Search Results

Search found 12330 results on 494 pages for 'old retired dude'.

Page 382/494 | < Previous Page | 378 379 380 381 382 383 384 385 386 387 388 389  | Next Page >

  • heavy load on mysql

    - by payal
    i have dedicated server with very good configuation like 16 gb ram etc but i am facing heavy load from mysql i am running a music wesbite however only one database is running and 5-10 pages are only running.when i click on whm show processlist it shows only 2-3 processes However whm load is always less than one but when i click on whm load it shows 20% of cpu usage by mysql and after some time it starts saying can not connect to mysql . mysql server has gone away 1691 (Trace) (Kill) mysql 0 19.2 2.7 /usr/sbin/mysqld --basedir=/ --datadir=/var/lib/mysql --user=mysql --log- error=/var/lib/mysql/server.xyz.com.err --pid-file=/var/lib/mysql/server.xyz.com.pid i have tested static pages they are coming blezing fast but all dynamic pages which are using mysql is coming damn slow it takes years to open.. my.conf file is [mysqld] key_buffer = 1536M max_allowed_packet = 1M max_connections = 250 max_user_connections = 15 wait_timeout=40 connect_timeout=10 table_cache = 512 sort_buffer_size = 2M read_buffer_size = 2M read_rnd_buffer_size = 8M myisam_sort_buffer_size = 64M thread_cache_size = 8 query_cache_size = 32M server-id = 14 old-passwords = 1 [mysqldump] quick max_allowed_packet = 16M [mysql] no-auto-rehash [myisamchk] key_buffer = 256M sort_buffer_size = 256M read_buffer = 2M write_buffer = 2M [mysqlhotcopy] interactive-timeout ihave checked log error file it says nothing.i have increased maximum connnection also to 1000 but still same problem is there .if i disconnect that one databasejust by changing the name of database i can see withing half hour the load of server and mysql goes down to negliglble .i have tested everything and if there are some query which can cause heavy load to server can you please list which type of query can cause heavy load on server then also for 5-10 pages it will never cause that much heavy load. i have seen server with 500 websites but was working just fine.

    Read the article

  • Hyper-V: Dedicated NIC for Guests VMs

    - by TheLizardKing
    I have two NIC cards and created a private virtual network for my virtual machines and unchecked "Allow management operating system to share this network adapter" which basically turns my Guest NIC into this sorta shell of a NIC card on the host machine and the only thing checked in it's properties is "Microsoft Virtual Network Switch Protocol" which I am fine with. Everything works and everything is connected. My issue is that for some reason my guest (Ubuntu Server with legacy network drivers) is not talking properly to my DHCP server. Specifically my DHCP server reserves the guest's IP address using it's MAC address but the guest isn't picking it up. It's picking up any old IP it can get and I can't even ping the hostname from another PC on the network but it pings fine if I use the IP. I see the guest showing up in my DHCP table but I can't get the reservation to stick. Is there some reason it's only partially communicating with my DHCP server? Pinging it's hostname on itself reveals it's using 127.0.0.1 instead of it's network IP. Is this an issue with the legacy drivers used in Hyper-V?

