Search Results

Search found 15038 results on 602 pages for 'programming late night'.

Page 382/602 | < Previous Page | 378 379 380 381 382 383 384 385 386 387 388 389  | Next Page >

  • Cooling for a small server room

    - by John Zwinck
    I have a server room about 12 feet square with an unfinished ceiling (exposed ducts and wiring). It houses a few servers (about ten, 1U and 2U) and some networking gear (four 1U switches, three routers, three modems, two cable boxes). With the door closed, it runs around 80 degrees Fahrenheit with half the servers turned on. When I turned on all the servers it reached 86 before I chickened out and propped the door open. The room is adjacent to air-conditioned office space, but does not itself have dedicated air conditioning. The ventilation for this room seems to be limited to one duct coming in at ceiling level, with a powered fan to draw air in, and one duct at ceiling level to allow air to flow out (it seems like it may just go into the drop ceiling cavity in the adjacent room). The adjacent office space stays fairly cool, but I'd prefer not to leave the door propped open all the time. There is both 110v and 208v service in the room, and plenty of power available. But there are no windows, and no floor drains (in a pinch we might be able to run a condensation hose through a small hole we'd drill in the wall to a nearby sink area, but only if absolutely necessary). I've considered portable A/C units, but I'm not sure on sizing and a lot less sure how we would run the exhaust hose(s). I suppose we could point one at the existing room exhaust duct (air return), but substantially modifying the duct is probably a no-no. I've also considered installing a fan box in the door of the room, but I'm concerned that this will only drop the temperature a little. Even right now, with all the equipment on, the room is at 83 degrees with the door open. And the main building A/C turns off daily at 6 PM to conserve energy, so the adjacent room temperature rises at night. How would you cool this room? Let's say the goal is to bring the temperature with everything running from a steady state of around 90 degrees down to 75 (equivalently, to offset the heat produced by ten 1U servers).

    Read the article

  • Difference between Property and Method

    - by Asim Sajjad
    Which one is better to use when it come to return value for example public int EmployeeAge { get{return intEmployeeAge}; } And public int EmployeeAge() { return intEmployeeAge; } Which one is better and why? And what is best programming practice to use when we have secnario like above ?

    Read the article

  • Can't connect to public WiFi with MacBookPro at coffee shops and libraries

    - by Nathan Bowers
    The Problem: I can't connect to public, unencrypted WiFi at my local public library or Peets Coffee. My Setup: Late 2006 MacBookPro running 10.5.8. I have Parallels installed. It's supposed to work like this: 1) Connect to their unencrypted WiFi network 2) Open a browser which redirects you to their "enter password/agree to terms" page. 3) Browse normally. I can connect to the WiFi network, but when I try to authenticate I always get stuck in a redirect loop. It's been like this for a while. Even before I upgraded to 10.5.8. I never have trouble with encrypted networks or regular open WiFi. What I've tried: Disabling Parallels connections in Network Prefs. Superstition: somehow Parallels installed something in the network stack that's messing me up. Pinging the IP address of the WiFi node I'm connected to. I can ping it, it's there, but I still get stuck in this authentication redirect loop. Tried different browsers, tried different cookie and security settings. Even tried IE under Parallels. No dice. Tried flushing DNS cache. Asked library and coffee employees for help. It didn't go well. My Question: Anybody else have this problem? What should I be looking for?

    Read the article

  • Html / Email / Distribution list problem from a noob

    - by Hezeus
    I need to create a feature for a website that will allow a user to enter their email in order to receive a free promotion (which will be emailed immediately) and be added to an announcement list. I haven't done any web programming and am wondering where I should start? Should I just create a database and everytime an email is entered, add the email to the database, then when I want to send out an announcement just write a script that will send an email to every address? Thanks!

    Read the article

  • Lenvo B450 won't boot on battery only?

