Search Results

Search found 8410 results on 337 pages for 'hardware reserved'.

Page 38/337 | < Previous Page | 34 35 36 37 38 39 40 41 42 43 44 45  | Next Page >

  • What is the probable failure - no BSOD, no event log, monitors sleeping, force reboot required

    - by Tyler
    Every 3 to 15 days, my PC freezes. This typically happens when the computer is idle, I'm coming home from work, back from vacation, etc. It's never happened while using my computer. The monitors are in power save mode The Caps Lock light on the (wireless) keyboard doesn't work Ctrl-alt-del has no effect, mouse (wireless) has no effect The hardware reset button and single press of power putton have no effect Computer does not appear on the network No BSOD, no memory dump Event logs have no errors or indications of problems near the time of crash. Only messages after reboot indicating that there was a reboot without a clean shutdown. Windows is set to never put the computer to sleep (just the display) Here are the vital stats of the build: OS Windows 8 Pro 64-bit CPU Intel i5-2400 Mobo Intel BOXDP67DE Micro ATX GPU MSI N460GTX Cyclone768D5/OC RAM CORSAIR XMS3 8GB (2 x 4GB) CMX8GX3M2A1333C9 PSU SeaSonic X Series X650 Gold System Drive Samsung 840 Pro 256 GB SSD Data Drive 2 x Western Digital WD20EARS 2TB in hardware RAID 1 Optical Lite-On DVD burner IHAS424-98 And here is the story of how the problem developed and what I've done to diagnose: January 2011, system built with Windows 7 64-bit, runs great. March 2011, Intel replaced the mobo because of the bad sata controllers. October 2012, upgrade to Windows 8 (problems start shortly after). January 2013, system freezes and causes network to fail for the whole house. Unplug the network cable and other devices and PCs can use the internet. Plug it back in, internet goes away for everyone. Reboot and everything is fine. March 2013, install Intel Gigabit CT PCI-E NIC, disable mobo nic in bios. Network strangeness goes away. Freezes are less frequent. Memtest shows no problems (20 passes). Early June 2013, replace Antec PSU with SeaSonic PSU. Mid June 2013, replace OCZ Vertex 2 SSD with Samsung SSD. Late June 2013, get frustrated and hope the community has some good ideas (I'm running out of budget to replace parts). My next plan of attack is setting "Turn off display" to Never and using a screen saver to see how that reacts on the next freeze. It makes me sad to waste power for up to 15 days though. Has anyone out there seen a problem like this? Any ideas on what kind of malfunction would act this way? Ideas of other diagnostic steps to take?

    Read the article

  • Maximum number of monitors Win 7 Supports?

    - by cpuguru
    I want to set up a system with (9) monitors arranged in a 3x3 grid. Is this configuration possible with Windows 7? Does it max out at a set number of monitors? Any suggestions about known working hardware combinations would be much appreciated. Currently considering (3) nVidia Quadro NVS420 cards to drive the array.

    Read the article

  • Is it better to leave your computer on all the time?

    - by Joe Schmoe
    Most of the hardware failures I've had (especially hard drive crashes) have happened when turning the machine on, so is it better to leave your computer on all the time or not? For years, I've heard arguments for... no power surges on start-up steady operating temperature for components and against... unnecessary wear on hard drives power wastage and I'm still not sure.

