Search Results

Search found 1232 results on 50 pages for 'guid'.

Page 38/50 | < Previous Page | 34 35 36 37 38 39 40 41 42 43 44 45  | Next Page >

• Failed to unmount partitions

  - by msknapp

  I'm trying to install ubuntu from a pen drive. I have windows 7 installed already and want to keep that installation. I have a 3TB drive that has one 2TB partition on it, so the last 1TB is completely unused, which is where I want to install ubuntu. I started ubuntu in "try ubuntu" mode and then opened gparted, and then deleted the unused partition for the last third of my drive, then tried to install ubuntu. During the install, it asked me if I wanted to unmount the drives I already have The installer has detected that the following disks have mounted partitions: /dev/sda, /dev/sdb Do you want the installer to try to unmount the partitions on these disks before continuing? If you leave them mounted, you will not be able to create, delete, or resize partitions on these disks, but you may be able to install to existing partitions there. No, Yes I said no because I don't want to lose my windows 7 installation, nor any of that data. I wonder, if I had said yes above, would I have lost all the data on those drives? Anyways, I hit no and continued. I chose to install ubuntu alongside windows 7, and hit continue. A few minutes passed when this popup appeared: Failed to unmount partitions The installer needs to commit changes to partition tables, but cannot do so because the partitions on the following mount points could not be unmounted: /media/ubuntu/Three\ Terabyte Drive Terabyte\ DriveDrive Please close any applications using these mount points. Would you like the installer to try to unmount these partitions again? Go Back, Continue Why is this not working? What am I supposed to do? ========== Update: I went ahead and said yes, it can unmount those partitions. It finished installing Ubuntu, but now when i start my machine it just takes me to the grub rescue prompt. Seems like it broke something. What can I do now? =============== Results of fdisk -l: Disk /dev/sda: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00027e14 Device Boot Start End Blocks Id System /dev/sda1 * 2048 206847 102400 7 HPFS/NTFS/exFAT /dev/sda2 206848 976771071 488282112 7 HPFS/NTFS/exFAT WARNING: GPT (GUID Partition Table) detected on '/dev/sdb'! The util fdisk doesn't support GPT. Use GNU Parted. Disk /dev/sdb: 3000.6 GB, 3000592982016 bytes 255 heads, 63 sectors/track, 364801 cylinders, total 5860533168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0x00000000 Device Boot Start End Blocks Id System /dev/sdb1 1 4294967295 2147483647+ ee GPT Partition 1 does not start on physical sector boundary. Disk /dev/sdc: 16.0 GB, 16008609792 bytes 255 heads, 63 sectors/track, 1946 cylinders, total 31266816 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Device Boot Start End Blocks Id System /dev/sdc1 * 32 31266815 15633392 c W95 FAT32 (LBA) Disk /dev/sdd: 999.5 GB, 999501594624 bytes 255 heads, 63 sectors/track, 121515 cylinders, total 1952151552 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0002ae3f Device Boot Start End Blocks Id System /dev/sdd1 2048 1952151551 976074752 7 HPFS/NTFS/exFAT

  Read the article

• ABCpdf7 Not Rendering Images using AddImageUrl

  - by ddango

  Fairly exotic it seems to me. We recently upgraded/migrated from Windows Server 2003 to 2008, and now it seems that images cannot be rendered when using Doc.AddImageUrl(). (when the pdf is saved, the images appear at the correct dimensions, but the IE8 missing image x shows up). If I understand correctly, ABCpdf uses IE rendering internally for this sort of thing. We thought it might be a permission issue, but we've check IE ESC and that seems to be configured as they suggest. Has anyone else run into a similar problem? Perhaps a code configuration is needed? Not the entire snippet, but the ABCpdf7 stuff: using (Doc doc = new Doc()) { doc.HtmlOptions.PageCacheEnabled = false; doc.HtmlOptions.UseNoCache = true; doc.HtmlOptions.PageCacheClear(); doc.HtmlOptions.PageCachePurge(); doc.HtmlOptions.UseResync = true; doc.HtmlOptions.ImageQuality = 25; int pageID = doc.AddImageUrl(url + "&guid=" + url.GetHashCode()); while (true) { if (!doc.Chainable(pageID)) break; doc.Page = doc.AddPage(); pageID = doc.AddImageToChain(pageID); } // file saving etc. }

  Read the article

• SPException: Catastrophic failure (Exception from HRESULT: 0x8000FFF (E_UNEXPECTED) in Sharepoint

