input sanitization - Page 38

Double try_files to solve the nginx's "No input file specified" issue

- by Howard

I am following the nginx's wiki (http://wiki.nginx.org/WordPress) to setup my wordpress location / { try_files $uri $uri/ /index.php?$args; } By using the above lines, when a static file which is not found it will redirect to index.php of wordpress, that is okay but.. Problem: When I request an non-existence php script, e.g. http://www.example.com/foo.php, nginx will give me No input file specified I want nginx to return 404 instead of the above message, so in the main fcgi config, I add the 2nd try_files location ~ \.php$ { try_files $uri =404; fastcgi_split_path_info ^(.+\.php)(/.+)$; include /etc/nginx/fastcgi_params; ... } And this worked, but I am looking if there are any better way to handle it?

Read the article

powershell Read-host does not stop for input

- by llirik42

I thought this would be fairly basic, but i'm stuck. I have 3 lines of powershell script in which I want to collect a mailbox name from user input, then create names based on that mailbox name. (later the script proceeds to create the groups in AD, etc) my problem is that when I run all 3 of these lines by pasting them into powershell window, I don't get a change to enter the response to read-host. Instead the script just scrolls through to the next line and uses it as the response for the Read-Host here's the powershell: $name = read-host "enter group name" $groupfull = ($name+'.Full'a) $groupsendas = ($name+'.SendAs') Here's the output: PS C:\Users\kg> $name = read-host "enter group name" enter group name: $groupfull = ($name+'.Full') PS C:\Users\kg> $groupsendas = ($name+'.SendAs') PS C:\Users\kg> Thanks in advance

Read the article

Second Monitor "Input Not Supported"

- by Drew

I have two identical monitors (new Acer s211hl) with a native resolution of 1920x1080. When enabling dual monitor support in Windows 7, the primary monitor works as expected, but the second monitor says, "Input not Supported" and fails to display anything. If I change the resolution of the second monitor to 1440x900, it works as expected. Likewise, if I set it to 1920x1080 with a refresh rate of 30hz, the monitor displays video. However, neither of these are solutions, because the output looks very blurry, and the content is stretched. I am using the following hardware: Monitors: Acer s211hl Motherboard: Asus F1A75M-Pro CPU/GPU: AMD A8-3850 with integrated Radeon HD 6550D graphics I suspect that there is probably an issue with the integrated graphics or motherboard not being able to output to two 1920x1080 monitors, but I am hoping for official confirmation.

Read the article

No input file specified with nginx

- by user66700

I'm getting "No input file specified." when I attempt to browse to the phpmyadmin domain, not sure what I'm doing wrong.. using both php-fpm and php-cgi, php-fpm is currently working another directory fine..Had to change the port number to 8888 since -fpm was already using 9000 http://pastebin.com/kdEckiL3 from nginx.conf: server { listen 80; server_name phpmyadmin.domain.com; access_log /home/fanboy/logs/phpmyadmin.access_log; error_log /home/fanboy/logs/phpmyadmin.error_log; location / { root /usr/share/phpmyadmin; index index.php; } location ~ \.php$ { fastcgi_pass 127.0.0.1:8888; fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME /usr/share/phpmyadmin$fastcgi_script_name; include /usr/local/nginx/conf/fastcgi.conf; } }

Read the article

Redirect physical keyboard input to SSH

- by Dimme

I'm having a raspberry pi running debian linux and I have an RFID reader connected to it. The RFID reader behaves like a keyboard. Every time I scan a tag it types then number of the tag and then carriage return. My problem is that I want to redirect the output of the RFID reader to my SSH session. That means anything that is typed to the physical keyboard of the pi should be displayed in my SSH window. I have tried with: cat /dev/tty0 but it wont work because the user is not logged in. Is there a way to disable the login screen after the pi boots and then redirect all input through SSH?

Read the article

Input multiple file names in windows open file dialog box

- by goodiet

Windows 7 allows you to select multiple files to open at once by using ctrl or shift key. The "File Name" input field at the bottom of the dialog box would auto populate with the following sample: "aaa.txt" "bbb.txt" "ccc.txt" "ddd.txt" I have 14,000 files in a folder and I only need a range of files (approx 500). When I use the shift key to select a range of files, the "File Name" field auto populates all 500 file names. Windows would cut me off at the 260th character when I try to paste in a pre-generated string into the "File Name" field. Is there a way to bypass the 260 character limit so it would accept my entire string with 500 file names?

Read the article

"No input file specified" - unable to access phpMyAdmin using debian squeeze

- by guiltybyintent

I have installed phpMyAdmin on my VPS LAMP server (Debian Squeeze/Apache2/MySQL/PHP5), but am unable to access it: //my-ip/phpmyadmin/ and //my-domain/phpmyadmin/ both produce the following error message: "No input file specified". The phpMyAdmin FAQ identifies this as a permission problem, but the suggested solution seems not to apply to my situation. Every other solution I have come across involves removing/purging and reinstalling phpmyadmin - which I have done several times, always to the same result. Previous posts in this forum typically relate to Nginx, which I have not installed. Thanks in advance for any help!

