Search Results

Search found 1218 results on 49 pages for 'razor shadow'.

Page 38/49 | < Previous Page | 34 35 36 37 38 39 40 41 42 43 44 45  | Next Page >

  • "No more threads can be created in the system" in Network and Sharing Center

    - by Zell Faze
    A while back I noticed on one of our laboratory computers (Windows 7, very little extra software installed) that the network connection icon in the system tray would claim that it had no network connection, even though it did. This issue would go away after the computer was rebooted, but would surface again the next time I looked at the computer (a few days later). Upon opening the Network and Sharing Center I am shown an actual error message, but not one that seems to give me a lot of information about what the problem is. In the place of the usual information about network adapters and whether you are connected to the Internet it simply says: "No more threads can be created in the system." The Event Viewer shows hundreds of events from different services also with the same message. "Volume Shadow Copy Service error: Unexpected error calling routine CoCreateInstance. hr = 0x800700a4, No more threads can be created in the system."; "The WinHTTP Web Proxy Auto-Discovery Service service failed to start due to the following error: A thread could not be created for the service."; "The IP Helper service terminated with the following error: No more threads can be created in the system." As far as I can tell, this message seems to mean that there is some sort of resource leak in Windows where something is creating a large number of threads and those threads are not being killed off? I've tried restarting WMI and several services related to networking, without avail. Can anyone provide more information on what "No more threads can be created in the system" might mean and what I might be able to do to fix the issue? Currently the only solution appears to be restarting.

    Read the article

  • Using a GoDaddy SSL certificate with Virtualmin (Webmin)

    - by Kevin
    A client of mine decided to go ahead and move from a self-signed certificate to a commercial one ("GoDaddy Standard SSL"). The first service I wanted to move to the commercial SSL cert was Webmin/Usermin... However, upon migrating to the new SSL cert and restarting Webmin, I got the following error: [21/Oct/2012:13:12:47 -0400] Restarting Failed to open SSL cert /etc/webmin/miniserv.cert at /usr/share/webmin/miniserv.pl line 4229. Error: Webmin server did not write new PID file And that's all it says. Here's Webmin's config file (/etc/webmin/miniserv.conf): port=10000 root=/usr/share/webmin mimetypes=/usr/share/webmin/mime.types addtype_cgi=internal/cgi realm=Webmin Server logfile=/var/webmin/miniserv.log errorlog=/var/webmin/miniserv.error pidfile=/var/webmin/miniserv.pid logtime=168 ppath= ssl=0 env_WEBMIN_CONFIG=/etc/webmin env_WEBMIN_VAR=/var/webmin atboot=1 logout=/etc/webmin/logout-flag listen=10000 denyfile=\.pl$ log=1 blockhost_failures=5 blockhost_time=60 syslog=1 session=1 server=MiniServ/1.600 userfile=/etc/webmin/miniserv.users keyfile=/etc/webmin/miniserv.pem passwd_file=/etc/shadow passwd_uindex=0 passwd_pindex=1 passwd_cindex=2 passwd_mindex=4 passwd_mode=0 preroot=virtual-server-theme passdelay=1 sudo=1 sessiononly=/virtual-server/remote.cgi preload=virtual-server=virtual-server/virtual-server-lib-funcs.pl virtual-server=virtual-server/feature-unix.pl virtual-server=virtual-server/feature-dir.pl virtual-server=virtual-server/feature-dns.pl virtual-server=virtual-server/feature-mail.pl virtual-server=virtual-server/feature-web.pl virtual-server=virtual-server/feature-webalizer.pl virtual-server=virtual-server/feature-ssl.pl virtual-server=virtual-server/feature-logrotate.pl virtual-server=virtual-server/feature-mysql.pl virtual-server=virtual-server/feature-postgres.pl virtual-server=virtual-server/feature-ftp.pl virtual-server=virtual-server/feature-spam.pl virtual-server=virtual-server/feature-virus.pl virtual-server=virtual-server/feature-webmin.pl virtual-server=virtual-server/feature-virt.pl virtual-server=virtual-server/feature-virt6.pl anonymous=/virtualmin-mailman/unauthenticated=anonymous premodules=WebminCore logouttimes= extracas=/etc/webmin/miniserv.chain certfile=/etc/webmin/miniserv.cert ssl_redirect=0 Here is a screen shot of the Webmin SSL config screen as well, for what it's worth: http://postimage.org/image/r472go7tf/ Edited Mon Oct 22 10:45:24 CDT 2012: When running the command openssl x509 -noout -text -in /etc/webmin/miniserv.cert as Falcon Momot suggested, I get the following error: unable to load certificate 139760808240800:error:0906D06C:PEM routines:PEM_read_bio:no start line:pem_lib.c:696:Expecting: TRUSTED CERTIFICATE

