Search Results

Search found 31253 results on 1251 pages for 'custom url'.

Page 382/1251 | < Previous Page | 378 379 380 381 382 383 384 385 386 387 388 389  | Next Page >

• Apache mod_proxy with SSL not redirecting

  - by simonszu

  I have a custom server running behind an apache reverse proxy. Since the custom server can only handle HTTP traffic, i am trying to use apache for wrapping proper SSL around it, and for some kind of HTTP authentication. So i enabled mod_proxy and mod_ssl and modified sites-available/default-ssl. The config is as following: <Location /server> order deny,allow allow from all AuthType Basic AuthName "Please log in" AuthUserFile /etc/apache2/htpasswd Require valid-user ProxyPass http://192.168.1.102:8181/server ProxyPassReverse http://192.168.1.102:8181/server </Location> The custom server is accessible from the internal network via the location specified in the ProxyPass directive. However, when the proxy is accessed from the outside, it presents the login prompt, and after successfully authenticated, i get a blank page with the words The resource can be found at http://192.168.1.102:8181/server. When i type the external URL again in an already authenticated browser instance, i am properly redirected to the server frontend. The access.log is full of entrys stating that my browser does successful GET requests, and the proxy is happily serving the /server ressource. However, the ressource isn't containing the server's frontend, but this blank page with these words on it.

  Read the article

• rsyslog - template - regex data for insertion into db

  - by Mike Purcell

  I've been googling around the last few days looking for a solid example of how to regex a log entry for desired data, which is then to be inserted into a database, but apparently my google-fu is lacking. What I am trying to do is track when an email is sent, and then track the remote mta response, specifically the dsn code. At this point I have two templates setup for each situation: # /etc/rsyslog.conf ... $Template tpl_custom_header, "MPurcell: CUSTOM HEADER Template: %msg%\n" $Template tpl_response_dsn, "MPurcell: RESPONSE DSN Template: %msg%\n" # /etc/rsyslog.d/mail if $programname == 'mail-myapp' then /var/log/mail/myapp.log if ($programname == 'mail-myapp') and ($msg contains 'X-custom_header') then /var/log/mail/test.log;tpl_custom_header if ($programname == 'mail-myapp') and ($msg contains 'dsn=') then /var/log/mail/test.log;tpl_response_dsn & ~ Example log entries: MPurcell: CUSTOM HEADER Template: D921940A1A: prepend: header X-custom_header: 101 from localhost[127.0.0.1]; from=<[email protected]> to=<[email protected]> proto=ESMTP helo=<localhost>: headername: message-id MPurcell: RESPONSE DSN Template: D921940A1A: to=<[email protected]>, relay=gmail-smtp-in.l.google.com[2607:f8b0:400e:c02::1a]:25, delay=2, delays=0.12/0.01/0.82/1.1, dsn=2.0.0, status=sent (250 2.0.0 OK 1372378600 o4si2828280pac.279 - gsmtp) From the CUSTOM HEADER Template I would like to extract: D921940A1A, and X-custom_header value; 101 From the RESPONSE DSN Template I would like to extract: D921940A1A, and "dsn=2.0.0"

  Read the article

• MS Dynamics CRM users disappear

  - by Max Kosyakov

  Recently we came across quite a weird issue. The administrators say that once in a while they notice that user accounts in MS Dynamics CRM are lost . When a new user is added to the system, the administrators add him/her to the Active Directory first. Then, they go to Dynamics CRM interface, then to system configuration -> administration -> users and add the new user to the CRM, add roles to this user, grant them relevant permissions. Then the user is able to use a custom application, which connects to the Dynamics CRM via WCF. After a while (few weeks or months) the user is unable to use the custom application because Dynamics CRM cannot authorise this user. When administrators open the Dynamics CRM user management interface (configuration -> administration -> users ) and browse through the list of CRM users they cannot find the user in the list. When they try to add the user to Dynamics CRM back, the CRM fails with the error message "User already exists". Moreover, the user still exists in the Active Directory. The admins are very sure the user had been added to the CRM before he/she started to work. The only fact the the user was able to use the custom application normally says that the user had been indeed registered in the CRM. How come the user is not listed in the CRM user management interface at all? Have anyone faced any issues like that? Seen or heard of disappearing CRM users somewhere? Any help is appreciated. Where can one start digging?

  Read the article

• Can I use @import to import Kod's default style sheet into my own?

  - by Thomas Upton

  I understand that Kod is being actively developed and is prone to drastic changes in any area. I would like to modify some small things (like font face and size or certain colors) while still being able to benefit from any changes or updates to the default Kod stylesheet. I thought that I would be able to @import the default stylesheet into my own to achieve this. This is what ~/.kod/custom.css would look like, @import url("file:///Applications/Kod.app/Contents/Resources/style/default.css"); /* Change the default font face and color. */ body { font-family: Menlo, monospace; color: #efefef; } This stylesheet was set with the following defaults command, per the comments at the top of Kod's default CSS file: defaults write se.hunch.kod style/url ~/.kod/custom.css Unfortunately, this didn't work. When I first tried to reload the style, Kod crashed. It opened fine again, but the @import statement wasn't working, and Kod crashed every time I saved the custom.css file. Am I doing something wrong? Did I write my @import statement wrong? Is that not how @import is supposed to work? Did I miss some sort of documentation or Kod Google Groups post that mentions that Kod explicitly disallows this?

  Read the article

• Want to send my neighbors to a certain website via DNS, but don't have a clue how. [closed]

  - by Akku

  My neighbors have an unsecured WIFI router, and over the administration web-UI of the router I could log in as there was no password set. I don't know which of my neighbors these are, and I'd like to configure their router in a way that they come to my website instead of Google and Facebook, where I set up a warning in german. It this page: http://www.abelssoft.de/liebenachbarn/ Basically, I just want to see if and how this is possible - I'm aware that I could just set the WiFi-password and have them call their network provider to reset the thing, but I really want to see if this could work, because it would be a way cooler effect :-). So this router interface doesn't allow custom redirects, only filters. BUT I can set the DNS that is used, so I thought there might be the possibility to set up a custom DNS on a server, set it as the main DNS and redirect from Google to the URL above. Is this possible? If so, please try to detail a way that I have to go though to achive this. Note that I'm not the super-Linux-skilled person, I have a dyndns account and a Windows machine it points to as well as an Apache+Tomcat if that helps. I could also set up virtual machines on the windows server and redirect to those using a different port. Or is there maybe a webservice that provides such custom DNS?

  Read the article

• How to make Microsoft JVM work on Windows 7?

  - by rics

  I am struggling with the following problem. I cannot install MS JVM 3810 properly on Windows 7. When I start Interner Explorer 8 without starting any java 1.1 programs choosing Java custom settings under Internet options causes the crash of the browser. I have some Java 1.1 programs that work well in Internet Explorer 8 on Windows XP after the installation of MS JVM 3810. I know that it is not advised to use this old JVM but it is not a short-term option to port the programs in newer Java since it contains 3rd party components. Complete rewrite is a long-term plan. Strangely jview and appletviewer (jview /a) works from a console so the MS JVM 3810 is not completely busted just IE 8 does not like it. The problem with the appletviewer is that it cannot connect to the server even if both signed and unsigned content in Java custom settings have been set to Enable all. (Since Java custom settings was unreachable due to the crash the modifications - including My computer - were performed through the registry and pre-checked to behave correctly on Windows XP and Internet Explorer 8.) If jview was working then I could at least think of a workaround. Is there a way to configure MS JVM or jview properly on Windows 7? Another options would be: Checking Internet Explorer 9 Beta. Using virtualbox and Windows XP older IE in it. Delaying Windows 7 upgrade. ... Update Finally we have modified all the programs to work parallelly as applet and application as well. This way the programs can still be used from browser on older Windows versions. On Windows 7 the applications are started from the desktop. Installation to all user machine can easily be solved since they already have a large common application drive. The code update is fortunately only a few lines of modification: including a main method in the applet class. Furthermore instead of the starting html page a bat file is used to set the classpath before the startup with jview.

  Read the article

• Cannot Add Particular Word to Dictionary

  - by WCWedin

  I am trying to add a particular word to my custom dictionary using Word 2007. (The word happens to be "deserialized".) When I right-click on the word and click Add to Dictionary, the red underline does not go away. When I use the Spelling & Grammar tool from the Review tab on the ribbon, it will stop on that word; clicking the Add to Dictionary button has no effect. Oddly, I am able to add other words to the custom dictionary without a problem. I recently added "deserializes", for instance. I have only encountered this problem with that one particular word. Does anyone know what might be wrong and how I might fix it? Clarifications My document and all its content is set to English (United States). My custom dictionary is set to apply to All Languages, which is the default value. "Serialize" is in the US English default dictionary, but "deserialize" and its various forms is not.