Read the article

iptables to allow input and output traffic to and from web server only

- by Caedmon

I have an Elastic Search server which seems to have been exploited (it's being used for a DDoS attack having had NO firewall for about a month). As a temporary measure while I create a new one I was hoping to block all traffic to and from the server which wasn't coming from or going to our web server. Will these iptables rules achieve this: iptables -I INPUT \! --src 1.2.3.4 -m tcp -p tcp --dport 9200 -j DROP iptables -P FORWARD \! --src 1.2.3.4 DROP iptables -P OUTPUT \! --src 1.2.3.4 DROP The first rule is tried and tested but obviously wasn't preventing traffic coming from my server to other IP addresses so I was hoping I could add the second two rules to full secure it.

Read the article

VMWare Input/Output error on ubuntu host Win7 guest

- by CShipley

I am running ubuntu 10.10 as my host with Windows 7 as the guest. About a couple weeks ago I started getting error pop-ups from vmware reporting inability to read or write to a particular file. On futher investigation, I've noticed that I cannot copy that particular file from the linux command line even as root. I get the same input/output error. The SMART utility tells me I have 69 bad sectors on the disk (it is 1 TB) So my question is 1) How do I tell if that HD is going bad? 2) How can I move the VM files to a different part of the disk if I get read/write errors when I try to copy?

Read the article

VMWare Input/Output error on ubuntu host Win7 guest

- by CShipley

I am running ubuntu 10.10 as my host with Windows 7 as the guest. About a couple weeks ago I started getting error pop-ups from vmware reporting inability to read or write to a particular file. On futher investigation, I've noticed that I cannot copy that particular file from the linux command line even as root. I get the same input/output error. The SMART utility tells me I have 69 bad sectors on the disk (it is 1 TB) So my question is 1) How do I tell if that HD is going bad? 2) How can I move the VM files to a different part of the disk if I get read/write errors when I try to copy?

Read the article

iptables not allowing mysql connections to aliased ips?

- by Curtis

I have a fairly simple iptables firewall on a server that provides MySQL services, but iptables seems to be giving me very inconsistent results. The default policy on the script is as follows: iptables -P INPUT DROP I can then make MySQL public with the following rule: iptables -A INPUT -p tcp --dport 3306 -j ACCEPT With this rule in place, I can connect to MySQL from any source IP to any destination IP on the server without a problem. However, when I try to restrict access to just three IPs by replacing the above line with the following, I run into trouble (xxx=masked octect): iptables -A INPUT -p tcp --dport 3306 -m state --state NEW -s 208.XXX.XXX.184 -j ACCEPT iptables -A INPUT -p tcp --dport 3306 -m state --state NEW -s 208.XXX.XXX.196 -j ACCEPT iptables -A INPUT -p tcp --dport 3306 -m state --state NEW -s 208.XXX.XXX.251 -j ACCEPT Once the above rules are in place, the following happens: I can connect to the MySQL server from the .184, .196 and .251 hosts just fine as long as am connecting to the MySQL server using it's default IP address or an IP alias in the same subnet as the default IP address. I am unable to connect to MySQL using IP aliases that are assigned to the server from a different subnet than the server's default IP when I'm coming from the .184 or .196 hosts, but .251 works just fine. From the .184 or .196 hosts, a telnet attempt just hangs... # telnet 209.xxx.xxx.22 3306 Trying 209.xxx.xxx.22... If I remove the .251 line (making .196 the last rule added), the .196 host still can not connect to MySQL using IP aliases (so it's not the order of the rules that is causing the inconsistent behavior). I know, this particular test was silly as it shouldn't matter what order these three rules are added in, but I figured someone might ask. If I switch back to the "public" rule, all hosts can connect to the MySQL server using either the default or aliased IPs (in either subnet): iptables -A INPUT -p tcp --dport 3306 -j ACCEPT The server is running in a CentOS 5.4 OpenVZ/Proxmox container (2.6.32-4-pve). And, just in case you prefer to see the problem rules in the context of the iptables script, here it is (xxx=masked octect): # Flush old rules, old custom tables /sbin/iptables --flush /sbin/iptables --delete-chain # Set default policies for all three default chains /sbin/iptables -P INPUT DROP /sbin/iptables -P FORWARD DROP /sbin/iptables -P OUTPUT ACCEPT # Enable free use of loopback interfaces /sbin/iptables -A INPUT -i lo -j ACCEPT /sbin/iptables -A OUTPUT -o lo -j ACCEPT # All TCP sessions should begin with SYN /sbin/iptables -A INPUT -p tcp ! --syn -m state --state NEW -j DROP # Accept inbound TCP packets (Do this *before* adding the 'blocked' chain) /sbin/iptables -A INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT # Allow the server's own IP to connect to itself /sbin/iptables -A INPUT -i eth0 -s 208.xxx.xxx.178 -j ACCEPT # Add the 'blocked' chain *after* we've accepted established/related connections # so we remain efficient and only evaluate new/inbound connections /sbin/iptables -N BLOCKED /sbin/iptables -A INPUT -j BLOCKED # Accept inbound ICMP messages /sbin/iptables -A INPUT -p ICMP --icmp-type 8 -j ACCEPT /sbin/iptables -A INPUT -p ICMP --icmp-type 11 -j ACCEPT # ssh (private) /sbin/iptables -A INPUT -p tcp --dport 22 -m state --state NEW -s xxx.xxx.xxx.xxx -j ACCEPT # ftp (private) /sbin/iptables -A INPUT -p tcp --dport 21 -m state --state NEW -s xxx.xxx.xxx.xxx -j ACCEPT # www (public) /sbin/iptables -A INPUT -p tcp --dport 80 -j ACCEPT /sbin/iptables -A INPUT -p tcp --dport 443 -j ACCEPT # smtp (public) /sbin/iptables -A INPUT -p tcp --dport 25 -j ACCEPT /sbin/iptables -A INPUT -p tcp --dport 2525 -j ACCEPT # pop (public) /sbin/iptables -A INPUT -p tcp --dport 110 -j ACCEPT # mysql (private) /sbin/iptables -A INPUT -p tcp --dport 3306 -m state --state NEW -s 208.xxx.xxx.184 -j ACCEPT /sbin/iptables -A INPUT -p tcp --dport 3306 -m state --state NEW -s 208.xxx.xxx.196 -j ACCEPT /sbin/iptables -A INPUT -p tcp --dport 3306 -m state --state NEW -s 208.xxx.xxx.251 -j ACCEPT Any ideas? Thanks in advance. :-)

