Search Results

Search found 10383 results on 416 pages for 'exact match'.

Page 378/416 | < Previous Page | 374 375 376 377 378 379 380 381 382 383 384 385  | Next Page >

  • How to set a key binding to make Emacs as transparent/opaque as I want?

    - by Vivi
    I want to have a command in Emacs to make it as opaque/transparent as I want (refer to the fabulous question that pointed out that transparency is possible in Emacs, and the EmacsWiki page linked there which has the code I am using below). The EmacsWiki code sets "C-c t" to toggle the previously set transparency on and off: ;;(set-frame-parameter (selected-frame) 'alpha '(<active> [<inactive>])) (set-frame-parameter (selected-frame) 'alpha '(85 50)) (add-to-list 'default-frame-alist '(alpha 85 50)) enter code here(eval-when-compile (require 'cl)) (defun toggle-transparency () (interactive) (if (/= (cadr (find 'alpha (frame-parameters nil) :key #'car)) 100) (set-frame-parameter nil 'alpha '(100 100)) (set-frame-parameter nil 'alpha '(85 60)))) (global-set-key (kbd "C-c t") 'toggle-transparency) What I would like to do is to be able to choose the % transparency when I am in Emacs. If possible, I would like a command where I type for example "C-c t N" (where N is the % opaqueness) for the active frame, and then "M-c t N" for the inactive window. If that can't be done like that, then maybe a command where if I type "C-c t" it asks me for the number which gives the opaqueness of the active window (and the same for the inactive window using "M-c t"). Thanks in advance for your time :) Below are just some comments that are not important to answer the question if you are not interested: I really want this because when I told my supervisor I was learning Emacs he said TexShop is much better and that I am using software from the 80's. I told him about the wonders of Emacs and he said TexShop has all of it and more. I matched everything he showed me except for the transparency (though he couldn't match the preview inside Emacs from preview-latex). I found the transparency thing by chance, and now I want to show him Emacs rules! I imagine this will be a piece of cake for some of you, and even though I could get it done if I spent enough time trying to learn lisp or reading around, I am not a programmer and I have only been using Emacs and a mac for a week. I am lost already as it is! So thanks in advance for your time and help - I will learn lisp eventually!

    Read the article

  • stop and split generated sequence at repeats - clojure

    - by fitzsnaggle
    I am trying to make a sequence that will only generate values until it finds the following conditions and return the listed results: case head = 0 - return {:origin [all generated except 0] :pattern 0} 1 - return {:origin nil :pattern [all-generated-values] } repeated-value - {:origin [values-before-repeat] :pattern [values-after-repeat] { ; n = int ; x = int ; hist - all generated values ; Keeps the head below x (defn trim-head [head x] (loop [head head] (if (> head x) (recur (- head x)) head))) ; Generates the next head (defn next-head [head x n] (trim-head (* head n) x)) (defn row [x n] (iterate #(next-head % x n) n)) ; Generates a whole row - ; Rows are a max of x - 1. (take (- x 1) (row 11 3)) Examples of cases to stop before reaching end of row: [9 8 4 5 6 7 4] - '4' is repeated so STOP. Return preceding as origin and rest as pattern. {:origin [9 8] :pattern [4 5 6 7]} [4 5 6 1] - found a '1' so STOP, so return everything as pattern {:origin nil :pattern [4 5 6 1]} [3 0] - found a '0' so STOP {:origin [3] :pattern [0]} :else if the sequences reaches a length of x - 1: {:origin [all values generated] :pattern nil} The Problem I have used partition-by with some success to split the groups at the point where a repeated value is found, but would like to do this lazily. Is there some way I can use take-while, or condp, or the :while clause of the for loop to make a condition that partitions when it finds repeats? Some Attempts (take 2 (partition-by #(= 1 %) (row 11 4))) (for [p (partition-by #(stop-match? %) head) (iterate #(next-head % x n) n) :while (or (not= (last p) (or 1 0 n) (nil? (rest p))] {:origin (first p) :pattern (concat (second p) (last p))})) # Updates What I really want to be able to do is find out if a value has repeated and partition the seq without using the index. Is that possible? Something like this - { (defn row [x n] (loop [hist [n] head (gen-next-head (first hist) x n) steps 1] (if (>= (- x 1) steps) (case head 0 {:origin [hist] :pattern [0]} 1 {:origin nil :pattern (conj hist head)} ; Speculative from here on out (let [p (partition-by #(apply distinct? %) (conj hist head))] (if-not (nil? (next p)) ; One partition if no repeats. {:origin (first p) :pattern (concat (second p) (nth 3 p))} (recur (conj hist head) (gen-next-head head x n) (inc steps))))) {:origin hist :pattern nil}))) }

    Read the article

  • NO FBML is working in iframe in facebook using PHP (ie or ff or anywhere else!)

    - by Cyprus106
    I have tried for three days now and gotten nowhere on this.... I absolutely can not get any "fb:" code to render anything! I've tried the exact code in the sandbox and it works fine. I've read through every search result I could find and gotten nowhere... I'm using a standard xd_receiver page, and in the body there's this line: < script src="http://static.ak.connect.facebook.com/js/api_lib/v0.4/XdCommReceiver.js" type="text/javascript"></script> Here's my index page. It's basically the stock facebook example code.... <?php require_once 'facebook-platform/php/facebook.php'; //Authentication Keys $appapikey = 'MY_KEY'; // obviously this is my real key $appsecret = 'MY_SECRET'; // same thing $facebook = new Facebook($appapikey, $appsecret); $user_id = $facebook->require_login(); ?> <html xmlns="http://www.w3.org/1999/xhtml" xmlns:fb="http://www.facebook.com/2008/fbml"> <head></head> <body> <script src="http://static.ak.connect.facebook.com/js/api_lib/v0.4/FeatureLoader.js.php" type="text/javascript"></script> <? echo "<p>Hello, <fb:name uid=\"$user_id\" useyou=\"false\"></fb:name>!</p>"; ?> <script type="text/javascript"> FB_RequireFeatures(["XFBML"], function(){ FB.Facebook.init("<?php echo $appapikey; ?>", "xd_receiver.htm"); }); </script> </body> </html> oddly enough, when I put this code below where it echos the logged in user's name, it does show the id numbers of friends. But again, it won't render their names <?php friends.get API method echo "<p>Friends:"; $friends = $facebook->api_client->friends_get(); $friends = array_slice($friends, 0, 25); foreach ($friends as $friend) { echo "<br>".$friend." - <fb:name uid=\".$user_id.\" useyou=\"false\"></fb:name>"; } echo "</p>"; ?> Here's my settings: Canvas Callback URL http://www.my-actual-website.com/test/ Canvas URL http://apps.facebook.com/gogre_testapp/ FBML/iframe iframe Application Type Website Post-Remove URL http://www.my-actual-website.com/test/ Post-Authorize URL http://www.my-actual-website.com/test/ Please, somebody help me out! I've been trying unsuccessfully for days

    Read the article

  • How can I tell groovy/grails not to try to "re-encode" binary data? (Revised title)

    - by ?????
    I have a groovy/grails application that needs to serve images It works fine on my dev box, the image is returned properly. Here's the start of the returned JPEG, as seen by od -cx 0000000 377 330 377 340 \0 020 J F I F \0 001 001 001 001 , d8ff e0ff 1000 464a 4649 0100 0101 2c01 but on the production box, there's some garbage in front, and the d8ff e0ff before the 1000 is missing 0000000 ? ** ** ? ** ** ? ** ** ? ** ** \0 020 J F bfef efbd bdbf bfef efbd bdbf 1000 464a 0000020 I F \0 001 001 001 \0 H \0 H \0 \0 ? ** ** ? 4649 0100 0101 4800 4800 0000 bfef efbd It's the exact same code. I just moved the .war over and run it on a different machine. (Isn't Java supposed to be write once, run everywhere?) Any ideas? An "encoding" problem? The code is sent to the response like this: response.contentType = "image/jpeg"; response.outputStream << out; Here's the code that locates the image on an internal application server and re-serves the image. I've pared down the code a bit to remove the error handling, etc, to make it easier to read. def show = { def address = "http://internal.application.server:9899/img?photoid=${params.id}" def out = new ByteArrayOutputStream() out << new URL(address).openStream() response.contentLength = out.size(); // XXX If you don't do this hack, "head" requests won't work! if (request.method == 'HEAD') { render( text : "", contentType : "image/jpeg" ); } else { response.contentType = "image/jpeg"; response.outputStream << out; } } Update: I tried setting the CharacterEncoding response.setCharacterEncoding("ISO-8859-1"); if (request.method == 'HEAD') { render( text : "", contentType : "image/jpeg" ); } else { response.contentType = "image/jpeg;charset=ISO-8859-1"; response.outputStream << out; } but it made no difference in the output. On my production machine, the binary bytes in the image are re-encoded/escaped as if they were UTF-8 (see Michael's explanation below). It works fine on my development machine.

