Search Results

Search found 1314 results on 53 pages for 'locate'.

Page 38/53 | < Previous Page | 34 35 36 37 38 39 40 41 42 43 44 45  | Next Page >

  • Apache2 config variable is not defined

    - by Kurt Bourbaki
    I installed apache2 on ubuntu 13.10. If I try to restart it using sudo /etc/init.d/apache2 restart I get this message: AH00558: apache2: Could not reliably determine the server's fully qualified domain name, using 127.0.1.1. Set the 'ServerName' directive globally to suppress this message So I read that I should edit my httpd.conf file. But, since I can't find it in /etc/apache2/ folder, I tried to locate it using this command: /usr/sbin/apache2 -V But the output I get is this: [Fri Nov 29 17:35:43.942472 2013] [core:warn] [pid 14655] AH00111: Config variable ${APACHE_LOCK_DIR} is not defined [Fri Nov 29 17:35:43.942560 2013] [core:warn] [pid 14655] AH00111: Config variable ${APACHE_PID_FILE} is not defined [Fri Nov 29 17:35:43.942602 2013] [core:warn] [pid 14655] AH00111: Config variable ${APACHE_RUN_USER} is not defined [Fri Nov 29 17:35:43.942613 2013] [core:warn] [pid 14655] AH00111: Config variable ${APACHE_RUN_GROUP} is not defined [Fri Nov 29 17:35:43.942627 2013] [core:warn] [pid 14655] AH00111: Config variable ${APACHE_LOG_DIR} is not defined [Fri Nov 29 17:35:43.947913 2013] [core:warn] [pid 14655] AH00111: Config variable ${APACHE_LOG_DIR} is not defined [Fri Nov 29 17:35:43.948051 2013] [core:warn] [pid 14655] AH00111: Config variable ${APACHE_LOG_DIR} is not defined [Fri Nov 29 17:35:43.948075 2013] [core:warn] [pid 14655] AH00111: Config variable ${APACHE_LOG_DIR} is not defined AH00526: Syntax error on line 74 of /etc/apache2/apache2.conf: Invalid Mutex directory in argument file:${APACHE_LOCK_DIR} Line 74 of /etc/apache2/apache2.conf is this: Mutex file:${APACHE_LOCK_DIR} default I gave a look at my /etc/apache2/envvar file, but I don't know what to do with it. What should I do?

    Read the article

  • Syncronization between folders MAC OS Lion

    - by Andre Carvalho
    I have an iMac at home and I use a Macbook pro for work. I also have a time capsule at home containing my main folder with my main files. I use it as a NAS besides the Time Machine backup tool. I have several personal files I need to be accessing both at home and at work. My wife, who works at home, uses sometimes the same .XLS files and .DOC files I might have used during my day at work, away from home. My question is: Is there a software, or tool that a I can use to sync my iMac and my MB Pro folders? Remembering that: There might be a chance that my wife and I have changed the same files during the day, so the files would have to be merged so none of the information added by either me or my wife would be lost. The software/tool that would be installed on the MB Pro would need to mount the Time Capsule volume so it could locate the main folder on it. It has to be done automatically when my MB is at home ( with a schedule option ); I have tested some softwares like synctwofolders and Chronosync but none fulfilled all my needs. The first couldn't mount the Time Capsule Volume and didn't have the many schedule options. I really liked Chronosync, but it doesn't merge the files. When it detects a conflict ( for instance: my wife changed a .DOC file on the iMAC and I changed the same file on the MB it asks you to choose which version you want to keep instead of allowing you simply to merge them ). I don't have much experience with automator or scripts but maybe you can give me a hand with that.

    Read the article

  • Where is vmlinux on my Ubuntu installation?

    - by Jason Baker
    I'm trying to work with starting up oprofile, and I'm running into a problem at this step: opcontrol --vmlinux=/path/to/vmlinux Ubuntu has no package called vmlinux, and when I do a locate vmlinux, I get a lot of files: /usr/src/linux-headers-2.6.28-14/arch/h8300/boot/compressed/vmlinux.lds /usr/src/linux-headers-2.6.28-14/arch/m68k/kernel/vmlinux-std.lds /usr/src/linux-headers-2.6.28-14/arch/m68k/kernel/vmlinux-sun3.lds /usr/src/linux-headers-2.6.28-14/arch/mn10300/boot/compressed/vmlinux.lds /usr/src/linux-headers-2.6.28-14/arch/sh/boot/compressed/vmlinux_64.lds /usr/src/linux-headers-2.6.28-14/arch/x86/boot/compressed/vmlinux_32.lds /usr/src/linux-headers-2.6.28-14/arch/x86/boot/compressed/vmlinux_64.lds /usr/src/linux-headers-2.6.28-14/include/asm-generic/vmlinux.lds.h /usr/src/linux-headers-2.6.28-15/arch/h8300/boot/compressed/vmlinux.lds /usr/src/linux-headers-2.6.28-15/arch/m68k/kernel/vmlinux-std.lds /usr/src/linux-headers-2.6.28-15/arch/m68k/kernel/vmlinux-sun3.lds /usr/src/linux-headers-2.6.28-15/arch/mn10300/boot/compressed/vmlinux.lds /usr/src/linux-headers-2.6.28-15/arch/sh/boot/compressed/vmlinux_64.lds /usr/src/linux-headers-2.6.28-15/arch/x86/boot/compressed/vmlinux_32.lds /usr/src/linux-headers-2.6.28-15/arch/x86/boot/compressed/vmlinux_64.lds /usr/src/linux-headers-2.6.28-15/include/asm-generic/vmlinux.lds.h /usr/src/linux-headers-2.6.28-16/arch/h8300/boot/compressed/vmlinux.lds /usr/src/linux-headers-2.6.28-16/arch/m68k/kernel/vmlinux-std.lds /usr/src/linux-headers-2.6.28-16/arch/m68k/kernel/vmlinux-sun3.lds /usr/src/linux-headers-2.6.28-16/arch/mn10300/boot/compressed/vmlinux.lds /usr/src/linux-headers-2.6.28-16/arch/sh/boot/compressed/vmlinux_64.lds /usr/src/linux-headers-2.6.28-16/arch/x86/boot/compressed/vmlinux_32.lds /usr/src/linux-headers-2.6.28-16/arch/x86/boot/compressed/vmlinux_64.lds /usr/src/linux-headers-2.6.28-16/include/asm-generic/vmlinux.lds.h Which one of these is the one I'm looking for?

