Search Results

Search found 4462 results on 179 pages for 'ssh'.

Page 38/179 | < Previous Page | 34 35 36 37 38 39 40 41 42 43 44 45  | Next Page >

• SSH ./config or ./Configure gives error

  - by JM4

  I am trying to install some packes on my machine running CentOS 5.5 but when i run ./config or ./Configure, I am returned: -bash: ./config: /bin/sh: bad interpreter: Permission denied -bash: ./Configure: Permission denied What do I need to change to correct the issue? I am connected as the root user

  Read the article

• scp stalls and ssh sessions freeze up (but eventually start again)

  - by coleifer

  I am running ubuntu on various computers on a home network. Some are on 9.04x64, some 10.04x64 and one 9.04x32. Running scp with a large file starts out at 2.1 mbps and drops down to about 200k, stalling and dropping until the transfer is complete. I've noticed this when I have a secure shell open on any of these servers as well. I have tried this with 2 different routers, both brand new, different brands.

  Read the article

• View Script Over SSH?

  - by user74781

  A friend, using a remote machine, ran a script that SSHed to my machine, and ran the following python script that resides on my machine: while (1): ....print "hello world" (this script simply prints 'hello world' continuously). I am now logged in to my machine. How can I see the output of the script my friend was running? if it helps, I can 'spot' the script my friend is using: me@home:~$ ps aux | grep justprint.py **friend 7494 12.8 0.3 7260 3300 ? Ss 17:24 0:06 python TEST_AREA/justprint.py** friend 7640 0.0 0.0 3320 800 pts/3 S+ 17:25 0:00 grep --color=auto just what steps should I take in order to view the "hello world" messages on my screen?

  Read the article

• how to do Putty SSH Auto-Login and Run Command File

  - by supportpb

  I am using the follwing to auto login and then run file containng a command. C:\path\to\putty.exe -load "[Sessionname]" -l [user] -pw [password] -m C:\path\to\commands.txt Commands.txt contains the following command ps -elf|grep 'sometext' but when I try to do so a new window for putty comes and exits instantly after login. I cannot see the output of command in commands.txt What is the problem;. Is there error in my approach or I need some more command to make the putty window pause for sometime before exiting.

  Read the article

• Rsync over ssh with root access on both sides

  - by Tim Abell

  Hi, I have one older ubuntu server, and one newer debian server and I am migrating data from the old one to the new one. I want to use rsync to transfer data across to make final migration easier and quicker than the equivalent tar/scp/untar process. As an example, I want to sync the home folders one at a time to the new server. This requires root access at both ends as not all files at the source side are world readable and the destination has to be written with correct permissions into /home. I can't figure out how to give rsync root access on both sides. I've seen a few related questions, but none quite match what I'm trying to do. I have sudo set up and working on both servers.

  Read the article

• Enabling Shell colours through Putty SSH

  - by Jon

  I have set a number of configurations in my .bashrc file to set the appearance of shell on my Redhat machine. However, when I login as root using Putty, the colours are not shown. I can enable them again by typing 'su', which simply puts me back to root like I was when I logged into putty, but that isn't exaclty ideal. Is there some configuration file or something I can use to enable shell colours when I login with Putty? Thanks

  Read the article

• share git rep access on unix machine with ssh

  - by Daniel

  at my school we have a student unix server with our accounts. i have installed git on my account, created a repository, and created the acl permissions on the folder repository so other users can access the repository # file: tp1 # owner: my_account # group: groupxxx user::rwx user:friend_account:rwx group::--- mask::rwx other::--- default:user::rwx default:user:friend_account:rwx default:group::--- default:mask::rwx default:other::--- but friend_account cant even cd to my tp1 directory (permission denied), so i think the problem should be in unix acl permissions..

  Read the article

• What is a good modern parallel SSH tool?

  - by faultyserver

  I have heard that pssh and clusterssh are two popular ones, but I thought I would open it to discussion here and see what the community's experiences with these tools were? What are the gotchas? Any decent hacks or use cases?

