Search Results

Search found 177982 results on 7120 pages for 'device not connected'.

Page 38/7120 | < Previous Page | 34 35 36 37 38 39 40 41 42 43 44 45  | Next Page >

  • Google MAIL not arriving - relay not allowed

    - by renevdkooi
    I have a server with sendmail, hosting my domain mind-zone.nl, i changed the MX records to point to the server. When I use Hotmail or any other client the email arrives and everything is fine. ONLY mail from GMAIL server is bounced and gmail returns "relay denied". I have set all the virtual server host settings etc, from command line I can send mails as well, hotmail works, etc. Just not gmail. The strange thing is, this is what gmail returns: Look at the lower part: "Received by" it returns some IP address which is not mine and has absolutely nothing with my domain. While when I do a NSLOOKUP and change to google's DNS server it will state that the IP Address for my domain is correctly pointing at my server. Technical details of permanent failure: Google tried to deliver your message, but it was rejected by the recipient domain. We recommend contacting the other email provider for further information about the cause of this error. The error that the other server returned was: 554 554 5.7.1: Relay access denied (state 14). ----- Original message ----- MIME-Version: 1.0 Received: by 10.14.37.138 with SMTP id y10mr3421504eea.43.1297665573901; Sun, 13 Feb 2011 22:39:33 -0800 (PST) Received: by 10.14.29.75 with HTTP; Sun, 13 Feb 2011 22:39:33 -0800 (PST)

    Read the article

  • Can I delete libc-bin?