    Read the article

  • nginx reverse ssl proxy with multiple subdomains

    - by BrianM
    I'm trying to locate a high level configuration example for my current situation. We have a wildcard SSL certificate for multiple subdomains which are on several internal IIS servers. site1.example.com (X.X.X.194) -> IISServer01:8081 site2.example.com (X.X.X.194) -> IISServer01:8082 site3.example.com (X.X.X.194) -> IISServer02:8083 I am looking to handle the incoming SSL traffic through one server entry and then pass on the specific domain to the internal IIS application. It seems I have 2 options: Code a location section for each subdomain (seems messy from the examples I have found) Forward the unencrypted traffic back to the same nginx server configured with different server entries for each subdomain hostname. (At least this appears to be an option). My ultimate goal is to consolidate much of our SSL traffic to go through nginx so we can use HAProxy to load balance servers. Will approach #2 work within nginx if I properly setup the proxy_set_header entries? I envision something along the lines of this within my final config file (using approach #2): server { listen Y.Y.Y.174:443; #Internally routed IP address server_name *.example.com; proxy_pass http://Y.Y.Y.174:8081; } server { listen Y.Y.Y.174:8081; server_name site1.example.com; -- NORMAL CONFIG ENTRIES -- proxy_pass http://IISServer01:8081; } server { listen Y.Y.Y.174:8081; server_name site2.example.com; -- NORMAL CONFIG ENTRIES -- proxy_pass http://IISServer01:8082; } server { listen Y.Y.Y.174:8081; server_name site3.example.com; -- NORMAL CONFIG ENTRIES -- proxy_pass http://IISServer02:8083; } This seems like a way, but I'm not sure if it's the best way. Am I missing a simpler approach to this?

    Read the article

  • "Open file location" is broken for Win Live Photo Gallery and Chrome

    - by Arnold Spence
    Symptoms: Windows Live Photo Gallery: Right clicking on an image (.jpg, .png) and selecting the context menu item "Open file location" should open the containing folder in explorer. Instead, I get an error dialog stating "This file does not have a program associated with it for performing this action. Please install a program or, if one is already installed, create an association in the Default Programs control panel." Chrome: After downloading a file (of any type), clicking the down arrow on the download status bar at the bottom and clicking "Show in folder" results in the same error dialog mentioned above. I'm using Windows 7. I'm pretty sure this is a registry entry gone bad but I've been unable to locate any information about this specific problem. It's not a file type association problem as I am not trying to open the files concerned, I'm trying to open an explorer window at the location for the file. I've found a similar issue that somebody had with explorer itself. However, the suggested registry fixes here for "Folder", "Directory" and "Drive" did not solve the problem. Also, If I use the searchbar in explorer to do a search, right click on a file and choose "Open file location", explorer jumps to that location without any trouble. I have not yet identified other programs with this issue.

    Read the article

  • Updating Dell PowerEdge firmware on Ubuntu?

    - by Shtééf
    The company I work for recently got hands on a batch of second hand PowerEdge SC1425 machines. We'd like to put these to good use. Our operating system of choice is Ubuntu Server 10.04 64-bit, which installs just peachy on this type of machine. Now I'd like to install the firmware updates from Dell, which are apparently marked as recommended. This includes the updates for the BIOS, the BMC, and possibly some other hardware. I find it incredibly difficult to locate the files on the Dell website, and install any of them on an Ubuntu system: I downloaded the file OM_6.2.0_SUU_A01.iso. I believe I've read that the SUU DVD should be able to update any recent PowerEdge. Is this correct? Is this the latest version? Besides the version number, does A01 have any meaning? Is this image bootable? (At the moment, I just nosed around with a loop device mount.) Running /bin/bash ./suu from the DVD, I get: # /bin/bash ./suu ./suu: line 262: ./java/linux/i386/bin/java: No such file or directory The file exists and is executable, though. But I cannot execute it directly from the shell either.

