Search Results

Search found 2794 results on 112 pages for 'peu ping'.

Page 38/112 | < Previous Page | 34 35 36 37 38 39 40 41 42 43 44 45  | Next Page >

• RPC Server Unavailable When Trying to Join W2003 Server to W2003 Active Directory Domain

  - by Roel Vlemmings

  I have an Active Directory Domain with a Windows 2003 Standard SP2 Server as the DC. When trying to join an additional Windows 2003 Standard SP2 server to the domain I get message "The following error occurred attempting to join the domain 'My Domain'. The RPC Server is unavailable. The computer is actually added to the Active Directory Computers. I can even right-click and Manage it. I can access file shares from the DC on the other server and vice versa. I can ping the DC from this server and ping the server from the DC using the computer name. The time on both server is the same more or less to the second. RPC service is running on both servers. I can join other computers to the domain and there are no other issues with the domain. Windows Firewall disabled on both computers. NetSetup.LOG shows: NetpSetNetloginDomainCache: DSEnumerateDomainTrustsW failed 0x6ba I looked up this WIN32 Error Code: It is RPC_S_SERVER_UNAVAILABLE.

  Read the article

• Windows host MIA on network

  - by andrewbadera

  I've had a machine effectively disappear off my home office network. 192.168.1.100 - Windows 7 laptop (on domain) - problem machine 192.168.1.42 - Windows 2008 server (domain controller) 192.168.1.101 - Windows 7 laptop (guest; not on domain) For some reason I am unable to ping, tracert or remote desktop to 192.168.1.100 from .42 or .101. I can remote between .42 and .101 no problem however. .100 cannot ping nor remote desktop to .42 or .101. Remote Desktop access is enabled on .100. I've opened the firewall rules. I've disabled the firewall domain profile. I've turned the firewall service off entirely. No matter what I do, the .100 host is unreachable by any other host on the network. I'm at my wit's end. Thanks in advance for any debug advice!

  Read the article

• Problems using PC as a media server with PS3

  - by Tiger

  I recently got a PS3 and decided to take advantage of the fact that it can be used to stream movies by making my PC a media server. I've done this in the past with the same router I have now before I sold my old PS3, but not on this PC. I've tried using both Tversity and PS3 Media server, but I don't think the problem lies within the configuration of either of those programs because I am unable to ping the PS3. This problem only occurs when I am using a wired connection on my pc, attempting to connect to a WLAN connection on the PS3. If I switch to WLAN on my PC I can successfully ping the PS3 and connect to the media server. Thanks

  Read the article

• Combo ports and SFP

  - by Tahir

  I have Netgear GSM7324s prosafe switch. Switch has 24x1G ports. 4 ports are labeled as combo ports while 2 are labeled as SFP ports. I connected 2 PCs (each having 1gig and 10Gig NICs), with the switch using 1 & 10 Gig cables. Whenever, I ping the PCs the pinging is not working. As soon as, I removed the 10G cables, the ping starts working. Can someone please explain that what's going on. Also it would be very helpful if you can tell me the concept of combo ports, SFP ports in easy words?

  Read the article

• Ubuntu Server UFW NAT Issues

  - by William Fleming

  *nat :POSTROUTING ACCEPT [0:0] -A POSTROUTING -s 10.8.0.0/24 -o eth0 -j MASQUERADE -A ufw-before-input -i tun0 -j ACCEPT -A ufw-before-output -i tun0 -j ACCEPT -A ufw-before-forward -s 10.8.0.0/24 -j ACCEPT -A ufw-before-forward -d 10.8.0.0/24 -j ACCEPT This input into my before.rules file stops me being able to ping the outside world. Before its fine i can ping google.co.uk after cant get out. Is there something wrong in my syntax here or what is the issue...? Im just trying to NAT my VPN so i can get internet access. Any thoughts would be greatly appreciated. Thanks William