    - by Balazs Szikszay
    Question is simple, I need to know because I cant upgrade/install anything, because it always says I have to uninstall/delete it to continue. It also says dont do it, if I dont know what I am doing. EDIT: szikszay@szikszay-Latitude-E5530-non-vPro:~$ sudo apt-get upgrade Reading package lists... Done Building dependency tree Reading state information... Done You might want to run ‘apt-get -f install’ to correct these. The following packages have unmet dependencies. ia32-libs-multiarch:i386 : Depends: libqtcore4:i386 but it is not installed Depends: libqtgui4:i386 but it is not installed Depends: libqt4-dbus:i386 but it is not installed Depends: libqt4-network:i386 but it is not installed Depends: libqt4-opengl:i386 but it is not installed Depends: libqt4-qt3support:i386 but it is not installed Depends: libqt4-script:i386 but it is not installed Depends: libqt4-scripttools:i386 but it is not installed Depends: libqt4-sql:i386 but it is not installed Depends: libqt4-svg:i386 but it is not installed Depends: libqt4-test:i386 but it is not installed Depends: libqt4-xml:i386 but it is not installed Depends: libqt4-xmlpatterns:i386 but it is not installed Depends: libcups2:i386 but it is not installed Depends: libcupsimage2:i386 but it is not installed Depends: libcurl3:i386 but it is not installed Depends: libnss3:i386 but it is not installed Depends: libnspr4:i386 but it is not installed Depends: libssl1.0.0:i386 but it is not installed Recommends: libgl1-mesa-glx:i386 but it is not installed Recommends: libgl1-mesa-dri:i386 but it is not installed lib32ffi6 : Depends: libc6-i386 (= 2.4) but it is not installed lib32gcc1 : Depends: libc6-i386 (= 2.5) but it is not installed lib32nss-mdns : Depends: libc6-i386 (= 2.4) but it is not installed lib32stdc++6 : Depends: libc6-i386 (= 2.4) but it is not installed lib32z1 : Depends: libc6-i386 (= 2.4) but it is not installed libacl1:i386 : Depends: libc6:i386 (= 2.4) but it is not installed libattr1:i386 : Depends: libc6:i386 (= 2.4) but it is not installed libaudio2:i386 : Depends: libc6:i386 (= 2.4) but it is not installed libavahi-client3:i386 : Depends: libc6:i386 (= 2.4) but it is not installed Depends: libdbus-1-3:i386 (= 1.1.1) but it is not installed libavahi-common3:i386 : Depends: libc6:i386 (= 2.4) but it is not installed libcomerr2:i386 : Depends: libc6:i386 (= 2.12) but it is not installed libdb5.1:i386 : Depends: libc6:i386 (= 2.4) but it is not installed libdrm-intel1:i386 : Depends: libc6:i386 (= 2.3.4) but it is not installed libdrm-nouveau1a:i386 : Depends: libc6:i386 (= 2.1.3) but it is not installed libdrm-radeon1:i386 : Depends: libc6:i386 (= 2.3.4) but it is not installed libdrm2:i386 : Depends: libc6:i386 (= 2.7) but it is not installed libffi6:i386 : Depends: libc6:i386 (= 2.4) but it is not installed libfontconfig1:i386 : Depends: libc6:i386 (= 2.7) but it is not installed Depends: libexpat1:i386 (= 1.95.8) but it is not installed Depends: libfreetype6:i386 (= 2.2.1) but it is not installed libgcc1:i386 : Depends: libc6:i386 (= 2.2.4) but it is not installed libgcrypt11:i386 : Depends: libc6:i386 (= 2.4) but it is not installed libgdbm3:i386 : Depends: libc6:i386 (= 2.1.3) but it is not installed libglib2.0-0:i386 : Depends: libc6:i386 (= 2.9) but it is not installed libgpg-error0:i386 : Depends: libc6:i386 (= 2.1.3) but it is not installed libice6:i386 : Depends: libc6:i386 (= 2.11) but it is not installed libidn11:i386 : Depends: libc6:i386 (= 2.4) but it is not installed libjpeg62:i386 : Depends: libc6:i386 (= 2.7) but it is not installed libkeyutils1:i386 : Depends: libc6:i386 (= 2.1.3) but it is not installed liblcms1:i386 : Depends: libc6:i386 (= 2.7) but it is not installed libllvm2.9:i386 : Depends: libc6:i386 (= 2.11) but it is not installed libmng1:i386 : Depends: libc6:i386 (= 2.11) but it is not installed libpciaccess0:i386 : Depends: libc6:i386 (= 2.7) but it is not installed libpcre3:i386 : Depends: libc6:i386 (= 2.4) but it is not installed librtmp0:i386 : Depends: libc6:i386 (= 2.7) but it is not installed Depends: libgnutls26:i386 (= 2.9.11-0) but it is not installed libsasl2-2:i386 : Depends: libc6:i386 (= 2.4) but it is not installed libsasl2-modules:i386 : Depends: libc6:i386 (= 2.4) but it is not installed Depends: libssl1.0.0:i386 (= 1.0.0) but it is not installed libselinux1:i386 : Depends: libc6:i386 (= 2.8) but it is not installed libsm6:i386 : Depends: libc6:i386 (= 2.4) but it is not installed libsqlite3-0:i386 : Depends: libc6:i386 (= 2.4) but it is not installed libstdc++6:i386 : Depends: libc6:i386 (= 2.4) but it is not installed libuuid1:i386 : Depends: libc6:i386 (= 2.4) but it is not installed libx11-6:i386 : Depends: libc6:i386 (= 2.4) but it is not installed libxau6:i386 : Depends: libc6:i386 (= 2.4) but it is not installed libxcb1:i386 : Depends: libc6:i386 (= 2.4) but it is not installed libxdamage1:i386 : Depends: libc6:i386 (= 2.1.3) but it is not installed libxdmcp6:i386 : Depends: libc6:i386 (= 2.4) but it is not installed libxext6:i386 : Depends: libc6:i386 (= 2.4) but it is not installed libxfixes3:i386 : Depends: libc6:i386 (= 2.1.3) but it is not installed libxrender1:i386 : Depends: libc6:i386 (= 2.1.3) but it is not installed libxss1:i386 : Depends: libc6:i386 (= 2.1.3) but it is not installed libxt6:i386 : Depends: libc6:i386 (= 2.7) but it is not installed libxxf86vm1:i386 : Depends: libc6:i386 (= 2.1.3) but it is not installed zlib1g:i386 : Depends: libc6:i386 (= 2.4) but it is not installed E: Unmet dependencies. Try using -f. szikszay@szikszay-Latitude-E5530-non-vPro:~$ sudo apt-get upgrade -f Reading package lists... Done Building dependency tree Reading state information... Done Correcting dependencies... Done The following packages will be REMOVED libc-bin The following NEW packages will be installed libc-bin:i386 libc6:i386 libc6-i386 libcups2:i386 libcupsimage2:i386 libcurl3:i386 libdbus-1-3:i386 libexpat1:i386 libfreetype6:i386 libgl1-mesa-dri:i386 libgl1-mesa-glx:i386 libglapi-mesa:i386 libgnutls26:i386 libgssapi-krb5-2:i386 libk5crypto3:i386 libkrb5-3:i386 libkrb5support0:i386 libldap-2.4-2:i386 libnspr4:i386 libnss3:i386 libpng12-0:i386 libqt4-dbus:i386 libqt4-declarative:i386 libqt4-designer:i386 libqt4-network:i386 libqt4-opengl:i386 libqt4-qt3support:i386 libqt4-script:i386 libqt4-scripttools:i386 libqt4-sql:i386 libqt4-svg:i386 libqt4-test:i386 libqt4-xml:i386 libqt4-xmlpatterns:i386 libqtcore4:i386 libqtgui4:i386 libssl1.0.0:i386 libtasn1-3:i386 libtiff4:i386 libxi6:i386 The following packages have been kept back: ginn libgrip0 linux-headers-generic linux-image-generic unity unity-common xserver-xorg-input-evdev xserver-xorg-input-synaptics The following packages will be upgraded: accountsservice acpi-support acpid aisleriot alsa-utils app-install-data-partner apparmor appmenu-qt apport apport-gtk apt apt-transport-https apt-utils aptdaemon aptdaemon-data apturl apturl-common at-spi2-core bamfdaemon banshee banshee-extension-soundmenu banshee-extension-ubuntuonemusicstore baobab bind9-host binutils bluez bluez-alsa bluez-cups bluez-gstreamer brasero brasero-cdrkit brasero-common brltty bzip2 ca-certificates-java checkbox checkbox-gtk colord command-not-found command-not-found-data compiz compiz-core compiz-gnome compiz-plugins-default compiz-plugins-main-default cups cups-bsd cups-client cups-common cups-ppdc dbus dbus-x11 deja-dup desktop-file-utils dnsutils dpkg ecryptfs-utils empathy empathy-common eog evince evince-common evolution-data-server evolution-data-server-common file-roller firefox firefox-globalmenu firefox-gnome-support firefox-locale-en firefox-locale-hu gbrainy gcalctool gconf2 gconf2-common gedit gedit-common ghostscript ghostscript-cups ghostscript-x gir1.2-atspi-2.0 gir1.2-gconf-2.0 gir1.2-gnomebluetooth-1.0 gir1.2-gtk-3.0 gir1.2-gtksource-3.0 gir1.2-totem-1.0 gir1.2-unity-4.0 gir1.2-webkit-3.0 gnome-accessibility-themes gnome-bluetooth gnome-control-center gnome-control-center-data gnome-desktop3-data gnome-font-viewer gnome-games-common gnome-icon-theme gnome-keyring gnome-mahjongg gnome-online-accounts gnome-orca gnome-power-manager gnome-screenshot gnome-search-tool gnome-session gnome-session-bin gnome-session-canberra gnome-session-common gnome-settings-daemon gnome-sudoku gnome-system-log gnome-system-monitor gnome-utils-common gnomine gnupg gpgv grub-common grub-pc grub-pc-bin grub2-common gstreamer0.10-gconf gstreamer0.10-plugins-good gstreamer0.10-pulseaudio gvfs gvfs-backends gvfs-bin gvfs-fuse gwibber gwibber-service gwibber-service-facebook gwibber-service-identica gwibber-service-twitter gzip hpijs hplip hplip-cups hplip-data icedtea-6-jre-cacao icedtea-6-jre-jamvm icedtea-netx ifupdown im-switch indicator-datetime indicator-session indicator-sound initramfs-tools initramfs-tools-bin initscripts insserv isc-dhcp-client isc-dhcp-common iso-codes jockey-common jockey-gtk language-pack-en language-pack-en-base language-pack-gnome-en language-pack-gnome-en-base language-pack-gnome-hu language-pack-gnome-hu-base language-pack-hu language-pack-hu-base language-selector-common language-selector-gnome libaccountsservice0 libapt-inst1.3 libapt-pkg4.11 libarchive1 libasound2-plugins libatk-adaptor libatspi2.0-0 libbamf0 libbamf3-0 libbind9-60 libbluetooth3 libbrasero-media3-1 libbrlapi0.5 libbz2-1.0 libc-dev-bin libc6 libc6-dev libcamel-1.2-29 libcanberra-gtk-module libcanberra-gtk0 libcanberra-gtk3-0 libcanberra-gtk3-module libcanberra-pulse libcanberra0 libcolord1 libcups2 libcupscgi1 libcupsdriver1 libcupsimage2 libcupsmime1 libcupsppdc1 libcurl3-gnutls libdbus-1-3 libdbus-glib-1-2 libdecoration0 libdns69 libebackend-1.2-1 libebook1.2-12 libecal1.2-10 libecryptfs0 libedata-book-1.2-11 libedata-cal-1.2-13 libedataserver1.2-15 libedataserverui-3.0-1 libevince3-3 libexif12 libexpat1 libfreetype6 libgail-3-0 libgail-3-common libgck-1-0 libgconf2-4 libgcr-3-1 libgdata-common libgdata13 libgl1-mesa-dri libgl1-mesa-glx libglapi-mesa libglu1-mesa libgnome-bluetooth8 libgnome-control-center1 libgnome-desktop-3-2 libgnutls26 libgoa-1.0-0 libgs9 libgs9-common libgssapi-krb5-2 libgtk-3-0 libgtk-3-bin libgtk-3-common libgtksourceview-3.0-0 libgtksourceview-3.0-common libgudev-1.0-0 libgweather-3-0 libgweather-common libgwibber-gtk2 libgwibber2 libhpmud0 libicu44 libimobiledevice2 libisc62 libisccc60 libisccfg62 libjasper1 libjs-jquery libk5crypto3 libkrb5-3 libkrb5support0 libldap-2.4-2 liblightdm-gobject-1-0 liblwres60 libmetacity-private0 libmission-control-plugins0 libmono-cairo4.0-cil libmono-corlib4.0-cil libmono-csharp4.0-cil libmono-i18n-west4.0-cil libmono-i18n4.0-cil libmono-posix4.0-cil libmono-security4.0-cil libmono-sharpzip4.84-cil libmono-system-configuration4.0-cil libmono-system-core4.0-cil libmono-system-drawing4.0-cil libmono-system-security4.0-cil libmono-system-xml4.0-cil libmono-system4.0-cil libmono-zeroconf1.0-cil libmysqlclient16 libnautilus-extension1 libncurses5 libncursesw5 libnm-glib-vpn1 libnm-glib4 libnm-gtk-common libnm-gtk0 libnm-util2 libnotify0.4-cil libnspr4 libnss3 libnss3-1d libnux-1.0-0 libnux-1.0-common libpam-gnome-keyring libpam-modules libpam-modules-bin libpam-runtime libpam0g libperl5.12 libpng12-0 libpoppler-glib6 libpoppler13 libproxy0 libpulse-mainloop-glib0 libpulse0 libpurple-bin libpurple0 libpython2.7 libqt4-dbus libqt4-declarative libqt4-network libqt4-opengl libqt4-script libqt4-sql libqt4-sql-mysql libqt4-svg libqt4-xml libqt4-xmlpatterns libqtcore4 libqtgui4 libreoffice-base-core libreoffice-calc libreoffice-common libreoffice-core libreoffice-draw libreoffice-emailmerge libreoffice-gnome libreoffice-gtk libreoffice-help-en-gb libreoffice-help-en-us libreoffice-help-hu libreoffice-impress libreoffice-l10n-common libreoffice-l10n-en-gb libreoffice-l10n-en-za libreoffice-l10n-hu libreoffice-math libreoffice-style-human libreoffice-writer libsane-hpaio libsmbclient libsnmp-base libsnmp15 libssl1.0.0 libsyncdaemon-1.0-1 libt1-5 libtasn1-3 libtiff4 libtinfo5 libtotem0 libubuntuone-1.0-1 libubuntuone1.0-cil libudev0 libunity-core-4.0-4 libunity6 libusbmuxd1 libv4l-0 libvorbis0a libvorbisenc2 libvorbisfile3 libwbclient0 libwebkitgtk-1.0-0 libwebkitgtk-1.0-common libwebkitgtk-3.0-0 libwebkitgtk-3.0-common libxi6 libxml2 libxslt1.1 lightdm linux-firmware linux-libc-dev mawk metacity metacity-common mobile-broadband-provider-info modemmanager mono-4.0-gac mono-gac mono-runtime mousetweaks multiarch-support mysql-common nautilus nautilus-data nautilus-sendto-empathy ncurses-base ncurses-bin network-manager network-manager-gnome nux-tools onboard openjdk-6-jre openjdk-6-jre-headless openjdk-6-jre-lib openssl perl perl-base perl-modules poppler-utils pulseaudio pulseaudio-esound-compat pulseaudio-module-bluetooth pulseaudio-module-gconf pulseaudio-module-x11 pulseaudio-utils python-apport python-aptdaemon python-aptdaemon-gtk python-aptdaemon.gtk3widgets python-aptdaemon.gtkwidgets python-brlapi python-crypto python-cups python-cupshelpers python-egenix-mxdatetime python-egenix-mxtools python-gobject python-gobject-cairo python-httplib2 python-keyring python-launchpadlib python-libproxy python-libxml2 python-pam python-papyon python-pkg-resources python-problem-report python-pyatspi2 python-software-properties python-ubuntuone-client python-ubuntuone-storageprotocol python-uno python2.7 python2.7-minimal qdbus samba-common samba-common-bin seahorse shotwell simple-scan smbclient sni-qt software-center software-properties-common software-properties-gtk sudo system-config-printer-common system-config-printer-gnome system-config-printer-udev sysv-rc sysvinit-utils telepathy-indicator telepathy-mission-control-5 thunderbird thunderbird-globalmenu thunderbird-gnome-support thunderbird-locale-en thunderbird-locale-en-gb thunderbird-locale-en-us thunderbird-locale-hu tomboy totem totem-common totem-mozilla totem-plugins transmission-common transmission-gtk ttf-opensymbol tzdata tzdata-java ubuntu-desktop ubuntu-docs ubuntu-minimal ubuntu-sso-client ubuntu-standard ubuntuone-client ubuntuone-client-gnome ubuntuone-couch udev unity-lens-applications unity-services uno-libs3 update-manager update-manager-core update-notifier update-notifier-common upstart ure usbmuxd vim-common vim-tiny vinagre vino whois x11-common xdiagnose xorg xserver-common xserver-xorg xserver-xorg-core xserver-xorg-input-all xserver-xorg-video-all xserver-xorg-video-intel xserver-xorg-video-openchrome xserver-xorg-video-qxl xul-ext-ubufox WARNING: The following essential packages will be removed. This should NOT be done unless you know exactly what you are doing! libc-bin 498 upgraded, 40 newly installed, 1 to remove and 8 not upgraded. 69 not fully installed or removed. Need to get 439 MB of archives. After this operation, 135 MB of additional disk space will be used. You are about to do something potentially harmful To continue type in the phrase ‘Yes, do as I say!’ ?] I tried to upgrade but it gives me an error, when i try to upgrade-f it says i should delete libc-bin. Thanks for the answers btw. EDIT2: it also says this: The package system is broken If you are using third party repositories then disable them, since they are a common source of problems. Now run the following command in a terminal: apt-get install -f

