Search Results

Search found 11703 results on 469 pages for 'dev to production'.

Page 377/469 | < Previous Page | 373 374 375 376 377 378 379 380 381 382 383 384  | Next Page >

• Did I lost my RAID again?

  - by BarsMonster

  Hi! A little history: 2 years ago I was really excited to find out that mdadm is so powerful so it even can reshape arrays so you can start with a smaller array and the grow it as you need. I've bought 3x1Tb drives and made RAID-5. It was fine for a year. Then I bought 2x more, and tried to reshape to RAID-6 out of 5 drives, and due to some mess with superblock versions, lost all content. Had to rebuild it from scratch, but 2Tb of data were gone. Yesterday I bought 2 more drives, and this time I had everything: properly built array, UPS. I've disabled write intent map, added 2 new drives as a spare and run a command to grow array to 7-disk. It started working, but speed was ridiculously slow, ~100kb/sec. AFter processing first 37Mb at such an amasing speed, one of old HDDs fails. I properly shutdown PC and disconnected failed drive. After bootup it appeared it recreated intent map as it was still in mdadm config, so I removed it from config and rebooted again. Now all I see is that all mdadm processes deadlocks, and don't do anything. PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 1937 root 20 0 12992 608 444 D 0 0.1 0:00.00 mdadm 2283 root 20 0 12992 852 704 D 0 0.1 0:00.01 mdadm 2287 root 20 0 0 0 0 D 0 0.0 0:00.01 md0_reshape 2288 root 18 -2 12992 820 676 D 0 0.1 0:00.01 mdadm And all I see in mdstat is: $ cat /proc/mdstat Personalities : [linear] [multipath] [raid0] [raid1] [raid6] [raid5] [raid4] [raid10] md0 : active raid6 sdb1[1] sdg1[4] sdf1[7] sde1[6] sdd1[0] sdc1[5] 2929683456 blocks super 1.2 level 6, 1024k chunk, algorithm 2 [7/6] [UU_UUUU] [>....................] reshape = 0.0% (37888/976561152) finish=567604147.2min speed=0K/sec I've already tried mdadm 2.6.7, 3.1.4 and 3.2 - nothing helps. Did I lost my data again? Any suggestions how can I make it work? OS is Ubuntu Server 10.04.2... PS. Needless to say that data is unaccessible - I cannot mount /dev/md0 as save the most valuable data. You can see my disappointment - the very specific thing I was excited about failed twice taking 5Tb of my data with it.

  Read the article

• New Rapid Install StartCD 12.2.0.48 for EBS 12.2 Now Available

  - by Max Arderius

  A new Rapid Install startCD (Patch 18086193) for Oracle E-Business Suite Release 12.2 is now available. We recommend that all EBS customers installing or upgrading to EBS 12.2 use this latest update. The startCD updates are distributed to customers via My Oracle Support Patch which can be uncompressed on top of any previous 12.2 startCD under the main staging area. This patch replaces any previous startCDs. What's New in This Update? This new startCD version 12.2.0.48 includes important fixes for multi-node Installs, RAC, pre-install checks, platform specific issues, and upgrade scenario failures: 18703814 - QREP:122:RI:ISSUE WITH CHECKOS.CMD 18689527 - QREP:122:RI:ISSUE WITH FNDCORE.DLL SHIPPED AS PART OF R122 PACKAGE 18548485 - QREP1224:4:JAR SIGNER ISSUE DUE TO THE RI UPGRADE AUTOCONFIG CHANGES 18535812 - QREP:1220.48_4: 12.2.0 UPGRADE FILE SYSTEM LAY OUT IS AFFECTING THE DB TABLES 18507545 - WIN: UNABLE TO LAY DOWN FS PRIOR TO 12.2 UPGRADE WITHOUT AFFECTING RUNNING DB 18476041 - UNABLE TO LAY DOWN FS PRIOR TO 12.2 UPGRADE WITHOUT AFFECTING PRODUCTION DB 18459887 - R12.2 INSTALLATION FAILURE - OPMNCTL: NOT FOUND 18436053 - START CD 48_4 - ISSUES WITH TEMP SPACE CHECK 18424747 - QREP1224.3:ADD SERVER BROWSE BUTTON NOT WORKING 18421132 - *RW-50010: ERROR: - SCRIPT HAS RETURNED AN ERROR: 1 18403700 - QREP122.48:RI:UPGRADE RI PRECHECK HUNG IN SPLIT TIER APPS NODE ( NO SILENT ) 18383075 - ADD VERBOSE OPTION TO RAC VALIDATION 18363584 - UPTAKE INSTALL SCRIPTS FOR XB48_4 18336093 - QREP:122:RI:PATCH FS ADMIN SERVICE RUNNING AFTER RI UPGRADE CONFIGURE MODE 18320278 - QREP:1224.3:PLATFORM SPECIFIC SYNTAX ERRORS WITH DATE COMMAND IN DB CHECKER 18314643 - DISABLE SID=DB_NAME FOR RI UPGRADE FLOW IN RAC 18298977 - RI: EXCEPTION WHILE CLICKING RAC NODES BUTTON ON A NON-RAC SERVER 18286816 - QREP122:STARTCD48_3:TRAVERSING FROM VISION PASSW SCREEN TO PROD 18286371 - QREP122:STARTCD48_3:AMBIGUOUS MESSAGE DURING STAGE AREA CHECK ON HP 18275403 - QREP122:48:RI UPGRADE WITH EOH POST CHECKS HANGS IN SPLIT TIER DB NODE 18270631 - QREP122.48:MULTI-NODE RI USING NON-DEFAULT PASSWORDS NOT WORKING 18266046 - QREP122:48:RI NOT ALLOWING TO IGNORE THE RAC PRE-CHECK FAILURE 18242201 - UPTAKE TXK INSTALL SCRIPTS AND PLATFORMS.ZIP INTO STARTCD XB48_3 18236428 - QREP122.47:RI UPGRADE EXISTING OH FOR NON-DEFAULT APPS PASSWORD NOT WORKING 18220640 - INCONSISTENT DATABASE PORTS DURING EBS 12.2 INSTALLATION FOR STARTCD 12.2.0.47 18138796 - QREP122:47:RI 10.1.2 TECHSTACK NOT WORKING IF WE RUN RI FROM NEW STARTCD LOC 18138396 - TST1220: CONTROL FILE NAMING IN RAPID INSTALL SEEMS TO HAVE ISSUES 18124144 - IMPROVE HANDLING ERRORS FOUND IN CLUVFY LOG DURING PREINSTALL CHECKS 18111361 - VALIDATE ASM DB DATA FILES PATH AS +<DATA GROUP>/<PATH> 18102504 - QREP1220.47_5: UNZIP PANEL DOES NOT CREATE THE CORRECT STAGE 18083342 - 12.2 UPGRADE JAVA.NET.BINDEXCEPTION: CANNOT ASSIGN REQUESTED ADDRESS 18082140 - QREP122:47:RAC DB VALIDATION IS FAILS WITH EXIT STATUS IS 6 18062350 - 12.2.3 UPG: 12.2.0 INSTALLATION LOGS 18050840 - RI: UPGRADE WITH EXISTING RAC OH:SECONDARY DB NODE NAME IS BLANK 18049813 - RAC LOV DEFAULTS NOT SAVED UNLESS "SELECT" IS CLICKED 18003592 - TST1220:ADDITIONAL FREE SPACE CHECK FOR RI NEEDS TO BE CHECKED 17981471 - REMOVE ASM SPACE CHECK FROM RACVALIDATIONS.SH 17942179 - R12.2 INSTALL FAILING AT ADRUN11G.SH WITH ERRORS RW-50004 & RW-50010 17893583 - QREP1220.47:VALIDATION OF O.S IN RAPIDWIZ IN THE DB NODE CONFIGURATION SCREEN 17886258 - CLEANUP FND_NODES DURING UPGRADE FLOW 17858010 - RI POST INSTALL CHECKS (SSH VERIFICATION) STEP IS FAILING 17799807 - GEOHR: 12.2.0 - ERRORS IN RAPIDWIZ AND ADCONFIG LOGS 17786162 - QREP1223.4:RI:SERVICE_NAMES IS PRINTED AS SERVICE_NAME IN RI SCREEN 17782455 - RI: CONFIRM DEFAULT APPS PASSWORD IN SILENT MODE KICKOFF 17778130 - RI:ADMIN SERVER TO BE UP ON PRIMARY MID-TIER IN MULTI-NODE UPGRADE FS CREATION 17773989 - UN-SUPPORTED PLATFORM SHOWS 32 BIT AS HARD-CODED 17772655 - RELEVANT MESSAGE DURING THE RAPDIWIZ -TECHSTACK 17759279 - VERIFICATION PANEL DOES NOT EXPAND TECHNOLOGY STACK 17759183 - BUILDSTAGE SCRIPT MENU NEEDS TO BE ADJUSTED 17737186 - DATABASE PRE-REQ CHECK INCORRECTLY REPORTS SUCCESS ON AIX 17708082 - 12.2 INSTALLATION - OS PRE-REQUISITES CHECK 17701676 - TST122: GENERATE WRONG S_DBSID FOR PATCH FILE SYSTEM AT PHASE PREPARE 17630972 - /TMP PRE-REQ INSTALLATION CHECK 17617245 - 12.2 VISION INSTALL FAILS ON AIX 17603342 - OMCS: DB STAGING COMPLAINS WHILE MOVING IT TO FINAL LOCATION 17591171 - OMCS: DB STAGING FAILS WITH FRESH INSTALL R12.2 17588765 - CHECKER VERSION AND PLUGIN VERSION 17561747 - BUILDSTAGE.SH FAILS WITH ERROR WHEN STAGE HOSTED ON 32BIT LINUX 17539198 - RAPID INSTALL NEEDS TO IGNORE NON-REQUIRED STAGE ELEMENTS 17272808 - APPS USERS THAT HAVE DEFAULT PASSWORD AFTER 12.2 RAPID INSTALL References 12.2 Documentation Library 1581299.1 : EBS 12.2 Product Information Center 1320300.1 : Oracle E-Business Suite Release Notes, Release 12.2 1606170.1 : Oracle E-Business Suite Technology Stack and Applications DBA Release Notes for Release 12.2.3 1624423.1 : Oracle E-Business Suite Technology Stack and Applications DBA Release Notes for R12.TXK.C.Delta.4 and R12.AD.C.Delta.4 1594274.1 : Oracle E-Business Suite Release 12.2: Consolidated List of Patches and Technology Bug Fixes Related Articles Oracle E-Business Suite 12.2 Now Available startCD options to install Oracle E-Business Suite Release 12.2

