Search Results

Search found 2011 results on 81 pages for 'raw'.

Page 38/81 | < Previous Page | 34 35 36 37 38 39 40 41 42 43 44 45  | Next Page >

• Software that will burn DVDs with a SFV or Pararchive file for each disc?

  - by Matt

  I'd like to burn several thousand RAW files (.DNG) of around 10-30 MB each to DVD to backup my photo archive. I'm looking for software that can do this and include an SFV-type file on each disc burnt. These are my requirements: compression is optional, and probably not desirable due to the extra time involved files should be spread amongst the discs as self-contained units, i.e. I don't want to have to load files from more than one disc to be able to read the files on that disc, so that excludes WinRAR's spanning options I don't want to spend time writing ISO images first as this will be a task I'll need to repeat often as I add new images to my archive - the software should write to the DVDs for me as simply as possible I'd like the SFV/Pararchive/recovery record to be stored with the files on each disc, so it only references the files on that particular disk Thanks in advance!

  Read the article

• Shared storage solution for our sql server backups

  - by Gokhan

  We have 3 clustered sql servers. We have 5+ multi terrabyte databases and their backup files (compressed using quest litespeed) are hitting over 600gb each, We are required to keep at least a week or two weeks (if we can) of weekly full backups and then 6 days differential backups, and a week or 2 weeks worth of log backups local. We are currently limited to 2TB volumes from our san team, we can have multiple volumes but they are expensive ($200 per raw TB per month) and having to deal with many backup volumes instead of a single big volume is difficult. I think if we could have a shared network storage of 20TB+ raid 10 or so for all our servers for keeping the backups and another department will copy them to tape from the network storage and delete files according to the retention period would be good, if this box would be a build in operating system (even unix a complete file storage system) that would be good. What do you guys think, does this make sense to you, is there any manufacturer that sells a storage product like that which that work in a clustered environment? Thank you

  Read the article

• Doing a mysql dump causes swapping issues

  - by DFischer

  I do a mysqldump manually every night. I just noticed that after it is done and I try to access the website it is very slow. After I take a look at the free -mh I notice that the server is now swapping when it otherwise wasn't before the mysqldump. What am I to do in this case? Just restart the server every time I backup? That doesn't seem very effective. My database file raw is 1.1gb after the dump.

  Read the article

• How do you monitor the health of a mirrored disk in Windows?

  - by NitroxDM

  I have a Mirrored Dynamic disk on my Windows 2003 Server. How do you monitor the health of the volume? Is there a way to have the server send an email when there is an issue with the volume? Is there a way to have the server run S.M.A.R.T. tests? EDIT: Nothing says WTF like logging into a client server, running DISKPART LIST VOLUME and seeing this. Volume ### Ltr Label Fs Type Size Status Info ---------- --- ----------- ----- ---------- ------- --------- -------- Volume 0 X xDrive NTFS Mirror 233 GB Failed Rd Volume 1 C NTFS Simple 57 GB Healthy System Volume 2 D DVD-ROM 0 B Healthy Volume 3 F RAW Partition 466 GB Healthy Volume 4 E New Volume NTFS Partition 932 GB Healthy

  Read the article

• Sorting IPv4 Addresses

  - by Kumba

  So I've run into a quandary on sorting IPv4 addresses, and didn't know if there was a set rule in some obscure networking document. Do I do a straight sort on the raw address only (such as converting the IP address to a 32bit number and then sorting), do I factor in the CIDR via some mathematical formula, do I sort via the CIDR only (as if I'm comparing the network size and not the addresses directly)? I.e., normal math, we'd do something like -1 < 0 < 1 to denote the order of precedence. Given say, 10.1.0.0/16, 172.16.0.0/12, 192.168.1.0/24, and 192.168.1.42, what would be the order of precedence?

  Read the article

• eTrayz: Replace base system with a bootstrapped Debian

  - by knoopx

  I bought an eTrayz NAS time ago. The device is more or less good but it ships with a closed-source custom linux and a bunch of broken web-apps. I wanted to replace the whole system with a raw Debian installation. I successfully bootstrapped a Lenny Debian into a chroot and I'm able to use use it. However I would like it to be the default system and to boot automatically at login. The device itself ships with a bundled 2.6.24.4 kernel. I think the kernel is on a dedicated flash memory so I would prefere not to re-flash it. What do you think is the best way to accomplish it?