Read the article

copying link id to an input field

- by zurna

The code works fine when links are images. But I have a problem when there are flash movies. Another page opens with undefined in the address bar when it needs to copy the link id to imagesID input box. <script type="text/javascript"> var $input = $("#imagesID"); // <-- your input field $('a.thumb').click(function() { var value = $input.val(); var id = $(this).attr('id'); if (value.match(id)) { value = value.replace(id + ';', ''); } else { value += id + ';'; } $input.val(value); }); </script> <ul class="thumbs"> <li> <a class="thumb" id="62"> <img src="/FLPM/media/images/2A9L1V2X_sm.jpg" alt="Dock" id="62" class="floatLeft" /> </a> <br /> <a href="?Process=&IMAGEID=62" class="thumb"><span class="floatLeft">DELETE</span></a> </li> <li> <a class="thumb" id="61"> <img src="/FLPM/media/images/0E7Q9Z0C_sm.jpg" alt="Desert Landscape" id="61" class="floatLeft" /> </a> <br /> <a href="?Process=&IMAGEID=61" class="thumb"><span class="floatLeft">DELETE</span></a> </li> <li> <a class="thumb" id="60"> <img src="/FLPM/media/images/8R5D7M8O_sm.jpg" alt="Creek" id="60" class="floatLeft" /> </a> <br /> <a href="?Process=&IMAGEID=60" class="thumb"><span class="floatLeft">DELETE</span></a> </li> <li> <a class="thumb" id="59"> <object classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000" codebase="http://active.macromedia.com/flash4/cabs/swflash.cab#version=4,0,0,0" id="59" width="150" height="100" style="float:left; border:5px solid #CCCCCC; margin:5px 10px 10px 0;"> <param name="scale" value="exactfit"> <param name="AllowScriptAccess" value="always" /> <embed name="name" src="http://www.refinethetaste.com/FLPM/media/flashes/7P4A6K7M.swf" quality="high" scale="exactfit" width="150" height="100" type="application/x-shockwave-flash" AllowScriptAccess="always" pluginspage="http://www.macromedia.com/shockwave/download/index.cgi? P1_Prod_Version=ShockwaveFlash"> </embed> </object> </a> <br /> <a href="?Process=&IMAGEID=59" class="thumb"><span class="floatLeft">DELETE</span></a> </li> </ul>

Read the article

Java ME scorecard with vector and multiple input fields/screens

- by proximity

I have made a scorecard with 5 holes, for each a input field (shots), and a image is shown. The input should be saved into a vector and shown on each hole, eg. hole 2: enter shots, underneath it "total shots: 4" (if you have made 4 shots on hole 1). In the end I would need a sum up of all shots, eg. Hole 1: 4 Hole 2: 3 Hole 3: 2 ... Total: 17 Could someone please help me with this task? { f = new Form("Scorecard"); d = Display.getDisplay(this); mTextField = new TextField("Shots:", "", 2, TextField.NUMERIC); f.append(mTextField); mStatus = new StringItem("Hole 1:", "Par 3, 480m"); f.append(mStatus); try { Image j = Image.createImage("/hole1.png"); ImageItem ii = new ImageItem("", j, 3, "Hole 1"); f.append(ii); } catch (java.io.IOException ioe) {} catch (Exception e) {} f.addCommand(mBackCommand); f.addCommand(mNextCommand); f.addCommand(mExitCommand); f.setCommandListener(this); Display.getDisplay(this).setCurrent(f); } public void startApp() { mBackCommand = new Command("Back", Command.BACK, 0); mNextCommand = new Command("Next", Command.OK, 1); mExitCommand = new Command("Exit", Command.EXIT, 2); } public void pauseApp() { } public void destroyApp(boolean unconditional) { } public void commandAction(Command c, Displayable d) { if (c == mExitCommand) { destroyApp(true); notifyDestroyed(); } else if ( c == mNextCommand) { // -> go to next hole input! save the mTextField input into a vector. } } } ------------------------------ Full code --------------------------------- import java.util.; import javax.microedition.midlet.; import javax.microedition.lcdui.*; public class ScorerMIDlet extends MIDlet implements CommandListener { private Command mExitCommand, mBackCommand, mNextCommand; private Display d; private Form f; private TextField mTextField; private Alert a; private StringItem mHole1; private int b; // repeat holeForm for all five holes and add the input into a vector or array. Display the values in the end after asking for todays date and put todays date in top of the list. Make it possible to go back in the form, eg. hole 3 - hole 2 - hole 1 public void holeForm(int b) { f = new Form("Scorecard"); d = Display.getDisplay(this); mTextField = new TextField("Shots:", "", 2, TextField.NUMERIC); f.append(mTextField); mHole1 = new StringItem("Hole 1:", "Par 5, 480m"); f.append(mHole1); try { Image j = Image.createImage("/hole1.png"); ImageItem ii = new ImageItem("", j, 3, "Hole 1"); f.append(ii); } catch (java.io.IOException ioe) {} catch (Exception e) {} // Set date&time in the end long now = System.currentTimeMillis(); DateField df = new DateField("Playing date:", DateField.DATE_TIME); df.setDate(new Date(now)); f.append(df); f.addCommand(mBackCommand); f.addCommand(mNextCommand); f.addCommand(mExitCommand); f.setCommandListener(this); Display.getDisplay(this).setCurrent(f); } public void startApp() { mBackCommand = new Command("Back", Command.BACK, 0); mNextCommand = new Command("OK-Next", Command.OK, 1); mExitCommand = new Command("Exit", Command.EXIT, 2); b = 0; holeForm(b); } public void pauseApp() {} public void destroyApp(boolean unconditional) {} public void commandAction(Command c, Displayable d) { if (c == mExitCommand) { destroyApp(true); notifyDestroyed(); } else if ( c == mNextCommand) { holeForm(b); } } }