  Read the article

• Cluster failover and strange gratuitous arp behavior

  - by lazerpld

  I am experiencing a strange Windows 2008R2 cluster related issue that is bothering me. I feel that I have come close as to what the issue is, but still don't fully understand what is happening. I have a two node exchange 2007 cluster running on two 2008R2 servers. The exchange cluster application works fine when running on the "primary" cluster node. The problem occurs when failing over the cluster ressource to the secondary node. When failing over the cluster to the "secondary" node, which for instance is on the same subnet as the "primary", the failover initially works ok and the cluster ressource continues to work for a couple of minutes on the new node. Which means that the recieving node does send out a gratuitous arp reply packet that updated the arp tables on the network. But after x amount of time (typically within 5 minutes time) something updates the arp-tables again because all of a sudden the cluster service does not answer to pings. So basically I start a ping to the exchange cluster address when its running on the "primary node". It works just great. I failover the cluster ressource group to the "secondary node" and I only have loss of one ping which is acceptable. The cluster ressource still answers for some time after being failed over and all of a sudden the ping starts timing out. This is telling me that the arp table initially is updated by the secondary node, but then something (which I haven't found out yet) wrongfully updates it again, probably with the primary node's MAC. Why does this happen - has anyone experienced the same problem? The cluster is NOT running NLB and the problem stops immidiately after failing over back to the primary node where there are no problems. Each node is using NIC teaming (intel) with ALB. Each node is on the same subnet and has gateway and so on entered correctly as far as I am concerned. Edit: I was wondering if it could be related to network binding order maybe? Because I have noticed that the only difference I can see from node to node is when showing the local arp table. On the "primary" node the arp table is generated on the cluster address as the source. While on the "secondary" its generated from the nodes own network card. Any input on this? Edit: Ok here is the connection layout. Cluster address: A.B.6.208/25 Exchange application address: A.B.6.212/25 Node A: 3 physical nics. Two teamed using intels teaming with the address A.B.6.210/25 called public The last one used for cluster traffic called private with 10.0.0.138/24 Node B: 3 physical nics. Two teamed using intels teaming with the address A.B.6.211/25 called public The last one used for cluster traffic called private with 10.0.0.139/24 Each node sits in a seperate datacenter connected together. End switches being cisco in DC1 and NEXUS 5000/2000 in DC2. Edit: I have been testing a little more. I have now created an empty application on the same cluster, and given it another ip address on the same subnet as the exchange application. After failing this empty application over, I see the exact same problem occuring. After one or two minutes clients on other subnets cannot ping the virtual ip of the application. But while clients on other subnets cannot, another server from another cluster on the same subnet has no trouble pinging. But if i then make another failover to the original state, then the situation is the opposite. So now clients on same subnet cannot, and on other they can. We have another cluster set up the same way and on the same subnet, with the same intel network cards, the same drivers and same teaming settings. Here we are not seeing this. So its somewhat confusing. Edit: OK done some more research. Removed the NIC teaming of the secondary node, since it didnt work anyway. After some standard problems following that, I finally managed to get it up and running again with the old NIC teaming settings on one single physical network card. Now I am not able to reproduce the problem described above. So it is somehow related to the teaming - maybe some kind of bug? Edit: Did some more failing over without being able to make it fail. So removing the NIC team looks like it was a workaround. Now I tried to reestablish the intel NIC teaming with ALB (as it was before) and i still cannot make it fail. This is annoying due to the fact that now i actually cannot pinpoint the root of the problem. Now it just seems to be some kind of MS/intel hick-up - which is hard to accept because what if the problem reoccurs in 14 days? There is a strange thing that happened though. After recreating the NIC team I was not able to rename the team to "PUBLIC" which the old team was called. So something has not been cleaned up in windows - although the server HAS been restarted! Edit: OK after restablishing the ALB teaming the error came back. So I am now going to do some thorough testing and i will get back with my observations. One thing is for sure. It is related to Intel 82575EB NICS, ALB and Gratuitous Arp.

  Read the article

• DNS on Redhat - rdnc: no server specified and no default

  - by Syahmul Aziz

  Hi all. The error as shown in the 2 pictures below: The configurations for named.conf and the zones files as shown below: After applying "alveso" suggestion below. Now, I think there is no error but I still can't ping my own domain www.p0864868.com (10.0.0.1) nor can I do host or nslookup as shown on previous pictures. PLease assist. Thank you in advance. I also attached my the changes that I made to my named.conf as well as my resolve.conf configs as shown below: progress 2: turned on logging by typping "rndc queylog" The output as below when I pinged p0864868.com progress 3: changed permission of 10-0-0.zone and p086868.zone to 644 named:named Still can't ping www.p0864868.com or execute host command. It says something like network unreachable. I don't understand why it refer to I don't what address is that.