  Read the article

• Code Contracts: validating arrays and collections

  - by DigiMortal

  Validating collections before using them is very common task when we use built-in generic types for our collections. In this posting I will show you how to validate collections using code contracts. It is cool how much awful looking code you can avoid using code contracts. Failing code Let’s suppose we have method that calculates sum of all invoices in collection. We have class Invoice and one of properties it has is Sum. I don’t introduce here any complex calculations on invoices because we have another problem to solve in this topic. Here is our code. public static decimal CalculateTotal(IList<Invoice> invoices) {     var sum = invoices.Sum(p => p.Sum);     return sum; } This method is very simple but it fails when invoices list contains at least one null. Of course, we can test if invoice is null but having nulls in lists like this is not good idea – it opens green way for different coding bugs in system. Our goal is to react to bugs ASAP at the nearest place they occur. There is one more way how to make our method fail. It happens when invoices is null. I thing it is also one common bugs during development and it even happens in production environments under some conditions that are usually hardly met. Now let’s protect our little calculation method with code contracts. We need two contracts: invoices cannot be null invoices cannot contain any nulls Our first contract is easy but how to write the second one? Solution: Contract.ForAll Preconditions in code are checked using Contract.Ensures method. This method takes boolean value as argument that sais if contract holds or not. There is also method Contract.ForAll that takes collection and predicate that must hold for that collection. Nice thing is ForAll returns boolean. So, we have very simple solution. public static decimal CalculateTotal(IList<Invoice> invoices) {     Contract.Requires(invoices != null);     Contract.Requires(Contract.ForAll<Invoice>(invoices, p => p != null));       var sum = invoices.Sum(p => p.Sum);     return sum; } And here are some lines of code you can use to test the contracts quickly. var invoices = new List<Invoice>(); invoices.Add(new Invoice()); invoices.Add(null); invoices.Add(new Invoice()); //CalculateTotal(null); CalculateTotal(invoices); If your code is covered with unit tests then I suggest you to write tests to check that these contracts hold for every code run. Conclusion Although it seemed at first place that checking all elements in collection may end up with for-loops that does not look so nice we were able to solve our problem nicely. ForAll method of contract class offered us simple mechanism to check collections and it does it smoothly the code-contracts-way. P.S. I suggest you also read devlicio.us blog posting Validating Collections with Code Contracts by Derik Whittaker.

  Read the article

• How does I/O work for large graph databases?

  - by tjb1982

  I should preface this by saying that I'm mostly a front end web developer, trained as a musician, but over the past few years I've been getting more and more into computer science. So one idea I have as a fun toy project to learn about data structures and C programming was to design and implement my own very simple database that would manage an adjacency list of posts. I don't want SQL (maybe I'll do my own query language? I'm just having fun). It should support ACID. It should be capable of storing 1TB let's say. So with that, I was trying to think of how a database even stores data, without regard to data structures necessarily. I'm working on linux, and I've read that in that world "everything is a file," including hardware (like /dev/*), so I think that that obviously has to apply to a database, too, and it clearly does--whether it's MySQL or PostgreSQL or Neo4j, the database itself is a collection of files you can see in the filesystem. That said, there would come a point in scale where loading the entire database into primary memory just wouldn't work, so it doesn't make sense to design it with that mindset (I assume). However, reading from secondary memory would be much slower and regardless some portion of the database has to be in primary memory in order for you to be able to do anything with it. I read this post: Why use a database instead of just saving your data to disk? And I found it difficult to understand how other databases, like SQLite or Neo4j, read and write from secondary memory and are still very fast (faster, it would seem, than simply writing files to the filesystem as the above question suggests). It seems the key is indexing. But even indexes need to be stored in secondary memory. They are inherently smaller than the database itself, but indexes in a very large database might be prohibitively large, too. So my question is how is I/O generally done with large databases like the one I described above that would be at least 1TB storing a big adjacency list? If indexing is more or less the answer, how exactly does indexing work--what data structures should be involved?

  Read the article

• T-SQL Tuesday #025 &ndash; CHECK Constraint Tricks

  - by Most Valuable Yak (Rob Volk)

  Allen White (blog | twitter), marathoner, SQL Server MVP and presenter, and all-around awesome author is hosting this month's T-SQL Tuesday on sharing SQL Server Tips and Tricks.  And for those of you who have attended my Revenge: The SQL presentation, you know that I have 1 or 2 of them.  You'll also know that I don't recommend using anything I talk about in a production system, and will continue that advice here…although you might be sorely tempted.  Suffice it to say I'm not using these examples myself, but I think they're worth sharing anyway. Some of you have seen or read about SQL Server constraints and have applied them to your table designs…unless you're a vendor ;)…and may even use CHECK constraints to limit numeric values, or length of strings, allowable characters and such.  CHECK constraints can, however, do more than that, and can even provide enhanced security and other restrictions. One tip or trick that I didn't cover very well in the presentation is using constraints to do unusual things; specifically, limiting or preventing inserts into tables.  The idea was to use a CHECK constraint in a way that didn't depend on the actual data: -- create a table that cannot accept data CREATE TABLE dbo.JustTryIt(a BIT NOT NULL PRIMARY KEY, CONSTRAINT chk_no_insert CHECK (GETDATE()=GETDATE()+1)) INSERT dbo.JustTryIt VALUES(1)   I'll let you run that yourself, but I'm sure you'll see that this is a pretty stupid table to have, since the CHECK condition will always be false, and therefore will prevent any data from ever being inserted.  I can't remember why I used this example but it was for some vague and esoteric purpose that applies to about, maybe, zero people.  I come up with a lot of examples like that. However, if you realize that these CHECKs are not limited to column references, and if you explore the SQL Server function list, you could come up with a few that might be useful.  I'll let the names describe what they do instead of explaining them all: CREATE TABLE NoSA(a int not null, CONSTRAINT CHK_No_sa CHECK (SUSER_SNAME()<>'sa')) CREATE TABLE NoSysAdmin(a int not null, CONSTRAINT CHK_No_sysadmin CHECK (IS_SRVROLEMEMBER('sysadmin')=0)) CREATE TABLE NoAdHoc(a int not null, CONSTRAINT CHK_No_AdHoc CHECK (OBJECT_NAME(@@PROCID) IS NOT NULL)) CREATE TABLE NoAdHoc2(a int not null, CONSTRAINT CHK_No_AdHoc2 CHECK (@@NESTLEVEL>0)) CREATE TABLE NoCursors(a int not null, CONSTRAINT CHK_No_Cursors CHECK (@@CURSOR_ROWS=0)) CREATE TABLE ANSI_PADDING_ON(a int not null, CONSTRAINT CHK_ANSI_PADDING_ON CHECK (@@OPTIONS & 16=16)) CREATE TABLE TimeOfDay(a int not null, CONSTRAINT CHK_TimeOfDay CHECK (DATEPART(hour,GETDATE()) BETWEEN 0 AND 1)) GO -- log in as sa or a sysadmin server role member, and try this: INSERT NoSA VALUES(1) INSERT NoSysAdmin VALUES(1) -- note the difference when using sa vs. non-sa -- then try it again with a non-sysadmin login -- see if this works: INSERT NoAdHoc VALUES(1) INSERT NoAdHoc2 VALUES(1) GO -- then try this: CREATE PROCEDURE NotAdHoc @val1 int, @val2 int AS SET NOCOUNT ON; INSERT NoAdHoc VALUES(@val1) INSERT NoAdHoc2 VALUES(@val2) GO EXEC NotAdHoc 2,2 -- which values got inserted? SELECT * FROM NoAdHoc SELECT * FROM NoAdHoc2   -- and this one just makes me happy :) INSERT NoCursors VALUES(1) DECLARE curs CURSOR FOR SELECT 1 OPEN curs INSERT NoCursors VALUES(2) CLOSE curs DEALLOCATE curs INSERT NoCursors VALUES(3) SELECT * FROM NoCursors   I'll leave the ANSI_PADDING_ON and TimeOfDay tables for you to test on your own, I think you get the idea.  (Also take a look at the NoCursors example, notice anything interesting?)  The real eye-opener, for me anyway, is the ability to limit bad coding practices like cursors, ad-hoc SQL, and sa use/abuse by using declarative SQL objects.  I'm sure you can see how and why this would come up when discussing Revenge: The SQL.;) And the best part IMHO is that these work on pretty much any version of SQL Server, without needing Policy Based Management, DDL/login triggers, or similar tools to enforce best practices. All seriousness aside, I highly recommend that you spend some time letting your mind go wild with the possibilities and see how far you can take things.  There are no rules! (Hmmmm, what can I do with rules?) #TSQL2sDay