  Read the article

• scp stalls and ssh sessions freeze up (but eventually start again)

  - by coleifer

  I am running ubuntu on various computers on a home wireless network. Some are on 9.04x64, some 10.04x64 and one 9.04x32. Running scp with a large file starts out at 2.1 mbps and drops down to about 200k, stalling and dropping until the transfer is complete. I've noticed this when I have a secure shell open on any of these servers as well. I have tried this with 2 different routers, both brand new, different brands.

  Read the article

• SSH login without password prompt

  - by user477519

  I am trying to set up Opennebula. I want to set up my local host so that I can log into my remote host without having to use the password. I have followed the instructions in the "Secure Shell Access" section in the installation instructions. I can not log into my remote host from my local host, but I can log into my local host from my remote host. Not sure what's going on. Any help would be appreciated. Thanks

  Read the article

• very slow connection to ssh server from client (but not other servers)

  - by AntonOfTheWoods

  I have an Ubuntu 12.04 laptop that is taking so long to connect to various servers (in different data centres) that it seems like a bit of a lottery whether I'll actually get a connection. If I connect to the servers between themselves it's instantaneous, and I've set UseDNS no AddressFamily inet On the servers I'm connecting to (and rebooted for good measure). I also put in the reverse DNS+IP of the cable connection I'm connecting from. If I connect from the laptop via telnet: telnet my.server 22 Then the connection is also instantaneous, so it doesn't appear to be a problem with an intervening firewall. I have the same behaviour whether I connect with the IP, a short name in my hosts or the FQDN. I'm connecting with a 50mbps (cable, sync) connection so that doesn't appear to be the problem, and when I do finally get a connection then it's a good, quick, stable one. I have tried listening on another port (8000) and that makes no difference. Web and other connections from the laptop to the machine are also very good. Does anyone have any ideas here?

  Read the article

• Git clone using ssh - can't find repository

  - by Steve

  I'm trying to setup a Git server on Windows 7, using CopSsh, PuTTY and msysgit. I'm having problems cloning a repository using ssh. If I use a regular directory path, it works: $ git clone ~/vc/git/depot/test.git/ /c/dev/es/app Initialized empty Git repository in c:/dev/es/app/.git/ warning: You appear to have cloned an empty repository. Ssh, doesn't work. I've tried an different paths without success. $ git clone ssh://steve@test:4837/~/vc/git/depot/test.git/ /c/dev/es/app Initialized empty Git repository in c:/dev/es/app/.git/ fatal: '~/vc/git/depot/eastApp.git' does not appear to be a git repository fatal: The remote end hung up unexpectedly I followed the instructions from here: http://www.timdavis.com.au/git/setting-up-a-msysgit-server-with-copssh-on-windows/ Any clues?

  Read the article

• Access Samba Drive over SSH

  - by chrissygormley

  Hello, I am trying to access a samba drive over ssh. I have a windows machine with a samba drive to connect to my linux vm drive, I also run cygwin on the windows machine. What I am trying to do is from my linux vm ssh into the windows cygwin side and cd into the samba drive which connects back into my linux directory. When I am in cygwin I can see the drive as drive Z: but when I ssh into cygwin the Z: drive doesn't show up. Can anyone offer suggestions on how to get this working? Thanks