    - by Mywiki Witwiki
    We bought a Lenovo B450 laptop almost a year ago. It comes with a NVIDIA GEFORCE with CUDA graphics and so the battery life is terrible. It will only last 1:30 hours max. We try to run it on battery as much as possible but because the battery life is short sometimes we can't notice that the battery is so low until the computer blacks out. Because of the short battery life, the laptop is always plugged on AC power. One night the computer froze. Because it was already late, I just reset the laptop my pressing the power button for 10 seconds. The laptop shut off but I did not bother restarting it. The next morning, the laptop won't turn on on battery only. It will only turn on on AC power. The computer instantly shuts down(improperly) once the adapter is removed. But the battery was at 100% then. Now it is slowly losing charge (currently at 74%). The battery indicator says, "Plugged in, not charging". I want to bring the laptop to school but I can't because it won't be portable at all. Just to summarize it all: 1) The laptop suffered some blackouts already. 2) The laptop was on AC power most of the time. 3) When the computer froze, it was reset (hard shutdown). 4) The laptop won't boot with battery only since then. 5) The laptop will shutdown instantly when AC adapter is removed. 6) The battery won't charge and is gradually losing charge. ======================= UPDATE ============================= We got the battery replaced. Unfortunately, it delivers only 2 hours max of power.

    Read the article

  • how can we find that this processor supports how much memory?????

    - by Zia ur Rahman
    I have just started the Assembly language programming and in the first lecture our teacher told us about intel 8080 and intel 8085 and he said there was 64k memory with these processor. Now i want to know that how we find this amount of memory with specific processor, for example i have a processor 1.8 Ghz , now how i can find out the amount of memory that can be used with this processor. what i am trying to ask is tell me the method how we can find out this amount of memory?

    Read the article

  • Synergy, OSX client, Windows 7 server - No mouse on client

    - by Majenko
    I have the following Synergy setup: +------------++------------++------------++------------+ | Mac || Win 7 || Ubuntu 1 || Ubuntu 2 | |c ||s ||c ||c | +------------++------------++------------++------------+ Mac: OS/X Tiger 10.4.11 (G3) Win 7: Windows 7 Ultimate x64 Ubuntu 1 & Ubuntu 2: Desktop 10.10 Now, everything works nicely between the Win7 server and the two Ubuntu machines. What doesn't work is the Mac. I am running the very latest Synergy (1.4.2, downloaded last night). As far as the Mac is concerned everything should be working fine: Synergy 1.4.2 Client on Darwin 8.11.0 Darwin Kernel Version 8.11.0: Wed Oct 10 18:26:00 PDT 2007; root:xnu-792.24.17~1/RELEASE_PPC Power Macintosh Unable to connect to pasteboard. Clipboard sharing disabled. 2011-03-22 09:32:56.725 synergyc[406] Can't register screen saver connection 'com.apple.ScreenSaverDaemon' started client connecting to '192.168.0.202': 192.168.0.202:24800 connected to server entering screen leaving screen entering screen leaving screen But it's just not interacting with the display at all (mouse doesn't move, keyboard does nothing). I have tried running ktrace on synergyc and examining the dump, and the only clue I found was that it was trying to interact with the AccessibilityAPI which was disabled at first. Enabling Accessibility has had no effect whatsoever (it has only stopped the failure to open /var/db/.AccessibilityAPIEnabled in the ktrace dump) Anyone managed to get this to work in OS/X Tiger yet? I used to run the server on OS/X and have the windows / unix machines as clients, but as my Windows is now a laptop I'd like that to be the server.