  - by BeraCim

  I've been trying to programmatically copy custom content type and its custom columns from one web to another for some time now, and I always get different errors or exceptions every time. After yet more tries, I received more strange and cryptic exception from Sharepoint after clicking onto a newly copied custom column in a custom content type. I checked the logs, and this is what I got: Unknown SPRequest erorr occurred. More information: 0x80070002 Unable to locate the xml-definition for FieldName with FieldId 'guid without braces', exception: Microsoft.SharePoint.SPException: Catastrophic failure (Exception from HRESULT: 0x8000FFF (E_UNEXPECTED)) ---> System.Runtime.InteropServices.COMException... ... at Microsoft.SharePoint.Library.SPRequestInternalClass.GetGlobalContentTypeXml(String bstrUrl, Int32 type, UInt 32 lcid, Object varIdBytes... Failed to find the content type schema for ct-1033-0x1000blahblahblahcontenttypeId while caching feature data. Unknown SPRequest error occurred. More informationL 0x8000ffff Unable to locate the xml-definition for CType with SPContentTypeId '0x0100MorecontenttypeId', exception: Microsoft.SharePoint.SPException: Catastrophic failure(Exception from HRESULT: 0x8000FFFF (E_UNEXPECTED)) ---> System.Runtime.InteropServices.COMException (0x8000FFFF): Catastrophic failure... ... at Microsoft.SharePoint.Library.SPRequestInternalClass.GetGlobalContentTypeXml(String bstrUrl, Int32 type, UInt 32 lcid, Object varIdBytes... It failed to find quite a few content type schema. I'm confused with what Sharepoint is trying to do here, and why a simple process of copying a custom content type from one web to another just wouldn't work in contrast to the information found on the web e.g. this. Appreciate any help to get over this problem. Thanks.

  Read the article

• Silverlight 4 Overriding the DataForm Autogenerate to insert Combo Boxes bound to Converters.

  - by kmacmahon

  I've been working towards a solution for some time and could use a little help. I know I've seen an example of this before, but tonight I cannot find anything close to what I need. I have a service that provides me all my DropDownLists, either from Cache or from the DomainService. They are presented as IEnumerable, and are requested from the a repository with GetLookup(LookupId). I have created a custom attribute that I have decorated my MetaDataClass that looks something like this: [Lookup(Lookup.Products)] public Guid ProductId I have created a custom Data Form that is set to AutoGenerateFields and I am intercepting the autogenerate fields. I am checking for my CustomAttribute and that works. Given this code in my CustomDataForm (standard comments removed for brevity), what is the next step to override the field generation and place a bound combobox in its place? public class CustomDataForm : DataForm { private Dictionary<string, DataField> fields = new Dictionary<string, DataField>(); public Dictionary<string, DataField> Fields { get { return this.fields; } } protected override void OnAutoGeneratingField(DataFormAutoGeneratingFieldEventArgs e) { PropertyInfo propertyInfo = this.CurrentItem.GetType().GetProperty(e.PropertyName); foreach (Attribute attribute in propertyInfo.GetCustomAttributes(true)) { LookupFieldAttribute lookupFieldAttribute = attribute as LookupFieldAttribute; if (lookupFieldAttribute != null) { // Create a combo box. // Bind it to my Lookup IEnumerable // Set the selected item to my Field's Value // Set the binding two way } } this.fields[e.PropertyName] = e.Field; base.OnAutoGeneratingField(e); } } Any cited working examples for SL4/VS2010 would be appreciated. Thanks

  Read the article

• Telerik ASP.NET AJAX - Ajax Update Label with dynamic created Docks

  - by csharpnoob

  Hi, i try to Update a simple Label on Close Event of dynamic created RadDock. Works fine so far, Label gets the correct values but doesnt updates it. RadDock dock = new RadDock(); dock.DockMode = DockMode.Docked; dock.UniqueName = Guid.NewGuid().ToString(); dock.ID = string.Format("RadDock{0}", dock.UniqueName); dock.Title = slide.slideName; dock.Text = string.Format("Added at {0}", DateTime.Now); dock.Width = Unit.Pixel(300); dock.AutoPostBack = true; dock.CommandsAutoPostBack = true; dock.Command += new DockCommandEventHandler(dock_Command); ... void dock_Command(object sender, DockCommandEventArgs e) { Status.Text = "Removed " + ((RadDock)sender).Title + " " + ((RadDock)sender).Text; } I tried to do this: RadAjaxManager1.AjaxSettings.AddAjaxSetting(dock, Status, null); while creating the docks, but on runtime i get a NullReference Excepetion. On a Button registered with the RadAjaxManager it works to show the value assigned by dock_command. protected void Button1_Click(object sender, EventArgs e) { Status.Text = Status.Text; } UPDATE: The RadAjaxManager was created with integrated Wizzard of VS2008. Can't select the Docks, because the are generated while runtime. On Backend its included in AutoCompletion, so the NullReference has nothing to do with the AjaxManager itself. Like i said, works fine with the Button. <telerik:RadAjaxManager ID="RadAjaxManager1"> <telerik:AjaxSetting AjaxControlID="Button1"> <UpdatedControls> <telerik:AjaxUpdatedControl ControlID="Label1"></telerik:AjaxUpdatedControl> </UpdatedControls> </telerik:AjaxSetting>

