Search Results

Search found 10444 results on 418 pages for 'macbook pro retina'.

Page 382/418 | < Previous Page | 378 379 380 381 382 383 384 385 386 387 388 389  | Next Page >

• Still about SSD potentials...write and read speed

  - by Macroideal

  I have been working on SSD (solid state disk) for several months..Problems and Questions hit my head unexpectedly..Coz i am a virgin in ssd... Especially these days I was testing the write-read speed of ssd, which I was always caring.... however result turned out not good as I expected, or even worse Three kinds of read-write were implemented in my test read and write directly from and into ssd, with openning ssd as a whole device. in windows: _open("\\:g", ***).. It can be very tricky and hairy that you'd write a data with size of folds of 512, at the disk position of folds of 512bytes... So, If you wanto write just a byte or 4 bytes, you'v to write at least a whole sector one time. Read and write data from and into files located in SSD... Read and Write data from and into files in mechanical Disk I compared the pratices below...I found ssd sucks...the ssd performs worse than mechanical disk... so i am wondering where i can get the potential performance of ssd, since ssd is said to a substitute for mechanical disk in the future.. Nevertheless, I test ssd with a pro-hard-disk tools..ssd is like twice speedier than mechanical disk. So, why?

  Read the article

• Creating fillable, saveable PDF in OpenOffice.org results in garbage

  - by Ubuntourist

  I've been creating beautiful fillable PDFs using OOo Writer under Ubuntu for a few years. However, I've recently been asked to make them saveable rather than just printable. So, I go to my colleague's Windows computer which has Adobe Acrobat Professional 8, and following directions outlined in Save filled form in PDF file in Ubuntu. I end up with an unreadable, unfillable document. Acrobat Reader opens it, but it's garbage. It looks like it might be a character encoding issue. The document was created using Arial under Ubuntu. I installed OOo on the Windows box and changed the font to Tahoma. But with either font, the resulting file is a jumble of boxes and oddly placed random characters. Given that it fails with a fairly ubiquitous font, and a Microsoft specific font, I'm guessing it's not a font issue. Until I enable the rights, the PDF is readable both with Acrobat Reader and Acrobat Pro. Anyone else encounter the problem? If so, did you solve it? Thanks.

  Read the article

• How to back up non-standard directories in my user profile with Windows Backup?

  - by James Johnston

  I'm using Windows Backup to back up my Win7 Pro laptop. I'd like to use it to back up my complete user profile, but I only see standard profile directories (e.g. C:\Users\JohnstonJ\Documents) in the list. Non-standard ones aren't there (e.g. C:\Users\JohnstonJ\MyCustomDirectory). What's the best way to handle this? The only thing I can think of is to browse under the "Computer" entry and navigate directly to C:\Users\JohnstonJ and check off the entire profile (to get what's in there, and any new directories that come up). But is that going to back up the profile twice? Cause other unforeseen problems given that I checked it off by navigating through the computer, rather than picking it under the "Data Files" category? (e.g. back up temporary file garbage, files in use problems, etc. that the "Data Files" category might be handling better). Looking for solutions that other people use that are known to work well and still uses the Windows Backup software - I don't really want to fuss with 3rd-party backup software. Example - as you can see, I have two directories in my profile that Windows Backup is not offering to back up: "Dropbox" and "New folder": (Link to images album because I don't have enough reputation to directly embed them: http://imgur.com/a/Xyv5u)

  Read the article

• MySQL socket connections working, but not port connections

  - by Neil

  I installed MySQL community 5.1.45 on my Snow Leopard 10.6, using the pkg from their site. I had previously installed a MySQL binary from entropy.ch. In the previous installation, the connections were working fine before I upgrade to Snow Leopard. In Snow Leopard, both the installations are problematic. Using an app called Sequel Pro, if I connect with the socket operation, it connects properly. However, a standard connection with the same credentials doesn't work. From what I've understood, socket connections happen on the machine itself between processes, whereas normal connections occur over the network/ports, in this case a loopback to my machine, since the server and client are both on the same machine. My new CakePHP installation isn't being able to connect to the db with the root credentials I provided. Btw, I've been starting the MySQL server using the Preference Pane. When I tried running mysqld from terminal, it gave me: 100323 1:54:37 [Warning] Can't create test file /usr/local/mysql-5.1.45-osx10.6-x86_64/data/mbp.lower-test 100323 1:54:37 [Warning] Can't create test file /usr/local/mysql-5.1.45-osx10.6-x86_64/data/mbp.lower-test mysqld: Can't change dir to '/usr/local/mysql-5.1.45-osx10.6-x86_64/data/' (Errcode: 13) 100323 1:54:37 [ERROR] Aborting 100323 1:54:37 [Note] mysqld: Shutdown complete mbp is the name of my machine. How do I fix this so that my webserver can connect to the mysql server?