    Read the article

  • NetApp FAS 2040 LDAP Win2k8R2

    - by it_stuck
    I am trying to get my FAS2040 to action user lookups using LDAP, below is the filer configuration options: filer> options ldap ldap.ADdomain dc1.colour.domain.local ldap.base OU=Users,OU=something1,OU=something2,OU=darkside,DC=colour,DC=domain,DC=local ldap.base.group ldap.base.netgroup ldap.base.passwd ldap.enable on ldap.minimum_bind_level anonymous ldap.name domain-admin-account ldap.nssmap.attribute.gecos gecos ldap.nssmap.attribute.gidNumber gidNumber ldap.nssmap.attribute.groupname cn ldap.nssmap.attribute.homeDirectory homeDirectory ldap.nssmap.attribute.loginShell loginShell ldap.nssmap.attribute.memberNisNetgroup memberNisNetgroup ldap.nssmap.attribute.memberUid memberUid ldap.nssmap.attribute.netgroupname cn ldap.nssmap.attribute.nisNetgroupTriple nisNetgroupTriple ldap.nssmap.attribute.uid uid ldap.nssmap.attribute.uidNumber uidNumber ldap.nssmap.attribute.userPassword userPassword ldap.nssmap.objectClass.nisNetgroup nisNetgroup ldap.nssmap.objectClass.posixAccount posixAccount ldap.nssmap.objectClass.posixGroup posixGroup ldap.passwd ****** ldap.port 389 ldap.servers ldap.servers.preferred ldap.ssl.enable off ldap.timeout 20 ldap.usermap.attribute.unixaccount unixaccount ldap.usermap.attribute.windowsaccount sAMAccountName ldap.usermap.base ldap.usermap.enable on output of nsswitch.conf: hosts: files dns passwd: ldap files netgroup: ldap files group: ldap files shadow: files nis Error Message(s): [filer: auth.ldap.trace.LDAPConnection.statusMsg:info]: AUTH: TraceLDAPServer- Starting AD LDAP server address discovery for dc1.colour.domain.LOCAL. [filer: auth.ldap.trace.LDAPConnection.statusMsg:info]: AUTH: TraceLDAPServer- Found no AD LDAP server addresses using DNS site query (site). [filer: auth.ldap.trace.LDAPConnection.statusMsg:info]: AUTH: TraceLDAPServer- Found no AD LDAP server addresses using generic DNS query. Could not get passwd entry for name = <random user> the filer can ping the FQDN of dc1 the filer can ping the IP of dc1 the filer cannot ping "dc1" I'm not sure where I'm going wrong, so any pointers would be great.

    Read the article

  • postfix sasl "cannot connect to saslauthd server: No such file or directory"

    - by innotune
    I try to setup postfix with smtp authentication. I want to use /etc/shadow as my realm Unfortunately I get a "generic error" when i try to authenticate # nc localhost 25 220 mail.foo ESMTP Postfix AUTH PLAIN _base_64_encoded_user_name_and_password_ 535 5.7.8 Error: authentication failed: generic failure In the mail.warn logfile i get the following entry Oct 8 10:43:40 mail postfix/smtpd[1060]: warning: SASL authentication failure: cannot connect to saslauthd server: No such file or directory Oct 8 10:43:40 mail postfix/smtpd[1060]: warning: SASL authentication failure: Password verification failed Oct 8 10:43:40 mail postfix/smtpd[1060]: warning: _ip_: SASL PLAIN authentication failed: generic failure However the sasl setup seems to be fine $ testsaslauthd -u _user_ -p _pass_ 0: OK "Success." i added smtpd_sasl_auth_enable = yes to the main.cf This is my smtpd.conf $ cat /etc/postfix/sasl/smtpd.conf pwcheck_method: saslauthd mech_list: PLAIN LOGIN saslauthd_path: /var/run/saslauthd/mux autotransition:true I tried this conf with the last two commands and without. I'm running debian stable. How can postfix find and connect to the saslauthd server? Edit: I'm not sure whether postfix runs in a chroot The master.cf looks like this: http://pastebin.com/Fz38TcUP saslauth is located in the sbin $ which saslauthd /usr/sbin/saslauthd The EHLO has this response EHLO _server_name_ 250-_server_name_ 250-PIPELINING 250-SIZE 10240000 250-VRFY 250-ETRN 250-STARTTLS 250-AUTH LOGIN PLAIN 250-ENHANCEDSTATUSCODES 250-8BITMIME 250 DSN

    Read the article

  • PAM Winbind Expired Password

    - by kernelpanic
    We've got Winbind/Kerberos setup on RHEL for AD authentication. Working fine however I noticed that when a password has expired, we get a warning but shell access is still granted. What's the proper way of handling this? Can we tell PAM to close the session once it sees the password has expired? Example: login as: ad-user [email protected]'s password: Warning: password has expired. [ad-user@server ~]$ Contents of /etc/pam.d/system-auth: auth required pam_env.so auth sufficient pam_unix.so nullok try_first_pass auth requisite pam_succeed_if.so uid >= 500 quiet auth sufficient pam_krb5.so use_first_pass auth sufficient pam_winbind.so use_first_pass auth required pam_deny.so account [default=2 success=ignore] pam_succeed_if.so quiet uid >= 10000000 account sufficient pam_succeed_if.so user ingroup AD_Admins debug account requisite pam_succeed_if.so user ingroup AD_Developers debug account required pam_access.so account required pam_unix.so broken_shadow account sufficient pam_localuser.so account sufficient pam_succeed_if.so uid < 500 quiet account [default=bad success=ok user_unknown=ignore] pam_krb5.so account [default=bad success=ok user_unknown=ignore] pam_winbind.so account required pam_permit.so password requisite pam_cracklib.so try_first_pass retry=3 password sufficient pam_unix.so md5 shadow nullok try_first_pass use_authtok password sufficient pam_krb5.so use_authtok password sufficient pam_winbind.so use_authtok password required pam_deny.so session [default=2 success=ignore] pam_succeed_if.so quiet uid >= 10000000 session sufficient pam_succeed_if.so user ingroup AD_Admins debug session requisite pam_succeed_if.so user ingroup AD_Developers debug session optional pam_mkhomedir.so umask=0077 skel=/etc/skel session optional pam_keyinit.so revoke session required pam_limits.so session optional pam_mkhomedir.so session [success=1 default=ignore] pam_succeed_if.so service in crond quiet use_uid session required pam_unix.so session optional pam_krb5.so

    Read the article

  • How do I improve my incremental-backup performance?

