Search Results

Search found 18311 results on 733 pages for 'input director'.

Page 38/733 | < Previous Page | 34 35 36 37 38 39 40 41 42 43 44 45  | Next Page >

  • Redirect input from one terminal to another

    - by Niki Yoshiuchi
    I have sshed into a linux box and I'm using dvtm and bash (although I have also tried this with Gnu screen and bash). I have two terminals, current /dev/pts/29 and /dev/pts/130. I want to redirect the input from one to the other. From what I understand, in /dev/pts/130 I can type: cat </dev/pts/29 And then when I type in /dev/pts/29 the characters I type should show up in /dev/pts/130. However what ends up happening is that every other character I type gets redirected. For example, if I type "hello" I get this: /dev/pts/29 | /dev/pts/130 $ | $ cat </dev/pts/29 $ el | hlo This is really frustrating as I need to do this in order to redirect the io of a process running in gdb (I've tried both run /dev/pts/# and set inferior-tty /dev/pts/# and both resulted in the aforementioned behavior). Am I doing something wrong, or is this a bug in bash/screen/dvtm?

    Read the article

  • Input not supported message when monitor is powered off then back on

    - by Jason Down
    I've been getting a message on my monitor where "Input not supported" is floating around. This only happens when I manually turn the monitor off and then later turn it back on. Leaving the monitor on and allowing it to go to the screen saver doesn't seem to cause the issue (but I prefer to turn the monitor off if I'm going to be away from the computer for any length of time). Any ideas what might cause this, only when the monitor is turned off manually? Specs: Acer X203w mointor Radeon 9600 Pro Video card Linux Mint 8 Resolution 1680 x 1050 (16:10 - Preferred native resolution for the monitor) Refresh Rate 60hz Here is what is in my xorg.conf file: Section "Device" Identifier "Radeon 9600" Driver "ati" BusID "PCI:1:0:0" Option "XAANoOffscreenPixmaps" Option "AccelMethod" "XAA" EndSection Section "Screen" Identifier "Default Screen" Device "Radeon 9600" DefaultDepth 24 SubSection "Display" Depth 24 Modes "1680x1050" "1440x900" "1024x768" EndSubSection EndSection Section "DRI" Mode 0666 EndSection Section "Extensions" Option "Composite" "Enable" EndSection

    Read the article

  • Can't add German as input language in Windows XP

    - by jdm
    I have a laptop that was brought to a computer shop for a hard disk problem. They replaced the disk and reinstalled windows XP, although the English version (the laptop has a German keyboard). I'd like to switch the input language to German. Usually I know how to do this (via "Regional and Language Options"), the problem is when I choose Languages/Details/Add... it doesn't offer me the German keyboard layout: It also uses the "Standard 101/102-Key or Microsoft Natural PS/2 Keyboard" driver - the laptop's keyboard is a 104/105 key German version. I can't seem to change this. Did I just miss the setting, or what is going on here?

    Read the article

  • Redirect one input from one terminal to another

    - by Niki Yoshiuchi
    I have sshed into a linux box and I'm using dvtm and bash (although I have also tried this with Gnu screen and bash). I have two terminals, current /dev/pts/29 and /dev/pts/130. I want to redirect the input from one to the other. From what I understand, in /dev/pts/130 I can type: cat </dev/pts/29 And then when I type in /dev/pts/29 the characters I type should show up in /dev/pts/130. However what ends up happening is that every other character I type gets redirected. For example, if I type "hello" I get this: /dev/pts/29 | /dev/pts/130 $ | $ cat </dev/pts/29 $ el | hlo This is really frustrating as I need to do this in order to redirect the io of a process running in gdb (I've tried both run /dev/pts/# and set inferior-tty /dev/pts/# and both resulted in the aforementioned behavior). Am I doing something wrong, or is this a bug in bash/screen/dvtm?