  Read the article

• Dell Dimension running Fedora12 does a "Sleeping Beauty" and I am not am not a "handsome prince"!

  - by Jim Dobbs

  Dell Dimension 2350 with a Pentium IV processor and integrated video and network chips running Fedora12 does a "Sleeping Beauty" and I, apparently, am not am not a "handsome prince"! The system puts video and network to sleep and it will not wakeup. I have heard of this problem on laptops, but this is a tower. Any ideas or help is appreciated. I tried to ping the network card from another system and ping fails. The logs indicate that the system continues to be active. Pressing keyboard short-cut keys makes the disk light blink but neither the video or network card comes alive. Failing all else, are there any Linux commands that I could schedule in cron to pulse video and network adapters hourly that will keep them awake? Or, should I wait on Fedora13? Before this machine, I built a Dimension 2400 with Pentium IV and it had the same problem. Fedora9 on the same hardware is fine.

  Read the article

• How to configure remote access to multiple subnets behind a SonicWALL NSA 2400

  - by Kyle Noland

  I have a client that uses a SonicWALL NSA 2400 as their firewall. I need to setup a second LAN subnet for a handful of PC. Management has decided that there should be a second subnet even though intend to allow access across the two subnets - I know... I'm having trouble getting communication across the 2 subnets. I can ping each gateway, but I cannot ping or seem to route traffic fron subnet A to subnet B. Here is my current setup: X0 Interface: LAN zone with IP addres 192.168.1.1 X1 Interface: WAN zone with WAN IP address X2 Interface: LAN zone with IP address 192.168.75.1 I have configured ARP and routes for the secondar subnet (X2) according to this SonicWALL KB article: http://www.sonicwall.com/downloads/supporting_multiple_firewalled_subnets_on_sonicos_enhanced.pdf using "Example 1". At this point I don't minding if I have to throw the SonicWALL GVC software VPN client into the mix to make it work. It feel like I have an Access Rule issue, but for testing I made LAN LAN, WAN LAN and VPN LAN rules wide open with the same results.

  Read the article

• Static Route Qestion

  - by mrlayance

  I have a Wan simulator between 2 networks. I can ping both networks from the wan simulator, but I can not ping from one network to the other. testr01 Fa0/0 10.0.0.1/24 FA0/1 192.168.0.1/30 | | Wan Sim 2 nics Eth0 192.168.0.2/30 | Eth1 192.168.1.2/30 | | testr02 Fa0/1 192.168.1.1/30 Fa0/0 10.1.0.2/24 I can not figure out what type of routes I need. On the route? On the Server? I guess all 10. traffic to the Fa0/0 ports? Thanks

  Read the article

• debian gateway using iptables

  - by meijuh

  I am having problems setting up a debian gateway server. My goal: Having eth1 the WAN interface. Having eth0 the LAN interface. Allow both ports 22 (SSH) and 80 (HTTP) accessed from the outside world on the gateway (SSH and HTTP run on this server). What I did was the following: Create a file /etc/iptables.rules with contents: /etc/iptables.rules: *nat -A POSTROUTING -o eth1 -j MASQUERADE COMMIT *filter -A INPUT -i lo -j ACCEPT -A INPUT -m state --state RELATED,ESTABLISHED -j ACCEPT -A INPUT -i eth1 -p tcp -m tcp --dport 22 -j ACCEPT -A INPUT -i eth1 -p tcp -m tcp --dport 80 -j ACCEPT -A INPUT -i eth1 -j DROP COMMIT edit /etc/network/interfaces as follows: /etc/network/interfaces: # The loopback network interface auto lo iface lo inet loopback pre-up iptables-restore < /etc/iptables.rules auto eth0 allow-hotplug eth0 iface eth0 inet dhcp #auto eth1 #allow-hotplug eth1 #iface eth1 inet dhcp allow-hotplug eth1 iface eth1 inet static address 217.119.224.51 netmask 255.255.255.248 gateway 217.119.224.49 dns-nameservers 217.119.226.67 217.119.226.68 Uncomment the rule net.ipv4.ip_forward=1 in /etc/sysctl.conf to allow packet forwarding. The static settings for eth1 such as the ip address I got from my router (which I want to replace); I simply copied these. I have a (windows) DNS + DHCP server on ip address 10.180.1.10, which assigns ip address 10.180.1.44 to eth0. What this server does is not really interesting it only maps domain names on our local network and assigns one static ip to the gateway. What works: on the gateway itself I can ping 8.8.8.8 and google.nl. So that is okey. What does not work: (1) Every machine connected to eth0 (indirectly via a switch) can not ping an ip or a domain. So I guess the gateway can not be found. (2) Also when I configure my linux machine (a laptop) to use a static ip 10.180.1.41, a mask and a gateway (10.180.1.44) I can not ping an ip or domain either. This means that maybe my iptables is incorrect of not loaded correctly. Or I maybe have to configure my DNS/DHCP on my windows machine. I have not reset the windows machine net, restart the DNS/DHCP services, should I do this? I did not install dnsmasq as desribed here: http://blog.noviantech.com/2010/12/22/debian-router-gateway-in-15-minutes/. I don't think this is necessary?