Read the article

How to manually check a YUI radio "button".

- by alex

Read the article

python raw_input odd behavior with accents containing strings

- by Ryan

I'm writing a program that asks the user for input that contains accents. The user input string is tested to see if it matches a string declared in the program. As you can see below, my code is not working: code # -*- coding: utf-8 -*- testList = ['má'] myInput = raw_input('enter something here: ') print myInput, repr(myInput) print testList[0], repr(testList[0]) print myInput in testList output in eclipse with pydev enter something here: má mv° 'm\xe2\x88\x9a\xc2\xb0' má 'm\xc3\xa1' False output in IDLE enter something here: má má u'm\xe1' má 'm\xc3\xa1' Warning (from warnings module): File "/Users/ryanculkin/Desktop/delete.py", line 8 print myInput in testList UnicodeWarning: Unicode equal comparison failed to convert both arguments to Unicode - interpreting them as being unequal False How can I get my code to print True when comparing the two strings? Additionally, I note that the result of running this code on the same input is different depending on whether I use eclipse or IDLE. Why is this? My eventual goal is to put my program on the web; is there anything that I need to be aware of, since the result seems to be so volatile?

Read the article

Facelet does not convert formatted currency correctly

- by c0d3x

Hi, I have the follwing code inside a facelet page: <h:inputNumber value="bean.property"> <f:convertNumber type="currency" /> </h:inputNumber The converter is because there can be a kind of default value inside the input field, which comes from the bean property. Everything is rendered correctly. The value inside the input field is rendered with an "€" character (e.g. "1.453 €". When I submit the form there comes an error up: "nameOfInputField" konnte nicht als ein Geldbetrag erkannt werden '304,00 â¬' In english it is some like: "nameOfInputField" could not be regognized as an amount of money '304,00 â¬' Please have a look at the "€" character. It seems to be printed as "â¬". While it was rendered correctly before submitting the form, now it looks like "â¬" inside the error message and inside the input field. All pages are encoded in UTF-8. What is the reason for this error? How can fix it? Thanks in advance

Read the article

iptables: allowing incoming for 192.168.1.0/24 allowed incoming for all?

- by nortally

The internal side of my ISP router has three devices: ISP router 128.128.43.1 Firewall router 128.128.43.2 Server 128.128.43.3 Behind the Firewall router is a NAT network using 192.168.100.n/24 This question is regarding iptables running on the Server. I wanted to allow access to port 8080 only from the NAT clients behind the Firewall router, so I used this rule -A Firewall-1-INPUT -s 192.168.100.0/24 -m state --state NEW -m tcp -p tcp --dport 8080 -j ACCEPT This worked, but UNEXPECTEDLY ALLOWED GLOBAL ACCESS, which resulted in our JBOSS server getting compromised. I now know that the correct rule is to use the Firewall router's address instead of the internal network, but can anyone explain why the first rule allowed global access? I would have expected it to just fail. Full config, mostly lifted from a RedHat server: *filter :INPUT ACCEPT [0:0] :FORWARD ACCEPT [0:0] :OUTPUT ACCEPT [0:0] :Firewall-1-INPUT - [0:0] -A INPUT -j Firewall-1-INPUT -A FORWARD -j Firewall-1-INPUT -A Firewall-1-INPUT -i lo -j ACCEPT -A Firewall-1-INPUT -p icmp --icmp-type any -j ACCEPT -A Firewall-1-INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT -A Firewall-1-INPUT -m comment --comment "allow ssh from all" -A Firewall-1-INPUT -m state --state NEW -m tcp -p tcp --dport 22 -j ACCEPT -A Firewall-1-INPUT -m comment --comment "allow https from all" -A Firewall-1-INPUT -m state --state NEW -m tcp -p tcp --dport 443 -j ACCEPT -A Firewall-1-INPUT -m comment --comment "allow JBOSS from Firewall" ### THIS RESULTED IN GLOBAL ACCESS TO PORT 8080 ### -A Firewall-1-INPUT -s 192.168.100.0/24 -m state --state NEW -m tcp -p tcp --dport 8080 -j ACCEPT ### THIS WORKED -A Firewall-1-INPUT -s 128.128.43.2 -m state --state NEW -m tcp -p tcp --dport 8080 -j ACCEPt ### -A Firewall-1-INPUT -j REJECT --reject-with icmp-host-prohibited COMMIT