    Read the article

  • SpamAssassin bayesian score discrepancies

    - by CaptSaltyJack
    This makes my brain hurt. For some reason, SpamAssassin is giving high scores to certain emails, but when I test them on the command line, they get a low score. This one particular email has this in the header: X-Spam-Flag: YES X-Spam-Score: 8.521 X-Spam-Level: ******** X-Spam-Status: Yes, score=8.521 tagged_above=-9999 required=5 tests=[BAYES_99=3.5, BAYES_999=0.2, HTML_MESSAGE=0.001, NO_RECEIVED=-0.001, NO_RELAYS=-0.001, RAZOR2_CF_RANGE_51_100=0.5, RAZOR2_CF_RANGE_E8_51_100=1.886, RAZOR2_CHECK=0.922, URIBL_RHS_DOB=1.514] autolearn=no Yet when I dump the raw email into a file msg and run sudo su amavis -c 'spamassassin -t msg', I get this output: Content analysis details: (3.8 points, 5.0 required) pts rule name description ---- ---------------------- -------------------------------------------------- 1.5 URIBL_RHS_DOB Contains an URI of a new domain (Day Old Bread) [URIs: cliobeads.com] -1.0 ALL_TRUSTED Passed through trusted hosts only via SMTP 0.0 HTML_MESSAGE BODY: HTML included in message -0.0 BAYES_20 BODY: Bayes spam probability is 5 to 20% [score: 0.1855] 1.9 RAZOR2_CF_RANGE_E8_51_100 Razor2 gives engine 8 confidence level above 50% [cf: 100] 0.5 RAZOR2_CF_RANGE_51_100 Razor2 gives confidence level above 50% [cf: 100] 0.9 RAZOR2_CHECK Listed in Razor2 (http://razor.sf.net/) I'm really confused as to why when the email comes in, it gets a completely different score attached to it than when I run spamassassin -t. Is there some other way I should be testing emails? Also, my users have the ability to drag false positives into a folder called "False Positives," and every day a cron job fires off that runs this on every message in every user's folder: sa-learn --dbpath=/var/lib/amavis/.spamassassin --ham /tmp/*-*.eml >/dev/null I ran sudo locate bayes_toks and there's definitely only one bayes DB on the system, in /var/lib/amavis/.spamassassin. I'm clueless, any help would be great and may help restore my sanity!

    Read the article

  • Remote desktop connection to network printer

    - by andand
    I'm trying to print a document from a remote WinXP machine to a network printer I use on a local Win7 machine using Remote Desktop. The network printer does not appear in the list of those available on the WinXP box. In more detail, the local machine runs Windows 7 (no admin rights) and connects to a network printer managed by a print server (i.e. not using a local TCP/IP Port). I have access to a Windows XP host on a separate network which I access using Remote Desktop. I would like to have print requests from the remote XP box forwarded to the network printer I use on the Windows 7 machine. The XP machine cannot access the print server I use on the Win7 machine nor can it create a TCP/IP port to connect directly to the printer (network configuration issues). After having consulting the KB312135 I confirmed the "Printers" option was selected in the Remote Desktop Client, Local Resources Tab, yet the network printer does not appear on the list of available printers on the XP box. Is this a lost cause or is there something else I haven't managed to locate yet?

    Read the article

  • Can't connect to MS SQL Server database using SSMS

    - by Charles
    I have a database on line with Godaddy (who uses SQL Server 2005). They provide basic management tools, but tell you that for more advanced tools you can connect directly using SSMS. I followed their instructions to ensure my online database will accept remote connections, and can apparently log in using SSMS with success (after giving my hostname and access data). However: Now from in SSMS, when attempting to expand the "Databases" folder tree, I get the following error: Failed to retrieve data for this request. (Microsoft.SqlServer.Management.Sdk.Sfc) An exception occurred while executing a Transact-SQL statement or batch. (Microsoft.SqlServer.ConnectionInfo) The server principal "cmitchell" is not able to access the database "3pointdb" under the current security context. (Microsoft SQL Server, Error: 916) The irony is that 3pointdb isn't my database. It is just another in a long list of databases that show up when I access my Godaddy backend. From SSMS, I selected the default database to be the name of my database, which it did locate on the list when I browsed. Still same error message. It is trying to connect to a database that isn't mine! :( Godaddy support, after a bit of testing, said the problem isn't on their end. it's on mine. – Charles

    Read the article

  • Error installing new rails version. Failed to build gem native extension.