  Read the article

• Maximum RAM on Biostar P4M8PM7 Socket775 mATX board

  - by Alex Balashov

  I have a server with a Biostar P4M8PM7 ("Pro-M7") board based on a VIA chipset. It's a strange board to put in a server because it seems like more of a desktop board to me, but alas! It takes DDR2-667 (PC5300) RAM. What I can't figure out is the maximum amount I can put in it, as I cannot find the manual anywhere online. I've found a few marketing broadsheets from online retailers that say, "up to 2 GB of RAM!" but I am not sure whether to believe them. They also do not seem to be quite for the same board, as they indicate DDR2 400/533 RAM, for example: http://www.geeks.com/details.asp?invtid=P4M8P-M7. The manufacturer's web site says the same thing, but does not elaborate. It's a 64-bit CPU and board; is there a technical reason why the board would not be able to address more than 2 GB? Can someone tell me what sort of that reason that would be? I bought this server from someone really hoping I could put 8 to 16 in it, and wanted to do some research before I gave up. On a related note, it's not indicated anywhere whether it can take ECC RAM; the existing chips are not ECC, but most memory sold in the range I'm looking for (e.g. DIMMs with enough chip density to do 8 GB) seems to be server-class and for that reason ECC. Any ideas? Thank you very much for your consideration in advance!

  Read the article

• Time drift in Cloud Server - need to mainpulate GRUB config

  - by Aditya Advani

  We are hosting a VPS on a popular host and are experiencing a regular time drift of several minutes a day forward (approx 7). Linux Kernel: 2.6.18-164.11.1.el5 GNU/Linux Distro: CentOS release 5.4 (Final) We reached out to our hosting provider and their support advised us " This is a known issue with Cloud Servers. To fix this you will need to add one line to your grub config located at: /boot/grub/menu.lst The line you need to add is: noapic nolapic divider=10 nolapic_timer This should correct this issue. You will need to restart after this is added in. " Because I am wary of manipulating grub, mostly I'm terrified that our server may fail to restart - I ask you guys, the pro *nix admins - where exactly in this file does the recommended insertion below: # line from 1&1 for time syncing issue (Case 5163) noapic nolapic divider=10 nolapic_timer go? Please specify where exactly, and whether the order of commands is or is not important. Why is the block below "title CentOS ..." indented? If someone could give me an overview of how this works or point me to a resource that's easy to follow, that's what I'm looking for immediately, a light overview or basic understanding of what I;m doing. If GRUB and bootloaders are a deep dark treasure trove of kernel hacking or something, that's great well-recommended in-depth resources are also very welcome. This is my current /boot/grub/menu.lst # grub.conf generated by anaconda # # Note that you do not have to rerun grub after making changes to this file #boot=/dev/sda # serial --unit=0 --speed=57600 terminal --timeout=5 serial console timeout=5 title CentOS (2.6.18-164.11.1.el5) root (hd0,0) kernel /boot/vmlinuz-2.6.18-164.11.1.el5 ro root=/dev/hda1 console=tty0 console=tty initrd /boot/initrd-2.6.18-164.11.1.el5.img MOST IMPORTANT: I need to know where in the file above it is appropriate to paste the suggested line so I can confidently restart my VPS after manipulating GRUB config

  Read the article

• Should I upgrade to Symantec Endpoint Protection? [closed]

  - by Alex C.

  I'm the IT manager at an animal shelter in Upstate New York. We have a Windows network with about 50 desktops running Windows XP Pro. We used to use CA eTrust Antivirus, but that product didn't work too well (too many infections got through). About six months ago, we switched to using Symantec Antivirus Corporate Edition ver. 10.1.8.8000. If anything, the Symantec product is even worse. The last six weeks in particular have been very bad -- we've had about seven or eight PCs get hit with those malware infections that masquerade as antivirus software. In most of those cases, Symantec didn't even flag the malware at all. So... what gives with the Symantec Antivirus? As far as I can tell, it's installed correctly and downloading updated definitions nightly. I can upgrade to Symantec Endpoint Protection for $220 (we get non-profit pricing), but I don't want to do it if it's not going to be significantly better. Any advice? Should I switch to something else entirely? Thanks!

