Search Results

Search found 43110 results on 1725 pages for 'noob question'.

Page 381/1725 | < Previous Page | 377 378 379 380 381 382 383 384 385 386 387 388  | Next Page >

• Laptop screen blank after login when external monitor is not connected

  - by Ramon Suarez

  Ubuntu does not switch back automatically to only monitor present when booting after disconnecting external monitor. Here's a video showing what happens. I get to the login window and everything looks ok, then I type my password, the desktop image shows up and... everything goes blank. It does not happen when I just login as a guest. When possible I work with my laptop connected to an external screen via the VGA port. The problem comes when I boot the computer without that secondary screen connected: The login screen comes out ok. After login the screen goes black, but I can hear the login sound. If I hit ctr + alt + backwards-delete and login again sometimes it is fixed, but not all. If I log in as a different user everything is OK. Then I log in as my user and sometimes it works. To have a screen I have to plug a monitor. Although I have turned on the laptop display with that monitor on, if I reboot it goes blank again after login, even if I turn off the external monitor before turning off the computer. I've managed to get my screen back with my username after going into recovery mode, but only sometimes. Failsafe would not load after second screen asking me what I wanted to do (no mouse to click nor keyboard working). My computer is a LDLC Aurore BB1-i5 -8 -S1. Which is the configuration file that keeps the information about the monitors using Displays under lightgdm and where is it? I guess if I could edit it I may have a chance :) One of the things I tried following a solution in another post was removing my monitors.xml file, but it does not work and I don't know how to create a good one that I could use now. When doing DISPLAY=:0 xrandrI get: Screen 0: minimum 320 x 200, current 320 x 200, maximum 8192 x 8192 LVDS1 connected (normal left inverted right x axis y axis) 1366x768 60.0 + 1360x768 59.8 60.0 1024x768 60.0 800x600 60.3 56.2 640x480 59.9 VGA1 disconnected (normal left inverted right x axis y axis) HDMI1 disconnected (normal left inverted right x axis y axis) DP1 disconnected (normal left inverted right x axis y axis) This is the full dmesg after activating sudo xdiagnoseas Bryce sugested. (If you tell me the relevant parts I will paste them here) When conecting the external monitor, only the external will work, although I can see using Displays that the computer thinks that both are working. I've asked the question in Launchpad but have it keeps on expiring without any feedback. In my opinion Ubuntu should be able to detect automatically that there is no external monitor present and switch to the laptop monitor. There's a similar question here, but it does not apply to my case External monitor set as primary even when disconnected from laptop Update: For clarification, the problem happens only with my user and once I log in. I even get to see the screensaver for about a second, and then it goes blank. Tried Bryce's example (see his answer below), but it did not work. This is the info I get from tty1 with Display=:0 xrandr: – Ramon Suarez Jul 9 at 16:36 Screen 0: minimum 320 x 200, current 320 x 200, maximum 8192 x 8192 LVDS1 connected (normal left inverted right x axis y axis) 1366x768 60.0 + 1360x768 59.8 60.0 1024x768 60.0 800x600 60.3 56.2 640x480 59.9 VGA1 disconnected (normal left inverted right x axis y axis) HDMI1 disconnected (normal left inverted right x axis y axis) DP1 disconnected (normal left inverted right x axis y axis)

  Read the article

• C# 4 Named Parameters for Overload Resolution

  - by Steve Michelotti

  C# 4 is getting a new feature called named parameters. Although this is a stand-alone feature, it is often used in conjunction with optional parameters. Last week when I was giving a presentation on C# 4, I got a question on a scenario regarding overload resolution that I had not considered before which yielded interesting results. Before I describe the scenario, a little background first. Named parameters is a well documented feature that works like this: suppose you have a method defined like this: 1: void DoWork(int num, string message = "Hello") 2: { 3: Console.WriteLine("Inside DoWork() - num: {0}, message: {1}", num, message); 4: } This enables you to call the method with any of these: 1: DoWork(21); 2: DoWork(num: 21); 3: DoWork(21, "abc"); 4: DoWork(num: 21, message: "abc"); and the corresponding results will be: Inside DoWork() - num: 21, message: Hello Inside DoWork() - num: 21, message: Hello Inside DoWork() - num: 21, message: abc Inside DoWork() - num: 21, message: abc This is all pretty straight forward and well-documented. What is slightly more interesting is how resolution is handled with method overloads. Suppose we had a second overload for DoWork() that looked like this: 1: void DoWork(object num) 2: { 3: Console.WriteLine("Inside second overload: " + num); 4: } The first rule applied for method overload resolution in this case is that it looks for the most strongly-type match first.  Hence, since the second overload has System.Object as the parameter rather than Int32, this second overload will never be called for any of the 4 method calls above.  But suppose the method overload looked like this: 1: void DoWork(int num) 2: { 3: Console.WriteLine("Inside second overload: " + num); 4: } In this case, both overloads have the first parameter as Int32 so they both fulfill the first rule equally.  In this case the overload with the optional parameters will be ignored if the parameters are not specified. Therefore, the same 4 method calls from above would result in: Inside second overload: 21 Inside second overload: 21 Inside DoWork() - num: 21, message: abc Inside DoWork() - num: 21, message: abc Even all this is pretty well documented. However, we can now consider the very interesting scenario I was presented with. The question was what happens if you change the parameter name in one of the overloads.  For example, what happens if you change the parameter *name* for the second overload like this: 1: void DoWork(int num2) 2: { 3: Console.WriteLine("Inside second overload: " + num2); 4: } In this case, the first 2 method calls will yield *different* results: 1: DoWork(21); 2: DoWork(num: 21); results in: Inside second overload: 21 Inside DoWork() - num: 21, message: Hello We know the first method call will go to the second overload because of normal method overload resolution rules which ignore the optional parameters.  But for the second call, even though all the same rules apply, the compiler will allow you to specify a named parameter which, in effect, overrides the typical rules and directs the call to the first overload. Keep in mind this would only work if the method overloads had different parameter names for the same types (which in itself is weird). But it is a situation I had not considered before and it is one in which you should be aware of the rules that the C# 4 compiler applies.

  Read the article

• Partner outreach on the Oracle Fusion Applications user experience begins

  - by mvaughan

  by Misha Vaughan, Architect, Applications User Experience I have been asked the question repeatedly since about December of last year: “What is the Applications User Experience group doing about partner outreach?”  My answer, at the time, was: “We are thinking about it.”  My colleagues and I were really thinking about the content or tools that the Applications UX group should be developing. What would be valuable to our partners? What will actually help grow their applications business, and fits within the applications user experience charter?In the video above, you’ll hear Jeremy Ashley, vice president of the Applications User Experience team, talk about two fundamental initiatives that our group is working on now that speaks straight to partners.  Special thanks to Joel Borellis, Kelley Greenly, and Steve Hoodmaker for helping to make this video happen so flawlessly. Steve was responsible for pulling together a day of Oracle Fusion Applications-oriented content, including David Bowin, Director, Fusion Applications Strategy, on some of the basic benefits of Oracle Fusion Applications.  Joel Borellis, Group Vice President, Partner Enablement, and David Bowin in the Oracle Studios.Nigel King, Vice President Applications Functional Architecture, was also on the list, talking about co-existence opportunities with Oracle Fusion Applications.Me and Nigel King, just before his interview with Joel. Fusion Applications User Experience 101: Basic education  Oracle has invested an enormous amount of intellectual and developmental effort in the Oracle Fusion Applications user experience. Find out more about that at the Oracle Partner Network Fusion Learning Center (Oracle ID required). What you’ll learn will help you uncover how, exactly, Oracle made Fusion General Ledger “sexy,” and that’s a direct quote from Oracle Ace Director Debra Lilley, of Fujitsu. In addition, select Applications User Experience staff members, as well as our own Fusion User Experience Advocates,  can provide a briefing to our partners on Oracle’s investment in the Oracle Fusion Applications user experience. Looking forward: Taking the best of the Fusion Applications UX to your customersBeyond a basic orientation to one of the key differentiators for Oracle Fusion Applications, we are also working on partner-oriented training.A question we are often getting right now is: “How do I help customers build applications that look like Fusion?” We also hear: “How do I help customers build applications that take advantage of the next-generation design work done in Fusion?”Our answer to this is training and a tool – our user experience design patterns – these are a set of user experience best-practices. Design patterns are re-usable, usability-tested, user experience components that make creating Fusion Applications-like experiences straightforward.  It means partners can leverage Oracle’s investment, but also gain an advantage by not wasting time solving a problem we’ve already solved. Their developers can focus on helping customers tackle the harder development challenges. Ultan O’Broin, an Apps UX team member,  and I are working with Kevin Li and Chris Venezia of the Oracle Platform Technology Services team, as well as Grant Ronald in Oracle ADF, to bring you some of the best “how-to” UX training, customized for your local area. Our first workshop will be in EMEA. Stay tuned for an assessment and feedback from the event.