  Read the article

• Sitecore not resolving rich text editor URLS in page renders

  - by adam

  Hi We're having issues inserting links into rich text in Sitecore 6.1.0. When a link to a sitecore item is inserted, it is outputted as: http://domain/~/link.aspx?_id=8A035DC067A64E2CBBE2662F6DB53BC5&_z=z Rather than the actual resolved url: http://domain/path/to/page.aspx This article confirms that this should be resolved in the render pipeline: in Sitecore 6 it inserts a specially formatted link that contains the Guid of the item you want to link to, then when the item is rendered the special link is replaced with the actual link to the item The pipeline has the method ShortenLinks added in web.config <convertToRuntimeHtml> <processor type="Sitecore.Pipelines.ConvertToRuntimeHtml.PrepareHtml, Sitecore.Kernel"/> <processor type="Sitecore.Pipelines.ConvertToRuntimeHtml.ShortenLinks, Sitecore.Kernel"/> <processor type="Sitecore.Pipelines.ConvertToRuntimeHtml.SetImageSizes, Sitecore.Kernel"/> <processor type="Sitecore.Pipelines.ConvertToRuntimeHtml.ConvertWebControls, Sitecore.Kernel"/> <processor type="Sitecore.Pipelines.ConvertToRuntimeHtml.FixBullets, Sitecore.Kernel"/> <processor type="Sitecore.Pipelines.ConvertToRuntimeHtml.FinalizeHtml, Sitecore.Kernel"/> </convertToRuntimeHtml> So I really can't see why links are still rendering in ID format rather than as full SEO-tastic urls. Anyone got any clues? Thanks, Adam

  Read the article

• Can't step into stored procedure on remote SQL Server 2008

  - by abatishchev

  I have a domain installed on virtual Windows Server 2008 x64. SQL Server 2008 Express x64 is running in Windows Server 2008 x64 and client on Windows 7 RTM x86. Both are into the domain. I'm starting both Visual Studio 2008 and SQL Server Management Studio 2008 under domain admin user. This account is a member of group sysadmin on SQL Server. Server has firewall exceptions for both TCP and UDP on ports 135-139 and 1433-1434. Visual Studio 2008 Remote debugger services is started on server and Domain Admins group is allowed to debug, When I'm starting debugging of a query in SMS I'm getting this error: Failed to start debugger Error HRESULT E_FAIL has been returned from a call to a COM component. (mscorlib) Program Location: at System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal(Int32 errorCode, IntPtr errorInfo) at Microsoft.SqlServer.Management.UI.VSIntegration.DebugSession.DebugCallbacks.OnSqlInitializeDebuggingEvent(ISqlInitializeDebuggingEvent sqlInitializeDebuggingEvent) at Microsoft.SqlServer.Management.UI.VSIntegration.DebugSession.DebugCallbacks.Microsoft.VisualStudio.Debugger.Interop.IDebugEventCallback2.Event(IDebugEngine2 debugEngine, IDebugProcess2 debugProcess, IDebugProgram2 debugProgram, IDebugThread2 debugThread, IDebugEvent2 debugEvent, Guid& riidEvent, UInt32 attribute) and Unable to access the SQL Server debugging interface. The Visual Studio debugger cannot connect to the remote computer. A firewall may be preventing communication via DCOM to the remote computer. Please see Help for assistance. and Unable to start program MSSSQL://server.mydomain.local/master/sys/=0 And when stepping-in into a stored procedure using VS I'm getting the first one and this: Exception from HRESULT: 0x89710016 What have I do?

  Read the article

• Nhibernate exception - No persister for

  - by Muhammad Akhtar

  I am getting exception when calling Stored Procedure using Nhibernate and here is the exception No persister for: ReleaseDAL.ProgressBars, ReleaseDAL, Version=1.0.0.0, Culture=neutral, PublicKeyToken=null here is class file public class ProgressBars { public ProgressBars() { } private Int32 _Tot; private Int32 _subtot; public virtual Int32 Tot {get { return _Tot; } set { _Tot = value; } } public virtual Int32 subtot { get { return _subtot; } set { _subtot = value; }} } here is my mapping file <hibernate-mapping xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns="urn:nhibernate-mapping-2.2" assembly="ReleaseDAL" namespace="ReleaseDAL" > <sql-query name="ps_getProgressBarData1" > <return alias="ProgressBars" class="ProgressBars"> <return-property name="Tot" column="Tot"/> <return-property name="subtot" column="subtot"/> </return> exec ps_getProgressBarData1 </sql-query> </hibernate-mapping> Calling Code public List<ProgressBars> getProgressBarData1(Guid ReleaseId) { ISession session = NHibernateHelper.GetCurrentSession(); List< ProgressBars> progressBar = (List<ProgressBars>)session.GetNamedQuery("ps_getProgressBarData1").List<ProgressBars>(); NHibernateHelper.CloseSession(); return progressBar; } I am introuble due to this exception, I did lot Google but no success, Please give idea to solve this problem. Thanks.........

  Read the article

• Telerik RADGrid - linq and updating

  - by Dave

  Hi Telerik's RADGrid, basing on their example on http://demos.telerik.com/aspnet-ajax/grid/examples/dataediting/programaticlinqupdates/defaultcs.aspx Problem: I can insert and delete, however updating doesn't work. No error trapped. Data just doesn't change. From the code below it looks like Telerik Grid is doing some kung-fu behind the scenes to wire things up. I can't see the db receiving any update statements. Question: anything obvious I'm missing? protected void RadGrid1_UpdateCommand(object source, GridCommandEventArgs e) { var editableItem = ((GridEditableItem) e.Item); var raceId = (Guid) editableItem.GetDataKeyValue("RaceID"); //retrive entity form the Db var race = DbContext.races.Where(n => n.raceid == raceId).FirstOrDefault(); if (race != null) { //update entity's state editableItem.UpdateValues(race); try { //submit chanages to Db DbContext.SubmitChanges(); } catch (Exception f) { ShowErrorMessage(f); } } } Think I may have to go back to their example.. get their db.. and attack from that point of view. Cheers!

