Search Results

Search found 27649 results on 1106 pages for 'ask how to geek'.

Page 383/1106 | < Previous Page | 379 380 381 382 383 384 385 386 387 388 389 390  | Next Page >

• configuring USB modem( Huawei EC156) in ubuntu 13.10

  - by user205427

  I am facing difficulty in installing my USB modem in Ubuntu 13.10. Contrary to what many have suggested,it does not get detected automatically, nor does setting a new connection help. USB Device is listed in lsusb, but not under network manager or Devices, it is detected as a CD-ROM, what I understood from the web was that usb-modeswitch can be used to switch it to a USB device. Even 'Enable Mobile Broadband' option is not shown in network manager. What was interesting is when I start laptop with windows 7 and use the USB modem and after that restart with Ubuntu, both Enable Broadband and the mobile broadband connection can be seen. Sadly, internet connection could not be installed. I tried using USB-modeswitch command as suggested somewhere, but it does not seem to work. Following is the message. Take all parameters from the command line * usb_modeswitch: handle USB devices with multiple modes * Version 2.0.1 (C) Josua Dietze 2013 * Based on libusb1/libusbx ! PLEASE REPORT NEW CONFIGURATIONS ! DefaultVendor= 0x12d1 DefaultProduct= 0x1505 HuaweiMode=1 NeedResponse=0 InquireDevice enabled (default) Look for default devices ... found USB ID 8087:0020 found USB ID 1d6b:0002 found USB ID 0461:4db6 found USB ID 12d1:1505 vendor ID matched product ID matched found USB ID 138a:0007 found USB ID 03f0:231d found USB ID 8087:0020 found USB ID 1d6b:0002 Found devices in default mode (1) Access device 005 on bus 001 Get the current device configuration ... OK, got current device configuration (1) Use interface number 0 Use endpoints 0x08 (out) and 0x87 (in) Inquire device details; driver will be detached ... Looking for active driver ... OK, driver detached INQUIRY message failed (error -9) USB description data (for identification) ------------------------- Manufacturer: HUA?WEI TECHNOLOGIES Product: HUAWEI Mobile Serial No.: ??????????????????? ------------------------- Send old Huawei control message ... -> Run lsusb to note any changes. Bye! I am stuck with this problem for 4 days now, any help would be appreciated

  Read the article

• Lost the config of my monitor once I connected it to a KVM switch.

  - by jfmessier

  I used to have a monitor (Acer 20", AL2017) connected to the external video port of my laptop. Everything was great and I could get a rather high resolution available when setting it under Ubuntu (all versions). But since I connected it to a KVM, the monitor is no more recognized, and I cannot go beyond 1024x768. My video adapter is an Intel chipset 9xx from an older Pentium Core 2 Duo laptop. The same monitor, using another video chipset (Intel 82G33/G31 rev 02) is properly detected through the switch box. Looks to me like the video chipset is not the best, and I can live with this. I see that I have no xorg.conf, and I understand that I would need to generate one so I can then use it to force the available modes on the X system. How can I generate the xorg.conf file for my Intel video chip, so I can use it then ? Merci :-)

  Read the article

• no sudo permissions to /etc/hostname

  - by Pagis

  When I try to edit my /etc/hostname file, using sudo nano /etc/hostname (or any other editor) I get the following: Error writing /etc/hostname: Permission denied I then tried: sudo chmod u+w ./hostname And got the error: chmod: changing permissions of `./hostname': Operation not permitted I get the same error trying to add write permissions to any use or group. This is what ls shows: -rw-r--r-- 1 root root 22 2012-06-18 12:25 /etc/hostname Any idea why and what can I do about it? I'm running Ubuntu 11.10.

  Read the article

• Unable to mount hard disk

  - by user101522

  I am unable to mount hard disk and got this message: Unable to mount 158 GB Filesystem Error mounting: mount: wrong fs type, bad option, bad superblock on /dev/sda1, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so From the terminal, I tried syslog - try: No command 'syslog' found, did you mean: Command 'dsyslog' from package 'dsyslog' (universe) Command 'syslogd' from package 'sysklogd' (universe) Command 'syslogd' from package 'inetutils-syslogd' (universe) Command 'syslogd' from package 'busybox-syslogd' (universe) syslog: command not found Also tried dmesg | tail: [ 971.390588] sd 0:0:0:0: [sda] CDB: Read(10): 28 00 12 62 30 80 00 00 40 00 [ 971.390600] end_request: I/O error, dev sda, sector 308424832 [ 971.390605] Read-error on swap-device (8:0:308424840) [ 971.390608] Read-error on swap-device (8:0:308424848) [ 971.390617] Read-error on swap-device (8:0:308424856) [ 971.390620] Read-error on swap-device (8:0:308424864) [ 971.390623] Read-error on swap-device (8:0:308424872) [ 971.390626] Read-error on swap-device (8:0:308424880) [ 971.390629] Read-error on swap-device (8:0:308424888) [ 971.390632] Read-error on swap-device (8:0:308424896) It was fine before I tried to re-install 12.04 from the live CD (which failed due to the disk problem).

