Search Results

Search found 21004 results on 841 pages for 'load assembly'.

Page 38/841 | < Previous Page | 34 35 36 37 38 39 40 41 42 43 44 45  | Next Page >

• UEFI/GPT Win 7 Load Failure in Dual Boot and no GRUB2 [Ubuntu 12.04]

  - by cristian_jordache

  Configuration: MBB: ASRock X79 Extreme6 Win 7 installed on a INTEL 40GB SSD (GPT partitioned) Ubuntu 14.04 on a CORSAIR 30GB SSD (Ext4 and SWAP) I had Windows 7 installed previously in UEFI mode, using 3 partitions (GPT) and works fine if left alone. In UEFI BIOS settings I can see sometimes a "Windows Boot Manager" and other times (?) a "UEFI Intel" entry for INTEL HDD and Windows will boot properly selecting the one available at that time. I installed Ubuntu 14.04 after Win 7 w/o changing any UEFI BIOS settings and it works fine only if the BIOS is set w/ the Ubuntu partition as the first drive to boot, in AHCI mode. If both SSD drives are connected, the Win7 Intel boot drive can be chosen as first boot device but only as an "AHCI Intel drive" (No "Windows Boot Manager" nor "UEFI Intel device" options available in BIOS Boot menu) and Win7 will not load properly as long as the Ubuntu Crucial SSD is NOT PHYSICALLY DISCONNECTED. Windows will try, start booting for few seconds but will fail replacing Win7 logo and that startup animation with w/ the "old" white progress bar and then and will notify that there is a issue and prompt the user to try to Load Win 7 in Normal Mode again or try a Recovery Mode to fix it. If I let Windows INTEL HDD boot via BIOS/UEFI - Windows Boot manager selection, I may see the purple screen of Grub2 loaded for a while, but there's no selection for Ubuntu or Windows and/or then machine is not booting, showing a black screen and a small command prompt cursor blinking on top. So far the only option I see to have Ubuntu boot side by side w/ Win 7 is to reformat the Win7 SDD and set it boot in legacy BIOS mode with a MBR instead of GPT. Per my understanding this is a quite complex issue to fix (Rod Smith's answer was pretty helpful: UEFI boot on my Asus k52f) but any other suggestions are welcome. I find a bit odd that I can boot properly Windows7 SSD or an Ubuntu DVD using a DVD drive set in UEFI-BIOS in "AHCI mode" and w/ using "UEFI/Windows Boot Manager" booting option but I cannot boot a secondary SSD-HDD w/ Ubuntu having the same BIOS/UEFI Boot configuration. Looks like plugging the second SSD [the Ubuntu partition] is interfering with boot options in UEFI-BIOS.

  Read the article

• Testing for Auto Save and Load Game

  - by David Dimalanta

  I'm trying to make a simple app that will test the save and load state. Is it a good idea to make an app that has an auto save and load game every time the newbies open the first app then continues it on the other day? I'm trying to make a simple app with a simple moving block sprite, starting at the center coordinate. Once I moved the sprite to the top by touch n' drag, I touch the back key to close the app. I expected that once I re-open the app and the block sprite is still at the top. But instead, it goes back to the center instead. Where can I find more ways to use the preferences or manipulating by telling the dispose method to dispose only specific wastes but not the important records (fastest time, last time where the sprite is located via coordinates, etc.). Is there really an easy way or it has no shortcuts but most effective way? I need help to expand more ideas. Thank you. Here are the following links that I'm trying to figure it out how to use them: http://www.youtube.com/watch?v=gER5GGQYzGc http://www.badlogicgames.com/wordpress/?p=1585 http://www.youtube.com/watch?v=t0PtLexfBCA&feature=relmfu Take note that these links above are codes. But I'm not looking answers for code but to look how to start or figure it out how to use them. Tell me if I'm wrong.

  Read the article

• Apache VERY high page load time

  - by Aaron Waller

  My Drupal 6 site has been running smoothly for years but recently has experienced intermittent periods of extreme slowness (10-60 sec page loads). Several hours of slowness followed by hours of normal (4-6 sec) page loads. The page always loads with no error, just sometimes takes forever. My setup: Windows Server 2003 Apache/2.2.15 (Win32) Jrun/4.0 PHP 5 MySql 5.1 Drupal 6 Cold fusion 9 Vmware virtual environment DMZ behind a corporate firewall Traffic: 1-3 hits/sec avg Troubleshooting No applicable errors in apache error log No errors in drupal event log Drupal devel module shows 242 queries in 366.23 milliseconds,page execution time 2069.62 ms. (So it looks like queries and php scripts are not the problem) NO unusually high CPU, memory, or disk IO Cold fusion apps, and other static pages outside of drupal also load slow webpagetest.org test shows very high time-to-first-byte The problem seems to be with Apache responding to requests, but previously I've only seen this behavior under 100% cpu load. Judging solely by resource monitoring, it looks as though very little is going on. Here is the kicker - roughly half of the site's access comes from our LAN, but if I disable the firewall rule and block access from outside of our network, internal (LAN) access (1000+ devices) is speedy. But as soon as outside access is restored the site is crippled. Apache config? Crawlers/bots? Attackers? I'm at the end of my rope, where should I be looking to determine where the problem lies?

