Search Results

Search found 13467 results on 539 pages for 'port mapping'.

Page 381/539 | < Previous Page | 377 378 379 380 381 382 383 384 385 386 387 388  | Next Page >

• How to specify which GCC for MacPorts to use?

  - by penyuan

  I compiled GCC 4.4.3 and installed it in /usr/local/bin, but whenever I install a port via MacPorts 1.8.2 the verbose output says MacPorts is using /usr/bin/gcc-4.2: checking for gcc... /usr/bin/gcc-4.2 How do I make MacPorts find my own GCC 4.4.3? Here is my existing path: /opt/local/bin:/opt/local/sbin:/usr/local/bin:/usr/local/lib:/usr/bin:/bin:/usr/sbin:/sbin:/usr/local/bin:/usr/X11/bin Thank you! P.S. I am running Mac OS X 10.6.2 Snow Leopard.

  Read the article

• Applications getting killed automatically

  - by nebi

  I am running httperf client on my m/c and after few seconds it is getting killed. dmesg shows: The command is: httperf --hog --client=0/1 --server=39.0.0.2 --port=80 --uri=/50kb --rate=20000 --send-buffer=4096 --recv-buffer=16384 --num-conns=6000000 --num-calls=1 Although I had done this test no. of times but never faced this error any time. From last two days I am observing this. My Ubuntu version is ubuntu 10.04. and httperf version is httperf-0.9.0 [ 2997.180620] Out of memory: kill process 7977 (apache2) score 70532 or a child [ 2997.180632] Killed process 7977 (apache2) [ 2997.184837] Out of memory: kill process 7971 (rsyslogd) score 8702 or a child [ 2997.184844] Killed process 7971 (rsyslogd) [ 2997.188823] Out of memory: kill process 7978 (apache2) score 1354 or a child [ 2997.188829] Killed process 7978 (apache2) [ 2997.192817] Out of memory: kill process 7973 (atd) score 561 or a child [ 2997.192822] Killed process 7973 (atd) [ 2997.196805] Out of memory: kill process 8102 (httperf) score 471 or a child [ 2997.196811] Killed process 8102 (httperf) Output of free command: total used free shared buffers cached Mem: 3862768 163000 3699768 0 2384 13068 -/+ buffers/cache: 147548 3715220 Swap: 3905528 0 3905528

  Read the article

• wamp server does not start: Windows 7, 64Bit

  - by Ram

  I am trying to install wamp server (following is the exact setup name) on windows 7, 64Bit OS. But it never starts, icon stays in orange color meaning some services did not start. wampserver2.2e-php5.3.13-httpd2.2.22-mysql5.5.24-x64 I have been searching from last 3hours but did not find any solution. Port 80 is not in use. In windows services, when I try to start wampapache service manually, it throws following error: Windows could not start the wampapache service on Local Computer. Error 1053: The service did not respond ot the start or control request in a timely fashion. apache_error.log is empty. Things use to work fine in windows XP. May be this is a repeated thread, but I did go through similar posts. But nothing worked! Please help!!

  Read the article

• Wifi and eth behavior

  - by r00ster

  I have a wireless router 150M Wireless Lite N Router Model No. TL-WR740N / TL-WR740ND. Normally, when I'm connected to the local network using eth0 I can ping other machines by issuing ping name. When I'm connected through wifi I have to issue ping name.domain.com. The machine is only visible in intranet. How to achieve the same behavior with wifi? The second problem is, that I can not connect to some external sites through wifi but through eth everything is ok. I guess that is related to some port forwarding, but I'm not sure. How can I resolve this issue? EDIT: I'm using Linux Mint.

  Read the article

• Remote connect to mysql server?

  - by LF4

  I've been trying to figure out why I keep getting this error when I try to connect to the MySQL server with the following commands. $~ mysql -u username -h SQLserver -p Enter password: ERROR 1045 (28000): Access denied for user 'username'@'myIP' (using password: YES) I've done the following: Port is open in the firewall other wise I wouldn't get the error it'd just timeout. MySQL server not running with skip-networking or bind-address username has host as '%' and I can connect locally so the password is correct. GRANT USAGE ON *.* TO username@% IDENTIFIED BY 'password'; FLUSH PRIVILEGES; I wanted to know if anyone had ideas or ran into this issue before and solved it? mysql> select user, host from mysql.user where user='username'; +----------+------+ | user | host | +----------+------+ | username | % | +----------+------+ 1 row in set (0.00 sec) mysql> show grants for 'username'; +----------------------------------------------------------------------------------------------------------------+ | Grants for username@% | +----------------------------------------------------------------------------------------------------------------+ | GRANT ALL PRIVILEGES ON *.* TO 'username'@'%' IDENTIFIED BY PASSWORD '*F42AD03PASSWORDHASHADF4021C86B' | | GRANT ALL PRIVILEGES ON `DB2`.* TO 'username'@'%' | +----------------------------------------------------------------------------------------------------------------+ 2 rows in set (0.00 sec)