    - by davidcmolina
    I am trying to build my first ruby on rails app using the following guide (http://ruby.railstutorial.org/chapters/a-demo-app#code-demo_gemfile_sqlite_version_redux) and have run into a few obstacles. The first, receiving errors when upgrading to the latest rails version 3.2.8. bash-3.2$ gem install rails Building native extensions. This could take a while... ERROR: Error installing rails: ERROR: Failed to build gem native extension. /Users/davidmolina/.rvm/rubies/ruby-1.9.3-p194/bin/ruby extconf.rb creating Makefile make compiling generator.c make: /usr/bin/gcc-4.2: No such file or directory make: *** [generator.o] Error 1 Gem files will remain installed in /Users/davidmolina/.rvm/gems/ruby-1.9.3-p194/gems/json-1.7.5 for inspection. Results logged to /Users/davidmolina/.rvm/gems/ruby-1.9.3-p194/gems/json-1.7.5/ext/json/ext/generator/gem_make.out Even when trying to install from rails app: $ gem install rails Building native extensions. This could take a while... ERROR: Error installing rails: ERROR: Failed to build gem native extension. /Users/davidmolina/.rvm/rubies/ruby-1.9.3-p194/bin/ruby extconf.rb creating Makefile make compiling generator.c make: /usr/bin/gcc-4.2: No such file or directory make: *** [generator.o] Error 1 Gem files will remain installed in /Users/davidmolina/.rvm/gems/ruby-1.9.3-p194/gems/json-1.7.5 for inspection. Results logged to /Users/davidmolina/.rvm/gems/ruby-1.9.3-p194/gems/json-1.7.5/ext/json/ext/generator/gem_make.out When trying to Bundle Install: $ bundle install Could not locate Gemfile Background details: Mac OS X Version 10.8.2 Ruby 1.9.3 Rails 2.3.4 I'm wondering if there is a direct one-liner or gem that is missing?

    Read the article

  • What is causing Null Pointer Exception in the following code in java? [migrated]

    - by Joe
    When I run the following code I get Null Pointer Exception. I cannot figure out why that is happening. Need Help. public class LinkedList<T> { private Link head = null; private int length = 0; public T get(int index) { return find(index).item; } public void set(int index, T item) { find(index).item = item; } public int length() { return length; } public void add(T item) { Link<T> ptr = head; if (ptr == null) { // empty list so append to head head = new Link<T>(item); } else { // non-empty list, so locate last link while (ptr.next != null) { ptr = ptr.next; } ptr.next = new Link<T>(item); } length++; // update length cache } // traverse list looking for link at index private Link<T> find(int index) { Link<T> ptr = head; int i = 0; while (i++ != index) { if(ptr!=null) { ptr = ptr.next; } } return ptr; } private static class Link<S> { public S item; public Link<S> next; public Link(S item) { this.item = item; } } public static void main(String[] args) { new LinkedList<String>().get(1); } }

    Read the article

  • vCenter 5.1 SSO Configuration option not available in Web Client?

    - by goober
    Problem I just finished separately installing vCenter Server 5.1. I installed the components separately but on the same machine using a local SQL 2008 R2 DB (not SQL express). Everything appears to be working correctly with the exception of SSO. It doesn't find the AD server. This is to be expected (see below) but I don't know how to fix it. Potential Leads / Steps taken During the install of SSO, I was logged on as a local administrator (waiting on central IT dept to create a service account). As a result, I received a message saying that SSO wouldn't be able to automatically locate the AD. (fair eonugh) After I read up on it a little bit, I believed I could go into the SSO Configuration option in the Web client, like so: However, what I actually see is: I also notice that the "SSO Users and Groups" entry is not there. Betting that has something to do with it as well. Question How can I get the "Configure" Option to show up for SSO? Overall goal: How can I manually enter the AD server in this scenario while logged in as a local administrator? References VMWare vCenter 5.1 Installation: Part 9 (Optional SSO Configuration) [Derek Seaman's Blog] (used the image of correct configuration menu)

    Read the article

  • Active directory Kerberos OSX problems

    - by Temotodochi
    I'll try to keep this short, but informative. I'm currently unable to bind OSX lion (10.7.4) machines to our AD. OSX kerberos (heimdal) is unable to locate the KDC service. However i can bind linux & windows machines to the AD without any problems in the same network AD controls the domain DNS and all the relevant _kerberos._tcp.x.domain.com and _kpasswd SRV DNS records are there and resolve fine when tried from OSX machines. Defined ports are open for service and manually accessible from OSX. When i try kinit in the OSX, i can get the first auth through (wrong passwords fail instantly), but when supplied with correct password, kinit fails after some waiting with "unable to reach KDC". All machines run NTP and have correct time. During testing, network is not firewalled between the machines Linux and windows machines have no problems whatsoever I have tried with and without /etc/krb5.conf - OSX by default does not need it in the krb5.conf i used a working config from one of our linux machines. dsconfigad fails with simple "connection failed to the directory server" I'm a bit baffled with this. OSX is like the KDC is nowhere to be found and at the same time my test machines with windows 7 and some linux (centos 6 & debian 6) machines have no problems whatsoever. Same network, same configurations. I'm missing some vital piece of configuration somewhere, and i can't find out what it is.