  Read the article

• How to get my IR remote to work? Lirc can't see it

  - by user1234567

  I'm using Ubuntu 11.10 (amd64) and I'm trying to get my infrared remote control working. The IR device is a part of a DVB-T USB stick (Based on a RTL2832u chip). I'm using these drivers - it's the only way of getting this device to work under 11.10 that I found. It's a big impromevent from previous Ubuntu version, where I had to edit the driver's code. The device works quite great - and the IR part of it works, too. The driver's page says that the code it's in alpha stage, but I'm pretty sure that my issue has nothing to do with that. If, and only if driver's module is loaded with parameter rtl2832u_rc_mode=2 (which means "use NEC protocol for IR") the remote kind of works, I can see this by running cat /dev/.. ../input6 - when I press a button, random letters appear. The remote works just like a keyboard, but keys are totally messed up - when I press '5' the volume goes down, etc. I would like to use Lirc to fix that, but Lirc can't detect my device (i.e. irw shows nothing). I suspect, it's because something gets into control of the device and sets it up as a keyboard. Lirc seems to be working, it's KDE settings module works too, but it just doesn't detect the device. The Lirc page describes this issue, but since 2009 - the last year when that page was updated, Ubuntu moved from HAL (described there) to DeviceKit, rendering provided instruction useless. I had a similar issue with my previous remote, but the keys were not messed up so much - the remote was usable, so I gave up trying to get Lirc working. I tried the answer provided here, but it changed nothing. I also tried forcing lircd to use my device, but this didn't work too: for i in /sys/class/input/input* ; do echo -n "$(basename "$i"): "; cat "$i/name"; done shows input0: Power Button input1: Power Button input2: Logitech Logitech USB Keyboard input3: A4Tech PS/2+USB Mouse input6: IR-receiver inside an USB DVB receiver But when I run: lircd -n --device=name='IR*' as root (also tried with the full name) I always see: lircd-0.9.0[3983]: lircd(default) ready, using /var/run/lirc/lircd lircd-0.9.0[3983]: accepted new client on /var/run/lirc/lircd lircd-0.9.0[3983]: could not get file information for name=IR* lircd-0.9.0[3983]: default_init(): No such file or directory lircd-0.9.0[3983]: Failed to initialize hardware So, how to set up Lirc with devinput driver in such case?

  Read the article

• Upgrading Code from 2007 to 2010

  - by MOSSLover

  So I’ve been doing some upgrades just to see if things will work from 2007 to 2010.  So far most of the stuff I want works, but obviously there are some things that break.  Did you guys know that in 2007 you could add a webpart to the view pages for lists and libraries without losing the toolbar?  In 2010 the ribbon disappears every time you add a webpart.  So if you are using Scot Hillier’s Codeplex project to hide buttons it will not work the same way, because the ribbon is going to disappear altogether. I have also learned another reason why standalone installations are the bane of my existence.  Nine times out of ten the installation is done using Network Service as the application pool account.  You are wondering why is this bad?  Well, let’s just say the site collection administrator with local admin rights wants to attach the IIS Worker process and debug say a webpart.  Visual Studio 2010 will throw a nasty error that tells you that you are not an administrator.  You will say, but I am an administrator?  I have all the correct group permissions on the server and on SQL and in SharePoint.  Then you will go in and decide let’s add my own admin account just to see if I can attach the debugger and you will notice that works properly.  So the morale of the story is create a separate account on your development environment to run all the SharePoint Services and such.  You don’t need to go all out and create the best practices amount of accounts if it’s just your dev environment.  I would at least create one single account to run all your SharePoint process (Services, SQL, and App Pool).  Also, don’t run a standalone install unless you want to kill kittens (this is a quote from Todd Klindt).  We love kittens they are cute and awesome.  Besides you learn more if you click Complete and just skip standalone.  You will learn how to setup SQL Server 2008 and you will learn how to configure your environment.  It will help you in the long run.  So I have ranted enough for today I figure these are enough tidbits for you this time around.  The two of you who read my blog and I know some of you are friends who don’t understand SharePoint.  I might as well have just done “wahwahwahwah” in Charlie Brown adult speak.  Thanks for reading as usual.  I’ll catch you all when I complain more about the upgrade process and share more tidbits, which will inevitably become a presentation at a conference or two. Technorati Tags: Upgrade Code SharePoint 2007 to 2010,Visuaul Studio 2010,SharePoint 2010

  Read the article

• Framework 4 Features: Login Id Support

  - by Anthony Shorten

  Given that Oracle Utilities Application Framework 4 is available as part of Mobile Work Force Management and other product progressively I am preparing a number of short but sweet blog entries highlighting some of the new functionality that has been implemented. This is the first entry and it is on a new security feature called Login Id. In past releases of the Oracle Utilities Application Framework, the userid used for authentication and authorization was limited to eight (8) characters in length. This mirrored what the market required in the past with LAN userids and even legacy userids being that length. The technology market has since progressed to longer userid lengths. It is very common to hear that email addresses are being used as credentials for production systems. To achieve this in past versions of the Oracle Utilities Application Framework, sites had to introduce a short userid (8 characters in length) as an alias in your preferred security store. You then configured your J2EE Web Application Server to use the alias as credentials. This sometimes was a standard feaure of the security store and/or the J2EE Web Application Server, if you were lucky. If not, some java code has to be written to implement the solution. In Oracle Utilities Application Framework 4 we introduced a new attribute on the user object called Login Id. The Login Id can be up to 256 characters in length and is an alternative to the existing userid stored on the user object. This means the Oracle Utilities Application Framework can support both long and short userids. For backward compatibility we use the Login Id for authentication but the short userid for authorization and auditing. The user object within the Oracle Utilities Application Framework holds the translation. Backward compatibility is always a consideration in any of our designs for future or changed functionality. You will see reference to this fact in the blog entries I will be composing over the next few months. We have also thought about the flexibility in implementing this feature. The Login Id can be the same value of the Userid (the default for backward compatibility) or can be different. Both the Login Id and Userid have to be unique. This avoids sharing of credentials and is also backward compatible. You can manually enter the Login Id or provision it from Oracle Identity Manager (or other tool). If you use the Login Id only, then we will not autogenerate a short userid automatically as the rules for this can vary from site to site. You have a number of options there. Most Identity provisioning tools can generate a short userid at user creation time and this can be used. If you do not use provisioning tools, then you can write a class extension using the SDK to autoegenerate the userid based upon your sites preference. When we designed the feature there were lots of styles of generating userids (random, initial and surname, numbers etc). We could not really see a clear winner in that respect so we just allowed the extension to be inserted in if necessary. Most customers indicated to us that identity provisioning was the preferred way. This is why we released an Oracle Identity Manager integration with the framework. The Login id is case sensitive now which was not supported under userid. The introduction of the Login Id allows the product to offer flexible options when configuring security whilst maintaining backward compatibility.

