Search Results

Search found 12666 results on 507 pages for 'knowledge base'.

Page 384/507 | < Previous Page | 380 381 382 383 384 385 386 387 388 389 390 391  | Next Page >

  • Why does Android allocate more memory than needed when loading images

    - by Simon
    Folks, I don't think that this is a duplicate and is NOT one of those how do I avoid OOMs questions. This is a genuine quest for knowledge so hold off on those down votes please... Imagine I have a JPEG of 500x500 pixels. I load it as ARGB_8888 which is as "bad as it gets". I would expect Android to allocate 500x500x4 bytes = a little under 1MB however, look at a heap dump and you will see that Android allocates significantly more, often factors of 5-10 times greater. You frequently see questions on here about OOMS where the stack trace shows a heap request of say 15MB and it is ALWAYS much larger than is required simply to hold the bytes of the image. The OP usually catches some downvotes then is bombarded with stock answers and comments about using less memory (thanks Romain!) and in scaling. I think there is more than meets the eye here. Anybody know why this is? If there is no apparent answer, I will put together an SSCCE if it helps. PS. I assume that JPEG vs PNG etc is irrelevant since we're talking about the memory usage of the backing bitmap which is simply x times y times BPP - or am I being slow?

    Read the article

  • Are UTF16 (as used by for example wide-winapi functions) characters always 2 byte long?

    - by Cray
    Please clarify for me, how does UTF16 work? I am a little confused, considering these points: There is a static type in C++, WCHAR, which is 2 bytes long. (always 2 bytes long obvisouly) Most of msdn and some other documentation seem to have the assumptions that the characters are always 2 bytes long. This can just be my imagination, I can't come up with any particular examples, but it just seems that way. There are no "extra wide" functions or characters types widely used in C++ or windows, so I would assume that UTF16 is all that is ever needed. To my uncertain knowledge, unicode has a lot more characters than 65535, so they obvisouly don't have enough space in 2 bytes. UTF16 seems to be a bigger version of UTF8, and UTF8 characters can be of different lengths. So if a UTF16 character not always 2 bytes long, how long else could it be? 3 bytes? or only multiples of 2? And then for example if there is a winapi function that wants to know the size of a wide string in characters, and the string contains 2 characters which are each 4 bytes long, how is the size of that string in characters calculated? Is it 2 chars long or 4 chars long? (since it is 8 bytes long, and each WCHAR is 2 bytes)

    Read the article

  • C# Retrieving Data From XML File

    - by Christopher MacKinnon
    I seem to be having a problem with retrieving XML values with C#, which I know it is due to my very limited knowledge of C# and .XML. I was given the following XML file <PowerBuilderRunTimes> <PowerBuilderRunTime> <Version>12</Version> <Files> <File>EasySoap110.dll</File> <File>exPat110.dll</File> <File>pbacc110.dll</File> </File> </PowerBuilderRunTime> </PowerBuilderRunTimes> I am to process the XML file and make sure that each of the files in the exist in the folder (that's the easy part). It's the processing of the XML file that I have having a hard time with. Here is what I have done thus far: var runtimeXml = File.ReadAllText(string.Format("{0}\\{1}", configPath, Resource.PBRuntimes)); var doc = XDocument.Parse(runtimeXml); var topElement = doc.Element("PowerBuilderRunTimes"); var elements = topElement.Elements("PowerBuilderRunTime"); foreach (XElement section in elements) { //pbVersion is grabbed earlier. It is the version of PowerBuilder if( section.Element("Version").Value.Equals(string.Format("{0}", pbVersion ) ) ) { var files = section.Elements("Files"); var fileList = new List<string>(); foreach (XElement area in files) { fileList.Add(area.Element("File").Value); } } } My issue is that the String List is only ever populated with one value, "EasySoap110.dll", and everything else is ignored. Can someone please help me, as I am at a loss.