  Read the article

• Why does my CD Tray keep popping open?

  - by Anton

  I have Ubuntu server - Ubuntu 10.04.3 LTS and I can't figure out why my CD tray is opening all the time. I have looked into /var/log/auth.log, cron list and found nothing. The eject command closes tray and then it gets opened again. The server has a LAMP (Linux-Apache-MySQL-PHP) setup and I can't afford to restart it now. How can I find out who or which program is popping the tray open? Which programs can cause this behavior?

  Read the article

• Problem in Kubuntu: Default browser never opens

  - by user170852

  I'm using Kubuntu, and I switched the default browser to my favourite one. The thing is, when I did this, both my Twitter clients stopped working. Now each and every Twitter client I download and install fails to open any web browser to finish my account authorization. It's impossible they're all broken, so I reset my default browser to rekonq and it works well as a default browser, but still can't login to twitter from any client. In fact, every button in every program that should open a browser window (like Amarok with the "like on last.fm" button) does nothing. So I think there may be a problem with my system but I can't figure out what is it. My user is not in the admin group (it's a shared user), I have an admin user but I only use it to install programs. Could that be the cause? Also, hitting alt+F2 and writing man:file (enter) opens a rekonq window normally.

  Read the article

• cant connect to internet directly on ubuntu

  - by shubham

  I have dual booted machine windows 7 with ubuntu 12.10. I dont have direct internet access in ubuntu on wired network although direct connection works in windows7. I have to connect through a proxy on ubuntu, which works fine. This is not a ubuntu version related problem as i have been getting it from ubuntu 11.04. I want to know what difference is there in ubuntu and windows 7 which creates such results and how to fix it?

  Read the article

• Cant install 12.04.1 or 12.10 in Asus GT75VW laptop

  - by Software companies in perth

  I got this new laptop that comes with a 256 GB ssd drive 128 GB are used for the preinstalled Windows 7 I want to install Ubuntu on the other 128 Gb. I first installed 12.10, it worked and booted once into the OS bu then it started booting onto a black screen so i tried with 12.04.1, i tried installing it a few times with the normal and alternate installer but after saying the installation was OK, it boots onto this distorted graphics screen with a purpelish background where you can't do anything.... What do i do?

