Search Results

Search found 11240 results on 450 pages for 'partition boot sector'.

Page 381/450 | < Previous Page | 377 378 379 380 381 382 383 384 385 386 387 388  | Next Page >

• How to specify console (or primary display) for video adapter?

  - by Igor Zinov'yev

  I have an ASUS ENGT440/DI1GD5 video adapter which has three output ports: D-Sub (HD-15), DVI and HDMI. I am using both the D-Sub and DVI ports, but my main monitor is connected to the DVI output. Everything works fine except for which monitor is designated the console during boot. The video adapter seems to prefer the D-Sub output for the console. When both the VGA and DVI monitors are connected, then the VGA monitor always becomes the console which displays the motherboard logo, POST information and booting progress. When only the DVI monitor is connected, then it becomes the console as desired. How do I make the video adapter always use the DVI output (instead of the VGA port) for the console while booting?

  Read the article

• Linux will not activate wireless after device has been re-enabled

  - by XHR

  Using a Eee 900A netbook by Asus. By pressing Fn + F2, I can disable or enable the wireless chip on the netbook, a blue LED indicates the status. I've been able to connect to wireless networks just fine with this netbook. However, if the wireless chip ever becomes disabled, I have to reboot to get my network connection back. This generally happens when suspending. For some reason the LED will be off and I have to hit Fn + F2 for it to light up again. However, after doing so, Linux will not reconnect to the network. It simply changes the wireless status from "wireless is disabled" to "device not ready". Even worse, I've recently had issues with the chip being enabled at boot, thus making it nearly impossible to get connected. I've searched around on-line but haven't found much of anything useful on this. This happens on all kinds of different distros including Ubuntu 9.10 Netbook, EeeBuntu 4 beta, Jolicloud and Ubuntu 10.04 Netbook.

  Read the article

• Where does truecrypt store the backup volume header?

  - by happygolucky

  When using WDE, where does (if anywhere) truecrypt store a backup volume header? As i know there is always a backup header for regular truecrypt volumes, however i am not sure if this applies when system encryption is used. Because if i damage the volume header in track 0, my password won't boot my system anymore. So there is no backup header on the drive? I read somewhere on a forum that truecrypt might have a backup header relative to some position from the END of the HDD, however this doesn't make sense as it could easily be wiped over by programs running in Windows. And how would truecrypt know where this backup is anyway?

  Read the article

• Windows 7 install crashes

  - by Alan Whitelaw

  I have a strange case that I cannot install windows 7 or windows vista on my 3 year old PC. The machine is an MSI K9NGM, with an AMD AM2 processor. I have bought a new Samsung SATA drive to install Windows 7 on, so as to preserve my existing XP install which I intend to dual boot in the future. However about half way through either a vista or w7 install (just after the mouse is shown for the first time, after the first restart) the machine will crash with a blue screen. I have removed, reordered the memory in the machine, with no luck. Does anyone have any experience of why this would happen with BOTH vista and w7 when everything is fine with XP?

  Read the article

• How to configure multiple addresses on a single interface using Fedora 16

  - by cg.

  I upgraded from Fedora 14 to 16, recently. I had two static IP v4 addresses configured on my ethernet interface by creating two files in /etc/sysconfig/network-scripts: ifcfg-eth0 -> first address ifcfg-eth0:1 -> second address After the upgrade, this resulted in an error message during the boot process and in only the second address being successfully configured on the interface. So, what is the correct way to configure multiple addresses on a single interface on Fedora 16? I could not find anything on this subject in the documentation so far.

  Read the article

• Swappable hard-drives for laptop

  - by lacqui

  I am bringing my old laptop for recycling, and removed my hard drive beforehand. The drive is a 320GB SATA drive, which is the same as my current laptop's drive. I would like to be able to easily swap between the two drives, in order to dual-boot that way. My laptop (Toshiba Satellite A500) needs a tiny Philip's screwdriver to get at the hard drive bay. I would like to replace that with something that is more easily changed, while still allowing the hard drive to rest on the desk. It can stick out a bit due to the laptop's feet, but not too far.

  Read the article

• Unreliable resume from suspend?

