Search Results

Search found 52182 results on 2088 pages for 'something for the weekend'.

Page 383/2088 | < Previous Page | 379 380 381 382 383 384 385 386 387 388 389 390  | Next Page >

  • Designing for the future

    - by Dennis Vroegop
    User interfaces and user experience design is a fast moving field. It’s something that changes pretty quick: what feels fresh today will look outdated tomorrow. I remember the day I first got a beta version of Windows 95 and I felt swept away by the user interface of the OS. It felt so modern! If I look back now, it feels old. Well, it should: the design is 17 years old which is an eternity in our field. Of course, this is not limited to UI. Same goes for many industries. I want you to think back of the cars that amazed you when you were in your teens (if you are in your teens then this may not apply to you). Didn’t they feel like part of the future? Didn’t you think that this was the ultimate in designs? And aren’t those designs hopelessly outdated today (again, depending on your age, it may just be me)? Let’s review the Win95 design: And let’s compare that to Windows 7: There are so many differences here, I wouldn’t even know where to start explaining them. The general feeling however is one of more usability: studies have shown Windows 7 is much easier to understand for new users than the older versions of Windows did. Of course, experienced Windows users didn’t like it: people are usually afraid of changes and like to stick to what they know. But for new users this was a huge improvement. And that is what UX design is all about: make a product easier to use, with less training required and make users feel more productive. Still, there are areas where this doesn’t hold up. There are plenty examples of designs from the past that are still fresh today. But if you look closely at them, you’ll notice some subtle differences. This differences are what keep the designs fresh. A good example is the signs you’ll find on the road. They haven’t changed much over the years (otherwise people wouldn’t recognize them anymore) but they have been changing gradually to reflect changes in traffic. The same goes for computer interfaces. With each new product or version of a product, the UI and UX is changed gradually. Every now and then however, a bigger change is needed. Just think about the introduction of the Ribbon in Microsoft Office 2007: the whole UI was redesigned. A lot of old users (not in age, but in times of using older versions) didn’t like it a bit, but new users or casual users seem to be more efficient using the product. Which, of course, is exactly the reason behind the changes. I believe that a big engine behind the changes in User Experience design has been the web. In the old days (i.e. before the explosion of the internet) user interface design in Windows applications was limited to choosing the margins between your battleship gray buttons. When the web came along, and especially the web 2.0 where the browsers started to act more and more as application platforms, designers stepped in and made a huge impact. In the browser, they could do whatever they wanted. In the beginning this was limited to the darn blink tag but gradually people really started to think about UX. Even more so: the design of the UI and the whole experience was taken away from the developers and put into the hands of people who knew what they were doing: UX designers. This caused some problems. Everyone who has done a web project in the early 2000’s must have had the same experience: the designers give you a set of Photoshop files and tell you to translate it to HTML. Which, of course, is very hard to do. However, with new tooling and new standards this became much easier. The latest version of HTML and CSS has taken the responsibility for the design away from the developers and placed them in the capable hands of the designers. And that’s where that responsibility belongs, after all, I don’t want a designer to muck around in my c# code just as much as he or she doesn’t want me to poke in the sites style definitions. This change in responsibilities resulted in good looking but more important: better thought out user interfaces in websites. And when websites became more and more interactive, people started to expect the same sort of look and feel from their desktop applications. But that didn’t really happen. Most business applications still have that battleship gray look and feel. Ok, they may use a different color but we’re not talking colors here but usability. Now, you may not be able to read the Dutch captions, but even if you did you wouldn’t understand what was going on. At least, not when you first see it. You have to scan the screen, read all the labels, see how they are related to the other elements on the screen and then figure out what they do. If you’re an experienced user of this application however, this might be a good thing: you know what to do and you get all the information you need in one single screen. But for most applications this isn’t the case. A lot of people only use their computer for a limited time a day (a weird concept for me, but it happens) and need it to get something done and then get on with their lives. For them, a user interface experience like the above isn’t working. (disclaimer: I just picked a screenshot, I am not saying this is bad software but it is an example of about 95% of the Windows applications out there). For the knowledge worker, this isn’t a problem. They use one or two systems and they know exactly what they need to do to achieve their goal. They don’t want any clutter on their screen that distracts them from their task, they just want to be as efficient as possible. When they know the systems they are very productive. The point is, how long does it take to become productive? And: could they be even more productive if the UX was better? Are there things missing that they don’t know about? Are there better ways to achieve what they want to achieve? Also: could a system be designed in such a way that it is not only much more easy to work with but also less tiring? in the example above you need to switch between the keyboard and mouse a lot, something that we now know can be very tiring. The goal of most applications (being client apps or websites on any kind of device) is to provide information. Information is data that when given to the right people, on the right time, in the right place and when it is correct adds value for that person (please, remember that definition: I still hear the statement “the information was wrong” which doesn’t make sense: data can be wrong, information cannot be). So if a system provides data, how can we make sure the chances of becoming information is as high as possible? A good example of a well thought-out system that attempts this is the Zune client. It is a very good application, and I think the UX is much better than it’s main competitor iTunes. Have a look at both: On the left you see the iTunes screenshot, on the right the Zune. As you notice, the Zune screen has more images but less chrome (chrome being visuals not part of the data you want to show, i.e. edges around buttons). The whole thing is text oriented or image oriented, where that text or image is part of the information you need. What is important is big, what’s less important is smaller. Yet, everything you need to know at that point is present and your attention is drawn immediately to what you’re trying to achieve: information about music. You can easily switch between the content on your machine and content on your Zune player but clicking on the image of the player. But if you didn’t know that, you’d find out soon enough: the whole UX is designed in such a way that it invites you to play around. So sooner or later (probably sooner) you’d click on that image and you would see what it does. In the iTunes version it’s harder to find: the discoverability is a lot lower. For inexperienced people the Zune player feels much more natural than the iTunes player, and they get up to speed a lot faster. How does this all work? Why is this UX better? The answer lies in a project from Microsoft with the codename (it seems to be becoming the official name though) “Metro”. Metro is a design language, based on certain principles. When they thought about UX they took a good long look around them and went out in search of metaphors. And they found them. The team noticed that signage in streets, airports, roads, buildings and so on are usually very clear and very precise. These signs give you the information you need and nothing more. It’s simple, clearly understood and fast to understand. A good example are airport signs. Airports can be intimidating places, especially for the non-experienced traveler. In the early 1990’s Amsterdam Airport Schiphol decided to redesign all the signage to make the traveller feel less disoriented. They developed a set of guidelines for signs and implemented those. Soon, most airports around the world adopted these ideas and you see variations of the Dutch signs everywhere on the globe. The signs are text-oriented. Yes, there are icons explaining what it all means for the people who can’t read or don’t understand the language, but the basic sign language is text. It’s clear, it’s high-contrast and it’s easy to understand. One look at the sign and you know where to go. The only thing I don’t like is the green sign pointing to the emergency exit, but since this is the default style for emergency exits I understand why they did this. If you look at the Zune UI again, you’ll notice the similarities. Text oriented, little or no icons, clear usage of fonts and all the information you need. This design language has a set of principles: Clean, light, open and fast Content, not chrome Soulful and alive These are just a couple of the principles, you can read the whole philosophy behind Metro for Windows Phone 7 here. These ideas seem to work. I love my Windows Phone 7. It’s easy to use, it’s clear, there’s no clutter that I do not need. It works for me. And I noticed it works for a lot of other people as well, especially people who aren’t as proficient with computers as I am. You see these ideas in a lot other places. Corning, a manufacturer of glass, has made a video of possible usages of their products. It’s their glimpse into the future. You’ll notice that a lot of the UI in the screens look a lot like what Microsoft is doing with Metro (not coincidentally Corning is the supplier for the Gorilla glass display surface on the new SUR40 device (or Surface v2.0 as a lot of people call it)). The idea behind this vision is that data should be available everywhere where you it. Systems should be available at all times and data is presented in a clear and light manner so that you can turn that data into information. You don’t need a lot of fancy animations that only distract from the data. You want the data and you want it fast. Have a look at this truly inspiring video that made: This is what I believe the future will look like. Of course, not everything is possible, or even desirable. But it is a nice way to think about the future . I feel very strongly about designing applications in such a way that they add value to the user. Designing applications that turn data into information. Applications that make the user feel happy to use them. So… when are you going to drop the battleship-gray designs? Tags van Technorati: surface,design,windows phone 7,wp7,metro

    Read the article

  • Unable to connect to Samba printer

    - by user127236
    I have a headless Ubuntu 12.04 server for files and printers. It shares files via Samba just fine. However, the HP PSC-750xi connected to the server via USB is not accessible from my Ubuntu 12.04 laptop. I can browse for it in the Printing control panel, but any attempt to authenticate my ID to the printer with my user credentials results in the error "This print share is not accessible". I have included the Samba smb.conf file below. Any help appreciated. Thanks... JGB # # Sample configuration file for the Samba suite for Debian GNU/Linux. # # # This is the main Samba configuration file. You should read the # smb.conf(5) manual page in order to understand the options listed # here. Samba has a huge number of configurable options most of which # are not shown in this example # # Some options that are often worth tuning have been included as # commented-out examples in this file. # - When such options are commented with ";", the proposed setting # differs from the default Samba behaviour # - When commented with "#", the proposed setting is the default # behaviour of Samba but the option is considered important # enough to be mentioned here # # NOTE: Whenever you modify this file you should run the command # "testparm" to check that you have not made any basic syntactic # errors. # A well-established practice is to name the original file # "smb.conf.master" and create the "real" config file with # testparm -s smb.conf.master >smb.conf # This minimizes the size of the really used smb.conf file # which, according to the Samba Team, impacts performance # However, use this with caution if your smb.conf file contains nested # "include" statements. See Debian bug #483187 for a case # where using a master file is not a good idea. # #======================= Global Settings ======================= [global] log file = /var/log/samba/log.%m passwd chat = *Enter\snew\s*\spassword:* %n\n *Retype\snew\s*\spassword:* %n\n *password\supdated\ssuccessfully* . obey pam restrictions = yes map to guest = bad user encrypt passwords = true passwd program = /usr/bin/passwd %u passdb backend = tdbsam dns proxy = no writeable = yes server string = %h server (Samba, Ubuntu) unix password sync = yes workgroup = WORKGROUP syslog = 0 panic action = /usr/share/samba/panic-action %d usershare allow guests = yes max log size = 1000 pam password change = yes ## Browsing/Identification ### # Change this to the workgroup/NT-domain name your Samba server will part of # server string is the equivalent of the NT Description field # Windows Internet Name Serving Support Section: # WINS Support - Tells the NMBD component of Samba to enable its WINS Server # wins support = no # WINS Server - Tells the NMBD components of Samba to be a WINS Client # Note: Samba can be either a WINS Server, or a WINS Client, but NOT both ; wins server = w.x.y.z # This will prevent nmbd to search for NetBIOS names through DNS. # What naming service and in what order should we use to resolve host names # to IP addresses ; name resolve order = lmhosts host wins bcast #### Networking #### # The specific set of interfaces / networks to bind to # This can be either the interface name or an IP address/netmask; # interface names are normally preferred ; interfaces = 127.0.0.0/8 eth0 # Only bind to the named interfaces and/or networks; you must use the # 'interfaces' option above to use this. # It is recommended that you enable this feature if your Samba machine is # not protected by a firewall or is a firewall itself. However, this # option cannot handle dynamic or non-broadcast interfaces correctly. ; bind interfaces only = yes #### Debugging/Accounting #### # This tells Samba to use a separate log file for each machine # that connects # Cap the size of the individual log files (in KiB). # If you want Samba to only log through syslog then set the following # parameter to 'yes'. # syslog only = no # We want Samba to log a minimum amount of information to syslog. Everything # should go to /var/log/samba/log.{smbd,nmbd} instead. If you want to log # through syslog you should set the following parameter to something higher. # Do something sensible when Samba crashes: mail the admin a backtrace ####### Authentication ####### # "security = user" is always a good idea. This will require a Unix account # in this server for every user accessing the server. See # /usr/share/doc/samba-doc/htmldocs/Samba3-HOWTO/ServerType.html # in the samba-doc package for details. # security = user # You may wish to use password encryption. See the section on # 'encrypt passwords' in the smb.conf(5) manpage before enabling. # If you are using encrypted passwords, Samba will need to know what # password database type you are using. # This boolean parameter controls whether Samba attempts to sync the Unix # password with the SMB password when the encrypted SMB password in the # passdb is changed. # For Unix password sync to work on a Debian GNU/Linux system, the following # parameters must be set (thanks to Ian Kahan <<[email protected]> for # sending the correct chat script for the passwd program in Debian Sarge). # This boolean controls whether PAM will be used for password changes # when requested by an SMB client instead of the program listed in # 'passwd program'. The default is 'no'. # This option controls how unsuccessful authentication attempts are mapped # to anonymous connections ########## Domains ########### # Is this machine able to authenticate users. Both PDC and BDC # must have this setting enabled. If you are the BDC you must # change the 'domain master' setting to no # ; domain logons = yes # # The following setting only takes effect if 'domain logons' is set # It specifies the location of the user's profile directory # from the client point of view) # The following required a [profiles] share to be setup on the # samba server (see below) ; logon path = \\%N\profiles\%U # Another common choice is storing the profile in the user's home directory # (this is Samba's default) # logon path = \\%N\%U\profile # The following setting only takes effect if 'domain logons' is set # It specifies the location of a user's home directory (from the client # point of view) ; logon drive = H: # logon home = \\%N\%U # The following setting only takes effect if 'domain logons' is set # It specifies the script to run during logon. The script must be stored # in the [netlogon] share # NOTE: Must be store in 'DOS' file format convention ; logon script = logon.cmd # This allows Unix users to be created on the domain controller via the SAMR # RPC pipe. The example command creates a user account with a disabled Unix # password; please adapt to your needs ; add user script = /usr/sbin/adduser --quiet --disabled-password --gecos "" %u # This allows machine accounts to be created on the domain controller via the # SAMR RPC pipe. # The following assumes a "machines" group exists on the system ; add machine script = /usr/sbin/useradd -g machines -c "%u machine account" -d /var/lib/samba -s /bin/false %u # This allows Unix groups to be created on the domain controller via the SAMR # RPC pipe. ; add group script = /usr/sbin/addgroup --force-badname %g ########## Printing ########## # If you want to automatically load your printer list rather # than setting them up individually then you'll need this # load printers = yes # lpr(ng) printing. You may wish to override the location of the # printcap file ; printing = bsd ; printcap name = /etc/printcap # CUPS printing. See also the cupsaddsmb(8) manpage in the # cupsys-client package. ; printing = cups ; printcap name = cups ############ Misc ############ # Using the following line enables you to customise your configuration # on a per machine basis. The %m gets replaced with the netbios name # of the machine that is connecting ; include = /home/samba/etc/smb.conf.%m # Most people will find that this option gives better performance. # See smb.conf(5) and /usr/share/doc/samba-doc/htmldocs/Samba3-HOWTO/speed.html # for details # You may want to add the following on a Linux system: # SO_RCVBUF=8192 SO_SNDBUF=8192 # socket options = TCP_NODELAY # The following parameter is useful only if you have the linpopup package # installed. The samba maintainer and the linpopup maintainer are # working to ease installation and configuration of linpopup and samba. ; message command = /bin/sh -c '/usr/bin/linpopup "%f" "%m" %s; rm %s' & # Domain Master specifies Samba to be the Domain Master Browser. If this # machine will be configured as a BDC (a secondary logon server), you # must set this to 'no'; otherwise, the default behavior is recommended. # domain master = auto # Some defaults for winbind (make sure you're not using the ranges # for something else.) ; idmap uid = 10000-20000 ; idmap gid = 10000-20000 ; template shell = /bin/bash # The following was the default behaviour in sarge, # but samba upstream reverted the default because it might induce # performance issues in large organizations. # See Debian bug #368251 for some of the consequences of *not* # having this setting and smb.conf(5) for details. ; winbind enum groups = yes ; winbind enum users = yes # Setup usershare options to enable non-root users to share folders # with the net usershare command. # Maximum number of usershare. 0 (default) means that usershare is disabled. ; usershare max shares = 100 # Allow users who've been granted usershare privileges to create # public shares, not just authenticated ones #======================= Share Definitions ======================= # Un-comment the following (and tweak the other settings below to suit) # to enable the default home directory shares. This will share each # user's home director as \\server\username ;[homes] ; comment = Home Directories ; browseable = no # By default, the home directories are exported read-only. Change the # next parameter to 'no' if you want to be able to write to them. ; read only = yes # File creation mask is set to 0700 for security reasons. If you want to # create files with group=rw permissions, set next parameter to 0775. ; create mask = 0700 # Directory creation mask is set to 0700 for security reasons. If you want to # create dirs. with group=rw permissions, set next parameter to 0775. ; directory mask = 0700 # By default, \\server\username shares can be connected to by anyone # with access to the samba server. Un-comment the following parameter # to make sure that only "username" can connect to \\server\username # The following parameter makes sure that only "username" can connect # # This might need tweaking when using external authentication schemes ; valid users = %S # Un-comment the following and create the netlogon directory for Domain Logons # (you need to configure Samba to act as a domain controller too.) ;[netlogon] ; comment = Network Logon Service ; path = /home/samba/netlogon ; guest ok = yes ; read only = yes # Un-comment the following and create the profiles directory to store # users profiles (see the "logon path" option above) # (you need to configure Samba to act as a domain controller too.) # The path below should be writable by all users so that their # profile directory may be created the first time they log on ;[profiles] ; comment = Users profiles ; path = /home/samba/profiles ; guest ok = no ; browseable = no ; create mask = 0600 ; directory mask = 0700 [printers] comment = All Printers browseable = no path = /var/spool/samba printable = yes guest ok = no read only = yes create mask = 0700 # Windows clients look for this share name as a source of downloadable # printer drivers [print$] comment = Printer Drivers browseable = yes writeable = no path = /var/lib/samba/printers # Uncomment to allow remote administration of Windows print drivers. # You may need to replace 'lpadmin' with the name of the group your # admin users are members of. # Please note that you also need to set appropriate Unix permissions # to the drivers directory for these users to have write rights in it ; write list = root, @lpadmin # A sample share for sharing your CD-ROM with others. ;[cdrom] ; comment = Samba server's CD-ROM ; read only = yes ; locking = no ; path = /cdrom ; guest ok = yes # The next two parameters show how to auto-mount a CD-ROM when the # cdrom share is accesed. For this to work /etc/fstab must contain # an entry like this: # # /dev/scd0 /cdrom iso9660 defaults,noauto,ro,user 0 0 # # The CD-ROM gets unmounted automatically after the connection to the # # If you don't want to use auto-mounting/unmounting make sure the CD # is mounted on /cdrom # ; preexec = /bin/mount /cdrom ; postexec = /bin/umount /cdrom [mediafiles] path = /media/multimedia/

