Search Results

Search found 2451 results on 99 pages for 'guest additions'.

Page 38/99 | < Previous Page | 34 35 36 37 38 39 40 41 42 43 44 45  | Next Page >

• VMWare workstation: from command line, how to start a VM in service mode (run in background)?

  - by GenEric35

  Hi, I have tried the vmrun and vmware.exe executables, but both of them start the vmware GUI when starting the VM. What I want to do is start the VM without starting the VMWare GUI. The reason I am doing this is after a few hours of idle, the guest OS becomes sluggish. It has lots of RAM but the only way I found to keep it's responsiveness optimal is to shutdown(dumps the memory) and the start; a restart of the guest OS doesnt dump the memory so I need to be able to do a stop of the VM, and then a start. So far the command I use are: C:\Program Files (x86)\VMware\VMware Workstationvmrun stop F:\VirtualMachines\R2\R2.vmx C:\Program Files (x86)\VMware\VMware Workstationvmrun start F:\VirtualMachines\R2\R2.vmx But the start command actually starts the VMWare Workstation GUI, which I don't need. I'm looking for a solution to start the VM without the VMWare Wokstation GUI, or a solution to what is causing the VM to become sluggish after a few hours of running idle.

  Read the article

• Hyper-V Deployment Options Best Practices

  - by Erv Walter

  In what circumstances would you choose each of the following deployment options: Hyper-V installed as the bare bones Windows Hyper-V Server 2008 R2 Hyper-V role installed on a Windows Server 2008 R2 Server Core installation Hyper-V role installed on a Windows Server 2008 R2 Full Installation For example, I know there are licensing considerations for each option: With Hyper-V on top of a full installation of Enterprise or Data Center edition, you can use Windows Server as a guest OS without needing additional licenses (4 for Enterprise, unlimited for Data Center) With "Windows Hyper-V Server" you have to obtain licenses for each guest OS. But my real question is, are there technical considerations as well? I understand that the Full Installation doesn't perform as well as the other two options, but is there a significant difference between Server Core and "Windows Hyper-V Server"? What are the pros and cons of Hyper-V on Server Core vs "Windows Hyper-V Server" and when would you choose each?

  Read the article

• Virtual Machine Manager 2012 is showing 0% CPU usage

  - by Mark Henderson

  When trying to do some science to answer this question, I took a Windows 7 guest on a Server 2008 R2 host being managed by SCVMM 2012 and ran Prime95 on it to just generate some CPU usage. Here's the Guest: The Hyper-V host shows 12%, which is 1/8 cores (which is what is allocated), so that's looking correct: But SCVMM is showing 0%: I have left the stress test running for a long time, thinking that maybe SCVMM averages out over a long time (I thought it was 9 minutes, but I've been known to be wrong; just don't tell my wife). Why is SCVMM showing 0% when everything else seems to disagree?

  Read the article

• Why does mpstat show different values when I use the interval setting?

  - by Abe

  Here's the output I get when I run mpstat: $mpstat Linux 3.2.0-30-generic (my-laptop-C650) 09/17/2012 _x86_64_ (2 CPU) 05:32:01 PM CPU %usr %nice %sys %iowait %irq %soft %steal %guest %idle 05:32:01 PM all 9.16 0.08 2.69 2.00 0.00 0.04 0.00 0.00 86.02 And here's what I get when I run it with a one-second interval: $mpstat 1 05:31:51 PM CPU %usr %nice %sys %iowait %irq %soft %steal %guest %idle 05:31:52 PM all 1.52 0.00 1.01 0.00 0.00 0.00 0.00 0.00 97.47 05:31:53 PM all 2.04 0.00 1.02 0.00 0.00 0.00 0.00 0.00 96.94 05:31:54 PM all 1.50 0.00 1.50 0.00 0.00 0.00 0.00 0.00 97.00 Why does the first process show the processor as 86% idle, and the second show it as ~97% idle? I've tried this in a bunch of different configurations, and it's not a real difference in CPU usage -- unless mpstat itself is making the difference. Which number should I trust?