  Read the article

• Impersonation in ASP.NET MVC

  - by eibrahim

  I have an Action that needs to read a file from a secure location, so I have to use impersonation to read the file. This code WORKS: [AcceptVerbs(HttpVerbs.Get)] public ActionResult DirectDownload(Guid id) { if (Impersonator.ImpersonateValidUser()) { try { var path = "path to file"; if (!System.IO.File.Exists(path)) { return View("filenotfound"); } var bytes = System.IO.File.ReadAllBytes(path); return File(bytes, "application/octet-stream", "FileName"); } catch (Exception e) { Log.Exception(e); }finally { Impersonator.UndoImpersonation(); } } return View("filenotfound"); } The only problem with the above code is that I have to read the entire file into memory and I am going to be dealing with VERY large files, so this is not a good solution. But if I replace these 2 lines: var bytes = System.IO.File.ReadAllBytes(path); return File(bytes, "application/octet-stream", "FileName"); with this: return File(path, "application/octet-stream", "FileName"); It does NOT work and I get the error message: Access to the path 'c:\projects\uploads\1\aa2bcbe7-ea99-499d-add8-c1fdac561b0e\Untitled 2.csv' is denied. I guess using the File results with a path, tries to open the file at a later time in the request pipeline when I have already "undone" the impersonation. Remember, the impersonation code works because I can read the file in the bytes array. What I want to do though is stream the file to the client. Any idea how I can work around this? Thanks in advance.

  Read the article

• Using SharePoint label to display document version in Word 2007 doesn't work when moved to another l

  - by ITManagerWhoCodes

  I am surfacing the Document Library version of a Word 2007 document by creating a Label ({version}) within the content type of the Document Library and adding it as a Quick-part Label in the Word 2007 document. This works great. The latest version always shows up when I open the Word document. I also added this Version quick-part field to the footer of the Word document and then added this document as a document template to my content type, "ContentTypeMain". Now, I can go to my Document Library and I can create a New instance of "ContentTypeMain" with the Version field automatically there. This works great as well. However, if I create another Document Library and add the same Content Type, "ContentTypeMain" to it, the value of the Version quick-part doesn't update or refresh. The only way is to add another copy of the Label quick-part. It seems like the Quick-Part Label that maps to the Document Library Version is unique to the Document Library. My application dynamically creates subsites using site definitions and list templates. Thus the document library in each of the subsites are all being created from the same List Template. I inspected the XML files under the hood of the Word Document and it does look like there is a GUID attached to the Quick-Part Version field.

  Read the article

• Methods for deep cloning objects in C#

  - by Anry

  I have a class: public class Order : BaseEPharmObject { public Order() { } public virtual Guid Id { get; set; } public virtual DateTime Created { get; set; } public virtual DateTime? Closed { get; set; } public virtual OrderResult OrderResult { get; set; } public virtual decimal Balance { get; set; } public virtual Customer Customer { get; set; } public virtual Shift Shift { get; set; } public virtual Order LinkedOrder { get; set; } public virtual User CreatedBy { get; set; } public virtual decimal TotalPayable { get; set; } public virtual IList<Transaction> Transactions { get; set; } public virtual IList<Payment> Payments { get; set; } } I need to clone objects of class Order. How to implement a deep copy right in the base class?

  Read the article

• WIX Merge Module : Trying to use $(var.Project.TargetFileName)

  - by Stephen Bailey

  I have created a simple Wix 3 Merge Module in VS 2005 ( .wxs ) <?xml version="1.0" encoding="UTF-8"?> <Wix xmlns="http://schemas.microsoft.com/wix/2006/wi"> <Module Id="TestMergeModule" Language="1033" Version="1.0.0.0"> <Package Id="ef2a568e-a8db-4213-a211-9261c26031aa" Manufacturer="Me" InstallerVersion="200" /> <Directory Id="TARGETDIR" Name="SourceDir"> <Directory Id="MergeRedirectFolder"> <Component Id="Test_ModuleComponent" Guid="{1081C5BC-106E-4b89-B14F-FFA71B0987E1}"> <File Id="Test" Name="$(var.Project.TargetFileName)" Source="$(var.Project.TargetPath)" DiskId="1" /> </Component> </Directory> </Directory> </Module> </Wix> And I have added the project "Project" as a reference to this Merge Module, however I continue to get this error Error 7 Undefined preprocessor variable '$(var.Project.TargetFileName)'. Any suggestions, I am sure I am just missing the obvious here.