  Read the article

• General website publishing questions involving domain forwarding issue

  - by Gorgeousyousuf

  Even though I have been having a certain level of knowledge and experience about web development I have never interested in obtaining a domain and publishing a website from my own server. Since today I have been struggling with getting my own domain and configuring it utilizing web sources. I started with learning the outline of web publishing process including web server installation, deploying a website for testing purpose,router port forwarding, getting a domain and forwarding domain to my router which will also forward http requests to my web server I am confused about some parts and so far could not get the web site accessed from outside of the network. All I try to do is just for learning purpose so I do not pay much attention to security issues for now. I have Server 2008 and IIS 7.5 installed. I use a laptop and have access to the modem over wireless and my modem is Zoom x6 5590. Well I will continue explaining what I have done so far and what I think will be after each action I did, I have successfully had access to my website on any local computer entering the internal ip address and port pair of the host machine in a browser. Next, I forwarded port 80 of my host machine creating a virtual server like 10.0.0.x(internal ip(static) of the host) - tcp - start port : 80 - end port : 80 in router options. Now I suppose every request that will come to the public Ip on port 80 will be forwarded to my host machine(10.0.0.x) over port 80. So If everyhing went as desired, the website listening on port 80 will accept the request and process the issue and finally respond bla bla bla... I suppose to access my website from outside of the network by entering http://MyPublicIp:80 in a browser but I couldn't accomplish this task by now despite using godady's domain forwarding tool,I see a small view of my website when I click the "preview" button that checks whether the address(http://publicip/Index.aspx) I entered where my domain will be forwarded is available or not. I am sure that configuring domain does not play a role in solving such a problem since using public ip and port matching does not help. So here is the first question, What is the fact that I face this problem? After that, I have couple of question regarding domain forwarding using godaddy tool. Can I forward my domain to a any port for example port 8080 other than default http port 80? Additionally, can I use a sub-domain to forward to a different port of the host? What I want to design is if the client enters www.mydomain.com, website1 will respond over a specified port and after when a client enters info.mydomain.com, another website which listens on different port will respond. I tried to add a sub-domain and forward it to a address like http://www.mydomain.com:8080/Index.aspx with no success. Can I really do that? Finally, what if I have a ftp site listening on the default port 21 and I create a domain like ftp.mydomain.com that will forward to that ftp site address. Is it possible to use sub-domains for ftp site access? I know I am more than confused but no matter whatever and however you reply to me, you will help me have a more clear view on this subject. Thank you very much from now.

  Read the article

• SharePoint 2010 Hosting :: Setting Default Column Values on a Folder Programmatically

  - by mbridge

  The reason I write this post today is because my initial searches on the Internet provided me with nothing on the topic.  I was hoping to find a reference to the SDK but I didn’t have any luck.  What I want to do is set a default column value on an existing folder so that new items in that folder automatically inherit that value.  It’s actually pretty easy to do once you know what the class is called in the API.  I did some digging and discovered that class is MetadataDefaults. It can be found in Microsoft.Office.DocumentManagement.dll.  Note: if you can’t find it in the GAC, this DLL is in the 14/CONFIG/BIN folder and not the 14/ISAPI folder.  Add a reference to this DLL in your project.  In my case, I am building a console application, but you might put this in an event receiver or workflow. In my example today, I have simple custom folder and document content types.  I have one shared site column called DocumentType.  I have a document library which each of these content types registered.  In my document library, I have a folder named Test and I want to set its default column values using code.  Here is what it looks like.  Start by getting a reference to the list in question.  This assumes you already have a SPWeb object.  In my case I have created it and it is called site. SPList customDocumentLibrary = site.Lists["CustomDocuments"]; You then pass the SPList object to the MetadataDefaults constructor. MetadataDefaults columnDefaults = new MetadataDefaults(customDocumentLibrary); Now I just need to get my SPFolder object in question and pass it to the meethod SetFieldDefault.  This takes a SPFolder object, a string with the name of the SPField to set the default on, and finally the value of the default (in my case “Memo”). SPFolder testFolder = customDocumentLibrary.RootFolder.SubFolders["Test"]; columnDefaults.SetFieldDefault(testFolder, "DocumentType", "Memo"); You can set multiple defaults here.  When you’re done, you will need to call .Update(). columnDefaults.Update(); Here is what it all looks like together. using (SPSite siteCollection = new SPSite("http://sp2010/sites/ECMSource")) {     using (SPWeb site = siteCollection.OpenWeb())     {         SPList customDocumentLibrary = site.Lists["CustomDocuments"];         MetadataDefaults columnDefaults = new MetadataDefaults(customDocumentLibrary);          SPFolder testFolder = customDocumentLibrary.RootFolder.SubFolders["Test"];         columnDefaults.SetFieldDefault(testFolder, "DocumentType", "Memo");         columnDefaults.Update();     } } You can verify that your property was set correctly on the Change Default Column Values page in your list This is something that I could see used a lot on an ItemEventReceiver attached to a folder to do metadata inheritance.  Whenever, the user changed the value of the folder’s property, you could have it update the default.  Your code might look something columnDefaults.SetFieldDefault(properties.ListItem.Folder, "MyField", properties.ListItem[" This is a great way to keep the child items updated any time the value a folder’s property changes.  I’m also wondering if this can be done via CAML.  I tried saving a site template, but after importing I got an error on the default values page.  I’ll keep looking and let you know what I find out.

  Read the article

• SQLAuthority News – Random Thoughts and Random Ideas

  - by pinaldave

  There are days when I keep on wondering about SQL, and even my life overall. Today is Saturday so I decided to write about SQL Server. Just like any other mornings, I woke up at 5 and opened my blog editor. I usually do not open Twitter or Facebook when I am planning to focus on my work, as they are little distractions for me. But today I opened my Twitter account and came across a very interesting quote from a friend: ‘Can I expect you to be different today?’ Well, I think it was very powerful quote for me to read first thing on a new day. This quote froze me for a while and made me think, “Do I really want to write about an SQL Server tip, or something different?”  After a little thinking, I’ve realized that for today I would go on and write something different. I am going to write about a few of the ideas and thoughts I had yesterday. After writing all these, I realized that if I am thinking so much in a day, and if I write a blog post of my random musing of the week or month, it can be so long (and boring). Here are some of my random thoughts I’d like to share with you: When the airplane lands, why does everybody get up and try to rush out when their luggage would be coming probably 20-30 minutes later? I really do not like this question when it was asked to me: “SQL Server is not using optimal index which I just created – how can I force it?” I am not going elaborate on this statement but you are allowed to in the comment section. Why do some people wish Good Morning even when they meet us after 4 PM? Can I optimize a query so much that it gives me a result before I execute it? Is it corruption when someone does their personal household work at office? The lane where I drive is always the slowest lane. Why waste time on correcting others when there are a lot of pending improvements for ourselves? If I have to get Tattoo, which SQL Server Execution Plan symbol should I get? Why do I reach office so early that the coffee machine is yet running its daily cleaning job? Why does every laptop have a ‘Page Up’ key at different locations on the keyboard? While I like color movies, I really appreciate black and white photographs. I do not appreciate statements like, “If I receive your books in PDF, I will spread it to many people to give you much greater exposure. So would you please send them to me ASAP?” Do not tell me, “Why does the database grow back after shrinking it every day?” I suggest you use “Search this blog” for the explanation. Petrol prices are currently at INR 74. I hope the rate remains there. Let me ask you the same question which started my day today:  “Can I expect you to be different today?” Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: About Me, PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology

  Read the article

• New JavaScript Editor

  - by Petr

  I did not write a blog post here for a few weeks. I think the last my post was  about releasing NetBeans 7.1 in the beginning of January. The reason is not that I would change the job:), but that I have concentrated on new JavaScript support/editor. The new JavaScript editor is written basically from scratch. The answer for the question "Why from beginning again, why do you just improve the old one?" is not easy and the decision has more aspects. One of the main reasons is that the old support was written 4 years ago and the architecture is limited. Also during the time, the APIs were changed and it was very hard to keep the editor up to date. Also there is a license issue etc. In short, it is time to rewrite the old JS editor.  We build up strong community about the PHP support in NetBeans and because many PHP developers also write JavaScript code I would like to ask you for a help. There is a continual PHP build with the new JavaScript support. You can download the result of the builds here. It's a zip file. You can unzip the file anywhere, where you want. I recommend to run the build with the new userdir, to avoid damaging your current userdir. It shouldn't happened, but just to be sure:). You can achieve this through the switch --userdir. So start the unzipped file from command line from the folder, where you unzipped it, can be done with this command on unix: bin/netbeans.sh --userdir /path/to/new/userdir and on windows: bin\netbeans.exe --userdir D:\path\to\new\userdir For the developers who use continual php build already, it's well known. There is also full IDE build with the new JavaScript support for people, who need more than only PHP support.  Because the builds with the new JavaScript editor is created from a branch, there are not nightly builds available. They will be, when we merge the branch to the trunk, but so far we have to work only with the mentioned continual build. We will merge our branch after branching NetBeans 7.2 from trunk. This is also answer for the question, what release of NetBeans will contain the new JS support. It should be the release after NetBeans 7.2. I'm asking you whether you could play with the builds or better, could work in the builds with new JavaScript support and tell us every issue that you run in. It can be everything what doesn't fit you, something doesn't work as you expected, something is slow, you want change the behaviour of a feature etc. Your input / comments are very important for us and it will help us to achieve the new JavaScript support that you need.  The best way how to communicate issues is through our Bugzilla, because it is simple to track them. Sure you can write comment here:), but still I prefer Bugzilla for any issue. You can click here (you should be already log in Bugzilla), a form for the new JavaScript issue is opened, with pre-filled component Editor and NO72 keyword. I will write about the single features later, but now I will mentioned a few features that should work in better way than in the old support.  Syntactic and semantic colouring Navigator Mark Occurrences and GoTo Declaration  Code Completion Code Completion is invoked through keyboard shortcut CTRL+SPACE. The first invocation offers items that are found through a source model. Almost all editor features are based on the model, that is build from source code. There is a lot of work on the model yet, but it should offer better results. When the pop up window with code completion items is open and you press CTRL+SPACE again, then the code completion offers all elements that are in the project. In the pictures all elements that starts with letter 't'. Formatter with many options and more :) A few features are not still implemented that are supported in the old JavaScript support (for example jQuery support), but we are adding this features ASAP.