  Read the article

• Parallel Desktops: installing Parallel Tools on Ubuntu

  - by Patrick

  hi, I get the following error when I try to install Parallel Tools on my Ubuntu in Parallel Desktop. I follow the istructions, running sh install from terminal: I follow the UI istructions and then the installation stops with this error message: E: Couldn't find package dkms Fri May 7 14:34:20 PDT 2010 Start installation or upgrade of Guest Tools Installed Guest Tools were not found Perform installation into the /usr/lib/parallels-tools directory cat: /usr/lib/parallels-tools/kmods/../version: No such file or directory Start installation of prl_eth kernel module make: Entering directory `/usr/lib/parallels-tools/kmods' cd prl_eth/pvmnet && make make[1]: Entering directory `/usr/lib/parallels-tools/kmods/prl_eth/pvmnet' make -C /lib/modules/2.6.32-21-generic/build M=/usr/lib/parallels-tools/kmods/prl_eth/pvmnet make[2]: Entering directory `/usr/src/linux-headers-2.6.32-21-generic' LD /usr/lib/parallels-tools/kmods/prl_eth/pvmnet/built-in.o CC [M] /usr/lib/parallels-tools/kmods/prl_eth/pvmnet/pvmnet.o LD [M] /usr/lib/parallels-tools/kmods/prl_eth/pvmnet/prl_eth.o Building modules, stage 2. MODPOST 1 modules WARNING: modpost: missing MODULE_LICENSE() in /usr/lib/parallels-tools/kmods/prl_eth/pvmnet/prl_eth.o thanks

  Read the article

• Multiple vlan issue with procurve switch

  - by Chris-AZ

  I have a cisco asa5505 as my rtr/fw(10.1.3.254). I have vlan 1 and vlan 3. Vlan 1 is my default all access vlan. Vlan 3 is my Guest(dmz) vlan. I can't seem to get a dhcp ip address when my laptop is plugged into port 42 on my procurve. I have plugged my laptop directly into the firewall and it gets a dhcp ip fine(the firewall is dhcp server). the firewall is plugged into port 41. Only vlan3 needs to go over port 41. I'm sure I have a bonehead config problem however I'm about ready to pull out what little hair I have left. vlan 1 name "Computers" forbid 45 untagged 1-41,43-44 ip helper-address 10.1.1.16 ip address 10.1.1.1 255.255.255.0 tagged 46-48 no untagged 42,45 exit vlan 3 name "Guest Wireless" ip helper-address 10.1.3.254 ip address 10.1.3.1 255.255.255.0 tagged 41-42,44-48 exit

  Read the article

• Virtual Box Pen Test Lab Set Up

  - by hairyjewbear

  So i'm trying to set up a pen test lab in virtual box on my windows 7 host. I have 3 guest OS's installed: 1.) BackTrack5 2.) Centos 5 Server/Snort (My Snortbox) 3.) Win XP (Unpatched) I have 3 Ethernet adapters created IP'S 192.168.191.1 192.168.127.1 192.168.56.1 My goal is to use BackTrack5 to nmap the Win XP guest and have the snort box sniff the network. I'm new to networking and virtualization and I need help setting up my virtual network to get this to work. What should I do? All help appreciated Centos: Adapter1: NAT Adapter2: Host-only Adapter3: Internal Network Backtrack: Adapter1: Internal Network XP: Adapter1: Internal Network Also take for granted I'm on a University Network with a ridiculous firewall so I need to stay all within the host

  Read the article

• Growing the size of a VM's disk in VMware

  - by soandos

  I have a VM that I originally gave 10 GB to (using VMware workstation, and Ubuntu 11.10 is the guest OS). I now wish to add to that. I have seen the option to expand the disk size, but all that does is create a new "partition" that Ubuntu can see. Is there a way to expand the size of the primary partition that the guest OS is using? NOTE: I have seen something regarding doing this for a regular Ubunbu OS that requires a boot disk. Is there a way that I can apply that to this VM case? Using Windows 7 64-bit as the host OS EDIT: To be clear, I am trying to resize the boot partition. Edit 2: GParted's resize option is greyed out.

