Search Results

Search found 25963 results on 1039 pages for 'ask for recommendation'.

Page 384/1039 | < Previous Page | 380 381 382 383 384 385 386 387 388 389 390 391  | Next Page >

  • How to install Netgear N-300 UAB adapter WNA3100 on Ubuntu 12.04

    - by JacobusR
    After a fresh install of Ubuntu 12.04, the first thing I'm trying to do, is to setup my wireless adapter. I can see it using lsusb: beer@beer-linux:~$ lsusb ... Bus 002 Device 006: ID 0846:9020 NetGear, Inc. WNA3100(v1) Wireless-N 300 [Broadcom BCM43231] ... I have found a lot of dated instructions on the net and just wanted to know what the right way is to set it up on 12.04. I don't want to mess up a brand new install by tweaking things that don't need tweaking. According to most posts, you have to install the Windows drivers using the ndiswrapper package. Is this still the right way to go? If so, it would be great if someone could write down the steps to do this under 12.04

    Read the article

  • How USB drives goes after system hard drives

    - by raihanchy
    I am using Ubuntu 12.04 LTS. My hard drives usually comes as: sda, with 'sudo blkid' and if I plug-in any USB drive, they comes as: sdb, sdc etc; after sda. That's fine!!! But problem arises after I restart my laptop with connecting those USB drives. They alter and comes first and hard drive goes to the end, like: 'sudo blkid' shows, sda, sdb for USB drives and sdc for hard drives. It's making problem to mount with /etc/fstab. I couldn't find any solutions for this. I would like to have any USB drives after my system hard drives, as in Windows. Please, help me at this point. Thanking you. Raihan

    Read the article

  • One of my user accounts logs in without desktop environment

    - by Bill Cheatham
    When I log in to my main user account on Ubuntu 11.10 ,the desktop environment (unity bar, clock, volume control, etc.) is not there. All I have is the desktop background with a menu bar across the top which appears to be for nautilus (options like File-New folder). My other accounts log in like normal. I have recently followed these instructions to give my main user account access to an OSX partition, but I think I have logged in successfully since then. I am able to get a terminal by pressing ctrl+alt+t, but when I typed unity the whole thing crashed. Is there anything I can do to fix this? I have a separate administrator account I can use if needed.

    Read the article

  • GPG Invalid Signature

    - by user46421
    I am having problems with the following (in an attempt to remove hyperlinks, I have removed one of the "/" from the addresses): W: GPG error: http://archive.ubuntu.com oneiric Release: The following signatures were invalid: BADSIG 40976EAF437D05B5 Ubuntu Archive Automatic Signing Key <[email protected]> W: GPG error: http://ppa.launchpad.net oneiric Release: The following signatures were invalid: BADSIG B725097B3ACC3965 Launchpad lffl W: GPG error: http://ppa.launchpad.net oneiric Release: The following signatures were invalid: BADSIG 4874D3686E80C6B7 Launchpad PPA for Banshee Team W: GPG error: http://archive.getdeb.net jaunty-getdeb Release: The following signatures were invalid: BADSIG A8A515F046D7E7CF GetDeb Archive Automatic Signing Key <[email protected]> W: GPG error: http://badgerports.org lucid Release: The following signatures were invalid: BADSIG C90F9CB90E1FAD0C Jo Shields <[email protected]> W: GPG error: http://ppa.launchpad.net oneiric Release: The following signatures were invalid: BADSIG 976B5901365C5CA1 Launchpad PPA for transmissionbt W: Failed to fetch http://ppa.launchpad.net/dlecan/openjdk/ubuntu/dists/oneiric/main/source/Sources 404 Not Found W: Failed to fetch http://ppa.launchpad.net/dlecan/openjdk/ubuntu/dists/oneiric/main/binary-i386/Packages 404 Not Found W: Failed to fetch http://ppa.launchpad.net/sevenmachines/flash/ubuntu/dists/oneiric/main/binary-i386/Packages 404 Not Found W: Failed to fetch http://ppa.launchpad.net/sun-java-community-team/sun-java6/ubuntu/dists/oneiric/main/source/Sources 404 Not Found W: Failed to fetch http://ppa.launchpad.net/sun-java-community-team/sun-java6/ubuntu/dists/oneiric/main/binary-i386/Packages 404 Not Found I have tried the following solutions which were in a closed case titled "The following signatures were invalid": First of all try sudo apt-get clean sudo apt-get update && sudo apt-get upgrade Some ISPs cache the packages and errors like these are reported then. If the above commands don't work, try sudo apt-get update -o Acquire::http::No-Cache=True and again sudo apt-get update && sudo apt-get upgrade If it still doesn't work, sudo apt-get update -o Acquire::BrokenProxy=true sudo apt-get update && sudo apt-get upgrade

    Read the article

  • Why is the file /var/crash/_usr_lib_empathy_empathy-chat.1000.upload empty?

