Search Results

Search found 25503 results on 1021 pages for 'browser security'.

Page 379/1021 | < Previous Page | 375 376 377 378 379 380 381 382 383 384 385 386  | Next Page >

• Snap Server 18000 connection help!

  - by sicko666

  I wonder if anyone here can help me. I have a home server setup made up of old secondhand computers, 2 servers running Windows Server 2003, 1 workstation running Windows 7, a 16 port switch & an adsl ethernet modem. All these connect and talk to each other fine but then I got a "Snap Server 18000" and a "Snap disk 30sa" sata array. When I turn the Snap on, it boots past the BIOS, runs a kernel, then displays: This device cannot be managed via the video/kbd/mouse interface. The video is now disabled. You may access the management functions from your web browser. Only, none of the other PCs detect it, so no browser can find it! I have checked all cables, and all LEDs indicate there's a connection. I have installed the windows "iscsi" and the adaptec "Snap Server Manager" on all PCs but still it's not detected. I don't know what else to do, please advise!

  Read the article

• http://localhost/~admin/ gets a 403

  - by Pavan Katepalli

  When I go to localhost/~admin/ or 127.0.0.1/~admin/ my browser says: "Forbidden You don't have permission to access /~admin/ on this server." How do I change this?!??!?! It's driving me nuts! when I go to localhost or 127.0.0.1/ my browser says: "It Works!". I'm running mac osx 10.8. I created aliases in my .bash_profile file so that I can start, restart and stop Apache quickly: alias startApache="sudo apachectl start" alias stopApache="sudo apachectl stop" alias restartApache="sudo apachectl restart" In my /etc/apache2/httpd.conf file I turned on php5: LoadModule php5_module libexec/apache2/libphp5.so I also made sure to change the permissions for my admin.conf file with this command in terminal: sudo chmod 644 username.conf This is my /etc/apache2/users/admin.conf: <Directory "/Users/admin/Sites/"> Options Indexes MultiViews AllowOverride All Order allow,deny Allow from all </Directory>

  Read the article

• forward ssh ports on EC2

  - by Will Glass

  I have an SSH server on a private subnet within an EC2 vpc listening for ssh on port 9022 I also have a nat instance (standard Amazon EC2 nat) on a public instance. I would like to forward incoming SSH connections (port 9022) to my nat to the internal server (port 9022). I tried this, but it didn't work: sudo iptables -t nat -I PREROUTING -p tcp -i eth0 --dport 9022 -j DNAT --to-destination 10.0.2.11:9022 I verified that 10.0.2.11 is listening on port 9022. (I can telnet). I verified my security group allows incoming port 9022. I verified that /proc/sys/net/ipv4/ip_forward is 1. What am I missing? Edit: Turns out this was correct after all. I had a mistake in my security group.

  Read the article

• Hide notification area GPO not applying

  - by Richard

  I have created a GPO to hide the notification area on Windows XP SP3. The GPO must apply to all students but only in certain rooms so I've also enabled loopback processing on the GPO and linked to the OUs the computers are in. I've then added a group to the security filter that contains all student accounts. This is not applying. It doesn't even show up in gpresult. I have also tried linking it in the Students OU which contains all student accounts and applying a security filter with a group of the computers I want it to apply to. This didn't work either. It's possible I'm missing something straightforward. Would a WMI filter do the job, and if so how would I go about writing one so that it'll only apply to computers whose name begins with XX-RT for example.

  Read the article

• Permission denied accessing windows firewall

  - by Simon Sabin

  It doesn't matter who I am logged in as I am getting the following error in the mmc console when I launch the firewall advanced settings There was an error opening the Windows Firewall with Advanced Security snap in You do not have the correct permissions to open the Windows Firewall with Advanced Security console, You must be a member of the Administrators group or the Network Operators group to perform this task. For more information, contact your system administrator. Error code: 0x5. Ive tried processmonitor to identify what permission is being denied but no luck. If I run netsh directly I get access denied as well. This is running windows server 2008 SP2. And yes I was running as an administrator. Any ideas?

  Read the article

• Remote tunning of jboss using visaulVM

  - by sagarzond

  Hi, I am using visualVM for tunning jboss remotly. I followed following step but unable to get JVM information in visualVM. Start jstatd server on remote machine where jboss running using command jstatd -p 1234 -J-Djava.security.policy=tools.policy In this tools.policy file is added to $JAVA_HOME/bin folder content of tools.policy file is - grant codebase "file:${java.home}/../lib/tools.jar" { permission java.security.AllPermission; }; Start visualVM remote connect on 1234 port using jstat I unable to get information of jboss plz help me........

