application. Can you see any flaws in this approach? My question is this: First, is there anything wrong with my idea above? Second, if so, what is the best way (through group policy or otherwise) to ensure this application launches whenever a session is started on a server?

  Read the article

• Microsoft Server 2003 Explorer shows duplicate local shares

  - by user52167

  Hi folks, I am new here and I could really use some advice please. I am having a problem with our file server. When I try to browse the shared folders using explorer, several of the shared folders all appear to have the same name. Whenever I attempt to rename one of the affected folders, all the affected folders name also change. Our File Server is Windows Server 2003 R2. I am logged on directly to the server using remote desktop. When I open the folder all is as it should be, the proper content is there and the address bar displays the correct folder name and path. The share names are correct, so everything that needs to access the shared folder/files can do so. Also when I browse to the folder using the command-line all it as it should be there too. The only issue seems to be the incorrect display name when browsing using explorer. Can anyone offer any advice or help as to how to resolve this issue please? It would be most appreciated. Thanks

  Read the article

• Logging Remote Desktop to Servers via Logon Script or GPO or What?

  - by Nate Bross

  The objective here is to start a simple .NET application I've written which captures some environment variables (time, username, computername, etc) upon login. This .NET application subscribes to the Windows "User logout" event. Upon launch, the application captures the above variables, and creates a record in my database, upon logout (which I'm capturing) I update another field in the same record, with the logout time. The above is working exactly as I would like, when I launch the binary, it makes its initial log entry, then waits for the logout event and updates the same record. Restrictions, the .NET binary should be able to live on a share point (\server\share\myapp\v1) so I can update the application to (\server\share\myapp\v2) and simply update the GPO/Logon script. My initial thought was to use the \domaincontroller\sysvol\ directory to store the binary and then update all user accounts to include a call to my application. Can you see any flaws in this approach? My question is this: First, is there anything wrong with my idea above? Second, if so, what is the best way (through group policy or otherwise) to ensure this application launches whenever a session is started on a server?

  Read the article

• Can I select which folders the Photos live tile chooses from?

  - by nhinkle

  The built-in Photos app in Windows 8 has a live tile on the start screen that shows photos from your pictures library. It's a cool little visual, even if it's not particularly useful. The problem is that a lot of image files on my computer are not really photos per se -- I have a lot of screenshots, PNGs of technical drawings, graph images, etc. Those all look pretty awkward on the start screen. I look pretty awkward on the start screen too... sometimes photos like resume profile shots show up that I don't want to delete, but they're not really what I want to be staring at when I start my computer up. I'm looking for some way to configure which folders the Photos app should look in for images to display on the live tile. That way, I could point it to some directories of pretty scenic pictures I've taken, and not have to see graphs and my own mug. For the time being, I've just disabled the live tile (right click - disable live tile), but I would ultimately like to have this functionality, just with more control over it.

  Read the article

• Default sending all mails from the one account on Outlook 2007

  - by user45774

  I have two email accounts configured on my outlook 2007. One account is connecting to my exchange server which is the default I have another account connecting to my gmail. I want to by default send or reply all the emails that I receive on my gmail account through my exchange server account only. When I try replying to the email that I receive from the gmail account it gets defaulted to the same (gmail account). I need to manually change it to exchange server account. I want that to be changed to exchange server account by default for all the mails that I send or reply to. I don't want to do the manual process mentioned below in steps: Step 1: In the message window, click Account. Step 2: Click the account that you want to use. Is there a way to set the exchange server account for sending and replying to all emails on outlook irrespective of the number of accounts that I have on outlook. I have my outlook installed on a windows 2003 server.

  Read the article

• Folder with files shows as empty

  - by ProfKaos

  Last night I create a new project in Visual Studio 2010, in the folder c:\development\hobby\devices. When I navigate to that folder in a new instance of Windows Explorer, I get the 'This folder is empty.' message in the files pane. If I then, from within Visual Studio, issue the "Open containing folder command", explorer opens to the folder c:\development\hobby\devices\LoopBack, where loopback is a project under the main folder. If I paste that path into another new instance of explorer, explorer correctly opens c:\development\hobby\devices. How is this possible? SOLVED: This is what comes of typing paths instead of selecting them. Some elementary detective work yielded the following interesting results: C:\>dir dev*. Volume in drive C is OS Volume Serial Number is E4B4-0563 Directory of C:\ 2010/11/28 09:20 PM <DIR> Development 2010/12/01 08:57 PM <DIR> Develpment 2010/11/02 06:31 PM <DIR> DevTools 0 File(s) 0 bytes 3 Dir(s) 63 965 368 320 bytes free Where my disappearing project was in the badly spelt one.