    Read the article

  • Connect to Nonencrypted Wireless Network Using Ubuntu Commands

    - by Tim
    I failed to connect to an open i.e. nonencrypted wireless network using Ubuntu command lines. Here is what I did: $ sudo /etc/init.d/NetworkManager stop * Stopping network connection manager NetworkManager [ OK ] $ sudo /sbin/ifconfig wlan0 up $ sudo iwconfig wlan0 essid "Cavalier High-Speed 866-4-CAVTEL" $ sudo dhclient wlan0 There is already a pid file /var/run/dhclient.pid with pid 10812 killed old client process, removed PID file Internet Systems Consortium DHCP Client V3.1.1 Copyright 2004-2008 Internet Systems Consortium. All rights reserved. For info, please visit http://www.isc.org/sw/dhcp/ wmaster0: unknown hardware address type 801 wmaster0: unknown hardware address type 801 Listening on LPF/wlan0/00:0e:9b:cd:4e:18 Sending on LPF/wlan0/00:0e:9b:cd:4e:18 Sending on Socket/fallback DHCPREQUEST of 192.168.1.67 on wlan0 to 255.255.255.255 port 67 DHCPREQUEST of 192.168.1.67 on wlan0 to 255.255.255.255 port 67 DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 7 DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 7 DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 8 DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 12 DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 21 DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 6 No DHCPOFFERS received. Trying recorded lease 192.168.1.67 PING 192.168.1.1 (192.168.1.1) 56(84) bytes of data. --- 192.168.1.1 ping statistics --- 1 packets transmitted, 0 received, +1 errors, 100% packet loss, time 0ms Trying recorded lease 192.168.1.45 PING 192.168.1.1 (192.168.1.1) 56(84) bytes of data. --- 192.168.1.1 ping statistics --- 1 packets transmitted, 0 received, +1 errors, 100% packet loss, time 0ms No working leases in persistent database - sleeping. $ sudo /sbin/iwconfig wlan0 wlan0 IEEE 802.11bg Mode:Managed Frequency:2.422 GHz Access Point: Not-Associated Tx-Power=27 dBm Retry min limit:7 RTS thr:off Fragment thr=2352 B Encryption key:off Power Management:off Link Quality:0 Signal level:0 Noise level:0 Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0 I was wondering what the problem is and how I can do it right? Thanks and regards!

    Read the article

  • OS X superuser folders automatically created. Perusers launchd process appears to kill 501

    - by Ric Pen
    New Apple laptop OSX 10.8.2. I have used OS X but many years previously, and am not familiar with subtleties or changes in com.apple.launchd.peruser.x... I have previously (and in retrospect, foolishly) made changes to these rapidly spawned new peruser accounts (my initial reaction was that if ipfw was disabled, then I might well be under hacker attack, which I have dealt with, years ago), but I believe I was wrong, and the results of my efforts at preserving the system's integrity have in fact been destructive, overreactive, and have resulted in much work to restore. My understanding from other posts is that superuser protocols have changed quite dramatically since I bought the first developer version of OS X many years ago. Haven't developed on Apple much since then, w/ exception of WebObjects (IMO, much underrated at that time, and was more user friendly than ASP (prior to .NET, I vaguely recall). Creation of apparently nasty peruser folders appear to confound 501 process, which logs inability to find firewall (ipfw). Can someone help me with this? I am concerned that either the system is improperly configured, an application was improperly installed (although there is little here beyond Apple's SDK, which I find quite accommodating and intuitive). Still, I am a novice, only sporadically develop at this time, and would really just like to see this system running happily. Please offer assistance, in the form of potential info sources, or if you have had a similar experience, then perhaps scripts to suss out this issue. I do not wish to damage the system, but Apple's Developer connection and discussion threads do not appear to have dealt with this particular issue recently... Although I may well have missed something you have not - please apprise. Any assistance on this issue is very much appreciated - by an old guy, who wants to do some things which were fun about 20 years ago.

    Read the article

  • Microsoft Access: computer freezes when user tries to update record

    - by CarlF
    A colleague and I have developed an Access 2003 database which is used throughout our department. Currently about four dozen people do data entry using one of two very similar forms. If 47 of us use them, they work perfectly. If Mr. 48 clicks the "Save" button, Windows XP freezes and a hard reset is needed. The problem has to be on his specific computer (Dell latitude D630) and not in the code because this problem only affects him. Complicating the matter: I don't work for IS, and this project is not supported by IS. If I'm going to get our tech support to fix the problem I had better be able to explain exactly what to do and how to do it, because they aren't going to invest any resources. I don't even have admin rights on the computer (and neither does its regular user). I've asked him to bring his laptop the next time he visits my building. (Just to make matters worse, he doesn't usually work in the same location as me or the other developer.) Any suggestions on debugging the problem? My first try will be to uninstall and reinstall Office, which I can do using corporate utilities without being admin. Note: yes, those are old versions of Office and Windows. We expect to upgrade later this year.