  Read the article

• How to access apache behind home router?

  - by Filip

  Hi! I have public IP 89.103.xxx.yyy, then router and home network with 192.168.1.zz My router is set to portforward every 8056 on ip adress 192.168.1.5 (my PC), where apache is running. Apache listen is set to: Listen 127.0.0.1:80 Listen 192.168.1.5:8056 When i try: Listen 89.103.xxx.yyy:8056 I get message "unexpected end of apache" (I'm using easyphp for windows). Added: When i try to access 89.103.xxx.yyy via browser, it's prompting router request for authorization to access router web-settings. And when i try 89.103.xxx.yyy:8056, browser says that connection timed out =(

  Read the article

• Couple folders went 'access denied' in Windows. Why and how to fix?

  - by Nathaniel

  So, after a failed Windows 7 install, I put XP back on, and had a adrenaline shot when I got an access denied on a couple of my backed up folders. I already tried the instructions here at Microsoft KB, but it didn't fix it. I did add myself with full permissions on the main section of the Security tab, though, and that gave me access into the folder (I could do it in XP Home because of the Windows NT SP4 Security Configuration Manager). However, it appears some subfolders are still inaccessible. Two questions, then. Why exactly did this happen and how do I fix it?

  Read the article

• YouTube videos not working

  - by André

  I have a problem with watching YouTube videos. It says: "An error occurred, please try again later". I've tried loading different videos and that's what it says to all the videos I try to watch. I've tried using another browser, clearing cache + cookies etc, but none of that really worked out. My operating system is Windows 7 Home Premium, I use Google Chrome as my browser. And the YouTube videos was able to be watched earlier. I suspect that it has something to do with the PC, since I've got YouTube working on my laptop earlier. Not sure if it still works on my laptop though. Hope I've given enough information for you to help me out with this problem. Feel free to ask if there's anything else you need to know. Hope you can/will help me out. :)

  Read the article

• Active X Control issue on Terminal Server 2003

  - by Saif Khan

  I have a security camera system which can be viewed remotely via a web browser. It works excellent only with IE 6 and up and requires an ActiveX control "ERViewer.ocx". Some users require to view the cameras via Windows Terminal Server, but when they try to open the link to the DVR they get the prompt ti install the ActiveX and then the browser crashes when they try to install it. I logged in as admin and got the same issue. I called the tech support of the DVR but they have no idea, in other words, the usual useless tech support. Here is what I get in the error log Faulting application iexplore.exe, version 7.0.6000.16735, faulting module ERViewer.ocx, version 1.6.0.8, fault address 0x000064d7. I am sure it could be some kinda permission getting an ocx to run in IE. What else can I tweak?

  Read the article

• Using VLANs that are routed together?

  - by dannymcc

  I have a quick question that's bugging me the more I read about VLANs. So far I understand that they are useful for dividing the network into sub-sections, but if you route them together does that not remove any security benefit? As an example, if I created a VLAN on my home network which was simply one computer, one server and one router.if I wanted to divide the network between computers and servers I could put the computer on VLAN 10 and the server on VLAN 20. Then the computer would no longer be able to communicate with the server - unless I added a static route to the router that connected the two together, basically telling VLAN 10 that VLAN 20 exists and how to communicate with it. The VLANs would then be connected in a similar way to a 'flat' network that has no VLANs. Therefore, surely, all security benefits are lost. Am I missing something?