    Read the article

  • Show Notes: Bob Hensle on IT Strategies from Oracle

    - by Bob Rhubart
    The latest ArchBeat Podcast (RSS) features a conversation with Oracle Enterprise Architecture director Bob Hensle (LinkedIn). Bob talks about IT Strategies from Oracle, an extensive library of reference architectures, best practices, and other documents now available (it’s a freebie!) to registered Oracle Technology Network members. Listen to Part 1 Bob offers some background on the IT Strategies from Oracle project and an overview of the included documents. Listen to Part 2 (Feb 16) A discussion of how SOA and other issues are reflected in the IT Strategies documents. Share your feedback on any of the documents in the IT Strategies from Oracle Library: [email protected] For a nice complement to the IT Strategies from Oracle Library, check out Oracle Experiences in Enterprise Architecture, an ongoing series of short essays from members of the Oracle Enterprise Architecture team based on their field experience. In the Pipeline ArchBeat programs in the works include an interview with Dr. Frank Munz, the author of Middleware and Cloud Computing, excerpts from another architect virtual meet-up, and a conversation with Oracle ACE Director Debra Lilley about her insight into Fusion Applications. . Stayed tuned: RSS Technorati Tags: oracle,oracle technology network,software architecture,enterprise architecture,reference architecture del.icio.us Tags: oracle,oracle technology network,software architecture,enterprise architecture,reference architecture

    Read the article

  • Podcast Show Notes: William Ulrich and Neal McWhorter on Business Architecture

    - by Bob Rhubart
    The latest ArchBeat podcast program features a four-part conversation with William Ulrich and Neal McWhorter, the authors of Business Architecture: The Art and Practice of Business Transformation, available from Meghan-Kiffer Press. Listen to Part 1 Bill and Neal cover the basics and discuss the effects of the lack of business architecture on organizations. Listen to Part 2 (Jan 19) What really happens to the billions of dollars annually invested in IT. Listen to Part 3 (Jan 26) Why the IT and business sides of many organizations can’t play nice. Listen to Part 4 (Feb 2) How IT architects and business architects can work together to get the ship back on course and keep it there. Connect William Ulrich Website | LinkedIn | Business Architecture Guild Neal McWhorter Website | LinkedIn | Business Architecture Group on OMG Coming Soon Bob Hensle, Director, Oracle Enterprise Architecture Group, discusses the recently launched IT Solutions from Oracle (ITSO) library of documents. Excerpts from a recent OTN Architect Community Virtual Meet-up. Stay tuned: RSS del.icio.us Tags: business architecture,enterprise architecture,arch2arch,archbeat,podcast,business transformation,oracle,oracle technology network Technorati Tags: business architecture,enterprise architecture,arch2arch,archbeat,podcast,business transformation,oracle,oracle technology network