    Read the article

  • WPF - Transparency - Stream Desktop Content

    - by Niels Willems
    Greetings I'm in the process of making a Scoreboard for a game (Starcraft II). This scoreboard is being made as a WPF Application with a C# code-behind. I already have a version which works for 90% in WinForms but I lacked the support to easily make it look a lot nicer which are available in WPF. The point of this application will be to form a kind of overlay on top of a running game. This game is in Fulscreen(Windowed Mode) so when in WinForms I coded it so that it should always be on top. It would do so and that was no problem. Since the main look of the app in WPF is based on an image with a transparent background I have set most Background values to Transparent. However when I do this the entire application does not get registered by streaming software. For example it just shows my Desktop or the game I'm playing but not my application even though it IS there. I can see it with my own eyes but the audience on the stream cannot. Does anyone have any experience with this matter because it's really doing my head in. My entire application will be useless if it is not visible on streams. If I have to put the background on a color rather than transparent the UI will be completely demolished as well in terms of looks. I'm basically trying to make a game-overlay in C# & WPF. I have read you can do this on different ways as well but I have little to no knowledge of C++ nor do I know anything about DirectX Thank you for your time reading and your possible insights. Edit: The best solution would be an overlay similar to that one of Steam/Xfire/Dolby Axon. Edit 2: I've had no luck with all the suggestions so I basically made the transparent bits of my image non transparent and let the user decide which one to use depending on what streaming software they would be using.

    Read the article

  • Common "truisms" needing correction the most

    - by Charles Bretana
    In addition to "I never met a man I didn't like", Will Rogers had another great little ditty I've always remembered. It went: "It's not what you don't know that'll hurt you, it's what you do know that ain't so." We all know or subscribe to many IT "truisms" that mostly have a strong basis in fact, in something in our professional careers, something we learned from others, lessons learned the hard way by ourselves, or by others who came before us. Unfortuntely, as these truisms spread throughout the community, the details—why they came about and the caveats that affect when they apply—tend to not spread along with them. We all have a tendency to look for, and latch on to, small "rules" or principles that we can use to avoid doing a complete exhaustive analysis for every decision. But even though they are correct much of the time, when we sometimes misapply them, we pay a penalty that could be avoided by understooding the details behind them. For example, when user-defined functions were first introduced in SQL Server it became "common knowledge" within a year or so that they had extremely bad performance (because it required a re-compilation for each use) and should be avoided. This "trusim" still increases many database developers' aversion to using UDFs, even though Microsoft's introduction of InLine UDFs, which do not suffer from this issue at all, mitigates this issue substantially. In recent years I have run into numerous DBAs who still believe you should "never" use UDFs, because of this. What other common not-so-"trusims" do you know, which many developers believe, that are not quite as universally true as is commonly understood, and which the developer community would benefit from being better educated about? Please include why it was "true" to start off with, and under what circumstances it's not true. Limit responses to issues that are technical, where the "common" application of a "rule or principle" is in fact correct most of the time, or was correct back when it was first elucidated, but—in the edge cases, or because of not understanding the principle thoroughly, because technology has changed since it first spread, or applying the rule today without understanding the details behind the rule—can easily backfire or cause the opposite of the intended effect.

    Read the article

  • What does it mean to say "Instance variables are not over-rided" in java?

    - by Ankit
    I am aware of the concept called field hiding in java. But still I am having a confusion in relation to instance variable being not over-ridden. According to my present knowledge, overriding a method of super-class means that the JVM will call the sub-class's over-ridden method though the super-class's method is available to the sub-class. And I read the similar thing for field hiding via the link:- Hiding Fields So, in any case we are over-ridding the instance if we change the values of the inherited instance variable in the sub-class. I am confused please help. I am using the following super-class:- public class Animal{ File picture; String food; int hunger; int width, height; int xcoord, ycoord; public void makeNoise(){ ......... } public void eat(){ ............. } public void sleep(){ .......... } public void roam(){ ............. } } It has sub-classes like Tiger, cat, dog,hippo etc. The sub-classes over-ride the makeNoise(), eat and roam() method. But each sub-class also uses a different set of values for instance variables. So as per my confusion, I am kind-of overriding all the instance variables and 3 methods of the super-class Animal; and I still have the super-class instance variables available to the sub-class with the use of the super keyword.

    Read the article

  • How do you work around memcached's key/value limitations?

    - by mjy
    Memcached has length limitations for keys (250?) and values (roughtly 1MB), as well as some (to my knowledge) not very well defined character restrictions for keys. What is the best way to work around those in your opinion? I use the Perl API Cache::Memcached. What I do currently is store a special string for the main key's value if the original value was too big ("parts:<number") and in that case, I store <number parts with keys named 1+<main key, 2+<main key etc.. This seems "OK" (but messy) for some cases, not so good for others and it has the intrinsic problem that some of the parts might be missing at any time (so space is wasted for keeping the others and time is wasted reading them). As for the key limitations, one could probably implement hashing and store the full key (to work around collisions) in the value, but I haven't needed to do this yet. Has anyone come up with a more elegant way, or even a Perl API that handles arbitrary data sizes (and key values) transparently? Has anyone hacked the memcached server to support arbitrary keys/values?