  Read the article

• How to get a Sun Ray to load a firmware from elsewhere

  - by vdiozguy

  I run a Sun Ray/VDI demo environment internally within the company - and because it's not a public service, I need to tell my Sun Rays to connect to it directly so that I don't get redirected to the corporate servers. To get any new Sun Ray to connect to *my* setup I usually pull out my laptop so that the Sun Ray can load the new version of the F/W along with the permission to pull up the management GUI via STOP-S.But there is a better way if you have another Sun Ray server handy:1) allow your Sun Ray to connect to the default corporate server2) log in to a "regular" session, that is a Solaris or Linux desktop on the Sun Ray server itself3) in a terminal, utswitch to your server (/opt/SUNWut/bin/utswitch -h myserver)4) again, login to a regular session there5) in a terminal,  issue "/opt/SUNWut/lib/utload -S myserver -w"6) Watch your firmware load and wait7) the Sun Ray will reboot and connect to the first server again. Repeat steps 2-48) issue "/opt/SUNWut/lib/utload -S myserver -f SunRay.enableGUI"9) Press STOP-S and be merryNOTE: I'm sure there is even yet a better way - this is totally unsupported, most likely a figment of my imagination. In any case, this post will self-destruct in BOOM.

  Read the article

• Failed to load session gnome-fallback, after messing with metacity

  - by Carlito

  I am using Ubuntu 12.04 with gnome-session-fallback (Gnome Classic in the login menu). I wanted to remove window borders from metacity and stumbled across this post which basically changes window->mwm_decorated from TRUE to FALSE, which should remove the window borders in metacity. I know that it is also possible to change your GTK theme to one without window borders, but I wanted to try this solution. So I downloaded the source from my current metacity version (2.34.1) and changed that row. After compiling (./configure && make) I ran checkinstall which generates a .deb file from the source (had to change the version a bit to match the current one exactly). But after installing and loging out and back in, I couldn't load Gnome Classic. I get the error Failed to load session gnome-fallback. I could reinstall the old metacity which was still saved in /var/cache/apt/archives/, so everything is back where it was before. But I would like to mess around with metacity. Have I installed it correctly or did I forgot something? Are there any log files that I should check for solving this error? Thanks in advance!

  Read the article

• Ubuntu won't load, freezes on purple screen

  - by kara

  Last time I restarted my computer, I could not get Ubuntu to load; the screen would either go black, or would hang at the purple screen indefinitely. I have had some graphics problems in the past, but had put 'nomodeset' after 'quiet splash' in the grub command line, which at least let Ubuntu load. That doesn't work now, and doesn't work if I remove it. I looked up some answers, such as this one: Purple start screen - no splash screen However, when I enter the root in recovery mode in grub, I always get errors when I run those command lines and it won't let me modify the files. Also, if I run in recovery mode and then choose 'resume normal boot', it will continue. But instead of getting a usual interface, I get a black screen that asks for my username and password. I enter these, and it tells me I'm in Ubuntu 12.04, but I'm still on a black screen with texts. It also informs me that there are updates to install. When I use the command 'sudo apt-get update', it starts to retrieve the information, but then the screen goes blank after a couple of seconds and I can't do anything anymore. Any ideas?

  Read the article

• help with migrating from Widows, x64 FGLRX, CPU load, Java and Minecraft

  - by joxer

  Im new to ubuntu, it is the second time i have installed it. This comp is Dell studio 1558. some specs: CPU- intel core i7 Q720 1.6GHz, GPU- ATI Mobility Radeon HD 5400 FGLRX- i've fallowed these instructions among inspecting many others, i have tried all of the variants mentioned in that tread before reverting back to the drivers supplied with Ubuntu ( through additional drivers ) which apparently seem to work best. i am testing them with minecraft as silly as it may sound. in 2 to 60 minutes the FPS drop from 70+ to somewhere between 0 and 5. while "fgl_glxgears" runs at between 400 and 800 FPS smoothly.. I am using oracle ( sun ) JRE6 to run minecraft, i have gotten it through a tutorial linked on oracle's website, i currently have no other version of java installed ( was worse when i had a few others here ). after closing the game Ubuntu is similarly slow, i've checked the CPU load using System Monitor and it shows one of the CPU's jumping to 80%~100% load at a time.. a reboot solves it. i realize my mess is up to me to solve but a hand is always appreciated. tyvm in advance.