  Read the article

• SQL – Business Intelligence: Derive Data or Information?

  - by Pinal Dave

  We all know the value of information in our lives. Whether it’s a personal decision or a business initiated one, people need it. But the question is: who is to make the distinction between data and information? We all come across a whole lot of data daily, that may be significant or not. We filter what’s required and forget about the rest. Information is filtered and distilled data. Filtering and distillation can also alter its actual meaning and natural state. Therefore, in this blog we discover some ways to ensure that we’re using business intelligence derived from the right information for making critical management decisions. Four key questions managers must ask themselves before making a decision: 1. Am I working with data or information? 2. What is it’s context? 3. How recent is it? 4. How was it derived or what is the source? The first question is probably the most important. You must know what you’re dealing with here. If you see use of adjectives and conclusions drawn, it’s information. Not raw data. You very next concern must be whether this is guised to present a particular viewpoint or perspective. It makes a lot of difference if you take a decision based on someone’s propaganda to distort real facts. Therefore, the context and the intentions of the distillation process must be clear to you. The next consideration is whether data is recent enough to hold any value. Since it has a very short shelf life, you must ensure that its context and value is not lost out of time. The last and the most important consideration is how was it derived in the first place. The observer effect is what calls the shots here. The source can change the context to a great extent if the collection methodology  and purpose is not clear. Gathering intelligence for decision making requires users to be keen observers and not take the information provided on its face value alone. These probing questions will allow you to make sure that you’re working with clean and accurate data devoid of any influence or manipulations. Only then can you be sure of deriving true business intelligence for your organization. BI technology is also a great way to ensure accuracy of reports. SQL BI Platform  provides advanced tools and techniques for all your BI needs and concerns. Koenig Solutions offers this course along with a host of other Business Intelligence and IT courses on all latest technologies available in the market today. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL

  Read the article

• Getting Started with StreamInsight 2.1

  - by Roman Schindlauer

  If you're just beginning to get familiar with StreamInsight, you may be looking for a way to get started. What are the basics? How can I get my first StreamInsight application running so I can see how it works? Where is the 'front door' that will get me going? If that describes you, then this blog entry might be just what you need. If you're already a StreamInsight wiz, keep reading anyway - you may find some helpful links here that you weren't aware of. But here's what we'd like from you experienced readers in particular: if you know of other good resources that we missed, please feel free to add them in the comments below. We appreciate you sharing your expertise. The Book The basic documentation for StreamInsight is located in the MSDN Library (Microsoft StreamInsight 2.1). You'll notice that previous versions of StreamInsight are still there (1.2 and 2.0), but if you're just getting started you can stick to the 2.1 section. The documentation has been organized to function as reference material, which is fine after you're familiar with the technology. But if you're trying to learn the basics, you might want to take a different path instead of just starting at the top. The following is one map you can use. What Is StreamInsight? Here is a sequence of topics that should give you a good overview of what StreamInsight is and how it works: Overview answers the question, "what is it?" StreamInsight Server Architecture gives you a quick look at a high-level architectural drawing StreamInsight Concepts lays out an overview of the basic components Deploying StreamInsight Entities to a StreamInsight Server describes the mechanics of how these components work together Getting an Example Running Once you have this background, go ahead and install StreamInsight and get a basic example up and running: Installation download and install the software StreamInsight Examples walk through a set of 3 simple StreamInsight applications that work together to demonstrate what you learned in the topics above; you can copy and paste the code into Visual Studio, compile, and run That's it - you now have a real, functioning StreamInsight system! Now that you have a handle on the basics, you might want to start digging deeper. Digging Deeper Here's a suggested path through the documentation to help you understand the next layer of StreamInsight technologies: Using Event Sources and Event Sinks sources supply data and sinks consume it; this topic gives you an overview of how they work Publishing and Connecting to the StreamInsight Server practical details on how to set up a StreamInsight server A Hitchhiker’s Guide to StreamInsight 2.1 Queries queries are the heart of how StreamInsight performs data analytics, and this whitepaper will help you really understand how they work Using StreamInsight LINQ root through this section for technical details on specific query components Using the StreamInsight Event Flow Debugger in addition to troubleshooting, the debugger is a great way to learn more about what goes on inside a StreamInsight application And Even Deeper Finally, to get a handle on some of the more complex things you can do with StreamInsight, dig into these: Input and Output Adapters adapters can be useful for handling more complex sources and sinks Building Resilient StreamInsight Applications a resilient application is able to recover from system failures Operations this section will help you monitor and troubleshoot a running StreamInsight system The StreamInsight Community As you're designing and developing your StreamInsight solutions, you probably will find it helpful to see working examples or to learn tips and tricks from others. Or maybe you need a place to post a vexing question. Here are some community resources that we have found useful. If you know of others, please add them in the comments below. Code samples and tools Official StreamInsight code samples Introduction to LinqPad Driver for StreamInsight 2.1 - LinqPad is a very useful tool for developing queries The following case studies are based on earlier versions of StreamInsight, but they still are useful examples: Microsoft Media Analytics - real-time monitoring and analytic Edgenet - responding to information from multiple source ICONICS - managing energy usage Blogs Microsoft StreamInsight Ruminations of J.net Richard Seroter's Architecture Musings pluralsight Forums MSDN StreamInsight Forum stackoverflow Training Microsoft StreamInsight Fundamentals (“Introducing StreamInsight” is free) from pluralsight Twitter @streaminsight   You’re a StreamInsight Expert That should get you going. Please add any other resources you have found useful in the comments below.   Regards, The StreamInsight Team

  Read the article

• What is the right way to process inconsistent data files?

  - by Tahabi

  I'm working at a company that uses Excel files to store product data, specifically, test results from products before they are shipped out. There are a few thousand spreadsheets with anywhere from 50-100 relevant data points per file. Over the years, the schema for the spreadsheets has changed significantly, but not unidirectionally - in the sense that, changes often get reverted and then re-added in the space of a few dozen to few hundred files. My project is to convert about 8000 of these spreadsheets into a database that can be queried. I'm using MongoDB to deal with the inconsistency in the data, and Python. My question is, what is the "right" or canonical way to deal with the huge variance in my source files? I've written a data structure which stores the data I want for the latest template, which will be the final template used going forward, but that only helps for a few hundred files historically. Brute-forcing a solution would mean writing similar data structures for each version/template - which means potentially writing hundreds of schemas with dozens of fields each. This seems very inefficient, especially when sometimes a change in the template is as little as moving a single line of data one row down or splitting what used to be one data field into two data fields. A slightly more elegant solution I have in mind would be writing schemas for all the variants I can find for pre-defined groups in the source files, and then writing a function to match a particular series of files with a series of variants that matches that set of files. This is because, more often that not, most of the file will remain consistent over a long period, only marred by one or two errant sections, but inside the period, which section is inconsistent, is inconsistent. For example, say a file has four sections with three data fields, which is represented by four Python dictionaries with three keys each. For files 7000-7250, sections 1-3 will be consistent, but section 4 will be shifted one row down. For files 7251-7500, 1-3 are consistent, section 4 is one row down, but a section five appears. For files 7501-7635, sections 1 and 3 will be consistent, but section 2 will have five data fields instead of three, section five disappears, and section 4 is still shifted down one row. For files 7636-7800, section 1 is consistent, section 4 gets shifted back up, section 2 returns to three cells, but section 3 is removed entirely. Files 7800-8000 have everything in order. The proposed function would take the file number and match it to a dictionary representing the data mappings for different variants of each section. For example, a section_four_variants dictionary might have two members, one for the shifted-down version, and one for the normal version, a section_two_variants might have three and five field members, etc. The script would then read the matchings, load the correct mapping, extract the data, and insert it into the database. Is this an accepted/right way to go about solving this problem? Should I structure things differently? I don't know what to search Google for either to see what other solutions might be, though I believe the problem lies in the domain of ETL processing. I also have no formal CS training aside from what I've taught myself over the years. If this is not the right forum for this question, please tell me where to move it, if at all. Any help is most appreciated. Thank you.