    Read the article

  • Will a Ph. D. in Computer Science help?

    - by Francisco Garcia
    I am close to my 30s and still learning about programming and software engineering. Like most people who like their profession I truly believe that I should aim to improve and keep updated. One of the things I do is reading technical papers from professional publications (IEEE and ACM) but I admit there are very good bloggers out there too. Lately I started to think (should I say realize?) that Ph. D people actually are expected to expand constantly their knowledge, but little is expected from lower classes once they know enough This made me think that maybe having a Ph. D will help to have more... respect? but I also believe that I am already getting old for that. Futhermore I see many master and doctor programs that does not seem to add any value over hard experience and self learning. I belive that a degree in computer science, althought not necessary, can lay out a good base for programming work. However: What can a Ph. D. degree give you that you cannot learn on your own? (if you are not into something VERY specific and want to work in a non academic environment)

    Read the article

  • parsing the output of the 'w' command?

    - by Blackbinary
    I'm writing a program which requires knowledge of the current load on the system, and the activity of any users (it's a load balancer). This is a university assignment, and I am required to use the w command. I'm having a hard time parsing this command because it is very verbose. Any suggestions on what I can do would be appreciated. This is a small part of the program, and I am free to use whatever method i like. The most condensed version of w which still has the information I require is `w -u -s -f' which produces this: 10:13:43 up 9:57, 2 users, load average: 0.00, 0.00, 0.00 USER TTY IDLE WHAT fsm tty7 22:44m x-session-manager fsm pts/0 0.00s w -u -s -f So out of that, I am interested in the first number after load average and the smallest idle time (so i will need to parse them all). My background process will call w, so the fact that w is the lowest idle time will not matter (all i will see is the tty time). Do you have any ideas? Thanks (I am allowed to use alternative unix commands, like grep, if that helps).

    Read the article

  • Is there a best practice for concatenating MP3 Files, adjusting sample rates to match, while preserving original files?

    - by Scott
    Hello overflow community! Does anyone know if there is a "best practice" to concatenate mp3 files to create new files, while preserving the original files? I am working on a CentOS Linux machine, in command line. I will eventually call the command line from a PHP script. I have been doing research and I have come up with a process that I think could work. It combines general advice from different forums, blogs, and sources like this one. So here I go: Create a temporary folder Loop through files to create a new, converted copy, of file into a "raw" format (which one, I don't know. I didn't know "raw" files existed before too long ago. I could use some suggestions on this) Store the path to the temporary files, in the temporary folder, and then loop through the files to concatenate them and then put the new merged file the final "processed directory" Delete the contents of the temporary file with the temporary raw files inside. Convert the final file from "raw" to mp3 and enjoy the finished result I'm thinking that this course of action might be best because I can't necessarily control the quality of the original "source" mp3s. The only other option I could think of would be to create a script that would perform a similar process upon files being added to the system leaving only the files with the "proper" format and removing the original "erroneous" file. Hopefully you can see that I have put some thought into this and that I'm trying to leverage the collective knowledge of this community to choose the best direction. Perhaps there is a better path that I could take? By concatenate, I mean to join together in sequence to create a new audio file from the "concatenated files."

    Read the article

  • ecommerce platform or from scratch? customer specific catalogs and purchase orders

    - by rafi
    I have a possible freelance job in front of me for a distributor who wants product ordering set up but the orders are all P.O.s basically - no actual credit card or paypal transaction. The customer is simply billed and the order archived. Customers will need to login to this site and each customer will have their own custom catalog of a few dozen products which have been setup via a control panel this distributor uses. So there will be a master catalog of over 1,000 products (perhaps browsable but not to be ordered from on the site) but each customer will only be able to order from the products specified for their accounts. I know I can build this from scratch but I figured it's worth looking into what ecommerce platforms would get me a nice head start. Obviously shopping cart, order history, catalog management are concepts that I can reuse but are any of the ecommerce systems out there also capable of handling custom catalogs (maybe as multi-stores?) or transactions billed to accounts without credit card? The more I could reuse the better. I've messed with OSCommerce (way back) and a little Zen Cart more recently. I've also worked on a number of totally custom e-commerce sites. But my knowledge of the open source e-commerce tools is pretty limited and I'm trying to keep the effort as simple as I possibly can on this. I'm pretty flexible on the language of the platform by the way. Thanks in advance.