    Read the article

  • Problem with PXE boot

    - by user70523
    I followed the following link for PXE boot, http://www.howtoforge.com/setting-up-a-pxe-install-server-on-ubuntu-9.10-p3 and I was able to ping the client from the server and also when I booted up the client It is getting the IP address from the server. But later,I got this error PXELinux 3.82 2009-06-09 . . . [other informations] !PXE Entry point found (we hope) at 9D3B:0109 via plan A UNDI code segment at 9D3B len 16C2 UNDI data segment at 933B len A000 Getting cached packet 01 02 03 . . . [other informations] TFTP prefix: Trying to load: pxelinux.cfg/ec5db4c0-74fe-d511-b9e7-3d9235afe5a1 Trying to load: pxelinux.cfg/01-00-17-31-b6-5e-a8 Trying to load: pxelinux.cfg/0A64491E Trying to load: pxelinux.cfg/0A64491 Trying to load: pxelinux.cfg/0A6449 Trying to load: pxelinux.cfg/0A644 Trying to load: pxelinux.cfg/0A64 Trying to load: pxelinux.cfg/0A6 Trying to load: pxelinux.cfg/0A Trying to load: pxelinux.cfg/0 Trying to load: pxelinux.cfg/default Unable to locate configuration file Boot failed: press a key to retry or wait for reset I have put all the files mentioned in the link in tftpboot. Can anyone explain what could be the problem. Thanks in advance

    Read the article

  • Compiling Gearman PHP Library for CentOS 5.8

    - by Andrew Ellis
    I've been trying to get Gearman compiled on CentOS 5.8 all afternoon. Unfortunately I am restricted to this version of CentOS by my CTO and how he has our entire network configured. I think it's simply because we don't have enough resources to upgrade our network... But anyways, the problem at hand. I have searched through Server Fault, Stack Overflow, Google, and am unable to locate a working solution. What I have below is stuff I have pieced together from my searching. Searches have told said to install the following via yum: yum -y install --enablerepo=remi boost141-devel libgearman-devel e2fsprogs-devel e2fsprogs gcc44 gcc-c++ To get the Boost headers working correctly I did this: cp -f /usr/lib/boost141/* /usr/lib/ cp -f /usr/lib64/boost141/* /usr/lib64/ rm -f /usr/include/boost ln -s /usr/include/boost141/boost /usr/include/boost With all of the dependancies installed and paths setup I then download and compile gearmand-1.1.2 just fine. wget -O /tmp/gearmand-1.1.2.tar.gz https://launchpad.net/gearmand/1.2/1.1.2/+download/gearmand-1.1.2.tar.gz cd /tmp && tar zxvf gearmand-1.1.2.tar.gz ./configure && make -j8 && make install That works correctly. So now I need to install the Gearman library for PHP. I have attempted through PECL and downloading the source directly, both result in the same error: checking whether to enable gearman support... yes, shared not found configure: error: Please install libgearman What I don't understand is I installed the libgearman-devel package which also installed the core libgearman. The installation installs libgearman-devel-0.14-3.el5.x86_64, libgearman-devel-0.14-3.el5.i386, libgearman-0.14-3.el5.x86_64, and libgearman-0.14-3.el5.i386. Is it possible the package version is lower than what is required? I'm still poking around with this, but figured I'd throw this up to see if anyone has a solution while I continue to research a fix. Thanks!

    Read the article

  • How to diagnose a hang when creating a new folder in explorer.exe

    - by Jack Ukleja
    I have been having some issues with explorer.exe hanging when I create a new folder. If I use Analyse Wait Chain in the Resource Monitor it says "One or more threads of explorer.exe are waiting to finish network I/O". When I look at the offending thread in Process Explorer it reveals nothing interesting: ntdll.dll!ZwWaitForMultipleObjects+0xa KERNELBASE.dll!GetCurrentThread+0x36 kernel32.dll!WaitForMultipleObjectsEx+0xb3 USER32.dll!PeekMessageW+0x1cd USER32.dll!MsgWaitForMultipleObjectsEx+0x2a USER32.dll!MsgWaitForMultipleObjects+0x20 SHELL32.dll!SHAppBarMessage+0x41e SHELL32.dll!DragAcceptFiles+0x2a3c SHELL32.dll!DragAcceptFiles+0x2a4f SHELL32.dll!Ordinal211+0x124 SHELL32.dll!SHChangeNotification_Unlock+0x12f4 USER32.dll!GetSystemMetrics+0x2b1 USER32.dll!IsDialogMessageW+0x19b USER32.dll!IsDialogMessageW+0x1e1 ntdll.dll!KiUserCallbackDispatcher+0x1f USER32.dll!PeekMessageW+0xba USER32.dll!PeekMessageW+0x89 SHELL32.dll!SHChangeNotification_Unlock+0xd9f SHELL32.dll!Ordinal885+0x1407 SHLWAPI.dll!SHRegGetUSValueW+0x306 kernel32.dll!BaseThreadInitThunk+0xd ntdll.dll!RtlUserThreadStart+0x21 While I was looking at the explorer.exe threads I did notice a fair few that talk about ETW (Event Tracing for Windows) so obviously explorer.exe uses tracing. So I decided to try and user TraceView.exe to try and listen in on the explorer.exe traces. The problem is TraceView requires some difficult-to-come-by stuff... either pdbs, or CTL files, and .TMF files. I tried using the explorer.pdb that comes with the Windows SDK but that did not work. I do not see explorer.exe in the "named providers". And I have no idea where to locate the ctl or .TMF files for explorer.exe. So the question is: Is there a way to view the ETW trace messages from explorer? Or shall I just not bother and go back to the age old technique of disabling every explorer extenion one-by-one in the hope its one of them. (Prefer the former as I like to get to the bottom of things!!)