  Read the article

• Unable to connect to Wireless after installing Ubuntu 12.10

  - by Moulik

  I am using Asus U56E laptop and after installing Ubuntu 12.10 alongside Windows 8, I am unable to connect to the Wireless. I have been trying to solve this problem since two weeks and couldn't solve it. Please help. Any answer would be appreciated. Here are some command-line results. lspci -v | grep -iA 7 network ubuntu@ubuntu:~$ lspci -v | grep -iA 7 network 02:00.0 Network controller: Intel Corporation Centrino Wireless-N + WiMAX 6150 (rev 67) Subsystem: Intel Corporation Centrino Wireless-N + WiMAX 6150 BGN Flags: bus master, fast devsel, latency 0, IRQ 52 Memory at de800000 (64-bit, non-prefetchable) [size=8K] Capabilities: <access denied> Kernel driver in use: iwlwifi Kernel modules: iwlwifi lsmod | grep iwlwifi ubuntu@ubuntu:~$ lsmod | grep iwlwifi iwlwifi 386826 0 mac80211 539908 1 iwlwifi cfg80211 206566 2 iwlwifi,mac80211 ubuntu@ubuntu:~$ dmesg | grep iwlwifi [ 57.846261] iwlwifi: Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree: [ 57.846264] iwlwifi: Copyright(c) 2003-2012 Intel Corporation [ 57.846336] iwlwifi 0000:02:00.0: >pci_resource_len = 0x00002000 [ 57.846338] iwlwifi 0000:02:00.0: >pci_resource_base = ffffc90000c7c000 [ 57.846341] iwlwifi 0000:02:00.0: >HW Revision ID = 0x67 [ 57.846438] iwlwifi 0000:02:00.0: >irq 52 for MSI/MSI-X [ 59.558335] iwlwifi 0000:02:00.0: >loaded firmware version 41.28.5.1 build 33926 [ 59.558514] iwlwifi 0000:02:00.0: >CONFIG_IWLWIFI_DEBUG disabled [ 59.558516] iwlwifi 0000:02:00.0: >CONFIG_IWLWIFI_DEBUGFS enabled [ 59.558517] iwlwifi 0000:02:00.0: >CONFIG_IWLWIFI_DEVICE_TRACING enabled [ 59.558519] iwlwifi 0000:02:00.0: >CONFIG_IWLWIFI_DEVICE_TESTMODE enabled [ 59.558520] iwlwifi 0000:02:00.0: >CONFIG_IWLWIFI_P2P disabled [ 59.558522] iwlwifi 0000:02:00.0: >Detected Intel(R) Centrino(R) Wireless-N + WiMAX 6150 BGN, REV=0x84 [ 59.558583] iwlwifi 0000:02:00.0: >L1 Disabled; Enabling L0S [ 59.569083] iwlwifi 0000:02:00.0: >device EEPROM VER=0x557, CALIB=0x6 [ 59.569085] iwlwifi 0000:02:00.0: >Device SKU: 0x150 [ 59.569087] iwlwifi 0000:02:00.0: >Valid Tx ant: 0x1, Valid Rx ant: 0x3 [ 59.569100] iwlwifi 0000:02:00.0: >Tunable channels: 13 802.11bg, 0 802.11a channels [ 70.208469] iwlwifi 0000:02:00.0: >L1 Disabled; Enabling L0S [ 70.208648] iwlwifi 0000:02:00.0: >Radio type=0x1-0x2-0x0 [ 70.366319] iwlwifi 0000:02:00.0: >L1 Disabled; Enabling L0S [ 70.366470] iwlwifi 0000:02:00.0: >Radio type=0x1-0x2-0x0 sudo lshw -c network ubuntu@ubuntu:~$ sudo lshw -c network *-network description: Wireless interface product: Centrino Wireless-N + WiMAX 6150 vendor: Intel Corporation physical id: 0 bus info: pci@0000:02:00.0 logical name: wlan0 version: 67 serial: 40:25:c2:84:99:c4 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=iwlwifi driverversion=3.5.0-17-generic firmware=41.28.5.1 build 33926 latency=0 link=no multicast=yes wireless=IEEE 802.11bgn resources: irq:52 memory:de800000-de801fff *-network description: Ethernet interface product: AR8151 v2.0 Gigabit Ethernet vendor: Atheros Communications Inc. physical id: 0 bus info: pci@0000:04:00.0 logical name: eth0 version: c0 serial: 54:04:a6:2b:6a:ef capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress vpd bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=atl1c driverversion=1.0.1.0-NAPI latency=0 link=no multicast=yes port=twisted pair resources: irq:54 memory:dd400000-dd43ffff ioport:a000(size=128) ifconfig ubuntu@ubuntu:~$ ifconfig eth0 Link encap:Ethernet HWaddr 54:04:a6:2b:6a:ef UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:176 errors:0 dropped:0 overruns:0 frame:0 TX packets:176 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:14368 (14.3 KB) TX bytes:14368 (14.3 KB) wlan0 Link encap:Ethernet HWaddr 40:25:c2:84:99:c4 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) iwconfig ubuntu@ubuntu:~$ iwconfig eth0 no wireless extensions. lo no wireless extensions. wlan0 IEEE 802.11bgn ESSID:off/any Mode:Managed Access Point: Not-Associated Tx-Power=15 