    Read the article

  • Apples, oranges, and pointers to the most derived c++ class

    - by Matthew Lowe
    Suppose I have a bunch of fruit: class Fruit { ... }; class Apple : public Fruit { ... }; class Orange: public Fruit { ... }; And some polymorphic functions that operate on said fruit: void Eat(Fruit* f, Pesticide* p) { } void Eat(Apple* f, Pesticide* p) { ingest(f,p); } void Eat(Orange* f, Pesticide* p) { peel(f,p); ingest(f,p); } OK, wait. Stop right there. Note at this point that any sane person would make Eat() a virtual member function of the Fruit classes. But that's not an option, because I am not a sane person. Also, I don't want that Pesticide* in the header file for my fruit class. Sadly, what I want to be able to do next is exactly what member functions and dynamic binding allow: typedef list<Fruit*> Fruits; Fruits fs; ... for(Fruits::iterator i=fs.begin(), e=fs.end(); i!=e; ++i) Eat(*i); And obviously, the problem here is that the pointer we pass to Eat() will be a Fruit*, not an Apple* or an Orange*, therefore nothing will get eaten and we will all be very hungry. So what I really want to be able to do instead of this: Eat(*i); is this: Eat(MAGIC_CAST_TO_MOST_DERIVED_CLASS(*i)); But to my limited knowledge, such magic does not exist, except possibly in the form of a big nasty if-statement full of calls to dynamic_cast. So is there some run-time magic of which I am not aware? Or should I implement and maintain a big nasty if-statement full of dynamic_casts? Or should I suck it up, quit thinking about how I would implement this in Ruby, and allow a little Pesticide to make its way into my fruit header?

    Read the article

  • Can we run two simultaneous non-nested loops in Perl?

    - by Mike
    Part of my code goes like this: while(1){ my $winmm = new Win32::MediaPlayer; $winmm->load('1.mp3'); $winmm->play; $winmm->volume(100); Do Some Stuff; last if some condition is met; } Problem is: I want the music to be always on when I'm in the Do Some Stuff stage in the while loop. But the length of the music is so short that it will come to a full stop before I go to the next stage, so I want the music to repeat itself, but the Win32::Mediaplayer module does not seem to have a repeat mode, so I'm thinking of doing an infinite loop for the music playing part. Like this: while(1){ my $winmm = new Win32::MediaPlayer; $winmm->load('1.mp3'); $winmm->play; $winmm->volume(100); } while(2){ Do some stuff; last if some condition is met } But based on my current Perl knowledge if I'm in the while(1) part, I can never go to the while(2) part. Even if it comes to a nested loop, I have to do something to break out of the inside loop before going to the other part of the outside loop. The answer to my question "Can we run two simultaneous non-nested loops in Perl?" may be a NO, but I assume there is some way of handling such situation. Correct me if I'm wrong. Thanks as always for any comments/suggestions :) UPDATE I really appreciate the help from everyone. Thanks :) So the answer to my question is a YES, not a NO. I'm happy that I've learned how to use fork() and threads to solve a real problem :)

    Read the article

  • Can this be done using LINQ/Lambda, C#3.0

    - by Newbie
    Objective: Generate dates based on Week Numbers Input: StartDate, WeekNumber Output: List of dates from the Week number specified till the StartDate i.e. If startdate is 23rd April, 2010 and the week number is 1, then the program should return the dates from 16th April, 2010 till the startddate. The function public List<DateTime> GetDates(DateTime startDate,int weeks) { List<DateTime> dt = new List<DateTime>(); int days = weeks * 7; DateTime endDate = startDate.AddDays(-days); TimeSpan ts = startDate.Subtract(endDate); for (int i = 0; i <= ts.Days; i++) { DateTime dt1 = endDate.AddDays(i); dt.Add(dt1); } return dt; } I am calling this function as DateTime StartDate = DateTime.ParseExact("20100423", "yyyyMMdd", System.Globalization.CultureInfo.InvariantCulture); List<DateTime> dtList = GetDates(StartDate, 1); The program is working fine. Question is using C# 3.0 feature like Linq, Lambda etc. can I rewrite the program. Why? Because I am learning linq and lambda and want to implement the same. But as of now the knowledge is not sufficient to do the same by myself. Thanks.

