Search Results

Search found 26509 results on 1061 pages for 'network manager'.

Page 384/1061 | < Previous Page | 380 381 382 383 384 385 386 387 388 389 390 391  | Next Page >

  • Two DHCP interfaces asigned to two default gateways to OS

    - by user140600
    I have a Ubuntu box that has two networking interfaces (eth0 and wlan0). They are both configured for DHCP in /etc/network/interfaces, but they both assign a default gateway: /etc/network/interfaces auto lo iface lo inet loopback auto eth0 iface eth0 inet dhcp auto wlan0 iface wlan0 inet dhcp wireless-essid test Result of route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 0.0.0.0 172.16.1.1 0.0.0.0 UG 100 0 0 wlan0 0.0.0.0 10.0.0.1 0.0.0.0 UG 100 0 0 eth0 10.0.0.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 172.16.1.0 0.0.0.0 255.255.255.0 U 0 0 0 wlan0 How can I set up /etc/network/interfaces to have only one default gateway, on the interface I want? Worst case scenario, how can I at least control which one gets on top on the route -n command, each boot? Note: This box will travel a lot, and will be connected to different networks, so I don´t know in advance the IP addresses/ranges it will have. Sometimes the default gw interface will be eth0. Sometimes it will be wlan0 ... So, this needs to be kind of automatic ...

    Read the article

  • All application passwords lost on Windows 7

    - by Rynardt
    A couple of days ago I changed my Windows 7 login password. My laptop is on my company's domain, so password changes are done over the internal network. Since changing the password I noticed that all my saved Chrome passwords are missing. Also Skype, Windows Live, Internet Explorer and Outlook lost their saved passwords. I guess there could be more applications with lost passwords, but I have not opened them yet. This makes me think that most applications saves their passwords to a general password vault on the Windows system and this vault got somehow corrupted when I changed my domain login password for windows. Do anyone have any idea of how to fix this and prevent it from happening again? EDIT : More Info I do development work at the office, so most of the time I bypass the firewall and connect directly to the internet gateway. Now and then I would connect to the company wifi network to do printing and access files on a NAS. So by default my laptop does not connect to the wifi hotspot. On this occasion to update the password, I had to connect to the wifi. So referring to the comment by OmnipotentEntity below, could this have happened when the system rebooted without a connection to the network as the laptop does not auto connect to the wifi hotspot?

    Read the article

  • Webcam and drivers for it don't work on Win8

    - by Frantumn
    The webcam on my Asus G51Jx doesn't work now that I've upgraded to Windows 8. I've looked on the Asus site, but they don't seem to have drivers for Windows 8 yet. At least on my machine. I've tried - Using the windows 7 drivers, but the installers aren't compatible. - Automatically detecting new hardware with the metro device manager - Automatically detecting new hardware with the classic windows device manager - using all available drivers for my laptop on the Asus site. Does anyone have any ideas that don't revolve around waiting for official release drivers?

    Read the article

  • Implementing an isolated guest WLAN via IPSec VPN on Windows

    - by sysadmin1138
    We are attempting to set up a guest WLAN network that is isolated from the rest of our network. This is proving difficult due to a couple of technical reasons. My first choice was to use a separate VLAN, on which our Firewall's handy WLAN port would handle DHCP, DNS and the network isolation we need. Unfortunately, due to the fact that our main office and our Internet connection itself are in different locations connected by way of a Metro Ethernet connection, I'm at the mercy of our ISP for VLAN transit. They won't pass a second VLAN between our two sites. And my hardware doesn't support 802.1ad "Q-in-Q", which would also solve this problem. So I can't use the VLAN method for isolation. At least not without spending money. As our Firewall can handle IPSec site-to-site VPN connections, I hope it is possible to connect a Server 2008R2 (standard) server I have in the office location to the WLAN and provide gateway services to the firewall. Thusly: Unfortunately, I don't know if it is possible to connect the two this way. The firewall has a pretty flexible IPSec/L2TP implementation (I've used it to connect iPads in the wild), but is neither Kerberized or supports NTLM. The Connection Security Rules view on the Windows server seems to get close to what I think needs to be done, but I'm failing on figuring out how to get it to do what I need it to do. Is this even possible, or do I need to pursue alternate solution?

    Read the article

  • Why are ISP's installing routers on my site when the feed is a form of ethernet already?