  Read the article

• String assembly by StringBuilder vs StringWriter and PrintWriter

  - by CPerkins

  I recently encountered an idiom I haven't seen before: string assembly by StringWriter and PrintWriter. I mean, I know how to use them, but I've always used StringBuilder. Is there a concrete reason for preferring one over the other? The StringBuilder method seems much more natural to me, but is it just style? I've looked at several questions here (including this one which comes closest: http://stackoverflow.com/questions/602279/stringwriter-or-stringbuilder ), but none in which the answers actually address the question of whether there's a reason to prefer one over the other for simple string assembly. This is the idiom I've seen and used many many times: string assembly by StringBuilder: public static String newline = System.getProperty("line.separator"); public String viaStringBuilder () { StringBuilder builder = new StringBuilder(); builder.append("first thing" + newline); builder.append("second thing" + newline); // ... several things builder.append("last thing" + newline); return builder.toString(); } And this is the new idiom: string assembly by StringWriter and PrintWriter: public String viaWriters() { StringWriter stringWriter = new StringWriter(); PrintWriter printWriter = new PrintWriter(stringWriter); printWriter.println("first thing"); printWriter.println("second thing"); // ... several things printWriter.println("last thing"); printWriter.flush(); printWriter.close(); return stringWriter.toString(); }

  Read the article

• Requiring library consumers reference additional assembly when using certain types

  - by Thomas G. Mayfield

  I have library code that uses ICSharpCode.SharpZipLib under the hood to make it easy to use ZIP files as data sources when running integration tests. As it stands, if I reference my library from another project, the other project will compile just fine, but when it accesses the code that uses SharpZipLib, I get an exception for it not finding the zip library: failed: System.IO.FileNotFoundException : Could not load file or assembly 'ICSharpCode.SharpZipLib, Version=0.85.5.452, Culture=neutral, PublicKeyToken=1b03e6acf1164f73' or one of its dependencies. The system cannot find the file specified. If the types in my library derived from a class in SharpZipLib, it'd generate a compile error CS0012. What other ways are there for triggering a CS0012, so that using code that requires SharpZipLib (but doesn't clearly indicate it) would cause consumer code to fail compilation? I've had similar problems in the past when I've used libraries like DeftTech.DuckTyping under the hood. I'd add my library code to a new project, start working, compile, run, and then suddenly hit an edge case that I'd used duck typing to get around and get a runtime error. What I'd most like is to have the same behavior as if I'd derived from a type in the 3rd-party library, so that a reference to my derived type generates a CS0012: The type 'type' is defined in an assembly that is not referenced. You must add a reference to assembly 'assembly'.

  Read the article

• Debugging mono assembly load error

  - by Will I Am

  I am running asp.net/mono on Ubuntu with lighthttpd/fastcgi. Somehow I suspect an assembly reference sneaked in that I cannot track down, and it's causing my application to fail (it works fine on windows under MS.NET). When I try it under mono, I get: Failed to create shadow copy (CopyFile). Description: HTTP 500. Error processing request. Stack Trace: System.ExecutionEngineException: Failed to create shadow copy (CopyFile). at (wrapper managed-to-native) System.Reflection.Assembly:LoadFrom (string,bool) at System.Reflection.Assembly.LoadFrom (System.String assemblyFile) [0x00000] at System.Web.Compilation.BuildManager.LoadAssembly (System.String path, System.Collections.Generic.List`1 al) [0x00000] at System.Web.Compilation.BuildManager.GetReferencedAssemblies () [0x00000] at System.Web.Compilation.BuildManager.GenerateAssembly (System.Web.Compilation.AssemblyBuilder abuilder, System.Collections.Generic.List`1 buildItems, System.Web.VirtualPath virtualPath, BuildKind buildKind) [0x00000] at System.Web.Compilation.BuildManager.BuildAssembly (System.Web.VirtualPath virtualPath) [0x00000] at System.Web.Compilation.BuildManager.GetCompiledType (System.String virtualPath) [0x00000] at System.Web.HttpApplicationFactory.InitType (System.Web.HttpContext context) [0x00000] Version information: Mono Version: 2.0.50727.1433; ASP.NET Version: 2.0.50727.1433 I am at a loss to how to debug this, as it's not giving me a hint of what assembly it's having problem with. Any ideas?

  Read the article

• Can't access CodeBase from a dynamically generated assembly.