    Read the article

  • Running Different Modules on Tomcat/Server

    - by umesh awasthi
    Hi All, I have started working on my own project idea but on the starting i have strucked in the structure decision may be lack of knowledge is the promary factor. i am wondering how we can make 2 different modules to co-operate on the server.Here is is explanation of what i am trying to ask as per my design i need 2 modules for my application 1. Back end handling where i can do all content handling as well as other admin task a console which will be capable of handling everything from ceating importing contents to everything. 2 USer end which is only an interface to the end user to use the application. to visualize the things its kinda e-commerce application one is back office management and other is user end of web-shop. since these two module will be very much interlinked but i don't want them to mix up i want them to develop independently since admin is one which is core and it will also going to serve user interface. my question is how i can develop two module independently but on the other hand i want them to co-operate to accomplish the task as a whole. Really sorry in advance if i am not making any sense. Thanks in advance

    Read the article

  • How do the major C# DI/IoC frameworks compare?

    - by Slomojo
    At the risk of stepping into holy war territory, What are the strengths and weaknesses of these popular DI/IoC frameworks, and could one easily be considered the best? ..: Ninject Unity Castle.Windsor Autofac StructureMap Are there any other DI/IoC Frameworks for C# that I haven't listed here? In context of my use case, I'm building a client WPF app, and a WCF/SQL services infrastructure, ease of use (especially in terms of clear and concise syntax), consistent documentation, good community support and performance are all important factors in my choice. Update: The resources and duplicate questions cited appear to be out of date, can someone with knowledge of all these frameworks come forward and provide some real insight? I realise that most opinion on this subject is likely to be biased, but I am hoping that someone has taken the time to study all these frameworks and have at least a generally objective comparison. I am quite willing to make my own investigations if this hasn't been done before, but I assumed this was something at least a few people had done already. Second Update: If you do have experience with more than one DI/IoC container, please rank and summarise the pros and cons of those, thank you. This isn't an exercise in discovering all the obscure little containers that people have made, I'm looking for comparisons between the popular (and active) frameworks.

    Read the article

  • Need some advice before starting coding my next iPhone app...

    - by Tom
    Hi! I need some advice about how should I start coding something. So here is the context: I've just finished building a CMS that manage a SQLite database. My application will be picking this database and use its content as the application's content. So far it's pretty simple. The application will have a navigation that will browse through various workflows, and once at the end workflow, it'll show contents from the database. A consultation kind a thing, example: Liquids - Juice - Orange Juice - Informations about Orange Juice. For my SQLite transactions, so far I believe I'll be using fmdb. It looks like a great wrapper. Here's a simple schema from one of the database: Workflow: id: { type: integer(3), primary: true, autoincrement: true } workflow_id: { type: integer(1) } name: { type: string(255) } That table's rows will be my navigations. Do you believe I should use a navigation controller? If so, then how could I generate the navigation tree from it? I have a good working knowledge of Objective-C and Foundation framework, but never went too far with it so that is why I'm asking before starting in the wrong direction :) Thanks a lot.

    Read the article

  • Some questions about dotnetopenauth

    - by chobo2
    Hi I have a couple outstanding questions mainly reguarding twitter and facebook In the FacebookGraph class there are properties such as Id,name,etc. I am wondering how do I add to this list? Like what happens if I want a users hometown? I tried to add a property called hometown but it always is null. What should I store their id(1418) or the whole url(http://www.facebook.com/profile.php?id=1418) for lookup later in my db to grab their data and to see if they have an account with my site? Is it actually good to use this id as it seems like it is common knowledge. Can't someone just find the profile id or whatever and do a fake request on my site? how do you setup dotnetopenauth to deal with the case when a user goes to facebook and deletes access to my website. I know you can send a deauthorization code to your site and then delete their account but I don't know how to do that through dotnetopenauth Twitter Is it possible to do number 4 with twitter? Ajax Is it possible to make the openid stuff ajax? I don't see a sample anywhere in the dotnetopenauth samples.