  Read the article

• HRESULT of 0x806D0005 from Microsoft's Dia2Lib

  - by Aeolien

  I'm trying to read a PDB file into a C# application. When I call loadDataFromPdb or loadAndValidateDataFromPdb with a file that I know exists, I get an HRESULT of 0x806D0005. Unfortunately, I have no idea what that means. I have the list of possible results [here](http://msdn.microsoft.com/en-us/library/2008hf0e(v=VS.80).aspx) but I'm afraid I can't conclusively determine the problem. Does anybody know what I'm doing wrong? Or at least a method of checking what that corresponds to? Exception: System.Runtime.InteropServices.COMException (0x806D0005): Exception from HRESULT: 0x806D0005 at Dia2Lib.DiaSourceClass.loadDataFromPdb(String pdbPath) Code Sample: public static void LoadSymbolsForModule(uint baseAddress, uint size, uint timeStamp, DM_PDB_SIGNATURE signature) { IDiaDataSource m_source = new DiaSourceClass(); //m_source.loadAndValidateDataFromPdb(signature.path, ref signature.guid, 0, signature.age); m_source.loadDataFromPdb(signature.path); IDiaSession m_session; m_source.openSession(out m_session); m_session.loadAddress = baseAddress; modules.Add(new Module(baseAddress, size, m_session)); } Thanks in advance, guys. This problem has been killing me all day.

  Read the article

• Has anyone installed NServiceBus onto a Microsoft clustered server?

  - by David

  I am trying to install NServiceBus onto a clustered win2k3 host. The configuration utility provided (runner.exe) throw some errors that I did not catch, and it now runs correctly. When running NServiceBus.Host.exe i am get this error repeatedly: System.Transactions.TransactionAbortedException: The transaction has aborted. --- System.Transactions.TransactionManagerCommunicationException: Communication with the underlying transaction manager has failed. --- System.Runtime.InteropServices.COMException (0x8004D01B): The Transaction Manager is not available. (Exception from HRESULT: 0x8004D01B) at System.Transactions.Oletx.IDtcProxyShimFactory.ConnectToProxy(String nodeName, Guid resourceManagerIdentifier, IntPtr managedIdentifier, Boolean& nodeNameMatches, UInt32& whereaboutsSize, CoTaskMemHandle& whereaboutsBuffer, IResourceManagerShim& resourceManagerShim) at System.Transactions.Oletx.DtcTransactionManager.Initialize() --- End of inner exception stack trace --- at System.Transactions.Oletx.OletxTransactionManager.ProxyException(COMException comException) at System.Transactions.Oletx.DtcTransactionManager.Initialize() at System.Transactions.Oletx.DtcTransactionManager.get_ProxyShimFactory() at System.Transactions.Oletx.OletxTransactionManager.CreateTransaction(TransactionOptions properties) at System.Transactions.TransactionStatePromoted.EnterState(InternalTransaction tx) --- End of inner exception stack trace --- at System.Transactions.TransactionStateAborted.CheckForFinishedTransaction(InternalTransaction tx) at System.Transactions.EnlistableStates.Promote(InternalTransaction tx) at System.Transactions.Transaction.Promote() at System.Transactions.TransactionInterop.ConvertToOletxTransaction(Transaction transaction) at System.Transactions.TransactionInterop.GetDtcTransaction(Transaction transaction) at System.Messaging.MessageQueue.StaleSafeReceiveMessage(UInt32 timeout, Int32 action, MQPROPS properties, NativeOverlapped* overlapped, ReceiveCallback receiveCallback, CursorHandle cursorHandle, IntPtr transaction) at System.Messaging.MessageQueue.ReceiveCurrent(TimeSpan timeout, Int32 action, CursorHandle cursor, MessagePropertyFilter filter, MessageQueueTransaction internalTransaction, MessageQueueTransactionType transactionType) at System.Messaging.MessageQueue.Receive(TimeSpan timeout, MessageQueueTransactionType transactionType) at NServiceBus.Unicast.Transport.Msmq.MsmqTransport.ReceiveMessageFromQueueAfterPeekWasSuccessful() in d:\BuildAgent-02\work\672d81652eaca4e1\src\impl\unicast\NServiceBus.Unicast.Msmq\MsmqTransport.cs:line 551 Has anyone successfully put NServiceBus onto a clustered server, if so, how did you get it working?

  Read the article

• How to stream partial content with ASP.NET MVC FileStreamResult

  - by o_o

  We're using a FileStreamResult to provide video data to a Silverlight MediaElement based video player: public ActionResult Preview(Guid id) { return new FileStreamResult( Services.AssetStore.GetStream(id, ContentType.Preview), "application/octet-stream"); } Unfortunately, the Silverlight video player downloads the entire video file before it starts playing. This behavior is expected as our Preview Action does not support downloading partial content. (side note: if the file is hosted in an IIS virtual directory we can start playback at any location in the video while it is still downloading. however for security and auditing reasons we can't provide a direct download link. so this is not an option.) How can we improve the Controller Action to support partial HTTP content? I assume we first have to inform the client that we support it (adding an "Accept-Ranges:bytes" header to a HEAD request), then we have to evaluate the HTTP "Range" header and stream the requested file range with a response code of 206. Will that work with ASP.NET MVC hosted on IIS6? Is there already some code available? Also see: http://en.wikipedia.org/wiki/List_of_HTTP_headers http://blogs.msdn.com/anilkumargupta/archive/2009/04/29/downloadprogress-downloadprogressoffset-and-bufferprogress-of-the-mediaelement.aspx http://benramsey.com/archives/206-partial-content-and-range-requests/