  Read the article

• Virtual machine shows no network adapter

  - by Logman

  I had a an old Lotus/Domino server (R5), I just virtualized. It ran Windows 2000 server. I had to use Vmware Converter v3.x to create the vm because it was the only one I could find that could actually do a Win2k machine that had no service packs. It was just put out to pasture a couple months ago, so it isn't being used except to store the old email for archiving. It took a bit of work to get it onto the Win2008R2 servers hyper-v but I got it there. Problem now, is that the network adapter didn't show up. I could not install the guest additions because it needed sp4 + on win2k... so I installed sp4 onto the vm guest. Everything seems fine except the network adapter still isn;t showing up in device manager. NOthing. Now this server had an external ip, and I did not want it to be put onto the internal virtual network. I am going to use a dedicated adapter on the host (hyper-v server) if that matters... but this shouldn't matter if the the guests network adapter doesn't show at all. Thoughts?

  Read the article

• Memory Usage by Mapped Files (Win7 64Bit)

  - by Dexter

  When copying files from/to my external USB3 HDD memory usage in Win7 goes up to 100% and remains there. I'm not sure whether this is a problem caused by faulty drivers or not, but I already have the current version of them (Etron USB3 controller on a Gigabyte 990fxa board).. Using RAMMap it becomes obvious that the files, that are to be copied, are mapped into memory. Clicking on Empty > Empty System Working Set seems to temporarily fix the problem (without causing any trouble with the file copy process), but it needs to be done every few seconds. Is there any way to schedule this operation to happen ever 10 or so seconds on its own? What underlying system command is RAMMap using? Or, alternatively, is there any way to limit how much RAM mapped files may use in Windows 7? I know mapped files would usually be removed from memory if other programs need the memmory, but while memmory usage is at 100% the system starts freezing up for half a second or so everytime I click anything .. thus the automatic removal of unused memory contents seems to be failing here.

  Read the article

• Provide a user with service start/stop permissions

  - by slakr007

  I have a very basic domain that I use for development. I want to create a GPO that provides users in the Backup Operators group with start/stop permissions for two specific services on a specific server. I have read several articles about this, and they all indicate that this is very easy. Create a GPO, give the user start/stop permissions to the services under Computer Configuration Policies Windows Settings Security Settings System Services, and voila. Done. Not so much, but I have to be doing something wrong. My install is pretty much the default. The domain controller is in the Domain Controllers OU, the Backup Operators group is under Builtin, and I created a user called Backup under Users. I created a GPO and linked it to the Domain Controllers OU. In the GPO I give the Backup user permission to start/stop two specific services on the server. I forced an update with gpupdate. I used Group Policy Results to verify that my GPO is the winning GPO giving the user the permission to start/stop the two services. However, the user is still unable to start/stop the services. I attempted different loopback settings on the GPO to no avail. I'm sort of at a loss here.