    Read the article

  • Floating point vs integer calculations on modern hardware

    - by maxpenguin
    I am doing some performance critical work in C++, and we are currently using integer calculations for problems that are inherently floating point because "its faster". This causes a whole lot of annoying problems and adds a lot of annoying code. Now, I remember reading about how floating point calculations were so slow approximately circa the 386 days, where I believe (IIRC) that there was an optional co-proccessor. But surely nowadays with exponentially more complex and powerful CPUs it makes no difference in "speed" if doing floating point or integer calculation? Especially since the actual calculation time is tiny compared to something like causing a pipeline stall or fetching something from main memory? I know the correct answer is to benchmark on the target hardware, what would be a good way to test this? I wrote two tiny C++ programs and compared their run time with "time" on Linux, but the actual run time is too variable (doesn't help I am running on a virtual server). Short of spending my entire day running hundreds of benchmarks, making graphs etc. is there something I can do to get a reasonable test of the relative speed? Any ideas or thoughts? Am I completely wrong? The programs I used as follows, they are not identical by any means: #include <iostream> #include <cmath> #include <cstdlib> #include <time.h> int main( int argc, char** argv ) { int accum = 0; srand( time( NULL ) ); for( unsigned int i = 0; i < 100000000; ++i ) { accum += rand( ) % 365; } std::cout << accum << std::endl; return 0; } Program 2: #include <iostream> #include <cmath> #include <cstdlib> #include <time.h> int main( int argc, char** argv ) { float accum = 0; srand( time( NULL ) ); for( unsigned int i = 0; i < 100000000; ++i ) { accum += (float)( rand( ) % 365 ); } std::cout << accum << std::endl; return 0; } Thanks in advance!

    Read the article

  • How do I figure out which SOC or SDK board to use?

    - by Ram Bhat
    Hey guys Basically I'm working on a model of an automated vacuum cleaner. I currently have made software simulation of the same. How do I figure out which SOC or SDK board to use for the hardware implementation? My code is mostly written in C. Will this be compatible with the sdk provided by board manufacturers? How do i know what clock speed,memory etc the hardware will need? I'm a software guy and have only basic knowledge about practical hardware implementations. Have some experience in programming the 8086 to carry out basic tasks.

    Read the article

  • What's the coolest hack you've seen or done?

    - by Robert S.
    As programmers, we've all put together a really cool program or pieced together some hardware in an interesting way to solve a problem. Today I was thinking about those hacks and how some of them are deprecated by modern technology (for example, you no longer need to hack your Tivo to add a network port). In the software world, we take things like drag-and-drop on a web page for granted now, but not too long ago that was a pretty exciting hack as well. One of the neatest hardware hacks I've seen was done by a former coworker at a telecom company years ago. He had a small portable television in his office and he would watch it all day long while working. To get away with it, he wired a switch to the on/off that was activated via his foot under his desk. What's the coolest hardware or software hack you've personally seen or done? What hack are you working on right now?

    Read the article

  • Graphics card initialisation problems when booting - requires a "double" boot

    - by DMA57361
    Problem Outline When booting from cold (and my machine is disconnected from main power when off, but leaving it connected doesn't help) the graphics card (single PCI-e card GeForce 460) will not initialise on the first boot, leaving me with the motherboards on-board graphics (which kick in automatically if no PCI-e card is found). However, if I restart the computer - normally I do this by powering it off just after the numlock lights up on the keyboard (ie, just after POST/BIOS and before Windows takes over), wait for the system to whirr down, and power up again - the graphics card will work correctly. Once double-booted in this matter the system seems to work correctly - with no noticeable problems. This is reproducible every time I try to boot - it has been working like this for about a month now. Background Information Sept 2010 - I suffered a hardware malfunction (crashes in Windows and graphics corruption on BIOS screens). By way of spare hardware I determined that replacing the PSU removed the issue, so I replaced the PSU with a brand new one of slightly higher power (460W replaced with 500W). Oct 2010 - The problem resurfaced. I purchased a new graphics card (GeForce 460), which removed the problem. The new graphics card immediately started having the boot initialisation problems mentioned. I presumed there was a motherboard fault all along, but because the system worked once booted, and I was temporarily out of spare money, I left the system alone and continued to use it. Early/Mid Dec 2010 - In the space of 5 days I recieved 3 instances of hard drive corruption (seemlingly fixed by chkdsk and sfc in each case...). Since I was already under the impression the motherboard was faulty, I purchased a new one ASAP, this also required new RAM (as I dropped from 4 slots to 2 and didn't want to drop mem quantity). Past 3-4 weeks - With a brand new PSU, Graphics Card, Motherboard and RAM I'm suffering the problem outlined above. So, what could be causing this and how do I can resolve it? Additional Notes Once double-booted the system seems to work entirely correctly. The graphics card problem has occured on two entirely different motherboards. I do not have the opportunity to test the graphics card in a different computer (I've only the old motherboard, which is dubious, or a really old desktop that still has an AGP port). Under load (ie, modern games for long enough for temperatures to plateau) the system remains stable and performs as expected. The software that came with the new motherboard and SpeenFan both report all voltages and temperatures are within nominal bounds, when idle and when under load. I've looking over the BIOS settings for my motherboard multiple times and can find nothing that helps. This system is configured to run with everything at standard levels - no overclocking. I've tried booting the system with only the mobo and graphics card connected (thinking maybe my new PSU was too weak for the new gfx card, even though it meets the quoted PSU requirements for the card) but the same problem persists (and really if the PSU was weak I'd have problems with the system under load). When the gfx card does not initialise the fan on its cooling unit is running, possibly slower than otherwise - but this measurement is by eye and so unreliable.