    Read the article

  • Nice, clean, simple way of getting a dataset from ASP.NET to plain HTML jQuery or JavaScript library

    - by David S
    I know this is a probable open ended question, and I have tried looking around so much over the last year or two... maybe I am looking for a perfect place that doesn't exist! of course it's all about perception no less.. Anyway, just to clarify what I am trying to do and why: I want to be able to use (primarily for the moment) ASP.NET or services thereof to get a dataset - whatever the source data, I can obviously get a dataset of rows/Columns. I want to be able to, as simply as possible, get that data over to the client via xml/json/whatever, to then use in a "variety" of ways. "Variety" of ways meaning I would like to "easily" bind that data to say a grid, or a combo dropdown or just simply render to a textbox - BUT by referencing the dataset as I would say on the serverside. Now I know this all sounds simplistic, and I know there are lots of complications.. so I have tried the following so far over the last year or so: ExtJS - very good, nice solid framework, but just found it a bit too much to use in everyday basic apps - great if I was building a whole application with it Yahoo YUI - not looked recently, but I guess some of the concepts with ExtJS were similar? JQuery - of course to get data etc, it was ok, and I guess there are so many 3rd party plugins, that a mix and match might work? Adobe SPRY - ironically this was as close to getting a dataset style structure to Javascript/client, although it seemed to drop off/go quiet..? I maybe wrong.. I did have a very cursory play with Tibco GI and another one I cannot remember the name of! but again, it felt like it was great to build a whole app perhaps? Anyway, I am very amazed by all of the technologies coming out, and really not biased one way or the other, I really just want a very simple way of getting data from the server, and having a basic/very flexible way of working with that data in the client without using server technologies.. I need to keep the server flexible as I may need to use PHP, or java technologies not just .NET So again, sorry for the rambles, but if anyone out there has had a simple experience, or would like to share some ideas, it would be very welcomed!! David.

    Read the article

  • Advice on software / database design to avoid using cursors when updating database

    - by Remnant
    I have a database that logs when an employee has attended a course and when they are next due to attend the course (courses tend to be annual). As an example, the following employee attended course '1' on 1st Jan 2010 and, as the course is annual, is due to attend next on the 1st Jan 2011. As today is 20th May 2010 the course status reads as 'Complete' i.e. they have done the course and do not need to do it again until next year: EmployeeID CourseID AttendanceDate DueDate Status 123456 1 01/01/2010 01/01/2011 Complete In terms of the DueDate I calculate this in SQL when I update the employee's record e.g. DueDate = AttendanceDate + CourseFrequency (I pull course frequency this from a separate table). In my web based app (asp.net mvc) I pull back this data for all employees and display it in a grid like format for HR managers to review. This allows HR to work out who needs to go on courses. The issue I have is as follows. Taking the example above, suppose today is 2nd Jan 2011. In this case, employee 123456 is now overdue for the course and I would like to set the Status to Incomplete so that the HR manager can see that they need to action this i.e. get employee on the course. I could build a trigger in the database to run overnight to update the Status field for all employees based on the current date. From what I have read I would need to use cursors to loop over each row to amend the status and this is considered bad practice / inefficient or at least something to avoid if you can??? Alternatively, I could compute the Status in my C# code after I have pulled back the data from the database and before I display it on screen. The issue with this is that the Status in the database would not necessarily match what is shown on screen which just feels plain wrong to me. Does anybody have any advice on the best practice approach to such an issue? It helps, if I did use a cursor I doubt I would be looping over more than 1000 records at any given time. Maybe this is such small volume that using cursors is okay?

    Read the article

  • Write Scheme data structures so they can be eval-d back in, or alternative

    - by Jesse Millikan
    I'm writing an application (A juggling pattern animator) in PLT Scheme that accepts Scheme expressions as values for some fields. I'm attempting to write a small text editor that will let me "explode" expressions into expressions that can still be eval'd but contain the data as literals for manual tweaking. For example, (4hss->sexp "747") is a function call that generates a legitimate pattern. If I eval and print that, it becomes (((7 3) - - -) (- - (4 2) -) (- (7 2) - -) (- - - (7 1)) ((4 0) - - -) (- - (7 0) -) (- (7 2) - -) (- - - (4 3)) ((7 3) - - -) (- - (7 0) -) (- (4 1) - -) (- - - (7 1))) which can be "read" as a string, but will not "eval" the same as the function. For this statement, of course, what I need would be as simple as (quote (((7 3... but other examples are non-trivial. This one, for example, contains structs which print as vectors: pair-of-jugglers ; --> (#(struct:hand #(struct:position -0.35 2.0 1.0) #(struct:position -0.6 2.05 1.1) 1.832595714594046) #(struct:hand #(struct:position 0.35 2.0 1.0) #(struct:position 0.6 2.0500000000000003 1.1) 1.308996938995747) #(struct:hand #(struct:position 0.35 -2.0 1.0) #(struct:position 0.6 -2.05 1.1) -1.3089969389957472) #(struct:hand #(struct:position -0.35 -2.0 1.0) #(struct:position -0.6 -2.05 1.1) -1.8325957145940461)) I've thought of at least three possible solutions, none of which I like very much. Solution A is to write a recursive eval-able output function myself for a reasonably large subset of the values that I might be using. There (probably...) won't be any circular references by the nature of the data structures used, so that wouldn't be such a long job. The output would end up looking like `(((3 0) (... ; ex 1 `(,(make-hand (make-position ... ; ex 2 Or even worse if I could't figure out how to do it properly with quasiquoting. Solution B would be to write out everything as (read (open-input-string "(big-long-s-expression)")) which, technically, solves the problem I'm bringing up but is... ugly. Solution C might be a different approach of giving up eval and using only read for parsing input, or an uglier approach where the s-expression is used as directly data if eval fails, but those both seem unpleasant compared to using scheme values directly. Undiscovered Solution D would be a PLT Scheme option, function or library I haven't located that would match Solution A. Help me out before I start having bad recursion dreams again.

    Read the article

  • Can parser combination be made efficient?

    - by Jon Harrop
    Around 6 years ago, I benchmarked my own parser combinators in OCaml and found that they were ~5× slower than the parser generators on offer at the time. I recently revisited this subject and benchmarked Haskell's Parsec vs a simple hand-rolled precedence climbing parser written in F# and was surprised to find the F# to be 25× faster than the Haskell. Here's the Haskell code I used to read a large mathematical expression from file, parse and evaluate it: import Control.Applicative import Text.Parsec hiding ((<|>)) expr = chainl1 term ((+) <$ char '+' <|> (-) <$ char '-') term = chainl1 fact ((*) <$ char '*' <|> div <$ char '/') fact = read <$> many1 digit <|> char '(' *> expr <* char ')' eval :: String -> Int eval = either (error . show) id . parse expr "" . filter (/= ' ') main :: IO () main = do file <- readFile "expr" putStr $ show $ eval file putStr "\n" and here's my self-contained precedence climbing parser in F#: let rec (|Expr|) (P(f, xs)) = Expr(loop (' ', f, xs)) and shift oop f op (P(g, xs)) = let h, xs = loop (op, g, xs) loop (oop, f h, xs) and loop = function | ' ' as oop, f, ('+' | '-' as op)::P(g, xs) | (' ' | '+' | '-' as oop), f, ('*' | '/' as op)::P(g, xs) | oop, f, ('^' as op)::P(g, xs) -> let h, xs = loop (op, g, xs) let op = match op with | '+' -> (+) | '-' -> (-) | '*' -> (*) | '/' -> (/) | '^' -> pown loop (oop, op f h, xs) | _, f, xs -> f, xs and (|P|) = function | '-'::P(f, xs) -> let f, xs = loop ('~', f, xs) P(-f, xs) | '('::Expr(f, ')'::xs) -> P(f, xs) | c::xs when '0' <= c && c <= '9' -> P(int(string c), xs) My impression is that even state-of-the-art parser combinators waste a lot of time back tracking. Is that correct? If so, is it possible to write parser combinators that generate state machines to obtain competitive performance or is it necessary to use code generation?