    Read the article

  • Connect to WEP Wireless Network by command line on Ubuntu

    - by Tim
    Hi, I am a newbie to both network and Linux. I am now trying to connect to a WEP wireless network by command line on my Ubuntu 8.10, because the Network Manager does not support 64 bit WEP. (1) I firstly bring down the Network Manager and then try to connect to a wireless network, whose essid is candy and password is 5673212741. But it fails as shown in the following. I wonder why and how to do it correctly? $ sudo /etc/init.d/NetworkManager stop * Stopping network connection manager NetworkManager [ OK ] $ sudo iwconfig wlan0 essid candy opendo iwconfig wlan0 key 18018ce78e open $ sudo iwconfig wlan0 key 5673212741 open $ sudo dhclient wlan0 There is already a pid file /var/run/dhclient.pid with pid 9971 killed old client process, removed PID file Internet Systems Consortium DHCP Client V3.1.1 Copyright 2004-2008 Internet Systems Consortium. All rights reserved. For info, please visit http://www.isc.org/sw/dhcp/ wmaster0: unknown hardware address type 801 wmaster0: unknown hardware address type 801 Listening on LPF/wlan0/00:0e:9b:cd:4e:18 Sending on LPF/wlan0/00:0e:9b:cd:4e:18 Sending on Socket/fallback DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 7 DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 12 DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 20 DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 13 DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 9 No DHCPOFFERS received. No working leases in persistent database - sleeping. $ ping www.bbc.co.uk ping: unknown host www.bbc.co.uk (2) A less important question: why the scan for wireless networ does not work after I bring down the Network Manager? $ sudo /etc/init.d/NetworkManager stop * Stopping network connection manager NetworkManager [ OK ] $ sudo iwlist wlan0 scan wlan0 Interface doesn't support scanning : Network is down Thanks and regards!

    Read the article

  • Errors generating gpg keypair

    - by Evan Lynch
    I posted this originally on stackoverflow, but was told that it was offtopic and this would be the better place to post it, so I am reposting it here and deleting my original topic. I have a rather old PGP key, but I've long ago lost the private key for it, so I'm trying to generate a new key with GPG on Windows 7. While it technically generates the key, GPA crashes every time I generate the keypair. I've tried this four times now and just downloaded what appears to be the latest version of Gpg4Win and am still receiving this problem. A comment on my original post informed me that GPA crashes is not a very good description of the problem, but unfortunately I can't do much better than that: all it tells me is "gpa.exe has crashed and will close now", I don't get an error dump or anything. Is there anything I can do to fix this, or is this just a bug in the latest version of Gpg4Win? Here are the specs of GPG that I'm using: GPA 0.9.4. GnuPG 2.0.22. My operating system is Windows 7 64 Bit, and I have 5 GB of RAM. Also, I was told to try generating the keypair on the command line but can't find any documentation for how to do this in Windows 7. If anyone could link me to current documentation for this, that would be a good workaround for solving this problem.

    Read the article

  • unable to copy file to folder, permission denied without explanation

    - by ValekHalfHeart
    Recently Norton Internet security deleted ml.exe (an assembler I use to program in masm32) off of my computer, thinking that one of the programs I had written with it was a virus (it was most certainly not). Fortunately, I had a copy of ml.exe backed up in an external hard drive, and tried to copy it over to my computer. The old ml.exe was located in C:\masm32\bin, so I tried to copy the new one to that location. After disabling Norton (which had opened the folder and preventing me from accessing it), I am still unable to copy the new file to C:\masm32\bin. When I tried, Windows announced that I would need Administrator permission to copy the file. Since I'm an admin, I figured this wouldn't be a problem although it was unexpected, as I have never had to provide administrator permission to access this folder before. However, instead of prompting me to enter my password, Windows simply refuses to copy the file: I repeat, I was not asked to provide a password. It simply says that I do not have permission. Does anyone know what's happening and how to fix it? Is Norton still causing problems, or it something else?

    Read the article

  • How do I install php 5.3 on CentOS?