  Read the article

• ssh script gives "key_read" error

  - by lugte098

  I'm using a script that connects to a cluster through ssh and sends some commands, then quits the connection. This script basically connects once using ssh, then executes a script in this session. This script loops through a list of commands a few times and after it is finished, the connection is terminated. So this script works fine, except for the fact that after a few loops it gives me the following error at loop 22. And then again at loop 32. The loops do exactly the same thing, so i cannot grasp the problem the script is facing. This is the error: key_read: uudecode AAAAB3NzaC1yc2EAAAABIwAAAQEAxmNx2hcXLpTjuaa3yKC3B9gbF7KprP2/ CH8fBgMbCyIcOB+ZMQDmEnbVTqedBwV/mxjZzorEpHTM8MX2WsTjFsxwzDgcpuxm+3cwfb0WSy9Y4Kb F8crAsRDbBIpUZ2n/iSdRcds9nTjk6PA61kTS24RLACHpqF18vudlO5WcbCOnAwa+DdUs0Raw29UiQc BaC6M4YPnApq9Ayy7a6qFI2uK6efkwfLTZIDivWlIdLpRLEyuBEpozQQhEd0mrGhR/ Gl1GevRvFMms14130xQ4A5UpJSn6CmrRIWBkcgp1TilqDGQ1F5xZOinnc4C00gFrbT3hkkQqY5A9p node023,10.141.0.31 ssh-rsa AAAAB3NzaC1yc2EAAAABIwAAAQEAxmNx2hcXLpTjuaa3yKC3 B9gbF7KprP2/CH8fBgMbCyIcOB+ZMQDmEnbVTqedBwV/mxjZzorEpHTM8MX2WsTjFsxwzDgcpuxm+ 3cwfb0WSy9Y4KbF8crAsRDbBIpUZ2n/iSdRcds9nTjk6PA61kTS24RLACHpqF18vudlO5WcbCOnAw a+DdUs0Raw29UiQcBaC6M4YPnApq9Ayy7a6qFI2uK6efkwfLTZIDivWlIdLpRLEyuBEpozQQhEd0m rGhR/Gl1GevRvFMms14130xQ4A5UpJSn6CmrRIWBkcgp1TilqDGQ1F5xZOinnc4C00gFrbT3hkkQqY5 A9pa0lQHFkSw==

  Read the article

• Using ssh for remote command

  - by user1663479

  I need to use ssh to execute a remote command such as: ssh -l jsilva xman /vol/2011/linux_x64/exe/mx201111.exe When I execute ssh I receive error message: /cmg/2011.11/linux_x64/exe/mx201111.exe: error while loading shared libraries: libmkl_intel_lp64.so: cannot open shared object file: No such file or directory This application uses the variable LD_LIBRARY_PATH. I inserted this variable into /etc/profiles in localhost and remote host. The filesystem /cmg is mounted by autofs for both hosts (local and remote). Anybody have idea how to resolve this problem? Thanks!

  Read the article

• Cannot start jboss remotely in ruby (Net::SSH)

  - by Jared

  I am trying to start/stop jboss remotely with ruby Net::SSH library. I am able to stop jboss with the following code: require 'net/ssh' Net::SSH.start('xx.xx.xx.xx', 'jboss', :password => "jboss") do |session| session.open_channel do |channel| channel.request_pty(:term => 'xterm') do |ch, success| raise "could not request pty!" unless success channel.exec "/etc/init.d/jboss_new stop\n" end puts "shell opened" channel.on_data do |channel, data| puts data sleep 1 if data =~ /Password: / sleep 2 channel.send_data("jboss\n") end end end end But when I substitute stop with start I get nothing in return, jboss is not started. I changed password to invalid and get a response su: Authentication failure Is there any gimmick here? Can you please advise what is wrong?

  Read the article

• using sudo with mercurial and ssh authentication

  - by Shawn

  How do i run ssh-add key sudo hg clone [email protected]/etc/etc but use my ssh keys and not the superusers. Hey everyone, when i use sudo with for example, sudo hg clone [email protected]/etc/etc after i have added a key to my user account it doesnt work. I remember this is because the sudo is ran as the superuser but that user cannot have keys added to it. I remember setting some directive (im using debian) that allowed me to run that command as sudo, but still have my ssh keys taken from my normal user account but i didnt make a note of it at the time. Thanks.

  Read the article

• two scp and ssh processes with single authentication

  - by Tomek Wyderka

  I need to scp and then ssh to the same host. Is it possible to authenticate just one time? Is it possible to input password once, then scp file, then ssh on that host and work interactively? Update I get HOSTNAME and SSH_PASSWORD. I never log in on that machine before. I need to send some files (probably using scp) and then log in using ssh and work on that HOST interactively. I want to save time and input password just once. I have lots of such hosts...

  Read the article

• How to solve 'Connection refused' errors in SSH connection?