  Read the article

• Limiting and redirect port access with useragent

  - by linuxcore

  I'm trying to write iptables string match rule To block http://domain.com:8888 and https://domain.com:8888 when it matches the supplied string in the rule. And another rule to redirect the ports also from 8888 to 7777 I tried following rules but unfortunately didn't work iptables -A INPUT -p tcp -s 0.0.0.0/0 -m string --string linuxcore --algo bm --sport 8888 -j DROP iptables -t raw -A PREROUTING -m string --algo bm --string linuxcore -p tcp -i eth0 --dport 8888 -j DROP iptables -t nat -A PREROUTING -p tcp --dport 8888 -m string --algo bm --string "linuxcore" -j REDIRECT --to-port 7777 iptables -A INPUT -t nat -p tcp --dport 8888 -m string --algo bm --string "linuxcore" -j DROP I want to do this from iptables not the webserver because the server may not have a webserver and those ports are working on internal proxy or something like ..etc

  Read the article

• Error running Solr

  - by Jon H

  I'm trying to install Apache Solr for Plone, via collective.solr. I've followed the instructions above, and extended my buildout with: [buildout] extends = buildout.cfg https://github.com/Jarn/collective.solr/raw/master/buildout/solr.cfg [instance] eggs += collective.solr bin/buildout runs fine, however, when I try bin/solr-instance fg I get the following error: Traceback (most recent call last): File "bin/solr-instance", line 114, in <module> start(False) File "bin/solr-instance", line 43, in start stdout=logfp, stderr=logfp).pid File "/usr/lib/python2.6/subprocess.py", line 633, in __init__ errread, errwrite) File "/usr/lib/python2.6/subprocess.py", line 1139, in _execute_child raise child_exception OSError: [Errno 2] No such file or directory Graceful stop What am I missing / doing wrong?

  Read the article

• OSX Mail.app send only plaintext but read as html

  - by bawkstoo

  I get email which seems properly plaintext formatted, but when I forward it out, the font size ends up being enormous and a few other formatting stupidities. So I tried the following: defaults write com.apple.mail PreferPlainText -bool TRUE And this works great, all outgoing email regardless of the text original is plaintext only, just the way I like it. But now for incoming email only the plaintext portions are available to read without going into View - Message - Raw Source (or something similar to that). Does anyone know how I can force only outgoing mail to include only plaintext, but continue to read incoming mail in the formatting it was intended?

  Read the article

• Converting an ancient RH8 system to VMware ESXi

  - by donatello

  I am curious to know what options I have to convert a very old RedHat8 machine to a virtual one on ESXi. Looking at VMware Converter it seems there's an option to login to the RH8 using SSH, and from there it will convert to the ESXi-server. That makes me a bit nervous though, exactly what is happening there? The RH8 machine is slightly critical, and if anything messes up it'll likely result in many hours extra work. :( Another option I thought of was to boot a LiveCD on RH8-system and create a raw "dd dump" of the disk. The similar method is used to restore the image, I boot a LiveCD on the VM in ESXi and use "dd" to write it to disk. Is there any other option I could use? I'm using the cheap version of ESXi, hence I have no access to the Converter BootCD so these rather cumbersome methods is the only I can think of. :)

  Read the article

• Why does a Remote Desktop Redirected Printer Doc appear every time I connect to Windows Server 2003 SBS?

  - by Jim Dagg

  I've run into a weird, persistent issue regarding a remote desktop connection. Every time I successfully log into a server running Windows Server 2003 SBS, without taking any further action, after a few seconds a print job spontaneously appears on my machine, titled "Remote Desktop Redirected Printer Doc". The document is 4K, datatype RAW, processor "WinPrint". I've heard of people running into this issue before, but can't seem to hunt down a coherent solution. It's a minor annoyance, but I get annoyed when Windows complains about a print job that, as far as I know, came from nowhere. Any thoughts on why this would occur and how I could prevent it from happening?

  Read the article

• How do you passthrough native SATA drives to a guest on ESXi?

  - by John

  I have ESXi 4.0 running on an Intel DX58S0 Mothboardboard with an Intel Core i7 930 processor. VT-d is also enabled. I have three drives in the system, drive 0 is used for ESXi. Drive 1 and 2 contain data from an older machine and show up under the "Storage Adapters" section in configuration. I would like to allow a guest machine to access the data on these drives (as nativly as possible). I have enabled passthrough of the motherboard's built in SATA controller (Intel/Marvell 88SE6121 ). This controller shows up in my guest OS, but the guest shows no drives aside from the normal virtual drive. I have tried a Linux guest and Windows7. I have also configured the host machine to try IDE/RAID/ACHI modes for the SATA controller. Any ideas how I can configure one of my guests to get at the raw data on these drives?