  Read the article

• RC of Entity Framework 4.1 (which includes EF Code First)

  - by ScottGu

  Last week the data team shipped the Release Candidate of Entity Framework 4.1.  You can learn more about it and download it here. EF 4.1 includes the new “EF Code First” option that I’ve blogged about several times in the past.  EF Code First provides a really elegant and clean way to work with data, and enables you to do so without requiring a designer or XML mapping file.  Below are links to some tutorials I’ve written in the past about it: Code First Development with Entity Framework 4.x EF Code First: Custom Database Schema Mapping Using EF Code First with an Existing Database The above tutorials were written against the CTP4 release of EF Code First (and so some APIs might be a little different) – but the concepts and scenarios outlined in them are the same as with the RC. Go Live License Last week’s EF 4.1 RC ships with a “go live” license that enables you to use it in production environments.  The final release of EF 4.1 will ship within the next 4 weeks and will be 100% API compatible with the RC release. Improvements with the RC The RC includes several improvements and enhancements.  The EF team has a good blog post summarizing the RC changes.  Scott Hanselman also has a nice video interview with the data team that talks more about the release. One of my favorite improvements introduced with last week’s RC is its support for medium trust security.  This enables you to use EF 4.1 (and code-first) within low-cost ASP.NET shared hosting web environments – without requiring a hoster to install anything to use it. EF 4.1 also now supports validation with not only code-first scenarios, but also model-first and database-first workflows.  Upgrading from previous releases The RC does include a few API tweaks and changes from the prior CTP builds.  Read the release notes that come with the release to get a more detailed listing of the changes. John Papa also has an excellent Upgrading to EF 4.1 RC blog post that describes the steps he took when upgrading a large project he wrote with the previous CTP5 release.  The work to upgrade is pretty straight forward and easy – use his write-up as a guide on how to quickly update projects of your own. NuGet Package Rename One of the changes that the data team made between the CTP5 and RC releases was to rename the NuGet package name from “EFCodeFirst” to “EntityFramework”. They decided to make this change since the EF 4.1 release now includes several additions above and beyond just code first. If you already have installed the “EFCodeFirst” NuGet package, you’ll want to uninstall it and then install the new “EntityFramework” NuGet package.  John Papa’s blog post details the exact steps on how to do this (it only takes ~20 seconds to do this). More EF Tutorials Julie Lerman has created some nice whitepapers and tutorials for MSDN that show using the new EF4 and EF 4.1 feature set. Click here to find links to read and watch them. Summary I’m really excited about the EF 4.1 release that will be shipping next month.  It significantly improves the Entity Framework, and makes it even easier and cleaner to work with data inside of .NET.  You can take advantage of it within all ASP.NET projects (including both Web Forms and MVC), within client projects using Windows Forms and WPF, and within other project types like WCF, Console and Services.  You can use NuGet to easily install it within all of them. Hope this helps, Scott P.S. I am also now using Twitter for quick updates and to share links. Follow me at: twitter.com/scottgu

  Read the article

• Sweet and Sour Source Control

  - by Tony Davis

  Most database developers don't use Source Control. A recent anonymous poll on SQL Server Central asked its readers "Which Version Control system do you currently use to store you database scripts?" The winner, with almost 30% of the vote was...none: "We don't use source control for database scripts". In second place with almost 28% of the vote was Microsoft's VSS. VSS? Given its reputation for being buggy, unstable and lacking most of the basic features required of a proper source control system, answering VSS is really just another way of saying "I don't use Source Control". At first glance, it's a surprising thought. You wonder how database developers can work in a team and find out what changed, when the system worked before but is now broken; to work out what happened to their changes that now seem to have vanished; to roll-back a mistake quickly so that the rest of the team have a functioning build; to find instantly whether a suspect change has been deployed to production. Unfortunately, the survey didn't ask about the scale of the database development, and correlate the two questions. If there is only one database developer within a schema, who has an automated approach to regular generation of build scripts, then the need for a formal source control system is questionable. After all, a database stores far more about its metadata than a traditional compiled application. However, what is meat for a small development is poison for a team-based development. Here, we need a form of Source Control that can reconcile simultaneous changes, store the history of changes, derive versions and builds and that can cope with forks and merges. The problem comes when one borrows a solution that was designed for conventional programming. A database is not thought of as a "file", but a vast, interdependent and intricate matrix of tables, indexes, constraints, triggers, enumerations, static data and so on, all subtly interconnected. It is an awkward fit. Subversion with its support for merges and forks, and the tolerance of different work practices, can be made to work well, if used carefully. It has a standards-based architecture that allows it to be used on all platforms such as Windows Mac, and Linux. In the words of Erland Sommerskog, developers should "just do it". What's in a database is akin to a "binary file", and the developer must work only from the file. You check out the file, edit it, and save it to disk to compile it. Dependencies are validated at this point and if you've broken anything (e.g. you renamed a column and broke all the objects that reference the column), you'll find out about it right away, and you'll be forced to fix it. Nevertheless, for many this is an alien way of working with SQL Server. Subversion is the powerhouse, not the GUI. It doesn't work seamlessly with your existing IDE, and that usually means SSMS. So the question then becomes more subtle. Would developers be less reluctant to use a fully-featured source (revision) control system for a team database development if they had a turn-key, reliable system that fitted in with their existing work-practices? I'd love to hear what you think. Cheers, Tony.

  Read the article

• How can I best manage making open source code releases from my company's confidential research code?

  - by DeveloperDon

  My company (let's call them Acme Technology) has a library of approximately one thousand source files that originally came from its Acme Labs research group, incubated in a development group for a couple years, and has more recently been provided to a handful of customers under non-disclosure. Acme is getting ready to release perhaps 75% of the code to the open source community. The other 25% would be released later, but for now, is either not ready for customer use or contains code related to future innovations they need to keep out of the hands of competitors. The code is presently formatted with #ifdefs that permit the same code base to work with the pre-production platforms that will be available to university researchers and a much wider range of commercial customers once it goes to open source, while at the same time being available for experimentation and prototyping and forward compatibility testing with the future platform. Keeping a single code base is considered essential for the economics (and sanity) of my group who would have a tough time maintaining two copies in parallel. Files in our current base look something like this: > // Copyright 2012 (C) Acme Technology, All Rights Reserved. > // Very large, often varied and restrictive copyright license in English and French, > // sometimes also embedded in make files and shell scripts with varied > // comment styles. > > > ... Usual header stuff... > > void initTechnologyLibrary() { > nuiInterface(on); > #ifdef UNDER_RESEARCH > holographicVisualization(on); > #endif > } And we would like to convert them to something like: > // GPL Copyright (C) Acme Technology Labs 2012, Some rights reserved. > // Acme appreciates your interest in its technology, please contact [email protected] > // for technical support, and www.acme.com/emergingTech for updates and RSS feed. > > ... Usual header stuff... > > void initTechnologyLibrary() { > nuiInterface(on); > } Is there a tool, parse library, or popular script that can replace the copyright and strip out not just #ifdefs, but variations like #if defined(UNDER_RESEARCH), etc.? The code is presently in Git and would likely be hosted somewhere that uses Git. Would there be a way to safely link repositories together so we can efficiently reintegrate our improvements with the open source versions? Advice about other pitfalls is welcome.

  Read the article

• Can't fix broken packages

  - by AWE

  I am too dumb but determined to use Ubuntu that I paid a professional to install it for me (dualboot 11.10 with Win7). When I came home I got a lot of things from the software center. Skype did not have a download button so I googled it and Ubuntu help told me to do this: sudo add-apt-repository "deb http://archive.canonical.com/ $(lsb_release -sc) partner" and then this: sudo apt-get update && sudo apt-get install skype The terminal told me "that this is potentially harmful..." but I thought it was Ubuntu language meaning "are you sure?" Now the computer is mute. Items cannot be installed or removed until the package catalog is repaired, so I want to repair it but the package operation fails. "sudo aptitude -f install" - command not found Synaptic package manager tells me that I have two broken packages, libc6 and libc6-dev so I do this: sudo apt-get update && sudo apt-get upgrade which tells me to do this: sudo apt-get -f install that ends up like this: Can't exec "locale": No such file or directory at /usr/share/perl5/Debconf/Encoding.pm line 16. Use of uninitialized value $Debconf::Encoding::charmap in scalar chomp at /usr/share/perl5/Debconf/Encoding.pm line 17. Preconfiguring packages ... dpkg: warning: 'ldconfig' not found in PATH or not executable. dpkg: error: 1 expected program not found in PATH or not executable. Note: root's PATH should usually contain /usr/local/sbin, /usr/sbin and /sbin. E: Sub-process /usr/bin/dpkg returned an error code (2) When fixing broken packages in synaptic package manager I get this: Preconfiguring packages ... dpkg: warning: 'ldconfig' not found in PATH or not executable. dpkg: error: 1 expected program not found in PATH or not executable. Note: root's PATH should usually contain /usr/local/sbin, /usr/sbin and /sbin. E: Sub-process /usr/bin/dpkg returned an error code (2) A package failed to install. Trying to recover: dpkg: warning: 'ldconfig' not found in PATH or not executable. dpkg: error: 1 expected program not found in PATH or not executable. Note: root's PATH should usually contain /usr/local/sbin, /usr/sbin and /sbin. I want to become a linux geek but it is harder than I thought. Please help!