  Read the article

• Where can you find the Oracle Applications User Experience team in the next several months?

  - by mvaughan

  By Misha Vaughan, Applications User ExperienceNovember is one of my favorite times of year at Oracle. The blast of OpenWorld work is over, and it’s time to get down to business and start taking our messages and our work on the road out to the user groups. We’re in the middle of planning all of that right now, so we decided to provide a snapshot of where you can see us and hear about the Oracle Applications User Experience – whether it’s Fusion Applications, PeopleSoft, or what we’re planning for the next-generation of Oracle Applications.On the road with Apps UX...In December, you can find us at UKOUG 2012 in Birmingham, UK: UKOUG, UK Oracle User Group Conference 2012?December 3 – 5, 2012?ICC, Birmingham, UKIn March, we will be at Alliance 2013 in Indianapolis, and our fingers are crossed for OBUG Connect 2013 in Antwerp:? Alliance 2013March 17 - 20, 2013 ?Indianapolis, IndianaOBUG Benelux Connect 2013?March 26, 2013?Antwerp, Belgium?? In April, you will see us at COLLABORATE13 in Denver:? Collaborate13April 7 - April 11, 2013 ?Denver, Colorado?? And in June, we round out the kick-off to summer at OHUG 2013 in Dallas and Kscope13 in New Orleans:? OHUG 2013June 9 -13, 2013?Dallas, Texas ODTUG Kscope13?June 23-27, 2013 ?New Orleans, LA? The Labs & DemosAs always, a hallmark of our team is our mobile usability labs. If you haven’t seen them, they are a great way for customers and partners to get a peek at what Oracle is working on next, and a chance for you to provide your candid perspective. Based on the interest and enthusiasm from customers last year at Collaborate, we are adding more demo-stations to our user group presence in the year ahead. If you want to see some of the work we are doing first-hand but don’t have a lot of time, the demo stations are a great way to get a quick update on the latest wow-factor we are researching. I can promise that you will see whatever we think is new and interesting at the demo stations first. Oracle OpenWorld 2012 Apps UX DemostationFor Applications DevelopersMore and more, I get asked the question, “How do I build an application that looks like a Fusion?” My answer is Fusion Applications Design Patterns. You can find out more about how Fusion Applications developers can leverage ADF and the user experience best practices we developed for Fusion at sessions lead by Ultan O’Broin, Director of Global User Experience, in the year ahead. Ultan O'Broin, On Fusion Design Patterns Building mobile applications are also top of mind these days. If you want to understand how Oracle is approaching this strategy, check out our session on Mobile user experience design patterns with Mobile ADF.  In many cases, this will be presented by Lynn Rampoldi-Hnilo, Senior Manager of Mobile User Experiences, and in a few cases our ever-ready traveler Ultan O’Broin will be on deck. Lynn Rampoldi-Hnilo, on Mobile User Experience Design PatternsApplications User ExperiencesFusion Applications continues to evolve, and you will see the new face of Fusion Applications at our executive sessions in the year ahead, which are led by vice president Jeremy Ashley or a hand-picked presenter, such as one of our Fusion User Experience Advocates.  Edward Roske, CEO InterRel Consulting & Fusion User Experience AdvocateAs always, our strategy is to take our lessons learned and spread them across the Applications product lines. A great example is the enhancements coming in the PeopleSoft user experience, which you can hear about from Harris Kravatz, Senior Manager, PeopleSoft User Experience. Fusion Applications ExtensibilityWe can’t talk about Fusion Applications without talking about how to make it look like your business. If tailoring Fusion applications is a question in your mind, and it should be, you should hit one of these sessions. These sessions will be lead by our own Killian Evers, Senior Director, Tim Dubois, User Experience Architect, and some well-trained Fusion User Experience Advocates.Find out moreIf you want to stay on top of where and when we will be, you can always sign up for our newsletter or check out the events page of usableapps.

  Read the article

• Why would Copying a Large Image to the Clipboard Freeze a Computer?

  - by Akemi Iwaya

  Sometimes, something really odd happens when using our computers that makes no sense at all…such as copying a simple image to the clipboard and the computer freezing up because of it. An image is an image, right? Today’s SuperUser post has the answer to a puzzled reader’s dilemna. Today’s Question & Answer session comes to us courtesy of SuperUser—a subdivision of Stack Exchange, a community-driven grouping of Q&A web sites. Original image courtesy of Wikimedia. The Question SuperUser reader Joban Dhillon wants to know why copying an image to the clipboard on his computer freezes it up: I was messing around with some height map images and found this one: (http://upload.wikimedia.org/wikipedia/commons/1/15/Srtm_ramp2.world.21600×10800.jpg) The image is 21,600*10,800 pixels in size. When I right click and select “Copy Image” in my browser (I am using Google Chrome), it slows down my computer until it freezes. After that I must restart. I am curious about why this happens. I presume it is the size of the image, although it is only about 6 MB when saved to my computer. I am also using Windows 8.1 Why would a simple image freeze Joban’s computer up after copying it to the clipboard? The Answer SuperUser contributor Mokubai has the answer for us: “Copy Image” is copying the raw image data, rather than the image file itself, to your clipboard. The raw image data will be 21,600 x 10,800 x 3 (24 bit image) = 699,840,000 bytes of data. That is approximately 700 MB of data your browser is trying to copy to the clipboard. JPEG compresses the raw data using a lossy algorithm and can get pretty good compression. Hence the compressed file is only 6 MB. The reason it makes your computer slow is that it is probably filling your memory up with at least the 700 MB of image data that your browser is using to show you the image, another 700 MB (along with whatever overhead the clipboard incurs) to store it on the clipboard, and a not insignificant amount of processing power to convert the image into a format that can be stored on the clipboard. Chances are that if you have less than 4 GB of physical RAM, then those copies of the image data are forcing your computer to page memory out to the swap file in an attempt to fulfil both memory demands at the same time. This will cause programs and disk access to be sluggish as they use the disk and try to use the data that may have just been paged out. In short: Do not use the clipboard for huge images unless you have a lot of memory and a bit of time to spare. Like pretty graphs? This is what happens when I load that image in Google Chrome, then copy it to the clipboard on my machine with 12 GB of RAM: It starts off at the lower point using 2.8 GB of RAM, loading the image punches it up to 3.6 GB (approximately the 700 MB), then copying it to the clipboard spikes way up there at 6.3 GB of RAM before settling back down at the 4.5-ish you would expect to see for a program and two copies of a rather large image. That is a whopping 3.7 GB of image data being worked on at the peak, which is probably the initial image, a reserved quantity for the clipboard, and perhaps a couple of conversion buffers. That is enough to bring any machine with less than 8 GB of RAM to its knees. Strangely, doing the same thing in Firefox just copies the image file rather than the image data (without the scary memory surge). Have something to add to the explanation? Sound off in the comments. Want to read more answers from other tech-savvy Stack Exchange users? Check out the full discussion thread here.