Read the article

Have an Input/output error when connecting to a server via ssh

- by Shehzad009

Hello I seem to be having a problem while connecting to a Ubuntu Server while connecting via ssh. When I login, I get this error. Could not chdir to home directory /home/username: Input/output error It seems like my home folder is corrupt or something. I cannot ls in the home folder directory, and in my usename directory, I can't cd into this. As root I cannot ls in the home directory as well or in any directory in Home. I notice as well when I save in vim or quit, it get this error at the bottom of the page E138: Cannot write viminfo file /home/root/.viminfo! Any ideas? EDIT: this is what happens if I type in these commands mount proc on /proc type proc (rw,noexec,nosuid,nodev) none on /sys type sysfs (rw,noexec,nosuid,nodev) fusectl on /sys/fs/fuse/connections type fusectl (rw) none on /sys/kernel/debug type debugfs (rw) none on /sys/kernel/security type securityfs (rw) none on /dev type devtmpfs (rw,mode=0755) none on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620) none on /dev/shm type tmpfs (rw,nosuid,nodev) none on /var/run type tmpfs (rw,nosuid,mode=0755) none on /var/lock type tmpfs (rw,noexec,nosuid,nodev) /dev/mapper/RAID1-lvvar on /var type xfs (rw) /dev/mapper/RAID5-lvsrv on /srv type xfs (rw) /dev/mapper/RAID5-lvhome on /home type xfs (rw) /dev/mapper/RAID1-lvtmp on /tmp type reiserfs (rw) dmesg | tail [1213273.364040] Filesystem "dm-3": xfs_log_force: error 5 returned. [1213274.084081] Filesystem "dm-4": xfs_log_force: error 5 returned. [1213309.364038] Filesystem "dm-3": xfs_log_force: error 5 returned. [1213310.084041] Filesystem "dm-4": xfs_log_force: error 5 returned. [1213345.364039] Filesystem "dm-3": xfs_log_force: error 5 returned. [1213346.084042] Filesystem "dm-4": xfs_log_force: error 5 returned. [1213381.365036] Filesystem "dm-3": xfs_log_force: error 5 returned. [1213382.084047] Filesystem "dm-4": xfs_log_force: error 5 returned. [1213417.364039] Filesystem "dm-3": xfs_log_force: error 5 returned. [1213418.084063] Filesystem "dm-4": xfs_log_force: error 5 returned. fdisk -l /dev/sda Cannot open /dev/sda

Read the article

Excel Help: Data Input Help

- by B-Ballerl

Everyday I download data from a site that will have rows each filled with individual data for clients. I'm able to input the data into excel as a whole but after that I'm having trouble figuring out how to put it into a chart. For example Web visits time. So say Client 1 stayed for 5 min increasing his total time on the site to 20 min and Client 2 stayed for 0 min keeping his time of 10 min and they were both registered on new years eve, and R1's last login was today and R2's was yesterday. (R for some reason repersents Client, no idea why...). Client 3 hasn't been on since he registered keeping his total at 4 min So my data would look something like this for Today (20110104) R1,20101231,20110104,20 R2,20101231,20110103,10 R3,20101231,20101231,4 And this for the day before (201101030), R1,20101231,20110102,15 R2,20101231,20110103,10 R3,20101231,20101231,4 I get about 200+ client rows each day where even the names of the Client list are changing. Is it possible to import the data each day and fill it in a excel sheet where the Client number is off on the left hand side in a table, and the amount of time (Whole Number ex. 4) each day it spends on the site extend to the right under it's specific date see Picture? I've manage to create a manual sheet but have been unsucessful at getting excel to do any of it for me. Here are two pictures:

Read the article

mount error 5 = Input/output error

- by alharaka

I am running out of ideas. After a long period of testing this morning, I cannot seem to get this to work, and I have no idea why. I want to mount a Windows SMB/CIFS share with a Debian 5.0.4 VM, and it is not cooperating. This the command I am using. debianvm:/home/me# whoami root debianvm:/home/me# smbclient --version Version 3.2.5 debianvm:/home/me# mount -t cifs //hostname.domain.tld/share /mnt/hostname.domain.tld/share --verbose -o user=SUBADDOMAIN.ADDOMAIN.DOMAIN.TLD/username mount.cifs kernel mount options: unc=//hostname.domain.tld\share,ip=10.212.15.53,domain=SUBADDOMAIN.ADDOMAIN.DOMAIN.TLD,ver=1,rw,user=username,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,pass=*********mount error 5 = Input/output error Refer to the mount.cifs(8) manual page (e.g.man mount.cifs) debianvm:/home/me# The word on the nets has not been very specific, and unfortunately it is almost always environment-specific. I receive no authentication errors. I have tried mount -t smbfs and mount -t cifs, along with smbmount and such. I get the same error before. I doubt it is a problem with DNS resolution, because logging shows the correct IP address. dmesg | tail -f no longer shows authentication errors when I format the domain and username accordingly. I have played a little with iocharset=utf8, file_mode, and dir_mode as described here. That did not help either. I have also tried ntlm and ntlmv2 assuming it might be a minimum auth method problem, but not forcing sec=ntlmv2 it can still authenticate without errors anymore. smbclient -L hostname.domain.tld -W SUBADDOMAIN.ADDOMAIN.DOMAIN.TLD -U username correctly lists all the shares and shows it as the following. Domain=[SUBADDOMAIN] OS=[Windows 5.0] Server=[Windows 2000 LAN Manager] Sharename Type Comment --------- ---- ------- IPC$ IPC Remote IPC ETC$ Disk Remote Administration C$ Disk Remote Administration Share Disk Connection to hostname.domain.tld failed (Error NT_STATUS_CONNECTION_REFUSED) NetBIOS over TCP disabled -- no workgroup available I find the last line intriguing/alarming. Does anyone have any pointers!? Maybe I misread the effin manual.