  Read the article

• Unit Testing TSQL

  - by Grant Fritchey

  I went through a period of time where I spent a lot of effort figuring out how to set up unit tests for TSQL. It wasn't easy. There are a few tools out there that help, but mostly it involves lots of programming. well, not as much as before. Thanks to the latest Down Tools Week at Red Gate a new utility has been built and released into the wild, SQL Test. Like a lot of the new tools coming out of Red Gate these days, this one is directly integrated into SSMS, which means you're working where you're comfortable and where you already have lots of tools at your disposal. After the install, when you launch SSMS and get connected, you're prompted to install the tSQLt example database. Go for it. It's a quick way to see how the tool works. I'd suggest using it. It' gives you a quick leg up. The concepts are pretty straight forward. There are a series of CLR commands that you use to configure a test and the test assertions. In between you're calling TSQL, either calls to your structure, queries, or stored procedures. They already have the one things that I always found wanting in database tests, a way to compare tables of results. I also like the ability to create a dummy copy of tables for the tests. It lets you control structures and behaviors so that the tests are more focused. One of the issues I always ran into with the other testing tools is that setting up the tests might require potentially destructive changes to the structure of the database (dropping FKs, etc.) which added lots of time and effort to setting up the tests, making testing more difficult, and therefor, less useful. Functionally, this is pretty similar to the Visual Studio tests and TSQLUnit tests that I used to use. The primary improvement over the Visual Studio tests is that I'm working in SSMS instead of Visual Studio. The primary improvement over TSQLUnit is the SQL Test interface it self. A lot of the functionality is the same, but having a sweet little tool to manage & run the tests from makes a huge difference. Oh, and don't worry. You can still run these tests directly from TSQL too, so automation has not gone away. I'm still thinking about how I'd use this in a dev environment where I also had source control to fret. That might be another blog post right there. I'm just getting started with SQL Test, so this is the first of several blog posts & videos. Watch this space. Try the tool.

  Read the article

• Deploying an SSL Application to Windows Azure &ndash; The Dark Secret

  - by ToStringTheory

  When working on an application that had been in production for some time, but was about to have a shopping cart added to it, the necessity for SSL certificates came up.  When ordering the certificates through the vendor, the certificate signing request (CSR) was generated through the providers (http://register.com) web interface, and within a day, we had our certificate. At first, I thought that the certification process would be the hard part…  Little did I know that my fun was just beginning… The Problem I’ll be honest, I had never really secured a site before with SSL.  This was a learning experience for me in the first place, but little did I know that I would be learning more than the simple procedure.  I understood a bit about SSL already, the mechanisms in how it works – the secure handshake, CA’s, chains, etc…  What I didn’t realize was the importance of the CSR in the whole process.  Apparently, when the CSR is created, a public key is created at the same time, as well as a private key that is stored locally on the PC that generated the request.  When the certificate comes back and you import it back into IIS (assuming you used IIS to generate the CSR), all of the information is combined together and the SSL certificate is added into your store. Since at the time the certificate had been ordered for our site, the selection to use the online interface to generate the CSR was chosen, the certificate came back to us in 5 separate files: A root certificate – (*.crt file) An intermediate certifcate – (*.crt file) Another intermediate certificate – (*.crt file) The SSL certificate for our site – (*.crt file) The private key for our certificate – (*.key file) Well, in case you don’t know much about Windows Azure and SSL certificates, the first thing you should learn is that certificates can only be uploaded to Azure if they are in a PFX package – securable by a password.  Also, in the case of our SSL certificate, you need to include the Private Key with the file.  As you can see, we didn’t have a PFX file to upload. If you don’t get the simple PFX from your hosting provider, but rather the multiple files, you will soon find out that the process has turned from something that should be simple – to one that borders on a circle of hell… Probably between the fifth and seventh somewhere… The Solution The solution is to take the files that make up the certificates chain and key, and combine them into a file that can be imported into your local computers store, as well as uploaded to Windows Azure.  I can not take the credit for this information, as I simply researched a while before finding out how to do this. Download the OpenSSL for Windows toolkit (Win32 OpenSSL v1.0.1c) Install the OpenSSL for Windows toolkit Download and move all of your certificate files to an easily accessible location (you'll be pointing to them in the command prompt, so I put them in a subdirectory of the OpenSSL installation) Open a command prompt Navigate to the folder where you installed OpenSSL Run the following command: openssl pkcs12 -export –out {outcert.pfx} –inkey {keyfile.key}      –in {sslcert.crt} –certfile {ca1.crt} –certfile (ca2.crt) From this command, you will get a file, outcert.pfx, with the sum total of your ssl certificate (sslcert.crt), private key {keyfile.key}, and as many CA/chain files as you need {ca1.crt, ca2.crt}. Taking this file, you can then import it into your own IIS in one operation, instead of importing each certificate individually.  You can also upload the PFX to Azure, and once you add the SSL certificate links to the cloud project in Visual Studio, your good to go! Conclusion When I first looked around for a solution to this problem, there were not many places online that had the information that I was looking for.  While what I ended up having to do may seem obvious, it isn’t for everyone, and I hope that this can at least help one developer out there solve the problem without hours of work!

  Read the article

• Tuning Default WorkManager - Advantages and Disadvantages

  - by Murali Veligeti

  Before discussing on Tuning Default WorkManager, lets have a brief introduction on What is Default WorkManger Before Weblogic Server 9.0 release, we had the concept of Execute Queues. WebLogic Server (before WLS 9.0), processing was performed in multiple execute queues. Different classes of work were executed in different queues, based on priority and ordering requirements, and to avoid deadlocks. In addition to the default execute queue, weblogic.kernel.default, there were pre-configured queues dedicated to internal administrative traffic, such as weblogic.admin.HTTP and weblogic.admin.RMI.Users could control thread usage by altering the number of threads in the default queue, or configure custom execute queues to ensure that particular applications had access to a fixed number of execute threads, regardless of overall system load. From WLS 9.0 release onwards WebLogic Server uses is a single thread pool (single thread pool which is called Default WorkManager), in which all types of work are executed. WebLogic Server prioritizes work based on rules you define, and run-time metrics, including the actual time it takes to execute a request and the rate at which requests are entering and leaving the pool.The common thread pool changes its size automatically to maximize throughput. The queue monitors throughput over time and based on history, determines whether to adjust the thread count. For example, if historical throughput statistics indicate that a higher thread count increased throughput, WebLogic increases the thread count. Similarly, if statistics indicate that fewer threads did not reduce throughput, WebLogic decreases the thread count. This new strategy makes it easier for administrators to allocate processing resources and manage performance, avoiding the effort and complexity involved in configuring, monitoring, and tuning custom executes queues. The Default WorkManager is used to handle thread management and perform self-tuning.This Work Manager is used by an application when no other Work Managers are specified in the application’s deployment descriptors. In many situations, the default Work Manager may be sufficient for most application requirements. WebLogic Server’s thread-handling algorithms assign each application its own fair share by default. Applications are given equal priority for threads and are prevented from monopolizing them. The default work-manager, as its name tells, is the work-manager defined by default.Thus, all applications deployed on WLS will use it. But sometimes, when your application is already in production, it's obvious you can't take your EAR / WAR, update the deployment descriptor(s) and redeploy it.The default work-manager belongs to a thread-pool, as initial thread-pool comes with only five threads, that's not much. If your application has to face a large number of hits, you may want to start with more than that.Well, that's quite easy. You have  two option to do so.1) Modify the config.xmlJust add the following line(s) in your server definition : <server> <name>AdminServer</name> <self-tuning-thread-pool-size-min>100</self-tuning-thread-pool-size-min> <self-tuning-thread-pool-size-max>200</self-tuning-thread-pool-size-max> [...] </server> 2) Adding some JVM parameters Add the following system property in setDomainEnv.sh/setDomainEnv.cmd or startWebLogic.sh/startWebLogic.cmd : -Dweblogic.threadpool.MinPoolSize=100 -Dweblogic.threadpool.MaxPoolSize=100 Reboot WLS and see the option has been taken into account . Disadvantage: So far its fine. But here there is an disadvantage in tuning Default WorkManager. Internally Weblogic Server has many work managers configured for different types of work.  if we run out of threads in the self-tuning pool(because of system property -Dweblogic.threadpool.MaxPoolSize) due to being undersized, then important work that WLS might need to do could be starved.  So, while limiting the self-tuning would limit the default WorkManager and internally it also limits all other internal WorkManagers which WLS uses.So the best alternative is to override the default WorkManager that means creating a WorkManager for the Application and assign the WorkManager for the application instead of tuning the Default WorkManager.

  Read the article

• How to force a new Notification in notify-osd to show up without waiting for the earlier one to exit?