  Read the article

• Two domains, two servers, one dynamic IP address

  - by giantman

  I have two domains hi.org and bye.net and one dynamic IP address and two servers. I want to attach one domain bye.net to server1 and hi.org to server2. I'm using Apache wamp 2.0i. I have two servers behind one router with a dynamic IP address #httpd.conf file additions <IfModule mod_proxy.c> ProxyRequests Off <Proxy *> Order deny,allow Allow from all </Proxy> </IfModule> #vhost file additions NameVirtualHost *:80 #default <VirtualHost *:80> DocumentRoot "c:/wamp/www/fallback" </VirtualHost> # Server 1 <VirtualHost *:80> DocumentRoot "c:/wamp/www" ServerName h**p://bye.net ServerAlias bye.net </VirtualHost> # Server 2 <VirtualHost *:80> ProxyPreserveHost On ProxyPass / h**p://192.168.1.119/ DocumentRoot "g:/wamp/www" ServerName h**p://hi.org ServerAlias hi.org </VirtualHost> After doing all this I fallback to server1 only I don't get the page hi.org I only get the page bye.net, I don't even get the default fallback page which gets executed when a person enters IP address but not the domain name. I use Windows 7 (server 2) and Windows XP (server 1) UPDATE: I needed to remove DocumentRoot "g:/wamp/www" line :D it was there by mistake! things are working fine now. But one thing: the URL gets replaced by the local ip address any way to not make that happen?

  Read the article

• KVM online disk resize?

  - by Eil

  We're evaluting KVM for Linux virtualization on a few projects. All is going well so far. But one of our requirements is the ability to add disk space to a running guest without rebooting or taking it offline. Is this possible with KVM? The only thing I've found so far (but have not tested yet) is the ability to hotplug disks into the machine. If I go this route, then I could always add the new disk to an LVM volume group on the guest and then extend the chosen logical volume. The biggest downside to this approach is that over time we might end up with guests having variable numbers of virtual disks. The "real" disk space would be provided to the host over a SAN, so we can always add more space to the host whenever.

  Read the article

• Windows 7 locked out account

  - by Lukas

  I have a Win7 x64 computer. There was only one account (mine, created at installation, password protected, full administrative access with UAC enabled). To speed up the startup + login process I went to control userpasswords2 and unchecked that users need to enter password. By this operation my account has been changed to Guest type and an Administrator account has been created. This Administrator account has a small overlay icon with a downwards pointing arrow. My original password did not work; if I try leaving the password blank it says something like "Your account has been disabled. Contact your administrator." Contacting myself surprisingly did not help. As my account (which I am still able to access) is Guest, I have no rights to do anything. Is there a way to get my access back without reinstalling?

  Read the article

• Ubuntu not connecting to network in Hyper-V

  - by soandos

  I am unable to connect the Ubuntu guest (both 12.10 and 12.04) to the internet via hyper-V. Here is what I have done so far (with much thanks due to @Kronos's blog post on the topic): Created a switch in the switch manager with connection set to external, selected my wifi card (Intel Centrino Ultimate-N 6300 AGN). If it matters, the Microsoft Filtering Platform is checked under extensions. Added this switch to my Ubuntu guest. I also tried a different wireless card (Aethros 9285) same issue. Connecting through my wired card works just fine (assume that I select that card, and I am wired in of course). Making it a legacy network adapter does not fix the issue. Ubuntu can see this connection, but is unable to connect to it. What follows is what I attempted to do to get Ubuntu to connect: Start and restart the network manager Restart the machine Verify that it could in fact see the adapter (resulted in device not ready a few times) How can I get this to work properly?

  Read the article

• HP DL580 G5 Hyper-V networking problem

  - by mr-perfect

  Hi I have installed the hyper-v role on a DL580 G5 cluster. The host operating system is a server 2008 x64 patched to the maximum. Everything has gone fine, but if I install a guest operating system, actually a windows server 2008 x64 I can't reach the network from it. It send many packets, but don't received any, so I can't ping the external network as well. I have installed the latest drivers to the server and unintalled the network configuration utility from the physical server, but no luck. I added a legacy adapter to the guest binded to the same phisycal adapter on the host machine but it can't help Any idea welcome...

