Search Results

Search found 1228 results on 50 pages for 'providers'.

Page 38/50 | < Previous Page | 34 35 36 37 38 39 40 41 42 43 44 45  | Next Page >

• IPv6 - Public IPs, private IPs, IPs derived from the MAC address? Confused!

  - by sinni800

  I'm pretty much excited for IPv6 because of the large address room and (potential?) owning of more than one IP, or even tens of IPs (/122 subnet?) Though one magazine has now confused me. In a current issue (no. 3) of "CT", a German computer magazine, I read that when using IPv6 your IP address consists of your MAC address and various other things, and that this address will be public on the web, no matter what access point / LAN you connect to. My knowledge of IP(v6) is in contrary of this. I thought you will normally always have a a local network IP and NAT takes care of your Internet access, and your provider gives the NAT router an IP. I've heard of the 6to4 interface, but does this one give you your own ip in the IPv6 net? Personally I hope it still is through a personal IP space (like 192.168, 127.16-31, 10. in IPv4) in private networks with a NAT going to the Internet. And also I hope that providers will offer subnets to private customers so they don't have to use NAT anymore. Yay for converting your LAN into the WAN and using better security (so Computers from the same subnet still get access rights like normal).

  Read the article

• Is there a way to change the string format for an existing CSR "Country Code" field from UTF8 to Printable String?

  - by Mike B

  CentOS 5.x The short version: Is there a way to change the encoding format for an existing CSR "Country Code" field from UTF8 to Printable String? The long version: I've got a CSR generated from a product using standard java security providers (jsse/jce). Some of the information in the CSR uses UTF8 Strings (which I understand is the preferred encoding requirement as of December 31, 2003 - RF 3280). The certificate authority I'm submitting the CSR to explicitly requires the Country Code to be specified as a PrintableString. My CSR has it listed as a UTF8 string. I went back to the latest RFC - http://www.ietf.org/rfc/rfc5280.txt. It seems to conflict specifically on countryName. Here's where it gets a little messy... The countryName is part of the relative DN. The relative DN is defined to be of type DirectoryString, which is defined as a choice of teletexString, printableString, universalString, utf8String, or bmpString. It also more specifically defines countryName as being either alpha (upper bound 2 bytes) or numeric (upper bound 3 bytes). Furthermore, in the appendix, it refers to the X520countryName, which is limited to be only a PrintableString of size 2. So, it is clear why it doesn't work. It appears that the certificate authority and Sun/Java do not agree on their interpretation of the requirements for the countryName. Is there anything I can do to modify the CSR to be compatible with the CA?

  Read the article

• HP Power Manager SMTP setup doesn't have space for username & password

  - by Martha

  Is there some way to configure HP Power Manager to not assume that there's an email server running locally? We recently acquired an HP T1500 G3 UPS, which we're trying to control using HP Power Manager 4.2. The main reason we wanted to get this particular UPS is because it says it's capable of sending notifications (of the "Yo, the power's out, you may want to look into it" type) via email, as opposed to SNMP. Turns out, that's not entirely true. The server is running Windows Server 2003. It is not running an email server of any sort - we do that via two different providers. Outlook email is provided by Verizon, and our SMTP email service is provided by a small local company. When we use CDO to send auto-generated notification emails, we have to provide the SMTP server name, port, username, and password. The HP Power Manager interface only allows us to enter the server name and the username. Thus, not surprisingly, the emails never go anywhere. Help?

  Read the article

• How far should we take the N+N redundancy craziness ?

  - by Brann

  The industry standard when it comes from redundancy is quite high, to say the least. To illustrate my point, here is my current setup (I'm running a financial service). Each server has a RAID array in case something goes wrong on one hard drive .... and in case something goes wrong on the server, it's mirrored by another spare identical server ... and both server cannot go down at the same time, because I've got redundant power, and redundant network connectivity, etc ... and my hosting center itself has dual electricity connections to two different energy providers, and redundant network connectivity, and redundant toilets in case the two security guards (sorry, four) needs to use it at the same time ... and in case something goes wrong anyway (a nuclear nuke? can't think of anything else), I've got another identical hosting facility in another country with the exact same setup. Cost of reputational damage if down = very high Probability of a hardware failure with my setup : <<1% Probability of a hardware failure with a less paranoiac setup : <<1% ASWELL Probability of a software failure in our application code : 1% (if your software is never down because of bugs, then I suggest you doublecheck your reporting/monitoring system is not down. Even SQLServer - which is arguably developed and tested by clever people with a strong methodology - is sometimes down) In other words, I feel like I could host a cheap laptop in my mother's flat, and the human/software problems would still be my higher risk. Of course, there are other things to take into consideration such as : scalability data security the clients expectations that you meet the industry standard But still, hosting two servers in two different data centers (without extra spare servers, nor doubled network equipment apart from the one provided by my hosting facility) would provide me with the scalability and the physical security I need. I feel like we're reaching a point where redundancy is just a communcation tool. Honestly, what's the difference between a 99.999% uptime and a 99.9999% uptime when you know you'll be down 1% of the time because of software bugs ? How far do you push your redundancy crazyness ?