    Read the article

  • php-fpm not working several days,return 'No input file specified'

    - by Magic
    My server running ubuntu 64bit, nginx, php-fpm. Everything is working well. But several days after. The browser display 'No input file specified'.After I restart php-fpm. Everything run well again.But this situation occur again and again.So I must restart the php-fpm several days.Anyone know what's the problem? nginx -V output sshadmin@ubuntu:~$ nginx -V nginx: nginx version: nginx/0.9.7 nginx: built by gcc 4.4.3 (Ubuntu 4.4.3-4ubuntu5) nginx: TLS SNI support enabled nginx: configure arguments: --user=www --group=www --prefix=/usr/local/nginx --with-http_stub_status_module --with-http_ssl_module --with-http_gzip_static_module

    Read the article

  • dd clone hard drive: Input/Output Error though "chkdsk" says OK

    - by unknown (google)
    Hi, I've used dd to clone hard drives before using 'dd' and a live cd, but have run into a problem. The issue: dd fails with an "Input/Output Error" on /dev/sda3 , even though windows "check disk" (chkdsk) says it's ok. Context: Trying to replace my laptop hard drive w/ a faster one of the same size Laptop has NTFS on a 320gb hard drive Booting into knoppix Knoppix recognizes 'original' drive (/dev/sda) I am using a usb connection for ‘new' drive (irrelevant, but just an fyi) Knoppix recognizes the usb drive as /dev/sdb Using dd, as follows: dd if=/dev/sda of=/dev/sdb "dd" gives the I/O error above at 82Gb (out of 320Gb) I then tried checking each partition as follows and found it failed on /dev/sda3: dd if=/dev/sda1 of=/dev/null dd if=/dev/sda2 of=/dev/null dd if=/dev/sda3 of=/dev/null I have ran windows xp chkdsk on the offending drive in both "find only" and "find and fix" mode and it reports no errors Question How can I find and fix the error on my original hard drive partition (i.e. /dev/sda3) so that dd reads it successfully?

    Read the article

  • Powershell script to append an extension to a file, input from CSV

    - by Jeremy
    Hi All, All I need is to have an Excel list of file paths and use Powershell to append (not replace) the same extension on to each file. It should be very simple, right? The problem I'm seeing is that if I go input-csv -path myfile.csv | write-host I get the following output: @{FullName=C:\Users\jpalumbo\test\appendto.me} @{FullName=C:\Users\jpalumbo\test\append_list.csv} @{FullName=C:\Users\jpalumbo\test\leavemealone.txt} In other words it looks like it's outputting the CSV "formatting" as well. However if I just issue import-csv -path myfile.csv, the output is what I expect: FullName -------- C:\Users\jpalumbo\test\appendto.me C:\Users\jpalumbo\test\append_list.csv C:\Users\jpalumbo\test\leavemealone.txt Clearly there's no file called "@{FullName=C:\Users\jpalumbo\test\leavemealone.txt}" and a rename on that won't work, so I'm not sure how to best get this data out of the import-csv command, or whether to store it in an object, or what. Thanks!!

    Read the article

  • Apache .htaccess problem: No input file specified.

    - by Michal M
    Hello Everyone, Can someone help me with this. I'm feeling like I've been hitting my head against a wall for over 2 hrs now. I've got Apache 2.2.8 + PHP 5.2.6 installed on my machine and the .htacces with code below works fine, no errors. RewriteEngine on RewriteCond $1 !^(index\.php|css|gfx|js|swf|robots\.txt|favicon\.ico) RewriteRule ^(.*)$ /index.php/$1 [L] The same code on my hosting provider server gives me a 404 error code and outputs only: No input file specified. index.php IS there. I know they have Apache installed (cannot find version info anywhere) and they're running PHP v5.2.8. I'm on windows xp 64-bit, they're running some Linux and php in cgi/fastcgi mode. Can anyone suggest what could be the problem? PS. if that's important that's for CodeIgniter to work with friendly URLs.

    Read the article

  • Language bar switched input types on me.