    Read the article

  • Week in Geek: IPv6 Capable Smartphones Compromise User Privacy Edition

    - by Asian Angel
    This week we learned how to “clone a disk, resize static windows, and create system function shortcuts”, use 45 different services, sites, and apps to help read favorite sites, add MP3 support to Audacity (for saving in MP3 format), install a Wii game loader for easy backups and fast load times, create a Blue Screen of Death in any color, and more. Photo by legofenris. Weekly News Links Photo by The H Security. IPv6: Smartphones compromise users’ privacy Since version 4 of the iOS operating system, Apple’s iPhones, iPads and iPods have been capable of handling IPv6, and most Android devices have been capable since version 2.1. However, the operating systems transfer an ID that discloses information about their users. Dumb phones can be attacked too Much of the discussion of security threats to mobile phones revolves around smartphones, but researchers have found that less advanced “feature phones,” still used by the majority of people around the world, also are vulnerable to attack. SCADA exploit – the dragon awakes The recent publication of an exploit for KingView, a software package for visualising industrial process control systems, appears to be having an effect. Threatpost reports that both the Chinese vendor Wellintech and Chinese CERT (CN-CERT) have now reacted. Sophos: Spam to get more malicious Spam is becoming more malicious in nature as trickery tactics change in line with current user interests, according to a new report released Tuesday by Sophos. Global spam traffic rebounds as Rustock wakes Spam is on the rise after the Rustock botnet awoke from its Christmas slumber, according to Symantec. Cracking WPA keys in the cloud At the forthcoming Black Hat conference, blogger Thomas Roth plans to demonstrate how weak WPA PSKs can be cracked quickly and easily using Amazon’s Elastic Compute Cloud (EC2) service. Microsoft Security Advisory: Vulnerability in Internet Explorer could allow remote code execution Provides a link to more details about the vulnerability and shows a work-around/fix for the problem. Adobe plans to make it easier to delete Flash cookies in web browsers The new API, NPAPI:ClearSiteData, will allow Flash cookies – also known as Local Shared Objects (LSO) – to be deleted directly in the browser’s settings. Firefox beta getting new database standard The ninth beta version of Firefox is set to get support for a standard called IndexedDB that provides a database interface useful for offline data storage and other tasks needing information on a browser’s computer. MetroPCS accused of blocking certain Net content MetroPCS is violating the FCC’s recently approved Net neutrality rules by blocking certain Internet content, say several public interest groups. Server and Tools chief Muglia to leave Microsoft in summer 2011 Microsoft veteran and Server & Tools Business (STB) President Bob Muglia is leaving Microsoft, according to an email that CEO Steve Ballmer sent to employees on January 10. Report: DOJ nearing decision on Google-ITA The U.S. Department of Justice is gearing up for a possible formal antitrust investigation into whether or not Google should be allowed to purchase travel software company ITA Software, according to a report. South Korea says Google Street View broke law Police in South Korea reportedly say Google broke the country’s law when its Street View service captured personal data from unsecure Wi-Fi networks. The backlash over Google’s HTML5 video bet Choosing strategies based on what you believe to be long-term benefits is generally a good idea when running a business, but if you manage to alienate the world in the process, the long term may become irrelevant. Google answers critics on HTML5 Web video move Google responded to critics of its decision to drop support for a popular HTML5 video codec by declaring that a royalty-supported standard for Web video will hold the Web hostage. Random TinyHacker Links A Special GiveAway: a Great Book & Great Security Software The team from 7 Tutorials has a special giveaway running during the month of January. Signed copies of their latest book, full 1-year licenses of BitDefender Internet Security 2011 and free 3-month trials for everyone willing to participate. One Click Rooting For Android Phones Here’s a nice tool that helps you root your Android phone effortlessly. New Angry Birds Free version 1.0 Available in the App Store. Google Code University Learn programming at Google Code University. Capture and Share Your Favorite Part Of a YouTube Video SnipSnip.it lets you share only the part of the video that you like. Super User Questions More great questions and answers from this past week’s popular topics at Super User. What are the Windows A: and B: drives used for? Does OS X support linux-like features? What is the easiest way to make a backup of an entire hard disk? Will shifting from Wireless to Wired network result in better performance? Is it legal to install Windows 7 Home Premium Retail inside VMware virtual machine? How-To Geek Weekly Article Recap Enjoy reading through our hottest articles from this past week. The 50 Best Ways to Disable Built-in Windows Features You Don’t Want The Best of CES (Consumer Electronics Show) in 2011 How to Upgrade Windows 7 Easily (And Understand Whether You Should) The Worst of CES (Consumer Electronics Show) in 2011 The How-To Geek Guide to Audio Editing: Basic Noise Removal One Year Ago on How-To Geek More great articles from one year ago filled with helpful geeky goodness for you to enjoy. Share Text & Images the Easy Way with JustPaste.it Start Portable Firefox in Safe Mode Firefox 3.6 Release Candidate Available, Here’s How to Fix Your Incompatible Extensions Protect Your Computer from “Little Hands” with KidSafe Lock Prying Eyes Out of Your Minimized Windows Custom Crocheted Cylon-Cthulhu Hybrid What happens when you let your Cylon Centurion figure and your crocheted Cthulhu spend too many lonely nights together? A Cylon-Cthulhu hybrid, of course! You can get your own from the Cthulhu Chick store over on Etsy. Note: This is not an ad…Ruth is a friend of ours, and this Cylon-Cthulhu hybrid makes the perfect guard for the new MVP trophy in our office. The Geek Note Whether it is a geeky indoor project or just getting outside, we hope that you and your families have a terrific fun-filled weekend! Remember to keep sending those great tips in to us at [email protected]. Photo by qwrrty. Latest Features How-To Geek ETC How to Upgrade Windows 7 Easily (And Understand Whether You Should) The How-To Geek Guide to Audio Editing: Basic Noise Removal Install a Wii Game Loader for Easy Backups and Fast Load Times The Best of CES (Consumer Electronics Show) in 2011 The Worst of CES (Consumer Electronics Show) in 2011 HTG Projects: How to Create Your Own Custom Papercraft Toy Firefox 4.0 Beta 9 Available for Download – Get Your Copy Now The Frustrations of a Computer Literate Watching a Newbie Use a Computer [Humorous Video] Season0nPass Jailbreaks Current Gen Apple TVs IBM’s Jeopardy Playing Computer Watson Shows The Pros How It’s Done [Video] Tranquil Juice Drop Abstract Wallpaper Pulse Is a Sleek Newsreader for iOS and Android Devices