  Read the article

• Sql Server 2005 Connection Unstable When Sharing Connection

  - by intermension

  When connecting to a customers hosting service via Sql Server Management Studio on an internet connection that also has other activity on it, the Sql Server connection to the hosting service is often dropped. An obvious work around to this problem is to NOT have additional traffic on the connection but it still begs the question "Why the Sql Server connection is so unstable?". If there is, for arguments sake, 100kb of bandwidth and a couple of downloads running that are being serviced at 35kB each then there is 30kB bandwidth spare capacity. If a 3rd download is started, that can be serviced at 35kB by the server, it will top out at 30kB and leave zero spare capacity. This is fine and all downloads get along nicely. However it seems that with Sql Server connections it doesn't matter if there is spare bandwidth. Sql Server regularly times out if there is any additional activity on the connection even if i have 1024kB spare bandwidth capacity. This has been experienced across different customer hosting providers over the years and so the assumption is that it's Sql Server related. Why does Sql Server (apparently) require exclusive access to the internet connection in order to maintain a connection... even if that connection has plenty of spare capacity over and above any additional activity on the connection?

  Read the article

• How does Tunlr work?

  - by gravyface

  For those of you not in the US, Tunlr uses DNS witchcraft to allow you to access US-only (and UK-only stuff like BBC radio online) services and Websites like Hulu.com, etc. without using traditional methods like a VPN or Web proxy. From their FAQ: Tunlr does not provide a virtual private network (VPN). Tunlr is a DNS (domain name system) unblocking service. We’re using sophisticated technologies (a.k.a. the Tunlr Secret Sauce ©) to re-adress certain data envelopes, tricking the receiver into thinking the envelope originated from within the U.S. For these data envelopes, Tunlr is transparently creating a network tunnel from your location to our U.S.-based servers. Any data that’s not directly related to the video or music content providers which Tunlr supports is not only left untouched, it’s also not even routed through Tunlr. In order to use Tunlr, you will have to change the DNS address. See Get started for more information. I can't really wrap my head around how this works; I have always assumed that these services performed a geolocation lookup via your client IP. Just really curious as to how this works. EDIT 2 I believe they're only proxying the initial geo check and then modifying the data stream request to include your real IP address so that the streaming is direct, not proxied.

  Read the article

• RouterLess, house-wired network using multiple powerline adapters

  - by Cliff Arnell

  related to the 'old days' of one ethernet cable tapped with Ts for each monitor.... my question might be very simple... or not. I have an over-the-air internet provider with a wire dish with a powered transceiver and cat5 cable out of the providers supplied modem. I'm presently connecting the output of the modem into my wireless router which sends the internet signal all over the house. Standard stuff, I believe. My Question. Can I just connect the output of the modem into 1 powerline adapter and tie all my equipment such as computer, printer, laptop, Tivo recorder, etc. into 1-each local powerline adapters located near each devices resulting in a 'house-wired' network and no router? I'm bothered by the idea that my over-the-air provider might be using something in my router to establish and keep my IP connection alive. I did have to configure the router for my IP, a router which, in my proposed scenario, would no longer exist. Thank you for your help.

  Read the article

• Recommend a UK based VPS host equivalent to Dreamhost [closed]

  - by Pez Cuckow

  I appreciate this question could be considered subjective and argumentative so can people make recommendations rather than arguing about the best. I believe the "correct" answer is the one closest to what I am looking for. Basically I live in the UK but have been using the US based Dreamhost for about 6 years now, and my web projects are getting to the scale where the websites need to the UK based to cope with the demand and load. I originally had shared hosting with Dreamhost but upgraded to a VPS a while ago, getting 512mb of RAM, unlimited disk space, bandwidth and domains for $30. Their control panel is a custom easy to use build that they have created in house and offers features very similar to other web panels (as far as I am aware). So basically my question boils down to, is there anywhere that offers an equivalent package? In all honesty as long as I have over 50gb HDD space and unlimited domains it doesn't really matter? Are there any VPS providers you would recommend as reliable? I promise to check every link posted, many thanks for your time!

  Read the article

• Can we do a DNSSEC 101? [closed]

  - by PAStheLoD

  Please share your opinions, FAQs, HOWTOs, best practices (or links to the one you think is the best) and your fears and thoughts about the whole migration (or should I just call it a new piece of tech?). Is DNSSEC just for DNS providers (name server operators)? What ought John Doe to do, who hosts johndoe.com at some random provider (GoDaddy, DreamHost and such)? Also, what if the provider's name server doesn't do automatic signing magic, can John do it manually? In a fire-and-forget way, without touching KSKs and ZSKs rollovers and updating and headaches?) Does it bring any change regarding CERT records? Do browsers support it? How come it became so complex? Why didn't they just merged it with SSL? DKIM is pretty straightforward, IANA/IETF could've opted for something like that. (Yes I know that creating a trust anchor would be still problematic, but browsers are already full of CA certs. So, they could've just let anyone get a cert for a domain for shiny green padlocks, or just generate one for a poor blue lock, put it into a TXT record, encrypt the other records and let the parent zone sign the whole for you with its cert.) Thanks! And for disclosure (it seemed like the customary thing to do around here), I've asked the same on the netsec subreddit.

  Read the article

• Restoring a fresh home folder in a shared user domain environment

  - by Cocoabean

  I am using a tool called pGINA that adds another credential provider to my Windows 7 clients so we can authenticate campus users via campus LDAP. We have the default Windows credential providers setup to authenticate off of our Active Directory, but we have students in our classes that don't have entries in our AD, and we need to know who they are to allow them internet access. Once these LDAP users login using pGINA, they are all redirected to the same AD account, a 'kiosk' account with GPOs in place to prevent anything malicious. My concern is that my users will accidentally save personal login information or files in that shared profile, and another user may login later and have access to a previous user's Gmail account, as the AppData folder on each computer is shared by anyone logging into the kiosk user. I've looked into MS's 'roll-your-own' SteadyState but it didn't seem to have what I wanted. I tried to write a PS script to copy a pre-saved clean version of the profile from a network share, but I just kept running into issues with CredSSP delegation and accessing the share from the UNC path. Others have recommended something like DeepFreeze but I'd like to do it without 3rd party tools if possible.