  Read the article

• Gateway on a virtual network interface used by LXC guests

  - by linkdd

  I'm currently having some problems with configuring a gateway for a virtual network interface. Here is what I've done : I created a virtual network interface : # brctl addbr lxc0 # brctl setfd lxc0 0 # ifconfig lxc0 192.168.0.1 promisc up # route add -net default gw 192.168.0.1 lxc0 The output of ifconfig gave me what I wanted : lxc0 Link encap:Ethernet HWaddr 22:4f:e4:40:89:bb inet adr:192.168.0.1 Bcast:192.168.0.255 Masque:255.255.255.0 adr inet6: fe80::88cf:d4ff:fe47:3b6b/64 Scope:Lien UP BROADCAST RUNNING PROMISC MULTICAST MTU:1500 Metric:1 RX packets:623 errors:0 dropped:0 overruns:0 frame:0 TX packets:7412 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 lg file transmission:0 RX bytes:50329 (49.1 KiB) TX bytes:335738 (327.8 KiB) I configured dnsmasq to provide a DNS server (using the default : 192.168.1.1) and a DHCP server. Then, my LXC guest is configured like this : lxc.network.type=veth lxc.network.link=lxc0 lxc.network.flags=up Every thing is working perfectly, my containers have an IP (192.168.0.57 and 192.168.0.98). I can ping the host and the containers from the containers and from the host : (host)# ping -c 3 192.168.0.114 PING 192.168.0.114 (192.168.0.114) 56(84) bytes of data. 64 bytes from 192.168.0.114: icmp_req=1 ttl=64 time=0.044 ms 64 bytes from 192.168.0.114: icmp_req=2 ttl=64 time=0.038 ms 64 bytes from 192.168.0.114: icmp_req=3 ttl=64 time=0.043 ms --- 192.168.0.114 ping statistics --- 3 packets transmitted, 3 received, 0% packet loss, time 1998ms rtt min/avg/max/mdev = 0.038/0.041/0.044/0.007 ms (guest)# ping -c 3 192.168.0.1 PING 192.168.0.1 (192.168.0.1) 56(84) bytes of data. 64 bytes from 192.168.0.1: icmp_req=1 ttl=64 time=0.048 ms 64 bytes from 192.168.0.1: icmp_req=2 ttl=64 time=0.042 ms 64 bytes from 192.168.0.1: icmp_req=3 ttl=64 time=0.042 ms --- 192.168.0.1 ping statistics --- 3 packets transmitted, 3 received, 0% packet loss, time 1999ms rtt min/avg/max/mdev = 0.042/0.044/0.048/0.003 ms Now, it's time to configure the host as a gateway for the network 192.168.0.0/24 : #!/bin/sh # Clear rules iptables -F iptables -t nat -F iptables -t mangle -F iptables -X iptables -A FORWARD -i lxc0 -o eth0 -j ACCEPT iptables -A FORWARD -i eth0 -o lxc0 -m state --state ESTABLISHED,RELATED -j ACCEPT iptables -t nat -A POSTROUTING -o eth0 -j MASQUERADE echo 1 > /proc/sys/net/ipv4/ip_forward The final test failed completely, ping the outside : (guest)# ping -c 3 google.fr PING google.fr (173.194.67.94) 56(84) bytes of data. From 192.168.0.1: icmp_seq=3 Redirect Host(New nexthop: wi-in-f94.1e100.net (173.194.67.94)) From 192.168.0.1 icmp_seq=1 Destination Host Unreachable From 192.168.0.1 icmp_seq=2 Destination Host Unreachable From 192.168.0.1 icmp_seq=3 Destination Host Unreachable --- google.fr ping statistics --- 3 packets transmitted, 0 received, +3 errors, 100% packet loss, time 2017ms Did I missed something ?

  Read the article

• Why do I need to set up Autologon values in registry twice in before it works and can I fix this?