  Read the article

• allow public access to subfolder of protected folder on apache

  - by UnnamedMook

  I have password-protected the root folder of my website while i do maintenance, but I want to display a custom 401 error page to let people know the site is under construction. Unfortunately, my web host doesn't allow me write access to anything outside the root folder of my website, so this custom error page must by stored in the root folder or one of its subfolders. Instead of my custom error page I get the Apache default error page and it also says "Additionally, a 401 Authorization Required error was encountered while trying to use an ErrorDocument to handle the request." I searched for ways to make a subfolder of a protected directory public, and all I could find was to use the "Satisfy any" directive, but this doesn't work for me. It doesn't work on a file-only basis either, as with the .htaccess file below. #Authorization Restriction AuthType Basic AuthName "Access to root" AuthUserFile ********************************* Require user *********** Order Allow,Deny Satisfy any #Error Documents ErrorDocument 401 Error-401.html #Allow access to error documents <Files Error-*,html> Order Deny,Allow Allow from all Satisfy any </Files> I can only use .htaccess files; I don't have access to httpd.conf

  Read the article

• [deb-5.0] Setup DNS on my server so I can put my IPs in as nameservers of my domain provider

  - by Maurycy Zarzycki

  Basically, my unmanaged VPS provider doesn't supply me with nameserver which I can use with my domain provider to route domain to my server. As I've been told: You need to configure the custom DNS server in your VPS, to setup the custom nameservers. Please refer the following article that would help: http://www.linuxhomenetworking.com/wiki/index.php/Quick_HOWTO_:_Ch18_:_Configuring_DNS Once you configure the nameserver records, please update the domain registrar panel with the custom nameserver details. I tried to follow this guide but it seems to be a bit outdated, and I am complete newb with non-windows systems. I also scanned the google for other articles which could help me with this problem but, alas, nothing I found was of any value for someone who doesn't know this stuff better than his own pockets. I realize this is quite a complex thing to do, but maybe there is some way to automate it? Or a better solution, like a paid service which would act as my nameservers (this one would be interesting), or even hoped to find some company which "rents" people to do stuff like that. Blah, any help will be appreciated, I am at a complete loss here. I can follow some of these steps, but then I soon find that half of the files which are mentioned in the article are somehow not existing anywhere on the server which confuses me, and once we get to the point of creating Zone I can't really decipher all the things written there :/. As per title, my system is Debian 5.0.

  Read the article

• [deb-5.0] Setup DNS on my server so I can put my IPs in as nameservers of my domain provider

  - by Maurycy Zarzycki

  Basically, my unmanaged VPS provider doesn't supply me with nameserver which I can use with my domain provider to route domain to my server. As I've been told: You need to configure the custom DNS server in your VPS, to setup the custom nameservers. Please refer the following article that would help: http://www.linuxhomenetworking.com/wiki/index.php/Quick_HOWTO_:_Ch18_:_Configuring_DNS Once you configure the nameserver records, please update the domain registrar panel with the custom nameserver details. I tried to follow this guide but it seems to be a bit outdated, and I am complete newb with non-windows systems. I also scanned the google for other articles which could help me with this problem but, alas, nothing I found was of any value for someone who doesn't know this stuff better than his own pockets. I realize this is quite a complex thing to do, but maybe there is some way to automate it? Or a better solution, like a paid service which would act as my nameservers (this one would be interesting), or even hoped to find some company which "rents" people to do stuff like that. Blah, any help will be appreciated, I am at a complete loss here. I can follow some of these steps, but then I soon find that half of the files which are mentioned in the article are somehow not existing anywhere on the server which confuses me, and once we get to the point of creating Zone I can't really decipher all the things written there :/. As per title, my system is Debian 5.0.