    - by user43816
    I just experienced an unusual crash: I tried to click on a name entry in the contact list of Empathy. A crash happened. Usually I am asked then if I'd like to report the error to Launchpad, and Launchpad opens. This time the error message was: "Excuse me. Ubuntu 12.04 noticed an internal error. If you notice further problems try to restart your computer. Send an error report to Launchpad to help removing this problem?" This time Launchpad did not open automatically. A new window opened and I could read the relevant error report. Later I found the error report in the file /var/crash/_usr_lib_empathy_empathy-chat.1000.crash. Why went the course of action this time differently from other crashes? Why is the file /var/crash/_usr_lib_empathy_empathy-chat.1000.upload empty?

    Read the article

  • Does Ubuntu run well on an USB HDD?

    - by Klaus
    I have here a company notebook, and because the HDD is full encrypted, I cannot install an extra partition for another system that I would like to use in my free time. And I really need another system, because this crap Windows here with that much of anti-virus, anti-spyware, anti-whatever on it is so slow and annoying. What can I do? I could use an external USB HDD with another system. Because I would like to handle big files and so on, I don't want to use a USB stick. A USB 2.5 HDD + Ubuntu is what I think the best option. Here are my questions: Do I have to note something? Does Ubuntu run well on an external HDD? Do I have big performance problems (because of the USB HDD)? Should I buy a very fast HDD for much money or it is not that important? Any suggestions?

    Read the article

  • How do I disable changing proxy settings?

    - by gap
    I've got several machines, running 14.04.1, for kids to access. Each machine has accounts for each kid, as well accounts for several adults. Although I've set a system wide proxy use policy, it doesn't get used by Chrome. Instead, I had to log into each kids account and set a proxy use policy, pointing to tinyproxy/dansguardian, for safe internet access. The problem is that, should the kids get an ounce of computer savvy, they'll figure out that they can launch the proxy settings config panel from Unity, then change the proxy settings to None, and completely bypass the "safe" internet scheme I've setup. Can anyone tell me how I can disable those user accounts from being able to modify their proxy settings (not the "system wide" ones... those arent used.. this is the per-user settings). Thanks

    Read the article

  • How to display Ubuntu in the Windows Boot Menu?

    - by Jesse Ramos
    I have Windows 7 and Ubuntu 13.10 dual-boot. I have been trying to figure out a way to make Windows boot menu the only boot menu that comes up. I used EasyBCD to add an option to boot into Ubuntu from the Windows boot menu, but I would like to make it so that the GRUB screen doesn't show up when I select the Ubuntu option. I couldn't get it to work using GRUB Customizer. Anything I can try using those two programs or anything else?

    Read the article

  • Find directories that DON'T contain a file but YES another one

    - by muixca
    I have quite a large music collection and would like to find the directories in which I still have compressed files (*.rar) unprocessed. Hence looking for a command that lists directories in which i do NOT have *.flac or *.mp3 but YES *.rar present. Working off found examples in this post: Find directories that DON'T contain a file I tried: comm -3 \ <(find ~/Music/ -iname "*.rar" -not -iname "*.flac" -not -iname "*.mp3" -printf '%h\n' | sort -u) \ <(find ~/Music/ -maxdepth 5 -mindepth 2 -type d | sort) \ | sed 's/^.*Music\///' but don' work.

    Read the article

  • Power button missing

    - by Christophe De Troyer
    An almost clean install of Ubuntu 13.10 keeps hiding the power button. I noticed before that my clock and power button were missing in the right top corner. I rebooted my system and they were back. Now I see my power button only is missing. How do I go about fixing this? I can't keep rebooting, can I? The latest thing I did was removing Ubuntu One: Removing Ubuntu One I don't think I did something that might've tinkered with these settings though.

    Read the article

  • How to install the translations for trac

    - by julien
    I have installed trac on my server running Ubuntu 12.04. The problem is that the users cannot change the language in their preferences. Instead, the following message is displayed: Translations are currently unavailable. Trac has been localized to more than a dozen of languages but in order to be able to use them, the Babel package needs to be present when installing Trac. See TracInstall for details. The installation has been done using the repositories of Ubuntu, but I could not find any package related to trac and babel, nor trac and anything related to internationalization. How can I install the translations for trac?