  Read the article

• Hyper-V and host-installed hardware devices: can guest VMs access?

  - by gravyface

  Have a couple of servers I'd like to setup as Hyper-V Servers, with a couple of Windows 2008 Standard VMs. On the host, we have a few hardware devices we'd like to be accessible to the guest; I'm not sure if these are supported via a raw "pass-thru" on Hyper-V (which I don't have alot of experience with) if the same drivers are installed on the guest. Hardware in question is a Brooktrout fax card, a SCSI adapter for the tape drive, and a 9-pin serial connected to one of the core firewalls for management.

  Read the article

• Consume an XML Feed with PowerPoint 2010

  - by Matt Schweers

  Hi there. I'm looking for a way to consume an XML feed from a web-service directly into PowerPoint 2010. I found the LiveWeb plugin (http://skp.mvps.org/liveweb.htm) for PowerPoint that, while pretty cool, really only pulls in actual web content in a way that feels more like an iframe. Ideally, I would like to consume raw XML web service/feed with PowerPoint, parse it, and stylize the results. Is this possible? Even reading from a static XML file would be a good start.

  Read the article

• Lots of artifacts while streaming HD content with VLC 0.9.9 on CentOS

  - by Zsub

  I'm trying to stream (multicast) a x264 encoded file using VLC. This in itself succeeds, but the stream has a huge lot of artifacts. This seems to suggest that the data cannot be transported fast enough. If I check network usage, though, it's only using about 15 mbit. I have a similar SD stream which functions perfectly. I think I could improve stream performance by not streaming the raw data, but I cannot seem to get this working. It seems that on keyframes all artifacts are removed for a short while (less than a second). This is the command I use: vlc -vv hdtest.mkv --sout '#duplicate{dst=rtp{dst=ff02::1%eth1,mux=ts,port=5678,sap,group="Testgroup",name="TeststreamHD"}}' --loop Which is all one long line.

  Read the article

• Set Final Cut Express Sequence Options 4:3 to 960p (30fps)

  - by Maccaius

  Hi I have an project in FCE which was recorded in MPEG-4 video in 1280 x 960 (1,4MB/s) and whenever I import those mov files to FCE thez show just fine. but when i add the clips to the timeline (sequence) the quality is cropped - instead of HD i can onlz export the timeline with quicktime conversion and a resolution of 720 x 480. can anybody help me out and tell me how i can export the timeline in full HD quality (as the raw material itself is)? tried the quick setup and exporting as divx and AIC which doesnt reallz work. the actual video size is HD, but qualitz of the video is like SD...

  Read the article

• How can I can delete a project in Aperture, but not in Flickr?

  - by jchatard

  I have a Macbook Air as my only computer ; I store my shots on Flickr. The size of the SSD doesn't allow me to keep all my RAW files on my laptop. So I publish the photographs I like in their final state on Flickr with the built-in feature of Aperture. When I hit delete on a project (in Aperture) the message clearly indicates that all photos synched to any service like Facebook, Flickr or any other will be deleted. How can I can around this without the hacky way of unlinking Aperture from Flickr before deleting the project?

  Read the article

• What's a good tool for checking from my own machine that my server is up?

  - by chico

  I'm looking for a good tool (web site or not) that I can use to do a simple check whether my web server is accessible from outside LAN (it's serving in a non-standard port). To give some context, I've gone through this problem: can't access my ip from outside. Even the tools I've found are not really working. Currently to fetch the html I serve with the online bash tool I do: curl <my ip>:<my port> \ | sed 's/&/\&amp;/g; s/</\&lt;/g; s/>/\&gt;/g; s/"/\&quot;/g; s/'"'"'/\&#39;/g' I'm looking for a simple tool that can display the html properly, or just show raw text without resorting to sed html escaping and curl.

  Read the article

• How can I combine 30,000 images into a timelapse movie?

  - by Swift

  I have taken 30,000 still images that I want to combine into a timelapse movie. I have tried QuickTime Pro, TimeLapse 3, and Windows Movie Maker, but with such a huge amount of images, each of the programs fail (I tried SUPER ©, but couldn't get it to work either...?). It seems that all of these programs crash after a few thousand pictures. The images I have are all in .JPG format, at a resolution of 1280x800, and I'm looking for a program that can put these images into a timelapse movie in some kind of lossless format (raw/uncompressed AVI would be fine) for further editing. Does anyone have any ideas, or has anyone tried anything like this with a similar number of pictures?