  Read the article

• Cannot create list in SharePoint 2010 using Client Object Model

  - by Boris

  I am trying to utilize SharePoint 2010 Client Object Model to create a List based on a custom template. Here's my code: public void MakeList(string title, string listTemplateGUID, int localeIdentifier) { string message; string listUrl; List newList; Guid template; ListCreationInformation listInfo; Microsoft.SharePoint.Client.ListCollection lists; try { listUrl = title.Replace(spaceChar, string.Empty); template = GetListTemplate((uint)localeIdentifier, listTemplateGUID); listInfo = new ListCreationInformation(); listInfo.Url = listUrl; listInfo.Title = title; listInfo.Description = string.Empty; listInfo.TemplateFeatureId = template; listInfo.QuickLaunchOption = QuickLaunchOptions.On; clientContext.Load(site); clientContext.ExecuteQuery(); lists = site.Lists; clientContext.Load(lists); clientContext.ExecuteQuery(); newList = lists.Add(listInfo); clientContext.ExecuteQuery(); } catch (ServerException ex) { //... } } Now, this particular part, newList = lists.Add(listInfo); clientContext.ExecuteQuery(); the one that is supposed to create the actual list, throws an exception: Message: Cannot complete this action. Please try again. ServerErrorCode: 2130239231 ServerErrorTypeName: Microsoft.SharePoint.SPException Could anyone please help me realize what am I doing wrong? Thanks.

  Read the article

• "One of the request inputs not valid" error when attempting to update Azure Table Storage

  - by sako73

  I am attempting to update an entry in Azure Table Storage. The function is: public void SaveBug(DaBug bug) { bug.PartitionKey = "bugs"; bug.Timestamp = DateTime.UtcNow; if (bug.RowKey == null || bug.RowKey == string.Empty) { bug.RowKey = Guid.NewGuid().ToString(); _context.AddObject(c_TableName, bug); } else { _context.AttachTo(c_TableName, bug); _context.UpdateObject(bug); } _context.SaveChanges(); } If it is a new entry (the "bug.RowKey == null" path), then it works fine. If it is an update to an existing entity, then the "AttachTo", and the "UpdateObject" calls work, but when it gets to "SaveChanges", it throws the "One of the request inputs not valid" exception. The class that is being stored is: [DataContract] [DataServiceKey("RowKey")] public class DaBug { [DataMember] public bool IsOpen { get; set; } [DataMember] public string Title { get; set; } [DataMember] public string Description { get; set; } [DataMember] public string SubmittedBy { get; set; } [DataMember] public DateTime SubmittedDate { get; set; } [DataMember] public string RowKey { get; set; } public DateTime Timestamp { get; set; } public string PartitionKey { get; set; } } Does anyone know what the problem is? Thanks for any help.

  Read the article

• Friend Assemblies in C#

  - by Tim Long

  I'm trying to create some 'friend assemblies' using the [InternalsVisibleTo()] attribute, but I can't seem to get it working. I've followed Microsoft's instructions for creating signed friend assemblies and I can't see where I'm going wrong. So I'll detail my steps here and hopefully someone can spot my deliberate mistake...? Create a strong name key and extract the public key, thus: sn -k StrongNameKey sn -p public.pk sn -tp public.pk Add the strong name key to each project and enable signing. Create a project called Internals and a class with an internal property: namespace Internals { internal class ClassWithInternals { internal string Message { get; set; } public ClassWithInternals(string m) { Message = m; } } } Create another project called TestInternalsVisibleTo: namespace TestInternalsVisibleTo { static class Program { /// <summary> /// The main entry point for the application. /// </summary> [STAThread] static void Main() { var c = new Internals.ClassWithInternals("Test"); Console.WriteLine(c.Message); } } } Edit the AssemblyInfo.cs file for the Internals project, and add teh necessary attribute: [assembly: AssemblyTitle("AssemblyWithInternals")] [assembly: AssemblyDescription("")] [assembly: AssemblyConfiguration("")] [assembly: AssemblyCompany("Microsoft")] [assembly: AssemblyProduct("Internals")] [assembly: AssemblyCopyright("Copyright © Microsoft 2010")] [assembly: AssemblyTrademark("")] [assembly: AssemblyCulture("")] [assembly: ComVisible(false)] [assembly: Guid("41c590dc-f555-48bc-8a94-10c0e7adfd9b")] [assembly: AssemblyVersion("1.0.0.0")] [assembly: AssemblyFileVersion("1.0.0.0")] [assembly: InternalsVisibleTo("TestInternalsVisibleTo PublicKey=002400000480000094000000060200000024000052534131000400000100010087953126637ab27cb375fa917c35b23502c2994bb860cc2582d39912b73740d6b56912c169e4a702bedb471a859a33acbc8b79e1f103667e5075ad17dffda58988ceaf764613bd56fc8f909f43a1b177172bc4143c96cf987274873626abb650550977dcad1bb9bfa255056bb8d0a2ec5d35d6f8cb0a6065ec0639550c2334b9")] And finally... build! I get the following errors: error CS0122: 'Internals.ClassWithInternals' is inaccessible due to its protection level error CS1729: 'Internals.ClassWithInternals' does not contain a constructor that takes 1 arguments error CS1061: 'Internals.ClassWithInternals' does not contain a definition for 'Message' and no extension method 'Message' accepting a first argument of type 'Internals.ClassWithInternals' could be found (are you missing a using directive or an assembly reference?) Basically, it's as if I had not used the InternalsVisibleTo attrbute. Now, I'm not going to fall into the trap of blaming the tools, so what's up here? Anyone?