  Read the article

• Converting openGl code to DirectX

  - by Fredrik Boston Westman

  First of all, this is kind of a follow up question on @byte56 excellent anwser on this question concerning picking algorithms. I'm trying to convert one of his code examples to directX 11 however I have run in to some problems ( I can pick but the picking is way off), and I wanted to make sure I had done it rigth before moving on and checking the rest of my code. I am not that familiar with openGl but I can imagine openGl has diffrent coordinations systems, and functions that alters how you must implement to code abit. This is his code example: public Ray GetPickRay() { int mouseX = Mouse.getX(); int mouseY = WORLD.Byte56Game.getHeight() - Mouse.getY(); float windowWidth = WORLD.Byte56Game.getWidth(); float windowHeight = WORLD.Byte56Game.getHeight(); //get the mouse position in screenSpace coords double screenSpaceX = ((float) mouseX / (windowWidth / 2) - 1.0f) * aspectRatio; double screenSpaceY = (1.0f - (float) mouseY / (windowHeight / 2)); double viewRatio = Math.tan(((float) Math.PI / (180.f/ViewAngle) / 2.00f))* zoomFactor; screenSpaceX = screenSpaceX * viewRatio; screenSpaceY = screenSpaceY * viewRatio; //Find the far and near camera spaces Vector4f cameraSpaceNear = new Vector4f((float) (screenSpaceX * NearPlane), (float) (screenSpaceY * NearPlane), (float) (-NearPlane), 1); Vector4f cameraSpaceFar = new Vector4f((float) (screenSpaceX * FarPlane), (float) (screenSpaceY * FarPlane), (float) (-FarPlane), 1); //Unproject the 2D window into 3D to see where in 3D we're actually clicking Matrix4f tmpView = Matrix4f(view); Matrix4f invView = (Matrix4f) tmpView.invert(); Vector4f worldSpaceNear = new Vector4f(); Matrix4f.transform(invView, cameraSpaceNear, worldSpaceNear); Vector4f worldSpaceFar = new Vector4f(); Matrix4f.transform(invView, cameraSpaceFar, worldSpaceFar); //calculate the ray position and direction Vector3f rayPosition = new Vector3f(worldSpaceNear.x, worldSpaceNear.y, worldSpaceNear.z); Vector3f rayDirection = new Vector3f(worldSpaceFar.x - worldSpaceNear.x, worldSpaceFar.y - worldSpaceNear.y, worldSpaceFar.z - worldSpaceNear.z); rayDirection.normalise(); return new Ray(rayPosition, rayDirection); } All rigths reserved to him of course This is my DirectX 11 code : void GraphicEngine::pickRayVector(float mouseX, float mouseY,XMVECTOR& pickRayInWorldSpacePos, XMVECTOR& pickRayInWorldSpaceDir) { float PRVecX, PRVecY; float nearPlane = 0.1f; float farPlane = 200.0f; floar viewAngle = 0.4 * 3.14; PRVecX = ((( 2.0f * mouseX) / ClientWidth ) - 1 ) * tan((viewAngle)/2); PRVecY = (1-(( 2.0f * mouseY) / ClientHeight)) * tan((viewAngle)/2); XMVECTOR cameraSpaceNear = XMVectorSet(PRVecX * nearPlane,PRVecY * nearPlane, -nearPlane, 1.0f); XMVECTOR cameraSpaceFar = XMVectorSet(PRVecX * farPlane,PRVecY * farPlane, -farPlane, 1.0f); // Transform 3D Ray from View space to 3D ray in World space XMMATRIX invMat; XMVECTOR matInvDeter; invMat = XMMatrixInverse(&matInvDeter, cam->getCameraView()); //Inverse of View Space matrix is World space matrix XMVECTOR worldSpaceNear = XMVector3TransformCoord(cameraSpaceNear, invMat); XMVECTOR worldSpaceFar = XMVector3TransformCoord(cameraSpaceFar, invMat); pickRayInWorldSpacePos = worldSpaceNear; pickRayInWorldSpaceDir = worldSpaceFar-worldSpaceNear; pickRayInWorldSpaceDir = XMVector3Normalize(pickRayInWorldSpaceDir); } A couple of notes: The mouse coordinates are already converted so that the top left corner of the client window would be (0,0) and the bottom rigth (800,600) ( or whatever resolution you would have) I hadn't used any far or near plane before, so i just made some arbitrary number up for them. To my understanding it shouldnt matter as long as the object you are trying to pick is in between the range of thoese numbers The viewAngle is the same angle that I used when setting the camera view with XMMatrixPerspectiveFovLH , I just hadn't made it a member variable of my Camera class yet. I removed the variable aspectRation and zoomFactor because I assumed that they where related to some specific function of his game. Now I'm not sure, but I think the problems lies either withing the mouse to viewspace conversion, maby that we use diffrent coordinations systems. Either that or how i transform the matrixes in the the end, because i know order is important when it comes to matrixes. Any help is appriciated! Thanks in advance. Edit: One more note, my code is in c++

  Read the article

• SQL SERVER – Identifying Column Data Type of uniqueidentifier without Querying System Tables

  - by pinaldave

  I love interesting conversations with related to SQL Server. One of my friends Madhivanan always comes up with an interesting point of conversation. Here is one of the conversation between us. I am very confident this blog post will for sure enable you with some new knowledge. Madhi: How do I know if any table has a uniqueidentifier column used in it? Pinal:  I am sure you know that you can do it through some DMV or catalogue views. Madhi: I know that but how can we do that without using DMV or catalogue views? Pinal: Hm… what can I use? Madhi: You can use table name. Pinal: Easy, just say SELECT YourUniqueIdentCol FROM Table. Madhi: Hold on, the question seems to be not clear to you – you do know the name of the column. The matter of the fact, you do not know if the table has uniqueidentifier column. Only information you have is table name. Pinal: Madhi, this seems like you are changing the question when I am close to answer. Madhi: Well, are you clear now? Let me say it again – How do I know if any table has a uniqueidentifier column and what is its value without using any DMV or System Catalogues? Only information you know is table name and you are allowed to return any kind of error if table does not have uniqueidentifier column. Pinal: Do you know the answer? Madhi: Yes. I just wanted to test your knowledge about SQL. Pinal: I will have to think. Let me accept I do not know it right away. Can you share the answer please? Madhi: I won! Here it goes! Pinal: When I have friends like you – who needs enemies? Madhi: (laughter which did not stop for a minute). CREATE TABLE t ( GuidCol UNIQUEIDENTIFIER DEFAULT newsequentialid() ROWGUIDCOL, data VARCHAR(60) ) INSERT INTO t (data) SELECT 'test' INSERT INTO t (data) SELECT 'test1' SELECT $rowguid FROM t DROP TABLE t This is indeed very interesting to me. Please note that this is not the optimal way and there will be many other ways to retrieve uniqueidentifier name and value. What I learned from this was if I am in a rush to check if the table has uniqueidentifier and I do not know the name of the same, I can use SELECT TOP (1) $rowguid and quickly know the name of the column. I can later use the same columnname in my query. Madhi did teach me this new trick. Did you know this? What are other ways to get the check uniqueidentifier column existence in a database? Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: PostADay, SQL, SQL Authority, SQL Puzzle, SQL Query, SQL Server, SQL Server Management Studio, SQL Tips and Tricks, T SQL, Technology

  Read the article

• When to use Aspect Oriented Architecture (AOA/AOD)

  When is it appropriate to use aspect oriented architecture? I think the only honest answer to this question is that it depends on the context for which the question is being asked. There really are no hard and fast rules regarding the selection of an architectural model(s) for a project because each model provides good and bad benefits. Every system is built with a unique requirements and constraints. This context will dictate when to use one type of architecture over another or in conjunction with others. To me aspect oriented architecture models should be a sub-phase in the architectural modeling and design process especially when creating enterprise level models. Personally, I like to use this approach to create a base architectural model that is defined by non-functional requirements and system quality attributes.   This general model can then be used as a starting point for additional models because it is targets all of the business key quality attributes required by the system.Aspect oriented architecture is a method for modeling non-functional requirements and quality attributes of a system known as aspects. These models do not deal directly with specific functionality. They do categorize functionality of the system. This approach allows a system to be created with a strong emphasis on separating system concerns into individual components. These cross cutting components enables a systems to create with compartmentalization in regards to non-functional requirements or quality attributes.  This allows for the reduction in code because an each component maintains an aspect of a system that can be called by other aspects. This approach also allows for a much cleaner and smaller code base during the implementation and support of a system. Additionally, enabling developers to develop systems based on aspect-oriented design projects will be completed faster and will be more reliable because existing components can be shared across a system; thus, the time needed to create and test the functionality is reduced.   Example of an effective use of Aspect Oriented ArchitectureIn my experiences, aspect oriented architecture can be very effective with large or more complex systems. Typically, these types of systems have a large number of concerns so the act of defining them is very beneficial for reducing the system’s complexity because components can be developed to address each concern while exposing functionality to the other system components. The benefits to using the aspect oriented approach as the starting point for a system is that it promotes communication between IT and the business due to the fact that the aspect oriented models are quality attributes focused so not much technical understanding is needed to understand the model.An example of this can be in developing a new intranet website. Common Intranet Concerns: Error Handling Security Logging Notifications Database connectivity Example of a not as effective use of Aspect Oriented ArchitectureAgain in my experiences, aspect oriented architecture is not as effective with small or less complex systems in comparison.  There is no need to model concerns for a system that has a limited amount of them because the added overhead would not be justified for the actual benefits of creating the aspect oriented architecture model.  Furthermore, these types of projects typically have a reduced time schedule and a limited budget.  The creation of the Aspect oriented models would increase the overhead of a project and thus increase the time needed to implement the system. An example of this is seen by creating a small application to poll a network share for new files and then FTP them to a new location.  The two primary concerns for this project is to monitor a network drive and FTP files to a new location.  There is no need to create an aspect model for this system because there will never be a need to share functionality amongst either of these concerns.  To add to my point, this system is so small that it could be created with just a few classes so the added layer of componentizing the concerns would be complete overkill for this situation. References:Brichau, Johan; D'Hondt, Theo. (2006) Aspect-Oriented Software Development (AOSD) - An Introduction. Retreived from: http://www.info.ucl.ac.be/~jbrichau/courses/introductionToAOSD.pdf