  Read the article

• Hyper-V and host-installed hardware devices: can guest VMs access?

  - by gravyface

  Have a couple of servers I'd like to setup as Hyper-V Servers, with a couple of Windows 2008 Standard VMs. On the host, we have a few hardware devices we'd like to be accessible to the guest; I'm not sure if these are supported via a raw "pass-thru" on Hyper-V (which I don't have a lot of experience with) if the same drivers are installed on the guest. Hardware in question is a Brooktrout fax card, a SCSI adapter for the tape drive, and a 9-pin serial connected to one of the core firewalls for management.

  Read the article

• How can I combine 30,000 images into a timelapse movie?

  - by Swift

  I have taken 30,000 still images that I want to combine into a timelapse movie. I have tried QuickTime Pro, TimeLapse 3, and Windows Movie Maker, but with such a huge amount of images, each of the programs fail (I tried SUPER ©, but couldn't get it to work either...?). It seems that all of these programs crash after a few thousand pictures. The images I have are all in .JPG format, at a resolution of 1280x800, and I'm looking for a program that can put these images into a timelapse movie in some kind of lossless format (raw/uncompressed AVI would be fine) for further editing. Does anyone have any ideas, or has anyone tried anything like this with a similar number of pictures?

  Read the article

• How to recover the data from the crashed (external) hard disk drive (NTFS)?

  - by shveerab

  The 300 GB harddisk has 2 partitions,90 GB and 200 GB! I can see the drives in windows(XP) but unable to access them, the file system is shown as RAW, 0 used space and 0 free space!..chkdsk returns the error "unable to determine volume version and date. chkddsk aborted." Is the MBR corrupt? How do I restore it? TestDisk tool isn't recognizing the partitions and says invalid entry for heads/cylinder, 15 and should be 255 and suggests to change it..Should I go ahead and change it? Please advise!

  Read the article

• Viewing zip archive contents using 'less' on OS X.

  - by multihead

  I couldn't help but notice that the 'less' program on all of the recent distributions of Linux that I've used (Ubuntu and Gentoo in this case) allow me to view the contents of ZIP and TAR archives, while the install of 'less' that I have on OS X (and Solaris) instead produce a "foo.zip may be a binary file. See it anyway?", which proceeds to spit out the raw binary data instead of a nice file structure listing. Google has not produced much in the way of helpful results -- it's tricky to search for 'less' in this context. I downloaded and built the latest version from greenwoodsoftware.com, but even it refuses to show the contents of these archives. I didn't come across any related configure/build options either. Any ideas? Thanks!

  Read the article

• Is there Linux Live USB that works with Snow Leopard macbook pro from 2010 april

  - by rofrol

  Hello, I was searching for a long time a Linux Live USB that I can boot my macbook pro from. Is there such distro so I can install it on Snow Leopard or Windows 7? UPDATE I've found this: "isohybrid" CD images (..) are special in that as well as the normal CD-based ISO9660 filesystem they also contain a valid-looking DOS-style partition table. Thus, if you simply copy one of these images raw to a USB stick a normal PC BIOS will boot the image directly. (...) Finally: I'd like to add support into xorriso for creating the nasty HFS hybrid images that are needed for booting Macs. The code that does this in cdrkit is probably some of the worst that I've ever worked with, and I'd like to get away from it. If only Apple hadn't stupidly built their proprietary platform around this shit and had used open standards instead Source

  Read the article

• How can I make a non-destructive copy of a (NTFS) partition?

  - by violet313

  I want to recover some deleted files from a healthy NTFS partition on an undamaged hard-disk. In order to leave the partition undisturbed, i plan to use dd to clone the partition to a raw image file & then attempt recovery from that mounted clone. Will dd if=/dev/sd<xn> of=/path/to/output.img perform a non-destructive copy ? Is attempting a restore from a clone using dd the best approach? [edit, wrt Deltiks answer, i need to be a bit clearer about what i'm asking] eg: are there some s/w that can do something more with the original sectors ? eg: if it was a damaged hard-disk i am aware that any kind of read is potentially destructive. but assuming my disk head is not going to suddenly spaz out etc, am i reducing my chances of a successful recovery (at any cost) by using an apparently non-destructive single read of my undamaged hard-disk. (btw: i am planning on using ntfsundelete & testdisk for recovery)

  Read the article

< Previous Page | 34 35 36 37 38 39 40 41 42 43 44 45  | Next Page >