  Read the article

• Using Nortel Netdirect on Windows 7 64bit

  - by Matt Lewis

  Does anyone know how to use Nortel Netdirect (Version 7.1.3.0) with Windows 7 64 bit (Home Premium)? There are several ways available to me for connecting, all of which work for me on a 32-bit XP machine: Nortel Contivity VPN client (v6_02.022). The installer appears to be 16-bit, so I can't even install it on a 64-bit machine. Web-based SSL via IE Web-based SSL via Firefox The Web-based SSL process is supposed to load Netdirect and start it up, establishing the VPN connection. Using Firefox, I'm able to authenticate with my smartcard, but when it tries to download the applet, the process stops with a message box saying that it couldn't download the zip file. If I run Firefox in Vista compatibility mode, it gets a little farther, and manages to start Netdirect, but then exits after notifying me that the netdirect adapter was not installed. Using IE, I'm able to authenticate with my smartcard, then the java applet starts, but dies with the following sent to the java console: load: class NetDirect not found. java.lang.ClassNotFoundException: NetDirect at sun.plugin2.applet.Applet2ClassLoader.findClass(Unknown Source) at java.lang.ClassLoader.loadClass(Unknown Source) at java.lang.ClassLoader.loadClass(Unknown Source) at sun.plugin2.applet.Plugin2ClassLoader.loadCode(Unknown Source) at sun.plugin2.applet.Plugin2Manager.createApplet(Unknown Source) at sun.plugin2.applet.Plugin2Manager$AppletExecutionRunnable.run(Unknown Source) at java.lang.Thread.run(Unknown Source) Caused by: javax.net.ssl.SSLHandshakeException: Received fatal alert: unknown_ca at com.sun.net.ssl.internal.ssl.Alerts.getSSLException(Unknown Source) at com.sun.net.ssl.internal.ssl.Alerts.getSSLException(Unknown Source) at com.sun.net.ssl.internal.ssl.SSLSocketImpl.recvAlert(Unknown Source) at com.sun.net.ssl.internal.ssl.SSLSocketImpl.readRecord(Unknown Source) at com.sun.net.ssl.internal.ssl.SSLSocketImpl.performInitialHandshake(Unknown Source) at com.sun.net.ssl.internal.ssl.SSLSocketImpl.startHandshake(Unknown Source) at com.sun.net.ssl.internal.ssl.SSLSocketImpl.startHandshake(Unknown Source) at sun.net.www.protocol.https.HttpsClient.afterConnect(Unknown Source) at sun.net.www.protocol.https.AbstractDelegateHttpsURLConnection.connect(Unknown Source) at sun.net.www.protocol.http.HttpURLConnection.getInputStream(Unknown Source) at java.net.HttpURLConnection.getResponseCode(Unknown Source) at sun.net.www.protocol.https.HttpsURLConnectionImpl.getResponseCode(Unknown Source) at sun.plugin2.applet.Applet2ClassLoader.getBytes(Unknown Source) at sun.plugin2.applet.Applet2ClassLoader.access$000(Unknown Source) at sun.plugin2.applet.Applet2ClassLoader$1.run(Unknown Source) at java.security.AccessController.doPrivileged(Native Method) ... 7 more Exception: java.lang.ClassNotFoundException: NetDirect I've tried installing certificates using java's keytool, but that didn't change the outcome.

  Read the article

• Limiting bandwith on an Windows 7 machine

  - by Mihai Damian

  I need to limit the bandwidth on my Windows 7 x64 machine. In the past (on XP) I've been able to use NetLimiter for similar tasks. However for some reason I can't get it to work anymore. For lower limits the bandwidth tests are able to exceed the limit by 10-50%; higher limits seem to be ignored completely and the bandwidth tests report download speeds of over 10 times the speed I set. I'm using speedtest.net and some similar service from my ISP for these tests. Anyway, I don't necessarily need a program as complex as NetLimiter since I only need to throttle my machine's bandwidth, not a specific program's. In case you are wondering why in the world I'd want to cripple my Internet speed, there is a funny story behind this. Long story short, my modem gets random disconnects. Tech support comes in, says my Internet speed is abnormally high and I must be using some tools to somehow make it go faster than it's supposed to and this messes up my modem. I check the connection with another computer and it seems that my PC is the only one in my network that gets abnormal speeds. I reinstall my OS, speed looks normal at first, after I install the batch of 50 or so updates, it goes back to abnormally high speeds and the disconnect problems are not solved. Now I don't have a clue if the explanation the tech team gave me was just a strategy to lay the blame on someone else, but I was trying to give them the benefit of the doubt and see what happens if I really reduce my speed to their specification. Any help appreciated.

  Read the article

• No LPT port in Windows 7 virtual machines

  - by KeyboardMonkey

  Windows 7 has MS virtual PC integrated, the VM settings don't give a parallel LPT port mapping to the physical machine. Where did it go? Has anyone else noticed this, and found a solution? Update: After much digging, I found the one and only reference to this issue, on the VPC Blog: "Parallel port devices are not supported, as they are relatively rare today." -More details- It's a XP VM I've been using since VPC 2007 days, which did have this functionality. This is to configure barcode printers via the LPT port. Since the (new) MS VM can't map to my physical LPT port, I'm having a hard time configuring printers. My physical ports are enabled in the BIOS. It has worked the past 3 years, before switching to Win 7. Any help is appreciated. This screen shot of the VM settings shows COM ports, but LPT is no more In contrast, here is a screen shot of VPC 2007 (before it got integrated into Win 7). Notice how it has LPT support