  Read the article

• Provider claiming "all web servers in the cloud are automatically kept in sync" - should I be skeptical?

  - by RobMasters

  I'm no expert in cloud computing - I've spent a fair bit of time researching it and various providers but am yet to get any hands-on experience with it. From what I've read about AWS and auto-scaling EC2 instances though, it seems as though each instance should be completely decoupled from all other instances. i.e. If content is uploaded to the web server's local filesystem from a custom CMS backend then that content won't be available if subsequently requested from a different web server in the auto-scaling group. Is that right? I met with a representative of our existing hosting provider recently and he was claiming that it isn't a problem that our legacy CMS system is highly dependent on having a local filesystem. He said that all web servers, regardless of how many, would be kept as exact duplicates so I shouldn't notice any difference compared to our existing setup of a single dedicated server. This smells a little too much like bull fecal-matter to me...should I be skeptical about this? I'm a little worried because my (non-technical) boss who ultimately makes the decisions is all for signing up to this cloud solution because it won't require any extra work. I'm sure that they must at least be able to provide this, otherwise they wouldn't be attempting to sell it to us. But at what cost? It sounds as though each web server will always need to be checking the other web server(s) for new static content, which to me sounds like unwanted overhead that'll slow things down. I'd really appreciate it if somebody could clear this up to me. I'm all for switching to AWS and using S3+CloudFront for all static content, but that isn't looking very likely to happen at the moment.

  Read the article

• Can Dovecot IMAP automatically create Maildir folders for new (virtual) users?

  - by user233441

  everyone. I am learning to set up a dovecot home IMAP server using a virtual Ubuntu 12.04 machine. My intention is eventually to have a home server that uses POP3 to take email from several addresses and remove them from my ISP's servers, while making them accessible through a home IMAP server (this is similar to the setup described at https://help.ubuntu.com/community/POP3Aggregator, which explains how to set up the system with dovecot version 1, and is thus outdated). I intend to use the ISP's server directly when sending messages, and to BCC all sent messages to myself. I've completed the basic set up of the test server: getmail uses POP3 to fetch messages from two test email accounts, and successfully delivers them to the respective Maildir-style new folders on the virtual machine. Dovecot then successfully sees these messages. I have two questions: 1) I had to set up new, cur, and tmp folders for both of the test accounts manually to get this setup to work. Is there a way to get dovecot to create these Maildir folders automatically when I create a new virtual user account (e.g., when I add a user and password combination to my dovecot password file), or is it expected that I write a bash script to automate that task? 2) I would welcome any comments you have on how this approach could be improved as I learn to set it up. My motivations with this approach are 1) to enable archiving/storing emails from several hosting providers that impose a cap on server storage, and 2) to give me somewhat greater control over email storage without requiring that I set up and administrate a mail server from scratch (which I'm not yet prepared to do) (this follows the recommendations at https://ssd.eff.org/tech/email). Thank you!

  Read the article

• I have bought a custom domain and am using it with Gmail. All My mail is being sent as spam. What can I do?

  - by Leonnears

  A while ago, I purchased my own custom domains for my websites. Before I moved them to Gmail, I just created the e-mails in my CPanel at Bluehost.com and worked from there. When the setup was like that, I could send and receive e-mail fine, and it wouldn't be marked as spam. Now I have moved these custom domains to send and receive e-mails at Gmail using Google apps. I have done everything. I have marked the domains as "Authorized" and I believe that should be enough for the mail I send with these custom e-mails is not send as spam. If it matters, I have configured my iPhone to use these custom domains with it and I'm sending all the e-mail from it. What can I do? I started doing all this today but apparently the DNS changes have already taken place. Is there something I have to do, or is it a matter of waiting 48 hours for my mail to not be marked as spam by other providers yet? EDIT: If I send mail via Gmail itself, the mail is delivered fine. If I use my iPhone however, it gets marked as spam.

  Read the article

• Watchguard Firebox "split" fibre optic line into 2 interfaces

  - by fRAiLtY-

  We have a requirement on our Watchguard Firebox XTM505 to be able to split our incoming external interface, in this case a fibre optic dedicated leased line, 100/100. We use the line in our office of approx 30 machines however we also re-sell to an external company who utilise it to provide wireless internet solutions to the public. The current infrastructure is as follows: Data in (Leased Line) - Juniper SRX210 managed by ISP - 1 cable out into unmanaged Netgear switch - 1 cable into our firewall and office network, 1 cable to our external providers core router managed by them. We have been informed that having the unmanaged switch in the position it is poses a security risk and that a good option would be to get our Watchguard Firewall to perform the split, by separating our office onto a trusted interface, and by "passing through" the external line to their managed router. It is alleged that the Watchguard is capable of doing this and also rate limiting the interfaces, i.e. 20mbps for the trusted interface and 80mbps for the "pass-through", however Watchguard technical support don't seem to be able to understand what we're trying to achieve. Can anyone provide any advice on whether this is possible on a Watchguard device and how or perhaps if there's a better way of achieving this, perhaps with a managed switch instead of unmanaged? Cheers

  Read the article

• Free blog sites where the blogs can (if the template does) validate as XHTML Strict 1.0?