    Read the article

  • Really "wow" them in the interview

    - by Juliet
    Let me put it to you this way: I'm a top-notch programmer, but a notoriously bad interviewee. I've flunked 3 interviews consecutively because I get so nervous that my voice tightens at least 2 octaves higher and I start visibly shaking -- mind you, I can handle whatever technical questions the interviewer throws at me in that state, but I think it looks bad to come off as a quivering, squeaky-voiced young woman during a job interview. I've just got the personality type of a shy computer programmer. No matter how technical I am, I'm going to get passed up in favor of a smooth talker. I have another interview coming up shortly, and I want to really impress the company. Here are my trouble spots: What can I do to be less nervous during my interview? I always get really excited when I hear I have a face-to-face interview, but get more and more anxious as D-Day the interview approaches. My employers wants me to explain what I used to do at my prior employment. I'm a very chatty person and tend to talk/squeak for 10 minutes at a time. How long or short should I time my answers? On that note, when I'm explaining what I did at prior jobs, what exactly is my interviewer looking for? At some point, my interviewer will ask "do you have any questions for me while you're here?" I should, but what kinds of questions should I ask to show that I'm interested in being employed? My interviewer always asks why I'm looking for a new job. The real reason is that my present salary is $27K/yr [Edit to add: and I've yet to get a raise since I started], and I want to make more money -- otherwise the work environment is fine. How do I sugarcoat "I want to make more money" into something that sounds nicer? I have only one prior programmer job, and I've worked there for 18 months, but I have the skill of someone with 4 to 6 years of experience. What can I say to compete against applicants with more work experience? I took a low-paying $27K/yr programming job just to get my foot in IT, and I've been trying to leverage that job as a stepping stone to better opportunities. I get interviews because I consistently out-score senior-level developers in aptitude tests, and my desired salary range is right in the ballpark of what most companies want to offer. Unfortunately, while I've been a programming as a hobby for 10 years and I'm geared to graduate with my BA in Comp Sci in May '09, employers see me as a junior-level programmer with no degree. I want to prove them wrong and get a job that matches my skill level. I'd appreciate any advice anyone has to offer, especially if they can help me get a better job in the process.

    Read the article

  • Howto start writing iPad applications?

    - by Lothar
    I know Objective-C from Desktop Apple Programming. But i want to jump on the iPad bandwagon and start developing some small edutainment applets. Is the iPad API the same as iPhone just with more power? Do i need to join the iPhone developer program and does it still start with $100. Is there any iPad emulator yet?

    Read the article

  • When to use Python special methods?

    - by bodacydo
    I know that classes can implement various special methods, such as __iter__, __setitem__, __len__, __setattr__, and many others. But when should I use them? Can anyone describe typical scenarios when I would want to implement them and they would simplify programming in Python? Thanks, Boda Cydo.

    Read the article

  • How to get HDD volume id programmatically?

    - by Leandro
    Hi, everybody. I`m programming in obj-c using cocoa, and I would like to discover the HDD volume id programmatically.I know that I will probably need to do this in pure C and than use it in my app, but even in the C language I could not find any answers. Please help.Thanks!

    Read the article

  • Finding cause of TCP retransmission within a LAN

    - by Surreal
    Hello denizens of Server Fault I have an irritating problem with a LAN of about 100 computers, 2 Windows domain servers, and 12 VoIP phones. Since their installation around a year ago, every week or so, we notice a VoIP phone resetting itself - occasionally in the middle of a call. Simultaneously there are often signs of temporary loss of connection on computers: freezes in explorer while accessing network shares, errors in our administration software due to loss of connection to the database server. I have been doing some Wireshark monitoring on the connection between the VoIP PBX and the rest of the network. Wireshark picks up a clump of retransmitted TCP packets at the times when we record phone restarts. The Wireshark log shows about 2 clusters of retransmissions a day ranging from 5 packets to hundreds. Those in each cluster are mainly between the PBX and some set of the VoIP phones, but not always the same set. Often retransmissions at the same time are to phones connected to the same switch, but sometimes retransmissions occur together to phones at opposite ends of the network. There are usually some coincident retransmissions in passing TCP traffic, for example between client machines and the file servers. The spikes in retransmissions and phone resets do not correlate well with when the network is heavily loaded. They seem to occur slightly more during the day, but most in the evening, when traffic should be decreasing. They occur reasonably often late at night when most computers are turned off and traffic should be lowest. Do you have any ideas that might help diagnose the cause of problems like this? One thing I have not yet tried, but should have, is updating the firmware of all the switches.