  Read the article

• Windows 7, network connection with no default gateway: any way to change the "Unknown network" statu

  - by e-t172

  Hi, I have a computer running Windows 7 Pro RTM. This computer has two network connections: A Wi-fi connection to the Internet (through a home router) which works just fine. An OpenVPN virtual network connection. More precisely, this is a virtual Ethernet connection which behaves exactly like a physical Ethernet wired connection. My problem is that the "Network and sharing center" shows "Unknown network" for the OpenVPN connection. After some research I found that logical networks (outside a domain) are identified by the MAC address of the default gateway of the connection. Problem is, the OpenVPN connection has no default gateway: it is a private network, so I don't need one... Consequently, the "Unknown network" is always considered public, so the firewall is always in "public mode", which I don't want. Plus, I can't rename "Unknown connection" or anything (which makes sense), so it is kinda ugly. My goal is to define a proper logical network for the OpenVPN connection with the private profile. I know of some workarounds (disable the firewall, modify security policy to make all unknown networks "private") but they're still workarounds. I just want my clients to connect to the VPN without having to disable their firewall settings, without changing global configuration with potential side-effects (the "security policy" solution) and without having to look at an ugly "Unknown connection" in the Network and sharing center. Is there any way I can do this? I tried to check what was going on in the registry (HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\NetworkList is interesting), but I still didn't find a way to "force" the OpenVPN connection to be assigned to a logical network. Any help would be very appreciated. A related question showed up at Superuser: http://superuser.com/questions/37355/windows-7-cant-identify-network/37422

  Read the article

• Printer deployment via Group Policy not working on a single system

  - by Aron Rotteveel

  One of my coworkers just got a new laptop running Windows 7 Pro x64. We use a GPO to deploy the printers to every system, but for some reason it is not working on this system. I have been breaking my head over this for the past 3 hours now without any result. The strange thing is that gpresult /H seems to indicate that the GPO did run. The hardware: Laptop: Windows 7 Professional x64 Print server: Windows Server 2008 x64 R1 HP Color LaserJet 2605dn HP LaserJet P2015 Driver packages on server: HP universal printer driver PCL5, both X86 as X64 Oddities and other info: GPO working flawlessly on every other system, including my own Windows 7 Ultimate X64 laptop gpresult /H shows the GPO being ran Windows Firewall completely disabled on the new laptop Below is the output for gpresult /H (in Dutch sadly, but I think you'll recognize it): Beleidsregels Windows-instellingen Printerverbindingen Pad Dominerend groepsbeleidsobject \\Server2008\HP Color LaserJet 2605dn Printers \\Server2008\HP LaserJet P2015 Printers Beheersjablonen Beleidsdefinities (ADMX-bestanden) opgehaald van de lokale computer. Configuratiescherm/Printers Beleid Instelling Dominerend groepsbeleidsobject Beperkingen van point-and-print Uitgeschakeld Printers Like I said, I have been trying to figure this out for the past few hours or so without any result, so you are my last hope. Any help is appreciated.

  Read the article

• How to completely disable laptop sound?

  - by Alvaro Rodriguez

  I have a HP Pavillion DV7 laptop with win 8 pro. The laptop has an unidentified problem with sound drivers or hardware that sometimes causes volume to constantly jiggle up and down. This is very annoying because of these consequences: Renders mute unusable - as the volume changes the sound unmutes automatically Causes an annoying win 8 "surface UI" notification to appear constantly in the upper left corner, which is distracting enough by itself, but more importantly Renders the whole "surface UI" unusable, because it loses focus whenever the sound changing notification appears When the jiggling happens, the laptop also loses the ability to redirect sound to earphones - sound comes out of the speakers even if earphones are connected. To solve these issues I want to completely disable sound in the laptop (I've tried reinstalling drivers several times to no end). I have tried disabling all sound related drivers and devices in the Device Manager but Windows re-enables those automatically whenever I restart the laptop. The BIOS doesn't have any settings to disable sound hardware either. Please don't suggest having the laptop sound serviced or fixed. It's not worth the expense. I just want to remove sound support so I can use it normally. It is very unusable as it is now.

  Read the article

• mysql startup, shtudown and logging on osx

  - by Joelio

  Hi, I am trying to troubleshoot some mysql problems (I have a table I cant seem to delete or drop, it hangs forever) I have 10.5.8 osx, I dont remember how/if I installed mysql, here is what I know: it automatically starts on boot the process looks like this: /usr/local/mysql/libexec/mysqld --basedir=/usr/local/mysql --datadir=/usr/local/mysql/var --pid-file=/usr/local/mysql/var/Joels-New-Pro.local.pid _mysql 96 0.0 0.0 75884 684 ?? Ss Sat06PM 0:00.02 /bin/sh /usr/local/mysql/bin/mysqld_safe when I run: /usr/local/mysql/libexec/mysqld --verbose --help it says: /usr/local/mysql/libexec/mysqld Ver 5.0.45 for apple-darwin9.1.0 on i686 (Source distribution) it seems to use my.cnf from /etc/my.cnf Now here are my questions: I dont see anything in the startupitems that remotely looks like mysql ls /Library/StartupItems/ BRESINKx86Monitoring ChmodBPF HP IO HP Trap Monitor Parallels ParallelsTransporter 1.) So how does it startup automatically? 2.) How do I start & stop this type of installation? Also, looking at the config, the logs have no values: /usr/local/mysql/libexec/mysqld --verbose --help|grep '^log' log (No default value) log-bin (No default value) log-bin-index (No default value) log-bin-trust-function-creators FALSE log-bin-trust-routine-creators FALSE log-error log-isam myisam.log log-queries-not-using-indexes FALSE log-short-format FALSE log-slave-updates FALSE log-slow-admin-statements FALSE log-slow-queries (No default value) log-tc tc.log log-tc-size 24576 log-update (No default value) log-warnings 1 3.) Does that mean there is no logging enabled in mysetup? thanks in advance! Joel