  - by Deleted

  I'm looking for a site where I may register a free blog and have the blog validate as XHTML Strict 1.0. On the surface this may seem like a trivial problem only related to the theme/template in use, but that's unfortunately not the case. One example of a provider which can't fullfill this requirement is Blogger. Altough the pages of the blogs there presents themselfs as XHTML 1.0 Strict it is impossible to actually comply with the requirements inheritied by that markup type in the blog (as the XHTML which is generated by Blogger makes the page as a whole invalid). I've sent a mail to Tumblr to see if it was possible with them, but so far my reply consists of them having forwarded my mail with a "suggestion" to the development department. I don't know if we had a communication error or if I'm actually going to receive a proper answer later. Time will tell. I haven't had time to investigate Tumblr myself, so they may very well be the solution to this problem. To sum things up, I'm looking for any provider: Of a free blog. The blog must have the capability to validate as XHTML Strict 1.0. With capability I mean that the system shouldn't get in the way of creating/using a theme which complies as XHTML Strict 1.0. Preferably is large or at least likely to stay around for a couple of years to come. But I'm willing to take my chances if none of the established providers are up to the task. Thank you for reading! I hope you know of any provider which would be suitable, preferably with proof by linking to a blog there which validates. I'm not looking for suggestions to look into, as there are far to many to investigate and far too little time. If you know of something for sure, I'd be very happy to know about it.

  Read the article

• Receiving and processing SMS messages through a script?

  - by ShankarG

  I am attempting to setup a system to receive and process SMS messages automatically. The system is intended for use in a context (an unfunded migrant workers' union in India) where both finances and sysadmin skills are extremely constrained (I would be the only person, in the near future, who would be administering the system). The intention is to make some functions - registration of members, generation of ID cards, communication of alerts and other information - easier. However, for receiving and sending SMS, I have not been able to find any email to SMS or other kind of gateway that functions in India. Perhaps there is one (edit: apparently Clickatell does have an India service, but the prices appear astronomical). If not, can one rely on a USB mobile modem (such as those provided by many mobile providers in India)? It seems like, with utilities such as gammu or bitpim, SMS operations on such a modem could be scripted. Is this actually feasible, though? Thanks in advance for your thoughts and suggestions. edit: Original first question removed since the two questions had little to do with each other. The original first question has been asked separately here

  Read the article

• Issues with returned mail sent to web-based email domains

  - by Beeder

  My company is having issues with returned mail that we send out to external domains. A few weeks ago we replaced a firewall and changed ISP providers and began subsequently having issues RECEIVING emails from external sources because we hadn't updated our new IPs in the DNS records. After making the necessary configuration changes and setting up SMTP forwarding over port 25 to our mail server, everything was working fine up until a few days ago when we started having mail sent out returned to us. We aren't having any trouble communicating internally (to recipients on our domain) but it seems we're having trouble with outbound messages to web-based email recipients. (@hotmail, @live, @yahoo, @gmail...etc) Currently we are running Server 2003 SP2 and exchange 2003. I'm very unfamiliar with configuring Exchange and could really use some help in narrowing down the possibilities. I did some research and am becoming suspicious of Sender ID being the culprit due to our recent IP address change and the likelihood that Sender ID is identifying us as a fake domain. Am I going in entirely the wrong direction? Any input or guidance would be infinitely appreciated. This is the message that is returned when an outbound message fails...this particular one was sent to my @live.com account for testing purposes... Your message did not reach some or all of the intended recipients. The following recipient(s) could not be reached: [email protected] on 5/17/2012 3:02 PM There was a SMTP communication problem with the recipient's email server. Please contact your system administrator. Unfortunately, messages from xx.x.xx.x weren't sent. Please contact your Internet service provider since part of their network is on our block list. I tried a reverse DNS lookup and found that we are set up as a Forward-confirmed reverse DNS. So do I just need to contact my ISP and have them correct their DNS records or is this something I can solve on our end??

  Read the article

• RedStation.com is heaven for ddos attackers, How to file complaint?

  - by Ehsan

  Sorry, I don't know where to open this subject. This is not the first time we have faced with a massive DDOS attack from one of servers in RedStation.com and even after we had contacted with their abuse department with it's log there is no cooperation and they don't even like to bother themselves about it. and we don't know how to stop such activity. Do you know how to file complaint against this datacenter? we could not be patient anymore and see they are not care about such things on their network ? it seems like they are heaven for attackers now since they close their eyes to gain more money. I guess some global organization is missing in this matter to investigate such activity and make sure providers are responsible for their services. Here is some of it's log: 2686M 75G DROP all -- * * 31.3-RedStation 0.0.0.0/0 rt: 16167 0.002007 31.3-RedStation -> my-server-ip UDP Source port: 36391 Destination port: 16167 0.002011 31.3-RedStation -> my-server-ip UDP Source port: 38367 Destination port: 16312 0.002014 31.3-RedStation -> my-server-ip UDP Source port: 39585 Destination port: 12081 0.002018 31.3-RedStation -> my-server-ip UDP Source port: 39585 Destination port: 12081 0.002021 31.3-RedStation -> my-server-ip UDP Source port: 38367 Destination port: 16312 0.002025 31.3-RedStation -> my-server-ip UDP Source port: 39585 Destination port: 12081 0.002033 31.3-RedStation -> my-server-ip UDP Source port: 36391 Destination port: 16167 0.002037 31.3-RedStation -> my-server-ip UDP Source port: 38367 Destination port: 16312 0.002040 31.3-RedStation -> my-server-ip UDP Source port: 38367 Destination port: 16312 0.002044 31.3-RedStation -> my-server-ip UDP Source port: 38367 Destination port: 16312 0.002047 31.3-RedStation -> my-server-ip UDP Source port: 39585 Destination Any response would be appreciated