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off iwlist scan ubuntu@ubuntu:~$ iwlist scan eth0 Interface doesn't support scanning. lo Interface doesn't support scanning. wlan0 No scan results nm-tool ubuntu@ubuntu:~$ nm-tool NetworkManager Tool State: disconnected - Device: eth0 ----------------------------------------------------------------- Type: Wired Driver: atl1c State: unavailable Default: no HW Address: 54:04:A6:2B:6A:EF Capabilities: Carrier Detect: yes Wired Properties Carrier: off - Device: wlan0 ---------------------------------------------------------------- Type: 802.11 WiFi Driver: iwlwifi State: disconnected Default: no HW Address: 40:25:C2:84:99:C4 Capabilities: Wireless Properties WEP Encryption: yes WPA Encryption: yes WPA2 Encryption: yes Wireless Access Points hypeness2: Infra, 00:21:29:DA:08:4F, Freq 2462 MHz, Rate 54 Mb/s, Strength 42 WPA love: Infra, 68:7F:74:17:02:66, Freq 2412 MHz, Rate 54 Mb/s, Strength 19 WPA WPA2 DIRECT-MwSCX-3400Pamela: Infra, 02:15:99:A3:3F:AC, Freq 2412 MHz, Rate 54 Mb/s, Strength 22 WPA2 router: Infra, 1C:AF:F7:D6:76:F3, Freq 2417 MHz, Rate 54 Mb/s, Strength 20 WPA2 wing: Infra, E8:40:F2:34:E4:F7, Freq 2437 MHz, Rate 54 Mb/s, Strength 20 WPA WPA2 132LINKSYS: Infra, 00:1A:70:80:1F:E9, Freq 2437 MHz, Rate 54 Mb/s, Strength 57 WEP VMITTAL: Infra, E0:46:9A:3C:F0:C4, Freq 2412 MHz, Rate 54 Mb/s, Strength 27 WEP HP-Print-10-LaserJet 1025: Infra, 7C:E9:D3:7E:F8:10, Freq 2437 MHz, Rate 54 Mb/s, Strength 59 ACNBB: Infra, 00:26:75:22:A6:2F, Freq 2437 MHz, Rate 54 Mb/s, Strength 20 SATKAIVAL: Infra, 00:18:E7:CE:69:A6, Freq 2412 MHz, Rate 54 Mb/s, Strength 69 WPA WPA2 hypeness: Infra, B8:E6:25:24:C3:B1, Freq 2437 MHz, Rate 54 Mb/s, Strength 54 WPA WPA2 CSNetwork: Infra, BC:14:01:58:C5:88, Freq 2437 MHz, Rate 54 Mb/s, Strength 25 WPA WPA2 tharma: Infra, BC:14:01:E2:06:18, Freq 2412 MHz, Rate 54 Mb/s, Strength 15 WPA WPA2 Active2.4: Infra, 10:6F:3F:0E:F3:8E, Freq 2462 MHz, Rate 54 Mb/s, Strength 17 WPA WPA2 ACNBB: Infra, 00:26:75:58:4E:7A, Freq 2437 MHz, Rate 54 Mb/s, Strength 85 KO: Infra, BC:14:01:2E:AF:A8, Freq 2452 MHz, Rate 54 Mb/s, Strength 22 WPA WPA2 FEAR: Infra, 00:18:4D:C0:BC:58, Freq 2462 MHz, Rate 54 Mb/s, Strength 17 WPA Pamela: Infra, BC:14:01:52:F6:F8, Freq 2412 MHz, Rate 54 Mb/s, Strength 24 WPA WPA2 bvrk2: Infra, 78:CD:8E:7B:3C:79, Freq 2457 MHz, Rate 54 Mb/s, Strength 19 WPA WPA2 BELL030: Infra, D8:6C:E9:17:AF:09, Freq 2462 MHz, Rate 54 Mb/s, Strength 22 WPA2 Desai: Infra, 00:1D:7E:52:FB:C5, Freq 2437 MHz, Rate 54 Mb/s, Strength 14 WEP Sritharan: Infra, BC:14:01:E5:59:78, Freq 2462 MHz, Rate 54 Mb/s, Strength 19 WPA WPA2 PFN: Infra, 00:13:10:8B:CF:45, Freq 2437 MHz, Rate 54 Mb/s, Strength 19 WEP rfkill list all ubuntu@ubuntu:~$ rfkill list all 0: asus-wlan: Wireless LAN Soft blocked: no Hard blocked: no 1: asus-wimax: WiMAX Soft blocked: yes Hard blocked: no 2: phy0: Wireless LAN Soft blocked: no Hard blocked: no so these are some more results sudo modprobe -r iwlwifi ubuntu@ubuntu:~$ sudo modprobe -r iwlwifi sudo modprobe iwlwifi 11n_disable=1 ubuntu@ubuntu:~$ sudo modprobe iwlwifi 11n_disable=1 echo "blacklist asus_wmi" | sudo tee -a /etcmodprobe.d/blacklist.conf ubuntu@ubuntu:~$ echo "blacklist asus_wmi" | sudo tee -a /etc/modprobe.d/blacklist.conf blacklist asus_wmi echo "options iwlwifi 11n_disable=1" | sudo tee /etc/modprobe.d/iwlwifi.conf ubuntu@ubuntu:~$ echo "options iwlwifi 11n_disable=1" | sudo tee /etc/modprobe.d/iwlwifi.conf options iwlwifi 11n_disable=1 sudo modprobe -rfv iwlwifi ubuntu@ubuntu:~$ sudo modprobe -rfv iwlwifi rmmod /lib/modules/3.5.0-17-generic/kernel/drivers/net/wireless/iwlwifi/iwlwifi.ko rmmod /lib/modules/3.5.0-17-generic/kernel/net/mac80211/mac80211.ko rmmod /lib/modules/3.5.0-17-generic/kernel/net/wireless/cfg80211.ko sudo modprobe -v iwlwifi ubuntu@ubuntu:~$ sudo modprobe -v iwlwifi insmod /lib/modules/3.5.0-17-generic/kernel/net/wireless/cfg80211.ko insmod /lib/modules/3.5.0-17-generic/kernel/net/mac80211/mac80211.ko insmod /lib/modules/3.5.0-17-generic/kernel/drivers/net/wireless/iwlwifi/iwlwifi.ko 11n_disable=1