    - by Elijah
    I learned Japanese, but I'm not native to Japan, so I never had a Japanese keyboard. I used to use the language bar to go back and forth between English and Japanese, simply typing the words in romaji and having windows convert it into either hiragana, katakana and sometimes Kanji. Suddenly, my input type changes. I am no longer able to simply type in English, it changed my keyboard into a native Japanese keyboard, and what's worse it doesn't even allow me to write in hiragana, which I would need way more than katakana. Can anyone tell me how to restore it to the old setting where I simply chose what the output dialect would be, and typed the words phonetically in english and have it translate the sounds for me into japanese characters?

    Read the article

  • Backup Script - Could Not Open Input File

    - by Iestyn
    this is the backup script that I've got going: http://pastebin.com/4g4E6wUz This is the cron info: /usr/local/bin/php /home/backups/backup-db.php --filename-dated ALL No matter what I do, I keep on getting this error: Could not open input file: /home/backups/backup-db.php - That's the correct location of the file. I just don't know what else to try, I feel I've been working on this for so long now that I've explored every avenue, on the other hand sometimes I think that the time I've spent on it is clouding my thoughts and I'm missing something stupidly obvious. Just wondering if someone can give me a few pointers? Also on a last note, does anyone know of a way/article to auto generate a full backup of cPanel every * amount of days and store it in a location that I want? Kind Regards.

    Read the article

  • rsync : Read input from a file and sync accordingly

    - by Dheeraj
    I have a text file which contains the list of files and directories that I want to copy (one on a line). Now I want rsync to take this input from my text file and sync it to the destination that I provide. I've tried playing around with "--include-from=FILE" and "--file-from=FILE" options of rsync but is is just not working I also tried pre-fixing "+" on each line in my file but still it is not working. I have tried coming with various filter PATTERNs as outlined in the rsync man page but it is not working. Could someone provide me correct syntax for this use case. I've tried above things on Fedora 15, RHEL 6.2 and Ubuntu 10.04 and none worked. So i am definitely missing something. Many thanks.

    Read the article

  • "Input not Supported" on external monitor

    - by Shalan
    when it rains, it pours! Im helping a friend with his Dell Inspiron 1520. The hdd crashed and and top of that, the screen is cracked. I've replaced the hdd (SATA-5400), but the lcd replacement is only comin in a months time. I've tried to: hook the laptop up to an Acer 18.5" lcd monitor via VGA, boot up into Windows 7 installer, get to the Step-1 screen, Switch to external display (Function-F8) ...and get the "Input not supported" message on the Acer lcd. I know that this is a resolution problem, but cant for the life of me figure out how to solve this. I've also tried, hooking it up to my TV via Composite cables (got a VGA-Composite adaptor). Please could someone advise me what to do? -Thank u!

    Read the article

  • Double try_files to solve the nginx's "No input file specified" issue

    - by Howard
    I am following the nginx's wiki (http://wiki.nginx.org/WordPress) to setup my wordpress location / { try_files $uri $uri/ /index.php?$args; } By using the above lines, when a static file which is not found it will redirect to index.php of wordpress, that is okay but.. Problem: When I request an non-existence php script, e.g. http://www.example.com/foo.php, nginx will give me No input file specified I want nginx to return 404 instead of the above message, so in the main fcgi config, I add the 2nd try_files location ~ \.php$ { try_files $uri =404; fastcgi_split_path_info ^(.+\.php)(/.+)$; include /etc/nginx/fastcgi_params; ... } And this worked, but I am looking if there are any better way to handle it?

    Read the article

  • powershell Read-host does not stop for input

    - by llirik42
    I thought this would be fairly basic, but i'm stuck. I have 3 lines of powershell script in which I want to collect a mailbox name from user input, then create names based on that mailbox name. (later the script proceeds to create the groups in AD, etc) my problem is that when I run all 3 of these lines by pasting them into powershell window, I don't get a change to enter the response to read-host. Instead the script just scrolls through to the next line and uses it as the response for the Read-Host here's the powershell: $name = read-host "enter group name" $groupfull = ($name+'.Full'a) $groupsendas = ($name+'.SendAs') Here's the output: PS C:\Users\kg> $name = read-host "enter group name" enter group name: $groupfull = ($name+'.Full') PS C:\Users\kg> $groupsendas = ($name+'.SendAs') PS C:\Users\kg> Thanks in advance