  Read the article

• Make call with alternate provider if NOANSWER

  - by adaptive

  I have two voip providers, one free an the other paid. The free provider only allows local calls to certain area codes, so I need to fall back to the the paid provider if a call fails. At the moment, I have the following context in my extensions.conf file: [globals] ; freephoneline.ca PRIMARY_PROVIDER=fpl ; voip.ms SECONDARY_PROVIDER=voipms [local] exten => _NXXNXXXXXX,1,Set(CALLERID(name)=${OUTGOING_NAME}) exten => _NXXNXXXXXX,n,Dial(SIP/${EXTEN}@${PRIMARY_PROVIDER}) exten => _NXXNXXXXXX,n,Set(CALLERID(num)=${OUTGOING_NUMBER}) exten => _NXXNXXXXXX,n,Dial(SIP/1${EXTEN}@${SECONDARY_PROVIDER}) exten => _NXXNXXXXXX,n,Hangup() I checked the logs and noticed that the free provider responds with NOANSWER if a call is not allowed (Even though it plays a message). What I want is to: Try calling the ${PRIMARY_PROVIDER} first. If NOANSWER is returned by provider (not that the callee did not answer), then call with ${SECONDARY_PROVIDER} How can I modify my dial plan to get the desired results? EDIT : The primary provider is freephoneline.ca, and I'm using asterisk v1.8.2.3-2

  Read the article

• Custom ASP.Net MVC 2 ModelMetadataProvider for using custom view model attributes

  - by SeanMcAlinden

  There are a number of ways of implementing a pattern for using custom view model attributes, the following is similar to something I’m using at work which works pretty well. The classes I’m going to create are really simple: 1. Abstract base attribute 2. Custom ModelMetadata provider which will derive from the DataAnnotationsModelMetadataProvider   Base Attribute MetadataAttribute using System; using System.Web.Mvc; namespace Mvc2Templates.Attributes {     /// <summary>     /// Base class for custom MetadataAttributes.     /// </summary>     public abstract class MetadataAttribute : Attribute     {         /// <summary>         /// Method for processing custom attribute data.         /// </summary>         /// <param name="modelMetaData">A ModelMetaData instance.</param>         public abstract void Process(ModelMetadata modelMetaData);     } } As you can see, the class simple has one method – Process. Process accepts the ModelMetaData which will allow any derived custom attributes to set properties on the model meta data and add items to its AdditionalValues collection.   Custom Model Metadata Provider For a quick explanation of the Model Metadata and how it fits in to the MVC 2 framework, it is basically a set of properties that are usually set via attributes placed above properties on a view model, for example the ReadOnly and HiddenInput attributes. When EditorForModel, DisplayForModel or any of the other EditorFor/DisplayFor methods are called, the ModelMetadata information is used to determine how to display the properties. All of the information available within the model metadata is also available through ViewData.ModelMetadata. The following class derives from the DataAnnotationsModelMetadataProvider built into the mvc 2 framework. I’ve overridden the CreateMetadata method in order to process any custom attributes that may have been placed above a property in a view model.   CustomModelMetadataProvider using System; using System.Collections.Generic; using System.Linq; using System.Web.Mvc; using Mvc2Templates.Attributes; namespace Mvc2Templates.Providers {     public class CustomModelMetadataProvider : DataAnnotationsModelMetadataProvider     {         protected override ModelMetadata CreateMetadata(             IEnumerable<Attribute> attributes,             Type containerType,             Func<object> modelAccessor,             Type modelType,             string propertyName)         {             var modelMetadata = base.CreateMetadata(attributes, containerType, modelAccessor, modelType, propertyName);               attributes.OfType<MetadataAttribute>().ToList().ForEach(x => x.Process(modelMetadata));               return modelMetadata;         }     } } As you can see, once the model metadata is created through the base method, a check for any attributes deriving from our new abstract base attribute MetadataAttribute is made, the Process method is then called on any existing custom attributes with the model meta data for the property passed in.   Hooking it up The last thing you need to do to hook it up is set the new CustomModelMetadataProvider as the current ModelMetadataProvider, this is done within the Global.asax Application_Start method. Global.asax protected void Application_Start()         {             AreaRegistration.RegisterAllAreas();               RegisterRoutes(RouteTable.Routes);               ModelMetadataProviders.Current = new CustomModelMetadataProvider();         }   In my next post, I’m going to demonstrate a cool custom attribute that turns a textbox into an ajax driven AutoComplete text box. Hope this is useful. Kind Regards, Sean McAlinden.

  Read the article

• Designing an email system to guarantee delivery

  - by GlenH7

  We are looking to expand our use of email for notification purposes. We understand it will generate more inbox volume, but we are being selective about which events we fire notification on in order to keep the signal-to-noise ratio high. The big question we are struggling with is designing a system that guarantees that the email was delivered. If an email isn't delivered, we will consider that an exception event that needs to be investigated. In reality, I say almost guarantees because there aren't any true guarantees with email. We're just looking for a practical solution to making sure the email got there and experiences others have had with the various approaches to guaranteeing delivery. For the TL;DR crowd - how do we go about designing a system to guarantee delivery of emails? What techniques should we consider so we know the emails were delivered? Our biggest area of concern is what techniques to use so that we know when a message is sent out that it either lands in an inbox or it failed and we need to do something else. Additional requirements: We're not at the stage of including an escalation response, but we'll want that in the future or so we think. Most notifications will be internal to our enterprise, but we will have some notifications being sent to external clients. Some of our application is in a hosted environment. We haven't determined if those servers can access our corporate email servers for relaying or if they'll be acting as their own mail servers. Base design / modules (at the moment): A module to assign tracking identification A module to send out emails A module to receive delivery notification (perhaps this is the same as the email module) A module that checks sent messages against delivery notification and alerts on undelivered email. Some references: Atwood: Send some email Email Tracking Some approaches: Request a response (aka read-receipt or Message Disposition Notification). Seems prone to failure since we have cross-compatibility issues due to differing mail servers and software. Return receipt (aka Delivery Status Notification). Not sure if all mail servers honor this request or not Require an action and therefore prove reply. Seems burdensome to force the recipients to perform an additional task not related to resolving the issue. And no, we haven't come up with a way of linking getting the issue fixed to whether or not the email was received. Force a click-through / Other site sign-in. Similar to requiring some sort of action, this seems like an additional burden and will annoy the users. On the other hand, it seems the most likely to guarantee someone received the notification. Hidden image tracking. Not all email providers automatically load the image, and how would we associate the image(s) with the email tracking ID? Outsource delivery. This gets us out of the email business, but goes back to how to guarantee the out-sourcer's receipt and subsequent delivery to the end recipient. As a related concern, there will be an n:n relationship between issue notification and recipients. The 1 issue : n recipients subset isn't as much of a concern although if we had a delivery failure we would want to investigate and fix the core issue. Of bigger concern is n issues : 1 recipient, and we're specifically concerned in making sure that all n issues were received by the recipient. How does forum software or issue tracking software handle this requirement? If a tracking identifier is used, Where is it placed in the email? In the Subject, or the Body?