    - by Alistair Bell
    I'm currently using the traditional rsync+cp -al method to create incremental/snapshot backups of our server tree. The backups are going onto a pair of eight-disk towers connected to the backup machine (a Sandy Bridge machine with 16 GB of RAM, running CentOS 5.5) via four eSATA connections (four disks per connection). Each disk is a regular 2 TB disk, so we have 32 TB of disk space connected to the backup machine. We're backing up about 20 TB of data on the servers with this. The problem is that each daily backup is taking more than 24 hours, and the real time-killer isn't the actual rsync, but the time it takes to perform a cp -al of the tree locally on the backup machine. It's taking more than 12 hours just to make the shadow copy of the tree, and as far as I can tell the performance backlog is at the disk (top shows the cp using a lot of RAM but not a lot of CPU and mostly in uninterruptible-sleep state) We have the server data split into four major volumes (and a few minor ones), and each of these backups runs in parallel (with some offsets in the cron to try to get some disks' cp done first). There are two volumes on the backup drive, both striped LVM volumes of 16 TB each. So obviously I need to improve the performance because it's unusable as it stands. The first question is: when CentOS 6 comes out, with support for btrfs, will making snapshots of subvolumes with btrfs substantially increase this performance? The second is: is there a way, with ext3 or something else supported in CentOS 5 or 6, to 'encourage' it to put the directories/inodes in one part of a volume (which could happen to be the part that's on an SSD, via LVM) and the files in another? That would presumably solve the problem, but I don't know of ways to hint ext3 like that.

    Read the article

  • Nginx with PAM authentication through pam_script

    - by Envek
    Have anyone set up such a configuration? It's not work for me. So, I've installed nginx-extras on Ubuntu 12.04 (it's built with PAM module), and write to site config: location ^~ /restricted_place/ { auth_pam "Please specify login and password from main_site"; auth_pam_service_name "nginx"; } Afterwards, in /etc/pam.d/nginx: auth required pam_script.so dir=/path/to/my/auth_scripts And wrote simplest /path/to/my/auth_scripts/pam_script_auth (also I've tried to write complicated scripts) #!/bin/sh exit 0 # should allow anyone Doesn't work. The script is launched (I've wrote full functional script, that successfully executes, check credentials, writes to its own log and returns correct exit code, and executes noticeably long). But no access granted. Only rejected. In /var/log/nginx/error.log appears next record: 2012/09/13 10:44:42 [alert] 1666#0: waitpid() failed (10: No child processes) If I'm specify in /etc/pam.d/nginx: auth required pam_unix.so and grant for www-data user right to read /etc/shadow, unix authorization works fine. But script auth doesn't work. Can't understand, where is trouble. In nginx module, or in pam_script module.

    Read the article

  • Solaris ldap Authentication

    - by Tman
    Iv been having a trouble trying to get my Solaris 10 server to authenticate against an eDir server.im managed to Set up my linux(RHeL,SLES) servers to authenticate against the ldap Server.which works fine. Here is my configuration Files. ldapclient list: NS_LDAP_FILE_VERSION= 2.0 NS_LDAP_BINDDN= cn=proxyuser,o=AEDev NS_LDAP_BINDPASSWD= {NS1}ecfa88f3a945c22222233 NS_LDAP_SERVERS= 192.168.0.19 NS_LDAP_SEARCH_BASEDN= ou=auth,o=AEDev NS_LDAP_AUTH= simple NS_LDAP_SEARCH_SCOPE= sub NS_LDAP_CACHETTL= 0 NS_LDAP_CREDENTIAL_LEVEL= anonymous NS_LDAP_SERVICE_SEARCH_DESC= group:ou=Groups,ou=auth,o=AEDev NS_LDAP_SERVICE_SEARCH_DESC= shadow:ou=users,ou=auth,o=AEDev?sub?objectClass=shadowAccount NS_LDAP_SERVICE_SEARCH_DESC= passwd:ou=auth,o=AEDev?sub?objectClass=posixAccount NS_LDAP_BIND_TIME= 10 NS_LDAP_SERVICE_AUTH_METHOD= pam_ldap:simple getent passwd works fine: root:x:0:0:Super-User:/:/sbin/sh daemon:x:1:1::/: bin:x:2:2::/usr/bin: sys:x:3:3::/: adm:x:4:4:Admin:/var/adm: lp:x:71:8:Line Printer Admin:/usr/spool/lp: uucp:x:5:5:uucp Admin:/usr/lib/uucp: nuucp:x:9:9:uucp Admin:/var/spool/uucppublic:/usr/lib/uucp/uucico smmsp:x:25:25:SendMail Message Submission Program:/: listen:x:37:4:Network Admin:/usr/net/nls: gdm:x:50:50:GDM Reserved UID:/: webservd:x:80:80:WebServer Reserved UID:/: postgres:x:90:90:PostgreSQL Reserved UID:/:/usr/bin/pfksh svctag:x:95:12:Service Tag UID:/: nobody:x:60001:60001:NFS Anonymous Access User:/: noaccess:x:60002:60002:No Access User:/: nobody4:x:65534:65534:SunOS 4.x NFS Anonymous Access User:/: tlla:x:2012:100::/home/tlla: test:x:2011:100::/home/test: thato:x:2010:100::/home/thato: pam.conf login auth sufficient pam_unix_auth.so.1 #server_policy login auth sufficient /usr/lib/security/pam_ldap.so.1 try_first_pass login auth required pam_dial_auth.so.1 rlogin auth sufficient pam_rhosts_auth.so.1 rlogin auth requisite pam_authtok_get.so.1 rlogin auth required pam_dhkeys.so.1 rlogin auth required pam_unix_cred.so.1 rlogin auth sufficient pam_unix_auth.so.1 rlogin auth sufficient /usr/lib/security/pam_ldap.so.1 try_first_pass rsh auth sufficient pam_rhosts_auth.so.1 rsh auth required pam_unix_cred.so.1 rsh auth sufficient pam_unix_auth.so.1 #server_policy rsh auth sufficient /usr/lib/security/pam_ldap.so.1 try_first_pass other auth requisite pam_authtok_get.so.1 other auth required pam_dhkeys.so.1 other auth required pam_unix_cred.so.1 other auth sufficient pam_unix_auth.so.1 other auth sufficient /usr/lib/security/pam_ldap.so.1 try_first_pass passwd auth required pam_passwd_auth.so.1 passwd auth sufficient pam_unix_auth.so.1 ssh account sufficient pam_unix.so.1 ssh account sufficient /usr/lib/security/pam_ldap.so.1 try_first_pass other account requisite pam_roles.so.1 other account sufficient pam_unix_account.so.1 other account sufficient /usr/lib/security/pam_ldap.so.1 try_first_pass other password required pam_dhkeys.so.1 other password requisite pam_authtok_get.so.1 other password requisite pam_authtok_check.so.1 other password required pam_authtok_store.so.1 other password sufficient pam_unix.so.1 other password sufficient /usr/lib/security/pam_ldap.so.1 try_first_pass Local Authentication Works But LDAP Authentication Doesn't Work.