    - by Cosmin Prund
    I'm connected to 3 ISP's right now. Two of them already have routers at my site, the third one announced me "they need to install some equipment" when I requested BGP session. I can only assume they need to install a Router, since that connection is now working fine, using the usual /30 net block for the connection, and the "last-mile" solution is not going to change since they only installed it last week and the BGP was in the contract from the beginning. I simply don't understand this: the "feed" is already a form of ethernet. Even those they're using different technologies for the last mile, they're all entering the ISP router using an RJ45 WAN port. I assume the ISP router does something really important that can't be done by the Big Router on the other end of the connection. It must also be something that can hurt them if miss-configured, since they don't trust us (the client) to do the stuff on our router. And I'm not talking cheap throw-away routers here: One of the routers is Cisco 2800. Edit to add network details: I'm connected to 3 ISP's, two over Radio links, one over Fiber Optic. One of the radio links is going to get dropped and the other radio link will be turned into fiber sometime next year. The fiber is 20 Mbit, radio 1 is 40 Mbit and radio 2 is 2 Mbit. I've got a /24 of provider independent address space. I'm not doing out-of-the ordinary stuff with my network, I'm overly connected because my network needs to be "up" all the time.

    Read the article

  • Server 2008 R2 domain windows update strategy

    - by Joost Verdaasdonk
    Let me explain my question a bit. We are a small company that have now made the first move to a bigger network. For now the network contains of 5 servers 2008 R2 (dc,sql,web,etc..). Everything we need is now in place but for now we cannot afford to finish the network by implementing redundant systems. (secondary dc, dns, sql cluster, etc...) For some people this is hard to understand but this is the current situation. (and we are aware and will fix this when we can) Because we want to keep our system secure and up to date I've made sure that all systems are updated regularly. The problem is ofc that the nr of updates Microsoft rolls out that need a system reboot seam to occur more often. (maybe I'm wrong and it just feels like this) ;-) In our domain servers depend on each other for services (like SQL, WEB, or whatever) so just rebooting a server at will is NOT a good idea! For now I update all of them without rebooting at once. After all are up to date I bring them down in the order they are depended on each other. After this I reboot all of them in the inverse order. I understand ofc that if I DID have redundancy in my system that updating and rebooting would not be such a problem because the server task could be taken over by another node but this is something we generally need to add when we can. So my question is. If you read my above situation can you suggest me more Update strategies or general ideas that could help me do this process in a better / faster way? Thanks for your thoughts!

    Read the article

  • W3c Markup Validator on Windows 2003 with Apache

    - by rihatum
    Hi All, OS = Windows 2003 (latest sp / hotfixes etc) Perl = Active Perl 5.8.9 Build 825 Apache 2.2.11 Followed the following How-To: http://validator.w3.org/docs/install_win.html Facing the following errors : (had an html error too, but I used Perl Package manager to upgrade the required package. Now, the Package manager isn't showing any update of the following package and some others too : SGML::Parser::OpenSP version 0.991 required--this is only version 0.99 at C:/www/validator/httpd/cgi-bin/check line 61. Q : How can I download the latest package for OpenSP ? Q : Would It be just a matter of click and install the package? If someone can provide a step by step that would be very helpful, I am not fluent with building perl packages. Thanks and Regards

    Read the article

  • Connecting multiple access points

    - by mohsen farahanipoor
    I'm working on a big project. We want to create a wireless network throughout the building with 15 floors. My idea is that we should set up one unified wireless access point at least in each floor...in case of signal attenuate, we use Access point extender/repeater. I selected DWL-6600AP from among D-Link industrial access points. I want to implement a single wireless LAN throughout the building. Is it possible to combines multiple DWL-6600 access points to achieving just a single WLAN? Can a wireless switch controller do this task? Can these Access Points interfere with each other? What is the solution? I read D-Link website's learning materials, but I am still confused. My other question is around the connecting these APs to Wireless Switch Controller - Is it possible to use power line for connecting DWL-6600 to Wireless Switch Controller device? My main goal is that clients with portable devices such as laptops should be easily connected to the network to share & have communication without any more manual configuration as they are already connected to a single network.

    Read the article

  • Technology mash: is this possible?