    Read the article

  • PC runs very slowly for no apparent reason

    - by GalacticCowboy
    I have a Dell Latitude D820 that I've owned for about 2.5 years. It is a Core 2 Duo T7200 2.0GHz, with 2 GB of RAM, an 80 GB hard drive and an NVidia Quadro 120M video card. The computer was purchased in late November of 2006 with XP Pro, and included a free upgrade to Vista Business. (Vista was available on MSDN but not yet via retail, so the Vista Business upgrades weren't shipped until March of '07.) Since we had an MSDN subscription at the time, I installed Vista Ultimate on it pretty much as soon as I got it. It ran happily until sometime in the spring of 2007 when Media Center (which I had never used except to watch DVDs) started throwing some kind of bizarre SQL (CE?) error. This error would pop up at random times just while using the computer. Furthermore, Media Center would no longer start. I never identified the cause of this error. I had the Vista Business upgrade by this time, so I nuked the machine, installed XP and all the drivers, and then the Vista Business upgrade. Again, it ran happily for a few months and then started behaving badly once again. Vista Business doesn't have Media Center, so this exhibited completely unrelated symptoms. For no apparent reason and at fairly random times, the machine would suddenly appear to freeze up or run very slowly. For example, launching a new application window (any app) might take 30-45 seconds to paint fully. However, Task Manager showed very low CPU load, memory, etc. I tried all the normal stuff (chkdsk, defrag, etc.) and ran several diagnostic programs to try to identify any problems, but none found anything. It eventually reached the point that the computer was all but unusable, so I nuked it again and installed XP. This time I decided to stick with XP instead of going to Vista. However, within the past couple of months it has started to exhibit the same symptoms in XP that I used to see in Vista. The computer is still under Dell warranty until December, but so far they aren't any help unless I can identify a specific problem. A friend (partner in a now-dead business) has an identical machine that was purchased at the same time. His machine exhibits none of these symptoms, which leads me to believe it is a hardware issue, but I can't figure out how to identify it. Any ideas? Utilities? Seen something similar? At this point I can't even identify any pattern to the behavior, but would be willing to run a "stress test"-style app for as long as a couple days if I had any hope that it would find something. EDIT July 17 I'm testing jerryjvl's answer regarding the video card, though I'm not sure it fully explains the symptoms yet. This morning I ran a video stress test. The test itself ran fine, but immediately afterward the PC started acting up again. I left ProcExp open and various system processes were consuming 50-60% of the CPU but with no apparent reason. For example, "services.exe" was eating about 40%, but the sum of its child processes wasn't higher than about 5%. I left it alone for several minutes to settle down, and then it was fine again. I used the "video card stability test" from firestone-group.com. Its output isn't very detailed, but it at least exercises the hardware pretty hard. EDIT July 22 Thanks for your excellent suggestions. Here is an update on what I have tried so far. Ran memtest86, SeaTools (Seagate), Hitachi drive fitness test, video card stability test (mentioned above). The video card test was the only one that seemed to produce any results, though it didn't occur during the actual test. I defragged the drive (again...) with JkDefrag I dropped the video card

    Read the article

  • How to switch 'default' sound device controlled by hardware keys in Xubuntu?