    Read the article

  • How to create a new WCF/MVC/jQuery application from scratch

    - by pjohnson
    As a corporate developer by trade, I don't get much opportunity to create from-the-ground-up web sites; usually it's tweaks, fixes, and new functionality to existing sites. And with hobby sites, I often don't find the challenges I run into with enterprise systems; usually it's starting from Visual Studio's boilerplate project and adding whatever functionality I want to play around with, rarely deploying outside my own machine. So my experience creating a new enterprise-level site was a bit dated, and the technologies to do so have come a long way, and are much more ready to go out of the box. My intention with this post isn't so much to provide any groundbreaking insights, but to just tie together a lot of information in one place to make it easy to create a new site from scratch. Architecture One site I created earlier this year had an MVC 3 front end and a WCF 4-driven service layer. Using Visual Studio 2010, these project types are easy enough to add to a new solution. I created a third Class Library project to store common functionality the front end and services layers both needed to access, for example, the DataContract classes that the front end uses to call services in the service layer. By keeping DataContract classes in a separate project, I avoided the need for the front end to have an assembly/project reference directly to the services code, a bit cleaner and more flexible of an SOA implementation. Consuming the service Even by this point, VS has given you a lot. You have a working web site and a working service, neither of which do much but are great starting points. To wire up the front end and the services, I needed to create proxy classes and WCF client configuration information. I decided to use the SvcUtil.exe utility provided as part of the Windows SDK, which you should have installed if you installed VS. VS also provides an Add Service Reference command since the .NET 1.x ASMX days, which I've never really liked; it creates several .cs/.disco/etc. files, some of which contained hardcoded URL's, adding duplicate files (*1.cs, *2.cs, etc.) without doing a good job of cleaning up after itself. I've found SvcUtil much cleaner, as it outputs one C# file (containing several proxy classes) and a config file with settings, and it's easier to use to regenerate the proxy classes when the service changes, and to then maintain all your configuration in one place (your Web.config, instead of the Service Reference files). I provided it a reference to a copy of my common assembly so it doesn't try to recreate the data contract classes, had it use the type List<T> for collections, and modified the output files' names and .NET namespace, ending up with a command like: svcutil.exe /l:cs /o:MyService.cs /config:MyService.config /r:MySite.Common.dll /ct:System.Collections.Generic.List`1 /n:*,MySite.Web.ServiceProxies http://localhost:59999/MyService.svc I took the generated MyService.cs file and drop it in the web project, under a ServiceProxies folder, matching the namespace and keeping it separate from classes I coded manually. Integrating the config file took a little more work, but only needed to be done once as these settings didn't often change. A great thing Microsoft improved with WCF 4 is configuration; namely, you can use all the default settings and not have to specify them explicitly in your config file. Unfortunately, SvcUtil doesn't generate its config file this way. If you just copy & paste MyService.config's contents into your front end's Web.config, you'll copy a lot of settings you don't need, plus this will get unwieldy if you add more services in the future, each with its own custom binding. Really, as the only mandatory settings are the endpoint's ABC's (address, binding, and contract) you can get away with just this: <system.serviceModel>  <client>    <endpoint address="http://localhost:59999/MyService.svc" binding="wsHttpBinding" contract="MySite.Web.ServiceProxies.IMyService" />  </client></system.serviceModel> By default, the services project uses basicHttpBinding. As you can see, I switched it to wsHttpBinding, a more modern standard. Using something like netTcpBinding would probably be faster and more efficient since the client & service are both written in .NET, but it requires additional server setup and open ports, whereas switching to wsHttpBinding is much simpler. From an MVC controller action method, I instantiated the client, and invoked the method for my operation. As with any object that implements IDisposable, I wrapped it in C#'s using() statement, a tidy construct that ensures Dispose gets called no matter what, even if an exception occurs. Unfortunately there are problems with that, as WCF's ClientBase<TChannel> class doesn't implement Dispose according to Microsoft's own usage guidelines. I took an approach similar to Technology Toolbox's fix, except using partial classes instead of a wrapper class to extend the SvcUtil-generated proxy, making the fix more seamless from the controller's perspective, and theoretically, less code I have to change if and when Microsoft fixes this behavior. User interface The MVC 3 project template includes jQuery and some other common JavaScript libraries by default. I updated the ones I used to the latest versions using NuGet, available in VS via the Tools > Library Package Manager > Manage NuGet Packages for Solution... > Updates. I also used this dialog to remove packages I wasn't using. Given that it's smart enough to know the difference between the .js and .min.js files, I was hoping it would be smart enough to know which to include during build and publish operations, but this doesn't seem to be the case. I ended up using Cassette to perform the minification and bundling of my JavaScript and CSS files; ASP.NET 4.5 includes this functionality out of the box. The web client to web server link via jQuery was easy enough. In my JavaScript function, unobtrusively wired up to a button's click event, I called $.ajax, corresponding to an action method that returns a JsonResult, accomplished by passing my model class to the Controller.Json() method, which jQuery helpfully translates from JSON to a JavaScript object.$.ajax calls weren't perfectly straightforward. I tried using the simpler $.post method instead, but ran into trouble without specifying the contentType parameter, which $.post doesn't have. The url parameter is simple enough, though for flexibility in how the site is deployed, I used MVC's Url.Action method to get the URL, then sent this to JavaScript in a JavaScript string variable. If the request needed input data, I used the JSON.stringify function to convert a JavaScript object with the parameters into a JSON string, which MVC then parses into strongly-typed C# parameters. I also specified "json" for dataType, and "application/json; charset=utf-8" for contentType. For success and error, I provided my success and error handling functions, though success is a bit hairier. "Success" in this context indicates whether the HTTP request succeeds, not whether what you wanted the AJAX call to do on the web server was successful. For example, if you make an AJAX call to retrieve a piece of data, the success handler will be invoked for any 200 OK response, and the error handler will be invoked for failed requests, e.g. a 404 Not Found (if the server rejected the URL you provided in the url parameter) or 500 Internal Server Error (e.g. if your C# code threw an exception that wasn't caught). If an exception was caught and handled, or if the data requested wasn't found, this would likely go through the success handler, which would need to do further examination to verify it did in fact get back the data for which it asked. I discuss this more in the next section. Logging and exception handling At this point, I had a working application. If I ran into any errors or unexpected behavior, debugging was easy enough, but of course that's not an option on public web servers. Microsoft Enterprise Library 5.0 filled this gap nicely, with its Logging and Exception Handling functionality. First I installed Enterprise Library; NuGet as outlined above is probably the best way to do so. I needed a total of three assembly references--Microsoft.Practices.EnterpriseLibrary.ExceptionHandling, Microsoft.Practices.EnterpriseLibrary.ExceptionHandling.Logging, and Microsoft.Practices.EnterpriseLibrary.Logging. VS links with the handy Enterprise Library 5.0 Configuration Console, accessible by right-clicking your Web.config and choosing Edit Enterprise Library V5 Configuration. In this console, under Logging Settings, I set up a Rolling Flat File Trace Listener to write to log files but not let them get too large, using a Text Formatter with a simpler template than that provided by default. Logging to a different (or additional) destination is easy enough, but a flat file suited my needs. At this point, I verified it wrote as expected by calling the Microsoft.Practices.EnterpriseLibrary.Logging.Logger.Write method from my C# code. With those settings verified, I went on to wire up Exception Handling with Logging. Back in the EntLib Configuration Console, under Exception Handling, I used a LoggingExceptionHandler, setting its Logging Category to the category I already had configured in the Logging Settings. Then, from code (e.g. a controller's OnException method, or any action method's catch block), I called the Microsoft.Practices.EnterpriseLibrary.ExceptionHandling.ExceptionPolicy.HandleException method, providing the exception and the exception policy name I had configured in the Exception Handling Settings. Before I got this configured correctly, when I tried it out, nothing was logged. In working with .NET, I'm used to seeing an exception if something doesn't work or isn't set up correctly, but instead working with these EntLib modules reminds me more of JavaScript (before the "use strict" v5 days)--it just does nothing and leaves you to figure out why, I presume due in part to the listener pattern Microsoft followed with the Enterprise Library. First, I verified logging worked on its own. Then, verifying/correcting where each piece wires up to the next resolved my problem. Your C# code calls into the Exception Handling module, referencing the policy you pass the HandleException method; that policy's configuration contains a LoggingExceptionHandler that references a logCategory; that logCategory should be added in the loggingConfiguration's categorySources section; that category references a listener; that listener should be added in the loggingConfiguration's listeners section, which specifies the name of the log file. One final note on error handling, as the proper way to handle WCF and MVC errors is a whole other very lengthy discussion. For AJAX calls to MVC action methods, depending on your configuration, an exception thrown here will result in ASP.NET'S Yellow Screen Of Death being sent back as a response, which is at best unnecessarily and uselessly verbose, and at worst a security risk as the internals of your application are exposed to potential hackers. I mitigated this by overriding my controller's OnException method, passing the exception off to the Exception Handling module as above. I created an ErrorModel class with as few properties as possible (e.g. an Error string), sending as little information to the client as possible, to both maximize bandwidth and mitigate risk. I then return an ErrorModel in JSON format for AJAX requests: if (filterContext.HttpContext.Request.IsAjaxRequest()){    filterContext.Result = Json(new ErrorModel(...));    filterContext.ExceptionHandled = true;} My $.ajax calls from the browser get a valid 200 OK response and go into the success handler. Before assuming everything is OK, I check if it's an ErrorModel or a model containing what I requested. If it's an ErrorModel, or null, I pass it to my error handler. If the client needs to handle different errors differently, ErrorModel can contain a flag, error code, string, etc. to differentiate, but again, sending as little information back as possible is ideal. Summary As any experienced ASP.NET developer knows, this is a far cry from where ASP.NET started when I began working with it 11 years ago. WCF services are far more powerful than ASMX ones, MVC is in many ways cleaner and certainly more unit test-friendly than Web Forms (if you don't consider the code/markup commingling you're doing again), the Enterprise Library makes error handling and logging almost entirely configuration-driven, AJAX makes a responsive UI more feasible, and jQuery makes JavaScript coding much less painful. It doesn't take much work to get a functional, maintainable, flexible application, though having it actually do something useful is a whole other matter.

    Read the article

  • More Animation - Self Dismissing Dialogs

    - by Duncan Mills
    In my earlier articles on animation, I discussed various slide, grow and  flip transitions for items and containers.  In this article I want to discuss a fade animation and specifically the use of fades and auto-dismissal for informational dialogs.  If you use a Mac, you may be familiar with Growl as a notification system, and the nice way that messages that are informational just fade out after a few seconds. So in this blog entry I wanted to discuss how we could make an ADF popup behave in the same way. This can be an effective way of communicating information to the user without "getting in the way" with modal alerts. This of course, has been done before, but everything I've seen previously requires something like JQuery to be in the mix when we don't really need it to be.  The solution I've put together is nice and generic and will work with either <af:panelWindow> or <af:dialog> as a the child of the popup. In terms of usage it's pretty simple to use we  just need to ensure that the popup itself has clientComponent is set to true and includes the animation JavaScript (animateFadingPopup) on a popupOpened event: <af:popup id="pop1" clientComponent="true">   <af:panelWindow title="A Fading Message...">    ...  </af:panelWindow>   <af:clientListener method="animateFadingPopup" type="popupOpened"/> </af:popup>   The popup can be invoked in the normal way using showPopupBehavior or JavaScript, no special code is required there. As a further twist you can include an additional clientAttribute called preFadeDelay to define a delay before the fade itself starts (the default is 5 seconds) . To set the delay to just 2 seconds for example: <af:popup ...>   ...   <af:clientAttribute name="preFadeDelay" value="2"/>   <af:clientListener method="animateFadingPopup" type="popupOpened"/>  </af:popup> The Animation Styles  As before, we have a couple of CSS Styles which define the animation, I've put these into the skin in my case, and, as in the other articles, I've only defined the transitions for WebKit browsers (Chrome, Safari) at the moment. In this case, the fade is timed at 5 seconds in duration. .popupFadeReset {   opacity: 1; } .popupFadeAnimate {   opacity: 0;   -webkit-transition: opacity 5s ease-in-out; } As you can see here, we are achieving the fade by simply setting the CSS opacity property. The JavaScript The final part of the puzzle is, of course, the JavaScript, there are four functions, these are generic (apart from the Style names which, if you've changed above, you'll need to reflect here): The initial function invoked from the popupOpened event,  animateFadingPopup which starts a timer and provides the initial delay before we start to fade the popup. The function that applies the fade animation to the popup - initiatePopupFade. The callback function - closeFadedPopup used to reset the style class and correctly hide the popup so that it can be invoked again and again.   A utility function - findFadeContainer, which is responsible for locating the correct child component of the popup to actually apply the style to. Function - animateFadingPopup This function, as stated is the one hooked up to the popupOpened event via a clientListener. Because of when the code is called it does not actually matter how you launch the popup, or if the popup is re-used from multiple places. All usages will get the fade behavior. /**  * Client listener which will kick off the animation to fade the dialog and register  * a callback to correctly reset the popup once the animation is complete  * @param event  */ function animateFadingPopup(event) { var fadePopup = event.getSource();   var fadeCandidate = false;   //Ensure that the popup is initially Opaque   //This handles the situation where the user has dismissed   //the popup whilst it was in the process of fading   var fadeContainer = findFadeContainer(fadePopup);   if (fadeContainer != null) {     fadeCandidate = true;     fadeContainer.setStyleClass("popupFadeReset");   }   //Only continue if we can actually fade this popup   if (fadeCandidate) {   //See if a delay has been specified     var waitTimeSeconds = event.getSource().getProperty('preFadeDelay');     //Default to 5 seconds if not supplied     if (waitTimeSeconds == undefined) {     waitTimeSeconds = 5;     }     // Now call the fade after the specified time     var fadeFunction = function () {     initiatePopupFade(fadePopup);     };     var fadeDelayTimer = setTimeout(fadeFunction, (waitTimeSeconds * 1000));   } } The things to note about this function is the initial check that we have to do to ensure that the container is currently visible and reset it's style to ensure that it is.  This is to handle the situation where the popup has begun the fade, and yet the user has still explicitly dismissed the popup before it's complete and in doing so has prevented the callback function (described later) from executing. In this particular situation the initial display of the dialog will be (apparently) missing it's normal animation but at least it becomes visible to the user (and most users will probably not notice this difference in any case). You'll notice that the style that we apply to reset the  opacity - popupFadeReset, is not applied to the popup component itself but rather the dialog or panelWindow within it. More about that in the description of the next function findFadeContainer(). Finally, assuming that we have a suitable candidate for fading, a JavaScript  timer is started using the specified preFadeDelay wait time (or 5 seconds if that was not supplied). When this timer expires then the main animation styleclass will be applied using the initiatePopupFade() function Function - findFadeContainer As a component, the <af:popup> does not support styleClass attribute, so we can't apply the animation style directly.  Instead we have to look for the container within the popup which defines the window object that can have a style attached.  This is achieved by the following code: /**  * The thing we actually fade will be the only child  * of the popup assuming that this is a dialog or window  * @param popup  * @return the component, or null if this is not valid for fading  */ function findFadeContainer(popup) { var children = popup.getDescendantComponents();   var fadeContainer = children[0];   if (fadeContainer != undefined) {   var compType = fadeContainer.getComponentType();     if (compType == "oracle.adf.RichPanelWindow" || compType == "oracle.adf.RichDialog") {     return fadeContainer;     }   }   return null; }  So what we do here is to grab the first child component of the popup and check its type. Here I decided to limit the fade behaviour to only <af:dialog> and <af:panelWindow>. This was deliberate.  If  we apply the fade to say an <af:noteWindow> you would see the text inside the balloon fade, but the balloon itself would hang around until the fade animation was over and then hide.  It would of course be possible to make the code smarter to walk up the DOM tree to find the correct <div> to apply the style to in order to hide the whole balloon, however, that means that this JavaScript would then need to have knowledge of the generated DOM structure, something which may change from release to release, and certainly something to avoid. So, all in all, I think that this is an OK restriction and frankly it's windows and dialogs that I wanted to fade anyway, not balloons and menus. You could of course extend this technique and handle the other types should you really want to. One thing to note here is the selection of the first (children[0]) child of the popup. It does not matter if there are non-visible children such as clientListener before the <af:dialog> or <af:panelWindow> within the popup, they are not included in this array, so picking the first element in this way seems to be fine, no matter what the underlying ordering is within the JSF source.  If you wanted a super-robust version of the code you might want to iterate through the children array of the popup to check for the right type, again it's up to you.  Function -  initiatePopupFade  On to the actual fading. This is actually very simple and at it's heart, just the application of the popupFadeAnimate style to the correct component and then registering a callback to execute once the fade is done. /**  * Function which will kick off the animation to fade the dialog and register  * a callback to correctly reset the popup once the animation is complete  * @param popup the popup we are animating  */ function initiatePopupFade(popup) { //Only continue if the popup has not already been dismissed    if (popup.isPopupVisible()) {   //The skin styles that define the animation      var fadeoutAnimationStyle = "popupFadeAnimate";     var fadeAnimationResetStyle = "popupFadeReset";     var fadeContainer = findFadeContainer(popup);     if (fadeContainer != null) {     var fadeContainerReal = AdfAgent.AGENT.getElementById(fadeContainer.getClientId());       //Define the callback this will correctly reset the popup once it's disappeared       var fadeCallbackFunction = function (event) {       closeFadedPopup(popup, fadeContainer, fadeAnimationResetStyle);         event.target.removeEventListener("webkitTransitionEnd", fadeCallbackFunction);       };       //Initiate the fade       fadeContainer.setStyleClass(fadeoutAnimationStyle);       //Register the callback to execute once fade is done       fadeContainerReal.addEventListener("webkitTransitionEnd", fadeCallbackFunction, false);     }   } } I've added some extra checks here though. First of all we only start the whole process if the popup is still visible. It may be that the user has closed the popup before the delay timer has finished so there is no need to start animating in that case. Again we use the findFadeContainer() function to locate the correct component to apply the style to, and additionally we grab the DOM id that represents that container.  This physical ID is required for the registration of the callback function. The closeFadedPopup() call is then registered on the callback so as to correctly close the now transparent (but still there) popup. Function -  closeFadedPopup The final function just cleans things up: /**  * Callback function to correctly cancel and reset the style in the popup  * @param popup id of the popup so we can close it properly  * @param contatiner the window / dialog within the popup to actually style  * @param resetStyle the syle that sets the opacity back to solid  */ function closeFadedPopup(popup, container, resetStyle) { container.setStyleClass(resetStyle);   popup.cancel(); }  First of all we reset the style to make the popup contents opaque again and then we cancel the popup.  This will ensure that any of your user code that is waiting for a popup cancelled event will actually get the event, additionally if you have done this as a modal window / dialog it will ensure that the glasspane is dismissed and you can interact with the UI again.  What's Next? There are several ways in which this technique could be used, I've been working on a popup here, but you could apply the same approach to in-line messages. As this code (in the popup case) is generic it will make s pretty nice declarative component and maybe, if I get time, I'll look at constructing a formal Growl component using a combination of this technique, and active data push. Also, I'm sure the above code can be improved a little too.  Specifically things like registering a popup cancelled listener to handle the style reset so that we don't loose the subtle animation that takes place when the popup is opened in that situation where the user has closed the in-fade dialog.