    Read the article

  • Ubuntu 12.04 resolution issue ATI radeon x1600

    - by JP Hellemons
    I have a brand new Ubuntu 12.04 installation, but my resolution is set to 800*600 4:3 and my resolution using windows xp is 1440*900 but that option is unavailable for me. When I search for restricted drivers, there are none. So I searched the ati website and downloaded a .run file of about 80 mb. but that gave me an error when I tried to open it. I downloaded some fglrx thing from the repositories and now there are some widescreen options available but still no 1440*900 there is some ATI controlpanel installed, but when I try to open it, it fails telling me that there is now suitable driver. ps. my video card is a 512MB ATI Radeon Sapphire X1600 AGP

    Read the article

  • Is there an easy way to configure an Ubuntu system to function as a proxy/file server from behind an NAT?

    - by amol.kamath
    Sorry for the long question, but the situation/desire is quite complex. Here is my setup: I have a laptop which I carry around everywhere and I have a desktop sitting at home, connected to the internet through a router using NAT. My objective is to create a connection from my laptop to my desktop that can allow me to (in order of priority): Use the desktop as a proxy server Access files on the desktop remotely Control said desktop from the laptop using VNC or similar. Now here is the scene. I have already looked up and tried several ways to achieve the above goals. Teamviewer - I used it and didn't like it. This is not an option. SSH - This seems ideal, I have figured a way to use this for both proxy and file sharing. However, I am currently unable to connect it due to the NAT. I have a separate thread trying to get that to work here. VPN - I've figured out how to use this method for proxy, but not file sharing. However this faces the same problem as the above: I can't get it to connect through the NAT. Does anyone have any other solutions for what I want? Otherwise, if there are solutions to connecting through the NAT, please tell me (in the other thread). Thanks

    Read the article

  • Difficulty Mounting Volumes on a Partitioned External HD

    - by Todd
    I'm having a great deal of difficulty with an external hard drive. I'm currently running a dual boot system (XP Service Pack 3 and Ubuntu 11.04 Natty Narwahl) on a Dell Inspiron B120. I'm trying to set up a new 80 GB Hitachi external HD. Using GParted, I formatted the drive and set up the partitions. The partitioning scheme is as follows 10GB NTFS Primary, 2GB Linux-Swap Primary, 50GB FAT32 Primary, 12GB Unallocated. After applying those changes, I went into Disk Utility and the HD appears along with the correct partitions. When I try to mount the volumes for partitions 1 and 3, I get a pop-up stating: Error Mounting Volume An error occurred while performing an operation on "Home" (Partition 3 of HTS548080m9AT00): The daemon is being inhibited. When I try to to check the filesystem I get a pop-up stating: Error Checking filesystem on volume An error occurred while performing an operation on "Home" (Partition 3 of HTS548080m9AT00): The daemon is being inhibited. Throughout the time that I'm attempting to troubleshoot the problem, the external drive light is on and blinking. With my frustration hitting a boiling point, I try to shut down the drive and remove it so that I can plug in a different external HD that works PERFECTLY. However, when I try to shut down and safely remove the drive, I get a pop-up stating: Error Detaching Drive An error occurred while performing an operation on "80GB Hard Disk" (HTS548080m9AT00): The daemon is being inhibited. Can anyone tell me what I'm doing wrong? I'm a newbie and not that skilled with terminal commands, so please dumb it down for me if you request specific command output.

    Read the article

  • 11.10 runs really choppy and slow, but not if I choose "Gnome Classic"

    - by Ingram
    I'd like to use Unity with Ubuntu 11.10, but everything from Unity runs really choppy and slow. I have an ATI graphics card and I have installed the drivers through "Additional Drivers". The drivers work, as I can play 3d games flawlessly. When I drag the mouse box around or drag windows around, it is really choppy. I previously had Ubuntu 10.10 and everything worked fine. I installed gnome 3 on 11.10 and it does the same thing Unity does, very choppy and slow graphics. However, if I choose Gnome Classic, everything is fine. I can drag the mouse box all around with no problems. I can drag windows around and it looks and feels great. Is this a bug with Unity? Are others experiencing this? Or is there something I can do to fix this?

    Read the article

  • Inkscape won't open .cdr files

    - by Bora George
    Hello I'm running Kubuntu 12.04 and I've installed Inkscape because I need to edit a .cdr file, Inkscape works like normal but the sole task I need it to do is edit said .cdr file which I understand it should be capable off by default. Whenever I try to open the file though I get the following error: UniConvertor failed: The eror itself is longer but what it seems to be saying that it can't find this application, and I myself haven't found it in the package manager. If someone has experienced something similar or has a simple solution for editing cdr's I'm no artist I just need to change some names, I would be very gratefull. The full error.