  Read the article

• Ballooning Mac OS X kernel_task and Wired memory usage. How to diagnose / fix?

  - by user28930

  I have a very strange issue, which I'm having a hard time diagnosing as to the root cause. I have a Mac Pro (2008, 8-core 2.8 GHz, 8800GT) with 14 GB of RAM (recently upgraded because of this issue!). When I boot my system and log in, vm_stat / top / Activity Monitor will show that kernel_task has about 150 MB allocated, and the machine has about 800 MB of Wired memory being allocated. Even initially, 800 MB seems an awful lot of wired memory to be allocated with no applications running - but, it gets worse. (NB: Wired is locked, unswappable memory) After a very short time, sometimes triggered by something as simple as launching a terminal, kernel_task will balloon to 8-900 MB of Real Mem (RSIZE), and Wired Memory will accelerate to 1.6 GB (implying that all the extra memory requests are for wired RAM in the kernel). If I quit everything (I.E: no running applications, bar an activity monitor or terminal to view top), there is no appreciable reduction in either kernel_task RSIZE, or Wired Memory usage. Going the opposite way, and loading the system with tasks also shows that wired memory does not get reduced - and that importantly it is not reduced in preference to heavy swapping. If I log out and log back in again, it reduces a bit (450 MB kernel_task, 1.28 GB Wired), but not back to the start. I'm not running any wacky kexts - and futhermore, kextstat shows no huge memory allocations there; the largest being com.apple.nvidia.nv50hal at about 4 MB of Memory. The machine feels overall more sluggish when this has happened - unsurprisingly because such a huge amount of RAM has been marked as non-pageable. So I have a few questions: 1) Is there a good way to diagnose what has allocated all of this wired memory? It's often over 2 times the kernel_task size, running no applications. The real memory total doesn't seem to add up - it seems that there is a bunch of RAM that isn't being accounted for anywhere. 2) What is happening to cause the kernel to suddenly require 6 times as much memory?

  Read the article

• Installing SATA dvd burner on machine with no spare SATA ports/connectors

  - by Faheem Mitha

  Greetings. I have the following motherboard Tyan Thunder K8WE S2895A2NRF Motherboard - extended ATX - nForce Pro 2200/2050 - Socket 940 - UDMA133, Serial ATA-300 (RAID) - 2 x Gigabit Ethernet - FireWire - 6-1 channel audio This is part of a computer that was assembled in the winter of 2006/2007. The user manual says the following with regard to SATA Integrated SATAII Generation 1 Controllers (from NForce Professional 2200) Two integrated dual port SATA II controllers Four SATA connectors support up to four drives 3 Gb/s per direction per channel NvRAID v2.0 support Supports RAID 0, 1, 0+1 and JBOD. I just purchased a SATA DVD burner. Here is the page for the product http://www.amazon.ca/gp/product/B002QGDWLK/ The problem I am facing is that I already have 4 SATA drives installed. I don't want to remove any of them. However, I want the DVD burner above installed as well. The person I am consulting with here (Bombay, India) tells me that my four available SATA ports are filled, and that my only option is to install a SATA card into the one free PCI slot on the motherboard. However, he says that with this setup I will not be able to boot from the DVD drive. Are these statements correct, and what are my other options if any? Even it the statements in the last para are true, I suppose I could use one of the motherboard connectors/ports there are currently being used with the hard drives with the DVD drive, and use the "add-on" connector with one of the hard drives. Not all the 4 hard drives need to be bootable. BTW, despite having read through http://en.wikipedia.org/wiki/Serial_ATA#Cables.2C_connectors.2C_and_ports I am fuzzy on the differences between connectors, cables and ports. Thanks in advance.