    Read the article

  • iPhone reachability checking

    - by Sneakyness
    I've found several examples of code to do what I want (check for reachability), but none of it seems to be exact enough to be of use to me. I can't figure out why this doesn't want to play nice. I have the reachability.h/m in my project, I'm doing #import <SystemConfiguration/SystemConfiguration.h> And I have the framework added. I also have: #import "Reachability.h" at the top of the .m in which I'm trying to use the reachability. Reachability* reachability = [Reachability sharedReachability]; [reachability setHostName:@"http://www.google.com"]; // set your host name here NetworkStatus remoteHostStatus = [reachability remoteHostStatus]; if(remoteHostStatus == NotReachable) {NSLog(@"no");} else if (remoteHostStatus == ReachableViaWiFiNetwork) {NSLog(@"wifi"); } else if (remoteHostStatus == ReachableViaCarrierDataNetwork) {NSLog(@"cell"); } This is giving me all sorts of problems. What am I doing wrong? I'm an alright coder, I just have a hard time when it comes time to figure out what needs to be put where to enable what I want to do, regardless if I want to know what I want to do or not. (So frustrating) Update: This is what's going on. This is in my viewcontroller, which I have the #import <SystemConfiguration/SystemConfiguration.h> and #import "Reachability.h" set up with. This is my least favorite part of programming by far. FWIW, we never ended up implementing this in our code. The two features that required internet access (entering the sweepstakes, and buying the dvd), were not main features. Nothing else required internet access. Instead of adding more code, we just set the background of both internet views to a notice telling the users they must be connected to the internet to use this feature. It was in theme with the rest of the application's interface, and was done well/tastefully. They said nothing about it during the approval process, however we did get a personal phone call to verify that we were giving away items that actually pertained to the movie. According to their usually vague agreement, you aren't allowed to have sweepstakes otherwise. I would also think this adheres more strictly to their "only use things if you absolutely need them" ideaology as well. Here's the iTunes link to the application, EvoScanner.

    Read the article

  • Why does this PHP script interfere with my CSS layout?

    - by CT
    This page uses $_GET to grab an asset id and query a mysql database and return some information. If 'id' does not match anything, no results are displayed but the page looks fine. If 'id' is null an error would occur at $id = $_GET["id"] or die(mysql_error()); When this occurs, they page layout is not displayed correctly. How do I fix this? Bonus question: How would I get a message like "No matching results found" or something when the id does not match any id in the database or is null. Thank you. <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.1//EN" "http://www.w3.org/TR/xhtml11/DTD/xhtml11.dtd"> <html xmlns="http://www.w3.org/1999/xhtml"> <head> <meta http-equiv="Content-Type" content="text/html; charset=utf-8" /> <link rel="stylesheet" type="text/css" href="style.css" /> <title>Wagman IT Asset</title> </head> <body> <div id="page"> <div id="header"> <img src="images/logo.png" /> </div> </div> <div id="content"> <div id="container"> <div id="main"> <div id="menu"> <ul> <table width="100%" border="0"> <tr> <td><li><a href="index.php">Search Assets</a></li></td> <td><li><a href="browse.php">Browse Assets</a></li></td> <td><li><a href="add_asset.php">Add Asset</a></li></td> <td>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</td> </tr> </table> </ul> </div> <div id="text"> <ul> <li> <h1>View Asset</h1> </li> </ul> <table width="100%" border="0" cellpadding="2"> <?php //make database connect mysql_connect("localhost", "asset_db", "asset_db") or die(mysql_error()); mysql_select_db("asset_db") or die(mysql_error()); //get asset $id = $_GET["id"] or die(mysql_error()); //get type of asset $sql = "SELECT asset.type From asset WHERE asset.id = $id"; $result = mysql_query($sql) or die(mysql_error()); $row = mysql_fetch_assoc($result); $type = $row['type']; switch ($type){ case "Server": $sql = " SELECT asset.id ,asset.company ,asset.location ,asset.purchase_date ,asset.purchase_order ,asset.value ,asset.type ,asset.notes ,server.manufacturer ,server.model ,server.serial_number ,server.esc ,server.user ,server.prev_user ,server.warranty FROM asset LEFT JOIN server ON server.id = asset.id WHERE asset.id = $id "; $result = mysql_query($sql); while($row = mysql_fetch_assoc($result)) { echo "<tr><td>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</td><td>Asset ID:</td><td>"; $id = $row['id']; setcookie('id', $id); echo "$id</td></tr>"; echo "<tr<td>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</td><td>Company:</td><td>"; $company = $row['company']; setcookie('company', $company); echo "$company</td></tr>"; echo "<tr><td>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</td><td>Location:</td><td>"; $location = $row['location']; setcookie('location', $location); echo "$location</td></tr>"; echo "<tr><td>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</td><td>Purchase Date:</td><td>"; $purchase_date = $row['purchase_date']; setcookie('purchase_date', $purchase_date); echo "$purchase_date</td></tr>"; echo "<tr><td>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</td><td>Purchase Order:</td><td>"; $purchase_order = $row['purchase_order']; setcookie('purchase_order', $purchase_order); echo "$purchase_order</td></tr>"; echo "<tr><td>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</td><td>Value:</td><td>"; $value = $row['value']; setcookie('value', $value); echo "$value</td></tr>"; echo "<tr><td>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</td><td>Type:</td><td>"; $type = $row['type']; setcookie('type', $type); echo "$type</td></tr>"; echo "<tr><td>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</td><td>Notes:</td><td>"; $notes = $row['notes']; setcookie('notes', $notes); echo "$notes</td></tr>"; echo "<tr><td>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</td><td>Manufacturer:</td><td>"; $manufacturer = $row['manufacturer']; setcookie('manufacturer', $manufacturer); echo "$manufacturer</td></tr>"; echo "<tr><td>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</td><td>Model / Description:</td><td>"; $model = $row['model']; setcookie('model', $model); echo "$model</td></tr>"; echo "<tr><td>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</td><td>Serial Number / Service Tag:</td><td>"; $serial_number = $row['serial_number']; setcookie('serial_number', $serial_number); echo "$serial_number</td></tr>"; echo "<tr><td>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</td><td>Express Service Code:</td><td>"; $esc = $row['esc']; setcookie('esc', $esc); echo "$esc</td></tr>"; echo "<tr><td>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</td><td>User:</td><td>"; $user = $row['user']; setcookie('user', $user); echo "$user</td></tr>"; echo "<tr><td>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</td><td>Previous User:</td><td>"; $prev_user = $row['prev_user']; setcookie('prev_user', $prev_user); echo "$prev_user</td></tr>"; echo "<tr><td>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</td><td>Warranty:</td><td>"; $warranty = $row['warranty']; setcookie('warranty', $warranty); echo "$warranty</td></tr>"; } break; case "Laptop": $sql = " SELECT asset.id ,asset.company ,asset.location ,asset.purchase_date ,asset.purchase_order ,asset.value ,asset.type ,asset.notes ,laptop.manufacturer ,laptop.model ,laptop.serial_number ,laptop.esc ,laptop.user ,laptop.prev_user ,laptop.warranty FROM asset LEFT JOIN laptop ON laptop.id = asset.id WHERE asset.id = $id "; $result = mysql_query($sql); while($row = mysql_fetch_assoc($result)) { echo "<tr><td>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</td><td>Asset ID:</td><td>"; $id = $row['id']; setcookie('id', $id); echo "$id</td></tr>"; echo "<tr<td>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</td><td>Company:</td><td>"; $company = $row['company']; setcookie('company', $company); echo "$company</td></tr>"; echo "<tr><td>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</td><td>Location:</td><td>"; $location = $row['location']; setcookie('location', $location); echo "$location</td></tr>"; echo "<tr><td>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</td><td>Purchase Date:</td><td>"; $purchase_date = $row['purchase_date']; setcookie('purchase_date', $purchase_date); echo "$purchase_date</td></tr>"; echo "<tr><td>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</td><td>Purchase Order:</td><td>"; $purchase_order = $row['purchase_order']; setcookie('purchase_order', $purchase_order); echo "$purchase_order</td></tr>"; echo "<tr><td>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</td><td>Value:</td><td>"; $value = $row['value']; setcookie('value', $value); echo "$value</td></tr>"; echo "<tr><td>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</td><td>Type:</td><td>"; $type = $row['type']; setcookie('type', $type); echo "$type</td></tr>"; echo "<tr><td>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</td><td>Notes:</td><td>"; $notes = $row['notes']; setcookie('notes', $notes); echo "$notes</td></tr>"; echo "<tr><td>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</td><td>Manufacturer:</td><td>"; $manufacturer = $row['manufacturer']; setcookie('manufacturer', $manufacturer); echo "$manufacturer</td></tr>"; echo "<tr><td>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</td><td>Model / Description:</td><td>"; $model = $row['model']; setcookie('model', $model); echo "$model</td></tr>"; echo "<tr><td>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</td><td>Serial Number / Service Tag:</td><td>"; $serial_number = $row['serial_number']; setcookie('serial_number', $serial_number); echo "$serial_number</td></tr>"; echo "<tr><td>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</td><td>Express Service Code:</td><td>"; $esc = $row['esc']; setcookie('esc', $esc); echo "$esc</td></tr>"; echo "<tr><td>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</td><td>User:</td><td>"; $user = $row['user']; setcookie('user', $user); echo "$user</td></tr>"; echo "<tr><td>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</td><td>Previous User:</td><td>"; $prev_user = $row['prev_user']; setcookie('prev_user', $prev_user); echo "$prev_user</td></tr>"; echo "<tr><td>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</td><td>Warranty:</td><td>"; $warranty = $row['warranty']; setcookie('warranty', $warranty); echo "$warranty</td></tr>"; } break; case "Desktop": $sql = " SELECT asset.id ,asset.company ,asset.location ,asset.purchase_date ,asset.purchase_order ,asset.value ,asset.type ,asset.notes ,desktop.manufacturer ,desktop.model ,desktop.serial_number ,desktop.esc ,desktop.user ,desktop.prev_user ,desktop.warranty FROM asset LEFT JOIN desktop ON desktop.id = asset.id WHERE asset.id = $id "; $result = mysql_query($sql); while($row = mysql_fetch_assoc($result)) { echo "<tr><td>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</td><td>Asset ID:</td><td>"; $id = $row['id']; setcookie('id', $id); echo "$id</td></tr>"; echo "<tr<td>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</td><td>Company:</td><td>"; $company = $row['company']; setcookie('company', $company); echo "$company</td></tr>"; echo "<tr><td>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</td><td>Location:</td><td>"; $location = $row['location']; setcookie('location', $location); echo "$location</td></tr>"; echo "<tr><td>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</td><td>Purchase Date:</td><td>"; $purchase_date = $row['purchase_date']; setcookie('purchase_date', $purchase_date); echo "$purchase_date</td></tr>"; echo "<tr><td>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</td><td>Purchase Order:</td><td>"; $purchase_order = $row['purchase_order']; setcookie('purchase_order', $purchase_order); echo "$purchase_order</td></tr>"; echo "<tr><td>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</td><td>Value:</td><td>"; $value = $row['value']; setcookie('value', $value); echo "$value</td></tr>"; echo "<tr><td>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</td><td>Type:</td><td>"; $type = $row['type']; setcookie('type', $type); echo "$type</td></tr>"; echo "<tr><td>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</td><td>Notes:</td><td>"; $notes = $row['notes']; setcookie('notes', $notes); echo "$notes</td></tr>"; echo "<tr><td>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</td><td>Manufacturer:</td><td>"; $manufacturer = $row['manufacturer']; setcookie('manufacturer', $manufacturer); echo "$manufacturer</td></tr>"; echo "<tr><td>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</td><td>Model / Description:</td><td>"; $model = $row['model']; setcookie('model', $model); echo "$model</td></tr>"; echo "<tr><td>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</td><td>Serial Number / Service Tag:</td><td>"; $serial_number = $row['serial_number']; setcookie('serial_number', $serial_number); echo "$serial_number</td></tr>"; echo "<tr><td>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</td><td>Express Service Code:</td><td>"; $esc = $row['esc']; setcookie('esc', $esc); echo "$esc</td></tr>"; echo "<tr><td>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</td><td>User:</td><td>"; $user = $row['user']; setcookie('user', $user); echo "$user</td></tr>"; echo "<tr><td>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</td><td>Previous User:</td><td>"; $prev_user = $row['prev_user']; setcookie('prev_user', $prev_user); echo "$prev_user</td></tr>"; echo "<tr><td>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</td><td>Warranty:</td><td>"; $warranty = $row['warranty']; setcookie('warranty', $warranty); echo "$warranty</td></tr>"; } break; } ?> </table> <br /> <br /> <table width="100%" border="0"> <tr> <td>&nbsp;</td> <td>&nbsp;</td> <td>&nbsp;</td> <td><a href="#">Add Software</a></td> <td><a href="#">Edit Asset</a></td> <td><a href="#">Delete Asset</a></td> </tr> </table> </div> </div> </div> <div class="clear"></div> <div id="footer" align="center"> <p>&nbsp;</p> </div> </div> <div id="tagline"> Wagman Construction - Bridging Generations since 1902 </div> </body> </html>