  Read the article

• VM can't connect to outside in bridged mode

  - by Kamal

  Hi Guys, I am not able to ping any machine(not even the host) from Guest VM in bridged mode. But I got an IP which is on the same subnet as host. I can ping my guest VM from the host and can use ssh to connect to the guest. I am using Vmware workstation 6.5. Guest VM is a centos VM and host is windows xp. Every thing works fine in NAT mode. Any clues as to what could be happening. I tried disabling all the firewalls I have.

  Read the article

• strange behaviour - dhclient needs to be run twice in order to connect to wireless

  - by splicer

  I am trying to connect my to my wlan without the use of NetworkManager. I run the following commands after boot: iwconfig wlan0 enc <WEP passwd> mode managed essid <name> channel 6 ifconfig wlan0 up dhclient wlan0 At this point, dhclient stalls for ages (perhaps 2 minutes), then it returns with PING 192.168.1.254 (192.168.1.254) from 192.168.1.65 wlan0: 56(84) bytes of data. --- 192.168.1.254 ping statistics --- 3 packets transmitted, 0 received, +3 errors, 100% packet loss, time 3000ms pipe 3 .. The strange thing is that when I run pkill dhclient; dhclient wlan0 right after this, it connects in about <3 seconds. Any idea what could be the cause of this problem? Edit: oh, and I did try using the -timeout flag on dhclient but that didn't seem to make any difference (it still stalled for ages).

  Read the article

• Dell Dimension running Fedora12 does a "Sleeping Beauty" and I am not a "handsome prince"!

  - by Jim Dobbs

  Dell Dimension 2350 with a Pentium IV processor and integrated video and network chips running Fedora12 does a "Sleeping Beauty" and I, apparently, am not am not a "handsome prince"! The system puts video and network to sleep and it will not wakeup. I have heard of this problem on laptops, but this is a tower. Any ideas or help is appreciated. I tried to ping the network card from another system and ping fails. The logs indicate that the system continues to be active. Pressing keyboard short-cut keys makes the disk light blink but neither the video or network card comes alive. Failing all else, are there any Linux commands that I could schedule in cron to pulse video and network adapters hourly that will keep them awake? Or, should I wait on Fedora13? Before this machine, I built a Dimension 2400 with Pentium IV and it had the same problem. Fedora9 on the same hardware is fine.

  Read the article

• Dell Dimension 2350 with a Pentium IV processor and integrated video and network chips running Fedor

  - by Jim Dobbs

  Dell Dimension 2350 with a Pentium IV processor and integrated video and network chips running Fedora12 does a "Sleeping Beauty" and I, apparently, am not am not a "handsome prince"! The system puts video and network to sleep and it will not wakeup. I have heard of this problem on laptops, but this is a tower. Any ideas or help is appreciated. I tried to ping the network card from another system and ping fails. The logs indicate that the system continues to be active. Pressing keyboard short-cut keys makes the disk light blink but neither the video or network card comes alive. Failing all else, are there any Linux commands that I could schedule in cron to pulse video and network adapters hourly that will keep them awake? Or, should I wait on Fedora13? Before this machine, I built a Dimension 2400 with Pentium IV and it had the same problem. Fedora9 on the same hardware is fine.