  - by Michael Meadows

  I'm trying to create an assembly dynamically in .Net. I can't seem to figure out how to get the CodeBase property to return a value, however. Here's an example: var assemblyName = new AssemblyName { Name = "Whatever", CodeBase = Directory.GetCurrentDirectory() }; var assemblyBuilder = AppDomain.CurrentDomain .DefineDynamicAssembly(assemblyName, AssemblyBuilderAccess.RunAndSave); var moduleBuilder = assemblyBuilder.DefineDynamicModule("WhateverModule", "Whatever.dll"); var typeBuilder = moduleBuilder.DefineType("WhateverType", TypeAttributes.Public); var type = typeBuilder.CreateType(); assemblyBuilder.Save("Whatever.dll"); var codeBase = type.Assembly.CodeBase; // throws the below exception System.NotSupportedException was unhandled Message=The invoked member is not supported in a dynamic assembly. Source=mscorlib StackTrace: at System.Reflection.Emit.InternalAssemblyBuilder.get_CodeBase() at Stupid.Program.Main(String[] args) in C:\Users\Walking Disaster\Documents\Visual Studio 10\Projects\Lingual.Proxy\Stupid\Program.cs:line 25 at System.AppDomain._nExecuteAssembly(RuntimeAssembly assembly, String[] args) at System.AppDomain.ExecuteAssembly(String assemblyFile, Evidence assemblySecurity, String[] args) at Microsoft.VisualStudio.HostingProcess.HostProc.RunUsersAssembly() at System.Threading.ThreadHelper.ThreadStart_Context(Object state) at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean ignoreSyncCtx) at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state) at System.Threading.ThreadHelper.ThreadStart() Can anyone see what I'm doing wrong?

  Read the article

• Cant get lm-sensors to load ATI Radeon temp or fan

  - by woody

  New to Linux and having minor issues :/ . I followed this guide initially but did not recieve the proper output and did not show my ATI Radeon HD 5000 temp or fan speed. Then used this guide, same problems exhibited. No issues installing and no errors. I think its not reading i2c for some reason. The proprietary driver is installed and functioning correctly according fglrxinfo. I can use aticonfig commands and view both temp and fan. Any ideas on how to get it working under 'sensors'? When i run 'sudo sensors-detect' this is my ouput # sensors-detect revision 5984 (2011-07-10 21:22:53 +0200) # System: LENOVO IdeaPad Y560 (laptop) # Board: Lenovo KL3 This program will help you determine which kernel modules you need to load to use lm_sensors most effectively. It is generally safe and recommended to accept the default answers to all questions, unless you know what you're doing. Some south bridges, CPUs or memory controllers contain embedded sensors. Do you want to scan for them? This is totally safe. (YES/no): y Silicon Integrated Systems SIS5595... No VIA VT82C686 Integrated Sensors... No VIA VT8231 Integrated Sensors... No AMD K8 thermal sensors... No AMD Family 10h thermal sensors... No AMD Family 11h thermal sensors... No AMD Family 12h and 14h thermal sensors... No AMD Family 15h thermal sensors... No AMD Family 15h power sensors... No Intel digital thermal sensor... Success! (driver `coretemp') Intel AMB FB-DIMM thermal sensor... No VIA C7 thermal sensor... No VIA Nano thermal sensor... No Some Super I/O chips contain embedded sensors. We have to write to standard I/O ports to probe them. This is usually safe. Do you want to scan for Super I/O sensors? (YES/no): y Probing for Super-I/O at 0x2e/0x2f Trying family `National Semiconductor/ITE'... Yes Found unknown chip with ID 0x8502 Probing for Super-I/O at 0x4e/0x4f Trying family `National Semiconductor/ITE'... No Trying family `SMSC'... No Trying family `VIA/Winbond/Nuvoton/Fintek'... No Trying family `ITE'... No Some hardware monitoring chips are accessible through the ISA I/O ports. We have to write to arbitrary I/O ports to probe them. This is usually safe though. Yes, you do have ISA I/O ports even if you do not have any ISA slots! Do you want to scan the ISA I/O ports? (YES/no): y Probing for `National Semiconductor LM78' at 0x290... No Probing for `National Semiconductor LM79' at 0x290... No Probing for `Winbond W83781D' at 0x290... No Probing for `Winbond W83782D' at 0x290... No Lastly, we can probe the I2C/SMBus adapters for connected hardware monitoring devices. This is the most risky part, and while it works reasonably well on most systems, it has been reported to cause trouble on some systems. Do you want to probe the I2C/SMBus adapters now? (YES/no): y Using driver `i2c-i801' for device 0000:00:1f.3: Intel 3400/5 Series (PCH) Now follows a summary of the probes I have just done. Just press ENTER to continue: Driver `coretemp': * Chip `Intel digital thermal sensor' (confidence: 9) To load everything that is needed, add this to /etc/modules: #----cut here---- # Chip drivers coretemp #----cut here---- If you have some drivers built into your kernel, the list above will contain too many modules. Skip the appropriate ones! Do you want to add these lines automatically to /etc/modules? (yes/NO) My output for 'sensors' is: acpitz-virtual-0 Adapter: Virtual device temp1: +58.0°C (crit = +100.0°C) coretemp-isa-0000 Adapter: ISA adapter Core 0: +56.0°C (high = +84.0°C, crit = +100.0°C) Core 1: +57.0°C (high = +84.0°C, crit = +100.0°C) Core 2: +58.0°C (high = +84.0°C, crit = +100.0°C) Core 3: +57.0°C (high = +84.0°C, crit = +100.0°C) and my '/etc/modules' is: # /etc/modules: kernel modules to load at boot time. # # This file contains the names of kernel modules that should be loaded # at boot time, one per line. Lines beginning with "#" are ignored. lp rtc # Generated by sensors-detect on Fri Nov 30 23:24:31 2012 # Chip drivers coretemp