    Read the article

  • Dual boot windows 8 pro and windows 7 on XPS 8500 Special Edition

    - by Jesse
    I am trying to install a dual boot with windows 7 premium and windows 8 Pro on an XPS 8500 special edition. I created a new primary partition on my C: drive, inserted the windows 8 install disk, and rebooted my computer from DVD. I select custom install and the dialog box saying "Where do you want to install windows at?" pops up but none of my drives are listed. Please help me determine what is going on. I don't understand why none of my drives are showing up on this menu. Not even the original drive. When I go to load driver and click on the partition I created it tells me "No signed device drivers were found. Make sure the installation media contains the correct drivers, and then click OK." resolved above issue by running setup from the source folder on the install disk instead of booting from DVD. Was able to locate my new partition and start install. It completes the first step of "Copying windows files" just fine but then on the next step "Getting files ready for installation" my computer restarts and attempts to load windows 8 but keeps telling me my pc needs to restart. This keeps going on in an infinite boot loop. Please help, this has been a nightmare!

    Read the article

  • Alternatives to using email (in particular, Outlook) as a knowledge store?

    - by Umber Ferrule
    I suspect that, like many people, I use my work email account (accessed via Outlook 2007) to store information. I generally try to group similar things in folders and sub-folders, but with a multitude of folders this gets very unwieldy. In particular, it can be a bind to locate things using Outlook's tree structure. (As an aside: I've yet to come across a good free search add-on for Outlook.) I realise Outlook is not the best place to store all my information and I'd prefer not to. In an ideal world I'd like to be able to organise all of the information stored in Outlook in a MindMap (my software of choice being Freemind) or Wiki. To maintain an email audit-trail, I've considered saving individual emails as files using a MindMap or Wiki to link them. What do people think of this? (I can't say I relish the thought of the exporting process!) Whatever I do is going to involve some pain (i.e. setting up a Wiki/MindMap) or sticking with what Outlook provides currently. Has anyone been in the same position? Has anyone mass-migrated information from Outlook? If so, what was the best way? Any ideas or alternative proposals?

    Read the article

  • linux + create host file from CSV file by sed or awk or perl

    - by yael
    I have the following CSV file this file defined which Linux machine exist in the system and there ip's my target is to create host file from this file please advice how to create host file as example 1 from my CSV file ( I need to match the IP address from CSV file and put it on the first field of the host file , then match the LINUX name and locate this name in the sec field – as example 1 ) remark - should be performed by sed or awk or perl .. , I need to write the solution in my bash script CSV file , machine , VM-LINUX1 , SZ , Phy , 10.213.158.18 , PROXY , VM-LINUX2 , SZ , 10.213.158.19 , OLD HW , VM-LINUX3 , SZ , 10.213.158.20 , , VM-LINUX4 , SZ , Phy , 10.213.158.21 , , VM-LINUX5 , SZ , Phy , OUT , EXT , LAN3 , 10.213.158.22 , INTERNAL , VM-LINUX6 , SZ , Phy , 10.213.158.23 , , server , new HW , VM-LINUX7 , SZ , Phy , 10.213.158.24 , OUT, LAN3 , VM-LINUX8 , SZ , 10.213.158.25 , OLD HW , machine , VM-LINUX9 , SZ , Phy , INT , 10.213.158.26 , LAN2, AN45, , VM-LINUX10 , SZ , Phy , 10.213.158.27 , , VM-LINUX11 , SZ , Phy , LAN5 , 10.213.158.28 , example 1 ( host file ) 10.213.158.18 VM-LINUX1 10.213.158.19 VM-LINUX2 10.213.158.20 VM-LINUX3 10.213.158.21 VM-LINUX4 10.213.158.22 VM-LINUX5 10.213.158.23 VM-LINUX6 10.213.158.24 VM-LINUX7 10.213.158.25 VM-LINUX8 10.213.158.26 VM-LINUX9 10.213.158.27 VM-LINUX10 10.213.158.25 VM-MACHINE8 10.213.158.26 STAR9 10.213.158.27 TOP10 10.213.158.28 SERVER11