  - by Nirmik

  I have made a script(and a .desktop shortcut leading to this script) for starting and stoping xampp... It checks the status of xampp and accordingly either starts or stops xampp. Now i have assigned a notification as soon as the script is started to display "Starting xampp..." or "Stopping xampp..." and then when xampp is started or stopped,it displays "Xampp started..." or "Xampp stopped..." I've used notify-send to show notification as seen in the script below Now the thing is that here,the second notification waits for the 1st one to disappear and then pops up even if xampp has started/stopped. I want the new notification to appear immediately by forcing the earlier one to exit before the completion of its life-cycle. This can be seen to take plce when you activate/deactivate wireless/networking immediately... For example the "Wireless enabled" comes up on selecting enable wireless and if you immediately select disable wireless,the "Wireless disabled" notification comes up without waiting for "Wireless enabled" notification to complete its life-cycle. So how do i achieve this? #!/bin/sh SERVICE='proftpd' if ps ax | grep -v grep | grep $SERVICE /dev/null then notify-send -i /opt/lampp/htdocs/xampp/img/logo-small.gif "Stopping XAMPP..." && gksudo /opt/lampp/lampp stop && notify-send -i /opt/lampp/htdocs/xampp/img/logo- small.gif "XAMPP Stoped." else notify-send -i /opt/lampp/htdocs/xampp/img/logo-small.gif "Starting XAMPP..." && gksudo /opt/lampp/lampp start && notify-send -i /opt/lampp/htdocs/xampp/img/logo-small.gif "XAMPP Started." fi On the man page for notify-send I found --urgency=LEVEL or -u where levels are low, normal, critical. Is this of any use? making it critical? Also I tried it with the command- notify-send -u=critical"Testing" but that dint work...it gives the error- Unknown urgency criticalTesting specified. Known urgency levels: low, normal, critical. or if I give the command notify-send -u=LOW"Testing" it gives me error missing argument to -u Any relation??

  Read the article

• Why I Love Microsoft Development

  - by Brian Lanham

  I've been writing software for a while and recently had an opportunity to broaden my horizons and start developing for iOS. We decided to leverage, as much as possible, our existing skills and use MonoTouch and MonoDevelop by Novell.    For those of you who do not know, Mono is a .NET port originally designed for Linux but adapted for other platforms as well. MonoTouch is a port specifically for building iOS applications using the .NET framework. MonoDroid is a port (in CTP-esque release) for Android.   A MISSING COMPONENT - VISUAL DESIGNER   MonoDevelop lacks one very significant component compared with other tools I am using: NO VISUAL DESIGNER. Instead of using an integrated visual designer, MonoDevelop shells to the Mac OS "Interface Builder".  Since MonoDevelop lets me have a "Visual Studio-esque" feel *and* I get to use C#, AND it's FREE, I am gladly willing to overlook this.  In fact, it's not even a question.  Free?  Sure, I'll take it with no Visual Designer.   In my experiences I've grown from UNIX and DOS to .NET development through many steps. Java/JSP/Servlets; Windows; Web; etc. I've been doing .NET for quite a few years and I guess I just got "comfortable" with the tools.   WHY AM I NOT GETTING IT?   Interface Builder (IB) is amazingly confusing for me. I had the opportunity to speak at the Northern VA Code Camp on 12/11/2010. My presentation was "Getting Started with iOS Development using MonoTouch and C#".    At the visual design part of the presentation, I asked one of the 3 or 4 Mac developers in the room about my confusion with the IB. I don't understand why the "Classes" list includes objects. I don't understand what "File's Owner" is. And, most importantly, WHAT THE HECK IS AN OUTLET AND WHY IS IT NECESSARY?!?!?"   His response to these question (especially Outlets): "They did it wrong."   I'm accustom to a visual designer that creates variables for graphical widgets for me. Not IB. Instead, I have to create "Outlets" manually. I still do not understand why and, the explanation from a seasoned Mac developer is that it's wrong. (He received nods of confirmation from the other Mac devs in the room.)   I LOVE MS DEV   I love development for Microsoft platforms using Microsoft development tools. I love Windows 7. I love Visual Studio 2010. I love SQL Server. Azure, Entity Framework, Active Directory, Office, WCF/WF/WPF, etc. are all designed with integration in mind. They are also all designed with developers in mind.   Steve Ballmer recently ranted "It's the developers!" That's why it is relatively quick to build apps using MS tools. Clearly, MS knows that while we usually enjoy building technology solutions, we are here to make money. And we need tools that accelerate our time to market without compromising the power and quality of our solutions.   So, yeah, I am sucking up I guess. But I love Microsoft Development. Thank you, Microsoft, for providing the plethora of great development tools.    P.S. (but please slow down a bit…I'm having trouble keeping up!)

  Read the article

• Display Driver Issue on an hp TX2-1160ea Notebook

  - by Sam

  I'm new to Linux and recently switched to Ubuntu 11.04 due to my project requirement. My laptop has been freezing and going to black screen of death when I run anything related to display (Share desktop, stream video, etc). Today I went through the Ubuntu forum to install the appropriate graphic driver and, after doing it, I rebooted my PC. It gave an error before login saying "select the recovery mode" and after clicking OK, it didn't give the same error on reboot but I've lost the 11.04 graphical interface and all I see is the interface of Ubuntu v10 with slow visuals (even scrolling up/down on browser is really slow). For the reference, here's a desktop screenshot so that you can understand the situation. Also the laptop is overheating. How can I fix this problem? How can i get the Ubuntu 11.04 view back? I also tried Google, but couldn't find any issue like this. Some general Information: Laptop: HP TouchSmart TX2-1160ea Processor: AMD Turion TX2 Memory: 4GB OS: Ubuntu 11.04 Some debugging information:: $ report-hw | grep controller lspci -knn: 00:11.0 SATA controller [0106]: ATI Technologies Inc SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode] [1002:4391] lspci -knn: 00:14.3 ISA bridge [0601]: ATI Technologies Inc SB7x0/SB8x0/SB9x0 LPC host controller [1002:439d] lspci -knn: 01:05.0 VGA compatible controller [0300]: ATI Technologies Inc RS780M/RS780MN [Radeon HD 3200 Graphics] [1002:9612] lspci -knn: 08:00.0 Network controller [0280]: Broadcom Corporation BCM4322 802.11a/b/g/n Wireless LAN Controller [14e4:432b] (rev 01) lspci -knn: 09:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 02) And: $ dpkg -l '*fglrx*' Desired=Unknown/Install/Remove/Purge/Hold | Status=Not/Inst/Conf-files/Unpacked/halF-conf/Half-inst/trig-aWait/Trig-pend |/ Err?=(none)/Reinst-required (Status,Err: uppercase=bad) ||/ Name Version Description +++-==============-==============-============================================ ii fglrx 2:8.840-0ubunt Video driver for the ATI graphics accelerato ii fglrx-amdcccle 2:8.840-0ubunt Catalyst Control Center for the ATI graphics un fglrx-control <none> (no description available) un fglrx-control- <none> (no description available) ii fglrx-dev 2:8.840-0ubunt Video driver for the ATI graphics accelerato un fglrx-driver <none> (no description available) un fglrx-driver-d <none> (no description available) un fglrx-kernel-s <none> (no description available) un fglrx-modalias <none> (no description available) un xfree86-driver <none> (no description available) un xfree86-driver <none> (no description available) un xorg-driver-fg <none> (no description available) un xorg-driver-fg <none> (no description available) If you need any more information that could help, just ask.

  Read the article

• How do I set up nvidia graphics adapter to put out 1080p, it seems to be using interlace mode>

  - by keepitsimpleengineer

  After upgrading to 12.04, my mythbuntu client/server seems to be running in 1080i, the clue comes from: [ 1176.117] (II) NVIDIA(0): Setting mode "1920x1080_60i" [ 1231.340] (II) NVIDIA(0): Setting mode "DFP-1:1920x1080_60@1920x1080+0+0" This is from Xorg.0.log. This whole thing started from video tearing when watching Mythtv recordings. It didn't happen in 10.10. Should I use "TVStandard" "HD1080p" in the screen section since this is a dedicated HTPC? It only connects to an HDTV (1080p) via hdmi. Here is the current xorg.conf file: # nvidia-settings: X configuration file generated by nvidia-settings # nvidia-settings: version 270.29 (buildd@allspice) Fri Feb 25 14:42:07 UTC 2011 Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" 0 0 # commented out by update-manager, HAL is now used and auto-detects devices # Keyboard settings are now read from /etc/default/console-setup # InputDevice "Keyboard0" "CoreKeyboard" # commented out by update-manager, HAL is now used and auto-detects devices # Keyboard settings are now read from /etc/default/console-setup # InputDevice "Mouse0" "CorePointer" Option "Xinerama" "0" EndSection Section "Files" FontPath "unix/:7100" EndSection # commented out by update-manager, HAL is now used and auto-detects devices # Keyboard settings are now read from /etc/default/console-setup #Section "InputDevice" # # generated from default # Identifier "Mouse0" # Driver "mouse" # Option "Protocol" "auto" # Option "Device" "/dev/psaux" # Option "Emulate3Buttons" "no" # Option "ZAxisMapping" "4 5" #EndSection # commented out by update-manager, HAL is now used and auto-detects devices # Keyboard settings are now read from /etc/default/console-setup #Section "InputDevice" # # generated from default # Identifier "Keyboard0" # Driver "kbd" #EndSection Section "Monitor" # HorizSync source: edid, VertRefresh source: edid Identifier "Monitor0" VendorName "Unknown" ModelName "SAMSUNG" HorizSync 26.0 - 81.0 VertRefresh 24.0 - 75.0 Option "DPMS" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce GT 240" Option "TripleBuffer" "1" EndSection Section "Screen" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "TwinView" "0" Option "metamodes" "DFP: nvidia-auto-select +0+0" SubSection "Display" Depth 24 EndSubSection EndSection After a little digging, the question changes slightly, to wit... Per Chapter 19 of nvidia README... "If the EDID for the display device reported a preferred mode timing, and that mode timing is considered a valid mode, then that mode is used as the "nvidia-auto-select" mode." The EDID for my HDMI connected LCD monitor says use first device as preferred. Prefer first detailed timing : Yes Also: (--) NVIDIA(0): EDID maximum pixel clock : 230.0 MHz The list: (from startx -- -verbose 6 ) (--) NVIDIA(0): Detailed Timings: (--) NVIDIA(0): 1920 x 1080 @ 60 Hz (--) NVIDIA(0): Pixel Clock : 148.50 MHz (--) NVIDIA(0): HRes, HSyncStart : 1920, 2008 (--) NVIDIA(0): HSyncEnd, HTotal : 2052, 2200 (--) NVIDIA(0): VRes, VSyncStart : 1080, 1084 (--) NVIDIA(0): VSyncEnd, VTotal : 1089, 1125 (--) NVIDIA(0): H/V Polarity : +/+ This is the actual mode selected: (from xorg.0.log) (--) NVIDIA(0): 1920 x 1080 @ 60 Hz (--) NVIDIA(0): Pixel Clock : 74.18 MHz (--) NVIDIA(0): HRes, HSyncStart : 1920, 2008 (--) NVIDIA(0): HSyncEnd, HTotal : 2052, 2200 (--) NVIDIA(0): VRes, VSyncStart : 1080, 1084 (--) NVIDIA(0): VSyncEnd, VTotal : 1094, 1124 (--) NVIDIA(0): H/V Polarity : +/+ (--) NVIDIA(0): Extra : Interlaced (--) NVIDIA(0): CEA Format : 5 So my HTPC is down-converting to 1080i and then the Monitor is up-converting to 1080p How can I fix this, please?