  Read the article

• Sun Fire X4270 M3 SAP Enhancement Package 4 for SAP ERP 6.0 (Unicode) Two-Tier Standard Sales and Distribution (SD) Benchmark

  - by Brian

  Oracle's Sun Fire X4270 M3 server achieved 8,320 SAP SD Benchmark users running SAP enhancement package 4 for SAP ERP 6.0 with unicode software using Oracle Database 11g and Oracle Solaris 10. The Sun Fire X4270 M3 server using Oracle Database 11g and Oracle Solaris 10 beat both IBM Flex System x240 and IBM System x3650 M4 server running DB2 9.7 and Windows Server 2008 R2 Enterprise Edition. The Sun Fire X4270 M3 server running Oracle Database 11g and Oracle Solaris 10 beat the HP ProLiant BL460c Gen8 server using SQL Server 2008 and Windows Server 2008 R2 Enterprise Edition by 6%. The Sun Fire X4270 M3 server using Oracle Database 11g and Oracle Solaris 10 beat Cisco UCS C240 M3 server running SQL Server 2008 and Windows Server 2008 R2 Datacenter Edition by 9%. The Sun Fire X4270 M3 server running Oracle Database 11g and Oracle Solaris 10 beat the Fujitsu PRIMERGY RX300 S7 server using SQL Server 2008 and Windows Server 2008 R2 Enterprise Edition by 10%. Performance Landscape SAP-SD 2-Tier Performance Table (in decreasing performance order). SAP ERP 6.0 Enhancement Pack 4 (Unicode) Results (benchmark version from January 2009 to April 2012) System OS Database Users SAPERP/ECCRelease SAPS SAPS/Proc Date Sun Fire X4270 M3 2xIntel Xeon E5-2690 @2.90GHz 128 GB Oracle Solaris 10 Oracle Database 11g 8,320 20096.0 EP4(Unicode) 45,570 22,785 10-Apr-12 IBM Flex System x240 2xIntel Xeon E5-2690 @2.90GHz 128 GB Windows Server 2008 R2 EE DB2 9.7 7,960 20096.0 EP4(Unicode) 43,520 21,760 11-Apr-12 HP ProLiant BL460c Gen8 2xIntel Xeon E5-2690 @2.90GHz 128 GB Windows Server 2008 R2 EE SQL Server 2008 7,865 20096.0 EP4(Unicode) 42,920 21,460 29-Mar-12 IBM System x3650 M4 2xIntel Xeon E5-2690 @2.90GHz 128 GB Windows Server 2008 R2 EE DB2 9.7 7,855 20096.0 EP4(Unicode) 42,880 21,440 06-Mar-12 Cisco UCS C240 M3 2xIntel Xeon E5-2690 @2.90GHz 128 GB Windows Server 2008 R2 DE SQL Server 2008 7,635 20096.0 EP4(Unicode) 41,800 20,900 06-Mar-12 Fujitsu PRIMERGY RX300 S7 2xIntel Xeon E5-2690 @2.90GHz 128 GB Windows Server 2008 R2 EE SQL Server 2008 7,570 20096.0 EP4(Unicode) 41,320 20,660 06-Mar-12 Complete benchmark results may be found at the SAP benchmark website http://www.sap.com/benchmark. Configuration and Results Summary Hardware Configuration: Sun Fire X4270 M3 2 x 2.90 GHz Intel Xeon E5-2690 processors 128 GB memory Sun StorageTek 6540 with 4 * 16 * 300GB 15Krpm 4Gb FC-AL Software Configuration: Oracle Solaris 10 Oracle Database 11g SAP enhancement package 4 for SAP ERP 6.0 (Unicode) Certified Results (published by SAP): Number of benchmark users: 8,320 Average dialog response time: 0.95 seconds Throughput: Fully processed order line: 911,330 Dialog steps/hour: 2,734,000 SAPS: 45,570 SAP Certification: 2012014 Benchmark Description The SAP Standard Application SD (Sales and Distribution) Benchmark is a two-tier ERP business test that is indicative of full business workloads of complete order processing and invoice processing, and demonstrates the ability to run both the application and database software on a single system. The SAP Standard Application SD Benchmark represents the critical tasks performed in real-world ERP business environments. SAP is one of the premier world-wide ERP application providers, and maintains a suite of benchmark tests to demonstrate the performance of competitive systems on the various SAP products. See Also SAP Benchmark Website Sun Fire X4270 M3 Server oracle.com OTN Oracle Solaris oracle.com OTN Oracle Database 11g Release 2 Enterprise Edition oracle.com OTN Disclosure Statement Two-tier SAP Sales and Distribution (SD) standard SAP SD benchmark based on SAP enhancement package 4 for SAP ERP 6.0 (Unicode) application benchmark as of 04/11/12: Sun Fire X4270 M3 (2 processors, 16 cores, 32 threads) 8,320 SAP SD Users, 2 x 2.90 GHz Intel Xeon E5-2690, 128 GB memory, Oracle 11g, Solaris 10, Cert# 2012014. IBM Flex System x240 (2 processors, 16 cores, 32 threads) 7,960 SAP SD Users, 2 x 2.90 GHz Intel Xeon E5-2690, 128 GB memory, DB2 9.7, Windows Server 2008 R2 EE, Cert# 2012016. IBM System x3650 M4 (2 processors, 16 cores, 32 threads) 7,855 SAP SD Users, 2 x 2.90 GHz Intel Xeon E5-2690, 128 GB memory, DB2 9.7, Windows Server 2008 R2 EE, Cert# 2012010. Cisco UCS C240 M3 (2 processors, 16 cores, 32 threads) 7,635 SAP SD Users, 2 x 2.90 GHz Intel Xeon E5-2690, 128 GB memory, SQL Server 2008, Windows Server 2008 R2 DE, Cert# 2012011. Fujitsu PRIMERGY RX300 S7 (2 processors, 16 cores, 32 threads) 7,570 SAP SD Users, 2 x 2.90 GHz Intel Xeon E5-2690, 128 GB memory, SQL Server 2008, Windows Server 2008 R2 EE, Cert# 2012008. HP ProLiant DL380p Gen8 (2 processors, 16 cores, 32 threads) 7,865 SAP SD Users, 2 x 2.90 GHz Intel Xeon E5-2690, 128 GB memory, SQL Server 2008, Windows Server 2008 R2 EE, Cert# 2012012. SAP, R/3, reg TM of SAP AG in Germany and other countries. More info www.sap.com/benchmark