  Read the article

• Yahoo Webmail - Garbled Quote Text

  - by baultista

  I've encountered a very strange problem when trying to reply to e-mail via my Yahoo Web Mail from a family member's computer. She received an e-mail from a client who is using Microsoft Outlook. When I receive the message it looks perfectly fine in my browser and I can read it. However, when I try to reply to the e-mail the quoted text looks as such: > #yiv9181642880 p.yiv9181642880msonormal1114, #yiv9181642880 > li.yiv9181642880msonormal1114, #yiv9181642880 > div.yiv9181642880msonormal1114 > {margin-right:0in;margin-left:0in;font-size:12.0pt;} > #yiv9181642880 p.yiv9181642880msoacetate1114, #yiv9181642880 > li.yiv9181642880msoacetate1114, #yiv9181642880 > div.yiv9181642880msoacetate1114 > {margin-right:0in;margin-left:0in;font-size:12.0pt;} > #yiv9181642880 p.yiv9181642880emailquote1114, #yiv9181642880 > li.yiv9181642880emailquote1114, #yiv9181642880 > div.yiv9181642880emailquote1114 > {margin-right:0in;margin-left:0in;font-size:12.0pt;} > #yiv9181642880 p.yiv9181642880msochpdefault1114, > #yiv9181642880 li.yiv9181642880msochpdefault1114, > #yiv9181642880 div.yiv9181642880msochpdefault1114 > {margin-right:0in;margin-left:0in;font-size:12.0pt;} > #yiv9181642880 p.yiv9181642880msonormal53, #yiv9181642880 > li.yiv9181642880msonormal53, #yiv9181642880 > div.yiv9181642880msonormal53 > {margin-right:0in;margin-left:0in;font-size:12.0pt;} It's the strangest thing. It doesn't happen with all e-mails except this particular one. At a glance it almost looks like raw CSS code that's being displayed, but I really can't understand why. So far I have tried the following: Try a different browser, both IE11 and Google Chrome Check the browser encoding settings Check Yahoo Web Mail's encoding/font settings My only other guess is that the client used some weird font or formatting on the e-mail that is throwing the message body out of sync. Unfortunately for my family member, she is a contractor working with a medium-sized company that refuses to provide her with a domain e-mail address, so she is forced to conduct business this way. Simply asking the sender to use a more widely supported font wouldn't be an acceptable solution here. Any thoughts?

  Read the article

• How do I set up an IP address on a Linux VM running in VM Player so I can access it from my Windows 7 host?

  - by BradyKelly

  I have just installed an Openbravo appliance on my Windows 7 VM Player host. I am now staring at a command prompt that tells me to go to http://localhost to access the ERP system, but I cannot find any browser on the appliance. I am guessing I should rather follow their advice to configure an IP address for the Linux VM and just access that from a Windows browser on my host. How do I go about this? More specifically, How do I choose a local IP address to assign? How do I set things up so that this IP address is visible to my Windows host? Their help says to assign an DNS, to make the server visible to the internet, but internet visibility per se is not needed. How should I interpret or adapt this help for that? Finally to make the IP address available to the Internet, assign some DNS servers to it: $ echo "nameserver IP_DNS1" /etc/resolv.conf $ echo "nameserver IP_DNS2" /etc/resolv.conf

  Read the article

• Web based operating system

  - by Dee Monteleone

  with a web os. can the browser still be in the device by itself?

  Read the article

• Setting up multiple wireless access points on same network

  - by SqlRyan

  I'd like to add wireless to my network, and I need multiple access points to cover the whole area. I'd like to set them up so that there's only one "wireless network" that the clients see, and it switches them as seamlessly as possible between access points as they wander around (if that's not possible, then at least have it so that they don't need to set up the security by hand on each one the first time, if possible). I've searched online, and there are quite a few sets of mixed instructions (same vs different SSID, frequency, does the security need to match exactly, etc.). Can somebody who has some experience doing this please let me know what they did? I imagine it's pretty simple, but there seems to be no clear cut "yes, you can do this" online, even though I know you can. I have a mid-size LAN with about 20 workstations and two Domain Controllers on it. Also, I'll be doing this with consumer wireless components, if it makes a difference, not enterprise-level components (ie. Linksys rather than Cisco).

  Read the article

• Installation of SQL Server 2008 r2 express - Service accounts

  - by Shimmy

  hello! I am in middle of installing SQL Server 2008 r2 express, where an existing instance has been installed long ago. I need to install a new instance. During the installation I reach a tab where I am supposed to enter accounts for "SQL Server Database Engine" and Browser. The browser is already selected, my question is about the 1st row. What account should I enter? I need to be able to perform SQL queries from SMSS and from my app, thru windows authentication.

  Read the article

• Why won't the floppy mount?

  - by dboarman-FissureStudios

  The 1.44Meg floppy won't mount in my Nautilus file browser. When I try to mount it, it says there is no media in the drive. Yet, I can write to the floppy through the terminal using the 'cp' command. I can enter the command: mount -t ext2 /floppy and it mounts. I have also run a check and the disk itself is 100% clean. So, why can't I get the nautilus browser to open up the floppy? Is there a way to see the actual floppy from the terminal?