    Read the article

  • In Fedora, Perl program cannot find Time::Piece library

    - by Eric Leschinski
    I have a Perl program named /usr/bin/octbatch running as a script on Fedora 17 Linux. When I run this command: /usr/bin/octbatch I get the error: Can't locate Time/Piece.pm in @INC (@INC contains: /usr/local/lib64/perl5 /usr/local/share/perl5 /usr/lib64/perl5/vendor_perl /usr/share/perl5/vendor_perl /usr/lib64/perl5 /usr/share/perl5) at /usr/bin/octbatch line 6. BEGIN failed--compilation aborted at /usr/bin/octbatch line 6. Here is the relevant lines of the Perl script: #!/usr/bin/perl -wT $ENV{PATH} = "/bin:/usr/bin:/usr/local/bin"; use strict; use POSIX qw(setsid :sys_wait_h); use Time::Piece; use Time::Local; I have to install Piece.pm so perl can find it. I've already installed it with this command (using the defaults): /usr/bin/perl -MCPAN -e install Time::Piece I have the Piece.pm file in /home/el/perl5/lib/perl5/x86_64-linux-thread-multi/ however when I run the octbatch command I get the same error as above. Like it can't even find it. Here is my PERL5LIB variable: el@defiant ~/gnuoctbluehost/single_stock_analysis $ env | grep PERL5 PERL5LIB=/home/el/perl5/lib/perl5/x86_64-linux-thread-multi:/home/el/perl5/lib/perl5 And the Piece.pm is located under /home/el/perl5/lib/perl5/x86_64-linux-thread-multi So my question is, Why is it not finding my Piece.pm file? And what are the ways I can get the @INC variable to include it. Or how do I make perl see it?

    Read the article

  • Pattern matching gnmap fields with SED

    - by Ovid
    I am testing the regex needed for creating field extraction with Splunk for nmap and think I might be close... Example full line: Host: 10.0.0.1 (host) Ports: 21/open|filtered/tcp//ftp///, 22/open/tcp//ssh//OpenSSH 5.9p1 Debian 5ubuntu1 (protocol 2.0)/, 23/closed/tcp//telnet///, 80/open/tcp//http//Apache httpd 2.2.22 ((Ubuntu))/, 10000/closed/tcp//snet-sensor-mgmt/// OS: Linux 2.6.32 - 3.2 Seq Index: 257 IP ID Seq: All zeros I've used underscore "_" as the delimiter because it makes it a little easier to read. root@host:/# sed -n -e 's_\([0-9]\{1,5\}\/[^/]*\/[^/]*\/\/[^/]*\/\/[^/]*\/.\)_\n\1_pg' filename The same regex with the escape characters removed: root@host:/# sed -n -e 's_\([0-9]\{1,5\}/[^/]*/[^/]*//[^/]*//[^/]*/.\)_\n\1_pg' filename Output: ... ... ... Host: 10.0.0.1 (host) Ports: 21/open|filtered/tcp//ftp///, 22/open/tcp//ssh//OpenSSH 2.0p1 Debian 2ubuntu1 (protocol 2.0)/, 23/closed/tcp//telnet///, 80/open/tcp//http//Apache httpd 5.4.32 ((Ubuntu))/, 10000/closed/tcp//snet-sensor-mgmt/// OS: Linux 9.8.76 - 7.3 Seq Index: 257 IPID Seq: All zeros ... ... ... As you can see, the pattern matching appears to be working - although I am unable to: 1 - match on both the end of line ( comma , and white/tabspace). The last line contains unwanted text (in this case, the OS and TCP timing info) and 2 - remove any of the un-necessary data - i.e. print only the matching pattern. It is actually printing the whole line. If i remove the sed -n flag, the remaining file contents are also printed. I can't seem to locate a way to only print the matched regex. Being fairly new to sed and regex, any help or pointers is greatly appreciated!

    Read the article

  • postfix smtpd rejecting mail from outside network match_list_match: no match

    - by Loopo
    My postfix (V: 2.5.5-1.1) running on ubuntu server (9.04) started to reject mail arriving in from outside about 2 weeks ago. Doing a "manual" session via telnet shows that the connection is always closed after the MAIL FROM: [email protected] line is input, with the message "Connection closed by foreign host." Doing the same from another client inside the LAN works fine. In the log files I get the line "lost connection after MAIL from xxxxx.tld[xxx.xxx.xxx.xxx]" This is after some lines like: match_hostaddr: XXX.XXX.XXX.XXX ~? [::1]/128 match_hostname: XXXX.tld ~? 192.168.1.0/24 ... match_list_match: xxx.xxx.xxx.xxx: no match which seem to suggest some kind of filter which checks for allowed addresses. I have been unable to locate where this filter lives, or how to turn it off. I'm not even sure if that's what's causing my problem. Connections from inside the LAN don't get disconnected even though they also show a "match_list_match: ... no match" line. I didn't change any configuration files recently, below is my main.cf as it currently stands. I don't really know what all the parameters do and how they interact. I just set it up initially and it worked fine (up to recently). smtpd_banner = $myhostname ESMTP $mail_name (GNU) biff = no readme_directory = no # TLS parameters smtpd_tls_cert_file=/etc/ssl/certs/server.crt smtpd_tls_key_file=/etc/ssl/private/server.key #smtpd_use_tls=yes smtpd_tls_session_cache_database = btree:${data_directory}/smtpd_scache smtp_tls_session_cache_database = btree:${data_directory}/smtp_scache smtp_sasl_auth_enable = no smtp_use_tls=no smtp_sasl_password_maps = hash:/etc/postfix/smtp_auth myhostname = XXXXXXX.com alias_maps = hash:/etc/aliases alias_database = hash:/etc/aliases myorigin = /etc/mailname mydestination = XXXX.XXXX.com, XXXX.com, localhost.XXXXX.com, localhost relayhost = XXX.XXX.XXX.XXX mynetworks = 127.0.0.0/8 [::ffff:127.0.0.0]/104 [::1]/128 192.168.1.0/24 mailbox_command = procmail -a "$EXTENSION" mailbox_size_limit = 0 recipient_delimiter = + inet_interfaces = all smtpd_sasl_local_domain = #smtpd_sasl_auth_enable = yes smtpd_sasl_security_options = noanonymous smtpd_sasl_authenticated_header = yes broken_sasl_auth_clients = yes smtpd_recipient_restrictions = permit_mynetworks,permit_sasl_authenticated,reject_unauth_ when checking the process list, postfix/smtpd runs as smtpd -n smtp -t inet -u -c -o stress -v -v Any clues?