  Read the article

• Requesting feedback on my OO design

  - by Prog

  I'm working on an application that creates music by itself. I'm seeking feedback for my OO design so far. This question will focus on one part of the program. The application produces Tune objects, that are the final musical products. Tune is an abstract class with an abstract method play. It has two subclasses: SimpleTune and StructuredTune. SimpleTune owns a Melody and a Progression (chord sequence). It's play implementation plays these two objects simultaneously. StructuredTune owns two Tune instances. It's own play plays the two Tunes one after the other according to a pattern (currently only ABAB). Melody is an abstract class with an abstract play method. It has two subclasses: SimpleMelody and StructuredMelody. SimpleMelody is composed of an array of notes. Invoking play on it plays these notes one after the other. StructuredMelody is composed of an array of Melody objects. Invoking play on it plays these Melodyies one after the other. I think you're starting to see the pattern. Progression is also an abstract class with a play method and two subclasses: SimpleProgression and StructuredProgression, each composed differently and played differently. SimpleProgression owns an array of chords and plays them sequentially. StructuredProgression owns an array of Progressions and it's play implementation plays them sequentially. Every class has a corresponding Generator class. Tune, Melody and Progression are matched with corresponding abstract TuneGenerator, MelodyGenerator and ProgressionGenerator classes, each with an abstract generate method. For example MelodyGenerator defines an abstract Melody generate method. Each of the generators has two subclasses, Simple and Structured. So for example MelodyGenerator has a subclasses SimpleMelodyGenerator, with an implementation of generate that returns a SimpleMelody. (It's important to note that the generate methods encapsulate complex algorithms. They are more than mere factory method. For example SimpleProgressionGenerator.generate() implements an algorithm to compose a series of Chord objects, which are used to instantiate the returned SimpleProgression). Every Structured generator uses another generator internally. It is a Simple generator be default, but in special cases may be a Structured generator. Parts of this design are meant to allow the end-user through the GUI to choose what kind of music is to be created. For example the user can choose between a "simple tune" (SimpleTuneGenerator) and a "full tune" (StructuredTuneGenerator). Other parts of the system aren't subject to direct user-control. What do you think of this design from an OOD perspective? What potential problems do you see with this design? Please share with me your criticism, I'm here to learn. Apart from this, a more specific question: the "every class has a corresponding Generator class" part feels very wrong. However I'm not sure how I could design this differently and achieve the same flexibility. Any ideas?

  Read the article

• Best depth sorting method for a Top Down 2D game using a 3D physics engine

  - by Alic44

  I've spent many days googling this and still have issues with my game engine I'd like to ask about, which I haven't seen addressed before. I think the problem is that my game is an unusual combination of a completely 2D graphical approach using XNA's SpriteBatch, and a completely 3D engine (the amazing BEPU physics engine) with rotation mostly disabled. In essence, my question is similar to this one (the part about "faux 3D"), but the difference is that in my game, the player as well as every other creature is represented by 3D objects, and they can all jump, pick up other objects, and throw them around. What this means is that sorting by one value, such as a Z position (how far north/south a character is on the screen) won't work, because as soon as a smaller creature jumps on top of a larger creature, or a box, and walks backwards, the moment its z value is less than that other creature, it will appear to be behind the object it is actually standing on. I actually originally solved this problem by splitting every object in the game into physics boxes which MUST have a Y height equal to their Z depth. I then based the depth sorting value on the object's y position (how high it is off the ground) PLUS its z position (how far north or south it is on the screen). The problem with this approach is that it requires all moving objects in the game to be split graphically into chunks which match up with a physical box which has its y dimension equal to its z dimension. Which is stupid. So, I got inspired last night to rewrite with a fresh approach. My new method is a little more complex, but I think a little more sane: every object which needs to be sorted by depth in the game exposes the interface IDepthDrawable and is added to a list owned by the DepthDrawer object. IDepthDrawable contains: public interface IDepthDrawable { Rectangle Bounds { get; } //possibly change this to a class if struct copying of the xna Rectangle type becomes an issue DepthDrawShape DepthShape { get; } void Draw(SpriteBatch spriteBatch); } The Bounds Rectangle of each IDepthDrawable object represents the 2D Axis-Aligned Bounding Box it will take up when drawn to the screen. Anything that doesn't intersect the screen will be culled at this stage and the remaining on-screen IDepthDrawables will be Bounds tested for intersections with each other. This is where I get a little less sure of what I'm doing. Each group of collisions will be added to a list or other collection, and each list will sort itself based on its DepthShape property, which will have access to the object-to-be-drawn's physics information. For starting out, lets assume everything in the game is an axis aligned 3D Box shape. Boxes are pretty easy to sort. Something like: if (depthShape1.Back > depthShape2.Front) //if depthShape1 is in front of depthShape2. //depthShape1 goes on top. else if (depthShape1.Bottom > depthShape2.Top) //if depthShape1 is above depthShape2. //depthShape1 goes on top. //if neither of these are true, depthShape2 must be in front or above. So, by sorting draw order by several different factors from the physics engine, I believe I can get a really correct draw order. My question is, is this a good way of going about this, or is there some tried and true, tested way which is completely different and has somehow completely eluded me on the internets? And, if this does seem like a good way to remake my draw order sorting, what's the right sorting algorithm for reordering the Bounds Rectangle collision lists, and how do you deal with a Bounds Rectangle colliding with two different object which don't collide with eachother. I know these are solved problems, but I've only been programming for a year so any specific input here will be greatly appreciated. Thanks for reading this far, ye who made it -- sorry it was so long!

  Read the article

• Educational, well-written FOSS projects to read, study or discuss

  - by Godot

  Before you say it: yes, this "question" has been asked other times. However, I could not fine many of such questions and not that easily, and those I found had similar results. What I'm trying to say that there are no comprehensive lists of well written Open Source projects, so I decided to set some requirements for the entries (one or possibly more): Idiomatic use of the language in which they are written The project should be lightweight. Not as in "a few kbs", as in "clean" and possibly following the UNIX philosophy, making an efficient use of resources and performing its duty and nothing more. No code bloat, most importantly. Projects like Firefox and GNOME wouldn't qualify, for example. Minimal reliance on external, non-standard libraries, with exceptions for some common FOSS libraries (curses, Xlib, OpenGL and possibly "usual suspects" like gtk+, webkit and Boost). Reliance on well-written libraries is welcome. No reliance on proprietary software - for obvious reasons (programs that rely on XNA, DirectX, Cocoa and similar, for example). Well-documented code is welcome. Include link to web interfaces to their repositories if possible. Here are some sample projects that often pop up in these threads: Operating Systems Plan 9 from Bell Labs: More or less, the official "sequel" to UNIX. Written in C by the same people who invented C! NetBSD: The most portable BSD implementation, written in C and also a good example of portable and organized code. Network and Databases Sqlite: Extremely lightweight and extremely efficient, one of the best pieces of C software I've seen. Count the lines yourself! Lighttpd: A small but pretty reliable web server written in C. Programming languages and VMs Lua: extremely lightweight multi-paradigm programming language. Written in C. Tiny C Compiler: Really tiny C compiler. Not really comparable to GCC or Clang but does its job. PyPy: A Python implementation written in Python. Pharo: OK, I admit it, I'm not really a Smalltalk expert but Pharo is a fork of Squeak and looked rather interesting. Stackless Python - An implementation of Python that doesn't rely on the C call stack - written in C (with some parts in Python) Games and 3D: Angband: One of the most accessible roguelike codebases around here, written in C. Ogre3D: Cross-platform 3D engine. Gets bloated if you don't skip the platform-specific implementation code, otherwise is a pretty solid example of good C++ OO. Simon Tatham's Portable Puzzle Collection: Title says it all. Other - dwm: Lightweight window manager. Written in C. Emulation and Reverse Engineering - Bochs: x86 emulator, written in C++ and tiny enough. - MAME: If you want to see C at one of its lowest levels, MAME is for you. May not be as clean as the other projects but it can teach you A LOT. Before you ask: I didn't mention Linux because it has become quite bloated in the last few years, Linus has also confirmed it. Nonetheless, it'd be a great educational read the same, even if for other reasons. Same for GCC. Feel free to edit or wikify my post. I hope you won't lock my question, I'm only trying to organize a little community effort for the good of all those people who want to enhance their coding skills.

  Read the article

• Is a university education really worth it for a good programmer?