    Read the article

  • Lessons from rewriting POP Forums for MVC, open source-like

    - by Jeff
    It has been a ton of work, interrupted over the last two years by unemployment, moving, a baby, failing to sell houses and other life events, but it's really exciting to see POP Forums v9 coming together. I'm not even sure when I decided to really commit to it as an open source project, but working on the same team as the CodePlex folks probably had something to do with it. Moving along the roadmap I set for myself, the app is now running on a quasi-production site... we launched MouseZoom last weekend. (That's a post-beta 1 build of the forum. There's also some nifty Silverlight DeepZoom goodness on that site.)I have to make a point to illustrate just how important starting over was for me. I started this forum thing for my sites in old ASP more than ten years ago. What a mess that stuff was, including SQL injection vulnerabilities and all kinds of crap. It went to ASP.NET in 2002, but even then, it felt a little too much like script. More than a year later, in 2003, I did an honest to goodness rewrite. If you've been in this business of writing code for any amount of time, you know how much you hate what you wrote a month ago, so just imagine that with seven years in between. The subsequent versions still carried a fair amount of crap, and that's why I had to start over, to make a clean break. Mind you, much of that crap is still running on some of my production sites in a stable manner, but it's a pain in the ass to maintain.So with that clean break, there is much that I have learned. These are a few of those lessons, in no particular order...Avoid shiny object syndromeOver the years, I've embraced new things without bothering to ask myself why. I remember spending the better part of a year trying to adapt this app to use the membership and profile API's in ASP.NET, just because they were there. They didn't solve any known problem. Early on in this version, I dabbled in exotic ORM's, even though I already had the fundamental SQL that I knew worked. I bloated up the client side code with all kinds of jQuery UI and plugins just because, and it got in the way. All the new shiny can be distracting, and I've come to realize that I've allowed it to be a distraction most of my professional life.Just query what you needI've spent a lot of time over-thinking how to query data. In the SQL world, this means exotic joins, special caches, the read-update-commit loop of ORM's, etc. There are times when you have to remind yourself that you aren't Facebook, you'll never be Facebook, and that databases are in fact intended to serve data. In a lot of projects, back in the day, I used to have these big, rich data objects and pass them all over the place, through various application tiers, when in reality, all I needed was some ID from the entity. I try to be mindful of how many queries hit the database on a given request, but I don't obsess over it. I just get what I need.Don't spend too much time worrying about your unit testsIf you've looked at any of the tests for POP Forums, you might offer an audible WTF. That's OK. There's a whole lot of mocking going on. In some cases, it points out where you're doing too much, and that's good for improving your design. In other cases it shows where your design sucks. But the biggest trap of unit testing is that you worry it should be prettier. That's a waste of time. When you write a test, in many cases before the production code, the important part is that you're testing the right thing. If you have to mock up a bunch of stuff to test the outcome, so be it, but it's not wasted time. You're still doing up the typical arrange-action-assert deal, and you'll be able to read that later if you need to.Get back to your HTTP rootsASP.NET Webforms did a reasonably decent job at abstracting us away from the stateless nature of the Web. A lot of people criticize it, but I think it all worked pretty well. These days, with MVC, jQuery, REST services, and what not, we've gone back to thinking about the wire. The nuts and bolts passing between our Web browser and server matters. This doesn't make things harder, in my opinion, it makes them easier. There is something incredibly freeing about how we approach development of Web apps now. HTTP is a really simple protocol, and the stuff we push through it, in particular HTML and JSON, are pretty simple too. The debugging points are really easy to trap and trace.Premature optimization is prematureI'll go back to the data thing for a moment. I've been known to look at a particular action or use case and stress about the number of calls that are made to the database. I'm not suggesting that it's a bad thing to keep these in mind, but if you worry about it outside of the context of the actual impact, you're wasting time. For example, I query the database for last read times in a forum separately of the user and the list of forums. The impact on performance barely exists. If I put it under load, exceeding the kind of load I expect, it still barely has an impact. Then consider it only counts for logged in users. The context of this "inefficient" action is that it doesn't matter. Did I mention I won't be Facebook?Solve your own problems firstThis is another trap I've fallen into. I've often thought about what other people might need for some feature or aspect of the app. In other words, I was willing to make design decisions based on non-existent data. How stupid is that? When I decided to truly open source this thing, building for myself first was a stated design goal. This app has to server the audiences of CoasterBuzz, MouseZoom and other sites first. In this development scenario, you don't have access to mountains of usability studies or user focus groups. You have to start with what you know.I'm sure there are other points I could make too. It has been a lot of fun to work on, and I look forward to evolving the UI as time goes on. That's where I hope to see more magic in the future.

    Read the article

  • Personal Development : Time, Planning , Repairs & Maintenance

    - by Rajesh Pillai
    Personal Development : Time, Planning, Repairs & Maintenance These are just my thoughts, but some you may find something interesting in it. Please think over it. We may know many things, but still we always keeps procrastinating it. I have written this as I have heard many people coming back and saying they don’t have time to do things they like. These are my thoughts buy may be useful to someone else too. Certain things in life needs periodic repairs and maintenance. To cite some examples , your CAR, your HOUSE, your personal laptop/desktop, your health etc. Likewise there are certain other things in professional life that requires repair/ maintenance /or some kind of polishing, so that you always stay on top of it. But they are not always obvious. Some of them are - Improving your communication skills - Increasing your vocabulary - Upgrading your technical skills - Pursuing your hobby - Increasing your knowledge/awareness etc… etc… And then there are certain things that we are always short of…. one is TIME. We all know TIME is one of the most precious things in life and yet we all are very miserable at managing it. Remember you can only manage it and not control it. You can only control which you own or which you create. In theory time is infinite. So, there should be abundant of it. But remember one thing, you know this, it’s not reversible. Once it has elapsed you cannot live it again. Think over it. So, how do find that golden 25th hour every day. To find the 25th hour you need to reflect back on your current daily activities. Analyze them and see where you are spending most of your time and is it really important. Even the 8 hours that you spent in the office, is it spent fruitfully. At the end of the day is the 8 precious hour that you spent was worth it. Just reflect back on your activities. Did you learn something? If yes did you make a point to NOTE IT. If you didn’t NOTED it then was the time you spent really worth it. Just ponder over it. Some calculations of your daily activities where most of the time is spent. Let’s start (in no particular order though) - Sleep (6.5 hours) [Remember you only require 6 good hours of sleep every day]. Some may thing it is 8, but it’s a myth.   o To achive 6 hours of sleep and be in good health you can practice 15 minutes of daily meditation. So effectively you can    round it to 6.5 hours. - Morning chores(2 hours) : Some may need to prepare breakfast and all other things. - Office commuting (avg. to and fro 3 hours) - Office Work (avg 9.5 hours) Total Hours: 21 hours effective time which is spent irrespective of what you do. There may be some variations here and there. Still you have 3 hours EXTRA. Where do these 3 hours go? If you can find it, then you may get that golden 25th hour out of these 3 hours. Let’s discount 2 hours for contingencies, still you have 1 hour with you. If you can’t find it then you are living a direction less life. As you can see, the 25th Hour lies within the 24 hours of the day. It’s upto each one of us to find and make use of it. Now what can you do with that 25th hour i.e. 1 hour extra of your life. Imagine the possibility. Again some calculations 1 hour daily * 30 days = 30 hours every month 30 hours pm * 12 month = 360 hours every year. 360 hours every year seems very promising. Let’s add some contingencies, say, let’s be optimistic and say 50 % contingency. Still you have 180 hours every year. That leaves with 30 minutes every day of extra time. That’s hell a lot of time, if you could manage it. These may sound like a high talk [yes, it is, unless you apply these simple rules and rationalize your everyday living and stop procrastinating]. NOTE: I haven’t taken weekend, holidays and leaves into account. So, that leaves us with a lot of buffer time. You can meet family friends, relatives, other tasks, and yet have these 180 pure hours of joy every year. Do whatever you want to do with it. So, how important is this 180 hours per year to you? Just think over it. You may use it the way you like - 50 hours [pursue your hobby like drawing, crafting, learn dance, learn juggling, learn swimming, travelling hmm.. anything you like doing and you didn’t had time to do it.] - 30 hours you can learn a new programming language or technology (i.e. you can get comfortable with it) - 50 hours [improve existing skills] - 20 hours [improve you communication skill]. Do some light reading. - 30 hours [YOU DECIDE WHAT TO DO]? So, if you had done this for one year you would have learnt a new programming language, upgraded existing skills, improved you communication etc.. If you had done this for two years.. imagine the level of personal development or growth which you may have attained….. If you had done this for three years….. NOW I think I don’t need to mention this… So, you still have TIME, as they say TIME is infinite. So, make judicious use of this precious thing. And never ever comeback saying “I don’t have time”. So, if you are RICH in TIME, everything else will be automatically taken care of, as those things may just be a byproduct of how you spend your time… So, happy TIMING your TIME everyday.

    Read the article

  • 64-bit Archives Needed

    - by user9154181
    A little over a year ago, we received a question from someone who was trying to build software on Solaris. He was getting errors from the ar command when creating an archive. At that time, the ar command on Solaris was a 32-bit command. There was more than 2GB of data, and the ar command was hitting the file size limit for a 32-bit process that doesn't use the largefile APIs. Even in 2011, 2GB is a very large amount of code, so we had not heard this one before. Most of our toolchain was extended to handle 64-bit sized data back in the 1990's, but archives were not changed, presumably because there was no perceived need for it. Since then of course, programs have continued to get larger, and in 2010, the time had finally come to investigate the issue and find a way to provide for larger archives. As part of that process, I had to do a deep dive into the archive format, and also do some Unix archeology. I'm going to record what I learned here, to document what Solaris does, and in the hope that it might help someone else trying to solve the same problem for their platform. Archive Format Details Archives are hardly cutting edge technology. They are still used of course, but their basic form hasn't changed in decades. Other than to fix a bug, which is rare, we don't tend to touch that code much. The archive file format is described in /usr/include/ar.h, and I won't repeat the details here. Instead, here is a rough overview of the archive file format, implemented by System V Release 4 (SVR4) Unix systems such as Solaris: Every archive starts with a "magic number". This is a sequence of 8 characters: "!<arch>\n". The magic number is followed by 1 or more members. A member starts with a fixed header, defined by the ar_hdr structure in/usr/include/ar.h. Immediately following the header comes the data for the member. Members must be padded at the end with newline characters so that they have even length. The requirement to pad members to an even length is a dead giveaway as to the age of the archive format. It tells you that this format dates from the 1970's, and more specifically from the era of 16-bit systems such as the PDP-11 that Unix was originally developed on. A 32-bit system would have required 4 bytes, and 64-bit systems such as we use today would probably have required 8 bytes. 2 byte alignment is a poor choice for ELF object archive members. 32-bit objects require 4 byte alignment, and 64-bit objects require 64-bit alignment. The link-editor uses mmap() to process archives, and if the members have the wrong alignment, we have to slide (copy) them to the correct alignment before we can access the ELF data structures inside. The archive format requires 2 byte padding, but it doesn't prohibit more. The Solaris ar command takes advantage of this, and pads ELF object members to 8 byte boundaries. Anything else is padded to 2 as required by the format. The archive header (ar_hdr) represents all numeric values using an ASCII text representation rather than as binary integers. This means that an archive that contains only text members can be viewed using tools such as cat, more, or a text editor. The original designers of this format clearly thought that archives would be used for many file types, and not just for objects. Things didn't turn out that way of course — nearly all archives contain relocatable objects for a single operating system and machine, and are used primarily as input to the link-editor (ld). Archives can have special members that are created by the ar command rather than being supplied by the user. These special members are all distinguished by having a name that starts with the slash (/) character. This is an unambiguous marker that says that the user could not have supplied it. The reason for this is that regular archive members are given the plain name of the file that was inserted to create them, and any path components are stripped off. Slash is the delimiter character used by Unix to separate path components, and as such cannot occur within a plain file name. The ar command hides the special members from you when you list the contents of an archive, so most users don't know that they exist. There are only two possible special members: A symbol table that maps ELF symbols to the object archive member that provides it, and a string table used to hold member names that exceed 15 characters. The '/' convention for tagging special members provides room for adding more such members should the need arise. As I will discuss below, we took advantage of this fact to add an alternate 64-bit symbol table special member which is used in archives that are larger than 4GB. When an archive contains ELF object members, the ar command builds a special archive member known as the symbol table that maps all ELF symbols in the object to the archive member that provides it. The link-editor uses this symbol table to determine which symbols are provided by the objects in that archive. If an archive has a symbol table, it will always be the first member in the archive, immediately following the magic number. Unlike member headers, symbol tables do use binary integers to represent offsets. These integers are always stored in big-endian format, even on a little endian host such as x86. The archive header (ar_hdr) provides 15 characters for representing the member name. If any member has a name that is longer than this, then the real name is written into a special archive member called the string table, and the member's name field instead contains a slash (/) character followed by a decimal representation of the offset of the real name within the string table. The string table is required to precede all normal archive members, so it will be the second member if the archive contains a symbol table, and the first member otherwise. The archive format is not designed to make finding a given member easy. Such operations move through the archive from front to back examining each member in turn, and run in O(n) time. This would be bad if archives were commonly used in that manner, but in general, they are not. Typically, the ar command is used to build an new archive from scratch, inserting all the objects in one operation, and then the link-editor accesses the members in the archive in constant time by using the offsets provided by the symbol table. Both of these operations are reasonably efficient. However, listing the contents of a large archive with the ar command can be rather slow. Factors That Limit Solaris Archive Size As is often the case, there was more than one limiting factor preventing Solaris archives from growing beyond the 32-bit limits of 2GB (32-bit signed) and 4GB (32-bit unsigned). These limits are listed in the order they are hit as archive size grows, so the earlier ones mask those that follow. The original Solaris archive file format can handle sizes up to 4GB without issue. However, the ar command was delivered as a 32-bit executable that did not use the largefile APIs. As such, the ar command itself could not create a file larger than 2GB. One can solve this by building ar with the largefile APIs which would allow it to reach 4GB, but a simpler and better answer is to deliver a 64-bit ar, which has the ability to scale well past 4GB. Symbol table offsets are stored as 32-bit big-endian binary integers, which limits the maximum archive size to 4GB. To get around this limit requires a different symbol table format, or an extension mechanism to the current one, similar in nature to the way member names longer than 15 characters are handled in member headers. The size field in the archive member header (ar_hdr) is an ASCII string capable of representing a 32-bit unsigned value. This places a 4GB size limit on the size of any individual member in an archive. In considering format extensions to get past these limits, it is important to remember that very few archives will require the ability to scale past 4GB for many years. The old format, while no beauty, continues to be sufficient for its purpose. This argues for a backward compatible fix that allows newer versions of Solaris to produce archives that are compatible with older versions of the system unless the size of the archive exceeds 4GB. Archive Format Differences Among Unix Variants While considering how to extend Solaris archives to scale to 64-bits, I wanted to know how similar archives from other Unix systems are to those produced by Solaris, and whether they had already solved the 64-bit issue. I've successfully moved archives between different Unix systems before with good luck, so I knew that there was some commonality. If it turned out that there was already a viable defacto standard for 64-bit archives, it would obviously be better to adopt that rather than invent something new. The archive file format is not formally standardized. However, the ar command and archive format were part of the original Unix from Bell Labs. Other systems started with that format, extending it in various often incompatible ways, but usually with the same common shared core. Most of these systems use the same magic number to identify their archives, despite the fact that their archives are not always fully compatible with each other. It is often true that archives can be copied between different Unix variants, and if the member names are short enough, the ar command from one system can often read archives produced on another. In practice, it is rare to find an archive containing anything other than objects for a single operating system and machine type. Such an archive is only of use on the type of system that created it, and is only used on that system. This is probably why cross platform compatibility of archives between Unix variants has never been an issue. Otherwise, the use of the same magic number in archives with incompatible formats would be a problem. I was able to find information for a number of Unix variants, described below. These can be divided roughly into three tribes, SVR4 Unix, BSD Unix, and IBM AIX. Solaris is a SVR4 Unix, and its archives are completely compatible with those from the other members of that group (GNU/Linux, HP-UX, and SGI IRIX). AIX AIX is an exception to rule that Unix archive formats are all based on the original Bell labs Unix format. It appears that AIX supports 2 formats (small and big), both of which differ in fundamental ways from other Unix systems: These formats use a different magic number than the standard one used by Solaris and other Unix variants. They include support for removing archive members from a file without reallocating the file, marking dead areas as unused, and reusing them when new archive items are inserted. They have a special table of contents member (File Member Header) which lets you find out everything that's in the archive without having to actually traverse the entire file. Their symbol table members are quite similar to those from other systems though. Their member headers are doubly linked, containing offsets to both the previous and next members. Of the Unix systems described here, AIX has the only format I saw that will have reasonable insert/delete performance for really large archives. Everyone else has O(n) performance, and are going to be slow to use with large archives. BSD BSD has gone through 4 versions of archive format, which are described in their manpage. They use the same member header as SVR4, but their symbol table format is different, and their scheme for long member names puts the name directly after the member header rather than into a string table. GNU/Linux The GNU toolchain uses the SVR4 format, and is compatible with Solaris. HP-UX HP-UX seems to follow the SVR4 model, and is compatible with Solaris. IRIX IRIX has 32 and 64-bit archives. The 32-bit format is the standard SVR4 format, and is compatible with Solaris. The 64-bit format is the same, except that the symbol table uses 64-bit integers. IRIX assumes that an archive contains objects of a single ELFCLASS/MACHINE, and any archive containing ELFCLASS64 objects receives a 64-bit symbol table. Although they only use it for 64-bit objects, nothing in the archive format limits it to ELFCLASS64. It would be perfectly valid to produce a 64-bit symbol table in an archive containing 32-bit objects, text files, or anything else. Tru64 Unix (Digital/Compaq/HP) Tru64 Unix uses a format much like ours, but their symbol table is a hash table, making specific symbol lookup much faster. The Solaris link-editor uses archives by examining the entire symbol table looking for unsatisfied symbols for the link, and not by looking up individual symbols, so there would be no benefit to Solaris from such a hash table. The Tru64 ld must use a different approach in which the hash table pays off for them. Widening the existing SVR4 archive symbol tables rather than inventing something new is the simplest path forward. There is ample precedent for this approach in the ELF world. When ELF was extended to support 64-bit objects, the approach was largely to take the existing data structures, and define 64-bit versions of them. We called the old set ELF32, and the new set ELF64. My guess is that there was no need to widen the archive format at that time, but had there been, it seems obvious that this is how it would have been done. The Implementation of 64-bit Solaris Archives As mentioned earlier, there was no desire to improve the fundamental nature of archives. They have always had O(n) insert/delete behavior, and for the most part it hasn't mattered. AIX made efforts to improve this, but those efforts did not find widespread adoption. For the purposes of link-editing, which is essentially the only thing that archives are used for, the existing format is adequate, and issues of backward compatibility trump the desire to do something technically better. Widening the existing symbol table format to 64-bits is therefore the obvious way to proceed. For Solaris 11, I implemented that, and I also updated the ar command so that a 64-bit version is run by default. This eliminates the 2 most significant limits to archive size, leaving only the limit on an individual archive member. We only generate a 64-bit symbol table if the archive exceeds 4GB, or when the new -S option to the ar command is used. This maximizes backward compatibility, as an archive produced by Solaris 11 is highly likely to be less than 4GB in size, and will therefore employ the same format understood by older versions of the system. The main reason for the existence of the -S option is to allow us to test the 64-bit format without having to construct huge archives to do so. I don't believe it will find much use outside of that. Other than the new ability to create and use extremely large archives, this change is largely invisible to the end user. When reading an archive, the ar command will transparently accept either form of symbol table. Similarly, the ELF library (libelf) has been updated to understand either format. Users of libelf (such as the link-editor ld) do not need to be modified to use the new format, because these changes are encapsulated behind the existing functions provided by libelf. As mentioned above, this work did not lift the limit on the maximum size of an individual archive member. That limit remains fixed at 4GB for now. This is not because we think objects will never get that large, for the history of computing says otherwise. Rather, this is based on an estimation that single relocatable objects of that size will not appear for a decade or two. A lot can change in that time, and it is better not to overengineer things by writing code that will sit and rot for years without being used. It is not too soon however to have a plan for that eventuality. When the time comes when this limit needs to be lifted, I believe that there is a simple solution that is consistent with the existing format. The archive member header size field is an ASCII string, like the name, and as such, the overflow scheme used for long names can also be used to handle the size. The size string would be placed into the archive string table, and its offset in the string table would then be written into the archive header size field using the same format "/ddd" used for overflowed names.