  Read the article

• Mysterious Windows 7 slowdown problem

  - by cletus

  I have a fairly beefy machine: Intel Q9450 8GB DDR2800 (4x2) Intel X25-M G2 80GB SSD Several other hard drives Windows 7 Ultimate 64 In the last month I've gotten a mysterious slowdown problem. When I start my IDE (IntelliJ IDEA) it usually takes about 20 seconds on the SSD. If my machine has been on for a day or two (as far as I can tell this is the only pattern) and I try to start the IDE, it brings my machine to a halt. CPU usage goes up to 25% per core (so it's basically 100% usage) and it takes up to 5 minutes to start. Other things I've noticed: iTunes will start to skip and stutter (my music is running off a second hard drive). The only persistent things I'm running are: AVG Anti-Virus Spybot (the slowdown predates this) Hamachi and Murmur (again the slowdown predates this) Apple Airport Base Agent HP OfficeJet 8500 driver/manager The browser I use is Chrome. I can't think why that'd be relevant but it's always on so I thought I'd mention it. When this happens I can't see a reason for it in the process list. No CPU hogs. No spikes in IO activity that I can see. Basically I'm at a loss to explain it and need to reboot, at which point everything returns to normal (for awhile). FWIW the Intel SSD is about 75-80% full. I know being too full can really degrade performance. I don't believe that's the issue here. Does anyone have any ideas on what I can do to fix this or at least help find what's going wrong? This same machine (sans SSD) could run Win XP and stay up fine for a month or two.

  Read the article

• Windows 7 remote desktop encryption error every few minutes

  - by rfrankel

  Because of an error in data encryption, this session will now end. This is the error I've been getting more and more frequently over the past few days, to the point that I can't ignore it because it's happening consistently within 5 minutes of connecting - sometimes within a few seconds. Both the remote and local machines are Windows 7 Pro x64. The remote machine is behind a Linksys RV082, and I'm using UPnP to forward a remote port to the correct local port. This setup had been working fine for several months, and I can't think of any recent relevant changes that might have been made. Things I've already tried: Disabling unnecessary components of the network connection on the remote machine, until only IPv4 and Client for Microsoft Networks remain. Disabling TCP large send offload on both the remote and local machines. Confirming that the remote machine is not mentioned anywhere in any DMZ settings on the Linksys router. Confirming that there are no x509-related registry keys screwing things up (this is the suggested fix for a slightly different error anyway). These are the only solutions I've been able to find after about an hour of searching, and most of them apply to XP or Server 2003 in any case. If anyone could suggest something else, it would be much appreciated.

  Read the article

• Limiting bandwith on an Windows 7 machine

  - by Mihai Damian

  I need to limit the bandwidth on my Windows 7 x64 machine. In the past (on XP) I've been able to use NetLimiter for similar tasks. However for some reason I can't get it to work anymore. For lower limits the bandwidth tests are able to exceed the limit by 10-50%; higher limits seem to be ignored completely and the bandwidth tests report download speeds of over 10 times the speed I set. I'm using speedtest.net and some similar service from my ISP for these tests. Anyway, I don't necessarily need a program as complex as NetLimiter since I only need to throttle my machine's bandwidth, not a specific program's. In case you are wondering why in the world I'd want to cripple my Internet speed, there is a funny story behind this. Long story short, my modem gets random disconnects. Tech support comes in, says my Internet speed is abnormally high and I must be using some tools to somehow make it go faster than it's supposed to and this messes up my modem. I check the connection with another computer and it seems that my PC is the only one in my network that gets abnormal speeds. I reinstall my OS, speed looks normal at first, after I install the batch of 50 or so updates, it goes back to abnormally high speeds and the disconnect problems are not solved. Now I don't have a clue if the explanation the tech team gave me was just a strategy to lay the blame on someone else, but I was trying to give them the benefit of the doubt and see what happens if I really reduce my speed to their specification. Any help appreciated.

  Read the article

• ownership of hard drive recoveery of files Windows 7

  - by Jeff

  Here is the issue. I have an old laptop that died that was running xp. I now have a win 7 laptop. I need to get the files off the old drive. Win 7 will not let me take ownership of the drive. I can runn the comand prompt in regular mode and do a dir on the drive that shows up as Q: drive in regular mode. I gives me the volume as c and the serial number. I can not take ownership in regular mode with the comand prompt or other means. Microsoft site says use safe mode with networking. So I go to safe mode the drive shows up as G: in safe mode. I use the comand prompt Takeown /f G: and get the device is not ready error. I am at a loss. All I want is to retrieve my files from this drive. Any ideas or sugestions. I don't see how you can dir and get some info in one mode and not acces it in another. I have to get ownership and permissions fixed to get in the drive to get my files. Thanks in advance. I might add that I am using a usb3.0 to ide/sata cable adapter. Software came with the device but I can't make heads or tails out of the manual to know if any of the software can help me. The soft ware is PCClone Ex lite, and Clone Drive Soft ware