  - by jJack

  Background: As part an automated testing suite I am building, I need to set up Autologon on my virtual machines 'on demand'. By on demand, I mean that I don't want to necessarily pre-configure my VM or any snapshot to have Autologon set up already, for security reasons and also a huge business case. My solution so far: I'm copying a script to the guest machine and then using Sysinternals PsExec to execute it. The script is: reg add "hklm\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon" /f /v DefaultUserName /t REG_SZ /d myusername reg add "hklm\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon" /f /v DefaultPassword /t REG_SZ /d myfakepassword reg add "hklm\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon" /f /v DefaultDomainName /t REG_SZ /d mydomain reg add "hklm\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon" /f /v ForceAutoLogon /t REG_SZ /d 1 reg add "hklm\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon" /f /v AutoAdminLogon /t REG_SZ /d 1 reg add "hklm\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon\AutoLogonChecked" /f /ve /d 1 Note: I don't believe AutoLogonChecked is required for machines post Windows 2000 but I'm doing it just in case for now. Maybe ForceAutoLogon isn't either, not sure yet. The Problem: I see PsExec executes this properly and all the values are in the registry, however when I restart the machine, the user isn't automatically logged on...When I run this a second time then restart the machine, the user is finally logged on. A diff between the registry states shows that the first time I run this, it is missing both the "1" for AutoAdminLogon, and also the DefaultPassword key. The second time I execute it, these values are correctly intact as I intended. So, what is going on here? Is this expected? This post claims in the end that it really all just works (the problem was that a logoff script was setting off the values). Doesn't seem to work for me however. Note this seems unique to Windows 7, does not occur in Windows XP Also note that you don't need PsExec to recreate the issue - just modify the registry yourself EDIT/update: Login interactively and run script (so, not executing it remotely), logging off automatically logs me back in (so, it works) remotely execute the script in guest when I'm interactively logged in, logging off automatically logs me back in (so, it works) remotely execute the script in guest when with non-interactive session if I log in afterwards (so, interactive now) then back off, it logs me back in (so, it then works) EDIT/update 2: This only occurs for Win7x86, Win7x64, Win8x64. This does not occur for Windows XP

  Read the article

• How to disable hiddev96 in linux (or tell it to ignore a specific device)

  - by Miky D

  I'm having problems with a CentOS 5.0 system when using a certain USB device. The problem is that the device advertises itself as a HID device and linux is happy to try to provide support for it: In /ver/log/messages I see a line that reads: hiddev96: USB HID 1.11 Device [KXX USB PRO] on usb-0000:00:1d.0-1 My question comes down to: Is there a way to tell linux to not use hiddev96 for that device in particular? If yes, how? If not, what are my options - can I turn hiddev96 off completely? UPDATE I should probably have been a bit more specific about what is going on. The machine is running Centos 5.0, and on top of it I'm running VMWare workstation with Windows XP - which is where the USB device is actually supposed to operate. All works fine for other USB devices (i.e. VMWare successfully connects the USB device to the guest OS and the OS can use it, but for this particular device VMWare connects it to the guest OS, but the OS can't read/write to it) Every attempt locks up the application that is trying to communicate with the device. I've reason to believe that it is because the device is a HID device and there's some contention between the Linux host and the Windows guest OS in accessing the device. Below is the output from modprobe -l|grep -i hid as requested by @Karolis: # modprobe -l | grep -i hid /lib/modules/2.6.18-53.1.14.el5/kernel/net/bluetooth/hidp/hidp.ko /lib/modules/2.6.18-53.1.14.el5/kernel/drivers/usb/misc/phidgetservo.ko /lib/modules/2.6.18-53.1.14.el5/kernel/drivers/usb/misc/phidgetkit.ko And here is the output of lsmod # lsmod Module Size Used by udf 76997 1 vboxdrv 65696 0 autofs4 24517 2 hidp 23105 2 rfcomm 42457 0 l2cap 29633 10 hidp,rfcomm tun 14657 0 vmnet 49980 16 vmblock 20512 3 vmmon 945236 0 sunrpc 144253 1 cpufreq_ondemand 10573 1 video 19269 0 sbs 18533 0 backlight 10049 0 i2c_ec 9025 1 sbs button 10705 0 battery 13637 0 asus_acpi 19289 0 ac 9157 0 ipv6 251393 27 lp 15849 0 snd_hda_intel 24025 2 snd_hda_codec 202689 1 snd_hda_intel snd_seq_dummy 7877 0 snd_seq_oss 32577 0 nvidia 7824032 31 snd_seq_midi_event 11073 1 snd_seq_oss snd_seq 49713 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event snd_seq_device 11725 3 snd_seq_dummy,snd_seq_oss,snd_seq snd_pcm_oss 42945 0 snd_mixer_oss 19009 1 snd_pcm_oss snd_pcm 72133 3 snd_hda_intel,snd_hda_codec,snd_pcm_oss joydev 13313 0 sg 36061 0 parport_pc 29157 1 snd_timer 24645 2 snd_seq,snd_pcm snd 52421 13 snd_hda_intel,snd_hda_codec,snd_seq_oss,snd_seq,snd_seq_device,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer ndiswrapper 170384 0 parport 37513 2 lp,parport_pc hci_usb 20317 2 ide_cd 40033 1 tg3 104389 0 i2c_i801 11469 0 bluetooth 53925 8 hidp,rfcomm,l2cap,hci_usb soundcore 11553 1 snd cdrom 36705 1 ide_cd serio_raw 10693 0 snd_page_alloc 14281 2 snd_hda_intel,snd_pcm i2c_core 23745 3 i2c_ec,nvidia,i2c_i801 pcspkr 7105 0 dm_snapshot 20709 0 dm_zero 6209 0 dm_mirror 28741 0 dm_mod 58201 8 dm_snapshot,dm_zero,dm_mirror ahci 23621 4 libata 115833 1 ahci sd_mod 24897 5 scsi_mod 132685 3 sg,libata,sd_mod ext3 123337 3 jbd 56553 1 ext3 ehci_hcd 32973 0 ohci_hcd 23261 0 uhci_hcd 25421 0