    Read the article

  • Create a real time web application using .net framework and azure - very confused

    - by test
    Let us say I would like a simple (yet complex) web application where there is continuous READING AND WRITING to the sql azure database. Let us say I am tracking a location, and I would like it to be updated very frequently (lets take the worst case: 1 second). From the little knowledge I have, I think that this involves the use of the database to continuously write the location to the database, and continuously read from the database to update another person through a website. Do you please have any suggestion which technologies can I use? Is there a simple way? I heard about node.js, signalR. I have no idea how to use them, if they are really what I need. the last tutorial I checked out simply uses a while(true) loop..but I don't think that that's something good to keep a thread continuously busy... Do I have to create some background task? Do I have to create some web service? This is a school project and I wish not to go for the most difficult option, but if there is some sort of solution, challenge accepted :) Can you please help me? Since I have asked many questions here and yet I have no solution in mind

    Read the article

  • C/C++ macro/template blackmagic to generate unique name.

    - by anon
    Macros are fine. Templates are fine. Pretty much whatever it works is fine. The example is OpenGL; but the technique is C++ specific and relies on no knowledge of OpenGL. Precise problem: I want an expression E; where I do not have to specify a unique name; such that a constructor is called where E is defined, and a destructor is called where the block E is in ends. For example, consider: class GlTranslate { GLTranslate(float x, float y, float z); { glPushMatrix(); glTranslatef(x, y, z); } ~GlTranslate() { glPopMatrix(); } }; Manual solution: { GlTranslate foo(1.0, 0.0, 0.0); // I had ti give it a name ..... } // auto popmatrix Now, I have this not only for glTranslate, but lots of other PushAttrib/PopAttrib calls too. I would prefer not to have to come up with a unique name for each var. Is there some trick involving macros templates ... or something else that will automatically create a variable who's constructor is called at point of definition; and destructor called at end of block? Thanks!

    Read the article

  • Design by contracts and constructors

    - by devoured elysium
    I am implementing my own ArrayList for school purposes, but to spice up things a bit I'm trying to use C# 4.0 Code Contracts. All was fine until I needed to add Contracts to the constructors. Should I add Contract.Ensures() in the empty parameter constructor? public ArrayList(int capacity) { Contract.Requires(capacity > 0); Contract.Ensures(Size == capacity); _array = new T[capacity]; } public ArrayList() : this(32) { Contract.Ensures(Size == 32); } I'd say yes, each method should have a well defined contract. On the other hand, why put it if it's just delegating work to the "main" constructor? Logicwise, I wouldn't need to. The only point I see where it'd be useful to explicitly define the contract in both constructors is if in the future we have Intelisense support for contracts. Would that happen, it'd be useful to be explicit about which contracts each method has, as that'd appear in Intelisense. Also, are there any books around that go a bit deeper on the principles and usage of Design by Contracts? One thing is having knowledge of the syntax of how to use Contracts in a language (C#, in this case), other is knowing how and when to use it. I read several tutorials and Jon Skeet's C# in Depth article about it, but I'd like to go a bit deeper if possible. Thanks

    Read the article

  • How to maintain ComboBox.SelectedItem reference when DataSource is resorted?

    - by Dave
    This really seems like a bug to me, but perhaps some databinding gurus can enlighten me? (My WinForms databinding knowledge is quite limited.) I have a ComboBox bound to a sorted DataView. When the properties of the items in the DataView change such that items are resorted, the SelectedItem in my ComboBox does not keep in-sync. It seems to point to someplace completely random. Is this a bug, or am I missing something in my databinding? Here is a sample application that reproduces the problem. All you need is a Button and a ComboBox: public partial class Form1 : Form { private DataTable myData; public Form1() { this.InitializeComponent(); this.myData = new DataTable(); this.myData.Columns.Add("ID", typeof(int)); this.myData.Columns.Add("Name", typeof(string)); this.myData.Columns.Add("LastModified", typeof(DateTime)); this.myData.Rows.Add(1, "first", DateTime.Now.AddMinutes(-2)); this.myData.Rows.Add(2, "second", DateTime.Now.AddMinutes(-1)); this.myData.Rows.Add(3, "third", DateTime.Now); this.myData.DefaultView.Sort = "LastModified DESC"; this.comboBox1.DataSource = this.myData.DefaultView; this.comboBox1.ValueMember = "ID"; this.comboBox1.DisplayMember = "Name"; } private void saveStuffButton_Click(object sender, EventArgs e) { DataRowView preUpdateSelectedItem = (DataRowView)this.comboBox1.SelectedItem; // OUTPUT: SelectedIndex = 0; SelectedItem.Name = third Debug.WriteLine(string.Format("SelectedIndex = {0:N0}; SelectedItem.Name = {1}", this.comboBox1.SelectedIndex, preUpdateSelectedItem["Name"])); this.myData.Rows[0]["LastModified"] = DateTime.Now; DataRowView postUpdateSelectedItem = (DataRowView)this.comboBox1.SelectedItem; // OUTPUT: SelectedIndex = 2; SelectedItem.Name = second Debug.WriteLine(string.Format("SelectedIndex = {0:N0}; SelectedItem.Name = {1}", this.comboBox1.SelectedIndex, postUpdateSelectedItem["Name"])); // FAIL! Debug.Assert(object.ReferenceEquals(preUpdateSelectedItem, postUpdateSelectedItem)); } }