  - by frbry

  I have an Ubuntu Server 10.10 32-bit in my home. I'm making SSH connections to it from my PC via Putty. The problem is, sometimes I'm able to login seamlessly. However, sometimes it gives me an error like this: Network error: Connection refused. Then, I dont't change anything, try to login a few times more, wait a while and try again. Sometimes I can log in, sometimes I cannot. It seems pretty random to me. What can I do to solve this? Edit: And Sometimes, Putty gives Network error: Software caused connection abort error after displaying login as: text. Here is the ping -t output: Pinging 192.168.2.254 with 32 bytes of data: Reply from 192.168.2.254: bytes=32 time=6ms TTL=64 Reply from 192.168.2.254: bytes=32 time=65ms TTL=6 Reply from 192.168.2.254: bytes=32 time=88ms TTL=6 Reply from 192.168.2.254: bytes=32 time=1ms TTL=64 Reply from 192.168.2.254: bytes=32 time=3ms TTL=64 Reply from 192.168.2.254: bytes=32 time=1ms TTL=64 Reply from 192.168.2.254: bytes=32 time=1ms TTL=64 Reply from 192.168.2.254: bytes=32 time=1ms TTL=64 Reply from 192.168.2.254: bytes=32 time=1ms TTL=64

  Read the article

• Is there a software package that safely allows SSH via web on simple web host?

  - by spoulson

  I want to be able to use a secured web page on my shared web host to make SSH connections out to any destination. A shared web host is cheap and easy to maintain, and usually allows ssh to the web server. There are times I'd like to ssh into my web server, but don't have direct ssh connectivity. I'm aware of consoleFISH, Ajaxterm, and Anyterm. The problem is consoleFISH is a man-in-the-middle by design, and Ajaxterm/Anyterm require running a daemon process on the hosting server. Web hosts can usually support cron jobs, but not continuously running daemon processes. Additional Apache modules are usually out, too, as they require reconfiguration of the server and affects all other customers. Are there any software packages out there I can run on my shared web hosting account that provide a true ssh experience with these limitations?

  Read the article

• How to save two different ssh public keys to server?

  - by hemppa

  I have a CentOS-running server and I want to add ssh authentication for my laptop and desktop-computers. Both PCs are running Ubuntu. I managed to get it work with one computer. I added id_rsa.pub to my /home/$USER/.ssh/autheticated_keys-file. Then I disabled password protection so I can log in only if I have that ssh key on my computer. I tried to add that second id_rsa.pub-key to that authenticated_keys-file on my server, but it didn't work. Like this: cat id_rsa.pub >> /home/$USER/.ssh/authenticated_keys Is this the right way to do this? Or how to save two different public ssh keys on a server? (...and on a single user account)

  Read the article

• Can the same ssh key be used to access two different users on the same server?

  - by Nick

  I have an new ubuntu (hardy 8.04) server, it has two users, User1 and User2. User1 is listed in sudoers. I appended my public ssh key to authorized_keys in /home/user1/.ssh/authorized_keys, changed the permissions on user1/.ssh/ to 700 and user1/.ssh/authorized_keys to 600 and both file and folder are owned my User1. Then added I User1 to sshd_config (AllowUsers User1). This works and I can login into User1 debug1: Offering public key: /Users/nick/.ssh/id_rsa debug1: Server accepts key: pkalg ssh-rsa blen 277 debug1: Authentication succeeded (publickey). debug1: channel 0: new [client-session] debug1: Entering interactive session. Last login: Mon Mar 15 09:51:01 2010 from 86.141.61.197 I then copied the authorized_keys file to /home/user2/.shh/ and changed the permissions and ownership and added User2 to AllowUsers in sshd_config (AllowUsers User1 User2). Now when I try to login to User2 it will not authenticate the same public key. debug1: Offering public key: /Users/nick/.ssh/id_rsa debug1: Authentications that can continue: publickey debug1: Trying private key: /Users/nick/.ssh/identity debug1: Trying private key: /Users/nick/.ssh/id_dsa debug1: No more authentication methods to try. Permission denied (publickey). Am I missing something fundamental about the way ssh works? Thanks in advance, Nick

  Read the article

• Have an unprivileged non-account user ssh into another box?