  Read the article

• Error installing a .NET Windows service with InstallUtil

  - by norlando

  I keep getting the error below when every I try to use the InstallUtil to install my .NET service. I put "installutil myservice.exe" into command prompt and then get the error. Any idea of what the problem is? Do I need to add another parameter? An exception occurred during the Install phase. System.Security.SecurityException: The source was not found, but some or all event logs could not be searched. Inaccessible logs: Security.

  Read the article

• localhost still responses after uninstalling IIS Windows 7

  - by ryanzec

  I was experimenting with IIS and ASP.NET however I want to go back to WAMP as far as my development server stack on my local windows 7 computer. So I disabled the IIS windows program (using Control Panel - Program and Features - Turn Windows Features on or off) and installed WAMP. I then when to localhost in my browser and just got a blank page. I then uninstalled WAMP and tried again and still got the blank page. I cleared my browser all of saved data like cache and still the same effect. I have uninstalled IIS and WAMP however I can't get localhost to return server not found like it usually does. I know the skype can sometimes effect things running on port 80 so I quit that but still it does not work. Is there a way I can figure out what is running on the port and returning me an empty page?

  Read the article

• open-sshd service withou pam support !! How can I add pam support to sshd? Ubuntu

  - by marc.riera

  Hi, I'm using AD as my user account server with ldap. Most of the servers run with UsePam yes except this one, it has lack of pam support on sshd. root@linserv9:~# ldd /usr/sbin/sshd linux-vdso.so.1 => (0x00007fff621fe000) libutil.so.1 => /lib/libutil.so.1 (0x00007fd759d0b000) libz.so.1 => /usr/lib/libz.so.1 (0x00007fd759af4000) libnsl.so.1 => /lib/libnsl.so.1 (0x00007fd7598db000) libcrypto.so.0.9.8 => /usr/lib/libcrypto.so.0.9.8 (0x00007fd75955b000) libcrypt.so.1 => /lib/libcrypt.so.1 (0x00007fd759323000) libc.so.6 => /lib/libc.so.6 (0x00007fd758fc1000) libdl.so.2 => /lib/libdl.so.2 (0x00007fd758dbd000) /lib64/ld-linux-x86-64.so.2 (0x00007fd759f0e000) I have this packages installed root@linserv9:~# dpkg -l|grep -E 'pam|ssh' ii denyhosts 2.6-2.1 an utility to help sys admins thwart ssh hac ii libpam-modules 0.99.7.1-5ubuntu6.1 Pluggable Authentication Modules for PAM ii libpam-runtime 0.99.7.1-5ubuntu6.1 Runtime support for the PAM library ii libpam-ssh 1.91.0-9.2 enable SSO behavior for ssh and pam ii libpam0g 0.99.7.1-5ubuntu6.1 Pluggable Authentication Modules library ii libpam0g-dev 0.99.7.1-5ubuntu6.1 Development files for PAM ii openssh-blacklist 0.1-1ubuntu0.8.04.1 list of blacklisted OpenSSH RSA and DSA keys ii openssh-client 1:4.7p1-8ubuntu1.2 secure shell client, an rlogin/rsh/rcp repla ii openssh-server 1:4.7p1-8ubuntu1.2 secure shell server, an rshd replacement ii quest-openssh 5.2p1_q13-1 Secure shell root@linserv9:~# What I'm doing wrong? thanks. Edit: root@linserv9:~# cat /etc/pam.d/sshd # PAM configuration for the Secure Shell service # Read environment variables from /etc/environment and # /etc/security/pam_env.conf. auth required pam_env.so # [1] # In Debian 4.0 (etch), locale-related environment variables were moved to # /etc/default/locale, so read that as well. auth required pam_env.so envfile=/etc/default/locale # Standard Un*x authentication. @include common-auth # Disallow non-root logins when /etc/nologin exists. account required pam_nologin.so # Uncomment and edit /etc/security/access.conf if you need to set complex # access limits that are hard to express in sshd_config. # account required pam_access.so # Standard Un*x authorization. @include common-account # Standard Un*x session setup and teardown. @include common-session # Print the message of the day upon successful login. session optional pam_motd.so # [1] # Print the status of the user's mailbox upon successful login. session optional pam_mail.so standard noenv # [1] # Set up user limits from /etc/security/limits.conf. session required pam_limits.so # Set up SELinux capabilities (need modified pam) # session required pam_selinux.so multiple # Standard Un*x password updating. @include common-password

  Read the article

• How can we achive a 403 Permissions Denied for a subdomain?