  Read the article

• Change Edit Control Block (ECB) Link URL in SharePoint

  - by dirq

  Is there a way to dynamically change the hyperlink associated with an ECB menu in WSS 3.0? For instance, I have a list with 2 fields. One field is hidden and is a link, the other is the title field which has the ECB menu. The title field currently links to the item's view page - but we want it to link to the link-field's url. Is that possible? UPDATE - 5/29/09 9AM I have this so far. See this TechNet post. <script type="text/javascript"> var url = 'GoTo.aspx?ListTitle='+ctx.ListTitle; url += '&ListName='+ctx.listName; url += '&ListTemplate='+ctx.listTemplate; url += '&listBaseType='+ctx.listBaseType; url += '&view='+ctx.view; url += '&'; var a = document.getElementsByTagName('a'); for(i=0;i<=a.length -1;i++) { a[i].href=a[i].href.replace('DispForm.aspx?',url); } </script> This gives me a link like so (formatted so it's easier to see): GoTo.aspx ?ListTitle=MyList &ListName={082BB11C-1941-4906-AAE9-5F2EBFBF052B} &ListTemplate=100 &listBaseType=0 &view={9ABE2B07-2B47-4390-9969-258F00E0812C} &ID=1 My issue now is that the row in the grid gives each item the ID property above but if I change the view or do any filtering you can see that the ID is really just the row number. Can I get the actual item's GUID here? If I can get the item's ID I can send it with the list ID to an application page that will get the right URL from field in the list and forward the user on to the right site.

  Read the article

• How to use an out-of-process COM server without its tlb file

  - by Dbger

  It is about Window COM component. Server.exe: an 32bit out-of-process COM server CLSID_Application: The GUID of a COM object in Server.exe Client.exe: a 64bit client application which use Server.exe in a registry-free way. As we know, an exe can't be used as a registry-free COM component, to mimic such behavior, I start the Server.exe process myself by providing the exact path: CreateProcess("Server.exe") IClassFactory* pFactory = CoGetClassObject(CLSID_Application) pFactory-CreateInstance(ppAppObject); It works if I have the Server.tlb registred, but after unregister Server.tlb, it just failed to create the ppAppObject, even though I embed manifest into both Server.exe and Client.exe: <assembly xmlns="urn:schemas-microsoft-com:asm.v1" manifestVersion="1.0"> <file name="Server.tlb"> <typelib tlbid="{DAC4A4C9-F84C-4F05-A7DC-E152869499F5}" version="1.0" helpdir=""></typelib> </file> <comInterfaceExternalProxyStub name="IApplication" iid="{D74208EA-71C2-471D-8681-9760B8ECE599}" tlbid="{DAC4A4C9-F84C-4F05-A7DC-E152869499F5}" proxyStubClsid32="{00020424-0000-0000-C000-000000000046}"></comInterfaceExternalProxyStub> </assembly> Do you have any idea on this? Edit: It turns out that it really works if I specify tlbid for interfaces, and embed the manifest to both exe

  Read the article

• XML deserialization doubling up on entities

  - by Nathan Loding

  I have an XML file that I am attempting to deserialize into it's respective objects. It works great on most of these objects, except for one item that is being doubled up on. Here's the relevant portion of the XML: <Clients> <Client Name="My Company" SiteID="1" GUID="xxx-xxx-xxx-xxx"> <Reports> <Report Name="First Report" Path="/Custom/FirstReport"> <Generate>true</Generate> </Report> </Reports> </Client> </Clients> "Clients" is a List<Client> object. Each Client object has a List<Report> object within it. The issue is that when this XML is deserialized, the List<Report> object has a count of 2 -- the "First Report" Report object is in there twice. Why? Here's the C#: public class Client { [System.Xml.Serialization.XmlArray("Reports"), System.Xml.Serialization.XmlArrayItem(typeof(Report))] public List<Report> Reports; } public class Report { [System.Xml.Serialization.XmlAttribute("Name")] public string Name; public bool Generate; [System.Xml.Serialization.XmlAttribute("Path")] public string Path; } class Program { static void Main(string[] args) { List<Client> _clients = new List<Client>(); string xmlFile = "myxmlfile.xml"; System.Xml.Serialization.XmlSerializer xmlSerializer = new System.Xml.Serialization.XmlSerializer(typeof(List<Client>), new System.Xml.Serialization.XmlRootAttribute("Clients")); using (FileStream stream = new FileStream(xmlFile, FileMode.Open)) { _clients = xmlSerializer.Deserialize(stream) as List<Client>; } foreach(Client _client in _clients) { Console.WriteLine("Count: " + _client.Reports.Count); // This write "2" foreach(Report _report in _client.Reports) { Console.WriteLine("Name: " + _report.Name); // Writes "First Report" twice } } } }