  Read the article

• error initializing multiple configuration files

  - by lurscher

  Hi, during initialization startup on tomcat, the configurations are: 1) a webapp/WEB-INF/web.xml that imports yummy-servlet.xml in contextConfigLocation (although i'm aware that is not required since the servlet-name is yummy it will try to load yummy-servlet.xml by default) 2) a webapp/WEB-INF/yummy-servlet.xml that imports a spring/applicationContext-hibernate.xml file 3) a webapp/WEB-INF/spring/applicationContext-hibernate.xml that imports a applicationContext-dataSource.xml file 4) a webapp/WEB-INF/spring/applicationContext-dataSource.xml i'm getting errors about Failed to import bean definitions from relative location, but the stack trace is not very explicit about exactly what is the problem, i've been looking at these since yesterday and i really don't see any problem on the files my web.xml: <?xml version="1.0" encoding="UTF-8"?> <web-app xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns="http://java.sun.com/xml/ns/javaee" xmlns:web="http://java.sun.com/xml/ns/javaee/web-app_2_5.xsd" xsi:schemaLocation="http://java.sun.com/xml/ns/javaee http://java.sun.com/xml/ns/javaee/web-app_2_5.xsd" id="WebApp_ID" version="2.5"> <display-name>hello-spring3-RC1</display-name> <context-param> <param-name>contextConfigLocation</param-name> <param-value>/WEB-INF/yummy-servlet.xml</param-value> </context-param> <!-- <context-param> <param-name>contextConfigLocation</param-name> <param-value>/WEB-INF/spring/applicationContext-hibernate.xml</param-value> </context-param> --> <!-- Location of the Log4J config file, for initialization and refresh checks. Applied by Log4jConfigListener. --> <context-param> <param-name>log4jConfigLocation</param-name> <param-value>classpath:log4j.properties</param-value> </context-param> <listener> <listener-class>org.springframework.web.context.ContextLoaderListener</listener-class> </listener> <servlet> <servlet-name>yummy</servlet-name> <servlet-class>org.springframework.web.servlet.DispatcherServlet</servlet-class> <load-on-startup>1</load-on-startup> </servlet> <servlet-mapping> <servlet-name>yummy</servlet-name> <url-pattern>*.html</url-pattern> </servlet-mapping> <welcome-file-list> <welcome-file>index.html</welcome-file> </welcome-file-list> </web-app> my yummy-servlet.xml: <?xml version="1.0" encoding="UTF-8"?> <beans xmlns="http://www.springframework.org/schema/beans" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:p="http://www.springframework.org/schema/p" xmlns:context="http://www.springframework.org/schema/context" xsi:schemaLocation="http://www.springframework.org/schema/beans http://www.springframework.org/schema/beans/spring-beans-3.0.xsd http://www.springframework.org/schema/context http://www.springframework.org/schema/context/spring-context-3.0.xsd"> <import resource="spring/applicationContext-hibernate.xml"/> <context:component-scan base-package="com.mine.web.controllers"/> <bean id="jspViewResolver" class="org.springframework.web.servlet.view.InternalResourceViewResolver"> <property name="viewClass" value="org.springframework.web.servlet.view.JstlView"/> <property name="prefix" value="/WEB-INF/jsp/"/> <property name="suffix" value=".jsp"/> </bean> </beans> my applicationContext-hibernate.xml: <?xml version="1.0" encoding="UTF-8"?> <beans xmlns="http://www.springframework.org/schema/beans" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:p="http://www.springframework.org/schema/p" xmlns:context="http://www.springframework.org/schema/context" xmlns:tx="http://www.springframework.org/schema/tx" xsi:schemaLocation=" http://www.springframework.org/schema/beans http://www.springframework.org/schema/beans/spring-beans.xsd http://www.springframework.org/schema/context http://www.springframework.org/schema/context/spring-context.xsd http://www.springframework.org/schema/tx http://www.springframework.org/schema/tx/spring-tx.xsd"> <!-- import the dataSource definition --> <import resource="applicationContext-dataSource.xml"/> <!-- Configurer that replaces ${...} placeholders with values from a properties file --> <!-- (in this case, Hibernate-related settings for the sessionFactory definition below) --> <context:property-placeholder location="classpath:jdbc.properties"/> <context:property-placeholder location="classpath:hibernate.properties"/> <!-- Hibernate SessionFactory --> <bean id="sessionFactory" class="org.springframework.orm.hibernate3.LocalSessionFactoryBean" p:dataSource-ref="dataSource" p:mappingResources="hello.hbm.xml"> <property name="hibernateProperties"> <props> <prop key="hibernate.dialect">${hibernate.dialect}</prop> <prop key="hibernate.show_sql">${hibernate.show_sql}</prop> <prop key="hibernate.generate_statistics">${hibernate.generate_statistics}</prop> </props> </property> <property name="eventListeners"> <map> <entry key="merge"> <bean class="org.springframework.orm.hibernate3.support.IdTransferringMergeEventListener"/> </entry> </map> </property> </bean> <bean id="hibernateTemplate" class="org.springframework.orm.hibernate3.HibernateTemplate"> <property name="sessionFactory" ref="sessionFactory" /> </bean> <!-- Transaction manager for a single Hibernate SessionFactory (alternative to JTA) --> <bean id="transactionManager" class="org.springframework.orm.hibernate3.HibernateTransactionManager" p:sessionFactory-ref="sessionFactory"/> <!-- ========================= BUSINESS OBJECT DEFINITIONS ========================= --> <!-- Activates various annotations to be detected in bean classes: Spring's @Required and @Autowired, as well as JSR 250's @Resource. --> <context:annotation-config/> <!-- Instruct Spring to perform declarative transaction management automatically on annotated classes. --> <tx:annotation-driven transaction-manager="transactionManager"/> <bean id="EntityManager" class="com.mine.persistence.hibernate.HibernateHelloWorldDao"/> </beans> and my applicationContext-dataSource.xml: <?xml version="1.0" encoding="UTF-8"?> <beans xmlns="http://www.springframework.org/schema/beans" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:p="http://www.springframework.org/schema/p" xmlns:context="http://www.springframework.org/schema/context" xmlns:jdbc="http://www.springframework.org/schema/jdbc" xsi:schemaLocation="http://www.springframework.org/schema/beans http://www.springframework.org/schema/beans/spring-beans.xsd http://www.springframework.org/schema/context http://www.springframework.org/schema/context/spring-context.xsd http://www.springframework.org/schema/jdbc http://www.springframework.org/schema/jdbc/spring-jdbc.xsd"> <!-- Configurer that replaces ${...} placeholders with values from a properties file --> <!-- (in this case, JDBC-related settings for the dataSource definition below) --> <context:property-placeholder location="classpath:jdbc.properties"/> <context:property-placeholder location="classpath:hibernate.properties"/> <!-- data source using apache common dbcp pool manager <bean id="dataSource" class="org.apache.commons.dbcp.BasicDataSource" destroy-method="close" p:driverClassName="${jdbc.driverClassName}" p:url="${jdbc.url}" p:username="${jdbc.username}" p:password="${jdbc.password}"/>--> <!-- c3p0 pool manager data source --> <bean id="dataSource" class="com.mchange.v2.c3p0.ComboPooledDataSource" destroy-method="close"> <property name="driverClass" value="${jdbc.driverClassName}"/> <property name="jdbcUrl" value="${jdbc.url}"/> <property name="user" value="${jdbc.username}"/> <property name="password" value="${jdbc.password}"/> <property name="initialPoolSize" value="${hibernate.c3p0.min_size}"/> <property name="minPoolSize" value="${hibernate.c3p0.min_size}"/> <property name="maxPoolSize" value="${jdbc.maxconn}"/> <property name="idleConnectionTestPeriod" value="150"/> <property name="acquireIncrement" value="1"/> <property name="maxStatements" value="0"/> <property name="numHelperThreads" value="5"/> </bean> </beans> and this is the stack trace: 2010-06-13 12:16:33,526 INFO [org.springframework.web.context.ContextLoader] - < Root WebApplicationContext: initialization started> 2010-06-13 12:16:33,707 INFO [org.springframework.web.context.support.XmlWebAppl icationContext] - <Refreshing Root WebApplicationContext: startup date [Sun Jun 13 12:16:33 GMT-05:00 2010]; root of context hierarchy> 2010-06-13 12:16:34,086 INFO [org.springframework.beans.factory.xml.XmlBeanDefin itionReader] - <Loading XML bean definitions from ServletContext resource [/WEB- INF/yummy-servlet.xml]> 2010-06-13 12:16:34,378 INFO [org.springframework.beans.factory.xml.XmlBeanDefin itionReader] - <Loading XML bean definitions from URL [jndi:/localhost/protoweb/ WEB-INF/spring/applicationContext-hibernate.xml]> 2010-06-13 12:16:34,473 INFO [org.springframework.beans.factory.xml.XmlBeanDefin itionReader] - <Loading XML bean definitions from URL [jndi:/localhost/protoweb/ WEB-INF/spring/applicationContext-dataSource.xml]> 2010-06-13 12:16:35,098 ERROR [org.springframework.web.context.ContextLoader] - <Context initialization failed> org.springframework.beans.factory.parsing.BeanDefinitionParsingException: Configuration problem: Failed to import bean definitions from relative location [spring/applicationContext-hibernate.xml] Offending resource: ServletContext resource [/WEB-INF/yummy-servlet.xml]; nested exception is org.springframework.beans.factory.BeanDefinitionStoreException: Un expected exception parsing XML document from URL [jndi:/localhost/protoweb/WEB-INF/spring/applicationContext-hibernate.xml]; nested exception is java.lang.NoSuchMethodError: org.springframework.beans.MutablePropertyValues.add(Ljava/lang/Str ing;Ljava/lang/Object;)Lorg/springframework/beans/MutablePropertyValues; at org.springframework.beans.factory.parsing.FailFastProblemReporter.err or(FailFastProblemReporter.java:68) at org.springframework.beans.factory.parsing.ReaderContext.error(ReaderC ontext.java:85) at org.springframework.beans.factory.parsing.ReaderContext.error(ReaderC ontext.java:76) at org.springframework.beans.factory.xml.DefaultBeanDefinitionDocumentRe ader.importBeanDefinitionResource(DefaultBeanDefinitionDocumentReader.java:197) at org.springframework.beans.factory.xml.DefaultBeanDefinitionDocumentRe ader.parseDefaultElement(DefaultBeanDefinitionDocumentReader.java:146) at org.springframework.beans.factory.xml.DefaultBeanDefinitionDocumentRe ader.parseBeanDefinitions(DefaultBeanDefinitionDocumentReader.java:131) at org.springframework.beans.factory.xml.DefaultBeanDefinitionDocumentRe ader.registerBeanDefinitions(DefaultBeanDefinitionDocumentReader.java:91) at org.springframework.beans.factory.xml.XmlBeanDefinitionReader.registe rBeanDefinitions(XmlBeanDefinitionReader.java:475) at org.springframework.beans.factory.xml.XmlBeanDefinitionReader.doLoadB eanDefinitions(XmlBeanDefinitionReader.java:372) at org.springframework.beans.factory.xml.XmlBeanDefinitionReader.loadBea nDefinitions(XmlBeanDefinitionReader.java:316) at org.springframework.beans.factory.xml.XmlBeanDefinitionReader.loadBea nDefinitions(XmlBeanDefinitionReader.java:284) at org.springframework.beans.factory.support.AbstractBeanDefinitionReade r.loadBeanDefinitions(AbstractBeanDefinitionReader.java:143) at org.springframework.beans.factory.support.AbstractBeanDefinitionReade r.loadBeanDefinitions(AbstractBeanDefinitionReader.java:178) at org.springframework.beans.factory.support.AbstractBeanDefinitionReade r.loadBeanDefinitions(AbstractBeanDefinitionReader.java:149) at org.springframework.web.context.support.XmlWebApplicationContext.load BeanDefinitions(XmlWebApplicationContext.java:125) at org.springframework.web.context.support.XmlWebApplicationContext.load BeanDefinitions(XmlWebApplicationContext.java:93) at org.springframework.context.support.AbstractRefreshableApplicationCon text.refreshBeanFactory(AbstractRefreshableApplicationContext.java:127) at org.springframework.context.support.AbstractApplicationContext.obtain FreshBeanFactory(AbstractApplicationContext.java:429) at org.springframework.context.support.AbstractApplicationContext.refres h(AbstractApplicationContext.java:356) at org.springframework.web.context.ContextLoader.createWebApplicationCon text(ContextLoader.java:270) at org.springframework.web.context.ContextLoader.initWebApplicationConte xt(ContextLoader.java:197) at org.springframework.web.context.ContextLoaderListener.contextInitiali zed(ContextLoaderListener.java:47) at org.apache.catalina.core.StandardContext.listenerStart(StandardContex t.java:3972) at org.apache.catalina.core.StandardContext.start(StandardContext.java:4 467) at org.apache.catalina.core.ContainerBase.addChildInternal(ContainerBase .java:791) at org.apache.catalina.core.ContainerBase.addChild(ContainerBase.java:77 1) at org.apache.catalina.core.StandardHost.addChild(StandardHost.java:546) at org.apache.catalina.startup.HostConfig.deployWAR(HostConfig.java:905) at org.apache.catalina.startup.HostConfig.deployWARs(HostConfig.java:740 ) at org.apache.catalina.startup.HostConfig.deployApps(HostConfig.java:500 ) at org.apache.catalina.startup.HostConfig.start(HostConfig.java:1277) at org.apache.catalina.startup.HostConfig.lifecycleEvent(HostConfig.java :321) at org.apache.catalina.util.LifecycleSupport.fireLifecycleEvent(Lifecycl eSupport.java:119) at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1053) at org.apache.catalina.core.StandardHost.start(StandardHost.java:785) at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1045) at org.apache.catalina.core.StandardEngine.start(StandardEngine.java:443 ) at org.apache.catalina.core.StandardService.start(StandardService.java:5 19) at org.apache.catalina.core.StandardServer.start(StandardServer.java:710 ) at org.apache.catalina.startup.Catalina.start(Catalina.java:581) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl. java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAcces sorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:597) at org.apache.catalina.startup.Bootstrap.start(Bootstrap.java:289) at org.apache.catalina.startup.Bootstrap.main(Bootstrap.java:414) Caused by: org.springframework.beans.factory.BeanDefinitionStoreException: Unexp ected exception parsing XML document from URL [jndi:/localhost/protoweb/WEB-INF/ spring/applicationContext-hibernate.xml]; nested exception is java.lang.NoSuchMe thodError: org.springframework.beans.MutablePropertyValues.add(Ljava/lang/String ;Ljava/lang/Object;)Lorg/springframework/beans/MutablePropertyValues; at org.springframework.beans.factory.xml.XmlBeanDefinitionReader.doLoadB eanDefinitions(XmlBeanDefinitionReader.java:394) at org.springframework.beans.factory.xml.XmlBeanDefinitionReader.loadBea nDefinitions(XmlBeanDefinitionReader.java:316) at org.springframework.beans.factory.xml.XmlBeanDefinitionReader.loadBea nDefinitions(XmlBeanDefinitionReader.java:284) at org.springframework.beans.factory.support.AbstractBeanDefinitionReade r.loadBeanDefinitions(AbstractBeanDefinitionReader.java:143) at org.springframework.beans.factory.support.AbstractBeanDefinitionReade r.loadBeanDefinitions(AbstractBeanDefinitionReader.java:178) at org.springframework.beans.factory.xml.DefaultBeanDefinitionDocumentRe ader.importBeanDefinitionResource(DefaultBeanDefinitionDocumentReader.java:187) ... 42 more Caused by: java.lang.NoSuchMethodError: org.springframework.beans.MutablePropert yValues.add(Ljava/lang/String;Ljava/lang/Object;)Lorg/springframework/beans/Muta blePropertyValues; at org.springframework.transaction.config.AnnotationDrivenBeanDefinition Parser.registerTransactionManager(AnnotationDrivenBeanDefinitionParser.java:95) at org.springframework.transaction.config.AnnotationDrivenBeanDefinition Parser.access$0(AnnotationDrivenBeanDefinitionParser.java:94) at org.springframework.transaction.config.AnnotationDrivenBeanDefinition Parser$AopAutoProxyConfigurer.configureAutoProxyCreator(AnnotationDrivenBeanDefi nitionParser.java:121) at org.springframework.transaction.config.AnnotationDrivenBeanDefinition Parser.parse(AnnotationDrivenBeanDefinitionParser.java:79) at org.springframework.beans.factory.xml.NamespaceHandlerSupport.parse(N amespaceHandlerSupport.java:72) at org.springframework.beans.factory.xml.BeanDefinitionParserDelegate.pa rseCustomElement(BeanDefinitionParserDelegate.java:1327) at org.springframework.beans.factory.xml.BeanDefinitionParserDelegate.pa rseCustomElement(BeanDefinitionParserDelegate.java:1317) at org.springframework.beans.factory.xml.DefaultBeanDefinitionDocumentRe ader.parseBeanDefinitions(DefaultBeanDefinitionDocumentReader.java:134) at org.springframework.beans.factory.xml.DefaultBeanDefinitionDocumentRe ader.registerBeanDefinitions(DefaultBeanDefinitionDocumentReader.java:91) at org.springframework.beans.factory.xml.XmlBeanDefinitionReader.registe rBeanDefinitions(XmlBeanDefinitionReader.java:475) at org.springframework.beans.factory.xml.XmlBeanDefinitionReader.doLoadB eanDefinitions(XmlBeanDefinitionReader.java:372) ... 47 more 06/13/2010 12:16:35 PM org.apache.catalina.core.StandardContext start SEVERE: Error listenerStart