  Read the article

• Cant get lm-sensors to load ATI Radeon temp and fan or output all settings

  - by woody

  New to Linux and having minor issues :/ . I followed this guide initially but did not recieve the proper output and did not show my ATI Radeon HD 5000 temp or fan speed. Then used this guide, same problems exhibited. No issues installing and no errors. I think its not reading i2c for some reason. The proprietary driver is installed and functioning correctly according fglrxinfo. I can use aticonfig commands and view both temp and fan. Any ideas on how to get the ATI Radeon sensors working under 'sensors'? When i run 'sudo sensors-detect' this is my ouput # sensors-detect revision 5984 (2011-07-10 21:22:53 +0200) # System: LENOVO IdeaPad Y560 (laptop) # Board: Lenovo KL3 This program will help you determine which kernel modules you need to load to use lm_sensors most effectively. It is generally safe and recommended to accept the default answers to all questions, unless you know what you're doing. Some south bridges, CPUs or memory controllers contain embedded sensors. Do you want to scan for them? This is totally safe. (YES/no): y Silicon Integrated Systems SIS5595... No VIA VT82C686 Integrated Sensors... No VIA VT8231 Integrated Sensors... No AMD K8 thermal sensors... No AMD Family 10h thermal sensors... No AMD Family 11h thermal sensors... No AMD Family 12h and 14h thermal sensors... No AMD Family 15h thermal sensors... No AMD Family 15h power sensors... No Intel digital thermal sensor... Success! (driver `coretemp') Intel AMB FB-DIMM thermal sensor... No VIA C7 thermal sensor... No VIA Nano thermal sensor... No Some Super I/O chips contain embedded sensors. We have to write to standard I/O ports to probe them. This is usually safe. Do you want to scan for Super I/O sensors? (YES/no): y Probing for Super-I/O at 0x2e/0x2f Trying family `National Semiconductor/ITE'... Yes Found unknown chip with ID 0x8502 Probing for Super-I/O at 0x4e/0x4f Trying family `National Semiconductor/ITE'... No Trying family `SMSC'... No Trying family `VIA/Winbond/Nuvoton/Fintek'... No Trying family `ITE'... No Some hardware monitoring chips are accessible through the ISA I/O ports. We have to write to arbitrary I/O ports to probe them. This is usually safe though. Yes, you do have ISA I/O ports even if you do not have any ISA slots! Do you want to scan the ISA I/O ports? (YES/no): y Probing for `National Semiconductor LM78' at 0x290... No Probing for `National Semiconductor LM79' at 0x290... No Probing for `Winbond W83781D' at 0x290... No Probing for `Winbond W83782D' at 0x290... No Lastly, we can probe the I2C/SMBus adapters for connected hardware monitoring devices. This is the most risky part, and while it works reasonably well on most systems, it has been reported to cause trouble on some systems. Do you want to probe the I2C/SMBus adapters now? (YES/no): y Using driver `i2c-i801' for device 0000:00:1f.3: Intel 3400/5 Series (PCH) Now follows a summary of the probes I have just done. Just press ENTER to continue: Driver `coretemp': * Chip `Intel digital thermal sensor' (confidence: 9) To load everything that is needed, add this to /etc/modules: #----cut here---- # Chip drivers coretemp #----cut here---- If you have some drivers built into your kernel, the list above will contain too many modules. Skip the appropriate ones! Do you want to add these lines automatically to /etc/modules? (yes/NO) My output for 'sensors' is: acpitz-virtual-0 Adapter: Virtual device temp1: +58.0°C (crit = +100.0°C) coretemp-isa-0000 Adapter: ISA adapter Core 0: +56.0°C (high = +84.0°C, crit = +100.0°C) Core 1: +57.0°C (high = +84.0°C, crit = +100.0°C) Core 2: +58.0°C (high = +84.0°C, crit = +100.0°C) Core 3: +57.0°C (high = +84.0°C, crit = +100.0°C) and my '/etc/modules' is: # /etc/modules: kernel modules to load at boot time. # # This file contains the names of kernel modules that should be loaded # at boot time, one per line. Lines beginning with "#" are ignored. lp rtc # Generated by sensors-detect on Fri Nov 30 23:24:31 2012 # Chip drivers coretemp

  Read the article

• How Do Computers Work? [closed]

  - by Rob P.