Read the article

Blocking an IP in Webmin

- by Dan J

I've been checking my /var/log/secure log recently and have seen the same bot trying to brute force onto my Centos server running webmin. I created a chain + rule in Networking - Linux Firewall: Drop If source is 113.106.88.146 But I'm still seeing the attempted logins in the log: Jun 6 10:52:18 CentOS5 sshd[9711]: pam_unix(sshd:auth): check pass; user unknown Jun 6 10:52:18 CentOS5 sshd[9711]: pam_succeed_if(sshd:auth): error retrieving information about user larry Jun 6 10:52:19 CentOS5 sshd[9711]: Failed password for invalid user larry from 113.106.88.146 port 49328 ssh2 Here is the contents of /etc/sysconfig/iptables: # Generated by webmin *filter :banned-ips - [0:0] -A INPUT -p udp -m udp --dport ftp-data -j ACCEPT -A INPUT -p udp -m udp --dport ftp -j ACCEPT -A INPUT -p udp -m udp --dport domain -j ACCEPT -A INPUT -p tcp -m tcp --dport 20000 -j ACCEPT -A INPUT -p tcp -m tcp --dport 10000 -j ACCEPT -A INPUT -p tcp -m tcp --dport https -j ACCEPT -A INPUT -p tcp -m tcp --dport http -j ACCEPT -A INPUT -p tcp -m tcp --dport imaps -j ACCEPT -A INPUT -p tcp -m tcp --dport imap -j ACCEPT -A INPUT -p tcp -m tcp --dport pop3s -j ACCEPT -A INPUT -p tcp -m tcp --dport pop3 -j ACCEPT -A INPUT -p tcp -m tcp --dport ftp-data -j ACCEPT -A INPUT -p tcp -m tcp --dport ftp -j ACCEPT -A INPUT -p tcp -m tcp --dport domain -j ACCEPT -A INPUT -p tcp -m tcp --dport smtp -j ACCEPT -A INPUT -p tcp -m tcp --dport ssh -j ACCEPT -A banned-ips -s 113.106.88.146 -j DROP COMMIT # Completed # Generated by webmin *mangle :FORWARD ACCEPT [0:0] :INPUT ACCEPT [0:0] :OUTPUT ACCEPT [0:0] :PREROUTING ACCEPT [0:0] :POSTROUTING ACCEPT [0:0] COMMIT # Completed # Generated by webmin *nat :OUTPUT ACCEPT [0:0] :PREROUTING ACCEPT [0:0] :POSTROUTING ACCEPT [0:0] COMMIT # Completed

Read the article

Problems forwarding port 3306 on iptables with CentOS

- by BoDiE2003

Im trying to add a forward to the mysql server at 200.58.126.52 to allow the access from 200.58.125.39, and Im using the following rules (its my whole iptables of the VPS of my hosting). I can connect locally at the server that holds the mysql service as localhost, but not from outside. Can someone check if the following rules are fine? Thank you # Firewall configuration written by system-config-securitylevel # Manual customization of this file is not recommended. *filter :INPUT ACCEPT [0:0] :FORWARD ACCEPT [0:0] :OUTPUT ACCEPT [0:0] :RH-Firewall-1-INPUT - [0:0] -A INPUT -j RH-Firewall-1-INPUT -A FORWARD -j RH-Firewall-1-INPUT -A RH-Firewall-1-INPUT -i lo -j ACCEPT -A RH-Firewall-1-INPUT -p icmp --icmp-type any -j ACCEPT -A RH-Firewall-1-INPUT -p 50 -j ACCEPT -A RH-Firewall-1-INPUT -p 51 -j ACCEPT -A RH-Firewall-1-INPUT -p udp --dport 5353 -d 224.0.0.251 -j ACCEPT -A RH-Firewall-1-INPUT -p udp -m udp --dport 631 -j ACCEPT -A RH-Firewall-1-INPUT -p tcp -m tcp --dport 631 -j ACCEPT -A RH-Firewall-1-INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT -A RH-Firewall-1-INPUT -m state --state NEW -m tcp -p tcp --dport 22 -j ACCEPT -A RH-Firewall-1-INPUT -j REJECT --reject-with icmp-host-prohibited -A RH-Firewall-1-INPUT -m state --state NEW -m tcp -p tcp -s 200.58.125.39 --dport 3306 -j ACCEPT -A INPUT -p tcp -s 200.58.125.39 --sport 1024:65535 -d localhost --dport 3306 -m state --state NEW,ESTABLISHED -j ACCEPT -A OUTPUT -p tcp -s localhost --sport 3306 -d 200.58.125.39 --dport 1024:65535 -m state --state ESTABLISHED -j ACCEPT COMMIT And this is the output of the connection trial. [root@qwhosti /home/qwhosti/public_html/admin/config] # mysql -u user_db -p -h 200.58.126.52 Enter password: ERROR 2003 (HY000): Can't connect to MySQL server on '200.58.126.52' (113)