  Read the article

• Connect bluetooth headphones both to PC and phone at the same time

  - by Sergiy Byelozyorov

  I have recently bought Philips SHB6110. Extract from the 13th page of manual: Therefore you can connect your Bluetooth stereo headset. with a Bluetooth stereo enabled phone to both listen to music and lead calls, or with a Bluetooth phone that does not support Bluetooth stereo (A2DP) to lead calls and at the same time to a Bluetooth audio device (Bluetooth enabled MP3 player, Bluetooth audio adapter etc.) to listen to music. Make sure to pair the phone first with your Bluetooth headset, then turn both the phone and headset off to then pair the Bluetooth audio device. With the SwitchStream feature you can listen to music and monitor your calls at the same time. Even while listening to music, you will hear a ring tone when receiving a call and can switch to the call simply by tapping the button. The manual however doesn't specify how do I connect to both device at the same time. I use Toshiba Satellite Pro P300-1CG laptop with Belkin Mini Bluetooth Adapter and Nokia N95 phone. Operating system is Windows 7 64-bit and I have Skype installed. Both phone and compute can be used for listening to music and talking on the phone (on PC via Skype). Best solution would be if I could connect to PC and phone as the same time and monitor calls both mobile and Skype calls while listening music from Winamp. If that is not possible, then I would like at least to be able to listen music from PC, while monitoring calls from mobile. So, please tell me how do I connect both PC and phone to headphones?

  Read the article

• New Computer freezing up at random

  - by Benjamin Frost

  Since I built my system about 4 weeks ago I'v been getting random freezes, Sometimes it can happen directly after startup and sometimes it wont freeze up for 3-4 days of 24/7 running. It seems to be happening under all stress loads but mainly when the CPU is under 10% load. It doesn't give me a BSOD or anything, it simply just freezes and repeats the last sound before the freeze until I shut it down by the power button. I'v re-seated everything in the system except the CPU, Cleaned the RAM sockets and gold fittings. None of the components have been clocked above their factory settings as of yet, don't want to overclock them until I sort out these freezes. Temps are all well under the rated max temps, the highest the temps have been are below CPU: Low load: 16-21°C Full Load (100%) 40-43°C *(From HWMonitor by CPUID) GPU 1: Low Load: 25-30°C Full Load (100%): 45-50°C GPU 2: Low Load: 23-27°C Full Load (100%): 45-50°C *(GPU Temps from Catalyst Control Center) General Case temps Rear: 18-20°C Mid: 20-21°C Front (HDD/SSD Bays): 14-19°C (Case temps may be a little off as it's from the Kaze master pro fan controller) I have Un-installed EVERY driver for Motherboard, GPU & Soundcard and Re-installed twice. Windows is all up to date. To date i'v tried the following Running Memtest for 24 hrs straight, No errors Running Memtest on each individual RAM modules, No errors Reseated everything except the CPU Cleaned DIMM Sockets and Gold inputs Tested the Graphics cards 1 at a time Re-arranged all the SATA devices to run on Chipset controlled ports Re-installing all drivers OS: Win7 Professional 64bit Motherboard: ASRock X79 Extreme9 CPU: i7 3930k 3.2GHz GPU: Sapphire 7950 OC Edition V2 (2 card Crossfire) RAM: G.Skill Ripjaws Z F3-17000CL11Q-16GBZL 16GB (4x4GB) DDR3 Boot Drive: OCZ Agility 4 128GB Data Drive 1: Western Digital Black 2TB Data Drive 2: Western Digital Black 2TB Data Drive 3: Western Digital Green 3TB Power Supply: Corsair AX1200 Gold

  Read the article

• Virtual bridged networking with VLAN, could not ping

  - by v.yegy

  I require a virtual network with VLAN be build between two virtual hosts - which can be (lxc/ vbox -ubuntu or win xp). I tried with lxc and vbox with Ubuntu and was finding difficult to make it work without vlan, but was successful with vbox with xp. vbox-xp1 --- br1 ---------------- br2 ---- vbox-xp2 The config is: brctl addbr br1; brctl addbr br2 ifconfig br1 up; ifconfig br2 up stp br1 off; stp br2 off ip link add name br1-br2-l0 type veth peer name br1-br2-l1 sudo brctl addif br1 br1-br2-l0 sudo brctl addif br2 br1-br2-l1 vbox - xp 1 and 2 with network ; bridged and br1 and br2 respectively. The adapter is intel PRO/1000 MT Server and driver installed in guests. Configured IPs and two hosts pinged! VLAN config: ip link add link br1 name br1-2.5 type vlan id 5 brctl addif br2 br1-2.5 create vlan 5 in xp 1 and 2 and assign ip address Ping on with this config does not work. Wireshark trace on interface br1-br2-l1 / br1-2.5 shows that one ping results in ~240 ping packets and each growing by 4 bytes - first one being correct and 60, ping does not reach other host as I see mac is not learnt[arp -a]. -- if br1-2.5 is not configured, I see untagged packets in br1-br2-l1/0, but still not reaching other host as mac is not learnt. if br1-br2-l0/1 is made down, even if br1-2.5 is up, I count not see any packets. I tried with ebtables, but still could not make a correct config to work. -- If any one here are aware of any configuration, please let me know. I need to make a network of switches. Seems I have a very long way. Sorry for a very long question. Thanks and regards, vy