  This is almost embarrassing ask...I have a degree in Computer Science (and a second one in progress). I've worked as a full-time .NET Developer for nearly five years. I generally seem competent at what I do. But I Don't Know How Computers Work! Please, bare with me for a second. A quick Google of 'How a Computer Works' will yield lots and lots of results, but I struggled to find one that really answered what I'm looking for. I realize this is a huge, huge question, so really, if you can just give me some keywords or some direction. I know there are components....the power supply, the motherboard, ram, CPU, etc...and I get the 'general idea' of what they do. But I really don't understand how you go from a line of code like Console.Readline() in .NET (or Java or C++) and have it actually do stuff. Sure, I'm vaguely aware of MSIL (in the case of .NET), and that some magic happens with the JIT compiler and it turns into native code (I think). I'm told Java is similar, and C++ cuts out the middle step. I've done some mainframe assembly, it was a few years back now. I remember there were some instructions and some CPU registers, and I wrote code....and then some magic happened....and my program would work (or crash). From what I understand, an 'Emulator' would simulate what happens when you call an instruction and it would update the CPU registers; but what makes those instructions work the way they do? Does this turn into an Electronics question and not a 'Computer' question? I'm guessing there isn't any practical reason for me to understand this, but I feel like I should be able to. (Yes, this is what happens when you spend a day with a small child. It takes them about 10 minutes and five iterations of asking 'Why?' for you to realize how much you don't know)

  Read the article

• How can I load style resources from a dynamically loaded Silverlight application (XAP)?

  - by Tom

  I've followed Tim Heuer's video for dynamically loading other XAP's (into a 'master' Silverlight application), as well as some other links to tweak the loading of resources and am stuck on the particular issue of loading style resources from within the dynamically loaded XAP (i.e. the contents of Assets\Styles.xaml). When I run the master/hosting applcation, it successfully streams the dynamic XAP and I can read the deployment info etc. and load the assembly parts. However, when I actuall try to create an instance of a form from the Dynamic XAP, it fails with Cannot find a Resource with the Name/Key LayoutRootGridStyle which is in it's Assets\Styles.xaml file (it works if I run it directly so I know it's OK). For some reason these don't show up as application resources - not sure if I've totally got the wrong end of the stick, or am just missing something? Code snippet below (apologies it's a bit messy - just trying to get it working first) ... '' # Here's the code that reads the dynamic XAP from the web server ... '' #... wCli = New WebClient AddHandler wCli.OpenReadCompleted, AddressOf OpenXAPCompleted wCli.OpenReadAsync(New Uri("MyTest.xap", UriKind.Relative)) '' #... '' #Here's the sub that's called when openread is completed '' #... Private Sub OpenXAPCompleted(ByVal sender As Object, ByVal e As System.Net.OpenReadCompletedEventArgs) Dim sManifest As String = New StreamReader(Application.GetResourceStream(New StreamResourceInfo(e.Result, Nothing), New Uri("AppManifest.xaml", UriKind.Relative)).Stream).ReadToEnd Dim deploymentRoot As XElement = XDocument.Parse(sManifest).Root Dim deploymentParts As List(Of XElement) = _ (From assemblyParts In deploymentRoot.Elements().Elements() Select assemblyParts).ToList() Dim oAssembly As Assembly = Nothing For Each xElement As XElement In deploymentParts Dim asmPart As AssemblyPart = New AssemblyPart() Dim source As String = xElement.Attribute("Source").Value Dim sInfo As StreamResourceInfo = Application.GetResourceStream(New StreamResourceInfo(e.Result, "application/binary"), New Uri(source, UriKind.Relative)) If source = "MyTest.dll" Then oAssembly = asmPart.Load(sInfo.Stream) Else asmPart.Load(sInfo.Stream) End If Next Dim t As Type() = oAssembly.GetTypes() Dim AppClass = (From parts In t Where parts.FullName.EndsWith(".App") Select parts).SingleOrDefault() Dim mykeys As Array If Not AppClass Is Nothing Then Dim a As Application = DirectCast(oAssembly.CreateInstance(AppClass.FullName), Application) For Each strKey As String In a.Resources.Keys If Not Application.Current.Resources.Contains(strKey) Then Application.Current.Resources.Add(strKey, a.Resources(strKey)) End If Next End If Dim objectType As Type = oAssembly.GetType("MyTest.MainPage") Dim ouiel = Activator.CreateInstance(objectType) Dim myData As UIElement = DirectCast(ouiel, UIElement) Me.splMain.Children.Add(myData) Me.splMain.UpdateLayout() End Sub '' #... '' # And here's the line that fails with "Cannot find a Resource with the Name/Key LayoutRootGridStyle" '' # ... System.Windows.Application.LoadComponent(Me, New System.Uri("/MyTest;component/MainPage.xaml", System.UriKind.Relative)) '' #... any thoughts?

  Read the article

• Adding an assembly to the GAC

  - by Cyclone

  Somehow my GAC got messed up, System.Core.dll was unregistered or something. I don't have the win7 sdk so I can't just use gacutil. Is there some way I can add the single assembly to the gac? Or some way to download JUST gacutil? Is the GAC stored in the registry? If so, where? Thanks for the help, this is a pretty ugly bug.