    - by Ruth
    I installed xubuntu-desktop on a 12.04 Ubuntu upgrade after finding Gnome3 lacking. I've mostly been happy, but I've found an odd and frustrating bug. My laptop has two sound 'outputs' - an HDMI-out plug I never use, and the onboard speakers/headphones. For some reason, the hardware keys have been mapped to the HDMI output, even if I set it as 'fallback' in pavucontrol, and notify-osd only displays changes in the HDMI output (though the panel indicator volume control controls onboard sound). I'd ideally like both hardware keys and notify-osd to be looking at the onboard sound, though if I can't get notify-osd it's an acceptable loss. Having to click through a bunch of stuff to change volume is driving me crazy, though. Googling suggested that it /may/ be a Pulseaudio/ALSA conflict, but the hardware keys seem to change at least indicated volume in pavucontrol for HDMI as expected (I don't have an HDMI cable to test actual sound output)

    Read the article

  • What is the state-of-the-art for using Broadcom Crystal hardware?

    - by echo-flow
    I just bought a Dell Mini 1012, which comes with a Broadcom Crystal media accelerator chip. I'd like to know what is the current state-of-the-art with regard to using this hardware on Ubuntu? What I mean by this is, what is the best way to install drivers to make use of this hardware, and what media players currently support it? I've read that XBMC currently does, but what about gstreamer? Ideally, I'd like to find a solution so that I can accelerate Flash videos using the device. It seems like one strategy may be to download Flash videos to the hard drive and play them with an external, Crystal-enabled media player, and so that seems like one option, but I'm wondering if any of the free flash alternatives (Gnash and Lightspark) support hardware acceleration of flash video using the Crystal API? It seems like there is a lot of information about all of this on the web, but it's not consolidated, and seems like a rapidly moving target, so any insight anyone may have into this would be appreciated.

    Read the article

  • Is Adobe Flash 11.2 working with Nvidia hardware again in 12.04?

    - by Oranges
    I installed the newest Nvidia-Linux drivers version number 304.43 on 12.04 installation and all Flash Videos now show me "accelerated video rendering". Previous Nvidia drivers + Adobe Flash only rendered in software, at least since Adobe officially said they turned off "hardware acceleration" for Linux, because of unstable and unsecure drivers. Has this changed? Is hardware acceleration really back? Can anyone verify this as well? The Nvidia driver 304.43 patch notes said: Fixed a bug that caused VDPAU to hang when expanding the YouTube Flash Player. Hardware: Nvidia 8600M GT

    Read the article

  • Dual monitors through 1 HDMI port

    - by Carlos
    I currently have a Dell Studio XPS 13 laptop connected to a 24" HP monitor (w2448hc). Im thinking on getting a second one, however am wondering what i need for the setup (hardware wise). Also I was wondering it there is any down side to it, or something i should be aware of. For example, image quality loss, GPU overloading, or anything important I should know. More than anything Im interested in your advice. Also the monitors do have built in speakers (HDMI sound output), is the sound going to be reproduced by only one monitor or both? Specs Model: Dell Studio XPS 13 OS: Genuine Windows® 7 Home Premium 64-Bit CPU: Intel® CoreTM 2 Duo P8600 (2.4GHz, 3MB L2 Cache, 1067MHz FSB) Chipset: NVIDIA® GeForce® MCP79MX RAM: 4GB 1067MHz DDR3 SDRAM Graphics: SLi NVIDIA® GeForce® 9500M - 256MB Thanks for your advice, if there is anything additional i need to buy an you have a personal preference pass the brand name so i can check it out. Thanks!

    Read the article

  • Must partprobe before using drive?