  Read the article

• Odd IIS FTP Failure

  - by Monkey Boson

  We're running a script on our production box that zips up our database and FTPs it to a backup box every night. Our production box is running Redhat Enterprise 5. Our backup box is running Windows XP Pro / IIS 5.1. Both machines are on the same VLAN (not sure if this is imporatant). The backup file usually clocks in at around 3GB. Every now and again (~5% of the time), the backup script fails. The shell script on the "client side" - which looks at return codes - never identifies any problem since ftp always returns 0. On the "server side", IIS writes out a log that looks like this: #Software: Microsoft Internet Information Services 5.1 #Version: 1.0 #Date: 2009-08-08 07:04:25 #Fields: time c-ip cs-method cs-uri-stem sc-status sc-win32-status 07:04:25 192.168.111.235 [15]USER backup 331 0 07:04:25 192.168.111.235 [15]PASS - 230 0 07:05:54 192.168.111.235 [15]created backup_20090808.zip 426 10035 07:06:16 192.168.111.235 [15]QUIT - 426 0 Now, I know that 426 means "Connection closed, transfer aborted", which is sort-of a catch-all for "IIS was not happy". The real puzzler is the wincode: 10035 (WSAEWOULDBLOCK -- Resource temporarily unavailable). My understanding is that this code is normal when using non-blocking socket calls - which would almost certainly be used by any FTP Server implementation. My first guess that it might be a timeout issue doesn't make sense, since we're only talking about a few minutes here and the timeout was left at the default 900 s. Does anybody have any ideas about what is causing this problem, and how it may be fixed? Thanks!

  Read the article

• Workstations cannot see new MS Server 2008 domain, but can access DHCP.

  - by Radix

  The XP Pro workstations do not see the new replacement domain upon boot; they only see their cached entry for the old (server 2003) domain controller. The old_server is not connected to the network. I have DHCP working with the same scope as the old_server. In my "before-asking" search for a solution I came across the following two articles, and I recall doing things as suggested by the articles. http://www.windowsreference.com/windows-server-2008/how-to-setup-dhcp-server-in-windows-server-2008-step-by-step-guide/ http://www.windowsreference.com/windows-server-2008/step-by-step-guide-for-windows-server-2008-domain-controller-and-dns-server-setup/ The only possible issue is: I was under the impression that the domain netbios needed to match the DC's netbios. The DC netbios is city01 while the domain's FQDN is city.domain.org (I think this is mistaken and should have been just domain.org) But, the second link led me to a post which I believe answers my question. I did as they instructed by opening Local Area Connection Properties, then selecting TCP/IPv4 and setting the sole preferred DNS server to the local hosts static IP (10.10.1.1). Search for "Your problems should clear up" for the post I'm referencing: http://forums.techarena.in/active-directory/1032797.htm Have I misunderstood their instructions? I am hoping to reach the point where I can define users and user groups. Also, does TechNet have a single theoretical overview document I could read. I really don't like treating comps as magic. I will be watching this closely and will quickly answer any questions. If I've left anything out it is because I did not know it was needed. PS: I am loath to ask obviously basic questions, but I am tired and wish to fix this before tomorrow. Also, this is my first server installation, thank you for your help.

  Read the article

• Intel DriverInstall issue on HP ProLiant server DL580G5

  - by TomTom

  Given: A HP ProLiant server to be used for Hyper-V server (R 2) Problem: The server has a HP NC364T quad port card, which actually is an Intel 1000 Pro adapter. We are stuck getting this adapter properly working. We need to get it working with: 2 trunks of 2 ports each one of them fully vlan "aware" (without filtering anything - so that Hyper-V can do the VLAN filtering). So far we did: Install the server Install latest PSP. Problem here - tool does not work to set up teaming. We tried to install the latest ProWin pack from Intel - the drivers there are a LOT more current (26th of Marrch 2010, 9.13.41.0). The intalled driver (Microsoft) is ancient (march 2009, 9.13.4.10) A driver update fails both on command line (pnputil) as well as the PortLock device manager executable. No informatoin is provided. the ANS toolset can not create teams (fails with error - again, no reason provided), I know of no logs and the event log has no information either. Questions: What are the best drivers to use? How do we actually install them? How can we then set up teaming and how do we set up the VLAN behavior wanted?