  - by Jon Purdy

  The title says it all, but here's the personal side of it: I've been doing design and programming for about as long as I can remember. If there's a programming problem, I can figure it out. (Though admittedly StackOverflow has allowed me to skip the figuring out and get straight to the doing in many instances.) I've made games, esoteric programming languages, and widgets and gizmos galore. I'm currently working on a general-purpose programming language. There's nothing I do better than programming. However, I'm just as passionate about design. Thus when I felt leaving high school that my design skills were lacking, I decided to attend university for New Media Design and Imaging, a digital design-related major. For a year, I diligently studied art and programmed in my free time. As the next year progressed, however, I was obligated to take fewer art and design classes and more technical classes. The trouble was of course that these classes were geared toward non-technical students, and were far beneath my skill level at the time. No amount of petitioning could overcome the institution's reluctance to allow me to test out of such classes, and the major offered no promise for any greater challenge in the future, so I took the extreme route: I switched into the technical equivalent of the major, New Media Interactive Development. A lot of my credits moved over into the new major, but many didn't. It would have been infeasible to switch to a more rigorous technical major such as Computer Science, and having tutored Computer Science students at every level here, I doubt I would be exposed to anything that I haven't already or won't eventually find out on my own, since I'm so involved in the field. I'm now on track to graduate perhaps a year later than I had planned, which puts a significant financial strain on my family and my future self. My schedule continues to be bogged down with classes that are wholly unnecessary for me to take. I'm being re-introduced to subjects that I've covered a thousand times over, simply because I've always been interested in it all. And though I succeed in avoiding the cynical and immature tactic of failing to complete work out of some undeserved sense of superiority, I'm becoming increasingly disillusioned by the lack of intellectual stimulation. Further, my school requires students to complete a number of quarters of co-op work experience proportional to their major. My original major required two quarters, but my current requires three, delaying my graduation even more. To top it all off, college is putting a severe strain on my relationship with my very close partner of a few years, so I've searched diligently for co-op jobs in my area, alas to no avail. I'm now in my third year, and approaching that point past which I can no longer handle this. Either I keep my head down, get a degree no matter what it takes, and try to get a job with a company that will pay me enough to do what I love that I can eventually pay off my loans; or I cut my losses now, move wherever there is work, and in six months start paying off what debt I've accumulated thus far. So the real question is: is a university education really more than just a formality? It's a big decision, and one I can't make lightly. I think this is the appropriate venue for this kind of question, and I hope it sticks around for the sake of others who might someday find themselves in similar situations. My heartfelt thanks for reading, and in advance for your help.

  Read the article

• What Counts For a DBA: Replaceable

  - by Louis Davidson

  Replaceable is what every employee in every company instinctively strives not to be. Yet, if you’re an irreplaceable DBA, meaning that the company couldn’t find someone else who could do what you do, then you’re not doing a great job. A good DBA is replaceable. I imagine some of you are already reaching for the lighter fluid, about to set the comments section ablaze, but before you destroy a perfectly good Commodore 64, read on… Everyone is replaceable, ultimately. Anyone, anywhere, in any job, could be sitting at their desk reading this, blissfully unaware that this is to be their last day at work. Morbidly, you could be about to take your terminal breath. Ideally, it will be because another company suddenly offered you a truck full of money to take a new job, forcing you to bid a regretful farewell to your current employer (with barely a “so long suckers!” left wafting in the air as you zip out of the office like the Wile E Coyote wearing two pairs of rocket skates). I’ve often wondered what it would be like to be present at the meeting where your former work colleagues discuss your potential replacement. It is perhaps only at this point, as they struggle with the question “What kind of person do we need to replace old Wile?” that you would know your true worth in their eyes. Of course, this presupposes you need replacing. I’ve known one or two people whose absence we adequately compensated with a small rock, to keep their old chair from rolling down a slight incline in the floor. On another occasion, we bought a noise-making machine that frequently attracted attention its way, with unpleasant sounds, but never contributed anything worthwhile. These things never actually happened, of course, but you take my point: don’t confuse replaceable with expendable. Likewise, if the term “trained seal” comes up, someone they can teach to follow basic instructions and push buttons in the right order, then the replacement discussion is going to be over quickly. What, however, if your colleagues decide they’ll need a super-specialist to replace you. That’s a good thing, right? Well, usually, in my experience, no it is not. It often indicates that no one really knows what you do, or how. A typical example is the “senior” DBA who built a system just before 16-bit computing became all the rage and then settled into a long career managing it. Such systems are often central to the company’s operations and the DBA very skilled at what they do, but almost impossible to replace, because the system hasn’t evolved, and runs on processes and routines that others no longer understand or recognize. The only thing you really want to hear, at your replacement discussion, is that they need someone skilled at the fundamentals and adaptable. This means that the person they need understands that their goal is to be an excellent DBA, not a specialist in whatever the-heck the company does. Someone who understands the new versions of SQL Server and can adapt the company’s systems to the way things work today, who uses industry standard methods that any other qualified DBA/programmer can understand. More importantly, this person rarely wants to get “pigeon-holed” and so documents and shares the specialized knowledge and responsibilities with their teammates. Being replaceable doesn’t mean being “dime a dozen”. The company might need four people to take your place due to the depth of your skills, but still, they could find those replacements and those replacements could step right in using techniques that any decent DBA should know. It is a tough question to contemplate, but take some time to think about the sort of person that your colleagues would seek to replace you. If you think they would go looking for a “super-specialist” then consider urgently how you can diversify and share your knowledge, and start documenting all the processes you know as if today were your last day, because who knows, it just might be.

  Read the article

• JPedal Action for Converting PDF to JavaFX

  - by Geertjan

  The question of the day comes from Mark Stephens, from JPedal (JPedal is the leading 100% Java PDF library, providing a Java PDF viewer, PDF to image conversion, PDF printing or adding PDF search and PDF extraction features), in the form of a screenshot: The question is clear. By looking at the annotations above, you can see that Mark has an ActionListener that has been bound to the right-click popup menu on PDF files. Now he needs to get hold of the file to which the Action has been bound. How, oh  how, can one get hold of that file? Well, it's simple. Leave everything you see above exactly as it is but change the Java code section to this: public final class PDF2JavaFXContext implements ActionListener {     private final DataObject context;     public PDF2JavaFXContext(DataObject context) {         this.context = context;     }     public void actionPerformed(ActionEvent ev) {         FileObject fo = context.getPrimaryFile();         File theFile = FileUtil.toFile(fo);         //do something with your file...     } } The point is that the annotations at the top of the class bind the Action to either Actions.alwaysEnabled, which is a factory method for creating always-enabled Actions, or Actions.context, which is a factory method for creating context-sensitive Actions. How does the Action get bound to the factory method? The annotations are converted, when the module is compiled, into XML registration entries in the "generated-layer.xml", which you can find in your "build" folder, in the Files window, after building the module. In Mark's case, since the Action should be context-sensitive to PDF files, he needs to bind his PDF2JavaFXContext ActionListener (which should probably be named "PDF2JavaFXActionListener", since the class is an ActionListener) to Actions.context. All he needs to do that is pass in the object he wants to work with into the constructor of the ActionListener. Now, when the module is built, the annotation processor is going to take the annotations and convert them to XML registration entries, but the constructor will also be checked to see whether it is empty or not. In this case, the constructor isn't empty, hence the Action should be context-sensitive and so the ActionListener is bound to Actions.context. The Actions.context will do all the enablement work for Mark, so that he will not need to provide any code for enabling/disabling the Action. The Action will be enabled whenever a DataObject is selected. Since his Action is bound to Nodes in the Projects window that represent PDF files, the Action will always be enabled whenever Mark right-clicks on a PDF Node, since the Node exposes its own DataObject. Once Mark has access to the DataObject, he can get the underlying FileObject via getPrimaryFile and he can then convert the FileObject to a java.io.File via FileUtil.getConfigFile. Once he's got the java.io.File, he can do with it whatever he needs. Further reading: http://bits.netbeans.org/dev/javadoc/

  Read the article

• NetworkManager Applet shows no networks

  - by Kkelk

  I am "the friend" referred to in the questions here and here. I decided to come and ask a question myself, as I can still not connect to the wireless network. I downloaded Keryx, as suggested here, and managed to download the necessary package and its dependencies. When I attempted to install the packages on Ubuntu using Keryx, Keryx just closed. Following this, I installed the packages manually using dpkg, and as far as I can tell, this was successful: kieran@ubuntu:~$ cd /host/wifi/Keryx/keryx/projects/Kieran/packages kieran@ubuntu:/host/wifi/Keryx/keryx/projects/Kieran/packages$ sudo dpkg -i *.deb [sudo] password for kieran: Selecting previously deselected package bcmwl-kernel-source. (Reading database ... 118296 files and directories currently installed.) Unpacking bcmwl-kernel-source (from bcmwl-kernel-source_5.60.48.36+bdcom-0ubuntu5_i386.deb) ... Selecting previously deselected package dkms. Unpacking dkms (from dkms_2.1.1.2-3ubuntu1.1_all.deb) ... Selecting previously deselected package fakeroot. Unpacking fakeroot (from fakeroot_1.14.4-1ubuntu1_i386.deb) ... Selecting previously deselected package linux-image. Unpacking linux-image (from linux-image_2.6.35.22.23_i386.deb) ... Selecting previously deselected package menu. Unpacking menu (from menu_2.1.44ubuntu1_i386.deb) ... Selecting previously deselected package patch. Unpacking patch (from patch_2.6-2ubuntu1_i386.deb) ... Setting up fakeroot (1.14.4-1ubuntu1) ... update-alternatives: using /usr/bin/fakeroot-sysv to provide /usr/bin/fakeroot (fakeroot) in auto mode. Setting up linux-image (2.6.35.22.23) ... Setting up menu (2.1.44ubuntu1) ... Setting up patch (2.6-2ubuntu1) ... Processing triggers for man-db ... Setting up dkms (2.1.1.2-3ubuntu1.1) ... Setting up bcmwl-kernel-source (5.60.48.36+bdcom-0ubuntu5) ... Loading new bcmwl-5.60.48.36+bdcom DKMS files... First Installation: checking all kernels... Building only for 2.6.35-22-generic Building for architecture i686 Building initial module for 2.6.35-22-generic Done. wl.ko: Running module version sanity check. - Original module - No original module exists within this kernel - Installation - Installing to /lib/modules/2.6.35-22-generic/updates/dkms/ depmod..... DKMS: install Completed. update-initramfs: deferring update (trigger activated) Processing triggers for install-info ... Processing triggers for doc-base ... Processing 31 changed 1 added doc-base file(s)... Registering documents with scrollkeeper... Processing triggers for menu ... Processing triggers for initramfs-tools ... update-initramfs: Generating /boot/initrd.img-2.6.35-22-generic Warning: No support for locale: en_GB.utf8 After rebooting, however, there were still no wireless networks in the NetworkManager Applet list. I opened the file /var/lib/NetworkManager/NetworkManager.state, and both NetworkEnabled and WirelessEnabled were set to True. While i'm very concious I may be asking a stupid question here, both my friend and I have nothing left to suggest, and as such - I would be very grateful for any answers as to how to get wireless working.