    - by Jon Story
    I'm in the process of setting up my own DNS+hosting on a couple of VPS and my home machines, mostly for academic/learning purposes, but also for convenient accessing of my files, hosting my personal websites, private git repositories etc. I've got a main web server with DNS, and a slave DNS server. I've also got a couple of machines at home doing file hosting, video streaming and all that fun stuff. I'm intending to use my VPS's to provide myself with a dynamic DNS system so that I can point mydomain.com at my DNS servers, with home.mydomain.com going into my home network via a raspberry pi. HOWEVER.... I've not got access to the network infrastructure at home (rented accommodation with managed internet), so I can't forward the ports on the router to my own machines. As such, I'm wondering if it's possible to route all the traffic via an SSH/HTTP tunnel through one of the VPS? My plan is to have the raspberry pi provide a VPN into my home network. The raspberry pi uses SSH to connect to the VPS, and the VPS forwards any traffic to home.mydomain.com via the tunnel to the raspberry pi. Is this even possible, and how do I go about it? I don't mind getting my hands dirty with coding and low level tools, I'm just not sure where to start or what the best way to go about it is.

    Read the article

  • Using Different Networks with Different Proxy Servers on Windows 7

    - by John
    Hi, I have a laptop running Windows 7 Professional. There are two wireless networks I connect to every day: Home: no proxy server Work: proxy server with authentication On my iPad and iPhone, I've got two WiFi network profiles (one for home, one for work). The work one has the proxy server settings specified. The home one has no proxy specified. It all works great and I don't need to go changing settings around whenever I move from home to work or vice versa. On my laptop, however, I can't seem to get this going. I can certainly connect to both networks, but when I'm at work I have to go and change the proxy settings (in Internet Options) to be able to use the network. When I'm at home, I have to then go and turn them off. It's a small thing, but considering this is something I have to do every day, it's a bit annoying. Is there any way I can make Windows automatically switch proxy settings on or off based on the network I'm connected to? Thanks, John

    Read the article

  • How do I configure VMware View location-based printing to use Active Directory Groups?

    - by Jason Pearce
    I am attempting to configure VMware View 4.5's Location-Based Printing, which leverages an included OEM version of ThinPrint, to assign printers to active directory groups. The location-based printing feature maps printers that are physically near client systems to VMware View desktops. I am using the Active Directory group policy setting AutoConnect Location-based Printing for VMware View, which is located in the Microsoft Group Policy Object Editor in the Software Settings folder under Computer Configuration. The AutoConnect Location-based Printing for VMware View appearst to be just a name translation table. It permits me to assign a specific printer or printers to an IP Range, Client Name, Mac Address, User, or User Group. I'm attempting to assign printers to active directory user groups. I have created a new active directory group for each printer that I intend to use in VMware View desktop pools. I will then assign active directory users to the active directory groups that represent each network printer. Example: doej is a member of the PTR-FLOOR2-NORTH-ROOM255 active directory group. Using AutoConnect, I assigned the group to receive a network printer by adding PTR-FLOOR2-NORTH-ROOM255 in the User/Group column. Problem: When doej logs in to his VDI session, the printer is not present. However, if I use a wildcard "*" in the User/Group column instead of the specific PTR-FLOOR2-NORTH-ROOM255 active directory group, the printer is present and functions as designed. Alternatives: I have tried assigning printers to active directory groups within AutoConnect in the following ways, all unsuccesfull: PTR-FLOOR2-NORTH-ROOM255 domainexample\PTR-FLOOR2-NORTH-ROOM255 domainexample.local\PTR-FLOOR2-NORTH-ROOM255 Confirmation: The information used to map the printer to the VMware View desktop is stored in a registry entry on the View desktop in HKEY_LOCAL_MACHINE\SOFTWARE\Policies\thinprint\tpautoconnect. For each of these examples, I have reviewed the registry entry and can confirm that the desktop is receiving the information from the AutoConnect translation table. Summary: Can anyone provide an example of how to configure VMware View 4.5's Location-Based Printing so that I may assign network printers to active directory groups via the included AutoConnect tool? I would welcome a clear example of a working configuration. Thank you.

    Read the article

  • Resizing partition in Windows 7: how long does it take?

    - by PaulJ
    Okay, maybe this is me worrying about nothing, but... I have a 500 Gb. external drive where I want to create a second partition. I plug it into my Windows 7 box, use Disk Manager and pick the "Shrink Volume" option. It says that the maximum amount to shrink is around 150 Gb. I hit "OK" and it starts working... and it's been going on for about half an hour. The light of the external HD is constantly working. Disk Manager is greyed out and has the "does not respond" message on the top bar; basically, it's behaving as a non-responding application. Is this normal for a drive of this size, or did the application hang? How long would it typically take for a drive like this to resize its partition?

    Read the article

  • How can I setup a Proxy I can sniff traffic from using an ESX vswitch in promiscuous mode?