    Read the article

  • Chmod 644 on /etc/ any way to fix?

    - by DazSlayer
    I tried to tab complete something and I guess it wasnt there. I know you are not supposed to set the permissions to /etc/ like that, but my permissions seem to be all messed up. whoami prints out cannot find name for user ID 1002 and I cannot cd into /etc/ anymore. passwd and shadow use 640 and 644 so I am not sure why this is a problem. Regardless, is there any way to fix this? The command run was sudo chmod 644 /etc/ I have no name!@vpn-server:/$ whoami whoami: cannot find name for user ID 1002 I have no name!@vpn-server:/$ cd etc bash: cd: etc: Permission denied I have no name!@vpn-server:/$ ls -al etc d????????? ? ? ? ? ? . d????????? ? ? ? ? ? .. d????????? ? ? ? ? ? acpi -????????? ? ? ? ? ? adduser.conf I have no name!@vpn-server:/$ sudo su sudo: can't open /etc/sudoers: Permission denied

    Read the article

  • Controller Error: Do I need to worry?

    - by Kryten
    Hi, I have a HP Pavillion dv5224ea Laptop with Windows 7 on it. Recently I discovered a Error in Event Viewer: The driver detected a controller error on \Device\Ide\IdePort1. (more details): - System - Provider [ Name] atapi - EventID 11 [ Qualifiers] 49156 Level 2 Task 0 Keywords 0x80000000000000 - TimeCreated [ SystemTime] 2010-03-07T12:43:07.090197600Z EventRecordID 30198 Channel System Computer Alistair-Win7 Security - EventData \Device\Ide\IdePort1 0000100001000000000000000B0004C002000000850100C00000000000000000000000000000000000000000000000000000000004100000 -------------------------------------------------------------------------------- Binary data: In Words 0000: 00100000 00000001 00000000 C004000B 0008: 00000002 C0000185 00000000 00000000 0010: 00000000 00000000 00000000 00000000 0018: 00000000 00001004 In Bytes 0000: 00 00 10 00 01 00 00 00 ........ 0008: 00 00 00 00 0B 00 04 C0 .......À 0010: 02 00 00 00 85 01 00 C0 ......À 0018: 00 00 00 00 00 00 00 00 ........ 0020: 00 00 00 00 00 00 00 00 ........ 0028: 00 00 00 00 00 00 00 00 ........ 0030: 00 00 00 00 04 10 00 00 ........ Event Viewer is recording A LOT of these errors (sometimes 13, one after the other!). Do I need to worry? What does this error mean? What device could "\Device\Ide\IdePort1" be? What is a ATAPI Error? Do I need to re-install Windows? I generally find the occurs when I try to backup my machine (using Windows Backup) or when using a program that uses Volume Shadow Copy. I have run "sfc", no problems. There are no Device Errors in Device Manager. I have also run "vssadmin list writers", no problems. Whats going on??? Would it be a good idea to re-install Windows 7?

    Read the article

  • My EliteBook is not auto picking 1080p for external monitor, poor display on forcing

    - by Griever
    I'm connecting my Samsung LED S22A300B to my HP EliteBook 6930p through VGA out. Laptop has Intel 4500MHD video card. I have latest drivers installed for both card and monitor. Only 800x600 and 1024x768 are shown. A lot of other people get this problem when they use it with docking station as discussed here. But I am not using any docking station. The monitor works great with my desktop though. As advised on the aforementioned page, one of the things I tried was to force the resolution using Intel's "custom resolution" feature. I installed PowerStrip on my desktop and copied advanced timing values(front/back porch,sync width, etc.) from there and then used the same values while defining a custom resolution in my laptop's Intel graphics utility. As a result, I got the 1080p resolution but the display is poor. Text has some weird colored shadow and sometimes on images too. What should I do?

    Read the article

  • How do photoshop slices and layer comps interact?

    - by Steve314
    I'm interested in using Photoshop (I have CS2) for some user interface design. I was hoping to be able to use slices and layer comps to mark out particular elements, and use Javascript scripting to export multiple graphics files and text descriptions (positions and sizes of slices mainly) that will be used by my program. My problem is that I've never used Photoshop for web design, or otherwise used slices, and I'm not confident that I understand how they interact with layer comps. This is what I believe (and hope) is correct... Manual slices aren't affected by layer comps in any way - they aren't saved as part of a layer comp. The same manual slices will be active irrespective of which layer comp is selected. Layer-based slices aren't directly affected by layer comps, but they are indirectly affected in that the layer comp saves details of layer position and style. Thus selecting a layer comp may move a layer and change its style, affecting the location and size of its layer-based slice, or may effectively disable the slice by hiding the layer. Automatic slices aren't directly affected by layer comps, but are indirectly affected due to changes to the layer-based slices. So, layer based slices (which are my main interest) may move, may change size (to accomodate a style such as a drop shadow), and may be effectively disabled by the layer being hidden. Other details (and all details of manual slices) will remain constant irrespective of which layer comp is active. Is that correct?