    Read the article

  • No input file specified with nginx

    - by user66700
    I'm getting "No input file specified." when I attempt to browse to the phpmyadmin domain, not sure what I'm doing wrong.. using both php-fpm and php-cgi, php-fpm is currently working another directory fine..Had to change the port number to 8888 since -fpm was already using 9000 http://pastebin.com/kdEckiL3 from nginx.conf: server { listen 80; server_name phpmyadmin.domain.com; access_log /home/fanboy/logs/phpmyadmin.access_log; error_log /home/fanboy/logs/phpmyadmin.error_log; location / { root /usr/share/phpmyadmin; index index.php; } location ~ \.php$ { fastcgi_pass 127.0.0.1:8888; fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME /usr/share/phpmyadmin$fastcgi_script_name; include /usr/local/nginx/conf/fastcgi.conf; } }

    Read the article

  • Second Monitor "Input Not Supported"

    - by Drew
    I have two identical monitors (new Acer s211hl) with a native resolution of 1920x1080. When enabling dual monitor support in Windows 7, the primary monitor works as expected, but the second monitor says, "Input not Supported" and fails to display anything. If I change the resolution of the second monitor to 1440x900, it works as expected. Likewise, if I set it to 1920x1080 with a refresh rate of 30hz, the monitor displays video. However, neither of these are solutions, because the output looks very blurry, and the content is stretched. I am using the following hardware: Monitors: Acer s211hl Motherboard: Asus F1A75M-Pro CPU/GPU: AMD A8-3850 with integrated Radeon HD 6550D graphics I suspect that there is probably an issue with the integrated graphics or motherboard not being able to output to two 1920x1080 monitors, but I am hoping for official confirmation.

    Read the article

  • Input multiple file names in windows open file dialog box

    - by goodiet
    Windows 7 allows you to select multiple files to open at once by using ctrl or shift key. The "File Name" input field at the bottom of the dialog box would auto populate with the following sample: "aaa.txt" "bbb.txt" "ccc.txt" "ddd.txt" I have 14,000 files in a folder and I only need a range of files (approx 500). When I use the shift key to select a range of files, the "File Name" field auto populates all 500 file names. Windows would cut me off at the 260th character when I try to paste in a pre-generated string into the "File Name" field. Is there a way to bypass the 260 character limit so it would accept my entire string with 500 file names?

    Read the article

  • Redirect physical keyboard input to SSH

    - by Dimme
    I'm having a raspberry pi running debian linux and I have an RFID reader connected to it. The RFID reader behaves like a keyboard. Every time I scan a tag it types then number of the tag and then carriage return. My problem is that I want to redirect the output of the RFID reader to my SSH session. That means anything that is typed to the physical keyboard of the pi should be displayed in my SSH window. I have tried with: cat /dev/tty0 but it wont work because the user is not logged in. Is there a way to disable the login screen after the pi boots and then redirect all input through SSH?

    Read the article

  • "No input file specified" - unable to access phpMyAdmin using debian squeeze

    - by guiltybyintent
    I have installed phpMyAdmin on my VPS LAMP server (Debian Squeeze/Apache2/MySQL/PHP5), but am unable to access it: //my-ip/phpmyadmin/ and //my-domain/phpmyadmin/ both produce the following error message: "No input file specified". The phpMyAdmin FAQ identifies this as a permission problem, but the suggested solution seems not to apply to my situation. Every other solution I have come across involves removing/purging and reinstalling phpmyadmin - which I have done several times, always to the same result. Previous posts in this forum typically relate to Nginx, which I have not installed. Thanks in advance for any help!

    Read the article

  • iptables to allow input and output traffic to and from web server only

    - by Caedmon
    I have an Elastic Search server which seems to have been exploited (it's being used for a DDoS attack having had NO firewall for about a month). As a temporary measure while I create a new one I was hoping to block all traffic to and from the server which wasn't coming from or going to our web server. Will these iptables rules achieve this: iptables -I INPUT \! --src 1.2.3.4 -m tcp -p tcp --dport 9200 -j DROP iptables -P FORWARD \! --src 1.2.3.4 DROP iptables -P OUTPUT \! --src 1.2.3.4 DROP The first rule is tried and tested but obviously wasn't preventing traffic coming from my server to other IP addresses so I was hoping I could add the second two rules to full secure it.