    - by sandroid
    I have a pretty specific requirement, detailed below. Here's what I'm not looking for help for, to keep things tidy and on topic: How to configure a standard proxy Any ESX setup required to facilitate traffic sniffing How to sniff traffic Any changes in design (my scope limits me) I need to setup a test environment for a network-sniffing based HTTP app monitoring tool, and I need to troubleshoot a client issue but he only has a prod network, so making changes to the config on client's system "just to try" is costly. The goal here is to create a similar system in my lab, and hit the client's webapp and redirect my traffic - using a proxy - into the lab environment. The reason I want to use a proxy is so that only this specific traffic is redirected for all to see, and not all my web traffic (like my visits to serverfault :P). Everything will run inside an ESX 4.1 machine. In there, there is a traffic collection vswitch in promiscuous mode that is not on the local network for security reasons. The VM containing our listening agent is connected to this vswitch. On the same ESX host, I will setup a basic linux server and install a proxy (either apache + mod_proxy or squid, doesn't matter). I'm looking for ideas on how to deploy this for my needs so I can then figure out how to set it up accordingly. Some ideas I've had were to setup two proxies, and have them talk to eachother through this vswitch in promiscuous mode, but it seems like alot of work. Another idea is a dual-homed proxy, but I've never seen/done that before so I'm not sure how doable it is for what I'd like. I am OK with setting up a second vswitch in promiscuous mode to facilitate this if need be, but I cannot put the vswitch on the lan (which is used so my browser would communicate with the proxy) in promiscuous mode. Any ideas are welcome.

    Read the article

  • ProCurve ACL to prevent a subnet from leaving the switch

    - by kce
    I have a single HP ProCurve 2610 in a remote location that is connected in with the rest of the network via SHDSL. There are two Layer-3 networks on this segment. ACLs are setup to deny one subnet (192.0.2.0/24) from ever being able to leave the switch by virtue of being applied to port attached to the upstream connection. The other subnet should be permitted to freely leave the switch. Both subnets are on the same VLAN. Unfortunately SFlow very clearly show broadcast traffic from 192.0.2.0/24 on the upstream connection. ProCurve ACLs are not my strong suit but I feel like I'm missing something very simple here. ip access-list extended "Filter for Camera Network" deny ip 192.0.2.0 0.0.0.255 0.0.0.0 255.255.255.255 log permit ip 0.0.0.0 255.255.255.255 0.0.0.0 255.255.255.255 exit interface 24 name "DSL - UPLINK" access-group "Filter for Camera Network" in exit Unless I am mistaken traffic from 192.0.2.0/24 should be dropped as it crosses the uplink port (int 24) whereas all other traffic will be permited by the following default allow rule. What exactly am I missing here? EDIT: Firstly, why do you have two subnets contained in the same VLAN? Because that's how it was configured by a previous administrator and while it makes conceptual sense that a single subnet is "mapped" to a single VLAN there's no technical constraint that I am aware of that makes this have to be the case. Instead of filtering inbound traffic on your uplink, you should be filtering outbound traffic. The HP2600 series can only filter inbound traffic on interfaces. Should I change my filter to deny any to 192.0.2.0/24?

    Read the article

  • Route return traffic to correct gateway depending on service

    - by Marnix van Valen
    On my office network I have two internet connections and one CentOS server running a website (HTTPS on port 443). The website should be publicly accessible through the public IP of the first internet connection (ISP-1). The other internet connection, ISP-2, id the default gateway on the network. Both internet connections have routers (the household-kind) with NAT, SPI firewalls etc. The router on ISP-2 is a Netgear WNDR3700 (aka N600) with original firmware. The problem is that the website is unreachable. Looks like incoming traffic on ISP-1 will reach the server but the returning traffic is routed through ISP-2, effectively making the site unreachable. As far as I can tell I can't do port based routing on the WNDR3700. What are my options to make this work? I've been looking at implementing an iptables / routing based solution on the server itself but haven't been able to make that work. Update: Note that the server has one network interface connecting it to both routers.

    Read the article

  • How do I restore the default applets to Gnome's notification area?

    - by gbacon
    I have a fresh install of Karmic Koala. In a botched attempt at trying to change my default window manager, I somehow removed at least three applets from the notification area: network manager (nm-applet), volume control (gnome-volume-control-applet), and the battery meter (???). Now if I logout and back in, these applets don't run, but I can start them from the command line. Because it's a fresh install, I completely removed my luser account and home directory. After recreating my account, I was frustrated to find that the applets are still missing and no obvious way to add them back. How can I restore the default configuration?