    Read the article

  • NIS user not being added to NIS group

    - by Brian
    I have set up a NIS server and several NIS clients. I have a user and a group on the NIS server like so: /etc/passwd: myself:x:5000:5000:,,,:/home/myself:/bin/bash /etc/group: fishy:x:3001:otheruser,etc,myself,moreppl I imported the users and groups on the NIS client by adding +:::::: to /etc/passwd and +::: to /etc/group. I can log in to the NIS client, but when I run groups, fishy is not listed. But getent group fishy shows that it was imported correctly and lists me as a member. And if I do sudo su - myself, then suddenly groups says I am in the group! I also had nscd installed, and the groups worked correctly for a while. It seemed like after being logged in for a while, I would silently be dropped out of the group. If I restarted nscd and logged in again, then the groups worked correctly...for a while. There are no UID or GID conflicts with local users or groups. Update: Contents of /etc/nsswitch.conf: passwd: compat group: compat shadow: compat hosts: files nis dns networks: files protocols: db files services: db files ethers: db files rpc: db files netgroup: nis aliases: nis files

    Read the article

  • VMware Data Recovery error -3960 and Event ID 8193 on Windows Server 2003

    - by flooooo
    I've been trying to solve this problem since a few days now without any success. What I'm trying is to make a backup of a virtual machine running Windows Server 2003 SP 2 using VMware Data Recovery 2.0.0.1861. When starting the backup task it tries to make a snapshot of the virtual machine using VSS which fails with error: Event Type: Error Event Source: VSS Event Category: None Event ID: 8193 Date: 05.06.2012 Time: 12:12:01 User: N/A Computer: LEGOLAS Description: Volume Shadow Copy Service error: Unexpected error calling routine RegSaveKeyExW. hr = 0x800703f8. For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. Data: 0000: 2d 20 43 6f 64 65 3a 20 - Code: 0008: 57 52 54 52 45 47 52 43 WRTREGRC 0010: 30 30 30 30 30 33 39 36 00000396 0018: 2d 20 43 61 6c 6c 3a 20 - Call: 0020: 57 52 54 52 45 47 52 43 WRTREGRC 0028: 30 30 30 30 30 33 31 38 00000318 0030: 2d 20 50 49 44 3a 20 20 - PID: 0038: 30 30 30 30 36 34 38 38 00006488 0040: 2d 20 54 49 44 3a 20 20 - TID: 0048: 30 30 30 30 34 33 38 34 00004384 0050: 2d 20 43 4d 44 3a 20 20 - CMD: 0058: 43 3a 5c 57 49 4e 44 4f C:\WINDO 0060: 57 53 5c 53 79 73 74 65 WS\Syste 0068: 6d 33 32 5c 76 73 73 76 m32\vssv 0070: 63 2e 65 78 65 20 20 20 c.exe 0078: 2d 20 55 73 65 72 3a 20 - User: 0080: 4e 54 20 41 55 54 48 4f NT AUTHO 0088: 52 49 54 59 5c 53 59 53 RITY\SYS 0090: 54 45 4d 20 20 20 20 20 TEM 0098: 2d 20 53 69 64 3a 20 20 - Sid: 00a0: 53 2d 31 2d 35 2d 31 38 S-1-5-18 This machine was converted p2v. I have no idea where to search for the problem and what to do. Google showed a few result but none of them were useful for me. Please help me. If you need further information I'll tell you - just ask!

    Read the article

  • Conky starts above windows in Ubuntu Maverick

    - by DesertIvy
    Hey guys, I did not run into this problem until I upgraded my Ubuntu box to Maverick Meerkat (10.10). Basically, whenever I start my computer, conky runs as expected, except it gets drawn over any windows that I load (see screenshot). To fix this for a single session, I simply restart conky by running killall conky; conky in a terminal. Conky gets re-drawn below active windows (namely, only appearing on my desktop), and does not have the border/drop-shadow, but I have to do this every time I start a new session. Is there a simple way to fix this? I have a small shell script that I run on startup, but it does not seem to solve the problem. #!/bin/bash sleep 10 && conky; sleep 5 && killall conky; conky; Below is the non-text part of my .conkyrc file. # Conky settings # background yes update_interval 1 cpu_avg_samples 2 net_avg_samples 2 override_utf8_locale yes double_buffer yes no_buffers yes text_buffer_size 2048 #imlib_cache_size 0 temperature_unit fahrenheit # Window specifications # own_window yes own_window_type override own_window_transparent yes own_window_hints undecorate,sticky,skip_taskbar,skip_pager,below border_inner_margin 0 border_outer_margin 0 minimum_size 200 250 maximum_width 200 alignment tr gap_x 220 gap_y 280 # Graphics settings # draw_shades no draw_outline no draw_borders no draw_graph_borders no # Text settings # use_xft yes xftfont caviar dreams:size=8 xftalpha 0.5 uppercase no temperature_unit celsius default_color FFFFFF # Lua Load # lua_load ~/.lua/scripts/clock_rings.lua lua_draw_hook_pre clock_rings