  - by Daniel Quinn

  I know how to get a user to ssh into another box with a key: ssh -l targetuser -i path/to/key targethost But what about non-account users like apache? As this user doesn't have a home directory to which it can write a .ssh directory, the whole thing keeps failing with: $ sudo -u apache ssh -o StrictHostKeyChecking=no -l targetuser -i path/to/key targethost Could not create directory '/var/www/.ssh'. Warning: Permanently added '<hostname>' (RSA) to the list of known hosts. Permission denied (publickey). I've tried variations using -o UserKnownHostsFile=/dev/null and setting $HOME to /dev/null and none of these have done the trick. I understand that sudo could probably fix this for me, but I'm trying to avoid having to require a manual server config since this code will be deployed on a number of different environments. Any ideas? Here's a few examples of what I've tried that don't work: $ sudo -u apache export HOME=path/to/apache/writable/dir/ ssh -o StrictHostKeyChecking=no -o UserKnownHostsFile=path/to/apache/writable/dir/.ssh/known_hosts -l deploy -i path/to/key targethost $ sudo -u apache ssh -o StrictHostKeyChecking=no -o UserKnownHostsFile=path/to/apache/writable/dir/.ssh/known_hosts -l deploy -i path/to/key targethost $ sudo -u apache ssh -o StrictHostKeyChecking=no -o UserKnownHostsFile=/dev/null -l deploy -i path/to/key targethost Eventually, I'll be using this solution to run rsync as the apache user.

  Read the article

• How can I manage AWS VPC ssh access accounts and keys across multiple instances?

  - by deitch

  I am setting up a standard AWS VPC structure: a public subnet some private subnets, hosts on each, ELB, etc. Operational network access will be via either an ssh bastion host or an openvpn instance. Once on the network (bastion or openvpn), admins use ssh to access the individual instances. From what I can tell all of the docs seem to depend on a single user with sudo rights and a single public ssh key. But is that really best practice? Isn't it much better to have each user access each host under their own name? So I can deploy accounts and ssh public keys to each server, but that rapidly gets unmanageable. How do people recommend managing user accounts? I've looked at: IAM: It doesn't like like IAM has a method for automatically distributing accounts and ssh keys to VPC instances. IAM via LDAP: IAM doesn't have an LDAP API LDAP: set up my own LDAP servers (redundant, of course). Bit of a pain to manage, still better than managing on every host, especially as we grow. Shared ssh key: rely on the VPN/bastion to track user activities. I don't love it, but... What do people recommend? NOTE: I moved this over from accidentally posting in StackOverflow.

  Read the article

• Is it possible to use rsync over sftp (without an ssh shell)?

  - by Tom Feiner

  Rsync over ssh, works great every time. However, trying to rsync to a host which allows only sftp logins, but not ssh logins, provides the following error: rsync -av /source ssh user@remotehost:/target/ protocol version mismatch -- is your shell clean? (see the rsync man page for an explanation) rsync error: protocol incompatibility (code 2) at compat.c(171) [sender=3.0.6] Here's the relevant section from the rsync man page: This message is usually caused by your startup scripts or remote shell facility producing unwanted garbage on the stream that rsync is using for its transport. The way to diagnose this problem is to run your remote shell like this: ssh remotehost /bin/true > out.dat then look at out.dat. If everything is working correctly then out.dat should be a zero length file. If you are getting the above error from rsync then you will probably find that out.dat contains some text or data. Look at the contents and try to work out what is producing it. The most com- mon cause is incorrectly configured shell startup scripts (such as .cshrc or .profile) that contain output statements for non-interactive logins. Trying this on my system produced the following in out.dat: ssh-dummy-shell: Command not allowed. As I thought, the host is not allowing ssh logins. The following link shows that it is possible to accomplish this task using fuse with sshfs - however it is extremely slow, and not fit for production use. Is there any chance of getting rsync sftp to work?

  Read the article

< Previous Page | 34 35 36 37 38 39 40 41 42 43 44 45  | Next Page >