  Read the article

• New R Interface to Oracle Data Mining Available for Download

  - by charlie.berger

    The R Interface to Oracle Data Mining ( R-ODM) allows R users to access the power of Oracle Data Mining's in-database functions using the familiar R syntax. R-ODM provides a powerful environment for prototyping data analysis and data mining methodologies. R-ODM is especially useful for: Quick prototyping of vertical or domain-based applications where the Oracle Database supports the application Scripting of "production" data mining methodologies Customizing graphics of ODM data mining results (examples: classification, regression, anomaly detection) The R-ODM interface allows R users to mine data using Oracle Data Mining from the R programming environment. It consists of a set of function wrappers written in source R language that pass data and parameters from the R environment to the Oracle RDBMS enterprise edition as standard user PL/SQL queries via an ODBC interface. The R-ODM interface code is a thin layer of logic and SQL that calls through an ODBC interface. R-ODM does not use or expose any Oracle product code as it is completely an external interface and not part of any Oracle product. R-ODM is similar to the example scripts (e.g., the PL/SQL demo code) that illustrates the use of Oracle Data Mining, for example, how to create Data Mining models, pass arguments, retrieve results etc. R-ODM is packaged as a standard R source package and is distributed freely as part of the R environment's Comprehensive R Archive Network (CRAN). For information about the R environment, R packages and CRAN, see www.r-project.org. R-ODM is particularly intended for data analysts and statisticians familiar with R but not necessarily familiar with the Oracle database environment or PL/SQL. It is a convenient environment to rapidly experiment and prototype Data Mining models and applications. Data Mining models prototyped in the R environment can easily be deployed in their final form in the database environment, just like any other standard Oracle Data Mining model. What is R? R is a system for statistical computation and graphics. It consists of a language plus a run-time environment with graphics, a debugger, access to certain system functions, and the ability to run programs stored in script files. The design of R has been heavily influenced by two existing languages: Becker, Chambers & Wilks' S and Sussman's Scheme. Whereas the resulting language is very similar in appearance to S, the underlying implementation and semantics are derived from Scheme. R was initially written by Ross Ihaka and Robert Gentleman at the Department of Statistics of the University of Auckland in Auckland, New Zealand. Since mid-1997 there has been a core group (the "R Core Team") who can modify the R source code archive. Besides this core group many R users have contributed application code as represented in the near 1,500 publicly-available packages in the CRAN archive (which has shown exponential growth since 2001; R News Volume 8/2, October 2008). Today the R community is a vibrant and growing group of dozens of thousands of users worldwide. It is free software distributed under a GNU-style copyleft, and an official part of the GNU project ("GNU S"). Resources: R website / CRAN R-ODM

  Read the article

• Custom Templates: Using user exits

  - by Anthony Shorten

  One of the features of Oracle Utilities Application Framework V4.1 is the ability to use templates and user exits to extend the base configuration files. The configuration files used by the product are based upon a set of templates shipped with the product. When the configureEnv utility asks for configuration settings they are stored in a configuration file ENVIRON.INI which outlines the environment settings. These settings are then used by the initialSetup utility to populate the various configuration files used by the product using templates located in the templates directory of the installation. Now, whilst the majority of the installations at any site are non-production and the templates provided are generally adequate for that need, there are circumstances where extension of templates are needed to take advantage of more advanced facilities (such as advanced security and environment settings). The issue then becomes that if you alter the configuration files manually (directly or indirectly) then you may lose all your custom settings the next time you run initialSetup. To counter this we allow customers to either override templates with their own template or we now provide user exits in the templates to add fragments of configuration unique to that part of the configuration file. The latter means that the base template is still used but additions are included to provide the extensions. The provision of custom templates is supported but as soon as you use a custom template you are then responsible for reflecting any changes we put in the base template over time. Not a big task but annoying if you have to do it for multiple copies of the product. I prefer to use user exits as they seem to represent the least effort solution. The way to find the user exits available is to either read the Server Administration Guide that comes with your product or look at individual templates and look for the lines: #ouaf_user_exit <user exit name> Where <user exit name> is the name of the user exit. User exits are not always present but are in places that we feel are the most likely to be changed. If a user exit does not exist the you can always use a custom template instead. Now lets show an example. By default, the product generates a config.xml file to be used with Oracle WebLogic. This configuration file has the basic setting contained in it to manage the product. If you want to take advantage of the Oracle WebLogic advanced settings, you can use the console to make those changes and it will be reflected in the config.xml automatically. To retain those changes across invocations of initialSetup, you need to alter the template that generates the config.xml or use user exits. The technique is this. Make the change in the console and when you save the change, WebLogic will reflect it in the config.xml for you. Compare the old version and new version of the config.xml and determine what to add and then find the user exit to put it in by examining the base template. For example, by default, the console is not automatically deployed (it is deployed on demand) in the base config.xml. To make the console deploy, you can add the following line to the templates/CM_config.xml.win.exit_3.include file (for windows) or templates/CM_config.xml.exit_3.include file (for linux/unix): <internal-apps-deploy-on-demand-enabled>false</internal-apps-deploy-on-demand-enabled> Now run initialSetup to reflect the change and if you check the splapp/config/config.xml file you will see the change applied for you. Now how did I know which include file? I check the template for config.xml and found there was an user exit at the right place. I prefixed my include filename with "CM_" to denote it as a custom user exit. This will tell the upgrade tools to leave that file alone whenever you decide to upgrade (or even apply fixes). User exits can be powerful and allow customizations to be added for advanced configuration. You will see products using Oracle Utilities Application Framework use this exits themselves (usually prefixed with the product code). You are also taking advantage of them.

  Read the article

• TomEE Integration in NetBeans Next

  - by Geertjan

  At JavaOne 2013, there was a lot of buzz around the TomEE server, e.g., many Tweets, nice party, and a new TomEE consulting company. For those tracking TomEE developments, it is interesting to note that recently the NetBeans IDE development builds have had added to them... TomEE support. Note: The TomEE support described here is not in NetBeans IDE 7.4, but in development builds for the next release of NetBeans IDE.For example, with NetBeans IDE development builds you're able to: register TomEE as a server in the Services window (TomEE has several distributions, e.g., one can use the "with JAX-RS" one, for example) create a Java EE 6 web project (e.g., Maven based) against this server create JPA entities from database create JAX-RS classes from JPA entities create JSF pages from JPA entities the IDE lets you create a new data source for TomEE and deploy it to the server the IDE figures out the components that are already packaged in TomEE, and the fact that (unlike with regular Tomcat), it does not need to package any components such as JSF implementation, persistence provider, or JAX-RS runtime, so that the resulting WAR file is very small the IDE can also do "deploy on save" with TomEE, so that your development cycle is very fast Adam Bien blogged about how he set up TomEE sometime ago, here. The official support in NetBeans IDE will be much more tightly integrated, simplifying the steps Adam describes. For example, the IDE does step 2 from Adam's blog for you, i.e., it sets up TomEE deployment roles. Moreover, it knows about all the technologies included in TomEE so that it can optimize the packaging; it knows about TomEE's persistence setup; it can work with TomEE data sources, etc. Below you see a Maven-based Java EE 6 PrimeFaces application (all entities and JSF pages generated from a database) deployed to TomEE in NetBeans IDE: And here's the management console for configuring and finetuning TomEE in NetBeans IDE: When I tried out the NetBeans IDE development build and TomEE, to see how everything fits together, I was surprised at how fast TomEE started up. Not sure what they did to it, but seems like a server on steroids. And setting it up in NetBeans IDE was trivial. Add the simple set up of TomEE in NetBeans IDE to the many benefits that the widely praised out of the box NetBeans Maven tools make possible, together with the fact that not one single plugin had to be installed to get everything you see described here up and running... and you have a really powerful combination of dev tools, all for free.