  Read the article

• Bad I/O scheduler?

  - by user62367

  os: up-to-date Fedora 14. Working as a "normal desktop". It's doing very well, but if i start VirtualBox, and e.g.: install a guest on it, it just "freezez". I mean if there are disk activities on a VirtualBox guest, then the computer becomes unrespondable..even the mouse is laggin for about 50 minutes.. What could be the bottleneck? What could be the problem? If anyone has any tips/howtos to speed it up, please help! It has a normal 2,5" HDD, with 5400 RPM. Does it worth for me if i buy a 2,5" HDD with 7200 RPM? T7200 cpu, 4 GByte RAM, "vm.swappiness = 0". Thank you!

  Read the article

• How to increase video memory in libvirt/KVM gui?

  - by Dejan

  In the 'Virtual Hardware details', it lists the model as 'cirrus' with 9MB of RAM. The RAM field cannot be changed, but how to increate the video RAM? My host OS is RH6 and gust OS is Fedora16. EDIT: From guest OS, when I run xvinfo it displays 'no adaptors present'. I was trying to play a video using gstreamers xvimagesink plugin (XFree86 video output plugin using Xv extension). The problem is that xvimagesink is using hardware acceleration for video performance and hence the error Could not initialize Xv output. I guess I'll have to configure hardware acceleration for the guest.

  Read the article

• Getting FC11 to run under VMware Server, converted from physical machine

  - by Kristian

  I have a FC11 installation that I have converted to a VMware disk image to run om my VMware Server. I converted it with qemu-img, as the VMware Converter software apparently only converts Linux hosts to VMware Infrastructure servers. The disk image boots fine (grub is loaded and boots the kernel) but it seems like the disk is not found by the kernel, and the boot process stalls. Hotplugging USB devices work (the kernel prints debug information) and I'm able to press keys (Ctrl-Alt-Delete for instance). The VMware guest OS is set to RedHat Enterprise Linux 5 (32 bit), and I have tried both the LSI Logic, LSI Logic SAS and VMware Accelerated SCSI SCSI controllers, to no avail. I'm able to boot an installer disk and get into rescue mode and mount the filesystem, so my question is, what do I need to do to the guest kernel / initrd image to make it recognize the virtual disk?

  Read the article

• Cannot connect to Musicbrainz VirtualBox through SSH using Mac

  - by olovholm

  I am trying to connect my mac terminal shell to a VirtualBox running the Musicbrainz server. I have configured the network through a BridgeAdapter and running ifconfig on both the host and the guest show corresponding IP addresses. I can now ping the guest, but I cannot connect through SSH. The verbose output from the SSH client on my mac states: (olaenv)hf-79-202:Python oclovhol$ ssh -vv [email protected] OpenSSH_5.6p1, OpenSSL 0.9.8r 8 Feb 2011 debug1: Reading configuration data /etc/ssh_config debug1: Applying options for * debug2: ssh_connect: needpriv 0 debug1: Connecting to 127.0.0.1 [127.0.0.1] port 22. debug1: Connection established. debug1: identity file /Users/oclovhol/.ssh/id_rsa type -1 debug1: identity file /Users/oclovhol/.ssh/id_rsa-cert type -1 debug1: identity file /Users/oclovhol/.ssh/id_dsa type -1 debug1: identity file /Users/oclovhol/.ssh/id_dsa-cert type -1 ssh_exchange_identification: Connection closed by remote host