    Read the article

  • C++: compute a number's complement and its number of possible mismatches

    - by Eagle
    I got a bit stuck with my algorithm and I need some help to solve my problem. I think an example would explain better my problem. Assuming: d = 4 (maximum number of allowed bits in a number, 2^4-1=15). m_max = 1 (maximum number of allowed bits mismatches). kappa = (maximum number of elements to find for a given d and m, where m in m_max) The main idea is for a given number, x, to compute its complement number (in binary base) and all the possible combinations for up to m_max mismatches from x complement's number. Now the program start to scan from i = 0 till 15. for i = 0 and m = 0, kappa = \binom{d}{0} = 1 (this called a perfect match) possible combinations in bits, is only 1111 (for 0: 0000). for i = 0 and m = 1, kappa = \binom{d}{1} = 4 (one mismatch) possible combinations in bits are: 1000, 0100, 0010 and 0001 My problem was to generalize it to general d and m. I wrote the following code: #include <stdlib.h> #include <iomanip> #include <boost/math/special_functions/binomial.hpp> #include <iostream> #include <stdint.h> #include <vector> namespace vec { typedef std::vector<unsigned int> uint_1d_vec_t; } int main( int argc, char* argv[] ) { int counter, d, m; unsigned num_combination, bits_mask, bit_mask, max_num_mismatch; uint_1d_vec_t kappa; d = 4; m = 2; bits_mask = 2^num_bits - 1; for ( unsigned i = 0 ; i < num_elemets ; i++ ) { counter = 0; for ( unsigned m = 0 ; m < max_num_mismatch ; m++ ) { // maximum number of allowed combinations num_combination = boost::math::binomial_coefficient<double>( static_cast<unsigned>( d ), static_cast<unsigned>(m) ); kappa.push_back( num_combination ); for ( unsigned j = 0 ; j < kappa.at(m) ; j++ ) { if ( m == 0 ) v[i][counter++] = i^bits_mask; // M_0 else { bit_mask = 1 << ( num_bits - j ); v[i][counter++] = v[i][0] ^ bits_mask } } } } return 0; } I got stuck in the line v[i][counter++] = v[i][0] ^ bits_mask since I was unable to generalize my algorithm to m_max1, since I needed for m_max mismatches m_max loops and in my original problem, m is unknown until runtime.