  Read the article

• mpmovieplayercontroller sometimes has slow load time, what can be the reason? (iPhone)

  - by donodare

  mpmovieplayercontroller sometimes has slow load time, what can be the reason? thanks

  Read the article

• Can .NET load and parse a properties file equivalent to Java Properties class?

  - by Tai Squared

  Is there an easy way in C# to read a properties file that has each property on a separate line followed by an equals sign and the value, such as the following: ServerName=prod-srv1 Port=8888 CustomProperty=Any value In Java, the Properties class handles this parsing easily: Properties myProperties=new Properties(); FileInputStream fis = new FileInputStream (new File("CustomProps.properties")); myProperties.load(fis); System.out.println(myProperties.getProperty("ServerName")); System.out.println(myProperties.getProperty("CustomProperty")); I can easily load the file in C# and parse each line, but is there a built in way to easily get a property without having to parse out the key name and equals sign myself? The C# information I have found seems to always favor XML, but this is an existing file that I don't control and I would prefer to keep it in the existing format as it will require more time to get another team to change it to XML than parsing the existing file.

  Read the article

• Load balancing a php program to support increasing users?

  - by Dave

  I have a php program that has been written keeping in mind a single server, so there are inherent limitation to how much it can handle. For example, the developer says that his current webhosting service provides him with "50 mysql connections" which he interprets as that only 50 people can be simultaneously logged onto it. What do we need to do if we want to scale it up so it can handle a load of 500 or more? How can we adapt this program to a "load balancer" with minimal changes? The application is writen in php and uses mysql.

  Read the article

• How to solve High Load average issue in Linux systems?

  - by RoCkStUnNeRs

  The following is the different load with cpu time in different time limit . The below output has parsed from the top command. TIME LOAD US SY NICE ID WA HI SI ST 12:02:27 208.28 4.2%us 1.0%sy 0.2%ni 93.9%id 0.7%wa 0.0%hi 0.0%si 0.0%st 12:23:22 195.48 4.2%us 1.0%sy 0.2%ni 93.9%id 0.7%wa 0.0%hi 0.0%si 0.0%st 12:34:55 199.15 4.2%us 1.0%sy 0.2%ni 93.9%id 0.7%wa 0.0%hi 0.0%si 0.0%st 13:41:50 203.66 4.2%us 1.0%sy 0.2%ni 93.8%id 0.8%wa 0.0%hi 0.0%si 0.0%st 13:42:58 278.63 4.2%us 1.0%sy 0.2%ni 93.8%id 0.8%wa 0.0%hi 0.0%si 0.0%st Following is the additional Information of the system? cat /proc/cpuinfo processor : 0 vendor_id : GenuineIntel cpu family : 6 model : 23 model name : Intel(R) Xeon(R) CPU E5410 @ 2.33GHz stepping : 10 cpu MHz : 1992.000 cache size : 6144 KB physical id : 0 siblings : 4 core id : 0 cpu cores : 4 apicid : 0 initial apicid : 0 fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 13 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe lm constant_tsc arch_perfmon pebs bts pni monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr dca sse4_1 lahf_lm bogomips : 4658.69 clflush size : 64 power management: processor : 1 vendor_id : GenuineIntel cpu family : 6 model : 23 model name : Intel(R) Xeon(R) CPU E5410 @ 2.33GHz stepping : 10 cpu MHz : 1992.000 cache size : 6144 KB physical id : 0 siblings : 4 core id : 1 cpu cores : 4 apicid : 1 initial apicid : 1 fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 13 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe lm constant_tsc arch_perfmon pebs bts pni monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr dca sse4_1 lahf_lm bogomips : 4655.00 clflush size : 64 power management: processor : 2 vendor_id : GenuineIntel cpu family : 6 model : 23 model name : Intel(R) Xeon(R) CPU E5410 @ 2.33GHz stepping : 10 cpu MHz : 1992.000 cache size : 6144 KB physical id : 0 siblings : 4 core id : 2 cpu cores : 4 apicid : 2 initial apicid : 2 fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 13 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe lm constant_tsc arch_perfmon pebs bts pni monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr dca sse4_1 lahf_lm bogomips : 4655.00 clflush size : 64 power management: processor : 3 vendor_id : GenuineIntel cpu family : 6 model : 23 model name : Intel(R) Xeon(R) CPU E5410 @ 2.33GHz stepping : 10 cpu MHz : 1992.000 cache size : 6144 KB physical id : 0 siblings : 4 core id : 3 cpu cores : 4 apicid : 3 initial apicid : 3 fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 13 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe lm constant_tsc arch_perfmon pebs bts pni monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr dca sse4_1 lahf_lm bogomips : 4654.99 clflush size : 64 power management: Memory: total used free shared buffers cached Mem: 2 1 1 0 0 0 Swap: 5 0 5 let me know why the system is getting abnormally this much high load?