  Read the article

• Can't create a valid symlink under VMWare HGFS

  - by Alexander Gladysh

  Host: OS X 10.6.5 VMWare Fusion: 3.1.2 Guest: Ubuntu x86 10.10 $ uname -a Linux ubuntu 2.6.35-24-generic #42-Ubuntu SMP Thu Dec 2 01:41:57 UTC 2010 i686 GNU/Linux I can not create a symlink, readable from the Guest OS anywhere in the directory, mounted with hgfs: /mnt/hgfs/projects/tmp$ touch aaa /mnt/hgfs/projects/tmp$ ln -s aaa bbb /mnt/hgfs/projects/tmp$ less bbb bbb: No such file or directory /mnt/hgfs/projects/tmp$ ls -la total 6 drwxr-xr-x 1 501 users 136 2010-12-28 18:12 . drwxr-xr-x 1 501 users 8602 2010-12-28 18:12 .. -rw-r--r-- 1 501 users 0 2010-12-28 18:12 aaa lrwxr-xr-x 1 501 users 3 2010-12-28 18:12 bbb - aaa /mnt/hgfs/projects/tmp$ readlink bbb aaa The same symlink is perfectly accessible in OS X host. Is there a workaround for this?

  Read the article

• How to connect XP mode VM to the host so as to simulate LAN Activities?

  - by rsjethani

  First of all my PC config: Host:Windows 7(32-bit) Guest: Windows XP SP3 as XP Mode. Integration Features Disabled(I don't think it has any thing to do with networking). Network Connections on Host : 1.Local Area Connection(Realtek...) - unplugged(as no other PC is connected). 2.Nokia 2730 classic USB Modem - I use this connect to the internet. Now,How can I connect the guest to the host as if they were on a LAN. Please give specific steps as I am using Windows XP Mode/Virtual machine for the first time.

  Read the article

• Encrypted drive installation possible?

  - by theAdmiral

  Is VMware capable of installing a (host)Linux / (guest) WinVista configuration on an encrypted /home drive in Linux?

  Read the article

• VMWare-Tools Installation fails on Ubuntu 11.04

  - by Ajay

  I am trying to install VMwareTools-8.4.6-385536.tar.gz (VMWare Tools) on the following operating system: Ubuntu 11.04 - Linux ubuntu 2.6.38-8-generic #42-Ubuntu SMP Mon Apr 11 03:31:50 UTC 2011 i686 i686 i386 GNU/Linux I am using VMPlayer version 3.1.4 - build 385536 ==================================================================== After starting the installation i am getting the following errors: What is the directory that contains the init scripts? [/etc/init.d] Error opening No such file or directory ================================================ Distribution provided drivers for Xorg X server are used. Skipping X configuration because X drivers are not included. Creating a new initrd boot image for the kernel. update-initramfs: Generating /boot/initrd.img-2.6.38-8-generic Starting VMware Tools services in the virtual machine: Switching to guest configuration: done Blocking file system: done Guest operating system daemon: failed Virtual Printing daemon: done Unable to start services for VMware Tools Can somebody help in this?

  Read the article

• Best practice for system clock sync on KVM host

  - by Tauren

  I have an Ubuntu 9.10 server running as a KVM host with ntpd installed on it. The host system has the correct system time. At the moment I only have a single KVM guest, also Ubuntu 9.10 server. I do not have ntpd installed on it, and I just discovered the clock is about 6 minutes slow. It wasn't that way when it was installed about a month ago. I thought that I only needed to keep the host clock synchronized and that the guests used the host clock. But maybe that is a memory from using OpenVZ. I believe the reasoning was related to only the host could modify the physical system clock. Is running ntpd on both the host and all the guests the correct thing to do? Or is there something else that is preferred? How should I keep the guest clocks in sync?

  Read the article

< Previous Page | 34 35 36 37 38 39 40 41 42 43 44 45  | Next Page >