    Read the article

  • a question about rails general practice with REST, json, and ajax

    - by Nik
    Hi all, I have this question concerning REST I think: I have read a few rest tutorials and the feeling I get from them is that each action in a restful controller tends to be lean and almost single purpose: "Index gives off a collection of a model show gives off one model edit/new a prep place for changing/create a model update/create changes and makes new model deletes removes one model" After reading all these tutorials, rest seems to be to be a means to create an interface for a model, much like active resource type of thing. the mantra seems to be "controller provides data and data only and is also pretty convention over configuration, so expect projects_path to return a bunch of projects" I can understand that, and I like the cleanliness. But here's when I run into some trouble in reality in applying these guidelines: say three models, Project with attrib title, User with attrib name, and Location with attrib address. Say in views/users/index.html.erb, I want to use Ajax to fetch and display a project in a div#project_display when the user clicks on a project element, I know that I can use views/projects/show.js.rjs like this: page.replace_html 'project_display' "#{@project.name}" where in the projects_controller.rb def show @project = Project.find(params[:id]) repsond_to do |format| format.js and other formats... end end I have no problem in doing that for a couple of years now. BUT doesn't that mean that my JS response for the project#show action is LOCkED to present data to div#project_display element and show only whatever I that rjs template says it should show? That's very limiting and doesn't sound very "interface" like. I have never used JSON before or much XML, so I thought, maybe the JS response should send back raw stuff, like JSON and somehow the page on which the ajax request was called has the instruction on what do to with these raw data. That sounds a lot more flexible, doesn't it? Because look back at that exmpale, what if in the views/locations/index.html.erb, I want to do the exact same thing except I want to put the response in div#project_goes_here and the response should be #{project.name} I know this is a trivial change but that's the point: the RJS only allows one template at a time. So I think the JSON route is the way to go, but how does the already loaded page, the one that the ajax call came from, know when or how to "look forward" to incoming data? I read that PrototypeJS has this template thing, I wouldn't mind using it with JSON, but if you can demonstrate this or other means for displaying received-from-ajax data, I am all attention. Thank You

    Read the article

  • Direct show video renderers suck?

    - by Daniel
    So I've been looking into the world of media playback for windows and I've started making a C# Media Player using DirectShow. I started off using the VRM-7 windowed video renderer and it was brilliant except it had a couple of small problems (multi monitors, fullscreen). But after some research I found that it's deprecated and I should be using VRM9. So I changed it to use VRM9 windowless then found out that was an old post rofl _< so finally I'm using Vista/Win7 (or XP .net 3) Enhanced Video Renderer (EVR) which is apparently the most up to date Microsoft video renderer and has all the flashy performance/quality things added to it. (tbh I haven't noticed any difference but maybe I need a blue-ray or HQ video to notice it). With using EVR everything is working fine except resizing the video. Its really laggy/choppy/teary and problem something to do with its frame queueing mechanism. To demonstrate my problem open up windows media player classic. View - Options - Playback - output Chose the "EVR" DirectShow Video renderer Now restart wmp class and play a video, while it's playing click and drag a corner to resize it. You'll notice its horribly laggy. This is the exact same problem i am having. But if you chose "EVR Custom Pres. *" or EVR Sync *" resizing works beautifully! So i tried googling around for anything about EVR resizing issues and how to fix it but i couldn't believe how little i could find. I'm guessing "Custom Pres." stands for "Custom Presenter" which sounds like they made their own. Also you'll notice on the right hand size when you swap between EVR and the other EVR's the Resizer drop down on the right greys out. So basically I wan't to know how I can fix this retarded resizing problem and is there any decent documentation out there? There is a fair bit for VMR7/9 but not much for EVR. I downloaded the DirectX SDK which apparently has samples but it was a waste of 500mb of bandwidth as it had nothing relevant. Perhaps there is some way to force it not queueing up frames if that is the problem? If you want code say the word and I'll paste some in. But it's really quite simple and nothing much happens, i'm convinced it's a problem with the EVR renderer. EDIT: Oh and one other thing, what does VLC use? If you go into vlc options and change the renderer to anything but default, they all suck. So is it using VMR7? Or its own?

    Read the article

  • Managing multiple AJAX calls to PHP scripts

    - by relativelycoded
    I have a set of 5 HTML dropdowns that act as filters for narrowing results returned from a mySQL database. The three pertinent filters are for "Province", "Region", and "City" selection, respectively. I have three functions: findSchools(), which runs when any of the filters (marked with CSS class .filter) are changed, and fetches the results via AJAX from a PHP script. Once that is done, two other functions are called... changeRegionOptions(), which, upon changing the "Province" filter, and updates the available options using the same method as the first function, but posting to a different script. changeCityOptions(), which runs if the "Region" filter was changed, and updates options, again using the same method. The problem is that since I want these AJAX functions to run simultaneously, and they by nature run asynchronously, I've tried using $.when to control the execution of the functions, but it doesn't fix the problem. The functions run, but the Region and City filters return blank (no options); the FireBug report shows absolutely no output, even though the POST request went through. The posted parameter for filter_province gets sent normally, but the one for region gets cut off at the end -- it sends as filter_region=, with no value passed. So I'm presuming my logic is wrong somewhere. The code is below: // When any of the filters are changed, let's query the database... $("select.filter").change(function() { findSchools(); }); // First, we see if there are any results... function findSchools() { var sch_province = document.filterform.filter_province.value; var sch_region = document.filterform.filter_region.value; var sch_city = document.filterform.filter_city.value; var sch_cat = document.filterform.filter_category.value; var sch_type = document.filterform.filter_type.value; $.post("fetch_results.php", { filter_province : sch_province, filter_region : sch_region, filter_city : sch_city, filter_category : sch_cat, filter_type : sch_type }, function(data) { $("#results").html(""); $("#results").hide(); $("#results").html(data); $("#results").fadeIn(600); } ); // Once the results are fetched, we want to see if the filter they changed was the one for Province, and if so, update the Region and City options to match that selection... $("#filter_province").change(function() { $.when(findSchools()) .done(changeRegionOptions()); $.when(changeRegionOptions()) .done(changeCityOptions()); }); }; This is just one of the ways I've tried to solve it; I've tried using an IF statement, and tried calling the functions directly inside the general select.filter.change() function (after findSchools(); ), but they all return the same result. Any help with this would be great!

    Read the article

  • DirectShow EVR resizing window problem

    - by Daniel
    So I've been looking into the world of media playback for windows and I've started making a C# Media Player using DirectShow. I started off using the VRM-7 windowed video renderer and it was brilliant except it had a couple of small problems (multi monitors, fullscreen). But after some research I found that it's deprecated and I should be using VRM9. So I changed it to use VRM9 windowless then found out that was an old post rofl _< so finally I'm using Vista/Win7 (or XP .net 3) Enhanced Video Renderer (EVR) which is apparently the most up to date Microsoft video renderer and has all the flashy performance/quality things added to it. (tbh I haven't noticed any difference but maybe I need a blue-ray or HQ video to notice it). With using EVR everything is working fine except resizing the video. Its really laggy/choppy/teary and probably something to do with its frame queueing mechanism. To demonstrate my problem open up windows media player classic. View - Options - Playback - output Chose the "EVR" DirectShow Video renderer Now restart wmp class and play a video, while it's playing click and drag a corner to resize it. You'll notice its horribly laggy. This is the exact same problem i am having. But if you chose "EVR Custom Pres. *" or EVR Sync *" resizing works beautifully! So i tried googling around for anything about EVR resizing issues and how to fix it but i couldn't believe how little i could find. I'm guessing "Custom Pres." stands for "Custom Presenter" which sounds like they made their own. Also you'll notice on the right hand size when you swap between EVR and the other EVR's the Resizer drop down on the right greys out. So basically I wan't to know how I can fix this retarded resizing problem and is there any decent documentation out there? There is a fair bit for VMR7/9 but not much for EVR. I downloaded the DirectX SDK which apparently has samples but it was a waste of 500mb of bandwidth as it had nothing relevant. Perhaps there is some way to force it not queueing up frames if that is the problem? If you want code say the word and I'll paste some in. But it's really quite simple and nothing much happens, i'm convinced it's a problem with the EVR renderer. EDIT: Oh and one other thing, what does VLC use? If you go into vlc options and change the renderer to anything but default, they all suck. So is it using VMR7? Or its own?