    Read the article

  • Netgear GS724Tv3 and link aggregation Mac OS X Server 10.6.8

    - by Manca Weeks
    I need to link aggregate 2 sets of ports on the Netgear GS724T with my Apple server tower (latest generation). I have 2 built in ports and 2 ports on a PCIe ethernet card. It is not obvious to me how to properly configure the Netgear end. I have access to the Netgear box through its web interface, just don't know how to properly set the settings. I tried going to Netgear for help, but they said my software support has expired. I bought this unit on their recommendation - they say it is compatible with 802.3ad protocol. I cannot locate any references to this protocol in the manual and I noticed some people in formus say that this device is actually not compatible with 802.3ad and that Netgear is misleading potential customers by saying it is. Any help will be appreciated. Thanks, M My own answer - posted as edit because of restrictions on my user: OK folks, turns out one must use a Windows machine on this one or nothing makes sense. I was unable to get much farther than viewing the default inactive LAGs because in Firefox and Safari on Mac things don't make much sense - i.e. the Apply buttons (supposedly JavaScript) don't work. You can view the configurations, but none of the modifications you make stick. Then, in Switching - LAGs, choose the ports to include and make sure you switch the LAG type from Static to LACP and all is well. Haven't tested the performance of the config yet, but both sides appear to be happy with the configuration. Apple server says link active and so does the Netgear. Will report if any other discoveries. Thanks for all who read and to user84104 for responding. M

    Read the article

  • Disable XP disk check using FAT32

    - by mike xie
    Right now I'm using Windows XP and Macintosh on my MacBook Pro via Bootcamp. Sometimes my XP would crash and when I restarted it it would have to go through disk check, although it says I can skip it by pushing a key, but this never worked for me. I did a bit of research online on how to disable disk check and found chkntfs /x c: but when I tried this out in my cmd it said the disk is FAT32 format. I tried to convert my C: drive from FAT32 to NTFS by using convert c: /FS:NTFS but when I tried this it told me to locate my C: drive. I tried to type C: and Bootcamp but couldn't really get past it. I later saw someone said to use this: Windows Registry Editor Version 5.00 [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager] "AutoChkTimeOut"=dword:0000000 [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager] "BootExecute"=hex(7):61,00,75,00,74,00,6f,00,63,00,68,00,65,00,63,00,6b,00,20,\ 00,61,00,75,00,74,00,6f,00,63,00,68,00,6b,00,20,00,2a,00,00,00,00,00 [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon] "SFCScan"=dword:00000000 [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\MyComputer\cleanuppath] @=hex(2):25,00,53,00,79,00,73,00,74,00,65,00,6d,00,52,00,6f,00,6f,00,74,00,25,\ 00,5c,00,73,00,79,00,73,00,74,00,65,00,6d,00,33,00,32,00,5c,00,63,00,6c,00,\ 65,00,61,00,6e,00,6d,00,67,00,72,00,2e,00,65,00,78,00,65,00,20,00,2f,00,44,\ 00,20,00,25,00,63,00,00,00 (Save it as .reg and execute it) I have just tried running it but am not really sure if it did anything (my laptop hasn't crashed yet :) ) Firstly, I am wondering if someone can tell me how to check if that script worked? Secondly, if that script didn't work, does anyone have any solution for these problems? Is there another way to disable disk check or is there another way for me to change my FAT32 to NTFS?

    Read the article

  • Formatted C: from Windows 7 setup, now it won't even install

    - by ocurro
    Help, I'm so confused. I did more or less what's been described here: I formatted Vista and installed Windows 7 over it. Problem is that I'm now unable to boot (...) [1] I'm installing Seven on top of Vista on ACER AS1410 Notebook When it comes to the part where I choose where to install, I pick the partition labeled C: but instead of keeping windows.old files (what would I want them for?) I choose to go and carelessly format the partition (my bad). It shows me this error: Setup was unable to create a new system partition or locate an existing system partition. See the Setup log files for more information Now the only option is "Load Driver". i have tried installing every single one from ACER website, none of them are useful. I even flashed orig. BIOS. I've tried going back and choose "Repair" like in the picture:[2] but I only get an error: "Failed to save startup options" I think this is weird, what else can I do? [1] superuser.com/questions/117076/formatting-of-an-xp-vista-dual-boot-machine-now-unable-to-boot-up-xp [2] www.howtogeek.com/wp-content/uploads/2007/08/image51.png

    Read the article

< Previous Page | 34 35 36 37 38 39 40 41 42 43 44 45  | Next Page >