  Read the article

• Device that connects to a switch via RJ45, that emulates a PC

  - by Mike Christiansen

  One of my co-workers once saw a device that plugged into a RJ45 jack, that emulated a PC. It could be configured with an IP address, and respond to pings. I was wondering if anyone knew about these, or even what they are called? This will be used to simulate a PC in a classroom environment. Thanks in advance. Edit: This is a CCNA classroom, we are looking to simulate a PC connected to an ethernet port on a router. These will be on different subnets, etc. This might be doable with a VM through VLANs and virtual switches, but then we are getting away from configuring the physical ports on the router the way we want to.

  Read the article

• How can I monitor network traffic in an all Mac home network?

  - by raiglstorfer

  I have an all Mac network consisting of an Airport Extreme, 1 MacPro, 1 Mac Mini, 2 MackBook Pros, 2 iPads, and 2 iPhones. The Mac Pro is connected directly to the Airport Extreme via Cat5 and the rest is all running via Wireless. Lately I've been getting prompted by Google to enter Capchas frequently. The message states that I might have software running on my network I'm not aware of. My wireless router is password protected using WPA2 Personal and I frequently change my password so I don't think someone is using the network from outside (but I've no way to confirm this). I'm looking for a relatively cheap (preferably open source) solution that would enable me to monitor and profile the network usage by machine and port. Can someone recommend a solution?

  Read the article

• Site on IIS 7.5 accessible via SSL on server, but not from local network

  - by bnieland

  I have a site set up on IIS 7.5. I added the following binding... type: https Host Name: [Blank] Port: 443 IP Address: 192.168.1.6 Binding Information: [Blank] I can access the site via https://192.168.1.6 from the server itself. When I try to access the site from another machine (193.168.1.4) on the same sub-net via https://192.168.1.6 I get no response. http://192.168.1.6 returns the site as expected. I have used wireshark to examine the packets on the server, the first of which I have included as an image. There were two other packets, very similar to this. There was no response from the server. Any Ideas?

  Read the article

• Intel Network Connection: This device cannot start. (Code 10)

  - by harryuser

  I have a Intel® Desktop Board DP55KG (see http://www.intel.com/products/desktop/motherboards/DP55KG/DP55KG-overview.htm), which has a Intel 82578DC Gigabit Network Connection on board. Additionally, I have a Intel PRO/1000 PT Dual Port Server Adapter in a PCI express slot and I am running Windows 7 Professional 32-bit. Also I am running with Intels latest network driver, in the 82578DC questions this means 11.6.92.0 with driver date 2010.04.12. The problem I am having is that the Intel 82578DC Gigabit Network Connection will not start on boot with the following message: "This device cannot start. (Code 10)". Disabling and then enabling the device after boot makes the network connection work again without any problems, but as soon as I reboot the problem occurs again. Any suggestion how to fix this? I have seen this problem on another Intel S3420GP board as well in Windows 7 that is.

  Read the article

• Regarding the functioning of the HTTP server

  - by Luv

  As all of us uses the HTTP protocol for accessing the web, and request at the port number 80 of the server, now suppose i want to browse or download a file then i will request to the HTTP server by specifying the complete URL. If the server is having file, it would return it if it is not having the file then what will it do? I think it will make the request to the appropriate server which would be having this file and get the file and return to us. In this way does the HTTP server acts as an intermediate between the client and the server? Please correct me if i am wrong here. Many many thanx in advance

  Read the article

• How can I monitor network traffic in an all Mac home network?

  - by raiglstorfer

  I have an all Mac network consisting of an Airport Extreme, 1 MacPro, 1 Mac Mini, 2 MackBook Pros, 2 iPads, and 2 iPhones. The Mac Pro is connected directly to the Airport Extreme via Cat5 and the rest is all running via Wireless. Lately I've been getting prompted by Google to enter Capchas frequently. The message states that I might have software running on my network I'm not aware of. My wireless router is password protected using WPA2 Personal and I frequently change my password so I don't think someone is using the network from outside (but I've no way to confirm this). I'm looking for a relatively cheap (preferably open source) solution that would enable me to monitor and profile the network usage by machine and port. Can someone recommend a solution?

  Read the article

• Help: My SSL Certificate expired but I can't renew this weekend, is there a way I can disable SSL through IIS?