  Read the article

• menubar visible pipelight on secondray screen

  - by Adrien

  First of all, here is my setup : Ubuntu 13.04 on a laptop, main display is the laptop screen, secondary display is my tv Chrome Pipelight (microsoft silverlight running through wine) a silverlight application in the secondary display(netflix) The problem is that, when i put netflix in fullscreen mode, the menubar remains visible on top of the secondary screen. Apparently the aplication that has focus is Microsoft Silverlight. What can I do to solve this?

  Read the article

• Upgrade from Linux Mint 12 to Kubuntu 12.04?

  - by MountainX

  Is there an "easy" way to "upgrade" my existing Linux Mint 12 install to Kubuntu 12.04 beta 2? I know I could reinstall. Usually I would do a clean install to avoid unexpected issues. But in this case, I don't have time to reconfigure everything from my printers to my installed software, so I am looking for the quick/easy way, but I also want to avoid big risks of an upgrade gone wrong. I'm hoping to just change some repos and run a few commands from the terminal. I don't mind editing a few config files as long as I can find good HOWTOs. But I don't want to be the pioneer (arrows in back). I'm hoping someone has done this before and has a set of steps. For context, I recently installed KDE 4.8 SC onto Kubuntu 11.10 using PPAs. This was on another computer. That wasn't a problem. But I decided to do a fresh install of Kubuntu 12.04 later. I like it well enough that I want to change my other computer from Linux Mint 12 to Kubuntu. (I'm going all-in with KDE. It's now my desktop of choice.) This Linux Mint upgrade will be a move from Gnome and MGSE to KDE, so that will probably complicate things at bit compared to something like upgrading Kubuntu 11.10 to KDE 4.8. References: http://www.psychocats.net/ubuntu/kde Is it safe to install Kubuntu-desktop in 11.10?

  Read the article

• GRUB 2 Error : No such disk

  - by Chandra Sekhar

  I have gone through many pains to boot through my windows 7 partition. I had windows 7, then one fine day I installed Ubuntu and again formatted the partition where Ubuntu was installed only to find the my Windows does not boot(Probably corrupted MBR). I again installed Ubuntu later but the Grub could not detect windows. So I manually added windows by editing the file 40_custom. But when I select the win7 entry in the grub, it displays the error : no such disk. What do I do?? Additional Info : Ubuntu version : 11.10 x64|| Win 7 Home premium, 64 bit|| While in the process of debugging I once also came across the error : Sector 32 being in use by FlexNet.|| Strongly in need of booting my Win 7 without any formats or fresh OS installations. Thankful for any Diagnostics and Solutions to my problem.

  Read the article

• LTS 12.04.1 will not resolve domain.local websites

  - by user108502

  I have done a brand new installation of the Ubuntu server (v12.10) with bind configured to have a dns zone of gdos.local and apache configured for said domain. With a brand new installation of Ubuntu desktop LTS I try to connect to www.gdos.local and all I get is: Server not found Firefox can't find the server at www.gdos.local. Check the address for typing errors such as ww.example.com instead of www.example.com However if I change the domain to gdos.tmp and type in www.gdos.tmp, I get the internal website. If I change it to mybusiness.local , I get the same error message. If I use a Microsoft os, this works fine, all three domains resolve to a webpage. I have searched the internet flat for the past week on dns issues but have not come up with a solution. I have followed instructions from removing dnsmasq to editing like resolv.conf (in some very strange places) and I still have no joy on getting the .local domain extension to work. I can safely say the issue is not with the server but with the desktops because if the issue was server related the Microsoft OS's would not resolve it either. I have done several installs of the desktop in an effort to make sure that I did not break anything while trying to fix this. Please can anyone point to a workable solution for fixing the .local domain extension. Thank you Mark Hollander

  Read the article

• Huwaei Modem working fine!