  Read the article

• can't access SATA card config screen on boot, nor access the disks

  - by Ronald

  We've just upgraded our file server using an ASUS P6T WS Pro board, running FreeBSD-RELEASE 8.2 and using zfs to manage 12 WD20EARS disks. Since our 3ware card has been giving us trouble we started using the six on-board SATA connectors and got a SuperMicro USAS2-L8i to provide eight more ports. Mechanically, the card is an awkward fit but electrically it all seems ok. Upon boot, the LSI controller shows up and states that pressing ctrl-c will bring up the LSI Config Utility. When doing that, the message changes to state that the utility will be started after initialization, however that never happens. There does seem to be an error message that's only displayed too briefly to read and seems to be about PCI and "not enough space". (That message is pushed off by a hardware summary and I've found no way to scroll back at this point.) The disks do not show up in any recognizable ways after booting, either. I found a hint in another discussion to check the address mapping on either the card or the motherboard BIOS, but have found no way to do that. So what I tried on a hunch is to disable everything that's on-board, including network adapters, Firewire controller and SATA. In fact, after doing that, I can successfully launch the LSI Config Utility. As far as I can tell, all looks well in there, and when booting in that configuration it also displays a list of the disks connected to it, which looks just fine as well. Only problem now is that I can't boot that way, because I need the on-board SATA controller and network adapters. As soon as I re-enable any of them I'm back to square one. That discussion I mentioned about mapping addresses said to try D000, then D7FF, then DFFF, in order. The LSI Config Utility shows the card address as D000 but offers no way of changing it. Any tips or insights would be appreciated.

  Read the article

• Windows 7 Media Center PC not displaying MKV files properly

  - by David

  Does anyone know why Windows Media Center wouldn't correctly display a 16x9 video? I just upgraded my home-built HTPC from Vista Ultimate (hey, it was a giveaway) to Windows 7 Ultimate - clean install. After that, I installed the Divx7 beta (to get .MKV support) and AC3filter (so I could HEAR the MKV files). Previously, under Vista Ultimate (32 bit), I had Arcsoft's Total Theater Pro for playing Blu-Rays and MKV decoding under Media Center. Now when I play a 720p 16x9 MKV file, I get some 'letterboxing' - like it's halfway between 4x3 and 16x9 - with the aspect ration looking alightly squished as a result. Here's the wierd part. If I use the Media Center connection software in my XBox 360 - it plays perfectly, filling the 16x9 screen edge-to-edge, just like Vista's WMC software USED to. Of course, beats the network up because the XBox goes to the HTPC, the HTPC goes to my WHS machine to fetch the data, it comes back to the HTPC, gets transcoded and streamed back to the Xbox. I'm running the latest drivers for an NVidia card (as fetched by Windows 7). I have no idea WHY this is because if I play "ordinary" (i.s. SD) Divx files that are 16x9, they play just fine, scaled right up to my screen's edges. It puzzles me as to why the same machine that properly converts the bits for the Xbox can't display/scale them properly for the attached display. Mind you, Windows Media Player exhibits the same symptoms. Ideas?

  Read the article

• How do I deny access to everybody but me in Windows 7?

  - by GregH

  I am trying to set up a file server on my my Windows 7 Pro system at home. I set up one common "Share" folder that I have shared/published. Within the share folder I want to have individual folders for me and my wife...that is only I can read/write my folder and only my wife can read/write to her folder and neither of us can read the contents of the other person's folder. Then I want to have a "public" folder where we can both read/write to contents of the folder as well as any sub-folders created, but my "kids" account can only read from this folder and sub folders. It seems really confusing to set up something like this and it really shouldn't. I am really confused between the "allow", "deny", and dimmed check boxes in the security tab. It seems that if I "Deny" access to "Everyone" on my private folder, then I don't even have access to it. Windows security seems backwards from the rest of the world's security models. If I am in two groups and I deny access to one of the groups but allow access to the other group then Windows security denies me access as I am in one of the groups that has access disallowed. Very confusing.