    - by Jeff Welling
    This is a followup question to Cannot mount /dev/sdc1 on Debian 5.0, special device /dev/sdc1 doesn't exist Basically, I have 6 SATA hard drives in a machine and I'm trying to create a RAID6 array with them. When I try to run the mdadm command to create (with the verbose option) a raid array, I see messages like "mdadm: super1.x cannot open /dev/sdf1: No such device or address" which are resolved by doing partprobe /dev/sdf and then re-running the mdadm command. The problem is that I have to run partprobe after each reboot, and from experience I don't think this is normal behaviour -- on no other linux machine do I have to partprobe the device before I can use it. Something must be going wrong, but how do I troubleshoot this to find out what? Could this be caused by a hardware problem? Edit: Additional note - before I seemed to only have this problem with one drive, but now I'm having it with 3 drives.

    Read the article

  • Dual monitors though 1 HDMI port

    - by Carlos
    I currently have a Dell Studio XPS 13 laptop connected to a 24" HP monitor (w2448hc). Im thinking on getting a second one, however am wondering what i need for the setup (hardware wise). Also I was wondering it there is any down side to it, or something i should be aware of. For example, image quality loss, GPU overloading, or anything important I should know. More than anything Im interested in your advice. Also the monitors do have built in speakers (HDMI sound output), is the sound going to be reproduced by only one monitor or both? Specs Model: Dell Studio XPS 13 OS: Genuine Windows® 7 Home Premium 64-Bit CPU: Intel® CoreTM 2 Duo P8600 (2.4GHz, 3MB L2 Cache, 1067MHz FSB) Chipset: NVIDIA® GeForce® MCP79MX RAM: 4GB 1067MHz DDR3 SDRAM Graphics: SLi NVIDIA® GeForce® 9500M - 256MB Thanks for your advice, if there is anything additional i need to buy an you have a personal preference pass the brand name so i can check it out. Thanks!

    Read the article

  • Is there any multi-touch graphics tablet with Linux drivers?

    - by Zifre
    After watching the absolutely amazing 10/GUI video, I have been dying to try to implement something like this. I can do the software side quite easily, but I don't have the hardware. The Wacom Bamboo Fun would work, but the Linux drivers don't support the multi-touch features. Microsoft's "UnMouse Pad" looks like the perfect solution, but it is not commercially available yet. Are there any similar devices that would work? Alternatively, is there a way to build a DIY version? (It is fairly easy to build a multi-touch display with a webcam and IR LEDs, but it would not be pressure sensitive. Does anyone have any info on how the UnMouse Pad works and if it is possible to build one?) EDIT: I should clarify that I don't want a multi-touch display. I want the sensor to be separate from the display. If that sounds crazy, watch the 10/GUI video.

    Read the article

  • How can I make it difficult to install a new operating system on a certain computer?

    - by D W
    I want to host a website on a desktop computer running Ubuntu with a Windows virtual machine. I will give away the computer in exchange for a number of months of remote web hosting. I want to add some kind of lock (hardware or otherwise) so that the end users will have difficulty just reinstalling Windows and using the machine as they want, in contradiction to the contract. Ideally, I'd want the machine to die if reinstallation of the OS is attempted. It doesn't have to be completely insurmountable, but it has to be difficult enough to prevent casual reinstallation. Perhaps on bootup the system can check whether certain files exist on the computer and refuse to boot if they do not. I don't know if this is possible, but maybe BIOS is password protected, and searches for files before boot up. The files it looks for could be date sensitive, i.e. require remote replacement on a schedule.

    Read the article

  • Laptop HDD failure imminent?

    - by Andrei Rinea
    I have an HP Compaq 615 laptop with an 160 GB 7200 rpm HDD. Hasn't been dropped or shaken, in fact it almost always stayed on my desk. I've treated it as nice as I could. The other day, however, my OS froze and I could hear a repeated clink-clink-clink coming from the HDD zone of the laptop. I had to switch off hardware-ly the laptop and re-start it. It worked very well after, including now. However I backed up immediately the core data on my USB drive and ordered an external USB HDD for periodic backups. Will it die soon or it was just a "blip"?