  - by marikamitsos

  We have a multisite installed in the root directory (multisite.com) and also a wordpress single installation on a subdomain (help.multisite.com) In the root .htaccess we placed: #START Security: Disallow access to folders Options All -Indexes # END Security On the main site (as expected we get) "403 Permission Denied. You do not have permission for this request /wp-content/blogs.dir/83/" Nice. :) BUT. We just noticed that when trying to access the subdomains folders we get: Internal Server Error. The server encountered an internal error or misconfiguration and was unable to complete your request.... Additionally, a 500 Internal Server Error error... This is something we do NOT want. So the question is: How can we avoid the above result and make the message for the subdomains be "403 Permission Denied" (the same as for the main site and NOT "500 Internal Server Error" (as it is now)? We put what, where?

  Read the article

• Monitor HTTP usage on network from Linux free

  - by David

  I manage a small office network. I am looking to start monitoring/logging internet usage (website requests) for each user on a small network. All the windows clients are running through a switch to a BT router. I also have a linux (centos) machine which is connected as a client to the BT router as well. Is there any free software I can install on the linux box (or my own machine) to allow me to log and monitor websites requested by users kind of like browser history. Ideally, something that would collect each client's browser history in 1 place. Thanks

  Read the article

• MySQL doesn't talk to PHP anymore (EasyPHP)

  - by Matt Ellen

  I've just upgraded from Windows XP to Windows 7 (64 bit) I was using EasyPHP 5.3.1 to develop my website, but since I've upgraded I can't get PHP to talk to MySQL. Even the PHPMyAdmin page doesn't load. I've tried installing the latest 64bit version of MySQL in place of the supplied version of MySQL, but that hasn't helped. The queries just don't seem to reach MySQL. I have verified that the DB for my database works by running mysql on the command line. PHPMyAdmin doesn't display an error, just a blank page. The error coming up from my website is: Warning: PDO::__construct() [pdo.--construct]: [2002] A connection attempt failed because the connected party did not (trying to connect via tcp://localhost:3306) in E:\services\EasyPHP-5.3.1\www\IdeaWeb\classes\Security.inc on line 14 Fatal error: Maximum execution time of 60 seconds exceeded in E:\services\EasyPHP-5.3.1\www\IdeaWeb\classes\Security.inc on line 0 Does anyone know how to solve this? (i.e. get MySQL talking to PHP.)

  Read the article

• windows 7 issues with local domain name

  - by Phill

  Until recently my operating system was XP where for the purpose of development and testing of php and zen cart I set up xampp that included apache http server and mercury mail server I also made changes to C:\Windows\System32\drivers\etc\hosts as follows: 127.0.0.1 www.zen.com # For browser access 127.0.0.1 mail.mercury.com # For email access 127.0.0.1 mercury.com # For mercury mail server This allowed the use of www.zen.com in the address bar of my browser rather than 'localhost' and mail.mercury.com to access email via thunderbird. All was well. Then I installed windows7, I made all the mods and again everything appeared to run as expected.Then I turned off my wireless modem causing all working local connections to fail. Localhost in the address bar still works but not www.zen.com and thunderbird 'cannot find mail.mercury.com' Is there some way to overcome what ever is causing this.

  Read the article

• Create Google Maps screenshots at regular intervals

  - by Dave Jarvis

  Background People are concerned that building a pipeline to the West Coast of Canada will increase the number of oil tankers, thus increasing the probability of a major oil spill, thereby creating an environmental catastrophe. The AIS Live Ships Map website captures real-time Marine Traffic updates using a Google Maps interface. While it is possible to obtain data from an AIS data feed, often the feeds are either pay-for-use, or otherwise encumbered with license restrictions. Problem The AIS Live Ships website presents a map in the browser: The map above has had its location interactively changed to focus on the area in question: the northern straight of Vancouver Island. Question How would you create a service that captures the map every 30 minutes and that could run, with neither user-intervention nor a significant memory footprint, for a few years? Idea #1 Create a virtual machine. Install and run a light-weight browser. Use Shutter to take captures at regular intervals. Idea #2 Use Python's Ghost Webkit to automate the captures. Thank you!

  Read the article

< Previous Page | 375 376 377 378 379 380 381 382 383 384 385 386  | Next Page >