  Read the article

• CascadingDropDown jQuery Plugin for ASP.NET MVC

  - by rajbk

  CascadingDropDown is a jQuery plugin that can be used by a select list to get automatic population using AJAX. A sample ASP.NET MVC project is attached at the bottom of this post.   Usage The code below shows two select lists : <select id="customerID" name="customerID"> <option value="ALFKI">Maria Anders</option> <option value="ANATR">Ana Trujillo</option> <option value="ANTON">Antonio Moreno</option> </select>   <select id="orderID" name="orderID"> </select> When a customer is selected in the first select list, the second list will auto populate itself with the following code: $("#orderID").CascadingDropDown("#customerID", '/Sales/AsyncOrders'); Internally, an AJAX post is made to ‘/Sales/AsyncOrders’ with the post body containing  customerID=[selectedCustomerID]. This executes the action AsyncOrders on the SalesController with signature AsyncOrders(string customerID).  The AsyncOrders method returns JSON which is then used to populate the select list. The JSON format expected is shown below : [{ "Text": "John", "Value": "10326" }, { "Text": "Jane", "Value": "10801" }] Details $(targetID).CascadingDropDown(sourceID, url, settings) targetID The ID of the select list that will auto populate.  sourceID The ID of the select list, which, on change, causes the targetID to auto populate. url The url to post to Options promptText Text for the first item in the select list Default : -- Select -- loadingText Optional text to display in the select list while it is being loaded. Default : Loading.. errorText Optional text to display if an error occurs while populating the list Default: Error loading data. postData Data you want posted to the url in place of the default Example : { postData : { customerID : $(‘#custID’), orderID : $(‘#orderID’) }} will cause customerID=ALFKI&orderID=2343 to be sent as the POST body. Default: A text string obtained by calling serialize on the sourceID onLoading (event) Raised before the list is populated. onLoaded (event) Raised after the list is populated, The code below shows how to “animate” the  select list after load. Example using custom options: $("#orderID").CascadingDropDown("#customerID", '/Sales/AsyncOrders', { promptText: '-- Pick an Order--', onLoading: function () { $(this).css("background-color", "#ff3"); }, onLoaded: function () { $(this).animate({ backgroundColor: '#ffffff' }, 300); } }); To return JSON from our action method, we use the Json ActionResult passing in an IEnumerable<SelectListItem>. public ActionResult AsyncOrders(string customerID) { var orders = repository.GetOrders(customerID).ToList().Select(a => new SelectListItem() { Text = a.OrderDate.HasValue ? a.OrderDate.Value.ToString("MM/dd/yyyy") : "[ No Date ]", Value = a.OrderID.ToString(), }); return Json(orders); } Sample Project using VS 2010 RTM NorthwindCascading.zip