    Read the article

  • DBCC CHECKDB on VVLDB and latches (Or: My Pain is Your Gain)

    - by Argenis
      Does your CHECKDB hurt, Argenis? There is a classic blog series by Paul Randal [blog|twitter] called “CHECKDB From Every Angle” which is pretty much mandatory reading for anybody who’s even remotely considering going for the MCM certification, or its replacement (the Microsoft Certified Solutions Master: Data Platform – makes my fingers hurt just from typing it). Of particular interest is the post “Consistency Options for a VLDB” – on it, Paul provides solid, timeless advice (I use the word “timeless” because it was written in 2007, and it all applies today!) on how to perform checks on very large databases. Well, here I was trying to figure out how to make CHECKDB run faster on a restored copy of one of our databases, which happens to exceed 7TB in size. The whole thing was taking several days on multiple systems, regardless of the storage used – SAS, SATA or even SSD…and I actually didn’t pay much attention to how long it was taking, or even bothered to look at the reasons why - as long as it was finishing okay and found no consistency errors. Yes – I know. That was a huge mistake, as corruption found in a database several days after taking place could only allow for further spread of the corruption – and potentially large data loss. In the last two weeks I increased my attention towards this problem, as we noticed that CHECKDB was taking EVEN LONGER on brand new all-flash storage in the SAN! I couldn’t really explain it, and were almost ready to blame the storage vendor. The vendor told us that they could initially see the server driving decent I/O – around 450Mb/sec, and then it would settle at a very slow rate of 10Mb/sec or so. “Hum”, I thought – “CHECKDB is just not pushing the I/O subsystem hard enough”. Perfmon confirmed the vendor’s observations. Dreaded @BlobEater What was CHECKDB doing all the time while doing so little I/O? Eating Blobs. It turns out that CHECKDB was taking an extremely long time on one of our frankentables, which happens to be have 35 billion rows (yup, with a b) and sucks up several terabytes of space in the database. We do have a project ongoing to purge/split/partition this table, so it’s just a matter of time before we deal with it. But the reality today is that CHECKDB is coming to a screeching halt in performance when dealing with this particular table. Checking sys.dm_os_waiting_tasks and sys.dm_os_latch_stats showed that LATCH_EX (DBCC_OBJECT_METADATA) was by far the top wait type. I remembered hearing recently about that wait from another post that Paul Randal made, but that was related to computed-column indexes, and in fact, Paul himself reminded me of his article via twitter. But alas, our pathologic table had no non-clustered indexes on computed columns. I knew that latches are used by the database engine to do internal synchronization – but how could I help speed this up? After all, this is stuff that doesn’t have a lot of knobs to tweak. (There’s a fantastic level 500 talk by Bob Ward from Microsoft CSS [blog|twitter] called “Inside SQL Server Latches” given at PASS 2010 – and you can check it out here. DISCLAIMER: I assume no responsibility for any brain melting that might ensue from watching Bob’s talk!) Failed Hypotheses Earlier on this week I flew down to Palo Alto, CA, to visit our Headquarters – and after having a great time with my Monkey peers, I was relaxing on the plane back to Seattle watching a great talk by SQL Server MVP and fellow MCM Maciej Pilecki [twitter] called “Masterclass: A Day in the Life of a Database Transaction” where he discusses many different topics related to transaction management inside SQL Server. Very good stuff, and when I got home it was a little late – that slow DBCC CHECKDB that I had been dealing with was way in the back of my head. As I was looking at the problem at hand earlier on this week, I thought “How about I set the database to read-only?” I remembered one of the things Maciej had (jokingly) said in his talk: “if you don’t want locking and blocking, set the database to read-only” (or something to that effect, pardon my loose memory). I immediately killed the CHECKDB which had been running painfully for days, and set the database to read-only mode. Then I ran DBCC CHECKDB against it. It started going really fast (even a bit faster than before), and then throttled down again to around 10Mb/sec. All sorts of expletives went through my head at the time. Sure enough, the same latching scenario was present. Oh well. I even spent some time trying to figure out if NUMA was hurting performance. Folks on Twitter made suggestions in this regard (thanks, Lonny! [twitter]) …Eureka? This past Friday I was still scratching my head about the whole thing; I was ready to start profiling with XPERF to see if I could figure out which part of the engine was to blame and then get Microsoft to look at the evidence. After getting a bunch of good news I’ll blog about separately, I sat down for a figurative smack down with CHECKDB before the weekend. And then the light bulb went on. A sparse column. I thought that I couldn’t possibly be experiencing the same scenario that Paul blogged about back in March showing extreme latching with non-clustered indexes on computed columns. Did I even have a non-clustered index on my sparse column? As it turns out, I did. I had one filtered non-clustered index – with the sparse column as the index key (and only column). To prove that this was the problem, I went and setup a test. Yup, that'll do it The repro is very simple for this issue: I tested it on the latest public builds of SQL Server 2008 R2 SP2 (CU6) and SQL Server 2012 SP1 (CU4). First, create a test database and a test table, which only needs to contain a sparse column: CREATE DATABASE SparseColTest; GO USE SparseColTest; GO CREATE TABLE testTable (testCol smalldatetime SPARSE NULL); GO INSERT INTO testTable (testCol) VALUES (NULL); GO 1000000 That’s 1 million rows, and even though you’re inserting NULLs, that’s going to take a while. In my laptop, it took 3 minutes and 31 seconds. Next, we run DBCC CHECKDB against the database: DBCC CHECKDB('SparseColTest') WITH NO_INFOMSGS, ALL_ERRORMSGS; This runs extremely fast, as least on my test rig – 198 milliseconds. Now let’s create a filtered non-clustered index on the sparse column: CREATE NONCLUSTERED INDEX [badBadIndex] ON testTable (testCol) WHERE testCol IS NOT NULL; With the index in place now, let’s run DBCC CHECKDB one more time: DBCC CHECKDB('SparseColTest') WITH NO_INFOMSGS, ALL_ERRORMSGS; In my test system this statement completed in 11433 milliseconds. 11.43 full seconds. Quite the jump from 198 milliseconds. I went ahead and dropped the filtered non-clustered indexes on the restored copy of our production database, and ran CHECKDB against that. We went down from 7+ days to 19 hours and 20 minutes. Cue the “Argenis is not impressed” meme, please, Mr. LaRock. My pain is your gain, folks. Go check to see if you have any of such indexes – they’re likely causing your consistency checks to run very, very slow. Happy CHECKDBing, -Argenis ps: I plan to file a Connect item for this issue – I consider it a pretty serious bug in the engine. After all, filtered indexes were invented BECAUSE of the sparse column feature – and it makes a lot of sense to use them together. Watch this space and my twitter timeline for a link.

    Read the article

  • Source-control 'wet-work'?