    Read the article

  • Show Notes: Getting Past the Cloud Hype

    - by Bob Rhubart
    This week’s ArchBeat podcast features an unvarnished bit of conversation culled from a recent virtual meet-up. These meet-ups are informal conversations among architects, many of who have participated in previous ArchBeat programs. There’s no prearranged topic, so the participants talk about whatever is on their minds. The most recent meet-up included Oracle ACE Director Ran Batra, director of cloud computing product development with AT&T, and Daniel Templeton, principal product manager for Oracle Grid Engine, and the man behind Dan T’s GridBlog. The conversation took place at the end of the year – and the end of the decade – a time when most tech publications feature their predictions for the coming year.  I wanted a different spin on that theme, so I asked Ron and Dan to talk about the technologies about which they weren’t all that optimistic.   I found that ten-minute chunk of conversation particularly interesting, so that’s what you’re going to hear this week. Listen Get Social If you have questions or comment for Ron and/or Daniel you can connect via the following: Ron Batra Blog | Twitter | LinkedIn | Oracle Mix | Oracle ACE Profile Daniel Templeton Blog | Twitter | LinkedIn Coming Up Oracle ACE Director Debra Lilley talks about her role in the UKOUG’s development group and that group’s collaboration with Oracle on Oracle Fusion Applications. Dr Frank Munz, author of Middleware and Cloud Computing: Oracle Fusion Middleware on Amazon Web Services and Rackspace Cloud. Stay tuned: http://feeds2.feedburner.com/OtnArch2ArchRSS   del.icio.us Tags: oracle,oracle technology network,archbeat,cloud computing,software architect,podcast Technorati Tags: oracle,oracle technology network,archbeat,cloud computing,software architect,podcast

    Read the article

  • lost the vertical scroll function in touchpad after upgrading from 13.04 to 13.10

    - by Lars Lundblad
    just upgraded from Ubuntu 13.04 to Ubuntu 13.10, my Laptop is a Sony SVE1512c6ew, scrolling worked perfectly in Ubuntu 13.04, doesnt work at all in 13.10 Runs Ubuntu 13.10 64bits (btw, tested it i Windows 8 environment works there)Hardware OK, have seen a number of other users with the same problem, well for starters have followed the tip on using the dconf editor, following the path: org gnome settings-daemon peripherals touchpad boxed in all for sure... still cant get vertical scroll...... Any ideas??? Thanks in advance Lars Lundblad / please feel free to mail answers to [email protected] Input device information according to Udev: Input device Subsystem: input Devtype: n/a Name: input7 Number: 7 Sysfs_path: /sys/devices/platform/i8042/serio1/input/input7 Driver: n/a Action: n/a Seqnum: n/a Device type: n/a Device number: 0 Device file: n/a Device file symlinks: n/a Touchpad device Subsystem: input Devtype: n/a Name: mouse1 Number: 1 Sysfs_path: /sys/devices/platform/i8042/serio1/input/input7/mouse1 Driver: n/a Action: n/a Seqnum: n/a Device type: char Device number: 3361 Device file: /dev/input/mouse1 Device file symlinks: /dev/input/by-path/platform-i8042-serio-1-mouse

    Read the article

  • Podcast Show Notes: Architect Day Panel Highlights

    - by Bob Rhubart
    The 2010 series of Oracle Technology Network Architect Day events kicked off in May with events in Dallas, Texas, Redwood Shores, California, and Anaheim, California. The centerpiece of each Architect Day event is a panel discussion that brings together the day's various presenters along with experts drawn from the local Oracle community. This week’s ArchBeat program presents highlights from the panel discussion from the event held in Anaheim. Listen The voices you’ll hear in these highlights belong to (listed in order of appearance): Ralf Dossmann: Director of SOA and Middleware in Oracle’s Enterprise Solutions Group LinkedIn | Oracle Mix Floyd Teter: Innowave Technology, Oracle ACE Director Blog | Twitter | LinkedIn | Oracle Mix | Oracle ACE Profile Basheer Khan: Innowave Technology, Oracle ACE Director Blog | Twitter | LinkedIn | Oracle Mix | Oracle ACE Profile Jeff Savit:  Oracle virtualization expert, former Sun Microsystems principal engineer Blog | LinkedIn | Oracle Mix Geri Born: Oracle security analyst LinkedIn | A 10-minute podcast can't really do justice to the hour-long panel discussion at each Architect Day event, let alone the discussion that is characteristic of each session throughout each Architect Day. But at least you’ll get a taste of what you’ll find at the live events. You’ll find slide decks and more from this first series of 2010 events in the Architect Day Artifacts post on this blog. More dates/cities will be added soon to the Architect Day schedule.  Coming Soon Next week’s ArchBeat program kicks off a three-part series featuring Cameron Purdy,  Oracle ACE Director Aleksander Seovic, and Oracle ACE John Stouffer in a conversation about data grid technology and Oracle Coherence. Stay tuned: RSS Technorati Tags: oracle,oracle technology network,archbeat,arch2arch,podcast,architect day del.icio.us Tags: oracle,oracle technology network,archbeat,arch2arch,podcast,architect day

    Read the article

  • How do I get an Xstream mobile phone working as a modem?

    - by callmegus
    I bought a CDMA mobile phone that can use as modem, this http://smartfren.com/xstream/ and i wanna try it on my ubuntu plug usb , and run "lsusb" callmegus@Presario-CQ43-304AU:~$ lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 002: ID 058f:a001 Alcor Micro Corp. Bus 003 Device 002: ID 1bbb:0106 T & A Mobile Phones Bus 003 Device 003: ID 15d9:0a4c Trust International B.V. USB+PS/2 Optical Mouse Bus 004 Device 002: ID 0a5c:21e3 Broadcom Corp. I successfully "modprobe" this device, and connect to internet, but it's disconnected somehow .. and i can recconect it. I try "lsusb" again .. and something went wrong, here Bus 003 Device 002: ID 1bbb:1000 T & A Mobile Phones I do "modprobe" again and again , but it still won't connect Please guide me

    Read the article

  • external disk dont work on ubuntu

    - by Skirki
    i have problem with in my ubuntu: when i connect external imation apollo disc i dont see a file system. Disk is working because in windows OS on this same computer it works as well. when i typed dmesg i got following logs [12913.260078] usb 4-1: new low speed USB device using ohci_hcd and address 15 [12913.440072] usb 4-1: device descriptor read/64, error -62 [12913.730058] usb 4-1: device descriptor read/64, error -62 [12914.020085] usb 4-1: new low speed USB device using ohci_hcd and address 16 [12914.200082] usb 4-1: device descriptor read/64, error -62 [12914.490150] usb 4-1: device descriptor read/64, error -62 [12914.780064] usb 4-1: new low speed USB device using ohci_hcd and address 17 [12915.200070] usb 4-1: device not accepting address 17, error -62 [12915.380081] usb 4-1: new low speed USB device using ohci_hcd and address 18 [12915.800065] usb 4-1: device not accepting address 18, error -62 [12915.800100] hub 4-0:1.0: unable to enumerate USB device on port 1 i trying to fix that by use commands: cd /sys/bus/pci/drivers/ehci_hcd echo -n "0000:00:02.1" unbind but it did not match the result and i don't have any other idea