    Read the article

  • How do I access the preferences from my main dialog window? Also how do I add a new preference?

    - by Captain_Glen
    class PreferencesCalorieBurnerDialog(PreferencesDialog): __gtype_name__ = "PreferencesCalorieBurnerDialog" def finish_initializing(self, builder): # pylint: disable=E1002 """Set up the preferences dialog""" super(PreferencesCalorieBurnerDialog, self).finish_initializing(builder) # Bind each preference widget to gsettings settings = Gio.Settings("net.launchpad.calorie-burner") widget = self.builder.get_object('example_entry') settings.bind("example", widget, "text", Gio.SettingsBindFlags.DEFAULT) #Custom preference widget = self.builder.get_object('weight') settings.bind("weight", widget, "float", Gio.SettingsBindFlags.DEFAULT) Main Dialog self.PreferencesDialog.get_weight()???

    Read the article

  • Unity Desktop not loading and ccsm method not working

    - by slimy-spork
    I installed Ubuntu 13.04 x86_64 on my HP Pavillion DV7-6c60us. It installs fine and works until I update. I run the software updater and reboot as it requests after. When my computer comes back on I get the desktop background but the rest of the Unity desktop doesn't load. I've tried the ccsm method and re-enabling but it just de-enables itself. I've also tried installing the gnome desktop but that does nothing for me either. I really want to switch to Ubuntu but this is causing issues. P.S. I've also tried using 12.10 and 12.04 with no dice.

    Read the article

  • How to run Android Applications in Eclipse?

    - by Raahul
    my system is Dell Inspiron 15R (N5010) and i am having trouble becuase of 64 bit system. on running Android Application i am getting error: Error executing aapt. Please check aapt is present at /home/rahul/android-sdks/platform-tools/aapt before this error i was getting adb not found error. i tried to install ia32-libs but can't. i also put my question here (How to install ia32-lib on 64 Bit System?) but nothing helped. please help !!

    Read the article

  • Why does running this program on 11.10 give a 'GLIBC_2.15 not found' error?

    - by RafLance
    I am trying to install Absinthe 2.0.4 on Ubuntu 11.10 on a netbook. When I try to run the install file, this keeps on happening: rafael@RafLaptop:~/Desktop/absinthe-linux-2.0.4$ ./absinthe.x86 ./absinthe.x86: /lib/i386-linux-gnu/libc.so.6: version `GLIBC_2.15' not found (required by ./absinthe.x86) Do I need to upgrade GLIBC? If so, how do I do that? Since I'm on a netbook I can't use a LiveCD so I wanted to know if there was a way I could fix this issue without reinstalling my whole OS. Any explanations about what GLIBC is exactly would be great too since this is a learning experience for me. I know that GLIBC is a part of libc.so.6 and so I tried to run sudo apt-get install libc.so.6 but was told that it was up to date. But GLIBC isn't? I hope this articulates my problem well, if there are any pieces of missing info or questions to clarity my question, please let me know! ~-~ EDIT/UPDATE: So after some help on the AskUbuntu chat room from user izx, I have gathered the following information/understanding: -I need to run this program with Ubuntu 12.04 or recompile it from source -Upgrading libc on Oneiric to 2.15 while possible, is not an easy task and is not officially supported.

    Read the article

  • DHCP-server doesn't start at boot because of wrong startup order

    - by stolsvik
    Apparently the isc-dhcp-server is started too early in the boot sequence, it states that it has nothing to do. If I just log directly in as root and start it using the init.d-script, it starts normally. My setup is basically an utterly standard router, with an eth0 on the inet side, and an eth1 on the lan side. However, I've defined a bridge instead of the eth1 for the lan-side. Thus, the lan-part of the network isn't up until the bridge is up. I currently believe that the dhcp server is brought up before the bridge is brought up, probably because the bridge is brought up with the 'networking' task, while the eth's are taken up with the 'network-interface' tasks - which are run earlier. (also, the bridge takes a small age to get up compared to the eth's). If I do take away the bridge config, instead using eth1 directly for the lan side, things work. (However, judging by syslog, things are still tight.) Ideas of how the get DHCP to start later? (The reason for the bridge, is to be able to use KVM with bridged networking..)

    Read the article

  • When will we get Sandy Bridge support?

    - by Gu3miles
    I'd like to build a machine running Ubuntu and using the new Sandy bridge (i5 2500 specifically) intel cpu's. I heard that 10.10 doesn't have the best support (or simply won't work) with the new cpus and 1155 mobos. I'm assuming that 11.04 will have support but do the alpha's have it already? Or will I have to wait? Also, I plan to use the onboard Intel graphics (H67 mobo), will there be support for this or will I still need to use a graphic's card?