    - by Phil Factor
    When a design or creative work is flawed beyond remedy, it is often best to destroy it and start again. The other day, I lost the code to a long and intricate SQL batch I was working on. I’d thought it was impossible, but it happened. With all the technology around that is designed to prevent this occurring, this sort of accident has become a rare event.  If it weren’t for a deranged laptop, and my distraction, the code wouldn’t have been lost this time.  As always, I sighed, had a soothing cup of tea, and typed it all in again.  The new code I hastily tapped in  was much better: I’d held in my head the essence of how the code should work rather than the details: I now knew for certain  the start point, the end, and how it should be achieved. Instantly the detritus of half-baked thoughts fell away and I was able to write logical code that performed better.  Because I could work so quickly, I was able to hold the details of all the columns and variables in my head, and the dynamics of the flow of data. It was, in fact, easier and quicker to start from scratch rather than tidy up and refactor the existing code with its inevitable fumbling and half-baked ideas. What a shame that technology is now so good that developers rarely experience the cleansing shock of losing one’s code and having to rewrite it from scratch.  If you’ve never accidentally lost  your code, then it is worth doing it deliberately once for the experience. Creative people have, until Technology mistakenly prevented it, torn up their drafts or sketches, threw them in the bin, and started again from scratch.  Leonardo’s obsessive reworking of the Mona Lisa was renowned because it was so unusual:  Most artists have been utterly ruthless in destroying work that didn’t quite make it. Authors are particularly keen on writing afresh, and the results are generally positive. Lawrence of Arabia actually lost the entire 250,000 word manuscript of ‘The Seven Pillars of Wisdom’ by accidentally leaving it on a train at Reading station, before rewriting a much better version.  Now, any writer or artist is seduced by technology into altering or refining their work rather than casting it dramatically in the bin or setting a light to it on a bonfire, and rewriting it from the blank page.  It is easy to pick away at a flawed work, but the real creative process is far more brutal. Once, many years ago whilst running a software house that supplied commercial software to local businesses, I’d been supervising an accounting system for a farming cooperative. No packaged system met their needs, and it was all hand-cut code.  For us, it represented a breakthrough as it was for a government organisation, and success would guarantee more contracts. As you’ve probably guessed, the code got mangled in a disk crash just a week before the deadline for delivery, and the many backups all proved to be entirely corrupted by a faulty tape drive.  There were some fragments left on individual machines, but they were all of different versions.  The developers were in despair.  Strangely, I managed to re-write the bulk of a three-month project in a manic and caffeine-soaked weekend.  Sure, that elegant universally-applicable input-form routine was‘nt quite so elegant, but it didn’t really need to be as we knew what forms it needed to support.  Yes, the code lacked architectural elegance and reusability. By dawn on Monday, the application passed its integration tests. The developers rose to the occasion after I’d collapsed, and tidied up what I’d done, though they were reproachful that some of the style and elegance had gone out of the application. By the delivery date, we were able to install it. It was a smaller, faster application than the beta they’d seen and the user-interface had a new, rather Spartan, appearance that we swore was done to conform to the latest in user-interface guidelines. (we switched to Helvetica font to look more ‘Bauhaus’ ). The client was so delighted that he forgave the new bugs that had crept in. I still have the disk that crashed, up in the attic. In IT, we have had mixed experiences from complete re-writes. Lotus 123 never really recovered from a complete rewrite from assembler into C, Borland made the mistake with Arago and Quattro Pro  and Netscape’s complete rewrite of their Navigator 4 browser was a white-knuckle ride. In all cases, the decision to rewrite was a result of extreme circumstances where no other course of action seemed possible.   The rewrite didn’t come out of the blue. I prefer to remember the rewrite of Minix by young Linus Torvalds, or the rewrite of Bitkeeper by a slightly older Linus.  The rewrite of CP/M didn’t do too badly either, did it? Come to think of it, the guy who decided to rewrite the windowing system of the Xerox Star never regretted the decision. I’ll agree that one should often resist calls for a rewrite. One of the worst habits of the more inexperienced programmer is to denigrate whatever code he or she inherits, and then call loudly for a complete rewrite. They are buoyed up by the mistaken belief that they can do better. This, however, is a different psychological phenomenon, more related to the idea of some motorcyclists that they are operating on infinite lives, or the occasional squaddies that if they charge the machine-guns determinedly enough all will be well. Grim experience brings out the humility in any experienced programmer.  I’m referring to quite different circumstances here. Where a team knows the requirements perfectly, are of one mind on methodology and coding standards, and they already have a solution, then what is wrong with considering  a complete rewrite? Rewrites are so painful in the early stages, until that point where one realises the payoff, that even I quail at the thought. One needs a natural disaster to push one over the edge. The trouble is that source-control systems, and disaster recovery systems, are just too good nowadays.   If I were to lose this draft of this very blog post, I know I’d rewrite it much better. However, if you read this, you’ll know I didn’t have the nerve to delete it and start again.  There was a time that one prayed that unreliable hardware would deliver you from an unmaintainable mess of a codebase, but now technology has made us almost entirely immune to such a merciful act of God. An old friend of mine with long experience in the software industry has long had the idea of the ‘source-control wet-work’,  where one hires a malicious hacker in some wild eastern country to hack into one’s own  source control system to destroy all trace of the source to an application. Alas, backup systems are just too good to make this any more than a pipedream. Somehow, it would be difficult to promote the idea. As an alternative, could one construct a source control system that, on doing all the code-quality metrics, would systematically destroy all trace of source code that failed the quality test? Alas, I can’t see many managers buying into the idea. In reading the full story of the near-loss of Toy Story 2, it set me thinking. It turned out that the lucky restoration of the code wasn’t the happy ending one first imagined it to be, because they eventually came to the conclusion that the plot was fundamentally flawed and it all had to be rewritten anyway.  Was this an early  case of the ‘source-control wet-job’?’ It is very hard nowadays to do a rapid U-turn in a development project because we are far too prone to cling to our existing source-code.

    Read the article

  • Azure Diagnostics: The Bad, The Ugly, and a Better Way

    - by jasont
    If you’re a .Net web developer today, no doubt you’ve enjoyed watching Windows Azure grow up over the past couple of years. The platform has scaled, stabilized (mostly), and added on a slew of great (and sometimes overdue) features. What was once just an endpoint to host a solution, developers today have tremendous flexibility and options in the platform. Organizations are building new solutions and offerings on the platform, and others have, or are in the process of, migrating existing applications out of their own data centers into the Azure cloud. Whether new application development or migrating legacy, every development shop and IT organization needs to monitor their applications in the cloud, the same as they do on premises. Azure Diagnostics has some capabilities, but what I constantly hear from users is that it’s either (a) not enough, or (b) too cumbersome to set up. Today, Stackify is happy to announce that we fully support Azure deployments, just the same as your on-premises deployments. Let’s take a look below and compare and contrast the options. Azure Diagnostics Let’s crack open the Windows Azure documentation on Azure Diagnostics and see just how easy it is to use. The high level steps are:   Step 1: Import the Diagnostics Oh, I’ve already deployed my app without the diagnostics module. Guess I can’t do anything until I do this and re-deploy. Step 2: Configure the Diagnostics (and multiple sub-steps) Do I want it all? Or just pieces of it? Whoops, forgot to include a specific performance counter, I guess I’ll have to deploy again. Wait a minute… I have to specifically code these performance counters into my role’s OnStart() method, compile and deploy again? And query and consume it myself? Step 3: (Optional) Permanently store diagnostic data Lucky for me, Azure storage has gotten pretty cheap. But how often should I move the data into storage? I want to see real-time data, so I guess that’s out now as well. Step 4: (Optional) View stored diagnostic data Optional? Of course I want to see it. Conveniently, Microsoft recommends 3 tools to do this with. Un-conveniently, none of these are web based and they all just give you access to raw data, and very little charting or real-time intelligence. Just….. data. Nevermind that one product seems to have gotten stale since a recent acquisition, and doesn’t even have screenshots!   So, let’s summarize: lots of diagnostics data is available, but think realistically. Think Dev Ops. What happens when you are in the middle of a major production performance issue and you don’t have the diagnostics you need? You are redeploying an application (and thankfully you have a great branching strategy, so you feel perfectly safe just willy-nilly launching code into prod, don’t you?) to get data, then shipping it to storage, and then digging through that data to find a needle in a haystack. Would you like to be able to troubleshoot a performance issue in the middle of the night, or on a weekend, from your iPad or home computer’s web browser? Forget it: the best you get is this spark line in the Azure portal. If it’s real pointy, you probably have an issue; but since there is no alert based on a threshold your customers have likely already let you know. And high CPU, Memory, I/O, or Network doesn’t tell you anything about where the problem is. The Better Way – Stackify Stackify supports application and server monitoring in real time, all through a great web interface. All of the things that Azure Diagnostics provides, Stackify provides for your on-premises deployments, and you don’t need to know ahead of time that you’ll need it. It’s always there, it’s always on. Azure deployments are essentially no different than on-premises. It’s a Windows Server (or Linux) in the cloud. It’s behind a different firewall than your corporate servers. That’s it. Stackify can provide the same powerful tools to your Azure deployments in two simple steps. Step 1 Add a startup task to your web or worker role and deploy. If you can’t deploy and need it right now, no worries! Remote Desktop to the Azure instance and you can execute a Powershell script to download / install Stackify.   Step 2 Log in to your account at www.stackify.com and begin monitoring as much as you want, as often as you want and see the results instantly. WMI? It’s there Event Viewer? You’ve got it. File System Access? Yes, please! Would love to make sure my web.config is correct.   IIS / App Pool Info? Yep. You can even restart it. Running Services? All of them. Start and Stop them to your heart’s content. SQL Database access? You bet’cha. Alerts and Notification? Of course! You should know before your customers let you know. … and so much more.   Conclusion Microsoft has shown, consistently, that they love developers, developers, developers. What every developer needs to realize from this is that they’ve given you a canvas, which is exactly what Azure is. It’s great infrastructure that is readily available, easy to manage, and fairly cost effective. However, the tooling is your responsibility. What you get, at best, is bare bones. App and server diagnostics should be available when you need them. While we, as developers, try to plan for and think of everything ahead of time, there will come times where we need to get data that just isn’t available. And having to go through a lot of cumbersome steps to get that data, and then have to find a friendlier way to consume it…. well, that just doesn’t make a lot of sense to me. I’d rather spend my time writing and developing features and completing bug fixes for my applications, than to be writing code to monitor and diagnose.

    Read the article

  • Down Tools Week Cometh: Kissing Goodbye to CVs/Resumes and Cover Letters

    - by Bart Read
    I haven't blogged about what I'm doing in my (not so new) temporary role as Red Gate's technical recruiter, mostly because it's been routine, business as usual stuff, and because I've been trying to understand the role by doing it. I think now though the time has come to get a little more radical, so I'm going to tell you why I want to largely eliminate CVs/resumes and cover letters from the application process for some of our technical roles, and why I think that might be a good thing for candidates (and for us). I have a terrible confession to make, or at least it's a terrible confession for a recruiter: I don't really like CV sifting, or reading cover letters, and, unless I've misread the mood around here, neither does anybody else. It's dull, it's time-consuming, and it's somewhat soul destroying because, when all is said and done, you're being paid to be incredibly judgemental about people based on relatively little information. I feel like I've dirtied myself by saying that - I mean, after all, it's a core part of my job - but it sucks, it really does. (And, of course, the truth is I'm still a software engineer at heart, and I'm always looking for ways to do things better.) On the flip side, I've never met anyone who likes writing their CV. It takes hours and hours of faffing around and massaging it into shape, and the whole process is beset by a gnawing anxiety, frustration, and insecurity. All you really want is a chance to demonstrate your skills - not just talk about them - and how do you do that in a CV or cover letter? Often the best candidates will include samples of their work (a portfolio, screenshots, links to websites, product downloads, etc.), but sometimes this isn't possible, or may not be appropriate, or you just don't think you're allowed because of what your school/university careers service has told you (more commonly an issue with grads, obviously). And what are we actually trying to find out about people with all of this? I think the common criteria are actually pretty basic: Smart Gets things done (thanks for these two Joel) Not an a55hole* (sorry, have to get around Simple Talk's swear filter - and thanks to Professor Robert I. Sutton for this one) *Of course, everyone has off days, and I don't honestly think we're too worried about somebody being a bit grumpy every now and again. We can do a bit better than this in the context of the roles I'm talking about: we can be more specific about what "gets things done" means, at least in part. For software engineers and interns, the non-exhaustive meaning of "gets things done" is: Excellent coder For test engineers, the non-exhaustive meaning of "gets things done" is: Good at finding problems in software Competent coder Team player, etc., to me, are covered by "not an a55hole". I don't expect people to be the life and soul of the party, or a wild extrovert - that's not what team player means, and it's not what "not an a55hole" means. Some of our best technical staff are quiet, introverted types, but they're still pleasant to work with. My problem is that I don't think the initial sift really helps us find out whether people are smart and get things done with any great efficacy. It's better than nothing, for sure, but it's not as good as it could be. It's also contentious, and potentially unfair/inequitable - if you want to get an idea of what I mean by this, check out the background information section at the bottom. Before I go any further, let's look at the Red Gate recruitment process for technical staff* as it stands now: (LOTS of) People apply for jobs. All these applications go through a brutal process of manual sifting, which eliminates between 75 and 90% of them, depending upon the role, and the time of year**. Depending upon the role, those who pass the sift will be sent an assessment or telescreened. For the purposes of this blog post I'm only interested in those that are sent some sort of programming assessment, or bug hunt. This means software engineers, test engineers, and software interns, which are the roles for which I receive the most applications. The telescreen tends to be reserved for project or product managers. Those that pass the assessment are invited in for first interview. This interview is mostly about assessing their technical skills***, although we're obviously on the look out for cultural fit red flags as well. If the first interview goes well we'll invite candidates back for a second interview. This is where team/cultural fit is really scoped out. We also use this interview to dive more deeply into certain areas of their skillset, and explore any concerns that may have come out of the first interview (these obviously won't have been serious or obvious enough to cause a rejection at that point, but are things we do need to look into before we'd consider making an offer). We might subsequently invite them in for lunch before we make them an offer. This tends to happen when we're recruiting somebody for a specific team and we'd like them to meet all the people they'll be working with directly. It's not an interview per se, but can prove pivotal if they don't gel with the team. Anyone who's made it this far will receive an offer from us. *We have a slightly quirky definition of "technical staff" as it relates to the technical recruiter role here. It includes software engineers, test engineers, software interns, user experience specialists, technical authors, project managers, product managers, and development managers, but does not include product support or information systems roles. **For example, the quality of graduate applicants overall noticeably drops as the academic year wears on, which is not to say that by now there aren't still stars in there, just that they're fewer and further between. ***Some organisations prefer to assess for team fit first, but I think assessing technical skills is a more effective initial filter - if they're the nicest person in the world, but can't cut a line of code they're not going to work out. Now, as I suggested in the title, Red Gate's Down Tools Week is upon us once again - next week in fact - and I had proposed as a project that we refactor and automate the first stage of marking our programming assessments. Marking assessments, and in fact organising the marking of them, is a somewhat time-consuming process, and we receive many assessment solutions that just don't make the cut, for whatever reason. Whilst I don't think it's possible to fully automate marking, I do think it ought to be possible to run a suite of automated tests over each candidate's solution to see whether or not it behaves correctly and, if it does, move on to a manual stage where we examine the code for structure, decomposition, style, readability, maintainability, etc. Obviously it's possible to use tools to generate potentially helpful metrics for some of these indices as well. This would obviously reduce the marking workload, and would provide candidates with quicker feedback about whether they've been successful - though I do wonder if waiting a tactful interval before sending a (nicely written) rejection might be wise. I duly scrawled out a picture of my ideal process, which looked like this: The problem is, as soon as I'd roughed it out, I realised that fundamentally it wasn't an ideal process at all, which explained the gnawing feeling of cognitive dissonance I'd been wrestling with all week, whilst I'd been trying to find time to do this. Here's what I mean. Automated assessment marking, and the associated infrastructure around that, makes it much easier for us to deal with large numbers of assessments. This means we can be much more permissive about who we send assessments out to or, in other words, we can give more candidates the opportunity to really demonstrate their skills to us. And this leads to a question: why not give everyone the opportunity to demonstrate their skills, to show that they're smart and can get things done? (Two or three of us even discussed this in the down tools week hustings earlier this week.) And isn't this a lot simpler than the alternative we'd been considering? (FYI, this was automated CV/cover letter sifting by some form of textual analysis to ideally eliminate the worst 50% or so of applications based on an analysis of the 20,000 or so historical applications we've received since 2007 - definitely not the basic keyword analysis beloved of recruitment agencies, since this would eliminate hardly anyone who was awful, but definitely would eliminate stellar Oxbridge candidates - #fail - or some nightmarishly complex Google-like system where we profile all our currently employees, only to realise that we're never going to get representative results because we don't have a statistically significant sample size in any given role - also #fail.) No, I think the new way is better. We let people self-select. We make them the masters (or mistresses) of their own destiny. We give applicants the power - we put their fate in their hands - by giving them the chance to demonstrate their skills, which is what they really want anyway, instead of requiring that they spend hours and hours creating a CV and cover letter that I'm going to evaluate for suitability, and make a value judgement about, in approximately 1 minute (give or take). It doesn't matter what university you attended, it doesn't matter if you had a bad year when you took your A-levels - here's your chance to shine, so take it and run with it. (As a side benefit, we cut the number of applications we have to sift by something like two thirds.) WIN! OK, yeah, sounds good, but will it actually work? That's an excellent question. My gut feeling is yes, and I'll justify why below (and hopefully have gone some way towards doing that above as well), but what I'm proposing here is really that we run an experiment for a period of time - probably a couple of months or so - and measure the outcomes we see: How many people apply? (Wouldn't be surprised or alarmed to see this cut by a factor of ten.) How many of them submit a good assessment? (More/less than at present?) How much overhead is there for us in dealing with these assessments compared to now? What are the success and failure rates at each interview stage compared to now? How many people are we hiring at the end of it compared to now? I think it'll work because I hypothesize that, amongst other things: It self-selects for people who really want to work at Red Gate which, at the moment, is something I have to try and assess based on their CV and cover letter - but if you're not that bothered about working here, why would you complete the assessment? Candidates who would submit a shoddy application probably won't feel motivated to do the assessment. Candidates who would demonstrate good attention to detail in their CV/cover letter will demonstrate good attention to detail in the assessment. In general, only the better candidates will complete and submit the assessment. Marking assessments is much less work so we'll be able to deal with any increase that we see (hopefully we will see). There are obviously other questions as well: Is plagiarism going to be a problem? Is there any way we can detect/discourage potential plagiarism? How do we assess candidates' education and experience? What about their ability to communicate in writing? Do we still want them to submit a CV afterwards if they pass assessment? Do we want to offer them the opportunity to tell us a bit about why they'd like the job when they submit their assessment? How does this affect our relationship with recruitment agencies we might use to hire for these roles? So, what's the objective for next week's Down Tools Week? Pretty simple really - we want to implement this process for the Graduate Software Engineer and Software Engineer positions that you can find on our website. I will be joined by a crack team of our best developers (Kevin Boyle, and new Red-Gater, Sam Blackburn), and recruiting hostess with the mostest Laura McQuillen, and hopefully a couple of others as well - if I can successfully twist more arms before Monday.* Hopefully by next Friday our experiment will be up and running, and we may have changed the way Red Gate recruits software engineers for good! Stay tuned and we'll let you know how it goes! *I'm going to play dirty by offering them beer and chocolate during meetings. Some background information: how agonising over the initial CV/cover letter sift helped lead us to bin it off entirely The other day I was agonising about the new university/good degree grade versus poor A-level results issue, and decided to canvas for other opinions to see if there was something I could do that was fairer than my current approach, which is almost always to reject. This generated quite an involved discussion on our Yammer site: I'm sure you can glean a pretty good impression of my own educational prejudices from that discussion as well, although I'm very open to changing my opinion - hopefully you've already figured that out from reading the rest of this post. Hopefully you can also trace a logical path from agonising about sifting to, "Uh, hang on, why on earth are we doing this anyway?!?" Technorati Tags: recruitment,hr,developers,testers,red gate,cv,resume,cover letter,assessment,sea change