  Read the article

• Are random packets normal?

  - by TheLQ

  About a month ago on one of my servers I started receiving random packets from IPs all over the world. So I did the smart thing and stopped putting off installing an IDS. This IDS is a ClearOS Gateway which comes with Snort and SnortSam. I enabled it, checked There is a total of 4 ports open, two of which forward to the server I'm talking about. These ports are 3724 and 8085, so they aren't going to be easily detected in a port scan. However checking some logs of this server I found that the attack is resuming. I found this ... Accepting connection from '75.166.155.122' [Auth] got unknown packet from '75.166.155.122' Accepting connection from '98.164.154.93' [Auth] got unknown packet from '98.164.154.93' Ping MySQL to keep connection alive Accepting connection from '70.241.195.129' [Auth] got unknown packet from '70.241.195.129' Accepting connection from '67.182.229.169' [Auth] got unknown packet from '67.182.229.169' Accepting connection from '69.137.140.38' [Auth] got unknown packet from '69.137.140.38' Accepting connection from '76.31.72.55' [Auth] got unknown packet from '76.31.72.55' Accepting connection from '97.88.139.39' [Auth] got unknown packet from '97.88.139.39' Accepting connection from '173.35.62.112' [Auth] got unknown packet from '173.35.62.112' Accepting connection from '187.15.10.73' [Auth] got unknown packet from '187.15.10.73' Accepting connection from '66.66.94.124' [Auth] got unknown packet from '66.66.94.124' Accepting connection from '75.159.219.124' [Auth] got unknown packet from '75.159.219.124' Accepting connection from '99.102.100.82' [Auth] got unknown packet from '99.102.100.82' Accepting connection from '24.128.240.45' [Auth] got unknown packet from '24.128.240.45' Accepting connection from '99.231.7.39' [Auth] got unknown packet from '99.231.7.39' Accepting connection from '206.255.79.56' [Auth] got unknown packet from '206.255.79.56' Accepting connection from '68.97.106.235' [Auth] got unknown packet from '68.97.106.235' Accepting connection from '69.134.67.251' [Auth] got unknown packet from '69.134.67.251' Accepting connection from '63.228.138.186' [Auth] got unknown packet from '63.228.138.186' Accepting connection from '184.39.146.193' [Auth] got unknown packet from '184.39.146.193' Accepting connection from '69.171.161.102' [Auth] got unknown packet from '69.171.161.102' Accepting connection from '76.0.47.228' [Auth] got unknown packet from '76.0.47.228' Ping MySQL to keep connection alive Accepting connection from '126.112.201.14' [Auth] got unknown packet from '126.112.201.14' Ping MySQL to keep connection alive Now that scares me. Why isn't Snort detecting this? How were they able to find this specific port? More importantly, what normally would these packets contain? Is this something I should be worried about? How can I stop this?

  Read the article

• DNS NS and domain clarification

  - by thejartender

  I am really trying to get my home web server up and I don't seem to be succeeding. My web server withing my host system is running my web application and is viewable at the current isp ip 88.89.190.171 over WAN indicating that the webapp is fine and that router ports are forwarded. I have set up a DNS on this system with a single name server in the network and I manage to ping it with ping ns.thejarbar.org I have registered this private name server at my current hosting provider. My domain (thejarbar.org) is obviously registered and I have pointed it to my name server. My question here is if it is simply a matter of waiting on propagation for me to be able to ping my domain? Another way of asking this is if the fact that my name server is discoverable indicates that I have set it up correctly to be used? I have tested with dig and dig -x on my host and have A records for the name server. The server is not the Authorative server so I am concerned that this may be the reason why my site is not discoverable. Is there anything else I may need to so still? I only have one ns. currently, but should this succeed I will be purchasing a more stable secondary system to host my development applications. This is my best chance at getting work (freelance development) due to illness) and this I feel is the last step I need to succeed. Please note that this is temporarily a home server and I will most likely be using it as part of a professional setup very soon I will likely have to repeat this question therefore in a prefessional context in a few weeks as nothing will be different other than the fact that I am going to have a server running elsewhere. I am using bind9 and Ubuntu 12.10 and my records are: $TTL 3D @ IN SOA ns.thejarbar.org. email. ( 13112012 28800 3600 604800 38400 ); thejarbar.org. IN A 10.0.0.42 @ IN NS ns.thejarbar,org. yuccalaptop IN A 10.0.0.19 ns IN A 10.0.0.42 gw IN A 10.0.0.138 www IN CNAME thejarbar.org. $TTL 3D 0.0.10.in-addr.arpa. IN SOA ns.thejarbar.org. email. ( 13112012 28800 3600 604800 38400 ); 0.0.10.in-addr.arpa. IN NS ns.thejarbar.org. 42 IN PTR thejarbar.org. 19 IN PTR yuccalaptop.thejarbar.org. 138 IN PTR gw.thejarbar.org. My localhost IP is 10.0.0.42 I wish for this to be my host and name server.