  Read the article

• Data Quality and Master Data Management Resources

  - by Dejan Sarka

  Many companies or organizations do regular data cleansing. When you cleanse the data, the data quality goes up to some higher level. The data quality level is determined by the amount of work invested in the cleansing. As time passes, the data quality deteriorates, and you need to repeat the cleansing process. If you spend an equal amount of effort as you did with the previous cleansing, you can expect the same level of data quality as you had after the previous cleansing. And then the data quality deteriorates over time again, and the cleansing process starts over and over again. The idea of Data Quality Services is to mitigate the cleansing process. While the amount of time you need to spend on cleansing decreases, you will achieve higher and higher levels of data quality. While cleansing, you learn what types of errors to expect, discover error patterns, find domains of correct values, etc. You don’t throw away this knowledge. You store it and use it to find and correct the same issues automatically during your next cleansing process. The following figure shows this graphically. The idea of master data management, which you can perform with Master Data Services (MDS), is to prevent data quality from deteriorating. Once you reach a particular quality level, the MDS application—together with the defined policies, people, and master data management processes—allow you to maintain this level permanently. This idea is shown in the following picture. OK, now you know what DQS and MDS are about. You can imagine the importance on maintaining the data quality. Here are some resources that help you preparing and executing the data quality (DQ) and master data management (MDM) activities. Books Dejan Sarka and Davide Mauri: Data Quality and Master Data Management with Microsoft SQL Server 2008 R2 – a general introduction to MDM, MDS, and data profiling. Matching explained in depth. Dejan Sarka, Matija Lah and Grega Jerkic: MCTS Self-Paced Training Kit (Exam 70-463): Building Data Warehouses with Microsoft SQL Server 2012 – I wrote quite a few chapters about DQ and MDM, and introduced also SQL Server 2012 DQS. Thomas Redman: Data Quality: The Field Guide – you should start with this book. Thomas Redman is the father of DQ and MDM. Tyler Graham: Microsoft SQL Server 2012 Master Data Services – MDS in depth from a product team mate. Arkady Maydanchik: Data Quality Assessment – data profiling in depth. Tamraparni Dasu, Theodore Johnson: Exploratory Data Mining and Data Cleaning – advanced data profiling with data mining. Forthcoming presentations I am presenting a DQS and MDM seminar at PASS SQL Rally Amsterdam 2013: Wednesday, November 6th, 2013: Enterprise Information Management with SQL Server 2012 – a good kick start to your first DQ and / or MDM project. Courses Data Quality and Master Data Management with SQL Server 2012 – I wrote a 2-day course for SolidQ. If you are interested in this course, which I could also deliver in a shorter seminar way, you can contact your closes SolidQ subsidiary, or, of course, me directly on addresses [email protected] or [email protected]. This course could also complement the existing courseware portfolio of training providers, which are welcome to contact me as well. Start improving the quality of your data now!