Read the article

Bonnie does not provide speed for Sequential Input / Block

- by Lqp1

I'm using ProxmoxVE and I would like to run some benchmarks regarding performances of this product. One of these benchmarks is bonnie++ ; it runs very well in a VM (qemu-kvm) but when I run it in a conainer (openVZ), it does not provide me reading speed (only writing). I don't understand why... Does anyone know what's happenning ? VMs ans Containers are Debian 7.4. Here's the output of bonnie in the container: root@ct2:/# bonnie++ -u root Using uid:0, gid:0. Writing a byte at a time...done Writing intelligently...done Rewriting...done Reading a byte at a time...done Reading intelligently...done start 'em...done...done...done...done...done... Create files in sequential order...done. Stat files in sequential order...done. Delete files in sequential order...done. Create files in random order...done. Stat files in random order...done. Delete files in random order...done. Version 1.96 ------Sequential Output------ --Sequential Input- --Random- Concurrency 1 -Per Chr- --Block-- -Rewrite- -Per Chr- --Block-- --Seeks-- Machine Size K/sec %CP K/sec %CP K/sec %CP K/sec %CP K/sec %CP /sec %CP ct2 1G 843 99 59116 8 60351 4 4966 99 +++++ +++ 2745 8 Latency 9558us 3582ms 527ms 1672us 936us 5248us Version 1.96 ------Sequential Create------ --------Random Create-------- ct2 -Create-- --Read--- -Delete-- -Create-- --Read--- -Delete-- files /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP 16 +++++ +++ +++++ +++ +++++ +++ +++++ +++ +++++ +++ +++++ +++ Latency 19567us 358us 368us 107us 59us 25us 1.96,1.96,ct2,1,1401810323,1G,,843,99,59116,8,60351,4,4966,99,+++++,+++,2745,8,16,,,,,+++++,+++,+++++,+++,+++++,+++,+++++,+++,+++++,+++,+++++,+++,9558us,3582ms,527ms,1672us,936us,5248us,19567us,358us,368us,107us,59us,25us The filesystem for / is of type "simfs", which is a pseudo filesystem for openVZ. Maybe it's related to this issue but I can't find anyone with the same issue with bonnie and openVZ... Thanks for your help. Regards, Thomas.

Read the article

Input/output error reading USB backup drive on CentOS 6.4

- by Kev

I'm suddenly seeing some strange behaviour on our USB backup drive that doesn't make sense to me: (2013-10-21 14:58:23 [root@newdc /]$ cd /mnt/backup/ (2013-10-21 14:59:03 [root@newdc backup]$ ls -la ls: reading directory .: Input/output error total 0 (2013-10-21 14:59:05 [root@newdc backup]$ df -h /mnt/backup Filesystem Size Used Avail Use% Mounted on /dev/sda1 917G 843G 28G 97% /mnt/backup How is it possible for the OS to know how much is in use, but I can't ls any of it as root? Or more to the point, what problem does this indicate? /var/log/messages said this: Oct 21 14:57:54 g5 kernel: EXT4-fs error (device sda1): ext4_journal_start_sb: Detected aborted journal Oct 21 14:57:54 g5 kernel: EXT4-fs (sda1): Remounting filesystem read-only But...read-only is something different than 'throw an io error'... After unmounting to try fsck on it, I had someone on-site look at it, and the drive was not spun up, and had a slow-flashing light, which I believe means it was in a power-suspend mode. So I had them unplug and replug the USB cable, and now (before remounting) it says: fsck from util-linux-ng 2.17.2 e2fsck 1.41.12 (17-May-2010) /dev/sda1: clean, 2805106/61046784 files, 181934167/244182016 blocks I then mount it and now ls works and df reports: Filesystem Size Used Avail Use% Mounted on /dev/sda1 917G 680G 191G 79% /mnt/backup What would cause it to go into such a state without being asked to? Why all the weird behaviour, and now it appears to not be corrupt?