  Read the article

• How to Mentor a Junior Developer

  - by Josh Johnson

  This title is a little broad but I may need to give a little background before I can ask my question properly. I know that similar questions have been asked here already. But in my case I'm not asking if I should be mentoring someone or if the person is a good fit for being a software developer. That is not my place to judge. I have not been asked outright, but it is apparent that myself and other fellow senior developers are to mentor the new developers that start here. I have no problem with this whatsoever and, in many cases, it lends me a fresh perspective on things and I end up learning in the process. Also, I remember how beneficial it was in the beginning of my career when someone would take some time to teach me something. When I say "new developer" they could be anywhere from fresh out of college to having a year or two of experience. Recently and in the past we've had people start here who seem to have an attitude toward development/programming which is different from mine and hard for me to reconcile; they seem to extract just enough information to get the task done but not really learn from it. I find myself going over and over the same issues with them. I understand that part of this could be a personality thing, but I feel it's my job to do my best and sort of push them out of the nest while they're under my wing, so to speak. How can I impart just enough information so that they will learn but not give so much as to solve the problem for them? Or perhaps: What's the proper response to questions that are designed to take the path of least resistance and, in essence, force them to learn instead of take the easy way out? These questions are probably more general teaching questions and don't have that much to do specifically with software development. Note: I do not get a say in what tasks they are working on. Management doles the task out and it could be anything from a very simple bug fix to starting an entire application by themselves. While this is not ideal by any means and obviously presents its own gauntlet of challenges, I feel it's a topic best left for another question. So the best I can do is help them with the problem at hand and try to help them break it down into simpler problems and also check their commit logs and point out mistakes that they made. My main objectives are to: Help them out and give them the tools they need to start becoming more self-reliant. Steer them in the right direction and break bad development habits early on. Lessen the amount of time I spend with them (the personality type described above seems to need much more one-on-one time and does not do well over IM or email. While that's generally fine, I can't always stop what I'm working on, break my stride, and help them debug an error on a moments notice; I have my own projects that need to get done).

  Read the article

• Is It Worth It To Learn Experimental Languages

  - by Xander Lamkins

  I'm a young programmer who desires to work in the field someday as a programmer. I know Java, VB.NET and C#. I want to learn a new language (as I programmer, I know that it is valuable to extend what I know - to learn languages that make you think differently). I took a look online to see what languages were common. Everybody knows C and C++ (even those muggles who know so little about computers in general), so I thought, maybe I should push for C. C and C++ are nice but they are old. Things like Haskell and Forth (etc. etc. etc.) are old and have lost their popularity. I'm scared of learning C (or even C++) for this same reason. Java is pretty old as well and is slow because it's run by the JVM and not compiled to native code. I've been a Windows developer for quite a while. I recently started using Java - but only because it was more versatile and spreadable to other places. The problem is that it doesn't look like a very usable language for these reasons: It's most used purpose is for web application and cellphone apps (specifically Android) As far as actual products made with it, the only things that come to mind are Netbeans, Eclipse (hurrah for making and IDE with the language the IDE is for - it's like making a webpage for writing HTML/CSS/Javascript), and Minecraft which happens to be fun but laggy and bipolar as far as computer spec. support. Other than that it's used for servers but heck - I don't only want to make/configure servers. The .NET languages are nice, however: People laugh if I even mention VB.NET or C# in a serious conversation. It isn't cross-platform unless you use MONO (which is still in development and has some improvements to be made). Lacks low level stuff because, like Java with the JVM, it is run/managed by the CLR. My first thought was learning something like C and then using it to springboard into C++ (just to make sure I would have a strong understanding/base), but like I said earlier, it's getting older and older by the minute. What I've Looked Into Fantom looks nice. It's like a nice middleman between my two favorite languages and even lets me publish between the two interchangeably, but, unlike what I want, it compiles to the CLR or JVM (depending on what you publish it to) instead of it being a complete compile. D also looks nice. It seems like a very usable language and from multiple sources it appears to actually be better than C/C++. I would jump right with it, but I'm still unsure of its success because it obviously isn't very mainstream at this point. There are a couple others that looked pretty nice that focused on other things such as Opa with web development and Go by GOOGLE. My Question Is it worth learning these "experimental" languages? I've read other questions that say that if you aren't constantly learning languages and open to all languages that you aren't in the right mindset for programming. I understand this and I still might not quite be getting it, but in truth, if a language isn't going to become mainstream, should I spend my time learning something else? I don't want to learn old (or any going to soon be old) programming languages. I know that many people see this as something important, *but would any of you ever actually consider (assuming you didn't already know) FORTRAN? My goal is to stay current to make sure I'm successful in the future. Disclaimer Yes, I am a young programmer, so I probably made a lot of naive statements in my question. Feel free to correct me on ANYTHING! I have to start learning somewhere so I'm sure a lot of my knowledge is sketchy enough to have caused to incorrect statements or flaws in my thinking. Please leave any feelings you have in the comments.

  Read the article

• Managing game state / 'what to update' within an XNA game 'screen'

  - by codinghands

  Note - having read through other GDev questions suggested when writing this question I'm confident this isn't a dupe. Of course, it's 3am and I'm likely wrong, so please mod as such if so. I'm trying to figure out how best to manage state within my game screens - please bare with me though! At the moment I'm using a heavily modified version of the fantastic game state management example on the XNA site available here. This is working perfectly for my 'Screens' - 'IntroScreen' with some shiny logos, 'TitleScreen' and a 'MenuScreen' stacked on top for the title and menu, 'PlayScreen' for the actual gameplay, etc. Each screen has the a bunch of sprites, and an 'Update' and 'Draw', managed by a 'ScreenManager'. In addition to the above, and as suggested as an answer to my other question here, most screens have a 'GameProcessQueue' class full of 'GameProcess'es which lets me do just about anything (animations, youbetcha!), in any order, in sequence or parallel. Why mention all this? When I talk about managing game state I'm thinking more for complex scenarios within a 'Screen'. 'TitleScreen', 'MenuScreen' and the like are all relatively simple. 'Play Screen' less so. How do people manage the different 'states' within the screen (or whatever you call it) that 'does' gameplay? (for me, the 'PlayScreen') I've thought about the following: Enum of different states in the Screen, 'activeState' enum-type variable, switching on the enum in the Screen Update() loop to determine what Screen Update 'sub'-function is called. I can see this getting hairy pretty fast though as screens get more complex and with the 'PlayScreen' becoming a behemoth mega-class. 'State' class with Update loop - a Screen can have any number of 'States', 1+ of which are 'active'. Screen update loop calls update on all active states. States themselves know which screen they belong to, and may even belong to a 'StateManager' which handles transitioning from one state to the next. Once a state is over it's removed from the ScreenState list. The Screen doesn't need a bunch of GameProcessQueues, each State has its own. Abstract Screen further to be more flexible - I can see the similarities between what I've got (game 'Screens' handled by a ScreenManager) and what I want (states within a screen, and a mechanism to manage them). However at the moment I see 'Screens' as high level and very distinct ('PlayScreen' with baddies != 'MenuScreen' with 4 words and event handlers), where as my proposed 'States' are more intrinsically tied to a specific screen with complex requirements. I think. This is for a turn-based board game, so it's easier to define things as a discrete series of steps (IntroAnimation - P1Turn - P2Turn - P1Turn ... - GameOver - .... Obviously with an open-world RPG things are very different, but any advice in this scenario is appreciated. If I'm just going OOP-crazy please say so. Similarly I'm concious there's a huge amount on this site re: state management. But as my first 'serious' game after a couple of false starts I'd like to get this right, and would rather be harassed and modded down than never ask :)

  Read the article

< Previous Page | 377 378 379 380 381 382 383 384 385 386 387 388  | Next Page >