    - by fivelitresofsoda
    Hi, I have to install php5.3 on my centos server. If i do yum install php, the base repo installs 5.1.6 which is too old for the apps i need to install. So i've been trying to use the ius repository, following the official instructions from ius: root@linuxbox ~]# wget http://dl.iuscommunity.org/pub/ius/stable/Redhat/5/x86_64/ius-release-1-2.ius.el5.noarch.rpm root@linuxbox ~]# wget http://dl.iuscommunity.org/pub/ius/stable/Redhat/5/x86_64/epel-release-1-1.ius.el5.noarch.rpm root@linuxbox ~]# rpm -Uvh ius-release*.rpm epel-release*.rpm Ok. Now i simply do yum install php53, etc for all i need... but i get this error: Running rpm_check_debug Running Transaction Test Finished Transaction Test Transaction Check Error: file /usr/bin/php from install of php53u-cli-5.3.4-3.ius.el5.x86_64 conflicts with file from package php-cli-5.1.6-27.el5_5.3.x86_64 file /usr/bin/php-cgi from install of php53u-cli-5.3.4-3.ius.el5.x86_64 conflicts with file from package php-cli-5.1.6-27.el5_5.3.x86_64 file /usr/share/man/man1/php.1.gz from install of php53u-cli-5.3.4-3.ius.el5.x86_64 conflicts with file from package php-cli-5.1.6-27.el5_5.3.x86_64 file /etc/php.ini from install of php53u-common-5.3.4-3.ius.el5.x86_64 conflicts with file from package php-common-5.1.6-27.el5_5.3.x86_64 Error Summary ------------- I have no idea how to solve this. I think i have to delete the base packages however as a linux noob i don't know how to do that. Please help. Thank you.

    Read the article

  • Unexpected(?) high 'wasted' memory in memcached

    - by Nanne
    Looking at our memcached stats I think I have found an issue I was not aware of before. It seems that we have a strangely high amount of wasted space. I checked with phpmemcacheadmin for a change, and found this image staring at me: Now I was under the impression that the worst-case scenario would be that there is 50% waste, although I am the first to admit not knowing all the details. I have read - amongst others- this page which is indeed somewhat old, but so is our version of memcached. I think I do understand how the system works (e.g.) I believe, but I have a hard time understanding how we could get to 76% wasted space. The eviction rate that phpmemcacheadmin shows is 2 ev/s, so there is some problem here. The primary question is: what can I do to fix this. I could throw more memory at it (there is some extra available I think), maybe I should fiddle with the slab config (is that even possible with this version?), maybe there are other options? Upgrading the memcached version is not a quickly available option. The secondairy question, out of curiosity, is of course if the rate of 75% (and rising) wasted space is expected, and if so, why. System: This is currently not something I can do anything about, I know the memcached version isn't the newest, but these are the cards I've been dealt. Memcached 1.4.5 Apache 2.2.17 PHP 5.3.5

    Read the article

  • Looking for ballpark pricing on an affordable a Cisco VOIP solution for our office

    - by guytech
    We have about 8 incoming PSTN lines that are currently on an old and antiquated Nortel Meridian ICS system. This system has been giving us some grief. We're looking for a new VOIP solution. I've been looking at a Cisco solution and it does seem pricey but I'm sure effective. Unfortunately, we probably can't afford a Cisco Unified Communications 520 which seems to be the ideal solution. We have about 15 people who need an extension and voicemail. We really don't have any need for a fancy system just an auto attendant of some sort when people call us. It looks like we'll have to get an older router and an addon card for what we're looking for to get best value pricing. However, I don't know a a lot about Cisco voice products so I'm a bit lost as to what to get. The only thing I am sure on is the pricing on VOIP phones which we expect to be about ~$100-200. However, I'm not sure what pieces of VOIP infrastructure to get. Any advice? I am familiar with Asterisk but right now I'm looking on pricing concerning a Cisco solution.