    Read the article

  • Another C datatypes question

    - by b-gen-jack-o-neill
    Hello. Well, I completely get the most basic datatypes of C, like short, int, long, float, to be exact, all numerical types.These types are needed to be known perform right operations with right numbers. For example to use FPU to add two float numbers. So the compiler must know what the type is. But, when it comes to characters I am little bit off. I know that basic C datatype char is there for ASCII characters coding. But what I don´t know is, why you even need another datatype for characters. Why could not you just use 1 byte integer value to store ASCII character. If you call printf, you apecify the datatype in the call, so you could say to printf that the integer represents ASCII character. I dont know how cout resolves datatype, but I guess you could just specify it somehow. Another thing is, when you want to use Unicode, you must use datatype wchar. But, what if I would like to use some another, for example ISO, or Windows coding instead of UTF? Becouse wchar codes characters as UTF-16 or UTF-32 (I read its compiler specific). And, what if I would want to use for example some imaginary new 8 byte text coding? What datatype should I use for it? I am actually pretty confused of this, becouse I always expected that if I want to use UTF-32 instead of ASCII, I just tell compiler "get UTF-32 value of the character I typed and save it into 4 char field." I thought that text coding is to be dealt with by the end, print function for example. That I just need to specify the coding for the compiler to use, since Windows doesent use ASCII in win32 apps, I guess C compiler must convert the char I typed to ASCII from whatever the type is that windows sends to the C editor. And the last thing is, what if I want to use for example 25 Byte integer for some high math operations? C has no specify-yourself datatype. Yes, I know that this would be difficult since all the math operations would need to be changed, becouse CPU can not add 25 Bytes numbers together. But is there a way to do it? Or is there some math library for it? What if I want to compute Pi to 1000000000000000 digits? :) I know my question is pretty long, but I just wanted to explain my thoughts the best I can in English, since its not my native language it is difficult. And I believe there is simple answer to my question(s), something I missed that explains everything. I read lot about text coding, C tutorials, but nothing about his. Thank you for your time.

    Read the article

  • Wrong sessionID being used in callback, but only on one particular computer

    - by user210119
    I am writing a Python/Django web application that uses OAuth (for the TwitterAPI, not that it should matter). I am storing a session ID in my login function, and then after using OAuth to get the user's token, I try to retrieve the sessionID in my callback function. The callback function then always fails(throws an exception) because it can't find the OAuth token in the session. Through the debugger, I am able to determine that the session ID that the server is using is incorrect - it does not match the session ID that was stored in the login function. It's therefore unsurprising that the Oauth tokens were not there. The session that appears in the callback was the same one each time (until I tried deleting it - see "things I've tried below"), and it started out as an old session, with some data in it that is from a different django app running on the same server that I hadn't touched in a couple weeks. Here's the kicker: everything I described is an issue only on our production server, and only when connecting to it from my computer. Let me clarify: this only happens with my particular laptop. I can connect to the app just fine from someone else's computer. Other people cannot connect with their accounts on my computer. Furthmore, I can connect just fine to the app when it is running on my localhost using the built-in django webserver, just not to the production server. My setup: my server and local box are running= Django 1.2.0 and Python 2.6.5. My local box is running Snow Leopard and the Django webserver, the server is running Ubuntu, Apache2, and mod-wsgi. For sessions, I am using Django's default session backend (DB). Things I have tried, all to no avail: logging in with a different account, including new accounts that have never OAuthed to this app before Clearing cookies, using incognito mode, using a different web browser on my same computer. Each time, upon inspecting my cookies, the sessionID matched the sessionID in the login function and was different from the sessionID in the callback. deleting the session in the database that appears in the callback function, (the one that appeared to be old data). The callback function still fails, and the sessionID it appears to be using is now a new one using a different session backend (DB-cache, flat file, etc...) restarting the server, my computer, etc. My first question on StackOverflow, so bear with me if I didn't quite follow local conventions. I am just at a loss as to what to even look for - what are the things that could possibly be causing sessions to not work on my particular computer, and (so far!) only my particular computer?

    Read the article

  • php array code with regular expressions

    - by user551068
    there are few mistakes which it is showing as Warning: preg_match() [function.preg-match]: Delimiter must not be alphanumeric or backslash in array 4,9,10,11,12... can anyone resolve them <?PHP $hosts = array( array("ronmexico.kainalopallo.com/","beforename=$F_firstname%20$F_lastname&gender=$F_gender","Your Ron Mexico Name is ","/the ultimate disguise, is <u><b>([^<]+)<\/b><\/u>/s"), array("www.fjordstone.com/cgi-bin/png.pl","gender=$F_gender&submit=Name%20Me","Your Pagan name is ","/COLOR=#000000 SIZE=6> *([^<]*)<\/FONT>/"), array("rumandmonkey.com/widgets/toys/mormon/index.php","gender=$F_gender&firstname=$F_firstname&surname=$F_lastname","Your Mormon Name is ","/<p>My Mormon name is <b>([^<]+)<\/b>!<br \/>/s"), array("cyborg.namedecoder.com/index.php","acronym=$F_firstname&design=edox&design_click-edox.x=0&design_click-edox.y=0&design_click-edox=edo","","Your Cyborg Name is ","/<p>([^<]+)<\/p>/"), array("rumandmonkey.com/widgets/toys/namegen/10/","nametype=$brit&page=2&id=10&submit=God%20save%20the%20Queen!&name=$F_firstname%20$F_lastname","Your Very British Name is ","/My very British name is \&lt\;b\&gt;([^&]+)\&lt;\/b\&gt;\.\&lt;br/"), array("blazonry.com/name_generator/usname.php","realname=$F_firstname+$F_lastname&gender=$F_gender","Your U.S. Name is ","/also be known as <font size=\'\+1\'><b>([^<]+)<\/b>/s"), array("www.spacepirate.org/rogues.php","realname=$F_firstname%20$F_lastname&formentered=Yes&submit=Arrrgh","Your Space Pirate name is ","/Your pirate name is <font size=\'\+1\'><b>([^<]+)<\/b><\/font>/s"), array("rumandmonkey.com/widgets/toys/ghetto/","firstname=$F_firstname&lastname=$F_lastname","Your Ghetto Name is ","/<p align=\"center\" style=\"font-size: 36px\">\s*<br \/>\s*([^<]*)<br \/>/"), array("www.emmadavies.net/vampire/default.aspx","mf=$emgender&firstname=$F_firstname&lastname=$F_lastname&submit=Find+My+Vampire+Name","","Your Vampire Name is ","/<i class=\"vampirecontrol vampire name\">([^<]*)<\/i>/"), array("www.emmadavies.net/fairy/default.aspx","mf=$emgender&firstname=$F_firstname&lastname=$F_lastname&submit=Seek+Fairy","","Your Fairy Name is ","/<i class=\'ng fairy name\'>([^<]*)<\/i>/"), array("www.irielion.com/israel/reggaename.html","phase=3&oldname=$F_firstname%20$F_lastname&gndr=$reggender","","Your Rasta Name is ","/Yes I, your irie new name is ([^\n]*)\n/"), array("www.ninjaburger.com/fun/games/ninjaname/ninjaname.php","realname=$F_firstname+$F_lastname","Your Ninja Burger Name is ","/<BR>Ninja Burger ninja name will be<BR><BR><FONT SIZE=\'\+1\'>([^<]*)<\/FONT>/"), array("gangstaname.com/pirate_name.php","sex=$F_gender&name=$F_firstname+$F_lastname","Your Pirate Name is ","/<p><strong>We\'ll now call ye:<\/strong><\/p> *<h2 class=\"newName\">([^<]*)<\/h2>/"), array("www.xach.com/nerd-name/","name=$F_firstname+$F_lastname&gender=$F_gender","Your Nerd Name is ","/<p><div align=center class=\"nerdname\">([^<]*)<\/div>/"), array("rumandmonkey.com/widgets/toys/namegen/5941/","page=2&id=5941&nametype=$dj&name=$F_firstname+$F_lastname","Your DJ Name is ","/My disk spinnin nu name is &lt\;b&gt\;([^<]*)&lt\;\/b&gt\;\./"), array("pizza.sandwich.net/poke/pokecgi.cgi","name=$F_firstname%20$F_lastname&color=black&submit=%20send%20","Your Pokename is ","/Your Pok&eacute;name is: <h1>([^<]*)<\/h1>/") ); return $hosts; ?>