    Read the article

  • Reliable access to Internet but not local network (not DNS or proxy issues)

    - by Ian Goldby
    I'm looking for help with a Vista Home Premium laptop that has trouble accessing any resource on our home network, but accesses the Internet just fine. The set-up is this: The Vista laptop and a MacBook Pro connect wirelessly to the router-modem. A Synology DS212j NAS drive has a wired connection to the router-modem. Devices on the local network are always referred to by IP address, so this cannot be a DNS issue. The MacBook Pro connects reliably to the NA via AFP (network shared folders), SMB (network shared folders) and HTTP. The Vista laptop connects to and browses sites on the Internet without any problems. It can log into the NAS via SMB and list the shared folders (so there is nothing wrong with the log-in credentials), but when it tries to open any of the folders Explorer just hangs with the spinning cursor for several minutes and then says "\192.168.1.64\shared\Photos is not accessible. You might not have permission to use this network resource. Contact the administrator of this server to find out if you have access permissions. The specified network name is no longer available." It can ping the NAS successfully. If I try to open the NAS drive's web interface, the browser just hangs. This is the same with IE, Firefox and Chrome. (There is no proxy.) I can log into the NAS drive with FTP and navigate directories, but when I try to list the contents of a directory with more than a handful of entries, the ftp client hangs. I set up a website on the MacBook. The Vista laptop was able to load some of the pages, but loading any of the images was very hit and miss. Images embedded in HTML pages never worked no matter how many times I reloaded the page, but when I linked directly to the image it did load (though several attempts were sometimes needed). I tried all of this with the Windows Firewall turned off, and with AVG turned off. That made no difference. I'd really appreciate any suggestions anyone can make. The fact that the Vista laptop has trouble with HTTP and FTP as well as SMB connections suggests to me that this is a problem at the TCP level or below. But don't forget it accesses sites outside the LAN with no problems.

    Read the article

  • Minimum cost strongly connected digraph

    - by Kazoom
    I have a digraph which is strongly connected (i.e. there is a path from i to j and j to i for each pair of nodes (i, j) in the graph G). I wish to find a strongly connected graph out of this graph such that the sum of all edges is the least. To put it differently, I need to get rid of edges in such a way that after removing them, the graph will still be strongly connected and of least cost for the sum of edges. I think it's an NP hard problem. I'm looking for an optimal solution, not approximation, for a small set of data like 20 nodes. Edit A more general description: Given a grap G(V,E) find a graph G'(V,E') such that if there exists a path from v1 to v2 in G than there also exists a path between v1 and v2 in G' and sum of each ei in E' is the least possible. so its similar to finding a minimum equivalent graph, only here we want to minimize the sum of edge weights rather than sum of edges. Edit: My approach so far: I thought of solving it using TSP with multiple visits, but it is not correct. My goal here is to cover each city but using a minimum cost path. So, it's more like the cover set problem, I guess, but I'm not exactly sure. I'm required to cover each and every city using paths whose total cost is minimum, so visiting already visited paths multiple times does not add to the cost.

    Read the article

  • iproute2 not functioning ("RTNETLINK answers: Operation not supported")