  Read the article

• Stack Exchange Notifier Chrome Extension [v1.2.9.3 released]

  - by Vladislav Tserman

  About Stack Exchange Notifier is a handy extension for Google Chrome browser that displays your current reputation, badges on Stack Exchange sites and notifies you on reputation's changes. You will now get notified of comments on your own posts (questions and answers) and of any comments that refer to you by @username in a comment, even if you do not own the post (aka mentions). All StackExchange sites are supported. Screenshots Access Install extensions from Google Chrome Extension Gallery Platform Google Chrome browser extension Contact Created by me (Vladislav Tserman). I'm available at: vladjan (at) gmail.com Follow Stack Exchange Notifier on twitter to get notified about news and updates: http://twitter.com/se_notifier Code Written in Java, Google Web Toolkit under Eclipse Helios. Stack Exchange Notifier uses the Stack Exchange API and is powered by Google App Engine for Java. Changelog I will be porting extension to not use app engine back-end due to some limitations. New versions of the extension will be making direct calls to Stack Exchange API right from your browser. Please do not expect new versions of the extension any time soon. Sorry. Read more about limitations here http://stackapps.com/questions/1713 and here http://stackoverflow.com/questions/3949815 Currently, you may sometimes experience some issues using extension, but most users will have no problems. You may notice too many errors in the logs, but there is nothing I can do with this now. Thanks for using my little app, thanks to all of you it still works in spite of many issues with API Version 1.2.9.3 - Thursday, October 14, 2010 - Bug fix release (back-end improvements) Version 1.2.9.2 - Thursday, October 07, 2010 - Bug fix release (high rate of occasional API errors were noticed so some fixes added to handle them were possible) Version 1.2.9.1 - Tuesday, October 05, 2010 - Mostly bug fix release, back-end performance improvements - You will now get notified of comments on your own posts (questions and answers) that are not older than 1 year and of any comments that refer to you by @username in a comment, even if you do not own the post (aka mentions). This is experimental feature, let me know if you like/need it. - New 'All sites' view displays all websites from Stack Exchange network (part of new feature that is not finished yet) Version 1.2.9 - Saturday, September 25, 2010 - Fixes an issue when some users got empty Account view. - When hovering on @Username on account view the title now displays '@Username on @SiteName' to easily understand the site name Version 1.2.7 - Wednesday, September 22, 2010 - Fixed an issue with notifications. - Minor improvements Version 1.2.5 - Tuesday, September 21, 2010 - Fixed an issue where some characters in response payload raised an exception when parsing to JSON. v1.2.3 (Sunday, September 19, 2010) - Support for new OpenID providers was added (Yahoo, MyOpenID, AOL) - UI improvements - Several minor defects were fixed v1.2.2 (Thursday, September 16, 2010) - New types of notifications added. Now extension notifies you on comments that are directed to you. Comments are expandable, so clicking on comment title will expand height to accommodate all available text. - UI and error handling improvements Future Application still in beta stage. I hope you're not having any problems, but if you are, please let me know. Leave your feedback and bug reports in comments. I'm available at: vladjan (at) gmail.com. I'm working on adding new features. I want to hear from the users and incorporate as much feedback as possible into the extension. Any suggestions for improvements/features to add?

  Read the article

• Visual Studio 2010 Beta 2 Startup Failures

  - by Rick Strahl

  I’ve been working with VS 2010 Beta 2 for a while now and while it works Ok most of the time it seems the environment is very, very fragile when it comes to crashes and installed packages. Specifically I’ve been working just fine for days, then when VS 2010 crashes it will not re-start. Instead I get the good old Application cannot start dialog: Other failures I’ve seen bring forth other just as useful dialogs with information overload like Operation cannot be performed which for me specifically happens when trying to compile any project. After a bit of digging around and a post to Microsoft Connect the solution boils down to resetting the VS.NET environment. The Application Cannot Start issue stems from a package load failure of some sort, so the work around for this is typically: c:\program files\Visual Studio 2010\Common7\IDE\devenv.exe /ResetSkipPkgs In most cases that should do the trick. If it doesn’t and the error doesn’t go away the more drastic: c:\program files\Visual Studio 2010\Common7\IDE\devenv.exe /ResetSettings is required which resets all settings in VS to its installation defaults. Between these two I’ve always been able to get VS to startup and run properly. BTW it’s handy to keep a list of command line options for Visual Studio around: http://msdn.microsoft.com/en-us/library/xee0c8y7%28VS.100%29.aspx Note that the /? option in VS 2010 doesn’t display all the options available but rather displays the ‘demo version’ message instead, so the above should be helpful. Also note that unless you install Visual C++ the Visual Studio Command Prompt icon is not automatically installed so you may have to navigate manually to the appropriate folder above. Cannot Build Failures If you get the Cannot compile error dialog, there is another thing that have worked for me: Change your project build target from Debug to Release (or whatever – just change it) and compile again. If that doesn’t work doing the reset steps above will do it for me. It appears this failure comes from some sort of interference of other versions of Visual Studio installed on the system and running another version first. Resetting the build target explicitly seems to reset the build providers to a normalized state so that things work in many cases. But not all. Worst case – resetting settings will do it. The bottom line for working in VS 2010 has been – don’t get too attached to your custom settings as they will get blown away quite a bit. I’ve probably been through 20 or more of these VS resets although I’ve been working with it quite a bit on an internal project. It’s kind of frustrating to see this kind of high level instability in a Beta 2 product which is supposedly the last public beta they will put out. On the other hand this beta has been otherwise rather stable and performance is roughly equivalent to VS 2008. Although I mention the crash above – crashes I’ve seen have been relatively rare and no more frequent than in VS 2008 it seems. Given the drastic UI changes in VS 2010 (using WPF for the shell and editor) I’m actually impressed that the product is as stable as it is at this point. Also I was seriously worried about text quality going to a WPF model, but thankfully WPF 4.0 addresses the blurry text issue with native font rendering to render text on non-cleartype enabled systems crisply. Anyway I hope that these notes are helpful to some of you playing around with the beta and running into problems. Hopefully you won’t need them :-}© Rick Strahl, West Wind Technologies, 2005-2010

  Read the article

< Previous Page | 34 35 36 37 38 39 40 41 42 43 44 45  | Next Page >