Read the article

Ubuntu 12.04 LXC nat prerouting not working

- by petermolnar

I have a running Debian Wheezy setup I copied exactly to an Ubuntu 12.04 ( elementary OS, used as desktop as well ) While the Debian setup runs flawlessly, the Ubuntu version dies on the prerouting to containers ( or so it seems ) In short: lxc works containers work and run connecting to container from host OK ( including mixed ports & services ) connecting to outside world from container is fine What does not work is connecting from another box to the host on a port that should be NATed to a container. The setups: /etc/rc.local CMD_BRCTL=/sbin/brctl CMD_IFCONFIG=/sbin/ifconfig CMD_IPTABLES=/sbin/iptables CMD_ROUTE=/sbin/route NETWORK_BRIDGE_DEVICE_NAT=lxc-bridge HOST_NETDEVICE=eth0 PRIVATE_GW_NAT=192.168.42.1 PRIVATE_NETMASK=255.255.255.0 PUBLIC_IP=192.168.13.100 ${CMD_BRCTL} addbr ${NETWORK_BRIDGE_DEVICE_NAT} ${CMD_BRCTL} setfd ${NETWORK_BRIDGE_DEVICE_NAT} 0 ${CMD_IFCONFIG} ${NETWORK_BRIDGE_DEVICE_NAT} ${PRIVATE_GW_NAT} netmask ${PRIVATE_NETMASK} promisc up Therefore lxc network is 192.168.42.0/24 and the host eth0 ip is 192.168.13.100; setup via network manager as static address. iptables: *mangle :PREROUTING ACCEPT [0:0] :INPUT ACCEPT [0:0] :FORWARD ACCEPT [0:0] :OUTPUT ACCEPT [0:0] :POSTROUTING ACCEPT [0:0] COMMIT *filter :FORWARD ACCEPT [0:0] :INPUT DROP [0:0] :OUTPUT ACCEPT [0:0] # Accept traffic from internal interfaces -A INPUT -i lo -j ACCEPT # accept traffic from lxc network -A INPUT -d 192.168.42.1 -s 192.168.42.0/24 -j ACCEPT # Accept internal traffic Make sure NEW incoming tcp connections are SYN # packets; otherwise we need to drop them: -A INPUT -p tcp ! --syn -m state --state NEW -j DROP # Packets with incoming fragments drop them. This attack result into Linux server panic such data loss. -A INPUT -f -j DROP # Incoming malformed XMAS packets drop them: -A INPUT -p tcp --tcp-flags ALL ALL -j DROP # Incoming malformed NULL packets: -A INPUT -p tcp --tcp-flags ALL NONE -j DROP # Accept traffic with the ACK flag set -A INPUT -p tcp -m tcp --tcp-flags ACK ACK -j ACCEPT # Allow incoming data that is part of a connection we established -A INPUT -m state --state ESTABLISHED -j ACCEPT # Allow data that is related to existing connections -A INPUT -m state --state RELATED -j ACCEPT # Accept responses to DNS queries -A INPUT -p udp -m udp --dport 1024:65535 --sport 53 -j ACCEPT # Accept responses to our pings -A INPUT -p icmp -m icmp --icmp-type echo-reply -j ACCEPT # Accept notifications of unreachable hosts -A INPUT -p icmp -m icmp --icmp-type destination-unreachable -j ACCEPT # Accept notifications to reduce sending speed -A INPUT -p icmp -m icmp --icmp-type source-quench -j ACCEPT # Accept notifications of lost packets -A INPUT -p icmp -m icmp --icmp-type time-exceeded -j ACCEPT # Accept notifications of protocol problems -A INPUT -p icmp -m icmp --icmp-type parameter-problem -j ACCEPT # Respond to pings, but limit -A INPUT -m icmp -p icmp --icmp-type echo-request -m state --state NEW -m limit --limit 6/s -j ACCEPT # Allow connections to SSH server -A INPUT -p tcp -m tcp --dport 22 -m state --state NEW -m limit --limit 12/s -j ACCEPT COMMIT *nat :OUTPUT ACCEPT [0:0] :PREROUTING ACCEPT [0:0] :POSTROUTING ACCEPT [0:0] -A PREROUTING -d 192.168.13.100 -p tcp -m tcp --dport 2221 -m state --state NEW -m limit --limit 12/s -j DNAT --to-destination 192.168.42.11:22 -A PREROUTING -d 192.168.13.100 -p tcp -m tcp --dport 80 -m state --state NEW -m limit --limit 512/s -j DNAT --to-destination 192.168.42.11:80 -A PREROUTING -d 192.168.13.100 -p tcp -m tcp --dport 443 -m state --state NEW -m limit --limit 512/s -j DNAT --to-destination 192.168.42.11:443 -A POSTROUTING -d 192.168.42.0/24 -o eth0 -j SNAT --to-source 192.168.13.100 -A POSTROUTING -o eth0 -j MASQUERADE COMMIT sysctl: net.ipv4.conf.all.forwarding = 1 net.ipv4.conf.all.mc_forwarding = 0 net.ipv4.conf.default.forwarding = 1 net.ipv4.conf.default.mc_forwarding = 0 net.ipv4.ip_forward = 1 I've set up full iptables log on the container; none of the packets addressed to 192.168.13.100, port 80 is reaching the container. I've even tried different kernels ( server kernel, raring lts kernel, etc ), modprobe everything iptables & nat related, nothing. Any ideas?

Search Results

Search found 17209 results on 689 pages for 'input sanitization'.

Page 38/689 | < Previous Page | 34 35 36 37 38 39 40 41 42 43 44 45 | Next Page >

- by Howard

- by llirik42

- by Drew

- by user66700

- by Dimme

- by goodiet

- by guiltybyintent

- by Caedmon

- by CShipley

- by CShipley

- by Curtis

- by zurna

- by proximity

- by alex

- by Ryan

- by c0d3x

- by nortally

- by Shehzad009

- by B-Ballerl

- by alharaka

- by Dan J

- by BoDiE2003

- by Lqp1

- by Kev

- by petermolnar

< Previous Page | 34 35 36 37 38 39 40 41 42 43 44 45 | Next Page >