  - by user109156

  yesterday I installed Ubuntu 12 in my sony vaio lappy. I have Huwaei E173 3G modem, simply inserted that modem into usb slot, after a few seconds modem started blinking finding as activated. I opened network profile and created a new network under 'Mobile broadband' tab everything was automated and I felt awesome, infact I used net for a while. Next morning, I placed modem into usb, nothing happened, no sign of modem presence even but modem is blinking, I tried creating a new connection once again but attained no luck. Kindly help me in resolving problem. regards sandy

  Read the article

• How to make Unity 3D work with Bumblebee using the Intel chipset

  - by EboMike

  I have a Sony VAIO S laptop with the dreaded Optimus and finally managed to get Bumblebee to work fully on Ubuntu 12.04 so that I can utilize both the hardware acceleration of the Intel chipset as well as the Nvidia one via optirun and/or bumble-app-settings. However, the desktop effects don't work. But they should, I vaguely remember that they worked for a while before I had Bumblebee installed. This is what I get with the support test: :~$ /usr/lib/nux/unity_support_test -p Xlib: extension "NV-GLX" missing on display ":0". OpenGL vendor string: Tungsten Graphics, Inc OpenGL renderer string: Mesa DRI Intel(R) Ivybridge Mobile OpenGL version string: 1.4 (2.1 Mesa 8.0.2) Not software rendered: yes Not blacklisted: yes GLX fbconfig: yes GLX texture from pixmap: yes GL npot or rect textures: yes GL vertex program: yes GL fragment program: yes GL vertex buffer object: no GL framebuffer object: yes GL version is 1.4+: yes Unity 3D supported: no First of all, I kind of doubt that the chipset doesn't support VBOs (essentially a standard feature in GL). Neither Xorg.0.log nor Xorg.8.log show any particular errors. As for the Nvidia drivers: In order to get them to work, I had to install the 304.22 drivers (older ones wouldn't work). They clobbered libglx.so, so I reinstated the xserver-xorg-core libglx.so in its original place, moved Nvidia's libglx.so to an nvidia-specific folder and specified that folder in the bumblebee.config. That seems to work and shouldn't cause the problem I see here. For fun, I tried to use the Nvidia chipset for Unity, but that didn't fly either: ~$ optirun /usr/lib/nux/unity_support_test -p OpenGL vendor string: NVIDIA Corporation OpenGL renderer string: GeForce GT 640M LE/PCIe/SSE2 OpenGL version string: 4.2.0 NVIDIA 304.22 Not software rendered: yes Not blacklisted: yes GLX fbconfig: yes GLX texture from pixmap: no GL npot or rect textures: yes GL vertex program: yes GL fragment program: yes GL vertex buffer object: yes GL framebuffer object: yes GL version is 1.4+: yes Unity 3D supported: no

  Read the article

• Cannot login in account with encrypted home after update from 11.04 to 11.10

  - by martin

  After upgrading from ubuntu 11.04 to 10.10 I cannot access my encrypted home partition anymore. I can login, however all data stays encrypted. ecryptfs-mount-private gives: ERROR: Encrypted private directory is not setup properly Any idea how to fix this? Update I have several kernels installed (after the upgrade my menu.lst looks like this: http://paste.org/pastebin/view/35591) the problem is the same for all kernels. Booting from 2.6.32-27-generic and adduser --encrypt-home tes gives: Adding user `tes' ... Adding new group `tes' (1008) ... Adding new user `tes' (1007) with group `tes' ... Creating home directory `/home/tes' ... Setting up encryption ... ************************************************************************ YOU SHOULD RECORD YOUR MOUNT PASSPHRASE AND STORE IT IN A SAFE LOCATION. ecryptfs-unwrap-passphrase ~/.ecryptfs/wrapped-passphrase THIS WILL BE REQUIRED IF YOU NEED TO RECOVER YOUR DATA AT A LATER TIME. ************************************************************************ Error: Your kernel does not support filename encryption ERROR: Could not add passphrase to the current keyring adduser: `/usr/bin/ecryptfs-setup-private -b -u tes' returned error code 1. Exiting.