    Read the article

  • samba "username map" stopped to work

    - by Kris_R
    It was time to upgrade our group server (new HDs, problems with old installation of DRBD, etc..). Going as usually for CentOS i upgraded whole system from 6.3 to 6.4 The later one came with samba 3.6 as the old one was 3.5. I transferred most of users by copying /etc/password, /etc/shadow and samba accounts with pdbedit. Homes were on nfs-drive. The translation of unix accounts to samba accounts are located in /etc/samba/smbusers. Strangely enough on some windows clients there was problem to connect to samba-shares. In one case the only thing that worked was, instead of giving windows name, to use the unix account. In another one, it was possible to mount network drive and to open it in Windows Explorer, however other applications like "Total commander" at the attempt of opening this drive gave the message "Cannot connect to z:" (sometimes at this moment user/pass were requested). The smb.conf has following entries: [global] security = user passdb backend = tdbsam username map = /etc/samba/smbusers ... [Kris] comment = Kris's Private path = /SMB/Users/Kris writeable = yes read only = no browseable = yes users = krisr printable = no security mask = 0777 force security mode = 0 directory security mask = 0777 force directory security mode = 0 force create mode = 0775 force directory mode = 6775 The smbusers: # Unix_name = SMB_name1 SMB_name2 ... krisr = Kris Of course testparm runs without any errors. I was used from samba 3.5 to outputs of form Mapped user Kris to krisr. Nothing like this happens now. Just message check_sam_security: Couldn't find user Kris in passdb. I read on web that some guys had problem with 3.6 and security = ADS, but these were not helpful for me. I'm seriously thinking about downgrading back to samba 3.5 but before this step I wanted to ask if somebody knows the solution of these problems. p.s. i've asked this question at serverfault but no answer came. Maybe I have more luck with this forum. Sorry for duplicate if any of you reads both.

    Read the article

  • Failed to su after making a chroot jail

    - by arepo21
    On a 64 bit CentOS host I am using script make_chroot_jail.sh to put a user in a jail, not permitting it to see anything expect it's home at /home/jail/home/user1. I did it typing this: sudo ./make_chroot_jail.sh user1 after, when trying to connect to user1 first i was getting an error like: /bin/su: user guest does not exist i have fixed this by copying some missed libraries: sudo cp /lib64/libnss_compat.so.2 /lib64/libnss_files.so.2 /lib64/libnss_dns.so.2 /lib64/libxcrypt.so.2 /home/jail/lib64/ sudo cp -r /lib64/security/ /home/jail/lib64/ But now, when trying to connect to user1 typing su user1 and then typing it's password, i am getting this error: could not open session So the question is how to connect to user1 in this situation? P.S. Here are the permissions of some files, this might be helpful in order to provide a solution: -rwsr-xr-x 1 root root /home/jail/bin/su drwxr-xr-x 4 root root /home/jail/etc -rw-r--r-- 1 root root /home/jail/etc/pam.d/su -rw-r--r-- 1 root root /home/jail/etc/passwd -rw------- 1 root root /home/jail/etc/shadow UPDATE1 After some modifications i managed to connect to user1, but the session closes immediately! I guess this a PAM issue, however cant find a way to fix it. Here the log entry for close action from /val/log/secure: Oct 6 15:19:42 localhost su: pam_unix(su:session): session closed for user user1 What makes the session to exit immediately after launching?

    Read the article

  • How can I run Gnome or KDE locally in Cygwin?

    - by John Peter Thompson Garcés
    Apparently it is possible to do this using cygwin ports, as can be seen in screenshots. I followed this how-to to get apt-cygports set up, and I used it to install gnome-session. This how-to supposedly gives the commands needed to run Gnome or KDE, but whenever I try to run Gnome, a blank X-window pops up and then quickly disappears. Here is the terminal output: $ startx /usr/bin/dbus-launch gnome-session xauth: file /home/jpthomps/.serverauth.4168 does not exist Welcome to the XWin X Server Vendor: The Cygwin/X Project Release: 1.10.3.0 OS: Windows 7 Service Pack 1 [Windows NT 6.1 build 7601] (WoW64) Package: version 1.10.3-12 built 2011-08-22 XWin was started with the following command line: /usr/bin/X :0 -auth /home/jpthomps/.serverauth.4168 (II) xorg.conf is not supported (II) See http://x.cygwin.com/docs/faq/cygwin-x-faq.html for more information LoadPreferences: /home/jpthomps/.XWinrc not found LoadPreferences: Loading /etc/X11/system.XWinrc LoadPreferences: Done parsing the configuration file... winDetectSupportedEngines - DirectDraw installed, allowing ShadowDD winDetectSupportedEngines - Windows NT, allowing PrimaryDD winDetectSupportedEngines - DirectDraw4 installed, allowing ShadowDDNL winDetectSupportedEngines - Returning, supported engines 0000001f winSetEngine - Using Shadow DirectDraw NonLocking winScreenInit - Using Windows display depth of 32 bits per pixel winFinishScreenInitFB - Masks: 00ff0000 0000ff00 000000ff Screen 0 added at virtual desktop coordinate (0,0). MIT-SHM extension disabled due to lack of kernel support XFree86-Bigfont extension local-client optimization disabled due to lack of shared memory support in the kernel (II) AIGLX: Loaded and initialized /usr/lib/dri/swrast_dri.so (II) GLX: Initialized DRISWRAST GL provider for screen 0 winPointerWarpCursor - Discarding first warp: 637 478 (--) 5 mouse buttons found (--) Setting autorepeat to delay=500, rate=31 (--) Windows keyboard layout: "00000409" (00000409) "US", type 4 (--) Found matching XKB configuration "English (USA)" (--) Model = "pc105" Layout = "us" Variant = "none" Options = "none" Rules = "base" Model = "pc105" Layout = "us" Variant = "none" Options = "none" winBlockHandler - pthread_mutex_unlock() winProcEstablishConnection - winInitClipboard returned. winClipboardProc - DISPLAY=:0.0 winClipboardProc - XOpenDisplay () returned and successfully opened the display. xinit: XFree86_VT property unexpectedly has 0 items instead of 1 xinit: connection to X server lost waiting for X server to shut down winClipboardProc - winClipboardFlushWindowsMessageQueue trapped WM_QUIT message, exiting main loop. winClipboardProc - XDestroyWindow succeeded. winClipboardProc - Clipboard disabled - Exit from server winDeinitMultiWindowWM - Noting shutdown in progress