  - by dsimcha

  My desktop PC (home-built) resumes from suspend somewhat unreliably. I'd say that it resumes successfully about 85-90% of the time and hangs with a blank screen 5-10% of the time. As far as I can tell, the success or failure of the resume is completely random. I doubt it's a software problem because I triple boot Windows 7, Windows XP and Ubuntu and it's similar under all 3 operating systems. If it matters, my system is overclocked, though other than the resume-from-suspend issue, it's definitely rock stable. What are some of the obvious suspects that would cause random, sporadic failures to resume from suspend?

  Read the article

• Problem deleting files in Windows 7

  - by Alex Yan

  Happens sometimes but frequently enough to be a pain in the bum. I press Del or Shift + Del but the file stays there. Then when I try to delete it again, it says that I need permission from the Admin. For it to be deleted, usually I have to restart my computer List of things I've tried: I have admin privileges Hasn't happened since I reinstalled Windows and another form of this happened in my install before the last one I tried takeown in cmd but it says ERROR: Access is denied The files sometimes disappear by themselves after 2 mins or so Refreshing the folder doesn't do anything Unlocker doesn't work either. It asks me if I want to delete it the next boot Windows 7 x64 Pro HDD: Fujitsu MHZ2320BH G2 ATA 320 GB 8MB Buffer 5400 RPM

  Read the article

• Restoring the Fonts folder by using a restore point

  - by ryalho

  I am an idiot. Who would have thought that installing 2 gigs of fonts would be detrimental to the boot up time for the most common design programs such as adobe illustrator. I would like to restore the font folder because I am no longer able to just delete the fonts. It takes too long. So when I right-click the fonts folder and select "Restore Previous Versions" I am able to find a restore point, but the "Restore" button is greyed out. this leads me to think that I cannot change the settings of files in the windows directory. Oh and there are 34,000 fonts I need gone. Thanks

  Read the article

• Recovering data from a Silicon Image SiI3114 RAID

  - by Isaac Truett

  I have a set of 3 disks in RAID 5 originally created with a Silicon Image SiI3114 on-board RAID controller. The old motherboard is dead. The new motherboard (which has a different raid controller) won't boot from the array. I have no reason to believe that the drives are damaged or corrupted. I'm 99% sure that the problem is that the new controller isn't compatible or I'm not setting it up properly. Is it possible to recover data from the drives using a different controller? Would a PCI card like this one allow me to read from the array again?

  Read the article

• Install Windows with QEMU

  - by Radium

  I want to understand if it is possible to install Windows from Qemu to a physical HDD. I was trying to do that by doing something like this: qemu-system-x64 -m1024 -vnc :1 -hda /dev/sda -cdrom .../Windows.iso Installed successfully. But when i tried to boot normally got a blue screen telling me that a hardware change appeared so go away. I guess the problem is not because of QEMU-CPU emulation or smth, but because of HDD`s UID change which is used inside of Windows registry. Am i right? So if yes how to workaround this? Maybe i need to prepare Windows before the reboot? I have successfully installed FreeBSD via QEMU and thought with Windows it will go the same ...

  Read the article

• Delete Grub and OpenSuse but keep Windows 7.

  - by elvispt

  Hi. Here is my problem. I have OpenSuse installed alongside Windows 7. Grub is the boot loader from where I access OpenSuse and Windows 7. I want to delete Grub and also the OpenSuse partitions. My first, failed, approach was to insert the Win7 DVD, choose Repair your computer and then enter the commmand prompt. I then typed "bootrec /fixmbr" and restarted. It didn't worked. Grub was still there, so was Windows7. I then tried using "bootrec /fixboot and /rebuildbcd and neither worked. So what can I do to fix this? I remember when I was using WinXP this was much simpler. I would just type fixmbr and that was it. Any clues? Thank you.

  Read the article

• computer reboots randomly, can't find ssd

  - by John Barry

  My comp's been restarting at random times, and when it comes back the SSD drive can't be found by the BIOS and it doesn't boot. Powering down and starting up again fixes it 90% of the time, with a second reboot occasionally required. Does not seem to be heat related; it's never happened with me actually on the computer. It has happened while acting as the squeezebox server, however. It's a Sandy-Bridge i7 arch if that helps. To add: I've also run Windows Memtest and it came back with no issues.