  Read the article

• No access to Windows 2003 admin shares

  - by ARomo

  This is the environment: Several Win 2003 SP 2 servers and several Win XP SP2 & SP3 clients. All in the same LAN. Firewall is disabled everywhere. No recent Windows updates or configuration changes. This is the problem: Since last Thursday, I log on to any other server or workstation as any regular (non-admin) user and I fail to be able to open ADMIN SHARES ONLY (namely \\server1\c$, \\server1\e$ and \\server1\admin$). The error message is: "\server1\c$ is not accessible. You might not have permission to use this network resource. Contact the administrator of this server to find out if you have access permissions. Multiple connections to a server or shared resource by the same user, using more than one user name, are not allowed. Disconnect all previous connections to the server or shared resource and try again." I can, however, open the same shares if I use FQDN or IP address: \\server1.domain.local\c$ \\172.0.0.1\c$ Other shares do not have this issue and I can open them without any issue. Any ideas or suggestion would be truly appreciated. Thank you in advance.

  Read the article

• Upcoming presentations by me at Windows Azure Events

  - by ScottGu

  I recently blogged about a big wave of improvements we recently released for Windows Azure.  I also delivered a keynote on June 7th that discussed and demoed the enhancements – you can watch a recorded version of it online. Over the next few weeks I’ll be doing several more speaking events about Windows Azure in North America and Europe.  Below are details on some of the upcoming the events and how you can sign-up to attend one in person: Scottsdale, Arizona on June 19th, 2012 Attend this FREE all-day event in Scottsdale, Arizona on Tuesday, June 19th to learn more about Windows Azure, ASP.NET, Web API and SignalR.  I’ll be doing a 2 hour presentation on Windows Azure, followed by Scott Hanselman on ASP.NET and Web API, and Brady Gaster on SignalR.  Learn more about the event and register to attend here. Cambridge, United Kingdom on June 21st, 2012 Attend this FREE two-hour event in Cambridge (UK) the evening of Thursday, June 21st.  I’ll be covering the new Windows Azure release – expects lots of demos and audience participation. Learn more about the event and register to attend here. London, United Kingdom on June 22nd, 2012 Attend the FREE all-day Microsoft Cloud Day conference in London (UK) on Friday, June 22nd to learn about Windows Azure and Windows 8.  I’ll be kicking off the event with a two hour keynote, and will be followed by some other fantastic speakers. Learn more about the conference and register to attend here. TechEd Europe in Amsterdam, Netherlands on June 26th, 2012 I’ll be at TechEd Europe this year where I’ll be presenting on Windows Azure.  I’ll be in the general session keynote and also have a foundation track session on Windows Azure on Tuesday, June 26th. Learn more about TechEd Europe and register to attend here. Amsterdam, Netherlands on June 26th, 2012 Not attending TechEd Europe but near Amsterdam and still want to see me talk?  The good news is that the leaders of the Windows Azure User Group NL have setup a FREE event during the evening of Tuesday, June 26th where I’ll be presenting along with Clemens Vasters. Learn more about the event and register to attend here. Dallas, Texas on July 10th, 2012 I’ll be in Dallas, Texas on Tuesday, July 10th and presenting at a FREE all day Microsoft Cloud Summit.  I’ll kick off the day with a keynote, which will be followed by a great set of additional Windows Azure talks as well as a “Grill the Gu” Q&A session with me over lunch. Learn more about the event and register to attend here. Additional Events I’ll be doing many more events and talks in the months ahead – I’ll blog details of additional conferences/events I’m doing as they are fixed. Hope to see some of you at the above ones! Scott