  Read the article

• Convert YouTube Videos to MP3 with YouTube Downloader

  - by DigitalGeekery

  Are you looking for a way to take the music videos you watch on YouTube and convert them to MP3? Today we take a look at an easy way to convert those YouTube videos to MP3 for free with YouTube Downloader. The YouTube Downloader functions in two steps. First, it downloads the video from YouTube in MP4 format, and then allows you to convert that MP4 file to MP3. Note: It also supports conversion conversion to some other formats such as AVI video, MOV, iPhone, PSP, 3GP, and WMV.   Installation and usage Download and Install YouTube Downloader. (See download link below) Open the YouTube Downloader by clicking on the desktop icon. Find a YouTube video you’d like to convert to MP3 and copy the URL. Paste the URL into the “Enter video URL” text box in YouTube Downloader. When you hover your mouse over the text box, the text box will auto-fill with the URL from your clipboard. Select the “Download video from YouTube” radio button and click “Ok.” Choose a folder to location to download your YouTube video and click “Save.” The video is downloaded in MP4 format. Now wait while the video is downloaded to your hard drive.   Select the “Convert video (previously downloaded) from file” radio button. Click the (…) button to the right of the “Select video file” text box to browse for and select the MP4 file you just downloaded. Then select “MPEG Audio Layer (MP3) from the “Convert to” drop down list. Select “OK” to begin the conversion. Choose the conversion quality by moving the slider to the right or left. The options are: Low (96kbps bite rate), Medium (128kbps bit rate), Optimal (192kbps bit rate), and High 256kbps bit rate). Here you can select the output volume as well. Click “OK” when finished. If there is a portion of the beginning or end of the video that you wish to cut out of the MP3, select the “Cut video” check box and choose a Start and End time. Click “OK” when finished. Note: The start and end time represent the audio portion of the MP3 you wish to keep. All portions before and after these times will be cut.   The conversion process will begin and should only take a few moments. Times will vary depending on the size of the video you’re converting. Conversion was successful! The MP3 you converted will be in the same directory you downloaded the video to. Now you’re ready to listen to your MP3 or import it to your Zune, iTunes, or music library. You may also want to delete the MP4 files after the conversion if you will no longer need them. Conclusion YouTube Downloader features a very simple interface that’s user friendly and easy to use. It comes in handy when you watch videos that look horrible, but the sound quality is good. Or if you just need to hear the audio of something posted and don’t need the video. It also allows you to download from Google Video, MySpace, and others. Download YouTube Downloader Similar Articles Productive Geek Tips Download YouTube Videos with Cheetah YouTube DownloaderWatch YouTube Videos in Cinema Style in FirefoxStop YouTube Videos from Automatically Playing in FirefoxRemove Unsuitable Comments from YouTubeImprove YouTube Video Viewing in Google Chrome TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional Windows Media Player 12: Tweak Video & Sound with Playback Enhancements Own a cell phone, or does a cell phone own you? Make your Joomla & Drupal Sites Mobile with OSMOBI Integrate Twitter and Delicious and Make Life Easier Design Your Web Pages Using the Golden Ratio Worldwide Growth of the Internet

  Read the article

• How To Apply Online For New Passport Or Renewal Of Your Passport [Indian Websites]

  - by Gopinath

  Are you bored wasting time and energy in standing lengthy queues at Passport offices in India to apply a new passport or renew it? Indian Government Passport Office has an online portal that lets you apply for new passport or renew your expiring passport by filling details online. By filling the details online you can complete half of the required formalities sitting at home and the rest of tasks like submitting required proofs, paying money etc at your regional passport office. Saves lot of time. Advantages of Applying For Passport Online Ask anyone who already obtained a passport by visiting the passport office, they will narrate stories of spending long time in queues. In certain office, the length of queues may require you to stand 3 to 4 hours. And sometimes by the time your turn comes, the officers may break for lunch, coffee or the day if your time is very bad. The main advantage of applying for passport using this online portal is – we can skip the process of standing in long queues to obtain tokens for submitting tokens and also we get a pre booked appointment with passport issuing officer for submitting the proofs and paying fees. When you submit the application online, an appointment will be booked automatically for submitting the required documents and fees so that  you can just walk-in to passport office 15 minutes ahead of your appointment. List Of Passport Offices Accepting Online Application Forms I know that you are excited and all set to apply online, but hold on. The online Passport application submission is supported in 37 regional passport offices across India as I write this post. If you are residing in any of these cities, then only you can apply online – Ahemdabad,  Amritsar, Bareilly, Bhopal, Bhubneswar, Chennai, Cochin, Coimbatore, Dehradun, Delhi, Ghaziabad, Guwahati, Hyderabad, Jaipur, Jalandhar, Jammu, Kolkata, Kozhikode, Lucknow, Madurai, Malappuram, Mumbai, Nagpur, Panaji, Patna, Pune, Raipur, Ranchi, Shimla, Srinagar, Surat, Thane, Trichy, Trivandrum, Visakhapatnam. Others should approach the passport office directly. Government is trying to expand this to other locations, so please check if place accepting online registration by visiting registration page(link given below). Types Of Applications Accepted Online The online system accepts following types of passport applications Fresh Passport / Renewal New Passport in lieu of Damaged/Lost Passport Passport for Children up to 15 Years of Age Re-issue of Passport / Additional Booklet Indian Govt. Passport Office Website And Online Application URL To apply for passport online visit the url https://passport.gov.in/pms/Information.jsp using Internet Explorer browser. This site may not work on your Firefox, Chrome or other browsers as the site request users to use Internet Explorer. Here are few other links that will help you get more details on passport application Govt. Of India Passport Office Website Passport Application Fee Structure Information Passport Application Filling Guidelines Passport Application Check List URL For NRIs To Apply Online If you are an NRI then the above links and the list of supported Passport offices are not for you. NRIs should use the URL http://passport.gov.in/nri/OnlineRegistration.jsp for applying passport related services online. For more details you can visit special NRI section on Passport website. CC Image credit: LucasTheExperience This article titled,How To Apply Online For New Passport Or Renewal Of Your Passport [Indian Websites], was originally published at Tech Dreams. Grab our rss feed or fan us on Facebook to get updates from us.

  Read the article

• JMX Based Monitoring - Part Three - Web App Server Monitoring

  - by Anthony Shorten

  In the last blog entry I showed a technique for integrating a JMX console with Oracle WebLogic which is a standard feature of Oracle WebLogic 11g. Customers on other Web Application servers and other versions of Oracle WebLogic can refer to the documentation provided with the server to do a similar thing. In this blog entry I am going to discuss a new feature that is only present in Oracle Utilities Application Framework 4 and above that allows JMX to be used for management and monitoring the Oracle Utilities Web Applications. In this case JMX can be used to perform monitoring as well as provide the management of the cache. In Oracle Utilities Application Framework you can enable Web Application Server JMX monitoring that is unique to the framework by specifying a JMX port number in RMI Port number for JMX Web setting and initial credentials in the JMX Enablement System User ID and JMX Enablement System Password configuration options. These options are available using the configureEnv[.sh] -a utility. Once this is information is supplied a number of configuration files are built (by the initialSetup[.sh] utility) to configure the facility: spl.properties - contains the JMX URL, the security configuration and the mbeans that are enabled. For example, on my demonstration machine: spl.runtime.management.rmi.port=6740 spl.runtime.management.connector.url.default=service:jmx:rmi:///jndi/rmi://localhost:6740/oracle/ouaf/webAppConnector jmx.remote.x.password.file=scripts/ouaf.jmx.password.file jmx.remote.x.access.file=scripts/ouaf.jmx.access.file ouaf.jmx.com.splwg.base.support.management.mbean.JVMInfo=enabled ouaf.jmx.com.splwg.base.web.mbeans.FlushBean=enabled ouaf.jmx.* files - contain the userid and password. The default setup uses the JMX default security configuration. You can use additional security features by altering the spl.properties file manually or using a custom template. For more security options see the JMX Site. Once it has been configured and the changes reflected in the product using the initialSetup[.sh] utility the JMX facility can be used. For illustrative purposes, I will use jconsole but any JSR160 complaint browser or client can be used (with the appropriate configuration). Once you start jconsole (ensure that splenviron[.sh] is executed prior to execution to set the environment variables or for remote connection, ensure java is in your path and jconsole.jar in your classpath) you specify the URL in the spl.management.connnector.url.default entry and the credentials you specified in the jmx.remote.x.* files. Remember these are encrypted by default so if you try and view the file you may be able to decipher it visually. For example: There are three Mbeans available to you: flushBean - This is a JMX replacement for the jsp versions of the flush utilities provided in previous releases of the Oracle Utilities Application Framework. You can manage the cache using the provided operations from JMX. The jsp versions of the flush utilities are still provided, for backward compatibility, but now are authorization controlled. JVMInfo - This is a JMX replacement for the jsp version of the JVMInfo screen used by support to get a handle on JVM information. This information is environmental not operational and is used for support purposes. The jsp versions of the JVMInfo utilities are still provided, for backward compatibility, but now is also authorization controlled. JVMSystem - This is an implementation of the Java system MXBeans for use in monitoring. We provide our own implementation of the base Mbeans to save on creating another JMX configuration for internal monitoring and to provide a consistent interface across platforms for the MXBeans. This Mbean is disabled by default and can be enabled using the enableJVMSystemBeans operation. This Mbean allows for the monitoring of the ClassLoading, Memory, OperatingSystem, Runtime and the Thread MX beans. Refer to the Server Administration Guides provided with your product and the Technical Best Practices Whitepaper for information about individual statistics. The Web Application Server JMX monitoring allows greater visibility for monitoring and management of the Oracle Utilities Application Framework application from jconsole or any JSR160 compliant JMX browser or JMX console.