  Read the article

• How can I fix a computer that is literally too slow to do anything?

  - by fredley

  I'm troubleshooting a Windows 7 PC for a friend. A couple of days ago it started running 'slow'. It turns out 'slow' is about 15 minutes to the first glimpse of the desktop, and another 30 to show icons. It is possible to open Task Manager, and nothing seems awry, CPU usage at 1-5%, plenty of memory free. The machine is clearly infested with malware though, in particular a program called 'Optimizer Pro' is demanding money to 'remove 5102 files slowing down my computer'. This seems highly suspicious. My problem is though, that I can't access msconfig (I left it for a couple of hours after having hopefully typed it into the Start Menu and hit enter - nothing seems to have loaded), or anything at all basically. I can boot from a Linux Live CD, but can I actually do anything useful from there? System Restore hasn't fixed it either, and Safe Mode exhibits the same behavior.

  Read the article

• Problem starting X in unbuntu 10.10

  - by xain

  Hi, I recently installed ubuntu 10.10 on my old toshiba a100 (where I've been running XP with no problems for ages). The installation went fine, I can log in with my user account, but after that the screen has only the wallpaper (and the mouse is enabled). Any hints on how to troubleshoot it ? These are the Xorg and the messages log files. Thanks When booted in safe graphics mode it worked just fine. Is there a way to set that configuration as the default so I don't have to go through those menus every time I boot ?

  Read the article

• Why am I unable to access the network shares on my own computer?

  - by DoomStone

  I am having some problems with media center computer, with Windows 7 on it. The computers IP address is 192.168.1.13, and another computer can without any problem navigate to \\192.168.1.13, but the computer itself can not. Neither \\servername nor \\localhost. If I reboot the computer a couple of times, it will work again, but this is a big problem as my computer cleans my media center library on boot and there, if it can not access \\192.168.1.13, it will think that all the files have been removed and therefore delete them from the database. I really have no idea on where to start with this problem, but if anyone has tried this before and fixed it, I would be very happy, as it would save me from having to reinstall the whole system.

  Read the article

• Smoothwall: How to stop live network traffic displayed in terminal?

  - by Jakobud

  For our network we are working on building a new firewall box and we just installed Smoothwall on it to test it out. When I start up the box, before the login prompt even appears, all of the live IP traffic is appearing in the terminal (source/destination IPs, MACs, Ports, etc). I wait for the boot sequence to finish, but all I see is this IP traffic. The login prompt never comes up. I finally get sick of waiting and press CTRL + C and it says "Entering Run Level 3" and then I get a login prompt finally. Once I login, the IP traffic continues to fly through the terminal even as I'm trying to type commands. How do I turn this stuff off? Is this the default setting for Smoothwall to have all this IP traffic going by on the screen? It essentially renders using the terminal to being useless.

  Read the article

• How to fix Ubuntu 10.10 black screen from terminal?

  - by none

  I'm trying to install Ubuntu Desktop 10.10 on an Intel Atom mainboard (Intel D945GCLF2) with CRT that has been running Ubuntu 9.x previously. Both, Desktop live CD / installer and alternate install CD cause the screen to go black (and the status LED blinks). I was able to get a bit further into the boot process with nomodeset as parameter with the Live CD, unfortunately I can't pass GRUB any parameters now that I have used the alternate Install CD by pressing 'e', it just boots. So now I have Ubuntu installed, I get a terminal with CTRL-ALT-F1 but I don't know what I need to do now or how to adjust resolution or video settings from command line.

  Read the article

• Logitech USB keyboard driver not found on Windows 7 x64

  - by AngCaruso

  I have a Logitech Internet 350 Keyboard which has been working fine on my Lenovo T400 laptop for well over three years. Just within the past week or so, Windows 7 can no longer find the driver for it. There is no custom driver from Logitech for this device -- it uses the generic Windows USB HID driver. The keyboard works just fine from the BIOS (and Linux which I dual boot this machine), but Windows 7 cannot find or load the driver for it. Any ideas? I smell a Windows update problem, but have no idea how to fix it, and I really am not interested in rolling back updates. New Info: I just tested a generic Dell USB keyboard and it worked just find, with Windows immediately recognizing the device and installing the HID keyboard class driver. So, it seems that Windows has decided not to recognize my specific Logitech keyboard device. I still suspect a Windows update issue, but I would love to hear other suggestions.