    Read the article

  • Ruby core documentation quality

    - by karatedog
    I'm relatively new to Ruby and have limited time therefore I try out simple things. Recently I needed to create a file and because I'm lazy as hell, I run to Google. The result: File.open(local_filename, 'w') {|f| f.write(doc) } Shame on me, it is very straightforward, should have done it myself. Then I wanted to check what ruby magic the File class' methods offer or if there's any 'simplification' when invoking those methods, so I headed for the documentation here, and checked for the File class. 1.8.6 documentation presents me with "ftools.rb: Extra tools for the File class" under 'File' class, which is not what I'm looking for. 1.8.7 documentation seems OK for 'File' class, there are a plethora of methods. Except 'open'. 1.9 documentation finally shows me the 'open' method. And I had an almost same tour with Net::HTTP. Do I exaggerate when I think good old Turbo Pascal's 7.0 documentation was better organized than Ruby documentation is right now? Is there any other source for the uninitiated to collect knowledge? Or is it possible that I just tumbled into a documentation hole and the rest are super-brilliant-five-star organized? Thanks

    Read the article

  • How can I find the jdbc connection timeout of a hibernate session

    - by StevenWilkins
    I currently have a long running thread which uses a hibernate session to perform many updates. We currently have our c3p0 connection timeout set to 20 minutes and it's timing out sometimes because of the number of updates we're performing. The solution I have is to periodically return the connection to the pool via closing the session (we have hibernate configured this way) and get a new one. Upping the timeout is not desirable because the same pool is used for the entire application. The problem is I don't know when to return the connection to the pool because I don't know what the timeout of the connection is. I know what the current setting is in our property file, but that can be changed without my knowledge at any time so it's fragile. Having a counter and returning the connection based on the number of updates I've performed is not ideal but could be my option of last resort. I have a hibernate session, how can I retrieve the connection timeout of the jdbc connection which backs the session? Using the SessionFactory and SessionFactoryImpl classes are perfectly acceptable.

    Read the article

  • How to get acts on taggable working

    - by Schipperius
    I am new to ruby on rails (and programming) and this is probably a really stupid question. I am using Rails 3.2 and trying to use acts_as_taggable_on to generate tags on articles and to have those tags show on article index and show pages as a clickable links. I have tags clickable on both the article show and index pages, but the links just go back to the index page and don't sort according to the tag name. I have scoured the Internet and pieced together the code below from various sources, but I am clearly missing something. Any help is greatly appreciated, as I have exhausted my seemingly limited knowledge! Thanks. Here is what I have: class ArticlesController < ApplicationController def tagged @articles = Article.all(:order => 'created_at DESC') @tags = Article.tag_counts_on(:tags) @tagged_articles = Article.tagged_with(params[:tags]) respond_to do |format| format.html # index.html.erb format.json { render :json => @articles } end end def index @article = Article.new @articles = Article.paginate :page => params[:page], :per_page => 3 @tags = Article.tag_counts_on(:tags) respond_to do |format| format.html # index.html.erb format.json { render json: @articles } end end module ArticlesHelper include ActsAsTaggableOn::TagsHelper end class Article < ActiveRecord::Base acts_as_ordered_taggable acts_as_ordered_taggable_on :tags, :location, :about attr_accessible :tag_list scope :by_join_date, order("created_at DESC") end article/index.html.erb <% tag_cloud(@tags, %w(tag1 tag2 tag3 tag4)) do |tag| %> <%= link_to tag.name, articles_path(:id => tag.name) %> <% end %> article/show.html.erb <%= raw @article.tags.map { |tag| link_to tag.name, articles_path(:tag_id => tag) }.join(" | ") %>

    Read the article

< Previous Page | 380 381 382 383 384 385 386 387 388 389 390 391  | Next Page >