    - by James Watt
    The command and error message: gtwy ~ # ip rule add from 64.251.23.186 table t1 RTNETLINK answers: Operation not supported Older article of the same problem, but it did not help me: http://forums.gentoo.org/viewtopic-t-696982-start-0-postdays-0-postorder-asc-highlight-.html I have looked on google at great lengths to try to find a solution. It seems that my kernel configuration is missing something? Any help or ideas would be appreciated. My system/kernel is: 2.6.36-gentoo-r5 #3 SMP Thu Jan 13 10:49:06 EST 2011 x86_64 Intel(R) Xeon(R) CPU X3220 @ 2.40GHz GenuineIntel GNU/Linux. I am posting this on SuperUser since this system is used as a workstation and this problem is unrelated to specific tasks that are handled exclusively by servers. iproute2 is installed: gtwy etc # emerge --search iproute2 Searching... [ Results for search key : iproute2 ] [ Applications found : 1 ] * sys-apps/iproute2 Latest version available: 2.6.35-r2 Latest version installed: 2.6.35-r2 Size of files: 378 kB Homepage: http://www.linuxfoundation.org/collaborate/workgroups/networking/iproute2 Description: kernel routing and traffic control utilities License: GPL-2 A small snippet of my kernel .config (view entire .config): gtwy linux # cat .config | grep NETLINK CONFIG_NETFILTER_NETLINK=y CONFIG_NETFILTER_NETLINK_QUEUE=y CONFIG_NETFILTER_NETLINK_LOG=y CONFIG_NF_CT_NETLINK=y CONFIG_SCSI_NETLINK=y gtwy linux # cat .config | grep IP_ADVANCED_ROUTER CONFIG_IP_ADVANCED_ROUTER=y gtwy linux # cat .config | grep INGRESS CONFIG_NET_SCH_INGRESS=y gtwy linux # cat .config | grep NET_SCHED CONFIG_NET_SCHED=y emerge --info Portage 2.1.9.25 (default/linux/amd64/10.0, gcc-4.1.2, glibc-2.10.1-r1, 2.6.36-gentoo-r5 x86_64) ================================================================= System uname: Linux-2.6.36-gentoo-r5-x86_64-Intel-R-_Xeon-R-_CPU_X3220_@_2.40GHz-with-gentoo-1.12.13 Timestamp of tree: Thu, 13 Jan 2011 01:15:01 +0000 app-shells/bash: 4.0_p37 dev-java/java-config: 1.3.7-r1, 2.1.10 dev-lang/python: 2.4.6, 2.5.4-r4, 2.6.5-r2, 3.1.2-r3 sys-apps/baselayout: 1.12.13 sys-apps/sandbox: 1.6-r2 sys-devel/autoconf: 2.13, 2.65 sys-devel/automake: 1.9.6-r2::<unknown repository>, 1.10.2, 1.11.1 sys-devel/binutils: 2.20.1-r1 sys-devel/gcc: 4.1.2, 4.3.4, 4.4.3-r2 sys-devel/gcc-config: 1.4.1 sys-devel/libtool: 2.2.6b sys-devel/make: 3.81 virtual/os-headers: 2.6.30-r1 (sys-kernel/linux-headers) ACCEPT_KEYWORDS="amd64" ACCEPT_LICENSE="*" CBUILD="x86_64-pc-linux-gnu" CFLAGS="-march=nocona -O2 -pipe" CHOST="x86_64-pc-linux-gnu" CONFIG_PROTECT="/etc /var/bind" CONFIG_PROTECT_MASK="/etc/ca-certificates.conf /etc/env.d /etc/env.d/java/ /etc/fonts/fonts.conf /etc/gconf /etc/php/apache2-php5/ext-active/ /etc/php/cgi-php5/ext-active/ /etc/php/cli-php5/ext-active/ /etc/revdep-rebuild /etc/sandbox.d /etc/terminfo" CXXFLAGS="-march=nocona -O2 -pipe" DISTDIR="/usr/portage/distfiles" FEATURES="assume-digests binpkg-logs distlocks fixlafiles fixpackages news parallel-fetch protect-owned sandbox sfperms strict unknown-features-warn unmerge-logs unmerge-orphans userfetch" GENTOO_MIRRORS="http://gentoo.chem.wisc.edu/gentoo" LC_ALL="en_US.UTF-8" LDFLAGS="-Wl,-O1 -Wl,--as-needed" LINGUAS="en" MAKEOPTS="-j5" PKGDIR="/usr/portage/packages" PORTAGE_CONFIGROOT="/" PORTAGE_RSYNC_OPTS="--recursive --links --safe-links --perms --times --compress --force --whole-file --delete --stats --timeout=180 --exclude=/distfiles --exclude=/local --exclude=/packages" PORTAGE_TMPDIR="/var/tmp" PORTDIR="/usr/portage" PORTDIR_OVERLAY="/usr/local/portage" SYNC="rsync://rsync.namerica.gentoo.org/gentoo-portage" USE="acl amd64 apache2 berkdb bzip2 cli cracklib crypt ctype cups curl cxx dri fortran gdbm gpm iconv jpeg jpeg2k libwww mmx modules mudflap multilib mysql ncurses nls nptl nptlonly openmp pam pcre perl php png pppd python readline session sockets sse sse2 ssl symlink sysfs tcpd threads unicode vhosts xml xorg xsl zlib" ALSA_CARDS="ali5451 als4000 atiixp atiixp-modem bt87x ca0106 cmipci emu10k1x ens1370 ens1371 es1938 es1968 fm801 hda-intel intel8x0 intel8x0m maestro3 trident usb-audio via82xx via82xx-modem ymfpci" ALSA_PCM_PLUGINS="adpcm alaw asym copy dmix dshare dsnoop empty extplug file hooks iec958 ioplug ladspa lfloat linear meter mmap_emul mulaw multi null plug rate route share shm softvol" APACHE2_MODULES="actions alias auth_basic authn_alias authn_anon authn_dbm authn_default authn_file authz_dbm authz_default authz_groupfile authz_host authz_owner authz_user autoindex cache cgi cgid dav dav_fs dav_lock deflate dir disk_cache env expires ext_filter file_cache filter headers include info log_config logio mem_cache mime mime_magic negotiation rewrite setenvif speling status unique_id userdir usertrack vhost_alias" COLLECTD_PLUGINS="df interface irq load memory rrdtool swap syslog" ELIBC="glibc" GPSD_PROTOCOLS="ashtech aivdm earthmate evermore fv18 garmin garmintxt gpsclock itrax mtk3301 nmea ntrip navcom oceanserver oldstyle oncore rtcm104v2 rtcm104v3 sirf superstar2 timing tsip tripmate tnt ubx" INPUT_DEVICES="keyboard mouse evdev" KERNEL="linux" LCD_DEVICES="bayrad cfontz cfontz633 glk hd44780 lb216 lcdm001 mtxorb ncurses text" LINGUAS="en" PHP_TARGETS="php5-3" RUBY_TARGETS="ruby18" USERLAND="GNU" VIDEO_CARDS="fbdev glint intel mach64 mga neomagic nouveau nv r128 radeon savage sis tdfx trident vesa via vmware dummy v4l" XTABLES_ADDONS="quota2 psd pknock lscan length2 ipv4options ipset ipp2p iface geoip fuzzy condition tee tarpit sysrq steal rawnat logmark ipmark dhcpmac delude chaos account" Unset: CPPFLAGS, CTARGET, EMERGE_DEFAULT_OPTS, FFLAGS, INSTALL_MASK, LANG, PORTAGE_BUNZIP2_COMMAND, PORTAGE_COMPRESS, PORTAGE_COMPRESS_FLAGS, PORTAGE_RSYNC_EXTRA_OPTS

    Read the article

  • Mysql: Perform of NOT EXISTS. Is it possible to improve permofance?

    - by petRUShka
    I have two tables posts and comments. Table comments have post_id attribute. I need to get all posts with type "open", for which there are no comments with type "good" and created date MAY 1. Is it optimal to use such SQL-query: SELECT posts.* FROM posts WHERE NOT EXISTS ( SELECT comments.id FROM comments WHERE comments.post_id = posts.id AND comments.comment_type = 'good' AND comments.created_at BETWEEN '2010-05-01 00:00:00' AND '2010-05-01 23:59:59') I'm not sure that NOT EXISTS is perfect construction in this situation.

    Read the article

  • Pairing Bluetooth device with PIN fails

    - by Pikaro
    I'm trying to pair my old BlackBerry 8310 to my Linux desktop (up-to-date Debian Sid, 3.15-10.dmz.1-liquorix-amd64) by using blueman and its associated tools. Scanning for the device works equally well for both sides; however, I am unable to pair the two once it comes to entering the PIN. If I scan from my PC, I have two options in blueman-manager regarding my phone: Directly selecting "pair", or selecting "setup". If I select "pair", nothing happens on my desktop, but the phone asks me to enter a PIN; if I do so, it reports that pairing has failed. During that, nothing is logged to the console. Selecting "setup" opens a configuration dialog that allows for entering or generating a PIN. Regardless, I get to a screen that tells me to enter the PIN on the phone, and at the same time, the phone pops up the equivalent dialog. This would be what one would expect to work; but whatever I enter (naturally, the same on both), both devices report that pairing has failed, and blueman-manager logs init_services (/usr/lib/python2.7/dist-packages/blueman/main/Device.py:73) Loading services org.bluez.Error.AuthenticationFailed: Authentication Failed If I instead try to pair from the phone, I cannot see any kind of reaction from my desktop - all I get is the equivalent "pairing failed" message from the BlackBerry after I entered a PIN in the dialog that pops up there. hcitool scan and hciconfig -a work without complaints, but I cannot find a way to try the pairing as a whole on the console since bluez-simple-agent seems to have been discontinued and this recommendation is everywhere on Google. hcitool cc as root opens the PIN dialog on the phone, then fails with "Input/Output error" once I enter it. The user is not permitted to execute this command. I also tried creating /usr/lib/bluetooth/<MAC>/pincodes to manually define a persistent PIN, which seems to have had no effect. The same goes for running the different commands as root, though I'm really confused about the internal structure of the Bluetooth subsystem now: They usually and inconsistently failed with Python or DBUS errors or just showed the same results. The only other Bluetooth device I have around are a pair of Creative speakers. Trying "setup" asks me to enter a key on them, which is impossible. If I try "pair", I'm asked for a PIN as I should, but no pairing takes place, and no errors appear on the console. (It just repeats their name a few times.) Interestingly, I tried that before writing my question, and nothing happened in terms of PIN questions, just like with the BlackBerry, which still shows no change. I don't think I actively changed anything since then. The BlackBerry can pair with and connect to the speakers, and everything goes as one would expect, so the problem is definitely with my desktop. So thus my questions: What is that PIN window generated by, and why does it seem to appear randomly? How can I find out what, exactly, fails after trying to add the speakers, as this may give me a clue? Is there any kind of complete log that concerns itself with Bluetooth? What data can I provide to make this more solvable?