  Read the article

• Tip on Reusing Classes in Different .NET Project Types

  - by psheriff

  All of us have class libraries that we developed for use in our projects. When you create a .NET Class Library project with many classes, you can use that DLL in ASP.NET, Windows Forms and WPF applications. However, for Silverlight and Windows Phone, these .NET Class Libraries cannot be used. The reason is Silverlight and Windows Phone both use a scaled down version of .NET and thus do not have access to the full .NET framework class library. However, there are many classes and functionality that will work in the full .NET and in the scaled down versions that Silverlight and Windows Phone use.Let’s take an example of a class that you might want to use in all of the above mentioned projects. The code listing shown below might be something that you have in a Windows Form or an ASP.NET application. public class StringCommon{  public static bool IsAllLowerCase(string value)  {    return new Regex(@"^([^A-Z])+$").IsMatch(value);  }   public static bool IsAllUpperCase(string value)  {    return new Regex(@"^([^a-z])+$").IsMatch(value);  }} The StringCommon class is very simple with just two methods, but you know that the System.Text.RegularExpressions namespace is available in Silverlight and Windows Phone. Thus, you know that you may reuse this class in your Silverlight and Windows Phone projects. Here is the problem: if you create a Silverlight Class Library project and you right-click on that project in Solution Explorer and choose Add | Add Existing Item… from the menu, the class file StringCommon.cs will be copied from the original location and placed into the Silverlight Class Library project. You now have two files with the same code. If you want to change the code you will now need to change it in two places! This is a maintenance nightmare that you have just created. If you then add this to a Windows Phone Class Library project, you now have three places you need to modify the code! Add As LinkInstead of creating three separate copies of the same class file, you want to leave the original class file in its original location and just create a link to that file from the Silverlight and Windows Phone class libraries. Visual Studio will allow you to do this, but you need to do one additional step in the Add Existing Item dialog (see Figure 1). You will still right mouse click on the project and choose Add | Add Existing Item… from the menu. You will still highlight the file you want to add to your project, but DO NOT click on the Add button. Instead click on the drop down portion of the Add button and choose the “Add As Link” menu item. This will now create a link to the file on disk and will not copy the file into your new project. Figure 1: Add as Link will create a link, not copy the file over. When this linked file is added to your project, there will be a different icon next to that file in the Solution Explorer window. This icon signifies that this is a link to a file in another folder on your hard drive.   Figure 2: The Linked file will have a different icon to show it is a link. Of course, if you have code that will not work in Silverlight or Windows Phone -- because the code has dependencies on features of .NET that are not supported on those platforms – you  can always wrap conditional compilation code around the offending code so it will be removed when compiled in those class libraries. SummaryIn this short blog entry you learned how to reuse one of your class libraries from ASP.NET, Windows Forms or WPF applications in your Silverlight or Windows Phone class libraries. You can do this without creating a maintenance nightmare by using the “Add a Link” feature of the Add Existing Item dialog. Good Luck with your Coding,Paul Sheriff ** SPECIAL OFFER FOR MY BLOG READERS **Visit http://www.pdsa.com/Event/Blog for a free video on Silverlight entitled Silverlight XAML for the Complete Novice - Part 1.