    Read the article

  • Defragment an Exchange Volume

    - by IceMage
    The Scenario: I use a dedicated volume (RAID volume) to store all of my data for my Exchange 2007 server. Today, out of curiosity, I decided to check up on how fragmented the files on this data volume were. To my surprise, the answer is extremely. So, a three part question: First and Foremost, SHOULD I defragment this volume (after a full backup of course)? Be specific as to why not if I should not, or reasons I absolutely should if I should. Second, about how much time should I allow for during this maintenance period per gigabyte. The drives are all 7200 RPM SATA drives on a Hardware RAID 5 controller (Perc 5i/6i, can't remember), the files are extremely fragmented. (Over 5000 file fragments per gigabyte). Third, is there something wrong here? It seems to me like the drive shouldn't be this fragmented. Could something be configured incorrectly that could be causing this to happen?

    Read the article

  • Mecer laptop gives me a white screen when I close the screen

    - by Dane Rossenrode
    I'm having a very strange hardware issue with my Mecer m770u laptop with intel i7 quad core, etc... I'm wondering if anyone has had this issue with any other brand/model of laptop, and what I should fix/replace to solve it...? Basically when I close the screen of the laptop, the screen often goes completely white. If I open it slowly and smoothly again, the screen returns to normal. But if I close the screen when the computer is off, and then switch it on, it boots with a white screen, and opening it slowly/smoothly doesn't help. I have to then switch it on and off a few times before it returns to normal. Makes travelling with my laptop really difficult! Any suggestions?

    Read the article

  • Freezing of computer while watching flash videos (contd)

    - by t3st
    I have asked this similar question Computer freezing while watching Flash videos from net two week before. As i mentioned in my previous problem my computer freezes while watching online videos showing 100% cpu usage. I have tried the suggestions given in that query and I have formated my whole computer and installed windows and other softwares (with latest updates) but the problem still presisting. If i watch a video online approximately after one hour my system shows very high cpu usage and when i close my browser cpu usage comes to normal(i tried to watch Cybergeddon but my computer is freezing from start,and also other youtube videos). Can you tell me whether its an hardware problem? if yes can you give any possible explanation( eg:motherboard problem,over heating etc) because i want to tell those reasons to my computer mechanic.

    Read the article

  • hosting environment for delivering FLVs

    - by Gotys
    What would be the ideal hardware setup for pushing lots of bandwith on a tube site? We have ever-expanding cloud storage where users upload the movies, then we have these web-delivery machines which cache the FLV files on its local harddrives and deliver them to users. Each cache machine can deliver 1200 mbits/s , if it has SAS 8 harddrives. Such a cache machine costs us $550/month for 8x160gb -- so each machine can cache only 160GB at any given time. If we want to cache more then 160gb , we need to add another machine..another $550/month..etc. This is very un-economical so I am wondering if we have any experts here who can figure out a better setup. I've been looking into "gluster FS", but I am not sure if this thing can push a lot of bandwith. Any ideas highly appreciated. Thank you!

    Read the article

  • What is this component?

    - by bAN
    Hi everyone, i'm just looking an old mother board waiting for my favorite TVShow and and i wonder what's this component? Every motherboard i've seen have this kind of solenoid (I am sure that you already settled this question). But what is this? What is his function? If an hardware specialist can try to answer my question.. I will be an happy man.. I join a Picture.. Strange and mystic kind of solenoid.

    Read the article

  • How to recover from a drive failure in a RAID 5 configuration?

    - by Philip Fourie
    This morning a drive failed on our database server. The drive array (3 disks) is setup in a RAID 5 configuration. While we wait for a drive replacement we are preparing for a recovery strategy. Users are continuing to work on the system, albeit very slowly (don't know why??). How does one install the new drive - will the data for this drive automatically be rebuilt from the parity or is there another process we should follow? Edit: This is a hardware RAID controller. (Thanks for the answers so far, appreciated)

    Read the article

< Previous Page | 34 35 36 37 38 39 40 41 42 43 44 45  | Next Page >