    Read the article

  • How do I correctly use two Not Exists statements in a where clause using Access SQL VBA?

    - by Bryan
    I have 3 Tables: NotHeard,analyzed,analyzed2. In each of these tables I have two columns named UnitID and Address. What I'm trying to do right now is to select all of the records for the columns UnitID and Address from NotHeard that don't appear in either analyzed or analyzed2. The SQL statement I created was as follows: SELECT UnitID, Address INTO [NotHeardByEither] FROM [NotHeard] Where NOT EXISTS( Select analyzed.UnitID FROM analyzed WHERE [NotHeard].UnitID = analyzed.UnitID) or NOT EXISTS( Select analyzed2.UnitID FROM analyzed2 WHERE [NotHeard].UnitID = analyzed2.UnitID) Group BY UnitID, Address I thought this would work since I've used the single NOT EXISTS subquery line and it has worked just fine for me in the past. The above query however returns the same data that is in the NotHeard table whereas if I take out the or NOT EXISTS part it works correctly. Any ideas as to what I'm doing wrong or how to do what I'm wanting to do?

    Read the article

  • Sendmail not working from local PHP when headers not specified

    - by Dan
    Hi. I'm having trouble getting my local XAMPP server to send emails via my remote SMTP server. In PHP, if I put: $headers = "From: [email protected]\r\n"; mail('[email protected]', 'test', '', $headers); Then this works. However, if I don't specify the header, ie.: mail('[email protected]', 'test', ''); Then this fails. The sendmail.log file says: smtpstatus=554 smtpmsg='554 Message refused.' errormsg='the server did not accept the mail' exitcode=EX_UNAVAILABLE I've tried changing my sendmail command in my php.ini to: sendmail_path = "C:/xampp/sendmail/sendmail.exe -t -f [email protected]" but this doesn't work either. Thanks for any help with this, Dan. ps. this is on windows.

    Read the article

  • Trouble using remote desktop when connected via Cisco VPN

    - by Kyle B.
    I just setup my Cisco VPN and everything appears to be working fine. I opened the 'remote desktop' application and am unable to connect to my work desktop machine. When I disable Windows Firewall, I am able to connect, but not when Firewall is enabled. Is there a specific settings inside Windows 7 Firewall that should I be enabling or disabling for this to work without having to shut down the entire system? I can post this in superuser.com instead if you feel it belongs there, but posted here due to it being related to VPN and Firewall. Thanks, Kyle

    Read the article

  • UDP packets to IP addresses other than specific ones not arriving and not shown in Wireshark

    - by Max
    I'm writing a service using UDP, but I can't manage to reply to the client. When sending to the client via the DHCP-assigned IP (192.168.1.143) Wireshark shows no sent packets. The server receives and Wireshark shows any packet sent by the client (broadcasted). If I send to a random, unassigned IP Wireshark doesn't show it. I thought the NIC would happily send it, since there is a router in the way - shouldn't Wireshark show it, even though it cannot possibly be received by a remote endpoint? If I send to either the router IP or another (specific, there is only one other) computer, the packet is shown in Wireshark. I am running Windows 7, the firewall is turned off using the control panel. Does the fact that wireshark doesn't show these packets mean that they aren't sent? What reason could there be for showing packets to one IP, but not another, on the same subnet?

    Read the article

  • Users not getting ip when connected through wifi,but wired connection getting ip in ddwrt router

    - by Kevin Parker
    I am having DD-WRT v24-sp2(05/08/11) running on Asus RT n 13 u B1 router,with dhcp on. But users not able to connect through wifi...its showing obtaining ip address and disconnects there after. Wired Devices are getting ip address and able to access internet.Wifi was working till yesterday,but all of a sudden it stopped working. on the ddwrt controlpanelsystem information under Wireless Clients mac address of clients that are trying to connect are appearing but soon it disappears. but no such issue with wired clients. Can any one please help me in fixing this..

    Read the article

  • Laptop not charging when connected to mains outlet

    - by Josh
    I've had this laptop for a few weeks now, it's a Sony Vaio. I went to charge it a few days ago and plugged in the power cable, but it's not charging. The battery icon in the Windows taskbar to the bottom right says it's plugged in and charging, but the charge level never goes above 2%. I have checked and I don't have a hcarging switch on the laptop anywhere, so it should be charging. If I unplug the cable, the laptop runs out of power within 30 seconds or so, further fueling my thought that it's a faulty battery. Anyone have any bright ideas? If this doesn't get fixed I'll just ring up Sony and get them to send me a replacement battery or something. Thanks.