    Read the article

  • Certificate revocation check fails for non-domain guest in spite of accessible CRL

    - by 0xFE
    When we try to use certificates on computers that are not part of the domain, Windows complains that The revocation function was unable to check revocation because the revocation server was offline. However, if I manually open the certificate and check the CRL Distribution Point property, I see an ldap:/// URL and an http:// URL that points to externally-accessible IIS site that hosts the CRLs. Of course, the non-domain-joined client cannot access the ldap:/// URL, but it can download the CRL from the http:// link (at least in a browser). I enabled CAPI logging and I see the event that corresponds to this failed revocation check. The RevocationInfo section is: RevocationInfo [ freshnessTime] PT11H27M4S RevocationResult The revocation function was unable to check revocation because the revocation server was offline. [ value] 80092013 CertificateRevocationList [ location] UrlCache [ url] http://the correct URL [fileRef] 6E463C2583E17C63EF9EAC4EFBF2AEAFA04794EB.crl [issuerName] the name of the CA Furthermore, I can see the HTTP request to the correct URL and the server's response (HTTP 304 Not Modified) with Microsoft Network Monitor. I ran certutil -verify -urlfetch, and it seems to show the same thing: the computer recognizes both URLs, tries both, and even though the http:// link succeeds, returns the same error. Is there a way to have non-domain-joined clients skip the ldap:/// link and only check the http:// one? Edit: The ldap:/// URL is ldap:///CN=<name of CA>,CN=<name of server that is running the CA>,CN=CDP,CN=Public Key Services,CN=Services,CN=Configuration,DC=<domain name>?certificateRevocationList?base?objectClass=cRLDistributionPoint The non-domain-joined clients may be on the domain network or on an external network. The http:// CDP is accessible from the public internet.

    Read the article

  • How do I share a complete XP disk so it can be seen from a Windows 7 system? (To move all files to a

    - by Ian Ringrose
    This should be easier! (both computers can see the internet etc so I know the network it’s self is working) I have a normal home network with a Windows XP machine on it and the new Windows 7 (64 bit) machine. So I can transfer the files to the new Windows 7 machine, I wish to share the complete disk (and all files) from the Windows XP machine and access them from the Windows 7 machine. Is there a step by step set of instructions for doing this anywhere? So fare I have: put both computers into the same workgroup put the windows 7 machine into work network mode so it can see the XP machine in the work group shared the XP disk as read only But when I try to access a lot of the folders on the XP disks, I am told I am not allowed to access them. (I was not asked for any passwords by the windows 7 machine when I accessed the XP machine. The XP machine just has its default account with no password set on it) The XP machine runs XP home and hence has "simple file shairing" turn on. So it seems that even if I create a admin account (with password) and connect with that account, it still comes in as "guest" on the XP machine. Chooseing to share the folder I want access to rather then the top of the disk drive seems to work, but is a pain as I need to share each user's folder with a different share name. If the new computer was not a laptop, I would just plug the hard disk from the old machine into it, but being a laptop I don't have that option.

    Read the article

  • Setup windows 2012 AD in Hyper-V for a Test environment

    - by hub
    Im trying to setup a Windos 2012 R2 test environment on my work computer (a laptop). I have a AD, DHCP and DNS server on server A, and a client connecting to the doman and that works. The client can ping the AD server and gets a valid IP adress. If I ping google.com from the client I get the IP adress but I dont get any responses (request time out). If i ping google.com from server A it works as it should. Server A have a connection to the Internet through a "external network switch" in hyper-v, which gets its internet from a router and the client is connected to a "internal network switch". May the poblem be that server A is behind a router? Can I make this solution to work regadless the network my laptop is connected to? At home i have one IP adress, at work its a totally different range. What I would like is to use my laptops internet connection, regardless wifi or wired, to act as incomming internet, is this possible?

    Read the article

  • Hyper-V Virtual Disk Creation Taking Forver

    - by mnemosyn
    After some struggle, I finally managed to set up Hyper-V 2008 R2 on our server. So I connected to it using the Hyper-V Manager from a Windows 7 client and used the "New Virtual Machine Wizard". I set up a 350GB virtual hard disk. So I hit the "finish" button and the Hyper-V manager has been working for 24hours now, showing merely a dialog "Creating Disk". A console on the Hyper-V still reports 99.9% free space on the HD, but the machines HD LED flashes from time to time (making a rather idle impression, it's not flashing frenetically). Does this usually take this long? Is there a way to find out whether it's still working or just idling? Should I repeat the process? Guides on the net tell me to be patient, but 1d seems a bit extreme!?