    Read the article

  • Stuck on an ASP.NET/WCF WSDL Parsing Error

    - by Vaccano
    I have a WCF Web Service that my ASP.NET app uses. It has been working fine for quite some time. I just added in a Dev Express Grid (and the Dev Express DLLs) and a new page that uses them and now I am getting parsing errors on the WSDL. But the weird part is that it works fine on my machine but fails on the web server machine. (Both are connecting to the same web services WSDL.) Here is the error message I am getting: Server Error in '/MyWebAppWebDev' Application. -------------------------------------------------------------------------------- Parser Error Description: An error occurred during the parsing of a resource required to service this request. Please review the following specific parse error details and modify your source file appropriately. Parser Error Message: Reference.svcmap: Failed to generate code for the service reference 'MyWebAppService'. Cannot import wsdl:portType Detail: An exception was thrown while running a WSDL import extension: System.ServiceModel.Description.DataContractSerializerMessageContractImporter Error: Referenced type 'WebClientApp.MyWebAppService.ReferenceUpdatesDataContract, WebClientApp, Version=1.0.0.0, Culture=neutral, PublicKeyToken=null' with data contract name 'ReferenceUpdatesDataContract' in namespace 'http://schemas.datacontract.org/2004/07/MyWebAppServiceLibrary.DataContracts' cannot be used since it does not match imported DataContract. Need to exclude this type from referenced types. XPath to Error Source: //wsdl:definitions[@targetNamespace='http://tempuri.org/']/wsdl:portType[@name='IMyWebAppReferenceDataServiceLib'] Cannot import wsdl:binding Detail: There was an error importing a wsdl:portType that the wsdl:binding is dependent on. XPath to wsdl:portType: //wsdl:definitions[@targetNamespace='http://tempuri.org/']/wsdl:portType[@name='IMyWebAppReferenceDataServiceLib'] XPath to Error Source: //wsdl:definitions[@targetNamespace='http://tempuri.org/']/wsdl:binding[@name='MyWebAppServicesDefaultEndpoint'] Cannot import wsdl:port Detail: There was an error importing a wsdl:binding that the wsdl:port is dependent on. XPath to wsdl:binding: //wsdl:definitions[@targetNamespace='http://tempuri.org/']/wsdl:binding[@name='MyWebAppServicesDefaultEndpoint'] XPath to Error Source: //wsdl:definitions[@targetNamespace='http://tempuri.org/']/wsdl:service[@name='MyWebAppReferenceDataServiceLib']/wsdl:port[@name='MyWebAppServicesDefaultEndpoint'] Source Error: [No relevant source lines] Source File: /MyWebAppWebDev/App_WebReferences/MyWebAppService/ Line: 1 I am completely stumped on this. I have checked my web.config endpoint address and it is spot on (and notably is not in the error message above). Any ideas would be welcomed. Things I have tried: Giving permissions to C:\Windows\temp to my Website user name Giving permissions to C:\Windows\temp to my App pool user name Checking to see that none of my data contracts are generic and have IsReference=true in them.

    Read the article

  • downloaded zip file returns zero has 0 bytes as size

    - by Yaw Reuben
    I have written a Java web application that allows a user to download files from a server. These files are quite large and so are zipped together before download. It works like this: 1. The user gets a list of files that match his/her criteria 2. If the user likes a file and wants to download he/she selects it by checking a checkbox 3. The user then clicks "download" 4. The files are then zipped and stored on a server 5. The user this then presented with a page which contains a link to the downloadable zip file 6. However on downloading the zip file the file that is downloaded is 0 bytes in size I have checked the remote server and the zip file is being created properly, all that is left is to serve the file the user somehow, can you see where I might be going wrong, or suggest a better way to serve the zip file. The code that creates the link is: <% String zipFileURL = (String) request.getAttribute("zipFileURL"); %> <p><a href="<% out.print(zipFileURL); %> ">Zip File Link</a></p> The code that creates the zipFileURL variable is: public static String zipFiles(ArrayList<String> fileList, String contextRootPath) { //time-stamping Date date = new Date(); Timestamp timeStamp = new Timestamp(date.getTime()); Iterator fileListIterator = fileList.iterator(); String zipFileURL = ""; try { String ZIP_LOC = contextRootPath + "WEB-INF" + SEP + "TempZipFiles" + SEP; BufferedInputStream origin = null; zipFileURL = ZIP_LOC + "FITS." + timeStamp.toString().replaceAll(":", ".").replaceAll(" ", ".") + ".zip"; FileOutputStream dest = new FileOutputStream(ZIP_LOC + "FITS." + timeStamp.toString().replaceAll(":", ".").replaceAll(" ", ".") + ".zip"); ZipOutputStream out = new ZipOutputStream(new BufferedOutputStream( dest)); // out.setMethod(ZipOutputStream.DEFLATED); byte data[] = new byte[BUFFER]; while(fileListIterator.hasNext()) { String fileName = (String) fileListIterator.next(); System.out.println("Adding: " + fileName); FileInputStream fi = new FileInputStream(fileName); origin = new BufferedInputStream(fi, BUFFER); ZipEntry entry = new ZipEntry(fileName); out.putNextEntry(entry); int count; while ((count = origin.read(data, 0, BUFFER)) != -1) { out.write(data, 0, count); } origin.close(); } out.close(); } catch (Exception e) { e.printStackTrace(); } return zipFileURL; }

    Read the article

  • error loading (TypeLoadException) on asp.net/xsp/mono on debian/opensuse

    - by acidzombie24
    When i reset apache and load my website i get the first error below. I have no idea what the problem is. If i reload the page again (without restarting apache) i get the 2nd error, probably because the first error occurred and BaseUser is the first class/func that Application_Start uses. Why am i getting this load exception? Whats messed up is i tried using mono's VMWare img to debug it and i got the very same exception (until i restarted which now refuses to give me anything but 404 errors). However when i use mono develop to run the project the site runs PERFECT. WTF. Any ideas? Server Error in '/' Application A type load exception has occurred. Description: HTTP 500. Error processing request. Stack Trace: System.TypeLoadException: A type load exception has occurred. at (wrapper managed-to-native) System.Reflection.MonoMethod:InternalInvoke (System.Reflection.MonoMethod*,object,object[],System.Exception&) at System.Reflection.MonoMethod.Invoke (System.Object obj, BindingFlags invokeAttr, System.Reflection.Binder binder, System.Object[] parameters, System.Globalization.CultureInfo culture) [0x00000] in <filename unknown>:0 Version information: Mono Runtime Version: 2.8.1 (tarball Mon Dec 27 10:20:03 UTC 2010); ASP.NET Version: 2.0.50727.1433 Second: Server Error in '/' Application Could not load type 'mynamespace.BaseUser' from assembly 'mynamespace, Version=1.0.0.0, Culture=neutral, PublicKeyToken=null'. Description: HTTP 500. Error processing request. Stack Trace: System.TypeLoadException: Could not load type 'mynamespace.BaseUser' from assembly 'mynamespace, Version=1.0.0.0, Culture=neutral, PublicKeyToken=null'. at mynamespace.Global.Application_Start (System.Object sender, System.EventArgs e) [0x00000] in <filename unknown>:0 at (wrapper managed-to-native) System.Reflection.MonoMethod:InternalInvoke (System.Reflection.MonoMethod*,object,object[],System.Exception&) at System.Reflection.MonoMethod.Invoke (System.Object obj, BindingFlags invokeAttr, System.Reflection.Binder binder, System.Object[] parameters, System.Globalization.CultureInfo culture) [0x00000] in <filename unknown>:0 Version information: Mono Runtime Version: 2.8.1 (tarball Mon Dec 27 10:20:03 UTC 2010); ASP.NET Version: 2.0.50727.1433 -edit- i'll mention that i tried MonoDevelops build of my site on both opensuse and my website and i get the exact same problem.