  Read the article

• Second ip address on same interface CentOS 6.3

  - by user16081

  I tried to add a second LAN addresses in CentOS 6.3 on a brand new install and it's not working. I installed a new copy of CentOS 5.7 and tried the same and it worked right away. Now I'm just trying to setup the alias on the same subnet and it's not working. what am i doing wrong, is this not possible on CentOS 6.3? second ip address on the same interface but on a different subnet CentOS 5.7 it works: DEVICE=eth0 BOOTPROTO=static BROADCAST=192.168.0.255 HWADDR=00:0C:29:01:6F:89 IPADDR=192.168.0.167 NETMASK=255.255.255.0 NETWORK=192.168.0.0 ONBOOT=yes DEVICE=eth0:0 BOOTPROTO=static BROADCAST=192.168.0.255 HWADDR=00:0C:29:01:6F:89 IPADDR=192.168.0.166 NETMASK=255.255.255.0 NETWORK=192.168.0.0 ONBOOT=yes On CentOS 6.3: does not work DEVICE=eth0 BOOTPROTO=static BROADCAST=192.168.0.255 HWADDR=00:0C:29:1E:DE:86 IPADDR=192.168.0.242 NETMASK=255.255.255.0 NETWORK=192.168.0.0 GATEWAY=192.168.0.1 ONBOOT=yes DNS1=205.134.232.138 DNS2=4.4.4.4 DEVICE=eth0:0 BOOTPROTO=static BROADCAST=192.168.0.255 HWADDR=00:0C:29:1E:DE:86 IPADDR=192.168.0.240 NETMASK=255.255.255.0 NETWORK=192.168.0.0 ONBOOT=yes # /etc/init.d/network restart Shutting down interface eth0: Device state: 3 (disconnected) [ OK ] Shutting down loopback interface: [ OK ] Bringing up loopback interface: [ OK Bringing up interface eth0: Active connection state: activated Active connection path: /org/freedesktop/NetworkManager/ActiveConnection/3 [ OK ] # ping 192.168.0.240 PING 192.168.0.240 (192.168.0.240) 56(84) bytes of data. From 192.168.0.242 icmp_seq=2 Destination Host Unreachable Appreciate any advice, thanks Update: Perhaps this is relevant? On CentOS 5.7: # dmesg |grep eth eth0: registered as PCnet/PCI II 79C970A eth0: link up eth0: link up On 6.3: # dmesg | grep eth e1000 0000:02:00.0: eth0: (PCI:66MHz:32-bit) 00:0c:29:1e:de:86 e1000 0000:02:00.0: eth0: Intel(R) PRO/1000 Network Connection e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None 8021q: adding VLAN 0 to HW filter on device eth0 eth0: no IPv6 routers present

  Read the article

• Huh? JDK not found? (on Windows 7 64-bit)

  - by Android Eve

  I am setting up a development environment for the latest Android 2.3 on a fresh install of Windows 7 64-bit. I first installed the 64-bit JDK 6 (jdk-6u23-windows-x64.exe). Then, I installed 64-bit Eclipse Classic 3.6 (eclipse-SDK-3.6.1-win32-x86_64.zip). Then, I proceed to install the Android SDK Starter Package: installer_r08-windows.exe. But... upon start it says: "Java SE Development Kit (JDK) not found." Why? I just installed it. Is this a mismatch between 32-bit and 64-bit? How do I solve this? Update (1): I tried setting the %JAVA_HOME% environment variable, as well as setting the Installed JREs in Eclipse, as suggested below. None of these solved the problem. It appears that I am not the only experiencing the problem, as this thread suggests: http://stackoverflow.com/questions/1919340/android-sdk-setup-under-windows-7-pro-64-bit I wonder whether there is a 64-bit version of the Android SDK. Update (2): I used the zip version instead (android-sdk_r08-windows.zip), ran android.bat, updated all SDK packages, and installed the ADT plugin (8.0.1), not before having to check: 'Contact all update sites during install to find required software'. We'll see how this goes... Update (3): It worked! (going to accept @bubu's answer shortly) -- but why doesn't the emulator include the HelloAndroid app when I run it (Ctrl+F11) from Eclipse?

  Read the article

• New monitor connected to HDMI adaptor doesn't show output after booting

  - by Paul

  Hello out there in the multiple monitors’ world. I am a very old newbie in your world and need help. I just purchased a new Asus VH236H monitor and hooked it up the HDMI port of an ATI Radeon HD4300 / 4500 Series display adaptor. I left the old Princeton LCD19 (TMDS) hooked up to the DVI port of the same display adaptor. Both monitors displayed the boot sequence, after I fired good old Sarastro2 (Asus P5Q Pro Turbo – Dual Core E5300 – 2.60 GHz) up. The Asus lacked one half of a second behind the Princeton until the Windows 7 Ultimate SP 1 boot up was complete. Then the Asus displayed “HDMI NO SIGNAL” and went into hibernation. The Princeton stayed lit up as before. Both monitors are displayed on the “Screen Resolution Setup Display” and I plaid around with them for a while. The only thing I accomplished was to shove the desktop icons from the Princeton to the still hibernating Asus. The “Multiple displays:” is set to “Extend these displays”, the Orientation is “Landscape” and the Resolutions are set on both to the “recommended” one. Both monitors show that they work properly in the advanced Properties display. What am I doing wrong, what am I missing? Never mind the opinions about the different resolutions of the two monitors. I always can unhook the Princeton and give it to a Goodwill Store if I do not like the setup. I just would like to make it work. Any constructive help is very much appreciated, Thank you.

  Read the article

< Previous Page | 378 379 380 381 382 383 384 385 386 387 388 389  | Next Page >