    Read the article

  • VMWare Input/Output error on ubuntu host Win7 guest

    - by CShipley
    I am running ubuntu 10.10 as my host with Windows 7 as the guest. About a couple weeks ago I started getting error pop-ups from vmware reporting inability to read or write to a particular file. On futher investigation, I've noticed that I cannot copy that particular file from the linux command line even as root. I get the same input/output error. The SMART utility tells me I have 69 bad sectors on the disk (it is 1 TB) So my question is 1) How do I tell if that HD is going bad? 2) How can I move the VM files to a different part of the disk if I get read/write errors when I try to copy?

    Read the article

  • VMWare Input/Output error on ubuntu host Win7 guest

    - by CShipley
    I am running ubuntu 10.10 as my host with Windows 7 as the guest. About a couple weeks ago I started getting error pop-ups from vmware reporting inability to read or write to a particular file. On futher investigation, I've noticed that I cannot copy that particular file from the linux command line even as root. I get the same input/output error. The SMART utility tells me I have 69 bad sectors on the disk (it is 1 TB) So my question is 1) How do I tell if that HD is going bad? 2) How can I move the VM files to a different part of the disk if I get read/write errors when I try to copy?

    Read the article

  • iptables not allowing mysql connections to aliased ips?

    - by Curtis
    I have a fairly simple iptables firewall on a server that provides MySQL services, but iptables seems to be giving me very inconsistent results. The default policy on the script is as follows: iptables -P INPUT DROP I can then make MySQL public with the following rule: iptables -A INPUT -p tcp --dport 3306 -j ACCEPT With this rule in place, I can connect to MySQL from any source IP to any destination IP on the server without a problem. However, when I try to restrict access to just three IPs by replacing the above line with the following, I run into trouble (xxx=masked octect): iptables -A INPUT -p tcp --dport 3306 -m state --state NEW -s 208.XXX.XXX.184 -j ACCEPT iptables -A INPUT -p tcp --dport 3306 -m state --state NEW -s 208.XXX.XXX.196 -j ACCEPT iptables -A INPUT -p tcp --dport 3306 -m state --state NEW -s 208.XXX.XXX.251 -j ACCEPT Once the above rules are in place, the following happens: I can connect to the MySQL server from the .184, .196 and .251 hosts just fine as long as am connecting to the MySQL server using it's default IP address or an IP alias in the same subnet as the default IP address. I am unable to connect to MySQL using IP aliases that are assigned to the server from a different subnet than the server's default IP when I'm coming from the .184 or .196 hosts, but .251 works just fine. From the .184 or .196 hosts, a telnet attempt just hangs... # telnet 209.xxx.xxx.22 3306 Trying 209.xxx.xxx.22... If I remove the .251 line (making .196 the last rule added), the .196 host still can not connect to MySQL using IP aliases (so it's not the order of the rules that is causing the inconsistent behavior). I know, this particular test was silly as it shouldn't matter what order these three rules are added in, but I figured someone might ask. If I switch back to the "public" rule, all hosts can connect to the MySQL server using either the default or aliased IPs (in either subnet): iptables -A INPUT -p tcp --dport 3306 -j ACCEPT The server is running in a CentOS 5.4 OpenVZ/Proxmox container (2.6.32-4-pve). And, just in case you prefer to see the problem rules in the context of the iptables script, here it is (xxx=masked octect): # Flush old rules, old custom tables /sbin/iptables --flush /sbin/iptables --delete-chain # Set default policies for all three default chains /sbin/iptables -P INPUT DROP /sbin/iptables -P FORWARD DROP /sbin/iptables -P OUTPUT ACCEPT # Enable free use of loopback interfaces /sbin/iptables -A INPUT -i lo -j ACCEPT /sbin/iptables -A OUTPUT -o lo -j ACCEPT # All TCP sessions should begin with SYN /sbin/iptables -A INPUT -p tcp ! --syn -m state --state NEW -j DROP # Accept inbound TCP packets (Do this *before* adding the 'blocked' chain) /sbin/iptables -A INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT # Allow the server's own IP to connect to itself /sbin/iptables -A INPUT -i eth0 -s 208.xxx.xxx.178 -j ACCEPT # Add the 'blocked' chain *after* we've accepted established/related connections # so we remain efficient and only evaluate new/inbound connections /sbin/iptables -N BLOCKED /sbin/iptables -A INPUT -j BLOCKED # Accept inbound ICMP messages /sbin/iptables -A INPUT -p ICMP --icmp-type 8 -j ACCEPT /sbin/iptables -A INPUT -p ICMP --icmp-type 11 -j ACCEPT # ssh (private) /sbin/iptables -A INPUT -p tcp --dport 22 -m state --state NEW -s xxx.xxx.xxx.xxx -j ACCEPT # ftp (private) /sbin/iptables -A INPUT -p tcp --dport 21 -m state --state NEW -s xxx.xxx.xxx.xxx -j ACCEPT # www (public) /sbin/iptables -A INPUT -p tcp --dport 80 -j ACCEPT /sbin/iptables -A INPUT -p tcp --dport 443 -j ACCEPT # smtp (public) /sbin/iptables -A INPUT -p tcp --dport 25 -j ACCEPT /sbin/iptables -A INPUT -p tcp --dport 2525 -j ACCEPT # pop (public) /sbin/iptables -A INPUT -p tcp --dport 110 -j ACCEPT # mysql (private) /sbin/iptables -A INPUT -p tcp --dport 3306 -m state --state NEW -s 208.xxx.xxx.184 -j ACCEPT /sbin/iptables -A INPUT -p tcp --dport 3306 -m state --state NEW -s 208.xxx.xxx.196 -j ACCEPT /sbin/iptables -A INPUT -p tcp --dport 3306 -m state --state NEW -s 208.xxx.xxx.251 -j ACCEPT Any ideas? Thanks in advance. :-)