  Read the article

• Possible to get OpenDNS to dereference Host on VPN?

  - by Scott P

  I recently changed ISPs for my home internet. I am now having some trouble getting back into the corporate network from home over the VPN. I have figured out the OpenDNS is resolving the Hosts on the VPN incorrectly when I am using TCP/IP. When I browse to one of the hosts on corporate network, i.e. \host1, from the file manager this succeeds. However, when I ping the host, i.e. ping host1, the IP address is resolving to the OpenDNS name server instead of the actual Host IP address. Does anyone know how to make this work? On a hunch, I turned off type correction. But, this did not help.

  Read the article

• 'server was unable to allocate from the system nonpaged pool' error

  - by cop1152

  Currently users at my company are unable to access their home folder (or any folder on our domain controller). I am working remotely and cant physically access the machine until tomorrow morning, but I can access it with RDC. When I attempt to ping other machines on our network from the machine in question (connected with RDC), I immediately get the error PING: transmit failed. error code 1450. Event Viewer is full of 2019 errors: The server was unable to allocate from the system nonpaged pool because the pool was empty Does anyone have experience with this specific issue? I have found some info with Google, but would like to hear what the pros at SF have top say. This is a Windows 2000 server.

  Read the article

• routing traffic between two network cards through firewall

  - by RubyFreak

  I'm trying to test a network device (firewall) using a Linux box, with two network cards, one interface connected to the WAN zone and another interface to LAN zone. The configuration is similar with that |ETH0| <-> | FW | <-> ETH1 So from both interfaces I'm able to ping the respective firewall interface. But i'm not able to fire something like: ping -I eth0 ip.from.eth1 and to get any answer. Is that possible or should the linux network namespace solution or user level tcp stacks (VMs are out of question)

  Read the article

• Server 2008 won't run executables from CMD prompt without .exe extension

  - by Dan

  On one of our production server 2008 boxes, I cannot run executables from a CMD prompt without supplying the full filename, including the '.exe' extension. For example, when running "java" produced the usual "is not recognized as an internal or external command" message, I assumed I had borked the path and/or java_home variables. However, even navigating to the %java_home%\bin directory and typing "java" produced the same error. If I type "java.exe" instead, all works perfectly. The problem does not only affect java.exe. Even Microsoft executables suffer the same problem -- ping fails, ping.exe works; ipconfig fails, ipconfig.exe works; manually created batch file 'test' only works when invoked explicitly as 'test.bat'. Any bright ideas?

  Read the article

• Basic networking: Centos Server Router + Ubuntu Client setup.. unable to access outside world from client

  - by ale

  I am trying to set up my Centos Server with two NICs as a router. eth0 is connected to the outside world and eth1 is connected to an Ubuntu client. Here's eth0 on the server: DEVICE=eth0 BOOTPROTO=dhcp ONBOOT=yes TYPE=Ethernet eth1 on the server: DEVICE=eth1 BOOTPROTO=static IPADDR=192.168.0.10 # a free address on my network ONBOOT=yes TYPE=Ethernet My server has IPv4 packet forwarding turned on and my iptables only contains: # iptables --table nat --append POSTROUTING --out-interface eth0 -j MASQUERADE # iptables --append FORWARD --in-interface eth1 -j ACCEPT My Ubuntu client has this in its /etc/network/interfaces auto lo iface lo inet loopback iface eth0 inet dhcp gateway 192.168.0.10 but I can't get an Internet connection from the server for my client. I can't even ping my server from the client: $ ping 192.168.0.10 Destination Host Unreachable