    Read the article

  • hosts file seems to be ignored

    - by z4y4ts
    I have almost fresh Ubuntu desktop box. OS was installed two weeks ago and updated from karmic repositories. Last week I had no problems with DNS. But this week something had changed. I'm not sure what and when, and not sure whether I changed any configs. So now I have some really weird situation. According to logs name resolving should work normally. /etc/hosts 127.0.0.1 localhost test 127.0.1.1 desktop /etc/host.conf order hosts,bind multi on /etc/resolv.conf # Generated by NetworkManager search search servers obtained via DHCP nameserver 192.168.0.3 /etc/nsswitch.conf passwd: compat group: compat shadow: compat hosts: files mdns4_minimal [NOTFOUND=return] dns mdns4 networks: files protocols: db files services: db files ethers: db files rpc: db files netgroup: nis But if fact it is not. user@test ~ping test PING localhost (127.0.0.1) 56(84) bytes of data. [skip] Pinging is ok. user@test ~host test test.mydomain.com has address xx.xxx.161.201 But pure I suspect that NetworkManager might cause this misbehavior, but don't know where to start to check it. Any thoughts, suggestions?

    Read the article

  • Users database empty after Samba3 to Samba4 migration on different servers

    - by ouzmoutous
    I have to migrate a Samba 3 to a new Samba 4 server. My problem is that the database on the samba 3 server seems a bit empty. The secrets.dtb file is only 20K whereas the “pbedit -L |wc -l”command give me 16970 lines. On my Samba3 /var/lib/samba is 1,5M After I had migrate the databse (following instructions on http://dev.tranquil.it/index.php/SAMBA_-_Migration_Samba3_Samba4), “pdbedit -L” command on the new server give me only : SAMBA4$, Administrator, dns-samba4, krbtgt and nobody. So I tried to create a VM with a Samba3. I added some users, done the same things I did for the migration and now I can see the users created on the VM. It’s like users on the Samba 3 server are in a sort of cache. I already migrate the /etc/{passwd,shadow,group} files and I can see users with the “getent passwd” command. Any ideas why my users are present when I use pdbedit but the database is so empty ? The global part of my smb.conf on the Samba 3 server : [global] workgroup = INTERNET netbios name = PDC-SMB3 server string = %h server interfaces = eth0 obey pam restrictions = Yes passdb backend = smbpasswd passwd program = /usr/bin/passwd %u passwd chat = *new* %n\n *Re* %n\n *pa* username map = /etc/samba/smbusers unix password sync = Yes syslog = 0 log file = /var/log/samba/log.%U max log size = 1000 socket options = TCP_NODELAY SO_RCVBUF=8192 SO_SNDBUF=8192 add user script = /usr/sbin/useradd -s /bin/false -m '%u' -g users delete user script = /usr/sbin/userdel -r '%u' add group script = /usr/sbin/groupadd '%g' delete group script = /usr/sbin/groupdel '%g' add user to group script = /usr/sbin/usermod -G '%g' '%u' add machine script = /usr/sbin/useradd -s /bin/false -d /dev/null '%u' -g machines logon script = logon.cmd logon home = \\$L\%U domain logons = Yes os level = 255 preferred master = Yes local master = Yes domain master = Yes dns proxy = No ldap ssl = no panic action = /usr/share/samba/panic-action %d invalid users = root admin users = admin, root, administrateur log level = 2

    Read the article

  • samba "username map" stopped to work after upgrade to 3.6

    - by Kris_R
    It was time to upgrade our group server (new HDs, problems with old installation of DRBD, etc..). Going as usually for CentOS i upgraded whole system from 6.3 to 6.4 The later one came with samba 3.6 as the old one was 3.5. I transferred most of users by copying /etc/password, /etc/shadow and samba accounts with pdbedit. Homes were on nfs-drive. The translation of unix accounts to samba accounts are located in /etc/samba/smbusers. Strangely enough on some windows clients there was problem to connect to samba-shares. In one case the only thing that worked was, instead of giving windows name, to use the unix account. In another one, it was possible to mount network drive and to open it in Windows Explorer, however other applications like "Total commander" at the attempt of opening this drive gave the message "Cannot connect to z:" (sometimes at this moment user/pass were requested). The smb.conf has following entries: [global] security = user passdb backend = tdbsam username map = /etc/samba/smbusers ... [Kris] comment = Kris's Private path = /SMB/Users/Kris writeable = yes read only = no browseable = yes users = krisr printable = no security mask = 0777 force security mode = 0 directory security mask = 0777 force directory security mode = 0 force create mode = 0775 force directory mode = 6775 The smbusers: # Unix_name = SMB_name1 SMB_name2 ... krisr = Kris Of course testparm runs without any errors. I was used from samba 3.5 to outputs of form Mapped user kris to krisr. Nothing like this happens now. Just message check_sam_security: Couldn't find user Kris in passdb. I read on web that some guys had problem with 3.6 and security = ADS, but these were not helpful for me. I'm seriously thinking about downgrading back to samba 3.5 but before this step I wanted to ask if somebody knows the solution of these problems.