    Read the article

  • Not attending the LUGM mini-meetup - 05. Oct 2013

    Not attending a meeting of the LUGM can be fun, too. It's getting a bit of a habit that Ish is organising small gatherings, aka mini-meetups, of the Linux User Group Mauritius/Meta (LUGM) almost every Saturday. There they mainly discuss and talk about various elements of using Linux as ones main operating systems and the possibilities you are going to have. On top of course, some tips & tricks about mastering the command line and initial steps in scripting or even writing HTML. In general, sounds like a good portion of fun and great spirit of community. Unfortunately, I'm usually quite busy with private and family matters during the weekend and so I already signalised that I wouldn't be around. Well, at least not physically... But this Saturday a couple of things worked out faster than expected and so I was hanging out on my machine. I made virtual contact with one of Pawan's messages over on Facebook... And somehow that kicked off some kind of an online game fun on basic configuration of Apache HTTPd 2.2.x, PHP 5.x and how to improve the overall performance of a newly installed blog based on WordPress. Default configuration files Nitin's website finally came alive and despite the dark theme and the hidden Apple 'fanboy' advertisement I was more interested in the technical situation. As with any new installation there is usually quite some adjustment to be done. And Nitin's page was no exception. Unfortunately, out of the box installations of Apache httpd and PHP are too verbose and expose too much information under the hood. You might think that this isn't really a problem at all, well, think about it again after completely reading this article. First, I checked the HTTP response headers - using either Chrome Developer Tools or Firefox Web Developer extension - of Nitin's page and based on that I advised him to lower the noise levels a little bit. It's not really necessary that detailed information about web server software and scripting language has to be published in every response made. Quite a number of script kiddies and exploits actually check for version specifics prior to an attack. So, removing at least version details hardens the system a little bit. In particular, I'm talking about these response values: Server X-Powered-By How to achieve that? By tweaking the configuration files... Namely, we are going to look into the following ones: apache2.conf httpd.conf .htaccess php.ini The above list contains some additional files, I'm talking about in the next paragraphs. Anyway, those are the ones involved. Tweaking Apache Open your favourite text editor and start to modify the apache2.conf. Eventually, you might like to have a quick peak at the file to see whether it is necessary to adjust it or not. Following is a handy combination of commands to get an overview of your active directives: # sudo grep -v '#' /etc/apache2/apache2.conf | grep -v '^$' | less There you keep an eye on those two Apache directives: ServerSignature Off ServerTokens Prod If that's not the case, change them as highlighted above. In order to activate your modifications you have to restart Apache httpd server. On Debian and Ubuntu you might use apache2ctl for that, on other distributions you might have to use service or run the init-scripts again: # sudo apache2ctl configtestSyntax OK# sudo apache2ctl restart Refresh your website and check the HTTP response header. Tweaking PHP5 (a little bit) Next, check your php.ini file with the following statement: # sudo grep -v ';' /etc/php5/apache2/php.ini | grep -v '^$' | less And check the value of expose_php = Off Again, if it's not as highlighted, change it... Some more Apache love Okay, back to Apache it might also be interesting to improve the situation about browser caching and removing more obsolete information. When you run your website against the usual performance checks like Google Page Speed and Yahoo YSlow you might see those check points with bad grades on a standard, default configuration. Well, this can be done easily. Configure entity tags (ETags) ETags are only interesting when you run your websites on a farm of multiple web servers. Removing this data for your static resources is very simple in Apache. As we are going to deal with the HTTP response header information you have to ensure that Apache is capable to manipulate them. First, check your enabled modules: # sudo ls -al /etc/apache2/mods-enabled/ | grep headers And in case that the 'headers' module is not listed, you have to enable it from the available ones: # sudo a2enmod headers Second, check your httpd.conf file (in case it exists): # sudo grep -v '#' /etc/apache2/httpd.conf | grep -v '^$' | less In newer (better said fresh) installations you might have to create a new configuration file below your conf.d folder with your favourite text editor like so: # sudo nano /etc/apache2/conf.d/headers.conf Then, in order to tweak your HTTP responses either check for those lines or add them: Header unset ETagFileETag None In case that your file doesn't exist or those lines are missing, feel free to create/add them. Afterwards, check your Apache configuration syntax and restart your running instances as already shown above: # sudo apache2ctl configtestSyntax OK# sudo apache2ctl restart Add Expires headers To improve the loading performance of your website, you should take some care into the proper configuration of how to leverage the browser's ability to cache certain resources and files. This is done by adding an Expires: value to the HTTP response header. Generally speaking it is advised that you specify a near-future, read: 1 week or a little bit more, for your static content like JavaScript files or Cascading Style Sheets. One solution to adjust this is to put some instructions into the .htaccess file in the root folder of your web site. Of course, this could also be placed into a more generic location of your Apache installation but honestly, I'd like to keep this at the web site level. Following some adjustments I'm currently using on this blog site: # Turn on Expires and set default to 0ExpiresActive OnExpiresDefault A0 # Set up caching on media files for 1 year (forever?)<FilesMatch "\.(flv|ico|pdf|avi|mov|ppt|doc|mp3|wmv|wav)$">ExpiresDefault A29030400Header append Cache-Control "public"</FilesMatch> # Set up caching on media files for 1 week<FilesMatch "\.(js|css)$">ExpiresDefault A604800Header append Cache-Control "public"</FilesMatch> # Set up caching on media files for 31 days<FilesMatch "\.(gif|jpg|jpeg|png|swf)$">ExpiresDefault A2678400Header append Cache-Control "public"</FilesMatch> As we are editing the .htaccess files, it is not necessary to restart Apache. In case that your web site doesn't load anymore or you're experiencing an error while trying to restart your httpd, check that the 'expires' module is actually an enabled module: # ls -al /etc/apache2/mods-enabled/ | grep expires# sudo a2enmod expires Of course, the instructions above a re not feature complete but I hope that they might provide a better default configuration for your LAMP stack. Resume of the day Within a couple of hours, and while being occupied with an eLearning course on SQL Server 2012, I had some good fun in helping and assisting other LUGM members while they were some kilometers away at Bagatelle. According to other blog articles it seems that Nitin had quite some moments of desperation. Just for the records: At no time it was my intention to either kick his butt or pull a leg on him. Simply, providing some input based on the lessons I've learned over the last couple of years configuring Apache HTTPd and PHP. Check out the other blogs, too: LUGM mini-meetup... Epic! Superb Saturday Linux Meetup And last but not least, the man himself: The end of a new beginning Cheers, and happy community'ing! Updates Due to our weekly Code & Coffee sessions in the MSCC community, I had a chance to talk to Nitin directly and he showed me the problems directly on his machine. This led to update this article hence the paragraphs on enabling the modules 'headers' and 'expires'.

    Read the article

  • Source-control 'wet-work'?

    - by Phil Factor
    When a design or creative work is flawed beyond remedy, it is often best to destroy it and start again. The other day, I lost the code to a long and intricate SQL batch I was working on. I’d thought it was impossible, but it happened. With all the technology around that is designed to prevent this occurring, this sort of accident has become a rare event.  If it weren’t for a deranged laptop, and my distraction, the code wouldn’t have been lost this time.  As always, I sighed, had a soothing cup of tea, and typed it all in again.  The new code I hastily tapped in  was much better: I’d held in my head the essence of how the code should work rather than the details: I now knew for certain  the start point, the end, and how it should be achieved. Instantly the detritus of half-baked thoughts fell away and I was able to write logical code that performed better.  Because I could work so quickly, I was able to hold the details of all the columns and variables in my head, and the dynamics of the flow of data. It was, in fact, easier and quicker to start from scratch rather than tidy up and refactor the existing code with its inevitable fumbling and half-baked ideas. What a shame that technology is now so good that developers rarely experience the cleansing shock of losing one’s code and having to rewrite it from scratch.  If you’ve never accidentally lost  your code, then it is worth doing it deliberately once for the experience. Creative people have, until Technology mistakenly prevented it, torn up their drafts or sketches, threw them in the bin, and started again from scratch.  Leonardo’s obsessive reworking of the Mona Lisa was renowned because it was so unusual:  Most artists have been utterly ruthless in destroying work that didn’t quite make it. Authors are particularly keen on writing afresh, and the results are generally positive. Lawrence of Arabia actually lost the entire 250,000 word manuscript of ‘The Seven Pillars of Wisdom’ by accidentally leaving it on a train at Reading station, before rewriting a much better version.  Now, any writer or artist is seduced by technology into altering or refining their work rather than casting it dramatically in the bin or setting a light to it on a bonfire, and rewriting it from the blank page.  It is easy to pick away at a flawed work, but the real creative process is far more brutal. Once, many years ago whilst running a software house that supplied commercial software to local businesses, I’d been supervising an accounting system for a farming cooperative. No packaged system met their needs, and it was all hand-cut code.  For us, it represented a breakthrough as it was for a government organisation, and success would guarantee more contracts. As you’ve probably guessed, the code got mangled in a disk crash just a week before the deadline for delivery, and the many backups all proved to be entirely corrupted by a faulty tape drive.  There were some fragments left on individual machines, but they were all of different versions.  The developers were in despair.  Strangely, I managed to re-write the bulk of a three-month project in a manic and caffeine-soaked weekend.  Sure, that elegant universally-applicable input-form routine was‘nt quite so elegant, but it didn’t really need to be as we knew what forms it needed to support.  Yes, the code lacked architectural elegance and reusability. By dawn on Monday, the application passed its integration tests. The developers rose to the occasion after I’d collapsed, and tidied up what I’d done, though they were reproachful that some of the style and elegance had gone out of the application. By the delivery date, we were able to install it. It was a smaller, faster application than the beta they’d seen and the user-interface had a new, rather Spartan, appearance that we swore was done to conform to the latest in user-interface guidelines. (we switched to Helvetica font to look more ‘Bauhaus’ ). The client was so delighted that he forgave the new bugs that had crept in. I still have the disk that crashed, up in the attic. In IT, we have had mixed experiences from complete re-writes. Lotus 123 never really recovered from a complete rewrite from assembler into C, Borland made the mistake with Arago and Quattro Pro  and Netscape’s complete rewrite of their Navigator 4 browser was a white-knuckle ride. In all cases, the decision to rewrite was a result of extreme circumstances where no other course of action seemed possible.   The rewrite didn’t come out of the blue. I prefer to remember the rewrite of Minix by young Linus Torvalds, or the rewrite of Bitkeeper by a slightly older Linus.  The rewrite of CP/M didn’t do too badly either, did it? Come to think of it, the guy who decided to rewrite the windowing system of the Xerox Star never regretted the decision. I’ll agree that one should often resist calls for a rewrite. One of the worst habits of the more inexperienced programmer is to denigrate whatever code he or she inherits, and then call loudly for a complete rewrite. They are buoyed up by the mistaken belief that they can do better. This, however, is a different psychological phenomenon, more related to the idea of some motorcyclists that they are operating on infinite lives, or the occasional squaddies that if they charge the machine-guns determinedly enough all will be well. Grim experience brings out the humility in any experienced programmer.  I’m referring to quite different circumstances here. Where a team knows the requirements perfectly, are of one mind on methodology and coding standards, and they already have a solution, then what is wrong with considering  a complete rewrite? Rewrites are so painful in the early stages, until that point where one realises the payoff, that even I quail at the thought. One needs a natural disaster to push one over the edge. The trouble is that source-control systems, and disaster recovery systems, are just too good nowadays.   If I were to lose this draft of this very blog post, I know I’d rewrite it much better. However, if you read this, you’ll know I didn’t have the nerve to delete it and start again.  There was a time that one prayed that unreliable hardware would deliver you from an unmaintainable mess of a codebase, but now technology has made us almost entirely immune to such a merciful act of God. An old friend of mine with long experience in the software industry has long had the idea of the ‘source-control wet-work’,  where one hires a malicious hacker in some wild eastern country to hack into one’s own  source control system to destroy all trace of the source to an application. Alas, backup systems are just too good to make this any more than a pipedream. Somehow, it would be difficult to promote the idea. As an alternative, could one construct a source control system that, on doing all the code-quality metrics, would systematically destroy all trace of source code that failed the quality test? Alas, I can’t see many managers buying into the idea. In reading the full story of the near-loss of Toy Story 2, it set me thinking. It turned out that the lucky restoration of the code wasn’t the happy ending one first imagined it to be, because they eventually came to the conclusion that the plot was fundamentally flawed and it all had to be rewritten anyway.  Was this an early  case of the ‘source-control wet-job’?’ It is very hard nowadays to do a rapid U-turn in a development project because we are far too prone to cling to our existing source-code.