  Read the article

• WSUS is not using Akamai CDN for syncronisation source

  - by Geekman

  I've just installed a WSUS onto our network, and I'm currently doing the initial sync. I've found that WSUS does not seem to be talking to an Akamai cache, but rather with MS directly. This is contrary to what I've always thought regarding Windows Update traffic. Tcpdump of our WSUS server doing initial sync... As you can see it's speaking with 65.55.194.221. For me to speak to this IP, I have to go over international transit links. Which is of course not ideal. 8:42:31.279757 IP 65.55.194.221.https > XXXX.XXXX.XXXX.XXXX.50888: Flags [.], seq 4379374:4380834, ack 289611, win 256, length 1460 18:42:31.279759 IP 65.55.194.221.https > XXXX.XXXX.XXXX.XXXX.50888: Flags [.], seq 4380834:4382294, ack 289611, win 256, length 1460 18:42:31.279762 IP 65.55.194.221.https > XXXX.XXXX.XXXX.XXXX.50888: Flags [.], seq 4382294:4383754, ack 289611, win 256, length 1460 18:42:31.279764 IP 65.55.194.221.https > XXXX.XXXX.XXXX.XXXX.50888: Flags [P.], seq 4383754:4384144, ack 289611, win 256, length 390 18:42:31.279793 IP XXXX.XXXX.XXXX.XXXX.50888 > 65.55.194.221.https: Flags [.], ack 4369154, win 23884, length 0 18:42:31.279888 IP XXXX.XXXX.XXXX.XXXX.50888 > 65.55.194.221.https: Flags [.], ack 4377914, win 23884, length 0 18:42:31.280015 IP XXXX.XXXX.XXXX.XXXX.50888 > 65.55.194.221.https: Flags [.], ack 4384144, win 23884, length 0 And yet, if I ping download.windowsupdate.com it seems to resolve to a local (national) Akamai node, just fine: root@some-node:~# ping download.windowsupdate.com PING a26.ms.akamai.net (210.9.88.48) 56(84) bytes of data. 64 bytes from a210-9-88-48.deploy.akamaitechnologies.com (210.9.88.48): icmp_req=1 ttl=59 time=1.02 ms 64 bytes from a210-9-88-48.deploy.akamaitechnologies.com (210.9.88.48): icmp_req=2 ttl=59 time=1.10 ms Why is this? And how can I change that (if possible)? I know that I can manually specify a WSUS source to sync with instead of pick the default MS Update like I currently have... But it seems like I shouldn't have to do this. NOTE: I've haven't confirmed if a WUA speaks with Akamai, just looking at WSUS as all WUAs will use our internal WSUS from now on. We'll be looking to join an IX shortly with the hopes of peering with an Akamai cache and have very fast access to Windows Updates. Before I let this drive my motivations for an IX at all I want to first confirm it's actually possible for WSUS to speak with an Akamai cache. I know this is somewhat networking related, but I feel like it has more to do with WSUS than anything, so someone who knows WSUS better than me will likely be able to figure this out.

  Read the article

• adding a route entry to linux routing table

  - by netg

  hi, I have two systems with ip address say 64.103.56.1(A)(Dev name -wlan0) and 64.103.225.18(B),now what i want is , everytime I ping B from my system A, it has to be routed via a router say with address 10.0.0.251(C)(I want this to be my next hop to reach B) , but this router is on a different subnetwork than the two systems.How do I do this? /* Things I tried: I used 'route add -host B gw C wlan0', and got an error saying " no such process exist or no such device found". Tried ping C and traceroute and found the gw addr at my side is some 63.103.236.3(D), so added another entry route add -host C gw D wlan0, I was able to do this without any error! */

  Read the article

• TTL and traceroute showing different values for same domain

  - by Cray XT3

  y am i getting two different output for tracert and ping. Ping Result showing total hops of 20 and tracert showing 8. default ttl value on my linux machine 64,icmp echo reply ttl value 44. 64-44=20 but tracert is showing only 8 hops. What can be the reason? If tracert is implemented using ttl then why am i getting different values for same domain.no matter how many times i tried. Fo google and google services,ttl value and tracrt are same,but for other domains its different.

  Read the article

< Previous Page | 34 35 36 37 38 39 40 41 42 43 44 45  | Next Page >