    Read the article

  • SSL connection hangs as client hello (curl, openssl client, apt-get, wget, everything)

    - by Niklas B
    Hi, I've run into a problem on my Debian VPS (a xen domU) regarding SSL. Namely almost all SSL connections hangs at client hello. For example: # curl -vI https://graph.facebook.com About to connect() to graph.facebook.com port 443 (#0) Trying 66.220.146.48... connected Connected to graph.facebook.com (66.220.146.48) port 443 (#0) successfully set certificate verify locations: CAfile: none CApath: /etc/ssl/certs SSLv3, TLS handshake, Client hello (1): It's the same when using the openssl client. However, some of the SSL traffic works (for example https://www.nordea.se). Server #uname -a Linux server.com 2.6.26-1-xen-amd64 #1 SMP Fri Mar 13 21:39:38 UTC 2009 x86_64 GNU/Linux It does however work on my Dom 0 (the main xen host). Apt-get I can't even run apt-get update with the debian security sources (hangs on reading headers) Open SSL At the begining I thought I had an old openssl client (0.9.8o-4) since I appeared to have a newer on the Dom 0 (0.9.8g-15+lenny8) but doing a manuanl update on the openssl deb didn't help. Open SSL Client This is the full output of when the openssl client hangs: http://pastebin.com/PAjwMap9 Closing thoughts I've Googled the crap out of this, and I'm not getting any further. I've seen problems with curl, apt-get etc. but they are all specific relating to the very application - not general for the system. Any thoughts?

    Read the article

  • apache2 server running ruby on rails application has go daddy cert that works in chrome/firefox and ie 9 but not ie 8

    - by ryan
    I have a rails application up on a linode ubuntu 11 server, running apache2. I have a cert purchased from godaddy, (where we also bought our domain) and the cert is installed on my server. Part of my virtual host file: ServerName my_site.com ServerAlias www.my_site.com SSLEngine On SSLCertificateFile /path/my_site.com.crt SSLCertificateKeyFile /path/my_site.com.key SSLCertificateChainFile /path/gd_bundle.crt The cert works fine in Chrome, FireFox and IE 9+ but in IE 8- I get this error: There is a problem with this website's security certificate. The security certificate presented by this website was issued for a different website's address. I'm hosting multiple rails apps on this same server (4 right now plus some old php sites that don't need ssl). I have tried googling every possible combination of the error/situation that I could think of but at this point I'm shooting in the dark. The closest I could come up with is that some versions if IE don't support SNI. But that doesn't apply here because I am getting the warning on windows 7 machines running IE 8, and the SNI only seemed to apply to IE 8 if the operating system was windows XP. So why is this cert being accepted by all browsers but giving me a warning in IE 8? Edit: So doing a little more digging and I figured out some more. It turns out this is effecting IE 9 as well. However the problem seems to be that IE is not traversing the ssl chain to get to the right cert. FireFox and Chrome when I go to view certificate show the correct one, but IE is showing one of our other sites certificates. REAL QUESTION HERE: That being the case why is IE not getting the right certificate when others are and how do I fix it?

    Read the article

  • Does this mean the router is faulty?

    - by Ashfame
    I have a router to which I have my desktop (running Ubuntu) connected via LAN & I use it on my phone via wifi. Sometimes it happen that the LAN one will stop working for no reason but the wifi will work fine. And it will resolve away by itself. Since last night, the router was restarting again & again on its own, so I lodged a complaint about it and they said the router is faulty and will be replaced, but I know they don't know anything about how things work & is just going to shoot an arrow in the dark. These restarts has happened for the first time, LAN-wifi issue described earlier is a common one (but not frequent one). So is the router faulty or there is some issue from my ISP side which will continue to persist even after they change the router? My very best guess is that they will replace it with an older refurbished router which will tend to give me more troubles in the coming time, so its better if I change it only its faulty (this is a new one - 6months old, I am its first hand user). I am happy to provide any details.

    Read the article

  • Why does my Belkin Play router regularly stop working for a few minutes at a time?