    Read the article

  • copying link id to an input field

    - by zurna
    The code works fine when links are images. But I have a problem when there are flash movies. Another page opens with undefined in the address bar when it needs to copy the link id to imagesID input box. <script type="text/javascript"> var $input = $("#imagesID"); // <-- your input field $('a.thumb').click(function() { var value = $input.val(); var id = $(this).attr('id'); if (value.match(id)) { value = value.replace(id + ';', ''); } else { value += id + ';'; } $input.val(value); }); </script> <ul class="thumbs"> <li> <a class="thumb" id="62"> <img src="/FLPM/media/images/2A9L1V2X_sm.jpg" alt="Dock" id="62" class="floatLeft" /> </a> <br /> <a href="?Process=&IMAGEID=62" class="thumb"><span class="floatLeft">DELETE</span></a> </li> <li> <a class="thumb" id="61"> <img src="/FLPM/media/images/0E7Q9Z0C_sm.jpg" alt="Desert Landscape" id="61" class="floatLeft" /> </a> <br /> <a href="?Process=&IMAGEID=61" class="thumb"><span class="floatLeft">DELETE</span></a> </li> <li> <a class="thumb" id="60"> <img src="/FLPM/media/images/8R5D7M8O_sm.jpg" alt="Creek" id="60" class="floatLeft" /> </a> <br /> <a href="?Process=&IMAGEID=60" class="thumb"><span class="floatLeft">DELETE</span></a> </li> <li> <a class="thumb" id="59"> <object classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000" codebase="http://active.macromedia.com/flash4/cabs/swflash.cab#version=4,0,0,0" id="59" width="150" height="100" style="float:left; border:5px solid #CCCCCC; margin:5px 10px 10px 0;"> <param name="scale" value="exactfit"> <param name="AllowScriptAccess" value="always" /> <embed name="name" src="http://www.refinethetaste.com/FLPM/media/flashes/7P4A6K7M.swf" quality="high" scale="exactfit" width="150" height="100" type="application/x-shockwave-flash" AllowScriptAccess="always" pluginspage="http://www.macromedia.com/shockwave/download/index.cgi? P1_Prod_Version=ShockwaveFlash"> </embed> </object> </a> <br /> <a href="?Process=&IMAGEID=59" class="thumb"><span class="floatLeft">DELETE</span></a> </li> </ul>