  Read the article

• SQL Server 2008 R2 Enterprise won't install on Windows 2008 R2 Enterprise

  - by Carlos Paulino

  I've been trying to install SQL Server on a new Windows Server 2008. I have tried everything but I haven't been able to narrow down the problem. When the installation fails I get " Exit code (Decimal): -2068643839". The problem with this is that according to Microsoft this is a generic error code. I follow their guide to look into the detail.txt inside C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\ But I can't find something that specifies the exact error. Any suggestions ? Thanks in advanced. I uploaded to detail.txt to http://www.megaupload.com/?d=0MV46SZH because it is to big to paste here. Below is the summary.txt ---------- Overall summary: Final result: SQL Server installation failed. To continue, investigate the reason for the failure, correct the problem, uninstall SQL Server, and then rerun SQL Server Setup. Exit code (Decimal): -2068643839 Exit facility code: 1203 Exit error code: 1 Exit message: SQL Server installation failed. To continue, investigate the reason for the failure, correct the problem, uninstall SQL Server, and then rerun SQL Server Setup. Start time: 2011-02-28 11:29:56 End time: 2011-02-28 11:34:45 Requested action: Install Machine Properties: Machine name: SA-SERVER Machine processor count: 8 OS version: Windows Server 2008 R2 OS service pack: Service Pack 1 OS region: United States OS language: English (United States) OS architecture: x64 Process architecture: 64 Bit OS clustered: No Product features discovered: Product Instance Instance ID Feature Language Edition Version Clustered Package properties: Description: SQL Server Database Services 2008 R2 ProductName: SQL Server 2008 R2 Type: RTM Version: 10 SPLevel: 0 Installation location: F:\x64\setup\ Installation edition: ENTERPRISE User Input Settings: ACTION: Install ADDCURRENTUSERASSQLADMIN: True AGTSVCACCOUNT: NT AUTHORITY\SYSTEM AGTSVCPASSWORD: ***** AGTSVCSTARTUPTYPE: Manual ASBACKUPDIR: Backup ASCOLLATION: Latin1_General_CI_AS ASCONFIGDIR: Config ASDATADIR: Data ASDOMAINGROUP: <empty> ASLOGDIR: Log ASPROVIDERMSOLAP: 1 ASSVCACCOUNT: <empty> ASSVCPASSWORD: ***** ASSVCSTARTUPTYPE: Automatic ASSYSADMINACCOUNTS: <empty> ASTEMPDIR: Temp BROWSERSVCSTARTUPTYPE: Disabled CONFIGURATIONFILE: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20110228_112601\ConfigurationFile.ini CUSOURCE: ENABLERANU: False ENU: True ERRORREPORTING: False FARMACCOUNT: <empty> FARMADMINPORT: 0 FARMPASSWORD: ***** FEATURES: SQLENGINE,BIDS,CONN,IS,BC,SDK,SSMS,ADV_SSMS,SNAC_SDK,OCS FILESTREAMLEVEL: 0 FILESTREAMSHARENAME: <empty> FTSVCACCOUNT: <empty> FTSVCPASSWORD: ***** HELP: False IACCEPTSQLSERVERLICENSETERMS: False INDICATEPROGRESS: False INSTALLSHAREDDIR: C:\Program Files\Microsoft SQL Server\ INSTALLSHAREDWOWDIR: C:\Program Files (x86)\Microsoft SQL Server\ INSTALLSQLDATADIR: <empty> INSTANCEDIR: D:\SQLServer INSTANCEID: MSSQLSERVER INSTANCENAME: MSSQLSERVER ISSVCACCOUNT: NT AUTHORITY\SYSTEM ISSVCPASSWORD: ***** ISSVCSTARTUPTYPE: Automatic NPENABLED: 0 PASSPHRASE: ***** PCUSOURCE: PID: ***** QUIET: False QUIETSIMPLE: False ROLE: AllFeatures_WithDefaults RSINSTALLMODE: FilesOnlyMode RSSVCACCOUNT: NT AUTHORITY\NETWORK SERVICE RSSVCPASSWORD: ***** RSSVCSTARTUPTYPE: Automatic SAPWD: ***** SECURITYMODE: SQL SQLBACKUPDIR: <empty> SQLCOLLATION: SQL_Latin1_General_CP1_CI_AS SQLSVCACCOUNT: NT AUTHORITY\SYSTEM SQLSVCPASSWORD: ***** SQLSVCSTARTUPTYPE: Automatic SQLSYSADMINACCOUNTS: SA-SERVER\Administrator SQLTEMPDBDIR: <empty> SQLTEMPDBLOGDIR: <empty> SQLUSERDBDIR: <empty> SQLUSERDBLOGDIR: <empty> SQMREPORTING: False TCPENABLED: 1 UIMODE: Normal X86: False Configuration file: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20110228_112601\ConfigurationFile.ini Detailed results: Feature: Database Engine Services Status: Failed: see logs for details MSI status: Passed Configuration status: Passed Feature: SQL Client Connectivity SDK Status: Failed: see logs for details MSI status: Passed Configuration status: Passed Feature: Integration Services Status: Failed: see logs for details MSI status: Passed Configuration status: Passed Feature: Client Tools Connectivity Status: Failed: see logs for details MSI status: Passed Configuration status: Passed Feature: Management Tools - Complete Status: Failed: see logs for details MSI status: Passed Configuration status: Passed Feature: Management Tools - Basic Status: Failed: see logs for details MSI status: Passed Configuration status: Passed Feature: Client Tools SDK Status: Failed: see logs for details MSI status: Passed Configuration status: Passed Feature: Client Tools Backwards Compatibility Status: Failed: see logs for details MSI status: Passed Configuration status: Passed Feature: Business Intelligence Development Studio Status: Failed: see logs for details MSI status: Passed Configuration status: Passed Feature: Microsoft Sync Framework Status: Failed: see logs for details MSI status: Passed Configuration status: Passed Rules with failures: Global rules: Scenario specific rules: Rules report file: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20110228_112601\SystemConfigurationCheck_Report.htm