    Read the article

  • ProCurve 1800 switch issue

    - by user98651
    I recently deployed ProCurve 1800-24G switches in place of some older ProCurve 2424M switches in my network. However, I'm having a serious problem with the switch connected to the router. It seems, every night when our Windows 2008 R2 server (off site) runs a backup to a iSCSI target (on site) [facilitated through a PPTP tunnel] the LAN loses connectivity with the router. To clarify, there is only one router which is connected to the switch affected by this problem. The only way to resolve the issue is to either reboot the router or pull the ethernet cable that goes to the router and plug it back in. During the outage, clients cannot receive DHCP requests, DNS requests, ping, or do anything else with the router in this state. Now, neither the switch or router are configured extensively and the issue only seems to have surfaced with the new switch in place. I have tried a number of things including replacing cables, rebooting and checking the switch configuration (it is literally as basic as you can get at this point-- flat LAN, no trunking). Interestingly, the router shows (accessed externally) no changes in configuration or status during this state but similarly cannot ping or access other hosts on the network. This issue occurs in different stages of backup (ie, different amounts transferred). I've also dumped packets from the switch into WireShark but cannot seem to find any anomaly yet (I'm looking at packets around the time the issue appeared and at the time when I reset the NIC). Any suggestions for what to look for? Ideas on what could be causing this? I'm seeing some transmit/receive errors on the NIC from both the router and switch side but nothing serious when compared to the total packet counts. I'm seriously doubting hardware at this point, as I have tried another switch, different cables, and a different NIC on the router.

    Read the article

  • Whats the point of STL?

    - by Jonathan D
    I've been programming c++ for about a year now and when i'm looking about i see lots of references to STL. Can some one please tell me what it does? and the advantages and disadvantageous of it? thanks

    Read the article

  • Google and Mirror Websites

    - by Roberto Aloi
    Which is the best way to manage a website with one or more mirrors so that: Google don't consider it as "dupicated content" The website is correctly indexed No inconsistencies or duplicated information are present in Google Analytics The Google webmaster guidelines in general are respected NOTE: I'm not sure if I should ask this question here or in ServerFault. It looks a bit in the middle between programming and server administration. Let me know if you think ServerFault represent a more appropriate place for this and I'll move it. Thanks.

    Read the article

  • OpenFileDialog directing to a file 2 directories back

    - by steve
    I'm having problems in visual basic programming. Currently I open a file using an open file dialog window and navigating to a file to open it. I want to be able to write a simple line saying ( and this is the best way I can describe it), Open this file "....\users.text". Please can someone help?

    Read the article

  • Tips for transitioning from Visual Basic to Xcode

    - by Cyclone
    I've been programming in VB.net for a while now, and I finally got access to a mac to make ipod apps. What are some useful sites, videos, etc. that could help me get used to Objective C and the Xcode IDE? I've stumbled upon the samples on the apple dev site, but none of them really give good examples which I could learn the syntax of the language from. Thanks for the help, Objective C is really a big change from VB.net!

    Read the article

  • where can I find the diff algorithm?

    - by dole doug
    Does anyone know where can i find an explanation and implementation of the diff algorithm. First of all i have to recognize that i'm not sure if this is the correct name of the algorithm. For example, how Stackoverflow marks the differences between two edits of the same question? ps: I know C and PHP programming languages. ty

    Read the article

  • Are there some newer books to read beside these?

    - by Gandalf StormCrow
    I've come accross these websites who recommend certain books but they are pretty much old : http://www.joelonsoftware.com/navLinks/fog0000000262.html http://www.codinghorror.com/blog/2004/02/recommended-reading-for-developers.html http://sites.google.com/site/steveyegge2/ten-great-books Are there books in recent years which every developer should read?I'm mostly interested about Java/Spring/Hibernate/Jboss although reading book about programming in general wouldn't be bad.

    Read the article

  • OOP vs PP for algorithms

    - by Ilian
    Which paradigm is better for design and analysis of algorithms? Which is faster? Because I have a subject called Design and Analysis of Algorithms in university and have a time limit for programs. Is OOP slower than Procedure programming? Or the time difference is not big?

    Read the article

< Previous Page | 378 379 380 381 382 383 384 385 386 387 388 389  | Next Page >