  Read the article

• Unable to locate package lightread

  - by TENG PENG

  I have changed my source to local server. I'm using Ubuntu 12.10. When I type apt-cache search in terminal, it shows nothing. When I install lightread it shows Unable to locate package lightread. When I install lightread manually by python. It shows python '/home/peng/Downloads/quickly_trunk/setup.py' Traceback (most recent call last): File "/home/peng/Downloads/quickly_trunk/setup.py", line 93, in <module> data_files=[('share/icons/hicolor/128x128/apps', ['data/media/lightread.png'])] File "/usr/lib/python2.7/dist-packages/DistUtilsExtra/auto.py", line 71, in setup src_mark(src, 'setup.py') File "/usr/lib/python2.7/dist-packages/DistUtilsExtra/auto.py", line 527, in src_mark src.remove(path) KeyError: 'setup.py' How to solve the problem?

  Read the article

• Make the sound louder in Lubuntu

  - by Andrew

  I have a Toshiba r835 running Lubuntu 11.10. Turning the volume slider up all the way doesn't give very loud sound. I've tried typing alsamixer in a terminal and turning up all the levels there to maximum, but the speakers are still fairly quiet. Is there a simple way to increase maximum volume in software? I understand that there are physical limits to the sound the laptop's speakers can produce, but I suspect my maximum volume is limited by software. EDIT: This is exactly the type of solution I'm looking for. However, it doesn't work for me. What I did: sudo pico /etc/asound.conf This file does not exist, so I create a new one, containing: pcm.!default { type plug slave.pcm "softvol" } pcm.softvol { type softvol slave { pcm "dmix" } control { name "Pre-Amp" card 0 } min_dB -5.0 max_dB 20.0 resolution 6 } I reboot the machine, and type alsamixer. I use my left/right arrow keys to inspect the various volume options. I expect to see a new option, called Pre-Amp, but I don't see one. This fix seems to work for other people. Why doesn't this fix work for me?

  Read the article

• what is the best program to capture my workings as an AVI or MPEG

  - by raihanchy

  I have already used recordmydesktop, xvidcap and kazam. My sound working fine with other audio or videos. xvidcap doesn't record sound at all. I have tried many ways. If I try as: 'padsp xvidcap', it also gives error, like: /dev/dsp cannot found or missing. I have changed it to /dev/snd. Still no effect. Even I can record sound through gnome-sound-recorder - after pressing record button, I open pavucontrol. Then from Recording tab, I choose 'Monitor of Analog Stereo'. But if I run xvidcap, I don't get that option in pavucontrol. kazam works a bit slow. It records at the beginning of the captured video. But for unknown reason, it eventually the sounds just go off. Also the video is not smooth as xvidcap. Though Kazam output as H64/MP4. Record my Desktop also doesn't give sound. Can you guys please help me, either - how to get sound with xvidcap or how kazam could be record nicely. I am looking something Camtasia, as used for Windows. Thanks in advance. Raihan

  Read the article

• How to Speed Up Any Android Phone By Disabling Animations

  - by Chris Hoffman

  Android phones — and tablets, too — display animations when moving between apps and screens. These animations look very slick, but they waste time — especially on fast phones, which could switch between apps instantly if not for the animations. Disabling these animations will speed up navigating between different apps and interface screens on your phone, saving you time. You can also speed up the animations if you’d rather see them. Access the Developer Options Menu First, we’ll need to access the Developer Options menu. It’s hidden by default so Android users won’t stumble across it unless they’re actually looking for it. To access the Developer Options menu, open the Settings screen, scroll down to the bottom of the list, and tap the About phone or About tablet option. Scroll down to the Build number field and tap it repeatedly. Eventually, you’ll see a message appear saying “You are now a developer!”. The Developer options submenu now appears on the Settings screen. You’ll find it near the bottom of the list, just above the About phone or About tablet option. Disable Interface Animations Open the Developer Options screen and slide the switch at the top of the screen to On. This allows you to change the hidden options on this screen. If you ever want to re-enable the animations and revert your changes, all you have to do is slide the Developer Options switch back to Off. Scroll down to the Drawing section. You’ll find the three options we want here — Window animation scale, Transition animation scale, and Animator duration scale. Tap each option and set it to Animation off to disable the associated animations. If you’d like to speed up the animations without disabling them entirely, select the Animation .5x option instead. If you’re feeling really crazy, you can even select longer animation durations. You can make the animations take as much as ten times longer with the Animation 10x setting. The Animator duration scale option applies to the transition animation that appears when you tap the app drawer button on your home screen.  Your change here won’t take effect immediately — you’ll have to restart Android’s launcher after changing the Animator duration scale setting. To restart Android’s launcher, open the Settings screen, tap Apps, swipe over to the All category, scroll down, and tap the Launcher app. Tap the Force stop button to forcibly close the launcher, then tap your device’s home button to re-launch the launcher. Your app drawer will now open immediately, too. Now whenever you open an app or transition to a new screen, it will pop up as quickly as possible — no waiting for animations and wasting processing power rendering them. How much of a speed improvement you’ll see here depends on your Android device and how fast it is. On our Nexus 4, this change makes many apps appear and become usable instantly if they’re running in the background. If you have a slower device, you may have to wait a moment for apps to be usable. That’s one of the big reasons why Android and other operating systems use animations. Animations help paper over delays that can occur while the operating system loads the app.     