    - by YeahStu
    I recently purchased a Belking Play dual-band router for my home. About every few hours, the router stops working or "cuts out" for several minutes before coming back online automatically. My old one did this as well. I figured out a main problem was my wireless home phone, which sends a 2.4GHz signal. Anytime someone would call the phone, my router would get interrupted. Therefore, I unplugged this phone and got a wired phone. Unfortunately, my wired phone has the same problem. Therefore, I unplugged the wired phone. Unfortunately, my router still has regular issues. I live in a home with neighbors within close proximity to me, so it might be possible that their devices are the ones causing me problems. How can I determine what is causing my router problems? I thought that the point of a dual-band router was that if a signal was interfering on one band then it would be uninterrupted on another. However, it seems that is not the case. Does anyone have any tips on how to troubleshoot this or any knowledge you can share to properly set my expectations?

    Read the article

  • How can I report a website that uses the webmail APIs to send spam?

    - by Igoru
    I've signed up for a cool job website that, unfortunately, asks you if you want to "invite your friends", and if you say so, you can give them access to your Gmail contacts to send the invite. However, contrary to what everyone would be expecting, they don't give you a list of who you want to invite; instead, they simply directly send spam to your entire contact list, like old-fashioned Outlook viruses. When you complain about this with them, they simply say "we will check the application and see if there is anything that might be confusing for the users". For me and some other friends (that felt for the same prank), this is a clear break on web best practices and a big disrespect on the users' trust. Thus, I would like to know what can we do to stop the website of using Gmail/Yahoo/Outlook APIs to send spam this way. P.S.: I wonder what would happen if I've given this website the access to post in my Facebook timeline as well. I've got a couple of calls from relatives asking about the email and I wonder how many unrelated people got this spam, like HR addresses from my past and whatnot.

    Read the article

  • Windows Server 2008 - inexplicable system time jumps/glitches/inaccuracies

    - by Nathan Ridley
    I'm running a production web server on Windows Server 2008. On this server I have a database which logs certain user actions, but every now and again I inexplicably get database entries which, according to the record ID and the records immediately before and after, have the wrong time logged against them (7 days+ too old). For example, record ID 1001 will be for Dec 7, 11pm, 1002 will be for Dec 7, 11:01pm, then 1003 will be for Nov 28, 1:38am, then the next will be back on track again. The problem seems to occur in random records (or 2-3 records in a row) and crops up once every few days. This is absolutely baffling because there is only one place in the application that assigns this date/time value and it's simply the system UTC date. I have been synchronizing the system time to time-a.nist.gov (which I read in another article was a bit more reliable than the default time.windows.com) and it seems to occasionally get out of time anyway (3-4 minutes), but I'm speculating that occasionally the time server has a temporary glitch where the date changes to a drastically wrong value for a short space of time, then changes back. Either that, or the motherboard clock battery is screwed and the reason the time momentarily changes is that the motherboard loses the time and then the time synchronization puts it back again. Could either of my suspicions be right? Should I turn off time synchronization for a production server? Assigning dates to an event log where the dates are up to 2 weeks prior to the actual date is a severe problem I can't have when the next version of my application is released. Any suggestions or advice would be appreciated.

    Read the article

  • Can't access WordPress blog after host changed IP address of server

    - by John
    My host changed servers and all websites now have a new IP address. I have the same domain name and I assume the host runs the same nameservers, though my host and domain name provider are different. Notes: I never entered a Name or description under General/Settings for my blog. I left them both blank. That is when I could log into it. The wp-config file, has localhost entered rather than a specific IP. Again this has always been the case and my host never advised otherwise. I can get into cPanel by simply putting the newly advised IP in front of /Cpanel. However, I can not reach the admin panel of my WordPress blog (version 2.8.2). I had been loggin into it via http://xx.xx.xxx.xx/~example/blog/wp-login.php. My host suggested to simply insert the new IP in place of the old one. I still get the error message: 404 Not Found The server can not find the requested page: Apache/2.0.63 (Unix) mod_ssl/2.0.63 OpenSSL/0.9.8e-fips-rhel5 mod_auth_passthrough/2.1 mod_bwlimited/1.4 FrontPage/5.0.2.2635 PHP/5.2.12 Server at 74.50.108.14 Port 80 I followed some tips on a question on Stack Overflow of a similar nature. I have logged into phpMyAdmin and found the wp-options table and searched for SELECT * FROM `wp_options` WHERE `option_name` IN ('siteurl', 'home') Only option ID 39 came up and the results are: Home has optionvalue http://example.org siteurl has optionvalue http://example.org/blog Both of which appear correct. Is there any part of the MySQL tables where I can change an actual IP address? Or is there something else you can advise?