    Read the article

  • Cannot Install Wine Windows platform loader both from Terminal and software Center

    - by Muhammad Mansoor
    I recently installed Ubuntu 13.04 on my PC. I want to install Microsoft Visual Studio 2010, so I tried to install WINE. I tried to install from the Terminal and from the Software Center. Both times, it failed in the middle of process. This is the error. W:Failed to fetch http://pk.archive.ubuntu.com/ubuntu/dists/raring/main/source/Sources 404 Not Found W:Failed to fetch http://pk.archive.ubuntu.com/ubuntu/dists/raring/restricted/source/Sources 404 Not Found E:Some index files failed to download. They have been ignored, or old ones used instead. How can I fix this?

    Read the article

  • VLC doesnot play any file [ any video/.mp3] in local machine , closes when a file is opened

    - by hsemarap
    When I run vlc from terminal I get: In the VLC dialog box: Your input can't be opened: VLC is unable to open the MRL 'file:///media/Ent/movies/the%20mask.avi'. Check the log for details. In terminal: VLC media player 2.0.1 Twoflower (revision 2.0.1-0-gf432547) [0x8fe8f8] main input error: open of `file/xspf-open:///home/para/.local/share/vlc/ml.xspf' failed [0x8fe8f8] main input error: Your input can't be opened [0x8fe8f8] main input error: VLC is unable to open the MRL 'file/xspf-open:///home/para/.local/share/vlc/ml.xspf'. Check the log for details. [0x8f1aa8] main interface error: no suitable interface module [0x8f9b08] main interface error: no suitable interface module [0x8be008] main libvlc error: option http-user-agent does not exist [0x8be008] main libvlc: Running vlc with the default interface. Use 'cvlc' to use vlc without interface. [0x8f9b08] qt4 interface error: Unable to load extensions module [0x7f5280000b78] main input error: open of `file:///media/Ent/movies/the%20mask.avi' failed [0x8fc718] main playlist error: could not export playlist

    Read the article

  • Cloning a dual boot system from HDD to SSD

    - by Alex
    I'm planning on replacing my laptop's HDD with a 256GB SSD, but I have a dual-boot (12.04 and Windows 7) setup and I'd like to be able to directly migrate Ubuntu over without having to reinstall and lose all of my settings. GParted reports the following partition setup on my HDD. I am, of course, able to modify it if necessary. /dev/sda1 (NTFS) 66.92 out of 200.00 MB used I'm honestly not sure what this partition is for. Maybe for Windows 7 system files? I'm hesitant to mess with it. (edit; it turns out it is a partition for Windows recovery files in the event of OS corruption, so I don't want to remove it. Plus it also appears to be a major pain to remove anyways) /dev/sda2 (NTFS) 116.35 out of 339.06 GB used (boot) This partition is the C:/ drive on my Windows installation. I don't use it on my Ubuntu installation, except it is the boot partition and thus has grub on it. /dev/sda4 (extended) > /dev/sda5 (ext4) 14.49 out of 91.34 GB used > /dev/sda6 (linux-swap) 5.92 GB These are my Ubuntu partitions. /sda5 contains my documents and all of the files I use on Ubuntu, and (as far as I know) the system files for Ubuntu itself (it's the partition I created when prompted by the Live-DVD installer). /sda6 is, of course, the swap partition which I only need for hibernation (6GB of RAM). /dev/sda3 (NTFS) 9.89 out of 14.75 GB used This is an annoying partition that Lenovo created to store some drivers and files that I might need later on. For example, it allows me to use OneKeyRecovery for a quick factory recovery if absolutely necessary, not sure if that'll work on an SSD. It also contains not-so-important files for bloatware installation. In total, my HDD only has about 150GB of files on it so it should fit comfortably on the SSD. The problem is, I want to exactly migrate my files, partitions, OSes, MBR, etc. from my HDD to my SSD and I'm not quite sure how to do this. I've seen CloneZilla referenced before, but I'm not all too experienced and the documentation for it quite frankly seems a bit like a foreign language to me. So, put simply, is there any way I can exactly clone this HDD to an SSD without a massive headache? Also, if it matters, I'll probably be using an external hard drive case (as recommended in online tutorials) to externally attach the SSD to my laptop during the cloning process due to the lack of two hard drive slots in the machine.

    Read the article

< Previous Page | 380 381 382 383 384 385 386 387 388 389 390 391  | Next Page >