  Read the article

• jQuery Templates on Microsoft Ajax CDN

  - by Stephen Walther

  The beta version of the jQuery Templates plugin is now hosted on the Microsoft Ajax CDN. You can start using the jQuery Templates plugin in your application by referencing both jQuery 1.4.2 and jQuery Templates from the CDN. Here are the two script tags that you will want to use when developing an application: <script type="text/javascript" src=”http://ajax.microsoft.com/ajax/jquery/jquery-1.4.2.js”></script> <script type="text/javascript" src=”http://ajax.microsoft.com/ajax/jquery.templates/beta1/jquery.tmpl.js”></script> In addition, minified versions of both files are available from the CDN: <script type="text/javascript" src="http://ajax.microsoft.com/ajax/jquery/jquery-1.4.2.min.js"></script> <script type="text/javascript" src="http://ajax.microsoft.com/ajax/jquery.templates/beta1/jquery.tmpl.min.js"></script> Here’s a full code sample of using jQuery Templates from the CDN to display pictures of cats from Flickr: <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"> <html xmlns="http://www.w3.org/1999/xhtml"> <head> <title>Cats</title> <style type="text/css"> html { background-color:Orange; } #catBox div { width:250px; height:250px; border:solid 1px black; background-color:White; margin:5px; padding:5px; float:left; } #catBox img { width:200px; height: 200px; } </style> </head> <body> <h1>Cat Photos!</h1> <div id="catBox"></div> <script type="text/javascript" src="http://ajax.microsoft.com/ajax/jquery/jquery-1.4.2.min.js"></script> <script type="text/javascript" src="http://ajax.microsoft.com/ajax/jquery.templates/beta1/jquery.tmpl.min.js"></script> <script id="catTemplate" type="text/x-jquery-tmpl"> <div> <b>${title}</b> <br /> <img src="${media.m}" /> </div> </script> <script type="text/javascript"> var url = "http://api.flickr.com/services/feeds/groups_pool.gne?id=44124373027@N01&lang=en-us&format=json&jsoncallback=?"; // Grab some flickr images of cats $.getJSON(url, function (data) { // Format the data using the catTemplate template $("#catTemplate").tmpl(data.items).appendTo("#catBox"); }); </script> </body> </html> This page displays a list of cats retrieved from Flickr: Notice that the cat pictures are retrieved and rendered with just a few lines of code: var url = "http://api.flickr.com/services/feeds/groups_pool.gne?id=44124373027@N01&lang=en-us&format=json&jsoncallback=?"; // Grab some flickr images of cats $.getJSON(url, function (data) { // Format the data using the catTemplate template $("#catTemplate").tmpl(data.items).appendTo("#catBox"); }); The final line of code, the one that calls the tmpl() method, uses the Templates plugin to render the cat photos in a template named catTemplate. The catTemplate template is contained within a SCRIPT element with type="text/x-jquery-tmpl". The jQuery Templates plugin is an “official” jQuery plugin which will be included in jQuery 1.5 (the next major release of jQuery). You can read the full documentation for the plugin at the jQuery website: http://api.jquery.com/category/plugins/templates/ The jQuery Templates plugin is still beta so we would really appreciate your feedback on the plugin. Let us know if you use the Templates plugin in your website.

  Read the article

• Calling XAI Inbound Services from Oracle BI Publisher

  - by ACShorten

  Note: This technique requires Oracle BI Publisher 1.1.3.4.1 which supports Service Complex Types. Web Services require credentials for authentication. Note: The deafults for the product installation are used in this article. If your site uses alternative values then substitute those alternatives where applicable. Note: Examples shown in this article are examples for illustrative purposes only. When building a report in Oracle BI Publisher it may be necessary to call an XAI Inbound Service to get information via the object rather than directly calling the database tables for various reasons: The CLOB fields used in the Object are accessible for a report. Note: CLOB fields cannot be used as criteria in the current release. Objects can take advantage of algorithms to format or calculate additional data that is not stored in the database directly. For example, Information format strings can automatically generated by the object which gives consistent information between a report and the online screens. To use this facility the following process must be performed: Ensure that the product group, cisusers by default, is enabled for the SPLServiceBean in the console. This allows BI Publisher access to call Web Services directly. To ensure this follow the instructions below: Logon to the Oracle WebLogic server console using an appropriate administrator account. By default the user system or weblogic is provided for this purpose. Navigate to the Security Realms section and select your configured realm. This is set to myrealm by default. In the Roles and Policies section, expand the SPLService section of the Deployments option to reveal the SPLServiceBean roles. If there is no role associated with the SPLServiceBean, create a new EJB role and specify the cisusers role, by default. For example:   Add a Role Condition to the role just created, with a Predicate List of Group and specify cisusers as the Group Argument Name. For example: Save all your changes. The XAI Inbound Services to be used by BI Publisher must be defined prior to using the interface. Refer to the XAI Best Practices (Doc Id: 942074.1) from My Oracle Support or via the online help for more information about this process. Inside BI Publisher create your report, according to the BI Publisher documentation. When specifying the dataset, under the Data Model Report option, specify the following to use an XAI Inbound Service as a data source: Parameter Comment Type Web Service Complex Type true Username Any valid user name within the product. This user MUST have security access to the objects referenced in the XAI Inbound Service Password Authentication password for Username Timeout Timeout, in seconds, set for the Web Service call. For example 60 seconds. WSDL URL Use the WSDL URL on the XAI Inbound Service definition as your WSDL URL. It will be in the following format by default:http://<host>:<port>/<server>/XAIApp/xaiserver/<service>?WSDLwhere: <host> - Host Name of Web Application Server <port> - Port allocated to Web Application Server for product access <server> - Server context for server <service> - XAI Inbound Service Name Note: For customers using secure transmission should substitute https instead of http and use the HTTPS port allocated to the product at installation time. Web Service Select the name of the service that shows in the drop-down menu. If no service name shows up, it means that Publisher could not establish a connection with the server or WSDL name provided in the above URL in order to get the service name. See BI Publisher server log for more information. Method Select the name of the Method that shows in the drop-down menu. A method name should show in the Method drop-down menu once the Web Service name is selected. For example: Additionally, filters can be used from the Web Service that can be generated, required or optional, from the WSDL in the Parameter List. For example:

  Read the article

• MvcExtensions - PerRequestTask

  - by kazimanzurrashid

  In the previous post, we have seen the BootstrapperTask which executes when the application starts and ends, similarly there are times when we need to execute some custom logic when a request starts and ends. Usually, for this kind of scenario we create HttpModule and hook the begin and end request events. There is nothing wrong with this approach, except HttpModules are not at all IoC containers friendly, also defining the HttpModule execution order is bit cumbersome, you either have to modify the machine.config or clear the HttpModules and add it again in web.config. Instead, you can use the PerRequestTask which is very much container friendly as well as supports execution orders. Lets few examples where it can be used. Remove www Subdomain Lets say we want to remove the www subdomain, so that if anybody types http://www.mydomain.com it will automatically redirects to http://mydomain.com. public class RemoveWwwSubdomain : PerRequestTask { public RemoveWww() { Order = DefaultOrder - 1; } protected override TaskContinuation ExecuteCore(PerRequestExecutionContext executionContext) { const string Prefix = "http://www."; Check.Argument.IsNotNull(executionContext, "executionContext"); HttpContextBase httpContext = executionContext.HttpContext; string url = httpContext.Request.Url.ToString(); bool startsWith3W = url.StartsWith(Prefix, StringComparison.OrdinalIgnoreCase); bool shouldContinue = true; if (startsWith3W) { string newUrl = "http://" + url.Substring(Prefix.Length); HttpResponseBase response = httpContext.Response; response.StatusCode = (int)HttpStatusCode.MovedPermanently; response.Status = "301 Moved Permanently"; response.RedirectLocation = newUrl; response.SuppressContent = true; shouldContinue = false; } return shouldContinue ? TaskContinuation.Continue : TaskContinuation.Break; } } As you can see, first, we are setting the order so that we do not have to execute the remaining tasks of the chain when we are redirecting, next in the ExecuteCore, we checking the whether www is present, if present we are sending a permanently moved http status code and breaking the task execution chain otherwise we are continuing with the chain. Blocking IP Address Lets take another scenario, your application is hosted in a shared hosting environment where you do not have the permission to change the IIS setting and you want to block certain IP addresses from visiting your application. Lets say, you maintain a list of IP address in database/xml files which you want to block, you have a IBannedIPAddressRepository service which is used to match banned IP Address. public class BlockRestrictedIPAddress : PerRequestTask { protected override TaskContinuation ExecuteCore(PerRequestExecutionContext executionContext) { bool shouldContinue = true; HttpContextBase httpContext = executionContext.HttpContext; if (!httpContext.Request.IsLocal) { string ipAddress = httpContext.Request.UserHostAddress; HttpResponseBase httpResponse = httpContext.Response; if (executionContext.ServiceLocator.GetInstance<IBannedIPAddressRepository>().IsMatching(ipAddress)) { httpResponse.StatusCode = (int)HttpStatusCode.Forbidden; httpResponse.StatusDescription = "IPAddress blocked."; shouldContinue = false; } } return shouldContinue ? TaskContinuation.Continue : TaskContinuation.Break; } } Managing Database Session Now, let see how it can be used to manage NHibernate session, assuming that ISessionFactory of NHibernate is already registered in our container. public class ManageNHibernateSession : PerRequestTask { private ISession session; protected override TaskContinuation ExecuteCore(PerRequestExecutionContext executionContext) { ISessionFactory factory = executionContext.ServiceLocator.GetInstance<ISessionFactory>(); session = factory.OpenSession(); return TaskContinuation.Continue; } protected override void DisposeCore() { session.Close(); session.Dispose(); } } As you can see PerRequestTask can be used to execute small and precise tasks in the begin/end request, certainly if you want to execute other than begin/end request there is no other alternate of HttpModule. That’s it for today, in the next post, we will discuss about the Action Filters, so stay tuned.