  Read the article

• Xorg fails to start under Ubuntu

  - by den-javamaniac

  I'm running desktop Ubuntu 9.10 on my Dell laptop. Previously it was Ubuntu 9.04. After some period of time (lets say 3-4 months) my X fails to start automatically after some restart calls. If that takes place my network manager applet doesn't start either (after I do startx). Can any one point out what I'm missing/what's the problem? EDDITED I get a perfect server boot meaning there's no Xorg started. Command line interface is all I get starting from login and further.

  Read the article

• Xorg fails to start under Ubuntu

  - by den-javamaniac

  I'm running desktop Ubuntu 9.10 on my Dell laptop. Previously it was Ubuntu 9.04. After some period of time (lets say 3-4 months) my X fails to start automatically after some restart calls. If that takes place my network manager applet doesn't start either (after I do startx). Can any one point out what I'm missing/what's the problem? EDDITED I get a perfect server boot meaning there's no Xorg started. Command line interface is all I get starting from login and further.

  Read the article

• Reset my windows server 2003

  - by Tim Thoirp

  I was recently given an HP Proliant Server from a friend as a gift. It has Windows Server 2003 installed on it. When I go to boot the system however to log in to Windows Server 2003 it requires an Admin password. I can't figure out the password and my friend doesn't know it either as it has been years since hes used the machine. I don't care about any of the data on the machine I just want to have a new clean version of Windows server 2003 running on it. Any advice would be helpful? And no I don't want to pay for a password cracking tool. Thanks

  Read the article

• Fusion 3, Windows 7, frequent blue screens

  - by kenny6127

  Is anyone else seeing this problem? A solution would be great (hey, it's Windows, it's gonna blue screen, just gotta deal with it), but it's also nice to know if it's something specific to my configuration, or if a lot of folks are having the same issue. Here's the details: * MacBook Pro 15" unibody, 4 GB, 2.4 GHz, 10.5.8 * Fusion 3.0.1 * Windows 7 Pro, 32-bit (clean install, not migrated from Boot Camp or anything) Blue screens happen nearly every time the MBP cover is closed for a short period of time (< 3 minutes). If the cover is closed for a half hour or longer, the VM is fine. I'm guessing it might be related to sleep, but that's hard to tell, and the Windows crash dump logs are pretty useless. Thanks!

  Read the article

• How to fix Asus Eee PC 900 startup issues after failure?

  - by EBrown

  My Asus Eee PC 900 shows no signs of life. I push the power button and get no response from anything. No lights, no power, no boot-up screen. It has been like this since I received it from a friend. I asked her what happened and she said that smoke came from the keyboard, it shut down and hasnt turned on since. I have tried removing and cleaning the RAM, the computer charger still connects and works, but the battery receives no charge and the computer won't power on. Any ideas as to what is going on?

  Read the article

• Bootstrapped Ubuntu 12.04 EC2 instance. Where to find log?

  - by nocode

  So I bootstrapped a shell script to install and run a bunch of tasks. Looks like the it ran for the most part, but I added one part and that was formatting an extra EBS volume. Pretty straightforward: mkfs.ext4 /dev/xvdf mkdir –m 000 /vol01 echo “/dev/xvdf /vol01 auto noatime 0 0” | sudo tee –a /etc/fstab sudo mount /vol01 I was able to install MongoDB, NGINX and Forever. I selected to use /dev/xdvf in the AWS console and see it. The 3rd line is not in fstab either. I've searched through various logs in /var/log/ but I don't really see much indicating the execution of the bootstrap. Logs that I see and looked through: auth.log boot.log dmesg dpkg.log syslog udev

  Read the article

< Previous Page | 377 378 379 380 381 382 383 384 385 386 387 388  | Next Page >