  Read the article

• How can I get CPU load per core in C#?

  - by Intosia

  Hi, How can I get CPU Load per core (quadcore cpu), in C#? Thanks :)

  Read the article

• Proliant ML350 Won't Load Windows

  - by Mike

  I have a HP Proliant ML350 G4 running Windows 2003 Server Std Edition that will not load Windows on boot. It gave me a BSOD while running a recent Windows update and has not been able to boot since. The BSOD was a generic error, "Hardware Fault. Contact vendor." I am not getting any errors when the machine boots--it just hangs with a black screen when Windows starts to load. The machine will not boot into safe mode either--it gets stuck after beginning to load drivers. When trying to load the Windows recovery console I get the message that Windows cannot find any hard disks on the machine. This, despite having to load the driver for my storage controller. The HP Smart Start diagnostics finds no problems with my hard disks nor anything else. What should I try next? Mainly, I just want to be able to pull the data off my hard disks.

  Read the article

• Performance Drop Lingers after Load [closed]

  - by Charles

  Possible Duplicate: How do you do Load Testing and Capacity Planning for Databases I'm noticing a drop in performance after subsequent load tests. Although our cpu and ram numbers look fine, performance seems to degrade over time as sustained load is applied to the system. If we allow more time between the load tests, the performance gets back to about 1,000 ms, but if you apply load every 3 minutes or so, it starts to degrade to a point where it takes 12,000 ms. None of the application servers are showing lingering apache processes and the number of database connections cools down to about 3 (from a sustained 20). Is there anything else I should be looking out for here?

  Read the article

• "Could not load file or assembly 'System.Web.Mvc, ...

  - by Zack Peterson

  My new ASP.NET MVC Web Application works on my development workstation, but does not run on my web server... Server Error in '/' Application. Configuration Error Description: An error occurred during the processing of a configuration file required to service this request. Please review the specific error details below and modify your configuration file appropriately. Parser Error Message: Could not load file or assembly 'System.Web.Mvc, Version=1.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' or one of its dependencies. The system cannot find the file specified. Source Error: Line 44: <add assembly="System.Web.Abstractions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/> Line 45: <add assembly="System.Web.Routing, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/> Line 46: <add assembly="System.Web.Mvc, Version=1.0.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/> Line 47: <add assembly="System.Data.DataSetExtensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=B77A5C561934E089"/> Line 48: <add assembly="System.Xml.Linq, Version=3.5.0.0, Culture=neutral, PublicKeyToken=B77A5C561934E089"/> Source File: C:\inetpub\www.example.org\web.config Line: 46 Assembly Load Trace: The following information can be helpful to determine why the assembly 'System.Web.Mvc, Version=1.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' could not be loaded. WRN: Assembly binding logging is turned OFF. To enable assembly bind failure logging, set the registry value [HKLM\Software\Microsoft\Fusion!EnableLog] (DWORD) to 1. Note: There is some performance penalty associated with assembly bind failure logging. To turn this feature off, remove the registry value [HKLM\Software\Microsoft\Fusion!EnableLog]. Version Information: Microsoft .NET Framework Version:2.0.50727.3053; ASP.NET Version:2.0.50727.3053 Do I need to install the AspNetMVCBeta-setup.msi on the server? Or is there a different installer for servers?

  Read the article

• What is the best way to deserialize generics written with a different version of a signed assembly?

  - by Rick Minerich

  In other cases it has been suggested that you simply add a SerializationBinder which removes the version from the assembly type. However, when using generic collections of a type found in a signed assembly, that type is strictly versioned based on its assembly. Here is what I've found works. internal class WeaklyNamedAssemblyBinder : SerializationBinder { public override Type BindToType(string assemblyName, string typeName) { ResolveEventHandler handler = new ResolveEventHandler(CurrentDomain_AssemblyResolve); AppDomain.CurrentDomain.AssemblyResolve += handler; Type returnedType; try { AssemblyName asmName = new AssemblyName(assemblyName); var assembly = Assembly.Load(asmName); returnedType = assembly.GetType(typeName); } catch { returnedType = null; } finally { AppDomain.CurrentDomain.AssemblyResolve -= handler; } return returnedType; } Assembly CurrentDomain_AssemblyResolve(object sender, ResolveEventArgs args) { string truncatedAssemblyName = args.Name.Split(',')[0]; Assembly assembly = Assembly.Load(truncatedAssemblyName); return assembly; } } However, causing the binding process to change globally seems rather dangerous to me. Strange things could happen if serialization was happening in multiple threads. Perhaps a better solution is to do some regex manipulation of the typeName? What do you think?

  Read the article

< Previous Page | 34 35 36 37 38 39 40 41 42 43 44 45  | Next Page >