  - by shogun

  Or perhaps force redirect to HTTP when they request HTTPS? I tried removing the SSL port settings under 'Advanced' but it broke the login page. I don't want to do a deploy/recompile right now but I am able to edit the VIEWS. However I am thinking there may be a way for IIS to do this, but then again I think the .NET code tries to force SSL. Crap. This is bull crap because I was bugging people about getting the new certificate since December and they were like oh we will take care of it... I think it may have even gotten to the point where they were getting annoyed with me hassling them about it! (rant over.) And yes, the key is that more support tickets will be caused by the browser giving a security error than if SSL was removed entirely for one day. Becaues they wouldn't very very likely not notice it being gone.

  Read the article

• Internal SATA hard disk shows up as removable device on Windows 7

  - by neutron80k

  I am running Windows 7 on an Acer Aspire M7720 with three internal SATA drives; drive #2 and #3 are on a removable HDD rack. Drive #3 (on the second removable HDD rack) shows up as removable device in the system tray. If I take drive #3 and put it in the first rack, it shows up as an internal drive. If I put any other drive in the second removable rack, that drive is also shown as removable device. I would like to fix that so that the drive in the second removable rack also is listed as internal drive. Since this seems to be independent of the actual drive in the rack, I checked the BIOS, but that third SATA port uses the same configuration as the second rack. So far, I could not find a solution for this problem (it's really more an annoyance than a problem), any ideas are welcome.

  Read the article

• VLC stream with trickplay

  - by marjasin

  The idea is to start a video stream from one computer and watch it on another with the ability to start/stop the stream. I think I could do this with VLC but i haven't been able to figure out how. I've tried the following: (From the official forum) Stream with RTSP and RTP: on the server, run: % vlc -vvv input_stream --sout '#rtp{dst=192.168.0.12,port=1234,sdp=rtsp://server.example.org:8080/test.sdp}' on the client(s), run: % vlc rtsp://server.example.org:8080/test.sdp But this doesn't give me the ability to start/stop the stream from the client. According to the VLC release note something called "Trick play" was added in version 1.0. This seems to be what I'm looking for but i can't find any documentation that descibes how to use it.

  Read the article

• Network connectivity issue

  - by kubiej21

  I am a novice cisco user and I am trying to investigate as to why one of our connections went down. We have a fiber network ring that is operating just fine. Connected to this ring via ethernet, is a lone 3560. This connection has worked flawlessly for the past year and a half. This morning, I noticed that I could not connect to that remote switch. I checked the configurations on both switches, and nothing has changed (as I expected). In the field, the port lights were flashing, indicating that some sort of communication is occurring. There is only 1 ethernet cable that has been run between these two locations, so testing an alternate path is not possible. What else can I do to fix this connection?

  Read the article

• Unable to connect to vrde virtualbox VM remotely

  - by b1ackjosh

  So I've remotely created my first headless using ssh. Now I'm attempting to connect to this VM using RDP so I can install Ubuntu Server, but I cannot get connected at all. When starting the VM everything appears fine: $ vboxheadless -s WebTesting Oracle VM VirtualBox Headless Interface 4.0.16 (C) 2008-2012 Oracle Corporation All rights reserved. VRDE server is listening on port 4455. And showvminfo shows: VRDE: enabled (Address 0.0.0.0, Ports 4455, MultiConn: off, ReuseSingleConn: off, Authentication type: null) However I'm still prompted with the "enter your credentials" screen every time I attempt to connect. From reading the documentation null shouldn't prompt me with this screen at all... Any help with this is greatly appreciated. P.S. I am using ssh tunneling in putty to tunnel in to my network.

  Read the article

• vSwitch configuration with 12 uplinks

  - by Joshua

  I have been doing a lot of research on vSwitch configurations, but I think I am more confused now after all of the reading that I have done. So here is my situation 3 ESX Hosts (12 nics each), 1 iSCSI SAN, 2 Force 10 switches. Should I create individual vSwitches for MGMT, vMotion, VM, and SCSI traffic? or do I need to group anything together in the same vSwitch? I am going to have 4 vLANS total, one for each of those items, do I need to do any trunking on the physical switch or just assign the correct vLAN to each physical switch port?

  Read the article

• USB 3.0 hub; what can it power?

  - by pouzzler

  I own an Asus UX31A laptop, equipped with 2 USB 3.0 ports. I would like to connect several USB devices to one of these ports, using a USB 3.0 hub. 1) Am I correct in assuming the Asus "USB Charger+" commercial blurb corresponds to the USB 3.0 standard "Battery Charging Specification 1.2", and furthermore inferring that the laptop can deliver 1.5A through a USB port? 2) Does a powered external USB 3.0 hard drive draw on the USB power lines? 3) I would like to connect the aforementionned drive, an android phone, and a 200mA rated optical mouse to an unpowered USB 3.0 hub, itself plugged into the laptop. Should my above assumptions be false, would this setup be able to power all three devices? Thanks to the usb guru who'll settle my fears to rest. Best regards, Sébastien

  Read the article

• Can't connect to service on ubuntu?