  Read the article

• How do I make Home and End work in PuTTY SSH with fish shell?

  - by endolith

  Years ago, an Ubuntu update broke this and I've never found a solution. I have fish as my default shell. Ubuntu 12.10 Locally (Gnome Terminal), Home and End keys work fine in both fish and bash. When I log in by SSH using PuTTY, then run bash, Home and End work fine inside of bash. However, when I log in by SSH using PuTTY, in the default fish shell, pressing Home key produces [1~ (sometimes erasing the line, sometimes not). When I press End, it produces [4~. How do I get Home and End to work correctly?

  Read the article

• How To Prevent Your Computer From Waking Up Accidentally

  - by Chris Hoffman

  If you find your Windows computer waking from sleep for no apparent reason, your computer is either being woken up by a hardware device – such as your mouse — or scheduled task set to wake your computer. In some cases, the cause may not be obvious. For example, if your laptop occasionally wakes up for no apparent reason, it’s possible that the floor is shaking a bit, causing the mouse to vibrate slightly and wake the computer. Java is Insecure and Awful, It’s Time to Disable It, and Here’s How What Are the Windows A: and B: Drives Used For? HTG Explains: What is DNS?

  Read the article

• Design non-windowed Gtk.Frame in Glade

  - by Ángel Araya

  I'm building a ToDo app for personal porpouses, and I'm using Quickly and Glade for this. I want it to desplay a list of the pending to-do elements. The problem I'm having is that I can't find the way to create a single Frame (not inside another window) with some other widgets inside to dinamically add them to a VBox that I already have created in Glade. Is there a way to do it or do I have to create the Frame in the code?

  Read the article

• Can't mount windows partition?

  - by C.J.

  When I try to open the Windows Partition from Ubuntu I receive the error: Unable to mount 55 GB Filesystem Error mounting: mount exited without exit code 13: ntfs_mst_post_read_fixup_warn: magic: 0x04010400 size: 1024 usa_ofs: 1026 usa_count: 1026: Invalid argument Record 6 has no FILE magic (0x4010400) Failed to open inode FILE_Bitmap: Input/output error Failed to mount '/dev/sda2': Input/output error NTFS is either inconsistent, or there is a hardware fault, or it's a SoftRAID/FakeRAID hardware. In the first case run chkdsk /f on Windows then reboot into Windows twice. The usage of the /f parameter is very important! If the device is a SoftRAID/FakeRAID then first activate it and mount a different device under the /dev/mapper/directory, (e.g. /dev/mapper/nvidia_eahaabcc1). Please see the 'dmraid' documentation for more detail. Additionally, I can't open the Windows Partition. I've tried updating it many times but it won't show up on GRUB. Does anybody know what all this means? And how I might fix it? I thank you for any help in advance

  Read the article

• How to Run files and open folders as an administrater 11.10

  - by Mattlinux1

  Solved!!! Enable open as administrator in nautilus! To get started, press Ctrl – Alt – T on your keyboard to open Terminal. When it opens, run the commands below: enter code here sudo apt-get install nautilus-gksu After installing that application run copy and paste the line below and press enter. sudo cp /usr/lib/nautilus/extensions-2.0/libnautilus-gksu.so /usr/lib/nautilus/extensions-3.0/ Finally, log out and back in then go and test it, by clicking your right mouse click on the file you want to run as Admin and your see a popup menu with the words: open as administrater. Visit: http://www.liberiangeek.net/2011/12/add-open-as-administrator-to-nautilus-context-menu-in-ubuntu-11-10-oneiric-ocelot/ for help and from here. Enjoy!

  Read the article

< Previous Page | 379 380 381 382 383 384 385 386 387 388 389 390  | Next Page >