  Read the article

• Polymorphic NHibernate mappings

  - by Ben Aston

  I have an interface IUserLocation and a concrete type UserLocation. When I use ICriteria, specifying the interface IUserLocation, I want NHibernate to instantiate a collection of the concrete UserLocation type. I have created an HBM mapping file using the table per concrete type strategy (shown below). However, when I query NHibernate using ICriteria I get: NHibernate cannot instantiate abstract class or interface MyNamespace.IUserLocation Can anyone see why this is? (source code for the relevant bit of NHibernate here (I think)) My ICriteria: var filter = DetachedCriteria.For<IUserLocation>() .Add(Restrictions.Eq("UserId", userId)); return filter.GetExecutableCriteria(UoW.Session) .List<IUserLocation>(); My mapping file: <hibernate-mapping xmlns="urn:nhibernate-mapping-2.2" default-lazy="true"> <class xmlns="urn:nhibernate-mapping-2.2" name="MyNamespace.IUserLocation,MyAssembly" abstract="true" table="IUserLocations"> <composite-id> <key-property name="UserId" column="UserId" type="System.Guid"></key-property> <key-many-to-one name="Location" column="LocationId" class="MyNamespace.ILocation,MyAssembly"></key-many-to-one> </composite-id> <union-subclass table="UserLocations" name="MyNamespace2.UserLocation,MyAssembly2"> <property name="IsAdmin" /> </union-subclass> </class> </hibernate-mapping>

  Read the article

• Trouble running setup package after Publishing in Visual Studio 2008

  - by Andrew Cooper

  I've got a small winform application that I've written that is running fine in the IDE. It builds with no errors or warnings. It's not using any third party controls. I'm coding in C# in Visual Studio 2008. When I Build -- Publish the application, everything seems to work fine. However, when I go and attempt to install the application via the setup.exe file I get an error message that says, "Application cannot be started." The error details are below: ERROR DETAILS Following errors were detected during this operation. * [3/18/2010 10:50:56 AM] System.Runtime.InteropServices.COMException - The referenced assembly is not installed on your system. (Exception from HRESULT: 0x800736B3) - Source: System.Deployment - Stack trace: at System.Deployment.Internal.Isolation.IStore.GetAssemblyInformation(UInt32 Flags, IDefinitionIdentity DefinitionIdentity, Guid& riid) at System.Deployment.Internal.Isolation.Store.GetAssemblyManifest(UInt32 Flags, IDefinitionIdentity DefinitionIdentity) at System.Deployment.Application.ComponentStore.GetAssemblyManifest(DefinitionIdentity asmId) at System.Deployment.Application.ComponentStore.GetSubscriptionStateInternal(DefinitionIdentity subId) at System.Deployment.Application.SubscriptionStore.GetSubscriptionStateInternal(SubscriptionState subState) at System.Deployment.Application.ComponentStore.CollectCrossGroupApplications(Uri codebaseUri, DefinitionIdentity deploymentIdentity, Boolean& identityGroupFound, Boolean& locationGroupFound, String& identityGroupProductName) at System.Deployment.Application.SubscriptionStore.CommitApplication(SubscriptionState& subState, CommitApplicationParams commitParams) at System.Deployment.Application.ApplicationActivator.InstallApplication(SubscriptionState& subState, ActivationDescription actDesc) at System.Deployment.Application.ApplicationActivator.PerformDeploymentActivation(Uri activationUri, Boolean isShortcut, String textualSubId, String deploymentProviderUrlFromExtension, BrowserSettings browserSettings, String& errorPageUrl) at System.Deployment.Application.ApplicationActivator.ActivateDeploymentWorker(Object state) I'm not sure what else to do. The only slightly odd thing I used in this application is the SQL Compact Server. Any help would be appreciated. Thanks, Andrew

  Read the article

• ASP.Net: Writing chunks of file..HTTP File upload with resume..

  - by Manish

  Please refer to question: http://stackoverflow.com/questions/2062852/resume-in-upload-file-control Now to find a solution for the above question, I want to work on it and develop a user control which can resume a HTTP File Upload process. For this, I'm going to create a temporary file on server until the upload is complete. Once the uploading is done completely then will just save it to the desired location. The procedure I have thought of is: Create a temporary file with a unique name (may be GUID) on the server. Read a chunk of file and append it to this temp file on the server. Continue step 1 to 3 until EOF is reached. Now if the connection is lost or user clicks on pause button, the writing of file is stopped and the temporary file is not deleted. Clicking on resume again or uploading the same file again will check on the server if the file exists and user whether to resume or to overwrite. (Not sure how to check if it's the same file. Also, how to step sending the chunks from client to server.) Clicking on resume will start from where it is required to be uploaded and will append that to the file on the server. (Again not sure how to do this.) Questions: Are these steps correct to achieve the goal? Or need some modifications? I'm not sure how to implement all these steps. :-( Need ideas, links... Any help appreciated...

  Read the article

< Previous Page | 34 35 36 37 38 39 40 41 42 43 44 45  | Next Page >