  Read the article

• Is Oracle Policy Automation a Fit for My Agency? I'll bet it is.

  - by jeffrey.waterman

  Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Recently, I stumbled upon a new(-ish) whitepaper now posted on the Oracle Technology Network around Oracle Policy Automation (OPA). This paper is certain to become a must read for any customer interested in rules automation. What is OPA?  If you are not sitting in your favorite Greek restaurant waiting for that order of Saganaki to appear, OPA is Oracle’s solution for automated streamlining, standardizing, and the maintenance of policy. It is a specialized rules platform that simplifies the automation of rules and policies, putting the analysis in the hands of the analysts, not the IT organization. In other words, OPA allows the organization to be more efficient by eliminating (or at a minimum, reducing the engagement of) the middle man from the process. The whitepaper I mention above is titled, “Is Oracle Policy Automation a Good Fit for My Business?”. This short document walks the reader through use cases and advice for the reader to consider when deciding if OPA is right for their agency. The paper outlines many different scenarios, different uses of OPA in production today and, where OPA may not be a good fit. Many of the use case examples revolve around end user questionnaires or analyst research. What is often overlooked is OPA’s ability to act as a rules engine behind the scenes. That is, take inputs from one source (e.g., personnel data), process that data in OPA and send the output (e.g., pay data with benefits deductions) to a second source. The rules have been automated, no necessary human intervention to perform analysis. A few of my customers have used the embedded OPA solution to improve transaction processing and reduce the time spent analyzing exceptions. I suggest any reader whose organization is reliant on or deals with high complexity, volume or volatility in rules that are based on documentation – or which need to be documented – take a look at Oracle Policy Automation. You can find the white paper on Oracle Technology Network. You can find the white paper in the Oracle Policy Automation of the OTN. You can find more information around OPA on oracle.com. Finally, you can send me a question any time at [email protected] Thank you for reading. If you have any topics around Oracle Applications in the Federal or Public Sector industries you would like to see addressed in this blog, please leave suggestions in the comments section and I will do my best to address in a future post.

  Read the article

• SQL SERVER – Solution – User Not Able to See Any User Created Object in Tables – Security and Permissions Issue

  - by pinaldave

  There is an old quote “A Picture is Worth a Thousand Words”. I believe this quote immensely. Quite often I get phone calls that something is not working if I can help. My reaction is in most of the cases, I need to know more, send me exact error or a screenshot. Until and unless I see the error or reproduce the scenario myself I prefer not to comment. Yesterday I got a similar phone call from an old friend, where he was not sure what is going on. Here is what he said. “When I try to connect to SQL Server, it lets me connect just fine as well let me open and explore the database. I noticed that I do not see any user created instances but when my colleague attempts to connect to the server, he is able to explore the database as well see all the user created tables and other objects. Can you help me fix it? “ My immediate reaction was he was facing security and permission issue. However, to make the same recommendation I suggested that he send me a screenshot of his own SSMS and his friend’s SSMS. After carefully looking at both the screenshots, I was very confident about the issue and we were able to resolve the issue. Let us reproduce the same scenario and many there is some learning for us. Issue: User not able to see user created objects First let us see the image of my friend’s SSMS screen. (Recreated on my machine) Now let us see my friend’s colleague SSMS screen. (Recreated on my machine) You can see that my friend could not see the user tables but his colleague was able to do the same for sure. Now I believed it was a permissions issue. Further to this I asked him to send me another image where I can see the various permissions of the user in the database. My friends screen My friends colleagues screen This indeed proved that my friend did not have access to the AdventureWorks database and because of the same he was not able to access the database. He did have public access which means he will have similar rights as guest access. However, their SQL Server had followed my earlier advise on having limited access for guest access, which means he was not able to see any user created objects. My next question was to validate what kind of access my friend’s colleague had. He replied that the colleague is the admin of the server. I suggested that if my friend was suppose to have admin access to the database, he should request of having admin access to his colleague. My friend promptly asked for the same to his colleague and on following screen he added him as an admin. You can do the same using following T-SQL script as well. USE [AdventureWorks2012] GO ALTER ROLE [db_owner] ADD MEMBER [testguest] GO Once my friend was admin he was able to access all the user objects just like he was expecting. Please note, this complete exercise was done on a development server. One should not play around with security on live or production server. Security is such an issue, which should be left with only senior administrator of the server. Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: PostADay, SQL, SQL Authority, SQL Query, SQL Security, SQL Server, SQL Tips and Tricks, T SQL, Technology

  Read the article

• Indexed view deadlocking

  - by Dave Ballantyne

  Deadlocks can be a really tricky thing to track down the root cause of.  There are lots of articles on the subject of tracking down deadlocks, but seldom do I find that in a production system that the cause is as straightforward.  That being said,  deadlocks are always caused by process A needs a resource that process B has locked and process B has a resource that process A needs.  There may be a longer chain of processes involved, but that is the basic premise. Here is one such (much simplified) scenario that was at first non-obvious to its cause: The system has two tables,  Products and Stock.  The Products table holds the description and prices of a product whilst Stock records the current stock level. USE tempdb GO CREATE TABLE Product ( ProductID INTEGER IDENTITY PRIMARY KEY, ProductName VARCHAR(255) NOT NULL, Price MONEY NOT NULL ) GO CREATE TABLE Stock ( ProductId INTEGER PRIMARY KEY, StockLevel INTEGER NOT NULL ) GO INSERT INTO Product SELECT TOP(1000) CAST(NEWID() AS VARCHAR(255)), ABS(CAST(CAST(NEWID() AS VARBINARY(255)) AS INTEGER))%100 FROM sys.columns a CROSS JOIN sys.columns b GO INSERT INTO Stock SELECT ProductID,ABS(CAST(CAST(NEWID() AS VARBINARY(255)) AS INTEGER))%100 FROM Product There is a single stored procedure of GetStock: Create Procedure GetStock as SELECT Product.ProductID,Product.ProductName FROM dbo.Product join dbo.Stock on Stock.ProductId = Product.ProductID where Stock.StockLevel <> 0 Analysis of the system showed that this procedure was causing a performance overhead and as reads of this data was many times more than writes,  an indexed view was created to lower the overhead. CREATE VIEW vwActiveStock With schemabinding AS SELECT Product.ProductID,Product.ProductName FROM dbo.Product join dbo.Stock on Stock.ProductId = Product.ProductID where Stock.StockLevel <> 0 go CREATE UNIQUE CLUSTERED INDEX PKvwActiveStock on vwActiveStock(ProductID) This worked perfectly, performance was improved, the team name was cheered to the rafters and beers all round.  Then, after a while, something else happened… The system updating the data changed,  The update pattern of both the Stock update and the Product update used to be: BEGIN TRAN UPDATE... COMMIT BEGIN TRAN UPDATE... COMMIT BEGIN TRAN UPDATE... COMMIT It changed to: BEGIN TRAN UPDATE... UPDATE... UPDATE... COMMIT Nothing that would raise an eyebrow in even the closest of code reviews.  But after this change we saw deadlocks occuring. You can reproduce this by opening two sessions. In session 1 begin transaction Update Product set ProductName ='Test' where ProductID = 998 Then in session 2 begin transaction Update Stock set Stocklevel = 5 where ProductID = 999 Update Stock set Stocklevel = 5 where ProductID = 998 Hop back to session 1 and.. Update Product set ProductName ='Test' where ProductID = 999 Looking at the deadlock graphs we could see the contention was between two processes, one updating stock and the other updating product, but we knew that all the processes do to the tables is update them.  Period.  There are separate processes that handle the update of stock and product and never the twain shall meet, no reason why one should be requiring data from the other.  Then it struck us,  AH the indexed view. Naturally, when you make an update to any table involved in a indexed view, the view has to be updated.  When this happens, the data in all the tables have to be read, so that explains our deadlocks.  The data from stock is read when you update product and vice-versa. The fix, once you understand the problem fully, is pretty simple, the apps did not guarantee the order in which data was updated.  Luckily it was a relatively simple fix to order the updates and deadlocks went away.  Note, that there is still a *slight* risk of a deadlock occurring, if both a stock update and product update occur at *exactly* the same time.

  Read the article

< Previous Page | 373 374 375 376 377 378 379 380 381 382 383 384  | Next Page >