    Read the article

  • Setup git repository on gentoo server using gitosis & ssh

    - by ikso
    I installed git and gitosis as described here in this guide Here are the steps I took: Server: Gentoo Client: MAC OS X 1) git install emerge dev-util/git 2) gitosis install cd ~/src git clone git://eagain.net/gitosis.git cd gitosis python setup.py install 3) added git user adduser --system --shell /bin/sh --comment 'git version control' --no-user-group --home-dir /home/git git In /etc/shadow now: git:!:14665:::::: 4) On local computer (Mac OS X) (local login is ipx, server login is expert) ssh-keygen -t dsa got 2 files: ~/.ssh/id_dsa.pub ~/.ssh/id_dsa 5) Copied id_dsa.pub onto server ~/.ssh/id_dsa.pub Added content from file ~/.ssh/id_dsa.pub into file ~/.ssh/authorized_keys cp ~/.ssh/id_dsa.pub /tmp/id_dsa.pub sudo -H -u git gitosis-init < /tmp/id_rsa.pub sudo chmod 755 /home/git/repositories/gitosis-admin.git/hooks/post-update 6) Added 2 params to /etc/ssh/sshd_config RSAAuthentication yes PubkeyAuthentication yes Full sshd_config: Protocol 2 RSAAuthentication yes PubkeyAuthentication yes PasswordAuthentication no UsePAM yes PrintMotd no PrintLastLog no Subsystem sftp /usr/lib64/misc/sftp-server 7) Local settings in file ~/.ssh/config: Host myserver.com.ua User expert Port 22 IdentityFile ~/.ssh/id_dsa 8) Tested: ssh [email protected] Done! 9) Next step. There I have problem git clone [email protected]:gitosis-admin.git cd gitosis-admin SSH asked password for user git. Why ssh should allow me to login as user git? The git user doesn't have a password. The ssh key I created is for the user expert. How this should work? Do I have to add some params to sshd_config?

    Read the article

  • Why Ubuntu could treat hosts file so strange?

    - by z4y4ts
    I have almost fresh Ubuntu desktop box. OS was installed two weeks ago and updated from karmic repositories. Last week I had no problems with DNS. But this week something had changed. I'm not sure what and when, and not sure whether I changed any configs. So now I have some really weird situation. According to logs name resolving should work normally. /etc/hosts 127.0.0.1 localhost test 127.0.1.1 desktop /etc/host.conf order hosts,bind multi on /etc/resolv.conf # Generated by NetworkManager search search servers obtained via DHCP nameserver 192.168.0.3 /etc/nsswitch.conf passwd: compat group: compat shadow: compat hosts: files mdns4_minimal [NOTFOUND=return] dns mdns4 networks: files protocols: db files services: db files ethers: db files rpc: db files netgroup: nis But if fact it is not. user@test ~ping test PING localhost (127.0.0.1) 56(84) bytes of data. [skip] Pinging is ok. user@test ~host test test.myviacube.com has address xx.xxx.161.201 But pure I suspect that NetworkManager might cause this misbehavior, but don't know where to start to check it. Any thoughts, suggestions?

    Read the article

  • PostgreSQL user authentication against PAM

    - by elmuerte
    I am trying to set up authentication via PAM for PostgreSQL 9.3. I already managed to get this working on an Ubuntu 12.04 server, but I am unable to get this working on a Centos-6 install. The relevant pg_hba.conf line: host all all 0.0.0.0/0 pam pamservice=postgresql93 The pam.d/postgressql93 is the default config shipped with the official postgresql 9.3 package: #%PAM-1.0 auth include password-auth account include password-auth When a user tries to authenticate the following is reported in secure log: hostname unix_chkpwd[31807]: check pass; user unknown hostname unix_chkpwd[31808]: check pass; user unknown hostname unix_chkpwd[31808]: password check failed for user (myuser) hostname postgres 10.1.0.1(61459) authentication: pam_unix(postgresql93:auth): authentication failure; logname= uid=26 euid=26 tty= ruser= rhost= user=myuser The relevant content of password-auth config is: auth required pam_env.so auth sufficient pam_unix.so nullok try_first_pass auth requisite pam_succeed_if.so uid >= 500 quiet auth required pam_deny.so account required pam_unix.so account sufficient pam_localuser.so account sufficient pam_succeed_if.so uid < 500 quiet account required pam_permit.so The problem is with the pam_unix.so. It is unable to validate the password, and unable to retrieve the user info (when I remove the auth entry of pam_unix.so). The Centos-6 install is only 5 days old, so it does not have a lot of baggage. The unix_chkpwd is suid and has execute rights for everybody, so it should be able to check the shadow file (which has no privileges at all?).

    Read the article

  • Exchange backup verification shows no files

    - by Olaf
    [SBS2003SP2] If i read the exhange log it shows the backup contains no files just folders and the total size seems to be Ok. I i try to restore the folders are empty... But the 14 files that where backupped dissapeared in the verification log?! Other backups on the same medium turned out to be fine. Any idea what's wrong here? This is my log: Backup Status Operation: Backup Active backup destination: File Media name: "testbackup.bkf created 2-6-2010 at 11:25" Volume shadow copy creation: Attempt 1. Backup of "SERVER1\Microsoft Information Store\First Storage Group" Backup set #1 on media #1 Backup description: "Set created 2-6-2010 at 11:25" Media name: "testbackup.bkf created 2-6-2010 at 11:25" Backup Type: Normal Backup started on 2-6-2010 at 11:26. Backup completed on 2-6-2010 at 12:21. Directories: 4 Files: 14 Bytes: 26.842.932.104 Time: 55 minutes and 38 seconds Verify Status Operation: Verify After Backup Active backup destination: File Active backup destination: \backup\Server1\Backup Files\testbackup.bkf Verify of "SERVER1\Microsoft Information Store\First Storage Group" Backup set #1 on media #1 Backup description: "Set created 2-6-2010 at 11:25" Verify started on 2-6-2010 at 12:21. Verify completed on 2-6-2010 at 12:47. Directories: 4 Files: 0 Different: 0 Bytes: 26.842.932.104 Time: 25 minutes and 46 seconds

    Read the article

< Previous Page | 34 35 36 37 38 39 40 41 42 43 44 45  | Next Page >