    Read the article

  • OS X server 10.6 - how to restore default groups?

    - by Zoran Simic
    I've set up my OS X server as an open directory master first, then (experimenting), I've changed it to standalone server, then set it back as an open directory master again. Now, all the default groups I saw before are gone (Domain Administrators, Domain users etc). Do you know how to restore these groups? Note that the groups are gone only from the Workgroup Manager UI. They do seem to be still there otherwise. id -G gives the usual list of groups. If I create an account and makes its primary group 'staff', Workgroup Manager shows all the inherited groups properly (but not on the main list). If I create an account and associate it to a new group I just created, then the account has no inherited groups...

    Read the article

  • Port knocking via SSH tunnels

    - by j0ker
    I have a server running in my university's internal network. There is only one SSH daemon running which is secured by port knocking with knockd. Works fine if I try to connect from within the internal network. But since the server has no external IP, I have to tunnel into the internal network every time I want to access the server from outside. And since tunneling only works for a single port I cannot do the port knocking as easily as from an internal client. In fact, I don't get it to work at all. What I'm trying is opening tunnels for all the different ports that have to be knocked. Then I send TCP-SYN packets into the tunnels. But that doesn't work even for a single port. If I establish the tunnel on the first port in the knock sequence and send a packet through it, it doesn't reach the server. There is no entry in the log file of knockd, while there should be something like 123.45.67.89: openSSH: Stage 1 (as shown with internal knocks). So I guess, the problem doesn't exist within my knocking script but is a more general one. Are there any known problems with what I'm trying to do? Is it even possible or am I missing something? Thanks in advance!

    Read the article

  • RPC Server Unavailable on Hyper-V cluster when moving resources after the host adapter has failed

    - by Doug Luxem
    On a Windows 2008 R2 SP1 cluster running Hyper-V, a lost network connectivity on the primary host interface. The interface was rapidly flapping up and down, and this was later determined to be caused by a faulty switch port. As this was a clustered server, the host interface was not fault tolerant (seeing as how the whole server was fault tolerant), so connectivity to the host was going up and down. The Hyper-V guests were completely unaffected by the network outage as they used a dedicated trunk on the server separate from the host interface. Additionally, dedicated interfaces for the cluster and live migration networks were fine. In order to diagnose the server, I tried to move all resources (Hyper-V Guests) to other nodes through Failover Cluster Manager. These moves failed with an error RPC Server Unavailable. The only way to move resources was by shutting down the guests, stopping the cluster service on the Node A, allowing other nodes to take ownership of the resources, and restarting the guests. A few other notes: All nodes have Client for MS Networks and File & Printer Sharing enabled on the Cluster and LM networks. Node A was accessible over cluster and LM networks from other nodes (these are private, cluster-only networks); pingable, CIFs, etc. Accessing \\NODEA is done over the Host adapters, as you would expect in this case and is the reason for the RPC Server Unavailable error with that adapter being down. My questions here are - Is there a way to still use Live Migration in a failure scenario such as this to prevent shutting down the Hyper-V guests? How can the network be reconfigured in the future so that the cluster service attempts to use the cluster and/or live migration networks to issue the RPC requests?

    Read the article

  • SQL2005 reporting server: intense security activity

    - by David Wimbush
    On my reporting server the Security log shows large numbers of Logon/Logoff events, often 10 or more, when you run pretty much any report in the Report Manager. Is this normal or is it a classic sign of having the wrong setup? Some system details: Windows Server 2003 R2 SP2, virtual server running under VMWare). SQL Server 2005 SP3 Standard Edition, running databases, Report Manager, and Ananlysis Services cubes. No other major services on the machine (i.e. it's not a domain controller, Exchange server or anything like that). Any ideas, please, guys?

    Read the article

  • High memory utilization by sqlservr.exe process

    - by abdul samad
    Sub:High memory utilization by sqlservr.exe process. When I look into task manager --processes or by using perfmon memory counters(Sqlserver:memory manager:Target server memory and Total server memory) I am getting high memory utilization by sqlservr.exe process nearly 8 GB (Target server memory counter) and 7.95 GB (Total server memory). and when I restart the MSSQLSERVER service it again shoots up to the same size. I am getting this issue quite frequently. Please help me out in identifying why sql server is using so much memory and how to find out what query , stored procedure etc is making sql server use that much memory. * I am not using any triggers or cursors in my code. Thanks

    Read the article

< Previous Page | 380 381 382 383 384 385 386 387 388 389 390 391  | Next Page >