  Read the article

• Running Multiple WebLogic and OSB Domains

  - by jeff.x.davies

  I have any number of OSB domain created on my machine at any point in time. For example, I have different domains for different version of Oracle Service Bus and Oracle SOA Suite. I also have different domains for different purposes. I have a demo domain and another domain for the projects in my blog. Starting with OSB 11g and the Apache Derby server, there is a small "gotcha" if you want to create multiple domains on a devevelopment machine. When you create a new domain for OSB 11g it will use the same database info for all databases and this will cause an error when starting the admin server of the second domain (the first domain doesn't have to be running for this error to occur). Here is an example of the error message in the server console: ####<Mar 8, 2011 2:58:48 PM PST> <Critical> <JTA> <jeff-laptop> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1299625128464> <BEA-110482> <A logging last resource failed during initialization. The server cannot boot unless all configured logging last resources (LLRs) initialize. Failing reason: weblogic.transaction.loggingresource.LoggingResourceException: java.sql.SQLException: JDBC LLR, table verify failed for table 'WL_LLR_ADMINSERVER', row 'JDBC LLR Domain//Server' record had unexpected value 'osb11gR1PS3//AdminServer' expected 'OSBCIM//AdminServer'*** ONLY the original domain and server that creates an LLR table may access it *** The solution is to create a database instance for each of your domains and this is very simple to do. After you create a domain using the Configuration Wizard, locate the wlsbjmsrpDataSource-jdbc.xml file that is found under the DOMAIN_HOME/config/jdbc directory. Near the top of the file you will see the following entry: <url>jdbc:derby://localhost:1527/osbexamples;create=true;ServerName=localhost;databaseName=osbexamples</url> You need to modify this entry with a different and unique database name. The easiest way to do this is to substiture the name of your domain. For example: <url>jdbc:derby://localhost:1527/mydomain;create=true;ServerName=localhost;databaseName=mydomain</url> will create a database named mydomain . Now, when you restart the admin server for the domain, it will create the new database for you. Do this for each domain you create on your development machine and you'll have no troubles. The process is much simpler if you are creating a domain using the Configuration Wizard. Simply name the database when you get to the Configure JDBC Component Schema step of the Configuration Wizard, select the OSB JMS Reporting Provider and set the name in the DBMS/Service field to whatever name you like, as shown in Figure 1 below. Figure 1 – Configuring the JDBC Component Schema That is all there is to it. Now you can create as many domains on your leptop or development machine as you like and not have to worry about them conflicting with each other.

  Read the article

• Page output caching for dynamic web applications

  - by Mike Ellis

  I am currently working on a web application where the user steps (forward or back) through a series of pages with "Next" and "Previous" buttons, entering data until they reach a page with the "Finish" button. Until finished, all data is stored in Session state, then sent to the mainframe database via web services at the end of the process. Some of the pages display data from previous pages in order to collect additional information. These pages can never be cached because they are different for every user. For pages that don't display this dynamic data, they can be cached, but only the first time they load. After that, the data that was previously entered needs to be displayed. This requires Page_Load to fire, which means the page can't be cached at that point. A couple of weeks ago, I knew almost nothing about implementing page caching. Now I still don't know much, but I know a little bit, and here is the solution that I developed with the help of others on my team and a lot of reading and trial-and-error. We have a base page class defined from which all pages inherit. In this class I have defined a method that sets the caching settings programmatically. For pages that can be cached, they call this base page method in their Page_Load event within a if(!IsPostBack) block, which ensures that only the page itself gets cached, not the data on the page. if(!IsPostBack) {     ...     SetCacheSettings();     ... } protected void SetCacheSettings() {     Response.Cache.AddValidationCallback(new HttpCacheValidateHandler(Validate), null);     Response.Cache.SetExpires(DateTime.Now.AddHours(1));     Response.Cache.SetSlidingExpiration(true);     Response.Cache.SetValidUntilExpires(true);     Response.Cache.SetCacheability(HttpCacheability.ServerAndNoCache); } The AddValidationCallback sets up an HttpCacheValidateHandler method called Validate which runs logic when a cached page is requested. The Validate method signature is standard for this method type. public static void Validate(HttpContext context, Object data, ref HttpValidationStatus status) {     string visited = context.Request.QueryString["v"];     if (visited != null && "1".Equals(visited))     {         status = HttpValidationStatus.IgnoreThisRequest; //force a page load     }     else     {         status = HttpValidationStatus.Valid; //load from cache     } } I am using the HttpValidationStatus values IgnoreThisRequest or Valid which forces the Page_Load event method to run or allows the page to load from cache, respectively. Which one is set depends on the value in the querystring. The value in the querystring is set up on each page in the "Next" and "Previous" button click event methods based on whether the page that the button click is taking the user to has any data on it or not. bool hasData = HasPageBeenVisited(url); if (hasData) {     url += VISITED; } Response.Redirect(url); The HasPageBeenVisited method determines whether the destination page has any data on it by checking one of its required data fields. (I won't include it here because it is very system-dependent.) VISITED is a string constant containing "?v=1" and gets appended to the url if the destination page has been visited. The reason this logic is within the "Next" and "Previous" button click event methods is because 1) the Validate method is static which doesn't allow it to access non-static data such as the data fields for a particular page, and 2) at the time at which the Validate method runs, either the data has not yet been deserialized from Session state or is not available (different AppDomain?) because anytime I accessed the Session state information from the Validate method, it was always empty.

  Read the article

• Focus on Social Relationship Management at Oracle OpenWorld

  - by Pat Ma

  v\:* {behavior:url(#default#VML);} o\:* {behavior:url(#default#VML);} w\:* {behavior:url(#default#VML);} .shape {behavior:url(#default#VML);} 0 0 1 422 2408 involver 20 5 2825 14.0 Normal 0 false false false false EN-US JA X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:12.0pt; font-family:Cambria; mso-ascii-font-family:Cambria; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Cambria; mso-hansi-theme-font:minor-latin;} Greetings from Oracle OpenWorld 2012. Today, we’re going to focus on Social Relationship Management at Oracle OpenWorld.?Social networking is touching all businesses today.  Customers are speaking about your brand right now on social media sites. Your employees are speaking to one another on social media sites. In an Oracle survey, 40% of consumers factor in Facebook recommendations when making purchasing decisions. Despite the rise of social networking, 70% of marketers report having little understanding of social media conversations happening around their brand. Oracle has invested in technologies that will help companies leverage social media technologies for their enterprise. Our suite of social products is collectively known as Social Relationship Management. Customers are using Social Relationship Management to get analytics to social media conversations around their brand, manage multiple social media channels while keeping their brand consistent, optimize internal workflows and processes, and create better customer relationships and experiences. In this example, using Social Relationship Management, a high-end national grocery chain is able to see that “Coconut Water” is trending in San Francisco. They are now able to send a $2-off coconut water coupon to shoppers who have checked into their San Francisco locations. This promotion further drives sales of coconut water in San Francisco. In another example, using Social Relationship Management, a technology company creates multiple Facebook pages and runs campaigns on them. These social campaigns are now integrated and tracked as another marketing channel in Oracle Fusion CRM. The technology company can now track and respond to a particular customer as he moves across multiple channels – without having to restart the conversation each time the customer contacts the company. Furthermore, the technology company can see in one interface what marketing channels – including social – is performing best for each promotion. Besides being a Software-as-a-Service solution, social is also a Platform-as-a-Service solution. The benefit here is that customers can extend the functionality of our social applications to suit their particular needs or create their own social application from scratch. During the Social Developer track, developers are learning how to use Java and other industry-standard programming languages to plug in social functionality to enterprise applications. To see how Social Relationship Management can help your business build better relationships and experience with customers, visit us on the web at oracle.com/social. There are a lot more social-oriented sessions left at OpenWorld. To view a schedule of the upcoming social-oriented sessions, go here.