  - by user36914

  I have a service i just installed on a ubuntu workstation machine. Say its running under port 511. I can connect locally : telnet localhost 511 When i try to connect from a remote machine it fails telnet 192.168.0.1 511 Whats wierd is i tried to connect locally using the ip address and i get the following error: "Unable to connect to remote host: Connection Refused" I checked the status of the firewall: sudo ufw status and get back "status:inactive" So does anyone know why i can't connect remotely since the firewall is disabled and why can't i connect locally using its ip address. I don't know if this matters but its running under esxi.

  Read the article

• Cisco 1760 T1 Setup

  - by Joseph

  My 1760 has a WIC1-T1 card in Slot 0 and the slot 0 "OK" light is lit. When the router boots it shows that it sees the T1 card. I would like to configure my T1. I received the following details from my ISP: * Removed IP's IP Version: IPv4 Router Interface: edge1.mia1 -- t1-2/1/0:2:13 -- Switch Port: Vlan: WAN Network: 4.59.?.?/30 Level3 Side: 4.59.?.? Customer Side: 4.59.?.? Cust. LAN IPs: 4.59.?.?/27 The problem is that it is not listed under interfaces. I am a noob with IOS, please let me know if you need more details. Thanks.

  Read the article

• Dns.GetHostEntry is not giving me a good IP to pass to IPEndPoint function in my domain

  - by Beach Miles

  My c# code from my asynchronous socket client to get the address of my socket server. string testServerIP = "192.168.0.1"; IPHostEntry ipHostInfo = Dns.GetHostEntry(testServerIP); //time server address IPAddress ipAddress = ipHostInfo.AddressList[0]; IPEndPoint remoteEP = new IPEndPoint(ipAddress, port); I get the following error message from the above code. CheckServerReconnect:Cant connect to 192.168.0.1 The requested name is valid and was found in the database, but it does not have the correct associated data being resolved for

  Read the article

• Can't connect to server from certain machines

  - by Joel Coel

  On a small college campus we have a VLAN setup for the computer labs. These machines get assigned IP addresses in the 192.168.7.xxx range. In the server room, all of the server are on the default VLAN and assigned an IP address in the 10.1.1.xxx range. For the most part this works, but the lab machines are unable to connect to one of the servers. They can't even ping it. They can talk to other servers on the same switch as this server just fine. At first I thought it might be a vlan issue, but I changed the server port vlan to match other known-working ports with no effect. Any ideas?

  Read the article

• How to stop windows 7 from asking to format a disk?

  - by clinux

  Hey guys, I have this USB flash drive with a Linux partition that I use inside VirtualBox. Each time I insert it into the USB port, windows keeps asking if it should format it. Is there anyway to disable Windows from asking that? Thanks. EDIT: Disabling auto-run has not resolved the problem unfortunately. Windows will still check if the disk contains a partition it knows about, and ask to format if it doesn't know it. Really nice try though, any other ideas?

  Read the article

• ipfw is blocking access to a script

  - by user225551

  I need to figure out how to troubleshoot why ipfw is blocking my script. This script parses out some rss feeds over the net. I have about 10 different feed urls. About 5 or 6 of these urls are returning xml, the others are timing out. If I turn the firewall off, they will all work. The issue I'm having is that I have no idea what port I need to open for the urls that are timing out. Is there a command that will show me this?

  Read the article

• Can't access link in network using fully qualified domain name

  - by user1033715

  I have installed windows server 2003 and configured Domain controller (domain name - xyz.com) and DNS service. for that I have configured fully qualified domain name as server.xyz.com also I have installed apache tomcat with port 8080 on that server and accessed link successfully using "http://localhost:8080", "http://ip address of server:8080", "http://server.xyz.com:8080". but its working for local machine, and when I tried to access it from another machine in same network using "http://ip address of server:8080" its worked for me. but when I tried it using fully qualified domain name i.e. "http://server.xyz.com:8080" it's giving me error, "Could not connect to server.xyz.com" Please guide me getting this setup done. I need to be able to access this link "http://ip address of server:8080" as "http://server.xyz.com:8080" outside my network Any suggestion are highly appreciated..

  Read the article

< Previous Page | 377 378 379 380 381 382 383 384 385 386 387 388  | Next Page >