  Read the article

• SQL Server Agent was not running on Server Dynamics CRM 2013

  - by No1_Melman

  I'm trying to install Dynamics CRM 2013 on a server. This server is on a VM. There are several other VMs, an ADDS & DNS, a MSSQL and a WebServer VM. Each server is a Windows Server 2012 R2. The SQL Server is 2012 Enterprise. Each VM is part of the main Domain, set by the ADDS & DNS. NSLookup confirms I can see the computer at the right IP address. Each separate VM has its own static IP, the DNS is set to the ADDS & DNS. I use the domain administrator to log into all the servers, and make the that domain administrator a local administrator. I've set up all the domain users for the CRM and gave them appropriate permissions, I have also added the accounts to the appropriate places, such that the CRM Deployment user is in the SQL security. The SQL Agent is running. SQL server configuration manager has SQL server network configuration TCP/IP enabled to allow remote connections. The SQL server has the domain user as a administrator, which is the same user being used to install the CRM. In the CRM setup i point to the [Servername]\[Instance] and I have also tried just the [Servername]. to make this easier I called the server MSSQL and left the instance name to the default. I even install the MSSQL instance as the domain administrator. CRM can find the ReportServer url. I have enable all the ports required, including: 135, 1433, 1434, 2382, 2383, 4022. 1434 UDP. I feel like I have absolutely done everything, I have google many times and tried all the different methods, and for the life of me I cant seem to get the CRM setup to find the SQL server agent. It passes everything else perfectly fine. I can even ping the MSSQL server. What is the problem, why does the CRM still keep giving the error: SQLSERVERAGENT (SQLSERVERAGENT) service is not running on the server MSSQL On the MSSQL server, the name of the sql server agent service is: SQL Server Agent (MSSQLSERVER)

  Read the article

• Strange DNS issue with internal Windows DNS

  - by Brady

  I've encountered a strange issue with our internal Windows DNS infrastructure. We have a website hosted on Amazon EC2 with the DNS running on Amazon Route 53. In the publicly facing DNS we have the wildcard record setup as an A record Alias pointing to an AWS Elastic Load Balancer sitting in front of our EC2 instances. For those who are not aware, the A record Alias behaves like a CNAME record, however no extra lookup is required on the client side (See http://docs.amazonwebservices.com/Route53/latest/DeveloperGuide/CreatingAliasRRSets.html for more information). We have a secondary domain that has the www subdomain as a CNAME pointing to a subdomain on the primary domain, which resolves against the wildcard entry. For example the subdomain www.secondary.com is a CNAME to sub1.primary.com, but there is no explicit entry for sub1.primary.com, so it resolves to wildcard record. This setup work without issue publicly. The issue comes in our internal DNS at our corporate office where we use the same primary domain for some internal only facing sites. In this setup we have two Active Directory DNS servers with one Server 2003 and one Server 2008 R2 instance. The zone is an AD integrated zone, but it is not the AD domain. In the internal DNS we have the wildcard record pointing to a third external domain, that is also hosted on Route 53 with an A record Alias pointing to the same ELB instance. For example, *.primary.com is a CNAME to tertiary.com, so in effect you have www.secondary.com as a CNAME to *.primary.com, which is a CNAME to tertiary.com. In this setup, attempting to resolve www.secondary.com will fail. Clearing the cache on the Server 2003 instance will allow it to resolve once, but subsequent attempts will fail. It fails even with a clean cache against the 2008 R2 server. It seems that only Windows clients are affected. A Mac running OSX Mountain Lion does not experience this issue. I'm even able to replicate the issue using nslookup. Against the 2003 server, with a freshly cleaned cache, I recieve the appropriate response from www.secondary.com: Non-authoritative answer: Name: subdomain.primary.com Address: x.x.x.x (Public IP) Aliases: www.secondary.com Subsequent checks simply return: Non-authoritative answer: Name: www.secondary.com If you set the type to CNAME you get the appropriate responses all the time. www.secondary.com gives you: Non-authoritative answer: www.secondary.com canonical name = subdomain.primary.com And subdomain.primary.com gives you: subdomain.primary.com canonical name = tertiary.com And setting type back to A gives you the appropriate response for tertiary.com: Non-authoritative answer: Name: tertiary.com Address: x.x.x.x (Public IP) Against the 2008 R2 server things are a little different. Even with a clean cache, www.secondary.com returns just: Non-authoritative answer: Name: www.secondary.com The CNAME records are returned appropriately. www.secondary.com returns: Non-authoritative answer: www.secondary.com canonical name = subdomain.primary.com And subdomain.primary.com gives you: subdomain.primary.com canonical name = tertiary.com tertiary.com internet address = x.x.x.x (Public IP) tertiary.com AAAA IPv6 address = x::x (Public IPv6) And setting type back to A gives you the appropriate response for tertiary.com: Non-authoritative answer: Name: tertiary.com Address: x.x.x.x (Public IP) Requests directly against subdomain.primary.com work correctly.

  Read the article

< Previous Page | 372 373 374 375 376 377 378 379 380 381 382 383  | Next Page >