  Read the article

• How to use Oracle AQ with Message-Driven Beans in Weblogic

  - by lukasz.romaszewski(at)oracle.com

  Welcome to the IMC blog! This post shows how to use Oracle AQ as an underlying JMS implementation with MDBs in Weblogic. MDB's can be very useful when you want to integrate your database logic with your Java application. Normally JEE application invokes the code inside the database. But in some cases you want the DB to initiate the asynchronous call and have your Java application do the actual processing. This is also very useful when you want to integrate JEE code with the Oracle Forms application.The post has been based on the following OTN documentation: Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin;} http://download.oracle.com/docs/cd/E14571_01/web.1111/e13738/aq_jms.htm#CJACBCEJDetailed instruction is here:How to connect MDB to Oracle AQ.pdf v\:* {behavior:url(#default#VML);} o\:* {behavior:url(#default#VML);} w\:* {behavior:url(#default#VML);} .shape {behavior:url(#default#VML);} Normal 0 false false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin;} You can also download a sample JDeveloper application here:MDB_AQApplication.zipPlease feel free to ask questions and put comments.Merry Christmas and Happy New Year!

  Read the article

• Data Connection Library in SharePoint Server 2010

  - by Wayne

  What is a Data Connection Library in SharePoint Server 2010? A Data Connection Library in Microsoft SharePoint Server 2010 is a library that can contain two kinds of data connections: an Office Data Connection (ODC) file or a Universal Data Connection (UDC) file. Microsoft InfoPath 2010 uses data connections that comply with the Universal Data Connection (UDC) file schema and typically have either a *.udcx or *.xml file name extension. Data sources described by these data connections are stored on the server and can be used in standard form templates and browser-enabled form templates. How to create a SharePoint Server Data Connection Library? 1. Browse to a SharePoint Server 2010 site on which you have at least Design permissions. If you are on the root site, create a new site before you continue with the next step. 2. On the Site Actions menu, click More Options. 3. On the Create page, click Library under Filter By, and then click Data Connection Library. 4. On the right side of the Create page, type a name for the library, and then click the Create button. 5. Copy the URL of the new data connection library. How to create a new data connection file in InfoPath? 1. Open InfoPath Designer 2010, click Blank Form, and then click Design Form. 2. On the Data tab, click Data Connections, and then click Add. 3. In the Data Connection Wizard, click Create a new connection to, click Receive data, and then click Next. 4. Click the kind of data source that you are connecting to, such as Database, Web service, or SharePoint library or list, and then click Next. 5. Complete the remaining steps in the Data Connection Wizard to configure your data connection, and then click Finish to return to the Data Connections dialog box. 6. In the Data Connections dialog box, click Convert to Connection File. 7. In the Convert Data Connection dialog box, enter the URL of the data connection library that you previously copied (delete "Forms/AllItems.aspx" and anything following it from the URL), enter a name for the data connection file at the end of the URL, and then click OK. It will take a few moments to convert and save the data connection file to the library. 8. Confirm that the data connection was converted successfully by examining the Details section of the Data Connections dialog box while the name of the converted data connection is selected. 9. Browse to the SharePoint data connection library, click the drop-down next to the name of the data connection, click Approve/Reject, click Approved, and then click OK. Take advantage of SharePoint Data Connection Library and other useful features of SharePoint family of products that include, SharePoint Foundation 2010, MOSS 2007 and free SharePoint templates or web parts.

  Read the article

• Introducing Oracle User Productivity Kit (UPK) 12.1 Thursday 26th June 2014 – Oracle, Reading, Berkshire

  - by Kathryn Lustenberger

  Join Oracle UPK Product Management and Product Development In conjunction with Larmer Brown Register Now v\:* {behavior:url(#default#VML);} o\:* {behavior:url(#default#VML);} w\:* {behavior:url(#default#VML);} .shape {behavior:url(#default#VML);} Normal 0 false false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} table.MsoTableGrid {mso-style-name:"Table Grid"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-priority:59; mso-style-unhide:no; border:solid windowtext 1.0pt; mso-border-alt:solid windowtext .5pt; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-border-insideh:.5pt solid windowtext; mso-border-insidev:.5pt solid windowtext; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} UPK Client Event – Introducing v12.1 Thursday 26th June 2014 Oracle Thames Valley Park, Reading, Berkshire Agenda Time Session 10.00am Registration and Coffee 10.30am Introductions and Objectives TWIN TRACK SESSION 10.45am Introduction to UPK (Standard) Version 12.1 Overview and Demonstration for delegates new to UPK Upgrading to UPK (Standard) Version 12.1 Demonstration of the latest release, for delegates with experience of UPK 12.25pm Q&A An opportunity for delegates to raise specific questions about the tool Q&A An opportunity for delegates to raise specific questions about the latest release 12.45pm Lunch 1.30pm Larmer Brown Development Tracker Larmer Brown’s Development Tracker addresses the challenge of ensuring that a Content Development Project will meet agreed deadlines, identifying risks with sufficient notice to take action 1.50pm Case Study How the Development Tracker addressed this client’s requirement to track, monitor and report progress on a large-scale implementation Project 2.10pm Larmer Brown Library Content for UPK This session will showcase some of Larmer Brown’s content library and consider how pre-built content can be used to your advantage 2.30pm Coffee Break 2.45pm Making the most of UPK Professional This presentation and demonstration seeks to unlock the potential of UPK Professional for those that may not be fully utilising the tool   3.20pm Case Study How this client has utilised the tracking and reporting features within UPK Professional 3.40pm Summary and Conclusions 4.00pm Close

  Read the article

• Cientos de Directores Financieros se congregaron en el evento “Innovación y Excelencia en la Función Financiera”

  - by Noelia Gomez

  v\:* {behavior:url(#default#VML);} o\:* {behavior:url(#default#VML);} w\:* {behavior:url(#default#VML);} .shape {behavior:url(#default#VML);} El pasado 24 de Octubre tuvo lugar el evento “Innovación y Excelencia en la Función Financiera” en la Fundación Rafael de Pino, Madrid (que ya anunciamos aquí). APD, en colaboración con Oracle, organizaron esta jornada con el objetivo de analizar el proceso de transformación del Director Financiero en las compañías (aquí puedes ver un estudio sobre ello). Enrique Sanchez de Leon, Director de APD, fue el encargado de abrir la jornada con una calurosa bienvenida a los invitados. Tras él, Fernando Rumbero, Iberia Applications Cluster Leader de Oracle , comenzó dando unas pinceladas sobre los cambios a los que los Directores Financieros deben estar preparados para convertirse en parte de la estrategia de la compañía. Después de que todos los ponentes fueran presentados y se acomodaran en su lugar del escenario de aquella gran sala, Oriol Farré, Presales Director de Oracle, tomó la palabra para profundizar sobre el nuevo rol estratégico del Director Financiero y cómo éste se está convirtiendo cada vez más en el catalizador del cambio dentro de las empresas (¿tú lo eres? aquí hablamos de cómo puedes evaluarlo) Por su parte, Maria Jesús Carrato, Profesora de Dirección Financiera Internacional en el IE y Directora Financiera del Grupo SM mostró su visión sobre cómo serán los Departamentos Financieros del futuro. Después llego el turno de Ramón Arguelaguet, Financial Controller & Reporting Senior Manager de Vodafone, que profundizo en la innovación y la transformación lideradas por los Directores Financieros dentro de las organizaciones. Por último, pero no menos importante, Juan Jesús Donoso, Director Económico de Cruz Roja Española, nos mostro el punto de vista de la gestión de una organización sin ánimo de lucro. Finalmente, en la mesa redonda, cada uno de los integrantes dio su punto de vista sobre el nuevo rol de Director Financiero y los nuevos retos a los que se enfrentan. El broche final de la jornada la puso el coctel para abrir paso a un espacio de networking que sin duda los cientos de Directores Financieros aprovecharon para intercambiar puntos de vista, conocer a nuevos compañeros y reencontrarse con muchos otros. Si estuviste en el evento… ¿qué te pareció? Tal vez no encontraste el momento de plantear alguna cuestión. Ahora puedes hacerlo en los comentarios y se lo trasladaremos a los ponentes. Contact 12.00 Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin:0cm; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Calibri","sans-serif";}

  Read the article

< Previous Page | 378 379 380 381 382 383 384 385 386 387 388 389  | Next Page >