    Read the article

  • Overscan in Catalyst Control Center

    - by alex
    I've connected my PC to my TV via HDMI (I've also tried using DVI). Whatever the resolution (anything from 800 x 600 to 1080p), the image displayed on the TV does not fill the entire screen surface; there's a black border on the edge of the image. This happens in both Vista and Windows 7. After a bit of searching I came to the conclusion it's got something to do with overscan done by the graphics card (ATI 3200HD). It's definitely not the TV because on my old PC there were no such problems. I've searched for the option in Catalyst Control Center 9.9 but it's not available for the TV; if I connect a normal LCD display, the option is there, but only for the LCD screen. If I choose Configure for my TV, where the overscan option should be, it takes me to the Welcome tab in CCC. How can I make the image fill the entire screen? How can I enable/disable overscan for my TV?

    Read the article

  • What is the correct way to move a file?

    - by Joe McDonald
    We had an issue at my work where I cut and pasted some files. Immediately when I did it, a ton of files were lost. I've been working in IT for 10+ years. I know how to cut and paste a file. Well, when it went up to my managers as to why the files were lost, they deemed it to my cut and paste that caused all the problems and asked why in the world someone as knowledgeable as me would ever cut and paste a file, and didn't I know that was totally the wrong way to move a file? The correct way to move a file is to drag the file. When cutting and pasting, it moves that 1+ GB file (on the server) to the clipboard (on my PC), which, obviously, will cause problems. Dragging a file never hits the clipboard. Be honest, I don't believe that for a minute. I believe when I cut and paste text, it goes to the clipboard. I've seen it in the old versions of windows. But when right clicking on 100+ files that equals 1+ GB, I can't believe that all that data is copied immediately out of whatever share I'm on at the server across my wireless on my laptop to my local clipboard to just go back to the server to another share. It seems they would build some logic in the server OS or my local OS (more likely my local OS) that would say when copying files, don't perform the move action until I click paste and if the files are staying local to where they were before, just move them. So, who's right?

    Read the article

  • Ways to recover data from external hard drive

    - by Howard Benson
    I use an external hard disk for backup of my mac with time machine (OS 10.5.8). I have made something wrong and I have found important folders in the recycler bin. These folders come from external hd. They are backup folders (backups.backupdb) and others. I have tried to restore them draggin and dropping. Some of them came back in the external hd in a while. For the others it takes hours to "preparing to copy" and then it has said "there's no space to copy" on ext hd. It's strange. Files are now in the recycle bin (180gb), and the ext had should have lot of free space. But it isn't really so. Ext hd is not free of space even if these files are in the bin. I ask for advices. I'm not also able to use time machine now (and i have "lost" old backups) for the same reason. Ext hd says that it has not free space.. Thanks

    Read the article

  • Self-connecting printers

    - by Martin Cerny
    Hello, I work as an administrator in a small company using XP Professional on all computers and two servers with Win 2003 Server. Recently a very unusual problam occured one of the computers keeps connecting to all the printers on the network it doesn't matter if it's an administrator or Domain User as soon as somebody logs in the commputer connects all the printers. The printers are either installed on local computers or on the server and shared. There is no log-on script connecting the printers, I install them manualy and none of the other computers shows such behaviour. We have a printer which is installed on two computers and both of them share it (I'm moving it to Server from a small PC which shared it up to now, but some computers still use the old connection), meaning this specific computer connects to one of the printer two times and it can't use either of the connections. How to prevent this self-connecting to all printers (none of the other computers has this problem). If I delte them from the "Printers" folder everything works fine untill I reconnect and the Folder is once again full of all the printers we have. I solved the smaller problem, computer is now capable of printing on all of the printers (it seems there have been some registry issues), after cleaning the registry and reinstalling the printer it seems to work just fine. But the second thing prevails, the computer connects to all the printers in the network (when I remove one/multiple it is reconnected right after the next log-in by any user).