    Read the article

  • ldirectord ipvsadm not show reals ip and not work wtih pacemaker and corosync

    - by miguer27
    first thanks for your time. I'm having a problem with ldirectord that I can not solve, I comment my situation: I have two nodes with pace maker and corosync and configure somes resources: root@ldap1:/home/mamartin# crm status Last updated: Tue Jun 3 12:58:30 2014 Last change: Tue Jun 3 12:23:47 2014 via cibadmin on ldap1 Stack: openais Current DC: ldap2 - partition with quorum Version: 1.1.7-ee0730e13d124c3d58f00016c3376a1de5323cff 2 Nodes configured, 2 expected votes 7 Resources configured. Online: [ ldap1 ldap2 ] Resource Group: IPV_LVS IPV_4 (ocf::heartbeat:IPaddr2): Started ldap1 IPV_6 (ocf::heartbeat:IPv6addr): Started ldap1 lvs (ocf::heartbeat:ldirectord): Started ldap1 Clone Set: clon_IPV_lo [IPV_lo] Started: [ ldap2 ] Stopped: [ IPV_lo:1 ] root@ldap1:/home/mamartin# crm configure show node ldap2 \ attributes standby="off" node ldap1 \ attributes standby="off" primitive IPV-lo_4 ocf:heartbeat:IPaddr \ params ip="192.168.1.10" cidr_netmask="32" nic="lo" \ op monitor interval="5s" primitive IPV-lo_6 ocf:heartbeat:IPv6addrLO \ params ipv6addr="[fc00:1::3]" cidr_netmask="64" \ op monitor interval="5s" primitive IPV_4 ocf:heartbeat:IPaddr2 \ params ip="192.168.1.10" nic="eth0" cidr_netmask="25" lvs_support="true" \ op monitor interval="5s" primitive IPV_6 ocf:heartbeat:IPv6addr \ params ipv6addr="[fc00:1::3]" nic="eth0" cidr_netmask="64" \ op monitor interval="5s" primitive lvs ocf:heartbeat:ldirectord \ params configfile="/etc/ldirectord.cf" \ op monitor interval="20" timeout="10" \ meta target-role="Started" group IPV_LVS IPV_4 IPV_6 lvs group IPV_lo IPV-lo_6 IPV-lo_4 clone clon_IPV_lo IPV_lo \ meta interleave="true" target-role="Started" location cli-prefer-IPV_LVS IPV_LVS \ rule $id="cli-prefer-rule-IPV_LVS" inf: #uname eq ldap1 colocation LVS_no_IPV_lo -inf: clon_IPV_lo IPV_LVS property $id="cib-bootstrap-options" \ dc-version="1.1.7-ee0730e13d124c3d58f00016c3376a1de5323cff" \ cluster-infrastructure="openais" \ expected-quorum-votes="2" \ no-quorum-policy="ignore" \ stonith-enabled="false" \ last-lrm-refresh="1401264327" rsc_defaults $id="rsc-options" \ resource-stickiness="1000" The problem is in the ipvsadm only show a one real IP, when i configured two now, show the ldirector.cf: root@ldap1:/home/mamartin# ipvsadm IP Virtual Server version 1.2.1 (size=4096) Prot LocalAddress:Port Scheduler Flags - RemoteAddress:Port Forward Weight ActiveConn InActConn TCP ldap-maqueta.cica.es:ldap wrr - ldap2.cica.es:ldap Route 4 0 0 TCP [[fc00:1::3]]:ldap wrr - [[fc00:1::2]]:ldap Route 4 0 0 root@ldap1:/home/mamartin# cat /etc/ldirectord.cf checktimeout=10 checkinterval=2 autoreload=yes logfile="/var/log/ldirectord.log" quiescent=yes #ipv4 virtual=192.168.1.10:389 real=192.168.1.11:389 gate 4 real=192.168.1.12:389 gate 4 scheduler=wrr protocol=tcp checktype=on #ipv6 virtual6=[[fc00:1::3]]:389 real6=[[fc00:1::1]]:389 gate 4 real6=[[fc00:1::2]]:389 gate 4 scheduler=wrr protocol=tcp checkport=389 checktype=on and in the logs I see nothing clear: root@ldap1:/home/mamartin# ldirectord -d /etc/ldirectord.cf start DEBUG2: Running system(/sbin/ipvsadm -a -t 192.168.1.10:389 -r 192.168.1.11:389 -g -w 0) Running system(/sbin/ipvsadm -a -t 192.168.1.10:389 -r 192.168.1.11:389 -g -w 0) DEBUG2: Quiescent real server: 192.168.1.11:389 (192.168.1.10:389) (Weight set to 0) Quiescent real server: 192.168.1.11:389 (192.168.1.10:389) (Weight set to 0) DEBUG2: Disabled real server=on:tcp:192.168.1.11:389:::4:gate:\/: (virtual=tcp:192.168.1.10:389) DEBUG2: Running system(/sbin/ipvsadm -a -t 192.168.1.10:389 -r 192.168.1.12:389 -g -w 0) Running system(/sbin/ipvsadm -a -t 192.168.1.10:389 -r 192.168.1.12:389 -g -w 0) DEBUG2: Quiescent real server: 192.168.1.12:389 (192.168.1.10:389) (Weight set to 0) Quiescent real server: 192.168.1.12:389 (192.168.1.10:389) (Weight set to 0) DEBUG2: Disabled real server=on:tcp:192.168.1.12:389:::4:gate:\/: (virtual=tcp:192.168.1.10:389) DEBUG2: Checking on: Real servers are added without any checks DEBUG2: Resetting soft failure count: 192.168.1.12:389 (tcp:192.168.1.10:389) Resetting soft failure count: 192.168.1.12:389 (tcp:192.168.1.10:389) DEBUG2: Running system(/sbin/ipvsadm -a -t 192.168.1.10:389 -r 192.168.1.12:389 -g -w 4) Running system(/sbin/ipvsadm -a -t 192.168.1.10:389 -r 192.168.1.12:389 -g -w 4) Destination already exists root@ldap1:/home/mamartin# cat /var/log/ldirectord.log [Tue Jun 3 09:39:29 2014|ldirectord.cf|19266] Quiescent real server: 192.168.1.11:389 (192.168.1.10:389) (Weight set to 0) [Tue Jun 3 09:39:29 2014|ldirectord.cf|19266] Quiescent real server: 192.168.1.12:389 (192.168.1.10:389) (Weight set to 0) [Tue Jun 3 09:39:29 2014|ldirectord.cf|19266] Resetting soft failure count: 192.168.1.12:389 (tcp:192.168.1.10:389) [Tue Jun 3 09:39:29 2014|ldirectord.cf|19266] system(/sbin/ipvsadm -a -t 192.168.1.10:389 -r 192.168.1.12:389 -g -w 4) failed: [Tue Jun 3 09:39:29 2014|ldirectord.cf|19266] Added real server: 192.168.1.12:389 (192.168.1.10:389) (Weight set to 4) [Tue Jun 3 09:39:29 2014|ldirectord.cf|19266] Resetting soft failure count: 192.168.1.11:389 (tcp:192.168.1.10:389) [Tue Jun 3 09:39:29 2014|ldirectord.cf|19266] Restored real server: 192.168.1.11:389 (192.168.1.10:389) (Weight set to 4) [Tue Jun 3 09:39:29 2014|ldirectord.cf|19266] Resetting soft failure count: [[fc00:1::2]]:389 (tcp:[[fc00:1::3]]:389) [Tue Jun 3 09:39:29 2014|ldirectord.cf|19266] system(/sbin/ipvsadm -a -t [[fc00:1::3]]:389 -r [[fc00:1::2]]:389 -g -w 4) failed: [Tue Jun 3 09:39:29 2014|ldirectord.cf|19266] Added real server: [[fc00:1::2]]:389 ([[fc00:1::3]]:389) (Weight set to 4) [Tue Jun 3 09:39:29 2014|ldirectord.cf|19266] Resetting soft failure count: [[fc00:1::1]]:389 (tcp:[[fc00:1::3]]:389) [Tue Jun 3 09:39:29 2014|ldirectord.cf|19266] Restored real server: [[fc00:1::1]]:389 ([[fc00:1::3]]:389) (Weight set to 4) do not know if this is a bug or a configuration error, can anyone help? Regards.

    Read the article

  • Windows 7 Reinstalling Hardware - How...?

    - by Ative
    I wanted to install a new driver for my Wireless Network Card but Windows 7 reported the driver was up to date. So I decided to uninstall the driver. That seemed to do more than I expected... My WiFi card no longer shows up on the computer. Nothing in Device Manager. I have no idea how to get it back. How can I get Windows to find the device? :/

    Read the article

  • Can't install Ubuntu 12 into VirtualBox (USB not recognized, ISO would not boot)

    - by wvxvw
    I'm trying out VirtualBox 4.18 and wanted to install Ubuntu 12 as a test. After installing VirtualBox (on Debian squeeze/sid), creating a virtual machine for Ubuntu and pointing it in Settings Storage IDE Controllers to the ISO with the proper version of Ubuntu, checked the "Live CD" option. Tried to define the IDE as master / slave, primary / secondary - all to no effect, and trying to boot this system, I'm getting to the screen which says: FATAL: could not read from the boot medium! System halted I've copied the same ISO to the USB stick, and I can boot from the USB (outside VirtualBox). I've looked at couple of tutorials / walk-through, there's nothing I can see that I would've done wrong. So, how would I configure it to boot from the desired ISO? Below is the snapshot with the current settings (sorry, I don't know how to get them as text).

    Read the article

  • servers connected to a poweredge 6248 receive traffic for their 'neighbours'

    - by Hannes
    In the network we have a few vlans but at the moment I was investigating vlan2 which carries the most traffic. When tcpdumping on the eth0.2 interface, I see a lot of packets arriving which are not addressed to, nor coming from the server. I checked this on several servers in the network and they all have the same issues. In short, our switches don't switch the traffic but threat it like they are a hub. Can you tell me what settings on the dell poweredge 6248 should prevent this behaviour?

    Read the article

< Previous Page | 34 35 36 37 38 39 40 41 42 43 44 45  | Next Page >