    Read the article

  • Java ME scorecard with vector and multiple input fields/screens

    - by proximity
    I have made a scorecard with 5 holes, for each a input field (shots), and a image is shown. The input should be saved into a vector and shown on each hole, eg. hole 2: enter shots, underneath it "total shots: 4" (if you have made 4 shots on hole 1). In the end I would need a sum up of all shots, eg. Hole 1: 4 Hole 2: 3 Hole 3: 2 ... Total: 17 Could someone please help me with this task? { f = new Form("Scorecard"); d = Display.getDisplay(this); mTextField = new TextField("Shots:", "", 2, TextField.NUMERIC); f.append(mTextField); mStatus = new StringItem("Hole 1:", "Par 3, 480m"); f.append(mStatus); try { Image j = Image.createImage("/hole1.png"); ImageItem ii = new ImageItem("", j, 3, "Hole 1"); f.append(ii); } catch (java.io.IOException ioe) {} catch (Exception e) {} f.addCommand(mBackCommand); f.addCommand(mNextCommand); f.addCommand(mExitCommand); f.setCommandListener(this); Display.getDisplay(this).setCurrent(f); } public void startApp() { mBackCommand = new Command("Back", Command.BACK, 0); mNextCommand = new Command("Next", Command.OK, 1); mExitCommand = new Command("Exit", Command.EXIT, 2); } public void pauseApp() { } public void destroyApp(boolean unconditional) { } public void commandAction(Command c, Displayable d) { if (c == mExitCommand) { destroyApp(true); notifyDestroyed(); } else if ( c == mNextCommand) { // -> go to next hole input! save the mTextField input into a vector. } } } ------------------------------ Full code --------------------------------- import java.util.; import javax.microedition.midlet.; import javax.microedition.lcdui.*; public class ScorerMIDlet extends MIDlet implements CommandListener { private Command mExitCommand, mBackCommand, mNextCommand; private Display d; private Form f; private TextField mTextField; private Alert a; private StringItem mHole1; private int b; // repeat holeForm for all five holes and add the input into a vector or array. Display the values in the end after asking for todays date and put todays date in top of the list. Make it possible to go back in the form, eg. hole 3 - hole 2 - hole 1 public void holeForm(int b) { f = new Form("Scorecard"); d = Display.getDisplay(this); mTextField = new TextField("Shots:", "", 2, TextField.NUMERIC); f.append(mTextField); mHole1 = new StringItem("Hole 1:", "Par 5, 480m"); f.append(mHole1); try { Image j = Image.createImage("/hole1.png"); ImageItem ii = new ImageItem("", j, 3, "Hole 1"); f.append(ii); } catch (java.io.IOException ioe) {} catch (Exception e) {} // Set date&time in the end long now = System.currentTimeMillis(); DateField df = new DateField("Playing date:", DateField.DATE_TIME); df.setDate(new Date(now)); f.append(df); f.addCommand(mBackCommand); f.addCommand(mNextCommand); f.addCommand(mExitCommand); f.setCommandListener(this); Display.getDisplay(this).setCurrent(f); } public void startApp() { mBackCommand = new Command("Back", Command.BACK, 0); mNextCommand = new Command("OK-Next", Command.OK, 1); mExitCommand = new Command("Exit", Command.EXIT, 2); b = 0; holeForm(b); } public void pauseApp() {} public void destroyApp(boolean unconditional) {} public void commandAction(Command c, Displayable d) { if (c == mExitCommand) { destroyApp(true); notifyDestroyed(); } else if ( c == mNextCommand) { holeForm(b); } } }

    Read the article

< Previous Page | 34 35 36 37 38 39 40 41 42 43 44 45  | Next Page >