    Read the article

  • Alcatel-Lucent: Enterprise 2.0: The Top 5 Things I would Do Over

    - by Kellsey Ruppel
    Happy Monday! Does anyone else feel as if the weekend went entirely too quickly? At least for those of us in the United States, we have the 4th of July Holiday next week to look forward to This week on the blog, we are going to focus on "WebCenter by Example" and highlight best practices from customers and partners. I recently came across this article and I think this is a great example of how we can learn from one another when it comes to social collaboration adoption. Do you agree with Jem? What things or best practices have you learned in your organizations?  By Jem Janik, Enterprise community manager, Alcatel-Lucent  Not so long ago, Engage, the Alcatel-Lucent employee social network and collaboration platform, celebrated its third birthday. With more than 25,000 members actively interacting each month, Engage has been a big enough success that it’s been the subject of external articles, and often those of us who helped launch it will go out and speak about what aspects contributed to that success. Hindsight is still 20/20 and what it takes to successfully launch an enterprise 2.0 community is fairly well-known now.  Today I want to tell you what I suspect you really want to know about.  As the enterprise community manager for Engage, after three years in, what are the top 5 things I wish we (and I mostly mean me) could do over? #5 Define your analytics solution from the start There is so much to do when you launch a community and initially growing it without complete chaos is quite a task.  It doesn’t take too long to get to a point where you want to focus your continued efforts in growing company collaboration.  Do people truly talk across regional boundaries or have we shifted siloed conversations to a new platform.  Is there one organization that doesn’t interact with another? If you are lucky you’ll have someone in your community team well versed in the world of databases and SQL queries, but it takes time to figure out what backend analytics data actually means. Professional support can be expensive and it may be hard to justify later as it typically has the community manager as the only main customer.  Figure out what you think you’ll want to know and how to get it early on. The sooner the better even if it doesn’t seem that critical at the time. #4 Lobbies guide you to the right places One piece of feedback that comes up more and more as we keep growing Engage is it’s hard to find stuff, or new people are not sure where to start. Something we’re doing now is defining some general topic areas of interest to be like “lobbies” into the platform and some common hashtags to go with them. I liken this to walking into a large medical or professional building for the first time.  There are hundreds of offices, and you look to a sign in the lobby to get guided to the right place for you.  We’re building that sign for members now, but again we missed the boat as the majority of the company has had their initial Engage experience. #3 Clean up, clean up, clean up Knowledge work and folksonomies are messy! The day we opened the doors to Engage I would have said we should keep everything ever created in Engage with an argument that it was a window into our collective knowledge so nothing should go.  Well, 6000+ groups and 200,000+ pieces of content later, I’ve changed my mind.  As previously mentioned, with too much “stuff” the system can be overwhelming to new members and it makes it harder to get what you’re looking for.   Do we need that help document about a tool we no longer have? NO!  Do we need that group that had 1 document and 2 discussions in the last two years? NO! Should we only have one group about a given topic instead of 4?  YES! Last fall, Engage defined a cleanup process for groups not used for a long time.  We also formed a volunteer cleaning army who are extra eyes on the hunt for “stuff” that should be updated, merged, or deleted.  It’s better late than never, but in line with what’s becoming a theme I wish these efforts had started earlier. #2 Communications & local community management One of the most important aspects of my job is to make sure people who should be talking to each other are actually doing it.  Connecting people to the other people they should know, the groups they should join, a piece of content that shouldn’t be missed.   I have worked both inside and outside of communications teams, and they are the best informed people in your company.  They know when something big is coming, how it impacts employees, how it fits with strategy, who else knows more, etc.  Having communications professionals who are power users can help scale up community management because they are already so well connected.  They also need to have the platform skills to pay attention without suffering email overload, how to grab someone’s attention, etc.  I wish I’d had figured this out much earlier.  If I had I would have groomed more communications colleagues into advocates and power members right at the start. #1 Grooming advocates vs. natural advocates I’ve just alluded to this above already. The very best advocates are those who naturally embrace your platform and automatically start to see new ways to work within it.  Those advocates seem to come out of the woodwork naturally since some of them are early adopters.  Not surprisingly, our best advocates today are those same people who were willing to come kick the tires when the community was completely empty.  Unfortunately, we didn’t get a global spread of those natural advocates.  I did ask around when we first launched for other people who might be good candidates, but didn’t push too hard as there were so many other things to get ready.  That was a mistake.  If I could get a redo I would have formally asked for people to be assigned where there were gaps and groomed them into an advocate.  Today as we find new advocates to fill the gaps, people are hesitant as the initial set has three years of practice are ahead of the curve power members; it definitely would have been easier earlier on. As fairly early adopters to corporate scale enterprise collaboration, there hasn’t been a roadmap to follow as we’ve grown Engage, which is part of the fun! It’s clear a lot of issues are more easily tackled the earlier you identify and begin to correct them, and I’ve identified the main five I wish I could redo.  In the spirit of collaboration, I hope someone else learns from my mistakes! View the original article by Jem here. 

    Read the article

  • Differences between KVR16N11H/8 and KVR16N11/8 memory except for height?

    - by rzetterberg
    I accidentally ordered KVR16N11/8 instead of KVR16N11H/8 and I'm wondering if I'm going to have compability issues with my Intel DP67DE motherboard. When searching for compatible RAM on Kingstons site for that motherboard the KVR16N11H/8 RAM was one of the compatible ones. The KVR16N11/8 did not show up as compatible for that motherboard. The only difference I can see is that they have different physical height, or am I missing something?

    Read the article

  • PHP Network Monitoring

    - by Vlad Patrascu
    Is there a way that I can monitor the traffic, Upload/Download (separately) using PHP? I`d like to echo out something like that: Upload: 523 GB | Download: 25 GB This should be based on the System Uptime, so if I restart the computer, the count should restart. Thanks in Advance.

    Read the article

  • What is thnuclnt, vmware

    - by Viktor
    Hi, after starting vmware, i noticed that there are more 10 processes called 'thnuclnt'. they're listening on the port 4000. (since i use this port for something else, it's annoying) I'm wondering what this is, since i didn’t find anything about it. I use Mac 10.5.8 with VMware Fusion 2.0.2 thx and best, Viktor

    Read the article

  • Should I switch my server to Ubuntu Server from Windows Server 2003

    - by user22162
    I have a server thats primarily used for SRCDS, I host a few Team Fortress 2 servers on it and I would much prefer a ssh-like (more so the no-gui part) for something like this, mostly because I can't navigate with my phone on VNC very well and also because there really is no need for a gui in this situation. I sort of want to make the switch but I am unsure, because my server 2003 is very fast and If I do need to reboot, it can reboot in under 30 seconds to desktop. Should I switch?

    Read the article

  • Public free time server

    - by JL.
    I need to get the current datetime from a reliable source, because its likely that the local system time could be changed. Is it possible to get this from an internet time server, one that has close to 100% uptime, preferably via a webservice method, something that is free, and I have to stress absolutely reliable? I would hope an offering from Microsoft, or the organisation responsible for keeping global time.

    Read the article

  • How can I make Webalizer work with rolling apache logs?

    - by Simon
    I am using Webalizer to view my site stats, and it's working ok with one exception; I have log rolling configured so my log directory looks something like this: :/var/log/apache2$ ls access.log access.log.1 access.log.2.gz access.log.3.gz ... Webalizer ends up only storing the last ~4 days each time it runs, so I only ever get a rolling window of stats rather than the full month. How can I make Webalizer process the full set of logs?

    Read the article

  • Time Service will not start on Windows Server - System error 1290

    - by paradroid
    I have been trying to sort out some time sync issues involving two domain controllers and seem to have ended up with a bigger problem. It's horrible. They are both virtual machines (one being on Amazon EC2), which I think may complicate things regarding time servers. The primary DC with all the FSMO roles is on the LAN. I reset its time server configuration like this (from memory): net stop w32time w23tm /unregister shutdown /r /t 0 w32tm /register w32tm /config /manualpeerlist:”0.uk.pool.ntp.org,1.uk.pool.ntp.org,2.uk.pool.ntp.org,3.uk.pool.ntp.org” /syncfromflags:manual /reliable:yes /update W32tm /config /update net start w32time reg QUERY HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\W32Time\Config /v AnnounceFlags I checked to see if it was set to 0x05, which it was. The output for... w32tm /query /status Leap Indicator: 0(no warning) Stratum: 1 (primary reference - syncd by radio clock) Precision: -6 (15.625ms per tick) Root Delay: 0.0000000s Root Dispersion: 10.0000000s ReferenceId: 0x4C4F434C (source name: "LOCL") Last Successful Sync Time: 10/04/2012 15:03:27 Source: Local CMOS Clock Poll Interval: 6 (64s) While this was not what was intended, I thought I would sort it out after I made sure that the remote DC was syncing with it first. On the Amazon EC2 remote replica DC (Windows Server 2008 R2 Core)... net stop w32time w32tm /unregister shutdown /r /t 0 w32time /register net start w32time This is where it all goes wrong System error 1290 has occurred. The service start failed since one or more services in the same process have an incompatible service SID type setting. A service with restricted service SID type can only coexist in the same process with other services with a restricted SID type. If the service SID type for this service was just configured, the hosting process must be restarted in order to start this service. I cannot get the w32time service to start. I've tried resetting the time settings and tried to reverse what I have done. The Ec2Config service cannot start either, as it depends on the w32time service. All the solutions I have seen involve going into the telephony service registry settings, but as it is Server Core, it does not have that role, and I cannot see the relationship between that and the time service. w32time runs in the LocalService group and this telephony service which does not exist on Core runs in the NetworkService group. Could this have something to do with the process (svchost.exe) not being able to be run as a domain account, as it now a domain controller, but originally it ran as a local user group, or something like that? There seem to be a lot of cases of people having this problem, but the only solution has to do with the (non-existant on Core) telephony service. Who even uses that?

    Read the article

  • I need help debugging apache with gdb (no debugging symbols found)

    - by blockhead
    I'm trying to debug a segfault in PHP/Apache running on RHEL4. This is a production server, so I'm trying to install a separate copy of apache and php, and run apache through gdb. When I load httpd through gdb and then do run -X, I get the error (no debugging symbols found)...Error while reading shared library symbols: Dwarf Error: Cannot handle DW_FORM_strp in DWARF reader. The Apache manual says something about setting EXTRA_CFLAGS to "-g", and i've tried configuring with --enable-maintainer-mode, but I don't seem to be getting far.

    Read the article

  • SQL Server Licensing in a VMware vSphere Cluster

    - by Helvick
    If I have SQL Server 2008 instances running in virtual machines on a VMware vSphere cluster with vMotion\DRS enabled so that the VM's can (potentially) run on any one of the physical servers in the cluster what precisely are the license requirements? For example assume that I have 4 physical ESX Hosts with dual physical CPU's and 3 separate single vCPU Virtual Machines running SQL Server 2008 running in that cluster. How many SQL Standard Processor licenses would I need? Is it 3 (one per VM) or 12 (one per VM on each physical host) or something else? How many SQL Enterprise Processor licenses would I need? Is it 3 (one per VM) or 8 (one for each physical CPU in the cluster) or, again, something else? The range in the list prices for these options goes from $17k to $200k so getting it right is quite important. Bonus question: If I choose the Server+CAL licensing model do I need to buy multiple Server instance licenses for each of the ESX hosts (so 12 copies of the SQL Server Standard server license so that there are enough licenses on each host to run all VM's) or again can I just license the VM and what difference would using Enterprise per server licensing make? Edited to Add Having spent some time reading the SQL 2008 Licensing Guide (63 Pages! Includes Maps!*) I've come across this: • Under the Server/CAL model, you may run unlimited instances of SQL Server 2008 Enterprise within the server farm, and move those instances freely, as long as those instances are not running on more servers than the number of licenses assigned to the server farm. • Under the Per Processor model, you effectively count the greatest number of physical processors that may support running instances of SQL Server 2008 Enterprise at any one time across the server farm and assign that number of Processor licenses And earlier: ..For SQL Server, these rule changes apply to SQL Server 2008 Enterprise only. By my reading this means that for my 3 VM's I only need 3 SQL 2008 Enterprise Processor Licenses or one copy of Server Enterprise + CALs for the cluster. By implication it means that I have to license all processors if I choose SQL 2008 Standard Processor licensing or that I have to buy a copy of SQL Server 2008 Standard for each ESX host if I choose to use CALs. *There is a map to demonstrate that a Server Farm cannot extend across an area broader than 3 timezones unless it's in the European Free Trade Area, I wasn't expecting that when I started reading it.

    Read the article

  • Power cycles on/off 3 times before booting properly from cold start, no other issues (New System)

    - by James
    Relevant Specs: Sapphire 5850, core i7 920, Seasonic x750 power supply, ECS X58B-A2 mobo. From a cold boot, meaning all power totally disconnected at the wall, the system will power on for less than a second and then power off completely. After two seconds of being powered off this will repeat and on the third "attempt" the computer will boot. To be very specific here is what happens: The power is turned on at the wall and on the psu, the orange stdby LED on the mobo is illuminated but the system is 'off'. I hit the power button on the case or on the mobo itself I hear the relay (?) in the psu closing The case light comes on and the mobo power light comes on. The fans start rotating. Immediately after this the I hear some relay click - the power lights extinguish, the fans stop, the stdby light remains on. Less than 2 seconds pass and the cycle repeats without any intervention from me. On the third attempt it boots normally and the machine runs perfectly. If I do a soft reboot or a full shutdown the computer starts normally the next time. It's only if I pull the power cord or flick the switch off on the PSU that I get the cycling again. Basically any time the stdby light on the mobo goes out. I have removed the graphics card and I get the same problem. I have removed the PSU, hotwired it to the ON position and verified voltages on all lines. The relay does not cycle when I do this. If I connect only the 24 pin ATX connector to the mobo and not the 8 pin ATX12V / CPU connector then I will not get the cycling, the fans run, the power light stays on, but obviously the system can't boot. Disconnecting all fans has no effect on the problem. My feeling it that it's something to do with the motherboard like a capacitor that's taking a long time to charge because it's leaking or something along those lines. But I can't imagine what could be 'wrong' with it and only manifest itself as a problem under these very specific circumstances. Any ideas? Thanks.

    Read the article

< Previous Page | 379 380 381 382 383 384 385 386 387 388 389 390  | Next Page >