    Read the article

  • Why do some questions get closed for no reason? [closed]

    - by IVlad
    Recently there was a question asking about generating all subsets of a set using a stack and a queue, which was closed (and now deleted it seems) as not a real question for no good reason, since it didn't fit into any of these conditions: It's difficult to tell what is being asked here. No, it was clear what was being asked. This question is ambiguous, vague, incomplete, or rhetorical and cannot be reasonably answered in its current form. Not ambiguous, not vague, not incomplete, definitely not rhetorical and could easily be answered if one knew the solution. Now, the exact same thing has happened with this question: http://stackoverflow.com/questions/2791982/a-shortest-path-problem-with-superheroes-and-intergalactic-journeys/2793746#2793746 I am interested in hearing a logical argument for why that question is either ambiguous, vague, incomplete, rhetorical or cannot reasonably be answered in its current form. It seems that (the same bunch of) people like to close questions that they think are homework questions, especially when they think people want to be served the solution on a platter, which is also not the case: Any suggestions or ideas of how this problem might be solved would be most welcomed. Most of the time the people asking these questions are very reasonable and appreciate even the most vague idea, yet their question is closed. Let's go further and assume that it IS a homework problem. So what? When I registered here I didn't see any rule that said not to post homework problems, nor do I see such a rule now. What is wrong with posting homework problems that makes people hunt them down with a passion to close them without even reading the entire question body? This site is full of questions asked by people who get paid to know the things they are asking, yet their questions are considered fine. How is solving someone's homework problem worse? In some places (like where I live), computer science is a mandatory high school subject, and not everyone is interested in it. How is helping at least those people worse than doing someone's JOB? Not answering homework questions is fine and it's everyone's choice, but I consider closing them to be an act of power abuse, selfishness, and an insult to the fellow community members who are also interested in a solution or want feedback on their proposed solution. So my questions are: - Why do questions like the above get closed for reasons that do not apply? Why do you close them? Why don't you? - Why doesn't a vote to reopen a question reopen it automatically? Needing 5 votes for a reopen takes too long, and it's not fair because one reopen vote basically cancels out a close vote, making it 4 close votes (or 5 to 1, which is the same as only 4 people wanting to close the question), which isn't enough to close the question. I think a question should only be closed when CloseVotes - ReopenVotes >= 5. I'm hoping this will stay up, but I realize it probably won't. In either case, I think this is worth saying and discussing, since it IS community-related.

    Read the article

  • How to keep multiple connectionString passwords safe, separate, and easy to deploy?

    - by Funka
    I know there are plenty of questions here already about this topic (I've read through as many as I could find), but I haven't yet been able to figure out how best to satisfy my particular criteria. Here are the goals: The ASP.NET application will run on a few different web servers, including localhost workstations for development. This means encrypting web.config using a machine key is out. The application will decide which connection string to use based on the server name (using a switch statement). For example, "localhost" and "dev.example.com" will use the DevDatabaseConnectionString, "test.example.com" will use the TestDatabaseConnectionString, and "www.example.com" will use the ProdDatabaseConnectionString, for example. Ideally, the exact same executables and web.config should be able to run on any of these environments, without needing to tailor or configure each environment separately every time that we deploy (something that seems like it would be easy to forget/mess up one day during a deployment, which is why we moved away from having just one connectionstring that has to be changed on each target). Deployment is currently accomplished via FTP. We will not have command-line access to the production web server. This means using aspnet_regiis.exe is out. (I could run on localhost, however, if this would still work.) We would prefer to not have to recompile the application whenever a password changes, so using web.config (or db.config or whatever) seems to make the most sense. A developer should not be able to decrypt the production database password. If a developer checks the source code out onto their localhost laptop (which would determine that it should be using the DevDatabaseConnectionString, remember?) and the laptop gets lost or stolen, it should not be possible to get at the other connection strings. Thus, having a single RSA private key to un-encrypt all three passwords cannot be considered. (Contrary to #3 above, it does seem like we'd need to have three separate key files if we went this route; these could be installed once per machine, and should the wrong key file get deployed to the wrong server, the worst that should happen is that the app can't decrypt anything---and not allow the wrong host to access the wrong database!) I know this is probably a subjective question (asking for a "best" way to do something), but given the criteria I've mentioned, I'm hoping that a single best answer will indeed arise. Thank you!

    Read the article

  • Dynamic Form Help for PHP and MySQL

    - by Tony
    The code below works as far as inserting records from a file into MySQL, but it only does so properly if the columns in the file are already ordered the same way as in the database. I would like for the user to be able to select the drop down the corresponds to each column in their file to match it up with the columns in the database (the database has email address, first name, last name). I am not sure how to accomplish this. Any ideas? <?php $lines =file('book1.csv'); foreach($lines as $data) { list($col1[],$col2[],$col3[]) = explode(',',$data); } $i = count($col1); if (isset($_POST['submitted'])) { DEFINE ('DB_USER', 'root'); DEFINE ('DB_PASSWORD', 'password'); DEFINE ('DB_HOST', 'localhost'); DEFINE ('DB_NAME', 'csvimport'); // Make the connection: $dbc = @mysqli_connect (DB_HOST, DB_USER, DB_PASSWORD, DB_NAME); for($d=1; $d<$i; $d++) { $q = "INSERT into contacts (email, first, last) VALUES ('$col3[$d]', '$col1[$d]', '$col2[$d]')"; $r = @mysqli_query ($dbc, $q); } } echo "<form action =\"handle2.php\" method=\"post\">Email<br /> <select name =\"email\"> <option value='col1'>$col1[0]</option> <option value='col2'>$col2[0]</option> <option value='col3'>$col3[0]</option> </select><br /><br /> First Name <br /> <select name=\"field2\"> <option value='col1'>$col1[0]</option> <option value='col2'>$col2[0]</option> <option value='col3'>$col3[0]</option> </select><br /><br /> Last Name <br /> <select name=\"field3\"> <option value='col1'>$col1[0]</option> <option value='col2'>$col2[0]</option> <option value='col3'>$col3[0]</option> </select><br /><br /> <input type=\"submit\" name=\"submit\" value=\"Submit\" /> <input type=\"hidden\" name=\"submitted\" value=\"TRUE\" /> </form>"; ?>

    Read the article

  • Special scheduling Algorithm (pattern expansion)

    - by tovare
    Question Do you think genetic algorithms worth trying out for the problem below, or will I hit local-minima issues? I think maybe aspects of the problem is great for a generator / fitness-function style setup. (If you've botched a similar project I would love hear from you, and not do something similar) Thank you for any tips on how to structure things and nail this right. The problem I'm searching a good scheduling algorithm to use for the following real-world problem. I have a sequence with 15 slots like this (The digits may vary from 0 to 20) : 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 (And there are in total 10 different sequences of this type) Each sequence needs to expand into an array, where each slot can take 1 position. 1 1 0 0 1 1 1 0 0 0 1 1 1 0 0 1 1 0 0 1 1 1 0 0 0 1 1 1 0 0 0 0 1 1 0 0 0 1 1 1 0 0 0 1 1 0 0 1 1 0 0 0 1 1 1 0 0 0 1 1 The constraints on the matrix is that: [row-wise, i.e. horizontally] The number of ones placed, must either be 11 or 111 [row-wise] The distance between two sequences of 1 needs to be a minimum of 00 The sum of each column should match the original array. The number of rows in the matrix should be optimized. The array then needs to allocate one of 4 different matrixes, which may have different number of rows: A, B, C, D A, B, C and D are real-world departments. The load needs to be placed reasonably fair during the course of a 10-day period, not to interfere with other department goals. Each of the matrix is compared with expansion of 10 different original sequences so you have: A1, A2, A3, A4, A5, A6, A7, A8, A9, A10 B1, B2, B3, B4, B5, B6, B7, B8, B9, B10 C1, C2, C3, C4, C5, C6, C7, C8, C9, C10 D1, D2, D3, D4, D5, D6, D7, D8, D9, D10 Certain spots on these may be reserved (Not sure if I should make it just reserved/not reserved or function-based). The reserved spots might be meetings and other events The sum of each row (for instance all the A's) should be approximately the same within 2%. i.e. sum(A1 through A10) should be approximately the same as (B1 through B10) etc. The number of rows can vary, so you have for instance: A1: 5 rows A2: 5 rows A3: 1 row, where that single row could for instance be: 0 0 1 1 1 0 0 0 0 0 0 0 0 0 0 etc.. Sub problem* I'de be very happy to solve only part of the problem. For instance being able to input: 1 1 2 3 4 2 2 3 4 2 2 3 3 2 3 And get an appropriate array of sequences with 1's and 0's minimized on the number of rows following th constraints above.

    Read the article

< Previous Page | 374 375 376 377 378 379 380 381 382 383 384 385  | Next Page >