    Read the article

  • How to set TV-out options under Linux of an Geforce 9600 GT video card

    - by polemon
    I'm using the TV-out connector of my Geforce 9600 GT to connect it to an old TV set. It's obviously in Composite mode, the other two cables of Component video are dead, only Pb/VIDEO labeled one gives me a signal. The picture appears black/white on the TV, I presume it's because the video card gives me an NTSC signal, but it's a PAL tv set. How do I change the TV-out from NTSC to PAL? My Component to SCART adapter hasn't arrived yet, but I think I should be able to set manually, whether the signal should be Composite or Component. How do I switch modes of the TV-out, between Component and Composite? I'm running Linux, so it's probably some settings I need to make in xorg.conf. Edit: I got this far: I need to set in the "Device" section of my xorg.conf: Option "TVStandard" "PAL-B" Option "TVOutFormat" "COMPOSITE" The whole section looks like this now: Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce 9600 GT" Option "AddARGBGLXVisuals" "True" Option "TVStandard" "PAL-B" Option "TVOutFormat" "COMPOSITE" EndSection How can I list all available settings for "TVStandard" and "TVOutFormat"?

    Read the article

  • Encrypted WiFi with no password?

    - by Ian Boyd
    Is there any standard that allows a WiFi connection to be encrypted, but not require a password? i know that (old, weak) WEP, and newer WPA/WPA2 require a password (i.e. shared secret). Meanwhile my own wireless connections are "open", and therefore unencrypted. There is no technical reason why i can't have an encrypted link that doesn't require the user to enter any password. Such technology exists today (see public key encryption and HTTPS). But does such a standard exist for WiFi? Note: i only want to protect communications, not limit internet access. i get the sense that no such standard exists (since i'm pretty capable with Google), but i'd like it confirmed. Claraification: i want to protect communcations, not limit internet access. That means users are not required to have a password (or its moral equivalent). This means users are not required: to know a password to know a passphrase to enter a CAPTCHA to draw a secret to have a key fob to know a PIN to use a pre-shared key have a pre-shared file to possess a certificate In other words: it has the same accessibility as before, but is now encrypted.

    Read the article

  • High latency due to non-presence of a transit provider in my country

    - by nixnotwin
    My ISP, a state owned incumbent, buys bandwidth from different transit providers. Whenever it buys transits it announces only a specific prefix (in most cases a hitherto unused) through the new transit AS. For e.g. if it runs out of bandwidth, it buys bandwidth from a new transit and announces a new prefix through it, while the same prefix is not announced (or announced with lowest metrics, so that the routes are very rarely used) via the old transits which continue to provide bandwidth to it. I am a business customer, so I have a fiber based link to the ISP and a tiny subnet is given to me. The subnet which is provide to me is part of a prefix which is announced by the AS of a transit who, it seems, do not have a presence in my country. So when I do a trace the packets, when they leave my ISP's AS, they take about 275ms to reach the transit providers core router, which is located in USA (half the world away). Also for upstream traffic my ISP uses a transit provider (tier 1) who has a presence in my country. But the return path is always through the transit which is in USA. So, average latency is 400ms. All the users of other ISPs in my country discover my subnet via USA. Even the traffic from neighboring countries, from Europe (which is much nearer) follows the path via USA. Sites using CDNs also resolve to ips in USA. I have informed the ISP NOC about the issue and I have asked them to provide an ip subnet belonging to a prefix announced by a local transit (preferably a tier 1 transit provider) and I am waiting for a reply. My question: Is it a serious issue that I must follow up to get it resolved? When I compared the latency on other providers in my country, it is, in most cases, less than half of my ISPs latency. Why my ISP doesn't announce all its prefixes to all of its transit providers, so that the packets can take efficient and nearest routes to reach prefixes that originate within its network?

    Read the article

< Previous Page | 378 379 380 381 382 383 384 385 386 387 388 389  | Next Page >